* [U-Boot] [PATCH] axs10x: Get rid of both I2C and EEPROM who used to use I2C
@ 2017-06-01 14:14 Alexey Brodkin
2017-06-02 2:56 ` Simon Glass
0 siblings, 1 reply; 2+ messages in thread
From: Alexey Brodkin @ 2017-06-01 14:14 UTC (permalink / raw)
To: u-boot
With eb5ba3aefdf0 "i2c: Drop use of CONFIG_I2C_HARD" in place we
cannot use I2C EEPROM any longer so we're dropping all references to
both EEPROM and I2C which was only used for EEPROM.
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Cc: Simon Glass <sjg@chromium.org>
---
configs/axs101_defconfig | 1 -
configs/axs103_defconfig | 1 -
include/configs/axs10x.h | 26 --------------------------
3 files changed, 28 deletions(-)
diff --git a/configs/axs101_defconfig b/configs/axs101_defconfig
index 9d7dc7f7c053..0b1565249348 100644
--- a/configs/axs101_defconfig
+++ b/configs/axs101_defconfig
@@ -21,7 +21,6 @@ CONFIG_OF_CONTROL=y
CONFIG_OF_EMBED=y
CONFIG_NET_RANDOM_ETHADDR=y
CONFIG_DM=y
-CONFIG_SYS_I2C_DW=y
CONFIG_MMC=y
CONFIG_MMC_DW=y
CONFIG_DM_ETH=y
diff --git a/configs/axs103_defconfig b/configs/axs103_defconfig
index bcd4754eef7c..add24cfe229f 100644
--- a/configs/axs103_defconfig
+++ b/configs/axs103_defconfig
@@ -21,7 +21,6 @@ CONFIG_OF_CONTROL=y
CONFIG_OF_EMBED=y
CONFIG_NET_RANDOM_ETHADDR=y
CONFIG_DM=y
-CONFIG_SYS_I2C_DW=y
CONFIG_MMC=y
CONFIG_MMC_DW=y
CONFIG_DM_ETH=y
diff --git a/include/configs/axs10x.h b/include/configs/axs10x.h
index e78a7a140a10..5ecdc764ace3 100644
--- a/include/configs/axs10x.h
+++ b/include/configs/axs10x.h
@@ -52,32 +52,6 @@
#define CONFIG_SYS_NS16550_MEM32
/*
- * I2C configuration
- */
-#define CONFIG_SYS_I2C
-#define CONFIG_I2C_ENV_EEPROM_BUS 2
-#define CONFIG_SYS_I2C_SPEED 100000
-#define CONFIG_SYS_I2C_SPEED1 100000
-#define CONFIG_SYS_I2C_SPEED2 100000
-#define CONFIG_SYS_I2C_SLAVE 0
-#define CONFIG_SYS_I2C_SLAVE1 0
-#define CONFIG_SYS_I2C_SLAVE2 0
-#define CONFIG_SYS_I2C_BASE 0xE001D000
-#define CONFIG_SYS_I2C_BASE1 0xE001E000
-#define CONFIG_SYS_I2C_BASE2 0xE001F000
-#define CONFIG_SYS_I2C_BUS_MAX 3
-#define IC_CLK 50
-
-/*
- * EEPROM configuration
- */
-#define CONFIG_SYS_I2C_EEPROM_ADDR (0xA8 >> 1)
-#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1
-#define CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW 1
-#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3
-#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 64
-
-/*
* Ethernet PHY configuration
*/
#define CONFIG_MII
--
2.7.5
^ permalink raw reply related [flat|nested] 2+ messages in thread
* [U-Boot] [PATCH] axs10x: Get rid of both I2C and EEPROM who used to use I2C
2017-06-01 14:14 [U-Boot] [PATCH] axs10x: Get rid of both I2C and EEPROM who used to use I2C Alexey Brodkin
@ 2017-06-02 2:56 ` Simon Glass
0 siblings, 0 replies; 2+ messages in thread
From: Simon Glass @ 2017-06-02 2:56 UTC (permalink / raw)
To: u-boot
On 1 June 2017 at 08:14, Alexey Brodkin <Alexey.Brodkin@synopsys.com> wrote:
> With eb5ba3aefdf0 "i2c: Drop use of CONFIG_I2C_HARD" in place we
> cannot use I2C EEPROM any longer so we're dropping all references to
> both EEPROM and I2C which was only used for EEPROM.
>
> Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
> Cc: Simon Glass <sjg@chromium.org>
> ---
> configs/axs101_defconfig | 1 -
> configs/axs103_defconfig | 1 -
> include/configs/axs10x.h | 26 --------------------------
> 3 files changed, 28 deletions(-)
Reviewed-by: Simon Glass <sjg@chromium.org>
There is an i2c-eeprom driver if you want to use it.
Regards,
Simon
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2017-06-02 2:56 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2017-06-01 14:14 [U-Boot] [PATCH] axs10x: Get rid of both I2C and EEPROM who used to use I2C Alexey Brodkin
2017-06-02 2:56 ` Simon Glass
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.