All of lore.kernel.org
 help / color / mirror / Atom feed
From: Steve Longerbeam <slongerbeam@gmail.com>
To: robh+dt@kernel.org, mark.rutland@arm.com, shawnguo@kernel.org,
	kernel@pengutronix.de, fabio.estevam@nxp.com,
	linux@armlinux.org.uk, mchehab@kernel.org, hverkuil@xs4all.nl,
	nick@shmanahar.org, markus.heiser@darmarIT.de,
	p.zabel@pengutronix.de,
	laurent.pinchart+renesas@ideasonboard.com, bparrot@ti.com,
	geert@linux-m68k.org, arnd@arndb.de, sudipm.mukherjee@gmail.com,
	minghsiu.tsai@mediatek.com, tiffany.lin@mediatek.com,
	jean-christophe.trotin@st.com, horms+renesas@verge.net.au,
	niklas.soderlund+renesas@ragnatech.se, robert.jarzmik@free.fr,
	songjun.wu@microchip.com, andrew-ct.chen@mediatek.com,
	gregkh@linuxfoundation.org, shuah@kernel.org,
	sakari.ailus@linux.intel.com, pavel@ucw.cz
Cc: devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org,
	linux-media@vger.kernel.org, devel@driverdev.osuosl.org,
	Russell King <rmk+kernel@armlinux.org.uk>,
	Steve Longerbeam <steve_longerbeam@mentor.com>
Subject: [PATCH v7 31/34] media: imx: csi: add frame size/interval enumeration
Date: Wed, 24 May 2017 17:29:46 -0700	[thread overview]
Message-ID: <1495672189-29164-32-git-send-email-steve_longerbeam@mentor.com> (raw)
In-Reply-To: <1495672189-29164-1-git-send-email-steve_longerbeam@mentor.com>

From: Russell King <rmk+kernel@armlinux.org.uk>

Add frame size and frame interval enumeration to CSI.

CSI can downscale the image independently horizontally and vertically by a
factor of two, which enumerates to four different frame sizes at the
output pads. The input pad supports a range of frame sizes.

CSI can also drop frames, resulting in frame rate reduction, so
enumerate the resulting possible output frame rates.

Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Steve Longerbeam <steve_longerbeam@mentor.com>
---
 drivers/staging/media/imx/imx-media-csi.c | 70 +++++++++++++++++++++++++++++++
 1 file changed, 70 insertions(+)

diff --git a/drivers/staging/media/imx/imx-media-csi.c b/drivers/staging/media/imx/imx-media-csi.c
index 9766dee..b8b3630 100644
--- a/drivers/staging/media/imx/imx-media-csi.c
+++ b/drivers/staging/media/imx/imx-media-csi.c
@@ -1163,6 +1163,74 @@ static int csi_enum_mbus_code(struct v4l2_subdev *sd,
 	return ret;
 }
 
+static int csi_enum_frame_size(struct v4l2_subdev *sd,
+			       struct v4l2_subdev_pad_config *cfg,
+			       struct v4l2_subdev_frame_size_enum *fse)
+{
+	struct csi_priv *priv = v4l2_get_subdevdata(sd);
+	struct v4l2_rect *crop;
+	int ret = 0;
+
+	if (fse->pad >= CSI_NUM_PADS ||
+	    fse->index > (fse->pad == CSI_SINK_PAD ? 0 : 3))
+		return -EINVAL;
+
+	mutex_lock(&priv->lock);
+
+	if (fse->pad == CSI_SINK_PAD) {
+		fse->min_width = MIN_W;
+		fse->max_width = MAX_W;
+		fse->min_height = MIN_H;
+		fse->max_height = MAX_H;
+	} else {
+		crop = __csi_get_crop(priv, cfg, fse->which);
+
+		fse->min_width = fse->max_width = fse->index & 1 ?
+			crop->width / 2 : crop->width;
+		fse->min_height = fse->max_height = fse->index & 2 ?
+			crop->height / 2 : crop->height;
+	}
+
+	mutex_unlock(&priv->lock);
+	return ret;
+}
+
+static int csi_enum_frame_interval(struct v4l2_subdev *sd,
+				   struct v4l2_subdev_pad_config *cfg,
+				   struct v4l2_subdev_frame_interval_enum *fie)
+{
+	struct csi_priv *priv = v4l2_get_subdevdata(sd);
+	struct v4l2_fract *input_fi;
+	struct v4l2_rect *crop;
+	int ret = 0;
+
+	if (fie->pad >= CSI_NUM_PADS ||
+	    fie->index >= (fie->pad != CSI_SRC_PAD_IDMAC ?
+			   1 : ARRAY_SIZE(csi_skip)))
+		return -EINVAL;
+
+	mutex_lock(&priv->lock);
+
+	input_fi = &priv->frame_interval[CSI_SINK_PAD];
+	crop = __csi_get_crop(priv, cfg, fie->which);
+
+	if ((fie->width != crop->width && fie->width != crop->width / 2) ||
+	    (fie->height != crop->height && fie->height != crop->height / 2)) {
+		ret = -EINVAL;
+		goto out;
+	}
+
+	fie->interval = *input_fi;
+
+	if (fie->pad == CSI_SRC_PAD_IDMAC)
+		csi_apply_skip_interval(&csi_skip[fie->index],
+					&fie->interval);
+
+out:
+	mutex_unlock(&priv->lock);
+	return ret;
+}
+
 static int csi_get_fmt(struct v4l2_subdev *sd,
 		       struct v4l2_subdev_pad_config *cfg,
 		       struct v4l2_subdev_format *sdformat)
@@ -1631,6 +1699,8 @@ static const struct v4l2_subdev_video_ops csi_video_ops = {
 
 static const struct v4l2_subdev_pad_ops csi_pad_ops = {
 	.enum_mbus_code = csi_enum_mbus_code,
+	.enum_frame_size = csi_enum_frame_size,
+	.enum_frame_interval = csi_enum_frame_interval,
 	.get_fmt = csi_get_fmt,
 	.set_fmt = csi_set_fmt,
 	.get_selection = csi_get_selection,
-- 
2.7.4

WARNING: multiple messages have this Message-ID (diff)
From: Steve Longerbeam <slongerbeam-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
To: robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org,
	mark.rutland-5wv7dgnIgG8@public.gmane.org,
	shawnguo-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org,
	kernel-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org,
	fabio.estevam-3arQi8VN3Tc@public.gmane.org,
	linux-I+IVW8TIWO2tmTQ+vhA3Yw@public.gmane.org,
	mchehab-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org,
	hverkuil-qWit8jRvyhVmR6Xm/wNWPw@public.gmane.org,
	nick-gcszYUEDH4VrovVCs/uTlw@public.gmane.org,
	markus.heiser-O6JHGLzbNUwb1SvskN2V4Q@public.gmane.org,
	p.zabel-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org,
	laurent.pinchart+renesas-ryLnwIuWjnjg/C1BVhZhaw@public.gmane.org,
	bparrot-l0cyMroinI0@public.gmane.org,
	geert-Td1EMuHUCqxL1ZNQvxDV9g@public.gmane.org,
	arnd-r2nGTMty4D4@public.gmane.org,
	sudipm.mukherjee-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org,
	minghsiu.tsai-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org,
	tiffany.lin-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org,
	jean-christophe.trotin-qxv4g6HH51o@public.gmane.org,
	horms+renesas-/R6kz+dDXgpPR4JQBCEnsQ@public.gmane.org,
	niklas.soderlund+renesas-1zkq55x86MTxsAP9Fp7wbw@public.gmane.org,
	robert.jarzmik-GANU6spQydw@public.gmane.org,
	songjun.wu-UWL1GkI3JZL3oGB3hsPCZA@public.gmane.org,
	andrew-ct.chen-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org,
	gregkh-hQyY1W1yCW8ekmWlsbkhG0B+6BGkLq7r@public.gmane.org,
	shuah-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org,
	sakari.ailus-VuQAYsv1563Yd54FQh9/CA@public.gmane.org,
	pavel-+ZI9xUNit7I@public.gmane.org
Cc: devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
	linux-media-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	devel-gWbeCf7V1WCQmaza687I9mD2FQJk+8+b@public.gmane.org,
	Russell King <rmk+kernel-I+IVW8TIWO2tmTQ+vhA3Yw@public.gmane.org>,
	Steve Longerbeam
	<steve_longerbeam-nmGgyN9QBj3QT0dZR+AlfA@public.gmane.org>
Subject: [PATCH v7 31/34] media: imx: csi: add frame size/interval enumeration
Date: Wed, 24 May 2017 17:29:46 -0700	[thread overview]
Message-ID: <1495672189-29164-32-git-send-email-steve_longerbeam@mentor.com> (raw)
In-Reply-To: <1495672189-29164-1-git-send-email-steve_longerbeam-nmGgyN9QBj3QT0dZR+AlfA@public.gmane.org>

From: Russell King <rmk+kernel-I+IVW8TIWO2tmTQ+vhA3Yw@public.gmane.org>

Add frame size and frame interval enumeration to CSI.

CSI can downscale the image independently horizontally and vertically by a
factor of two, which enumerates to four different frame sizes at the
output pads. The input pad supports a range of frame sizes.

CSI can also drop frames, resulting in frame rate reduction, so
enumerate the resulting possible output frame rates.

Signed-off-by: Russell King <rmk+kernel-I+IVW8TIWO2tmTQ+vhA3Yw@public.gmane.org>
Signed-off-by: Steve Longerbeam <steve_longerbeam-nmGgyN9QBj3QT0dZR+AlfA@public.gmane.org>
---
 drivers/staging/media/imx/imx-media-csi.c | 70 +++++++++++++++++++++++++++++++
 1 file changed, 70 insertions(+)

diff --git a/drivers/staging/media/imx/imx-media-csi.c b/drivers/staging/media/imx/imx-media-csi.c
index 9766dee..b8b3630 100644
--- a/drivers/staging/media/imx/imx-media-csi.c
+++ b/drivers/staging/media/imx/imx-media-csi.c
@@ -1163,6 +1163,74 @@ static int csi_enum_mbus_code(struct v4l2_subdev *sd,
 	return ret;
 }
 
+static int csi_enum_frame_size(struct v4l2_subdev *sd,
+			       struct v4l2_subdev_pad_config *cfg,
+			       struct v4l2_subdev_frame_size_enum *fse)
+{
+	struct csi_priv *priv = v4l2_get_subdevdata(sd);
+	struct v4l2_rect *crop;
+	int ret = 0;
+
+	if (fse->pad >= CSI_NUM_PADS ||
+	    fse->index > (fse->pad == CSI_SINK_PAD ? 0 : 3))
+		return -EINVAL;
+
+	mutex_lock(&priv->lock);
+
+	if (fse->pad == CSI_SINK_PAD) {
+		fse->min_width = MIN_W;
+		fse->max_width = MAX_W;
+		fse->min_height = MIN_H;
+		fse->max_height = MAX_H;
+	} else {
+		crop = __csi_get_crop(priv, cfg, fse->which);
+
+		fse->min_width = fse->max_width = fse->index & 1 ?
+			crop->width / 2 : crop->width;
+		fse->min_height = fse->max_height = fse->index & 2 ?
+			crop->height / 2 : crop->height;
+	}
+
+	mutex_unlock(&priv->lock);
+	return ret;
+}
+
+static int csi_enum_frame_interval(struct v4l2_subdev *sd,
+				   struct v4l2_subdev_pad_config *cfg,
+				   struct v4l2_subdev_frame_interval_enum *fie)
+{
+	struct csi_priv *priv = v4l2_get_subdevdata(sd);
+	struct v4l2_fract *input_fi;
+	struct v4l2_rect *crop;
+	int ret = 0;
+
+	if (fie->pad >= CSI_NUM_PADS ||
+	    fie->index >= (fie->pad != CSI_SRC_PAD_IDMAC ?
+			   1 : ARRAY_SIZE(csi_skip)))
+		return -EINVAL;
+
+	mutex_lock(&priv->lock);
+
+	input_fi = &priv->frame_interval[CSI_SINK_PAD];
+	crop = __csi_get_crop(priv, cfg, fie->which);
+
+	if ((fie->width != crop->width && fie->width != crop->width / 2) ||
+	    (fie->height != crop->height && fie->height != crop->height / 2)) {
+		ret = -EINVAL;
+		goto out;
+	}
+
+	fie->interval = *input_fi;
+
+	if (fie->pad == CSI_SRC_PAD_IDMAC)
+		csi_apply_skip_interval(&csi_skip[fie->index],
+					&fie->interval);
+
+out:
+	mutex_unlock(&priv->lock);
+	return ret;
+}
+
 static int csi_get_fmt(struct v4l2_subdev *sd,
 		       struct v4l2_subdev_pad_config *cfg,
 		       struct v4l2_subdev_format *sdformat)
@@ -1631,6 +1699,8 @@ static const struct v4l2_subdev_video_ops csi_video_ops = {
 
 static const struct v4l2_subdev_pad_ops csi_pad_ops = {
 	.enum_mbus_code = csi_enum_mbus_code,
+	.enum_frame_size = csi_enum_frame_size,
+	.enum_frame_interval = csi_enum_frame_interval,
 	.get_fmt = csi_get_fmt,
 	.set_fmt = csi_set_fmt,
 	.get_selection = csi_get_selection,
-- 
2.7.4

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

WARNING: multiple messages have this Message-ID (diff)
From: slongerbeam@gmail.com (Steve Longerbeam)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v7 31/34] media: imx: csi: add frame size/interval enumeration
Date: Wed, 24 May 2017 17:29:46 -0700	[thread overview]
Message-ID: <1495672189-29164-32-git-send-email-steve_longerbeam@mentor.com> (raw)
In-Reply-To: <1495672189-29164-1-git-send-email-steve_longerbeam@mentor.com>

From: Russell King <rmk+kernel@armlinux.org.uk>

Add frame size and frame interval enumeration to CSI.

CSI can downscale the image independently horizontally and vertically by a
factor of two, which enumerates to four different frame sizes at the
output pads. The input pad supports a range of frame sizes.

CSI can also drop frames, resulting in frame rate reduction, so
enumerate the resulting possible output frame rates.

Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Steve Longerbeam <steve_longerbeam@mentor.com>
---
 drivers/staging/media/imx/imx-media-csi.c | 70 +++++++++++++++++++++++++++++++
 1 file changed, 70 insertions(+)

diff --git a/drivers/staging/media/imx/imx-media-csi.c b/drivers/staging/media/imx/imx-media-csi.c
index 9766dee..b8b3630 100644
--- a/drivers/staging/media/imx/imx-media-csi.c
+++ b/drivers/staging/media/imx/imx-media-csi.c
@@ -1163,6 +1163,74 @@ static int csi_enum_mbus_code(struct v4l2_subdev *sd,
 	return ret;
 }
 
+static int csi_enum_frame_size(struct v4l2_subdev *sd,
+			       struct v4l2_subdev_pad_config *cfg,
+			       struct v4l2_subdev_frame_size_enum *fse)
+{
+	struct csi_priv *priv = v4l2_get_subdevdata(sd);
+	struct v4l2_rect *crop;
+	int ret = 0;
+
+	if (fse->pad >= CSI_NUM_PADS ||
+	    fse->index > (fse->pad == CSI_SINK_PAD ? 0 : 3))
+		return -EINVAL;
+
+	mutex_lock(&priv->lock);
+
+	if (fse->pad == CSI_SINK_PAD) {
+		fse->min_width = MIN_W;
+		fse->max_width = MAX_W;
+		fse->min_height = MIN_H;
+		fse->max_height = MAX_H;
+	} else {
+		crop = __csi_get_crop(priv, cfg, fse->which);
+
+		fse->min_width = fse->max_width = fse->index & 1 ?
+			crop->width / 2 : crop->width;
+		fse->min_height = fse->max_height = fse->index & 2 ?
+			crop->height / 2 : crop->height;
+	}
+
+	mutex_unlock(&priv->lock);
+	return ret;
+}
+
+static int csi_enum_frame_interval(struct v4l2_subdev *sd,
+				   struct v4l2_subdev_pad_config *cfg,
+				   struct v4l2_subdev_frame_interval_enum *fie)
+{
+	struct csi_priv *priv = v4l2_get_subdevdata(sd);
+	struct v4l2_fract *input_fi;
+	struct v4l2_rect *crop;
+	int ret = 0;
+
+	if (fie->pad >= CSI_NUM_PADS ||
+	    fie->index >= (fie->pad != CSI_SRC_PAD_IDMAC ?
+			   1 : ARRAY_SIZE(csi_skip)))
+		return -EINVAL;
+
+	mutex_lock(&priv->lock);
+
+	input_fi = &priv->frame_interval[CSI_SINK_PAD];
+	crop = __csi_get_crop(priv, cfg, fie->which);
+
+	if ((fie->width != crop->width && fie->width != crop->width / 2) ||
+	    (fie->height != crop->height && fie->height != crop->height / 2)) {
+		ret = -EINVAL;
+		goto out;
+	}
+
+	fie->interval = *input_fi;
+
+	if (fie->pad == CSI_SRC_PAD_IDMAC)
+		csi_apply_skip_interval(&csi_skip[fie->index],
+					&fie->interval);
+
+out:
+	mutex_unlock(&priv->lock);
+	return ret;
+}
+
 static int csi_get_fmt(struct v4l2_subdev *sd,
 		       struct v4l2_subdev_pad_config *cfg,
 		       struct v4l2_subdev_format *sdformat)
@@ -1631,6 +1699,8 @@ static const struct v4l2_subdev_video_ops csi_video_ops = {
 
 static const struct v4l2_subdev_pad_ops csi_pad_ops = {
 	.enum_mbus_code = csi_enum_mbus_code,
+	.enum_frame_size = csi_enum_frame_size,
+	.enum_frame_interval = csi_enum_frame_interval,
 	.get_fmt = csi_get_fmt,
 	.set_fmt = csi_set_fmt,
 	.get_selection = csi_get_selection,
-- 
2.7.4

  parent reply	other threads:[~2017-05-25  0:33 UTC|newest]

Thread overview: 196+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-05-25  0:29 [PATCH v7 00/34] i.MX Media Driver Steve Longerbeam
2017-05-25  0:29 ` Steve Longerbeam
2017-05-25  0:29 ` Steve Longerbeam
2017-05-25  0:29 ` [PATCH v7 01/34] dt-bindings: Add bindings for video-multiplexer device Steve Longerbeam
2017-05-25  0:29   ` Steve Longerbeam
2017-05-25  0:29   ` Steve Longerbeam
2017-05-25  0:29 ` [PATCH v7 02/34] [media] dt-bindings: Add bindings for i.MX media driver Steve Longerbeam
2017-05-25  0:29   ` Steve Longerbeam
2017-05-25  0:29   ` Steve Longerbeam
2017-05-25  0:29 ` [PATCH v7 03/34] [media] dt/bindings: Add bindings for OV5640 Steve Longerbeam
2017-05-25  0:29   ` Steve Longerbeam
2017-05-25  0:29   ` Steve Longerbeam
2017-05-25  0:29 ` [PATCH v7 04/34] ARM: dts: imx6qdl: add multiplexer controls Steve Longerbeam
2017-05-25  0:29   ` Steve Longerbeam
2017-05-25  0:29   ` Steve Longerbeam
2017-05-25  0:29 ` [PATCH v7 05/34] ARM: dts: imx6qdl: Add compatible, clocks, irqs to MIPI CSI-2 node Steve Longerbeam
2017-05-25  0:29   ` Steve Longerbeam
2017-05-25  0:29   ` Steve Longerbeam
2017-05-25  0:29 ` [PATCH v7 06/34] ARM: dts: imx6qdl: Add video multiplexers, mipi_csi, and their connections Steve Longerbeam
2017-05-25  0:29   ` Steve Longerbeam
2017-05-25  0:29   ` Steve Longerbeam
2017-05-25  0:29 ` [PATCH v7 07/34] ARM: dts: imx6qdl: add capture-subsystem device Steve Longerbeam
2017-05-25  0:29   ` Steve Longerbeam
2017-05-25  0:29   ` Steve Longerbeam
2017-05-25  0:29 ` [PATCH v7 08/34] ARM: dts: imx6qdl-sabrelite: remove erratum ERR006687 workaround Steve Longerbeam
2017-05-25  0:29   ` Steve Longerbeam
2017-05-25  0:29   ` Steve Longerbeam
2017-05-25  0:29 ` [PATCH v7 09/34] ARM: dts: imx6-sabrelite: add OV5642 and OV5640 camera sensors Steve Longerbeam
2017-05-25  0:29   ` Steve Longerbeam
2017-05-25  0:29   ` Steve Longerbeam
2017-05-25  0:29 ` [PATCH v7 10/34] ARM: dts: imx6-sabresd: " Steve Longerbeam
2017-05-25  0:29   ` Steve Longerbeam
2017-05-25  0:29   ` Steve Longerbeam
2017-05-25  0:29 ` [PATCH v7 11/34] ARM: dts: imx6-sabreauto: create i2cmux for i2c3 Steve Longerbeam
2017-05-25  0:29   ` Steve Longerbeam
2017-05-25  0:29   ` Steve Longerbeam
2017-05-25  0:29 ` [PATCH v7 12/34] ARM: dts: imx6-sabreauto: add reset-gpios property for max7310_b Steve Longerbeam
2017-05-25  0:29   ` Steve Longerbeam
2017-05-25  0:29   ` Steve Longerbeam
2017-05-25  0:29 ` [PATCH v7 13/34] ARM: dts: imx6-sabreauto: add pinctrl for gpt input capture Steve Longerbeam
2017-05-25  0:29   ` Steve Longerbeam
2017-05-25  0:29   ` Steve Longerbeam
2017-05-25  0:29 ` [PATCH v7 14/34] ARM: dts: imx6-sabreauto: add the ADV7180 video decoder Steve Longerbeam
2017-05-25  0:29   ` Steve Longerbeam
2017-05-25  0:29   ` Steve Longerbeam
2017-05-25  0:29 ` [PATCH v7 15/34] add mux and video interface bridge entity functions Steve Longerbeam
2017-05-25  0:29   ` Steve Longerbeam
2017-05-25  0:29   ` Steve Longerbeam
2017-05-29 13:37   ` Hans Verkuil
2017-05-29 13:37     ` Hans Verkuil
2017-05-29 13:37     ` Hans Verkuil
2017-05-29 13:51     ` Philipp Zabel
2017-05-29 13:51       ` Philipp Zabel
2017-05-29 13:51       ` Philipp Zabel
2017-05-29 13:52       ` Hans Verkuil
2017-05-29 13:52         ` Hans Verkuil
2017-05-29 13:52         ` Hans Verkuil
2017-05-25  0:29 ` [PATCH v7 16/34] [media] add Omnivision OV5640 sensor driver Steve Longerbeam
2017-05-25  0:29   ` Steve Longerbeam
2017-05-25  0:29   ` Steve Longerbeam
2017-05-29 13:39   ` Hans Verkuil
2017-05-29 13:39     ` Hans Verkuil
2017-05-29 15:55   ` Sakari Ailus
2017-05-29 15:55     ` Sakari Ailus
2017-05-29 15:55     ` Sakari Ailus
2017-05-29 21:49     ` Steve Longerbeam
2017-05-29 21:50     ` Steve Longerbeam
2017-05-29 21:50       ` Steve Longerbeam
2017-05-29 21:50       ` Steve Longerbeam
2017-05-30  6:56       ` Sakari Ailus
2017-05-30  6:56         ` Sakari Ailus
2017-05-30  6:56         ` Sakari Ailus
2017-06-03 18:02         ` Steve Longerbeam
2017-06-03 18:02           ` Steve Longerbeam
2017-06-03 18:02           ` Steve Longerbeam
2017-06-04 18:00           ` Steve Longerbeam
2017-06-04 18:00             ` Steve Longerbeam
2017-06-04 18:00             ` Steve Longerbeam
2017-06-07 12:31             ` Sakari Ailus
2017-06-07 12:31               ` Sakari Ailus
2017-06-07 12:31               ` Sakari Ailus
2017-05-31 19:58   ` Pavel Machek
2017-05-31 19:58     ` Pavel Machek
2017-05-31 19:58     ` Pavel Machek
2017-06-01  8:26     ` Sakari Ailus
2017-06-01  8:26       ` Sakari Ailus
2017-06-01  8:26       ` Sakari Ailus
2017-06-01  8:43       ` exposure vs. exposure_absolute was " Pavel Machek
2017-06-01  8:43         ` Pavel Machek
2017-06-01  8:43         ` Pavel Machek
2017-06-03 19:38       ` Steve Longerbeam
2017-06-03 19:38         ` Steve Longerbeam
2017-06-03 19:38         ` Steve Longerbeam
2017-06-03 19:51         ` Pavel Machek
2017-06-03 19:51           ` Pavel Machek
2017-06-03 19:51           ` Pavel Machek
2017-06-03 21:57           ` Sakari Ailus
2017-06-03 21:57             ` Sakari Ailus
2017-06-03 21:57             ` Sakari Ailus
2017-06-03 22:17             ` Pavel Machek
2017-06-03 22:17               ` Pavel Machek
2017-06-03 22:17               ` Pavel Machek
2017-06-04  4:46             ` Steve Longerbeam
2017-06-04  4:46               ` Steve Longerbeam
2017-06-04  4:46               ` Steve Longerbeam
2017-06-07 12:31               ` Sakari Ailus
2017-06-07 12:31                 ` Sakari Ailus
2017-06-07 12:31                 ` Sakari Ailus
2017-05-25  0:29 ` [PATCH v7 17/34] platform: add video-multiplexer subdevice driver Steve Longerbeam
2017-05-25  0:29   ` Steve Longerbeam
2017-05-25  0:29   ` Steve Longerbeam
2017-05-25  0:29 ` [PATCH v7 18/34] platform: video-mux: include temporary mmio-mux support Steve Longerbeam
2017-05-25  0:29   ` Steve Longerbeam
2017-05-25  0:29   ` Steve Longerbeam
2017-05-25  7:51   ` [PATCH] platform: video-mux: fix ptr_ret.cocci warnings kbuild test robot
2017-05-25  7:51     ` kbuild test robot
2017-05-25  7:51     ` kbuild test robot
2017-05-25  7:51   ` [PATCH v7 18/34] platform: video-mux: include temporary mmio-mux support kbuild test robot
2017-05-25  7:51     ` kbuild test robot
2017-05-25  7:51     ` kbuild test robot
2017-05-25  0:29 ` [PATCH v7 19/34] media: Add userspace header file for i.MX Steve Longerbeam
2017-05-25  0:29   ` Steve Longerbeam
2017-05-25  0:29 ` [PATCH v7 20/34] media: Add i.MX media core driver Steve Longerbeam
2017-05-25  0:29   ` Steve Longerbeam
2017-05-25  0:29 ` [PATCH v7 21/34] media: imx: Add Capture Device Interface Steve Longerbeam
2017-05-25  0:29   ` Steve Longerbeam
2017-05-25  0:29   ` Steve Longerbeam
2017-05-25  0:29 ` [PATCH v7 22/34] media: imx: Add CSI subdev driver Steve Longerbeam
2017-05-25  0:29   ` Steve Longerbeam
2017-05-25  0:29   ` Steve Longerbeam
2017-05-25  0:29 ` [PATCH v7 23/34] media: imx: Add VDIC " Steve Longerbeam
2017-05-25  0:29   ` Steve Longerbeam
2017-05-25  0:29   ` Steve Longerbeam
2017-05-25  0:29 ` [PATCH v7 24/34] media: imx: Add IC subdev drivers Steve Longerbeam
2017-05-25  0:29   ` Steve Longerbeam
2017-05-25  0:29   ` Steve Longerbeam
2017-05-25  0:29 ` [PATCH v7 25/34] media: imx: Add MIPI CSI-2 Receiver subdev driver Steve Longerbeam
2017-05-25  0:29   ` Steve Longerbeam
2017-05-25  0:29 ` [PATCH v7 26/34] ARM: imx_v6_v7_defconfig: Enable staging video4linux drivers Steve Longerbeam
2017-05-25  0:29   ` Steve Longerbeam
2017-05-25  0:29   ` Steve Longerbeam
2017-05-25  0:29 ` [PATCH v7 27/34] media: imx: csi: add support for bayer formats Steve Longerbeam
2017-05-25  0:29   ` Steve Longerbeam
2017-05-25  0:29 ` [PATCH v7 28/34] media: imx: csi: increase burst size for YUV formats Steve Longerbeam
2017-05-25  0:29   ` Steve Longerbeam
2017-05-25  0:29   ` Steve Longerbeam
2017-05-25  0:29 ` [PATCH v7 29/34] media: imx: csi: add frame skipping support Steve Longerbeam
2017-05-25  0:29   ` Steve Longerbeam
2017-05-25  0:29 ` [PATCH v7 30/34] media: imx: csi: add sink selection rectangles Steve Longerbeam
2017-05-25  0:29   ` Steve Longerbeam
2017-05-25  0:29 ` Steve Longerbeam [this message]
2017-05-25  0:29   ` [PATCH v7 31/34] media: imx: csi: add frame size/interval enumeration Steve Longerbeam
2017-05-25  0:29   ` Steve Longerbeam
2017-05-25  0:29 ` [PATCH v7 32/34] media: imx: capture: add frame sizes/interval enumeration Steve Longerbeam
2017-05-25  0:29   ` Steve Longerbeam
2017-05-25  0:29   ` Steve Longerbeam
2017-05-25  0:29 ` [PATCH v7 33/34] media: imx: set and propagate default field, colorimetry Steve Longerbeam
2017-05-25  0:29   ` Steve Longerbeam
2017-05-25  0:29 ` [PATCH v7 34/34] media: imx: Drop warning upon multiple S_STREAM disable calls Steve Longerbeam
2017-05-25  0:29   ` Steve Longerbeam
2017-05-29 13:46 ` [PATCH v7 00/34] i.MX Media Driver Hans Verkuil
2017-05-29 13:46   ` Hans Verkuil
2017-05-29 13:46   ` Hans Verkuil
2017-05-29 14:15   ` Philipp Zabel
2017-05-29 14:15     ` Philipp Zabel
2017-05-29 14:15     ` Philipp Zabel
2017-05-29 14:21     ` Hans Verkuil
2017-05-29 14:21       ` Hans Verkuil
2017-05-29 14:21       ` Hans Verkuil
2017-05-29 15:24       ` Hans Verkuil
2017-05-29 15:24         ` Hans Verkuil
2017-05-29 15:24         ` Hans Verkuil
2017-05-29 15:36   ` Sakari Ailus
2017-05-29 15:36     ` Sakari Ailus
2017-05-29 15:36     ` Sakari Ailus
2017-05-29 16:29     ` Hans Verkuil
2017-05-29 16:29       ` Hans Verkuil
2017-05-29 16:29       ` Hans Verkuil
2017-05-29 18:12     ` Steve Longerbeam
2017-05-29 18:12       ` Steve Longerbeam
2017-05-29 18:12       ` Steve Longerbeam
2017-05-31 20:11       ` Pavel Machek
2017-05-31 20:11         ` Pavel Machek
2017-05-31 20:11         ` Pavel Machek
2017-05-29 17:23   ` Steve Longerbeam
2017-05-29 17:23     ` Steve Longerbeam
2017-05-29 17:23     ` Steve Longerbeam
2017-05-29 17:29     ` Hans Verkuil
2017-05-29 17:29       ` Hans Verkuil
2017-05-29 17:29       ` Hans Verkuil
2017-06-02  0:25 ` Tim Harvey
2017-06-02  0:25   ` Tim Harvey
2017-06-02  0:25   ` Tim Harvey
2017-06-02  0:43   ` Steve Longerbeam
2017-06-02  0:43     ` Steve Longerbeam
2017-06-02  0:43     ` Steve Longerbeam

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1495672189-29164-32-git-send-email-steve_longerbeam@mentor.com \
    --to=slongerbeam@gmail.com \
    --cc=andrew-ct.chen@mediatek.com \
    --cc=arnd@arndb.de \
    --cc=bparrot@ti.com \
    --cc=devel@driverdev.osuosl.org \
    --cc=devicetree@vger.kernel.org \
    --cc=fabio.estevam@nxp.com \
    --cc=geert@linux-m68k.org \
    --cc=gregkh@linuxfoundation.org \
    --cc=horms+renesas@verge.net.au \
    --cc=hverkuil@xs4all.nl \
    --cc=jean-christophe.trotin@st.com \
    --cc=kernel@pengutronix.de \
    --cc=laurent.pinchart+renesas@ideasonboard.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-media@vger.kernel.org \
    --cc=linux@armlinux.org.uk \
    --cc=mark.rutland@arm.com \
    --cc=markus.heiser@darmarIT.de \
    --cc=mchehab@kernel.org \
    --cc=minghsiu.tsai@mediatek.com \
    --cc=nick@shmanahar.org \
    --cc=niklas.soderlund+renesas@ragnatech.se \
    --cc=p.zabel@pengutronix.de \
    --cc=pavel@ucw.cz \
    --cc=rmk+kernel@armlinux.org.uk \
    --cc=robert.jarzmik@free.fr \
    --cc=robh+dt@kernel.org \
    --cc=sakari.ailus@linux.intel.com \
    --cc=shawnguo@kernel.org \
    --cc=shuah@kernel.org \
    --cc=songjun.wu@microchip.com \
    --cc=steve_longerbeam@mentor.com \
    --cc=sudipm.mukherjee@gmail.com \
    --cc=tiffany.lin@mediatek.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.