* [PATCH] ARM: dts: vexpress: fix few unit address format warnings
@ 2017-04-18 17:45 ` Sudeep Holla
0 siblings, 0 replies; 4+ messages in thread
From: Sudeep Holla @ 2017-04-18 17:45 UTC (permalink / raw)
To: linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
devicetree-u79uwXL29TY76Z2rM5mHXA
Cc: Sudeep Holla, Liviu Dudau, Lorenzo Pieralisi
This patch fixes the following set of warnings on vexpress platforms:
sysreg@010000 simple-bus unit address format error, expected "10000"
sysctl@020000 simple-bus unit address format error, expected "20000"
i2c@030000 simple-bus unit address format error, expected "30000"
aaci@040000 simple-bus unit address format error, expected "40000"
mmci@050000 simple-bus unit address format error, expected "50000"
kmi@060000 simple-bus unit address format error, expected "60000"
kmi@070000 simple-bus unit address format error, expected "70000"
uart@090000 simple-bus unit address format error, expected "90000"
uart@0a0000 simple-bus unit address format error, expected "a0000"
uart@0b0000 simple-bus unit address format error, expected "b0000"
uart@0c0000 simple-bus unit address format error, expected "c0000"
wdt@0f0000 simple-bus unit address format error, expected "f0000"
Cc: Liviu Dudau <liviu.dudau-5wv7dgnIgG8@public.gmane.org>
Cc: Lorenzo Pieralisi <lorenzo.pieralisi-5wv7dgnIgG8@public.gmane.org>
Signed-off-by: Sudeep Holla <sudeep.holla-5wv7dgnIgG8@public.gmane.org>
---
arch/arm/boot/dts/vexpress-v2m-rs1.dtsi | 24 ++++++++++++------------
arch/arm/boot/dts/vexpress-v2m.dtsi | 24 ++++++++++++------------
arch/arm/boot/dts/vexpress-v2p-ca15-tc1.dts | 2 +-
arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts | 18 +++++++++---------
arch/arm/boot/dts/vexpress-v2p-ca5s.dts | 2 +-
arch/arm/boot/dts/vexpress-v2p-ca9.dts | 2 +-
6 files changed, 36 insertions(+), 36 deletions(-)
Hi,
I observed few warning in linux-next due to the enhanced DTC checks
introduced with DTC upgrade in linux-next. The patch fixes few warnings
Regards,
Sudeep
diff --git a/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi b/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi
index 3086efacd00e..35714ff6f467 100644
--- a/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi
+++ b/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi
@@ -71,7 +71,7 @@
#size-cells = <1>;
ranges = <0 3 0 0x200000>;
- v2m_sysreg: sysreg@010000 {
+ v2m_sysreg: sysreg@10000 {
compatible = "arm,vexpress-sysreg";
reg = <0x010000 0x1000>;
@@ -94,7 +94,7 @@
};
};
- v2m_sysctl: sysctl@020000 {
+ v2m_sysctl: sysctl@20000 {
compatible = "arm,sp810", "arm,primecell";
reg = <0x020000 0x1000>;
clocks = <&v2m_refclk32khz>, <&v2m_refclk1mhz>, <&smbclk>;
@@ -106,7 +106,7 @@
};
/* PCI-E I2C bus */
- v2m_i2c_pcie: i2c@030000 {
+ v2m_i2c_pcie: i2c@30000 {
compatible = "arm,versatile-i2c";
reg = <0x030000 0x1000>;
@@ -119,7 +119,7 @@
};
};
- aaci@040000 {
+ aaci@40000 {
compatible = "arm,pl041", "arm,primecell";
reg = <0x040000 0x1000>;
interrupts = <11>;
@@ -127,7 +127,7 @@
clock-names = "apb_pclk";
};
- mmci@050000 {
+ mmci@50000 {
compatible = "arm,pl180", "arm,primecell";
reg = <0x050000 0x1000>;
interrupts = <9 10>;
@@ -139,7 +139,7 @@
clock-names = "mclk", "apb_pclk";
};
- kmi@060000 {
+ kmi@60000 {
compatible = "arm,pl050", "arm,primecell";
reg = <0x060000 0x1000>;
interrupts = <12>;
@@ -147,7 +147,7 @@
clock-names = "KMIREFCLK", "apb_pclk";
};
- kmi@070000 {
+ kmi@70000 {
compatible = "arm,pl050", "arm,primecell";
reg = <0x070000 0x1000>;
interrupts = <13>;
@@ -155,7 +155,7 @@
clock-names = "KMIREFCLK", "apb_pclk";
};
- v2m_serial0: uart@090000 {
+ v2m_serial0: uart@90000 {
compatible = "arm,pl011", "arm,primecell";
reg = <0x090000 0x1000>;
interrupts = <5>;
@@ -163,7 +163,7 @@
clock-names = "uartclk", "apb_pclk";
};
- v2m_serial1: uart@0a0000 {
+ v2m_serial1: uart@a0000 {
compatible = "arm,pl011", "arm,primecell";
reg = <0x0a0000 0x1000>;
interrupts = <6>;
@@ -171,7 +171,7 @@
clock-names = "uartclk", "apb_pclk";
};
- v2m_serial2: uart@0b0000 {
+ v2m_serial2: uart@b0000 {
compatible = "arm,pl011", "arm,primecell";
reg = <0x0b0000 0x1000>;
interrupts = <7>;
@@ -179,7 +179,7 @@
clock-names = "uartclk", "apb_pclk";
};
- v2m_serial3: uart@0c0000 {
+ v2m_serial3: uart@c0000 {
compatible = "arm,pl011", "arm,primecell";
reg = <0x0c0000 0x1000>;
interrupts = <8>;
@@ -187,7 +187,7 @@
clock-names = "uartclk", "apb_pclk";
};
- wdt@0f0000 {
+ wdt@f0000 {
compatible = "arm,sp805", "arm,primecell";
reg = <0x0f0000 0x1000>;
interrupts = <0>;
diff --git a/arch/arm/boot/dts/vexpress-v2m.dtsi b/arch/arm/boot/dts/vexpress-v2m.dtsi
index c6393d3f1719..1b6f6393be93 100644
--- a/arch/arm/boot/dts/vexpress-v2m.dtsi
+++ b/arch/arm/boot/dts/vexpress-v2m.dtsi
@@ -70,7 +70,7 @@
#size-cells = <1>;
ranges = <0 7 0 0x20000>;
- v2m_sysreg: sysreg@00000 {
+ v2m_sysreg: sysreg@0 {
compatible = "arm,vexpress-sysreg";
reg = <0x00000 0x1000>;
@@ -93,7 +93,7 @@
};
};
- v2m_sysctl: sysctl@01000 {
+ v2m_sysctl: sysctl@1000 {
compatible = "arm,sp810", "arm,primecell";
reg = <0x01000 0x1000>;
clocks = <&v2m_refclk32khz>, <&v2m_refclk1mhz>, <&smbclk>;
@@ -105,7 +105,7 @@
};
/* PCI-E I2C bus */
- v2m_i2c_pcie: i2c@02000 {
+ v2m_i2c_pcie: i2c@2000 {
compatible = "arm,versatile-i2c";
reg = <0x02000 0x1000>;
@@ -118,7 +118,7 @@
};
};
- aaci@04000 {
+ aaci@4000 {
compatible = "arm,pl041", "arm,primecell";
reg = <0x04000 0x1000>;
interrupts = <11>;
@@ -126,7 +126,7 @@
clock-names = "apb_pclk";
};
- mmci@05000 {
+ mmci@5000 {
compatible = "arm,pl180", "arm,primecell";
reg = <0x05000 0x1000>;
interrupts = <9 10>;
@@ -138,7 +138,7 @@
clock-names = "mclk", "apb_pclk";
};
- kmi@06000 {
+ kmi@6000 {
compatible = "arm,pl050", "arm,primecell";
reg = <0x06000 0x1000>;
interrupts = <12>;
@@ -146,7 +146,7 @@
clock-names = "KMIREFCLK", "apb_pclk";
};
- kmi@07000 {
+ kmi@7000 {
compatible = "arm,pl050", "arm,primecell";
reg = <0x07000 0x1000>;
interrupts = <13>;
@@ -154,7 +154,7 @@
clock-names = "KMIREFCLK", "apb_pclk";
};
- v2m_serial0: uart@09000 {
+ v2m_serial0: uart@9000 {
compatible = "arm,pl011", "arm,primecell";
reg = <0x09000 0x1000>;
interrupts = <5>;
@@ -162,7 +162,7 @@
clock-names = "uartclk", "apb_pclk";
};
- v2m_serial1: uart@0a000 {
+ v2m_serial1: uart@a000 {
compatible = "arm,pl011", "arm,primecell";
reg = <0x0a000 0x1000>;
interrupts = <6>;
@@ -170,7 +170,7 @@
clock-names = "uartclk", "apb_pclk";
};
- v2m_serial2: uart@0b000 {
+ v2m_serial2: uart@b000 {
compatible = "arm,pl011", "arm,primecell";
reg = <0x0b000 0x1000>;
interrupts = <7>;
@@ -178,7 +178,7 @@
clock-names = "uartclk", "apb_pclk";
};
- v2m_serial3: uart@0c000 {
+ v2m_serial3: uart@c000 {
compatible = "arm,pl011", "arm,primecell";
reg = <0x0c000 0x1000>;
interrupts = <8>;
@@ -186,7 +186,7 @@
clock-names = "uartclk", "apb_pclk";
};
- wdt@0f000 {
+ wdt@f000 {
compatible = "arm,sp805", "arm,primecell";
reg = <0x0f000 0x1000>;
interrupts = <0>;
diff --git a/arch/arm/boot/dts/vexpress-v2p-ca15-tc1.dts b/arch/arm/boot/dts/vexpress-v2p-ca15-tc1.dts
index 15f4fd3f4695..0c8de0ca73ee 100644
--- a/arch/arm/boot/dts/vexpress-v2p-ca15-tc1.dts
+++ b/arch/arm/boot/dts/vexpress-v2p-ca15-tc1.dts
@@ -220,7 +220,7 @@
};
};
- smb@08000000 {
+ smb@8000000 {
compatible = "simple-bus";
#address-cells = <2>;
diff --git a/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts b/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts
index bd107c5a0226..65ecf206388c 100644
--- a/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts
+++ b/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts
@@ -385,7 +385,7 @@
};
};
- etb@0,20010000 {
+ etb@20010000 {
compatible = "arm,coresight-etb10", "arm,primecell";
reg = <0 0x20010000 0 0x1000>;
@@ -399,7 +399,7 @@
};
};
- tpiu@0,20030000 {
+ tpiu@20030000 {
compatible = "arm,coresight-tpiu", "arm,primecell";
reg = <0 0x20030000 0 0x1000>;
@@ -449,7 +449,7 @@
};
};
- funnel@0,20040000 {
+ funnel@20040000 {
compatible = "arm,coresight-funnel", "arm,primecell";
reg = <0 0x20040000 0 0x1000>;
@@ -513,7 +513,7 @@
};
};
- ptm@0,2201c000 {
+ ptm@2201c000 {
compatible = "arm,coresight-etm3x", "arm,primecell";
reg = <0 0x2201c000 0 0x1000>;
@@ -527,7 +527,7 @@
};
};
- ptm@0,2201d000 {
+ ptm@2201d000 {
compatible = "arm,coresight-etm3x", "arm,primecell";
reg = <0 0x2201d000 0 0x1000>;
@@ -541,7 +541,7 @@
};
};
- etm@0,2203c000 {
+ etm@2203c000 {
compatible = "arm,coresight-etm3x", "arm,primecell";
reg = <0 0x2203c000 0 0x1000>;
@@ -555,7 +555,7 @@
};
};
- etm@0,2203d000 {
+ etm@2203d000 {
compatible = "arm,coresight-etm3x", "arm,primecell";
reg = <0 0x2203d000 0 0x1000>;
@@ -569,7 +569,7 @@
};
};
- etm@0,2203e000 {
+ etm@2203e000 {
compatible = "arm,coresight-etm3x", "arm,primecell";
reg = <0 0x2203e000 0 0x1000>;
@@ -583,7 +583,7 @@
};
};
- smb@08000000 {
+ smb@8000000 {
compatible = "simple-bus";
#address-cells = <2>;
diff --git a/arch/arm/boot/dts/vexpress-v2p-ca5s.dts b/arch/arm/boot/dts/vexpress-v2p-ca5s.dts
index 1acecaf4b13d..6e69b8e6c1a7 100644
--- a/arch/arm/boot/dts/vexpress-v2p-ca5s.dts
+++ b/arch/arm/boot/dts/vexpress-v2p-ca5s.dts
@@ -190,7 +190,7 @@
};
};
- smb@08000000 {
+ smb@8000000 {
compatible = "simple-bus";
#address-cells = <2>;
diff --git a/arch/arm/boot/dts/vexpress-v2p-ca9.dts b/arch/arm/boot/dts/vexpress-v2p-ca9.dts
index b608a03ee02f..c9305b58afc2 100644
--- a/arch/arm/boot/dts/vexpress-v2p-ca9.dts
+++ b/arch/arm/boot/dts/vexpress-v2p-ca9.dts
@@ -300,7 +300,7 @@
};
};
- smb@04000000 {
+ smb@4000000 {
compatible = "simple-bus";
#address-cells = <2>;
--
2.7.4
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply related [flat|nested] 4+ messages in thread
* [PATCH] ARM: dts: vexpress: fix few unit address format warnings
@ 2017-04-18 17:45 ` Sudeep Holla
0 siblings, 0 replies; 4+ messages in thread
From: Sudeep Holla @ 2017-04-18 17:45 UTC (permalink / raw)
To: linux-arm-kernel
This patch fixes the following set of warnings on vexpress platforms:
sysreg at 010000 simple-bus unit address format error, expected "10000"
sysctl at 020000 simple-bus unit address format error, expected "20000"
i2c at 030000 simple-bus unit address format error, expected "30000"
aaci at 040000 simple-bus unit address format error, expected "40000"
mmci at 050000 simple-bus unit address format error, expected "50000"
kmi at 060000 simple-bus unit address format error, expected "60000"
kmi at 070000 simple-bus unit address format error, expected "70000"
uart at 090000 simple-bus unit address format error, expected "90000"
uart at 0a0000 simple-bus unit address format error, expected "a0000"
uart at 0b0000 simple-bus unit address format error, expected "b0000"
uart at 0c0000 simple-bus unit address format error, expected "c0000"
wdt at 0f0000 simple-bus unit address format error, expected "f0000"
Cc: Liviu Dudau <liviu.dudau@arm.com>
Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
---
arch/arm/boot/dts/vexpress-v2m-rs1.dtsi | 24 ++++++++++++------------
arch/arm/boot/dts/vexpress-v2m.dtsi | 24 ++++++++++++------------
arch/arm/boot/dts/vexpress-v2p-ca15-tc1.dts | 2 +-
arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts | 18 +++++++++---------
arch/arm/boot/dts/vexpress-v2p-ca5s.dts | 2 +-
arch/arm/boot/dts/vexpress-v2p-ca9.dts | 2 +-
6 files changed, 36 insertions(+), 36 deletions(-)
Hi,
I observed few warning in linux-next due to the enhanced DTC checks
introduced with DTC upgrade in linux-next. The patch fixes few warnings
Regards,
Sudeep
diff --git a/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi b/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi
index 3086efacd00e..35714ff6f467 100644
--- a/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi
+++ b/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi
@@ -71,7 +71,7 @@
#size-cells = <1>;
ranges = <0 3 0 0x200000>;
- v2m_sysreg: sysreg at 010000 {
+ v2m_sysreg: sysreg at 10000 {
compatible = "arm,vexpress-sysreg";
reg = <0x010000 0x1000>;
@@ -94,7 +94,7 @@
};
};
- v2m_sysctl: sysctl at 020000 {
+ v2m_sysctl: sysctl at 20000 {
compatible = "arm,sp810", "arm,primecell";
reg = <0x020000 0x1000>;
clocks = <&v2m_refclk32khz>, <&v2m_refclk1mhz>, <&smbclk>;
@@ -106,7 +106,7 @@
};
/* PCI-E I2C bus */
- v2m_i2c_pcie: i2c at 030000 {
+ v2m_i2c_pcie: i2c at 30000 {
compatible = "arm,versatile-i2c";
reg = <0x030000 0x1000>;
@@ -119,7 +119,7 @@
};
};
- aaci at 040000 {
+ aaci at 40000 {
compatible = "arm,pl041", "arm,primecell";
reg = <0x040000 0x1000>;
interrupts = <11>;
@@ -127,7 +127,7 @@
clock-names = "apb_pclk";
};
- mmci at 050000 {
+ mmci at 50000 {
compatible = "arm,pl180", "arm,primecell";
reg = <0x050000 0x1000>;
interrupts = <9 10>;
@@ -139,7 +139,7 @@
clock-names = "mclk", "apb_pclk";
};
- kmi at 060000 {
+ kmi at 60000 {
compatible = "arm,pl050", "arm,primecell";
reg = <0x060000 0x1000>;
interrupts = <12>;
@@ -147,7 +147,7 @@
clock-names = "KMIREFCLK", "apb_pclk";
};
- kmi at 070000 {
+ kmi at 70000 {
compatible = "arm,pl050", "arm,primecell";
reg = <0x070000 0x1000>;
interrupts = <13>;
@@ -155,7 +155,7 @@
clock-names = "KMIREFCLK", "apb_pclk";
};
- v2m_serial0: uart at 090000 {
+ v2m_serial0: uart at 90000 {
compatible = "arm,pl011", "arm,primecell";
reg = <0x090000 0x1000>;
interrupts = <5>;
@@ -163,7 +163,7 @@
clock-names = "uartclk", "apb_pclk";
};
- v2m_serial1: uart at 0a0000 {
+ v2m_serial1: uart at a0000 {
compatible = "arm,pl011", "arm,primecell";
reg = <0x0a0000 0x1000>;
interrupts = <6>;
@@ -171,7 +171,7 @@
clock-names = "uartclk", "apb_pclk";
};
- v2m_serial2: uart at 0b0000 {
+ v2m_serial2: uart at b0000 {
compatible = "arm,pl011", "arm,primecell";
reg = <0x0b0000 0x1000>;
interrupts = <7>;
@@ -179,7 +179,7 @@
clock-names = "uartclk", "apb_pclk";
};
- v2m_serial3: uart at 0c0000 {
+ v2m_serial3: uart at c0000 {
compatible = "arm,pl011", "arm,primecell";
reg = <0x0c0000 0x1000>;
interrupts = <8>;
@@ -187,7 +187,7 @@
clock-names = "uartclk", "apb_pclk";
};
- wdt at 0f0000 {
+ wdt at f0000 {
compatible = "arm,sp805", "arm,primecell";
reg = <0x0f0000 0x1000>;
interrupts = <0>;
diff --git a/arch/arm/boot/dts/vexpress-v2m.dtsi b/arch/arm/boot/dts/vexpress-v2m.dtsi
index c6393d3f1719..1b6f6393be93 100644
--- a/arch/arm/boot/dts/vexpress-v2m.dtsi
+++ b/arch/arm/boot/dts/vexpress-v2m.dtsi
@@ -70,7 +70,7 @@
#size-cells = <1>;
ranges = <0 7 0 0x20000>;
- v2m_sysreg: sysreg at 00000 {
+ v2m_sysreg: sysreg at 0 {
compatible = "arm,vexpress-sysreg";
reg = <0x00000 0x1000>;
@@ -93,7 +93,7 @@
};
};
- v2m_sysctl: sysctl at 01000 {
+ v2m_sysctl: sysctl at 1000 {
compatible = "arm,sp810", "arm,primecell";
reg = <0x01000 0x1000>;
clocks = <&v2m_refclk32khz>, <&v2m_refclk1mhz>, <&smbclk>;
@@ -105,7 +105,7 @@
};
/* PCI-E I2C bus */
- v2m_i2c_pcie: i2c at 02000 {
+ v2m_i2c_pcie: i2c at 2000 {
compatible = "arm,versatile-i2c";
reg = <0x02000 0x1000>;
@@ -118,7 +118,7 @@
};
};
- aaci at 04000 {
+ aaci at 4000 {
compatible = "arm,pl041", "arm,primecell";
reg = <0x04000 0x1000>;
interrupts = <11>;
@@ -126,7 +126,7 @@
clock-names = "apb_pclk";
};
- mmci at 05000 {
+ mmci at 5000 {
compatible = "arm,pl180", "arm,primecell";
reg = <0x05000 0x1000>;
interrupts = <9 10>;
@@ -138,7 +138,7 @@
clock-names = "mclk", "apb_pclk";
};
- kmi at 06000 {
+ kmi at 6000 {
compatible = "arm,pl050", "arm,primecell";
reg = <0x06000 0x1000>;
interrupts = <12>;
@@ -146,7 +146,7 @@
clock-names = "KMIREFCLK", "apb_pclk";
};
- kmi at 07000 {
+ kmi at 7000 {
compatible = "arm,pl050", "arm,primecell";
reg = <0x07000 0x1000>;
interrupts = <13>;
@@ -154,7 +154,7 @@
clock-names = "KMIREFCLK", "apb_pclk";
};
- v2m_serial0: uart at 09000 {
+ v2m_serial0: uart at 9000 {
compatible = "arm,pl011", "arm,primecell";
reg = <0x09000 0x1000>;
interrupts = <5>;
@@ -162,7 +162,7 @@
clock-names = "uartclk", "apb_pclk";
};
- v2m_serial1: uart at 0a000 {
+ v2m_serial1: uart at a000 {
compatible = "arm,pl011", "arm,primecell";
reg = <0x0a000 0x1000>;
interrupts = <6>;
@@ -170,7 +170,7 @@
clock-names = "uartclk", "apb_pclk";
};
- v2m_serial2: uart at 0b000 {
+ v2m_serial2: uart at b000 {
compatible = "arm,pl011", "arm,primecell";
reg = <0x0b000 0x1000>;
interrupts = <7>;
@@ -178,7 +178,7 @@
clock-names = "uartclk", "apb_pclk";
};
- v2m_serial3: uart at 0c000 {
+ v2m_serial3: uart at c000 {
compatible = "arm,pl011", "arm,primecell";
reg = <0x0c000 0x1000>;
interrupts = <8>;
@@ -186,7 +186,7 @@
clock-names = "uartclk", "apb_pclk";
};
- wdt at 0f000 {
+ wdt at f000 {
compatible = "arm,sp805", "arm,primecell";
reg = <0x0f000 0x1000>;
interrupts = <0>;
diff --git a/arch/arm/boot/dts/vexpress-v2p-ca15-tc1.dts b/arch/arm/boot/dts/vexpress-v2p-ca15-tc1.dts
index 15f4fd3f4695..0c8de0ca73ee 100644
--- a/arch/arm/boot/dts/vexpress-v2p-ca15-tc1.dts
+++ b/arch/arm/boot/dts/vexpress-v2p-ca15-tc1.dts
@@ -220,7 +220,7 @@
};
};
- smb at 08000000 {
+ smb at 8000000 {
compatible = "simple-bus";
#address-cells = <2>;
diff --git a/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts b/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts
index bd107c5a0226..65ecf206388c 100644
--- a/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts
+++ b/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts
@@ -385,7 +385,7 @@
};
};
- etb at 0,20010000 {
+ etb at 20010000 {
compatible = "arm,coresight-etb10", "arm,primecell";
reg = <0 0x20010000 0 0x1000>;
@@ -399,7 +399,7 @@
};
};
- tpiu at 0,20030000 {
+ tpiu at 20030000 {
compatible = "arm,coresight-tpiu", "arm,primecell";
reg = <0 0x20030000 0 0x1000>;
@@ -449,7 +449,7 @@
};
};
- funnel at 0,20040000 {
+ funnel at 20040000 {
compatible = "arm,coresight-funnel", "arm,primecell";
reg = <0 0x20040000 0 0x1000>;
@@ -513,7 +513,7 @@
};
};
- ptm at 0,2201c000 {
+ ptm at 2201c000 {
compatible = "arm,coresight-etm3x", "arm,primecell";
reg = <0 0x2201c000 0 0x1000>;
@@ -527,7 +527,7 @@
};
};
- ptm at 0,2201d000 {
+ ptm at 2201d000 {
compatible = "arm,coresight-etm3x", "arm,primecell";
reg = <0 0x2201d000 0 0x1000>;
@@ -541,7 +541,7 @@
};
};
- etm at 0,2203c000 {
+ etm at 2203c000 {
compatible = "arm,coresight-etm3x", "arm,primecell";
reg = <0 0x2203c000 0 0x1000>;
@@ -555,7 +555,7 @@
};
};
- etm at 0,2203d000 {
+ etm at 2203d000 {
compatible = "arm,coresight-etm3x", "arm,primecell";
reg = <0 0x2203d000 0 0x1000>;
@@ -569,7 +569,7 @@
};
};
- etm at 0,2203e000 {
+ etm at 2203e000 {
compatible = "arm,coresight-etm3x", "arm,primecell";
reg = <0 0x2203e000 0 0x1000>;
@@ -583,7 +583,7 @@
};
};
- smb at 08000000 {
+ smb at 8000000 {
compatible = "simple-bus";
#address-cells = <2>;
diff --git a/arch/arm/boot/dts/vexpress-v2p-ca5s.dts b/arch/arm/boot/dts/vexpress-v2p-ca5s.dts
index 1acecaf4b13d..6e69b8e6c1a7 100644
--- a/arch/arm/boot/dts/vexpress-v2p-ca5s.dts
+++ b/arch/arm/boot/dts/vexpress-v2p-ca5s.dts
@@ -190,7 +190,7 @@
};
};
- smb at 08000000 {
+ smb at 8000000 {
compatible = "simple-bus";
#address-cells = <2>;
diff --git a/arch/arm/boot/dts/vexpress-v2p-ca9.dts b/arch/arm/boot/dts/vexpress-v2p-ca9.dts
index b608a03ee02f..c9305b58afc2 100644
--- a/arch/arm/boot/dts/vexpress-v2p-ca9.dts
+++ b/arch/arm/boot/dts/vexpress-v2p-ca9.dts
@@ -300,7 +300,7 @@
};
};
- smb at 04000000 {
+ smb at 4000000 {
compatible = "simple-bus";
#address-cells = <2>;
--
2.7.4
^ permalink raw reply related [flat|nested] 4+ messages in thread
* Re: [PATCH] ARM: dts: vexpress: fix few unit address format warnings
2017-04-18 17:45 ` Sudeep Holla
@ 2017-04-19 10:07 ` Liviu Dudau
-1 siblings, 0 replies; 4+ messages in thread
From: Liviu Dudau @ 2017-04-19 10:07 UTC (permalink / raw)
To: Sudeep Holla
Cc: linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
devicetree-u79uwXL29TY76Z2rM5mHXA, Lorenzo Pieralisi
On Tue, Apr 18, 2017 at 06:45:07PM +0100, Sudeep Holla wrote:
> This patch fixes the following set of warnings on vexpress platforms:
>
> sysreg@010000 simple-bus unit address format error, expected "10000"
> sysctl@020000 simple-bus unit address format error, expected "20000"
> i2c@030000 simple-bus unit address format error, expected "30000"
> aaci@040000 simple-bus unit address format error, expected "40000"
> mmci@050000 simple-bus unit address format error, expected "50000"
> kmi@060000 simple-bus unit address format error, expected "60000"
> kmi@070000 simple-bus unit address format error, expected "70000"
> uart@090000 simple-bus unit address format error, expected "90000"
> uart@0a0000 simple-bus unit address format error, expected "a0000"
> uart@0b0000 simple-bus unit address format error, expected "b0000"
> uart@0c0000 simple-bus unit address format error, expected "c0000"
> wdt@0f0000 simple-bus unit address format error, expected "f0000"
>
> Cc: Liviu Dudau <liviu.dudau-5wv7dgnIgG8@public.gmane.org>
Acked-by: Liviu Dudau <liviu.dudau-5wv7dgnIgG8@public.gmane.org>
> Cc: Lorenzo Pieralisi <lorenzo.pieralisi-5wv7dgnIgG8@public.gmane.org>
> Signed-off-by: Sudeep Holla <sudeep.holla-5wv7dgnIgG8@public.gmane.org>
> ---
> arch/arm/boot/dts/vexpress-v2m-rs1.dtsi | 24 ++++++++++++------------
> arch/arm/boot/dts/vexpress-v2m.dtsi | 24 ++++++++++++------------
> arch/arm/boot/dts/vexpress-v2p-ca15-tc1.dts | 2 +-
> arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts | 18 +++++++++---------
> arch/arm/boot/dts/vexpress-v2p-ca5s.dts | 2 +-
> arch/arm/boot/dts/vexpress-v2p-ca9.dts | 2 +-
> 6 files changed, 36 insertions(+), 36 deletions(-)
>
> Hi,
>
> I observed few warning in linux-next due to the enhanced DTC checks
> introduced with DTC upgrade in linux-next. The patch fixes few warnings
All changes look sensible to me in order to fix the warnings, but I feel like
letting out a minor rant from me: the fact that DTC now complains about leading
zeros in what is usually a numeric field is silly. I find it easier to parse numbers
that have the same width. Also, now the reg property doesn't match the @<number>
part if you grep for it.
Best regards,
Liviu
>
> Regards,
> Sudeep
>
> diff --git a/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi b/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi
> index 3086efacd00e..35714ff6f467 100644
> --- a/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi
> +++ b/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi
> @@ -71,7 +71,7 @@
> #size-cells = <1>;
> ranges = <0 3 0 0x200000>;
>
> - v2m_sysreg: sysreg@010000 {
> + v2m_sysreg: sysreg@10000 {
> compatible = "arm,vexpress-sysreg";
> reg = <0x010000 0x1000>;
>
> @@ -94,7 +94,7 @@
> };
> };
>
> - v2m_sysctl: sysctl@020000 {
> + v2m_sysctl: sysctl@20000 {
> compatible = "arm,sp810", "arm,primecell";
> reg = <0x020000 0x1000>;
> clocks = <&v2m_refclk32khz>, <&v2m_refclk1mhz>, <&smbclk>;
> @@ -106,7 +106,7 @@
> };
>
> /* PCI-E I2C bus */
> - v2m_i2c_pcie: i2c@030000 {
> + v2m_i2c_pcie: i2c@30000 {
> compatible = "arm,versatile-i2c";
> reg = <0x030000 0x1000>;
>
> @@ -119,7 +119,7 @@
> };
> };
>
> - aaci@040000 {
> + aaci@40000 {
> compatible = "arm,pl041", "arm,primecell";
> reg = <0x040000 0x1000>;
> interrupts = <11>;
> @@ -127,7 +127,7 @@
> clock-names = "apb_pclk";
> };
>
> - mmci@050000 {
> + mmci@50000 {
> compatible = "arm,pl180", "arm,primecell";
> reg = <0x050000 0x1000>;
> interrupts = <9 10>;
> @@ -139,7 +139,7 @@
> clock-names = "mclk", "apb_pclk";
> };
>
> - kmi@060000 {
> + kmi@60000 {
> compatible = "arm,pl050", "arm,primecell";
> reg = <0x060000 0x1000>;
> interrupts = <12>;
> @@ -147,7 +147,7 @@
> clock-names = "KMIREFCLK", "apb_pclk";
> };
>
> - kmi@070000 {
> + kmi@70000 {
> compatible = "arm,pl050", "arm,primecell";
> reg = <0x070000 0x1000>;
> interrupts = <13>;
> @@ -155,7 +155,7 @@
> clock-names = "KMIREFCLK", "apb_pclk";
> };
>
> - v2m_serial0: uart@090000 {
> + v2m_serial0: uart@90000 {
> compatible = "arm,pl011", "arm,primecell";
> reg = <0x090000 0x1000>;
> interrupts = <5>;
> @@ -163,7 +163,7 @@
> clock-names = "uartclk", "apb_pclk";
> };
>
> - v2m_serial1: uart@0a0000 {
> + v2m_serial1: uart@a0000 {
> compatible = "arm,pl011", "arm,primecell";
> reg = <0x0a0000 0x1000>;
> interrupts = <6>;
> @@ -171,7 +171,7 @@
> clock-names = "uartclk", "apb_pclk";
> };
>
> - v2m_serial2: uart@0b0000 {
> + v2m_serial2: uart@b0000 {
> compatible = "arm,pl011", "arm,primecell";
> reg = <0x0b0000 0x1000>;
> interrupts = <7>;
> @@ -179,7 +179,7 @@
> clock-names = "uartclk", "apb_pclk";
> };
>
> - v2m_serial3: uart@0c0000 {
> + v2m_serial3: uart@c0000 {
> compatible = "arm,pl011", "arm,primecell";
> reg = <0x0c0000 0x1000>;
> interrupts = <8>;
> @@ -187,7 +187,7 @@
> clock-names = "uartclk", "apb_pclk";
> };
>
> - wdt@0f0000 {
> + wdt@f0000 {
> compatible = "arm,sp805", "arm,primecell";
> reg = <0x0f0000 0x1000>;
> interrupts = <0>;
> diff --git a/arch/arm/boot/dts/vexpress-v2m.dtsi b/arch/arm/boot/dts/vexpress-v2m.dtsi
> index c6393d3f1719..1b6f6393be93 100644
> --- a/arch/arm/boot/dts/vexpress-v2m.dtsi
> +++ b/arch/arm/boot/dts/vexpress-v2m.dtsi
> @@ -70,7 +70,7 @@
> #size-cells = <1>;
> ranges = <0 7 0 0x20000>;
>
> - v2m_sysreg: sysreg@00000 {
> + v2m_sysreg: sysreg@0 {
> compatible = "arm,vexpress-sysreg";
> reg = <0x00000 0x1000>;
>
> @@ -93,7 +93,7 @@
> };
> };
>
> - v2m_sysctl: sysctl@01000 {
> + v2m_sysctl: sysctl@1000 {
> compatible = "arm,sp810", "arm,primecell";
> reg = <0x01000 0x1000>;
> clocks = <&v2m_refclk32khz>, <&v2m_refclk1mhz>, <&smbclk>;
> @@ -105,7 +105,7 @@
> };
>
> /* PCI-E I2C bus */
> - v2m_i2c_pcie: i2c@02000 {
> + v2m_i2c_pcie: i2c@2000 {
> compatible = "arm,versatile-i2c";
> reg = <0x02000 0x1000>;
>
> @@ -118,7 +118,7 @@
> };
> };
>
> - aaci@04000 {
> + aaci@4000 {
> compatible = "arm,pl041", "arm,primecell";
> reg = <0x04000 0x1000>;
> interrupts = <11>;
> @@ -126,7 +126,7 @@
> clock-names = "apb_pclk";
> };
>
> - mmci@05000 {
> + mmci@5000 {
> compatible = "arm,pl180", "arm,primecell";
> reg = <0x05000 0x1000>;
> interrupts = <9 10>;
> @@ -138,7 +138,7 @@
> clock-names = "mclk", "apb_pclk";
> };
>
> - kmi@06000 {
> + kmi@6000 {
> compatible = "arm,pl050", "arm,primecell";
> reg = <0x06000 0x1000>;
> interrupts = <12>;
> @@ -146,7 +146,7 @@
> clock-names = "KMIREFCLK", "apb_pclk";
> };
>
> - kmi@07000 {
> + kmi@7000 {
> compatible = "arm,pl050", "arm,primecell";
> reg = <0x07000 0x1000>;
> interrupts = <13>;
> @@ -154,7 +154,7 @@
> clock-names = "KMIREFCLK", "apb_pclk";
> };
>
> - v2m_serial0: uart@09000 {
> + v2m_serial0: uart@9000 {
> compatible = "arm,pl011", "arm,primecell";
> reg = <0x09000 0x1000>;
> interrupts = <5>;
> @@ -162,7 +162,7 @@
> clock-names = "uartclk", "apb_pclk";
> };
>
> - v2m_serial1: uart@0a000 {
> + v2m_serial1: uart@a000 {
> compatible = "arm,pl011", "arm,primecell";
> reg = <0x0a000 0x1000>;
> interrupts = <6>;
> @@ -170,7 +170,7 @@
> clock-names = "uartclk", "apb_pclk";
> };
>
> - v2m_serial2: uart@0b000 {
> + v2m_serial2: uart@b000 {
> compatible = "arm,pl011", "arm,primecell";
> reg = <0x0b000 0x1000>;
> interrupts = <7>;
> @@ -178,7 +178,7 @@
> clock-names = "uartclk", "apb_pclk";
> };
>
> - v2m_serial3: uart@0c000 {
> + v2m_serial3: uart@c000 {
> compatible = "arm,pl011", "arm,primecell";
> reg = <0x0c000 0x1000>;
> interrupts = <8>;
> @@ -186,7 +186,7 @@
> clock-names = "uartclk", "apb_pclk";
> };
>
> - wdt@0f000 {
> + wdt@f000 {
> compatible = "arm,sp805", "arm,primecell";
> reg = <0x0f000 0x1000>;
> interrupts = <0>;
> diff --git a/arch/arm/boot/dts/vexpress-v2p-ca15-tc1.dts b/arch/arm/boot/dts/vexpress-v2p-ca15-tc1.dts
> index 15f4fd3f4695..0c8de0ca73ee 100644
> --- a/arch/arm/boot/dts/vexpress-v2p-ca15-tc1.dts
> +++ b/arch/arm/boot/dts/vexpress-v2p-ca15-tc1.dts
> @@ -220,7 +220,7 @@
> };
> };
>
> - smb@08000000 {
> + smb@8000000 {
> compatible = "simple-bus";
>
> #address-cells = <2>;
> diff --git a/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts b/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts
> index bd107c5a0226..65ecf206388c 100644
> --- a/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts
> +++ b/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts
> @@ -385,7 +385,7 @@
> };
> };
>
> - etb@0,20010000 {
> + etb@20010000 {
> compatible = "arm,coresight-etb10", "arm,primecell";
> reg = <0 0x20010000 0 0x1000>;
>
> @@ -399,7 +399,7 @@
> };
> };
>
> - tpiu@0,20030000 {
> + tpiu@20030000 {
> compatible = "arm,coresight-tpiu", "arm,primecell";
> reg = <0 0x20030000 0 0x1000>;
>
> @@ -449,7 +449,7 @@
> };
> };
>
> - funnel@0,20040000 {
> + funnel@20040000 {
> compatible = "arm,coresight-funnel", "arm,primecell";
> reg = <0 0x20040000 0 0x1000>;
>
> @@ -513,7 +513,7 @@
> };
> };
>
> - ptm@0,2201c000 {
> + ptm@2201c000 {
> compatible = "arm,coresight-etm3x", "arm,primecell";
> reg = <0 0x2201c000 0 0x1000>;
>
> @@ -527,7 +527,7 @@
> };
> };
>
> - ptm@0,2201d000 {
> + ptm@2201d000 {
> compatible = "arm,coresight-etm3x", "arm,primecell";
> reg = <0 0x2201d000 0 0x1000>;
>
> @@ -541,7 +541,7 @@
> };
> };
>
> - etm@0,2203c000 {
> + etm@2203c000 {
> compatible = "arm,coresight-etm3x", "arm,primecell";
> reg = <0 0x2203c000 0 0x1000>;
>
> @@ -555,7 +555,7 @@
> };
> };
>
> - etm@0,2203d000 {
> + etm@2203d000 {
> compatible = "arm,coresight-etm3x", "arm,primecell";
> reg = <0 0x2203d000 0 0x1000>;
>
> @@ -569,7 +569,7 @@
> };
> };
>
> - etm@0,2203e000 {
> + etm@2203e000 {
> compatible = "arm,coresight-etm3x", "arm,primecell";
> reg = <0 0x2203e000 0 0x1000>;
>
> @@ -583,7 +583,7 @@
> };
> };
>
> - smb@08000000 {
> + smb@8000000 {
> compatible = "simple-bus";
>
> #address-cells = <2>;
> diff --git a/arch/arm/boot/dts/vexpress-v2p-ca5s.dts b/arch/arm/boot/dts/vexpress-v2p-ca5s.dts
> index 1acecaf4b13d..6e69b8e6c1a7 100644
> --- a/arch/arm/boot/dts/vexpress-v2p-ca5s.dts
> +++ b/arch/arm/boot/dts/vexpress-v2p-ca5s.dts
> @@ -190,7 +190,7 @@
> };
> };
>
> - smb@08000000 {
> + smb@8000000 {
> compatible = "simple-bus";
>
> #address-cells = <2>;
> diff --git a/arch/arm/boot/dts/vexpress-v2p-ca9.dts b/arch/arm/boot/dts/vexpress-v2p-ca9.dts
> index b608a03ee02f..c9305b58afc2 100644
> --- a/arch/arm/boot/dts/vexpress-v2p-ca9.dts
> +++ b/arch/arm/boot/dts/vexpress-v2p-ca9.dts
> @@ -300,7 +300,7 @@
> };
> };
>
> - smb@04000000 {
> + smb@4000000 {
> compatible = "simple-bus";
>
> #address-cells = <2>;
> --
> 2.7.4
>
--
====================
| I would like to |
| fix the world, |
| but they're not |
| giving me the |
\ source code! /
---------------
¯\_(ツ)_/¯
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply [flat|nested] 4+ messages in thread
* [PATCH] ARM: dts: vexpress: fix few unit address format warnings
@ 2017-04-19 10:07 ` Liviu Dudau
0 siblings, 0 replies; 4+ messages in thread
From: Liviu Dudau @ 2017-04-19 10:07 UTC (permalink / raw)
To: linux-arm-kernel
On Tue, Apr 18, 2017 at 06:45:07PM +0100, Sudeep Holla wrote:
> This patch fixes the following set of warnings on vexpress platforms:
>
> sysreg at 010000 simple-bus unit address format error, expected "10000"
> sysctl at 020000 simple-bus unit address format error, expected "20000"
> i2c at 030000 simple-bus unit address format error, expected "30000"
> aaci at 040000 simple-bus unit address format error, expected "40000"
> mmci at 050000 simple-bus unit address format error, expected "50000"
> kmi at 060000 simple-bus unit address format error, expected "60000"
> kmi at 070000 simple-bus unit address format error, expected "70000"
> uart at 090000 simple-bus unit address format error, expected "90000"
> uart at 0a0000 simple-bus unit address format error, expected "a0000"
> uart at 0b0000 simple-bus unit address format error, expected "b0000"
> uart at 0c0000 simple-bus unit address format error, expected "c0000"
> wdt at 0f0000 simple-bus unit address format error, expected "f0000"
>
> Cc: Liviu Dudau <liviu.dudau@arm.com>
Acked-by: Liviu Dudau <liviu.dudau@arm.com>
> Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
> ---
> arch/arm/boot/dts/vexpress-v2m-rs1.dtsi | 24 ++++++++++++------------
> arch/arm/boot/dts/vexpress-v2m.dtsi | 24 ++++++++++++------------
> arch/arm/boot/dts/vexpress-v2p-ca15-tc1.dts | 2 +-
> arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts | 18 +++++++++---------
> arch/arm/boot/dts/vexpress-v2p-ca5s.dts | 2 +-
> arch/arm/boot/dts/vexpress-v2p-ca9.dts | 2 +-
> 6 files changed, 36 insertions(+), 36 deletions(-)
>
> Hi,
>
> I observed few warning in linux-next due to the enhanced DTC checks
> introduced with DTC upgrade in linux-next. The patch fixes few warnings
All changes look sensible to me in order to fix the warnings, but I feel like
letting out a minor rant from me: the fact that DTC now complains about leading
zeros in what is usually a numeric field is silly. I find it easier to parse numbers
that have the same width. Also, now the reg property doesn't match the @<number>
part if you grep for it.
Best regards,
Liviu
>
> Regards,
> Sudeep
>
> diff --git a/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi b/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi
> index 3086efacd00e..35714ff6f467 100644
> --- a/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi
> +++ b/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi
> @@ -71,7 +71,7 @@
> #size-cells = <1>;
> ranges = <0 3 0 0x200000>;
>
> - v2m_sysreg: sysreg at 010000 {
> + v2m_sysreg: sysreg at 10000 {
> compatible = "arm,vexpress-sysreg";
> reg = <0x010000 0x1000>;
>
> @@ -94,7 +94,7 @@
> };
> };
>
> - v2m_sysctl: sysctl at 020000 {
> + v2m_sysctl: sysctl at 20000 {
> compatible = "arm,sp810", "arm,primecell";
> reg = <0x020000 0x1000>;
> clocks = <&v2m_refclk32khz>, <&v2m_refclk1mhz>, <&smbclk>;
> @@ -106,7 +106,7 @@
> };
>
> /* PCI-E I2C bus */
> - v2m_i2c_pcie: i2c at 030000 {
> + v2m_i2c_pcie: i2c at 30000 {
> compatible = "arm,versatile-i2c";
> reg = <0x030000 0x1000>;
>
> @@ -119,7 +119,7 @@
> };
> };
>
> - aaci at 040000 {
> + aaci at 40000 {
> compatible = "arm,pl041", "arm,primecell";
> reg = <0x040000 0x1000>;
> interrupts = <11>;
> @@ -127,7 +127,7 @@
> clock-names = "apb_pclk";
> };
>
> - mmci at 050000 {
> + mmci at 50000 {
> compatible = "arm,pl180", "arm,primecell";
> reg = <0x050000 0x1000>;
> interrupts = <9 10>;
> @@ -139,7 +139,7 @@
> clock-names = "mclk", "apb_pclk";
> };
>
> - kmi at 060000 {
> + kmi at 60000 {
> compatible = "arm,pl050", "arm,primecell";
> reg = <0x060000 0x1000>;
> interrupts = <12>;
> @@ -147,7 +147,7 @@
> clock-names = "KMIREFCLK", "apb_pclk";
> };
>
> - kmi at 070000 {
> + kmi at 70000 {
> compatible = "arm,pl050", "arm,primecell";
> reg = <0x070000 0x1000>;
> interrupts = <13>;
> @@ -155,7 +155,7 @@
> clock-names = "KMIREFCLK", "apb_pclk";
> };
>
> - v2m_serial0: uart at 090000 {
> + v2m_serial0: uart at 90000 {
> compatible = "arm,pl011", "arm,primecell";
> reg = <0x090000 0x1000>;
> interrupts = <5>;
> @@ -163,7 +163,7 @@
> clock-names = "uartclk", "apb_pclk";
> };
>
> - v2m_serial1: uart at 0a0000 {
> + v2m_serial1: uart at a0000 {
> compatible = "arm,pl011", "arm,primecell";
> reg = <0x0a0000 0x1000>;
> interrupts = <6>;
> @@ -171,7 +171,7 @@
> clock-names = "uartclk", "apb_pclk";
> };
>
> - v2m_serial2: uart at 0b0000 {
> + v2m_serial2: uart at b0000 {
> compatible = "arm,pl011", "arm,primecell";
> reg = <0x0b0000 0x1000>;
> interrupts = <7>;
> @@ -179,7 +179,7 @@
> clock-names = "uartclk", "apb_pclk";
> };
>
> - v2m_serial3: uart at 0c0000 {
> + v2m_serial3: uart at c0000 {
> compatible = "arm,pl011", "arm,primecell";
> reg = <0x0c0000 0x1000>;
> interrupts = <8>;
> @@ -187,7 +187,7 @@
> clock-names = "uartclk", "apb_pclk";
> };
>
> - wdt at 0f0000 {
> + wdt at f0000 {
> compatible = "arm,sp805", "arm,primecell";
> reg = <0x0f0000 0x1000>;
> interrupts = <0>;
> diff --git a/arch/arm/boot/dts/vexpress-v2m.dtsi b/arch/arm/boot/dts/vexpress-v2m.dtsi
> index c6393d3f1719..1b6f6393be93 100644
> --- a/arch/arm/boot/dts/vexpress-v2m.dtsi
> +++ b/arch/arm/boot/dts/vexpress-v2m.dtsi
> @@ -70,7 +70,7 @@
> #size-cells = <1>;
> ranges = <0 7 0 0x20000>;
>
> - v2m_sysreg: sysreg at 00000 {
> + v2m_sysreg: sysreg at 0 {
> compatible = "arm,vexpress-sysreg";
> reg = <0x00000 0x1000>;
>
> @@ -93,7 +93,7 @@
> };
> };
>
> - v2m_sysctl: sysctl at 01000 {
> + v2m_sysctl: sysctl at 1000 {
> compatible = "arm,sp810", "arm,primecell";
> reg = <0x01000 0x1000>;
> clocks = <&v2m_refclk32khz>, <&v2m_refclk1mhz>, <&smbclk>;
> @@ -105,7 +105,7 @@
> };
>
> /* PCI-E I2C bus */
> - v2m_i2c_pcie: i2c at 02000 {
> + v2m_i2c_pcie: i2c at 2000 {
> compatible = "arm,versatile-i2c";
> reg = <0x02000 0x1000>;
>
> @@ -118,7 +118,7 @@
> };
> };
>
> - aaci at 04000 {
> + aaci at 4000 {
> compatible = "arm,pl041", "arm,primecell";
> reg = <0x04000 0x1000>;
> interrupts = <11>;
> @@ -126,7 +126,7 @@
> clock-names = "apb_pclk";
> };
>
> - mmci at 05000 {
> + mmci at 5000 {
> compatible = "arm,pl180", "arm,primecell";
> reg = <0x05000 0x1000>;
> interrupts = <9 10>;
> @@ -138,7 +138,7 @@
> clock-names = "mclk", "apb_pclk";
> };
>
> - kmi at 06000 {
> + kmi at 6000 {
> compatible = "arm,pl050", "arm,primecell";
> reg = <0x06000 0x1000>;
> interrupts = <12>;
> @@ -146,7 +146,7 @@
> clock-names = "KMIREFCLK", "apb_pclk";
> };
>
> - kmi at 07000 {
> + kmi at 7000 {
> compatible = "arm,pl050", "arm,primecell";
> reg = <0x07000 0x1000>;
> interrupts = <13>;
> @@ -154,7 +154,7 @@
> clock-names = "KMIREFCLK", "apb_pclk";
> };
>
> - v2m_serial0: uart at 09000 {
> + v2m_serial0: uart at 9000 {
> compatible = "arm,pl011", "arm,primecell";
> reg = <0x09000 0x1000>;
> interrupts = <5>;
> @@ -162,7 +162,7 @@
> clock-names = "uartclk", "apb_pclk";
> };
>
> - v2m_serial1: uart at 0a000 {
> + v2m_serial1: uart at a000 {
> compatible = "arm,pl011", "arm,primecell";
> reg = <0x0a000 0x1000>;
> interrupts = <6>;
> @@ -170,7 +170,7 @@
> clock-names = "uartclk", "apb_pclk";
> };
>
> - v2m_serial2: uart at 0b000 {
> + v2m_serial2: uart at b000 {
> compatible = "arm,pl011", "arm,primecell";
> reg = <0x0b000 0x1000>;
> interrupts = <7>;
> @@ -178,7 +178,7 @@
> clock-names = "uartclk", "apb_pclk";
> };
>
> - v2m_serial3: uart at 0c000 {
> + v2m_serial3: uart at c000 {
> compatible = "arm,pl011", "arm,primecell";
> reg = <0x0c000 0x1000>;
> interrupts = <8>;
> @@ -186,7 +186,7 @@
> clock-names = "uartclk", "apb_pclk";
> };
>
> - wdt at 0f000 {
> + wdt at f000 {
> compatible = "arm,sp805", "arm,primecell";
> reg = <0x0f000 0x1000>;
> interrupts = <0>;
> diff --git a/arch/arm/boot/dts/vexpress-v2p-ca15-tc1.dts b/arch/arm/boot/dts/vexpress-v2p-ca15-tc1.dts
> index 15f4fd3f4695..0c8de0ca73ee 100644
> --- a/arch/arm/boot/dts/vexpress-v2p-ca15-tc1.dts
> +++ b/arch/arm/boot/dts/vexpress-v2p-ca15-tc1.dts
> @@ -220,7 +220,7 @@
> };
> };
>
> - smb at 08000000 {
> + smb at 8000000 {
> compatible = "simple-bus";
>
> #address-cells = <2>;
> diff --git a/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts b/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts
> index bd107c5a0226..65ecf206388c 100644
> --- a/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts
> +++ b/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts
> @@ -385,7 +385,7 @@
> };
> };
>
> - etb at 0,20010000 {
> + etb at 20010000 {
> compatible = "arm,coresight-etb10", "arm,primecell";
> reg = <0 0x20010000 0 0x1000>;
>
> @@ -399,7 +399,7 @@
> };
> };
>
> - tpiu at 0,20030000 {
> + tpiu at 20030000 {
> compatible = "arm,coresight-tpiu", "arm,primecell";
> reg = <0 0x20030000 0 0x1000>;
>
> @@ -449,7 +449,7 @@
> };
> };
>
> - funnel at 0,20040000 {
> + funnel at 20040000 {
> compatible = "arm,coresight-funnel", "arm,primecell";
> reg = <0 0x20040000 0 0x1000>;
>
> @@ -513,7 +513,7 @@
> };
> };
>
> - ptm at 0,2201c000 {
> + ptm at 2201c000 {
> compatible = "arm,coresight-etm3x", "arm,primecell";
> reg = <0 0x2201c000 0 0x1000>;
>
> @@ -527,7 +527,7 @@
> };
> };
>
> - ptm at 0,2201d000 {
> + ptm at 2201d000 {
> compatible = "arm,coresight-etm3x", "arm,primecell";
> reg = <0 0x2201d000 0 0x1000>;
>
> @@ -541,7 +541,7 @@
> };
> };
>
> - etm at 0,2203c000 {
> + etm at 2203c000 {
> compatible = "arm,coresight-etm3x", "arm,primecell";
> reg = <0 0x2203c000 0 0x1000>;
>
> @@ -555,7 +555,7 @@
> };
> };
>
> - etm at 0,2203d000 {
> + etm at 2203d000 {
> compatible = "arm,coresight-etm3x", "arm,primecell";
> reg = <0 0x2203d000 0 0x1000>;
>
> @@ -569,7 +569,7 @@
> };
> };
>
> - etm at 0,2203e000 {
> + etm at 2203e000 {
> compatible = "arm,coresight-etm3x", "arm,primecell";
> reg = <0 0x2203e000 0 0x1000>;
>
> @@ -583,7 +583,7 @@
> };
> };
>
> - smb at 08000000 {
> + smb at 8000000 {
> compatible = "simple-bus";
>
> #address-cells = <2>;
> diff --git a/arch/arm/boot/dts/vexpress-v2p-ca5s.dts b/arch/arm/boot/dts/vexpress-v2p-ca5s.dts
> index 1acecaf4b13d..6e69b8e6c1a7 100644
> --- a/arch/arm/boot/dts/vexpress-v2p-ca5s.dts
> +++ b/arch/arm/boot/dts/vexpress-v2p-ca5s.dts
> @@ -190,7 +190,7 @@
> };
> };
>
> - smb at 08000000 {
> + smb at 8000000 {
> compatible = "simple-bus";
>
> #address-cells = <2>;
> diff --git a/arch/arm/boot/dts/vexpress-v2p-ca9.dts b/arch/arm/boot/dts/vexpress-v2p-ca9.dts
> index b608a03ee02f..c9305b58afc2 100644
> --- a/arch/arm/boot/dts/vexpress-v2p-ca9.dts
> +++ b/arch/arm/boot/dts/vexpress-v2p-ca9.dts
> @@ -300,7 +300,7 @@
> };
> };
>
> - smb at 04000000 {
> + smb at 4000000 {
> compatible = "simple-bus";
>
> #address-cells = <2>;
> --
> 2.7.4
>
--
====================
| I would like to |
| fix the world, |
| but they're not |
| giving me the |
\ source code! /
---------------
?\_(?)_/?
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2017-04-19 10:07 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2017-04-18 17:45 [PATCH] ARM: dts: vexpress: fix few unit address format warnings Sudeep Holla
2017-04-18 17:45 ` Sudeep Holla
[not found] ` <1492537507-7783-1-git-send-email-sudeep.holla-5wv7dgnIgG8@public.gmane.org>
2017-04-19 10:07 ` Liviu Dudau
2017-04-19 10:07 ` Liviu Dudau
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.