[U-Boot] [PATCH] arm: ls1021atwr: Enable RGMII TX/RX clock internal delay for AR8033

[U-Boot] [PATCH] arm: ls1021atwr: Enable RGMII TX/RX clock internal delay for AR8033

[Alison Wang]

Since commit ce412b7, RGMII TX clock internal delay is not enabled for
AR8033 unconditionally. On LS1021ATWR board, the third port eTSEC3 uses
AR8033 in RGMII mode. The TX/RX internal delay needs to be enabled.

This patch will set PHY_INTERFACE_MODE_RGMII_ID to enable RGMII TX/RX
clock internal delay for AR8033 on the third port.

Signed-off-by: Alison Wang <alison.wang@nxp.com>
---
 board/freescale/ls1021atwr/ls1021atwr.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/board/freescale/ls1021atwr/ls1021atwr.c b/board/freescale/ls1021atwr/ls1021atwr.c
index d96fd77..ff32d5c 100644
--- a/board/freescale/ls1021atwr/ls1021atwr.c
+++ b/board/freescale/ls1021atwr/ls1021atwr.c
@@ -273,6 +273,7 @@ int board_eth_init(bd_t *bis)
 #endif
 #ifdef CONFIG_TSEC3
 	SET_STD_TSEC_INFO(tsec_info[num], 3);
+	tsec_info[num].interface = PHY_INTERFACE_MODE_RGMII_ID;
 	num++;
 #endif
 	if (!num) {
-- 
2.1.0.27.g96db324