From: Shawn Guo <shawnguo@kernel.org>
To: Wolfram Sang <wsa@the-dreams.de>
Cc: linux-i2c@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
Baoyou Xie <xie.baoyou@sanechips.com.cn>,
Xin Zhou <zhou.xin8@sanechips.com.cn>,
Baoyou Xie <baoyou.xie@linaro.org>,
Shawn Guo <shawn.guo@linaro.org>
Subject: [PATCH 1/2] dt: bindings: add documentation for zx2967 family i2c controller
Date: Sun, 28 May 2017 12:59:35 +0800 [thread overview]
Message-ID: <1495947576-11037-2-git-send-email-shawnguo@kernel.org> (raw)
In-Reply-To: <1495947576-11037-1-git-send-email-shawnguo@kernel.org>
From: Baoyou Xie <baoyou.xie@linaro.org>
This patch adds dt-binding documentation for zx2967 family
i2c controller.
Signed-off-by: Baoyou Xie <baoyou.xie@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
---
.../devicetree/bindings/i2c/i2c-zx2967.txt | 22 ++++++++++++++++++++++
1 file changed, 22 insertions(+)
create mode 100644 Documentation/devicetree/bindings/i2c/i2c-zx2967.txt
diff --git a/Documentation/devicetree/bindings/i2c/i2c-zx2967.txt b/Documentation/devicetree/bindings/i2c/i2c-zx2967.txt
new file mode 100644
index 000000000000..cb806d1ae4c9
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/i2c-zx2967.txt
@@ -0,0 +1,22 @@
+ZTE zx2967 I2C controller
+
+Required properties:
+ - compatible: must be "zte,zx296718-i2c"
+ - reg: physical address and length of the device registers
+ - interrupts: a single interrupt specifier
+ - clocks: clock for the device
+ - #address-cells: should be <1>
+ - #size-cells: should be <0>
+ - clock-frequency: the desired I2C bus clock frequency.
+
+Examples:
+
+ i2c@112000 {
+ compatible = "zte,zx296718-i2c";
+ reg = <0x00112000 0x1000>;
+ interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&osc24m>;
+ #address-cells = <1>
+ #size-cells = <0>;
+ clock-frequency = <1600000>;
+ };
--
1.9.1
WARNING: multiple messages have this Message-ID (diff)
From: shawnguo@kernel.org (Shawn Guo)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 1/2] dt: bindings: add documentation for zx2967 family i2c controller
Date: Sun, 28 May 2017 12:59:35 +0800 [thread overview]
Message-ID: <1495947576-11037-2-git-send-email-shawnguo@kernel.org> (raw)
In-Reply-To: <1495947576-11037-1-git-send-email-shawnguo@kernel.org>
From: Baoyou Xie <baoyou.xie@linaro.org>
This patch adds dt-binding documentation for zx2967 family
i2c controller.
Signed-off-by: Baoyou Xie <baoyou.xie@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
---
.../devicetree/bindings/i2c/i2c-zx2967.txt | 22 ++++++++++++++++++++++
1 file changed, 22 insertions(+)
create mode 100644 Documentation/devicetree/bindings/i2c/i2c-zx2967.txt
diff --git a/Documentation/devicetree/bindings/i2c/i2c-zx2967.txt b/Documentation/devicetree/bindings/i2c/i2c-zx2967.txt
new file mode 100644
index 000000000000..cb806d1ae4c9
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/i2c-zx2967.txt
@@ -0,0 +1,22 @@
+ZTE zx2967 I2C controller
+
+Required properties:
+ - compatible: must be "zte,zx296718-i2c"
+ - reg: physical address and length of the device registers
+ - interrupts: a single interrupt specifier
+ - clocks: clock for the device
+ - #address-cells: should be <1>
+ - #size-cells: should be <0>
+ - clock-frequency: the desired I2C bus clock frequency.
+
+Examples:
+
+ i2c at 112000 {
+ compatible = "zte,zx296718-i2c";
+ reg = <0x00112000 0x1000>;
+ interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&osc24m>;
+ #address-cells = <1>
+ #size-cells = <0>;
+ clock-frequency = <1600000>;
+ };
--
1.9.1
next prev parent reply other threads:[~2017-05-28 5:00 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-05-28 4:59 [PATCH 0/2] Add I2C driver for ZTE ZX2967 family SoCs Shawn Guo
2017-05-28 4:59 ` Shawn Guo
2017-05-28 4:59 ` Shawn Guo [this message]
2017-05-28 4:59 ` [PATCH 1/2] dt: bindings: add documentation for zx2967 family i2c controller Shawn Guo
2017-05-28 4:59 ` [PATCH 2/2] i2c: zx2967: add i2c controller driver for ZTE's zx2967 family Shawn Guo
2017-05-28 4:59 ` Shawn Guo
2017-06-19 19:31 ` Wolfram Sang
2017-06-19 19:31 ` Wolfram Sang
2017-06-20 2:58 ` Shawn Guo
2017-06-20 2:58 ` Shawn Guo
2017-06-20 7:41 ` Wolfram Sang
2017-06-20 7:41 ` Wolfram Sang
2017-06-21 16:06 ` Shawn Guo
2017-06-21 16:06 ` Shawn Guo
2017-06-22 7:48 ` Shawn Guo
2017-06-22 7:48 ` Shawn Guo
2017-06-22 8:07 ` Wolfram Sang
2017-06-22 8:07 ` Wolfram Sang
2017-06-22 12:25 ` Shawn Guo
2017-06-22 12:25 ` Shawn Guo
2017-06-22 13:22 ` Wolfram Sang
2017-06-22 13:22 ` Wolfram Sang
2017-06-10 14:32 ` [PATCH 0/2] Add I2C driver for ZTE ZX2967 family SoCs Shawn Guo
2017-06-10 14:32 ` Shawn Guo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1495947576-11037-2-git-send-email-shawnguo@kernel.org \
--to=shawnguo@kernel.org \
--cc=baoyou.xie@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-i2c@vger.kernel.org \
--cc=shawn.guo@linaro.org \
--cc=wsa@the-dreams.de \
--cc=xie.baoyou@sanechips.com.cn \
--cc=zhou.xin8@sanechips.com.cn \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.