[PATCH v3 0/4] Avoid that __scsi_remove_device() hangs

[PATCH v3 0/4] Avoid that __scsi_remove_device() hangs

[Bart Van Assche]

__scsi_remove_device() hangs if it is waiting for the SYNCHRONIZE CACHE
command submitted by the sd driver to finish if the block layer queue is
stopped and does not get restarted. This patch series avoids that that
hang occurs.

Changes compared to v2:
- Moved the "stop_disk" assignment after the sdkp check in the sd driver.
- Added a completion function for asynchronous SYNCHRONIZE CACHE commands.
- Added "disk" and "done" arguments to scsi_execute_async().

Changes compared to v1:
- Reworked the approach of this patch series.

Bart Van Assche (4):
  Introduce scsi_start_queue()
  Introduce scsi_execute_async()
  sd: Make synchronize cache upon shutdown asynchronous
  Avoid that __scsi_remove_device() hangs

 drivers/scsi/scsi_lib.c    | 114 ++++++++++++++++++++++++++++++++++-----------
 drivers/scsi/scsi_priv.h   |   1 +
 drivers/scsi/scsi_sysfs.c  |   9 ++++
 drivers/scsi/sd.c          |  45 ++++++++++++++++--
 include/scsi/scsi_device.h |   5 ++
 5 files changed, 142 insertions(+), 32 deletions(-)

-- 
2.12.2

[PATCH v3 1/4] Introduce scsi_start_queue()

[Bart Van Assche]

This patch does not change any functionality.

Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com>
Cc: Israel Rukshin <israelr@mellanox.com>
Cc: Max Gurtovoy <maxg@mellanox.com>
Cc: Hannes Reinecke <hare@suse.de>
---
 drivers/scsi/scsi_lib.c  | 25 +++++++++++++++----------
 drivers/scsi/scsi_priv.h |  1 +
 2 files changed, 16 insertions(+), 10 deletions(-)

diff --git a/drivers/scsi/scsi_lib.c b/drivers/scsi/scsi_lib.c
index f41e6b84a1bd..4893f2908edf 100644
--- a/drivers/scsi/scsi_lib.c
+++ b/drivers/scsi/scsi_lib.c
@@ -2987,6 +2987,20 @@ scsi_internal_device_block(struct scsi_device *sdev, bool wait)
 }
 EXPORT_SYMBOL_GPL(scsi_internal_device_block);
  
+void scsi_start_queue(struct scsi_device *sdev)
+{
+	struct request_queue *q = sdev->request_queue;
+	unsigned long flags;
+
+	if (q->mq_ops) {
+		blk_mq_start_stopped_hw_queues(q, false);
+	} else {
+		spin_lock_irqsave(q->queue_lock, flags);
+		blk_start_queue(q);
+		spin_unlock_irqrestore(q->queue_lock, flags);
+	}
+}
+
 /**
  * scsi_internal_device_unblock - resume a device after a block request
  * @sdev:	device to resume
@@ -3007,9 +3021,6 @@ int
 scsi_internal_device_unblock(struct scsi_device *sdev,
 			     enum scsi_device_state new_state)
 {
-	struct request_queue *q = sdev->request_queue; 
-	unsigned long flags;
-
 	/*
 	 * Try to transition the scsi device to SDEV_RUNNING or one of the
 	 * offlined states and goose the device queue if successful.
@@ -3027,13 +3038,7 @@ scsi_internal_device_unblock(struct scsi_device *sdev,
 		 sdev->sdev_state != SDEV_OFFLINE)
 		return -EINVAL;
 
-	if (q->mq_ops) {
-		blk_mq_start_stopped_hw_queues(q, false);
-	} else {
-		spin_lock_irqsave(q->queue_lock, flags);
-		blk_start_queue(q);
-		spin_unlock_irqrestore(q->queue_lock, flags);
-	}
+	scsi_start_queue(sdev);
 
 	return 0;
 }
diff --git a/drivers/scsi/scsi_priv.h b/drivers/scsi/scsi_priv.h
index f11bd102d6d5..c7629e31a75b 100644
--- a/drivers/scsi/scsi_priv.h
+++ b/drivers/scsi/scsi_priv.h
@@ -89,6 +89,7 @@ extern void scsi_run_host_queues(struct Scsi_Host *shost);
 extern void scsi_requeue_run_queue(struct work_struct *work);
 extern struct request_queue *scsi_alloc_queue(struct scsi_device *sdev);
 extern struct request_queue *scsi_mq_alloc_queue(struct scsi_device *sdev);
+extern void scsi_start_queue(struct scsi_device *sdev);
 extern int scsi_mq_setup_tags(struct Scsi_Host *shost);
 extern void scsi_mq_destroy_tags(struct Scsi_Host *shost);
 extern int scsi_init_queue(void);
-- 
2.12.2

[PATCH v3 2/4] Introduce scsi_execute_async()

[Bart Van Assche]

Move the code for submitting a SCSI command from scsi_execute()
into scsi_build_rq(). Introduce scsi_execute_async(). This patch
does not change any functionality.

Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com>
Cc: Israel Rukshin <israelr@mellanox.com>
Cc: Max Gurtovoy <maxg@mellanox.com>
Cc: Hannes Reinecke <hare@suse.de>
---
 drivers/scsi/scsi_lib.c    | 89 +++++++++++++++++++++++++++++++++++++---------
 include/scsi/scsi_device.h |  5 +++
 2 files changed, 77 insertions(+), 17 deletions(-)

diff --git a/drivers/scsi/scsi_lib.c b/drivers/scsi/scsi_lib.c
index 4893f2908edf..dc87456b3f23 100644
--- a/drivers/scsi/scsi_lib.c
+++ b/drivers/scsi/scsi_lib.c
@@ -213,6 +213,73 @@ void scsi_queue_insert(struct scsi_cmnd *cmd, int reason)
 	__scsi_queue_insert(cmd, reason, 1);
 }
 
+static struct request *scsi_build_rq(const struct scsi_device *sdev,
+		const unsigned char *cmd, int data_direction, void *buffer,
+		unsigned bufflen, int timeout, int retries, u64 flags,
+		req_flags_t rq_flags)
+{
+	struct request *req;
+	struct scsi_request *rq;
+	int ret;
+
+	req = blk_get_request(sdev->request_queue,
+			data_direction == DMA_TO_DEVICE ?
+			REQ_OP_SCSI_OUT : REQ_OP_SCSI_IN, __GFP_RECLAIM);
+	if (IS_ERR(req))
+		return req;
+	rq = scsi_req(req);
+	scsi_req_init(req);
+
+	if (bufflen) {
+		ret = blk_rq_map_kern(sdev->request_queue, req,
+				      buffer, bufflen, __GFP_RECLAIM);
+		if (ret) {
+			blk_put_request(req);
+			return ERR_PTR(ret);
+		}
+	}
+
+	rq->cmd_len = COMMAND_SIZE(cmd[0]);
+	memcpy(rq->cmd, cmd, rq->cmd_len);
+	req->retries = retries;
+	req->timeout = timeout;
+	req->cmd_flags |= flags;
+	req->rq_flags |= rq_flags | RQF_QUIET | RQF_PREEMPT;
+
+	return req;
+}
+
+/**
+ * scsi_execute_async - insert a SCSI request
+ * @sdev:	scsi device
+ * @disk:       gendisk pointer that will be stored in the request structure
+ * @cmd:	scsi command
+ * @data_direction: data direction
+ * @buffer:	data buffer
+ * @bufflen:	length of buffer
+ * @timeout:	request timeout in seconds
+ * @retries:	number of times to retry request
+ * @flags:	flags for ->cmd_flags
+ * @rq_flags:	flags for ->rq_flags
+ * @done:       I/O completion function
+ */
+int scsi_execute_async(const struct scsi_device *sdev, struct gendisk *disk,
+		const unsigned char *cmd, int data_direction, void *buffer,
+		unsigned bufflen, int timeout, int retries, u64 flags,
+		req_flags_t rq_flags, rq_end_io_fn *done)
+{
+	struct request *req;
+
+	req = scsi_build_rq(sdev, cmd, data_direction, buffer, bufflen, timeout,
+			    retries, flags, rq_flags);
+	if (IS_ERR(req))
+		return PTR_ERR(req);
+	/* head injection *required* here otherwise quiesce won't work */
+	blk_execute_rq_nowait(req->q, disk, req, 1, done);
+
+	return 0;
+}
+EXPORT_SYMBOL(scsi_execute_async);
 
 /**
  * scsi_execute - insert request and wait for the result
@@ -242,24 +309,12 @@ int scsi_execute(struct scsi_device *sdev, const unsigned char *cmd,
 	struct scsi_request *rq;
 	int ret = DRIVER_ERROR << 24;
 
-	req = blk_get_request(sdev->request_queue,
-			data_direction == DMA_TO_DEVICE ?
-			REQ_OP_SCSI_OUT : REQ_OP_SCSI_IN, __GFP_RECLAIM);
+	req = scsi_build_rq(sdev, cmd, data_direction, buffer, bufflen,
+			    timeout, retries, flags, rq_flags);
 	if (IS_ERR(req))
-		return ret;
-	rq = scsi_req(req);
-	scsi_req_init(req);
+		return PTR_ERR(req);
 
-	if (bufflen &&	blk_rq_map_kern(sdev->request_queue, req,
-					buffer, bufflen, __GFP_RECLAIM))
-		goto out;
-
-	rq->cmd_len = COMMAND_SIZE(cmd[0]);
-	memcpy(rq->cmd, cmd, rq->cmd_len);
-	req->retries = retries;
-	req->timeout = timeout;
-	req->cmd_flags |= flags;
-	req->rq_flags |= rq_flags | RQF_QUIET | RQF_PREEMPT;
+	rq = scsi_req(req);
 
 	/*
 	 * head injection *required* here otherwise quiesce won't work
@@ -282,7 +337,7 @@ int scsi_execute(struct scsi_device *sdev, const unsigned char *cmd,
 	if (sshdr)
 		scsi_normalize_sense(rq->sense, rq->sense_len, sshdr);
 	ret = req->errors;
- out:
+
 	blk_put_request(req);
 
 	return ret;
diff --git a/include/scsi/scsi_device.h b/include/scsi/scsi_device.h
index 080c7ce9bae8..38c73ee0a929 100644
--- a/include/scsi/scsi_device.h
+++ b/include/scsi/scsi_device.h
@@ -408,6 +408,11 @@ extern const char *scsi_device_state_name(enum scsi_device_state);
 extern int scsi_is_sdev_device(const struct device *);
 extern int scsi_is_target_device(const struct device *);
 extern void scsi_sanitize_inquiry_string(unsigned char *s, int len);
+extern int scsi_execute_async(const struct scsi_device *sdev,
+		struct gendisk *disk, const unsigned char *cmd,
+		int data_direction, void *buffer, unsigned bufflen,
+		int timeout, int retries, u64 flags, req_flags_t rq_flags,
+			      rq_end_io_fn *done);
 extern int scsi_execute(struct scsi_device *sdev, const unsigned char *cmd,
 			int data_direction, void *buffer, unsigned bufflen,
 			unsigned char *sense, struct scsi_sense_hdr *sshdr,
-- 
2.12.2

[PATCH v3 3/4] sd: Make synchronize cache upon shutdown asynchronous

[Bart Van Assche]

This patch avoids that sd_shutdown() hangs on the SYNCHRONIZE CACHE
command if the block layer queue has been stopped by
scsi_target_block().

Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com>
Cc: Israel Rukshin <israelr@mellanox.com>
Cc: Max Gurtovoy <maxg@mellanox.com>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Benjamin Block <bblock@linux.vnet.ibm.com>
---
 drivers/scsi/sd.c | 45 ++++++++++++++++++++++++++++++++++++++++-----
 1 file changed, 40 insertions(+), 5 deletions(-)

diff --git a/drivers/scsi/sd.c b/drivers/scsi/sd.c
index fe0f7997074e..deff564fe649 100644
--- a/drivers/scsi/sd.c
+++ b/drivers/scsi/sd.c
@@ -1489,6 +1489,33 @@ static unsigned int sd_check_events(struct gendisk *disk, unsigned int clearing)
 	return retval;
 }
 
+static void sd_sync_cache_done(struct request *rq, int e)
+{
+	struct scsi_disk *sdkp = scsi_disk(rq->rq_disk);
+
+	sd_printk(KERN_DEBUG, sdkp, "%s\n", __func__);
+
+	blk_put_request(rq);
+}
+
+/*
+ * Issue a SYNCHRONIZE CACHE command asynchronously. Since blk_cleanup_queue()
+ * waits for all commands to finish, __scsi_remove_device() will wait for the
+ * SYNCHRONIZE CACHE command to finish.
+ */
+static int sd_sync_cache_async(struct scsi_disk *sdkp)
+{
+	const struct scsi_device *sdp = sdkp->device;
+	const int timeout = sdp->request_queue->rq_timeout *
+			    SD_FLUSH_TIMEOUT_MULTIPLIER;
+	const unsigned char cmd[10] = { SYNCHRONIZE_CACHE };
+
+	sd_printk(KERN_DEBUG, sdkp, "%s\n", __func__);
+	return scsi_execute_async(sdp, sdkp->disk, cmd, DMA_NONE, NULL, 0,
+				  timeout, SD_MAX_RETRIES, 0, 0,
+				  sd_sync_cache_done);
+}
+
 static int sd_sync_cache(struct scsi_disk *sdkp)
 {
 	int retries, res;
@@ -3349,13 +3376,15 @@ static int sd_start_stop_device(struct scsi_disk *sdkp, int start)
 }
 
 /*
- * Send a SYNCHRONIZE CACHE instruction down to the device through
- * the normal SCSI command structure.  Wait for the command to
- * complete.
+ * Send a SYNCHRONIZE CACHE instruction down to the device through the normal
+ * SCSI command structure. When stopping the disk, wait for the command to
+ * complete. When not stopping the disk, the blk_cleanup_queue() call in
+ * __scsi_remove_device() will wait for this command to complete.
  */
 static void sd_shutdown(struct device *dev)
 {
 	struct scsi_disk *sdkp = dev_get_drvdata(dev);
+	bool stop_disk;
 
 	if (!sdkp)
 		return;         /* this can happen */
@@ -3363,12 +3392,18 @@ static void sd_shutdown(struct device *dev)
 	if (pm_runtime_suspended(dev))
 		return;
 
+	stop_disk = system_state != SYSTEM_RESTART &&
+		sdkp->device->manage_start_stop;
+
 	if (sdkp->WCE && sdkp->media_present) {
 		sd_printk(KERN_NOTICE, sdkp, "Synchronizing SCSI cache\n");
-		sd_sync_cache(sdkp);
+		if (stop_disk)
+			sd_sync_cache(sdkp);
+		else
+			sd_sync_cache_async(sdkp);
 	}
 
-	if (system_state != SYSTEM_RESTART && sdkp->device->manage_start_stop) {
+	if (stop_disk) {
 		sd_printk(KERN_NOTICE, sdkp, "Stopping disk\n");
 		sd_start_stop_device(sdkp, 0);
 	}
-- 
2.12.2

[PATCH v3 4/4] Avoid that __scsi_remove_device() hangs

[Bart Van Assche]

Since scsi_target_unblock() uses starget_for_each_device(), since
starget_for_each_device() uses scsi_device_get(), since
scsi_device_get() fails after unloading of the LLD kernel module
has been started scsi_target_unblock() may skip devices that were
affected by scsi_target_block(). Ensure that __scsi_remove_device()
does not hang for blocked SCSI devices. This patch avoids that
unloading the ib_srp kernel module can trigger the following hang:

Call Trace:
 schedule+0x35/0x80
 schedule_timeout+0x237/0x2d0
 io_schedule_timeout+0xa6/0x110
 wait_for_completion_io+0xa3/0x110
 blk_execute_rq+0xdf/0x120
 scsi_execute+0xce/0x150 [scsi_mod]
 scsi_execute_req_flags+0x8f/0xf0 [scsi_mod]
 sd_sync_cache+0xa9/0x190 [sd_mod]
 sd_shutdown+0x6a/0x100 [sd_mod]
 sd_remove+0x64/0xc0 [sd_mod]
 __device_release_driver+0x8d/0x120
 device_release_driver+0x1e/0x30
 bus_remove_device+0xf9/0x170
 device_del+0x127/0x240
 __scsi_remove_device+0xc1/0xd0 [scsi_mod]
 scsi_forget_host+0x57/0x60 [scsi_mod]
 scsi_remove_host+0x72/0x110 [scsi_mod]
 srp_remove_work+0x8b/0x200 [ib_srp]

Reported-by: Israel Rukshin <israelr@mellanox.com>
Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com>
Cc: Max Gurtovoy <maxg@mellanox.com>
Cc: Hannes Reinecke <hare@suse.de>
---
 drivers/scsi/scsi_sysfs.c | 9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/drivers/scsi/scsi_sysfs.c b/drivers/scsi/scsi_sysfs.c
index 82dfe07b1d47..e090c35ba6ee 100644
--- a/drivers/scsi/scsi_sysfs.c
+++ b/drivers/scsi/scsi_sysfs.c
@@ -1299,6 +1299,15 @@ void __scsi_remove_device(struct scsi_device *sdev)
 	 * device.
 	 */
 	scsi_device_set_state(sdev, SDEV_DEL);
+	/*
+	 * Since scsi_target_unblock() is a no-op after unloading of the SCSI
+	 * LLD has started, explicitly restart the queue. Do this after the
+	 * device state has been changed into SDEV_DEL because
+	 * scsi_prep_state_check() returns BLKPREP_KILL for the SDEV_DEL state
+	 * Do this before calling blk_cleanup_queue() to avoid that that
+	 * function encounters a stopped queue.
+	 */
+	scsi_start_queue(sdev);
 	blk_cleanup_queue(sdev->request_queue);
 	cancel_work_sync(&sdev->requeue_work);
 
-- 
2.12.2

Re: [PATCH v3 0/4] Avoid that __scsi_remove_device() hangs

[Israel Rukshin]

On 4/17/2017 8:34 PM, Bart Van Assche wrote:
> __scsi_remove_device() hangs if it is waiting for the SYNCHRONIZE CACHE
> command submitted by the sd driver to finish if the block layer queue is
> stopped and does not get restarted. This patch series avoids that that
> hang occurs.
>
> Changes compared to v2:
> - Moved the "stop_disk" assignment after the sdkp check in the sd driver.
> - Added a completion function for asynchronous SYNCHRONIZE CACHE commands.
> - Added "disk" and "done" arguments to scsi_execute_async().
>
> Changes compared to v1:
> - Reworked the approach of this patch series.
>
> Bart Van Assche (4):
>    Introduce scsi_start_queue()
>    Introduce scsi_execute_async()
>    sd: Make synchronize cache upon shutdown asynchronous
>    Avoid that __scsi_remove_device() hangs
>
>   drivers/scsi/scsi_lib.c    | 114 ++++++++++++++++++++++++++++++++++-----------
>   drivers/scsi/scsi_priv.h   |   1 +
>   drivers/scsi/scsi_sysfs.c  |   9 ++++
>   drivers/scsi/sd.c          |  45 ++++++++++++++++--
>   include/scsi/scsi_device.h |   5 ++
>   5 files changed, 142 insertions(+), 32 deletions(-)
>
Hi Bart,

I tested those patches and I got a NULL dereference at sd_sync_cache_done().
The test is unloading ib_srp while one port is down.
The previous version worked fine.

 From the log:
[  190.260240] sd 8:0:0:0: [sdc] Synchronizing SCSI cache
[  190.266412] scsi 8:0:0:0: rejecting I/O to dead device
[  190.272412] BUG: unable to handle kernel NULL pointer dereference at 
00000000000002f0
[  190.281102] IP: sd_sync_cache_done+0x1b/0x80 [sd_mod]
[  190.482738] Call Trace:
[  190.486052]  blk_finish_request+0x73/0x130
[  190.491007]  __blk_end_bidi_request+0x2d/0x40
[  190.496215]  __blk_end_request_all+0x1f/0x40
[  190.501338]  blk_peek_request+0x1c5/0x2b0
[  190.506203]  scsi_request_fn+0x3f/0x6c0
[  190.510888]  ? kobject_put+0x1f/0x60
[  190.515305]  __blk_run_queue+0x33/0x40
[  190.519877]  blk_start_queue+0x29/0x40
[  190.524438]  scsi_start_queue+0x40/0x60
[  190.529081]  __scsi_remove_device+0x4d/0xe0
[  190.534079]  scsi_forget_host+0x60/0x70
[  190.538738]  scsi_remove_host+0x77/0x110
[  190.543462]  srp_remove_work+0x90/0x230 [ib_srp]

Regards,
Israel.

Re: [PATCH v3 3/4] sd: Make synchronize cache upon shutdown asynchronous

[Benjamin Block]

Hej Bart,

sry for the late'ish reply, had a long weekend.

On Thu, Apr 13, 2017 at 12:28:54AM +0000, Bart Van Assche wrote:
> On Wed, 2017-04-12 at 16:41 +0200, Benjamin Block wrote:
> > On Mon, Apr 10, 2017 at 10:54:01AM -0700, Bart Van Assche wrote:
> > > [ ... ]
> > OK, so I take it the problem is when the queue is stopped, then the
> > completion in blk_execute_rq() will never be triggered and then we wait
> > for a timeout there, or potentially forever?
>
> Hello Benjamin,
>
> Thanks for the review.
>
> If a request is queued after a queue has been stopped then that request
> will never be started and hence even the timeout timer won't be started.
> blk_cleanup_queue() hangs if invoked for a stopped queue and one or more
> requests have not yet been started.
>
> > But then what is the point in trying to do it async here anyway? Won't
> > that just be doomed in the same way, just that we don't see the effect?
>
> Have you noticed that patch 4/4 in this series restarts the queue just
> before calling blk_cleanup_queue()?
>
> Anyway, can you have a look at the patch below and see whether this new
> version addresses all the concerns you had reported in your previous
> e-mail?
>

Yes, the code- and comment-changes in sd_shutdown() are good. Apparently
there is something new with the done-function now, but you got that from
Israel.

I still wonder why we try 'so hard' scheduling a command for a dead
device, but as that seems to be the status quo, and only lacks in the
case where the LLD is already half-way gone, its ok for me too. I mean,
the order is a bit screwed.. we apparently first remove the driver and
post-factum try to drain the queue.. that is strange.


- Benjamin

On Mon, Apr 17, 2017 at 10:34:35AM -0700, Bart Van Assche wrote:
> This patch avoids that sd_shutdown() hangs on the SYNCHRONIZE CACHE
> command if the block layer queue has been stopped by
> scsi_target_block().
> 
> Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com>
> Cc: Israel Rukshin <israelr@mellanox.com>
> Cc: Max Gurtovoy <maxg@mellanox.com>
> Cc: Hannes Reinecke <hare@suse.de>
> Cc: Benjamin Block <bblock@linux.vnet.ibm.com>
> ---
>  drivers/scsi/sd.c | 45 ++++++++++++++++++++++++++++++++++++++++-----
>  1 file changed, 40 insertions(+), 5 deletions(-)
> 
> diff --git a/drivers/scsi/sd.c b/drivers/scsi/sd.c
> index fe0f7997074e..deff564fe649 100644
> --- a/drivers/scsi/sd.c
> +++ b/drivers/scsi/sd.c
> @@ -1489,6 +1489,33 @@ static unsigned int sd_check_events(struct gendisk *disk, unsigned int clearing)
>  	return retval;
>  }
> 
> +static void sd_sync_cache_done(struct request *rq, int e)
> +{
> +	struct scsi_disk *sdkp = scsi_disk(rq->rq_disk);
> +
> +	sd_printk(KERN_DEBUG, sdkp, "%s\n", __func__);
> +
> +	blk_put_request(rq);
> +}
> +
> +/*
> + * Issue a SYNCHRONIZE CACHE command asynchronously. Since blk_cleanup_queue()
> + * waits for all commands to finish, __scsi_remove_device() will wait for the
> + * SYNCHRONIZE CACHE command to finish.
> + */
> +static int sd_sync_cache_async(struct scsi_disk *sdkp)
> +{
> +	const struct scsi_device *sdp = sdkp->device;
> +	const int timeout = sdp->request_queue->rq_timeout *
> +			    SD_FLUSH_TIMEOUT_MULTIPLIER;
> +	const unsigned char cmd[10] = { SYNCHRONIZE_CACHE };
> +
> +	sd_printk(KERN_DEBUG, sdkp, "%s\n", __func__);
> +	return scsi_execute_async(sdp, sdkp->disk, cmd, DMA_NONE, NULL, 0,
> +				  timeout, SD_MAX_RETRIES, 0, 0,
> +				  sd_sync_cache_done);
> +}
> +
>  static int sd_sync_cache(struct scsi_disk *sdkp)
>  {
>  	int retries, res;
> @@ -3349,13 +3376,15 @@ static int sd_start_stop_device(struct scsi_disk *sdkp, int start)
>  }
> 
>  /*
> - * Send a SYNCHRONIZE CACHE instruction down to the device through
> - * the normal SCSI command structure.  Wait for the command to
> - * complete.
> + * Send a SYNCHRONIZE CACHE instruction down to the device through the normal
> + * SCSI command structure. When stopping the disk, wait for the command to
> + * complete. When not stopping the disk, the blk_cleanup_queue() call in
> + * __scsi_remove_device() will wait for this command to complete.
>   */
>  static void sd_shutdown(struct device *dev)
>  {
>  	struct scsi_disk *sdkp = dev_get_drvdata(dev);
> +	bool stop_disk;
> 
>  	if (!sdkp)
>  		return;         /* this can happen */
> @@ -3363,12 +3392,18 @@ static void sd_shutdown(struct device *dev)
>  	if (pm_runtime_suspended(dev))
>  		return;
> 
> +	stop_disk = system_state != SYSTEM_RESTART &&
> +		sdkp->device->manage_start_stop;
> +
>  	if (sdkp->WCE && sdkp->media_present) {
>  		sd_printk(KERN_NOTICE, sdkp, "Synchronizing SCSI cache\n");
> -		sd_sync_cache(sdkp);
> +		if (stop_disk)
> +			sd_sync_cache(sdkp);
> +		else
> +			sd_sync_cache_async(sdkp);
>  	}
> 
> -	if (system_state != SYSTEM_RESTART && sdkp->device->manage_start_stop) {
> +	if (stop_disk) {
>  		sd_printk(KERN_NOTICE, sdkp, "Stopping disk\n");
>  		sd_start_stop_device(sdkp, 0);
>  	}
> -- 
> 2.12.2
> 

-- 
Linux on z Systems Development         /         IBM Systems & Technology Group
		  IBM Deutschland Research & Development GmbH 
Vorsitz. AufsR.: Martina Koederitz     /        Geschäftsführung: Dirk Wittkopp
Sitz der Gesellschaft: Böblingen / Registergericht: AmtsG Stuttgart, HRB 243294

Re: [PATCH v3 3/4] sd: Make synchronize cache upon shutdown asynchronous

[Bart Van Assche]

On Tue, 2017-04-18 at 16:44 +0200, Benjamin Block wrote:
> I still wonder why we try 'so hard' scheduling a command for a dead
> device, but as that seems to be the status quo, and only lacks in the
> case where the LLD is already half-way gone, its ok for me too. I mean,
> the order is a bit screwed.. we apparently first remove the driver and
> post-factum try to drain the queue.. that is strange.

Hello Benjamin,

That's indeed strange. But I'm not sure whether it is possible to address
this without changing all SCSI LLDs.

Bart.

Re: [PATCH v3 0/4] Avoid that __scsi_remove_device() hangs

[Bart Van Assche]

On Tue, 2017-04-18 at 14:58 +0300, Israel Rukshin wrote:
> I tested those patches and I got a NULL dereference at sd_sync_cache_done().
> The test is unloading ib_srp while one port is down.
> The previous version worked fine.
> 
> From the log:
> [  190.272412] BUG: unable to handle kernel NULL pointer dereference at 
> 00000000000002f0
> [  190.281102] IP: sd_sync_cache_done+0x1b/0x80 [sd_mod]

Hello Israel,

Thanks for testing. I assume that this data refers to the sd_printk() statement?
That statement was executed properly in my tests. Anyway, I will leave out that
statement, retest and repost this patch series. There is a del_gendisk() call in
sd just before the sd_shutdown() call so that means it's not safe to access the
disk pointer from anywhere in sd_shutdown().

Bart.

Re: [PATCH v3 3/4] sd: Make synchronize cache upon shutdown asynchronous

[James Bottomley]

On Tue, 2017-04-18 at 16:44 +0200, Benjamin Block wrote:
> Hej Bart,
> 
> sry for the late'ish reply, had a long weekend.
> 
> On Thu, Apr 13, 2017 at 12:28:54AM +0000, Bart Van Assche wrote:
> > On Wed, 2017-04-12 at 16:41 +0200, Benjamin Block wrote:
> > > On Mon, Apr 10, 2017 at 10:54:01AM -0700, Bart Van Assche wrote:
> > > > [ ... ]
> > > OK, so I take it the problem is when the queue is stopped, then 
> > > the completion in blk_execute_rq() will never be triggered and 
> > > then we wait for a timeout there, or potentially forever?
> > 
> > Hello Benjamin,
> > 
> > Thanks for the review.
> > 
> > If a request is queued after a queue has been stopped then that 
> > request will never be started and hence even the timeout timer 
> > won't be started. blk_cleanup_queue() hangs if invoked for a 
> > stopped queue and one or more requests have not yet been started.
> > 
> > > But then what is the point in trying to do it async here anyway? 
> > > Won't that just be doomed in the same way, just that we don't see 
> > > the effect?
> > 
> > Have you noticed that patch 4/4 in this series restarts the queue 
> > just before calling blk_cleanup_queue()?
> > 
> > Anyway, can you have a look at the patch below and see whether this 
> > new version addresses all the concerns you had reported in your
> > previous e-mail?
> > 
> 
> Yes, the code- and comment-changes in sd_shutdown() are good. 
> Apparently there is something new with the done-function now, but you 
> got that from Israel.
> 
> I still wonder why we try 'so hard' scheduling a command for a dead
> device, but as that seems to be the status quo, and only lacks in the
> case where the LLD is already half-way gone, its ok for me too. I 
> mean, the order is a bit screwed.. we apparently first remove the 
> driver and post-factum try to drain the queue.. that is strange.

Yes, I've said all along that adding asynchronicity is only going to
add more problems.

The priority has got to be the removal we've been ordered to do rather
than waiting around to see if the transport comes back so we can send a
final flush.

How about this approach.  It goes straight to DEL if the device is
blocked (skipping CANCEL).  This means that all the commands issued in 
->shutdown will error in the mid-layer, thus making the removal proceed
without being stopped.

James

---

diff --git a/drivers/scsi/scsi_lib.c b/drivers/scsi/scsi_lib.c
index e5a2d590a104..31171204cfd1 100644
--- a/drivers/scsi/scsi_lib.c
+++ b/drivers/scsi/scsi_lib.c
@@ -2611,7 +2611,6 @@ scsi_device_set_state(struct scsi_device *sdev, enum scsi_device_state state)
 		case SDEV_QUIESCE:
 		case SDEV_OFFLINE:
 		case SDEV_TRANSPORT_OFFLINE:
-		case SDEV_BLOCK:
 			break;
 		default:
 			goto illegal;
@@ -2625,6 +2624,7 @@ scsi_device_set_state(struct scsi_device *sdev, enum scsi_device_state state)
 		case SDEV_OFFLINE:
 		case SDEV_TRANSPORT_OFFLINE:
 		case SDEV_CANCEL:
+		case SDEV_BLOCK:
 		case SDEV_CREATED_BLOCK:
 			break;
 		default:
diff --git a/drivers/scsi/scsi_sysfs.c b/drivers/scsi/scsi_sysfs.c
index 82dfe07b1d47..788309e307e9 100644
--- a/drivers/scsi/scsi_sysfs.c
+++ b/drivers/scsi/scsi_sysfs.c
@@ -1282,8 +1282,14 @@ void __scsi_remove_device(struct scsi_device *sdev)
 		return;
 
 	if (sdev->is_visible) {
+		/*
+		 * If blocked, we go straight to DEL so any commands
+		 * issued during the driver shutdown (like sync cache)
+		 * are errored
+		 */
 		if (scsi_device_set_state(sdev, SDEV_CANCEL) != 0)
-			return;
+			if (scsi_device_set_state(sdev, SDEV_DEL) != 0)
+				return;
 
 		bsg_unregister_queue(sdev->request_queue);
 		device_unregister(&sdev->sdev_dev);

Re: [PATCH v3 3/4] sd: Make synchronize cache upon shutdown asynchronous

[Bart Van Assche]

On Tue, 2017-04-18 at 08:56 -0700, James Bottomley wrote:
> How about this approach.  It goes straight to DEL if the device is
> blocked (skipping CANCEL).  This means that all the commands issued in 
> ->shutdown will error in the mid-layer, thus making the removal proceed
> without being stopped.

Hello James,

I think that's a good start but not a full solution. The block layer queue
still needs to be restarted to make sure that any requests that got queued
after the transition to the SDEV_BLOCK state and before the transition to
SDEV_DEL get processed. Anyway, I will see whether I can come up with a
patch based on this approach.

Bart.

Re: [PATCH v3 3/4] sd: Make synchronize cache upon shutdown asynchronous

[Bart Van Assche]

[-- Attachment #1: Type: text/plain, Size: 563 bytes --]

On Tue, 2017-04-18 at 08:56 -0700, James Bottomley wrote:
> How about this approach.  It goes straight to DEL if the device is
> blocked (skipping CANCEL).  This means that all the commands issued in 
> ->shutdown will error in the mid-layer, thus making the removal proceed
> without being stopped.

Hello James,

The three attached patches pass my tests. Please let me know how you would
like to proceed with patch 1/3. Would you like to submit it yourself or is
it OK for you if I mention you as author and add your Signed-off-by?

Thanks,

Bart.

[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #2: 0001-Make-__scsi_remove_device-go-straight-from-BLOCKED-t.patch --]
[-- Type: text/x-patch; name="0001-Make-__scsi_remove_device-go-straight-from-BLOCKED-t.patch", Size: 2470 bytes --]

From 9482fdc8b322f15ced6f64d57f45026367604a23 Mon Sep 17 00:00:00 2001
From: Bart Van Assche <bart.vanassche@sandisk.com>
Date: Tue, 18 Apr 2017 10:11:02 -0700
Subject: [PATCH 1/3] Make __scsi_remove_device go straight from BLOCKED to DEL

If a device is blocked, make __scsi_remove_device() cause it to
transition to the DEL state. This means that all the commands
issued in .shutdown() will error in the mid-layer, thus making
the removal proceed without being stopped.

This patch is a slightly modified version of a patch from James
Bottomley.

Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Cc: Israel Rukshin <israelr@mellanox.com>
Cc: Max Gurtovoy <maxg@mellanox.com>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Benjamin Block <bblock@linux.vnet.ibm.com>
---
 drivers/scsi/scsi_lib.c   |  2 +-
 drivers/scsi/scsi_sysfs.c | 12 +++++++++++-
 2 files changed, 12 insertions(+), 2 deletions(-)

diff --git a/drivers/scsi/scsi_lib.c b/drivers/scsi/scsi_lib.c
index eecc005099b2..277c8b3ae7b0 100644
--- a/drivers/scsi/scsi_lib.c
+++ b/drivers/scsi/scsi_lib.c
@@ -2611,7 +2611,6 @@ scsi_device_set_state(struct scsi_device *sdev, enum scsi_device_state state)
 		case SDEV_QUIESCE:
 		case SDEV_OFFLINE:
 		case SDEV_TRANSPORT_OFFLINE:
-		case SDEV_BLOCK:
 			break;
 		default:
 			goto illegal;
@@ -2625,6 +2624,7 @@ scsi_device_set_state(struct scsi_device *sdev, enum scsi_device_state state)
 		case SDEV_OFFLINE:
 		case SDEV_TRANSPORT_OFFLINE:
 		case SDEV_CANCEL:
+		case SDEV_BLOCK:
 		case SDEV_CREATED_BLOCK:
 			break;
 		default:
diff --git a/drivers/scsi/scsi_sysfs.c b/drivers/scsi/scsi_sysfs.c
index 82dfe07b1d47..f95d191ec809 100644
--- a/drivers/scsi/scsi_sysfs.c
+++ b/drivers/scsi/scsi_sysfs.c
@@ -1282,9 +1282,19 @@ void __scsi_remove_device(struct scsi_device *sdev)
 		return;
 
 	if (sdev->is_visible) {
-		if (scsi_device_set_state(sdev, SDEV_CANCEL) != 0)
+		/*
+		 * If blocked, we go straight to DEL so any commands
+		 * issued during the driver shutdown (like sync cache)
+		 * are errored.
+		 */
+		if (scsi_device_set_state(sdev, SDEV_CANCEL) != 0 &&
+		    scsi_device_set_state(sdev, SDEV_DEL) != 0)
 			return;
 
+		if (sdev->sdev_state == SDEV_DEL)
+			sdev_printk(KERN_DEBUG, sdev,
+				    "Changed state from BLOCKED to DEL\n");
+
 		bsg_unregister_queue(sdev->request_queue);
 		device_unregister(&sdev->sdev_dev);
 		transport_remove_device(dev);
-- 
2.12.2


[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #3: 0002-Introduce-scsi_start_queue.patch --]
[-- Type: text/x-patch; name="0002-Introduce-scsi_start_queue.patch", Size: 2756 bytes --]

From c3f85b714fcfb12d43669b7f295a09f4718c2704 Mon Sep 17 00:00:00 2001
From: Bart Van Assche <bart.vanassche@sandisk.com>
Date: Tue, 28 Mar 2017 14:00:17 -0700
Subject: [PATCH 2/3] Introduce scsi_start_queue()

This patch does not change any functionality.

Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com>
Cc: Israel Rukshin <israelr@mellanox.com>
Cc: Max Gurtovoy <maxg@mellanox.com>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Benjamin Block <bblock@linux.vnet.ibm.com>
---
 drivers/scsi/scsi_lib.c  | 25 +++++++++++++++----------
 drivers/scsi/scsi_priv.h |  1 +
 2 files changed, 16 insertions(+), 10 deletions(-)

diff --git a/drivers/scsi/scsi_lib.c b/drivers/scsi/scsi_lib.c
index 277c8b3ae7b0..376cd1da102c 100644
--- a/drivers/scsi/scsi_lib.c
+++ b/drivers/scsi/scsi_lib.c
@@ -2987,6 +2987,20 @@ scsi_internal_device_block(struct scsi_device *sdev, bool wait)
 }
 EXPORT_SYMBOL_GPL(scsi_internal_device_block);
  
+void scsi_start_queue(struct scsi_device *sdev)
+{
+	struct request_queue *q = sdev->request_queue;
+	unsigned long flags;
+
+	if (q->mq_ops) {
+		blk_mq_start_stopped_hw_queues(q, false);
+	} else {
+		spin_lock_irqsave(q->queue_lock, flags);
+		blk_start_queue(q);
+		spin_unlock_irqrestore(q->queue_lock, flags);
+	}
+}
+
 /**
  * scsi_internal_device_unblock - resume a device after a block request
  * @sdev:	device to resume
@@ -3007,9 +3021,6 @@ int
 scsi_internal_device_unblock(struct scsi_device *sdev,
 			     enum scsi_device_state new_state)
 {
-	struct request_queue *q = sdev->request_queue; 
-	unsigned long flags;
-
 	/*
 	 * Try to transition the scsi device to SDEV_RUNNING or one of the
 	 * offlined states and goose the device queue if successful.
@@ -3027,13 +3038,7 @@ scsi_internal_device_unblock(struct scsi_device *sdev,
 		 sdev->sdev_state != SDEV_OFFLINE)
 		return -EINVAL;
 
-	if (q->mq_ops) {
-		blk_mq_start_stopped_hw_queues(q, false);
-	} else {
-		spin_lock_irqsave(q->queue_lock, flags);
-		blk_start_queue(q);
-		spin_unlock_irqrestore(q->queue_lock, flags);
-	}
+	scsi_start_queue(sdev);
 
 	return 0;
 }
diff --git a/drivers/scsi/scsi_priv.h b/drivers/scsi/scsi_priv.h
index f11bd102d6d5..c7629e31a75b 100644
--- a/drivers/scsi/scsi_priv.h
+++ b/drivers/scsi/scsi_priv.h
@@ -89,6 +89,7 @@ extern void scsi_run_host_queues(struct Scsi_Host *shost);
 extern void scsi_requeue_run_queue(struct work_struct *work);
 extern struct request_queue *scsi_alloc_queue(struct scsi_device *sdev);
 extern struct request_queue *scsi_mq_alloc_queue(struct scsi_device *sdev);
+extern void scsi_start_queue(struct scsi_device *sdev);
 extern int scsi_mq_setup_tags(struct Scsi_Host *shost);
 extern void scsi_mq_destroy_tags(struct Scsi_Host *shost);
 extern int scsi_init_queue(void);
-- 
2.12.2


[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #4: 0003-Avoid-that-__scsi_remove_device-hangs.patch --]
[-- Type: text/x-patch; name="0003-Avoid-that-__scsi_remove_device-hangs.patch", Size: 2422 bytes --]

From c383551a721d30d897d45244acd331ff0af94656 Mon Sep 17 00:00:00 2001
From: Bart Van Assche <bart.vanassche@sandisk.com>
Date: Tue, 28 Mar 2017 14:00:25 -0700
Subject: [PATCH 3/3] Avoid that __scsi_remove_device() hangs

Since scsi_target_unblock() uses starget_for_each_device(), since
starget_for_each_device() uses scsi_device_get(), since
scsi_device_get() fails after unloading of the LLD kernel module
has been started scsi_target_unblock() may skip devices that were
affected by scsi_target_block(). Ensure that __scsi_remove_device()
does not hang for blocked SCSI devices. This patch avoids that
unloading the ib_srp kernel module can trigger the following hang:

Call Trace:
 schedule+0x35/0x80
 schedule_timeout+0x237/0x2d0
 io_schedule_timeout+0xa6/0x110
 wait_for_completion_io+0xa3/0x110
 blk_execute_rq+0xdf/0x120
 scsi_execute+0xce/0x150 [scsi_mod]
 scsi_execute_req_flags+0x8f/0xf0 [scsi_mod]
 sd_sync_cache+0xa9/0x190 [sd_mod]
 sd_shutdown+0x6a/0x100 [sd_mod]
 sd_remove+0x64/0xc0 [sd_mod]
 __device_release_driver+0x8d/0x120
 device_release_driver+0x1e/0x30
 bus_remove_device+0xf9/0x170
 device_del+0x127/0x240
 __scsi_remove_device+0xc1/0xd0 [scsi_mod]
 scsi_forget_host+0x57/0x60 [scsi_mod]
 scsi_remove_host+0x72/0x110 [scsi_mod]
 srp_remove_work+0x8b/0x200 [ib_srp]

Reported-by: Israel Rukshin <israelr@mellanox.com>
Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com>
Cc: Max Gurtovoy <maxg@mellanox.com>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Benjamin Block <bblock@linux.vnet.ibm.com>
---
 drivers/scsi/scsi_sysfs.c | 9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/drivers/scsi/scsi_sysfs.c b/drivers/scsi/scsi_sysfs.c
index f95d191ec809..e9e80241ab5e 100644
--- a/drivers/scsi/scsi_sysfs.c
+++ b/drivers/scsi/scsi_sysfs.c
@@ -1309,6 +1309,15 @@ void __scsi_remove_device(struct scsi_device *sdev)
 	 * device.
 	 */
 	scsi_device_set_state(sdev, SDEV_DEL);
+	/*
+	 * Since scsi_target_unblock() is a no-op after unloading of the SCSI
+	 * LLD has started, explicitly restart the queue. Do this after the
+	 * device state has been changed into SDEV_DEL because
+	 * scsi_prep_state_check() returns BLKPREP_KILL for the SDEV_DEL state
+	 * Do this before calling blk_cleanup_queue() to avoid that that
+	 * function encounters a stopped queue.
+	 */
+	scsi_start_queue(sdev);
 	blk_cleanup_queue(sdev->request_queue);
 	cancel_work_sync(&sdev->requeue_work);
 
-- 
2.12.2

Re: [PATCH v3 3/4] sd: Make synchronize cache upon shutdown asynchronous

[James Bottomley]

On Tue, 2017-04-18 at 23:47 +0000, Bart Van Assche wrote:
> On Tue, 2017-04-18 at 08:56 -0700, James Bottomley wrote:
> > How about this approach.  It goes straight to DEL if the device is
> > blocked (skipping CANCEL).  This means that all the commands issued
> > in 
> > ->shutdown will error in the mid-layer, thus making the removal
> > proceed
> > without being stopped.
> 
> Hello James,
> 
> The three attached patches pass my tests. Please let me know how you 
> would like to proceed with patch 1/3. Would you like to submit it 
> yourself or is it OK for you if I mention you as author and add your
> Signed-off-by?

Actually, I think 3/3 is wrong.  You need to start the queue as soon as
we see it's blocked and the device has gone into DEL.  This is safe
because DEL ensures nothing ever gets from the generic request function
to queuecommand, so the device driver never sees anything.

This means the combined 1/3 3/3 patch looks like this:

James

---

diff --git a/drivers/scsi/scsi_lib.c b/drivers/scsi/scsi_lib.c
index e5a2d590a104..31171204cfd1 100644
--- a/drivers/scsi/scsi_lib.c
+++ b/drivers/scsi/scsi_lib.c
@@ -2611,7 +2611,6 @@ scsi_device_set_state(struct scsi_device *sdev, enum scsi_device_state state)
 		case SDEV_QUIESCE:
 		case SDEV_OFFLINE:
 		case SDEV_TRANSPORT_OFFLINE:
-		case SDEV_BLOCK:
 			break;
 		default:
 			goto illegal;
@@ -2625,6 +2624,7 @@ scsi_device_set_state(struct scsi_device *sdev, enum scsi_device_state state)
 		case SDEV_OFFLINE:
 		case SDEV_TRANSPORT_OFFLINE:
 		case SDEV_CANCEL:
+		case SDEV_BLOCK:
 		case SDEV_CREATED_BLOCK:
 			break;
 		default:
diff --git a/drivers/scsi/scsi_sysfs.c b/drivers/scsi/scsi_sysfs.c
index 82dfe07b1d47..e477f95bf169 100644
--- a/drivers/scsi/scsi_sysfs.c
+++ b/drivers/scsi/scsi_sysfs.c
@@ -1282,8 +1282,17 @@ void __scsi_remove_device(struct scsi_device *sdev)
 		return;
 
 	if (sdev->is_visible) {
-		if (scsi_device_set_state(sdev, SDEV_CANCEL) != 0)
-			return;
+		/*
+		 * If blocked, we go straight to DEL so any commands
+		 * issued during the driver shutdown (like sync cache)
+		 * are errored
+		 */
+		if (scsi_device_set_state(sdev, SDEV_CANCEL) != 0) {
+			if (scsi_device_set_state(sdev, SDEV_DEL) != 0)
+				return;
+			else
+				scsi_start_queue(sdev);
+		}
 
 		bsg_unregister_queue(sdev->request_queue);
 		device_unregister(&sdev->sdev_dev);

Re: [PATCH v3 3/4] sd: Make synchronize cache upon shutdown asynchronous

[Bart Van Assche]

On Tue, 2017-04-18 at 16:56 -0700, James Bottomley wrote:
> Actually, I think 3/3 is wrong.  You need to start the queue as soon as
> we see it's blocked and the device has gone into DEL.  This is safe
> because DEL ensures nothing ever gets from the generic request function
> to queuecommand, so the device driver never sees anything.

Hello James,

I agree that restarting the queue earlier is safe but I do not agree that
patch 3/3 is wrong. Can you explain why you think that patch 3/3 is wrong?

Thanks,

Bart.

Re: [PATCH v3 3/4] sd: Make synchronize cache upon shutdown asynchronous

[James Bottomley]

On Wed, 2017-04-19 at 00:02 +0000, Bart Van Assche wrote:
> On Tue, 2017-04-18 at 16:56 -0700, James Bottomley wrote:
> > Actually, I think 3/3 is wrong.  You need to start the queue as 
> > soon as we see it's blocked and the device has gone into DEL.  This 
> > is safe because DEL ensures nothing ever gets from the generic 
> > request function to queuecommand, so the device driver never sees
> > anything.
> 
> Hello James,
> 
> I agree that restarting the queue earlier is safe but I do not agree 
> that patch 3/3 is wrong. Can you explain why you think that patch 3/3 
> is wrong?

The shutdown occurs in driver removal, which precedes the queue start
in 3/3.  To avoid hangs and timeouts, we need the queue to be started
before the driver shutdown tries to inject commands.  They're not
fatal, but they will likely show up as annoying messages (and time
delays) which we can avoid by starting the queue the moment we go into
DEL.

James

Re: [PATCH v3 3/4] sd: Make synchronize cache upon shutdown asynchronous

[Bart Van Assche]

[-- Attachment #1: Type: text/plain, Size: 354 bytes --]

On Tue, 2017-04-18 at 16:56 -0700, James Bottomley wrote:
> This means the combined 1/3 3/3 patch looks like this:
> [ ... ]

Hello James,

The two attached patches pass my tests. How would you like to proceed
with patch 1/2? Would you like to submit it yourself or is it OK for you
if I mention you as author and add your Signed-off-by?

Bart.

[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #2: 0001-Introduce-scsi_start_queue.patch --]
[-- Type: text/x-patch; name="0001-Introduce-scsi_start_queue.patch", Size: 2756 bytes --]

From c395ce2aaf6d8a644311f4c55dfa6aa560a93240 Mon Sep 17 00:00:00 2001
From: Bart Van Assche <bart.vanassche@sandisk.com>
Date: Tue, 28 Mar 2017 14:00:17 -0700
Subject: [PATCH 1/2] Introduce scsi_start_queue()

This patch does not change any functionality.

Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com>
Cc: Israel Rukshin <israelr@mellanox.com>
Cc: Max Gurtovoy <maxg@mellanox.com>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Benjamin Block <bblock@linux.vnet.ibm.com>
---
 drivers/scsi/scsi_lib.c  | 25 +++++++++++++++----------
 drivers/scsi/scsi_priv.h |  1 +
 2 files changed, 16 insertions(+), 10 deletions(-)

diff --git a/drivers/scsi/scsi_lib.c b/drivers/scsi/scsi_lib.c
index eecc005099b2..ffa6e61299a9 100644
--- a/drivers/scsi/scsi_lib.c
+++ b/drivers/scsi/scsi_lib.c
@@ -2987,6 +2987,20 @@ scsi_internal_device_block(struct scsi_device *sdev, bool wait)
 }
 EXPORT_SYMBOL_GPL(scsi_internal_device_block);
  
+void scsi_start_queue(struct scsi_device *sdev)
+{
+	struct request_queue *q = sdev->request_queue;
+	unsigned long flags;
+
+	if (q->mq_ops) {
+		blk_mq_start_stopped_hw_queues(q, false);
+	} else {
+		spin_lock_irqsave(q->queue_lock, flags);
+		blk_start_queue(q);
+		spin_unlock_irqrestore(q->queue_lock, flags);
+	}
+}
+
 /**
  * scsi_internal_device_unblock - resume a device after a block request
  * @sdev:	device to resume
@@ -3007,9 +3021,6 @@ int
 scsi_internal_device_unblock(struct scsi_device *sdev,
 			     enum scsi_device_state new_state)
 {
-	struct request_queue *q = sdev->request_queue; 
-	unsigned long flags;
-
 	/*
 	 * Try to transition the scsi device to SDEV_RUNNING or one of the
 	 * offlined states and goose the device queue if successful.
@@ -3027,13 +3038,7 @@ scsi_internal_device_unblock(struct scsi_device *sdev,
 		 sdev->sdev_state != SDEV_OFFLINE)
 		return -EINVAL;
 
-	if (q->mq_ops) {
-		blk_mq_start_stopped_hw_queues(q, false);
-	} else {
-		spin_lock_irqsave(q->queue_lock, flags);
-		blk_start_queue(q);
-		spin_unlock_irqrestore(q->queue_lock, flags);
-	}
+	scsi_start_queue(sdev);
 
 	return 0;
 }
diff --git a/drivers/scsi/scsi_priv.h b/drivers/scsi/scsi_priv.h
index f11bd102d6d5..c7629e31a75b 100644
--- a/drivers/scsi/scsi_priv.h
+++ b/drivers/scsi/scsi_priv.h
@@ -89,6 +89,7 @@ extern void scsi_run_host_queues(struct Scsi_Host *shost);
 extern void scsi_requeue_run_queue(struct work_struct *work);
 extern struct request_queue *scsi_alloc_queue(struct scsi_device *sdev);
 extern struct request_queue *scsi_mq_alloc_queue(struct scsi_device *sdev);
+extern void scsi_start_queue(struct scsi_device *sdev);
 extern int scsi_mq_setup_tags(struct Scsi_Host *shost);
 extern void scsi_mq_destroy_tags(struct Scsi_Host *shost);
 extern int scsi_init_queue(void);
-- 
2.12.2


[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #3: 0002-Make-__scsi_remove_device-go-straight-from-BLOCKED-t.patch --]
[-- Type: text/x-patch; name="0002-Make-__scsi_remove_device-go-straight-from-BLOCKED-t.patch", Size: 2480 bytes --]

From 540cd36d79a46c634368365d3f0f5b8adf4fd687 Mon Sep 17 00:00:00 2001
From: Bart Van Assche <bart.vanassche@sandisk.com>
Date: Tue, 18 Apr 2017 10:11:02 -0700
Subject: [PATCH 2/2] Make __scsi_remove_device go straight from BLOCKED to DEL

If a device is blocked, make __scsi_remove_device() cause it to
transition to the DEL state. This means that all the commands
issued in .shutdown() will error in the mid-layer, thus making
the removal proceed without being stopped.

This patch is a slightly modified version of a patch from James
Bottomley.

Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Cc: Israel Rukshin <israelr@mellanox.com>
Cc: Max Gurtovoy <maxg@mellanox.com>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Benjamin Block <bblock@linux.vnet.ibm.com>
---
 drivers/scsi/scsi_lib.c   |  2 +-
 drivers/scsi/scsi_sysfs.c | 15 +++++++++++++--
 2 files changed, 14 insertions(+), 3 deletions(-)

diff --git a/drivers/scsi/scsi_lib.c b/drivers/scsi/scsi_lib.c
index ffa6e61299a9..376cd1da102c 100644
--- a/drivers/scsi/scsi_lib.c
+++ b/drivers/scsi/scsi_lib.c
@@ -2611,7 +2611,6 @@ scsi_device_set_state(struct scsi_device *sdev, enum scsi_device_state state)
 		case SDEV_QUIESCE:
 		case SDEV_OFFLINE:
 		case SDEV_TRANSPORT_OFFLINE:
-		case SDEV_BLOCK:
 			break;
 		default:
 			goto illegal;
@@ -2625,6 +2624,7 @@ scsi_device_set_state(struct scsi_device *sdev, enum scsi_device_state state)
 		case SDEV_OFFLINE:
 		case SDEV_TRANSPORT_OFFLINE:
 		case SDEV_CANCEL:
+		case SDEV_BLOCK:
 		case SDEV_CREATED_BLOCK:
 			break;
 		default:
diff --git a/drivers/scsi/scsi_sysfs.c b/drivers/scsi/scsi_sysfs.c
index 82dfe07b1d47..732f1873f2fb 100644
--- a/drivers/scsi/scsi_sysfs.c
+++ b/drivers/scsi/scsi_sysfs.c
@@ -1282,8 +1282,19 @@ void __scsi_remove_device(struct scsi_device *sdev)
 		return;
 
 	if (sdev->is_visible) {
-		if (scsi_device_set_state(sdev, SDEV_CANCEL) != 0)
-			return;
+		/*
+		 * If blocked, we go straight to DEL and restart the queue so
+		 * any commands issued during driver shutdown (like sync
+		 * cache) are errored immediately.
+		 */
+		if (scsi_device_set_state(sdev, SDEV_CANCEL) != 0) {
+			if (scsi_device_set_state(sdev, SDEV_DEL) != 0)
+				return;
+
+			scsi_start_queue(sdev);
+			sdev_printk(KERN_DEBUG, sdev,
+				    "Changed state from BLOCKED to DEL\n");
+		}
 
 		bsg_unregister_queue(sdev->request_queue);
 		device_unregister(&sdev->sdev_dev);
-- 
2.12.2

Re: [PATCH v3 3/4] sd: Make synchronize cache upon shutdown asynchronous

[Bart Van Assche]

On Tue, 2017-04-18 at 16:56 -0700, James Bottomley wrote:
> diff --git a/drivers/scsi/scsi_lib.c b/drivers/scsi/scsi_lib.c
> index e5a2d590a104..31171204cfd1 100644
> --- a/drivers/scsi/scsi_lib.c
> +++ b/drivers/scsi/scsi_lib.c
> @@ -2611,7 +2611,6 @@ scsi_device_set_state(struct scsi_device *sdev, enum scsi_device_state state)
>  		case SDEV_QUIESCE:
>  		case SDEV_OFFLINE:
>  		case SDEV_TRANSPORT_OFFLINE:
> -		case SDEV_BLOCK:
>  			break;
>  		default:
>  			goto illegal;
> @@ -2625,6 +2624,7 @@ scsi_device_set_state(struct scsi_device *sdev, enum scsi_device_state state)
>  		case SDEV_OFFLINE:
>  		case SDEV_TRANSPORT_OFFLINE:
>  		case SDEV_CANCEL:
> +		case SDEV_BLOCK:
>  		case SDEV_CREATED_BLOCK:
>  			break;
>  		default:
> diff --git a/drivers/scsi/scsi_sysfs.c b/drivers/scsi/scsi_sysfs.c
> index 82dfe07b1d47..e477f95bf169 100644
> --- a/drivers/scsi/scsi_sysfs.c
> +++ b/drivers/scsi/scsi_sysfs.c
> @@ -1282,8 +1282,17 @@ void __scsi_remove_device(struct scsi_device *sdev)
>  		return;
>  
>  	if (sdev->is_visible) {
> -		if (scsi_device_set_state(sdev, SDEV_CANCEL) != 0)
> -			return;
> +		/*
> +		 * If blocked, we go straight to DEL so any commands
> +		 * issued during the driver shutdown (like sync cache)
> +		 * are errored
> +		 */
> +		if (scsi_device_set_state(sdev, SDEV_CANCEL) != 0) {
> +			if (scsi_device_set_state(sdev, SDEV_DEL) != 0)
> +				return;
> +			else
> +				scsi_start_queue(sdev);
> +		}
>  
>  		bsg_unregister_queue(sdev->request_queue);
>  		device_unregister(&sdev->sdev_dev);

Hello James,

This approach cannot work. A scsi_target_block() call by the transport
layer can happen concurrently with the __scsi_remove_device() call and hence
can occur at any time between the scsi_start_queue() call by
__scsi_remove_device() and the sd_shutdown() call, resulting in a deadlock.
I have been able to trigger this with my tests by simulating a cable pull
shortly before running "rmmod ib_srp".

That deadlock did not occur with the patch series that makes synchronize
cache upon shutdown asynchronous. I'm going to resubmit that patch series.

Bart.

Re: [PATCH v3 3/4] sd: Make synchronize cache upon shutdown asynchronous

[James Bottomley]

On Thu, 2017-04-20 at 21:59 +0000, Bart Van Assche wrote:
> On Tue, 2017-04-18 at 16:56 -0700, James Bottomley wrote:
> > diff --git a/drivers/scsi/scsi_lib.c b/drivers/scsi/scsi_lib.c
> > index e5a2d590a104..31171204cfd1 100644
> > --- a/drivers/scsi/scsi_lib.c
> > +++ b/drivers/scsi/scsi_lib.c
> > @@ -2611,7 +2611,6 @@ scsi_device_set_state(struct scsi_device
> > *sdev, enum scsi_device_state state)
> >  		case SDEV_QUIESCE:
> >  		case SDEV_OFFLINE:
> >  		case SDEV_TRANSPORT_OFFLINE:
> > -		case SDEV_BLOCK:
> >  			break;
> >  		default:
> >  			goto illegal;
> > @@ -2625,6 +2624,7 @@ scsi_device_set_state(struct scsi_device
> > *sdev, enum scsi_device_state state)
> >  		case SDEV_OFFLINE:
> >  		case SDEV_TRANSPORT_OFFLINE:
> >  		case SDEV_CANCEL:
> > +		case SDEV_BLOCK:
> >  		case SDEV_CREATED_BLOCK:
> >  			break;
> >  		default:
> > diff --git a/drivers/scsi/scsi_sysfs.c b/drivers/scsi/scsi_sysfs.c
> > index 82dfe07b1d47..e477f95bf169 100644
> > --- a/drivers/scsi/scsi_sysfs.c
> > +++ b/drivers/scsi/scsi_sysfs.c
> > @@ -1282,8 +1282,17 @@ void __scsi_remove_device(struct scsi_device
> > *sdev)
> >  		return;
> >  
> >  	if (sdev->is_visible) {
> > -		if (scsi_device_set_state(sdev, SDEV_CANCEL) != 0)
> > -			return;
> > +		/*
> > +		 * If blocked, we go straight to DEL so any
> > commands
> > +		 * issued during the driver shutdown (like sync
> > cache)
> > +		 * are errored
> > +		 */
> > +		if (scsi_device_set_state(sdev, SDEV_CANCEL) != 0)
> > {
> > +			if (scsi_device_set_state(sdev, SDEV_DEL)
> > != 0)
> > +				return;
> > +			else
> > +				scsi_start_queue(sdev);
> > +		}
> >  
> >  		bsg_unregister_queue(sdev->request_queue);
> >  		device_unregister(&sdev->sdev_dev);
> 
> Hello James,
> 
> This approach cannot work. A scsi_target_block() call by the 
> transport layer can happen concurrently with the 
> __scsi_remove_device() call and hence can occur at any time between 
> the scsi_start_queue() call by __scsi_remove_device() and the 
> sd_shutdown() call, resulting in a deadlock.

How is that possible?  Once the device goes into the CANCEL state, it
no longer can be found by starget_for_each_device() because
scsi_device_get() returns NULL ... unless you also have a patch
altering that?

James


> I have been able to trigger this with my tests by simulating a cable 
> pull shortly before running "rmmod ib_srp".
> 
> That deadlock did not occur with the patch series that makes 
> synchronize cache upon shutdown asynchronous. I'm going to resubmit 
> that patch series.
> 
> Bart.

Re: [PATCH v3 3/4] sd: Make synchronize cache upon shutdown asynchronous

[Bart Van Assche]

[-- Attachment #1: Type: text/plain, Size: 3080 bytes --]

On Thu, 2017-04-20 at 15:13 -0700, James Bottomley wrote:
> On Thu, 2017-04-20 at 21:59 +0000, Bart Van Assche wrote:
> > This approach cannot work. A scsi_target_block() call by the 
> > transport layer can happen concurrently with the 
> > __scsi_remove_device() call and hence can occur at any time between 
> > the scsi_start_queue() call by __scsi_remove_device() and the 
> > sd_shutdown() call, resulting in a deadlock.
> 
> How is that possible?  Once the device goes into the CANCEL state, it
> no longer can be found by starget_for_each_device() because
> scsi_device_get() returns NULL ... unless you also have a patch
> altering that?

No changes were made in the SCSI core other than the attached two patches.
I'm not sure about the root cause but every time I simulated a transport
layer failure before I tried to remove the ib_srp kernel module I ran into
a deadlock (see also the call traces below). Inspection of the lsscsi
output and /sys/kernel/debug/block learned me that both queues involved in
the deadlock were stopped.

sysrq: SysRq : Show Blocked State
  task                        PC stack   pid father
kworker/11:3    D    0  2910      2 0x00000000
Workqueue: srp_remove srp_remove_work [ib_srp]
Call Trace:
 __schedule+0x3df/0xc10
 schedule+0x3d/0x90
 schedule_timeout+0x234/0x4b0
 io_schedule_timeout+0x1e/0x50
 wait_for_completion_io_timeout+0x118/0x180
 blk_execute_rq+0x8e/0xc0
 scsi_execute+0xe7/0x200
 sd_sync_cache+0x8a/0x170
 sd_shutdown+0x5f/0xe0
 sd_remove+0x63/0xc0
 device_release_driver_internal+0x13f/0x1e0
 device_release_driver+0x12/0x20
 bus_remove_device+0x114/0x190
 device_del+0x205/0x320
 __scsi_remove_device+0x132/0x140
 scsi_forget_host+0x60/0x70
 scsi_remove_host+0x71/0x110
 srp_remove_work+0x90/0x220 [ib_srp]
 process_one_work+0x20b/0x6a0
 worker_thread+0x4e/0x4a0
 kthread+0x113/0x150
 ret_from_fork+0x2e/0x40
kworker/4:3     D    0  2913      2 0x00000000
Workqueue: srp_remove srp_remove_work [ib_srp]
Call Trace:
 __schedule+0x3df/0xc10
 schedule+0x3d/0x90
 schedule_timeout+0x234/0x4b0
 io_schedule_timeout+0x1e/0x50
 wait_for_completion_io_timeout+0x118/0x180
 blk_execute_rq+0x8e/0xc0
 scsi_execute+0xe7/0x200
 sd_sync_cache+0x8a/0x170
 sd_shutdown+0x5f/0xe0
 sd_remove+0x63/0xc0
 device_release_driver_internal+0x13f/0x1e0
 device_release_driver+0x12/0x20
 bus_remove_device+0x114/0x190
 device_del+0x205/0x320
 __scsi_remove_device+0x132/0x140
 scsi_forget_host+0x60/0x70
 scsi_remove_host+0x71/0x110
 srp_remove_work+0x90/0x220 [ib_srp]
 process_one_work+0x20b/0x6a0
 worker_thread+0x4e/0x4a0
 kthread+0x113/0x150
 ret_from_fork+0x2e/0x40
modprobe        D    0  2916   2218 0x00000000
Call Trace:
 __schedule+0x3df/0xc10
 schedule+0x3d/0x90
 schedule_timeout+0x273/0x4b0
 wait_for_completion+0x108/0x170
 flush_workqueue+0x207/0x720
 srp_remove_one+0xbe/0x110 [ib_srp]
 ib_unregister_client+0x18f/0x200 [ib_core]
 srp_cleanup_module+0x10/0x618 [ib_srp]
 SyS_delete_module+0x198/0x1f0
 entry_SYSCALL_64_fastpath+0x18/0xad

Bart.

[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #2: 0001-Introduce-scsi_start_queue.patch --]
[-- Type: text/x-patch; name="0001-Introduce-scsi_start_queue.patch", Size: 2756 bytes --]

From c395ce2aaf6d8a644311f4c55dfa6aa560a93240 Mon Sep 17 00:00:00 2001
From: Bart Van Assche <bart.vanassche@sandisk.com>
Date: Tue, 28 Mar 2017 14:00:17 -0700
Subject: [PATCH 1/2] Introduce scsi_start_queue()

This patch does not change any functionality.

Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com>
Cc: Israel Rukshin <israelr@mellanox.com>
Cc: Max Gurtovoy <maxg@mellanox.com>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Benjamin Block <bblock@linux.vnet.ibm.com>
---
 drivers/scsi/scsi_lib.c  | 25 +++++++++++++++----------
 drivers/scsi/scsi_priv.h |  1 +
 2 files changed, 16 insertions(+), 10 deletions(-)

diff --git a/drivers/scsi/scsi_lib.c b/drivers/scsi/scsi_lib.c
index eecc005099b2..ffa6e61299a9 100644
--- a/drivers/scsi/scsi_lib.c
+++ b/drivers/scsi/scsi_lib.c
@@ -2987,6 +2987,20 @@ scsi_internal_device_block(struct scsi_device *sdev, bool wait)
 }
 EXPORT_SYMBOL_GPL(scsi_internal_device_block);
  
+void scsi_start_queue(struct scsi_device *sdev)
+{
+	struct request_queue *q = sdev->request_queue;
+	unsigned long flags;
+
+	if (q->mq_ops) {
+		blk_mq_start_stopped_hw_queues(q, false);
+	} else {
+		spin_lock_irqsave(q->queue_lock, flags);
+		blk_start_queue(q);
+		spin_unlock_irqrestore(q->queue_lock, flags);
+	}
+}
+
 /**
  * scsi_internal_device_unblock - resume a device after a block request
  * @sdev:	device to resume
@@ -3007,9 +3021,6 @@ int
 scsi_internal_device_unblock(struct scsi_device *sdev,
 			     enum scsi_device_state new_state)
 {
-	struct request_queue *q = sdev->request_queue; 
-	unsigned long flags;
-
 	/*
 	 * Try to transition the scsi device to SDEV_RUNNING or one of the
 	 * offlined states and goose the device queue if successful.
@@ -3027,13 +3038,7 @@ scsi_internal_device_unblock(struct scsi_device *sdev,
 		 sdev->sdev_state != SDEV_OFFLINE)
 		return -EINVAL;
 
-	if (q->mq_ops) {
-		blk_mq_start_stopped_hw_queues(q, false);
-	} else {
-		spin_lock_irqsave(q->queue_lock, flags);
-		blk_start_queue(q);
-		spin_unlock_irqrestore(q->queue_lock, flags);
-	}
+	scsi_start_queue(sdev);
 
 	return 0;
 }
diff --git a/drivers/scsi/scsi_priv.h b/drivers/scsi/scsi_priv.h
index f11bd102d6d5..c7629e31a75b 100644
--- a/drivers/scsi/scsi_priv.h
+++ b/drivers/scsi/scsi_priv.h
@@ -89,6 +89,7 @@ extern void scsi_run_host_queues(struct Scsi_Host *shost);
 extern void scsi_requeue_run_queue(struct work_struct *work);
 extern struct request_queue *scsi_alloc_queue(struct scsi_device *sdev);
 extern struct request_queue *scsi_mq_alloc_queue(struct scsi_device *sdev);
+extern void scsi_start_queue(struct scsi_device *sdev);
 extern int scsi_mq_setup_tags(struct Scsi_Host *shost);
 extern void scsi_mq_destroy_tags(struct Scsi_Host *shost);
 extern int scsi_init_queue(void);
-- 
2.12.2


[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #3: 0002-Make-__scsi_remove_device-go-straight-from-BLOCKED-t.patch --]
[-- Type: text/x-patch; name="0002-Make-__scsi_remove_device-go-straight-from-BLOCKED-t.patch", Size: 2731 bytes --]

From fa69092d22f4f58ede7d37e68148a4aa4615d2ab Mon Sep 17 00:00:00 2001
From: Bart Van Assche <bart.vanassche@sandisk.com>
Date: Tue, 18 Apr 2017 10:11:02 -0700
Subject: [PATCH 2/2] Make __scsi_remove_device go straight from BLOCKED to DEL

If a device is blocked, make __scsi_remove_device() cause it to
transition to the DEL state. This means that all the commands
issued in .shutdown() will error in the mid-layer, thus making
the removal proceed without being stopped.

This patch is a slightly modified version of a patch from James
Bottomley.

Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Cc: Israel Rukshin <israelr@mellanox.com>
Cc: Max Gurtovoy <maxg@mellanox.com>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Benjamin Block <bblock@linux.vnet.ibm.com>
---
 drivers/scsi/scsi_lib.c   |  2 +-
 drivers/scsi/scsi_sysfs.c | 19 ++++++++++++++++---
 2 files changed, 17 insertions(+), 4 deletions(-)

diff --git a/drivers/scsi/scsi_lib.c b/drivers/scsi/scsi_lib.c
index ffa6e61299a9..376cd1da102c 100644
--- a/drivers/scsi/scsi_lib.c
+++ b/drivers/scsi/scsi_lib.c
@@ -2611,7 +2611,6 @@ scsi_device_set_state(struct scsi_device *sdev, enum scsi_device_state state)
 		case SDEV_QUIESCE:
 		case SDEV_OFFLINE:
 		case SDEV_TRANSPORT_OFFLINE:
-		case SDEV_BLOCK:
 			break;
 		default:
 			goto illegal;
@@ -2625,6 +2624,7 @@ scsi_device_set_state(struct scsi_device *sdev, enum scsi_device_state state)
 		case SDEV_OFFLINE:
 		case SDEV_TRANSPORT_OFFLINE:
 		case SDEV_CANCEL:
+		case SDEV_BLOCK:
 		case SDEV_CREATED_BLOCK:
 			break;
 		default:
diff --git a/drivers/scsi/scsi_sysfs.c b/drivers/scsi/scsi_sysfs.c
index 82dfe07b1d47..5b03e58bdd67 100644
--- a/drivers/scsi/scsi_sysfs.c
+++ b/drivers/scsi/scsi_sysfs.c
@@ -1282,16 +1282,29 @@ void __scsi_remove_device(struct scsi_device *sdev)
 		return;
 
 	if (sdev->is_visible) {
-		if (scsi_device_set_state(sdev, SDEV_CANCEL) != 0)
-			return;
+		/*
+		 * If blocked, we go straight to DEL and restart the queue so
+		 * any commands issued during driver shutdown (like sync
+		 * cache) are errored immediately.
+		 */
+		if (scsi_device_set_state(sdev, SDEV_CANCEL) != 0) {
+			if (scsi_device_set_state(sdev, SDEV_DEL) != 0)
+				return;
+
+			scsi_start_queue(sdev);
+			sdev_printk(KERN_DEBUG, sdev,
+				    "Changed state from BLOCKED to DEL\n");
+		}
 
 		bsg_unregister_queue(sdev->request_queue);
 		device_unregister(&sdev->sdev_dev);
 		transport_remove_device(dev);
 		scsi_dh_remove_device(sdev);
 		device_del(dev);
-	} else
+	} else {
 		put_device(&sdev->sdev_dev);
+		scsi_start_queue(sdev);
+	}
 
 	/*
 	 * Stop accepting new requests and wait until all queuecommand() and
-- 
2.12.2

Re: [PATCH v3 3/4] sd: Make synchronize cache upon shutdown asynchronous

[Bart Van Assche]

On Thu, 2017-04-20 at 15:13 -0700, James Bottomley wrote:
> How is that possible?  Once the device goes into the CANCEL state, it
> no longer can be found by starget_for_each_device() because
> scsi_device_get() returns NULL ...

scsi_target_block() is not serialized against __scsi_remove_device(). I think
the following sequence of events can cause a queue to be stopped for a device
in the CANCEL state:
(a) scsi_target_block() triggers a call to scsi_get_device().
(b) __scsi_remove_device() is called from the context of another thread.
(c) __scsi_remove_device() changes the device state into SDEV_CANCEL.
(d) scsi_internal_device_block() calls blk_mq_stop_hw_queue().

Bart.

Re: [PATCH v3 3/4] sd: Make synchronize cache upon shutdown asynchronous

[James Bottomley]

On Thu, 2017-04-20 at 22:52 +0000, Bart Van Assche wrote:
> On Thu, 2017-04-20 at 15:13 -0700, James Bottomley wrote:
> > How is that possible?  Once the device goes into the CANCEL state,
> > it
> > no longer can be found by starget_for_each_device() because
> > scsi_device_get() returns NULL ...
> 
> scsi_target_block() is not serialized against __scsi_remove_device().
> I think
> the following sequence of events can cause a queue to be stopped for
> a device
> in the CANCEL state:
> (a) scsi_target_block() triggers a call to scsi_get_device().
> (b) __scsi_remove_device() is called from the context of another
> thread.
> (c) __scsi_remove_device() changes the device state into SDEV_CANCEL.
> (d) scsi_internal_device_block() calls blk_mq_stop_hw_queue().

OK, so the bug is that I didn't prevent the DEL->BLOCK transition which
allows us to go blocked after the new DEL if you were blocked before
when we reached cancel (corrected).  but looking at all of this, I
don't like the loose binding of block and queue stop, so this one makes
it more simplistic by deferring the queue stop until we try to execute
a blocked request.

In doing all of this, I folded in your start queue patch (I bet if we
fix this someone's going to want a backport to stable, so we shouldn't
make it difficult).

I also noticed the scsi_wait_for_queuecommand() should be event driven
(we're not supposed to do sleep driven condition checking) and there's
a spurious lock in scsi_request_fn_active() which means we could
eliminate the whole function.

However, the above is for another day.  This should work.

James

---

diff --git a/drivers/scsi/scsi_lib.c b/drivers/scsi/scsi_lib.c
index e5a2d590a104..a9ec35d9c91b 100644
--- a/drivers/scsi/scsi_lib.c
+++ b/drivers/scsi/scsi_lib.c
@@ -1250,6 +1250,12 @@ scsi_prep_state_check(struct scsi_device *sdev, struct request *req)
 			break;
 		case SDEV_BLOCK:
 		case SDEV_CREATED_BLOCK:
+			/* q lock is held only in the non-mq case */
+			if (req->q->mq_ops)
+				blk_mq_stop_hw_queues(req->q);
+			else
+				blk_stop_queue(req->q);
+
 			ret = BLKPREP_DEFER;
 			break;
 		case SDEV_QUIESCE:
@@ -2611,7 +2617,6 @@ scsi_device_set_state(struct scsi_device *sdev, enum scsi_device_state state)
 		case SDEV_QUIESCE:
 		case SDEV_OFFLINE:
 		case SDEV_TRANSPORT_OFFLINE:
-		case SDEV_BLOCK:
 			break;
 		default:
 			goto illegal;
@@ -2844,10 +2849,12 @@ static int scsi_request_fn_active(struct scsi_device *sdev)
  */
 static void scsi_wait_for_queuecommand(struct scsi_device *sdev)
 {
-	WARN_ON_ONCE(sdev->host->use_blk_mq);
-
-	while (scsi_request_fn_active(sdev))
-		msleep(20);
+	if (sdev->request_queue->mq_ops) {
+		synchronize_rcu();
+	} else {
+		while (scsi_request_fn_active(sdev))
+			msleep(20);
+	}
 }
 
 /**
@@ -2953,8 +2960,6 @@ EXPORT_SYMBOL(scsi_target_resume);
 int
 scsi_internal_device_block(struct scsi_device *sdev, bool wait)
 {
-	struct request_queue *q = sdev->request_queue;
-	unsigned long flags;
 	int err = 0;
 
 	err = scsi_device_set_state(sdev, SDEV_BLOCK);
@@ -2970,23 +2975,27 @@ scsi_internal_device_block(struct scsi_device *sdev, bool wait)
 	 * block layer from calling the midlayer with this device's
 	 * request queue. 
 	 */
+	if (wait)
+		scsi_wait_for_queuecommand(sdev);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(scsi_internal_device_block);
+
+void scsi_start_queue(struct scsi_device *sdev)
+{
+	struct request_queue *q = sdev->request_queue;
+	unsigned long flags;
+
 	if (q->mq_ops) {
-		if (wait)
-			blk_mq_quiesce_queue(q);
-		else
-			blk_mq_stop_hw_queues(q);
+		blk_mq_start_stopped_hw_queues(q, false);
 	} else {
 		spin_lock_irqsave(q->queue_lock, flags);
-		blk_stop_queue(q);
+		blk_start_queue(q);
 		spin_unlock_irqrestore(q->queue_lock, flags);
-		if (wait)
-			scsi_wait_for_queuecommand(sdev);
 	}
-
-	return 0;
 }
-EXPORT_SYMBOL_GPL(scsi_internal_device_block);
- 
+
 /**
  * scsi_internal_device_unblock - resume a device after a block request
  * @sdev:	device to resume
@@ -3007,9 +3016,6 @@ int
 scsi_internal_device_unblock(struct scsi_device *sdev,
 			     enum scsi_device_state new_state)
 {
-	struct request_queue *q = sdev->request_queue; 
-	unsigned long flags;
-
 	/*
 	 * Try to transition the scsi device to SDEV_RUNNING or one of the
 	 * offlined states and goose the device queue if successful.
@@ -3027,13 +3033,7 @@ scsi_internal_device_unblock(struct scsi_device *sdev,
 		 sdev->sdev_state != SDEV_OFFLINE)
 		return -EINVAL;
 
-	if (q->mq_ops) {
-		blk_mq_start_stopped_hw_queues(q, false);
-	} else {
-		spin_lock_irqsave(q->queue_lock, flags);
-		blk_start_queue(q);
-		spin_unlock_irqrestore(q->queue_lock, flags);
-	}
+	scsi_start_queue(sdev);
 
 	return 0;
 }
diff --git a/drivers/scsi/scsi_priv.h b/drivers/scsi/scsi_priv.h
index f11bd102d6d5..c7629e31a75b 100644
--- a/drivers/scsi/scsi_priv.h
+++ b/drivers/scsi/scsi_priv.h
@@ -89,6 +89,7 @@ extern void scsi_run_host_queues(struct Scsi_Host *shost);
 extern void scsi_requeue_run_queue(struct work_struct *work);
 extern struct request_queue *scsi_alloc_queue(struct scsi_device *sdev);
 extern struct request_queue *scsi_mq_alloc_queue(struct scsi_device *sdev);
+extern void scsi_start_queue(struct scsi_device *sdev);
 extern int scsi_mq_setup_tags(struct Scsi_Host *shost);
 extern void scsi_mq_destroy_tags(struct Scsi_Host *shost);
 extern int scsi_init_queue(void);
diff --git a/drivers/scsi/scsi_sysfs.c b/drivers/scsi/scsi_sysfs.c
index 82dfe07b1d47..5e826801c84c 100644
--- a/drivers/scsi/scsi_sysfs.c
+++ b/drivers/scsi/scsi_sysfs.c
@@ -1282,8 +1282,17 @@ void __scsi_remove_device(struct scsi_device *sdev)
 		return;
 
 	if (sdev->is_visible) {
-		if (scsi_device_set_state(sdev, SDEV_CANCEL) != 0)
-			return;
+		/*
+		 * If blocked, we go straight to DEL so any commands
+		 * issued during the driver shutdown (like sync cache)
+		 * are errored
+		 */
+		if (scsi_device_set_state(sdev, SDEV_CANCEL) != 0) {
+			if (scsi_device_set_state(sdev, SDEV_DEL) != 0)
+				return;
+
+			scsi_start_queue(sdev);
+		}
 
 		bsg_unregister_queue(sdev->request_queue);
 		device_unregister(&sdev->sdev_dev);

[lkp-robot] [sd] ab1218235c: INFO:possible_recursive_locking_detected

[kernel test robot]

[-- Attachment #1: Type: text/plain, Size: 6647 bytes --]


FYI, we noticed the following commit:

commit: ab1218235c09d0fabdea31cbd4f099e7cabccb27 ("sd: Make synchronize cache upon shutdown asynchronous")
url: https://github.com/0day-ci/linux/commits/Bart-Van-Assche/Avoid-that-__scsi_remove_device-hangs/20170418-013958
base: https://git.kernel.org/cgit/linux/kernel/git/jejb/scsi.git for-next

in testcase: boot

on test machine: qemu-system-x86_64 -enable-kvm -m 420M

caused below changes (please refer to attached dmesg/kmsg for entire log/backtrace):


+-----------------------------------------------------------------------------------+------------+------------+
|                                                                                   | b2ba13eb79 | ab1218235c |
+-----------------------------------------------------------------------------------+------------+------------+
| boot_successes                                                                    | 10         | 0          |
| boot_failures                                                                     | 10         | 45         |
| INFO:task_blocked_for_more_than#seconds                                           | 10         | 37         |
| calltrace:debug_show_all_locks                                                    | 6          | 32         |
| calltrace:stress_inorder_work                                                     | 1          | 9          |
| INFO:possible_recursive_locking_detected                                          | 0          | 45         |
| BUG:kernel_hang_in_test_stage                                                     | 0          | 45         |
| INFO:rcu_preempt_detected_stalls_on_CPUs/tasks                                    | 0          | 1          |
| EIP:queued_spin_lock_slowpath                                                     | 0          | 1          |
| INFO:rcu_sched_detected_expedited_stalls_on_CPUs/tasks:{#-...}#jiffies_s:#root:#/ | 0          | 1          |
| INFO:lockdep_is_turned_off                                                        | 0          | 1          |
| calltrace:stress_reorder_work                                                     | 0          | 4          |
| calltrace:pick_next_task_fair                                                     | 0          | 2          |
+-----------------------------------------------------------------------------------+------------+------------+



[  185.305149] [ INFO: possible recursive locking detected ]
[  185.306075] 4.11.0-rc2-00217-gab12182 #1 Not tainted
[  185.306928] ---------------------------------------------
[  185.307854] ksoftirqd/0/6 is trying to acquire lock:
[  185.308712]  (&(&q->__queue_lock)->rlock){..-...}, at: [<b1453433>] blk_put_request+0x33/0x50
[  185.310170] 
[  185.310170] but task is already holding lock:
[  185.311168]  (&(&q->__queue_lock)->rlock){..-...}, at: [<b1616533>] scsi_end_request+0x103/0x1b0
[  185.312666] 
[  185.312666] other info that might help us debug this:
[  185.313777]  Possible unsafe locking scenario:
[  185.313777] 
[  185.314791]        CPU0
[  185.315221]        ----
[  185.315654]   lock(&(&q->__queue_lock)->rlock);
[  185.316432]   lock(&(&q->__queue_lock)->rlock);
[  185.317206] 
[  185.317206]  *** DEADLOCK ***
[  185.317206] 
[  185.318216]  May be due to missing lock nesting notation
[  185.318216] 
[  185.319376] 1 lock held by ksoftirqd/0/6:
[  185.320072]  #0:  (&(&q->__queue_lock)->rlock){..-...}, at: [<b1616533>] scsi_end_request+0x103/0x1b0
[  185.321635] 
[  185.321635] stack backtrace:
[  185.322381] CPU: 0 PID: 6 Comm: ksoftirqd/0 Not tainted 4.11.0-rc2-00217-gab12182 #1
[  185.323698] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.9.3-20161025_171302-gandalf 04/01/2014
[  185.325427] Call Trace:
[  185.325859]  dump_stack+0x76/0xa9
[  185.326440]  __lock_acquire+0x10d2/0x1260
[  185.327132]  lock_acquire+0x8c/0x1f0
[  185.327757]  ? blk_put_request+0x33/0x50
[  185.328455]  _raw_spin_lock_irqsave+0x39/0x70
[  185.329205]  ? blk_put_request+0x33/0x50
[  185.329890]  blk_put_request+0x33/0x50
[  185.330549]  sd_sync_cache_done+0x3e/0x70
[  185.331240]  blk_finish_request+0x60/0x120
[  185.331948]  scsi_end_request+0x10f/0x1b0
[  185.332644]  ? kvm_sched_clock_read+0x9/0x20
[  185.333380]  scsi_io_completion+0x1ac/0x5a0
[  185.334109]  scsi_finish_command+0xa6/0xe0
[  185.334825]  scsi_softirq_done+0xe5/0x100
[  185.335527]  blk_done_softirq+0x7b/0x90
[  185.336190]  __do_softirq+0x190/0x4f0
[  185.336830]  run_ksoftirqd+0x1d/0x70
[  185.337455]  smpboot_thread_fn+0x11a/0x230
[  185.338161]  kthread+0xd9/0x110
[  185.338715]  ? sort_range+0x20/0x20
[  185.339321]  ? __kthread_create_on_node+0x190/0x190
[  185.340170]  ret_from_fork+0x21/0x30

Elapsed time: 1520
BUG: kernel hang in test stage

initrds=(
	/osimage/openwrt/openwrt-i386-2016-03-16.cgz
	/lkp/scheduled/vm-lkp-st01-openwrt-ia32-1/boot-1-openwrt-i386-2016-03-16.cgz-ab1218235c09d0fabdea31cbd4f099e7cabccb27-20170423-6680-3gpgeq-0.cgz
	/lkp/lkp/lkp-i386.cgz
)

cat "${initrds[@]}" > /fs/sda3/initrd-vm-lkp-st01-openwrt-ia32-1

kvm=(
	qemu-system-x86_64
	-enable-kvm
	-kernel /pkg/linux/i386-randconfig-b0-04180616/gcc-5/ab1218235c09d0fabdea31cbd4f099e7cabccb27/vmlinuz-4.11.0-rc2-00217-gab12182
	-initrd /fs/sda3/initrd-vm-lkp-st01-openwrt-ia32-1
	-m 420
	-smp 1
	-device e1000,netdev=net0
	-netdev user,id=net0
	-boot order=nc
	-no-reboot
	-watchdog i6300esb
	-watchdog-action debug
	-rtc base=localtime
	-pidfile /dev/shm/kboot/pid-vm-lkp-st01-openwrt-ia32-1
	-serial file:/dev/shm/kboot/vm-lkp-st01-openwrt-ia32-1/serial
	-serial file:/dev/shm/kboot/vm-lkp-st01-openwrt-ia32-1/kmsg
	-daemonize
	-display none
	-monitor null
)

append=(
	ip=::::vm-lkp-st01-openwrt-ia32-1::dhcp
	root=/dev/ram0
	user=lkp
	job=/lkp/scheduled/vm-lkp-st01-openwrt-ia32-1/boot-1-openwrt-i386-2016-03-16.cgz-ab1218235c09d0fabdea31cbd4f099e7cabccb27-20170423-6680-3gpgeq-0.yaml
	ARCH=i386
	kconfig=i386-randconfig-b0-04180616
	branch=linux-devel/devel-spot-201704180508
	commit=ab1218235c09d0fabdea31cbd4f099e7cabccb27
	BOOT_IMAGE=/pkg/linux/i386-randconfig-b0-04180616/gcc-5/ab1218235c09d0fabdea31cbd4f099e7cabccb27/vmlinuz-4.11.0-rc2-00217-gab12182
	max_uptime=600
	RESULT_ROOT=/result/boot/1/vm-lkp-st01-openwrt-ia32/openwrt-i386-2016-03-16.cgz/i386-randconfig-b0-04180616/gcc-5/ab1218235c09d0fabdea31cbd4f099e7cabccb27/0
	LKP_SERVER=inn
	debug
	apic=debug
	sysrq_always_enabled
	rcupdate.rcu_cpu_stall_timeout=100


To reproduce:

        git clone https://github.com/01org/lkp-tests.git
        cd lkp-tests
        bin/lkp qemu -k <bzImage> job-script  # job-script is attached in this email



Thanks,
Xiaolong

[-- Attachment #2: config-4.11.0-rc2-00217-gab12182 --]
[-- Type: text/plain, Size: 104353 bytes --]

#
# Automatically generated file; DO NOT EDIT.
# Linux/i386 4.11.0-rc2 Kernel Configuration
#
# CONFIG_64BIT is not set
CONFIG_X86_32=y
CONFIG_X86=y
CONFIG_INSTRUCTION_DECODER=y
CONFIG_OUTPUT_FORMAT="elf32-i386"
CONFIG_ARCH_DEFCONFIG="arch/x86/configs/i386_defconfig"
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_MMU=y
CONFIG_ARCH_MMAP_RND_BITS_MIN=8
CONFIG_ARCH_MMAP_RND_BITS_MAX=16
CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MIN=8
CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MAX=16
CONFIG_NEED_SG_DMA_LENGTH=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_ARCH_HAS_CPU_RELAX=y
CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y
CONFIG_HAVE_SETUP_PER_CPU_AREA=y
CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK=y
CONFIG_NEED_PER_CPU_PAGE_FIRST_CHUNK=y
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_ARCH_WANT_HUGE_PMD_SHARE=y
CONFIG_ARCH_WANT_GENERAL_HUGETLB=y
CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_X86_32_SMP=y
CONFIG_X86_32_LAZY_GS=y
CONFIG_ARCH_SUPPORTS_UPROBES=y
CONFIG_FIX_EARLYCON_MEM=y
CONFIG_PGTABLE_LEVELS=2
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
CONFIG_IRQ_WORK=y
CONFIG_BUILDTIME_EXTABLE_SORT=y
CONFIG_THREAD_INFO_IN_TASK=y

#
# General setup
#
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_CROSS_COMPILE=""
# CONFIG_COMPILE_TEST is not set
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
CONFIG_HAVE_KERNEL_GZIP=y
CONFIG_HAVE_KERNEL_BZIP2=y
CONFIG_HAVE_KERNEL_LZMA=y
CONFIG_HAVE_KERNEL_XZ=y
CONFIG_HAVE_KERNEL_LZO=y
CONFIG_HAVE_KERNEL_LZ4=y
# CONFIG_KERNEL_GZIP is not set
# CONFIG_KERNEL_BZIP2 is not set
# CONFIG_KERNEL_LZMA is not set
# CONFIG_KERNEL_XZ is not set
CONFIG_KERNEL_LZO=y
# CONFIG_KERNEL_LZ4 is not set
CONFIG_DEFAULT_HOSTNAME="(none)"
# CONFIG_SWAP is not set
# CONFIG_SYSVIPC is not set
# CONFIG_POSIX_MQUEUE is not set
CONFIG_CROSS_MEMORY_ATTACH=y
CONFIG_FHANDLE=y
CONFIG_USELIB=y
# CONFIG_AUDIT is not set
CONFIG_HAVE_ARCH_AUDITSYSCALL=y

#
# IRQ subsystem
#
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_IRQ_SHOW=y
CONFIG_GENERIC_PENDING_IRQ=y
CONFIG_GENERIC_IRQ_CHIP=y
CONFIG_IRQ_DOMAIN=y
CONFIG_IRQ_DOMAIN_HIERARCHY=y
# CONFIG_IRQ_DOMAIN_DEBUG is not set
CONFIG_IRQ_FORCED_THREADING=y
CONFIG_SPARSE_IRQ=y
CONFIG_CLOCKSOURCE_WATCHDOG=y
CONFIG_ARCH_CLOCKSOURCE_DATA=y
CONFIG_CLOCKSOURCE_VALIDATE_LAST_CYCLE=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
CONFIG_GENERIC_CLOCKEVENTS_MIN_ADJUST=y
CONFIG_GENERIC_CMOS_UPDATE=y

#
# Timers subsystem
#
CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ_COMMON=y
# CONFIG_HZ_PERIODIC is not set
CONFIG_NO_HZ_IDLE=y
CONFIG_NO_HZ=y
# CONFIG_HIGH_RES_TIMERS is not set

#
# CPU/Task time and stats accounting
#
CONFIG_TICK_CPU_ACCOUNTING=y
CONFIG_IRQ_TIME_ACCOUNTING=y
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set

#
# RCU Subsystem
#
CONFIG_PREEMPT_RCU=y
# CONFIG_RCU_EXPERT is not set
CONFIG_SRCU=y
CONFIG_TASKS_RCU=y
CONFIG_RCU_STALL_COMMON=y
# CONFIG_TREE_RCU_TRACE is not set
CONFIG_BUILD_BIN2C=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=17
CONFIG_LOG_CPU_MAX_BUF_SHIFT=12
CONFIG_PRINTK_SAFE_LOG_BUF_SHIFT=13
CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y
CONFIG_ARCH_WANT_BATCHED_UNMAP_TLB_FLUSH=y
CONFIG_CGROUPS=y
CONFIG_PAGE_COUNTER=y
CONFIG_MEMCG=y
# CONFIG_BLK_CGROUP is not set
CONFIG_CGROUP_SCHED=y
CONFIG_FAIR_GROUP_SCHED=y
# CONFIG_CFS_BANDWIDTH is not set
CONFIG_RT_GROUP_SCHED=y
# CONFIG_CGROUP_PIDS is not set
CONFIG_CGROUP_RDMA=y
# CONFIG_CGROUP_FREEZER is not set
# CONFIG_CPUSETS is not set
# CONFIG_CGROUP_DEVICE is not set
# CONFIG_CGROUP_CPUACCT is not set
# CONFIG_CGROUP_PERF is not set
CONFIG_CGROUP_BPF=y
CONFIG_CGROUP_DEBUG=y
CONFIG_SOCK_CGROUP_DATA=y
CONFIG_CHECKPOINT_RESTORE=y
# CONFIG_NAMESPACES is not set
# CONFIG_SCHED_AUTOGROUP is not set
# CONFIG_SYSFS_DEPRECATED is not set
CONFIG_RELAY=y
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_RD_GZIP=y
CONFIG_RD_BZIP2=y
CONFIG_RD_LZMA=y
CONFIG_RD_XZ=y
CONFIG_RD_LZO=y
CONFIG_RD_LZ4=y
CONFIG_INITRAMFS_COMPRESSION=".gz"
CONFIG_CC_OPTIMIZE_FOR_PERFORMANCE=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
CONFIG_ANON_INODES=y
CONFIG_HAVE_UID16=y
CONFIG_SYSCTL_EXCEPTION_TRACE=y
CONFIG_HAVE_PCSPKR_PLATFORM=y
CONFIG_BPF=y
CONFIG_EXPERT=y
CONFIG_UID16=y
CONFIG_MULTIUSER=y
CONFIG_SGETMASK_SYSCALL=y
# CONFIG_SYSFS_SYSCALL is not set
# CONFIG_SYSCTL_SYSCALL is not set
CONFIG_POSIX_TIMERS=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
# CONFIG_KALLSYMS_ABSOLUTE_PERCPU is not set
CONFIG_KALLSYMS_BASE_RELATIVE=y
CONFIG_PRINTK=y
CONFIG_PRINTK_NMI=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_PCSPKR_PLATFORM=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_BPF_SYSCALL=y
CONFIG_SHMEM=y
# CONFIG_AIO is not set
CONFIG_ADVISE_SYSCALLS=y
# CONFIG_USERFAULTFD is not set
CONFIG_PCI_QUIRKS=y
CONFIG_MEMBARRIER=y
# CONFIG_EMBEDDED is not set
CONFIG_HAVE_PERF_EVENTS=y
# CONFIG_PC104 is not set

#
# Kernel Performance Events And Counters
#
CONFIG_PERF_EVENTS=y
# CONFIG_DEBUG_PERF_USE_VMALLOC is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLUB_DEBUG=y
# CONFIG_SLUB_MEMCG_SYSFS_ON is not set
CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
CONFIG_SLAB_FREELIST_RANDOM=y
CONFIG_SLUB_CPU_PARTIAL=y
# CONFIG_SYSTEM_DATA_VERIFICATION is not set
# CONFIG_PROFILING is not set
CONFIG_TRACEPOINTS=y
CONFIG_KEXEC_CORE=y
CONFIG_HAVE_OPROFILE=y
CONFIG_OPROFILE_NMI_TIMER=y
# CONFIG_JUMP_LABEL is not set
# CONFIG_UPROBES is not set
# CONFIG_HAVE_64BIT_ALIGNED_ACCESS is not set
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_ARCH_USE_BUILTIN_BSWAP=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_OPTPROBES=y
CONFIG_HAVE_KPROBES_ON_FTRACE=y
CONFIG_HAVE_NMI=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_DMA_CONTIGUOUS=y
CONFIG_GENERIC_SMP_IDLE_THREAD=y
CONFIG_ARCH_HAS_SET_MEMORY=y
CONFIG_ARCH_WANTS_DYNAMIC_TASK_STRUCT=y
CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
CONFIG_HAVE_CLK=y
CONFIG_HAVE_DMA_API_DEBUG=y
CONFIG_HAVE_HW_BREAKPOINT=y
CONFIG_HAVE_MIXED_BREAKPOINTS_REGS=y
CONFIG_HAVE_USER_RETURN_NOTIFIER=y
CONFIG_HAVE_PERF_EVENTS_NMI=y
CONFIG_HAVE_PERF_REGS=y
CONFIG_HAVE_PERF_USER_STACK_DUMP=y
CONFIG_HAVE_ARCH_JUMP_LABEL=y
CONFIG_ARCH_HAVE_NMI_SAFE_CMPXCHG=y
CONFIG_HAVE_ALIGNED_STRUCT_PAGE=y
CONFIG_HAVE_CMPXCHG_LOCAL=y
CONFIG_HAVE_CMPXCHG_DOUBLE=y
CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
CONFIG_SECCOMP_FILTER=y
CONFIG_HAVE_GCC_PLUGINS=y
# CONFIG_GCC_PLUGINS is not set
CONFIG_HAVE_CC_STACKPROTECTOR=y
# CONFIG_CC_STACKPROTECTOR is not set
CONFIG_CC_STACKPROTECTOR_NONE=y
# CONFIG_CC_STACKPROTECTOR_REGULAR is not set
# CONFIG_CC_STACKPROTECTOR_STRONG is not set
CONFIG_HAVE_ARCH_WITHIN_STACK_FRAMES=y
CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
CONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE=y
CONFIG_MODULES_USE_ELF_REL=y
CONFIG_ARCH_HAS_ELF_RANDOMIZE=y
CONFIG_HAVE_ARCH_MMAP_RND_BITS=y
CONFIG_HAVE_EXIT_THREAD=y
CONFIG_ARCH_MMAP_RND_BITS=8
CONFIG_HAVE_COPY_THREAD_TLS=y
# CONFIG_HAVE_ARCH_HASH is not set
CONFIG_ISA_BUS_API=y
CONFIG_CLONE_BACKWARDS=y
CONFIG_OLD_SIGSUSPEND3=y
CONFIG_OLD_SIGACTION=y
# CONFIG_CPU_NO_EFFICIENT_FFS is not set
# CONFIG_HAVE_ARCH_VMAP_STACK is not set
# CONFIG_ARCH_OPTIONAL_KERNEL_RWX is not set
# CONFIG_ARCH_OPTIONAL_KERNEL_RWX_DEFAULT is not set
CONFIG_ARCH_HAS_STRICT_KERNEL_RWX=y
CONFIG_STRICT_KERNEL_RWX=y
CONFIG_ARCH_HAS_STRICT_MODULE_RWX=y

#
# GCOV-based kernel profiling
#
# CONFIG_GCOV_KERNEL is not set
CONFIG_ARCH_HAS_GCOV_PROFILE_ALL=y
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
CONFIG_BASE_SMALL=0
# CONFIG_MODULES is not set
CONFIG_MODULES_TREE_LOOKUP=y
CONFIG_BLOCK=y
CONFIG_LBDAF=y
CONFIG_BLK_SCSI_REQUEST=y
CONFIG_BLK_DEV_BSG=y
# CONFIG_BLK_DEV_BSGLIB is not set
CONFIG_BLK_DEV_INTEGRITY=y
# CONFIG_BLK_DEV_ZONED is not set
CONFIG_BLK_CMDLINE_PARSER=y
# CONFIG_BLK_WBT is not set
CONFIG_BLK_DEBUG_FS=y
# CONFIG_BLK_SED_OPAL is not set

#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
# CONFIG_ACORN_PARTITION is not set
# CONFIG_AIX_PARTITION is not set
CONFIG_OSF_PARTITION=y
# CONFIG_AMIGA_PARTITION is not set
CONFIG_ATARI_PARTITION=y
CONFIG_MAC_PARTITION=y
CONFIG_MSDOS_PARTITION=y
CONFIG_BSD_DISKLABEL=y
# CONFIG_MINIX_SUBPARTITION is not set
# CONFIG_SOLARIS_X86_PARTITION is not set
CONFIG_UNIXWARE_DISKLABEL=y
# CONFIG_LDM_PARTITION is not set
# CONFIG_SGI_PARTITION is not set
CONFIG_ULTRIX_PARTITION=y
CONFIG_SUN_PARTITION=y
# CONFIG_KARMA_PARTITION is not set
# CONFIG_EFI_PARTITION is not set
# CONFIG_SYSV68_PARTITION is not set
CONFIG_CMDLINE_PARTITION=y
CONFIG_BLK_MQ_PCI=y

#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_DEADLINE=y
# CONFIG_IOSCHED_CFQ is not set
# CONFIG_DEFAULT_DEADLINE is not set
CONFIG_DEFAULT_NOOP=y
CONFIG_DEFAULT_IOSCHED="noop"
CONFIG_MQ_IOSCHED_DEADLINE=y
CONFIG_PADATA=y
CONFIG_ASN1=y
CONFIG_UNINLINE_SPIN_UNLOCK=y
CONFIG_ARCH_SUPPORTS_ATOMIC_RMW=y
CONFIG_MUTEX_SPIN_ON_OWNER=y
CONFIG_RWSEM_SPIN_ON_OWNER=y
CONFIG_LOCK_SPIN_ON_OWNER=y
CONFIG_ARCH_USE_QUEUED_SPINLOCKS=y
CONFIG_QUEUED_SPINLOCKS=y
CONFIG_ARCH_USE_QUEUED_RWLOCKS=y
CONFIG_QUEUED_RWLOCKS=y
# CONFIG_FREEZER is not set

#
# Processor type and features
#
CONFIG_ZONE_DMA=y
CONFIG_SMP=y
CONFIG_X86_FEATURE_NAMES=y
CONFIG_X86_FAST_FEATURE_TESTS=y
CONFIG_X86_MPPARSE=y
CONFIG_X86_BIGSMP=y
# CONFIG_GOLDFISH is not set
CONFIG_INTEL_RDT_A=y
CONFIG_X86_EXTENDED_PLATFORM=y
# CONFIG_X86_GOLDFISH is not set
# CONFIG_X86_INTEL_MID is not set
# CONFIG_X86_INTEL_QUARK is not set
# CONFIG_X86_INTEL_LPSS is not set
# CONFIG_X86_AMD_PLATFORM_DEVICE is not set
CONFIG_IOSF_MBI=y
CONFIG_IOSF_MBI_DEBUG=y
CONFIG_X86_RDC321X=y
CONFIG_X86_32_NON_STANDARD=y
CONFIG_X86_SUPPORTS_MEMORY_FAILURE=y
# CONFIG_STA2X11 is not set
# CONFIG_X86_32_IRIS is not set
# CONFIG_SCHED_OMIT_FRAME_POINTER is not set
CONFIG_HYPERVISOR_GUEST=y
CONFIG_PARAVIRT=y
# CONFIG_PARAVIRT_DEBUG is not set
# CONFIG_PARAVIRT_SPINLOCKS is not set
CONFIG_KVM_GUEST=y
# CONFIG_KVM_DEBUG_FS is not set
# CONFIG_LGUEST_GUEST is not set
# CONFIG_PARAVIRT_TIME_ACCOUNTING is not set
CONFIG_PARAVIRT_CLOCK=y
CONFIG_NO_BOOTMEM=y
# CONFIG_M486 is not set
# CONFIG_M586 is not set
# CONFIG_M586TSC is not set
# CONFIG_M586MMX is not set
# CONFIG_M686 is not set
# CONFIG_MPENTIUMII is not set
# CONFIG_MPENTIUMIII is not set
# CONFIG_MPENTIUMM is not set
# CONFIG_MPENTIUM4 is not set
# CONFIG_MK6 is not set
# CONFIG_MK7 is not set
# CONFIG_MK8 is not set
# CONFIG_MCRUSOE is not set
# CONFIG_MEFFICEON is not set
# CONFIG_MWINCHIPC6 is not set
CONFIG_MWINCHIP3D=y
# CONFIG_MELAN is not set
# CONFIG_MGEODEGX1 is not set
# CONFIG_MGEODE_LX is not set
# CONFIG_MCYRIXIII is not set
# CONFIG_MVIAC3_2 is not set
# CONFIG_MVIAC7 is not set
# CONFIG_MCORE2 is not set
# CONFIG_MATOM is not set
CONFIG_X86_GENERIC=y
CONFIG_X86_INTERNODE_CACHE_SHIFT=6
CONFIG_X86_L1_CACHE_SHIFT=6
CONFIG_X86_ALIGNMENT_16=y
CONFIG_X86_INTEL_USERCOPY=y
CONFIG_X86_USE_PPRO_CHECKSUM=y
CONFIG_X86_TSC=y
CONFIG_X86_MINIMUM_CPU_FAMILY=4
CONFIG_PROCESSOR_SELECT=y
CONFIG_CPU_SUP_INTEL=y
CONFIG_CPU_SUP_CYRIX_32=y
# CONFIG_CPU_SUP_AMD is not set
# CONFIG_CPU_SUP_CENTAUR is not set
# CONFIG_CPU_SUP_TRANSMETA_32 is not set
CONFIG_CPU_SUP_UMC_32=y
CONFIG_HPET_TIMER=y
CONFIG_DMI=y
CONFIG_NR_CPUS=32
CONFIG_SCHED_SMT=y
# CONFIG_SCHED_MC is not set
# CONFIG_PREEMPT_NONE is not set
# CONFIG_PREEMPT_VOLUNTARY is not set
CONFIG_PREEMPT=y
CONFIG_PREEMPT_COUNT=y
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
# CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS is not set
CONFIG_X86_MCE=y
# CONFIG_X86_MCE_INTEL is not set
CONFIG_X86_ANCIENT_MCE=y
# CONFIG_X86_MCE_INJECT is not set

#
# Performance monitoring
#
CONFIG_PERF_EVENTS_INTEL_UNCORE=y
CONFIG_PERF_EVENTS_INTEL_RAPL=y
CONFIG_PERF_EVENTS_INTEL_CSTATE=y
# CONFIG_X86_LEGACY_VM86 is not set
# CONFIG_VM86 is not set
CONFIG_TOSHIBA=y
CONFIG_I8K=y
CONFIG_X86_REBOOTFIXUPS=y
CONFIG_MICROCODE=y
CONFIG_MICROCODE_INTEL=y
# CONFIG_MICROCODE_AMD is not set
CONFIG_MICROCODE_OLD_INTERFACE=y
CONFIG_X86_MSR=y
CONFIG_X86_CPUID=y
CONFIG_NOHIGHMEM=y
# CONFIG_HIGHMEM4G is not set
# CONFIG_HIGHMEM64G is not set
# CONFIG_VMSPLIT_3G is not set
CONFIG_VMSPLIT_3G_OPT=y
# CONFIG_VMSPLIT_2G is not set
# CONFIG_VMSPLIT_2G_OPT is not set
# CONFIG_VMSPLIT_1G is not set
CONFIG_PAGE_OFFSET=0xB0000000
# CONFIG_X86_PAE is not set
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_ILLEGAL_POINTER_VALUE=0
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
CONFIG_SPARSEMEM_STATIC=y
CONFIG_HAVE_MEMBLOCK=y
CONFIG_HAVE_MEMBLOCK_NODE_MAP=y
CONFIG_ARCH_DISCARD_MEMBLOCK=y
# CONFIG_HAVE_BOOTMEM_INFO_NODE is not set
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_COMPACTION=y
CONFIG_MIGRATION=y
# CONFIG_PHYS_ADDR_T_64BIT is not set
# CONFIG_BOUNCE is not set
CONFIG_VIRT_TO_BUS=y
# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_ARCH_SUPPORTS_MEMORY_FAILURE=y
# CONFIG_MEMORY_FAILURE is not set
CONFIG_TRANSPARENT_HUGEPAGE=y
# CONFIG_TRANSPARENT_HUGEPAGE_ALWAYS is not set
CONFIG_TRANSPARENT_HUGEPAGE_MADVISE=y
CONFIG_TRANSPARENT_HUGE_PAGECACHE=y
CONFIG_CLEANCACHE=y
# CONFIG_CMA is not set
CONFIG_ZPOOL=y
CONFIG_ZBUD=y
# CONFIG_Z3FOLD is not set
# CONFIG_ZSMALLOC is not set
CONFIG_GENERIC_EARLY_IOREMAP=y
CONFIG_ARCH_SUPPORTS_DEFERRED_STRUCT_PAGE_INIT=y
CONFIG_IDLE_PAGE_TRACKING=y
CONFIG_X86_CHECK_BIOS_CORRUPTION=y
CONFIG_X86_BOOTPARAM_MEMORY_CORRUPTION_CHECK=y
CONFIG_X86_RESERVE_LOW=64
# CONFIG_MTRR is not set
CONFIG_ARCH_RANDOM=y
CONFIG_X86_SMAP=y
# CONFIG_X86_INTEL_MPX is not set
# CONFIG_EFI is not set
CONFIG_SECCOMP=y
CONFIG_HZ_100=y
# CONFIG_HZ_250 is not set
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=100
# CONFIG_SCHED_HRTICK is not set
CONFIG_KEXEC=y
CONFIG_PHYSICAL_START=0x1000000
# CONFIG_RELOCATABLE is not set
CONFIG_PHYSICAL_ALIGN=0x200000
# CONFIG_HOTPLUG_CPU is not set
CONFIG_COMPAT_VDSO=y
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_MODIFY_LDT_SYSCALL is not set

#
# Power management and ACPI options
#
# CONFIG_SUSPEND is not set
# CONFIG_PM is not set
CONFIG_ACPI=y
CONFIG_ACPI_LEGACY_TABLES_LOOKUP=y
CONFIG_ARCH_MIGHT_HAVE_ACPI_PDC=y
CONFIG_ACPI_SYSTEM_POWER_STATES_SUPPORT=y
# CONFIG_ACPI_DEBUGGER is not set
# CONFIG_ACPI_PROCFS_POWER is not set
CONFIG_ACPI_REV_OVERRIDE_POSSIBLE=y
# CONFIG_ACPI_EC_DEBUGFS is not set
CONFIG_ACPI_AC=y
CONFIG_ACPI_BATTERY=y
CONFIG_ACPI_BUTTON=y
# CONFIG_ACPI_VIDEO is not set
CONFIG_ACPI_FAN=y
# CONFIG_ACPI_DOCK is not set
CONFIG_ACPI_CPU_FREQ_PSS=y
CONFIG_ACPI_PROCESSOR_CSTATE=y
CONFIG_ACPI_PROCESSOR_IDLE=y
CONFIG_ACPI_PROCESSOR=y
# CONFIG_ACPI_PROCESSOR_AGGREGATOR is not set
CONFIG_ACPI_THERMAL=y
CONFIG_ACPI_CUSTOM_DSDT_FILE=""
# CONFIG_ACPI_CUSTOM_DSDT is not set
CONFIG_ARCH_HAS_ACPI_TABLE_UPGRADE=y
CONFIG_ACPI_TABLE_UPGRADE=y
# CONFIG_ACPI_DEBUG is not set
# CONFIG_ACPI_PCI_SLOT is not set
CONFIG_X86_PM_TIMER=y
# CONFIG_ACPI_CONTAINER is not set
CONFIG_ACPI_HOTPLUG_IOAPIC=y
# CONFIG_ACPI_SBS is not set
# CONFIG_ACPI_HED is not set
# CONFIG_ACPI_CUSTOM_METHOD is not set
# CONFIG_ACPI_REDUCED_HARDWARE_ONLY is not set
CONFIG_HAVE_ACPI_APEI=y
CONFIG_HAVE_ACPI_APEI_NMI=y
# CONFIG_ACPI_APEI is not set
# CONFIG_DPTF_POWER is not set
# CONFIG_ACPI_EXTLOG is not set
# CONFIG_PMIC_OPREGION is not set
# CONFIG_ACPI_CONFIGFS is not set
CONFIG_SFI=y

#
# CPU Frequency scaling
#
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_GOV_ATTR_SET=y
CONFIG_CPU_FREQ_GOV_COMMON=y
# CONFIG_CPU_FREQ_STAT is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_SCHEDUTIL is not set
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
CONFIG_CPU_FREQ_GOV_POWERSAVE=y
CONFIG_CPU_FREQ_GOV_USERSPACE=y
CONFIG_CPU_FREQ_GOV_ONDEMAND=y
CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y
# CONFIG_CPU_FREQ_GOV_SCHEDUTIL is not set

#
# CPU frequency scaling drivers
#
# CONFIG_CPUFREQ_DT is not set
CONFIG_X86_INTEL_PSTATE=y
# CONFIG_X86_PCC_CPUFREQ is not set
# CONFIG_X86_ACPI_CPUFREQ is not set
CONFIG_X86_POWERNOW_K6=y
CONFIG_X86_POWERNOW_K7=y
CONFIG_X86_POWERNOW_K7_ACPI=y
# CONFIG_X86_GX_SUSPMOD is not set
CONFIG_X86_SPEEDSTEP_CENTRINO=y
CONFIG_X86_SPEEDSTEP_CENTRINO_TABLE=y
CONFIG_X86_SPEEDSTEP_ICH=y
CONFIG_X86_SPEEDSTEP_SMI=y
# CONFIG_X86_P4_CLOCKMOD is not set
CONFIG_X86_CPUFREQ_NFORCE2=y
# CONFIG_X86_LONGRUN is not set
# CONFIG_X86_LONGHAUL is not set
# CONFIG_X86_E_POWERSAVER is not set

#
# shared options
#
CONFIG_X86_SPEEDSTEP_LIB=y
CONFIG_X86_SPEEDSTEP_RELAXED_CAP_CHECK=y

#
# CPU Idle
#
CONFIG_CPU_IDLE=y
# CONFIG_CPU_IDLE_GOV_LADDER is not set
CONFIG_CPU_IDLE_GOV_MENU=y
# CONFIG_ARCH_NEEDS_CPU_IDLE_COUPLED is not set
# CONFIG_INTEL_IDLE is not set

#
# Bus options (PCI etc.)
#
CONFIG_PCI=y
# CONFIG_PCI_GOBIOS is not set
# CONFIG_PCI_GOMMCONFIG is not set
# CONFIG_PCI_GODIRECT is not set
# CONFIG_PCI_GOOLPC is not set
CONFIG_PCI_GOANY=y
CONFIG_PCI_BIOS=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_MMCONFIG=y
CONFIG_PCI_OLPC=y
CONFIG_PCI_DOMAINS=y
# CONFIG_PCI_CNB20LE_QUIRK is not set
# CONFIG_PCIEPORTBUS is not set
# CONFIG_PCI_MSI is not set
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCI_REALLOC_ENABLE_AUTO is not set
# CONFIG_PCI_STUB is not set
CONFIG_HT_IRQ=y
# CONFIG_PCI_IOV is not set
# CONFIG_PCI_PRI is not set
# CONFIG_PCI_PASID is not set
CONFIG_PCI_LABEL=y
# CONFIG_HOTPLUG_PCI is not set

#
# DesignWare PCI Core Support
#

#
# PCI host controller drivers
#
# CONFIG_ISA_BUS is not set
CONFIG_ISA_DMA_API=y
CONFIG_ISA=y
CONFIG_EISA=y
# CONFIG_EISA_VLB_PRIMING is not set
CONFIG_EISA_PCI_EISA=y
# CONFIG_EISA_VIRTUAL_ROOT is not set
# CONFIG_EISA_NAMES is not set
CONFIG_SCx200=y
CONFIG_SCx200HR_TIMER=y
CONFIG_OLPC=y
# CONFIG_OLPC_XO15_SCI is not set
# CONFIG_ALIX is not set
# CONFIG_NET5501 is not set
# CONFIG_GEOS is not set
# CONFIG_PCCARD is not set
# CONFIG_RAPIDIO is not set
CONFIG_X86_SYSFB=y

#
# Executable file formats / Emulations
#
CONFIG_BINFMT_ELF=y
CONFIG_ELFCORE=y
CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y
CONFIG_BINFMT_SCRIPT=y
CONFIG_HAVE_AOUT=y
# CONFIG_BINFMT_AOUT is not set
CONFIG_BINFMT_MISC=y
CONFIG_COREDUMP=y
CONFIG_COMPAT_32=y
CONFIG_HAVE_ATOMIC_IOMAP=y
CONFIG_NET=y

#
# Networking options
#
# CONFIG_PACKET is not set
CONFIG_UNIX=y
# CONFIG_UNIX_DIAG is not set
# CONFIG_NET_KEY is not set
# CONFIG_INET is not set
# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NET_PTP_CLASSIFY is not set
# CONFIG_NETWORK_PHY_TIMESTAMPING is not set
# CONFIG_NETFILTER is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_PHONET is not set
# CONFIG_IEEE802154 is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
# CONFIG_BATMAN_ADV is not set
# CONFIG_VSOCKETS is not set
# CONFIG_NETLINK_DIAG is not set
# CONFIG_MPLS is not set
# CONFIG_HSR is not set
CONFIG_RPS=y
CONFIG_RFS_ACCEL=y
CONFIG_XPS=y
# CONFIG_CGROUP_NET_PRIO is not set
# CONFIG_CGROUP_NET_CLASSID is not set
CONFIG_NET_RX_BUSY_POLL=y
CONFIG_BQL=y
CONFIG_NET_FLOW_LIMIT=y

#
# Network testing
#
# CONFIG_HAMRADIO is not set
# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_STREAM_PARSER is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
# CONFIG_LIB80211 is not set

#
# CFG80211 needs to be enabled for MAC80211
#
CONFIG_MAC80211_STA_HASH_MAX_SIZE=0
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# CONFIG_CAIF is not set
# CONFIG_NFC is not set
# CONFIG_PSAMPLE is not set
# CONFIG_NET_IFE is not set
# CONFIG_LWTUNNEL is not set
# CONFIG_DST_CACHE is not set
# CONFIG_GRO_CELLS is not set
# CONFIG_NET_DEVLINK is not set
CONFIG_MAY_USE_DEVLINK=y

#
# Device Drivers
#

#
# Generic Driver Options
#
CONFIG_UEVENT_HELPER=y
CONFIG_UEVENT_HELPER_PATH=""
CONFIG_DEVTMPFS=y
# CONFIG_DEVTMPFS_MOUNT is not set
# CONFIG_STANDALONE is not set
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
CONFIG_FIRMWARE_IN_KERNEL=y
CONFIG_EXTRA_FIRMWARE=""
CONFIG_FW_LOADER_USER_HELPER=y
# CONFIG_FW_LOADER_USER_HELPER_FALLBACK is not set
# CONFIG_ALLOW_DEV_COREDUMP is not set
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not set
CONFIG_DEBUG_TEST_DRIVER_REMOVE=y
# CONFIG_SYS_HYPERVISOR is not set
# CONFIG_GENERIC_CPU_DEVICES is not set
CONFIG_GENERIC_CPU_AUTOPROBE=y
CONFIG_REGMAP=y
CONFIG_REGMAP_I2C=y
CONFIG_REGMAP_MMIO=y
CONFIG_REGMAP_IRQ=y
CONFIG_DMA_SHARED_BUFFER=y
CONFIG_DMA_FENCE_TRACE=y

#
# Bus devices
#
# CONFIG_CONNECTOR is not set
# CONFIG_MTD is not set
CONFIG_OF=y
# CONFIG_OF_UNITTEST is not set
CONFIG_OF_PROMTREE=y
CONFIG_OF_DYNAMIC=y
CONFIG_OF_ADDRESS=y
CONFIG_OF_ADDRESS_PCI=y
CONFIG_OF_IRQ=y
CONFIG_OF_PCI=y
CONFIG_OF_PCI_IRQ=y
CONFIG_OF_RESOLVE=y
CONFIG_OF_OVERLAY=y
CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
CONFIG_PARPORT=y
CONFIG_PARPORT_PC=y
# CONFIG_PARPORT_SERIAL is not set
# CONFIG_PARPORT_PC_FIFO is not set
CONFIG_PARPORT_PC_SUPERIO=y
# CONFIG_PARPORT_GSC is not set
CONFIG_PARPORT_AX88796=y
# CONFIG_PARPORT_1284 is not set
CONFIG_PARPORT_NOT_PC=y
CONFIG_PNP=y
CONFIG_PNP_DEBUG_MESSAGES=y

#
# Protocols
#
# CONFIG_ISAPNP is not set
# CONFIG_PNPBIOS is not set
CONFIG_PNPACPI=y
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_NULL_BLK is not set
CONFIG_BLK_DEV_FD=y
# CONFIG_PARIDE is not set
# CONFIG_BLK_DEV_PCIESSD_MTIP32XX is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
# CONFIG_BLK_DEV_LOOP is not set

#
# DRBD disabled because PROC_FS or INET not selected
#
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_RAM is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
CONFIG_BLK_DEV_HD=y
# CONFIG_BLK_DEV_RSXX is not set
CONFIG_NVME_CORE=y
# CONFIG_BLK_DEV_NVME is not set
# CONFIG_BLK_DEV_NVME_SCSI is not set
CONFIG_NVME_FABRICS=y
CONFIG_NVME_FC=y
# CONFIG_NVME_TARGET is not set

#
# Misc devices
#
CONFIG_SENSORS_LIS3LV02D=y
CONFIG_AD525X_DPOT=y
CONFIG_AD525X_DPOT_I2C=y
CONFIG_DUMMY_IRQ=y
# CONFIG_IBM_ASM is not set
# CONFIG_PHANTOM is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
CONFIG_ICS932S401=y
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
CONFIG_APDS9802ALS=y
CONFIG_ISL29003=y
CONFIG_ISL29020=y
CONFIG_SENSORS_TSL2550=y
CONFIG_SENSORS_BH1770=y
CONFIG_SENSORS_APDS990X=y
CONFIG_HMC6352=y
CONFIG_DS1682=y
# CONFIG_PCH_PHUB is not set
# CONFIG_USB_SWITCH_FSA9480 is not set
# CONFIG_SRAM is not set
CONFIG_PANEL=y
CONFIG_PANEL_PARPORT=0
CONFIG_PANEL_PROFILE=5
CONFIG_PANEL_CHANGE_MESSAGE=y
CONFIG_PANEL_BOOT_MESSAGE=""
CONFIG_C2PORT=y
CONFIG_C2PORT_DURAMAR_2150=y

#
# EEPROM support
#
CONFIG_EEPROM_AT24=y
CONFIG_EEPROM_LEGACY=y
CONFIG_EEPROM_MAX6875=y
CONFIG_EEPROM_93CX6=y
CONFIG_EEPROM_IDT_89HPESX=y
# CONFIG_CB710_CORE is not set

#
# Texas Instruments shared transport line discipline
#
# CONFIG_TI_ST is not set
CONFIG_SENSORS_LIS3_I2C=y

#
# Altera FPGA firmware download module
#
CONFIG_ALTERA_STAPL=y
# CONFIG_INTEL_MEI is not set
# CONFIG_INTEL_MEI_ME is not set
# CONFIG_INTEL_MEI_TXE is not set
# CONFIG_VMWARE_VMCI is not set

#
# Intel MIC Bus Driver
#

#
# SCIF Bus Driver
#

#
# VOP Bus Driver
#

#
# Intel MIC Host Driver
#

#
# Intel MIC Card Driver
#

#
# SCIF Driver
#

#
# Intel MIC Coprocessor State Management (COSM) Drivers
#

#
# VOP Driver
#
CONFIG_ECHO=y
# CONFIG_CXL_BASE is not set
# CONFIG_CXL_AFU_DRIVER_OPS is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set

#
# SCSI device support
#
CONFIG_SCSI_MOD=y
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
# CONFIG_SCSI_NETLINK is not set
# CONFIG_SCSI_MQ_DEFAULT is not set
CONFIG_SCSI_PROC_FS=y

#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
CONFIG_CHR_DEV_ST=y
CONFIG_CHR_DEV_OSST=y
# CONFIG_BLK_DEV_SR is not set
CONFIG_CHR_DEV_SG=y
CONFIG_CHR_DEV_SCH=y
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set
# CONFIG_SCSI_SCAN_ASYNC is not set

#
# SCSI Transports
#
CONFIG_SCSI_SPI_ATTRS=y
# CONFIG_SCSI_FC_ATTRS is not set
# CONFIG_SCSI_ISCSI_ATTRS is not set
CONFIG_SCSI_SAS_ATTRS=y
CONFIG_SCSI_SAS_LIBSAS=y
# CONFIG_SCSI_SAS_HOST_SMP is not set
# CONFIG_SCSI_SRP_ATTRS is not set
CONFIG_SCSI_LOWLEVEL=y
CONFIG_ISCSI_BOOT_SYSFS=y
# CONFIG_SCSI_BNX2_ISCSI is not set
# CONFIG_BE2ISCSI is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_HPSA is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_3W_SAS is not set
# CONFIG_SCSI_ACARD is not set
CONFIG_SCSI_AHA152X=y
CONFIG_SCSI_AHA1542=y
CONFIG_SCSI_AHA1740=y
# CONFIG_SCSI_AACRAID is not set
CONFIG_SCSI_AIC7XXX=y
CONFIG_AIC7XXX_CMDS_PER_DEVICE=32
CONFIG_AIC7XXX_RESET_DELAY_MS=5000
CONFIG_AIC7XXX_DEBUG_ENABLE=y
CONFIG_AIC7XXX_DEBUG_MASK=0
CONFIG_AIC7XXX_REG_PRETTY_PRINT=y
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_AIC94XX is not set
# CONFIG_SCSI_MVSAS is not set
# CONFIG_SCSI_MVUMI is not set
# CONFIG_SCSI_DPT_I2O is not set
CONFIG_SCSI_ADVANSYS=y
# CONFIG_SCSI_ARCMSR is not set
# CONFIG_SCSI_ESAS2R is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
# CONFIG_SCSI_MPT3SAS is not set
# CONFIG_SCSI_MPT2SAS is not set
# CONFIG_SCSI_SMARTPQI is not set
# CONFIG_SCSI_UFSHCD is not set
# CONFIG_SCSI_HPTIOP is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_VMWARE_PVSCSI is not set
# CONFIG_SCSI_SNIC is not set
# CONFIG_SCSI_DMX3191D is not set
CONFIG_SCSI_EATA=y
CONFIG_SCSI_EATA_TAGGED_QUEUE=y
# CONFIG_SCSI_EATA_LINKED_COMMANDS is not set
CONFIG_SCSI_EATA_MAX_TAGS=16
CONFIG_SCSI_FUTURE_DOMAIN=y
CONFIG_SCSI_GDTH=y
# CONFIG_SCSI_ISCI is not set
CONFIG_SCSI_GENERIC_NCR5380=y
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
CONFIG_SCSI_PPA=y
CONFIG_SCSI_IMM=y
CONFIG_SCSI_IZIP_EPP16=y
# CONFIG_SCSI_IZIP_SLOW_CTR is not set
# CONFIG_SCSI_NCR53C406A is not set
# CONFIG_SCSI_STEX is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_QLOGIC_FAS is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
# CONFIG_SCSI_QLA_ISCSI is not set
# CONFIG_SCSI_SIM710 is not set
CONFIG_SCSI_SYM53C416=y
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_AM53C974 is not set
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_WD719X is not set
CONFIG_SCSI_DEBUG=y
# CONFIG_SCSI_PMCRAID is not set
# CONFIG_SCSI_PM8001 is not set
CONFIG_SCSI_DH=y
CONFIG_SCSI_DH_RDAC=y
CONFIG_SCSI_DH_HP_SW=y
# CONFIG_SCSI_DH_EMC is not set
CONFIG_SCSI_DH_ALUA=y
CONFIG_SCSI_OSD_INITIATOR=y
# CONFIG_SCSI_OSD_ULD is not set
CONFIG_SCSI_OSD_DPRINT_SENSE=1
CONFIG_SCSI_OSD_DEBUG=y
# CONFIG_ATA is not set
CONFIG_MD=y
# CONFIG_BLK_DEV_MD is not set
CONFIG_BCACHE=y
CONFIG_BCACHE_DEBUG=y
CONFIG_BCACHE_CLOSURES_DEBUG=y
# CONFIG_BLK_DEV_DM is not set
CONFIG_TARGET_CORE=y
CONFIG_TCM_IBLOCK=y
CONFIG_TCM_FILEIO=y
CONFIG_TCM_PSCSI=y
# CONFIG_TCM_USER2 is not set
# CONFIG_LOOPBACK_TARGET is not set
# CONFIG_ISCSI_TARGET is not set
CONFIG_SBP_TARGET=y
# CONFIG_FUSION is not set

#
# IEEE 1394 (FireWire) support
#
CONFIG_FIREWIRE=y
# CONFIG_FIREWIRE_OHCI is not set
CONFIG_FIREWIRE_SBP2=y
# CONFIG_FIREWIRE_NOSY is not set
CONFIG_MACINTOSH_DRIVERS=y
# CONFIG_MAC_EMUMOUSEBTN is not set
# CONFIG_NETDEVICES is not set
CONFIG_NVM=y
# CONFIG_NVM_DEBUG is not set
# CONFIG_NVM_RRPC is not set

#
# Input device support
#
CONFIG_INPUT=y
CONFIG_INPUT_LEDS=y
CONFIG_INPUT_FF_MEMLESS=y
CONFIG_INPUT_POLLDEV=y
CONFIG_INPUT_SPARSEKMAP=y
CONFIG_INPUT_MATRIXKMAP=y

#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
CONFIG_INPUT_EVDEV=y
# CONFIG_INPUT_EVBUG is not set

#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
# CONFIG_KEYBOARD_ADC is not set
# CONFIG_KEYBOARD_ADP5588 is not set
# CONFIG_KEYBOARD_ADP5589 is not set
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_QT1070 is not set
# CONFIG_KEYBOARD_QT2160 is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_GPIO is not set
# CONFIG_KEYBOARD_GPIO_POLLED is not set
# CONFIG_KEYBOARD_TCA6416 is not set
# CONFIG_KEYBOARD_TCA8418 is not set
# CONFIG_KEYBOARD_MATRIX is not set
# CONFIG_KEYBOARD_LM8323 is not set
# CONFIG_KEYBOARD_LM8333 is not set
# CONFIG_KEYBOARD_MAX7359 is not set
# CONFIG_KEYBOARD_MCS is not set
# CONFIG_KEYBOARD_MPR121 is not set
# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_KEYBOARD_OPENCORES is not set
# CONFIG_KEYBOARD_SAMSUNG is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_OMAP4 is not set
# CONFIG_KEYBOARD_TC3589X is not set
# CONFIG_KEYBOARD_TM2_TOUCHKEY is not set
# CONFIG_KEYBOARD_TWL4030 is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_CAP11XX is not set
# CONFIG_KEYBOARD_BCM is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
CONFIG_MOUSE_PS2_ALPS=y
# CONFIG_MOUSE_PS2_BYD is not set
# CONFIG_MOUSE_PS2_LOGIPS2PP is not set
CONFIG_MOUSE_PS2_SYNAPTICS=y
CONFIG_MOUSE_PS2_CYPRESS=y
CONFIG_MOUSE_PS2_LIFEBOOK=y
CONFIG_MOUSE_PS2_TRACKPOINT=y
# CONFIG_MOUSE_PS2_ELANTECH is not set
# CONFIG_MOUSE_PS2_SENTELIC is not set
# CONFIG_MOUSE_PS2_TOUCHKIT is not set
# CONFIG_MOUSE_PS2_OLPC is not set
CONFIG_MOUSE_PS2_FOCALTECH=y
# CONFIG_MOUSE_PS2_VMMOUSE is not set
# CONFIG_MOUSE_SERIAL is not set
CONFIG_MOUSE_APPLETOUCH=y
# CONFIG_MOUSE_BCM5974 is not set
CONFIG_MOUSE_CYAPA=y
# CONFIG_MOUSE_ELAN_I2C is not set
CONFIG_MOUSE_INPORT=y
# CONFIG_MOUSE_ATIXL is not set
# CONFIG_MOUSE_LOGIBM is not set
CONFIG_MOUSE_PC110PAD=y
CONFIG_MOUSE_VSXXXAA=y
# CONFIG_MOUSE_GPIO is not set
CONFIG_MOUSE_SYNAPTICS_I2C=y
# CONFIG_MOUSE_SYNAPTICS_USB is not set
# CONFIG_INPUT_JOYSTICK is not set
CONFIG_INPUT_TABLET=y
CONFIG_TABLET_USB_ACECAD=y
CONFIG_TABLET_USB_AIPTEK=y
CONFIG_TABLET_USB_GTCO=y
CONFIG_TABLET_USB_HANWANG=y
# CONFIG_TABLET_USB_KBTAB is not set
# CONFIG_TABLET_USB_PEGASUS is not set
CONFIG_TABLET_SERIAL_WACOM4=y
CONFIG_INPUT_TOUCHSCREEN=y
CONFIG_TOUCHSCREEN_PROPERTIES=y
CONFIG_TOUCHSCREEN_AD7879=y
CONFIG_TOUCHSCREEN_AD7879_I2C=y
CONFIG_TOUCHSCREEN_AR1021_I2C=y
# CONFIG_TOUCHSCREEN_ATMEL_MXT is not set
CONFIG_TOUCHSCREEN_AUO_PIXCIR=y
# CONFIG_TOUCHSCREEN_BU21013 is not set
CONFIG_TOUCHSCREEN_CHIPONE_ICN8318=y
# CONFIG_TOUCHSCREEN_CY8CTMG110 is not set
# CONFIG_TOUCHSCREEN_CYTTSP_CORE is not set
# CONFIG_TOUCHSCREEN_CYTTSP4_CORE is not set
CONFIG_TOUCHSCREEN_DA9052=y
CONFIG_TOUCHSCREEN_DYNAPRO=y
CONFIG_TOUCHSCREEN_HAMPSHIRE=y
CONFIG_TOUCHSCREEN_EETI=y
# CONFIG_TOUCHSCREEN_EGALAX is not set
CONFIG_TOUCHSCREEN_EGALAX_SERIAL=y
CONFIG_TOUCHSCREEN_FUJITSU=y
# CONFIG_TOUCHSCREEN_GOODIX is not set
CONFIG_TOUCHSCREEN_ILI210X=y
CONFIG_TOUCHSCREEN_GUNZE=y
# CONFIG_TOUCHSCREEN_EKTF2127 is not set
# CONFIG_TOUCHSCREEN_ELAN is not set
CONFIG_TOUCHSCREEN_ELO=y
CONFIG_TOUCHSCREEN_WACOM_W8001=y
# CONFIG_TOUCHSCREEN_WACOM_I2C is not set
CONFIG_TOUCHSCREEN_MAX11801=y
CONFIG_TOUCHSCREEN_MCS5000=y
CONFIG_TOUCHSCREEN_MMS114=y
CONFIG_TOUCHSCREEN_MELFAS_MIP4=y
CONFIG_TOUCHSCREEN_MTOUCH=y
CONFIG_TOUCHSCREEN_IMX6UL_TSC=y
# CONFIG_TOUCHSCREEN_INEXIO is not set
CONFIG_TOUCHSCREEN_MK712=y
CONFIG_TOUCHSCREEN_HTCPEN=y
# CONFIG_TOUCHSCREEN_PENMOUNT is not set
# CONFIG_TOUCHSCREEN_EDT_FT5X06 is not set
CONFIG_TOUCHSCREEN_TOUCHRIGHT=y
# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
CONFIG_TOUCHSCREEN_PIXCIR=y
CONFIG_TOUCHSCREEN_WDT87XX_I2C=y
CONFIG_TOUCHSCREEN_WM831X=y
CONFIG_TOUCHSCREEN_USB_COMPOSITE=y
CONFIG_TOUCHSCREEN_MC13783=y
CONFIG_TOUCHSCREEN_USB_EGALAX=y
# CONFIG_TOUCHSCREEN_USB_PANJIT is not set
# CONFIG_TOUCHSCREEN_USB_3M is not set
CONFIG_TOUCHSCREEN_USB_ITM=y
# CONFIG_TOUCHSCREEN_USB_ETURBO is not set
CONFIG_TOUCHSCREEN_USB_GUNZE=y
# CONFIG_TOUCHSCREEN_USB_DMC_TSC10 is not set
# CONFIG_TOUCHSCREEN_USB_IRTOUCH is not set
# CONFIG_TOUCHSCREEN_USB_IDEALTEK is not set
CONFIG_TOUCHSCREEN_USB_GENERAL_TOUCH=y
# CONFIG_TOUCHSCREEN_USB_GOTOP is not set
# CONFIG_TOUCHSCREEN_USB_JASTEC is not set
# CONFIG_TOUCHSCREEN_USB_ELO is not set
CONFIG_TOUCHSCREEN_USB_E2I=y
CONFIG_TOUCHSCREEN_USB_ZYTRONIC=y
CONFIG_TOUCHSCREEN_USB_ETT_TC45USB=y
# CONFIG_TOUCHSCREEN_USB_NEXIO is not set
CONFIG_TOUCHSCREEN_USB_EASYTOUCH=y
# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
# CONFIG_TOUCHSCREEN_TSC_SERIO is not set
# CONFIG_TOUCHSCREEN_TSC2004 is not set
CONFIG_TOUCHSCREEN_TSC2007=y
# CONFIG_TOUCHSCREEN_RM_TS is not set
CONFIG_TOUCHSCREEN_SILEAD=y
# CONFIG_TOUCHSCREEN_SIS_I2C is not set
# CONFIG_TOUCHSCREEN_ST1232 is not set
CONFIG_TOUCHSCREEN_SX8654=y
# CONFIG_TOUCHSCREEN_TPS6507X is not set
# CONFIG_TOUCHSCREEN_ZET6223 is not set
# CONFIG_TOUCHSCREEN_ZFORCE is not set
CONFIG_TOUCHSCREEN_COLIBRI_VF50=y
CONFIG_TOUCHSCREEN_ROHM_BU21023=y
CONFIG_INPUT_MISC=y
CONFIG_INPUT_88PM80X_ONKEY=y
CONFIG_INPUT_AD714X=y
CONFIG_INPUT_AD714X_I2C=y
CONFIG_INPUT_ATMEL_CAPTOUCH=y
# CONFIG_INPUT_BMA150 is not set
# CONFIG_INPUT_E3X0_BUTTON is not set
CONFIG_INPUT_PCSPKR=y
# CONFIG_INPUT_MAX77693_HAPTIC is not set
CONFIG_INPUT_MAX8925_ONKEY=y
# CONFIG_INPUT_MAX8997_HAPTIC is not set
CONFIG_INPUT_MC13783_PWRBUTTON=y
CONFIG_INPUT_MMA8450=y
# CONFIG_INPUT_APANEL is not set
CONFIG_INPUT_GP2A=y
CONFIG_INPUT_GPIO_BEEPER=y
CONFIG_INPUT_GPIO_TILT_POLLED=y
# CONFIG_INPUT_GPIO_DECODER is not set
CONFIG_INPUT_WISTRON_BTNS=y
# CONFIG_INPUT_ATLAS_BTNS is not set
# CONFIG_INPUT_ATI_REMOTE2 is not set
CONFIG_INPUT_KEYSPAN_REMOTE=y
# CONFIG_INPUT_KXTJ9 is not set
CONFIG_INPUT_POWERMATE=y
CONFIG_INPUT_YEALINK=y
CONFIG_INPUT_CM109=y
CONFIG_INPUT_REGULATOR_HAPTIC=y
CONFIG_INPUT_RETU_PWRBUTTON=y
CONFIG_INPUT_TPS65218_PWRBUTTON=y
CONFIG_INPUT_AXP20X_PEK=y
# CONFIG_INPUT_TWL4030_PWRBUTTON is not set
CONFIG_INPUT_TWL4030_VIBRA=y
CONFIG_INPUT_TWL6040_VIBRA=y
# CONFIG_INPUT_UINPUT is not set
CONFIG_INPUT_PALMAS_PWRBUTTON=y
CONFIG_INPUT_PCF50633_PMU=y
CONFIG_INPUT_PCF8574=y
CONFIG_INPUT_PWM_BEEPER=y
# CONFIG_INPUT_GPIO_ROTARY_ENCODER is not set
# CONFIG_INPUT_DA9052_ONKEY is not set
# CONFIG_INPUT_DA9055_ONKEY is not set
# CONFIG_INPUT_DA9063_ONKEY is not set
# CONFIG_INPUT_WM831X_ON is not set
CONFIG_INPUT_ADXL34X=y
CONFIG_INPUT_ADXL34X_I2C=y
CONFIG_INPUT_IMS_PCU=y
CONFIG_INPUT_CMA3000=y
CONFIG_INPUT_CMA3000_I2C=y
# CONFIG_INPUT_IDEAPAD_SLIDEBAR is not set
CONFIG_INPUT_DRV260X_HAPTICS=y
CONFIG_INPUT_DRV2665_HAPTICS=y
CONFIG_INPUT_DRV2667_HAPTICS=y
CONFIG_RMI4_CORE=y
CONFIG_RMI4_I2C=y
# CONFIG_RMI4_SMB is not set
CONFIG_RMI4_F03=y
CONFIG_RMI4_F03_SERIO=y
# CONFIG_RMI4_F11 is not set
# CONFIG_RMI4_F12 is not set
CONFIG_RMI4_F30=y
CONFIG_RMI4_F34=y
# CONFIG_RMI4_F55 is not set

#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_ARCH_MIGHT_HAVE_PC_SERIO=y
CONFIG_SERIO_I8042=y
CONFIG_SERIO_SERPORT=y
CONFIG_SERIO_CT82C710=y
CONFIG_SERIO_PARKBD=y
# CONFIG_SERIO_PCIPS2 is not set
CONFIG_SERIO_LIBPS2=y
CONFIG_SERIO_RAW=y
CONFIG_SERIO_ALTERA_PS2=y
CONFIG_SERIO_PS2MULT=y
CONFIG_SERIO_ARC_PS2=y
CONFIG_SERIO_APBPS2=y
CONFIG_SERIO_OLPC_APSP=y
CONFIG_USERIO=y
CONFIG_GAMEPORT=y
CONFIG_GAMEPORT_NS558=y
CONFIG_GAMEPORT_L4=y
# CONFIG_GAMEPORT_EMU10K1 is not set
# CONFIG_GAMEPORT_FM801 is not set

#
# Character devices
#
CONFIG_TTY=y
# CONFIG_VT is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_LEGACY_PTYS is not set
# CONFIG_SERIAL_NONSTANDARD is not set
# CONFIG_NOZOMI is not set
# CONFIG_N_GSM is not set
CONFIG_TRACE_ROUTER=y
CONFIG_TRACE_SINK=y
# CONFIG_DEVMEM is not set
CONFIG_DEVKMEM=y

#
# Serial drivers
#
CONFIG_SERIAL_EARLYCON=y
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_DEPRECATED_OPTIONS=y
CONFIG_SERIAL_8250_PNP=y
CONFIG_SERIAL_8250_FINTEK=y
CONFIG_SERIAL_8250_CONSOLE=y
# CONFIG_SERIAL_8250_DMA is not set
CONFIG_SERIAL_8250_PCI=y
CONFIG_SERIAL_8250_EXAR=y
CONFIG_SERIAL_8250_NR_UARTS=4
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_MANY_PORTS=y
CONFIG_SERIAL_8250_FOURPORT=y
CONFIG_SERIAL_8250_ACCENT=y
CONFIG_SERIAL_8250_BOCA=y
CONFIG_SERIAL_8250_EXAR_ST16C554=y
# CONFIG_SERIAL_8250_HUB6 is not set
# CONFIG_SERIAL_8250_SHARE_IRQ is not set
CONFIG_SERIAL_8250_DETECT_IRQ=y
# CONFIG_SERIAL_8250_RSA is not set
# CONFIG_SERIAL_8250_FSL is not set
# CONFIG_SERIAL_8250_DW is not set
CONFIG_SERIAL_8250_RT288X=y
CONFIG_SERIAL_8250_LPSS=y
CONFIG_SERIAL_8250_MID=y
# CONFIG_SERIAL_8250_MOXA is not set
CONFIG_SERIAL_OF_PLATFORM=y

#
# Non-8250 serial port support
#
CONFIG_SERIAL_UARTLITE=y
CONFIG_SERIAL_UARTLITE_CONSOLE=y
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
CONFIG_SERIAL_SCCNXP=y
CONFIG_SERIAL_SCCNXP_CONSOLE=y
CONFIG_SERIAL_SC16IS7XX=y
# CONFIG_SERIAL_SC16IS7XX_I2C is not set
CONFIG_SERIAL_TIMBERDALE=y
CONFIG_SERIAL_ALTERA_JTAGUART=y
CONFIG_SERIAL_ALTERA_JTAGUART_CONSOLE=y
CONFIG_SERIAL_ALTERA_JTAGUART_CONSOLE_BYPASS=y
CONFIG_SERIAL_ALTERA_UART=y
CONFIG_SERIAL_ALTERA_UART_MAXPORTS=4
CONFIG_SERIAL_ALTERA_UART_BAUDRATE=115200
# CONFIG_SERIAL_ALTERA_UART_CONSOLE is not set
# CONFIG_SERIAL_PCH_UART is not set
CONFIG_SERIAL_XILINX_PS_UART=y
# CONFIG_SERIAL_XILINX_PS_UART_CONSOLE is not set
CONFIG_SERIAL_ARC=y
# CONFIG_SERIAL_ARC_CONSOLE is not set
CONFIG_SERIAL_ARC_NR_PORTS=1
# CONFIG_SERIAL_RP2 is not set
# CONFIG_SERIAL_FSL_LPUART is not set
# CONFIG_SERIAL_CONEXANT_DIGICOLOR is not set
CONFIG_SERIAL_MEN_Z135=y
CONFIG_SERIAL_DEV_BUS=y
# CONFIG_SERIAL_DEV_CTRL_TTYPORT is not set
CONFIG_TTY_PRINTK=y
# CONFIG_PRINTER is not set
CONFIG_PPDEV=y
# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=y
CONFIG_HW_RANDOM_TIMERIOMEM=y
CONFIG_HW_RANDOM_INTEL=y
CONFIG_HW_RANDOM_AMD=y
CONFIG_HW_RANDOM_GEODE=y
CONFIG_HW_RANDOM_VIA=y
CONFIG_NVRAM=y
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_SONYPI is not set
CONFIG_MWAVE=y
CONFIG_SCx200_GPIO=y
# CONFIG_PC8736x_GPIO is not set
CONFIG_NSC_GPIO=y
CONFIG_RAW_DRIVER=y
CONFIG_MAX_RAW_DEVS=256
# CONFIG_HPET is not set
# CONFIG_HANGCHECK_TIMER is not set
# CONFIG_TCG_TPM is not set
CONFIG_TELCLOCK=y
CONFIG_DEVPORT=y
CONFIG_XILLYBUS=y
CONFIG_XILLYBUS_OF=y

#
# I2C support
#
CONFIG_I2C=y
CONFIG_ACPI_I2C_OPREGION=y
CONFIG_I2C_BOARDINFO=y
# CONFIG_I2C_COMPAT is not set
CONFIG_I2C_CHARDEV=y
CONFIG_I2C_MUX=y

#
# Multiplexer I2C Chip support
#
CONFIG_I2C_ARB_GPIO_CHALLENGE=y
CONFIG_I2C_MUX_GPIO=y
CONFIG_I2C_MUX_PCA9541=y
# CONFIG_I2C_MUX_PCA954x is not set
# CONFIG_I2C_MUX_REG is not set
CONFIG_I2C_MUX_MLXCPLD=y
CONFIG_I2C_HELPER_AUTO=y
CONFIG_I2C_SMBUS=y
CONFIG_I2C_ALGOBIT=y

#
# I2C Hardware Bus support
#

#
# PC SMBus host controller drivers
#
# CONFIG_I2C_ALI1535 is not set
# CONFIG_I2C_ALI1563 is not set
# CONFIG_I2C_ALI15X3 is not set
# CONFIG_I2C_AMD756 is not set
# CONFIG_I2C_AMD8111 is not set
# CONFIG_I2C_I801 is not set
# CONFIG_I2C_ISCH is not set
# CONFIG_I2C_ISMT is not set
# CONFIG_I2C_PIIX4 is not set
# CONFIG_I2C_NFORCE2 is not set
# CONFIG_I2C_SIS5595 is not set
# CONFIG_I2C_SIS630 is not set
# CONFIG_I2C_SIS96X is not set
# CONFIG_I2C_VIA is not set
# CONFIG_I2C_VIAPRO is not set

#
# ACPI drivers
#
# CONFIG_I2C_SCMI is not set

#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
# CONFIG_I2C_CBUS_GPIO is not set
CONFIG_I2C_DESIGNWARE_CORE=y
CONFIG_I2C_DESIGNWARE_PLATFORM=y
# CONFIG_I2C_DESIGNWARE_PCI is not set
# CONFIG_I2C_DESIGNWARE_BAYTRAIL is not set
# CONFIG_I2C_EG20T is not set
# CONFIG_I2C_EMEV2 is not set
CONFIG_I2C_GPIO=y
CONFIG_I2C_KEMPLD=y
CONFIG_I2C_OCORES=y
# CONFIG_I2C_PCA_PLATFORM is not set
# CONFIG_I2C_PXA is not set
# CONFIG_I2C_PXA_PCI is not set
# CONFIG_I2C_RK3X is not set
CONFIG_I2C_SIMTEC=y
CONFIG_I2C_XILINX=y

#
# External I2C/SMBus adapter drivers
#
CONFIG_I2C_DIOLAN_U2C=y
CONFIG_I2C_DLN2=y
CONFIG_I2C_PARPORT=y
CONFIG_I2C_PARPORT_LIGHT=y
CONFIG_I2C_ROBOTFUZZ_OSIF=y
CONFIG_I2C_TAOS_EVM=y
# CONFIG_I2C_TINY_USB is not set

#
# Other I2C/SMBus bus drivers
#
# CONFIG_I2C_PCA_ISA is not set
# CONFIG_SCx200_ACB is not set
CONFIG_I2C_SLAVE=y
# CONFIG_I2C_SLAVE_EEPROM is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_SPI is not set
# CONFIG_SPMI is not set
CONFIG_HSI=y
CONFIG_HSI_BOARDINFO=y

#
# HSI controllers
#

#
# HSI clients
#
# CONFIG_HSI_CHAR is not set

#
# PPS support
#
CONFIG_PPS=y
# CONFIG_PPS_DEBUG is not set

#
# PPS clients support
#
CONFIG_PPS_CLIENT_KTIMER=y
CONFIG_PPS_CLIENT_LDISC=y
# CONFIG_PPS_CLIENT_PARPORT is not set
# CONFIG_PPS_CLIENT_GPIO is not set

#
# PPS generators support
#

#
# PTP clock support
#
# CONFIG_PTP_1588_CLOCK is not set

#
# Enable PHYLIB and NETWORK_PHY_TIMESTAMPING to see the additional clocks.
#
# CONFIG_PTP_1588_CLOCK_PCH is not set
CONFIG_GPIOLIB=y
CONFIG_OF_GPIO=y
CONFIG_GPIO_ACPI=y
CONFIG_GPIOLIB_IRQCHIP=y
CONFIG_DEBUG_GPIO=y
CONFIG_GPIO_SYSFS=y
CONFIG_GPIO_GENERIC=y
CONFIG_GPIO_MAX730X=y

#
# Memory mapped GPIO drivers
#
CONFIG_GPIO_74XX_MMIO=y
# CONFIG_GPIO_ALTERA is not set
# CONFIG_GPIO_AMDPT is not set
CONFIG_GPIO_AXP209=y
CONFIG_GPIO_DWAPB=y
# CONFIG_GPIO_EXAR is not set
CONFIG_GPIO_GENERIC_PLATFORM=y
CONFIG_GPIO_GRGPIO=y
# CONFIG_GPIO_ICH is not set
# CONFIG_GPIO_LYNXPOINT is not set
CONFIG_GPIO_MENZ127=y
CONFIG_GPIO_MOCKUP=y
CONFIG_GPIO_SYSCON=y
# CONFIG_GPIO_VX855 is not set
CONFIG_GPIO_XILINX=y

#
# Port-mapped I/O GPIO drivers
#
CONFIG_GPIO_104_DIO_48E=y
CONFIG_GPIO_104_IDIO_16=y
CONFIG_GPIO_104_IDI_48=y
CONFIG_GPIO_F7188X=y
CONFIG_GPIO_GPIO_MM=y
CONFIG_GPIO_IT87=y
# CONFIG_GPIO_SCH is not set
# CONFIG_GPIO_SCH311X is not set
# CONFIG_GPIO_WS16C48 is not set

#
# I2C GPIO expanders
#
CONFIG_GPIO_ADP5588=y
# CONFIG_GPIO_ADP5588_IRQ is not set
CONFIG_GPIO_ADNP=y
CONFIG_GPIO_MAX7300=y
CONFIG_GPIO_MAX732X=y
CONFIG_GPIO_MAX732X_IRQ=y
# CONFIG_GPIO_PCA953X is not set
CONFIG_GPIO_PCF857X=y
CONFIG_GPIO_TPIC2810=y

#
# MFD GPIO expanders
#
# CONFIG_GPIO_ARIZONA is not set
# CONFIG_GPIO_CRYSTAL_COVE is not set
CONFIG_GPIO_DA9052=y
CONFIG_GPIO_DA9055=y
CONFIG_GPIO_DLN2=y
CONFIG_GPIO_KEMPLD=y
# CONFIG_GPIO_LP3943 is not set
# CONFIG_GPIO_PALMAS is not set
CONFIG_GPIO_RC5T583=y
CONFIG_GPIO_TC3589X=y
CONFIG_GPIO_TPS65086=y
# CONFIG_GPIO_TPS65218 is not set
CONFIG_GPIO_TPS6586X=y
CONFIG_GPIO_TPS65912=y
CONFIG_GPIO_TWL4030=y
CONFIG_GPIO_TWL6040=y
CONFIG_GPIO_WHISKEY_COVE=y
CONFIG_GPIO_WM831X=y
CONFIG_GPIO_WM8350=y
# CONFIG_GPIO_WM8994 is not set

#
# PCI GPIO expanders
#
# CONFIG_GPIO_AMD8111 is not set
# CONFIG_GPIO_BT8XX is not set
# CONFIG_GPIO_ML_IOH is not set
# CONFIG_GPIO_PCH is not set
# CONFIG_GPIO_PCI_IDIO_16 is not set
# CONFIG_GPIO_RDC321X is not set
# CONFIG_GPIO_SODAVILLE is not set

#
# SPI or I2C GPIO expanders
#
CONFIG_GPIO_MCP23S08=y

#
# USB GPIO expanders
#
CONFIG_W1=y

#
# 1-wire Bus Masters
#
# CONFIG_W1_MASTER_MATROX is not set
CONFIG_W1_MASTER_DS2490=y
CONFIG_W1_MASTER_DS2482=y
CONFIG_W1_MASTER_DS1WM=y
# CONFIG_W1_MASTER_GPIO is not set

#
# 1-wire Slaves
#
# CONFIG_W1_SLAVE_THERM is not set
CONFIG_W1_SLAVE_SMEM=y
CONFIG_W1_SLAVE_DS2405=y
CONFIG_W1_SLAVE_DS2408=y
CONFIG_W1_SLAVE_DS2408_READBACK=y
# CONFIG_W1_SLAVE_DS2413 is not set
CONFIG_W1_SLAVE_DS2406=y
CONFIG_W1_SLAVE_DS2423=y
CONFIG_W1_SLAVE_DS2431=y
CONFIG_W1_SLAVE_DS2433=y
# CONFIG_W1_SLAVE_DS2433_CRC is not set
CONFIG_W1_SLAVE_DS2760=y
CONFIG_W1_SLAVE_DS2780=y
# CONFIG_W1_SLAVE_DS2781 is not set
CONFIG_W1_SLAVE_DS28E04=y
# CONFIG_W1_SLAVE_BQ27000 is not set
CONFIG_POWER_AVS=y
CONFIG_POWER_RESET=y
CONFIG_POWER_RESET_AS3722=y
# CONFIG_POWER_RESET_GPIO is not set
# CONFIG_POWER_RESET_GPIO_RESTART is not set
# CONFIG_POWER_RESET_LTC2952 is not set
# CONFIG_POWER_RESET_RESTART is not set
CONFIG_POWER_RESET_SYSCON=y
# CONFIG_POWER_RESET_SYSCON_POWEROFF is not set
# CONFIG_SYSCON_REBOOT_MODE is not set
CONFIG_POWER_SUPPLY=y
# CONFIG_POWER_SUPPLY_DEBUG is not set
CONFIG_PDA_POWER=y
CONFIG_GENERIC_ADC_BATTERY=y
# CONFIG_MAX8925_POWER is not set
# CONFIG_WM831X_BACKUP is not set
# CONFIG_WM831X_POWER is not set
CONFIG_WM8350_POWER=y
CONFIG_TEST_POWER=y
CONFIG_BATTERY_ACT8945A=y
CONFIG_BATTERY_DS2760=y
CONFIG_BATTERY_DS2780=y
# CONFIG_BATTERY_DS2781 is not set
CONFIG_BATTERY_DS2782=y
CONFIG_BATTERY_OLPC=y
# CONFIG_BATTERY_SBS is not set
CONFIG_CHARGER_SBS=y
# CONFIG_BATTERY_BQ27XXX is not set
# CONFIG_BATTERY_DA9052 is not set
CONFIG_CHARGER_DA9150=y
CONFIG_BATTERY_DA9150=y
# CONFIG_AXP288_CHARGER is not set
# CONFIG_AXP288_FUEL_GAUGE is not set
CONFIG_BATTERY_MAX17040=y
CONFIG_BATTERY_MAX17042=y
CONFIG_BATTERY_TWL4030_MADC=y
# CONFIG_CHARGER_PCF50633 is not set
CONFIG_BATTERY_RX51=y
# CONFIG_CHARGER_ISP1704 is not set
CONFIG_CHARGER_MAX8903=y
CONFIG_CHARGER_TWL4030=y
CONFIG_CHARGER_LP8727=y
CONFIG_CHARGER_LP8788=y
CONFIG_CHARGER_GPIO=y
CONFIG_CHARGER_MANAGER=y
# CONFIG_CHARGER_DETECTOR_MAX14656 is not set
# CONFIG_CHARGER_MAX77693 is not set
CONFIG_CHARGER_MAX8998=y
# CONFIG_CHARGER_BQ2415X is not set
CONFIG_CHARGER_BQ24190=y
# CONFIG_CHARGER_BQ24257 is not set
CONFIG_CHARGER_BQ24735=y
# CONFIG_CHARGER_BQ25890 is not set
CONFIG_CHARGER_SMB347=y
# CONFIG_CHARGER_TPS65090 is not set
# CONFIG_BATTERY_GAUGE_LTC2941 is not set
CONFIG_BATTERY_RT5033=y
CONFIG_CHARGER_RT9455=y
# CONFIG_AXP20X_POWER is not set
CONFIG_HWMON=y
CONFIG_HWMON_VID=y
CONFIG_HWMON_DEBUG_CHIP=y

#
# Native drivers
#
CONFIG_SENSORS_ABITUGURU=y
CONFIG_SENSORS_ABITUGURU3=y
CONFIG_SENSORS_AD7414=y
CONFIG_SENSORS_AD7418=y
CONFIG_SENSORS_ADM1021=y
CONFIG_SENSORS_ADM1025=y
CONFIG_SENSORS_ADM1026=y
# CONFIG_SENSORS_ADM1029 is not set
CONFIG_SENSORS_ADM1031=y
# CONFIG_SENSORS_ADM9240 is not set
# CONFIG_SENSORS_ADT7410 is not set
CONFIG_SENSORS_ADT7411=y
# CONFIG_SENSORS_ADT7462 is not set
CONFIG_SENSORS_ADT7470=y
CONFIG_SENSORS_ADT7475=y
CONFIG_SENSORS_ASC7621=y
# CONFIG_SENSORS_K8TEMP is not set
# CONFIG_SENSORS_K10TEMP is not set
# CONFIG_SENSORS_APPLESMC is not set
# CONFIG_SENSORS_ASB100 is not set
CONFIG_SENSORS_ATXP1=y
CONFIG_SENSORS_DS620=y
# CONFIG_SENSORS_DS1621 is not set
CONFIG_SENSORS_DELL_SMM=y
# CONFIG_SENSORS_DA9052_ADC is not set
CONFIG_SENSORS_DA9055=y
# CONFIG_SENSORS_I5K_AMB is not set
CONFIG_SENSORS_F71805F=y
# CONFIG_SENSORS_F71882FG is not set
CONFIG_SENSORS_F75375S=y
CONFIG_SENSORS_MC13783_ADC=y
CONFIG_SENSORS_FSCHMD=y
CONFIG_SENSORS_FTSTEUTATES=y
# CONFIG_SENSORS_GL518SM is not set
CONFIG_SENSORS_GL520SM=y
CONFIG_SENSORS_G760A=y
# CONFIG_SENSORS_G762 is not set
# CONFIG_SENSORS_GPIO_FAN is not set
CONFIG_SENSORS_HIH6130=y
CONFIG_SENSORS_IIO_HWMON=y
# CONFIG_SENSORS_I5500 is not set
# CONFIG_SENSORS_CORETEMP is not set
CONFIG_SENSORS_IT87=y
# CONFIG_SENSORS_JC42 is not set
# CONFIG_SENSORS_POWR1220 is not set
CONFIG_SENSORS_LINEAGE=y
CONFIG_SENSORS_LTC2945=y
# CONFIG_SENSORS_LTC2990 is not set
CONFIG_SENSORS_LTC4151=y
CONFIG_SENSORS_LTC4215=y
CONFIG_SENSORS_LTC4222=y
# CONFIG_SENSORS_LTC4245 is not set
# CONFIG_SENSORS_LTC4260 is not set
# CONFIG_SENSORS_LTC4261 is not set
CONFIG_SENSORS_MAX16065=y
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_MAX1668 is not set
# CONFIG_SENSORS_MAX197 is not set
CONFIG_SENSORS_MAX6639=y
CONFIG_SENSORS_MAX6642=y
# CONFIG_SENSORS_MAX6650 is not set
# CONFIG_SENSORS_MAX6697 is not set
# CONFIG_SENSORS_MAX31790 is not set
# CONFIG_SENSORS_MCP3021 is not set
# CONFIG_SENSORS_TC654 is not set
# CONFIG_SENSORS_MENF21BMC_HWMON is not set
CONFIG_SENSORS_LM63=y
CONFIG_SENSORS_LM73=y
CONFIG_SENSORS_LM75=y
CONFIG_SENSORS_LM77=y
# CONFIG_SENSORS_LM78 is not set
CONFIG_SENSORS_LM80=y
# CONFIG_SENSORS_LM83 is not set
CONFIG_SENSORS_LM85=y
CONFIG_SENSORS_LM87=y
CONFIG_SENSORS_LM90=y
CONFIG_SENSORS_LM92=y
CONFIG_SENSORS_LM93=y
CONFIG_SENSORS_LM95234=y
CONFIG_SENSORS_LM95241=y
CONFIG_SENSORS_LM95245=y
CONFIG_SENSORS_PC87360=y
CONFIG_SENSORS_PC87427=y
CONFIG_SENSORS_NTC_THERMISTOR=y
CONFIG_SENSORS_NCT6683=y
CONFIG_SENSORS_NCT6775=y
CONFIG_SENSORS_NCT7802=y
CONFIG_SENSORS_NCT7904=y
# CONFIG_SENSORS_PCF8591 is not set
CONFIG_PMBUS=y
CONFIG_SENSORS_PMBUS=y
CONFIG_SENSORS_ADM1275=y
CONFIG_SENSORS_LM25066=y
CONFIG_SENSORS_LTC2978=y
CONFIG_SENSORS_LTC2978_REGULATOR=y
CONFIG_SENSORS_LTC3815=y
CONFIG_SENSORS_MAX16064=y
# CONFIG_SENSORS_MAX20751 is not set
# CONFIG_SENSORS_MAX34440 is not set
CONFIG_SENSORS_MAX8688=y
# CONFIG_SENSORS_TPS40422 is not set
CONFIG_SENSORS_UCD9000=y
CONFIG_SENSORS_UCD9200=y
CONFIG_SENSORS_ZL6100=y
# CONFIG_SENSORS_PWM_FAN is not set
CONFIG_SENSORS_SHT15=y
CONFIG_SENSORS_SHT21=y
# CONFIG_SENSORS_SHT3x is not set
# CONFIG_SENSORS_SHTC1 is not set
# CONFIG_SENSORS_SIS5595 is not set
CONFIG_SENSORS_DME1737=y
CONFIG_SENSORS_EMC1403=y
CONFIG_SENSORS_EMC2103=y
# CONFIG_SENSORS_EMC6W201 is not set
CONFIG_SENSORS_SMSC47M1=y
CONFIG_SENSORS_SMSC47M192=y
CONFIG_SENSORS_SMSC47B397=y
CONFIG_SENSORS_SCH56XX_COMMON=y
CONFIG_SENSORS_SCH5627=y
# CONFIG_SENSORS_SCH5636 is not set
# CONFIG_SENSORS_STTS751 is not set
CONFIG_SENSORS_SMM665=y
# CONFIG_SENSORS_ADC128D818 is not set
# CONFIG_SENSORS_ADS1015 is not set
CONFIG_SENSORS_ADS7828=y
# CONFIG_SENSORS_AMC6821 is not set
CONFIG_SENSORS_INA209=y
# CONFIG_SENSORS_INA2XX is not set
CONFIG_SENSORS_INA3221=y
CONFIG_SENSORS_TC74=y
CONFIG_SENSORS_THMC50=y
# CONFIG_SENSORS_TMP102 is not set
CONFIG_SENSORS_TMP103=y
# CONFIG_SENSORS_TMP108 is not set
CONFIG_SENSORS_TMP401=y
CONFIG_SENSORS_TMP421=y
CONFIG_SENSORS_TWL4030_MADC=y
CONFIG_SENSORS_VIA_CPUTEMP=y
# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_VT1211 is not set
# CONFIG_SENSORS_VT8231 is not set
# CONFIG_SENSORS_W83781D is not set
CONFIG_SENSORS_W83791D=y
CONFIG_SENSORS_W83792D=y
# CONFIG_SENSORS_W83793 is not set
CONFIG_SENSORS_W83795=y
# CONFIG_SENSORS_W83795_FANCTRL is not set
CONFIG_SENSORS_W83L785TS=y
CONFIG_SENSORS_W83L786NG=y
CONFIG_SENSORS_W83627HF=y
CONFIG_SENSORS_W83627EHF=y
CONFIG_SENSORS_WM831X=y
CONFIG_SENSORS_WM8350=y

#
# ACPI drivers
#
# CONFIG_SENSORS_ACPI_POWER is not set
# CONFIG_SENSORS_ATK0110 is not set
CONFIG_THERMAL=y
CONFIG_THERMAL_HWMON=y
CONFIG_THERMAL_OF=y
# CONFIG_THERMAL_WRITABLE_TRIPS is not set
CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE=y
# CONFIG_THERMAL_DEFAULT_GOV_FAIR_SHARE is not set
# CONFIG_THERMAL_DEFAULT_GOV_USER_SPACE is not set
# CONFIG_THERMAL_DEFAULT_GOV_POWER_ALLOCATOR is not set
# CONFIG_THERMAL_GOV_FAIR_SHARE is not set
CONFIG_THERMAL_GOV_STEP_WISE=y
# CONFIG_THERMAL_GOV_BANG_BANG is not set
# CONFIG_THERMAL_GOV_USER_SPACE is not set
# CONFIG_THERMAL_GOV_POWER_ALLOCATOR is not set
# CONFIG_CPU_THERMAL is not set
# CONFIG_THERMAL_EMULATION is not set
# CONFIG_QORIQ_THERMAL is not set
# CONFIG_INTEL_POWERCLAMP is not set
# CONFIG_INTEL_SOC_DTS_THERMAL is not set

#
# ACPI INT340X thermal drivers
#
# CONFIG_INT340X_THERMAL is not set
# CONFIG_INTEL_BXT_PMIC_THERMAL is not set
# CONFIG_INTEL_PCH_THERMAL is not set
# CONFIG_GENERIC_ADC_THERMAL is not set
CONFIG_WATCHDOG=y
CONFIG_WATCHDOG_CORE=y
CONFIG_WATCHDOG_NOWAYOUT=y
# CONFIG_WATCHDOG_SYSFS is not set

#
# Watchdog Device Drivers
#
CONFIG_SOFT_WATCHDOG=y
CONFIG_DA9052_WATCHDOG=y
# CONFIG_DA9055_WATCHDOG is not set
# CONFIG_DA9062_WATCHDOG is not set
CONFIG_GPIO_WATCHDOG=y
CONFIG_GPIO_WATCHDOG_ARCH_INITCALL=y
# CONFIG_MENF21BMC_WATCHDOG is not set
# CONFIG_WDAT_WDT is not set
# CONFIG_WM831X_WATCHDOG is not set
# CONFIG_WM8350_WATCHDOG is not set
CONFIG_XILINX_WATCHDOG=y
CONFIG_ZIIRAVE_WATCHDOG=y
# CONFIG_CADENCE_WATCHDOG is not set
CONFIG_DW_WATCHDOG=y
# CONFIG_TWL4030_WATCHDOG is not set
# CONFIG_MAX63XX_WATCHDOG is not set
CONFIG_RETU_WATCHDOG=y
CONFIG_ACQUIRE_WDT=y
CONFIG_ADVANTECH_WDT=y
# CONFIG_ALIM1535_WDT is not set
# CONFIG_ALIM7101_WDT is not set
CONFIG_EBC_C384_WDT=y
# CONFIG_F71808E_WDT is not set
# CONFIG_SP5100_TCO is not set
CONFIG_SBC_FITPC2_WATCHDOG=y
# CONFIG_EUROTECH_WDT is not set
CONFIG_IB700_WDT=y
# CONFIG_IBMASR is not set
CONFIG_WAFER_WDT=y
# CONFIG_I6300ESB_WDT is not set
# CONFIG_IE6XX_WDT is not set
# CONFIG_ITCO_WDT is not set
# CONFIG_IT8712F_WDT is not set
CONFIG_IT87_WDT=y
# CONFIG_HP_WATCHDOG is not set
CONFIG_KEMPLD_WDT=y
CONFIG_SC1200_WDT=y
# CONFIG_SCx200_WDT is not set
# CONFIG_PC87413_WDT is not set
# CONFIG_NV_TCO is not set
# CONFIG_RDC321X_WDT is not set
# CONFIG_60XX_WDT is not set
# CONFIG_SBC8360_WDT is not set
# CONFIG_SBC7240_WDT is not set
CONFIG_CPU5_WDT=y
CONFIG_SMSC_SCH311X_WDT=y
CONFIG_SMSC37B787_WDT=y
# CONFIG_VIA_WDT is not set
CONFIG_W83627HF_WDT=y
CONFIG_W83877F_WDT=y
CONFIG_W83977F_WDT=y
CONFIG_MACHZ_WDT=y
CONFIG_SBC_EPX_C3_WATCHDOG=y
# CONFIG_NI903X_WDT is not set
# CONFIG_NIC7018_WDT is not set
CONFIG_MEN_A21_WDT=y

#
# ISA-based Watchdog Cards
#
# CONFIG_PCWATCHDOG is not set
CONFIG_MIXCOMWD=y
# CONFIG_WDT is not set

#
# PCI-based Watchdog Cards
#
# CONFIG_PCIPCWATCHDOG is not set
# CONFIG_WDTPCI is not set

#
# USB-based Watchdog Cards
#
CONFIG_USBPCWATCHDOG=y

#
# Watchdog Pretimeout Governors
#
# CONFIG_WATCHDOG_PRETIMEOUT_GOV is not set
CONFIG_SSB_POSSIBLE=y

#
# Sonics Silicon Backplane
#
CONFIG_SSB=y
CONFIG_SSB_SPROM=y
CONFIG_SSB_PCIHOST_POSSIBLE=y
CONFIG_SSB_PCIHOST=y
# CONFIG_SSB_B43_PCI_BRIDGE is not set
CONFIG_SSB_SILENT=y
CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y
# CONFIG_SSB_DRIVER_PCICORE is not set
CONFIG_SSB_DRIVER_GPIO=y
CONFIG_BCMA_POSSIBLE=y

#
# Broadcom specific AMBA
#
# CONFIG_BCMA is not set

#
# Multifunction device drivers
#
CONFIG_MFD_CORE=y
# CONFIG_MFD_CS5535 is not set
CONFIG_MFD_ACT8945A=y
CONFIG_MFD_AS3711=y
CONFIG_MFD_AS3722=y
# CONFIG_PMIC_ADP5520 is not set
# CONFIG_MFD_AAT2870_CORE is not set
# CONFIG_MFD_ATMEL_FLEXCOM is not set
CONFIG_MFD_ATMEL_HLCDC=y
# CONFIG_MFD_BCM590XX is not set
CONFIG_MFD_AXP20X=y
CONFIG_MFD_AXP20X_I2C=y
# CONFIG_MFD_CROS_EC is not set
# CONFIG_PMIC_DA903X is not set
CONFIG_PMIC_DA9052=y
CONFIG_MFD_DA9052_I2C=y
CONFIG_MFD_DA9055=y
CONFIG_MFD_DA9062=y
# CONFIG_MFD_DA9063 is not set
CONFIG_MFD_DA9150=y
CONFIG_MFD_DLN2=y
CONFIG_MFD_MC13XXX=y
CONFIG_MFD_MC13XXX_I2C=y
CONFIG_MFD_HI6421_PMIC=y
CONFIG_HTC_PASIC3=y
CONFIG_HTC_I2CPLD=y
# CONFIG_MFD_INTEL_QUARK_I2C_GPIO is not set
# CONFIG_LPC_ICH is not set
# CONFIG_LPC_SCH is not set
CONFIG_INTEL_SOC_PMIC=y
# CONFIG_MFD_INTEL_LPSS_ACPI is not set
# CONFIG_MFD_INTEL_LPSS_PCI is not set
# CONFIG_MFD_JANZ_CMODIO is not set
CONFIG_MFD_KEMPLD=y
CONFIG_MFD_88PM800=y
# CONFIG_MFD_88PM805 is not set
# CONFIG_MFD_88PM860X is not set
# CONFIG_MFD_MAX14577 is not set
# CONFIG_MFD_MAX77620 is not set
CONFIG_MFD_MAX77686=y
CONFIG_MFD_MAX77693=y
# CONFIG_MFD_MAX77843 is not set
CONFIG_MFD_MAX8907=y
CONFIG_MFD_MAX8925=y
CONFIG_MFD_MAX8997=y
CONFIG_MFD_MAX8998=y
CONFIG_MFD_MT6397=y
CONFIG_MFD_MENF21BMC=y
# CONFIG_MFD_VIPERBOARD is not set
CONFIG_MFD_RETU=y
CONFIG_MFD_PCF50633=y
# CONFIG_PCF50633_ADC is not set
CONFIG_PCF50633_GPIO=y
# CONFIG_MFD_RDC321X is not set
# CONFIG_MFD_RTSX_PCI is not set
CONFIG_MFD_RT5033=y
CONFIG_MFD_RTSX_USB=y
CONFIG_MFD_RC5T583=y
CONFIG_MFD_RK808=y
# CONFIG_MFD_RN5T618 is not set
# CONFIG_MFD_SEC_CORE is not set
# CONFIG_MFD_SI476X_CORE is not set
CONFIG_MFD_SM501=y
# CONFIG_MFD_SM501_GPIO is not set
# CONFIG_MFD_SKY81452 is not set
# CONFIG_MFD_SMSC is not set
# CONFIG_ABX500_CORE is not set
# CONFIG_MFD_STMPE is not set
CONFIG_MFD_SYSCON=y
# CONFIG_MFD_TI_AM335X_TSCADC is not set
CONFIG_MFD_LP3943=y
CONFIG_MFD_LP8788=y
CONFIG_MFD_PALMAS=y
CONFIG_TPS6105X=y
# CONFIG_TPS65010 is not set
CONFIG_TPS6507X=y
CONFIG_MFD_TPS65086=y
CONFIG_MFD_TPS65090=y
# CONFIG_MFD_TPS65217 is not set
# CONFIG_MFD_TI_LP873X is not set
CONFIG_MFD_TPS65218=y
CONFIG_MFD_TPS6586X=y
# CONFIG_MFD_TPS65910 is not set
CONFIG_MFD_TPS65912=y
CONFIG_MFD_TPS65912_I2C=y
# CONFIG_MFD_TPS80031 is not set
CONFIG_TWL4030_CORE=y
CONFIG_MFD_TWL4030_AUDIO=y
CONFIG_TWL6040_CORE=y
# CONFIG_MFD_WL1273_CORE is not set
CONFIG_MFD_LM3533=y
# CONFIG_MFD_TIMBERDALE is not set
CONFIG_MFD_TC3589X=y
# CONFIG_MFD_TMIO is not set
# CONFIG_MFD_VX855 is not set
CONFIG_MFD_ARIZONA=y
CONFIG_MFD_ARIZONA_I2C=y
CONFIG_MFD_CS47L24=y
CONFIG_MFD_WM5102=y
CONFIG_MFD_WM5110=y
CONFIG_MFD_WM8997=y
CONFIG_MFD_WM8998=y
# CONFIG_MFD_WM8400 is not set
CONFIG_MFD_WM831X=y
CONFIG_MFD_WM831X_I2C=y
CONFIG_MFD_WM8350=y
CONFIG_MFD_WM8350_I2C=y
CONFIG_MFD_WM8994=y
CONFIG_REGULATOR=y
CONFIG_REGULATOR_DEBUG=y
CONFIG_REGULATOR_FIXED_VOLTAGE=y
CONFIG_REGULATOR_VIRTUAL_CONSUMER=y
CONFIG_REGULATOR_USERSPACE_CONSUMER=y
CONFIG_REGULATOR_88PM800=y
CONFIG_REGULATOR_ACT8865=y
CONFIG_REGULATOR_ACT8945A=y
# CONFIG_REGULATOR_AD5398 is not set
CONFIG_REGULATOR_ANATOP=y
# CONFIG_REGULATOR_AS3711 is not set
CONFIG_REGULATOR_AS3722=y
CONFIG_REGULATOR_AXP20X=y
CONFIG_REGULATOR_DA9052=y
# CONFIG_REGULATOR_DA9055 is not set
# CONFIG_REGULATOR_DA9062 is not set
# CONFIG_REGULATOR_DA9210 is not set
CONFIG_REGULATOR_DA9211=y
CONFIG_REGULATOR_FAN53555=y
# CONFIG_REGULATOR_GPIO is not set
# CONFIG_REGULATOR_HI6421 is not set
# CONFIG_REGULATOR_ISL9305 is not set
CONFIG_REGULATOR_ISL6271A=y
CONFIG_REGULATOR_LP3971=y
# CONFIG_REGULATOR_LP3972 is not set
CONFIG_REGULATOR_LP872X=y
# CONFIG_REGULATOR_LP8755 is not set
CONFIG_REGULATOR_LP8788=y
CONFIG_REGULATOR_LTC3589=y
CONFIG_REGULATOR_LTC3676=y
# CONFIG_REGULATOR_MAX1586 is not set
CONFIG_REGULATOR_MAX8649=y
CONFIG_REGULATOR_MAX8660=y
# CONFIG_REGULATOR_MAX8907 is not set
CONFIG_REGULATOR_MAX8925=y
CONFIG_REGULATOR_MAX8952=y
# CONFIG_REGULATOR_MAX8973 is not set
# CONFIG_REGULATOR_MAX8997 is not set
CONFIG_REGULATOR_MAX8998=y
CONFIG_REGULATOR_MAX77686=y
CONFIG_REGULATOR_MAX77693=y
# CONFIG_REGULATOR_MAX77802 is not set
CONFIG_REGULATOR_MC13XXX_CORE=y
CONFIG_REGULATOR_MC13783=y
CONFIG_REGULATOR_MC13892=y
# CONFIG_REGULATOR_MT6311 is not set
CONFIG_REGULATOR_MT6323=y
# CONFIG_REGULATOR_MT6397 is not set
CONFIG_REGULATOR_PALMAS=y
CONFIG_REGULATOR_PCF50633=y
CONFIG_REGULATOR_PFUZE100=y
# CONFIG_REGULATOR_PV88060 is not set
# CONFIG_REGULATOR_PV88080 is not set
# CONFIG_REGULATOR_PV88090 is not set
CONFIG_REGULATOR_PWM=y
# CONFIG_REGULATOR_RC5T583 is not set
CONFIG_REGULATOR_RK808=y
CONFIG_REGULATOR_RT5033=y
CONFIG_REGULATOR_TPS51632=y
# CONFIG_REGULATOR_TPS6105X is not set
# CONFIG_REGULATOR_TPS62360 is not set
CONFIG_REGULATOR_TPS65023=y
# CONFIG_REGULATOR_TPS6507X is not set
CONFIG_REGULATOR_TPS65086=y
# CONFIG_REGULATOR_TPS65090 is not set
CONFIG_REGULATOR_TPS65218=y
CONFIG_REGULATOR_TPS6586X=y
CONFIG_REGULATOR_TPS65912=y
CONFIG_REGULATOR_TWL4030=y
CONFIG_REGULATOR_WM831X=y
# CONFIG_REGULATOR_WM8350 is not set
CONFIG_REGULATOR_WM8994=y
# CONFIG_MEDIA_SUPPORT is not set

#
# Graphics support
#
# CONFIG_AGP is not set
CONFIG_VGA_ARB=y
CONFIG_VGA_ARB_MAX_GPUS=16
# CONFIG_VGA_SWITCHEROO is not set
# CONFIG_DRM is not set

#
# ACP (Audio CoProcessor) Configuration
#
# CONFIG_DRM_LIB_RANDOM is not set

#
# Frame buffer Devices
#
CONFIG_FB=y
CONFIG_FIRMWARE_EDID=y
CONFIG_FB_CMDLINE=y
CONFIG_FB_NOTIFY=y
# CONFIG_FB_DDC is not set
CONFIG_FB_BOOT_VESA_SUPPORT=y
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
CONFIG_FB_SYS_FILLRECT=y
CONFIG_FB_SYS_COPYAREA=y
CONFIG_FB_SYS_IMAGEBLIT=y
# CONFIG_FB_PROVIDE_GET_FB_UNMAPPED_AREA is not set
CONFIG_FB_FOREIGN_ENDIAN=y
CONFIG_FB_BOTH_ENDIAN=y
# CONFIG_FB_BIG_ENDIAN is not set
# CONFIG_FB_LITTLE_ENDIAN is not set
CONFIG_FB_SYS_FOPS=y
CONFIG_FB_DEFERRED_IO=y
# CONFIG_FB_SVGALIB is not set
# CONFIG_FB_MACMODES is not set
CONFIG_FB_BACKLIGHT=y
CONFIG_FB_MODE_HELPERS=y
CONFIG_FB_TILEBLITTING=y

#
# Frame buffer hardware drivers
#
# CONFIG_FB_CIRRUS is not set
# CONFIG_FB_PM2 is not set
# CONFIG_FB_CYBER2000 is not set
CONFIG_FB_ARC=y
# CONFIG_FB_ASILIANT is not set
# CONFIG_FB_IMSTT is not set
# CONFIG_FB_VGA16 is not set
CONFIG_FB_VESA=y
# CONFIG_FB_N411 is not set
CONFIG_FB_HGA=y
# CONFIG_FB_OPENCORES is not set
CONFIG_FB_S1D13XXX=y
# CONFIG_FB_NVIDIA is not set
# CONFIG_FB_RIVA is not set
# CONFIG_FB_I740 is not set
# CONFIG_FB_LE80578 is not set
# CONFIG_FB_MATROX is not set
# CONFIG_FB_RADEON is not set
# CONFIG_FB_ATY128 is not set
# CONFIG_FB_ATY is not set
# CONFIG_FB_S3 is not set
# CONFIG_FB_SAVAGE is not set
# CONFIG_FB_SIS is not set
# CONFIG_FB_VIA is not set
# CONFIG_FB_NEOMAGIC is not set
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_VT8623 is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_ARK is not set
# CONFIG_FB_PM3 is not set
# CONFIG_FB_CARMINE is not set
# CONFIG_FB_GEODE is not set
CONFIG_FB_SM501=y
# CONFIG_FB_SMSCUFX is not set
CONFIG_FB_UDL=y
CONFIG_FB_IBM_GXT4500=y
# CONFIG_FB_VIRTUAL is not set
CONFIG_FB_METRONOME=y
# CONFIG_FB_MB862XX is not set
CONFIG_FB_BROADSHEET=y
CONFIG_FB_AUO_K190X=y
# CONFIG_FB_AUO_K1900 is not set
# CONFIG_FB_AUO_K1901 is not set
# CONFIG_FB_SIMPLE is not set
CONFIG_FB_SSD1307=y
# CONFIG_FB_SM712 is not set
CONFIG_BACKLIGHT_LCD_SUPPORT=y
CONFIG_LCD_CLASS_DEVICE=y
CONFIG_LCD_PLATFORM=y
CONFIG_BACKLIGHT_CLASS_DEVICE=y
# CONFIG_BACKLIGHT_GENERIC is not set
# CONFIG_BACKLIGHT_LM3533 is not set
CONFIG_BACKLIGHT_PWM=y
CONFIG_BACKLIGHT_DA9052=y
CONFIG_BACKLIGHT_MAX8925=y
# CONFIG_BACKLIGHT_APPLE is not set
# CONFIG_BACKLIGHT_PM8941_WLED is not set
CONFIG_BACKLIGHT_SAHARA=y
CONFIG_BACKLIGHT_WM831X=y
# CONFIG_BACKLIGHT_ADP8860 is not set
CONFIG_BACKLIGHT_ADP8870=y
# CONFIG_BACKLIGHT_PCF50633 is not set
# CONFIG_BACKLIGHT_LM3630A is not set
CONFIG_BACKLIGHT_LM3639=y
CONFIG_BACKLIGHT_LP855X=y
CONFIG_BACKLIGHT_LP8788=y
CONFIG_BACKLIGHT_PANDORA=y
CONFIG_BACKLIGHT_AS3711=y
CONFIG_BACKLIGHT_GPIO=y
CONFIG_BACKLIGHT_LV5207LP=y
CONFIG_BACKLIGHT_BD6107=y
# CONFIG_VGASTATE is not set
# CONFIG_LOGO is not set
# CONFIG_SOUND is not set

#
# HID support
#
CONFIG_HID=y
CONFIG_HID_BATTERY_STRENGTH=y
# CONFIG_HIDRAW is not set
CONFIG_UHID=y
# CONFIG_HID_GENERIC is not set

#
# Special HID drivers
#
CONFIG_HID_A4TECH=y
CONFIG_HID_ACRUX=y
CONFIG_HID_ACRUX_FF=y
CONFIG_HID_APPLE=y
# CONFIG_HID_APPLEIR is not set
CONFIG_HID_ASUS=y
CONFIG_HID_AUREAL=y
# CONFIG_HID_BELKIN is not set
CONFIG_HID_BETOP_FF=y
# CONFIG_HID_CHERRY is not set
CONFIG_HID_CHICONY=y
# CONFIG_HID_CORSAIR is not set
CONFIG_HID_CMEDIA=y
# CONFIG_HID_CP2112 is not set
# CONFIG_HID_CYPRESS is not set
# CONFIG_HID_DRAGONRISE is not set
CONFIG_HID_EMS_FF=y
CONFIG_HID_ELECOM=y
CONFIG_HID_ELO=y
# CONFIG_HID_EZKEY is not set
# CONFIG_HID_GEMBIRD is not set
CONFIG_HID_GFRM=y
CONFIG_HID_HOLTEK=y
# CONFIG_HOLTEK_FF is not set
CONFIG_HID_GT683R=y
CONFIG_HID_KEYTOUCH=y
# CONFIG_HID_KYE is not set
CONFIG_HID_UCLOGIC=y
CONFIG_HID_WALTOP=y
CONFIG_HID_GYRATION=y
CONFIG_HID_ICADE=y
CONFIG_HID_TWINHAN=y
CONFIG_HID_KENSINGTON=y
# CONFIG_HID_LCPOWER is not set
CONFIG_HID_LED=y
CONFIG_HID_LENOVO=y
# CONFIG_HID_LOGITECH is not set
CONFIG_HID_MAGICMOUSE=y
CONFIG_HID_MAYFLASH=y
CONFIG_HID_MICROSOFT=y
CONFIG_HID_MONTEREY=y
CONFIG_HID_MULTITOUCH=y
# CONFIG_HID_NTRIG is not set
# CONFIG_HID_ORTEK is not set
CONFIG_HID_PANTHERLORD=y
CONFIG_PANTHERLORD_FF=y
# CONFIG_HID_PENMOUNT is not set
CONFIG_HID_PETALYNX=y
CONFIG_HID_PICOLCD=y
CONFIG_HID_PICOLCD_FB=y
# CONFIG_HID_PICOLCD_BACKLIGHT is not set
CONFIG_HID_PICOLCD_LCD=y
CONFIG_HID_PICOLCD_LEDS=y
# CONFIG_HID_PLANTRONICS is not set
CONFIG_HID_PRIMAX=y
# CONFIG_HID_ROCCAT is not set
CONFIG_HID_SAITEK=y
CONFIG_HID_SAMSUNG=y
CONFIG_HID_SONY=y
CONFIG_SONY_FF=y
CONFIG_HID_SPEEDLINK=y
# CONFIG_HID_STEELSERIES is not set
CONFIG_HID_SUNPLUS=y
# CONFIG_HID_RMI is not set
CONFIG_HID_GREENASIA=y
CONFIG_GREENASIA_FF=y
CONFIG_HID_SMARTJOYPLUS=y
# CONFIG_SMARTJOYPLUS_FF is not set
CONFIG_HID_TIVO=y
# CONFIG_HID_TOPSEED is not set
CONFIG_HID_THINGM=y
CONFIG_HID_THRUSTMASTER=y
# CONFIG_THRUSTMASTER_FF is not set
CONFIG_HID_UDRAW_PS3=y
# CONFIG_HID_WACOM is not set
# CONFIG_HID_WIIMOTE is not set
CONFIG_HID_XINMO=y
CONFIG_HID_ZEROPLUS=y
CONFIG_ZEROPLUS_FF=y
# CONFIG_HID_ZYDACRON is not set
CONFIG_HID_SENSOR_HUB=y
CONFIG_HID_SENSOR_CUSTOM_SENSOR=y
CONFIG_HID_ALPS=y

#
# USB HID support
#
CONFIG_USB_HID=y
CONFIG_HID_PID=y
# CONFIG_USB_HIDDEV is not set

#
# I2C HID support
#
CONFIG_I2C_HID=y
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_USB_SUPPORT=y
CONFIG_USB_COMMON=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB=y
# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set

#
# Miscellaneous USB options
#
# CONFIG_USB_DEFAULT_PERSIST is not set
CONFIG_USB_DYNAMIC_MINORS=y
# CONFIG_USB_OTG_WHITELIST is not set
CONFIG_USB_OTG_BLACKLIST_HUB=y
CONFIG_USB_MON=y
CONFIG_USB_WUSB=y
CONFIG_USB_WUSB_CBAF=y
CONFIG_USB_WUSB_CBAF_DEBUG=y

#
# USB Host Controller Drivers
#
# CONFIG_USB_C67X00_HCD is not set
# CONFIG_USB_XHCI_HCD is not set
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_ROOT_HUB_TT=y
CONFIG_USB_EHCI_TT_NEWSCHED=y
CONFIG_USB_EHCI_PCI=y
CONFIG_USB_EHCI_HCD_PLATFORM=y
CONFIG_USB_OXU210HP_HCD=y
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_ISP1362_HCD is not set
# CONFIG_USB_FOTG210_HCD is not set
CONFIG_USB_OHCI_HCD=y
CONFIG_USB_OHCI_HCD_PCI=y
# CONFIG_USB_OHCI_HCD_SSB is not set
CONFIG_USB_OHCI_HCD_PLATFORM=y
# CONFIG_USB_UHCI_HCD is not set
CONFIG_USB_SL811_HCD=y
CONFIG_USB_SL811_HCD_ISO=y
CONFIG_USB_R8A66597_HCD=y
# CONFIG_USB_WHCI_HCD is not set
CONFIG_USB_HWA_HCD=y
CONFIG_USB_HCD_SSB=y
CONFIG_USB_HCD_TEST_MODE=y

#
# USB Device Class drivers
#
# CONFIG_USB_ACM is not set
# CONFIG_USB_PRINTER is not set
CONFIG_USB_WDM=y
CONFIG_USB_TMC=y

#
# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#

#
# also be needed; see USB_STORAGE Help for more info
#
CONFIG_USB_STORAGE=y
CONFIG_USB_STORAGE_DEBUG=y
CONFIG_USB_STORAGE_REALTEK=y
CONFIG_USB_STORAGE_DATAFAB=y
# CONFIG_USB_STORAGE_FREECOM is not set
CONFIG_USB_STORAGE_ISD200=y
# CONFIG_USB_STORAGE_USBAT is not set
# CONFIG_USB_STORAGE_SDDR09 is not set
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set
# CONFIG_USB_STORAGE_ALAUDA is not set
# CONFIG_USB_STORAGE_ONETOUCH is not set
CONFIG_USB_STORAGE_KARMA=y
CONFIG_USB_STORAGE_CYPRESS_ATACB=y
# CONFIG_USB_STORAGE_ENE_UB6250 is not set
CONFIG_USB_UAS=y

#
# USB Imaging devices
#
CONFIG_USB_MDC800=y
CONFIG_USB_MICROTEK=y
# CONFIG_USBIP_CORE is not set
CONFIG_USB_MUSB_HDRC=y
# CONFIG_USB_MUSB_HOST is not set
CONFIG_USB_MUSB_GADGET=y
# CONFIG_USB_MUSB_DUAL_ROLE is not set

#
# Platform Glue Layer
#

#
# MUSB DMA mode
#
# CONFIG_MUSB_PIO_ONLY is not set
# CONFIG_USB_DWC3 is not set
CONFIG_USB_DWC2=y
# CONFIG_USB_DWC2_HOST is not set

#
# Gadget/Dual-role mode requires USB Gadget support to be enabled
#
CONFIG_USB_DWC2_PERIPHERAL=y
# CONFIG_USB_DWC2_DUAL_ROLE is not set
# CONFIG_USB_DWC2_PCI is not set
# CONFIG_USB_DWC2_DEBUG is not set
# CONFIG_USB_DWC2_TRACK_MISSED_SOFS is not set
# CONFIG_USB_CHIPIDEA is not set
CONFIG_USB_ISP1760=y
CONFIG_USB_ISP1760_HCD=y
CONFIG_USB_ISP1760_HOST_ROLE=y
# CONFIG_USB_ISP1760_GADGET_ROLE is not set
# CONFIG_USB_ISP1760_DUAL_ROLE is not set

#
# USB port drivers
#
# CONFIG_USB_USS720 is not set
CONFIG_USB_SERIAL=y
CONFIG_USB_SERIAL_CONSOLE=y
CONFIG_USB_SERIAL_GENERIC=y
# CONFIG_USB_SERIAL_SIMPLE is not set
CONFIG_USB_SERIAL_AIRCABLE=y
# CONFIG_USB_SERIAL_ARK3116 is not set
CONFIG_USB_SERIAL_BELKIN=y
# CONFIG_USB_SERIAL_CH341 is not set
# CONFIG_USB_SERIAL_WHITEHEAT is not set
# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
CONFIG_USB_SERIAL_CP210X=y
CONFIG_USB_SERIAL_CYPRESS_M8=y
# CONFIG_USB_SERIAL_EMPEG is not set
CONFIG_USB_SERIAL_FTDI_SIO=y
CONFIG_USB_SERIAL_VISOR=y
CONFIG_USB_SERIAL_IPAQ=y
CONFIG_USB_SERIAL_IR=y
# CONFIG_USB_SERIAL_EDGEPORT is not set
CONFIG_USB_SERIAL_EDGEPORT_TI=y
CONFIG_USB_SERIAL_F81232=y
CONFIG_USB_SERIAL_F8153X=y
# CONFIG_USB_SERIAL_GARMIN is not set
CONFIG_USB_SERIAL_IPW=y
# CONFIG_USB_SERIAL_IUU is not set
# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
CONFIG_USB_SERIAL_KEYSPAN=y
CONFIG_USB_SERIAL_KEYSPAN_MPR=y
# CONFIG_USB_SERIAL_KEYSPAN_USA28 is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA28X is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA28XA is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA28XB is not set
CONFIG_USB_SERIAL_KEYSPAN_USA19=y
# CONFIG_USB_SERIAL_KEYSPAN_USA18X is not set
CONFIG_USB_SERIAL_KEYSPAN_USA19W=y
CONFIG_USB_SERIAL_KEYSPAN_USA19QW=y
# CONFIG_USB_SERIAL_KEYSPAN_USA19QI is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA49W is not set
CONFIG_USB_SERIAL_KEYSPAN_USA49WLC=y
# CONFIG_USB_SERIAL_KLSI is not set
CONFIG_USB_SERIAL_KOBIL_SCT=y
CONFIG_USB_SERIAL_MCT_U232=y
# CONFIG_USB_SERIAL_METRO is not set
# CONFIG_USB_SERIAL_MOS7720 is not set
# CONFIG_USB_SERIAL_MOS7840 is not set
# CONFIG_USB_SERIAL_MXUPORT is not set
# CONFIG_USB_SERIAL_NAVMAN is not set
CONFIG_USB_SERIAL_PL2303=y
CONFIG_USB_SERIAL_OTI6858=y
CONFIG_USB_SERIAL_QCAUX=y
CONFIG_USB_SERIAL_QUALCOMM=y
# CONFIG_USB_SERIAL_SPCP8X5 is not set
CONFIG_USB_SERIAL_SAFE=y
# CONFIG_USB_SERIAL_SAFE_PADDED is not set
CONFIG_USB_SERIAL_SIERRAWIRELESS=y
CONFIG_USB_SERIAL_SYMBOL=y
# CONFIG_USB_SERIAL_TI is not set
CONFIG_USB_SERIAL_CYBERJACK=y
CONFIG_USB_SERIAL_XIRCOM=y
CONFIG_USB_SERIAL_WWAN=y
CONFIG_USB_SERIAL_OPTION=y
# CONFIG_USB_SERIAL_OMNINET is not set
# CONFIG_USB_SERIAL_OPTICON is not set
CONFIG_USB_SERIAL_XSENS_MT=y
CONFIG_USB_SERIAL_WISHBONE=y
CONFIG_USB_SERIAL_SSU100=y
CONFIG_USB_SERIAL_QT2=y
# CONFIG_USB_SERIAL_UPD78F0730 is not set
# CONFIG_USB_SERIAL_DEBUG is not set

#
# USB Miscellaneous drivers
#
CONFIG_USB_EMI62=y
CONFIG_USB_EMI26=y
# CONFIG_USB_ADUTUX is not set
# CONFIG_USB_SEVSEG is not set
# CONFIG_USB_RIO500 is not set
CONFIG_USB_LEGOTOWER=y
# CONFIG_USB_LCD is not set
CONFIG_USB_CYPRESS_CY7C63=y
# CONFIG_USB_CYTHERM is not set
CONFIG_USB_IDMOUSE=y
# CONFIG_USB_FTDI_ELAN is not set
CONFIG_USB_APPLEDISPLAY=y
CONFIG_USB_SISUSBVGA=y
CONFIG_USB_LD=y
CONFIG_USB_TRANCEVIBRATOR=y
# CONFIG_USB_IOWARRIOR is not set
CONFIG_USB_TEST=y
CONFIG_USB_EHSET_TEST_FIXTURE=y
CONFIG_USB_ISIGHTFW=y
# CONFIG_USB_YUREX is not set
CONFIG_USB_EZUSB_FX2=y
CONFIG_USB_HUB_USB251XB=y
CONFIG_USB_HSIC_USB3503=y
CONFIG_USB_HSIC_USB4604=y
# CONFIG_USB_LINK_LAYER_TEST is not set
CONFIG_USB_CHAOSKEY=y
# CONFIG_UCSI is not set

#
# USB Physical Layer drivers
#
CONFIG_USB_PHY=y
CONFIG_NOP_USB_XCEIV=y
CONFIG_USB_GPIO_VBUS=y
CONFIG_TAHVO_USB=y
# CONFIG_TAHVO_USB_HOST_BY_DEFAULT is not set
CONFIG_USB_ISP1301=y
CONFIG_USB_GADGET=y
CONFIG_USB_GADGET_DEBUG=y
# CONFIG_USB_GADGET_VERBOSE is not set
# CONFIG_USB_GADGET_DEBUG_FILES is not set
CONFIG_USB_GADGET_DEBUG_FS=y
CONFIG_USB_GADGET_VBUS_DRAW=2
CONFIG_USB_GADGET_STORAGE_NUM_BUFFERS=2
CONFIG_U_SERIAL_CONSOLE=y

#
# USB Peripheral Controller
#
CONFIG_USB_FUSB300=y
CONFIG_USB_FOTG210_UDC=y
CONFIG_USB_GR_UDC=y
CONFIG_USB_R8A66597=y
# CONFIG_USB_PXA27X is not set
# CONFIG_USB_MV_UDC is not set
CONFIG_USB_MV_U3D=y
CONFIG_USB_M66592=y
CONFIG_USB_BDC_UDC=y

#
# Platform Support
#
CONFIG_USB_BDC_PCI=y
# CONFIG_USB_AMD5536UDC is not set
# CONFIG_USB_NET2272 is not set
# CONFIG_USB_NET2280 is not set
# CONFIG_USB_GOKU is not set
# CONFIG_USB_EG20T is not set
CONFIG_USB_GADGET_XILINX=y
# CONFIG_USB_DUMMY_HCD is not set
CONFIG_USB_LIBCOMPOSITE=y
CONFIG_USB_F_ACM=y
CONFIG_USB_U_SERIAL=y
CONFIG_USB_F_SERIAL=y
CONFIG_USB_F_OBEX=y
CONFIG_USB_F_TCM=y
CONFIG_USB_CONFIGFS=y
# CONFIG_USB_CONFIGFS_SERIAL is not set
# CONFIG_USB_CONFIGFS_ACM is not set
CONFIG_USB_CONFIGFS_OBEX=y
# CONFIG_USB_CONFIGFS_NCM is not set
# CONFIG_USB_CONFIGFS_ECM is not set
# CONFIG_USB_CONFIGFS_ECM_SUBSET is not set
# CONFIG_USB_CONFIGFS_RNDIS is not set
# CONFIG_USB_CONFIGFS_EEM is not set
# CONFIG_USB_CONFIGFS_MASS_STORAGE is not set
# CONFIG_USB_CONFIGFS_F_LB_SS is not set
# CONFIG_USB_CONFIGFS_F_FS is not set
# CONFIG_USB_CONFIGFS_F_HID is not set
# CONFIG_USB_CONFIGFS_F_PRINTER is not set
CONFIG_USB_CONFIGFS_F_TCM=y
# CONFIG_USB_ZERO is not set
# CONFIG_USB_ETH is not set
# CONFIG_USB_G_NCM is not set
# CONFIG_USB_GADGETFS is not set
# CONFIG_USB_FUNCTIONFS is not set
# CONFIG_USB_MASS_STORAGE is not set
# CONFIG_USB_GADGET_TARGET is not set
CONFIG_USB_G_SERIAL=y
# CONFIG_USB_G_PRINTER is not set
# CONFIG_USB_CDC_COMPOSITE is not set
# CONFIG_USB_G_ACM_MS is not set
# CONFIG_USB_G_MULTI is not set
# CONFIG_USB_G_HID is not set
# CONFIG_USB_G_DBGP is not set
CONFIG_USB_ULPI_BUS=y
CONFIG_UWB=y
CONFIG_UWB_HWA=y
# CONFIG_UWB_WHCI is not set
CONFIG_UWB_I1480U=y
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
# CONFIG_LEDS_CLASS_FLASH is not set
# CONFIG_LEDS_BRIGHTNESS_HW_CHANGED is not set

#
# LED drivers
#
CONFIG_LEDS_BCM6328=y
CONFIG_LEDS_BCM6358=y
# CONFIG_LEDS_LM3530 is not set
CONFIG_LEDS_LM3533=y
CONFIG_LEDS_LM3642=y
CONFIG_LEDS_NET48XX=y
# CONFIG_LEDS_WRAP is not set
CONFIG_LEDS_PCA9532=y
# CONFIG_LEDS_PCA9532_GPIO is not set
# CONFIG_LEDS_GPIO is not set
CONFIG_LEDS_LP3944=y
# CONFIG_LEDS_LP3952 is not set
CONFIG_LEDS_LP55XX_COMMON=y
# CONFIG_LEDS_LP5521 is not set
CONFIG_LEDS_LP5523=y
CONFIG_LEDS_LP5562=y
CONFIG_LEDS_LP8501=y
CONFIG_LEDS_LP8788=y
CONFIG_LEDS_LP8860=y
CONFIG_LEDS_CLEVO_MAIL=y
CONFIG_LEDS_PCA955X=y
CONFIG_LEDS_PCA963X=y
# CONFIG_LEDS_WM831X_STATUS is not set
# CONFIG_LEDS_WM8350 is not set
# CONFIG_LEDS_DA9052 is not set
CONFIG_LEDS_PWM=y
CONFIG_LEDS_REGULATOR=y
CONFIG_LEDS_BD2802=y
# CONFIG_LEDS_INTEL_SS4200 is not set
CONFIG_LEDS_LT3593=y
# CONFIG_LEDS_MC13783 is not set
CONFIG_LEDS_TCA6507=y
# CONFIG_LEDS_TLC591XX is not set
# CONFIG_LEDS_MAX8997 is not set
CONFIG_LEDS_LM355x=y
CONFIG_LEDS_OT200=y
CONFIG_LEDS_MENF21BMC=y
CONFIG_LEDS_IS31FL319X=y
CONFIG_LEDS_IS31FL32XX=y

#
# LED driver for blink(1) USB RGB LED is under Special HID drivers (HID_THINGM)
#
CONFIG_LEDS_BLINKM=y
CONFIG_LEDS_SYSCON=y
# CONFIG_LEDS_USER is not set
# CONFIG_LEDS_NIC78BX is not set

#
# LED Triggers
#
# CONFIG_LEDS_TRIGGERS is not set
CONFIG_ACCESSIBILITY=y
CONFIG_EDAC_ATOMIC_SCRUB=y
CONFIG_EDAC_SUPPORT=y
CONFIG_EDAC=y
CONFIG_EDAC_LEGACY_SYSFS=y
# CONFIG_EDAC_DEBUG is not set
CONFIG_EDAC_MM_EDAC=y
# CONFIG_EDAC_AMD76X is not set
# CONFIG_EDAC_E7XXX is not set
# CONFIG_EDAC_E752X is not set
# CONFIG_EDAC_I82875P is not set
# CONFIG_EDAC_I82975X is not set
# CONFIG_EDAC_I3000 is not set
# CONFIG_EDAC_I3200 is not set
# CONFIG_EDAC_IE31200 is not set
# CONFIG_EDAC_X38 is not set
# CONFIG_EDAC_I5400 is not set
# CONFIG_EDAC_I82860 is not set
# CONFIG_EDAC_R82600 is not set
# CONFIG_EDAC_I5000 is not set
# CONFIG_EDAC_I5100 is not set
# CONFIG_EDAC_I7300 is not set
CONFIG_RTC_LIB=y
CONFIG_RTC_MC146818_LIB=y
CONFIG_RTC_CLASS=y
# CONFIG_RTC_HCTOSYS is not set
# CONFIG_RTC_SYSTOHC is not set
# CONFIG_RTC_DEBUG is not set

#
# RTC interfaces
#
CONFIG_RTC_INTF_SYSFS=y
CONFIG_RTC_INTF_PROC=y
CONFIG_RTC_INTF_DEV=y
# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
# CONFIG_RTC_DRV_TEST is not set

#
# I2C RTC drivers
#
CONFIG_RTC_DRV_88PM80X=y
CONFIG_RTC_DRV_ABB5ZES3=y
CONFIG_RTC_DRV_ABX80X=y
CONFIG_RTC_DRV_AS3722=y
CONFIG_RTC_DRV_DS1307=y
CONFIG_RTC_DRV_DS1307_HWMON=y
CONFIG_RTC_DRV_DS1307_CENTURY=y
CONFIG_RTC_DRV_DS1374=y
# CONFIG_RTC_DRV_DS1374_WDT is not set
CONFIG_RTC_DRV_DS1672=y
CONFIG_RTC_DRV_HYM8563=y
CONFIG_RTC_DRV_LP8788=y
# CONFIG_RTC_DRV_MAX6900 is not set
CONFIG_RTC_DRV_MAX8907=y
# CONFIG_RTC_DRV_MAX8925 is not set
CONFIG_RTC_DRV_MAX8998=y
# CONFIG_RTC_DRV_MAX8997 is not set
CONFIG_RTC_DRV_MAX77686=y
# CONFIG_RTC_DRV_RK808 is not set
CONFIG_RTC_DRV_RS5C372=y
CONFIG_RTC_DRV_ISL1208=y
# CONFIG_RTC_DRV_ISL12022 is not set
CONFIG_RTC_DRV_X1205=y
CONFIG_RTC_DRV_PCF8523=y
CONFIG_RTC_DRV_PCF85063=y
CONFIG_RTC_DRV_PCF8563=y
CONFIG_RTC_DRV_PCF8583=y
# CONFIG_RTC_DRV_M41T80 is not set
CONFIG_RTC_DRV_BQ32K=y
# CONFIG_RTC_DRV_TWL4030 is not set
CONFIG_RTC_DRV_PALMAS=y
# CONFIG_RTC_DRV_TPS6586X is not set
CONFIG_RTC_DRV_RC5T583=y
CONFIG_RTC_DRV_S35390A=y
CONFIG_RTC_DRV_FM3130=y
CONFIG_RTC_DRV_RX8010=y
CONFIG_RTC_DRV_RX8581=y
CONFIG_RTC_DRV_RX8025=y
CONFIG_RTC_DRV_EM3027=y
# CONFIG_RTC_DRV_RV8803 is not set

#
# SPI RTC drivers
#
CONFIG_RTC_I2C_AND_SPI=y

#
# SPI and I2C RTC drivers
#
CONFIG_RTC_DRV_DS3232=y
# CONFIG_RTC_DRV_PCF2127 is not set
CONFIG_RTC_DRV_RV3029C2=y
CONFIG_RTC_DRV_RV3029_HWMON=y

#
# Platform RTC drivers
#
# CONFIG_RTC_DRV_CMOS is not set
CONFIG_RTC_DRV_DS1286=y
# CONFIG_RTC_DRV_DS1511 is not set
CONFIG_RTC_DRV_DS1553=y
# CONFIG_RTC_DRV_DS1685_FAMILY is not set
# CONFIG_RTC_DRV_DS1742 is not set
CONFIG_RTC_DRV_DS2404=y
CONFIG_RTC_DRV_DA9052=y
# CONFIG_RTC_DRV_DA9055 is not set
CONFIG_RTC_DRV_DA9063=y
CONFIG_RTC_DRV_STK17TA8=y
CONFIG_RTC_DRV_M48T86=y
CONFIG_RTC_DRV_M48T35=y
# CONFIG_RTC_DRV_M48T59 is not set
CONFIG_RTC_DRV_MSM6242=y
CONFIG_RTC_DRV_BQ4802=y
CONFIG_RTC_DRV_RP5C01=y
CONFIG_RTC_DRV_V3020=y
# CONFIG_RTC_DRV_WM831X is not set
CONFIG_RTC_DRV_WM8350=y
# CONFIG_RTC_DRV_PCF50633 is not set
CONFIG_RTC_DRV_ZYNQMP=y

#
# on-CPU RTC drivers
#
CONFIG_RTC_DRV_MC13XXX=y
CONFIG_RTC_DRV_SNVS=y
CONFIG_RTC_DRV_MT6397=y
CONFIG_RTC_DRV_R7301=y

#
# HID Sensor RTC drivers
#
CONFIG_RTC_DRV_HID_SENSOR_TIME=y
CONFIG_DMADEVICES=y
# CONFIG_DMADEVICES_DEBUG is not set

#
# DMA Devices
#
CONFIG_DMA_ENGINE=y
CONFIG_DMA_VIRTUAL_CHANNELS=y
CONFIG_DMA_ACPI=y
CONFIG_DMA_OF=y
# CONFIG_FSL_EDMA is not set
CONFIG_INTEL_IDMA64=y
# CONFIG_PCH_DMA is not set
CONFIG_QCOM_HIDMA_MGMT=y
CONFIG_QCOM_HIDMA=y
CONFIG_DW_DMAC_CORE=y
CONFIG_DW_DMAC=y
# CONFIG_DW_DMAC_PCI is not set

#
# DMA Clients
#
# CONFIG_ASYNC_TX_DMA is not set
CONFIG_DMATEST=y

#
# DMABUF options
#
CONFIG_SYNC_FILE=y
# CONFIG_SW_SYNC is not set
CONFIG_AUXDISPLAY=y
# CONFIG_KS0108 is not set
CONFIG_IMG_ASCII_LCD=y
CONFIG_HT16K33=y
CONFIG_UIO=y
# CONFIG_UIO_CIF is not set
CONFIG_UIO_PDRV_GENIRQ=y
CONFIG_UIO_DMEM_GENIRQ=y
# CONFIG_UIO_AEC is not set
# CONFIG_UIO_SERCOS3 is not set
# CONFIG_UIO_PCI_GENERIC is not set
# CONFIG_UIO_NETX is not set
# CONFIG_UIO_PRUSS is not set
# CONFIG_UIO_MF624 is not set
# CONFIG_VIRT_DRIVERS is not set

#
# Virtio drivers
#
# CONFIG_VIRTIO_PCI is not set
# CONFIG_VIRTIO_MMIO is not set

#
# Microsoft Hyper-V guest support
#
# CONFIG_HYPERV is not set
# CONFIG_STAGING is not set
CONFIG_X86_PLATFORM_DEVICES=y
# CONFIG_ACERHDF is not set
# CONFIG_ASUS_LAPTOP is not set
CONFIG_DELL_SMBIOS=y
CONFIG_DELL_LAPTOP=y
# CONFIG_DELL_SMO8800 is not set
# CONFIG_FUJITSU_LAPTOP is not set
# CONFIG_FUJITSU_TABLET is not set
# CONFIG_HP_ACCEL is not set
# CONFIG_HP_WIRELESS is not set
# CONFIG_PANASONIC_LAPTOP is not set
# CONFIG_THINKPAD_ACPI is not set
# CONFIG_SENSORS_HDAPS is not set
# CONFIG_INTEL_MENLOW is not set
# CONFIG_ASUS_WIRELESS is not set
# CONFIG_ACPI_WMI is not set
# CONFIG_TOPSTAR_LAPTOP is not set
# CONFIG_TOSHIBA_BT_RFKILL is not set
# CONFIG_TOSHIBA_HAPS is not set
# CONFIG_ACPI_CMPC is not set
# CONFIG_INTEL_HID_EVENT is not set
# CONFIG_INTEL_VBTN is not set
# CONFIG_INTEL_IPS is not set
# CONFIG_INTEL_PMC_CORE is not set
# CONFIG_IBM_RTL is not set
# CONFIG_XO15_EBOOK is not set
# CONFIG_SAMSUNG_LAPTOP is not set
# CONFIG_SAMSUNG_Q10 is not set
# CONFIG_APPLE_GMUX is not set
# CONFIG_INTEL_RST is not set
# CONFIG_INTEL_SMARTCONNECT is not set
# CONFIG_PVPANIC is not set
# CONFIG_INTEL_PMC_IPC is not set
# CONFIG_SURFACE_PRO3_BUTTON is not set
CONFIG_INTEL_PUNIT_IPC=y
CONFIG_MLX_CPLD_PLATFORM=y
# CONFIG_SILEAD_DMI is not set
CONFIG_PMC_ATOM=y
# CONFIG_CHROME_PLATFORMS is not set
CONFIG_CLKDEV_LOOKUP=y
CONFIG_HAVE_CLK_PREPARE=y
CONFIG_COMMON_CLK=y

#
# Common Clock Framework
#
# CONFIG_COMMON_CLK_WM831X is not set
# CONFIG_COMMON_CLK_MAX77686 is not set
# CONFIG_COMMON_CLK_RK808 is not set
# CONFIG_COMMON_CLK_SI5351 is not set
# CONFIG_COMMON_CLK_SI514 is not set
# CONFIG_COMMON_CLK_SI570 is not set
# CONFIG_COMMON_CLK_CDCE706 is not set
# CONFIG_COMMON_CLK_CDCE925 is not set
# CONFIG_COMMON_CLK_CS2000_CP is not set
# CONFIG_CLK_TWL6040 is not set
# CONFIG_COMMON_CLK_NXP is not set
# CONFIG_COMMON_CLK_PALMAS is not set
# CONFIG_COMMON_CLK_PWM is not set
# CONFIG_COMMON_CLK_PXA is not set
# CONFIG_COMMON_CLK_PIC32 is not set
# CONFIG_COMMON_CLK_VC5 is not set

#
# Hardware Spinlock drivers
#

#
# Clock Source drivers
#
CONFIG_CLKSRC_I8253=y
CONFIG_CLKEVT_I8253=y
CONFIG_I8253_LOCK=y
CONFIG_CLKBLD_I8253=y
# CONFIG_ATMEL_PIT is not set
# CONFIG_SH_TIMER_CMT is not set
# CONFIG_SH_TIMER_MTU2 is not set
# CONFIG_SH_TIMER_TMU is not set
# CONFIG_EM_TIMER_STI is not set
# CONFIG_MAILBOX is not set
# CONFIG_IOMMU_SUPPORT is not set

#
# Remoteproc drivers
#
# CONFIG_REMOTEPROC is not set

#
# Rpmsg drivers
#

#
# SOC (System On Chip) specific Drivers
#

#
# Broadcom SoC drivers
#
# CONFIG_SUNXI_SRAM is not set
# CONFIG_SOC_TI is not set
# CONFIG_SOC_ZTE is not set
# CONFIG_PM_DEVFREQ is not set
CONFIG_EXTCON=y

#
# Extcon Device Drivers
#
CONFIG_EXTCON_ADC_JACK=y
CONFIG_EXTCON_AXP288=y
# CONFIG_EXTCON_GPIO is not set
# CONFIG_EXTCON_INTEL_INT3496 is not set
# CONFIG_EXTCON_MAX3355 is not set
CONFIG_EXTCON_MAX77693=y
# CONFIG_EXTCON_MAX8997 is not set
CONFIG_EXTCON_PALMAS=y
CONFIG_EXTCON_QCOM_SPMI_MISC=y
CONFIG_EXTCON_RT8973A=y
CONFIG_EXTCON_SM5502=y
# CONFIG_EXTCON_USB_GPIO is not set
# CONFIG_MEMORY is not set
CONFIG_IIO=y
CONFIG_IIO_BUFFER=y
CONFIG_IIO_BUFFER_CB=y
CONFIG_IIO_KFIFO_BUF=y
CONFIG_IIO_TRIGGERED_BUFFER=y
CONFIG_IIO_CONFIGFS=y
CONFIG_IIO_TRIGGER=y
CONFIG_IIO_CONSUMERS_PER_TRIGGER=2
CONFIG_IIO_SW_DEVICE=y
CONFIG_IIO_SW_TRIGGER=y

#
# Accelerometers
#
CONFIG_BMA180=y
CONFIG_BMC150_ACCEL=y
CONFIG_BMC150_ACCEL_I2C=y
CONFIG_DA280=y
CONFIG_DA311=y
CONFIG_DMARD06=y
CONFIG_DMARD09=y
CONFIG_DMARD10=y
CONFIG_HID_SENSOR_ACCEL_3D=y
# CONFIG_KXSD9 is not set
CONFIG_KXCJK1013=y
CONFIG_MC3230=y
CONFIG_MMA7455=y
CONFIG_MMA7455_I2C=y
CONFIG_MMA7660=y
CONFIG_MMA8452=y
CONFIG_MMA9551_CORE=y
CONFIG_MMA9551=y
CONFIG_MMA9553=y
# CONFIG_MXC4005 is not set
# CONFIG_MXC6255 is not set
CONFIG_STK8312=y
# CONFIG_STK8BA50 is not set

#
# Analog to digital converters
#
# CONFIG_AD7291 is not set
CONFIG_AD799X=y
# CONFIG_AXP288_ADC is not set
# CONFIG_CC10001_ADC is not set
CONFIG_DA9150_GPADC=y
# CONFIG_ENVELOPE_DETECTOR is not set
CONFIG_HX711=y
CONFIG_INA2XX_ADC=y
CONFIG_LP8788_ADC=y
CONFIG_LTC2485=y
# CONFIG_MAX1363 is not set
CONFIG_MCP3422=y
CONFIG_MEN_Z188_ADC=y
CONFIG_NAU7802=y
CONFIG_PALMAS_GPADC=y
CONFIG_STX104=y
CONFIG_TI_ADC081C=y
CONFIG_TI_ADS1015=y
CONFIG_TWL4030_MADC=y
CONFIG_TWL6030_GPADC=y
CONFIG_VF610_ADC=y

#
# Amplifiers
#

#
# Chemical Sensors
#
CONFIG_ATLAS_PH_SENSOR=y
CONFIG_IAQCORE=y
CONFIG_VZ89X=y

#
# Hid Sensor IIO Common
#
CONFIG_HID_SENSOR_IIO_COMMON=y
CONFIG_HID_SENSOR_IIO_TRIGGER=y
CONFIG_IIO_MS_SENSORS_I2C=y

#
# SSP Sensor Common
#
CONFIG_IIO_ST_SENSORS_I2C=y
CONFIG_IIO_ST_SENSORS_CORE=y

#
# Counters
#
CONFIG_104_QUAD_8=y

#
# Digital to analog converters
#
CONFIG_AD5064=y
# CONFIG_AD5380 is not set
CONFIG_AD5446=y
# CONFIG_AD5593R is not set
CONFIG_CIO_DAC=y
CONFIG_DPOT_DAC=y
# CONFIG_M62332 is not set
# CONFIG_MAX517 is not set
CONFIG_MAX5821=y
CONFIG_MCP4725=y
# CONFIG_VF610_DAC is not set

#
# IIO dummy driver
#
CONFIG_IIO_DUMMY_EVGEN=y
CONFIG_IIO_SIMPLE_DUMMY=y
CONFIG_IIO_SIMPLE_DUMMY_EVENTS=y
# CONFIG_IIO_SIMPLE_DUMMY_BUFFER is not set

#
# Frequency Synthesizers DDS/PLL
#

#
# Clock Generator/Distribution
#

#
# Phase-Locked Loop (PLL) frequency synthesizers
#

#
# Digital gyroscope sensors
#
# CONFIG_BMG160 is not set
# CONFIG_HID_SENSOR_GYRO_3D is not set
# CONFIG_MPU3050_I2C is not set
# CONFIG_IIO_ST_GYRO_3AXIS is not set
CONFIG_ITG3200=y

#
# Health Sensors
#

#
# Heart Rate Monitors
#
CONFIG_AFE4404=y
CONFIG_MAX30100=y

#
# Humidity sensors
#
CONFIG_AM2315=y
CONFIG_DHT11=y
CONFIG_HDC100X=y
CONFIG_HTS221=y
CONFIG_HTS221_I2C=y
CONFIG_HTU21=y
# CONFIG_SI7005 is not set
CONFIG_SI7020=y

#
# Inertial measurement units
#
# CONFIG_BMI160_I2C is not set
# CONFIG_KMX61 is not set
# CONFIG_INV_MPU6050_I2C is not set
# CONFIG_IIO_ST_LSM6DSX is not set

#
# Light sensors
#
# CONFIG_ACPI_ALS is not set
CONFIG_ADJD_S311=y
CONFIG_AL3320A=y
CONFIG_APDS9300=y
# CONFIG_APDS9960 is not set
CONFIG_BH1750=y
CONFIG_BH1780=y
CONFIG_CM32181=y
CONFIG_CM3232=y
CONFIG_CM3323=y
# CONFIG_CM3605 is not set
CONFIG_CM36651=y
CONFIG_GP2AP020A00F=y
CONFIG_SENSORS_ISL29018=y
CONFIG_ISL29125=y
CONFIG_HID_SENSOR_ALS=y
# CONFIG_HID_SENSOR_PROX is not set
CONFIG_JSA1212=y
CONFIG_RPR0521=y
CONFIG_SENSORS_LM3533=y
# CONFIG_LTR501 is not set
CONFIG_MAX44000=y
# CONFIG_OPT3001 is not set
CONFIG_PA12203001=y
# CONFIG_SI1145 is not set
# CONFIG_STK3310 is not set
# CONFIG_TCS3414 is not set
CONFIG_TCS3472=y
CONFIG_SENSORS_TSL2563=y
CONFIG_TSL2583=y
# CONFIG_TSL4531 is not set
# CONFIG_US5182D is not set
# CONFIG_VCNL4000 is not set
CONFIG_VEML6070=y

#
# Magnetometer sensors
#
CONFIG_AK8974=y
# CONFIG_AK8975 is not set
# CONFIG_AK09911 is not set
CONFIG_BMC150_MAGN=y
CONFIG_BMC150_MAGN_I2C=y
CONFIG_MAG3110=y
CONFIG_HID_SENSOR_MAGNETOMETER_3D=y
CONFIG_MMC35240=y
CONFIG_IIO_ST_MAGN_3AXIS=y
CONFIG_IIO_ST_MAGN_I2C_3AXIS=y
# CONFIG_SENSORS_HMC5843_I2C is not set

#
# Inclinometer sensors
#
# CONFIG_HID_SENSOR_INCLINOMETER_3D is not set
# CONFIG_HID_SENSOR_DEVICE_ROTATION is not set

#
# Triggers - standalone
#
# CONFIG_IIO_HRTIMER_TRIGGER is not set
# CONFIG_IIO_INTERRUPT_TRIGGER is not set
CONFIG_IIO_TIGHTLOOP_TRIGGER=y
# CONFIG_IIO_SYSFS_TRIGGER is not set

#
# Digital potentiometers
#
CONFIG_DS1803=y
CONFIG_MCP4531=y
CONFIG_TPL0102=y

#
# Digital potentiostats
#
CONFIG_LMP91000=y

#
# Pressure sensors
#
# CONFIG_ABP060MG is not set
CONFIG_BMP280=y
CONFIG_BMP280_I2C=y
CONFIG_HID_SENSOR_PRESS=y
CONFIG_HP03=y
# CONFIG_MPL115_I2C is not set
CONFIG_MPL3115=y
CONFIG_MS5611=y
CONFIG_MS5611_I2C=y
CONFIG_MS5637=y
CONFIG_IIO_ST_PRESS=y
CONFIG_IIO_ST_PRESS_I2C=y
# CONFIG_T5403 is not set
# CONFIG_HP206C is not set
CONFIG_ZPA2326=y
CONFIG_ZPA2326_I2C=y

#
# Lightning sensors
#

#
# Proximity and distance sensors
#
# CONFIG_LIDAR_LITE_V2 is not set
# CONFIG_SX9500 is not set
# CONFIG_SRF08 is not set

#
# Temperature sensors
#
# CONFIG_MLX90614 is not set
# CONFIG_TMP006 is not set
CONFIG_TMP007=y
CONFIG_TSYS01=y
CONFIG_TSYS02D=y
# CONFIG_NTB is not set
# CONFIG_VME_BUS is not set
CONFIG_PWM=y
CONFIG_PWM_SYSFS=y
# CONFIG_PWM_ATMEL_HLCDC_PWM is not set
CONFIG_PWM_CRC=y
CONFIG_PWM_FSL_FTM=y
# CONFIG_PWM_LP3943 is not set
# CONFIG_PWM_LPSS_PCI is not set
# CONFIG_PWM_LPSS_PLATFORM is not set
CONFIG_PWM_PCA9685=y
CONFIG_PWM_TWL=y
# CONFIG_PWM_TWL_LED is not set
CONFIG_IRQCHIP=y
CONFIG_ARM_GIC_MAX_NR=1
CONFIG_IPACK_BUS=y
# CONFIG_BOARD_TPCI200 is not set
CONFIG_SERIAL_IPOCTAL=y
CONFIG_RESET_CONTROLLER=y
# CONFIG_RESET_ATH79 is not set
# CONFIG_RESET_BERLIN is not set
# CONFIG_RESET_LPC18XX is not set
# CONFIG_RESET_MESON is not set
# CONFIG_RESET_PISTACHIO is not set
# CONFIG_RESET_SOCFPGA is not set
# CONFIG_RESET_STM32 is not set
# CONFIG_RESET_SUNXI is not set
CONFIG_TI_SYSCON_RESET=y
# CONFIG_RESET_ZYNQ is not set
# CONFIG_RESET_TEGRA_BPMP is not set
CONFIG_FMC=y
# CONFIG_FMC_FAKEDEV is not set
# CONFIG_FMC_TRIVIAL is not set
# CONFIG_FMC_WRITE_EEPROM is not set
# CONFIG_FMC_CHARDEV is not set

#
# PHY Subsystem
#
CONFIG_GENERIC_PHY=y
# CONFIG_PHY_PXA_28NM_HSIC is not set
# CONFIG_PHY_PXA_28NM_USB2 is not set
CONFIG_BCM_KONA_USB2_PHY=y
CONFIG_PHY_SAMSUNG_USB2=y
# CONFIG_PHY_EXYNOS4210_USB2 is not set
# CONFIG_PHY_EXYNOS4X12_USB2 is not set
# CONFIG_PHY_EXYNOS5250_USB2 is not set
CONFIG_PHY_QCOM_USB_HS=y
CONFIG_PHY_QCOM_USB_HSIC=y
CONFIG_PHY_TUSB1210=y
CONFIG_POWERCAP=y
CONFIG_INTEL_RAPL=y
CONFIG_MCB=y
# CONFIG_MCB_PCI is not set
CONFIG_MCB_LPC=y

#
# Performance monitor support
#
CONFIG_RAS=y
# CONFIG_THUNDERBOLT is not set

#
# Android
#
# CONFIG_ANDROID is not set
CONFIG_DEV_DAX=y
CONFIG_NR_DEV_DAX=32768
CONFIG_NVMEM=y
CONFIG_STM=y
# CONFIG_STM_DUMMY is not set
CONFIG_STM_SOURCE_CONSOLE=y
# CONFIG_STM_SOURCE_HEARTBEAT is not set
# CONFIG_INTEL_TH is not set

#
# FPGA Configuration Support
#
CONFIG_FPGA=y
# CONFIG_FPGA_BRIDGE is not set

#
# FSI support
#
# CONFIG_FSI is not set

#
# Firmware Drivers
#
# CONFIG_EDD is not set
# CONFIG_FIRMWARE_MEMMAP is not set
CONFIG_DELL_RBU=y
CONFIG_DCDBAS=y
CONFIG_DMIID=y
CONFIG_DMI_SYSFS=y
CONFIG_DMI_SCAN_MACHINE_NON_EFI_FALLBACK=y
# CONFIG_ISCSI_IBFT_FIND is not set
# CONFIG_FW_CFG_SYSFS is not set
CONFIG_GOOGLE_FIRMWARE=y

#
# Google Firmware Drivers
#
CONFIG_GOOGLE_MEMCONSOLE=y
# CONFIG_EFI_DEV_PATH_PARSER is not set

#
# Tegra firmware driver
#

#
# File systems
#
CONFIG_DCACHE_WORD_ACCESS=y
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y
# CONFIG_EXT2_FS_SECURITY is not set
CONFIG_EXT3_FS=y
# CONFIG_EXT3_FS_POSIX_ACL is not set
CONFIG_EXT3_FS_SECURITY=y
CONFIG_EXT4_FS=y
CONFIG_EXT4_FS_POSIX_ACL=y
CONFIG_EXT4_FS_SECURITY=y
# CONFIG_EXT4_ENCRYPTION is not set
# CONFIG_EXT4_DEBUG is not set
CONFIG_JBD2=y
# CONFIG_JBD2_DEBUG is not set
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
CONFIG_JFS_FS=y
# CONFIG_JFS_POSIX_ACL is not set
# CONFIG_JFS_SECURITY is not set
# CONFIG_JFS_DEBUG is not set
CONFIG_JFS_STATISTICS=y
# CONFIG_XFS_FS is not set
CONFIG_GFS2_FS=y
# CONFIG_OCFS2_FS is not set
CONFIG_BTRFS_FS=y
CONFIG_BTRFS_FS_POSIX_ACL=y
# CONFIG_BTRFS_FS_CHECK_INTEGRITY is not set
# CONFIG_BTRFS_FS_RUN_SANITY_TESTS is not set
CONFIG_BTRFS_DEBUG=y
# CONFIG_BTRFS_ASSERT is not set
# CONFIG_NILFS2_FS is not set
# CONFIG_F2FS_FS is not set
# CONFIG_FS_DAX is not set
CONFIG_FS_POSIX_ACL=y
CONFIG_EXPORTFS=y
# CONFIG_EXPORTFS_BLOCK_OPS is not set
CONFIG_FILE_LOCKING=y
CONFIG_MANDATORY_FILE_LOCKING=y
# CONFIG_FS_ENCRYPTION is not set
CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_INOTIFY_USER=y
CONFIG_FANOTIFY=y
# CONFIG_QUOTA is not set
# CONFIG_QUOTA_NETLINK_INTERFACE is not set
CONFIG_QUOTACTL=y
CONFIG_AUTOFS4_FS=y
CONFIG_FUSE_FS=y
CONFIG_CUSE=y
# CONFIG_OVERLAY_FS is not set

#
# Caches
#
# CONFIG_FSCACHE is not set

#
# CD-ROM/DVD Filesystems
#
# CONFIG_ISO9660_FS is not set
# CONFIG_UDF_FS is not set

#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
CONFIG_FAT_DEFAULT_UTF8=y
CONFIG_NTFS_FS=y
CONFIG_NTFS_DEBUG=y
# CONFIG_NTFS_RW is not set

#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
# CONFIG_PROC_KCORE is not set
CONFIG_PROC_SYSCTL=y
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_PROC_CHILDREN=y
CONFIG_KERNFS=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_TMPFS_XATTR is not set
# CONFIG_HUGETLBFS is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_CONFIGFS_FS=y
CONFIG_MISC_FILESYSTEMS=y
CONFIG_ORANGEFS_FS=y
CONFIG_ADFS_FS=y
CONFIG_ADFS_FS_RW=y
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
CONFIG_BFS_FS=y
CONFIG_EFS_FS=y
CONFIG_CRAMFS=y
CONFIG_SQUASHFS=y
CONFIG_SQUASHFS_FILE_CACHE=y
# CONFIG_SQUASHFS_FILE_DIRECT is not set
# CONFIG_SQUASHFS_DECOMP_SINGLE is not set
# CONFIG_SQUASHFS_DECOMP_MULTI is not set
CONFIG_SQUASHFS_DECOMP_MULTI_PERCPU=y
CONFIG_SQUASHFS_XATTR=y
CONFIG_SQUASHFS_ZLIB=y
CONFIG_SQUASHFS_LZ4=y
CONFIG_SQUASHFS_LZO=y
# CONFIG_SQUASHFS_XZ is not set
# CONFIG_SQUASHFS_4K_DEVBLK_SIZE is not set
# CONFIG_SQUASHFS_EMBEDDED is not set
CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
CONFIG_VXFS_FS=y
CONFIG_MINIX_FS=y
CONFIG_OMFS_FS=y
CONFIG_HPFS_FS=y
CONFIG_QNX4FS_FS=y
CONFIG_QNX6FS_FS=y
CONFIG_QNX6FS_DEBUG=y
CONFIG_ROMFS_FS=y
CONFIG_ROMFS_BACKED_BY_BLOCK=y
CONFIG_ROMFS_ON_BLOCK=y
CONFIG_PSTORE=y
# CONFIG_PSTORE_ZLIB_COMPRESS is not set
CONFIG_PSTORE_LZO_COMPRESS=y
# CONFIG_PSTORE_LZ4_COMPRESS is not set
CONFIG_PSTORE_CONSOLE=y
# CONFIG_PSTORE_PMSG is not set
# CONFIG_PSTORE_RAM is not set
CONFIG_SYSV_FS=y
# CONFIG_UFS_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
# CONFIG_NLS_CODEPAGE_437 is not set
# CONFIG_NLS_CODEPAGE_737 is not set
CONFIG_NLS_CODEPAGE_775=y
# CONFIG_NLS_CODEPAGE_850 is not set
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
CONFIG_NLS_CODEPAGE_857=y
# CONFIG_NLS_CODEPAGE_860 is not set
CONFIG_NLS_CODEPAGE_861=y
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
CONFIG_NLS_CODEPAGE_865=y
CONFIG_NLS_CODEPAGE_866=y
CONFIG_NLS_CODEPAGE_869=y
CONFIG_NLS_CODEPAGE_936=y
CONFIG_NLS_CODEPAGE_950=y
CONFIG_NLS_CODEPAGE_932=y
# CONFIG_NLS_CODEPAGE_949 is not set
CONFIG_NLS_CODEPAGE_874=y
CONFIG_NLS_ISO8859_8=y
CONFIG_NLS_CODEPAGE_1250=y
CONFIG_NLS_CODEPAGE_1251=y
CONFIG_NLS_ASCII=y
# CONFIG_NLS_ISO8859_1 is not set
# CONFIG_NLS_ISO8859_2 is not set
CONFIG_NLS_ISO8859_3=y
CONFIG_NLS_ISO8859_4=y
# CONFIG_NLS_ISO8859_5 is not set
CONFIG_NLS_ISO8859_6=y
# CONFIG_NLS_ISO8859_7 is not set
CONFIG_NLS_ISO8859_9=y
CONFIG_NLS_ISO8859_13=y
# CONFIG_NLS_ISO8859_14 is not set
CONFIG_NLS_ISO8859_15=y
CONFIG_NLS_KOI8_R=y
# CONFIG_NLS_KOI8_U is not set
# CONFIG_NLS_MAC_ROMAN is not set
# CONFIG_NLS_MAC_CELTIC is not set
# CONFIG_NLS_MAC_CENTEURO is not set
CONFIG_NLS_MAC_CROATIAN=y
# CONFIG_NLS_MAC_CYRILLIC is not set
CONFIG_NLS_MAC_GAELIC=y
# CONFIG_NLS_MAC_GREEK is not set
# CONFIG_NLS_MAC_ICELAND is not set
CONFIG_NLS_MAC_INUIT=y
CONFIG_NLS_MAC_ROMANIAN=y
# CONFIG_NLS_MAC_TURKISH is not set
CONFIG_NLS_UTF8=y

#
# Kernel hacking
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=y

#
# printk and dmesg options
#
CONFIG_PRINTK_TIME=y
CONFIG_CONSOLE_LOGLEVEL_DEFAULT=7
CONFIG_MESSAGE_LOGLEVEL_DEFAULT=4
# CONFIG_BOOT_PRINTK_DELAY is not set
CONFIG_DYNAMIC_DEBUG=y

#
# Compile-time checks and compiler options
#
# CONFIG_DEBUG_INFO is not set
# CONFIG_ENABLE_WARN_DEPRECATED is not set
# CONFIG_ENABLE_MUST_CHECK is not set
CONFIG_FRAME_WARN=1024
# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_READABLE_ASM is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_PAGE_OWNER is not set
CONFIG_DEBUG_FS=y
CONFIG_HEADERS_CHECK=y
CONFIG_DEBUG_SECTION_MISMATCH=y
CONFIG_SECTION_MISMATCH_WARN_ONLY=y
CONFIG_ARCH_WANT_FRAME_POINTERS=y
CONFIG_FRAME_POINTER=y
# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
CONFIG_MAGIC_SYSRQ=y
CONFIG_MAGIC_SYSRQ_DEFAULT_ENABLE=0x1
CONFIG_MAGIC_SYSRQ_SERIAL=y
CONFIG_DEBUG_KERNEL=y

#
# Memory Debugging
#
CONFIG_PAGE_EXTENSION=y
# CONFIG_DEBUG_PAGEALLOC is not set
# CONFIG_PAGE_POISONING is not set
# CONFIG_DEBUG_PAGE_REF is not set
# CONFIG_DEBUG_RODATA_TEST is not set
CONFIG_DEBUG_OBJECTS=y
CONFIG_DEBUG_OBJECTS_SELFTEST=y
CONFIG_DEBUG_OBJECTS_FREE=y
# CONFIG_DEBUG_OBJECTS_TIMERS is not set
# CONFIG_DEBUG_OBJECTS_WORK is not set
# CONFIG_DEBUG_OBJECTS_RCU_HEAD is not set
CONFIG_DEBUG_OBJECTS_PERCPU_COUNTER=y
CONFIG_DEBUG_OBJECTS_ENABLE_DEFAULT=1
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
CONFIG_HAVE_DEBUG_KMEMLEAK=y
# CONFIG_DEBUG_KMEMLEAK is not set
# CONFIG_DEBUG_STACK_USAGE is not set
CONFIG_DEBUG_VM=y
CONFIG_DEBUG_VM_VMACACHE=y
# CONFIG_DEBUG_VM_RB is not set
CONFIG_DEBUG_VM_PGFLAGS=y
CONFIG_ARCH_HAS_DEBUG_VIRTUAL=y
# CONFIG_DEBUG_VIRTUAL is not set
# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_DEBUG_PER_CPU_MAPS is not set
CONFIG_HAVE_DEBUG_STACKOVERFLOW=y
# CONFIG_DEBUG_STACKOVERFLOW is not set
CONFIG_HAVE_ARCH_KMEMCHECK=y
# CONFIG_KMEMCHECK is not set
# CONFIG_DEBUG_SHIRQ is not set

#
# Debug Lockups and Hangs
#
# CONFIG_LOCKUP_DETECTOR is not set
CONFIG_DETECT_HUNG_TASK=y
CONFIG_DEFAULT_HUNG_TASK_TIMEOUT=120
# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
# CONFIG_WQ_WATCHDOG is not set
CONFIG_PANIC_ON_OOPS=y
CONFIG_PANIC_ON_OOPS_VALUE=1
CONFIG_PANIC_TIMEOUT=0
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHED_INFO is not set
# CONFIG_SCHEDSTATS is not set
# CONFIG_SCHED_STACK_END_CHECK is not set
# CONFIG_DEBUG_TIMEKEEPING is not set
# CONFIG_DEBUG_PREEMPT is not set

#
# Lock Debugging (spinlocks, mutexes, etc...)
#
CONFIG_DEBUG_RT_MUTEXES=y
CONFIG_DEBUG_SPINLOCK=y
CONFIG_DEBUG_MUTEXES=y
# CONFIG_DEBUG_WW_MUTEX_SLOWPATH is not set
CONFIG_DEBUG_LOCK_ALLOC=y
CONFIG_PROVE_LOCKING=y
CONFIG_LOCKDEP=y
CONFIG_LOCK_STAT=y
# CONFIG_DEBUG_LOCKDEP is not set
CONFIG_DEBUG_ATOMIC_SLEEP=y
CONFIG_DEBUG_LOCKING_API_SELFTESTS=y
CONFIG_LOCK_TORTURE_TEST=y
CONFIG_WW_MUTEX_SELFTEST=y
CONFIG_TRACE_IRQFLAGS=y
CONFIG_STACKTRACE=y
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_BUGVERBOSE=y
CONFIG_DEBUG_LIST=y
# CONFIG_DEBUG_PI_LIST is not set
CONFIG_DEBUG_SG=y
# CONFIG_DEBUG_NOTIFIERS is not set
# CONFIG_DEBUG_CREDENTIALS is not set

#
# RCU Debugging
#
CONFIG_PROVE_RCU=y
CONFIG_PROVE_RCU_REPEATEDLY=y
# CONFIG_SPARSE_RCU_POINTER is not set
CONFIG_TORTURE_TEST=y
CONFIG_RCU_PERF_TEST=y
# CONFIG_RCU_TORTURE_TEST is not set
CONFIG_RCU_CPU_STALL_TIMEOUT=21
# CONFIG_RCU_TRACE is not set
# CONFIG_RCU_EQS_DEBUG is not set
CONFIG_DEBUG_WQ_FORCE_RR_CPU=y
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
CONFIG_NOTIFIER_ERROR_INJECTION=y
CONFIG_OF_RECONFIG_NOTIFIER_ERROR_INJECT=y
# CONFIG_NETDEV_NOTIFIER_ERROR_INJECT is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
CONFIG_USER_STACKTRACE_SUPPORT=y
CONFIG_NOP_TRACER=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_DYNAMIC_FTRACE_WITH_REGS=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_HAVE_C_RECORDMCOUNT=y
CONFIG_TRACER_MAX_TRACE=y
CONFIG_TRACE_CLOCK=y
CONFIG_RING_BUFFER=y
CONFIG_EVENT_TRACING=y
CONFIG_CONTEXT_SWITCH_TRACER=y
CONFIG_RING_BUFFER_ALLOW_SWAP=y
CONFIG_TRACING=y
CONFIG_GENERIC_TRACER=y
CONFIG_TRACING_SUPPORT=y
CONFIG_FTRACE=y
# CONFIG_FUNCTION_TRACER is not set
CONFIG_IRQSOFF_TRACER=y
# CONFIG_PREEMPT_TRACER is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_HWLAT_TRACER is not set
CONFIG_FTRACE_SYSCALLS=y
CONFIG_TRACER_SNAPSHOT=y
CONFIG_TRACER_SNAPSHOT_PER_CPU_SWAP=y
CONFIG_BRANCH_PROFILE_NONE=y
# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
# CONFIG_PROFILE_ALL_BRANCHES is not set
# CONFIG_STACK_TRACER is not set
CONFIG_BLK_DEV_IO_TRACE=y
# CONFIG_UPROBE_EVENTS is not set
# CONFIG_PROBE_EVENTS is not set
# CONFIG_FTRACE_STARTUP_TEST is not set
# CONFIG_MMIOTRACE is not set
CONFIG_TRACING_MAP=y
CONFIG_HIST_TRIGGERS=y
CONFIG_TRACEPOINT_BENCHMARK=y
CONFIG_RING_BUFFER_BENCHMARK=y
# CONFIG_RING_BUFFER_STARTUP_TEST is not set
# CONFIG_TRACE_ENUM_MAP_FILE is not set
CONFIG_TRACING_EVENTS_GPIO=y

#
# Runtime Testing
#
CONFIG_LKDTM=y
CONFIG_TEST_LIST_SORT=y
CONFIG_TEST_SORT=y
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_RBTREE_TEST is not set
CONFIG_ATOMIC64_SELFTEST=y
# CONFIG_TEST_HEXDUMP is not set
CONFIG_TEST_STRING_HELPERS=y
CONFIG_TEST_KSTRTOX=y
CONFIG_TEST_PRINTF=y
CONFIG_TEST_BITMAP=y
CONFIG_TEST_UUID=y
CONFIG_TEST_RHASHTABLE=y
CONFIG_TEST_HASH=y
# CONFIG_PROVIDE_OHCI1394_DMA_INIT is not set
# CONFIG_DMA_API_DEBUG is not set
# CONFIG_TEST_FIRMWARE is not set
CONFIG_TEST_UDELAY=y
# CONFIG_MEMTEST is not set
CONFIG_BUG_ON_DATA_CORRUPTION=y
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
CONFIG_ARCH_HAS_UBSAN_SANITIZE_ALL=y
# CONFIG_ARCH_WANTS_UBSAN_NO_NULL is not set
CONFIG_UBSAN=y
# CONFIG_UBSAN_SANITIZE_ALL is not set
# CONFIG_UBSAN_ALIGNMENT is not set
CONFIG_UBSAN_NULL=y
CONFIG_ARCH_HAS_DEVMEM_IS_ALLOWED=y
CONFIG_X86_VERBOSE_BOOTUP=y
# CONFIG_EARLY_PRINTK is not set
CONFIG_X86_PTDUMP_CORE=y
CONFIG_X86_PTDUMP=y
CONFIG_DEBUG_WX=y
# CONFIG_DOUBLEFAULT is not set
# CONFIG_DEBUG_TLBFLUSH is not set
CONFIG_IOMMU_STRESS=y
CONFIG_HAVE_MMIOTRACE_SUPPORT=y
CONFIG_IO_DELAY_TYPE_0X80=0
CONFIG_IO_DELAY_TYPE_0XED=1
CONFIG_IO_DELAY_TYPE_UDELAY=2
CONFIG_IO_DELAY_TYPE_NONE=3
# CONFIG_IO_DELAY_0X80 is not set
# CONFIG_IO_DELAY_0XED is not set
CONFIG_IO_DELAY_UDELAY=y
# CONFIG_IO_DELAY_NONE is not set
CONFIG_DEFAULT_IO_DELAY_TYPE=2
CONFIG_DEBUG_BOOT_PARAMS=y
# CONFIG_CPA_DEBUG is not set
CONFIG_OPTIMIZE_INLINING=y
# CONFIG_DEBUG_ENTRY is not set
CONFIG_DEBUG_NMI_SELFTEST=y
# CONFIG_X86_DEBUG_FPU is not set
CONFIG_PUNIT_ATOM_DEBUG=y

#
# Security options
#
# CONFIG_KEYS is not set
CONFIG_SECURITY_DMESG_RESTRICT=y
# CONFIG_SECURITY is not set
CONFIG_SECURITYFS=y
CONFIG_HAVE_HARDENED_USERCOPY_ALLOCATOR=y
CONFIG_HAVE_ARCH_HARDENED_USERCOPY=y
# CONFIG_HARDENED_USERCOPY is not set
CONFIG_STATIC_USERMODEHELPER=y
CONFIG_STATIC_USERMODEHELPER_PATH="/sbin/usermode-helper"
CONFIG_DEFAULT_SECURITY_DAC=y
CONFIG_DEFAULT_SECURITY=""
CONFIG_XOR_BLOCKS=y
CONFIG_CRYPTO=y

#
# Crypto core or helper
#
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD=y
CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_BLKCIPHER=y
CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG=y
CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_RNG_DEFAULT=y
CONFIG_CRYPTO_AKCIPHER2=y
CONFIG_CRYPTO_AKCIPHER=y
CONFIG_CRYPTO_KPP2=y
CONFIG_CRYPTO_KPP=y
CONFIG_CRYPTO_ACOMP2=y
CONFIG_CRYPTO_RSA=y
CONFIG_CRYPTO_DH=y
CONFIG_CRYPTO_ECDH=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_USER is not set
CONFIG_CRYPTO_MANAGER_DISABLE_TESTS=y
CONFIG_CRYPTO_GF128MUL=y
CONFIG_CRYPTO_NULL=y
CONFIG_CRYPTO_NULL2=y
CONFIG_CRYPTO_PCRYPT=y
CONFIG_CRYPTO_WORKQUEUE=y
CONFIG_CRYPTO_CRYPTD=y
# CONFIG_CRYPTO_MCRYPTD is not set
CONFIG_CRYPTO_AUTHENC=y
CONFIG_CRYPTO_ABLK_HELPER=y
CONFIG_CRYPTO_SIMD=y
CONFIG_CRYPTO_GLUE_HELPER_X86=y

#
# Authenticated Encryption with Associated Data
#
CONFIG_CRYPTO_CCM=y
# CONFIG_CRYPTO_GCM is not set
# CONFIG_CRYPTO_CHACHA20POLY1305 is not set
CONFIG_CRYPTO_SEQIV=y
# CONFIG_CRYPTO_ECHAINIV is not set

#
# Block modes
#
CONFIG_CRYPTO_CBC=y
CONFIG_CRYPTO_CTR=y
# CONFIG_CRYPTO_CTS is not set
CONFIG_CRYPTO_ECB=y
CONFIG_CRYPTO_LRW=y
CONFIG_CRYPTO_PCBC=y
CONFIG_CRYPTO_XTS=y
CONFIG_CRYPTO_KEYWRAP=y

#
# Hash modes
#
CONFIG_CRYPTO_CMAC=y
CONFIG_CRYPTO_HMAC=y
# CONFIG_CRYPTO_XCBC is not set
CONFIG_CRYPTO_VMAC=y

#
# Digest
#
CONFIG_CRYPTO_CRC32C=y
CONFIG_CRYPTO_CRC32C_INTEL=y
CONFIG_CRYPTO_CRC32=y
CONFIG_CRYPTO_CRC32_PCLMUL=y
CONFIG_CRYPTO_CRCT10DIF=y
CONFIG_CRYPTO_GHASH=y
# CONFIG_CRYPTO_POLY1305 is not set
CONFIG_CRYPTO_MD4=y
# CONFIG_CRYPTO_MD5 is not set
# CONFIG_CRYPTO_MICHAEL_MIC is not set
CONFIG_CRYPTO_RMD128=y
CONFIG_CRYPTO_RMD160=y
# CONFIG_CRYPTO_RMD256 is not set
# CONFIG_CRYPTO_RMD320 is not set
# CONFIG_CRYPTO_SHA1 is not set
CONFIG_CRYPTO_SHA256=y
CONFIG_CRYPTO_SHA512=y
# CONFIG_CRYPTO_SHA3 is not set
CONFIG_CRYPTO_TGR192=y
# CONFIG_CRYPTO_WP512 is not set

#
# Ciphers
#
CONFIG_CRYPTO_AES=y
CONFIG_CRYPTO_AES_TI=y
CONFIG_CRYPTO_AES_586=y
CONFIG_CRYPTO_AES_NI_INTEL=y
CONFIG_CRYPTO_ANUBIS=y
# CONFIG_CRYPTO_ARC4 is not set
# CONFIG_CRYPTO_BLOWFISH is not set
# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
CONFIG_CRYPTO_DES=y
# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_KHAZAD is not set
CONFIG_CRYPTO_SALSA20=y
CONFIG_CRYPTO_SALSA20_586=y
CONFIG_CRYPTO_CHACHA20=y
CONFIG_CRYPTO_SEED=y
CONFIG_CRYPTO_SERPENT=y
CONFIG_CRYPTO_SERPENT_SSE2_586=y
CONFIG_CRYPTO_TEA=y
# CONFIG_CRYPTO_TWOFISH is not set
# CONFIG_CRYPTO_TWOFISH_586 is not set

#
# Compression
#
CONFIG_CRYPTO_DEFLATE=y
# CONFIG_CRYPTO_LZO is not set
CONFIG_CRYPTO_842=y
CONFIG_CRYPTO_LZ4=y
CONFIG_CRYPTO_LZ4HC=y

#
# Random Number Generation
#
CONFIG_CRYPTO_ANSI_CPRNG=y
CONFIG_CRYPTO_DRBG_MENU=y
CONFIG_CRYPTO_DRBG_HMAC=y
CONFIG_CRYPTO_DRBG_HASH=y
# CONFIG_CRYPTO_DRBG_CTR is not set
CONFIG_CRYPTO_DRBG=y
CONFIG_CRYPTO_JITTERENTROPY=y
# CONFIG_CRYPTO_USER_API_HASH is not set
# CONFIG_CRYPTO_USER_API_SKCIPHER is not set
# CONFIG_CRYPTO_USER_API_RNG is not set
# CONFIG_CRYPTO_USER_API_AEAD is not set
# CONFIG_CRYPTO_HW is not set

#
# Certificates for signature checking
#
CONFIG_HAVE_KVM=y
CONFIG_VIRTUALIZATION=y
# CONFIG_VHOST_NET is not set
CONFIG_VHOST_CROSS_ENDIAN_LEGACY=y
# CONFIG_LGUEST is not set
CONFIG_BINARY_PRINTF=y

#
# Library routines
#
CONFIG_RAID6_PQ=y
CONFIG_BITREVERSE=y
# CONFIG_HAVE_ARCH_BITREVERSE is not set
CONFIG_RATIONAL=y
CONFIG_GENERIC_STRNCPY_FROM_USER=y
CONFIG_GENERIC_STRNLEN_USER=y
CONFIG_GENERIC_NET_UTILS=y
CONFIG_GENERIC_FIND_FIRST_BIT=y
CONFIG_GENERIC_PCI_IOMAP=y
CONFIG_GENERIC_IOMAP=y
CONFIG_GENERIC_IO=y
CONFIG_ARCH_HAS_FAST_MULTIPLIER=y
CONFIG_CRC_CCITT=y
CONFIG_CRC16=y
CONFIG_CRC_T10DIF=y
CONFIG_CRC_ITU_T=y
CONFIG_CRC32=y
CONFIG_CRC32_SELFTEST=y
# CONFIG_CRC32_SLICEBY8 is not set
CONFIG_CRC32_SLICEBY4=y
# CONFIG_CRC32_SARWATE is not set
# CONFIG_CRC32_BIT is not set
CONFIG_CRC7=y
# CONFIG_LIBCRC32C is not set
CONFIG_CRC8=y
# CONFIG_AUDIT_ARCH_COMPAT_GENERIC is not set
CONFIG_RANDOM32_SELFTEST=y
CONFIG_842_COMPRESS=y
CONFIG_842_DECOMPRESS=y
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
CONFIG_LZO_COMPRESS=y
CONFIG_LZO_DECOMPRESS=y
CONFIG_LZ4_COMPRESS=y
CONFIG_LZ4HC_COMPRESS=y
CONFIG_LZ4_DECOMPRESS=y
CONFIG_XZ_DEC=y
CONFIG_XZ_DEC_X86=y
# CONFIG_XZ_DEC_POWERPC is not set
# CONFIG_XZ_DEC_IA64 is not set
CONFIG_XZ_DEC_ARM=y
# CONFIG_XZ_DEC_ARMTHUMB is not set
# CONFIG_XZ_DEC_SPARC is not set
CONFIG_XZ_DEC_BCJ=y
# CONFIG_XZ_DEC_TEST is not set
CONFIG_DECOMPRESS_GZIP=y
CONFIG_DECOMPRESS_BZIP2=y
CONFIG_DECOMPRESS_LZMA=y
CONFIG_DECOMPRESS_XZ=y
CONFIG_DECOMPRESS_LZO=y
CONFIG_DECOMPRESS_LZ4=y
CONFIG_GENERIC_ALLOCATOR=y
CONFIG_RADIX_TREE_MULTIORDER=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT_MAP=y
CONFIG_HAS_DMA=y
# CONFIG_DMA_NOOP_OPS is not set
# CONFIG_DMA_VIRT_OPS is not set
CONFIG_CHECK_SIGNATURE=y
CONFIG_CPU_RMAP=y
CONFIG_DQL=y
CONFIG_GLOB=y
# CONFIG_GLOB_SELFTEST is not set
CONFIG_NLATTR=y
CONFIG_CLZ_TAB=y
# CONFIG_CORDIC is not set
# CONFIG_DDR is not set
CONFIG_IRQ_POLL=y
CONFIG_MPILIB=y
# CONFIG_SG_SPLIT is not set
CONFIG_SG_POOL=y
CONFIG_ARCH_HAS_SG_CHAIN=y
CONFIG_ARCH_HAS_MMIO_FLUSH=y
CONFIG_SBITMAP=y

[-- Attachment #3: job-script --]
[-- Type: text/plain, Size: 3949 bytes --]

#!/bin/sh

export_top_env()
{
	export suite='boot'
	export testcase='boot'
	export timeout='10m'
	export job_origin='/lkp/lkp/src/jobs/boot.yaml'
	export queue='bisect'
	export testbox='vm-lkp-st01-openwrt-ia32-1'
	export tbox_group='vm-lkp-st01-openwrt-ia32'
	export branch='linux-devel/devel-spot-201704180508'
	export commit='ab1218235c09d0fabdea31cbd4f099e7cabccb27'
	export kconfig='i386-randconfig-b0-04180616'
	export submit_id='58fbc7660b9a931a18d348d3'
	export job_file='/lkp/scheduled/vm-lkp-st01-openwrt-ia32-1/boot-1-openwrt-i386-2016-03-16.cgz-ab1218235c09d0fabdea31cbd4f099e7cabccb27-20170423-6680-3gpgeq-0.yaml'
	export id='4165586ac34006549a1215b935fb3a697143bddd'
	export model='qemu-system-x86_64 -enable-kvm'
	export nr_vm=16
	export nr_cpu=1
	export memory='420M'
	export rootfs='openwrt-i386-2016-03-16.cgz'
	export need_kconfig='CONFIG_KVM_GUEST=y'
	export compiler='gcc-5'
	export enqueue_time='2017-04-23 05:13:11 +0800'
	export _id='58fbc7660b9a931a18d348d3'
	export user='lkp'
	export result_root='/result/boot/1/vm-lkp-st01-openwrt-ia32/openwrt-i386-2016-03-16.cgz/i386-randconfig-b0-04180616/gcc-5/ab1218235c09d0fabdea31cbd4f099e7cabccb27/0'
	export LKP_SERVER='inn'
	export max_uptime=600
	export initrd='/osimage/openwrt/openwrt-i386-2016-03-16.cgz'
	export bootloader_append='root=/dev/ram0
user=lkp
job=/lkp/scheduled/vm-lkp-st01-openwrt-ia32-1/boot-1-openwrt-i386-2016-03-16.cgz-ab1218235c09d0fabdea31cbd4f099e7cabccb27-20170423-6680-3gpgeq-0.yaml
ARCH=i386
kconfig=i386-randconfig-b0-04180616
branch=linux-devel/devel-spot-201704180508
commit=ab1218235c09d0fabdea31cbd4f099e7cabccb27
BOOT_IMAGE=/pkg/linux/i386-randconfig-b0-04180616/gcc-5/ab1218235c09d0fabdea31cbd4f099e7cabccb27/vmlinuz-4.11.0-rc2-00217-gab12182
max_uptime=600
RESULT_ROOT=/result/boot/1/vm-lkp-st01-openwrt-ia32/openwrt-i386-2016-03-16.cgz/i386-randconfig-b0-04180616/gcc-5/ab1218235c09d0fabdea31cbd4f099e7cabccb27/0
LKP_SERVER=inn
debug
apic=debug
sysrq_always_enabled
rcupdate.rcu_cpu_stall_timeout=100
net.ifnames=0
printk.devkmsg=on
panic=-1
softlockup_panic=1
nmi_watchdog=panic
oops=panic
load_ramdisk=2
prompt_ramdisk=0
drbd.minor_count=8
systemd.log_level=err
ignore_loglevel
earlyprintk=ttyS0,115200
console=ttyS0,115200
console=tty0
vga=normal
rw'
	export lkp_initrd='/lkp/lkp/lkp-i386.cgz'
	export site='inn'
	export LKP_CGI_PORT=80
	export LKP_CIFS_PORT=139
	export _rt='/result/boot/1/vm-lkp-st01-openwrt-ia32/openwrt-i386-2016-03-16.cgz/i386-randconfig-b0-04180616/gcc-5/ab1218235c09d0fabdea31cbd4f099e7cabccb27'
	export kernel='/pkg/linux/i386-randconfig-b0-04180616/gcc-5/ab1218235c09d0fabdea31cbd4f099e7cabccb27/vmlinuz-4.11.0-rc2-00217-gab12182'
	export dequeue_time='2017-04-23 05:21:13 +0800'
	export job_initrd='/lkp/scheduled/vm-lkp-st01-openwrt-ia32-1/boot-1-openwrt-i386-2016-03-16.cgz-ab1218235c09d0fabdea31cbd4f099e7cabccb27-20170423-6680-3gpgeq-0.cgz'

	[ -n "$LKP_SRC" ] ||
	export LKP_SRC=/lkp/${user:-lkp}/src
}

run_job()
{
	echo $$ > $TMP/run-job.pid

	. $LKP_SRC/lib/http.sh
	. $LKP_SRC/lib/job.sh
	. $LKP_SRC/lib/env.sh

	export_top_env

	run_monitor $LKP_SRC/monitors/one-shot/wrapper boot-slabinfo
	run_monitor $LKP_SRC/monitors/one-shot/wrapper boot-meminfo
	run_monitor $LKP_SRC/monitors/one-shot/wrapper memmap
	run_monitor $LKP_SRC/monitors/wrapper kmsg
	run_monitor $LKP_SRC/monitors/wrapper oom-killer
	run_monitor $LKP_SRC/monitors/plain/watchdog
	run_monitor $LKP_SRC/monitors/wrapper nfs-hang

	run_test $LKP_SRC/tests/wrapper sleep 1
}

extract_stats()
{
	$LKP_SRC/stats/wrapper boot-slabinfo
	$LKP_SRC/stats/wrapper boot-meminfo
	$LKP_SRC/stats/wrapper memmap
	$LKP_SRC/stats/wrapper boot-memory
	$LKP_SRC/stats/wrapper boot-time
	$LKP_SRC/stats/wrapper kernel-size
	$LKP_SRC/stats/wrapper kmsg

	$LKP_SRC/stats/wrapper time sleep.time
	$LKP_SRC/stats/wrapper time
	$LKP_SRC/stats/wrapper dmesg
	$LKP_SRC/stats/wrapper kmsg
	$LKP_SRC/stats/wrapper stderr
	$LKP_SRC/stats/wrapper last_state
}

"$@"

[-- Attachment #4: dmesg.xz --]
[-- Type: application/octet-stream, Size: 11392 bytes --]

[lkp-robot] [sd] ab1218235c: INFO:possible_recursive_locking_detected

[kernel test robot]

[-- Attachment #1: Type: text/plain, Size: 6794 bytes --]


FYI, we noticed the following commit:

commit: ab1218235c09d0fabdea31cbd4f099e7cabccb27 ("sd: Make synchronize cache upon shutdown asynchronous")
url: https://github.com/0day-ci/linux/commits/Bart-Van-Assche/Avoid-that-__scsi_remove_device-hangs/20170418-013958
base: https://git.kernel.org/cgit/linux/kernel/git/jejb/scsi.git for-next

in testcase: boot

on test machine: qemu-system-x86_64 -enable-kvm -m 420M

caused below changes (please refer to attached dmesg/kmsg for entire log/backtrace):


+-----------------------------------------------------------------------------------+------------+------------+
|                                                                                   | b2ba13eb79 | ab1218235c |
+-----------------------------------------------------------------------------------+------------+------------+
| boot_successes                                                                    | 10         | 0          |
| boot_failures                                                                     | 10         | 45         |
| INFO:task_blocked_for_more_than#seconds                                           | 10         | 37         |
| calltrace:debug_show_all_locks                                                    | 6          | 32         |
| calltrace:stress_inorder_work                                                     | 1          | 9          |
| INFO:possible_recursive_locking_detected                                          | 0          | 45         |
| BUG:kernel_hang_in_test_stage                                                     | 0          | 45         |
| INFO:rcu_preempt_detected_stalls_on_CPUs/tasks                                    | 0          | 1          |
| EIP:queued_spin_lock_slowpath                                                     | 0          | 1          |
| INFO:rcu_sched_detected_expedited_stalls_on_CPUs/tasks:{#-...}#jiffies_s:#root:#/ | 0          | 1          |
| INFO:lockdep_is_turned_off                                                        | 0          | 1          |
| calltrace:stress_reorder_work                                                     | 0          | 4          |
| calltrace:pick_next_task_fair                                                     | 0          | 2          |
+-----------------------------------------------------------------------------------+------------+------------+



[  185.305149] [ INFO: possible recursive locking detected ]
[  185.306075] 4.11.0-rc2-00217-gab12182 #1 Not tainted
[  185.306928] ---------------------------------------------
[  185.307854] ksoftirqd/0/6 is trying to acquire lock:
[  185.308712]  (&(&q->__queue_lock)->rlock){..-...}, at: [<b1453433>] blk_put_request+0x33/0x50
[  185.310170] 
[  185.310170] but task is already holding lock:
[  185.311168]  (&(&q->__queue_lock)->rlock){..-...}, at: [<b1616533>] scsi_end_request+0x103/0x1b0
[  185.312666] 
[  185.312666] other info that might help us debug this:
[  185.313777]  Possible unsafe locking scenario:
[  185.313777] 
[  185.314791]        CPU0
[  185.315221]        ----
[  185.315654]   lock(&(&q->__queue_lock)->rlock);
[  185.316432]   lock(&(&q->__queue_lock)->rlock);
[  185.317206] 
[  185.317206]  *** DEADLOCK ***
[  185.317206] 
[  185.318216]  May be due to missing lock nesting notation
[  185.318216] 
[  185.319376] 1 lock held by ksoftirqd/0/6:
[  185.320072]  #0:  (&(&q->__queue_lock)->rlock){..-...}, at: [<b1616533>] scsi_end_request+0x103/0x1b0
[  185.321635] 
[  185.321635] stack backtrace:
[  185.322381] CPU: 0 PID: 6 Comm: ksoftirqd/0 Not tainted 4.11.0-rc2-00217-gab12182 #1
[  185.323698] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.9.3-20161025_171302-gandalf 04/01/2014
[  185.325427] Call Trace:
[  185.325859]  dump_stack+0x76/0xa9
[  185.326440]  __lock_acquire+0x10d2/0x1260
[  185.327132]  lock_acquire+0x8c/0x1f0
[  185.327757]  ? blk_put_request+0x33/0x50
[  185.328455]  _raw_spin_lock_irqsave+0x39/0x70
[  185.329205]  ? blk_put_request+0x33/0x50
[  185.329890]  blk_put_request+0x33/0x50
[  185.330549]  sd_sync_cache_done+0x3e/0x70
[  185.331240]  blk_finish_request+0x60/0x120
[  185.331948]  scsi_end_request+0x10f/0x1b0
[  185.332644]  ? kvm_sched_clock_read+0x9/0x20
[  185.333380]  scsi_io_completion+0x1ac/0x5a0
[  185.334109]  scsi_finish_command+0xa6/0xe0
[  185.334825]  scsi_softirq_done+0xe5/0x100
[  185.335527]  blk_done_softirq+0x7b/0x90
[  185.336190]  __do_softirq+0x190/0x4f0
[  185.336830]  run_ksoftirqd+0x1d/0x70
[  185.337455]  smpboot_thread_fn+0x11a/0x230
[  185.338161]  kthread+0xd9/0x110
[  185.338715]  ? sort_range+0x20/0x20
[  185.339321]  ? __kthread_create_on_node+0x190/0x190
[  185.340170]  ret_from_fork+0x21/0x30

Elapsed time: 1520
BUG: kernel hang in test stage

initrds=(
	/osimage/openwrt/openwrt-i386-2016-03-16.cgz
	/lkp/scheduled/vm-lkp-st01-openwrt-ia32-1/boot-1-openwrt-i386-2016-03-16.cgz-ab1218235c09d0fabdea31cbd4f099e7cabccb27-20170423-6680-3gpgeq-0.cgz
	/lkp/lkp/lkp-i386.cgz
)

cat "${initrds[@]}" > /fs/sda3/initrd-vm-lkp-st01-openwrt-ia32-1

kvm=(
	qemu-system-x86_64
	-enable-kvm
	-kernel /pkg/linux/i386-randconfig-b0-04180616/gcc-5/ab1218235c09d0fabdea31cbd4f099e7cabccb27/vmlinuz-4.11.0-rc2-00217-gab12182
	-initrd /fs/sda3/initrd-vm-lkp-st01-openwrt-ia32-1
	-m 420
	-smp 1
	-device e1000,netdev=net0
	-netdev user,id=net0
	-boot order=nc
	-no-reboot
	-watchdog i6300esb
	-watchdog-action debug
	-rtc base=localtime
	-pidfile /dev/shm/kboot/pid-vm-lkp-st01-openwrt-ia32-1
	-serial file:/dev/shm/kboot/vm-lkp-st01-openwrt-ia32-1/serial
	-serial file:/dev/shm/kboot/vm-lkp-st01-openwrt-ia32-1/kmsg
	-daemonize
	-display none
	-monitor null
)

append=(
	ip=::::vm-lkp-st01-openwrt-ia32-1::dhcp
	root=/dev/ram0
	user=lkp
	job=/lkp/scheduled/vm-lkp-st01-openwrt-ia32-1/boot-1-openwrt-i386-2016-03-16.cgz-ab1218235c09d0fabdea31cbd4f099e7cabccb27-20170423-6680-3gpgeq-0.yaml
	ARCH=i386
	kconfig=i386-randconfig-b0-04180616
	branch=linux-devel/devel-spot-201704180508
	commit=ab1218235c09d0fabdea31cbd4f099e7cabccb27
	BOOT_IMAGE=/pkg/linux/i386-randconfig-b0-04180616/gcc-5/ab1218235c09d0fabdea31cbd4f099e7cabccb27/vmlinuz-4.11.0-rc2-00217-gab12182
	max_uptime=600
	RESULT_ROOT=/result/boot/1/vm-lkp-st01-openwrt-ia32/openwrt-i386-2016-03-16.cgz/i386-randconfig-b0-04180616/gcc-5/ab1218235c09d0fabdea31cbd4f099e7cabccb27/0
	LKP_SERVER=inn
	debug
	apic=debug
	sysrq_always_enabled
	rcupdate.rcu_cpu_stall_timeout=100


To reproduce:

        git clone https://github.com/01org/lkp-tests.git
        cd lkp-tests
        bin/lkp qemu -k <bzImage> job-script  # job-script is attached in this email



Thanks,
Xiaolong

[-- Attachment #2: config-4.11.0-rc2-00217-gab12182 --]
[-- Type: text/plain, Size: 104353 bytes --]

#
# Automatically generated file; DO NOT EDIT.
# Linux/i386 4.11.0-rc2 Kernel Configuration
#
# CONFIG_64BIT is not set
CONFIG_X86_32=y
CONFIG_X86=y
CONFIG_INSTRUCTION_DECODER=y
CONFIG_OUTPUT_FORMAT="elf32-i386"
CONFIG_ARCH_DEFCONFIG="arch/x86/configs/i386_defconfig"
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_MMU=y
CONFIG_ARCH_MMAP_RND_BITS_MIN=8
CONFIG_ARCH_MMAP_RND_BITS_MAX=16
CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MIN=8
CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MAX=16
CONFIG_NEED_SG_DMA_LENGTH=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_ARCH_HAS_CPU_RELAX=y
CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y
CONFIG_HAVE_SETUP_PER_CPU_AREA=y
CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK=y
CONFIG_NEED_PER_CPU_PAGE_FIRST_CHUNK=y
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_ARCH_WANT_HUGE_PMD_SHARE=y
CONFIG_ARCH_WANT_GENERAL_HUGETLB=y
CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_X86_32_SMP=y
CONFIG_X86_32_LAZY_GS=y
CONFIG_ARCH_SUPPORTS_UPROBES=y
CONFIG_FIX_EARLYCON_MEM=y
CONFIG_PGTABLE_LEVELS=2
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
CONFIG_IRQ_WORK=y
CONFIG_BUILDTIME_EXTABLE_SORT=y
CONFIG_THREAD_INFO_IN_TASK=y

#
# General setup
#
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_CROSS_COMPILE=""
# CONFIG_COMPILE_TEST is not set
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
CONFIG_HAVE_KERNEL_GZIP=y
CONFIG_HAVE_KERNEL_BZIP2=y
CONFIG_HAVE_KERNEL_LZMA=y
CONFIG_HAVE_KERNEL_XZ=y
CONFIG_HAVE_KERNEL_LZO=y
CONFIG_HAVE_KERNEL_LZ4=y
# CONFIG_KERNEL_GZIP is not set
# CONFIG_KERNEL_BZIP2 is not set
# CONFIG_KERNEL_LZMA is not set
# CONFIG_KERNEL_XZ is not set
CONFIG_KERNEL_LZO=y
# CONFIG_KERNEL_LZ4 is not set
CONFIG_DEFAULT_HOSTNAME="(none)"
# CONFIG_SWAP is not set
# CONFIG_SYSVIPC is not set
# CONFIG_POSIX_MQUEUE is not set
CONFIG_CROSS_MEMORY_ATTACH=y
CONFIG_FHANDLE=y
CONFIG_USELIB=y
# CONFIG_AUDIT is not set
CONFIG_HAVE_ARCH_AUDITSYSCALL=y

#
# IRQ subsystem
#
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_IRQ_SHOW=y
CONFIG_GENERIC_PENDING_IRQ=y
CONFIG_GENERIC_IRQ_CHIP=y
CONFIG_IRQ_DOMAIN=y
CONFIG_IRQ_DOMAIN_HIERARCHY=y
# CONFIG_IRQ_DOMAIN_DEBUG is not set
CONFIG_IRQ_FORCED_THREADING=y
CONFIG_SPARSE_IRQ=y
CONFIG_CLOCKSOURCE_WATCHDOG=y
CONFIG_ARCH_CLOCKSOURCE_DATA=y
CONFIG_CLOCKSOURCE_VALIDATE_LAST_CYCLE=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
CONFIG_GENERIC_CLOCKEVENTS_MIN_ADJUST=y
CONFIG_GENERIC_CMOS_UPDATE=y

#
# Timers subsystem
#
CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ_COMMON=y
# CONFIG_HZ_PERIODIC is not set
CONFIG_NO_HZ_IDLE=y
CONFIG_NO_HZ=y
# CONFIG_HIGH_RES_TIMERS is not set

#
# CPU/Task time and stats accounting
#
CONFIG_TICK_CPU_ACCOUNTING=y
CONFIG_IRQ_TIME_ACCOUNTING=y
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set

#
# RCU Subsystem
#
CONFIG_PREEMPT_RCU=y
# CONFIG_RCU_EXPERT is not set
CONFIG_SRCU=y
CONFIG_TASKS_RCU=y
CONFIG_RCU_STALL_COMMON=y
# CONFIG_TREE_RCU_TRACE is not set
CONFIG_BUILD_BIN2C=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=17
CONFIG_LOG_CPU_MAX_BUF_SHIFT=12
CONFIG_PRINTK_SAFE_LOG_BUF_SHIFT=13
CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y
CONFIG_ARCH_WANT_BATCHED_UNMAP_TLB_FLUSH=y
CONFIG_CGROUPS=y
CONFIG_PAGE_COUNTER=y
CONFIG_MEMCG=y
# CONFIG_BLK_CGROUP is not set
CONFIG_CGROUP_SCHED=y
CONFIG_FAIR_GROUP_SCHED=y
# CONFIG_CFS_BANDWIDTH is not set
CONFIG_RT_GROUP_SCHED=y
# CONFIG_CGROUP_PIDS is not set
CONFIG_CGROUP_RDMA=y
# CONFIG_CGROUP_FREEZER is not set
# CONFIG_CPUSETS is not set
# CONFIG_CGROUP_DEVICE is not set
# CONFIG_CGROUP_CPUACCT is not set
# CONFIG_CGROUP_PERF is not set
CONFIG_CGROUP_BPF=y
CONFIG_CGROUP_DEBUG=y
CONFIG_SOCK_CGROUP_DATA=y
CONFIG_CHECKPOINT_RESTORE=y
# CONFIG_NAMESPACES is not set
# CONFIG_SCHED_AUTOGROUP is not set
# CONFIG_SYSFS_DEPRECATED is not set
CONFIG_RELAY=y
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_RD_GZIP=y
CONFIG_RD_BZIP2=y
CONFIG_RD_LZMA=y
CONFIG_RD_XZ=y
CONFIG_RD_LZO=y
CONFIG_RD_LZ4=y
CONFIG_INITRAMFS_COMPRESSION=".gz"
CONFIG_CC_OPTIMIZE_FOR_PERFORMANCE=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
CONFIG_ANON_INODES=y
CONFIG_HAVE_UID16=y
CONFIG_SYSCTL_EXCEPTION_TRACE=y
CONFIG_HAVE_PCSPKR_PLATFORM=y
CONFIG_BPF=y
CONFIG_EXPERT=y
CONFIG_UID16=y
CONFIG_MULTIUSER=y
CONFIG_SGETMASK_SYSCALL=y
# CONFIG_SYSFS_SYSCALL is not set
# CONFIG_SYSCTL_SYSCALL is not set
CONFIG_POSIX_TIMERS=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
# CONFIG_KALLSYMS_ABSOLUTE_PERCPU is not set
CONFIG_KALLSYMS_BASE_RELATIVE=y
CONFIG_PRINTK=y
CONFIG_PRINTK_NMI=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_PCSPKR_PLATFORM=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_BPF_SYSCALL=y
CONFIG_SHMEM=y
# CONFIG_AIO is not set
CONFIG_ADVISE_SYSCALLS=y
# CONFIG_USERFAULTFD is not set
CONFIG_PCI_QUIRKS=y
CONFIG_MEMBARRIER=y
# CONFIG_EMBEDDED is not set
CONFIG_HAVE_PERF_EVENTS=y
# CONFIG_PC104 is not set

#
# Kernel Performance Events And Counters
#
CONFIG_PERF_EVENTS=y
# CONFIG_DEBUG_PERF_USE_VMALLOC is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLUB_DEBUG=y
# CONFIG_SLUB_MEMCG_SYSFS_ON is not set
CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
CONFIG_SLAB_FREELIST_RANDOM=y
CONFIG_SLUB_CPU_PARTIAL=y
# CONFIG_SYSTEM_DATA_VERIFICATION is not set
# CONFIG_PROFILING is not set
CONFIG_TRACEPOINTS=y
CONFIG_KEXEC_CORE=y
CONFIG_HAVE_OPROFILE=y
CONFIG_OPROFILE_NMI_TIMER=y
# CONFIG_JUMP_LABEL is not set
# CONFIG_UPROBES is not set
# CONFIG_HAVE_64BIT_ALIGNED_ACCESS is not set
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_ARCH_USE_BUILTIN_BSWAP=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_OPTPROBES=y
CONFIG_HAVE_KPROBES_ON_FTRACE=y
CONFIG_HAVE_NMI=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_DMA_CONTIGUOUS=y
CONFIG_GENERIC_SMP_IDLE_THREAD=y
CONFIG_ARCH_HAS_SET_MEMORY=y
CONFIG_ARCH_WANTS_DYNAMIC_TASK_STRUCT=y
CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
CONFIG_HAVE_CLK=y
CONFIG_HAVE_DMA_API_DEBUG=y
CONFIG_HAVE_HW_BREAKPOINT=y
CONFIG_HAVE_MIXED_BREAKPOINTS_REGS=y
CONFIG_HAVE_USER_RETURN_NOTIFIER=y
CONFIG_HAVE_PERF_EVENTS_NMI=y
CONFIG_HAVE_PERF_REGS=y
CONFIG_HAVE_PERF_USER_STACK_DUMP=y
CONFIG_HAVE_ARCH_JUMP_LABEL=y
CONFIG_ARCH_HAVE_NMI_SAFE_CMPXCHG=y
CONFIG_HAVE_ALIGNED_STRUCT_PAGE=y
CONFIG_HAVE_CMPXCHG_LOCAL=y
CONFIG_HAVE_CMPXCHG_DOUBLE=y
CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
CONFIG_SECCOMP_FILTER=y
CONFIG_HAVE_GCC_PLUGINS=y
# CONFIG_GCC_PLUGINS is not set
CONFIG_HAVE_CC_STACKPROTECTOR=y
# CONFIG_CC_STACKPROTECTOR is not set
CONFIG_CC_STACKPROTECTOR_NONE=y
# CONFIG_CC_STACKPROTECTOR_REGULAR is not set
# CONFIG_CC_STACKPROTECTOR_STRONG is not set
CONFIG_HAVE_ARCH_WITHIN_STACK_FRAMES=y
CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
CONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE=y
CONFIG_MODULES_USE_ELF_REL=y
CONFIG_ARCH_HAS_ELF_RANDOMIZE=y
CONFIG_HAVE_ARCH_MMAP_RND_BITS=y
CONFIG_HAVE_EXIT_THREAD=y
CONFIG_ARCH_MMAP_RND_BITS=8
CONFIG_HAVE_COPY_THREAD_TLS=y
# CONFIG_HAVE_ARCH_HASH is not set
CONFIG_ISA_BUS_API=y
CONFIG_CLONE_BACKWARDS=y
CONFIG_OLD_SIGSUSPEND3=y
CONFIG_OLD_SIGACTION=y
# CONFIG_CPU_NO_EFFICIENT_FFS is not set
# CONFIG_HAVE_ARCH_VMAP_STACK is not set
# CONFIG_ARCH_OPTIONAL_KERNEL_RWX is not set
# CONFIG_ARCH_OPTIONAL_KERNEL_RWX_DEFAULT is not set
CONFIG_ARCH_HAS_STRICT_KERNEL_RWX=y
CONFIG_STRICT_KERNEL_RWX=y
CONFIG_ARCH_HAS_STRICT_MODULE_RWX=y

#
# GCOV-based kernel profiling
#
# CONFIG_GCOV_KERNEL is not set
CONFIG_ARCH_HAS_GCOV_PROFILE_ALL=y
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
CONFIG_BASE_SMALL=0
# CONFIG_MODULES is not set
CONFIG_MODULES_TREE_LOOKUP=y
CONFIG_BLOCK=y
CONFIG_LBDAF=y
CONFIG_BLK_SCSI_REQUEST=y
CONFIG_BLK_DEV_BSG=y
# CONFIG_BLK_DEV_BSGLIB is not set
CONFIG_BLK_DEV_INTEGRITY=y
# CONFIG_BLK_DEV_ZONED is not set
CONFIG_BLK_CMDLINE_PARSER=y
# CONFIG_BLK_WBT is not set
CONFIG_BLK_DEBUG_FS=y
# CONFIG_BLK_SED_OPAL is not set

#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
# CONFIG_ACORN_PARTITION is not set
# CONFIG_AIX_PARTITION is not set
CONFIG_OSF_PARTITION=y
# CONFIG_AMIGA_PARTITION is not set
CONFIG_ATARI_PARTITION=y
CONFIG_MAC_PARTITION=y
CONFIG_MSDOS_PARTITION=y
CONFIG_BSD_DISKLABEL=y
# CONFIG_MINIX_SUBPARTITION is not set
# CONFIG_SOLARIS_X86_PARTITION is not set
CONFIG_UNIXWARE_DISKLABEL=y
# CONFIG_LDM_PARTITION is not set
# CONFIG_SGI_PARTITION is not set
CONFIG_ULTRIX_PARTITION=y
CONFIG_SUN_PARTITION=y
# CONFIG_KARMA_PARTITION is not set
# CONFIG_EFI_PARTITION is not set
# CONFIG_SYSV68_PARTITION is not set
CONFIG_CMDLINE_PARTITION=y
CONFIG_BLK_MQ_PCI=y

#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_DEADLINE=y
# CONFIG_IOSCHED_CFQ is not set
# CONFIG_DEFAULT_DEADLINE is not set
CONFIG_DEFAULT_NOOP=y
CONFIG_DEFAULT_IOSCHED="noop"
CONFIG_MQ_IOSCHED_DEADLINE=y
CONFIG_PADATA=y
CONFIG_ASN1=y
CONFIG_UNINLINE_SPIN_UNLOCK=y
CONFIG_ARCH_SUPPORTS_ATOMIC_RMW=y
CONFIG_MUTEX_SPIN_ON_OWNER=y
CONFIG_RWSEM_SPIN_ON_OWNER=y
CONFIG_LOCK_SPIN_ON_OWNER=y
CONFIG_ARCH_USE_QUEUED_SPINLOCKS=y
CONFIG_QUEUED_SPINLOCKS=y
CONFIG_ARCH_USE_QUEUED_RWLOCKS=y
CONFIG_QUEUED_RWLOCKS=y
# CONFIG_FREEZER is not set

#
# Processor type and features
#
CONFIG_ZONE_DMA=y
CONFIG_SMP=y
CONFIG_X86_FEATURE_NAMES=y
CONFIG_X86_FAST_FEATURE_TESTS=y
CONFIG_X86_MPPARSE=y
CONFIG_X86_BIGSMP=y
# CONFIG_GOLDFISH is not set
CONFIG_INTEL_RDT_A=y
CONFIG_X86_EXTENDED_PLATFORM=y
# CONFIG_X86_GOLDFISH is not set
# CONFIG_X86_INTEL_MID is not set
# CONFIG_X86_INTEL_QUARK is not set
# CONFIG_X86_INTEL_LPSS is not set
# CONFIG_X86_AMD_PLATFORM_DEVICE is not set
CONFIG_IOSF_MBI=y
CONFIG_IOSF_MBI_DEBUG=y
CONFIG_X86_RDC321X=y
CONFIG_X86_32_NON_STANDARD=y
CONFIG_X86_SUPPORTS_MEMORY_FAILURE=y
# CONFIG_STA2X11 is not set
# CONFIG_X86_32_IRIS is not set
# CONFIG_SCHED_OMIT_FRAME_POINTER is not set
CONFIG_HYPERVISOR_GUEST=y
CONFIG_PARAVIRT=y
# CONFIG_PARAVIRT_DEBUG is not set
# CONFIG_PARAVIRT_SPINLOCKS is not set
CONFIG_KVM_GUEST=y
# CONFIG_KVM_DEBUG_FS is not set
# CONFIG_LGUEST_GUEST is not set
# CONFIG_PARAVIRT_TIME_ACCOUNTING is not set
CONFIG_PARAVIRT_CLOCK=y
CONFIG_NO_BOOTMEM=y
# CONFIG_M486 is not set
# CONFIG_M586 is not set
# CONFIG_M586TSC is not set
# CONFIG_M586MMX is not set
# CONFIG_M686 is not set
# CONFIG_MPENTIUMII is not set
# CONFIG_MPENTIUMIII is not set
# CONFIG_MPENTIUMM is not set
# CONFIG_MPENTIUM4 is not set
# CONFIG_MK6 is not set
# CONFIG_MK7 is not set
# CONFIG_MK8 is not set
# CONFIG_MCRUSOE is not set
# CONFIG_MEFFICEON is not set
# CONFIG_MWINCHIPC6 is not set
CONFIG_MWINCHIP3D=y
# CONFIG_MELAN is not set
# CONFIG_MGEODEGX1 is not set
# CONFIG_MGEODE_LX is not set
# CONFIG_MCYRIXIII is not set
# CONFIG_MVIAC3_2 is not set
# CONFIG_MVIAC7 is not set
# CONFIG_MCORE2 is not set
# CONFIG_MATOM is not set
CONFIG_X86_GENERIC=y
CONFIG_X86_INTERNODE_CACHE_SHIFT=6
CONFIG_X86_L1_CACHE_SHIFT=6
CONFIG_X86_ALIGNMENT_16=y
CONFIG_X86_INTEL_USERCOPY=y
CONFIG_X86_USE_PPRO_CHECKSUM=y
CONFIG_X86_TSC=y
CONFIG_X86_MINIMUM_CPU_FAMILY=4
CONFIG_PROCESSOR_SELECT=y
CONFIG_CPU_SUP_INTEL=y
CONFIG_CPU_SUP_CYRIX_32=y
# CONFIG_CPU_SUP_AMD is not set
# CONFIG_CPU_SUP_CENTAUR is not set
# CONFIG_CPU_SUP_TRANSMETA_32 is not set
CONFIG_CPU_SUP_UMC_32=y
CONFIG_HPET_TIMER=y
CONFIG_DMI=y
CONFIG_NR_CPUS=32
CONFIG_SCHED_SMT=y
# CONFIG_SCHED_MC is not set
# CONFIG_PREEMPT_NONE is not set
# CONFIG_PREEMPT_VOLUNTARY is not set
CONFIG_PREEMPT=y
CONFIG_PREEMPT_COUNT=y
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
# CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS is not set
CONFIG_X86_MCE=y
# CONFIG_X86_MCE_INTEL is not set
CONFIG_X86_ANCIENT_MCE=y
# CONFIG_X86_MCE_INJECT is not set

#
# Performance monitoring
#
CONFIG_PERF_EVENTS_INTEL_UNCORE=y
CONFIG_PERF_EVENTS_INTEL_RAPL=y
CONFIG_PERF_EVENTS_INTEL_CSTATE=y
# CONFIG_X86_LEGACY_VM86 is not set
# CONFIG_VM86 is not set
CONFIG_TOSHIBA=y
CONFIG_I8K=y
CONFIG_X86_REBOOTFIXUPS=y
CONFIG_MICROCODE=y
CONFIG_MICROCODE_INTEL=y
# CONFIG_MICROCODE_AMD is not set
CONFIG_MICROCODE_OLD_INTERFACE=y
CONFIG_X86_MSR=y
CONFIG_X86_CPUID=y
CONFIG_NOHIGHMEM=y
# CONFIG_HIGHMEM4G is not set
# CONFIG_HIGHMEM64G is not set
# CONFIG_VMSPLIT_3G is not set
CONFIG_VMSPLIT_3G_OPT=y
# CONFIG_VMSPLIT_2G is not set
# CONFIG_VMSPLIT_2G_OPT is not set
# CONFIG_VMSPLIT_1G is not set
CONFIG_PAGE_OFFSET=0xB0000000
# CONFIG_X86_PAE is not set
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_ILLEGAL_POINTER_VALUE=0
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
CONFIG_SPARSEMEM_STATIC=y
CONFIG_HAVE_MEMBLOCK=y
CONFIG_HAVE_MEMBLOCK_NODE_MAP=y
CONFIG_ARCH_DISCARD_MEMBLOCK=y
# CONFIG_HAVE_BOOTMEM_INFO_NODE is not set
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_COMPACTION=y
CONFIG_MIGRATION=y
# CONFIG_PHYS_ADDR_T_64BIT is not set
# CONFIG_BOUNCE is not set
CONFIG_VIRT_TO_BUS=y
# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_ARCH_SUPPORTS_MEMORY_FAILURE=y
# CONFIG_MEMORY_FAILURE is not set
CONFIG_TRANSPARENT_HUGEPAGE=y
# CONFIG_TRANSPARENT_HUGEPAGE_ALWAYS is not set
CONFIG_TRANSPARENT_HUGEPAGE_MADVISE=y
CONFIG_TRANSPARENT_HUGE_PAGECACHE=y
CONFIG_CLEANCACHE=y
# CONFIG_CMA is not set
CONFIG_ZPOOL=y
CONFIG_ZBUD=y
# CONFIG_Z3FOLD is not set
# CONFIG_ZSMALLOC is not set
CONFIG_GENERIC_EARLY_IOREMAP=y
CONFIG_ARCH_SUPPORTS_DEFERRED_STRUCT_PAGE_INIT=y
CONFIG_IDLE_PAGE_TRACKING=y
CONFIG_X86_CHECK_BIOS_CORRUPTION=y
CONFIG_X86_BOOTPARAM_MEMORY_CORRUPTION_CHECK=y
CONFIG_X86_RESERVE_LOW=64
# CONFIG_MTRR is not set
CONFIG_ARCH_RANDOM=y
CONFIG_X86_SMAP=y
# CONFIG_X86_INTEL_MPX is not set
# CONFIG_EFI is not set
CONFIG_SECCOMP=y
CONFIG_HZ_100=y
# CONFIG_HZ_250 is not set
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=100
# CONFIG_SCHED_HRTICK is not set
CONFIG_KEXEC=y
CONFIG_PHYSICAL_START=0x1000000
# CONFIG_RELOCATABLE is not set
CONFIG_PHYSICAL_ALIGN=0x200000
# CONFIG_HOTPLUG_CPU is not set
CONFIG_COMPAT_VDSO=y
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_MODIFY_LDT_SYSCALL is not set

#
# Power management and ACPI options
#
# CONFIG_SUSPEND is not set
# CONFIG_PM is not set
CONFIG_ACPI=y
CONFIG_ACPI_LEGACY_TABLES_LOOKUP=y
CONFIG_ARCH_MIGHT_HAVE_ACPI_PDC=y
CONFIG_ACPI_SYSTEM_POWER_STATES_SUPPORT=y
# CONFIG_ACPI_DEBUGGER is not set
# CONFIG_ACPI_PROCFS_POWER is not set
CONFIG_ACPI_REV_OVERRIDE_POSSIBLE=y
# CONFIG_ACPI_EC_DEBUGFS is not set
CONFIG_ACPI_AC=y
CONFIG_ACPI_BATTERY=y
CONFIG_ACPI_BUTTON=y
# CONFIG_ACPI_VIDEO is not set
CONFIG_ACPI_FAN=y
# CONFIG_ACPI_DOCK is not set
CONFIG_ACPI_CPU_FREQ_PSS=y
CONFIG_ACPI_PROCESSOR_CSTATE=y
CONFIG_ACPI_PROCESSOR_IDLE=y
CONFIG_ACPI_PROCESSOR=y
# CONFIG_ACPI_PROCESSOR_AGGREGATOR is not set
CONFIG_ACPI_THERMAL=y
CONFIG_ACPI_CUSTOM_DSDT_FILE=""
# CONFIG_ACPI_CUSTOM_DSDT is not set
CONFIG_ARCH_HAS_ACPI_TABLE_UPGRADE=y
CONFIG_ACPI_TABLE_UPGRADE=y
# CONFIG_ACPI_DEBUG is not set
# CONFIG_ACPI_PCI_SLOT is not set
CONFIG_X86_PM_TIMER=y
# CONFIG_ACPI_CONTAINER is not set
CONFIG_ACPI_HOTPLUG_IOAPIC=y
# CONFIG_ACPI_SBS is not set
# CONFIG_ACPI_HED is not set
# CONFIG_ACPI_CUSTOM_METHOD is not set
# CONFIG_ACPI_REDUCED_HARDWARE_ONLY is not set
CONFIG_HAVE_ACPI_APEI=y
CONFIG_HAVE_ACPI_APEI_NMI=y
# CONFIG_ACPI_APEI is not set
# CONFIG_DPTF_POWER is not set
# CONFIG_ACPI_EXTLOG is not set
# CONFIG_PMIC_OPREGION is not set
# CONFIG_ACPI_CONFIGFS is not set
CONFIG_SFI=y

#
# CPU Frequency scaling
#
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_GOV_ATTR_SET=y
CONFIG_CPU_FREQ_GOV_COMMON=y
# CONFIG_CPU_FREQ_STAT is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_SCHEDUTIL is not set
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
CONFIG_CPU_FREQ_GOV_POWERSAVE=y
CONFIG_CPU_FREQ_GOV_USERSPACE=y
CONFIG_CPU_FREQ_GOV_ONDEMAND=y
CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y
# CONFIG_CPU_FREQ_GOV_SCHEDUTIL is not set

#
# CPU frequency scaling drivers
#
# CONFIG_CPUFREQ_DT is not set
CONFIG_X86_INTEL_PSTATE=y
# CONFIG_X86_PCC_CPUFREQ is not set
# CONFIG_X86_ACPI_CPUFREQ is not set
CONFIG_X86_POWERNOW_K6=y
CONFIG_X86_POWERNOW_K7=y
CONFIG_X86_POWERNOW_K7_ACPI=y
# CONFIG_X86_GX_SUSPMOD is not set
CONFIG_X86_SPEEDSTEP_CENTRINO=y
CONFIG_X86_SPEEDSTEP_CENTRINO_TABLE=y
CONFIG_X86_SPEEDSTEP_ICH=y
CONFIG_X86_SPEEDSTEP_SMI=y
# CONFIG_X86_P4_CLOCKMOD is not set
CONFIG_X86_CPUFREQ_NFORCE2=y
# CONFIG_X86_LONGRUN is not set
# CONFIG_X86_LONGHAUL is not set
# CONFIG_X86_E_POWERSAVER is not set

#
# shared options
#
CONFIG_X86_SPEEDSTEP_LIB=y
CONFIG_X86_SPEEDSTEP_RELAXED_CAP_CHECK=y

#
# CPU Idle
#
CONFIG_CPU_IDLE=y
# CONFIG_CPU_IDLE_GOV_LADDER is not set
CONFIG_CPU_IDLE_GOV_MENU=y
# CONFIG_ARCH_NEEDS_CPU_IDLE_COUPLED is not set
# CONFIG_INTEL_IDLE is not set

#
# Bus options (PCI etc.)
#
CONFIG_PCI=y
# CONFIG_PCI_GOBIOS is not set
# CONFIG_PCI_GOMMCONFIG is not set
# CONFIG_PCI_GODIRECT is not set
# CONFIG_PCI_GOOLPC is not set
CONFIG_PCI_GOANY=y
CONFIG_PCI_BIOS=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_MMCONFIG=y
CONFIG_PCI_OLPC=y
CONFIG_PCI_DOMAINS=y
# CONFIG_PCI_CNB20LE_QUIRK is not set
# CONFIG_PCIEPORTBUS is not set
# CONFIG_PCI_MSI is not set
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCI_REALLOC_ENABLE_AUTO is not set
# CONFIG_PCI_STUB is not set
CONFIG_HT_IRQ=y
# CONFIG_PCI_IOV is not set
# CONFIG_PCI_PRI is not set
# CONFIG_PCI_PASID is not set
CONFIG_PCI_LABEL=y
# CONFIG_HOTPLUG_PCI is not set

#
# DesignWare PCI Core Support
#

#
# PCI host controller drivers
#
# CONFIG_ISA_BUS is not set
CONFIG_ISA_DMA_API=y
CONFIG_ISA=y
CONFIG_EISA=y
# CONFIG_EISA_VLB_PRIMING is not set
CONFIG_EISA_PCI_EISA=y
# CONFIG_EISA_VIRTUAL_ROOT is not set
# CONFIG_EISA_NAMES is not set
CONFIG_SCx200=y
CONFIG_SCx200HR_TIMER=y
CONFIG_OLPC=y
# CONFIG_OLPC_XO15_SCI is not set
# CONFIG_ALIX is not set
# CONFIG_NET5501 is not set
# CONFIG_GEOS is not set
# CONFIG_PCCARD is not set
# CONFIG_RAPIDIO is not set
CONFIG_X86_SYSFB=y

#
# Executable file formats / Emulations
#
CONFIG_BINFMT_ELF=y
CONFIG_ELFCORE=y
CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y
CONFIG_BINFMT_SCRIPT=y
CONFIG_HAVE_AOUT=y
# CONFIG_BINFMT_AOUT is not set
CONFIG_BINFMT_MISC=y
CONFIG_COREDUMP=y
CONFIG_COMPAT_32=y
CONFIG_HAVE_ATOMIC_IOMAP=y
CONFIG_NET=y

#
# Networking options
#
# CONFIG_PACKET is not set
CONFIG_UNIX=y
# CONFIG_UNIX_DIAG is not set
# CONFIG_NET_KEY is not set
# CONFIG_INET is not set
# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NET_PTP_CLASSIFY is not set
# CONFIG_NETWORK_PHY_TIMESTAMPING is not set
# CONFIG_NETFILTER is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_PHONET is not set
# CONFIG_IEEE802154 is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
# CONFIG_BATMAN_ADV is not set
# CONFIG_VSOCKETS is not set
# CONFIG_NETLINK_DIAG is not set
# CONFIG_MPLS is not set
# CONFIG_HSR is not set
CONFIG_RPS=y
CONFIG_RFS_ACCEL=y
CONFIG_XPS=y
# CONFIG_CGROUP_NET_PRIO is not set
# CONFIG_CGROUP_NET_CLASSID is not set
CONFIG_NET_RX_BUSY_POLL=y
CONFIG_BQL=y
CONFIG_NET_FLOW_LIMIT=y

#
# Network testing
#
# CONFIG_HAMRADIO is not set
# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_STREAM_PARSER is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
# CONFIG_LIB80211 is not set

#
# CFG80211 needs to be enabled for MAC80211
#
CONFIG_MAC80211_STA_HASH_MAX_SIZE=0
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# CONFIG_CAIF is not set
# CONFIG_NFC is not set
# CONFIG_PSAMPLE is not set
# CONFIG_NET_IFE is not set
# CONFIG_LWTUNNEL is not set
# CONFIG_DST_CACHE is not set
# CONFIG_GRO_CELLS is not set
# CONFIG_NET_DEVLINK is not set
CONFIG_MAY_USE_DEVLINK=y

#
# Device Drivers
#

#
# Generic Driver Options
#
CONFIG_UEVENT_HELPER=y
CONFIG_UEVENT_HELPER_PATH=""
CONFIG_DEVTMPFS=y
# CONFIG_DEVTMPFS_MOUNT is not set
# CONFIG_STANDALONE is not set
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
CONFIG_FIRMWARE_IN_KERNEL=y
CONFIG_EXTRA_FIRMWARE=""
CONFIG_FW_LOADER_USER_HELPER=y
# CONFIG_FW_LOADER_USER_HELPER_FALLBACK is not set
# CONFIG_ALLOW_DEV_COREDUMP is not set
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not set
CONFIG_DEBUG_TEST_DRIVER_REMOVE=y
# CONFIG_SYS_HYPERVISOR is not set
# CONFIG_GENERIC_CPU_DEVICES is not set
CONFIG_GENERIC_CPU_AUTOPROBE=y
CONFIG_REGMAP=y
CONFIG_REGMAP_I2C=y
CONFIG_REGMAP_MMIO=y
CONFIG_REGMAP_IRQ=y
CONFIG_DMA_SHARED_BUFFER=y
CONFIG_DMA_FENCE_TRACE=y

#
# Bus devices
#
# CONFIG_CONNECTOR is not set
# CONFIG_MTD is not set
CONFIG_OF=y
# CONFIG_OF_UNITTEST is not set
CONFIG_OF_PROMTREE=y
CONFIG_OF_DYNAMIC=y
CONFIG_OF_ADDRESS=y
CONFIG_OF_ADDRESS_PCI=y
CONFIG_OF_IRQ=y
CONFIG_OF_PCI=y
CONFIG_OF_PCI_IRQ=y
CONFIG_OF_RESOLVE=y
CONFIG_OF_OVERLAY=y
CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
CONFIG_PARPORT=y
CONFIG_PARPORT_PC=y
# CONFIG_PARPORT_SERIAL is not set
# CONFIG_PARPORT_PC_FIFO is not set
CONFIG_PARPORT_PC_SUPERIO=y
# CONFIG_PARPORT_GSC is not set
CONFIG_PARPORT_AX88796=y
# CONFIG_PARPORT_1284 is not set
CONFIG_PARPORT_NOT_PC=y
CONFIG_PNP=y
CONFIG_PNP_DEBUG_MESSAGES=y

#
# Protocols
#
# CONFIG_ISAPNP is not set
# CONFIG_PNPBIOS is not set
CONFIG_PNPACPI=y
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_NULL_BLK is not set
CONFIG_BLK_DEV_FD=y
# CONFIG_PARIDE is not set
# CONFIG_BLK_DEV_PCIESSD_MTIP32XX is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
# CONFIG_BLK_DEV_LOOP is not set

#
# DRBD disabled because PROC_FS or INET not selected
#
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_RAM is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
CONFIG_BLK_DEV_HD=y
# CONFIG_BLK_DEV_RSXX is not set
CONFIG_NVME_CORE=y
# CONFIG_BLK_DEV_NVME is not set
# CONFIG_BLK_DEV_NVME_SCSI is not set
CONFIG_NVME_FABRICS=y
CONFIG_NVME_FC=y
# CONFIG_NVME_TARGET is not set

#
# Misc devices
#
CONFIG_SENSORS_LIS3LV02D=y
CONFIG_AD525X_DPOT=y
CONFIG_AD525X_DPOT_I2C=y
CONFIG_DUMMY_IRQ=y
# CONFIG_IBM_ASM is not set
# CONFIG_PHANTOM is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
CONFIG_ICS932S401=y
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
CONFIG_APDS9802ALS=y
CONFIG_ISL29003=y
CONFIG_ISL29020=y
CONFIG_SENSORS_TSL2550=y
CONFIG_SENSORS_BH1770=y
CONFIG_SENSORS_APDS990X=y
CONFIG_HMC6352=y
CONFIG_DS1682=y
# CONFIG_PCH_PHUB is not set
# CONFIG_USB_SWITCH_FSA9480 is not set
# CONFIG_SRAM is not set
CONFIG_PANEL=y
CONFIG_PANEL_PARPORT=0
CONFIG_PANEL_PROFILE=5
CONFIG_PANEL_CHANGE_MESSAGE=y
CONFIG_PANEL_BOOT_MESSAGE=""
CONFIG_C2PORT=y
CONFIG_C2PORT_DURAMAR_2150=y

#
# EEPROM support
#
CONFIG_EEPROM_AT24=y
CONFIG_EEPROM_LEGACY=y
CONFIG_EEPROM_MAX6875=y
CONFIG_EEPROM_93CX6=y
CONFIG_EEPROM_IDT_89HPESX=y
# CONFIG_CB710_CORE is not set

#
# Texas Instruments shared transport line discipline
#
# CONFIG_TI_ST is not set
CONFIG_SENSORS_LIS3_I2C=y

#
# Altera FPGA firmware download module
#
CONFIG_ALTERA_STAPL=y
# CONFIG_INTEL_MEI is not set
# CONFIG_INTEL_MEI_ME is not set
# CONFIG_INTEL_MEI_TXE is not set
# CONFIG_VMWARE_VMCI is not set

#
# Intel MIC Bus Driver
#

#
# SCIF Bus Driver
#

#
# VOP Bus Driver
#

#
# Intel MIC Host Driver
#

#
# Intel MIC Card Driver
#

#
# SCIF Driver
#

#
# Intel MIC Coprocessor State Management (COSM) Drivers
#

#
# VOP Driver
#
CONFIG_ECHO=y
# CONFIG_CXL_BASE is not set
# CONFIG_CXL_AFU_DRIVER_OPS is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set

#
# SCSI device support
#
CONFIG_SCSI_MOD=y
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
# CONFIG_SCSI_NETLINK is not set
# CONFIG_SCSI_MQ_DEFAULT is not set
CONFIG_SCSI_PROC_FS=y

#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
CONFIG_CHR_DEV_ST=y
CONFIG_CHR_DEV_OSST=y
# CONFIG_BLK_DEV_SR is not set
CONFIG_CHR_DEV_SG=y
CONFIG_CHR_DEV_SCH=y
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set
# CONFIG_SCSI_SCAN_ASYNC is not set

#
# SCSI Transports
#
CONFIG_SCSI_SPI_ATTRS=y
# CONFIG_SCSI_FC_ATTRS is not set
# CONFIG_SCSI_ISCSI_ATTRS is not set
CONFIG_SCSI_SAS_ATTRS=y
CONFIG_SCSI_SAS_LIBSAS=y
# CONFIG_SCSI_SAS_HOST_SMP is not set
# CONFIG_SCSI_SRP_ATTRS is not set
CONFIG_SCSI_LOWLEVEL=y
CONFIG_ISCSI_BOOT_SYSFS=y
# CONFIG_SCSI_BNX2_ISCSI is not set
# CONFIG_BE2ISCSI is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_HPSA is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_3W_SAS is not set
# CONFIG_SCSI_ACARD is not set
CONFIG_SCSI_AHA152X=y
CONFIG_SCSI_AHA1542=y
CONFIG_SCSI_AHA1740=y
# CONFIG_SCSI_AACRAID is not set
CONFIG_SCSI_AIC7XXX=y
CONFIG_AIC7XXX_CMDS_PER_DEVICE=32
CONFIG_AIC7XXX_RESET_DELAY_MS=5000
CONFIG_AIC7XXX_DEBUG_ENABLE=y
CONFIG_AIC7XXX_DEBUG_MASK=0
CONFIG_AIC7XXX_REG_PRETTY_PRINT=y
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_AIC94XX is not set
# CONFIG_SCSI_MVSAS is not set
# CONFIG_SCSI_MVUMI is not set
# CONFIG_SCSI_DPT_I2O is not set
CONFIG_SCSI_ADVANSYS=y
# CONFIG_SCSI_ARCMSR is not set
# CONFIG_SCSI_ESAS2R is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
# CONFIG_SCSI_MPT3SAS is not set
# CONFIG_SCSI_MPT2SAS is not set
# CONFIG_SCSI_SMARTPQI is not set
# CONFIG_SCSI_UFSHCD is not set
# CONFIG_SCSI_HPTIOP is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_VMWARE_PVSCSI is not set
# CONFIG_SCSI_SNIC is not set
# CONFIG_SCSI_DMX3191D is not set
CONFIG_SCSI_EATA=y
CONFIG_SCSI_EATA_TAGGED_QUEUE=y
# CONFIG_SCSI_EATA_LINKED_COMMANDS is not set
CONFIG_SCSI_EATA_MAX_TAGS=16
CONFIG_SCSI_FUTURE_DOMAIN=y
CONFIG_SCSI_GDTH=y
# CONFIG_SCSI_ISCI is not set
CONFIG_SCSI_GENERIC_NCR5380=y
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
CONFIG_SCSI_PPA=y
CONFIG_SCSI_IMM=y
CONFIG_SCSI_IZIP_EPP16=y
# CONFIG_SCSI_IZIP_SLOW_CTR is not set
# CONFIG_SCSI_NCR53C406A is not set
# CONFIG_SCSI_STEX is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_QLOGIC_FAS is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
# CONFIG_SCSI_QLA_ISCSI is not set
# CONFIG_SCSI_SIM710 is not set
CONFIG_SCSI_SYM53C416=y
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_AM53C974 is not set
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_WD719X is not set
CONFIG_SCSI_DEBUG=y
# CONFIG_SCSI_PMCRAID is not set
# CONFIG_SCSI_PM8001 is not set
CONFIG_SCSI_DH=y
CONFIG_SCSI_DH_RDAC=y
CONFIG_SCSI_DH_HP_SW=y
# CONFIG_SCSI_DH_EMC is not set
CONFIG_SCSI_DH_ALUA=y
CONFIG_SCSI_OSD_INITIATOR=y
# CONFIG_SCSI_OSD_ULD is not set
CONFIG_SCSI_OSD_DPRINT_SENSE=1
CONFIG_SCSI_OSD_DEBUG=y
# CONFIG_ATA is not set
CONFIG_MD=y
# CONFIG_BLK_DEV_MD is not set
CONFIG_BCACHE=y
CONFIG_BCACHE_DEBUG=y
CONFIG_BCACHE_CLOSURES_DEBUG=y
# CONFIG_BLK_DEV_DM is not set
CONFIG_TARGET_CORE=y
CONFIG_TCM_IBLOCK=y
CONFIG_TCM_FILEIO=y
CONFIG_TCM_PSCSI=y
# CONFIG_TCM_USER2 is not set
# CONFIG_LOOPBACK_TARGET is not set
# CONFIG_ISCSI_TARGET is not set
CONFIG_SBP_TARGET=y
# CONFIG_FUSION is not set

#
# IEEE 1394 (FireWire) support
#
CONFIG_FIREWIRE=y
# CONFIG_FIREWIRE_OHCI is not set
CONFIG_FIREWIRE_SBP2=y
# CONFIG_FIREWIRE_NOSY is not set
CONFIG_MACINTOSH_DRIVERS=y
# CONFIG_MAC_EMUMOUSEBTN is not set
# CONFIG_NETDEVICES is not set
CONFIG_NVM=y
# CONFIG_NVM_DEBUG is not set
# CONFIG_NVM_RRPC is not set

#
# Input device support
#
CONFIG_INPUT=y
CONFIG_INPUT_LEDS=y
CONFIG_INPUT_FF_MEMLESS=y
CONFIG_INPUT_POLLDEV=y
CONFIG_INPUT_SPARSEKMAP=y
CONFIG_INPUT_MATRIXKMAP=y

#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
CONFIG_INPUT_EVDEV=y
# CONFIG_INPUT_EVBUG is not set

#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
# CONFIG_KEYBOARD_ADC is not set
# CONFIG_KEYBOARD_ADP5588 is not set
# CONFIG_KEYBOARD_ADP5589 is not set
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_QT1070 is not set
# CONFIG_KEYBOARD_QT2160 is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_GPIO is not set
# CONFIG_KEYBOARD_GPIO_POLLED is not set
# CONFIG_KEYBOARD_TCA6416 is not set
# CONFIG_KEYBOARD_TCA8418 is not set
# CONFIG_KEYBOARD_MATRIX is not set
# CONFIG_KEYBOARD_LM8323 is not set
# CONFIG_KEYBOARD_LM8333 is not set
# CONFIG_KEYBOARD_MAX7359 is not set
# CONFIG_KEYBOARD_MCS is not set
# CONFIG_KEYBOARD_MPR121 is not set
# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_KEYBOARD_OPENCORES is not set
# CONFIG_KEYBOARD_SAMSUNG is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_OMAP4 is not set
# CONFIG_KEYBOARD_TC3589X is not set
# CONFIG_KEYBOARD_TM2_TOUCHKEY is not set
# CONFIG_KEYBOARD_TWL4030 is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_CAP11XX is not set
# CONFIG_KEYBOARD_BCM is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
CONFIG_MOUSE_PS2_ALPS=y
# CONFIG_MOUSE_PS2_BYD is not set
# CONFIG_MOUSE_PS2_LOGIPS2PP is not set
CONFIG_MOUSE_PS2_SYNAPTICS=y
CONFIG_MOUSE_PS2_CYPRESS=y
CONFIG_MOUSE_PS2_LIFEBOOK=y
CONFIG_MOUSE_PS2_TRACKPOINT=y
# CONFIG_MOUSE_PS2_ELANTECH is not set
# CONFIG_MOUSE_PS2_SENTELIC is not set
# CONFIG_MOUSE_PS2_TOUCHKIT is not set
# CONFIG_MOUSE_PS2_OLPC is not set
CONFIG_MOUSE_PS2_FOCALTECH=y
# CONFIG_MOUSE_PS2_VMMOUSE is not set
# CONFIG_MOUSE_SERIAL is not set
CONFIG_MOUSE_APPLETOUCH=y
# CONFIG_MOUSE_BCM5974 is not set
CONFIG_MOUSE_CYAPA=y
# CONFIG_MOUSE_ELAN_I2C is not set
CONFIG_MOUSE_INPORT=y
# CONFIG_MOUSE_ATIXL is not set
# CONFIG_MOUSE_LOGIBM is not set
CONFIG_MOUSE_PC110PAD=y
CONFIG_MOUSE_VSXXXAA=y
# CONFIG_MOUSE_GPIO is not set
CONFIG_MOUSE_SYNAPTICS_I2C=y
# CONFIG_MOUSE_SYNAPTICS_USB is not set
# CONFIG_INPUT_JOYSTICK is not set
CONFIG_INPUT_TABLET=y
CONFIG_TABLET_USB_ACECAD=y
CONFIG_TABLET_USB_AIPTEK=y
CONFIG_TABLET_USB_GTCO=y
CONFIG_TABLET_USB_HANWANG=y
# CONFIG_TABLET_USB_KBTAB is not set
# CONFIG_TABLET_USB_PEGASUS is not set
CONFIG_TABLET_SERIAL_WACOM4=y
CONFIG_INPUT_TOUCHSCREEN=y
CONFIG_TOUCHSCREEN_PROPERTIES=y
CONFIG_TOUCHSCREEN_AD7879=y
CONFIG_TOUCHSCREEN_AD7879_I2C=y
CONFIG_TOUCHSCREEN_AR1021_I2C=y
# CONFIG_TOUCHSCREEN_ATMEL_MXT is not set
CONFIG_TOUCHSCREEN_AUO_PIXCIR=y
# CONFIG_TOUCHSCREEN_BU21013 is not set
CONFIG_TOUCHSCREEN_CHIPONE_ICN8318=y
# CONFIG_TOUCHSCREEN_CY8CTMG110 is not set
# CONFIG_TOUCHSCREEN_CYTTSP_CORE is not set
# CONFIG_TOUCHSCREEN_CYTTSP4_CORE is not set
CONFIG_TOUCHSCREEN_DA9052=y
CONFIG_TOUCHSCREEN_DYNAPRO=y
CONFIG_TOUCHSCREEN_HAMPSHIRE=y
CONFIG_TOUCHSCREEN_EETI=y
# CONFIG_TOUCHSCREEN_EGALAX is not set
CONFIG_TOUCHSCREEN_EGALAX_SERIAL=y
CONFIG_TOUCHSCREEN_FUJITSU=y
# CONFIG_TOUCHSCREEN_GOODIX is not set
CONFIG_TOUCHSCREEN_ILI210X=y
CONFIG_TOUCHSCREEN_GUNZE=y
# CONFIG_TOUCHSCREEN_EKTF2127 is not set
# CONFIG_TOUCHSCREEN_ELAN is not set
CONFIG_TOUCHSCREEN_ELO=y
CONFIG_TOUCHSCREEN_WACOM_W8001=y
# CONFIG_TOUCHSCREEN_WACOM_I2C is not set
CONFIG_TOUCHSCREEN_MAX11801=y
CONFIG_TOUCHSCREEN_MCS5000=y
CONFIG_TOUCHSCREEN_MMS114=y
CONFIG_TOUCHSCREEN_MELFAS_MIP4=y
CONFIG_TOUCHSCREEN_MTOUCH=y
CONFIG_TOUCHSCREEN_IMX6UL_TSC=y
# CONFIG_TOUCHSCREEN_INEXIO is not set
CONFIG_TOUCHSCREEN_MK712=y
CONFIG_TOUCHSCREEN_HTCPEN=y
# CONFIG_TOUCHSCREEN_PENMOUNT is not set
# CONFIG_TOUCHSCREEN_EDT_FT5X06 is not set
CONFIG_TOUCHSCREEN_TOUCHRIGHT=y
# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
CONFIG_TOUCHSCREEN_PIXCIR=y
CONFIG_TOUCHSCREEN_WDT87XX_I2C=y
CONFIG_TOUCHSCREEN_WM831X=y
CONFIG_TOUCHSCREEN_USB_COMPOSITE=y
CONFIG_TOUCHSCREEN_MC13783=y
CONFIG_TOUCHSCREEN_USB_EGALAX=y
# CONFIG_TOUCHSCREEN_USB_PANJIT is not set
# CONFIG_TOUCHSCREEN_USB_3M is not set
CONFIG_TOUCHSCREEN_USB_ITM=y
# CONFIG_TOUCHSCREEN_USB_ETURBO is not set
CONFIG_TOUCHSCREEN_USB_GUNZE=y
# CONFIG_TOUCHSCREEN_USB_DMC_TSC10 is not set
# CONFIG_TOUCHSCREEN_USB_IRTOUCH is not set
# CONFIG_TOUCHSCREEN_USB_IDEALTEK is not set
CONFIG_TOUCHSCREEN_USB_GENERAL_TOUCH=y
# CONFIG_TOUCHSCREEN_USB_GOTOP is not set
# CONFIG_TOUCHSCREEN_USB_JASTEC is not set
# CONFIG_TOUCHSCREEN_USB_ELO is not set
CONFIG_TOUCHSCREEN_USB_E2I=y
CONFIG_TOUCHSCREEN_USB_ZYTRONIC=y
CONFIG_TOUCHSCREEN_USB_ETT_TC45USB=y
# CONFIG_TOUCHSCREEN_USB_NEXIO is not set
CONFIG_TOUCHSCREEN_USB_EASYTOUCH=y
# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
# CONFIG_TOUCHSCREEN_TSC_SERIO is not set
# CONFIG_TOUCHSCREEN_TSC2004 is not set
CONFIG_TOUCHSCREEN_TSC2007=y
# CONFIG_TOUCHSCREEN_RM_TS is not set
CONFIG_TOUCHSCREEN_SILEAD=y
# CONFIG_TOUCHSCREEN_SIS_I2C is not set
# CONFIG_TOUCHSCREEN_ST1232 is not set
CONFIG_TOUCHSCREEN_SX8654=y
# CONFIG_TOUCHSCREEN_TPS6507X is not set
# CONFIG_TOUCHSCREEN_ZET6223 is not set
# CONFIG_TOUCHSCREEN_ZFORCE is not set
CONFIG_TOUCHSCREEN_COLIBRI_VF50=y
CONFIG_TOUCHSCREEN_ROHM_BU21023=y
CONFIG_INPUT_MISC=y
CONFIG_INPUT_88PM80X_ONKEY=y
CONFIG_INPUT_AD714X=y
CONFIG_INPUT_AD714X_I2C=y
CONFIG_INPUT_ATMEL_CAPTOUCH=y
# CONFIG_INPUT_BMA150 is not set
# CONFIG_INPUT_E3X0_BUTTON is not set
CONFIG_INPUT_PCSPKR=y
# CONFIG_INPUT_MAX77693_HAPTIC is not set
CONFIG_INPUT_MAX8925_ONKEY=y
# CONFIG_INPUT_MAX8997_HAPTIC is not set
CONFIG_INPUT_MC13783_PWRBUTTON=y
CONFIG_INPUT_MMA8450=y
# CONFIG_INPUT_APANEL is not set
CONFIG_INPUT_GP2A=y
CONFIG_INPUT_GPIO_BEEPER=y
CONFIG_INPUT_GPIO_TILT_POLLED=y
# CONFIG_INPUT_GPIO_DECODER is not set
CONFIG_INPUT_WISTRON_BTNS=y
# CONFIG_INPUT_ATLAS_BTNS is not set
# CONFIG_INPUT_ATI_REMOTE2 is not set
CONFIG_INPUT_KEYSPAN_REMOTE=y
# CONFIG_INPUT_KXTJ9 is not set
CONFIG_INPUT_POWERMATE=y
CONFIG_INPUT_YEALINK=y
CONFIG_INPUT_CM109=y
CONFIG_INPUT_REGULATOR_HAPTIC=y
CONFIG_INPUT_RETU_PWRBUTTON=y
CONFIG_INPUT_TPS65218_PWRBUTTON=y
CONFIG_INPUT_AXP20X_PEK=y
# CONFIG_INPUT_TWL4030_PWRBUTTON is not set
CONFIG_INPUT_TWL4030_VIBRA=y
CONFIG_INPUT_TWL6040_VIBRA=y
# CONFIG_INPUT_UINPUT is not set
CONFIG_INPUT_PALMAS_PWRBUTTON=y
CONFIG_INPUT_PCF50633_PMU=y
CONFIG_INPUT_PCF8574=y
CONFIG_INPUT_PWM_BEEPER=y
# CONFIG_INPUT_GPIO_ROTARY_ENCODER is not set
# CONFIG_INPUT_DA9052_ONKEY is not set
# CONFIG_INPUT_DA9055_ONKEY is not set
# CONFIG_INPUT_DA9063_ONKEY is not set
# CONFIG_INPUT_WM831X_ON is not set
CONFIG_INPUT_ADXL34X=y
CONFIG_INPUT_ADXL34X_I2C=y
CONFIG_INPUT_IMS_PCU=y
CONFIG_INPUT_CMA3000=y
CONFIG_INPUT_CMA3000_I2C=y
# CONFIG_INPUT_IDEAPAD_SLIDEBAR is not set
CONFIG_INPUT_DRV260X_HAPTICS=y
CONFIG_INPUT_DRV2665_HAPTICS=y
CONFIG_INPUT_DRV2667_HAPTICS=y
CONFIG_RMI4_CORE=y
CONFIG_RMI4_I2C=y
# CONFIG_RMI4_SMB is not set
CONFIG_RMI4_F03=y
CONFIG_RMI4_F03_SERIO=y
# CONFIG_RMI4_F11 is not set
# CONFIG_RMI4_F12 is not set
CONFIG_RMI4_F30=y
CONFIG_RMI4_F34=y
# CONFIG_RMI4_F55 is not set

#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_ARCH_MIGHT_HAVE_PC_SERIO=y
CONFIG_SERIO_I8042=y
CONFIG_SERIO_SERPORT=y
CONFIG_SERIO_CT82C710=y
CONFIG_SERIO_PARKBD=y
# CONFIG_SERIO_PCIPS2 is not set
CONFIG_SERIO_LIBPS2=y
CONFIG_SERIO_RAW=y
CONFIG_SERIO_ALTERA_PS2=y
CONFIG_SERIO_PS2MULT=y
CONFIG_SERIO_ARC_PS2=y
CONFIG_SERIO_APBPS2=y
CONFIG_SERIO_OLPC_APSP=y
CONFIG_USERIO=y
CONFIG_GAMEPORT=y
CONFIG_GAMEPORT_NS558=y
CONFIG_GAMEPORT_L4=y
# CONFIG_GAMEPORT_EMU10K1 is not set
# CONFIG_GAMEPORT_FM801 is not set

#
# Character devices
#
CONFIG_TTY=y
# CONFIG_VT is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_LEGACY_PTYS is not set
# CONFIG_SERIAL_NONSTANDARD is not set
# CONFIG_NOZOMI is not set
# CONFIG_N_GSM is not set
CONFIG_TRACE_ROUTER=y
CONFIG_TRACE_SINK=y
# CONFIG_DEVMEM is not set
CONFIG_DEVKMEM=y

#
# Serial drivers
#
CONFIG_SERIAL_EARLYCON=y
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_DEPRECATED_OPTIONS=y
CONFIG_SERIAL_8250_PNP=y
CONFIG_SERIAL_8250_FINTEK=y
CONFIG_SERIAL_8250_CONSOLE=y
# CONFIG_SERIAL_8250_DMA is not set
CONFIG_SERIAL_8250_PCI=y
CONFIG_SERIAL_8250_EXAR=y
CONFIG_SERIAL_8250_NR_UARTS=4
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_MANY_PORTS=y
CONFIG_SERIAL_8250_FOURPORT=y
CONFIG_SERIAL_8250_ACCENT=y
CONFIG_SERIAL_8250_BOCA=y
CONFIG_SERIAL_8250_EXAR_ST16C554=y
# CONFIG_SERIAL_8250_HUB6 is not set
# CONFIG_SERIAL_8250_SHARE_IRQ is not set
CONFIG_SERIAL_8250_DETECT_IRQ=y
# CONFIG_SERIAL_8250_RSA is not set
# CONFIG_SERIAL_8250_FSL is not set
# CONFIG_SERIAL_8250_DW is not set
CONFIG_SERIAL_8250_RT288X=y
CONFIG_SERIAL_8250_LPSS=y
CONFIG_SERIAL_8250_MID=y
# CONFIG_SERIAL_8250_MOXA is not set
CONFIG_SERIAL_OF_PLATFORM=y

#
# Non-8250 serial port support
#
CONFIG_SERIAL_UARTLITE=y
CONFIG_SERIAL_UARTLITE_CONSOLE=y
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
CONFIG_SERIAL_SCCNXP=y
CONFIG_SERIAL_SCCNXP_CONSOLE=y
CONFIG_SERIAL_SC16IS7XX=y
# CONFIG_SERIAL_SC16IS7XX_I2C is not set
CONFIG_SERIAL_TIMBERDALE=y
CONFIG_SERIAL_ALTERA_JTAGUART=y
CONFIG_SERIAL_ALTERA_JTAGUART_CONSOLE=y
CONFIG_SERIAL_ALTERA_JTAGUART_CONSOLE_BYPASS=y
CONFIG_SERIAL_ALTERA_UART=y
CONFIG_SERIAL_ALTERA_UART_MAXPORTS=4
CONFIG_SERIAL_ALTERA_UART_BAUDRATE=115200
# CONFIG_SERIAL_ALTERA_UART_CONSOLE is not set
# CONFIG_SERIAL_PCH_UART is not set
CONFIG_SERIAL_XILINX_PS_UART=y
# CONFIG_SERIAL_XILINX_PS_UART_CONSOLE is not set
CONFIG_SERIAL_ARC=y
# CONFIG_SERIAL_ARC_CONSOLE is not set
CONFIG_SERIAL_ARC_NR_PORTS=1
# CONFIG_SERIAL_RP2 is not set
# CONFIG_SERIAL_FSL_LPUART is not set
# CONFIG_SERIAL_CONEXANT_DIGICOLOR is not set
CONFIG_SERIAL_MEN_Z135=y
CONFIG_SERIAL_DEV_BUS=y
# CONFIG_SERIAL_DEV_CTRL_TTYPORT is not set
CONFIG_TTY_PRINTK=y
# CONFIG_PRINTER is not set
CONFIG_PPDEV=y
# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=y
CONFIG_HW_RANDOM_TIMERIOMEM=y
CONFIG_HW_RANDOM_INTEL=y
CONFIG_HW_RANDOM_AMD=y
CONFIG_HW_RANDOM_GEODE=y
CONFIG_HW_RANDOM_VIA=y
CONFIG_NVRAM=y
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_SONYPI is not set
CONFIG_MWAVE=y
CONFIG_SCx200_GPIO=y
# CONFIG_PC8736x_GPIO is not set
CONFIG_NSC_GPIO=y
CONFIG_RAW_DRIVER=y
CONFIG_MAX_RAW_DEVS=256
# CONFIG_HPET is not set
# CONFIG_HANGCHECK_TIMER is not set
# CONFIG_TCG_TPM is not set
CONFIG_TELCLOCK=y
CONFIG_DEVPORT=y
CONFIG_XILLYBUS=y
CONFIG_XILLYBUS_OF=y

#
# I2C support
#
CONFIG_I2C=y
CONFIG_ACPI_I2C_OPREGION=y
CONFIG_I2C_BOARDINFO=y
# CONFIG_I2C_COMPAT is not set
CONFIG_I2C_CHARDEV=y
CONFIG_I2C_MUX=y

#
# Multiplexer I2C Chip support
#
CONFIG_I2C_ARB_GPIO_CHALLENGE=y
CONFIG_I2C_MUX_GPIO=y
CONFIG_I2C_MUX_PCA9541=y
# CONFIG_I2C_MUX_PCA954x is not set
# CONFIG_I2C_MUX_REG is not set
CONFIG_I2C_MUX_MLXCPLD=y
CONFIG_I2C_HELPER_AUTO=y
CONFIG_I2C_SMBUS=y
CONFIG_I2C_ALGOBIT=y

#
# I2C Hardware Bus support
#

#
# PC SMBus host controller drivers
#
# CONFIG_I2C_ALI1535 is not set
# CONFIG_I2C_ALI1563 is not set
# CONFIG_I2C_ALI15X3 is not set
# CONFIG_I2C_AMD756 is not set
# CONFIG_I2C_AMD8111 is not set
# CONFIG_I2C_I801 is not set
# CONFIG_I2C_ISCH is not set
# CONFIG_I2C_ISMT is not set
# CONFIG_I2C_PIIX4 is not set
# CONFIG_I2C_NFORCE2 is not set
# CONFIG_I2C_SIS5595 is not set
# CONFIG_I2C_SIS630 is not set
# CONFIG_I2C_SIS96X is not set
# CONFIG_I2C_VIA is not set
# CONFIG_I2C_VIAPRO is not set

#
# ACPI drivers
#
# CONFIG_I2C_SCMI is not set

#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
# CONFIG_I2C_CBUS_GPIO is not set
CONFIG_I2C_DESIGNWARE_CORE=y
CONFIG_I2C_DESIGNWARE_PLATFORM=y
# CONFIG_I2C_DESIGNWARE_PCI is not set
# CONFIG_I2C_DESIGNWARE_BAYTRAIL is not set
# CONFIG_I2C_EG20T is not set
# CONFIG_I2C_EMEV2 is not set
CONFIG_I2C_GPIO=y
CONFIG_I2C_KEMPLD=y
CONFIG_I2C_OCORES=y
# CONFIG_I2C_PCA_PLATFORM is not set
# CONFIG_I2C_PXA is not set
# CONFIG_I2C_PXA_PCI is not set
# CONFIG_I2C_RK3X is not set
CONFIG_I2C_SIMTEC=y
CONFIG_I2C_XILINX=y

#
# External I2C/SMBus adapter drivers
#
CONFIG_I2C_DIOLAN_U2C=y
CONFIG_I2C_DLN2=y
CONFIG_I2C_PARPORT=y
CONFIG_I2C_PARPORT_LIGHT=y
CONFIG_I2C_ROBOTFUZZ_OSIF=y
CONFIG_I2C_TAOS_EVM=y
# CONFIG_I2C_TINY_USB is not set

#
# Other I2C/SMBus bus drivers
#
# CONFIG_I2C_PCA_ISA is not set
# CONFIG_SCx200_ACB is not set
CONFIG_I2C_SLAVE=y
# CONFIG_I2C_SLAVE_EEPROM is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_SPI is not set
# CONFIG_SPMI is not set
CONFIG_HSI=y
CONFIG_HSI_BOARDINFO=y

#
# HSI controllers
#

#
# HSI clients
#
# CONFIG_HSI_CHAR is not set

#
# PPS support
#
CONFIG_PPS=y
# CONFIG_PPS_DEBUG is not set

#
# PPS clients support
#
CONFIG_PPS_CLIENT_KTIMER=y
CONFIG_PPS_CLIENT_LDISC=y
# CONFIG_PPS_CLIENT_PARPORT is not set
# CONFIG_PPS_CLIENT_GPIO is not set

#
# PPS generators support
#

#
# PTP clock support
#
# CONFIG_PTP_1588_CLOCK is not set

#
# Enable PHYLIB and NETWORK_PHY_TIMESTAMPING to see the additional clocks.
#
# CONFIG_PTP_1588_CLOCK_PCH is not set
CONFIG_GPIOLIB=y
CONFIG_OF_GPIO=y
CONFIG_GPIO_ACPI=y
CONFIG_GPIOLIB_IRQCHIP=y
CONFIG_DEBUG_GPIO=y
CONFIG_GPIO_SYSFS=y
CONFIG_GPIO_GENERIC=y
CONFIG_GPIO_MAX730X=y

#
# Memory mapped GPIO drivers
#
CONFIG_GPIO_74XX_MMIO=y
# CONFIG_GPIO_ALTERA is not set
# CONFIG_GPIO_AMDPT is not set
CONFIG_GPIO_AXP209=y
CONFIG_GPIO_DWAPB=y
# CONFIG_GPIO_EXAR is not set
CONFIG_GPIO_GENERIC_PLATFORM=y
CONFIG_GPIO_GRGPIO=y
# CONFIG_GPIO_ICH is not set
# CONFIG_GPIO_LYNXPOINT is not set
CONFIG_GPIO_MENZ127=y
CONFIG_GPIO_MOCKUP=y
CONFIG_GPIO_SYSCON=y
# CONFIG_GPIO_VX855 is not set
CONFIG_GPIO_XILINX=y

#
# Port-mapped I/O GPIO drivers
#
CONFIG_GPIO_104_DIO_48E=y
CONFIG_GPIO_104_IDIO_16=y
CONFIG_GPIO_104_IDI_48=y
CONFIG_GPIO_F7188X=y
CONFIG_GPIO_GPIO_MM=y
CONFIG_GPIO_IT87=y
# CONFIG_GPIO_SCH is not set
# CONFIG_GPIO_SCH311X is not set
# CONFIG_GPIO_WS16C48 is not set

#
# I2C GPIO expanders
#
CONFIG_GPIO_ADP5588=y
# CONFIG_GPIO_ADP5588_IRQ is not set
CONFIG_GPIO_ADNP=y
CONFIG_GPIO_MAX7300=y
CONFIG_GPIO_MAX732X=y
CONFIG_GPIO_MAX732X_IRQ=y
# CONFIG_GPIO_PCA953X is not set
CONFIG_GPIO_PCF857X=y
CONFIG_GPIO_TPIC2810=y

#
# MFD GPIO expanders
#
# CONFIG_GPIO_ARIZONA is not set
# CONFIG_GPIO_CRYSTAL_COVE is not set
CONFIG_GPIO_DA9052=y
CONFIG_GPIO_DA9055=y
CONFIG_GPIO_DLN2=y
CONFIG_GPIO_KEMPLD=y
# CONFIG_GPIO_LP3943 is not set
# CONFIG_GPIO_PALMAS is not set
CONFIG_GPIO_RC5T583=y
CONFIG_GPIO_TC3589X=y
CONFIG_GPIO_TPS65086=y
# CONFIG_GPIO_TPS65218 is not set
CONFIG_GPIO_TPS6586X=y
CONFIG_GPIO_TPS65912=y
CONFIG_GPIO_TWL4030=y
CONFIG_GPIO_TWL6040=y
CONFIG_GPIO_WHISKEY_COVE=y
CONFIG_GPIO_WM831X=y
CONFIG_GPIO_WM8350=y
# CONFIG_GPIO_WM8994 is not set

#
# PCI GPIO expanders
#
# CONFIG_GPIO_AMD8111 is not set
# CONFIG_GPIO_BT8XX is not set
# CONFIG_GPIO_ML_IOH is not set
# CONFIG_GPIO_PCH is not set
# CONFIG_GPIO_PCI_IDIO_16 is not set
# CONFIG_GPIO_RDC321X is not set
# CONFIG_GPIO_SODAVILLE is not set

#
# SPI or I2C GPIO expanders
#
CONFIG_GPIO_MCP23S08=y

#
# USB GPIO expanders
#
CONFIG_W1=y

#
# 1-wire Bus Masters
#
# CONFIG_W1_MASTER_MATROX is not set
CONFIG_W1_MASTER_DS2490=y
CONFIG_W1_MASTER_DS2482=y
CONFIG_W1_MASTER_DS1WM=y
# CONFIG_W1_MASTER_GPIO is not set

#
# 1-wire Slaves
#
# CONFIG_W1_SLAVE_THERM is not set
CONFIG_W1_SLAVE_SMEM=y
CONFIG_W1_SLAVE_DS2405=y
CONFIG_W1_SLAVE_DS2408=y
CONFIG_W1_SLAVE_DS2408_READBACK=y
# CONFIG_W1_SLAVE_DS2413 is not set
CONFIG_W1_SLAVE_DS2406=y
CONFIG_W1_SLAVE_DS2423=y
CONFIG_W1_SLAVE_DS2431=y
CONFIG_W1_SLAVE_DS2433=y
# CONFIG_W1_SLAVE_DS2433_CRC is not set
CONFIG_W1_SLAVE_DS2760=y
CONFIG_W1_SLAVE_DS2780=y
# CONFIG_W1_SLAVE_DS2781 is not set
CONFIG_W1_SLAVE_DS28E04=y
# CONFIG_W1_SLAVE_BQ27000 is not set
CONFIG_POWER_AVS=y
CONFIG_POWER_RESET=y
CONFIG_POWER_RESET_AS3722=y
# CONFIG_POWER_RESET_GPIO is not set
# CONFIG_POWER_RESET_GPIO_RESTART is not set
# CONFIG_POWER_RESET_LTC2952 is not set
# CONFIG_POWER_RESET_RESTART is not set
CONFIG_POWER_RESET_SYSCON=y
# CONFIG_POWER_RESET_SYSCON_POWEROFF is not set
# CONFIG_SYSCON_REBOOT_MODE is not set
CONFIG_POWER_SUPPLY=y
# CONFIG_POWER_SUPPLY_DEBUG is not set
CONFIG_PDA_POWER=y
CONFIG_GENERIC_ADC_BATTERY=y
# CONFIG_MAX8925_POWER is not set
# CONFIG_WM831X_BACKUP is not set
# CONFIG_WM831X_POWER is not set
CONFIG_WM8350_POWER=y
CONFIG_TEST_POWER=y
CONFIG_BATTERY_ACT8945A=y
CONFIG_BATTERY_DS2760=y
CONFIG_BATTERY_DS2780=y
# CONFIG_BATTERY_DS2781 is not set
CONFIG_BATTERY_DS2782=y
CONFIG_BATTERY_OLPC=y
# CONFIG_BATTERY_SBS is not set
CONFIG_CHARGER_SBS=y
# CONFIG_BATTERY_BQ27XXX is not set
# CONFIG_BATTERY_DA9052 is not set
CONFIG_CHARGER_DA9150=y
CONFIG_BATTERY_DA9150=y
# CONFIG_AXP288_CHARGER is not set
# CONFIG_AXP288_FUEL_GAUGE is not set
CONFIG_BATTERY_MAX17040=y
CONFIG_BATTERY_MAX17042=y
CONFIG_BATTERY_TWL4030_MADC=y
# CONFIG_CHARGER_PCF50633 is not set
CONFIG_BATTERY_RX51=y
# CONFIG_CHARGER_ISP1704 is not set
CONFIG_CHARGER_MAX8903=y
CONFIG_CHARGER_TWL4030=y
CONFIG_CHARGER_LP8727=y
CONFIG_CHARGER_LP8788=y
CONFIG_CHARGER_GPIO=y
CONFIG_CHARGER_MANAGER=y
# CONFIG_CHARGER_DETECTOR_MAX14656 is not set
# CONFIG_CHARGER_MAX77693 is not set
CONFIG_CHARGER_MAX8998=y
# CONFIG_CHARGER_BQ2415X is not set
CONFIG_CHARGER_BQ24190=y
# CONFIG_CHARGER_BQ24257 is not set
CONFIG_CHARGER_BQ24735=y
# CONFIG_CHARGER_BQ25890 is not set
CONFIG_CHARGER_SMB347=y
# CONFIG_CHARGER_TPS65090 is not set
# CONFIG_BATTERY_GAUGE_LTC2941 is not set
CONFIG_BATTERY_RT5033=y
CONFIG_CHARGER_RT9455=y
# CONFIG_AXP20X_POWER is not set
CONFIG_HWMON=y
CONFIG_HWMON_VID=y
CONFIG_HWMON_DEBUG_CHIP=y

#
# Native drivers
#
CONFIG_SENSORS_ABITUGURU=y
CONFIG_SENSORS_ABITUGURU3=y
CONFIG_SENSORS_AD7414=y
CONFIG_SENSORS_AD7418=y
CONFIG_SENSORS_ADM1021=y
CONFIG_SENSORS_ADM1025=y
CONFIG_SENSORS_ADM1026=y
# CONFIG_SENSORS_ADM1029 is not set
CONFIG_SENSORS_ADM1031=y
# CONFIG_SENSORS_ADM9240 is not set
# CONFIG_SENSORS_ADT7410 is not set
CONFIG_SENSORS_ADT7411=y
# CONFIG_SENSORS_ADT7462 is not set
CONFIG_SENSORS_ADT7470=y
CONFIG_SENSORS_ADT7475=y
CONFIG_SENSORS_ASC7621=y
# CONFIG_SENSORS_K8TEMP is not set
# CONFIG_SENSORS_K10TEMP is not set
# CONFIG_SENSORS_APPLESMC is not set
# CONFIG_SENSORS_ASB100 is not set
CONFIG_SENSORS_ATXP1=y
CONFIG_SENSORS_DS620=y
# CONFIG_SENSORS_DS1621 is not set
CONFIG_SENSORS_DELL_SMM=y
# CONFIG_SENSORS_DA9052_ADC is not set
CONFIG_SENSORS_DA9055=y
# CONFIG_SENSORS_I5K_AMB is not set
CONFIG_SENSORS_F71805F=y
# CONFIG_SENSORS_F71882FG is not set
CONFIG_SENSORS_F75375S=y
CONFIG_SENSORS_MC13783_ADC=y
CONFIG_SENSORS_FSCHMD=y
CONFIG_SENSORS_FTSTEUTATES=y
# CONFIG_SENSORS_GL518SM is not set
CONFIG_SENSORS_GL520SM=y
CONFIG_SENSORS_G760A=y
# CONFIG_SENSORS_G762 is not set
# CONFIG_SENSORS_GPIO_FAN is not set
CONFIG_SENSORS_HIH6130=y
CONFIG_SENSORS_IIO_HWMON=y
# CONFIG_SENSORS_I5500 is not set
# CONFIG_SENSORS_CORETEMP is not set
CONFIG_SENSORS_IT87=y
# CONFIG_SENSORS_JC42 is not set
# CONFIG_SENSORS_POWR1220 is not set
CONFIG_SENSORS_LINEAGE=y
CONFIG_SENSORS_LTC2945=y
# CONFIG_SENSORS_LTC2990 is not set
CONFIG_SENSORS_LTC4151=y
CONFIG_SENSORS_LTC4215=y
CONFIG_SENSORS_LTC4222=y
# CONFIG_SENSORS_LTC4245 is not set
# CONFIG_SENSORS_LTC4260 is not set
# CONFIG_SENSORS_LTC4261 is not set
CONFIG_SENSORS_MAX16065=y
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_MAX1668 is not set
# CONFIG_SENSORS_MAX197 is not set
CONFIG_SENSORS_MAX6639=y
CONFIG_SENSORS_MAX6642=y
# CONFIG_SENSORS_MAX6650 is not set
# CONFIG_SENSORS_MAX6697 is not set
# CONFIG_SENSORS_MAX31790 is not set
# CONFIG_SENSORS_MCP3021 is not set
# CONFIG_SENSORS_TC654 is not set
# CONFIG_SENSORS_MENF21BMC_HWMON is not set
CONFIG_SENSORS_LM63=y
CONFIG_SENSORS_LM73=y
CONFIG_SENSORS_LM75=y
CONFIG_SENSORS_LM77=y
# CONFIG_SENSORS_LM78 is not set
CONFIG_SENSORS_LM80=y
# CONFIG_SENSORS_LM83 is not set
CONFIG_SENSORS_LM85=y
CONFIG_SENSORS_LM87=y
CONFIG_SENSORS_LM90=y
CONFIG_SENSORS_LM92=y
CONFIG_SENSORS_LM93=y
CONFIG_SENSORS_LM95234=y
CONFIG_SENSORS_LM95241=y
CONFIG_SENSORS_LM95245=y
CONFIG_SENSORS_PC87360=y
CONFIG_SENSORS_PC87427=y
CONFIG_SENSORS_NTC_THERMISTOR=y
CONFIG_SENSORS_NCT6683=y
CONFIG_SENSORS_NCT6775=y
CONFIG_SENSORS_NCT7802=y
CONFIG_SENSORS_NCT7904=y
# CONFIG_SENSORS_PCF8591 is not set
CONFIG_PMBUS=y
CONFIG_SENSORS_PMBUS=y
CONFIG_SENSORS_ADM1275=y
CONFIG_SENSORS_LM25066=y
CONFIG_SENSORS_LTC2978=y
CONFIG_SENSORS_LTC2978_REGULATOR=y
CONFIG_SENSORS_LTC3815=y
CONFIG_SENSORS_MAX16064=y
# CONFIG_SENSORS_MAX20751 is not set
# CONFIG_SENSORS_MAX34440 is not set
CONFIG_SENSORS_MAX8688=y
# CONFIG_SENSORS_TPS40422 is not set
CONFIG_SENSORS_UCD9000=y
CONFIG_SENSORS_UCD9200=y
CONFIG_SENSORS_ZL6100=y
# CONFIG_SENSORS_PWM_FAN is not set
CONFIG_SENSORS_SHT15=y
CONFIG_SENSORS_SHT21=y
# CONFIG_SENSORS_SHT3x is not set
# CONFIG_SENSORS_SHTC1 is not set
# CONFIG_SENSORS_SIS5595 is not set
CONFIG_SENSORS_DME1737=y
CONFIG_SENSORS_EMC1403=y
CONFIG_SENSORS_EMC2103=y
# CONFIG_SENSORS_EMC6W201 is not set
CONFIG_SENSORS_SMSC47M1=y
CONFIG_SENSORS_SMSC47M192=y
CONFIG_SENSORS_SMSC47B397=y
CONFIG_SENSORS_SCH56XX_COMMON=y
CONFIG_SENSORS_SCH5627=y
# CONFIG_SENSORS_SCH5636 is not set
# CONFIG_SENSORS_STTS751 is not set
CONFIG_SENSORS_SMM665=y
# CONFIG_SENSORS_ADC128D818 is not set
# CONFIG_SENSORS_ADS1015 is not set
CONFIG_SENSORS_ADS7828=y
# CONFIG_SENSORS_AMC6821 is not set
CONFIG_SENSORS_INA209=y
# CONFIG_SENSORS_INA2XX is not set
CONFIG_SENSORS_INA3221=y
CONFIG_SENSORS_TC74=y
CONFIG_SENSORS_THMC50=y
# CONFIG_SENSORS_TMP102 is not set
CONFIG_SENSORS_TMP103=y
# CONFIG_SENSORS_TMP108 is not set
CONFIG_SENSORS_TMP401=y
CONFIG_SENSORS_TMP421=y
CONFIG_SENSORS_TWL4030_MADC=y
CONFIG_SENSORS_VIA_CPUTEMP=y
# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_VT1211 is not set
# CONFIG_SENSORS_VT8231 is not set
# CONFIG_SENSORS_W83781D is not set
CONFIG_SENSORS_W83791D=y
CONFIG_SENSORS_W83792D=y
# CONFIG_SENSORS_W83793 is not set
CONFIG_SENSORS_W83795=y
# CONFIG_SENSORS_W83795_FANCTRL is not set
CONFIG_SENSORS_W83L785TS=y
CONFIG_SENSORS_W83L786NG=y
CONFIG_SENSORS_W83627HF=y
CONFIG_SENSORS_W83627EHF=y
CONFIG_SENSORS_WM831X=y
CONFIG_SENSORS_WM8350=y

#
# ACPI drivers
#
# CONFIG_SENSORS_ACPI_POWER is not set
# CONFIG_SENSORS_ATK0110 is not set
CONFIG_THERMAL=y
CONFIG_THERMAL_HWMON=y
CONFIG_THERMAL_OF=y
# CONFIG_THERMAL_WRITABLE_TRIPS is not set
CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE=y
# CONFIG_THERMAL_DEFAULT_GOV_FAIR_SHARE is not set
# CONFIG_THERMAL_DEFAULT_GOV_USER_SPACE is not set
# CONFIG_THERMAL_DEFAULT_GOV_POWER_ALLOCATOR is not set
# CONFIG_THERMAL_GOV_FAIR_SHARE is not set
CONFIG_THERMAL_GOV_STEP_WISE=y
# CONFIG_THERMAL_GOV_BANG_BANG is not set
# CONFIG_THERMAL_GOV_USER_SPACE is not set
# CONFIG_THERMAL_GOV_POWER_ALLOCATOR is not set
# CONFIG_CPU_THERMAL is not set
# CONFIG_THERMAL_EMULATION is not set
# CONFIG_QORIQ_THERMAL is not set
# CONFIG_INTEL_POWERCLAMP is not set
# CONFIG_INTEL_SOC_DTS_THERMAL is not set

#
# ACPI INT340X thermal drivers
#
# CONFIG_INT340X_THERMAL is not set
# CONFIG_INTEL_BXT_PMIC_THERMAL is not set
# CONFIG_INTEL_PCH_THERMAL is not set
# CONFIG_GENERIC_ADC_THERMAL is not set
CONFIG_WATCHDOG=y
CONFIG_WATCHDOG_CORE=y
CONFIG_WATCHDOG_NOWAYOUT=y
# CONFIG_WATCHDOG_SYSFS is not set

#
# Watchdog Device Drivers
#
CONFIG_SOFT_WATCHDOG=y
CONFIG_DA9052_WATCHDOG=y
# CONFIG_DA9055_WATCHDOG is not set
# CONFIG_DA9062_WATCHDOG is not set
CONFIG_GPIO_WATCHDOG=y
CONFIG_GPIO_WATCHDOG_ARCH_INITCALL=y
# CONFIG_MENF21BMC_WATCHDOG is not set
# CONFIG_WDAT_WDT is not set
# CONFIG_WM831X_WATCHDOG is not set
# CONFIG_WM8350_WATCHDOG is not set
CONFIG_XILINX_WATCHDOG=y
CONFIG_ZIIRAVE_WATCHDOG=y
# CONFIG_CADENCE_WATCHDOG is not set
CONFIG_DW_WATCHDOG=y
# CONFIG_TWL4030_WATCHDOG is not set
# CONFIG_MAX63XX_WATCHDOG is not set
CONFIG_RETU_WATCHDOG=y
CONFIG_ACQUIRE_WDT=y
CONFIG_ADVANTECH_WDT=y
# CONFIG_ALIM1535_WDT is not set
# CONFIG_ALIM7101_WDT is not set
CONFIG_EBC_C384_WDT=y
# CONFIG_F71808E_WDT is not set
# CONFIG_SP5100_TCO is not set
CONFIG_SBC_FITPC2_WATCHDOG=y
# CONFIG_EUROTECH_WDT is not set
CONFIG_IB700_WDT=y
# CONFIG_IBMASR is not set
CONFIG_WAFER_WDT=y
# CONFIG_I6300ESB_WDT is not set
# CONFIG_IE6XX_WDT is not set
# CONFIG_ITCO_WDT is not set
# CONFIG_IT8712F_WDT is not set
CONFIG_IT87_WDT=y
# CONFIG_HP_WATCHDOG is not set
CONFIG_KEMPLD_WDT=y
CONFIG_SC1200_WDT=y
# CONFIG_SCx200_WDT is not set
# CONFIG_PC87413_WDT is not set
# CONFIG_NV_TCO is not set
# CONFIG_RDC321X_WDT is not set
# CONFIG_60XX_WDT is not set
# CONFIG_SBC8360_WDT is not set
# CONFIG_SBC7240_WDT is not set
CONFIG_CPU5_WDT=y
CONFIG_SMSC_SCH311X_WDT=y
CONFIG_SMSC37B787_WDT=y
# CONFIG_VIA_WDT is not set
CONFIG_W83627HF_WDT=y
CONFIG_W83877F_WDT=y
CONFIG_W83977F_WDT=y
CONFIG_MACHZ_WDT=y
CONFIG_SBC_EPX_C3_WATCHDOG=y
# CONFIG_NI903X_WDT is not set
# CONFIG_NIC7018_WDT is not set
CONFIG_MEN_A21_WDT=y

#
# ISA-based Watchdog Cards
#
# CONFIG_PCWATCHDOG is not set
CONFIG_MIXCOMWD=y
# CONFIG_WDT is not set

#
# PCI-based Watchdog Cards
#
# CONFIG_PCIPCWATCHDOG is not set
# CONFIG_WDTPCI is not set

#
# USB-based Watchdog Cards
#
CONFIG_USBPCWATCHDOG=y

#
# Watchdog Pretimeout Governors
#
# CONFIG_WATCHDOG_PRETIMEOUT_GOV is not set
CONFIG_SSB_POSSIBLE=y

#
# Sonics Silicon Backplane
#
CONFIG_SSB=y
CONFIG_SSB_SPROM=y
CONFIG_SSB_PCIHOST_POSSIBLE=y
CONFIG_SSB_PCIHOST=y
# CONFIG_SSB_B43_PCI_BRIDGE is not set
CONFIG_SSB_SILENT=y
CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y
# CONFIG_SSB_DRIVER_PCICORE is not set
CONFIG_SSB_DRIVER_GPIO=y
CONFIG_BCMA_POSSIBLE=y

#
# Broadcom specific AMBA
#
# CONFIG_BCMA is not set

#
# Multifunction device drivers
#
CONFIG_MFD_CORE=y
# CONFIG_MFD_CS5535 is not set
CONFIG_MFD_ACT8945A=y
CONFIG_MFD_AS3711=y
CONFIG_MFD_AS3722=y
# CONFIG_PMIC_ADP5520 is not set
# CONFIG_MFD_AAT2870_CORE is not set
# CONFIG_MFD_ATMEL_FLEXCOM is not set
CONFIG_MFD_ATMEL_HLCDC=y
# CONFIG_MFD_BCM590XX is not set
CONFIG_MFD_AXP20X=y
CONFIG_MFD_AXP20X_I2C=y
# CONFIG_MFD_CROS_EC is not set
# CONFIG_PMIC_DA903X is not set
CONFIG_PMIC_DA9052=y
CONFIG_MFD_DA9052_I2C=y
CONFIG_MFD_DA9055=y
CONFIG_MFD_DA9062=y
# CONFIG_MFD_DA9063 is not set
CONFIG_MFD_DA9150=y
CONFIG_MFD_DLN2=y
CONFIG_MFD_MC13XXX=y
CONFIG_MFD_MC13XXX_I2C=y
CONFIG_MFD_HI6421_PMIC=y
CONFIG_HTC_PASIC3=y
CONFIG_HTC_I2CPLD=y
# CONFIG_MFD_INTEL_QUARK_I2C_GPIO is not set
# CONFIG_LPC_ICH is not set
# CONFIG_LPC_SCH is not set
CONFIG_INTEL_SOC_PMIC=y
# CONFIG_MFD_INTEL_LPSS_ACPI is not set
# CONFIG_MFD_INTEL_LPSS_PCI is not set
# CONFIG_MFD_JANZ_CMODIO is not set
CONFIG_MFD_KEMPLD=y
CONFIG_MFD_88PM800=y
# CONFIG_MFD_88PM805 is not set
# CONFIG_MFD_88PM860X is not set
# CONFIG_MFD_MAX14577 is not set
# CONFIG_MFD_MAX77620 is not set
CONFIG_MFD_MAX77686=y
CONFIG_MFD_MAX77693=y
# CONFIG_MFD_MAX77843 is not set
CONFIG_MFD_MAX8907=y
CONFIG_MFD_MAX8925=y
CONFIG_MFD_MAX8997=y
CONFIG_MFD_MAX8998=y
CONFIG_MFD_MT6397=y
CONFIG_MFD_MENF21BMC=y
# CONFIG_MFD_VIPERBOARD is not set
CONFIG_MFD_RETU=y
CONFIG_MFD_PCF50633=y
# CONFIG_PCF50633_ADC is not set
CONFIG_PCF50633_GPIO=y
# CONFIG_MFD_RDC321X is not set
# CONFIG_MFD_RTSX_PCI is not set
CONFIG_MFD_RT5033=y
CONFIG_MFD_RTSX_USB=y
CONFIG_MFD_RC5T583=y
CONFIG_MFD_RK808=y
# CONFIG_MFD_RN5T618 is not set
# CONFIG_MFD_SEC_CORE is not set
# CONFIG_MFD_SI476X_CORE is not set
CONFIG_MFD_SM501=y
# CONFIG_MFD_SM501_GPIO is not set
# CONFIG_MFD_SKY81452 is not set
# CONFIG_MFD_SMSC is not set
# CONFIG_ABX500_CORE is not set
# CONFIG_MFD_STMPE is not set
CONFIG_MFD_SYSCON=y
# CONFIG_MFD_TI_AM335X_TSCADC is not set
CONFIG_MFD_LP3943=y
CONFIG_MFD_LP8788=y
CONFIG_MFD_PALMAS=y
CONFIG_TPS6105X=y
# CONFIG_TPS65010 is not set
CONFIG_TPS6507X=y
CONFIG_MFD_TPS65086=y
CONFIG_MFD_TPS65090=y
# CONFIG_MFD_TPS65217 is not set
# CONFIG_MFD_TI_LP873X is not set
CONFIG_MFD_TPS65218=y
CONFIG_MFD_TPS6586X=y
# CONFIG_MFD_TPS65910 is not set
CONFIG_MFD_TPS65912=y
CONFIG_MFD_TPS65912_I2C=y
# CONFIG_MFD_TPS80031 is not set
CONFIG_TWL4030_CORE=y
CONFIG_MFD_TWL4030_AUDIO=y
CONFIG_TWL6040_CORE=y
# CONFIG_MFD_WL1273_CORE is not set
CONFIG_MFD_LM3533=y
# CONFIG_MFD_TIMBERDALE is not set
CONFIG_MFD_TC3589X=y
# CONFIG_MFD_TMIO is not set
# CONFIG_MFD_VX855 is not set
CONFIG_MFD_ARIZONA=y
CONFIG_MFD_ARIZONA_I2C=y
CONFIG_MFD_CS47L24=y
CONFIG_MFD_WM5102=y
CONFIG_MFD_WM5110=y
CONFIG_MFD_WM8997=y
CONFIG_MFD_WM8998=y
# CONFIG_MFD_WM8400 is not set
CONFIG_MFD_WM831X=y
CONFIG_MFD_WM831X_I2C=y
CONFIG_MFD_WM8350=y
CONFIG_MFD_WM8350_I2C=y
CONFIG_MFD_WM8994=y
CONFIG_REGULATOR=y
CONFIG_REGULATOR_DEBUG=y
CONFIG_REGULATOR_FIXED_VOLTAGE=y
CONFIG_REGULATOR_VIRTUAL_CONSUMER=y
CONFIG_REGULATOR_USERSPACE_CONSUMER=y
CONFIG_REGULATOR_88PM800=y
CONFIG_REGULATOR_ACT8865=y
CONFIG_REGULATOR_ACT8945A=y
# CONFIG_REGULATOR_AD5398 is not set
CONFIG_REGULATOR_ANATOP=y
# CONFIG_REGULATOR_AS3711 is not set
CONFIG_REGULATOR_AS3722=y
CONFIG_REGULATOR_AXP20X=y
CONFIG_REGULATOR_DA9052=y
# CONFIG_REGULATOR_DA9055 is not set
# CONFIG_REGULATOR_DA9062 is not set
# CONFIG_REGULATOR_DA9210 is not set
CONFIG_REGULATOR_DA9211=y
CONFIG_REGULATOR_FAN53555=y
# CONFIG_REGULATOR_GPIO is not set
# CONFIG_REGULATOR_HI6421 is not set
# CONFIG_REGULATOR_ISL9305 is not set
CONFIG_REGULATOR_ISL6271A=y
CONFIG_REGULATOR_LP3971=y
# CONFIG_REGULATOR_LP3972 is not set
CONFIG_REGULATOR_LP872X=y
# CONFIG_REGULATOR_LP8755 is not set
CONFIG_REGULATOR_LP8788=y
CONFIG_REGULATOR_LTC3589=y
CONFIG_REGULATOR_LTC3676=y
# CONFIG_REGULATOR_MAX1586 is not set
CONFIG_REGULATOR_MAX8649=y
CONFIG_REGULATOR_MAX8660=y
# CONFIG_REGULATOR_MAX8907 is not set
CONFIG_REGULATOR_MAX8925=y
CONFIG_REGULATOR_MAX8952=y
# CONFIG_REGULATOR_MAX8973 is not set
# CONFIG_REGULATOR_MAX8997 is not set
CONFIG_REGULATOR_MAX8998=y
CONFIG_REGULATOR_MAX77686=y
CONFIG_REGULATOR_MAX77693=y
# CONFIG_REGULATOR_MAX77802 is not set
CONFIG_REGULATOR_MC13XXX_CORE=y
CONFIG_REGULATOR_MC13783=y
CONFIG_REGULATOR_MC13892=y
# CONFIG_REGULATOR_MT6311 is not set
CONFIG_REGULATOR_MT6323=y
# CONFIG_REGULATOR_MT6397 is not set
CONFIG_REGULATOR_PALMAS=y
CONFIG_REGULATOR_PCF50633=y
CONFIG_REGULATOR_PFUZE100=y
# CONFIG_REGULATOR_PV88060 is not set
# CONFIG_REGULATOR_PV88080 is not set
# CONFIG_REGULATOR_PV88090 is not set
CONFIG_REGULATOR_PWM=y
# CONFIG_REGULATOR_RC5T583 is not set
CONFIG_REGULATOR_RK808=y
CONFIG_REGULATOR_RT5033=y
CONFIG_REGULATOR_TPS51632=y
# CONFIG_REGULATOR_TPS6105X is not set
# CONFIG_REGULATOR_TPS62360 is not set
CONFIG_REGULATOR_TPS65023=y
# CONFIG_REGULATOR_TPS6507X is not set
CONFIG_REGULATOR_TPS65086=y
# CONFIG_REGULATOR_TPS65090 is not set
CONFIG_REGULATOR_TPS65218=y
CONFIG_REGULATOR_TPS6586X=y
CONFIG_REGULATOR_TPS65912=y
CONFIG_REGULATOR_TWL4030=y
CONFIG_REGULATOR_WM831X=y
# CONFIG_REGULATOR_WM8350 is not set
CONFIG_REGULATOR_WM8994=y
# CONFIG_MEDIA_SUPPORT is not set

#
# Graphics support
#
# CONFIG_AGP is not set
CONFIG_VGA_ARB=y
CONFIG_VGA_ARB_MAX_GPUS=16
# CONFIG_VGA_SWITCHEROO is not set
# CONFIG_DRM is not set

#
# ACP (Audio CoProcessor) Configuration
#
# CONFIG_DRM_LIB_RANDOM is not set

#
# Frame buffer Devices
#
CONFIG_FB=y
CONFIG_FIRMWARE_EDID=y
CONFIG_FB_CMDLINE=y
CONFIG_FB_NOTIFY=y
# CONFIG_FB_DDC is not set
CONFIG_FB_BOOT_VESA_SUPPORT=y
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
CONFIG_FB_SYS_FILLRECT=y
CONFIG_FB_SYS_COPYAREA=y
CONFIG_FB_SYS_IMAGEBLIT=y
# CONFIG_FB_PROVIDE_GET_FB_UNMAPPED_AREA is not set
CONFIG_FB_FOREIGN_ENDIAN=y
CONFIG_FB_BOTH_ENDIAN=y
# CONFIG_FB_BIG_ENDIAN is not set
# CONFIG_FB_LITTLE_ENDIAN is not set
CONFIG_FB_SYS_FOPS=y
CONFIG_FB_DEFERRED_IO=y
# CONFIG_FB_SVGALIB is not set
# CONFIG_FB_MACMODES is not set
CONFIG_FB_BACKLIGHT=y
CONFIG_FB_MODE_HELPERS=y
CONFIG_FB_TILEBLITTING=y

#
# Frame buffer hardware drivers
#
# CONFIG_FB_CIRRUS is not set
# CONFIG_FB_PM2 is not set
# CONFIG_FB_CYBER2000 is not set
CONFIG_FB_ARC=y
# CONFIG_FB_ASILIANT is not set
# CONFIG_FB_IMSTT is not set
# CONFIG_FB_VGA16 is not set
CONFIG_FB_VESA=y
# CONFIG_FB_N411 is not set
CONFIG_FB_HGA=y
# CONFIG_FB_OPENCORES is not set
CONFIG_FB_S1D13XXX=y
# CONFIG_FB_NVIDIA is not set
# CONFIG_FB_RIVA is not set
# CONFIG_FB_I740 is not set
# CONFIG_FB_LE80578 is not set
# CONFIG_FB_MATROX is not set
# CONFIG_FB_RADEON is not set
# CONFIG_FB_ATY128 is not set
# CONFIG_FB_ATY is not set
# CONFIG_FB_S3 is not set
# CONFIG_FB_SAVAGE is not set
# CONFIG_FB_SIS is not set
# CONFIG_FB_VIA is not set
# CONFIG_FB_NEOMAGIC is not set
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_VT8623 is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_ARK is not set
# CONFIG_FB_PM3 is not set
# CONFIG_FB_CARMINE is not set
# CONFIG_FB_GEODE is not set
CONFIG_FB_SM501=y
# CONFIG_FB_SMSCUFX is not set
CONFIG_FB_UDL=y
CONFIG_FB_IBM_GXT4500=y
# CONFIG_FB_VIRTUAL is not set
CONFIG_FB_METRONOME=y
# CONFIG_FB_MB862XX is not set
CONFIG_FB_BROADSHEET=y
CONFIG_FB_AUO_K190X=y
# CONFIG_FB_AUO_K1900 is not set
# CONFIG_FB_AUO_K1901 is not set
# CONFIG_FB_SIMPLE is not set
CONFIG_FB_SSD1307=y
# CONFIG_FB_SM712 is not set
CONFIG_BACKLIGHT_LCD_SUPPORT=y
CONFIG_LCD_CLASS_DEVICE=y
CONFIG_LCD_PLATFORM=y
CONFIG_BACKLIGHT_CLASS_DEVICE=y
# CONFIG_BACKLIGHT_GENERIC is not set
# CONFIG_BACKLIGHT_LM3533 is not set
CONFIG_BACKLIGHT_PWM=y
CONFIG_BACKLIGHT_DA9052=y
CONFIG_BACKLIGHT_MAX8925=y
# CONFIG_BACKLIGHT_APPLE is not set
# CONFIG_BACKLIGHT_PM8941_WLED is not set
CONFIG_BACKLIGHT_SAHARA=y
CONFIG_BACKLIGHT_WM831X=y
# CONFIG_BACKLIGHT_ADP8860 is not set
CONFIG_BACKLIGHT_ADP8870=y
# CONFIG_BACKLIGHT_PCF50633 is not set
# CONFIG_BACKLIGHT_LM3630A is not set
CONFIG_BACKLIGHT_LM3639=y
CONFIG_BACKLIGHT_LP855X=y
CONFIG_BACKLIGHT_LP8788=y
CONFIG_BACKLIGHT_PANDORA=y
CONFIG_BACKLIGHT_AS3711=y
CONFIG_BACKLIGHT_GPIO=y
CONFIG_BACKLIGHT_LV5207LP=y
CONFIG_BACKLIGHT_BD6107=y
# CONFIG_VGASTATE is not set
# CONFIG_LOGO is not set
# CONFIG_SOUND is not set

#
# HID support
#
CONFIG_HID=y
CONFIG_HID_BATTERY_STRENGTH=y
# CONFIG_HIDRAW is not set
CONFIG_UHID=y
# CONFIG_HID_GENERIC is not set

#
# Special HID drivers
#
CONFIG_HID_A4TECH=y
CONFIG_HID_ACRUX=y
CONFIG_HID_ACRUX_FF=y
CONFIG_HID_APPLE=y
# CONFIG_HID_APPLEIR is not set
CONFIG_HID_ASUS=y
CONFIG_HID_AUREAL=y
# CONFIG_HID_BELKIN is not set
CONFIG_HID_BETOP_FF=y
# CONFIG_HID_CHERRY is not set
CONFIG_HID_CHICONY=y
# CONFIG_HID_CORSAIR is not set
CONFIG_HID_CMEDIA=y
# CONFIG_HID_CP2112 is not set
# CONFIG_HID_CYPRESS is not set
# CONFIG_HID_DRAGONRISE is not set
CONFIG_HID_EMS_FF=y
CONFIG_HID_ELECOM=y
CONFIG_HID_ELO=y
# CONFIG_HID_EZKEY is not set
# CONFIG_HID_GEMBIRD is not set
CONFIG_HID_GFRM=y
CONFIG_HID_HOLTEK=y
# CONFIG_HOLTEK_FF is not set
CONFIG_HID_GT683R=y
CONFIG_HID_KEYTOUCH=y
# CONFIG_HID_KYE is not set
CONFIG_HID_UCLOGIC=y
CONFIG_HID_WALTOP=y
CONFIG_HID_GYRATION=y
CONFIG_HID_ICADE=y
CONFIG_HID_TWINHAN=y
CONFIG_HID_KENSINGTON=y
# CONFIG_HID_LCPOWER is not set
CONFIG_HID_LED=y
CONFIG_HID_LENOVO=y
# CONFIG_HID_LOGITECH is not set
CONFIG_HID_MAGICMOUSE=y
CONFIG_HID_MAYFLASH=y
CONFIG_HID_MICROSOFT=y
CONFIG_HID_MONTEREY=y
CONFIG_HID_MULTITOUCH=y
# CONFIG_HID_NTRIG is not set
# CONFIG_HID_ORTEK is not set
CONFIG_HID_PANTHERLORD=y
CONFIG_PANTHERLORD_FF=y
# CONFIG_HID_PENMOUNT is not set
CONFIG_HID_PETALYNX=y
CONFIG_HID_PICOLCD=y
CONFIG_HID_PICOLCD_FB=y
# CONFIG_HID_PICOLCD_BACKLIGHT is not set
CONFIG_HID_PICOLCD_LCD=y
CONFIG_HID_PICOLCD_LEDS=y
# CONFIG_HID_PLANTRONICS is not set
CONFIG_HID_PRIMAX=y
# CONFIG_HID_ROCCAT is not set
CONFIG_HID_SAITEK=y
CONFIG_HID_SAMSUNG=y
CONFIG_HID_SONY=y
CONFIG_SONY_FF=y
CONFIG_HID_SPEEDLINK=y
# CONFIG_HID_STEELSERIES is not set
CONFIG_HID_SUNPLUS=y
# CONFIG_HID_RMI is not set
CONFIG_HID_GREENASIA=y
CONFIG_GREENASIA_FF=y
CONFIG_HID_SMARTJOYPLUS=y
# CONFIG_SMARTJOYPLUS_FF is not set
CONFIG_HID_TIVO=y
# CONFIG_HID_TOPSEED is not set
CONFIG_HID_THINGM=y
CONFIG_HID_THRUSTMASTER=y
# CONFIG_THRUSTMASTER_FF is not set
CONFIG_HID_UDRAW_PS3=y
# CONFIG_HID_WACOM is not set
# CONFIG_HID_WIIMOTE is not set
CONFIG_HID_XINMO=y
CONFIG_HID_ZEROPLUS=y
CONFIG_ZEROPLUS_FF=y
# CONFIG_HID_ZYDACRON is not set
CONFIG_HID_SENSOR_HUB=y
CONFIG_HID_SENSOR_CUSTOM_SENSOR=y
CONFIG_HID_ALPS=y

#
# USB HID support
#
CONFIG_USB_HID=y
CONFIG_HID_PID=y
# CONFIG_USB_HIDDEV is not set

#
# I2C HID support
#
CONFIG_I2C_HID=y
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_USB_SUPPORT=y
CONFIG_USB_COMMON=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB=y
# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set

#
# Miscellaneous USB options
#
# CONFIG_USB_DEFAULT_PERSIST is not set
CONFIG_USB_DYNAMIC_MINORS=y
# CONFIG_USB_OTG_WHITELIST is not set
CONFIG_USB_OTG_BLACKLIST_HUB=y
CONFIG_USB_MON=y
CONFIG_USB_WUSB=y
CONFIG_USB_WUSB_CBAF=y
CONFIG_USB_WUSB_CBAF_DEBUG=y

#
# USB Host Controller Drivers
#
# CONFIG_USB_C67X00_HCD is not set
# CONFIG_USB_XHCI_HCD is not set
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_ROOT_HUB_TT=y
CONFIG_USB_EHCI_TT_NEWSCHED=y
CONFIG_USB_EHCI_PCI=y
CONFIG_USB_EHCI_HCD_PLATFORM=y
CONFIG_USB_OXU210HP_HCD=y
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_ISP1362_HCD is not set
# CONFIG_USB_FOTG210_HCD is not set
CONFIG_USB_OHCI_HCD=y
CONFIG_USB_OHCI_HCD_PCI=y
# CONFIG_USB_OHCI_HCD_SSB is not set
CONFIG_USB_OHCI_HCD_PLATFORM=y
# CONFIG_USB_UHCI_HCD is not set
CONFIG_USB_SL811_HCD=y
CONFIG_USB_SL811_HCD_ISO=y
CONFIG_USB_R8A66597_HCD=y
# CONFIG_USB_WHCI_HCD is not set
CONFIG_USB_HWA_HCD=y
CONFIG_USB_HCD_SSB=y
CONFIG_USB_HCD_TEST_MODE=y

#
# USB Device Class drivers
#
# CONFIG_USB_ACM is not set
# CONFIG_USB_PRINTER is not set
CONFIG_USB_WDM=y
CONFIG_USB_TMC=y

#
# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#

#
# also be needed; see USB_STORAGE Help for more info
#
CONFIG_USB_STORAGE=y
CONFIG_USB_STORAGE_DEBUG=y
CONFIG_USB_STORAGE_REALTEK=y
CONFIG_USB_STORAGE_DATAFAB=y
# CONFIG_USB_STORAGE_FREECOM is not set
CONFIG_USB_STORAGE_ISD200=y
# CONFIG_USB_STORAGE_USBAT is not set
# CONFIG_USB_STORAGE_SDDR09 is not set
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set
# CONFIG_USB_STORAGE_ALAUDA is not set
# CONFIG_USB_STORAGE_ONETOUCH is not set
CONFIG_USB_STORAGE_KARMA=y
CONFIG_USB_STORAGE_CYPRESS_ATACB=y
# CONFIG_USB_STORAGE_ENE_UB6250 is not set
CONFIG_USB_UAS=y

#
# USB Imaging devices
#
CONFIG_USB_MDC800=y
CONFIG_USB_MICROTEK=y
# CONFIG_USBIP_CORE is not set
CONFIG_USB_MUSB_HDRC=y
# CONFIG_USB_MUSB_HOST is not set
CONFIG_USB_MUSB_GADGET=y
# CONFIG_USB_MUSB_DUAL_ROLE is not set

#
# Platform Glue Layer
#

#
# MUSB DMA mode
#
# CONFIG_MUSB_PIO_ONLY is not set
# CONFIG_USB_DWC3 is not set
CONFIG_USB_DWC2=y
# CONFIG_USB_DWC2_HOST is not set

#
# Gadget/Dual-role mode requires USB Gadget support to be enabled
#
CONFIG_USB_DWC2_PERIPHERAL=y
# CONFIG_USB_DWC2_DUAL_ROLE is not set
# CONFIG_USB_DWC2_PCI is not set
# CONFIG_USB_DWC2_DEBUG is not set
# CONFIG_USB_DWC2_TRACK_MISSED_SOFS is not set
# CONFIG_USB_CHIPIDEA is not set
CONFIG_USB_ISP1760=y
CONFIG_USB_ISP1760_HCD=y
CONFIG_USB_ISP1760_HOST_ROLE=y
# CONFIG_USB_ISP1760_GADGET_ROLE is not set
# CONFIG_USB_ISP1760_DUAL_ROLE is not set

#
# USB port drivers
#
# CONFIG_USB_USS720 is not set
CONFIG_USB_SERIAL=y
CONFIG_USB_SERIAL_CONSOLE=y
CONFIG_USB_SERIAL_GENERIC=y
# CONFIG_USB_SERIAL_SIMPLE is not set
CONFIG_USB_SERIAL_AIRCABLE=y
# CONFIG_USB_SERIAL_ARK3116 is not set
CONFIG_USB_SERIAL_BELKIN=y
# CONFIG_USB_SERIAL_CH341 is not set
# CONFIG_USB_SERIAL_WHITEHEAT is not set
# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
CONFIG_USB_SERIAL_CP210X=y
CONFIG_USB_SERIAL_CYPRESS_M8=y
# CONFIG_USB_SERIAL_EMPEG is not set
CONFIG_USB_SERIAL_FTDI_SIO=y
CONFIG_USB_SERIAL_VISOR=y
CONFIG_USB_SERIAL_IPAQ=y
CONFIG_USB_SERIAL_IR=y
# CONFIG_USB_SERIAL_EDGEPORT is not set
CONFIG_USB_SERIAL_EDGEPORT_TI=y
CONFIG_USB_SERIAL_F81232=y
CONFIG_USB_SERIAL_F8153X=y
# CONFIG_USB_SERIAL_GARMIN is not set
CONFIG_USB_SERIAL_IPW=y
# CONFIG_USB_SERIAL_IUU is not set
# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
CONFIG_USB_SERIAL_KEYSPAN=y
CONFIG_USB_SERIAL_KEYSPAN_MPR=y
# CONFIG_USB_SERIAL_KEYSPAN_USA28 is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA28X is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA28XA is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA28XB is not set
CONFIG_USB_SERIAL_KEYSPAN_USA19=y
# CONFIG_USB_SERIAL_KEYSPAN_USA18X is not set
CONFIG_USB_SERIAL_KEYSPAN_USA19W=y
CONFIG_USB_SERIAL_KEYSPAN_USA19QW=y
# CONFIG_USB_SERIAL_KEYSPAN_USA19QI is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA49W is not set
CONFIG_USB_SERIAL_KEYSPAN_USA49WLC=y
# CONFIG_USB_SERIAL_KLSI is not set
CONFIG_USB_SERIAL_KOBIL_SCT=y
CONFIG_USB_SERIAL_MCT_U232=y
# CONFIG_USB_SERIAL_METRO is not set
# CONFIG_USB_SERIAL_MOS7720 is not set
# CONFIG_USB_SERIAL_MOS7840 is not set
# CONFIG_USB_SERIAL_MXUPORT is not set
# CONFIG_USB_SERIAL_NAVMAN is not set
CONFIG_USB_SERIAL_PL2303=y
CONFIG_USB_SERIAL_OTI6858=y
CONFIG_USB_SERIAL_QCAUX=y
CONFIG_USB_SERIAL_QUALCOMM=y
# CONFIG_USB_SERIAL_SPCP8X5 is not set
CONFIG_USB_SERIAL_SAFE=y
# CONFIG_USB_SERIAL_SAFE_PADDED is not set
CONFIG_USB_SERIAL_SIERRAWIRELESS=y
CONFIG_USB_SERIAL_SYMBOL=y
# CONFIG_USB_SERIAL_TI is not set
CONFIG_USB_SERIAL_CYBERJACK=y
CONFIG_USB_SERIAL_XIRCOM=y
CONFIG_USB_SERIAL_WWAN=y
CONFIG_USB_SERIAL_OPTION=y
# CONFIG_USB_SERIAL_OMNINET is not set
# CONFIG_USB_SERIAL_OPTICON is not set
CONFIG_USB_SERIAL_XSENS_MT=y
CONFIG_USB_SERIAL_WISHBONE=y
CONFIG_USB_SERIAL_SSU100=y
CONFIG_USB_SERIAL_QT2=y
# CONFIG_USB_SERIAL_UPD78F0730 is not set
# CONFIG_USB_SERIAL_DEBUG is not set

#
# USB Miscellaneous drivers
#
CONFIG_USB_EMI62=y
CONFIG_USB_EMI26=y
# CONFIG_USB_ADUTUX is not set
# CONFIG_USB_SEVSEG is not set
# CONFIG_USB_RIO500 is not set
CONFIG_USB_LEGOTOWER=y
# CONFIG_USB_LCD is not set
CONFIG_USB_CYPRESS_CY7C63=y
# CONFIG_USB_CYTHERM is not set
CONFIG_USB_IDMOUSE=y
# CONFIG_USB_FTDI_ELAN is not set
CONFIG_USB_APPLEDISPLAY=y
CONFIG_USB_SISUSBVGA=y
CONFIG_USB_LD=y
CONFIG_USB_TRANCEVIBRATOR=y
# CONFIG_USB_IOWARRIOR is not set
CONFIG_USB_TEST=y
CONFIG_USB_EHSET_TEST_FIXTURE=y
CONFIG_USB_ISIGHTFW=y
# CONFIG_USB_YUREX is not set
CONFIG_USB_EZUSB_FX2=y
CONFIG_USB_HUB_USB251XB=y
CONFIG_USB_HSIC_USB3503=y
CONFIG_USB_HSIC_USB4604=y
# CONFIG_USB_LINK_LAYER_TEST is not set
CONFIG_USB_CHAOSKEY=y
# CONFIG_UCSI is not set

#
# USB Physical Layer drivers
#
CONFIG_USB_PHY=y
CONFIG_NOP_USB_XCEIV=y
CONFIG_USB_GPIO_VBUS=y
CONFIG_TAHVO_USB=y
# CONFIG_TAHVO_USB_HOST_BY_DEFAULT is not set
CONFIG_USB_ISP1301=y
CONFIG_USB_GADGET=y
CONFIG_USB_GADGET_DEBUG=y
# CONFIG_USB_GADGET_VERBOSE is not set
# CONFIG_USB_GADGET_DEBUG_FILES is not set
CONFIG_USB_GADGET_DEBUG_FS=y
CONFIG_USB_GADGET_VBUS_DRAW=2
CONFIG_USB_GADGET_STORAGE_NUM_BUFFERS=2
CONFIG_U_SERIAL_CONSOLE=y

#
# USB Peripheral Controller
#
CONFIG_USB_FUSB300=y
CONFIG_USB_FOTG210_UDC=y
CONFIG_USB_GR_UDC=y
CONFIG_USB_R8A66597=y
# CONFIG_USB_PXA27X is not set
# CONFIG_USB_MV_UDC is not set
CONFIG_USB_MV_U3D=y
CONFIG_USB_M66592=y
CONFIG_USB_BDC_UDC=y

#
# Platform Support
#
CONFIG_USB_BDC_PCI=y
# CONFIG_USB_AMD5536UDC is not set
# CONFIG_USB_NET2272 is not set
# CONFIG_USB_NET2280 is not set
# CONFIG_USB_GOKU is not set
# CONFIG_USB_EG20T is not set
CONFIG_USB_GADGET_XILINX=y
# CONFIG_USB_DUMMY_HCD is not set
CONFIG_USB_LIBCOMPOSITE=y
CONFIG_USB_F_ACM=y
CONFIG_USB_U_SERIAL=y
CONFIG_USB_F_SERIAL=y
CONFIG_USB_F_OBEX=y
CONFIG_USB_F_TCM=y
CONFIG_USB_CONFIGFS=y
# CONFIG_USB_CONFIGFS_SERIAL is not set
# CONFIG_USB_CONFIGFS_ACM is not set
CONFIG_USB_CONFIGFS_OBEX=y
# CONFIG_USB_CONFIGFS_NCM is not set
# CONFIG_USB_CONFIGFS_ECM is not set
# CONFIG_USB_CONFIGFS_ECM_SUBSET is not set
# CONFIG_USB_CONFIGFS_RNDIS is not set
# CONFIG_USB_CONFIGFS_EEM is not set
# CONFIG_USB_CONFIGFS_MASS_STORAGE is not set
# CONFIG_USB_CONFIGFS_F_LB_SS is not set
# CONFIG_USB_CONFIGFS_F_FS is not set
# CONFIG_USB_CONFIGFS_F_HID is not set
# CONFIG_USB_CONFIGFS_F_PRINTER is not set
CONFIG_USB_CONFIGFS_F_TCM=y
# CONFIG_USB_ZERO is not set
# CONFIG_USB_ETH is not set
# CONFIG_USB_G_NCM is not set
# CONFIG_USB_GADGETFS is not set
# CONFIG_USB_FUNCTIONFS is not set
# CONFIG_USB_MASS_STORAGE is not set
# CONFIG_USB_GADGET_TARGET is not set
CONFIG_USB_G_SERIAL=y
# CONFIG_USB_G_PRINTER is not set
# CONFIG_USB_CDC_COMPOSITE is not set
# CONFIG_USB_G_ACM_MS is not set
# CONFIG_USB_G_MULTI is not set
# CONFIG_USB_G_HID is not set
# CONFIG_USB_G_DBGP is not set
CONFIG_USB_ULPI_BUS=y
CONFIG_UWB=y
CONFIG_UWB_HWA=y
# CONFIG_UWB_WHCI is not set
CONFIG_UWB_I1480U=y
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
# CONFIG_LEDS_CLASS_FLASH is not set
# CONFIG_LEDS_BRIGHTNESS_HW_CHANGED is not set

#
# LED drivers
#
CONFIG_LEDS_BCM6328=y
CONFIG_LEDS_BCM6358=y
# CONFIG_LEDS_LM3530 is not set
CONFIG_LEDS_LM3533=y
CONFIG_LEDS_LM3642=y
CONFIG_LEDS_NET48XX=y
# CONFIG_LEDS_WRAP is not set
CONFIG_LEDS_PCA9532=y
# CONFIG_LEDS_PCA9532_GPIO is not set
# CONFIG_LEDS_GPIO is not set
CONFIG_LEDS_LP3944=y
# CONFIG_LEDS_LP3952 is not set
CONFIG_LEDS_LP55XX_COMMON=y
# CONFIG_LEDS_LP5521 is not set
CONFIG_LEDS_LP5523=y
CONFIG_LEDS_LP5562=y
CONFIG_LEDS_LP8501=y
CONFIG_LEDS_LP8788=y
CONFIG_LEDS_LP8860=y
CONFIG_LEDS_CLEVO_MAIL=y
CONFIG_LEDS_PCA955X=y
CONFIG_LEDS_PCA963X=y
# CONFIG_LEDS_WM831X_STATUS is not set
# CONFIG_LEDS_WM8350 is not set
# CONFIG_LEDS_DA9052 is not set
CONFIG_LEDS_PWM=y
CONFIG_LEDS_REGULATOR=y
CONFIG_LEDS_BD2802=y
# CONFIG_LEDS_INTEL_SS4200 is not set
CONFIG_LEDS_LT3593=y
# CONFIG_LEDS_MC13783 is not set
CONFIG_LEDS_TCA6507=y
# CONFIG_LEDS_TLC591XX is not set
# CONFIG_LEDS_MAX8997 is not set
CONFIG_LEDS_LM355x=y
CONFIG_LEDS_OT200=y
CONFIG_LEDS_MENF21BMC=y
CONFIG_LEDS_IS31FL319X=y
CONFIG_LEDS_IS31FL32XX=y

#
# LED driver for blink(1) USB RGB LED is under Special HID drivers (HID_THINGM)
#
CONFIG_LEDS_BLINKM=y
CONFIG_LEDS_SYSCON=y
# CONFIG_LEDS_USER is not set
# CONFIG_LEDS_NIC78BX is not set

#
# LED Triggers
#
# CONFIG_LEDS_TRIGGERS is not set
CONFIG_ACCESSIBILITY=y
CONFIG_EDAC_ATOMIC_SCRUB=y
CONFIG_EDAC_SUPPORT=y
CONFIG_EDAC=y
CONFIG_EDAC_LEGACY_SYSFS=y
# CONFIG_EDAC_DEBUG is not set
CONFIG_EDAC_MM_EDAC=y
# CONFIG_EDAC_AMD76X is not set
# CONFIG_EDAC_E7XXX is not set
# CONFIG_EDAC_E752X is not set
# CONFIG_EDAC_I82875P is not set
# CONFIG_EDAC_I82975X is not set
# CONFIG_EDAC_I3000 is not set
# CONFIG_EDAC_I3200 is not set
# CONFIG_EDAC_IE31200 is not set
# CONFIG_EDAC_X38 is not set
# CONFIG_EDAC_I5400 is not set
# CONFIG_EDAC_I82860 is not set
# CONFIG_EDAC_R82600 is not set
# CONFIG_EDAC_I5000 is not set
# CONFIG_EDAC_I5100 is not set
# CONFIG_EDAC_I7300 is not set
CONFIG_RTC_LIB=y
CONFIG_RTC_MC146818_LIB=y
CONFIG_RTC_CLASS=y
# CONFIG_RTC_HCTOSYS is not set
# CONFIG_RTC_SYSTOHC is not set
# CONFIG_RTC_DEBUG is not set

#
# RTC interfaces
#
CONFIG_RTC_INTF_SYSFS=y
CONFIG_RTC_INTF_PROC=y
CONFIG_RTC_INTF_DEV=y
# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
# CONFIG_RTC_DRV_TEST is not set

#
# I2C RTC drivers
#
CONFIG_RTC_DRV_88PM80X=y
CONFIG_RTC_DRV_ABB5ZES3=y
CONFIG_RTC_DRV_ABX80X=y
CONFIG_RTC_DRV_AS3722=y
CONFIG_RTC_DRV_DS1307=y
CONFIG_RTC_DRV_DS1307_HWMON=y
CONFIG_RTC_DRV_DS1307_CENTURY=y
CONFIG_RTC_DRV_DS1374=y
# CONFIG_RTC_DRV_DS1374_WDT is not set
CONFIG_RTC_DRV_DS1672=y
CONFIG_RTC_DRV_HYM8563=y
CONFIG_RTC_DRV_LP8788=y
# CONFIG_RTC_DRV_MAX6900 is not set
CONFIG_RTC_DRV_MAX8907=y
# CONFIG_RTC_DRV_MAX8925 is not set
CONFIG_RTC_DRV_MAX8998=y
# CONFIG_RTC_DRV_MAX8997 is not set
CONFIG_RTC_DRV_MAX77686=y
# CONFIG_RTC_DRV_RK808 is not set
CONFIG_RTC_DRV_RS5C372=y
CONFIG_RTC_DRV_ISL1208=y
# CONFIG_RTC_DRV_ISL12022 is not set
CONFIG_RTC_DRV_X1205=y
CONFIG_RTC_DRV_PCF8523=y
CONFIG_RTC_DRV_PCF85063=y
CONFIG_RTC_DRV_PCF8563=y
CONFIG_RTC_DRV_PCF8583=y
# CONFIG_RTC_DRV_M41T80 is not set
CONFIG_RTC_DRV_BQ32K=y
# CONFIG_RTC_DRV_TWL4030 is not set
CONFIG_RTC_DRV_PALMAS=y
# CONFIG_RTC_DRV_TPS6586X is not set
CONFIG_RTC_DRV_RC5T583=y
CONFIG_RTC_DRV_S35390A=y
CONFIG_RTC_DRV_FM3130=y
CONFIG_RTC_DRV_RX8010=y
CONFIG_RTC_DRV_RX8581=y
CONFIG_RTC_DRV_RX8025=y
CONFIG_RTC_DRV_EM3027=y
# CONFIG_RTC_DRV_RV8803 is not set

#
# SPI RTC drivers
#
CONFIG_RTC_I2C_AND_SPI=y

#
# SPI and I2C RTC drivers
#
CONFIG_RTC_DRV_DS3232=y
# CONFIG_RTC_DRV_PCF2127 is not set
CONFIG_RTC_DRV_RV3029C2=y
CONFIG_RTC_DRV_RV3029_HWMON=y

#
# Platform RTC drivers
#
# CONFIG_RTC_DRV_CMOS is not set
CONFIG_RTC_DRV_DS1286=y
# CONFIG_RTC_DRV_DS1511 is not set
CONFIG_RTC_DRV_DS1553=y
# CONFIG_RTC_DRV_DS1685_FAMILY is not set
# CONFIG_RTC_DRV_DS1742 is not set
CONFIG_RTC_DRV_DS2404=y
CONFIG_RTC_DRV_DA9052=y
# CONFIG_RTC_DRV_DA9055 is not set
CONFIG_RTC_DRV_DA9063=y
CONFIG_RTC_DRV_STK17TA8=y
CONFIG_RTC_DRV_M48T86=y
CONFIG_RTC_DRV_M48T35=y
# CONFIG_RTC_DRV_M48T59 is not set
CONFIG_RTC_DRV_MSM6242=y
CONFIG_RTC_DRV_BQ4802=y
CONFIG_RTC_DRV_RP5C01=y
CONFIG_RTC_DRV_V3020=y
# CONFIG_RTC_DRV_WM831X is not set
CONFIG_RTC_DRV_WM8350=y
# CONFIG_RTC_DRV_PCF50633 is not set
CONFIG_RTC_DRV_ZYNQMP=y

#
# on-CPU RTC drivers
#
CONFIG_RTC_DRV_MC13XXX=y
CONFIG_RTC_DRV_SNVS=y
CONFIG_RTC_DRV_MT6397=y
CONFIG_RTC_DRV_R7301=y

#
# HID Sensor RTC drivers
#
CONFIG_RTC_DRV_HID_SENSOR_TIME=y
CONFIG_DMADEVICES=y
# CONFIG_DMADEVICES_DEBUG is not set

#
# DMA Devices
#
CONFIG_DMA_ENGINE=y
CONFIG_DMA_VIRTUAL_CHANNELS=y
CONFIG_DMA_ACPI=y
CONFIG_DMA_OF=y
# CONFIG_FSL_EDMA is not set
CONFIG_INTEL_IDMA64=y
# CONFIG_PCH_DMA is not set
CONFIG_QCOM_HIDMA_MGMT=y
CONFIG_QCOM_HIDMA=y
CONFIG_DW_DMAC_CORE=y
CONFIG_DW_DMAC=y
# CONFIG_DW_DMAC_PCI is not set

#
# DMA Clients
#
# CONFIG_ASYNC_TX_DMA is not set
CONFIG_DMATEST=y

#
# DMABUF options
#
CONFIG_SYNC_FILE=y
# CONFIG_SW_SYNC is not set
CONFIG_AUXDISPLAY=y
# CONFIG_KS0108 is not set
CONFIG_IMG_ASCII_LCD=y
CONFIG_HT16K33=y
CONFIG_UIO=y
# CONFIG_UIO_CIF is not set
CONFIG_UIO_PDRV_GENIRQ=y
CONFIG_UIO_DMEM_GENIRQ=y
# CONFIG_UIO_AEC is not set
# CONFIG_UIO_SERCOS3 is not set
# CONFIG_UIO_PCI_GENERIC is not set
# CONFIG_UIO_NETX is not set
# CONFIG_UIO_PRUSS is not set
# CONFIG_UIO_MF624 is not set
# CONFIG_VIRT_DRIVERS is not set

#
# Virtio drivers
#
# CONFIG_VIRTIO_PCI is not set
# CONFIG_VIRTIO_MMIO is not set

#
# Microsoft Hyper-V guest support
#
# CONFIG_HYPERV is not set
# CONFIG_STAGING is not set
CONFIG_X86_PLATFORM_DEVICES=y
# CONFIG_ACERHDF is not set
# CONFIG_ASUS_LAPTOP is not set
CONFIG_DELL_SMBIOS=y
CONFIG_DELL_LAPTOP=y
# CONFIG_DELL_SMO8800 is not set
# CONFIG_FUJITSU_LAPTOP is not set
# CONFIG_FUJITSU_TABLET is not set
# CONFIG_HP_ACCEL is not set
# CONFIG_HP_WIRELESS is not set
# CONFIG_PANASONIC_LAPTOP is not set
# CONFIG_THINKPAD_ACPI is not set
# CONFIG_SENSORS_HDAPS is not set
# CONFIG_INTEL_MENLOW is not set
# CONFIG_ASUS_WIRELESS is not set
# CONFIG_ACPI_WMI is not set
# CONFIG_TOPSTAR_LAPTOP is not set
# CONFIG_TOSHIBA_BT_RFKILL is not set
# CONFIG_TOSHIBA_HAPS is not set
# CONFIG_ACPI_CMPC is not set
# CONFIG_INTEL_HID_EVENT is not set
# CONFIG_INTEL_VBTN is not set
# CONFIG_INTEL_IPS is not set
# CONFIG_INTEL_PMC_CORE is not set
# CONFIG_IBM_RTL is not set
# CONFIG_XO15_EBOOK is not set
# CONFIG_SAMSUNG_LAPTOP is not set
# CONFIG_SAMSUNG_Q10 is not set
# CONFIG_APPLE_GMUX is not set
# CONFIG_INTEL_RST is not set
# CONFIG_INTEL_SMARTCONNECT is not set
# CONFIG_PVPANIC is not set
# CONFIG_INTEL_PMC_IPC is not set
# CONFIG_SURFACE_PRO3_BUTTON is not set
CONFIG_INTEL_PUNIT_IPC=y
CONFIG_MLX_CPLD_PLATFORM=y
# CONFIG_SILEAD_DMI is not set
CONFIG_PMC_ATOM=y
# CONFIG_CHROME_PLATFORMS is not set
CONFIG_CLKDEV_LOOKUP=y
CONFIG_HAVE_CLK_PREPARE=y
CONFIG_COMMON_CLK=y

#
# Common Clock Framework
#
# CONFIG_COMMON_CLK_WM831X is not set
# CONFIG_COMMON_CLK_MAX77686 is not set
# CONFIG_COMMON_CLK_RK808 is not set
# CONFIG_COMMON_CLK_SI5351 is not set
# CONFIG_COMMON_CLK_SI514 is not set
# CONFIG_COMMON_CLK_SI570 is not set
# CONFIG_COMMON_CLK_CDCE706 is not set
# CONFIG_COMMON_CLK_CDCE925 is not set
# CONFIG_COMMON_CLK_CS2000_CP is not set
# CONFIG_CLK_TWL6040 is not set
# CONFIG_COMMON_CLK_NXP is not set
# CONFIG_COMMON_CLK_PALMAS is not set
# CONFIG_COMMON_CLK_PWM is not set
# CONFIG_COMMON_CLK_PXA is not set
# CONFIG_COMMON_CLK_PIC32 is not set
# CONFIG_COMMON_CLK_VC5 is not set

#
# Hardware Spinlock drivers
#

#
# Clock Source drivers
#
CONFIG_CLKSRC_I8253=y
CONFIG_CLKEVT_I8253=y
CONFIG_I8253_LOCK=y
CONFIG_CLKBLD_I8253=y
# CONFIG_ATMEL_PIT is not set
# CONFIG_SH_TIMER_CMT is not set
# CONFIG_SH_TIMER_MTU2 is not set
# CONFIG_SH_TIMER_TMU is not set
# CONFIG_EM_TIMER_STI is not set
# CONFIG_MAILBOX is not set
# CONFIG_IOMMU_SUPPORT is not set

#
# Remoteproc drivers
#
# CONFIG_REMOTEPROC is not set

#
# Rpmsg drivers
#

#
# SOC (System On Chip) specific Drivers
#

#
# Broadcom SoC drivers
#
# CONFIG_SUNXI_SRAM is not set
# CONFIG_SOC_TI is not set
# CONFIG_SOC_ZTE is not set
# CONFIG_PM_DEVFREQ is not set
CONFIG_EXTCON=y

#
# Extcon Device Drivers
#
CONFIG_EXTCON_ADC_JACK=y
CONFIG_EXTCON_AXP288=y
# CONFIG_EXTCON_GPIO is not set
# CONFIG_EXTCON_INTEL_INT3496 is not set
# CONFIG_EXTCON_MAX3355 is not set
CONFIG_EXTCON_MAX77693=y
# CONFIG_EXTCON_MAX8997 is not set
CONFIG_EXTCON_PALMAS=y
CONFIG_EXTCON_QCOM_SPMI_MISC=y
CONFIG_EXTCON_RT8973A=y
CONFIG_EXTCON_SM5502=y
# CONFIG_EXTCON_USB_GPIO is not set
# CONFIG_MEMORY is not set
CONFIG_IIO=y
CONFIG_IIO_BUFFER=y
CONFIG_IIO_BUFFER_CB=y
CONFIG_IIO_KFIFO_BUF=y
CONFIG_IIO_TRIGGERED_BUFFER=y
CONFIG_IIO_CONFIGFS=y
CONFIG_IIO_TRIGGER=y
CONFIG_IIO_CONSUMERS_PER_TRIGGER=2
CONFIG_IIO_SW_DEVICE=y
CONFIG_IIO_SW_TRIGGER=y

#
# Accelerometers
#
CONFIG_BMA180=y
CONFIG_BMC150_ACCEL=y
CONFIG_BMC150_ACCEL_I2C=y
CONFIG_DA280=y
CONFIG_DA311=y
CONFIG_DMARD06=y
CONFIG_DMARD09=y
CONFIG_DMARD10=y
CONFIG_HID_SENSOR_ACCEL_3D=y
# CONFIG_KXSD9 is not set
CONFIG_KXCJK1013=y
CONFIG_MC3230=y
CONFIG_MMA7455=y
CONFIG_MMA7455_I2C=y
CONFIG_MMA7660=y
CONFIG_MMA8452=y
CONFIG_MMA9551_CORE=y
CONFIG_MMA9551=y
CONFIG_MMA9553=y
# CONFIG_MXC4005 is not set
# CONFIG_MXC6255 is not set
CONFIG_STK8312=y
# CONFIG_STK8BA50 is not set

#
# Analog to digital converters
#
# CONFIG_AD7291 is not set
CONFIG_AD799X=y
# CONFIG_AXP288_ADC is not set
# CONFIG_CC10001_ADC is not set
CONFIG_DA9150_GPADC=y
# CONFIG_ENVELOPE_DETECTOR is not set
CONFIG_HX711=y
CONFIG_INA2XX_ADC=y
CONFIG_LP8788_ADC=y
CONFIG_LTC2485=y
# CONFIG_MAX1363 is not set
CONFIG_MCP3422=y
CONFIG_MEN_Z188_ADC=y
CONFIG_NAU7802=y
CONFIG_PALMAS_GPADC=y
CONFIG_STX104=y
CONFIG_TI_ADC081C=y
CONFIG_TI_ADS1015=y
CONFIG_TWL4030_MADC=y
CONFIG_TWL6030_GPADC=y
CONFIG_VF610_ADC=y

#
# Amplifiers
#

#
# Chemical Sensors
#
CONFIG_ATLAS_PH_SENSOR=y
CONFIG_IAQCORE=y
CONFIG_VZ89X=y

#
# Hid Sensor IIO Common
#
CONFIG_HID_SENSOR_IIO_COMMON=y
CONFIG_HID_SENSOR_IIO_TRIGGER=y
CONFIG_IIO_MS_SENSORS_I2C=y

#
# SSP Sensor Common
#
CONFIG_IIO_ST_SENSORS_I2C=y
CONFIG_IIO_ST_SENSORS_CORE=y

#
# Counters
#
CONFIG_104_QUAD_8=y

#
# Digital to analog converters
#
CONFIG_AD5064=y
# CONFIG_AD5380 is not set
CONFIG_AD5446=y
# CONFIG_AD5593R is not set
CONFIG_CIO_DAC=y
CONFIG_DPOT_DAC=y
# CONFIG_M62332 is not set
# CONFIG_MAX517 is not set
CONFIG_MAX5821=y
CONFIG_MCP4725=y
# CONFIG_VF610_DAC is not set

#
# IIO dummy driver
#
CONFIG_IIO_DUMMY_EVGEN=y
CONFIG_IIO_SIMPLE_DUMMY=y
CONFIG_IIO_SIMPLE_DUMMY_EVENTS=y
# CONFIG_IIO_SIMPLE_DUMMY_BUFFER is not set

#
# Frequency Synthesizers DDS/PLL
#

#
# Clock Generator/Distribution
#

#
# Phase-Locked Loop (PLL) frequency synthesizers
#

#
# Digital gyroscope sensors
#
# CONFIG_BMG160 is not set
# CONFIG_HID_SENSOR_GYRO_3D is not set
# CONFIG_MPU3050_I2C is not set
# CONFIG_IIO_ST_GYRO_3AXIS is not set
CONFIG_ITG3200=y

#
# Health Sensors
#

#
# Heart Rate Monitors
#
CONFIG_AFE4404=y
CONFIG_MAX30100=y

#
# Humidity sensors
#
CONFIG_AM2315=y
CONFIG_DHT11=y
CONFIG_HDC100X=y
CONFIG_HTS221=y
CONFIG_HTS221_I2C=y
CONFIG_HTU21=y
# CONFIG_SI7005 is not set
CONFIG_SI7020=y

#
# Inertial measurement units
#
# CONFIG_BMI160_I2C is not set
# CONFIG_KMX61 is not set
# CONFIG_INV_MPU6050_I2C is not set
# CONFIG_IIO_ST_LSM6DSX is not set

#
# Light sensors
#
# CONFIG_ACPI_ALS is not set
CONFIG_ADJD_S311=y
CONFIG_AL3320A=y
CONFIG_APDS9300=y
# CONFIG_APDS9960 is not set
CONFIG_BH1750=y
CONFIG_BH1780=y
CONFIG_CM32181=y
CONFIG_CM3232=y
CONFIG_CM3323=y
# CONFIG_CM3605 is not set
CONFIG_CM36651=y
CONFIG_GP2AP020A00F=y
CONFIG_SENSORS_ISL29018=y
CONFIG_ISL29125=y
CONFIG_HID_SENSOR_ALS=y
# CONFIG_HID_SENSOR_PROX is not set
CONFIG_JSA1212=y
CONFIG_RPR0521=y
CONFIG_SENSORS_LM3533=y
# CONFIG_LTR501 is not set
CONFIG_MAX44000=y
# CONFIG_OPT3001 is not set
CONFIG_PA12203001=y
# CONFIG_SI1145 is not set
# CONFIG_STK3310 is not set
# CONFIG_TCS3414 is not set
CONFIG_TCS3472=y
CONFIG_SENSORS_TSL2563=y
CONFIG_TSL2583=y
# CONFIG_TSL4531 is not set
# CONFIG_US5182D is not set
# CONFIG_VCNL4000 is not set
CONFIG_VEML6070=y

#
# Magnetometer sensors
#
CONFIG_AK8974=y
# CONFIG_AK8975 is not set
# CONFIG_AK09911 is not set
CONFIG_BMC150_MAGN=y
CONFIG_BMC150_MAGN_I2C=y
CONFIG_MAG3110=y
CONFIG_HID_SENSOR_MAGNETOMETER_3D=y
CONFIG_MMC35240=y
CONFIG_IIO_ST_MAGN_3AXIS=y
CONFIG_IIO_ST_MAGN_I2C_3AXIS=y
# CONFIG_SENSORS_HMC5843_I2C is not set

#
# Inclinometer sensors
#
# CONFIG_HID_SENSOR_INCLINOMETER_3D is not set
# CONFIG_HID_SENSOR_DEVICE_ROTATION is not set

#
# Triggers - standalone
#
# CONFIG_IIO_HRTIMER_TRIGGER is not set
# CONFIG_IIO_INTERRUPT_TRIGGER is not set
CONFIG_IIO_TIGHTLOOP_TRIGGER=y
# CONFIG_IIO_SYSFS_TRIGGER is not set

#
# Digital potentiometers
#
CONFIG_DS1803=y
CONFIG_MCP4531=y
CONFIG_TPL0102=y

#
# Digital potentiostats
#
CONFIG_LMP91000=y

#
# Pressure sensors
#
# CONFIG_ABP060MG is not set
CONFIG_BMP280=y
CONFIG_BMP280_I2C=y
CONFIG_HID_SENSOR_PRESS=y
CONFIG_HP03=y
# CONFIG_MPL115_I2C is not set
CONFIG_MPL3115=y
CONFIG_MS5611=y
CONFIG_MS5611_I2C=y
CONFIG_MS5637=y
CONFIG_IIO_ST_PRESS=y
CONFIG_IIO_ST_PRESS_I2C=y
# CONFIG_T5403 is not set
# CONFIG_HP206C is not set
CONFIG_ZPA2326=y
CONFIG_ZPA2326_I2C=y

#
# Lightning sensors
#

#
# Proximity and distance sensors
#
# CONFIG_LIDAR_LITE_V2 is not set
# CONFIG_SX9500 is not set
# CONFIG_SRF08 is not set

#
# Temperature sensors
#
# CONFIG_MLX90614 is not set
# CONFIG_TMP006 is not set
CONFIG_TMP007=y
CONFIG_TSYS01=y
CONFIG_TSYS02D=y
# CONFIG_NTB is not set
# CONFIG_VME_BUS is not set
CONFIG_PWM=y
CONFIG_PWM_SYSFS=y
# CONFIG_PWM_ATMEL_HLCDC_PWM is not set
CONFIG_PWM_CRC=y
CONFIG_PWM_FSL_FTM=y
# CONFIG_PWM_LP3943 is not set
# CONFIG_PWM_LPSS_PCI is not set
# CONFIG_PWM_LPSS_PLATFORM is not set
CONFIG_PWM_PCA9685=y
CONFIG_PWM_TWL=y
# CONFIG_PWM_TWL_LED is not set
CONFIG_IRQCHIP=y
CONFIG_ARM_GIC_MAX_NR=1
CONFIG_IPACK_BUS=y
# CONFIG_BOARD_TPCI200 is not set
CONFIG_SERIAL_IPOCTAL=y
CONFIG_RESET_CONTROLLER=y
# CONFIG_RESET_ATH79 is not set
# CONFIG_RESET_BERLIN is not set
# CONFIG_RESET_LPC18XX is not set
# CONFIG_RESET_MESON is not set
# CONFIG_RESET_PISTACHIO is not set
# CONFIG_RESET_SOCFPGA is not set
# CONFIG_RESET_STM32 is not set
# CONFIG_RESET_SUNXI is not set
CONFIG_TI_SYSCON_RESET=y
# CONFIG_RESET_ZYNQ is not set
# CONFIG_RESET_TEGRA_BPMP is not set
CONFIG_FMC=y
# CONFIG_FMC_FAKEDEV is not set
# CONFIG_FMC_TRIVIAL is not set
# CONFIG_FMC_WRITE_EEPROM is not set
# CONFIG_FMC_CHARDEV is not set

#
# PHY Subsystem
#
CONFIG_GENERIC_PHY=y
# CONFIG_PHY_PXA_28NM_HSIC is not set
# CONFIG_PHY_PXA_28NM_USB2 is not set
CONFIG_BCM_KONA_USB2_PHY=y
CONFIG_PHY_SAMSUNG_USB2=y
# CONFIG_PHY_EXYNOS4210_USB2 is not set
# CONFIG_PHY_EXYNOS4X12_USB2 is not set
# CONFIG_PHY_EXYNOS5250_USB2 is not set
CONFIG_PHY_QCOM_USB_HS=y
CONFIG_PHY_QCOM_USB_HSIC=y
CONFIG_PHY_TUSB1210=y
CONFIG_POWERCAP=y
CONFIG_INTEL_RAPL=y
CONFIG_MCB=y
# CONFIG_MCB_PCI is not set
CONFIG_MCB_LPC=y

#
# Performance monitor support
#
CONFIG_RAS=y
# CONFIG_THUNDERBOLT is not set

#
# Android
#
# CONFIG_ANDROID is not set
CONFIG_DEV_DAX=y
CONFIG_NR_DEV_DAX=32768
CONFIG_NVMEM=y
CONFIG_STM=y
# CONFIG_STM_DUMMY is not set
CONFIG_STM_SOURCE_CONSOLE=y
# CONFIG_STM_SOURCE_HEARTBEAT is not set
# CONFIG_INTEL_TH is not set

#
# FPGA Configuration Support
#
CONFIG_FPGA=y
# CONFIG_FPGA_BRIDGE is not set

#
# FSI support
#
# CONFIG_FSI is not set

#
# Firmware Drivers
#
# CONFIG_EDD is not set
# CONFIG_FIRMWARE_MEMMAP is not set
CONFIG_DELL_RBU=y
CONFIG_DCDBAS=y
CONFIG_DMIID=y
CONFIG_DMI_SYSFS=y
CONFIG_DMI_SCAN_MACHINE_NON_EFI_FALLBACK=y
# CONFIG_ISCSI_IBFT_FIND is not set
# CONFIG_FW_CFG_SYSFS is not set
CONFIG_GOOGLE_FIRMWARE=y

#
# Google Firmware Drivers
#
CONFIG_GOOGLE_MEMCONSOLE=y
# CONFIG_EFI_DEV_PATH_PARSER is not set

#
# Tegra firmware driver
#

#
# File systems
#
CONFIG_DCACHE_WORD_ACCESS=y
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y
# CONFIG_EXT2_FS_SECURITY is not set
CONFIG_EXT3_FS=y
# CONFIG_EXT3_FS_POSIX_ACL is not set
CONFIG_EXT3_FS_SECURITY=y
CONFIG_EXT4_FS=y
CONFIG_EXT4_FS_POSIX_ACL=y
CONFIG_EXT4_FS_SECURITY=y
# CONFIG_EXT4_ENCRYPTION is not set
# CONFIG_EXT4_DEBUG is not set
CONFIG_JBD2=y
# CONFIG_JBD2_DEBUG is not set
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
CONFIG_JFS_FS=y
# CONFIG_JFS_POSIX_ACL is not set
# CONFIG_JFS_SECURITY is not set
# CONFIG_JFS_DEBUG is not set
CONFIG_JFS_STATISTICS=y
# CONFIG_XFS_FS is not set
CONFIG_GFS2_FS=y
# CONFIG_OCFS2_FS is not set
CONFIG_BTRFS_FS=y
CONFIG_BTRFS_FS_POSIX_ACL=y
# CONFIG_BTRFS_FS_CHECK_INTEGRITY is not set
# CONFIG_BTRFS_FS_RUN_SANITY_TESTS is not set
CONFIG_BTRFS_DEBUG=y
# CONFIG_BTRFS_ASSERT is not set
# CONFIG_NILFS2_FS is not set
# CONFIG_F2FS_FS is not set
# CONFIG_FS_DAX is not set
CONFIG_FS_POSIX_ACL=y
CONFIG_EXPORTFS=y
# CONFIG_EXPORTFS_BLOCK_OPS is not set
CONFIG_FILE_LOCKING=y
CONFIG_MANDATORY_FILE_LOCKING=y
# CONFIG_FS_ENCRYPTION is not set
CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_INOTIFY_USER=y
CONFIG_FANOTIFY=y
# CONFIG_QUOTA is not set
# CONFIG_QUOTA_NETLINK_INTERFACE is not set
CONFIG_QUOTACTL=y
CONFIG_AUTOFS4_FS=y
CONFIG_FUSE_FS=y
CONFIG_CUSE=y
# CONFIG_OVERLAY_FS is not set

#
# Caches
#
# CONFIG_FSCACHE is not set

#
# CD-ROM/DVD Filesystems
#
# CONFIG_ISO9660_FS is not set
# CONFIG_UDF_FS is not set

#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
CONFIG_FAT_DEFAULT_UTF8=y
CONFIG_NTFS_FS=y
CONFIG_NTFS_DEBUG=y
# CONFIG_NTFS_RW is not set

#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
# CONFIG_PROC_KCORE is not set
CONFIG_PROC_SYSCTL=y
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_PROC_CHILDREN=y
CONFIG_KERNFS=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_TMPFS_XATTR is not set
# CONFIG_HUGETLBFS is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_CONFIGFS_FS=y
CONFIG_MISC_FILESYSTEMS=y
CONFIG_ORANGEFS_FS=y
CONFIG_ADFS_FS=y
CONFIG_ADFS_FS_RW=y
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
CONFIG_BFS_FS=y
CONFIG_EFS_FS=y
CONFIG_CRAMFS=y
CONFIG_SQUASHFS=y
CONFIG_SQUASHFS_FILE_CACHE=y
# CONFIG_SQUASHFS_FILE_DIRECT is not set
# CONFIG_SQUASHFS_DECOMP_SINGLE is not set
# CONFIG_SQUASHFS_DECOMP_MULTI is not set
CONFIG_SQUASHFS_DECOMP_MULTI_PERCPU=y
CONFIG_SQUASHFS_XATTR=y
CONFIG_SQUASHFS_ZLIB=y
CONFIG_SQUASHFS_LZ4=y
CONFIG_SQUASHFS_LZO=y
# CONFIG_SQUASHFS_XZ is not set
# CONFIG_SQUASHFS_4K_DEVBLK_SIZE is not set
# CONFIG_SQUASHFS_EMBEDDED is not set
CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
CONFIG_VXFS_FS=y
CONFIG_MINIX_FS=y
CONFIG_OMFS_FS=y
CONFIG_HPFS_FS=y
CONFIG_QNX4FS_FS=y
CONFIG_QNX6FS_FS=y
CONFIG_QNX6FS_DEBUG=y
CONFIG_ROMFS_FS=y
CONFIG_ROMFS_BACKED_BY_BLOCK=y
CONFIG_ROMFS_ON_BLOCK=y
CONFIG_PSTORE=y
# CONFIG_PSTORE_ZLIB_COMPRESS is not set
CONFIG_PSTORE_LZO_COMPRESS=y
# CONFIG_PSTORE_LZ4_COMPRESS is not set
CONFIG_PSTORE_CONSOLE=y
# CONFIG_PSTORE_PMSG is not set
# CONFIG_PSTORE_RAM is not set
CONFIG_SYSV_FS=y
# CONFIG_UFS_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
# CONFIG_NLS_CODEPAGE_437 is not set
# CONFIG_NLS_CODEPAGE_737 is not set
CONFIG_NLS_CODEPAGE_775=y
# CONFIG_NLS_CODEPAGE_850 is not set
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
CONFIG_NLS_CODEPAGE_857=y
# CONFIG_NLS_CODEPAGE_860 is not set
CONFIG_NLS_CODEPAGE_861=y
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
CONFIG_NLS_CODEPAGE_865=y
CONFIG_NLS_CODEPAGE_866=y
CONFIG_NLS_CODEPAGE_869=y
CONFIG_NLS_CODEPAGE_936=y
CONFIG_NLS_CODEPAGE_950=y
CONFIG_NLS_CODEPAGE_932=y
# CONFIG_NLS_CODEPAGE_949 is not set
CONFIG_NLS_CODEPAGE_874=y
CONFIG_NLS_ISO8859_8=y
CONFIG_NLS_CODEPAGE_1250=y
CONFIG_NLS_CODEPAGE_1251=y
CONFIG_NLS_ASCII=y
# CONFIG_NLS_ISO8859_1 is not set
# CONFIG_NLS_ISO8859_2 is not set
CONFIG_NLS_ISO8859_3=y
CONFIG_NLS_ISO8859_4=y
# CONFIG_NLS_ISO8859_5 is not set
CONFIG_NLS_ISO8859_6=y
# CONFIG_NLS_ISO8859_7 is not set
CONFIG_NLS_ISO8859_9=y
CONFIG_NLS_ISO8859_13=y
# CONFIG_NLS_ISO8859_14 is not set
CONFIG_NLS_ISO8859_15=y
CONFIG_NLS_KOI8_R=y
# CONFIG_NLS_KOI8_U is not set
# CONFIG_NLS_MAC_ROMAN is not set
# CONFIG_NLS_MAC_CELTIC is not set
# CONFIG_NLS_MAC_CENTEURO is not set
CONFIG_NLS_MAC_CROATIAN=y
# CONFIG_NLS_MAC_CYRILLIC is not set
CONFIG_NLS_MAC_GAELIC=y
# CONFIG_NLS_MAC_GREEK is not set
# CONFIG_NLS_MAC_ICELAND is not set
CONFIG_NLS_MAC_INUIT=y
CONFIG_NLS_MAC_ROMANIAN=y
# CONFIG_NLS_MAC_TURKISH is not set
CONFIG_NLS_UTF8=y

#
# Kernel hacking
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=y

#
# printk and dmesg options
#
CONFIG_PRINTK_TIME=y
CONFIG_CONSOLE_LOGLEVEL_DEFAULT=7
CONFIG_MESSAGE_LOGLEVEL_DEFAULT=4
# CONFIG_BOOT_PRINTK_DELAY is not set
CONFIG_DYNAMIC_DEBUG=y

#
# Compile-time checks and compiler options
#
# CONFIG_DEBUG_INFO is not set
# CONFIG_ENABLE_WARN_DEPRECATED is not set
# CONFIG_ENABLE_MUST_CHECK is not set
CONFIG_FRAME_WARN=1024
# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_READABLE_ASM is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_PAGE_OWNER is not set
CONFIG_DEBUG_FS=y
CONFIG_HEADERS_CHECK=y
CONFIG_DEBUG_SECTION_MISMATCH=y
CONFIG_SECTION_MISMATCH_WARN_ONLY=y
CONFIG_ARCH_WANT_FRAME_POINTERS=y
CONFIG_FRAME_POINTER=y
# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
CONFIG_MAGIC_SYSRQ=y
CONFIG_MAGIC_SYSRQ_DEFAULT_ENABLE=0x1
CONFIG_MAGIC_SYSRQ_SERIAL=y
CONFIG_DEBUG_KERNEL=y

#
# Memory Debugging
#
CONFIG_PAGE_EXTENSION=y
# CONFIG_DEBUG_PAGEALLOC is not set
# CONFIG_PAGE_POISONING is not set
# CONFIG_DEBUG_PAGE_REF is not set
# CONFIG_DEBUG_RODATA_TEST is not set
CONFIG_DEBUG_OBJECTS=y
CONFIG_DEBUG_OBJECTS_SELFTEST=y
CONFIG_DEBUG_OBJECTS_FREE=y
# CONFIG_DEBUG_OBJECTS_TIMERS is not set
# CONFIG_DEBUG_OBJECTS_WORK is not set
# CONFIG_DEBUG_OBJECTS_RCU_HEAD is not set
CONFIG_DEBUG_OBJECTS_PERCPU_COUNTER=y
CONFIG_DEBUG_OBJECTS_ENABLE_DEFAULT=1
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
CONFIG_HAVE_DEBUG_KMEMLEAK=y
# CONFIG_DEBUG_KMEMLEAK is not set
# CONFIG_DEBUG_STACK_USAGE is not set
CONFIG_DEBUG_VM=y
CONFIG_DEBUG_VM_VMACACHE=y
# CONFIG_DEBUG_VM_RB is not set
CONFIG_DEBUG_VM_PGFLAGS=y
CONFIG_ARCH_HAS_DEBUG_VIRTUAL=y
# CONFIG_DEBUG_VIRTUAL is not set
# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_DEBUG_PER_CPU_MAPS is not set
CONFIG_HAVE_DEBUG_STACKOVERFLOW=y
# CONFIG_DEBUG_STACKOVERFLOW is not set
CONFIG_HAVE_ARCH_KMEMCHECK=y
# CONFIG_KMEMCHECK is not set
# CONFIG_DEBUG_SHIRQ is not set

#
# Debug Lockups and Hangs
#
# CONFIG_LOCKUP_DETECTOR is not set
CONFIG_DETECT_HUNG_TASK=y
CONFIG_DEFAULT_HUNG_TASK_TIMEOUT=120
# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
# CONFIG_WQ_WATCHDOG is not set
CONFIG_PANIC_ON_OOPS=y
CONFIG_PANIC_ON_OOPS_VALUE=1
CONFIG_PANIC_TIMEOUT=0
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHED_INFO is not set
# CONFIG_SCHEDSTATS is not set
# CONFIG_SCHED_STACK_END_CHECK is not set
# CONFIG_DEBUG_TIMEKEEPING is not set
# CONFIG_DEBUG_PREEMPT is not set

#
# Lock Debugging (spinlocks, mutexes, etc...)
#
CONFIG_DEBUG_RT_MUTEXES=y
CONFIG_DEBUG_SPINLOCK=y
CONFIG_DEBUG_MUTEXES=y
# CONFIG_DEBUG_WW_MUTEX_SLOWPATH is not set
CONFIG_DEBUG_LOCK_ALLOC=y
CONFIG_PROVE_LOCKING=y
CONFIG_LOCKDEP=y
CONFIG_LOCK_STAT=y
# CONFIG_DEBUG_LOCKDEP is not set
CONFIG_DEBUG_ATOMIC_SLEEP=y
CONFIG_DEBUG_LOCKING_API_SELFTESTS=y
CONFIG_LOCK_TORTURE_TEST=y
CONFIG_WW_MUTEX_SELFTEST=y
CONFIG_TRACE_IRQFLAGS=y
CONFIG_STACKTRACE=y
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_BUGVERBOSE=y
CONFIG_DEBUG_LIST=y
# CONFIG_DEBUG_PI_LIST is not set
CONFIG_DEBUG_SG=y
# CONFIG_DEBUG_NOTIFIERS is not set
# CONFIG_DEBUG_CREDENTIALS is not set

#
# RCU Debugging
#
CONFIG_PROVE_RCU=y
CONFIG_PROVE_RCU_REPEATEDLY=y
# CONFIG_SPARSE_RCU_POINTER is not set
CONFIG_TORTURE_TEST=y
CONFIG_RCU_PERF_TEST=y
# CONFIG_RCU_TORTURE_TEST is not set
CONFIG_RCU_CPU_STALL_TIMEOUT=21
# CONFIG_RCU_TRACE is not set
# CONFIG_RCU_EQS_DEBUG is not set
CONFIG_DEBUG_WQ_FORCE_RR_CPU=y
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
CONFIG_NOTIFIER_ERROR_INJECTION=y
CONFIG_OF_RECONFIG_NOTIFIER_ERROR_INJECT=y
# CONFIG_NETDEV_NOTIFIER_ERROR_INJECT is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
CONFIG_USER_STACKTRACE_SUPPORT=y
CONFIG_NOP_TRACER=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_DYNAMIC_FTRACE_WITH_REGS=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_HAVE_C_RECORDMCOUNT=y
CONFIG_TRACER_MAX_TRACE=y
CONFIG_TRACE_CLOCK=y
CONFIG_RING_BUFFER=y
CONFIG_EVENT_TRACING=y
CONFIG_CONTEXT_SWITCH_TRACER=y
CONFIG_RING_BUFFER_ALLOW_SWAP=y
CONFIG_TRACING=y
CONFIG_GENERIC_TRACER=y
CONFIG_TRACING_SUPPORT=y
CONFIG_FTRACE=y
# CONFIG_FUNCTION_TRACER is not set
CONFIG_IRQSOFF_TRACER=y
# CONFIG_PREEMPT_TRACER is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_HWLAT_TRACER is not set
CONFIG_FTRACE_SYSCALLS=y
CONFIG_TRACER_SNAPSHOT=y
CONFIG_TRACER_SNAPSHOT_PER_CPU_SWAP=y
CONFIG_BRANCH_PROFILE_NONE=y
# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
# CONFIG_PROFILE_ALL_BRANCHES is not set
# CONFIG_STACK_TRACER is not set
CONFIG_BLK_DEV_IO_TRACE=y
# CONFIG_UPROBE_EVENTS is not set
# CONFIG_PROBE_EVENTS is not set
# CONFIG_FTRACE_STARTUP_TEST is not set
# CONFIG_MMIOTRACE is not set
CONFIG_TRACING_MAP=y
CONFIG_HIST_TRIGGERS=y
CONFIG_TRACEPOINT_BENCHMARK=y
CONFIG_RING_BUFFER_BENCHMARK=y
# CONFIG_RING_BUFFER_STARTUP_TEST is not set
# CONFIG_TRACE_ENUM_MAP_FILE is not set
CONFIG_TRACING_EVENTS_GPIO=y

#
# Runtime Testing
#
CONFIG_LKDTM=y
CONFIG_TEST_LIST_SORT=y
CONFIG_TEST_SORT=y
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_RBTREE_TEST is not set
CONFIG_ATOMIC64_SELFTEST=y
# CONFIG_TEST_HEXDUMP is not set
CONFIG_TEST_STRING_HELPERS=y
CONFIG_TEST_KSTRTOX=y
CONFIG_TEST_PRINTF=y
CONFIG_TEST_BITMAP=y
CONFIG_TEST_UUID=y
CONFIG_TEST_RHASHTABLE=y
CONFIG_TEST_HASH=y
# CONFIG_PROVIDE_OHCI1394_DMA_INIT is not set
# CONFIG_DMA_API_DEBUG is not set
# CONFIG_TEST_FIRMWARE is not set
CONFIG_TEST_UDELAY=y
# CONFIG_MEMTEST is not set
CONFIG_BUG_ON_DATA_CORRUPTION=y
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
CONFIG_ARCH_HAS_UBSAN_SANITIZE_ALL=y
# CONFIG_ARCH_WANTS_UBSAN_NO_NULL is not set
CONFIG_UBSAN=y
# CONFIG_UBSAN_SANITIZE_ALL is not set
# CONFIG_UBSAN_ALIGNMENT is not set
CONFIG_UBSAN_NULL=y
CONFIG_ARCH_HAS_DEVMEM_IS_ALLOWED=y
CONFIG_X86_VERBOSE_BOOTUP=y
# CONFIG_EARLY_PRINTK is not set
CONFIG_X86_PTDUMP_CORE=y
CONFIG_X86_PTDUMP=y
CONFIG_DEBUG_WX=y
# CONFIG_DOUBLEFAULT is not set
# CONFIG_DEBUG_TLBFLUSH is not set
CONFIG_IOMMU_STRESS=y
CONFIG_HAVE_MMIOTRACE_SUPPORT=y
CONFIG_IO_DELAY_TYPE_0X80=0
CONFIG_IO_DELAY_TYPE_0XED=1
CONFIG_IO_DELAY_TYPE_UDELAY=2
CONFIG_IO_DELAY_TYPE_NONE=3
# CONFIG_IO_DELAY_0X80 is not set
# CONFIG_IO_DELAY_0XED is not set
CONFIG_IO_DELAY_UDELAY=y
# CONFIG_IO_DELAY_NONE is not set
CONFIG_DEFAULT_IO_DELAY_TYPE=2
CONFIG_DEBUG_BOOT_PARAMS=y
# CONFIG_CPA_DEBUG is not set
CONFIG_OPTIMIZE_INLINING=y
# CONFIG_DEBUG_ENTRY is not set
CONFIG_DEBUG_NMI_SELFTEST=y
# CONFIG_X86_DEBUG_FPU is not set
CONFIG_PUNIT_ATOM_DEBUG=y

#
# Security options
#
# CONFIG_KEYS is not set
CONFIG_SECURITY_DMESG_RESTRICT=y
# CONFIG_SECURITY is not set
CONFIG_SECURITYFS=y
CONFIG_HAVE_HARDENED_USERCOPY_ALLOCATOR=y
CONFIG_HAVE_ARCH_HARDENED_USERCOPY=y
# CONFIG_HARDENED_USERCOPY is not set
CONFIG_STATIC_USERMODEHELPER=y
CONFIG_STATIC_USERMODEHELPER_PATH="/sbin/usermode-helper"
CONFIG_DEFAULT_SECURITY_DAC=y
CONFIG_DEFAULT_SECURITY=""
CONFIG_XOR_BLOCKS=y
CONFIG_CRYPTO=y

#
# Crypto core or helper
#
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD=y
CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_BLKCIPHER=y
CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG=y
CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_RNG_DEFAULT=y
CONFIG_CRYPTO_AKCIPHER2=y
CONFIG_CRYPTO_AKCIPHER=y
CONFIG_CRYPTO_KPP2=y
CONFIG_CRYPTO_KPP=y
CONFIG_CRYPTO_ACOMP2=y
CONFIG_CRYPTO_RSA=y
CONFIG_CRYPTO_DH=y
CONFIG_CRYPTO_ECDH=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_USER is not set
CONFIG_CRYPTO_MANAGER_DISABLE_TESTS=y
CONFIG_CRYPTO_GF128MUL=y
CONFIG_CRYPTO_NULL=y
CONFIG_CRYPTO_NULL2=y
CONFIG_CRYPTO_PCRYPT=y
CONFIG_CRYPTO_WORKQUEUE=y
CONFIG_CRYPTO_CRYPTD=y
# CONFIG_CRYPTO_MCRYPTD is not set
CONFIG_CRYPTO_AUTHENC=y
CONFIG_CRYPTO_ABLK_HELPER=y
CONFIG_CRYPTO_SIMD=y
CONFIG_CRYPTO_GLUE_HELPER_X86=y

#
# Authenticated Encryption with Associated Data
#
CONFIG_CRYPTO_CCM=y
# CONFIG_CRYPTO_GCM is not set
# CONFIG_CRYPTO_CHACHA20POLY1305 is not set
CONFIG_CRYPTO_SEQIV=y
# CONFIG_CRYPTO_ECHAINIV is not set

#
# Block modes
#
CONFIG_CRYPTO_CBC=y
CONFIG_CRYPTO_CTR=y
# CONFIG_CRYPTO_CTS is not set
CONFIG_CRYPTO_ECB=y
CONFIG_CRYPTO_LRW=y
CONFIG_CRYPTO_PCBC=y
CONFIG_CRYPTO_XTS=y
CONFIG_CRYPTO_KEYWRAP=y

#
# Hash modes
#
CONFIG_CRYPTO_CMAC=y
CONFIG_CRYPTO_HMAC=y
# CONFIG_CRYPTO_XCBC is not set
CONFIG_CRYPTO_VMAC=y

#
# Digest
#
CONFIG_CRYPTO_CRC32C=y
CONFIG_CRYPTO_CRC32C_INTEL=y
CONFIG_CRYPTO_CRC32=y
CONFIG_CRYPTO_CRC32_PCLMUL=y
CONFIG_CRYPTO_CRCT10DIF=y
CONFIG_CRYPTO_GHASH=y
# CONFIG_CRYPTO_POLY1305 is not set
CONFIG_CRYPTO_MD4=y
# CONFIG_CRYPTO_MD5 is not set
# CONFIG_CRYPTO_MICHAEL_MIC is not set
CONFIG_CRYPTO_RMD128=y
CONFIG_CRYPTO_RMD160=y
# CONFIG_CRYPTO_RMD256 is not set
# CONFIG_CRYPTO_RMD320 is not set
# CONFIG_CRYPTO_SHA1 is not set
CONFIG_CRYPTO_SHA256=y
CONFIG_CRYPTO_SHA512=y
# CONFIG_CRYPTO_SHA3 is not set
CONFIG_CRYPTO_TGR192=y
# CONFIG_CRYPTO_WP512 is not set

#
# Ciphers
#
CONFIG_CRYPTO_AES=y
CONFIG_CRYPTO_AES_TI=y
CONFIG_CRYPTO_AES_586=y
CONFIG_CRYPTO_AES_NI_INTEL=y
CONFIG_CRYPTO_ANUBIS=y
# CONFIG_CRYPTO_ARC4 is not set
# CONFIG_CRYPTO_BLOWFISH is not set
# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
CONFIG_CRYPTO_DES=y
# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_KHAZAD is not set
CONFIG_CRYPTO_SALSA20=y
CONFIG_CRYPTO_SALSA20_586=y
CONFIG_CRYPTO_CHACHA20=y
CONFIG_CRYPTO_SEED=y
CONFIG_CRYPTO_SERPENT=y
CONFIG_CRYPTO_SERPENT_SSE2_586=y
CONFIG_CRYPTO_TEA=y
# CONFIG_CRYPTO_TWOFISH is not set
# CONFIG_CRYPTO_TWOFISH_586 is not set

#
# Compression
#
CONFIG_CRYPTO_DEFLATE=y
# CONFIG_CRYPTO_LZO is not set
CONFIG_CRYPTO_842=y
CONFIG_CRYPTO_LZ4=y
CONFIG_CRYPTO_LZ4HC=y

#
# Random Number Generation
#
CONFIG_CRYPTO_ANSI_CPRNG=y
CONFIG_CRYPTO_DRBG_MENU=y
CONFIG_CRYPTO_DRBG_HMAC=y
CONFIG_CRYPTO_DRBG_HASH=y
# CONFIG_CRYPTO_DRBG_CTR is not set
CONFIG_CRYPTO_DRBG=y
CONFIG_CRYPTO_JITTERENTROPY=y
# CONFIG_CRYPTO_USER_API_HASH is not set
# CONFIG_CRYPTO_USER_API_SKCIPHER is not set
# CONFIG_CRYPTO_USER_API_RNG is not set
# CONFIG_CRYPTO_USER_API_AEAD is not set
# CONFIG_CRYPTO_HW is not set

#
# Certificates for signature checking
#
CONFIG_HAVE_KVM=y
CONFIG_VIRTUALIZATION=y
# CONFIG_VHOST_NET is not set
CONFIG_VHOST_CROSS_ENDIAN_LEGACY=y
# CONFIG_LGUEST is not set
CONFIG_BINARY_PRINTF=y

#
# Library routines
#
CONFIG_RAID6_PQ=y
CONFIG_BITREVERSE=y
# CONFIG_HAVE_ARCH_BITREVERSE is not set
CONFIG_RATIONAL=y
CONFIG_GENERIC_STRNCPY_FROM_USER=y
CONFIG_GENERIC_STRNLEN_USER=y
CONFIG_GENERIC_NET_UTILS=y
CONFIG_GENERIC_FIND_FIRST_BIT=y
CONFIG_GENERIC_PCI_IOMAP=y
CONFIG_GENERIC_IOMAP=y
CONFIG_GENERIC_IO=y
CONFIG_ARCH_HAS_FAST_MULTIPLIER=y
CONFIG_CRC_CCITT=y
CONFIG_CRC16=y
CONFIG_CRC_T10DIF=y
CONFIG_CRC_ITU_T=y
CONFIG_CRC32=y
CONFIG_CRC32_SELFTEST=y
# CONFIG_CRC32_SLICEBY8 is not set
CONFIG_CRC32_SLICEBY4=y
# CONFIG_CRC32_SARWATE is not set
# CONFIG_CRC32_BIT is not set
CONFIG_CRC7=y
# CONFIG_LIBCRC32C is not set
CONFIG_CRC8=y
# CONFIG_AUDIT_ARCH_COMPAT_GENERIC is not set
CONFIG_RANDOM32_SELFTEST=y
CONFIG_842_COMPRESS=y
CONFIG_842_DECOMPRESS=y
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
CONFIG_LZO_COMPRESS=y
CONFIG_LZO_DECOMPRESS=y
CONFIG_LZ4_COMPRESS=y
CONFIG_LZ4HC_COMPRESS=y
CONFIG_LZ4_DECOMPRESS=y
CONFIG_XZ_DEC=y
CONFIG_XZ_DEC_X86=y
# CONFIG_XZ_DEC_POWERPC is not set
# CONFIG_XZ_DEC_IA64 is not set
CONFIG_XZ_DEC_ARM=y
# CONFIG_XZ_DEC_ARMTHUMB is not set
# CONFIG_XZ_DEC_SPARC is not set
CONFIG_XZ_DEC_BCJ=y
# CONFIG_XZ_DEC_TEST is not set
CONFIG_DECOMPRESS_GZIP=y
CONFIG_DECOMPRESS_BZIP2=y
CONFIG_DECOMPRESS_LZMA=y
CONFIG_DECOMPRESS_XZ=y
CONFIG_DECOMPRESS_LZO=y
CONFIG_DECOMPRESS_LZ4=y
CONFIG_GENERIC_ALLOCATOR=y
CONFIG_RADIX_TREE_MULTIORDER=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT_MAP=y
CONFIG_HAS_DMA=y
# CONFIG_DMA_NOOP_OPS is not set
# CONFIG_DMA_VIRT_OPS is not set
CONFIG_CHECK_SIGNATURE=y
CONFIG_CPU_RMAP=y
CONFIG_DQL=y
CONFIG_GLOB=y
# CONFIG_GLOB_SELFTEST is not set
CONFIG_NLATTR=y
CONFIG_CLZ_TAB=y
# CONFIG_CORDIC is not set
# CONFIG_DDR is not set
CONFIG_IRQ_POLL=y
CONFIG_MPILIB=y
# CONFIG_SG_SPLIT is not set
CONFIG_SG_POOL=y
CONFIG_ARCH_HAS_SG_CHAIN=y
CONFIG_ARCH_HAS_MMIO_FLUSH=y
CONFIG_SBITMAP=y

[-- Attachment #3: job-script.ksh --]
[-- Type: text/plain, Size: 3949 bytes --]

#!/bin/sh

export_top_env()
{
	export suite='boot'
	export testcase='boot'
	export timeout='10m'
	export job_origin='/lkp/lkp/src/jobs/boot.yaml'
	export queue='bisect'
	export testbox='vm-lkp-st01-openwrt-ia32-1'
	export tbox_group='vm-lkp-st01-openwrt-ia32'
	export branch='linux-devel/devel-spot-201704180508'
	export commit='ab1218235c09d0fabdea31cbd4f099e7cabccb27'
	export kconfig='i386-randconfig-b0-04180616'
	export submit_id='58fbc7660b9a931a18d348d3'
	export job_file='/lkp/scheduled/vm-lkp-st01-openwrt-ia32-1/boot-1-openwrt-i386-2016-03-16.cgz-ab1218235c09d0fabdea31cbd4f099e7cabccb27-20170423-6680-3gpgeq-0.yaml'
	export id='4165586ac34006549a1215b935fb3a697143bddd'
	export model='qemu-system-x86_64 -enable-kvm'
	export nr_vm=16
	export nr_cpu=1
	export memory='420M'
	export rootfs='openwrt-i386-2016-03-16.cgz'
	export need_kconfig='CONFIG_KVM_GUEST=y'
	export compiler='gcc-5'
	export enqueue_time='2017-04-23 05:13:11 +0800'
	export _id='58fbc7660b9a931a18d348d3'
	export user='lkp'
	export result_root='/result/boot/1/vm-lkp-st01-openwrt-ia32/openwrt-i386-2016-03-16.cgz/i386-randconfig-b0-04180616/gcc-5/ab1218235c09d0fabdea31cbd4f099e7cabccb27/0'
	export LKP_SERVER='inn'
	export max_uptime=600
	export initrd='/osimage/openwrt/openwrt-i386-2016-03-16.cgz'
	export bootloader_append='root=/dev/ram0
user=lkp
job=/lkp/scheduled/vm-lkp-st01-openwrt-ia32-1/boot-1-openwrt-i386-2016-03-16.cgz-ab1218235c09d0fabdea31cbd4f099e7cabccb27-20170423-6680-3gpgeq-0.yaml
ARCH=i386
kconfig=i386-randconfig-b0-04180616
branch=linux-devel/devel-spot-201704180508
commit=ab1218235c09d0fabdea31cbd4f099e7cabccb27
BOOT_IMAGE=/pkg/linux/i386-randconfig-b0-04180616/gcc-5/ab1218235c09d0fabdea31cbd4f099e7cabccb27/vmlinuz-4.11.0-rc2-00217-gab12182
max_uptime=600
RESULT_ROOT=/result/boot/1/vm-lkp-st01-openwrt-ia32/openwrt-i386-2016-03-16.cgz/i386-randconfig-b0-04180616/gcc-5/ab1218235c09d0fabdea31cbd4f099e7cabccb27/0
LKP_SERVER=inn
debug
apic=debug
sysrq_always_enabled
rcupdate.rcu_cpu_stall_timeout=100
net.ifnames=0
printk.devkmsg=on
panic=-1
softlockup_panic=1
nmi_watchdog=panic
oops=panic
load_ramdisk=2
prompt_ramdisk=0
drbd.minor_count=8
systemd.log_level=err
ignore_loglevel
earlyprintk=ttyS0,115200
console=ttyS0,115200
console=tty0
vga=normal
rw'
	export lkp_initrd='/lkp/lkp/lkp-i386.cgz'
	export site='inn'
	export LKP_CGI_PORT=80
	export LKP_CIFS_PORT=139
	export _rt='/result/boot/1/vm-lkp-st01-openwrt-ia32/openwrt-i386-2016-03-16.cgz/i386-randconfig-b0-04180616/gcc-5/ab1218235c09d0fabdea31cbd4f099e7cabccb27'
	export kernel='/pkg/linux/i386-randconfig-b0-04180616/gcc-5/ab1218235c09d0fabdea31cbd4f099e7cabccb27/vmlinuz-4.11.0-rc2-00217-gab12182'
	export dequeue_time='2017-04-23 05:21:13 +0800'
	export job_initrd='/lkp/scheduled/vm-lkp-st01-openwrt-ia32-1/boot-1-openwrt-i386-2016-03-16.cgz-ab1218235c09d0fabdea31cbd4f099e7cabccb27-20170423-6680-3gpgeq-0.cgz'

	[ -n "$LKP_SRC" ] ||
	export LKP_SRC=/lkp/${user:-lkp}/src
}

run_job()
{
	echo $$ > $TMP/run-job.pid

	. $LKP_SRC/lib/http.sh
	. $LKP_SRC/lib/job.sh
	. $LKP_SRC/lib/env.sh

	export_top_env

	run_monitor $LKP_SRC/monitors/one-shot/wrapper boot-slabinfo
	run_monitor $LKP_SRC/monitors/one-shot/wrapper boot-meminfo
	run_monitor $LKP_SRC/monitors/one-shot/wrapper memmap
	run_monitor $LKP_SRC/monitors/wrapper kmsg
	run_monitor $LKP_SRC/monitors/wrapper oom-killer
	run_monitor $LKP_SRC/monitors/plain/watchdog
	run_monitor $LKP_SRC/monitors/wrapper nfs-hang

	run_test $LKP_SRC/tests/wrapper sleep 1
}

extract_stats()
{
	$LKP_SRC/stats/wrapper boot-slabinfo
	$LKP_SRC/stats/wrapper boot-meminfo
	$LKP_SRC/stats/wrapper memmap
	$LKP_SRC/stats/wrapper boot-memory
	$LKP_SRC/stats/wrapper boot-time
	$LKP_SRC/stats/wrapper kernel-size
	$LKP_SRC/stats/wrapper kmsg

	$LKP_SRC/stats/wrapper time sleep.time
	$LKP_SRC/stats/wrapper time
	$LKP_SRC/stats/wrapper dmesg
	$LKP_SRC/stats/wrapper kmsg
	$LKP_SRC/stats/wrapper stderr
	$LKP_SRC/stats/wrapper last_state
}

"$@"

[-- Attachment #4: dmesg.xz --]
[-- Type: application/octet-stream, Size: 11392 bytes --]

Re: [PATCH v3 3/4] sd: Make synchronize cache upon shutdown asynchronous

[Bart Van Assche]

On Sun, 2017-04-23 at 12:28 -0500, James Bottomley wrote:
> --- a/drivers/scsi/scsi_lib.c
> +++ b/drivers/scsi/scsi_lib.c
> @@ -1250,6 +1250,12 @@ scsi_prep_state_check(struct scsi_device *sdev, struct request *req)
>  			break;
>  		case SDEV_BLOCK:
>  		case SDEV_CREATED_BLOCK:
> +			/* q lock is held only in the non-mq case */
> +			if (req->q->mq_ops)
> +				blk_mq_stop_hw_queues(req->q);
> +			else
> +				blk_stop_queue(req->q);
> +
>  			ret = BLKPREP_DEFER;
>  			break;
>  		case SDEV_QUIESCE:

Hello James,

This change swaps the order of changing the device state and the block layer
state. Sorry but I don't like this. What will happen if e.g. the disk event
checker decides to check for events just before __scsi_remove_device()
changes the device state? I think that can that cause sd_shutdown() to be
called with the block layer queue stopped and hence that with this approach
it is still possible that sd_shutdown() hangs.

> @@ -2611,7 +2617,6 @@ scsi_device_set_state(struct scsi_device *sdev, enum scsi_device_state state)
>  		case SDEV_QUIESCE:
>  		case SDEV_OFFLINE:
>  		case SDEV_TRANSPORT_OFFLINE:
> -		case SDEV_BLOCK:
>  			break;
>  		default:
>  			goto illegal;

A previous patch made two changes to scsi_device_set_state(). Are you sure
that we do no longer have to enable the SDEV_BLOCK to SDEV_DEL transition?

> @@ -2844,10 +2849,12 @@ static int scsi_request_fn_active(struct scsi_device *sdev)
>   */
>  static void scsi_wait_for_queuecommand(struct scsi_device *sdev)
>  {
> -	WARN_ON_ONCE(sdev->host->use_blk_mq);
> -
> -	while (scsi_request_fn_active(sdev))
> -		msleep(20);
> +	if (sdev->request_queue->mq_ops) {
> +		synchronize_rcu();
> +	} else {
> +		while (scsi_request_fn_active(sdev))
> +			msleep(20);
> +	}
>  }

The above code makes an assumption about the block layer internals, namely
that calling synchronize_rcu() is sufficient to wait for outstanding requests
to finish. Please do not embed any assumptions about block layer internals in
SCSI code but keep code that relies on block layer internals in the block
layer. If you have a look at blk_mq_quiesce_queue() then you will see that
calling synchronize_rcu() is not sufficient for hardware queues for which
BLK_MQ_F_BLOCKING has been set. I am aware that today the SCSI core does not
set that flag. However, the dependency of the dependency of the
synchronize_rcu() call on BLK_MQ_F_BLOCKING not being set is nontrivial.

Thanks,

Bart.

Re: [PATCH v3 3/4] sd: Make synchronize cache upon shutdown asynchronous

[Bart Van Assche]

[-- Attachment #1: Type: text/plain, Size: 2155 bytes --]

On Tue, 2017-04-18 at 08:56 -0700, James Bottomley wrote:
> The priority has got to be the removal we've been ordered to do rather
> than waiting around to see if the transport comes back so we can send a
> final flush.
> 
> How about this approach.  It goes straight to DEL if the device is
> blocked (skipping CANCEL).  This means that all the commands issued in 
> ->shutdown will error in the mid-layer, thus making the removal proceed
> without being stopped.
> 
> James
> 
> ---
> 
> diff --git a/drivers/scsi/scsi_lib.c b/drivers/scsi/scsi_lib.c
> index e5a2d590a104..31171204cfd1 100644
> --- a/drivers/scsi/scsi_lib.c
> +++ b/drivers/scsi/scsi_lib.c
> @@ -2611,7 +2611,6 @@ scsi_device_set_state(struct scsi_device *sdev, enum scsi_device_state state)
>  		case SDEV_QUIESCE:
>  		case SDEV_OFFLINE:
>  		case SDEV_TRANSPORT_OFFLINE:
> -		case SDEV_BLOCK:
>  			break;
>  		default:
>  			goto illegal;
> @@ -2625,6 +2624,7 @@ scsi_device_set_state(struct scsi_device *sdev, enum scsi_device_state state)
>  		case SDEV_OFFLINE:
>  		case SDEV_TRANSPORT_OFFLINE:
>  		case SDEV_CANCEL:
> +		case SDEV_BLOCK:
>  		case SDEV_CREATED_BLOCK:
>  			break;
>  		default:
> diff --git a/drivers/scsi/scsi_sysfs.c b/drivers/scsi/scsi_sysfs.c
> index 82dfe07b1d47..788309e307e9 100644
> --- a/drivers/scsi/scsi_sysfs.c
> +++ b/drivers/scsi/scsi_sysfs.c
> @@ -1282,8 +1282,14 @@ void __scsi_remove_device(struct scsi_device *sdev)
>  		return;
>  
>  	if (sdev->is_visible) {
> +		/*
> +		 * If blocked, we go straight to DEL so any commands
> +		 * issued during the driver shutdown (like sync cache)
> +		 * are errored
> +		 */
>  		if (scsi_device_set_state(sdev, SDEV_CANCEL) != 0)
> -			return;
> +			if (scsi_device_set_state(sdev, SDEV_DEL) != 0)
> +				return;
>  
>  		bsg_unregister_queue(sdev->request_queue);
>  		device_unregister(&sdev->sdev_dev);
> 
> 

Hello James,

How about modifying the above patch by adding a mutex to avoid that the transition
to SDEV_DEL and blocking the request queue happen in the wrong order, e.g. as in
the attached three patches?

Thanks,

Bart.

[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #2: 0001-Introduce-scsi_start_queue.patch --]
[-- Type: text/x-patch; name="0001-Introduce-scsi_start_queue.patch", Size: 2756 bytes --]

From c395ce2aaf6d8a644311f4c55dfa6aa560a93240 Mon Sep 17 00:00:00 2001
From: Bart Van Assche <bart.vanassche@sandisk.com>
Date: Tue, 28 Mar 2017 14:00:17 -0700
Subject: [PATCH 1/3] Introduce scsi_start_queue()

This patch does not change any functionality.

Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com>
Cc: Israel Rukshin <israelr@mellanox.com>
Cc: Max Gurtovoy <maxg@mellanox.com>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Benjamin Block <bblock@linux.vnet.ibm.com>
---
 drivers/scsi/scsi_lib.c  | 25 +++++++++++++++----------
 drivers/scsi/scsi_priv.h |  1 +
 2 files changed, 16 insertions(+), 10 deletions(-)

diff --git a/drivers/scsi/scsi_lib.c b/drivers/scsi/scsi_lib.c
index eecc005099b2..ffa6e61299a9 100644
--- a/drivers/scsi/scsi_lib.c
+++ b/drivers/scsi/scsi_lib.c
@@ -2987,6 +2987,20 @@ scsi_internal_device_block(struct scsi_device *sdev, bool wait)
 }
 EXPORT_SYMBOL_GPL(scsi_internal_device_block);
  
+void scsi_start_queue(struct scsi_device *sdev)
+{
+	struct request_queue *q = sdev->request_queue;
+	unsigned long flags;
+
+	if (q->mq_ops) {
+		blk_mq_start_stopped_hw_queues(q, false);
+	} else {
+		spin_lock_irqsave(q->queue_lock, flags);
+		blk_start_queue(q);
+		spin_unlock_irqrestore(q->queue_lock, flags);
+	}
+}
+
 /**
  * scsi_internal_device_unblock - resume a device after a block request
  * @sdev:	device to resume
@@ -3007,9 +3021,6 @@ int
 scsi_internal_device_unblock(struct scsi_device *sdev,
 			     enum scsi_device_state new_state)
 {
-	struct request_queue *q = sdev->request_queue; 
-	unsigned long flags;
-
 	/*
 	 * Try to transition the scsi device to SDEV_RUNNING or one of the
 	 * offlined states and goose the device queue if successful.
@@ -3027,13 +3038,7 @@ scsi_internal_device_unblock(struct scsi_device *sdev,
 		 sdev->sdev_state != SDEV_OFFLINE)
 		return -EINVAL;
 
-	if (q->mq_ops) {
-		blk_mq_start_stopped_hw_queues(q, false);
-	} else {
-		spin_lock_irqsave(q->queue_lock, flags);
-		blk_start_queue(q);
-		spin_unlock_irqrestore(q->queue_lock, flags);
-	}
+	scsi_start_queue(sdev);
 
 	return 0;
 }
diff --git a/drivers/scsi/scsi_priv.h b/drivers/scsi/scsi_priv.h
index f11bd102d6d5..c7629e31a75b 100644
--- a/drivers/scsi/scsi_priv.h
+++ b/drivers/scsi/scsi_priv.h
@@ -89,6 +89,7 @@ extern void scsi_run_host_queues(struct Scsi_Host *shost);
 extern void scsi_requeue_run_queue(struct work_struct *work);
 extern struct request_queue *scsi_alloc_queue(struct scsi_device *sdev);
 extern struct request_queue *scsi_mq_alloc_queue(struct scsi_device *sdev);
+extern void scsi_start_queue(struct scsi_device *sdev);
 extern int scsi_mq_setup_tags(struct Scsi_Host *shost);
 extern void scsi_mq_destroy_tags(struct Scsi_Host *shost);
 extern int scsi_init_queue(void);
-- 
2.12.2


[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #3: 0002-Protect-SCSI-device-state-changes-with-a-mutex.patch --]
[-- Type: text/x-patch; name="0002-Protect-SCSI-device-state-changes-with-a-mutex.patch", Size: 6756 bytes --]

From f1a34dcc19fd624eca9fd98c36a74555f4746ff8 Mon Sep 17 00:00:00 2001
From: Bart Van Assche <bart.vanassche@sandisk.com>
Date: Wed, 26 Apr 2017 09:24:08 -0700
Subject: [PATCH 2/3] Protect SCSI device state changes with a mutex

Enable this mechanism for all scsi_target_*block() callers but not
for the scsi_internal_device_unblock() calls from the mpt3sas driver
because that driver can call scsi_internal_device_unblock() from
atomic context.

Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com>
---
 drivers/scsi/mpt3sas/mpt3sas_scsih.c |  4 ++--
 drivers/scsi/scsi_lib.c              | 35 +++++++++++++++++++++++++++--------
 drivers/scsi/scsi_scan.c             |  1 +
 drivers/scsi/scsi_sysfs.c            | 11 ++++++++++-
 include/scsi/scsi_device.h           |  3 ++-
 5 files changed, 42 insertions(+), 12 deletions(-)

diff --git a/drivers/scsi/mpt3sas/mpt3sas_scsih.c b/drivers/scsi/mpt3sas/mpt3sas_scsih.c
index 919ba2bb15f1..0edf5e7cd0ab 100644
--- a/drivers/scsi/mpt3sas/mpt3sas_scsih.c
+++ b/drivers/scsi/mpt3sas/mpt3sas_scsih.c
@@ -2883,7 +2883,7 @@ _scsih_internal_device_unblock(struct scsi_device *sdev,
 	sdev_printk(KERN_WARNING, sdev, "device_unblock and setting to running, "
 	    "handle(0x%04x)\n", sas_device_priv_data->sas_target->handle);
 	sas_device_priv_data->block = 0;
-	r = scsi_internal_device_unblock(sdev, SDEV_RUNNING);
+	r = scsi_internal_device_unblock(sdev, SDEV_RUNNING, false);
 	if (r == -EINVAL) {
 		/* The device has been set to SDEV_RUNNING by SD layer during
 		 * device addition but the request queue is still stopped by
@@ -2902,7 +2902,7 @@ _scsih_internal_device_unblock(struct scsi_device *sdev,
 			    r, sas_device_priv_data->sas_target->handle);
 
 		sas_device_priv_data->block = 0;
-		r = scsi_internal_device_unblock(sdev, SDEV_RUNNING);
+		r = scsi_internal_device_unblock(sdev, SDEV_RUNNING, false);
 		if (r)
 			sdev_printk(KERN_WARNING, sdev, "retried device_unblock"
 			    " failed with return(%d) for handle(0x%04x)\n",
diff --git a/drivers/scsi/scsi_lib.c b/drivers/scsi/scsi_lib.c
index ffa6e61299a9..6ab7c63110b1 100644
--- a/drivers/scsi/scsi_lib.c
+++ b/drivers/scsi/scsi_lib.c
@@ -2955,14 +2955,16 @@ scsi_internal_device_block(struct scsi_device *sdev, bool wait)
 {
 	struct request_queue *q = sdev->request_queue;
 	unsigned long flags;
-	int err = 0;
+	int err;
+
+	if (wait)
+		mutex_lock(&sdev->state_mutex);
 
 	err = scsi_device_set_state(sdev, SDEV_BLOCK);
 	if (err) {
 		err = scsi_device_set_state(sdev, SDEV_CREATED_BLOCK);
-
 		if (err)
-			return err;
+			goto unlock;
 	}
 
 	/* 
@@ -2983,7 +2985,11 @@ scsi_internal_device_block(struct scsi_device *sdev, bool wait)
 			scsi_wait_for_queuecommand(sdev);
 	}
 
-	return 0;
+unlock:
+	if (wait)
+		mutex_unlock(&sdev->state_mutex);
+
+	return err;
 }
 EXPORT_SYMBOL_GPL(scsi_internal_device_block);
  
@@ -3005,6 +3011,8 @@ void scsi_start_queue(struct scsi_device *sdev)
  * scsi_internal_device_unblock - resume a device after a block request
  * @sdev:	device to resume
  * @new_state:	state to set devices to after unblocking
+ * @wait:	whether or not to wait until concurrent state changes have
+ *		finished
  *
  * Called by scsi lld's or the midlayer to restart the device queue
  * for the previously suspended scsi device.  Called from interrupt or
@@ -3019,8 +3027,13 @@ void scsi_start_queue(struct scsi_device *sdev)
  */
 int
 scsi_internal_device_unblock(struct scsi_device *sdev,
-			     enum scsi_device_state new_state)
+			     enum scsi_device_state new_state, bool wait)
 {
+	int ret = -EINVAL;
+
+	if (wait)
+		mutex_lock(&sdev->state_mutex);
+
 	/*
 	 * Try to transition the scsi device to SDEV_RUNNING or one of the
 	 * offlined states and goose the device queue if successful.
@@ -3036,11 +3049,16 @@ scsi_internal_device_unblock(struct scsi_device *sdev,
 			sdev->sdev_state = SDEV_CREATED;
 	} else if (sdev->sdev_state != SDEV_CANCEL &&
 		 sdev->sdev_state != SDEV_OFFLINE)
-		return -EINVAL;
+		goto unlock;
 
+	ret = 0;
 	scsi_start_queue(sdev);
 
-	return 0;
+unlock:
+	if (wait)
+		mutex_unlock(&sdev->state_mutex);
+
+	return ret;
 }
 EXPORT_SYMBOL_GPL(scsi_internal_device_unblock);
 
@@ -3073,7 +3091,8 @@ EXPORT_SYMBOL_GPL(scsi_target_block);
 static void
 device_unblock(struct scsi_device *sdev, void *data)
 {
-	scsi_internal_device_unblock(sdev, *(enum scsi_device_state *)data);
+	scsi_internal_device_unblock(sdev, *(enum scsi_device_state *)data,
+				     true);
 }
 
 static int
diff --git a/drivers/scsi/scsi_scan.c b/drivers/scsi/scsi_scan.c
index 6f7128f49c30..6f4be6e2777d 100644
--- a/drivers/scsi/scsi_scan.c
+++ b/drivers/scsi/scsi_scan.c
@@ -231,6 +231,7 @@ static struct scsi_device *scsi_alloc_sdev(struct scsi_target *starget,
 	sdev->id = starget->id;
 	sdev->lun = lun;
 	sdev->channel = starget->channel;
+	mutex_init(&sdev->state_mutex);
 	sdev->sdev_state = SDEV_CREATED;
 	INIT_LIST_HEAD(&sdev->siblings);
 	INIT_LIST_HEAD(&sdev->same_target_siblings);
diff --git a/drivers/scsi/scsi_sysfs.c b/drivers/scsi/scsi_sysfs.c
index 82dfe07b1d47..5892cd95c546 100644
--- a/drivers/scsi/scsi_sysfs.c
+++ b/drivers/scsi/scsi_sysfs.c
@@ -1272,6 +1272,7 @@ int scsi_sysfs_add_sdev(struct scsi_device *sdev)
 void __scsi_remove_device(struct scsi_device *sdev)
 {
 	struct device *dev = &sdev->sdev_gendev;
+	int res;
 
 	/*
 	 * This cleanup path is not reentrant and while it is impossible
@@ -1282,7 +1283,15 @@ void __scsi_remove_device(struct scsi_device *sdev)
 		return;
 
 	if (sdev->is_visible) {
-		if (scsi_device_set_state(sdev, SDEV_CANCEL) != 0)
+		/*
+		 * Wait until a concurrent scsi_internal_target_block() call
+		 * has finished before changing the device state.
+		 */
+		mutex_lock(&sdev->state_mutex);
+		res = scsi_device_set_state(sdev, SDEV_CANCEL);
+		mutex_unlock(&sdev->state_mutex);
+
+		if (res != 0)
 			return;
 
 		bsg_unregister_queue(sdev->request_queue);
diff --git a/include/scsi/scsi_device.h b/include/scsi/scsi_device.h
index 080c7ce9bae8..25b649033615 100644
--- a/include/scsi/scsi_device.h
+++ b/include/scsi/scsi_device.h
@@ -207,6 +207,7 @@ struct scsi_device {
 	void			*handler_data;
 
 	unsigned char		access_state;
+	struct mutex		state_mutex;
 	enum scsi_device_state sdev_state;
 	unsigned long		sdev_data[0];
 } __attribute__((aligned(sizeof(unsigned long))));
@@ -474,7 +475,7 @@ static inline int scsi_device_created(struct scsi_device *sdev)
 
 int scsi_internal_device_block(struct scsi_device *sdev, bool wait);
 int scsi_internal_device_unblock(struct scsi_device *sdev,
-				 enum scsi_device_state new_state);
+				 enum scsi_device_state new_state, bool wait);
 
 /* accessor functions for the SCSI parameters */
 static inline int scsi_device_sync(struct scsi_device *sdev)
-- 
2.12.2


[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #4: 0003-Make-__scsi_remove_device-go-straight-from-BLOCKED-t.patch --]
[-- Type: text/x-patch; name="0003-Make-__scsi_remove_device-go-straight-from-BLOCKED-t.patch", Size: 2460 bytes --]

From f558b519922837eec5410de7aed059cb42c10b64 Mon Sep 17 00:00:00 2001
From: Bart Van Assche <bart.vanassche@sandisk.com>
Date: Tue, 18 Apr 2017 10:11:02 -0700
Subject: [PATCH 3/3] Make __scsi_remove_device go straight from BLOCKED to DEL

If a device is blocked, make __scsi_remove_device() cause it to
transition to the DEL state. This means that all the commands
issued in .shutdown() will error in the mid-layer, thus making
the removal proceed without being stopped.

This patch is a slightly modified version of a patch from James
Bottomley.

Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Cc: Israel Rukshin <israelr@mellanox.com>
Cc: Max Gurtovoy <maxg@mellanox.com>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Benjamin Block <bblock@linux.vnet.ibm.com>
---
 drivers/scsi/scsi_lib.c   |  2 +-
 drivers/scsi/scsi_sysfs.c | 13 +++++++++++++
 2 files changed, 14 insertions(+), 1 deletion(-)

diff --git a/drivers/scsi/scsi_lib.c b/drivers/scsi/scsi_lib.c
index 6ab7c63110b1..2e84bb85d0e6 100644
--- a/drivers/scsi/scsi_lib.c
+++ b/drivers/scsi/scsi_lib.c
@@ -2611,7 +2611,6 @@ scsi_device_set_state(struct scsi_device *sdev, enum scsi_device_state state)
 		case SDEV_QUIESCE:
 		case SDEV_OFFLINE:
 		case SDEV_TRANSPORT_OFFLINE:
-		case SDEV_BLOCK:
 			break;
 		default:
 			goto illegal;
@@ -2625,6 +2624,7 @@ scsi_device_set_state(struct scsi_device *sdev, enum scsi_device_state state)
 		case SDEV_OFFLINE:
 		case SDEV_TRANSPORT_OFFLINE:
 		case SDEV_CANCEL:
+		case SDEV_BLOCK:
 		case SDEV_CREATED_BLOCK:
 			break;
 		default:
diff --git a/drivers/scsi/scsi_sysfs.c b/drivers/scsi/scsi_sysfs.c
index 5892cd95c546..8b9b6aaf6a9e 100644
--- a/drivers/scsi/scsi_sysfs.c
+++ b/drivers/scsi/scsi_sysfs.c
@@ -1288,7 +1288,20 @@ void __scsi_remove_device(struct scsi_device *sdev)
 		 * has finished before changing the device state.
 		 */
 		mutex_lock(&sdev->state_mutex);
+		/*
+		 * If blocked, we go straight to DEL and restart the queue so
+		 * any commands issued during driver shutdown (like sync
+		 * cache) are errored immediately.
+		 */
 		res = scsi_device_set_state(sdev, SDEV_CANCEL);
+		if (res != 0) {
+			res = scsi_device_set_state(sdev, SDEV_DEL);
+			if (res == 0) {
+				scsi_start_queue(sdev);
+				sdev_printk(KERN_DEBUG, sdev,
+				    "Changed state from BLOCKED to DEL\n");
+			}
+		}
 		mutex_unlock(&sdev->state_mutex);
 
 		if (res != 0)
-- 
2.12.2

Re: [PATCH v3 3/4] sd: Make synchronize cache upon shutdown asynchronous

[James Bottomley]

On Wed, 2017-04-26 at 18:53 +0000, Bart Van Assche wrote:
> On Tue, 2017-04-18 at 08:56 -0700, James Bottomley wrote:
> > The priority has got to be the removal we've been ordered to do
> > rather
> > than waiting around to see if the transport comes back so we can
> > send a
> > final flush.
> > 
> > How about this approach.  It goes straight to DEL if the device is
> > blocked (skipping CANCEL).  This means that all the commands issued
> > in 
> > ->shutdown will error in the mid-layer, thus making the removal
> > proceed
> > without being stopped.
> > 
> > James
> > 
> > ---
> > 
> > diff --git a/drivers/scsi/scsi_lib.c b/drivers/scsi/scsi_lib.c
> > index e5a2d590a104..31171204cfd1 100644
> > --- a/drivers/scsi/scsi_lib.c
> > +++ b/drivers/scsi/scsi_lib.c
> > @@ -2611,7 +2611,6 @@ scsi_device_set_state(struct scsi_device
> > *sdev, enum scsi_device_state state)
> >  		case SDEV_QUIESCE:
> >  		case SDEV_OFFLINE:
> >  		case SDEV_TRANSPORT_OFFLINE:
> > -		case SDEV_BLOCK:
> >  			break;
> >  		default:
> >  			goto illegal;
> > @@ -2625,6 +2624,7 @@ scsi_device_set_state(struct scsi_device
> > *sdev, enum scsi_device_state state)
> >  		case SDEV_OFFLINE:
> >  		case SDEV_TRANSPORT_OFFLINE:
> >  		case SDEV_CANCEL:
> > +		case SDEV_BLOCK:
> >  		case SDEV_CREATED_BLOCK:
> >  			break;
> >  		default:
> > diff --git a/drivers/scsi/scsi_sysfs.c b/drivers/scsi/scsi_sysfs.c
> > index 82dfe07b1d47..788309e307e9 100644
> > --- a/drivers/scsi/scsi_sysfs.c
> > +++ b/drivers/scsi/scsi_sysfs.c
> > @@ -1282,8 +1282,14 @@ void __scsi_remove_device(struct scsi_device
> > *sdev)
> >  		return;
> >  
> >  	if (sdev->is_visible) {
> > +		/*
> > +		 * If blocked, we go straight to DEL so any
> > commands
> > +		 * issued during the driver shutdown (like sync
> > cache)
> > +		 * are errored
> > +		 */
> >  		if (scsi_device_set_state(sdev, SDEV_CANCEL) != 0)
> > -			return;
> > +			if (scsi_device_set_state(sdev, SDEV_DEL)
> > != 0)
> > +				return;
> >  
> >  		bsg_unregister_queue(sdev->request_queue);
> >  		device_unregister(&sdev->sdev_dev);
> > 
> > 
> 
> Hello James,
> 
> How about modifying the above patch by adding a mutex to avoid that 
> the transition to SDEV_DEL and blocking the request queue happen in 
> the wrong order, e.g. as in the attached three patches?

If you've hammered it with your usual testing and it survived, I think
that's enough to prove its a concurrency problem we have to solve, so
the critical section introduction looks good.  The only refinement I
think I'd ask for is rather than creating an entirely new mutex, what
about using the host->scan_mutex?  It simplifies your code in
__scsi_remove_device because the scan mutex is already held on entry.

I'm also not very happy with a conditional mutex: that's usually
something we try to avoid.   I'd prefer an underscore version of
scsi_internal_device_block that doesn't take the mutex and which
mpt3sas uses (and make the non underscore version take the mutex and
call the underscore version).

Thanks,

James