* [PATCH v5] mfd:rtsx: do retry when DMA transfer error
@ 2017-05-23 2:00 steven_feng
2017-05-23 6:59 ` Lee Jones
0 siblings, 1 reply; 2+ messages in thread
From: steven_feng @ 2017-05-23 2:00 UTC (permalink / raw)
To: lee.jones; +Cc: linux-kernel, Steven Feng
From: Steven Feng <steven_feng@realsil.com.cn>
The request should be resent when DMA transfer error occurred.
For rts5227, the clock rate needs to be reduced when error occurred.
Signed-off-by: Steven Feng <steven_feng@realsil.com.cn>
---
drivers/mfd/rtsx_pcr.c | 17 +++++++++++++++--
include/linux/mfd/rtsx_pci.h | 5 +++++
2 files changed, 20 insertions(+), 2 deletions(-)
diff --git a/drivers/mfd/rtsx_pcr.c b/drivers/mfd/rtsx_pcr.c
index 98029ee..ca2738c 100644
--- a/drivers/mfd/rtsx_pcr.c
+++ b/drivers/mfd/rtsx_pcr.c
@@ -30,6 +30,7 @@
#include <linux/platform_device.h>
#include <linux/mfd/core.h>
#include <linux/mfd/rtsx_pci.h>
+#include <linux/mmc/card.h>
#include <asm/unaligned.h>
#include "rtsx_pcr.h"
@@ -452,8 +453,12 @@ int rtsx_pci_dma_transfer(struct rtsx_pcr *pcr, struct scatterlist *sglist,
}
spin_lock_irqsave(&pcr->lock, flags);
- if (pcr->trans_result == TRANS_RESULT_FAIL)
- err = -EINVAL;
+ if (pcr->trans_result == TRANS_RESULT_FAIL) {
+ err = -EILSEQ;
+ if (pcr->dma_error_count < RTS_MAX_TIMES_FREQ_REDUCTION)
+ pcr->dma_error_count++;
+ }
+
else if (pcr->trans_result == TRANS_NO_DEVICE)
err = -ENODEV;
spin_unlock_irqrestore(&pcr->lock, flags);
@@ -659,6 +664,13 @@ int rtsx_pci_switch_clock(struct rtsx_pcr *pcr, unsigned int card_clock,
if (err < 0)
return err;
+ /*Reduce MMC card clock by 20MHz each time a DMA transfer error occurs*/
+ if (card_clock == UHS_SDR104_MAX_DTR &&
+ pcr->dma_error_count &&
+ PCI_PID(pcr) == RTS5227_DEVICE_ID)
+ card_clock = UHS_SDR104_MAX_DTR -
+ (pcr->dma_error_count * 20000000);
+
card_clock /= 1000000;
pcr_dbg(pcr, "Switch card clock to %dMHz\n", card_clock);
@@ -894,6 +906,7 @@ static irqreturn_t rtsx_pci_isr(int irq, void *dev_id)
pcr->card_removed |= SD_EXIST;
pcr->card_inserted &= ~SD_EXIST;
}
+ pcr->dma_error_count = 0;
}
if (int_reg & MS_INT) {
diff --git a/include/linux/mfd/rtsx_pci.h b/include/linux/mfd/rtsx_pci.h
index 7eb7cba..116816f 100644
--- a/include/linux/mfd/rtsx_pci.h
+++ b/include/linux/mfd/rtsx_pci.h
@@ -850,6 +850,9 @@
#define rtsx_pci_init_cmd(pcr) ((pcr)->ci = 0)
+#define RTS5227_DEVICE_ID 0x5227
+#define RTS_MAX_TIMES_FREQ_REDUCTION 8
+
struct rtsx_pcr;
struct pcr_handle {
@@ -957,6 +960,8 @@ struct rtsx_pcr {
int num_slots;
struct rtsx_slot *slots;
+
+ u8 dma_error_count;
};
#define CHK_PCI_PID(pcr, pid) ((pcr)->pci->device == (pid))
--
1.9.1
^ permalink raw reply related [flat|nested] 2+ messages in thread
* Re: [PATCH v5] mfd:rtsx: do retry when DMA transfer error
2017-05-23 2:00 [PATCH v5] mfd:rtsx: do retry when DMA transfer error steven_feng
@ 2017-05-23 6:59 ` Lee Jones
0 siblings, 0 replies; 2+ messages in thread
From: Lee Jones @ 2017-05-23 6:59 UTC (permalink / raw)
To: steven_feng; +Cc: linux-kernel
On Tue, 23 May 2017, steven_feng@realsil.com.cn wrote:
> From: Steven Feng <steven_feng@realsil.com.cn>
>
> The request should be resent when DMA transfer error occurred.
> For rts5227, the clock rate needs to be reduced when error occurred.
>
> Signed-off-by: Steven Feng <steven_feng@realsil.com.cn>
> ---
> drivers/mfd/rtsx_pcr.c | 17 +++++++++++++++--
> include/linux/mfd/rtsx_pci.h | 5 +++++
> 2 files changed, 20 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/mfd/rtsx_pcr.c b/drivers/mfd/rtsx_pcr.c
> index 98029ee..ca2738c 100644
> --- a/drivers/mfd/rtsx_pcr.c
> +++ b/drivers/mfd/rtsx_pcr.c
> @@ -30,6 +30,7 @@
> #include <linux/platform_device.h>
> #include <linux/mfd/core.h>
> #include <linux/mfd/rtsx_pci.h>
> +#include <linux/mmc/card.h>
> #include <asm/unaligned.h>
>
> #include "rtsx_pcr.h"
> @@ -452,8 +453,12 @@ int rtsx_pci_dma_transfer(struct rtsx_pcr *pcr, struct scatterlist *sglist,
> }
>
> spin_lock_irqsave(&pcr->lock, flags);
> - if (pcr->trans_result == TRANS_RESULT_FAIL)
> - err = -EINVAL;
> + if (pcr->trans_result == TRANS_RESULT_FAIL) {
> + err = -EILSEQ;
> + if (pcr->dma_error_count < RTS_MAX_TIMES_FREQ_REDUCTION)
> + pcr->dma_error_count++;
> + }
> +
> else if (pcr->trans_result == TRANS_NO_DEVICE)
> err = -ENODEV;
> spin_unlock_irqrestore(&pcr->lock, flags);
> @@ -659,6 +664,13 @@ int rtsx_pci_switch_clock(struct rtsx_pcr *pcr, unsigned int card_clock,
> if (err < 0)
> return err;
>
> + /*Reduce MMC card clock by 20MHz each time a DMA transfer error occurs*/
This is not acceptable either. There should be spaced either side of
the comment body, so "/* Something */".
> + if (card_clock == UHS_SDR104_MAX_DTR &&
> + pcr->dma_error_count &&
> + PCI_PID(pcr) == RTS5227_DEVICE_ID)
> + card_clock = UHS_SDR104_MAX_DTR -
> + (pcr->dma_error_count * 20000000);
> +
> card_clock /= 1000000;
> pcr_dbg(pcr, "Switch card clock to %dMHz\n", card_clock);
>
> @@ -894,6 +906,7 @@ static irqreturn_t rtsx_pci_isr(int irq, void *dev_id)
> pcr->card_removed |= SD_EXIST;
> pcr->card_inserted &= ~SD_EXIST;
> }
> + pcr->dma_error_count = 0;
> }
>
> if (int_reg & MS_INT) {
> diff --git a/include/linux/mfd/rtsx_pci.h b/include/linux/mfd/rtsx_pci.h
> index 7eb7cba..116816f 100644
> --- a/include/linux/mfd/rtsx_pci.h
> +++ b/include/linux/mfd/rtsx_pci.h
> @@ -850,6 +850,9 @@
>
> #define rtsx_pci_init_cmd(pcr) ((pcr)->ci = 0)
>
> +#define RTS5227_DEVICE_ID 0x5227
> +#define RTS_MAX_TIMES_FREQ_REDUCTION 8
> +
> struct rtsx_pcr;
>
> struct pcr_handle {
> @@ -957,6 +960,8 @@ struct rtsx_pcr {
>
> int num_slots;
> struct rtsx_slot *slots;
> +
> + u8 dma_error_count;
> };
>
> #define CHK_PCI_PID(pcr, pid) ((pcr)->pci->device == (pid))
--
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2017-05-23 6:59 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2017-05-23 2:00 [PATCH v5] mfd:rtsx: do retry when DMA transfer error steven_feng
2017-05-23 6:59 ` Lee Jones
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.