All of lore.kernel.org
 help / color / mirror / Atom feed
From: Dou Liyang <douly.fnst@cn.fujitsu.com>
To: <x86@kernel.org>, <linux-kernel@vger.kernel.org>
Cc: <tglx@linutronix.de>, <mingo@kernel.org>, <hpa@zytor.com>,
	<ebiederm@xmission.com>, <bhe@redhat.com>,
	<izumi.taku@jp.fujitsu.com>,
	Dou Liyang <douly.fnst@cn.fujitsu.com>
Subject: [RFC PATCH v4 10/12] x86/apic: Make the interrupt mode setup earlier for UP system
Date: Thu, 11 May 2017 18:57:37 +0800	[thread overview]
Message-ID: <1494500257-31920-1-git-send-email-douly.fnst@cn.fujitsu.com> (raw)
In-Reply-To: <1494423889-25799-11-git-send-email-douly.fnst@cn.fujitsu.com>

In UniProcessor kernel with UP_LATE_INIT=y, enable and setup the
interrupt delivery mode in smp_init() which almost be called at the
end of start_kernel().

But, system should not make sure the timer IRQs work well for
calibrating delay in dump-capture kernel.

Due to the MP table or ACPI has been read earlier, setup the interrupt
mode as soon as possible, and make the system run in the final mode to
avoid the compatibility issues.

Core patch for UP kernel and remove the original setup code.

Signed-off-by: Dou Liyang <douly.fnst@cn.fujitsu.com>
---
V3 --> V4:
  - Setup upmode earlier for UP system.
  - Check interrupt mode before per cpu clock event setup.

 arch/x86/include/asm/apic.h |  1 -
 arch/x86/kernel/apic/apic.c | 49 ++++++++-------------------------------------
 2 files changed, 8 insertions(+), 42 deletions(-)

diff --git a/arch/x86/include/asm/apic.h b/arch/x86/include/asm/apic.h
index 13f46e3..78a0c74 100644
--- a/arch/x86/include/asm/apic.h
+++ b/arch/x86/include/asm/apic.h
@@ -135,7 +135,6 @@ void register_lapic_address(unsigned long address);
 extern void setup_boot_APIC_clock(void);
 extern void setup_secondary_APIC_clock(void);
 extern void lapic_update_tsc_freq(void);
-extern int APIC_init_uniprocessor(void);
 
 #ifdef CONFIG_X86_64
 static inline int apic_force_enable(unsigned long addr)
diff --git a/arch/x86/kernel/apic/apic.c b/arch/x86/kernel/apic/apic.c
index b09650d..304b050 100644
--- a/arch/x86/kernel/apic/apic.c
+++ b/arch/x86/kernel/apic/apic.c
@@ -1205,6 +1205,10 @@ static int __init apic_interrupt_mode_select(int *upmode)
 	}
 #endif
 
+#ifdef CONFIG_UP_LATE_INIT
+	*upmode = true;
+#endif
+
 	/* Check MP table or ACPI MADT configuration */
 	if (!smp_found_config) {
 		disable_ioapic_support();
@@ -2382,51 +2386,14 @@ void __init apic_bsp_setup(bool upmode)
 	setup_IO_APIC();
 }
 
-/*
- * This initializes the IO-APIC and APIC hardware if this is
- * a UP kernel.
- */
-int __init APIC_init_uniprocessor(void)
+#ifdef CONFIG_UP_LATE_INIT
+void __init up_late_init(void)
 {
-	if (disable_apic) {
-		pr_info("Apic disabled\n");
-		return -1;
-	}
-#ifdef CONFIG_X86_64
-	if (!boot_cpu_has(X86_FEATURE_APIC)) {
-		disable_apic = 1;
-		pr_info("Apic disabled by BIOS\n");
-		return -1;
-	}
-#else
-	if (!smp_found_config && !boot_cpu_has(X86_FEATURE_APIC))
-		return -1;
-
-	/*
-	 * Complain if the BIOS pretends there is one.
-	 */
-	if (!boot_cpu_has(X86_FEATURE_APIC) &&
-	    APIC_INTEGRATED(boot_cpu_apic_version)) {
-		pr_err("BIOS bug, local APIC 0x%x not detected!...\n",
-			boot_cpu_physical_apicid);
-		return -1;
-	}
-#endif
-
-	if (!smp_found_config)
-		disable_ioapic_support();
+	if (apic_interrupt_mode == APIC_PIC)
+		return;
 
-	default_setup_apic_routing();
-	apic_bsp_setup(true);
 	/* Setup local timer */
 	x86_init.timers.setup_percpu_clockev();
-	return 0;
-}
-
-#ifdef CONFIG_UP_LATE_INIT
-void __init up_late_init(void)
-{
-	APIC_init_uniprocessor();
 }
 #endif
 
-- 
2.5.5

  reply	other threads:[~2017-05-11 10:57 UTC|newest]

Thread overview: 23+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-05-10 13:44 [RFC PATCH v3 00/12] Unify interrupt mode and setup it as soon as possible Dou Liyang
2017-05-10 13:44 ` [RFC PATCH v3 01/12] x86/apic: Replace init_bsp_APIC() with apic_virtual_wire_mode_setup() Dou Liyang
2017-05-10 13:44 ` [RFC PATCH v3 02/12] x86/apic: Construct a selector for the interrupt delivery mode Dou Liyang
2017-05-10 13:44 ` [RFC PATCH v3 03/12] x86/apic: Prepare for unifying the interrupt delivery modes setup Dou Liyang
2017-05-10 13:44 ` [RFC PATCH v3 04/12] x86/time: Initialize interrupt mode behind timer init Dou Liyang
2017-06-06  6:00   ` [RFC PATCH v4 " Dou Liyang
2017-05-10 13:44 ` [RFC PATCH v3 05/12] x86/ioapic: Refactor the delay logic in timer_irq_works() Dou Liyang
2017-05-26  8:10   ` [RFC PATCH v4 " Dou Liyang
2017-05-10 13:44 ` [RFC PATCH v3 06/12] x86/apic: Split local APIC timer setup from the APIC setup Dou Liyang
2017-05-10 13:44 ` [RFC PATCH v3 07/12] x86/apic: Move the logical APIC ID setup from apic_bsp_setup() Dou Liyang
2017-05-10 13:44 ` [RFC PATCH v3 08/12] x86/apic: Make interrupt mode setup earlier for SMP-capable system Dou Liyang
2017-05-10 13:44 ` [RFC PATCH v3 09/12] x86/apic: Setup interrupt mode earlier in case of no SMP motherboard Dou Liyang
2017-05-12  9:55   ` [RFC PATCH v4 " Dou Liyang
2017-05-10 13:44 ` [RFC PATCH v3 10/12] x86/apic: Make the interrupt mode setup earlier for UP system Dou Liyang
2017-05-11 10:57   ` Dou Liyang [this message]
2017-05-10 13:44 ` [RFC PATCH v3 11/12] x86/apic: Mark the apic_interrupt_mode extern for disable_smp() Dou Liyang
2017-05-10 13:44 ` [RFC PATCH v3 12/12] x86/apic: Remove the apic_virtual_wire_mode_setup() Dou Liyang
2017-05-22 20:23 ` [RFC PATCH v3 00/12] Unify interrupt mode and setup it as soon as possible Thomas Gleixner
2017-05-23  1:29   ` Dou Liyang
2017-06-06  6:50     ` Dou Liyang
2017-06-26 10:08   ` Dou Liyang
2017-06-26 11:50     ` Thomas Gleixner
2017-06-27  1:50       ` Dou Liyang

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1494500257-31920-1-git-send-email-douly.fnst@cn.fujitsu.com \
    --to=douly.fnst@cn.fujitsu.com \
    --cc=bhe@redhat.com \
    --cc=ebiederm@xmission.com \
    --cc=hpa@zytor.com \
    --cc=izumi.taku@jp.fujitsu.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mingo@kernel.org \
    --cc=tglx@linutronix.de \
    --cc=x86@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.