All of lore.kernel.org
 help / color / mirror / Atom feed
From: Jon Mason <jon.mason@broadcom.com>
To: Florian Fainelli <florian.fainelli@broadcom.com>,
	Zhang Rui <rui.zhang@intel.com>,
	Eduardo Valentin <edubezval@gmail.com>,
	Rob Herring <robh+dt@kernel.org>,
	Mark Rutland <mark.rutland@arm.com>
Cc: bcm-kernel-feedback-list@broadcom.com,
	linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org, linux-pm@vger.kernel.org,
	devicetree@vger.kernel.org
Subject: [PATCH 1/2] thermal: broadcom: Allow for NSP to use ns-thermal driver
Date: Tue, 25 Apr 2017 16:49:10 -0400	[thread overview]
Message-ID: <1493153351-12698-2-git-send-email-jon.mason@broadcom.com> (raw)
In-Reply-To: <1493153351-12698-1-git-send-email-jon.mason@broadcom.com>

Change the iProc Kconfig to select THERMAL and THERMAL_OF, which allows
the ns-thermal driver to be selected via menuconfig.  Also, change the
ns-thermal driver to work on any iProc based SoC.  Finally, tweak the
Kconfig description to mention support for NSP and make the default on
for iProc based platforms.

Signed-off-by: Jon Mason <jon.mason@broadcom.com>
---
 arch/arm/mach-bcm/Kconfig        | 2 ++
 drivers/thermal/broadcom/Kconfig | 9 +++++----
 2 files changed, 7 insertions(+), 4 deletions(-)

diff --git a/arch/arm/mach-bcm/Kconfig b/arch/arm/mach-bcm/Kconfig
index a0e66d8..da2bfeb 100644
--- a/arch/arm/mach-bcm/Kconfig
+++ b/arch/arm/mach-bcm/Kconfig
@@ -19,6 +19,8 @@ config ARCH_BCM_IPROC
 	select GPIOLIB
 	select ARM_AMBA
 	select PINCTRL
+	select THERMAL
+	select THERMAL_OF
 	help
 	  This enables support for systems based on Broadcom IPROC architected SoCs.
 	  The IPROC complex contains one or more ARM CPUs along with common
diff --git a/drivers/thermal/broadcom/Kconfig b/drivers/thermal/broadcom/Kconfig
index f0dea8a..26d706c 100644
--- a/drivers/thermal/broadcom/Kconfig
+++ b/drivers/thermal/broadcom/Kconfig
@@ -1,8 +1,9 @@
 config BCM_NS_THERMAL
 	tristate "Northstar thermal driver"
 	depends on ARCH_BCM_IPROC || COMPILE_TEST
+	default ARCH_BCM_IPROC
 	help
-	  Northstar is a family of SoCs that includes e.g. BCM4708, BCM47081,
-	  BCM4709 and BCM47094. It contains DMU (Device Management Unit) block
-	  with a thermal sensor that allows checking CPU temperature. This
-	  driver provides support for it.
+	  Support for the Northstar and Northstar Plus family of SoCs (e.g.
+	  BCM4708, BCM4709, BCM5301x, BCM95852X, etc). It contains DMU (Device
+	  Management Unit) block with a thermal sensor that allows checking CPU
+	  temperature.
-- 
2.7.4

WARNING: multiple messages have this Message-ID (diff)
From: Jon Mason <jon.mason-dY08KVG/lbpWk0Htik3J/w@public.gmane.org>
To: Florian Fainelli
	<florian.fainelli-dY08KVG/lbpWk0Htik3J/w@public.gmane.org>,
	Zhang Rui <rui.zhang-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>,
	Eduardo Valentin
	<edubezval-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>,
	Rob Herring <robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>,
	Mark Rutland <mark.rutland-5wv7dgnIgG8@public.gmane.org>
Cc: bcm-kernel-feedback-list-dY08KVG/lbpWk0Htik3J/w@public.gmane.org,
	linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
	linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	linux-pm-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Subject: [PATCH 1/2] thermal: broadcom: Allow for NSP to use ns-thermal driver
Date: Tue, 25 Apr 2017 16:49:10 -0400	[thread overview]
Message-ID: <1493153351-12698-2-git-send-email-jon.mason@broadcom.com> (raw)
In-Reply-To: <1493153351-12698-1-git-send-email-jon.mason-dY08KVG/lbpWk0Htik3J/w@public.gmane.org>

Change the iProc Kconfig to select THERMAL and THERMAL_OF, which allows
the ns-thermal driver to be selected via menuconfig.  Also, change the
ns-thermal driver to work on any iProc based SoC.  Finally, tweak the
Kconfig description to mention support for NSP and make the default on
for iProc based platforms.

Signed-off-by: Jon Mason <jon.mason-dY08KVG/lbpWk0Htik3J/w@public.gmane.org>
---
 arch/arm/mach-bcm/Kconfig        | 2 ++
 drivers/thermal/broadcom/Kconfig | 9 +++++----
 2 files changed, 7 insertions(+), 4 deletions(-)

diff --git a/arch/arm/mach-bcm/Kconfig b/arch/arm/mach-bcm/Kconfig
index a0e66d8..da2bfeb 100644
--- a/arch/arm/mach-bcm/Kconfig
+++ b/arch/arm/mach-bcm/Kconfig
@@ -19,6 +19,8 @@ config ARCH_BCM_IPROC
 	select GPIOLIB
 	select ARM_AMBA
 	select PINCTRL
+	select THERMAL
+	select THERMAL_OF
 	help
 	  This enables support for systems based on Broadcom IPROC architected SoCs.
 	  The IPROC complex contains one or more ARM CPUs along with common
diff --git a/drivers/thermal/broadcom/Kconfig b/drivers/thermal/broadcom/Kconfig
index f0dea8a..26d706c 100644
--- a/drivers/thermal/broadcom/Kconfig
+++ b/drivers/thermal/broadcom/Kconfig
@@ -1,8 +1,9 @@
 config BCM_NS_THERMAL
 	tristate "Northstar thermal driver"
 	depends on ARCH_BCM_IPROC || COMPILE_TEST
+	default ARCH_BCM_IPROC
 	help
-	  Northstar is a family of SoCs that includes e.g. BCM4708, BCM47081,
-	  BCM4709 and BCM47094. It contains DMU (Device Management Unit) block
-	  with a thermal sensor that allows checking CPU temperature. This
-	  driver provides support for it.
+	  Support for the Northstar and Northstar Plus family of SoCs (e.g.
+	  BCM4708, BCM4709, BCM5301x, BCM95852X, etc). It contains DMU (Device
+	  Management Unit) block with a thermal sensor that allows checking CPU
+	  temperature.
-- 
2.7.4

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

WARNING: multiple messages have this Message-ID (diff)
From: jon.mason@broadcom.com (Jon Mason)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 1/2] thermal: broadcom: Allow for NSP to use ns-thermal driver
Date: Tue, 25 Apr 2017 16:49:10 -0400	[thread overview]
Message-ID: <1493153351-12698-2-git-send-email-jon.mason@broadcom.com> (raw)
In-Reply-To: <1493153351-12698-1-git-send-email-jon.mason@broadcom.com>

Change the iProc Kconfig to select THERMAL and THERMAL_OF, which allows
the ns-thermal driver to be selected via menuconfig.  Also, change the
ns-thermal driver to work on any iProc based SoC.  Finally, tweak the
Kconfig description to mention support for NSP and make the default on
for iProc based platforms.

Signed-off-by: Jon Mason <jon.mason@broadcom.com>
---
 arch/arm/mach-bcm/Kconfig        | 2 ++
 drivers/thermal/broadcom/Kconfig | 9 +++++----
 2 files changed, 7 insertions(+), 4 deletions(-)

diff --git a/arch/arm/mach-bcm/Kconfig b/arch/arm/mach-bcm/Kconfig
index a0e66d8..da2bfeb 100644
--- a/arch/arm/mach-bcm/Kconfig
+++ b/arch/arm/mach-bcm/Kconfig
@@ -19,6 +19,8 @@ config ARCH_BCM_IPROC
 	select GPIOLIB
 	select ARM_AMBA
 	select PINCTRL
+	select THERMAL
+	select THERMAL_OF
 	help
 	  This enables support for systems based on Broadcom IPROC architected SoCs.
 	  The IPROC complex contains one or more ARM CPUs along with common
diff --git a/drivers/thermal/broadcom/Kconfig b/drivers/thermal/broadcom/Kconfig
index f0dea8a..26d706c 100644
--- a/drivers/thermal/broadcom/Kconfig
+++ b/drivers/thermal/broadcom/Kconfig
@@ -1,8 +1,9 @@
 config BCM_NS_THERMAL
 	tristate "Northstar thermal driver"
 	depends on ARCH_BCM_IPROC || COMPILE_TEST
+	default ARCH_BCM_IPROC
 	help
-	  Northstar is a family of SoCs that includes e.g. BCM4708, BCM47081,
-	  BCM4709 and BCM47094. It contains DMU (Device Management Unit) block
-	  with a thermal sensor that allows checking CPU temperature. This
-	  driver provides support for it.
+	  Support for the Northstar and Northstar Plus family of SoCs (e.g.
+	  BCM4708, BCM4709, BCM5301x, BCM95852X, etc). It contains DMU (Device
+	  Management Unit) block with a thermal sensor that allows checking CPU
+	  temperature.
-- 
2.7.4

  reply	other threads:[~2017-04-25 20:50 UTC|newest]

Thread overview: 22+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-04-25 20:49 [PATCH 0/2] thermal: broadcom: Add NSP Thermal Support Jon Mason
2017-04-25 20:49 ` Jon Mason
2017-04-25 20:49 ` Jon Mason [this message]
2017-04-25 20:49   ` [PATCH 1/2] thermal: broadcom: Allow for NSP to use ns-thermal driver Jon Mason
2017-04-25 20:49   ` Jon Mason
2017-04-27 16:37   ` Eduardo Valentin
2017-04-27 16:37     ` Eduardo Valentin
2017-04-27 16:37     ` Eduardo Valentin
2017-04-27 17:42     ` Jon Mason
2017-04-27 17:42       ` Jon Mason
2017-04-27 17:42       ` Jon Mason
2017-04-28 13:07       ` Eduardo Valentin
2017-04-28 13:07         ` Eduardo Valentin
2017-04-28 13:07         ` Eduardo Valentin
2017-04-28 18:04         ` Jon Mason
2017-04-28 18:04           ` Jon Mason
2017-04-28 18:04           ` Jon Mason
2017-04-25 20:49 ` [PATCH 2/2] ARM: dts: NSP: Add Thermal Support Jon Mason
2017-04-25 20:49   ` Jon Mason
2017-04-27 16:38   ` Eduardo Valentin
2017-04-27 16:38     ` Eduardo Valentin
2017-04-27 16:38     ` Eduardo Valentin

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1493153351-12698-2-git-send-email-jon.mason@broadcom.com \
    --to=jon.mason@broadcom.com \
    --cc=bcm-kernel-feedback-list@broadcom.com \
    --cc=devicetree@vger.kernel.org \
    --cc=edubezval@gmail.com \
    --cc=florian.fainelli@broadcom.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pm@vger.kernel.org \
    --cc=mark.rutland@arm.com \
    --cc=robh+dt@kernel.org \
    --cc=rui.zhang@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.