[U-Boot] [PATCH v7 0/6] Add Intel Arria 10 SoC FPGA driver

[U-Boot] [PATCH v7 0/6] Add Intel Arria 10 SoC FPGA driver

[tien.fong.chee at intel.com]

From: Tien Fong Chee <tien.fong.chee@intel.com>

This is the 6th version of patchset to adds support for Intel Arria 10 SoC FPGA
driver. This version mainly resolved comments from Dinh in [v6].
This series is working on top of u-boot.git - http://git.denx.de/u-boot.git.

[v5]: https://www.mail-archive.com/u-boot at lists.denx.de/msg250687.html

v6 -> v7 changes:
-----------------
- Changed commit header of patch 4/6 to more generic.

Patchset history
----------------
[v1]: https://www.mail-archive.com/u-boot at lists.denx.de/msg247788.html
[v2]: https://www.mail-archive.com/u-boot at lists.denx.de/msg248541.html
[v3]: https://www.mail-archive.com/u-boot at lists.denx.de/msg249160.html
[v4]: https://www.mail-archive.com/u-boot at lists.denx.de/msg250149.html
[v5]: https://www.mail-archive.com/u-boot at lists.denx.de/msg250517.html

Tien Fong Chee (6):
  arm: socfpga: Remove unused passing parameter of socfpga_bridges_reset
  arm: socfpga: Restructure FPGA driver in the preparation to support
    A10
  arm: socfpga: Enable FPGA driver on SPL
  drivers: Enable FPGA driver build on SPL
  arm: socfpga: Move FPGA manager driver to FPGA driver
  arm: socfpga: Add FPGA driver support for Arria 10

 arch/arm/mach-socfpga/Makefile                     |   1 -
 arch/arm/mach-socfpga/fpga_manager.c               |  78 ----
 arch/arm/mach-socfpga/include/mach/fpga_manager.h  |  70 +--
 .../include/mach/fpga_manager_arria10.h            | 100 +++++
 .../mach/{fpga_manager.h => fpga_manager_gen5.h}   |  69 ++-
 .../include/mach/reset_manager_arria10.h           |   2 +-
 arch/arm/mach-socfpga/reset_manager_arria10.c      |   4 +-
 drivers/Makefile                                   |   1 +
 drivers/fpga/Makefile                              |   2 +
 drivers/fpga/socfpga.c                             | 241 +----------
 drivers/fpga/socfpga_arria10.c                     | 479 +++++++++++++++++++++
 drivers/fpga/{socfpga.c => socfpga_gen5.c}         |  98 ++---
 include/configs/socfpga_common.h                   |   4 +-
 13 files changed, 685 insertions(+), 464 deletions(-)
 delete mode 100644 arch/arm/mach-socfpga/fpga_manager.c
 create mode 100644 arch/arm/mach-socfpga/include/mach/fpga_manager_arria10.h
 copy arch/arm/mach-socfpga/include/mach/{fpga_manager.h => fpga_manager_gen5.h} (57%)
 create mode 100644 drivers/fpga/socfpga_arria10.c
 copy drivers/fpga/{socfpga.c => socfpga_gen5.c} (85%)

-- 
2.2.0

[U-Boot] [PATCH v7 1/6] arm: socfpga: Remove unused passing parameter of socfpga_bridges_reset

[tien.fong.chee at intel.com]

From: Tien Fong Chee <tien.fong.chee@intel.com>

Remove parameter from socfpga_bridges_reset(), and keeping this function
for single purpose which is just triggering reset on bridges.
socfpga_reset_deassert_bridges_handoff() can be called for releasing reset
on any bridges based on the bridge setting defined in fdt.

Signed-off-by: Tien Fong Chee <tien.fong.chee@intel.com>
---
 arch/arm/mach-socfpga/include/mach/reset_manager_arria10.h | 2 +-
 arch/arm/mach-socfpga/reset_manager_arria10.c              | 4 ++--
 2 files changed, 3 insertions(+), 3 deletions(-)

diff --git a/arch/arm/mach-socfpga/include/mach/reset_manager_arria10.h b/arch/arm/mach-socfpga/include/mach/reset_manager_arria10.h
index 7922db8..b6d7f4f 100644
--- a/arch/arm/mach-socfpga/include/mach/reset_manager_arria10.h
+++ b/arch/arm/mach-socfpga/include/mach/reset_manager_arria10.h
@@ -17,7 +17,7 @@ int socfpga_reset_deassert_bridges_handoff(void);
 void socfpga_reset_assert_fpga_connected_peripherals(void);
 void socfpga_reset_deassert_osc1wd0(void);
 void socfpga_reset_uart(int assert);
-int socfpga_bridges_reset(int enable);
+int socfpga_bridges_reset(void);
 
 struct socfpga_reset_manager {
 	u32	stat;
diff --git a/arch/arm/mach-socfpga/reset_manager_arria10.c b/arch/arm/mach-socfpga/reset_manager_arria10.c
index d8c858c..66f1ec2 100644
--- a/arch/arm/mach-socfpga/reset_manager_arria10.c
+++ b/arch/arm/mach-socfpga/reset_manager_arria10.c
@@ -318,13 +318,13 @@ void socfpga_per_reset_all(void)
 }
 
 #if defined(CONFIG_SOCFPGA_VIRTUAL_TARGET)
-int socfpga_bridges_reset(int enable)
+int socfpga_bridges_reset(void)
 {
 	/* For SoCFPGA-VT, this is NOP. */
 	return 0;
 }
 #else
-int socfpga_bridges_reset(int enable)
+int socfpga_bridges_reset(void)
 {
 	int ret;
 
-- 
2.2.0

[U-Boot] [PATCH v7 2/6] arm: socfpga: Restructure FPGA driver in the preparation to support A10

[tien.fong.chee at intel.com]

From: Tien Fong Chee <tien.fong.chee@intel.com>

Move FPGA driver which is Gen5 specific code into Gen5 driver file
and keeping common FPGA driver intact. All the changes are still keeping
in driver/fpga/ and no functional change. Subsequent patch would move
FPGA manager driver from arch/arm into driver/fpga/.

Signed-off-by: Tien Fong Chee <tien.fong.chee@intel.com>
---
 arch/arm/mach-socfpga/Makefile                     |   2 +-
 arch/arm/mach-socfpga/include/mach/fpga_manager.h  |  68 +-----
 .../mach/{fpga_manager.h => fpga_manager_gen5.h}   |  69 +++---
 drivers/fpga/Makefile                              |   1 +
 drivers/fpga/socfpga.c                             | 241 +--------------------
 drivers/fpga/{socfpga.c => socfpga_gen5.c}         |  54 +----
 6 files changed, 49 insertions(+), 386 deletions(-)
 copy arch/arm/mach-socfpga/include/mach/{fpga_manager.h => fpga_manager_gen5.h} (57%)
 copy drivers/fpga/{socfpga.c => socfpga_gen5.c} (83%)

diff --git a/arch/arm/mach-socfpga/Makefile b/arch/arm/mach-socfpga/Makefile
index 41b779c..286bfef 100644
--- a/arch/arm/mach-socfpga/Makefile
+++ b/arch/arm/mach-socfpga/Makefile
@@ -9,7 +9,6 @@
 
 obj-y	+= board.o
 obj-y	+= clock_manager.o
-obj-y	+= fpga_manager.o
 obj-y	+= misc.o
 obj-y	+= reset_manager.o
 obj-y	+= timer.o
@@ -21,6 +20,7 @@ obj-y	+= reset_manager_gen5.o
 obj-y	+= scan_manager.o
 obj-y	+= system_manager_gen5.o
 obj-y	+= wrap_pll_config.o
+obj-y	+= fpga_manager.o
 endif
 
 ifdef CONFIG_TARGET_SOCFPGA_ARRIA10
diff --git a/arch/arm/mach-socfpga/include/mach/fpga_manager.h b/arch/arm/mach-socfpga/include/mach/fpga_manager.h
index a077e22..b046c2c 100644
--- a/arch/arm/mach-socfpga/include/mach/fpga_manager.h
+++ b/arch/arm/mach-socfpga/include/mach/fpga_manager.h
@@ -1,5 +1,5 @@
 /*
- * Copyright (C) 2012 Altera Corporation <www.altera.com>
+ * Copyright (C) 2012-2017 Altera Corporation <www.altera.com>
  * All rights reserved.
  *
  * SPDX-License-Identifier:    BSD-3-Clause
@@ -10,58 +10,9 @@
 
 #include <altera.h>
 
-struct socfpga_fpga_manager {
-	/* FPGA Manager Module */
-	u32	stat;			/* 0x00 */
-	u32	ctrl;
-	u32	dclkcnt;
-	u32	dclkstat;
-	u32	gpo;			/* 0x10 */
-	u32	gpi;
-	u32	misci;			/* 0x18 */
-	u32	_pad_0x1c_0x82c[517];
-
-	/* Configuration Monitor (MON) Registers */
-	u32	gpio_inten;		/* 0x830 */
-	u32	gpio_intmask;
-	u32	gpio_inttype_level;
-	u32	gpio_int_polarity;
-	u32	gpio_intstatus;		/* 0x840 */
-	u32	gpio_raw_intstatus;
-	u32	_pad_0x848;
-	u32	gpio_porta_eoi;
-	u32	gpio_ext_porta;		/* 0x850 */
-	u32	_pad_0x854_0x85c[3];
-	u32	gpio_1s_sync;		/* 0x860 */
-	u32	_pad_0x864_0x868[2];
-	u32	gpio_ver_id_code;
-	u32	gpio_config_reg2;	/* 0x870 */
-	u32	gpio_config_reg1;
-};
-
-#define FPGAMGRREGS_STAT_MODE_MASK		0x7
-#define FPGAMGRREGS_STAT_MSEL_MASK		0xf8
-#define FPGAMGRREGS_STAT_MSEL_LSB		3
-
-#define FPGAMGRREGS_CTRL_CFGWDTH_MASK		0x200
-#define FPGAMGRREGS_CTRL_AXICFGEN_MASK		0x100
-#define FPGAMGRREGS_CTRL_NCONFIGPULL_MASK	0x4
-#define FPGAMGRREGS_CTRL_NCE_MASK		0x2
-#define FPGAMGRREGS_CTRL_EN_MASK		0x1
-#define FPGAMGRREGS_CTRL_CDRATIO_LSB		6
-
-#define FPGAMGRREGS_MON_GPIO_EXT_PORTA_CRC_MASK	0x8
-#define FPGAMGRREGS_MON_GPIO_EXT_PORTA_ID_MASK	0x4
-#define FPGAMGRREGS_MON_GPIO_EXT_PORTA_CD_MASK	0x2
-#define FPGAMGRREGS_MON_GPIO_EXT_PORTA_NS_MASK	0x1
-
-/* FPGA Mode */
-#define FPGAMGRREGS_MODE_FPGAOFF		0x0
-#define FPGAMGRREGS_MODE_RESETPHASE		0x1
-#define FPGAMGRREGS_MODE_CFGPHASE		0x2
-#define FPGAMGRREGS_MODE_INITPHASE		0x3
-#define FPGAMGRREGS_MODE_USERMODE		0x4
-#define FPGAMGRREGS_MODE_UNKNOWN		0x5
+#if defined(CONFIG_TARGET_SOCFPGA_GEN5)
+#include <asm/arch/fpga_manager_gen5.h>
+#endif
 
 /* FPGA CD Ratio Value */
 #define CDRATIO_x1				0x0
@@ -69,9 +20,14 @@ struct socfpga_fpga_manager {
 #define CDRATIO_x4				0x2
 #define CDRATIO_x8				0x3
 
-/* SoCFPGA support functions */
-int fpgamgr_test_fpga_ready(void);
-int fpgamgr_poll_fpga_ready(void);
+#ifndef __ASSEMBLY__
+
+/* Common prototypes */
 int fpgamgr_get_mode(void);
+int fpgamgr_poll_fpga_ready(void);
+void fpgamgr_program_write(const void *rbf_data, size_t rbf_size);
+int fpgamgr_test_fpga_ready(void);
+int fpgamgr_dclkcnt_set(unsigned long cnt);
 
+#endif /* __ASSEMBLY__ */
 #endif /* _FPGA_MANAGER_H_ */
diff --git a/arch/arm/mach-socfpga/include/mach/fpga_manager.h b/arch/arm/mach-socfpga/include/mach/fpga_manager_gen5.h
similarity index 57%
copy from arch/arm/mach-socfpga/include/mach/fpga_manager.h
copy to arch/arm/mach-socfpga/include/mach/fpga_manager_gen5.h
index a077e22..2de7a11 100644
--- a/arch/arm/mach-socfpga/include/mach/fpga_manager.h
+++ b/arch/arm/mach-socfpga/include/mach/fpga_manager_gen5.h
@@ -1,14 +1,38 @@
 /*
- * Copyright (C) 2012 Altera Corporation <www.altera.com>
+ * Copyright (C) 2012-2017 Altera Corporation <www.altera.com>
  * All rights reserved.
  *
  * SPDX-License-Identifier:    BSD-3-Clause
  */
 
-#ifndef	_FPGA_MANAGER_H_
-#define	_FPGA_MANAGER_H_
+#ifndef _FPGA_MANAGER_GEN5_H_
+#define _FPGA_MANAGER_GEN5_H_
 
-#include <altera.h>
+#define FPGAMGRREGS_STAT_MODE_MASK		0x7
+#define FPGAMGRREGS_STAT_MSEL_MASK		0xf8
+#define FPGAMGRREGS_STAT_MSEL_LSB		3
+
+#define FPGAMGRREGS_CTRL_CFGWDTH_MASK		BIT(9)
+#define FPGAMGRREGS_CTRL_AXICFGEN_MASK		BIT(8)
+#define FPGAMGRREGS_CTRL_NCONFIGPULL_MASK	BIT(2)
+#define FPGAMGRREGS_CTRL_NCE_MASK		BIT(1)
+#define FPGAMGRREGS_CTRL_EN_MASK		BIT(0)
+#define FPGAMGRREGS_CTRL_CDRATIO_LSB		6
+
+#define FPGAMGRREGS_MON_GPIO_EXT_PORTA_CRC_MASK	BIT(3)
+#define FPGAMGRREGS_MON_GPIO_EXT_PORTA_ID_MASK	BIT(2)
+#define FPGAMGRREGS_MON_GPIO_EXT_PORTA_CD_MASK	BIT(1)
+#define FPGAMGRREGS_MON_GPIO_EXT_PORTA_NS_MASK	BIT(0)
+
+/* FPGA Mode */
+#define FPGAMGRREGS_MODE_FPGAOFF		0x0
+#define FPGAMGRREGS_MODE_RESETPHASE		0x1
+#define FPGAMGRREGS_MODE_CFGPHASE		0x2
+#define FPGAMGRREGS_MODE_INITPHASE		0x3
+#define FPGAMGRREGS_MODE_USERMODE		0x4
+#define FPGAMGRREGS_MODE_UNKNOWN		0x5
+
+#ifndef __ASSEMBLY__
 
 struct socfpga_fpga_manager {
 	/* FPGA Manager Module */
@@ -39,39 +63,6 @@ struct socfpga_fpga_manager {
 	u32	gpio_config_reg1;
 };
 
-#define FPGAMGRREGS_STAT_MODE_MASK		0x7
-#define FPGAMGRREGS_STAT_MSEL_MASK		0xf8
-#define FPGAMGRREGS_STAT_MSEL_LSB		3
-
-#define FPGAMGRREGS_CTRL_CFGWDTH_MASK		0x200
-#define FPGAMGRREGS_CTRL_AXICFGEN_MASK		0x100
-#define FPGAMGRREGS_CTRL_NCONFIGPULL_MASK	0x4
-#define FPGAMGRREGS_CTRL_NCE_MASK		0x2
-#define FPGAMGRREGS_CTRL_EN_MASK		0x1
-#define FPGAMGRREGS_CTRL_CDRATIO_LSB		6
-
-#define FPGAMGRREGS_MON_GPIO_EXT_PORTA_CRC_MASK	0x8
-#define FPGAMGRREGS_MON_GPIO_EXT_PORTA_ID_MASK	0x4
-#define FPGAMGRREGS_MON_GPIO_EXT_PORTA_CD_MASK	0x2
-#define FPGAMGRREGS_MON_GPIO_EXT_PORTA_NS_MASK	0x1
-
-/* FPGA Mode */
-#define FPGAMGRREGS_MODE_FPGAOFF		0x0
-#define FPGAMGRREGS_MODE_RESETPHASE		0x1
-#define FPGAMGRREGS_MODE_CFGPHASE		0x2
-#define FPGAMGRREGS_MODE_INITPHASE		0x3
-#define FPGAMGRREGS_MODE_USERMODE		0x4
-#define FPGAMGRREGS_MODE_UNKNOWN		0x5
-
-/* FPGA CD Ratio Value */
-#define CDRATIO_x1				0x0
-#define CDRATIO_x2				0x1
-#define CDRATIO_x4				0x2
-#define CDRATIO_x8				0x3
-
-/* SoCFPGA support functions */
-int fpgamgr_test_fpga_ready(void);
-int fpgamgr_poll_fpga_ready(void);
-int fpgamgr_get_mode(void);
+#endif /* __ASSEMBLY__ */
 
-#endif /* _FPGA_MANAGER_H_ */
+#endif /* _FPGA_MANAGER_GEN5_H_ */
diff --git a/drivers/fpga/Makefile b/drivers/fpga/Makefile
index 777706f..b65e5ba 100644
--- a/drivers/fpga/Makefile
+++ b/drivers/fpga/Makefile
@@ -20,4 +20,5 @@ obj-$(CONFIG_FPGA_CYCLON2) += cyclon2.o
 obj-$(CONFIG_FPGA_STRATIX_II) += stratixII.o
 obj-$(CONFIG_FPGA_STRATIX_V) += stratixv.o
 obj-$(CONFIG_FPGA_SOCFPGA) += socfpga.o
+obj-$(CONFIG_TARGET_SOCFPGA_GEN5) += socfpga_gen5.o
 endif
diff --git a/drivers/fpga/socfpga.c b/drivers/fpga/socfpga.c
index f1b2f2c..5200de7 100644
--- a/drivers/fpga/socfpga.c
+++ b/drivers/fpga/socfpga.c
@@ -14,23 +14,12 @@
 
 DECLARE_GLOBAL_DATA_PTR;
 
-/* Timeout count */
-#define FPGA_TIMEOUT_CNT		0x1000000
+#define FPGA_TIMEOUT_CNT	0x1000000
 
 static struct socfpga_fpga_manager *fpgamgr_regs =
 	(struct socfpga_fpga_manager *)SOCFPGA_FPGAMGRREGS_ADDRESS;
-static struct socfpga_system_manager *sysmgr_regs =
-	(struct socfpga_system_manager *)SOCFPGA_SYSMGR_ADDRESS;
 
-/* Set CD ratio */
-static void fpgamgr_set_cd_ratio(unsigned long ratio)
-{
-	clrsetbits_le32(&fpgamgr_regs->ctrl,
-			0x3 << FPGAMGRREGS_CTRL_CDRATIO_LSB,
-			(ratio & 0x3) << FPGAMGRREGS_CTRL_CDRATIO_LSB);
-}
-
-static int fpgamgr_dclkcnt_set(unsigned long cnt)
+int fpgamgr_dclkcnt_set(unsigned long cnt)
 {
 	unsigned long i;
 
@@ -53,98 +42,8 @@ static int fpgamgr_dclkcnt_set(unsigned long cnt)
 	return -ETIMEDOUT;
 }
 
-/* Start the FPGA programming by initialize the FPGA Manager */
-static int fpgamgr_program_init(void)
-{
-	unsigned long msel, i;
-
-	/* Get the MSEL value */
-	msel = readl(&fpgamgr_regs->stat);
-	msel &= FPGAMGRREGS_STAT_MSEL_MASK;
-	msel >>= FPGAMGRREGS_STAT_MSEL_LSB;
-
-	/*
-	 * Set the cfg width
-	 * If MSEL[3] = 1, cfg width = 32 bit
-	 */
-	if (msel & 0x8) {
-		setbits_le32(&fpgamgr_regs->ctrl,
-			     FPGAMGRREGS_CTRL_CFGWDTH_MASK);
-
-		/* To determine the CD ratio */
-		/* MSEL[1:0] = 0, CD Ratio = 1 */
-		if ((msel & 0x3) == 0x0)
-			fpgamgr_set_cd_ratio(CDRATIO_x1);
-		/* MSEL[1:0] = 1, CD Ratio = 4 */
-		else if ((msel & 0x3) == 0x1)
-			fpgamgr_set_cd_ratio(CDRATIO_x4);
-		/* MSEL[1:0] = 2, CD Ratio = 8 */
-		else if ((msel & 0x3) == 0x2)
-			fpgamgr_set_cd_ratio(CDRATIO_x8);
-
-	} else {	/* MSEL[3] = 0 */
-		clrbits_le32(&fpgamgr_regs->ctrl,
-			     FPGAMGRREGS_CTRL_CFGWDTH_MASK);
-
-		/* To determine the CD ratio */
-		/* MSEL[1:0] = 0, CD Ratio = 1 */
-		if ((msel & 0x3) == 0x0)
-			fpgamgr_set_cd_ratio(CDRATIO_x1);
-		/* MSEL[1:0] = 1, CD Ratio = 2 */
-		else if ((msel & 0x3) == 0x1)
-			fpgamgr_set_cd_ratio(CDRATIO_x2);
-		/* MSEL[1:0] = 2, CD Ratio = 4 */
-		else if ((msel & 0x3) == 0x2)
-			fpgamgr_set_cd_ratio(CDRATIO_x4);
-	}
-
-	/* To enable FPGA Manager configuration */
-	clrbits_le32(&fpgamgr_regs->ctrl, FPGAMGRREGS_CTRL_NCE_MASK);
-
-	/* To enable FPGA Manager drive over configuration line */
-	setbits_le32(&fpgamgr_regs->ctrl, FPGAMGRREGS_CTRL_EN_MASK);
-
-	/* Put FPGA into reset phase */
-	setbits_le32(&fpgamgr_regs->ctrl, FPGAMGRREGS_CTRL_NCONFIGPULL_MASK);
-
-	/* (1) wait until FPGA enter reset phase */
-	for (i = 0; i < FPGA_TIMEOUT_CNT; i++) {
-		if (fpgamgr_get_mode() == FPGAMGRREGS_MODE_RESETPHASE)
-			break;
-	}
-
-	/* If not in reset state, return error */
-	if (fpgamgr_get_mode() != FPGAMGRREGS_MODE_RESETPHASE) {
-		puts("FPGA: Could not reset\n");
-		return -1;
-	}
-
-	/* Release FPGA from reset phase */
-	clrbits_le32(&fpgamgr_regs->ctrl, FPGAMGRREGS_CTRL_NCONFIGPULL_MASK);
-
-	/* (2) wait until FPGA enter configuration phase */
-	for (i = 0; i < FPGA_TIMEOUT_CNT; i++) {
-		if (fpgamgr_get_mode() == FPGAMGRREGS_MODE_CFGPHASE)
-			break;
-	}
-
-	/* If not in configuration state, return error */
-	if (fpgamgr_get_mode() != FPGAMGRREGS_MODE_CFGPHASE) {
-		puts("FPGA: Could not configure\n");
-		return -2;
-	}
-
-	/* Clear all interrupts in CB Monitor */
-	writel(0xFFF, &fpgamgr_regs->gpio_porta_eoi);
-
-	/* Enable AXI configuration */
-	setbits_le32(&fpgamgr_regs->ctrl, FPGAMGRREGS_CTRL_AXICFGEN_MASK);
-
-	return 0;
-}
-
 /* Write the RBF data to FPGA Manager */
-static void fpgamgr_program_write(const void *rbf_data, unsigned long rbf_size)
+void fpgamgr_program_write(const void *rbf_data, size_t rbf_size)
 {
 	uint32_t src = (uint32_t)rbf_data;
 	uint32_t dst = SOCFPGA_FPGAMGRDATA_ADDRESS;
@@ -169,136 +68,4 @@ static void fpgamgr_program_write(const void *rbf_data, unsigned long rbf_size)
 		"3:	nop\n"
 		: "+r"(src), "+r"(dst), "+r"(loops32), "+r"(loops4) :
 		: "r0", "r1", "r2", "r3", "r4", "r5", "r6", "r7", "cc");
-}
-
-/* Ensure the FPGA entering config done */
-static int fpgamgr_program_poll_cd(void)
-{
-	const uint32_t mask = FPGAMGRREGS_MON_GPIO_EXT_PORTA_NS_MASK |
-			      FPGAMGRREGS_MON_GPIO_EXT_PORTA_CD_MASK;
-	unsigned long reg, i;
-
-	/* (3) wait until full config done */
-	for (i = 0; i < FPGA_TIMEOUT_CNT; i++) {
-		reg = readl(&fpgamgr_regs->gpio_ext_porta);
-
-		/* Config error */
-		if (!(reg & mask)) {
-			printf("FPGA: Configuration error.\n");
-			return -3;
-		}
-
-		/* Config done without error */
-		if (reg & mask)
-			break;
-	}
-
-	/* Timeout happened, return error */
-	if (i == FPGA_TIMEOUT_CNT) {
-		printf("FPGA: Timeout waiting for program.\n");
-		return -4;
-	}
-
-	/* Disable AXI configuration */
-	clrbits_le32(&fpgamgr_regs->ctrl, FPGAMGRREGS_CTRL_AXICFGEN_MASK);
-
-	return 0;
-}
-
-/* Ensure the FPGA entering init phase */
-static int fpgamgr_program_poll_initphase(void)
-{
-	unsigned long i;
-
-	/* Additional clocks for the CB to enter initialization phase */
-	if (fpgamgr_dclkcnt_set(0x4))
-		return -5;
-
-	/* (4) wait until FPGA enter init phase or user mode */
-	for (i = 0; i < FPGA_TIMEOUT_CNT; i++) {
-		if (fpgamgr_get_mode() == FPGAMGRREGS_MODE_INITPHASE)
-			break;
-		if (fpgamgr_get_mode() == FPGAMGRREGS_MODE_USERMODE)
-			break;
-	}
-
-	/* If not in configuration state, return error */
-	if (i == FPGA_TIMEOUT_CNT)
-		return -6;
-
-	return 0;
-}
-
-/* Ensure the FPGA entering user mode */
-static int fpgamgr_program_poll_usermode(void)
-{
-	unsigned long i;
-
-	/* Additional clocks for the CB to exit initialization phase */
-	if (fpgamgr_dclkcnt_set(0x5000))
-		return -7;
-
-	/* (5) wait until FPGA enter user mode */
-	for (i = 0; i < FPGA_TIMEOUT_CNT; i++) {
-		if (fpgamgr_get_mode() == FPGAMGRREGS_MODE_USERMODE)
-			break;
-	}
-	/* If not in configuration state, return error */
-	if (i == FPGA_TIMEOUT_CNT)
-		return -8;
-
-	/* To release FPGA Manager drive over configuration line */
-	clrbits_le32(&fpgamgr_regs->ctrl, FPGAMGRREGS_CTRL_EN_MASK);
-
-	return 0;
-}
-
-/*
- * FPGA Manager to program the FPGA. This is the interface used by FPGA driver.
- * Return 0 for sucess, non-zero for error.
- */
-int socfpga_load(Altera_desc *desc, const void *rbf_data, size_t rbf_size)
-{
-	unsigned long status;
-
-	if ((uint32_t)rbf_data & 0x3) {
-		puts("FPGA: Unaligned data, realign to 32bit boundary.\n");
-		return -EINVAL;
-	}
-
-	/* Prior programming the FPGA, all bridges need to be shut off */
-
-	/* Disable all signals from hps peripheral controller to fpga */
-	writel(0, &sysmgr_regs->fpgaintfgrp_module);
-
-	/* Disable all signals from FPGA to HPS SDRAM */
-#define SDR_CTRLGRP_FPGAPORTRST_ADDRESS	0x5080
-	writel(0, SOCFPGA_SDR_ADDRESS + SDR_CTRLGRP_FPGAPORTRST_ADDRESS);
-
-	/* Disable all axi bridge (hps2fpga, lwhps2fpga & fpga2hps) */
-	socfpga_bridges_reset(1);
-
-	/* Unmap the bridges from NIC-301 */
-	writel(0x1, SOCFPGA_L3REGS_ADDRESS);
-
-	/* Initialize the FPGA Manager */
-	status = fpgamgr_program_init();
-	if (status)
-		return status;
-
-	/* Write the RBF data to FPGA Manager */
-	fpgamgr_program_write(rbf_data, rbf_size);
-
-	/* Ensure the FPGA entering config done */
-	status = fpgamgr_program_poll_cd();
-	if (status)
-		return status;
-
-	/* Ensure the FPGA entering init phase */
-	status = fpgamgr_program_poll_initphase();
-	if (status)
-		return status;
-
-	/* Ensure the FPGA entering user mode */
-	return fpgamgr_program_poll_usermode();
-}
+}
\ No newline at end of file
diff --git a/drivers/fpga/socfpga.c b/drivers/fpga/socfpga_gen5.c
similarity index 83%
copy from drivers/fpga/socfpga.c
copy to drivers/fpga/socfpga_gen5.c
index f1b2f2c..3dfb030 100644
--- a/drivers/fpga/socfpga.c
+++ b/drivers/fpga/socfpga_gen5.c
@@ -14,8 +14,7 @@
 
 DECLARE_GLOBAL_DATA_PTR;
 
-/* Timeout count */
-#define FPGA_TIMEOUT_CNT		0x1000000
+#define FPGA_TIMEOUT_CNT	0x1000000
 
 static struct socfpga_fpga_manager *fpgamgr_regs =
 	(struct socfpga_fpga_manager *)SOCFPGA_FPGAMGRREGS_ADDRESS;
@@ -30,29 +29,6 @@ static void fpgamgr_set_cd_ratio(unsigned long ratio)
 			(ratio & 0x3) << FPGAMGRREGS_CTRL_CDRATIO_LSB);
 }
 
-static int fpgamgr_dclkcnt_set(unsigned long cnt)
-{
-	unsigned long i;
-
-	/* Clear any existing done status */
-	if (readl(&fpgamgr_regs->dclkstat))
-		writel(0x1, &fpgamgr_regs->dclkstat);
-
-	/* Write the dclkcnt */
-	writel(cnt, &fpgamgr_regs->dclkcnt);
-
-	/* Wait till the dclkcnt done */
-	for (i = 0; i < FPGA_TIMEOUT_CNT; i++) {
-		if (!readl(&fpgamgr_regs->dclkstat))
-			continue;
-
-		writel(0x1, &fpgamgr_regs->dclkstat);
-		return 0;
-	}
-
-	return -ETIMEDOUT;
-}
-
 /* Start the FPGA programming by initialize the FPGA Manager */
 static int fpgamgr_program_init(void)
 {
@@ -143,34 +119,6 @@ static int fpgamgr_program_init(void)
 	return 0;
 }
 
-/* Write the RBF data to FPGA Manager */
-static void fpgamgr_program_write(const void *rbf_data, unsigned long rbf_size)
-{
-	uint32_t src = (uint32_t)rbf_data;
-	uint32_t dst = SOCFPGA_FPGAMGRDATA_ADDRESS;
-
-	/* Number of loops for 32-byte long copying. */
-	uint32_t loops32 = rbf_size / 32;
-	/* Number of loops for 4-byte long copying + trailing bytes */
-	uint32_t loops4 = DIV_ROUND_UP(rbf_size % 32, 4);
-
-	asm volatile(
-		"1:	ldmia	%0!,	{r0-r7}\n"
-		"	stmia	%1!,	{r0-r7}\n"
-		"	sub	%1,	#32\n"
-		"	subs	%2,	#1\n"
-		"	bne	1b\n"
-		"	cmp	%3,	#0\n"
-		"	beq	3f\n"
-		"2:	ldr	%2,	[%0],	#4\n"
-		"	str	%2,	[%1]\n"
-		"	subs	%3,	#1\n"
-		"	bne	2b\n"
-		"3:	nop\n"
-		: "+r"(src), "+r"(dst), "+r"(loops32), "+r"(loops4) :
-		: "r0", "r1", "r2", "r3", "r4", "r5", "r6", "r7", "cc");
-}
-
 /* Ensure the FPGA entering config done */
 static int fpgamgr_program_poll_cd(void)
 {
-- 
2.2.0

[U-Boot] [PATCH v7 3/6] arm: socfpga: Enable FPGA driver on SPL

[tien.fong.chee at intel.com]

From: Tien Fong Chee <tien.fong.chee@intel.com>

This patch is for enabling the FPGA driver support on SPL.

Signed-off-by: Tien Fong Chee <tien.fong.chee@intel.com>
---
 include/configs/socfpga_common.h | 1 +
 1 file changed, 1 insertion(+)

diff --git a/include/configs/socfpga_common.h b/include/configs/socfpga_common.h
index da7e4ad..e74e7eb 100644
--- a/include/configs/socfpga_common.h
+++ b/include/configs/socfpga_common.h
@@ -110,6 +110,7 @@
 #define CONFIG_FPGA
 #define CONFIG_FPGA_ALTERA
 #define CONFIG_FPGA_SOCFPGA
+#define CONFIG_SPL_FPGA_SUPPORT
 #define CONFIG_FPGA_COUNT		1
 #endif
 #endif
-- 
2.2.0

[U-Boot] [PATCH v7 3/6] arm: socfpga: Enable FPGA driver on SPL

[Marek Vasut]

On 05/29/2017 06:00 AM, tien.fong.chee at intel.com wrote:
> From: Tien Fong Chee <tien.fong.chee@intel.com>
> 
> This patch is for enabling the FPGA driver support on SPL.
> 
> Signed-off-by: Tien Fong Chee <tien.fong.chee@intel.com>
> ---
>  include/configs/socfpga_common.h | 1 +
>  1 file changed, 1 insertion(+)
> 
> diff --git a/include/configs/socfpga_common.h b/include/configs/socfpga_common.h
> index da7e4ad..e74e7eb 100644
> --- a/include/configs/socfpga_common.h
> +++ b/include/configs/socfpga_common.h
> @@ -110,6 +110,7 @@
>  #define CONFIG_FPGA
>  #define CONFIG_FPGA_ALTERA
>  #define CONFIG_FPGA_SOCFPGA
> +#define CONFIG_SPL_FPGA_SUPPORT

This should be Kconfig symbol selected in board config. Why is it not
Kconfig symbol ?

>  #define CONFIG_FPGA_COUNT		1
>  #endif
>  #endif
> 


-- 
Best regards,
Marek Vasut

[U-Boot] [PATCH v7 3/6] arm: socfpga: Enable FPGA driver on SPL

[Chee, Tien Fong]

On Sab, 2017-06-03 at 13:27 +0200, Marek Vasut wrote:
> On 05/29/2017 06:00 AM, tien.fong.chee at intel.com wrote:
> > 
> > From: Tien Fong Chee <tien.fong.chee@intel.com>
> > 
> > This patch is for enabling the FPGA driver support on SPL.
> > 
> > Signed-off-by: Tien Fong Chee <tien.fong.chee@intel.com>
> > ---
> >  include/configs/socfpga_common.h | 1 +
> >  1 file changed, 1 insertion(+)
> > 
> > diff --git a/include/configs/socfpga_common.h
> > b/include/configs/socfpga_common.h
> > index da7e4ad..e74e7eb 100644
> > --- a/include/configs/socfpga_common.h
> > +++ b/include/configs/socfpga_common.h
> > @@ -110,6 +110,7 @@
> >  #define CONFIG_FPGA
> >  #define CONFIG_FPGA_ALTERA
> >  #define CONFIG_FPGA_SOCFPGA
> > +#define CONFIG_SPL_FPGA_SUPPORT
> This should be Kconfig symbol selected in board config. Why is it not
> Kconfig symbol ?
> 
I have a patch that is specific for converting all FPGA related Macro
config by tool created which will be submited after this patch set.
Let me know if you prefer kconfig symbol.
> > 
> >  #define CONFIG_FPGA_COUNT		1
> >  #endif
> >  #endif
> > 
> 

[U-Boot] [PATCH v7 3/6] arm: socfpga: Enable FPGA driver on SPL

[Chee, Tien Fong]

On Isn, 2017-06-05 at 11:32 +0800, Chee, Tien Fong wrote:
> > > 
> > 
> On Sab, 2017-06-03 at 13:27 +0200, Marek Vasut wrote:
> > 
> > On 05/29/2017 06:00 AM, tien.fong.chee at intel.com wrote:
> > > 
> > > 
> > > From: Tien Fong Chee <tien.fong.chee@intel.com>
> > > 
> > > This patch is for enabling the FPGA driver support on SPL.
> > > 
> > > Signed-off-by: Tien Fong Chee <tien.fong.chee@intel.com>
> > > ---
> > >  include/configs/socfpga_common.h | 1 +
> > >  1 file changed, 1 insertion(+)
> > > 
> > > diff --git a/include/configs/socfpga_common.h
> > > b/include/configs/socfpga_common.h
> > > index da7e4ad..e74e7eb 100644
> > > --- a/include/configs/socfpga_common.h
> > > +++ b/include/configs/socfpga_common.h
> > > @@ -110,6 +110,7 @@
> > >  #define CONFIG_FPGA
> > >  #define CONFIG_FPGA_ALTERA
> > >  #define CONFIG_FPGA_SOCFPGA
> > > +#define CONFIG_SPL_FPGA_SUPPORT
> > This should be Kconfig symbol selected in board config. Why is it
> > not
> > Kconfig symbol ?
> > 
Ahha....ijust recalled there is a very important reason i did this
because CONFIG_CMD_FPGA which is wrapping all these FPGA related CONFIG
is not part of kconfig. During the build, kconfig and Macro #define are
in two different phase/order, so we might having build issue during
kconfig build(1st phase) when some Macro #define which is 2nd phase are
required.

> I have a patch that is specific for converting all FPGA related Macro
> config by tool created which will be submited after this patch set.
> Let me know if you prefer kconfig symbol.
> > > 
> > >  #define CONFIG_FPGA_COUNT		1
> > >  #endif
> > >  #endif
> > > 

[U-Boot] [PATCH v7 3/6] arm: socfpga: Enable FPGA driver on SPL

[Marek Vasut]

On 06/05/2017 06:02 AM, Chee, Tien Fong wrote:
> On Isn, 2017-06-05 at 11:32 +0800, Chee, Tien Fong wrote:
>>>>
>>>
>> On Sab, 2017-06-03 at 13:27 +0200, Marek Vasut wrote:
>>>
>>> On 05/29/2017 06:00 AM, tien.fong.chee at intel.com wrote:
>>>>
>>>>
>>>> From: Tien Fong Chee <tien.fong.chee@intel.com>
>>>>
>>>> This patch is for enabling the FPGA driver support on SPL.
>>>>
>>>> Signed-off-by: Tien Fong Chee <tien.fong.chee@intel.com>
>>>> ---
>>>>  include/configs/socfpga_common.h | 1 +
>>>>  1 file changed, 1 insertion(+)
>>>>
>>>> diff --git a/include/configs/socfpga_common.h
>>>> b/include/configs/socfpga_common.h
>>>> index da7e4ad..e74e7eb 100644
>>>> --- a/include/configs/socfpga_common.h
>>>> +++ b/include/configs/socfpga_common.h
>>>> @@ -110,6 +110,7 @@
>>>>  #define CONFIG_FPGA
>>>>  #define CONFIG_FPGA_ALTERA
>>>>  #define CONFIG_FPGA_SOCFPGA
>>>> +#define CONFIG_SPL_FPGA_SUPPORT
>>> This should be Kconfig symbol selected in board config. Why is it
>>> not
>>> Kconfig symbol ?
>>>
> Ahha....ijust recalled there is a very important reason i did this
> because CONFIG_CMD_FPGA which is wrapping all these FPGA related CONFIG
> is not part of kconfig.

it is, so this is nonsense, try git grep next time ...
cmd/Kconfig:config CMD_FPGA

> During the build, kconfig and Macro #define are
> in two different phase/order, so we might having build issue during
> kconfig build(1st phase) when some Macro #define which is 2nd phase are
> required.

I don't understand this, but I think this is bogus.

>> I have a patch that is specific for converting all FPGA related Macro
>> config by tool created which will be submited after this patch set.
>> Let me know if you prefer kconfig symbol.
>>>>
>>>>  #define CONFIG_FPGA_COUNT		1
>>>>  #endif
>>>>  #endif


-- 
Best regards,
Marek Vasut

[U-Boot] [PATCH v7 3/6] arm: socfpga: Enable FPGA driver on SPL

[Chee, Tien Fong]

On Isn, 2017-06-05 at 13:24 +0200, Marek Vasut wrote:
> On 06/05/2017 06:02 AM, Chee, Tien Fong wrote:
> > 
> > On Isn, 2017-06-05 at 11:32 +0800, Chee, Tien Fong wrote:
> > > 
> > > > 
> > > > > 
> > > > > 
> > > On Sab, 2017-06-03 at 13:27 +0200, Marek Vasut wrote:
> > > > 
> > > > 
> > > > On 05/29/2017 06:00 AM, tien.fong.chee at intel.com wrote:
> > > > > 
> > > > > 
> > > > > 
> > > > > From: Tien Fong Chee <tien.fong.chee@intel.com>
> > > > > 
> > > > > This patch is for enabling the FPGA driver support on SPL.
> > > > > 
> > > > > Signed-off-by: Tien Fong Chee <tien.fong.chee@intel.com>
> > > > > ---
> > > > >  include/configs/socfpga_common.h | 1 +
> > > > >  1 file changed, 1 insertion(+)
> > > > > 
> > > > > diff --git a/include/configs/socfpga_common.h
> > > > > b/include/configs/socfpga_common.h
> > > > > index da7e4ad..e74e7eb 100644
> > > > > --- a/include/configs/socfpga_common.h
> > > > > +++ b/include/configs/socfpga_common.h
> > > > > @@ -110,6 +110,7 @@
> > > > >  #define CONFIG_FPGA
> > > > >  #define CONFIG_FPGA_ALTERA
> > > > >  #define CONFIG_FPGA_SOCFPGA
> > > > > +#define CONFIG_SPL_FPGA_SUPPORT
> > > > This should be Kconfig symbol selected in board config. Why is
> > > > it
> > > > not
> > > > Kconfig symbol ?
> > > > 
> > Ahha....ijust recalled there is a very important reason i did this
> > because CONFIG_CMD_FPGA which is wrapping all these FPGA related
> > CONFIG
> > is not part of kconfig.
> it is, so this is nonsense, try git grep next time ...
> cmd/Kconfig:config CMD_FPGA
> 
> > 
> > During the build, kconfig and Macro #define are
> > in two different phase/order, so we might having build issue during
> > kconfig build(1st phase) when some Macro #define which is 2nd phase
> > are
> > required.
> I don't understand this, but I think this is bogus.
> 
Okay. For example, CONFIG_A in Kconfig depend on CONFIG_B which is
defined in socfpga_common.h. When SPL build, CONFIG_A would not be set
to one even CONFIG_B is defined to one in header file, because at that
moment build, CONFIG_B is not detected, but header file only get build
after Kconfig build done.
> > 
> > > 
> > > I have a patch that is specific for converting all FPGA related
> > > Macro
> > > config by tool created which will be submited after this patch
> > > set.
> > > Let me know if you prefer kconfig symbol.
> > > > 
> > > > > 
> > > > > 
> > > > >  #define CONFIG_FPGA_COUNT		1
> > > > >  #endif
> > > > >  #endif
> 

[U-Boot] [PATCH v7 3/6] arm: socfpga: Enable FPGA driver on SPL

[Marek Vasut]

On 06/05/2017 02:06 PM, Chee, Tien Fong wrote:
> On Isn, 2017-06-05 at 13:24 +0200, Marek Vasut wrote:
>> On 06/05/2017 06:02 AM, Chee, Tien Fong wrote:
>>>
>>> On Isn, 2017-06-05 at 11:32 +0800, Chee, Tien Fong wrote:
>>>>
>>>>>
>>>>>>
>>>>>>
>>>> On Sab, 2017-06-03 at 13:27 +0200, Marek Vasut wrote:
>>>>>
>>>>>
>>>>> On 05/29/2017 06:00 AM, tien.fong.chee at intel.com wrote:
>>>>>>
>>>>>>
>>>>>>
>>>>>> From: Tien Fong Chee <tien.fong.chee@intel.com>
>>>>>>
>>>>>> This patch is for enabling the FPGA driver support on SPL.
>>>>>>
>>>>>> Signed-off-by: Tien Fong Chee <tien.fong.chee@intel.com>
>>>>>> ---
>>>>>>  include/configs/socfpga_common.h | 1 +
>>>>>>  1 file changed, 1 insertion(+)
>>>>>>
>>>>>> diff --git a/include/configs/socfpga_common.h
>>>>>> b/include/configs/socfpga_common.h
>>>>>> index da7e4ad..e74e7eb 100644
>>>>>> --- a/include/configs/socfpga_common.h
>>>>>> +++ b/include/configs/socfpga_common.h
>>>>>> @@ -110,6 +110,7 @@
>>>>>>  #define CONFIG_FPGA
>>>>>>  #define CONFIG_FPGA_ALTERA
>>>>>>  #define CONFIG_FPGA_SOCFPGA
>>>>>> +#define CONFIG_SPL_FPGA_SUPPORT
>>>>> This should be Kconfig symbol selected in board config. Why is
>>>>> it
>>>>> not
>>>>> Kconfig symbol ?
>>>>>
>>> Ahha....ijust recalled there is a very important reason i did this
>>> because CONFIG_CMD_FPGA which is wrapping all these FPGA related
>>> CONFIG
>>> is not part of kconfig.
>> it is, so this is nonsense, try git grep next time ...
>> cmd/Kconfig:config CMD_FPGA
>>
>>>
>>> During the build, kconfig and Macro #define are
>>> in two different phase/order, so we might having build issue during
>>> kconfig build(1st phase) when some Macro #define which is 2nd phase
>>> are
>>> required.
>> I don't understand this, but I think this is bogus.
>>
> Okay. For example, CONFIG_A in Kconfig depend on CONFIG_B which is
> defined in socfpga_common.h. When SPL build, CONFIG_A would not be set
> to one even CONFIG_B is defined to one in header file, because at that
> moment build, CONFIG_B is not detected, but header file only get build
> after Kconfig build done.

Then convert whatever is missing to Kconfig and it's done ?

-- 
Best regards,
Marek Vasut

[U-Boot] [PATCH v7 3/6] arm: socfpga: Enable FPGA driver on SPL

[Chee, Tien Fong]

On Isn, 2017-06-05 at 14:08 +0200, Marek Vasut wrote:
> On 06/05/2017 02:06 PM, Chee, Tien Fong wrote:
> > 
> > On Isn, 2017-06-05 at 13:24 +0200, Marek Vasut wrote:
> > > 
> > > On 06/05/2017 06:02 AM, Chee, Tien Fong wrote:
> > > > 
> > > > 
> > > > On Isn, 2017-06-05 at 11:32 +0800, Chee, Tien Fong wrote:
> > > > > 
> > > > > 
> > > > > > 
> > > > > > 
> > > > > > > 
> > > > > > > 
> > > > > > > 
> > > > > On Sab, 2017-06-03 at 13:27 +0200, Marek Vasut wrote:
> > > > > > 
> > > > > > 
> > > > > > 
> > > > > > On 05/29/2017 06:00 AM, tien.fong.chee at intel.com wrote:
> > > > > > > 
> > > > > > > 
> > > > > > > 
> > > > > > > 
> > > > > > > From: Tien Fong Chee <tien.fong.chee@intel.com>
> > > > > > > 
> > > > > > > This patch is for enabling the FPGA driver support on
> > > > > > > SPL.
> > > > > > > 
> > > > > > > Signed-off-by: Tien Fong Chee <tien.fong.chee@intel.com>
> > > > > > > ---
> > > > > > >  include/configs/socfpga_common.h | 1 +
> > > > > > >  1 file changed, 1 insertion(+)
> > > > > > > 
> > > > > > > diff --git a/include/configs/socfpga_common.h
> > > > > > > b/include/configs/socfpga_common.h
> > > > > > > index da7e4ad..e74e7eb 100644
> > > > > > > --- a/include/configs/socfpga_common.h
> > > > > > > +++ b/include/configs/socfpga_common.h
> > > > > > > @@ -110,6 +110,7 @@
> > > > > > >  #define CONFIG_FPGA
> > > > > > >  #define CONFIG_FPGA_ALTERA
> > > > > > >  #define CONFIG_FPGA_SOCFPGA
> > > > > > > +#define CONFIG_SPL_FPGA_SUPPORT
> > > > > > This should be Kconfig symbol selected in board config. Why
> > > > > > is
> > > > > > it
> > > > > > not
> > > > > > Kconfig symbol ?
> > > > > > 
> > > > Ahha....ijust recalled there is a very important reason i did
> > > > this
> > > > because CONFIG_CMD_FPGA which is wrapping all these FPGA
> > > > related
> > > > CONFIG
> > > > is not part of kconfig.
> > > it is, so this is nonsense, try git grep next time ...
> > > cmd/Kconfig:config CMD_FPGA
> > > 
> > > > 
> > > > 
> > > > During the build, kconfig and Macro #define are
> > > > in two different phase/order, so we might having build issue
> > > > during
> > > > kconfig build(1st phase) when some Macro #define which is 2nd
> > > > phase
> > > > are
> > > > required.
> > > I don't understand this, but I think this is bogus.
> > > 
> > Okay. For example, CONFIG_A in Kconfig depend on CONFIG_B which is
> > defined in socfpga_common.h. When SPL build, CONFIG_A would not be
> > set
> > to one even CONFIG_B is defined to one in header file, because at
> > that
> > moment build, CONFIG_B is not detected, but header file only get
> > build
> > after Kconfig build done.
> Then convert whatever is missing to Kconfig and it's done ?
> 
Yeah, i will send out immediately after this patch set.

[U-Boot] [PATCH v7 3/6] arm: socfpga: Enable FPGA driver on SPL

[Marek Vasut]

On 06/05/2017 02:11 PM, Chee, Tien Fong wrote:
> On Isn, 2017-06-05 at 14:08 +0200, Marek Vasut wrote:
>> On 06/05/2017 02:06 PM, Chee, Tien Fong wrote:
>>>
>>> On Isn, 2017-06-05 at 13:24 +0200, Marek Vasut wrote:
>>>>
>>>> On 06/05/2017 06:02 AM, Chee, Tien Fong wrote:
>>>>>
>>>>>
>>>>> On Isn, 2017-06-05 at 11:32 +0800, Chee, Tien Fong wrote:
>>>>>>
>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>> On Sab, 2017-06-03 at 13:27 +0200, Marek Vasut wrote:
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> On 05/29/2017 06:00 AM, tien.fong.chee at intel.com wrote:
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>> From: Tien Fong Chee <tien.fong.chee@intel.com>
>>>>>>>>
>>>>>>>> This patch is for enabling the FPGA driver support on
>>>>>>>> SPL.
>>>>>>>>
>>>>>>>> Signed-off-by: Tien Fong Chee <tien.fong.chee@intel.com>
>>>>>>>> ---
>>>>>>>>  include/configs/socfpga_common.h | 1 +
>>>>>>>>  1 file changed, 1 insertion(+)
>>>>>>>>
>>>>>>>> diff --git a/include/configs/socfpga_common.h
>>>>>>>> b/include/configs/socfpga_common.h
>>>>>>>> index da7e4ad..e74e7eb 100644
>>>>>>>> --- a/include/configs/socfpga_common.h
>>>>>>>> +++ b/include/configs/socfpga_common.h
>>>>>>>> @@ -110,6 +110,7 @@
>>>>>>>>  #define CONFIG_FPGA
>>>>>>>>  #define CONFIG_FPGA_ALTERA
>>>>>>>>  #define CONFIG_FPGA_SOCFPGA
>>>>>>>> +#define CONFIG_SPL_FPGA_SUPPORT
>>>>>>> This should be Kconfig symbol selected in board config. Why
>>>>>>> is
>>>>>>> it
>>>>>>> not
>>>>>>> Kconfig symbol ?
>>>>>>>
>>>>> Ahha....ijust recalled there is a very important reason i did
>>>>> this
>>>>> because CONFIG_CMD_FPGA which is wrapping all these FPGA
>>>>> related
>>>>> CONFIG
>>>>> is not part of kconfig.
>>>> it is, so this is nonsense, try git grep next time ...
>>>> cmd/Kconfig:config CMD_FPGA
>>>>
>>>>>
>>>>>
>>>>> During the build, kconfig and Macro #define are
>>>>> in two different phase/order, so we might having build issue
>>>>> during
>>>>> kconfig build(1st phase) when some Macro #define which is 2nd
>>>>> phase
>>>>> are
>>>>> required.
>>>> I don't understand this, but I think this is bogus.
>>>>
>>> Okay. For example, CONFIG_A in Kconfig depend on CONFIG_B which is
>>> defined in socfpga_common.h. When SPL build, CONFIG_A would not be
>>> set
>>> to one even CONFIG_B is defined to one in header file, because at
>>> that
>>> moment build, CONFIG_B is not detected, but header file only get
>>> build
>>> after Kconfig build done.
>> Then convert whatever is missing to Kconfig and it's done ?
>>
> Yeah, i will send out immediately after this patch set.
> 
Please do things in sensible order ...

-- 
Best regards,
Marek Vasut

[U-Boot] [PATCH v7 3/6] arm: socfpga: Enable FPGA driver on SPL

[Chee, Tien Fong]

On Isn, 2017-06-05 at 14:15 +0200, Marek Vasut wrote:
> On 06/05/2017 02:11 PM, Chee, Tien Fong wrote:
> > 
> > On Isn, 2017-06-05 at 14:08 +0200, Marek Vasut wrote:
> > > 
> > > On 06/05/2017 02:06 PM, Chee, Tien Fong wrote:
> > > > 
> > > > 
> > > > On Isn, 2017-06-05 at 13:24 +0200, Marek Vasut wrote:
> > > > > 
> > > > > 
> > > > > On 06/05/2017 06:02 AM, Chee, Tien Fong wrote:
> > > > > > 
> > > > > > 
> > > > > > 
> > > > > > On Isn, 2017-06-05 at 11:32 +0800, Chee, Tien Fong wrote:
> > > > > > > 
> > > > > > > 
> > > > > > > 
> > > > > > > > 
> > > > > > > > 
> > > > > > > > 
> > > > > > > > > 
> > > > > > > > > 
> > > > > > > > > 
> > > > > > > > > 
> > > > > > > On Sab, 2017-06-03 at 13:27 +0200, Marek Vasut wrote:
> > > > > > > > 
> > > > > > > > 
> > > > > > > > 
> > > > > > > > 
> > > > > > > > On 05/29/2017 06:00 AM, tien.fong.chee at intel.com wrote:
> > > > > > > > > 
> > > > > > > > > 
> > > > > > > > > 
> > > > > > > > > 
> > > > > > > > > 
> > > > > > > > > From: Tien Fong Chee <tien.fong.chee@intel.com>
> > > > > > > > > 
> > > > > > > > > This patch is for enabling the FPGA driver support on
> > > > > > > > > SPL.
> > > > > > > > > 
> > > > > > > > > Signed-off-by: Tien Fong Chee <tien.fong.chee@intel.c
> > > > > > > > > om>
> > > > > > > > > ---
> > > > > > > > >  include/configs/socfpga_common.h | 1 +
> > > > > > > > >  1 file changed, 1 insertion(+)
> > > > > > > > > 
> > > > > > > > > diff --git a/include/configs/socfpga_common.h
> > > > > > > > > b/include/configs/socfpga_common.h
> > > > > > > > > index da7e4ad..e74e7eb 100644
> > > > > > > > > --- a/include/configs/socfpga_common.h
> > > > > > > > > +++ b/include/configs/socfpga_common.h
> > > > > > > > > @@ -110,6 +110,7 @@
> > > > > > > > >  #define CONFIG_FPGA
> > > > > > > > >  #define CONFIG_FPGA_ALTERA
> > > > > > > > >  #define CONFIG_FPGA_SOCFPGA
> > > > > > > > > +#define CONFIG_SPL_FPGA_SUPPORT
> > > > > > > > This should be Kconfig symbol selected in board config.
> > > > > > > > Why
> > > > > > > > is
> > > > > > > > it
> > > > > > > > not
> > > > > > > > Kconfig symbol ?
> > > > > > > > 
> > > > > > Ahha....ijust recalled there is a very important reason i
> > > > > > did
> > > > > > this
> > > > > > because CONFIG_CMD_FPGA which is wrapping all these FPGA
> > > > > > related
> > > > > > CONFIG
> > > > > > is not part of kconfig.
> > > > > it is, so this is nonsense, try git grep next time ...
> > > > > cmd/Kconfig:config CMD_FPGA
> > > > > 
> > > > > > 
> > > > > > 
> > > > > > 
> > > > > > During the build, kconfig and Macro #define are
> > > > > > in two different phase/order, so we might having build
> > > > > > issue
> > > > > > during
> > > > > > kconfig build(1st phase) when some Macro #define which is
> > > > > > 2nd
> > > > > > phase
> > > > > > are
> > > > > > required.
> > > > > I don't understand this, but I think this is bogus.
> > > > > 
> > > > Okay. For example, CONFIG_A in Kconfig depend on CONFIG_B which
> > > > is
> > > > defined in socfpga_common.h. When SPL build, CONFIG_A would not
> > > > be
> > > > set
> > > > to one even CONFIG_B is defined to one in header file, because
> > > > at
> > > > that
> > > > moment build, CONFIG_B is not detected, but header file only
> > > > get
> > > > build
> > > > after Kconfig build done.
> > > Then convert whatever is missing to Kconfig and it's done ?
> > > 
> > Yeah, i will send out immediately after this patch set.
> > 
> Please do things in sensible order ...
> 
I thought we already reach agreement that specific patch for converting
all to kconfig would be after this patch set, since it needs more time
for the tool to execute all the convertion, right?

[U-Boot] [PATCH v7 3/6] arm: socfpga: Enable FPGA driver on SPL

[Marek Vasut]

On 06/05/2017 02:23 PM, Chee, Tien Fong wrote:
> On Isn, 2017-06-05 at 14:15 +0200, Marek Vasut wrote:
>> On 06/05/2017 02:11 PM, Chee, Tien Fong wrote:
>>>
>>> On Isn, 2017-06-05 at 14:08 +0200, Marek Vasut wrote:
>>>>
>>>> On 06/05/2017 02:06 PM, Chee, Tien Fong wrote:
>>>>>
>>>>>
>>>>> On Isn, 2017-06-05 at 13:24 +0200, Marek Vasut wrote:
>>>>>>
>>>>>>
>>>>>> On 06/05/2017 06:02 AM, Chee, Tien Fong wrote:
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> On Isn, 2017-06-05 at 11:32 +0800, Chee, Tien Fong wrote:
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>> On Sab, 2017-06-03 at 13:27 +0200, Marek Vasut wrote:
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> On 05/29/2017 06:00 AM, tien.fong.chee at intel.com wrote:
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> From: Tien Fong Chee <tien.fong.chee@intel.com>
>>>>>>>>>>
>>>>>>>>>> This patch is for enabling the FPGA driver support on
>>>>>>>>>> SPL.
>>>>>>>>>>
>>>>>>>>>> Signed-off-by: Tien Fong Chee <tien.fong.chee@intel.c
>>>>>>>>>> om>
>>>>>>>>>> ---
>>>>>>>>>>  include/configs/socfpga_common.h | 1 +
>>>>>>>>>>  1 file changed, 1 insertion(+)
>>>>>>>>>>
>>>>>>>>>> diff --git a/include/configs/socfpga_common.h
>>>>>>>>>> b/include/configs/socfpga_common.h
>>>>>>>>>> index da7e4ad..e74e7eb 100644
>>>>>>>>>> --- a/include/configs/socfpga_common.h
>>>>>>>>>> +++ b/include/configs/socfpga_common.h
>>>>>>>>>> @@ -110,6 +110,7 @@
>>>>>>>>>>  #define CONFIG_FPGA
>>>>>>>>>>  #define CONFIG_FPGA_ALTERA
>>>>>>>>>>  #define CONFIG_FPGA_SOCFPGA
>>>>>>>>>> +#define CONFIG_SPL_FPGA_SUPPORT
>>>>>>>>> This should be Kconfig symbol selected in board config.
>>>>>>>>> Why
>>>>>>>>> is
>>>>>>>>> it
>>>>>>>>> not
>>>>>>>>> Kconfig symbol ?
>>>>>>>>>
>>>>>>> Ahha....ijust recalled there is a very important reason i
>>>>>>> did
>>>>>>> this
>>>>>>> because CONFIG_CMD_FPGA which is wrapping all these FPGA
>>>>>>> related
>>>>>>> CONFIG
>>>>>>> is not part of kconfig.
>>>>>> it is, so this is nonsense, try git grep next time ...
>>>>>> cmd/Kconfig:config CMD_FPGA
>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> During the build, kconfig and Macro #define are
>>>>>>> in two different phase/order, so we might having build
>>>>>>> issue
>>>>>>> during
>>>>>>> kconfig build(1st phase) when some Macro #define which is
>>>>>>> 2nd
>>>>>>> phase
>>>>>>> are
>>>>>>> required.
>>>>>> I don't understand this, but I think this is bogus.
>>>>>>
>>>>> Okay. For example, CONFIG_A in Kconfig depend on CONFIG_B which
>>>>> is
>>>>> defined in socfpga_common.h. When SPL build, CONFIG_A would not
>>>>> be
>>>>> set
>>>>> to one even CONFIG_B is defined to one in header file, because
>>>>> at
>>>>> that
>>>>> moment build, CONFIG_B is not detected, but header file only
>>>>> get
>>>>> build
>>>>> after Kconfig build done.
>>>> Then convert whatever is missing to Kconfig and it's done ?
>>>>
>>> Yeah, i will send out immediately after this patch set.
>>>
>> Please do things in sensible order ...
>>
> I thought we already reach agreement that specific patch for converting
> all to kconfig would be after this patch set, since it needs more time
> for the tool to execute all the convertion, right?

SPL_FPGA_SUPPORT is Kconfig'd already, so do not add it into
include/configs/*h . If there is a bug, fix it.

-- 
Best regards,
Marek Vasut

[U-Boot] [PATCH v7 3/6] arm: socfpga: Enable FPGA driver on SPL

[Chee, Tien Fong]

On Isn, 2017-06-05 at 14:25 +0200, Marek Vasut wrote:
> On 06/05/2017 02:23 PM, Chee, Tien Fong wrote:
> > 
> > On Isn, 2017-06-05 at 14:15 +0200, Marek Vasut wrote:
> > > 
> > > On 06/05/2017 02:11 PM, Chee, Tien Fong wrote:
> > > > 
> > > > 
> > > > On Isn, 2017-06-05 at 14:08 +0200, Marek Vasut wrote:
> > > > > 
> > > > > 
> > > > > On 06/05/2017 02:06 PM, Chee, Tien Fong wrote:
> > > > > > 
> > > > > > 
> > > > > > 
> > > > > > On Isn, 2017-06-05 at 13:24 +0200, Marek Vasut wrote:
> > > > > > > 
> > > > > > > 
> > > > > > > 
> > > > > > > On 06/05/2017 06:02 AM, Chee, Tien Fong wrote:
> > > > > > > > 
> > > > > > > > 
> > > > > > > > 
> > > > > > > > 
> > > > > > > > On Isn, 2017-06-05 at 11:32 +0800, Chee, Tien Fong
> > > > > > > > wrote:
> > > > > > > > > 
> > > > > > > > > 
> > > > > > > > > 
> > > > > > > > > 
> > > > > > > > > > 
> > > > > > > > > > 
> > > > > > > > > > 
> > > > > > > > > > 
> > > > > > > > > > > 
> > > > > > > > > > > 
> > > > > > > > > > > 
> > > > > > > > > > > 
> > > > > > > > > > > 
> > > > > > > > > On Sab, 2017-06-03 at 13:27 +0200, Marek Vasut wrote:
> > > > > > > > > > 
> > > > > > > > > > 
> > > > > > > > > > 
> > > > > > > > > > 
> > > > > > > > > > 
> > > > > > > > > > On 05/29/2017 06:00 AM, tien.fong.chee at intel.com
> > > > > > > > > > wrote:
> > > > > > > > > > > 
> > > > > > > > > > > 
> > > > > > > > > > > 
> > > > > > > > > > > 
> > > > > > > > > > > 
> > > > > > > > > > > 
> > > > > > > > > > > From: Tien Fong Chee <tien.fong.chee@intel.com>
> > > > > > > > > > > 
> > > > > > > > > > > This patch is for enabling the FPGA driver
> > > > > > > > > > > support on
> > > > > > > > > > > SPL.
> > > > > > > > > > > 
> > > > > > > > > > > Signed-off-by: Tien Fong Chee <tien.fong.chee@int
> > > > > > > > > > > el.c
> > > > > > > > > > > om>
> > > > > > > > > > > ---
> > > > > > > > > > >  include/configs/socfpga_common.h | 1 +
> > > > > > > > > > >  1 file changed, 1 insertion(+)
> > > > > > > > > > > 
> > > > > > > > > > > diff --git a/include/configs/socfpga_common.h
> > > > > > > > > > > b/include/configs/socfpga_common.h
> > > > > > > > > > > index da7e4ad..e74e7eb 100644
> > > > > > > > > > > --- a/include/configs/socfpga_common.h
> > > > > > > > > > > +++ b/include/configs/socfpga_common.h
> > > > > > > > > > > @@ -110,6 +110,7 @@
> > > > > > > > > > >  #define CONFIG_FPGA
> > > > > > > > > > >  #define CONFIG_FPGA_ALTERA
> > > > > > > > > > >  #define CONFIG_FPGA_SOCFPGA
> > > > > > > > > > > +#define CONFIG_SPL_FPGA_SUPPORT
> > > > > > > > > > This should be Kconfig symbol selected in board
> > > > > > > > > > config.
> > > > > > > > > > Why
> > > > > > > > > > is
> > > > > > > > > > it
> > > > > > > > > > not
> > > > > > > > > > Kconfig symbol ?
> > > > > > > > > > 
> > > > > > > > Ahha....ijust recalled there is a very important reason
> > > > > > > > i
> > > > > > > > did
> > > > > > > > this
> > > > > > > > because CONFIG_CMD_FPGA which is wrapping all these
> > > > > > > > FPGA
> > > > > > > > related
> > > > > > > > CONFIG
> > > > > > > > is not part of kconfig.
> > > > > > > it is, so this is nonsense, try git grep next time ...
> > > > > > > cmd/Kconfig:config CMD_FPGA
> > > > > > > 
> > > > > > > > 
> > > > > > > > 
> > > > > > > > 
> > > > > > > > 
> > > > > > > > During the build, kconfig and Macro #define are
> > > > > > > > in two different phase/order, so we might having build
> > > > > > > > issue
> > > > > > > > during
> > > > > > > > kconfig build(1st phase) when some Macro #define which
> > > > > > > > is
> > > > > > > > 2nd
> > > > > > > > phase
> > > > > > > > are
> > > > > > > > required.
> > > > > > > I don't understand this, but I think this is bogus.
> > > > > > > 
> > > > > > Okay. For example, CONFIG_A in Kconfig depend on CONFIG_B
> > > > > > which
> > > > > > is
> > > > > > defined in socfpga_common.h. When SPL build, CONFIG_A would
> > > > > > not
> > > > > > be
> > > > > > set
> > > > > > to one even CONFIG_B is defined to one in header file,
> > > > > > because
> > > > > > at
> > > > > > that
> > > > > > moment build, CONFIG_B is not detected, but header file
> > > > > > only
> > > > > > get
> > > > > > build
> > > > > > after Kconfig build done.
> > > > > Then convert whatever is missing to Kconfig and it's done ?
> > > > > 
> > > > Yeah, i will send out immediately after this patch set.
> > > > 
> > > Please do things in sensible order ...
> > > 
> > I thought we already reach agreement that specific patch for
> > converting
> > all to kconfig would be after this patch set, since it needs more
> > time
> > for the tool to execute all the convertion, right?
> SPL_FPGA_SUPPORT is Kconfig'd already, so do not add it into
> include/configs/*h . If there is a bug, fix it.
> 
I don't think that is bug, this is how the build order is designed,
Kconfig is build 1st, then only compiling the header/C files. So i
would suggest all related/dependency CONFIG put in one place,either all
in Kconfig or in header file. 

So, i suggest to submit a seprate patch for converting all to Kconfig
after this patchset, or i can pull this patch into this patchset.

If you prefer adding SPL_FPGA_SUPPORT into this patchset, i need to
rerun the tool for this macro, because a lot defconfigs require FPGA
feature enabled in SPL build. I also need to run all defconfigs
compilation and make sure above example is not hit, otherwise FPGA
driver could be failed in the build.

What do you think?

Thanks.

[U-Boot] [PATCH v7 3/6] arm: socfpga: Enable FPGA driver on SPL

[Marek Vasut]

On 06/05/2017 02:57 PM, Chee, Tien Fong wrote:
> On Isn, 2017-06-05 at 14:25 +0200, Marek Vasut wrote:
>> On 06/05/2017 02:23 PM, Chee, Tien Fong wrote:
>>>
>>> On Isn, 2017-06-05 at 14:15 +0200, Marek Vasut wrote:
>>>>
>>>> On 06/05/2017 02:11 PM, Chee, Tien Fong wrote:
>>>>>
>>>>>
>>>>> On Isn, 2017-06-05 at 14:08 +0200, Marek Vasut wrote:
>>>>>>
>>>>>>
>>>>>> On 06/05/2017 02:06 PM, Chee, Tien Fong wrote:
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> On Isn, 2017-06-05 at 13:24 +0200, Marek Vasut wrote:
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>> On 06/05/2017 06:02 AM, Chee, Tien Fong wrote:
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> On Isn, 2017-06-05 at 11:32 +0800, Chee, Tien Fong
>>>>>>>>> wrote:
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>> On Sab, 2017-06-03 at 13:27 +0200, Marek Vasut wrote:
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>> On 05/29/2017 06:00 AM, tien.fong.chee at intel.com
>>>>>>>>>>> wrote:
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>> From: Tien Fong Chee <tien.fong.chee@intel.com>
>>>>>>>>>>>>
>>>>>>>>>>>> This patch is for enabling the FPGA driver
>>>>>>>>>>>> support on
>>>>>>>>>>>> SPL.
>>>>>>>>>>>>
>>>>>>>>>>>> Signed-off-by: Tien Fong Chee <tien.fong.chee@int
>>>>>>>>>>>> el.c
>>>>>>>>>>>> om>
>>>>>>>>>>>> ---
>>>>>>>>>>>>  include/configs/socfpga_common.h | 1 +
>>>>>>>>>>>>  1 file changed, 1 insertion(+)
>>>>>>>>>>>>
>>>>>>>>>>>> diff --git a/include/configs/socfpga_common.h
>>>>>>>>>>>> b/include/configs/socfpga_common.h
>>>>>>>>>>>> index da7e4ad..e74e7eb 100644
>>>>>>>>>>>> --- a/include/configs/socfpga_common.h
>>>>>>>>>>>> +++ b/include/configs/socfpga_common.h
>>>>>>>>>>>> @@ -110,6 +110,7 @@
>>>>>>>>>>>>  #define CONFIG_FPGA
>>>>>>>>>>>>  #define CONFIG_FPGA_ALTERA
>>>>>>>>>>>>  #define CONFIG_FPGA_SOCFPGA
>>>>>>>>>>>> +#define CONFIG_SPL_FPGA_SUPPORT
>>>>>>>>>>> This should be Kconfig symbol selected in board
>>>>>>>>>>> config.
>>>>>>>>>>> Why
>>>>>>>>>>> is
>>>>>>>>>>> it
>>>>>>>>>>> not
>>>>>>>>>>> Kconfig symbol ?
>>>>>>>>>>>
>>>>>>>>> Ahha....ijust recalled there is a very important reason
>>>>>>>>> i
>>>>>>>>> did
>>>>>>>>> this
>>>>>>>>> because CONFIG_CMD_FPGA which is wrapping all these
>>>>>>>>> FPGA
>>>>>>>>> related
>>>>>>>>> CONFIG
>>>>>>>>> is not part of kconfig.
>>>>>>>> it is, so this is nonsense, try git grep next time ...
>>>>>>>> cmd/Kconfig:config CMD_FPGA
>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> During the build, kconfig and Macro #define are
>>>>>>>>> in two different phase/order, so we might having build
>>>>>>>>> issue
>>>>>>>>> during
>>>>>>>>> kconfig build(1st phase) when some Macro #define which
>>>>>>>>> is
>>>>>>>>> 2nd
>>>>>>>>> phase
>>>>>>>>> are
>>>>>>>>> required.
>>>>>>>> I don't understand this, but I think this is bogus.
>>>>>>>>
>>>>>>> Okay. For example, CONFIG_A in Kconfig depend on CONFIG_B
>>>>>>> which
>>>>>>> is
>>>>>>> defined in socfpga_common.h. When SPL build, CONFIG_A would
>>>>>>> not
>>>>>>> be
>>>>>>> set
>>>>>>> to one even CONFIG_B is defined to one in header file,
>>>>>>> because
>>>>>>> at
>>>>>>> that
>>>>>>> moment build, CONFIG_B is not detected, but header file
>>>>>>> only
>>>>>>> get
>>>>>>> build
>>>>>>> after Kconfig build done.
>>>>>> Then convert whatever is missing to Kconfig and it's done ?
>>>>>>
>>>>> Yeah, i will send out immediately after this patch set.
>>>>>
>>>> Please do things in sensible order ...
>>>>
>>> I thought we already reach agreement that specific patch for
>>> converting
>>> all to kconfig would be after this patch set, since it needs more
>>> time
>>> for the tool to execute all the convertion, right?
>> SPL_FPGA_SUPPORT is Kconfig'd already, so do not add it into
>> include/configs/*h . If there is a bug, fix it.
>>
> I don't think that is bug, this is how the build order is designed,
> Kconfig is build 1st, then only compiling the header/C files. So i
> would suggest all related/dependency CONFIG put in one place,either all
> in Kconfig or in header file. 

If we put anything which is already using Kconfig into the header file
again, what's the point of using Kconfig ?

> So, i suggest to submit a seprate patch for converting all to Kconfig
> after this patchset, or i can pull this patch into this patchset.
> 
> If you prefer adding SPL_FPGA_SUPPORT into this patchset, i need to
> rerun the tool for this macro, because a lot defconfigs require FPGA
> feature enabled in SPL build. I also need to run all defconfigs
> compilation and make sure above example is not hit, otherwise FPGA
> driver could be failed in the build.
> 
> What do you think?

I think the SPL_FPGA_SUPPORT is already Kconfig-ified and I don't quite
understand what's the problem you have, sorry. But I am positive any
Kconfig option shouldn't be selected in the config header file.

> Thanks.
> 


-- 
Best regards,
Marek Vasut

[U-Boot] [PATCH v7 3/6] arm: socfpga: Enable FPGA driver on SPL

[Chee, Tien Fong]

On Isn, 2017-06-05 at 15:00 +0200, Marek Vasut wrote:
> On 06/05/2017 02:57 PM, Chee, Tien Fong wrote:
> > 
> > On Isn, 2017-06-05 at 14:25 +0200, Marek Vasut wrote:
> > > 
> > > On 06/05/2017 02:23 PM, Chee, Tien Fong wrote:
> > > > 
> > > > 
> > > > On Isn, 2017-06-05 at 14:15 +0200, Marek Vasut wrote:
> > > > > 
> > > > > 
> > > > > On 06/05/2017 02:11 PM, Chee, Tien Fong wrote:
> > > > > > 
> > > > > > 
> > > > > > 
> > > > > > On Isn, 2017-06-05 at 14:08 +0200, Marek Vasut wrote:
> > > > > > > 
> > > > > > > 
> > > > > > > 
> > > > > > > On 06/05/2017 02:06 PM, Chee, Tien Fong wrote:
> > > > > > > > 
> > > > > > > > 
> > > > > > > > 
> > > > > > > > 
> > > > > > > > On Isn, 2017-06-05 at 13:24 +0200, Marek Vasut wrote:
> > > > > > > > > 
> > > > > > > > > 
> > > > > > > > > 
> > > > > > > > > 
> > > > > > > > > On 06/05/2017 06:02 AM, Chee, Tien Fong wrote:
> > > > > > > > > > 
> > > > > > > > > > 
> > > > > > > > > > 
> > > > > > > > > > 
> > > > > > > > > > 
> > > > > > > > > > On Isn, 2017-06-05 at 11:32 +0800, Chee, Tien Fong
> > > > > > > > > > wrote:
> > > > > > > > > > > 
> > > > > > > > > > > 
> > > > > > > > > > > 
> > > > > > > > > > > 
> > > > > > > > > > > 
> > > > > > > > > > > > 
> > > > > > > > > > > > 
> > > > > > > > > > > > 
> > > > > > > > > > > > 
> > > > > > > > > > > > 
> > > > > > > > > > > > > 
> > > > > > > > > > > > > 
> > > > > > > > > > > > > 
> > > > > > > > > > > > > 
> > > > > > > > > > > > > 
> > > > > > > > > > > > > 
> > > > > > > > > > > On Sab, 2017-06-03 at 13:27 +0200, Marek Vasut
> > > > > > > > > > > wrote:
> > > > > > > > > > > > 
> > > > > > > > > > > > 
> > > > > > > > > > > > 
> > > > > > > > > > > > 
> > > > > > > > > > > > 
> > > > > > > > > > > > 
> > > > > > > > > > > > On 05/29/2017 06:00 AM, tien.fong.chee at intel.co
> > > > > > > > > > > > m
> > > > > > > > > > > > wrote:
> > > > > > > > > > > > > 
> > > > > > > > > > > > > 
> > > > > > > > > > > > > 
> > > > > > > > > > > > > 
> > > > > > > > > > > > > 
> > > > > > > > > > > > > 
> > > > > > > > > > > > > 
> > > > > > > > > > > > > From: Tien Fong Chee <tien.fong.chee@intel.co
> > > > > > > > > > > > > m>
> > > > > > > > > > > > > 
> > > > > > > > > > > > > This patch is for enabling the FPGA driver
> > > > > > > > > > > > > support on
> > > > > > > > > > > > > SPL.
> > > > > > > > > > > > > 
> > > > > > > > > > > > > Signed-off-by: Tien Fong Chee <tien.fong.chee
> > > > > > > > > > > > > @int
> > > > > > > > > > > > > el.c
> > > > > > > > > > > > > om>
> > > > > > > > > > > > > ---
> > > > > > > > > > > > >  include/configs/socfpga_common.h | 1 +
> > > > > > > > > > > > >  1 file changed, 1 insertion(+)
> > > > > > > > > > > > > 
> > > > > > > > > > > > > diff --git a/include/configs/socfpga_common.h
> > > > > > > > > > > > > b/include/configs/socfpga_common.h
> > > > > > > > > > > > > index da7e4ad..e74e7eb 100644
> > > > > > > > > > > > > --- a/include/configs/socfpga_common.h
> > > > > > > > > > > > > +++ b/include/configs/socfpga_common.h
> > > > > > > > > > > > > @@ -110,6 +110,7 @@
> > > > > > > > > > > > >  #define CONFIG_FPGA
> > > > > > > > > > > > >  #define CONFIG_FPGA_ALTERA
> > > > > > > > > > > > >  #define CONFIG_FPGA_SOCFPGA
> > > > > > > > > > > > > +#define CONFIG_SPL_FPGA_SUPPORT
> > > > > > > > > > > > This should be Kconfig symbol selected in board
> > > > > > > > > > > > config.
> > > > > > > > > > > > Why
> > > > > > > > > > > > is
> > > > > > > > > > > > it
> > > > > > > > > > > > not
> > > > > > > > > > > > Kconfig symbol ?
> > > > > > > > > > > > 
> > > > > > > > > > Ahha....ijust recalled there is a very important
> > > > > > > > > > reason
> > > > > > > > > > i
> > > > > > > > > > did
> > > > > > > > > > this
> > > > > > > > > > because CONFIG_CMD_FPGA which is wrapping all these
> > > > > > > > > > FPGA
> > > > > > > > > > related
> > > > > > > > > > CONFIG
> > > > > > > > > > is not part of kconfig.
> > > > > > > > > it is, so this is nonsense, try git grep next time
> > > > > > > > > ...
> > > > > > > > > cmd/Kconfig:config CMD_FPGA
> > > > > > > > > 
> > > > > > > > > > 
> > > > > > > > > > 
> > > > > > > > > > 
> > > > > > > > > > 
> > > > > > > > > > 
> > > > > > > > > > During the build, kconfig and Macro #define are
> > > > > > > > > > in two different phase/order, so we might having
> > > > > > > > > > build
> > > > > > > > > > issue
> > > > > > > > > > during
> > > > > > > > > > kconfig build(1st phase) when some Macro #define
> > > > > > > > > > which
> > > > > > > > > > is
> > > > > > > > > > 2nd
> > > > > > > > > > phase
> > > > > > > > > > are
> > > > > > > > > > required.
> > > > > > > > > I don't understand this, but I think this is bogus.
> > > > > > > > > 
> > > > > > > > Okay. For example, CONFIG_A in Kconfig depend on
> > > > > > > > CONFIG_B
> > > > > > > > which
> > > > > > > > is
> > > > > > > > defined in socfpga_common.h. When SPL build, CONFIG_A
> > > > > > > > would
> > > > > > > > not
> > > > > > > > be
> > > > > > > > set
> > > > > > > > to one even CONFIG_B is defined to one in header file,
> > > > > > > > because
> > > > > > > > at
> > > > > > > > that
> > > > > > > > moment build, CONFIG_B is not detected, but header file
> > > > > > > > only
> > > > > > > > get
> > > > > > > > build
> > > > > > > > after Kconfig build done.
> > > > > > > Then convert whatever is missing to Kconfig and it's done
> > > > > > > ?
> > > > > > > 
> > > > > > Yeah, i will send out immediately after this patch set.
> > > > > > 
> > > > > Please do things in sensible order ...
> > > > > 
> > > > I thought we already reach agreement that specific patch for
> > > > converting
> > > > all to kconfig would be after this patch set, since it needs
> > > > more
> > > > time
> > > > for the tool to execute all the convertion, right?
> > > SPL_FPGA_SUPPORT is Kconfig'd already, so do not add it into
> > > include/configs/*h . If there is a bug, fix it.
> > > 
> > I don't think that is bug, this is how the build order is designed,
> > Kconfig is build 1st, then only compiling the header/C files. So i
> > would suggest all related/dependency CONFIG put in one place,either
> > all
> > in Kconfig or in header file. 
> If we put anything which is already using Kconfig into the header
> file
> again, what's the point of using Kconfig ?
> 
> > 
> > So, i suggest to submit a seprate patch for converting all to
> > Kconfig
> > after this patchset, or i can pull this patch into this patchset.
> > 
> > If you prefer adding SPL_FPGA_SUPPORT into this patchset, i need to
> > rerun the tool for this macro, because a lot defconfigs require
> > FPGA
> > feature enabled in SPL build. I also need to run all defconfigs
> > compilation and make sure above example is not hit, otherwise FPGA
> > driver could be failed in the build.
> > 
> > What do you think?
> I think the SPL_FPGA_SUPPORT is already Kconfig-ified and I don't
> quite
> understand what's the problem you have, sorry. But I am positive any
> Kconfig option shouldn't be selected in the config header file.
> 
How about i just pull the patch convert all to Kconfig into this patch
set, and this will replace the patch 3. I just recalled why i need to
to enable the SPL FPGA build on patch 4 because patch 5 FPGA manager
already being moved to drivers/fpga/ hence some functions from FPGA
manager are required in SPL phase. In this arrangement, we can avoid
duplicate effort and time spending since we already have that Kconfig
patch.

Are you OK?
> >
> > Thanks.
> > 
> 

[U-Boot] [PATCH v7 3/6] arm: socfpga: Enable FPGA driver on SPL

[Marek Vasut]

On 06/06/2017 05:46 AM, Chee, Tien Fong wrote:
> On Isn, 2017-06-05 at 15:00 +0200, Marek Vasut wrote:
>> On 06/05/2017 02:57 PM, Chee, Tien Fong wrote:
>>>
>>> On Isn, 2017-06-05 at 14:25 +0200, Marek Vasut wrote:
>>>>
>>>> On 06/05/2017 02:23 PM, Chee, Tien Fong wrote:
>>>>>
>>>>>
>>>>> On Isn, 2017-06-05 at 14:15 +0200, Marek Vasut wrote:
>>>>>>
>>>>>>
>>>>>> On 06/05/2017 02:11 PM, Chee, Tien Fong wrote:
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> On Isn, 2017-06-05 at 14:08 +0200, Marek Vasut wrote:
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>> On 06/05/2017 02:06 PM, Chee, Tien Fong wrote:
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> On Isn, 2017-06-05 at 13:24 +0200, Marek Vasut wrote:
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> On 06/05/2017 06:02 AM, Chee, Tien Fong wrote:
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>> On Isn, 2017-06-05 at 11:32 +0800, Chee, Tien Fong
>>>>>>>>>>> wrote:
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>> On Sab, 2017-06-03 at 13:27 +0200, Marek Vasut
>>>>>>>>>>>> wrote:
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>> On 05/29/2017 06:00 AM, tien.fong.chee at intel.co
>>>>>>>>>>>>> m
>>>>>>>>>>>>> wrote:
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> From: Tien Fong Chee <tien.fong.chee@intel.co
>>>>>>>>>>>>>> m>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> This patch is for enabling the FPGA driver
>>>>>>>>>>>>>> support on
>>>>>>>>>>>>>> SPL.
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> Signed-off-by: Tien Fong Chee <tien.fong.chee
>>>>>>>>>>>>>> @int
>>>>>>>>>>>>>> el.c
>>>>>>>>>>>>>> om>
>>>>>>>>>>>>>> ---
>>>>>>>>>>>>>>  include/configs/socfpga_common.h | 1 +
>>>>>>>>>>>>>>  1 file changed, 1 insertion(+)
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> diff --git a/include/configs/socfpga_common.h
>>>>>>>>>>>>>> b/include/configs/socfpga_common.h
>>>>>>>>>>>>>> index da7e4ad..e74e7eb 100644
>>>>>>>>>>>>>> --- a/include/configs/socfpga_common.h
>>>>>>>>>>>>>> +++ b/include/configs/socfpga_common.h
>>>>>>>>>>>>>> @@ -110,6 +110,7 @@
>>>>>>>>>>>>>>  #define CONFIG_FPGA
>>>>>>>>>>>>>>  #define CONFIG_FPGA_ALTERA
>>>>>>>>>>>>>>  #define CONFIG_FPGA_SOCFPGA
>>>>>>>>>>>>>> +#define CONFIG_SPL_FPGA_SUPPORT
>>>>>>>>>>>>> This should be Kconfig symbol selected in board
>>>>>>>>>>>>> config.
>>>>>>>>>>>>> Why
>>>>>>>>>>>>> is
>>>>>>>>>>>>> it
>>>>>>>>>>>>> not
>>>>>>>>>>>>> Kconfig symbol ?
>>>>>>>>>>>>>
>>>>>>>>>>> Ahha....ijust recalled there is a very important
>>>>>>>>>>> reason
>>>>>>>>>>> i
>>>>>>>>>>> did
>>>>>>>>>>> this
>>>>>>>>>>> because CONFIG_CMD_FPGA which is wrapping all these
>>>>>>>>>>> FPGA
>>>>>>>>>>> related
>>>>>>>>>>> CONFIG
>>>>>>>>>>> is not part of kconfig.
>>>>>>>>>> it is, so this is nonsense, try git grep next time
>>>>>>>>>> ...
>>>>>>>>>> cmd/Kconfig:config CMD_FPGA
>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>> During the build, kconfig and Macro #define are
>>>>>>>>>>> in two different phase/order, so we might having
>>>>>>>>>>> build
>>>>>>>>>>> issue
>>>>>>>>>>> during
>>>>>>>>>>> kconfig build(1st phase) when some Macro #define
>>>>>>>>>>> which
>>>>>>>>>>> is
>>>>>>>>>>> 2nd
>>>>>>>>>>> phase
>>>>>>>>>>> are
>>>>>>>>>>> required.
>>>>>>>>>> I don't understand this, but I think this is bogus.
>>>>>>>>>>
>>>>>>>>> Okay. For example, CONFIG_A in Kconfig depend on
>>>>>>>>> CONFIG_B
>>>>>>>>> which
>>>>>>>>> is
>>>>>>>>> defined in socfpga_common.h. When SPL build, CONFIG_A
>>>>>>>>> would
>>>>>>>>> not
>>>>>>>>> be
>>>>>>>>> set
>>>>>>>>> to one even CONFIG_B is defined to one in header file,
>>>>>>>>> because
>>>>>>>>> at
>>>>>>>>> that
>>>>>>>>> moment build, CONFIG_B is not detected, but header file
>>>>>>>>> only
>>>>>>>>> get
>>>>>>>>> build
>>>>>>>>> after Kconfig build done.
>>>>>>>> Then convert whatever is missing to Kconfig and it's done
>>>>>>>> ?
>>>>>>>>
>>>>>>> Yeah, i will send out immediately after this patch set.
>>>>>>>
>>>>>> Please do things in sensible order ...
>>>>>>
>>>>> I thought we already reach agreement that specific patch for
>>>>> converting
>>>>> all to kconfig would be after this patch set, since it needs
>>>>> more
>>>>> time
>>>>> for the tool to execute all the convertion, right?
>>>> SPL_FPGA_SUPPORT is Kconfig'd already, so do not add it into
>>>> include/configs/*h . If there is a bug, fix it.
>>>>
>>> I don't think that is bug, this is how the build order is designed,
>>> Kconfig is build 1st, then only compiling the header/C files. So i
>>> would suggest all related/dependency CONFIG put in one place,either
>>> all
>>> in Kconfig or in header file. 
>> If we put anything which is already using Kconfig into the header
>> file
>> again, what's the point of using Kconfig ?
>>
>>>
>>> So, i suggest to submit a seprate patch for converting all to
>>> Kconfig
>>> after this patchset, or i can pull this patch into this patchset.
>>>
>>> If you prefer adding SPL_FPGA_SUPPORT into this patchset, i need to
>>> rerun the tool for this macro, because a lot defconfigs require
>>> FPGA
>>> feature enabled in SPL build. I also need to run all defconfigs
>>> compilation and make sure above example is not hit, otherwise FPGA
>>> driver could be failed in the build.
>>>
>>> What do you think?
>> I think the SPL_FPGA_SUPPORT is already Kconfig-ified and I don't
>> quite
>> understand what's the problem you have, sorry. But I am positive any
>> Kconfig option shouldn't be selected in the config header file.
>>
> How about i just pull the patch convert all to Kconfig into this patch
> set, and this will replace the patch 3. I just recalled why i need to
> to enable the SPL FPGA build on patch 4 because patch 5 FPGA manager
> already being moved to drivers/fpga/ hence some functions from FPGA
> manager are required in SPL phase. In this arrangement, we can avoid
> duplicate effort and time spending since we already have that Kconfig
> patch.

I'll check the patches.

> Are you OK?

I'm fine, thank you for your concern.

-- 
Best regards,
Marek Vasut

[U-Boot] [PATCH v7 4/6] drivers: Enable FPGA driver build on SPL

[tien.fong.chee at intel.com]

From: Tien Fong Chee <tien.fong.chee@intel.com>

Enable FPGA driver build for SPL because FPGA driver is needed for SPL
to configure and getting DDR up before loading U-boot into DDR and
booting from there.

Signed-off-by: Tien Fong Chee <tien.fong.chee@intel.com>
---
 drivers/Makefile | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/Makefile b/drivers/Makefile
index 64c39d3..4478212 100644
--- a/drivers/Makefile
+++ b/drivers/Makefile
@@ -48,6 +48,7 @@ obj-$(CONFIG_OMAP_USB_PHY) += usb/phy/
 obj-$(CONFIG_SPL_SATA_SUPPORT) += block/
 obj-$(CONFIG_SPL_USB_HOST_SUPPORT) += block/
 obj-$(CONFIG_SPL_MMC_SUPPORT) += block/
+obj-$(CONFIG_SPL_FPGA_SUPPORT) += fpga/
 endif
 
 ifdef CONFIG_TPL_BUILD
-- 
2.2.0

[U-Boot] [PATCH v7 4/6] drivers: Enable FPGA driver build on SPL

[Marek Vasut]

On 05/29/2017 06:00 AM, tien.fong.chee at intel.com wrote:
> From: Tien Fong Chee <tien.fong.chee@intel.com>
> 
> Enable FPGA driver build for SPL because FPGA driver is needed for SPL
> to configure and getting DDR up before loading U-boot into DDR and
> booting from there.
> 
> Signed-off-by: Tien Fong Chee <tien.fong.chee@intel.com>

The thing I fail to understand is why you're sending the patches in
seemingly random order. You add/change piece of code, then enable
something and then add the relevant code you're enabling. I really do
not understand that.

The patches should have some logical order -- change existing code, add
new code, enable stuff.

Anyway, please collect the Acks, fix the nit and resubmit.

> ---
>  drivers/Makefile | 1 +
>  1 file changed, 1 insertion(+)
> 
> diff --git a/drivers/Makefile b/drivers/Makefile
> index 64c39d3..4478212 100644
> --- a/drivers/Makefile
> +++ b/drivers/Makefile
> @@ -48,6 +48,7 @@ obj-$(CONFIG_OMAP_USB_PHY) += usb/phy/
>  obj-$(CONFIG_SPL_SATA_SUPPORT) += block/
>  obj-$(CONFIG_SPL_USB_HOST_SUPPORT) += block/
>  obj-$(CONFIG_SPL_MMC_SUPPORT) += block/
> +obj-$(CONFIG_SPL_FPGA_SUPPORT) += fpga/
>  endif
>  
>  ifdef CONFIG_TPL_BUILD
> 


-- 
Best regards,
Marek Vasut

[U-Boot] [PATCH v7 4/6] drivers: Enable FPGA driver build on SPL

[Chee, Tien Fong]

On Sab, 2017-06-03 at 13:29 +0200, Marek Vasut wrote:
> On 05/29/2017 06:00 AM, tien.fong.chee at intel.com wrote:
> > 
> > From: Tien Fong Chee <tien.fong.chee@intel.com>
> > 
> > Enable FPGA driver build for SPL because FPGA driver is needed for
> > SPL
> > to configure and getting DDR up before loading U-boot into DDR and
> > booting from there.
> > 
> > Signed-off-by: Tien Fong Chee <tien.fong.chee@intel.com>
> The thing I fail to understand is why you're sending the patches in
> seemingly random order. You add/change piece of code, then enable
> something and then add the relevant code you're enabling. I really do
> not understand that.
> 
> The patches should have some logical order -- change existing code,
> add
> new code, enable stuff.
> 
> Anyway, please collect the Acks, fix the nit and resubmit.
> 
Sorry for confusing, i enabled the stuff just to detect any break and
bugs as early as possible. I will follow the logical order next time :)
.
> > 
> > ---
> >  drivers/Makefile | 1 +
> >  1 file changed, 1 insertion(+)
> > 
> > diff --git a/drivers/Makefile b/drivers/Makefile
> > index 64c39d3..4478212 100644
> > --- a/drivers/Makefile
> > +++ b/drivers/Makefile
> > @@ -48,6 +48,7 @@ obj-$(CONFIG_OMAP_USB_PHY) += usb/phy/
> >  obj-$(CONFIG_SPL_SATA_SUPPORT) += block/
> >  obj-$(CONFIG_SPL_USB_HOST_SUPPORT) += block/
> >  obj-$(CONFIG_SPL_MMC_SUPPORT) += block/
> > +obj-$(CONFIG_SPL_FPGA_SUPPORT) += fpga/
> >  endif
> >  
> >  ifdef CONFIG_TPL_BUILD
> > 
> 

[U-Boot] [PATCH v7 5/6] arm: socfpga: Move FPGA manager driver to FPGA driver

[tien.fong.chee at intel.com]

From: Tien Fong Chee <tien.fong.chee@intel.com>

Move FPGA manager driver which is Gen5 specific code from arch/arm/
into FPGA driver at driver/fpga/. No functional change.

Signed-off-by: Tien Fong Chee <tien.fong.chee@intel.com>
---
 arch/arm/mach-socfpga/Makefile       |  1 -
 arch/arm/mach-socfpga/fpga_manager.c | 78 ------------------------------------
 drivers/fpga/socfpga_gen5.c          | 54 +++++++++++++++++++++++++
 3 files changed, 54 insertions(+), 79 deletions(-)
 delete mode 100644 arch/arm/mach-socfpga/fpga_manager.c

diff --git a/arch/arm/mach-socfpga/Makefile b/arch/arm/mach-socfpga/Makefile
index 286bfef..824cd8e 100644
--- a/arch/arm/mach-socfpga/Makefile
+++ b/arch/arm/mach-socfpga/Makefile
@@ -20,7 +20,6 @@ obj-y	+= reset_manager_gen5.o
 obj-y	+= scan_manager.o
 obj-y	+= system_manager_gen5.o
 obj-y	+= wrap_pll_config.o
-obj-y	+= fpga_manager.o
 endif
 
 ifdef CONFIG_TARGET_SOCFPGA_ARRIA10
diff --git a/arch/arm/mach-socfpga/fpga_manager.c b/arch/arm/mach-socfpga/fpga_manager.c
deleted file mode 100644
index f909573..0000000
--- a/arch/arm/mach-socfpga/fpga_manager.c
+++ /dev/null
@@ -1,78 +0,0 @@
-/*
- * Copyright (C) 2012 Altera Corporation <www.altera.com>
- * All rights reserved.
- *
- * This file contains only support functions used also by the SoCFPGA
- * platform code, the real meat is located in drivers/fpga/socfpga.c .
- *
- * SPDX-License-Identifier:	BSD-3-Clause
- */
-
-#include <common.h>
-#include <asm/io.h>
-#include <linux/errno.h>
-#include <asm/arch/fpga_manager.h>
-#include <asm/arch/reset_manager.h>
-#include <asm/arch/system_manager.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-/* Timeout count */
-#define FPGA_TIMEOUT_CNT		0x1000000
-
-static struct socfpga_fpga_manager *fpgamgr_regs =
-	(struct socfpga_fpga_manager *)SOCFPGA_FPGAMGRREGS_ADDRESS;
-
-/* Check whether FPGA Init_Done signal is high */
-static int is_fpgamgr_initdone_high(void)
-{
-	unsigned long val;
-
-	val = readl(&fpgamgr_regs->gpio_ext_porta);
-	return val & FPGAMGRREGS_MON_GPIO_EXT_PORTA_ID_MASK;
-}
-
-/* Get the FPGA mode */
-int fpgamgr_get_mode(void)
-{
-	unsigned long val;
-
-	val = readl(&fpgamgr_regs->stat);
-	return val & FPGAMGRREGS_STAT_MODE_MASK;
-}
-
-/* Check whether FPGA is ready to be accessed */
-int fpgamgr_test_fpga_ready(void)
-{
-	/* Check for init done signal */
-	if (!is_fpgamgr_initdone_high())
-		return 0;
-
-	/* Check again to avoid false glitches */
-	if (!is_fpgamgr_initdone_high())
-		return 0;
-
-	if (fpgamgr_get_mode() != FPGAMGRREGS_MODE_USERMODE)
-		return 0;
-
-	return 1;
-}
-
-/* Poll until FPGA is ready to be accessed or timeout occurred */
-int fpgamgr_poll_fpga_ready(void)
-{
-	unsigned long i;
-
-	/* If FPGA is blank, wait till WD invoke warm reset */
-	for (i = 0; i < FPGA_TIMEOUT_CNT; i++) {
-		/* check for init done signal */
-		if (!is_fpgamgr_initdone_high())
-			continue;
-		/* check again to avoid false glitches */
-		if (!is_fpgamgr_initdone_high())
-			continue;
-		return 1;
-	}
-
-	return 0;
-}
diff --git a/drivers/fpga/socfpga_gen5.c b/drivers/fpga/socfpga_gen5.c
index 3dfb030..d8f222a 100644
--- a/drivers/fpga/socfpga_gen5.c
+++ b/drivers/fpga/socfpga_gen5.c
@@ -21,6 +21,60 @@ static struct socfpga_fpga_manager *fpgamgr_regs =
 static struct socfpga_system_manager *sysmgr_regs =
 	(struct socfpga_system_manager *)SOCFPGA_SYSMGR_ADDRESS;
 
+/* Check whether FPGA Init_Done signal is high */
+static int is_fpgamgr_initdone_high(void)
+{
+	unsigned long val;
+
+	val = readl(&fpgamgr_regs->gpio_ext_porta);
+	return val & FPGAMGRREGS_MON_GPIO_EXT_PORTA_ID_MASK;
+}
+
+/* Get the FPGA mode */
+int fpgamgr_get_mode(void)
+{
+	unsigned long val;
+
+	val = readl(&fpgamgr_regs->stat);
+	return val & FPGAMGRREGS_STAT_MODE_MASK;
+}
+
+/* Check whether FPGA is ready to be accessed */
+int fpgamgr_test_fpga_ready(void)
+{
+	/* Check for init done signal */
+	if (!is_fpgamgr_initdone_high())
+		return 0;
+
+	/* Check again to avoid false glitches */
+	if (!is_fpgamgr_initdone_high())
+		return 0;
+
+	if (fpgamgr_get_mode() != FPGAMGRREGS_MODE_USERMODE)
+		return 0;
+
+	return 1;
+}
+
+/* Poll until FPGA is ready to be accessed or timeout occurred */
+int fpgamgr_poll_fpga_ready(void)
+{
+	unsigned long i;
+
+	/* If FPGA is blank, wait till WD invoke warm reset */
+	for (i = 0; i < FPGA_TIMEOUT_CNT; i++) {
+		/* check for init done signal */
+		if (!is_fpgamgr_initdone_high())
+			continue;
+		/* check again to avoid false glitches */
+		if (!is_fpgamgr_initdone_high())
+			continue;
+		return 1;
+	}
+
+	return 0;
+}
+
 /* Set CD ratio */
 static void fpgamgr_set_cd_ratio(unsigned long ratio)
 {
-- 
2.2.0

[U-Boot] [PATCH v7 6/6] arm: socfpga: Add FPGA driver support for Arria 10

[tien.fong.chee at intel.com]

From: Tien Fong Chee <tien.fong.chee@intel.com>

Add FPGA driver support for Arria 10.

Signed-off-by: Tien Fong Chee <tien.fong.chee@intel.com>
---
 arch/arm/mach-socfpga/include/mach/fpga_manager.h  |   2 +
 .../include/mach/fpga_manager_arria10.h            | 100 +++++
 drivers/fpga/Makefile                              |   1 +
 drivers/fpga/socfpga_arria10.c                     | 479 +++++++++++++++++++++
 include/configs/socfpga_common.h                   |   3 +-
 5 files changed, 583 insertions(+), 2 deletions(-)
 create mode 100644 arch/arm/mach-socfpga/include/mach/fpga_manager_arria10.h
 create mode 100644 drivers/fpga/socfpga_arria10.c

diff --git a/arch/arm/mach-socfpga/include/mach/fpga_manager.h b/arch/arm/mach-socfpga/include/mach/fpga_manager.h
index b046c2c..a21c716 100644
--- a/arch/arm/mach-socfpga/include/mach/fpga_manager.h
+++ b/arch/arm/mach-socfpga/include/mach/fpga_manager.h
@@ -12,6 +12,8 @@
 
 #if defined(CONFIG_TARGET_SOCFPGA_GEN5)
 #include <asm/arch/fpga_manager_gen5.h>
+#elif defined(CONFIG_TARGET_SOCFPGA_ARRIA10)
+#include <asm/arch/fpga_manager_arria10.h>
 #endif
 
 /* FPGA CD Ratio Value */
diff --git a/arch/arm/mach-socfpga/include/mach/fpga_manager_arria10.h b/arch/arm/mach-socfpga/include/mach/fpga_manager_arria10.h
new file mode 100644
index 0000000..9cbf696
--- /dev/null
+++ b/arch/arm/mach-socfpga/include/mach/fpga_manager_arria10.h
@@ -0,0 +1,100 @@
+/*
+ * Copyright (C) 2017 Intel Corporation <www.intel.com>
+ * All rights reserved.
+ *
+ * SPDX-License-Identifier:    GPL-2.0
+ */
+
+#ifndef _FPGA_MANAGER_ARRIA10_H_
+#define _FPGA_MANAGER_ARRIA10_H_
+
+#define ALT_FPGAMGR_IMGCFG_STAT_F2S_CRC_ERROR_SET_MSK		BIT(0)
+#define ALT_FPGAMGR_IMGCFG_STAT_F2S_EARLY_USERMODE_SET_MSK	BIT(1)
+#define ALT_FPGAMGR_IMGCFG_STAT_F2S_USERMODE_SET_MSK 		BIT(2)
+#define ALT_FPGAMGR_IMGCFG_STAT_F2S_INITDONE_OE_SET_MSK 	BIT(3)
+#define ALT_FPGAMGR_IMGCFG_STAT_F2S_NSTATUS_PIN_SET_MSK		BIT(4)
+#define ALT_FPGAMGR_IMGCFG_STAT_F2S_NSTATUS_OE_SET_MSK		BIT(5)
+#define ALT_FPGAMGR_IMGCFG_STAT_F2S_CONDONE_PIN_SET_MSK		BIT(6)
+#define ALT_FPGAMGR_IMGCFG_STAT_F2S_CONDONE_OE_SET_MSK		BIT(7)
+#define ALT_FPGAMGR_IMGCFG_STAT_F2S_CVP_CONF_DONE_SET_MSK	BIT(8)
+#define ALT_FPGAMGR_IMGCFG_STAT_F2S_PR_READY_SET_MSK		BIT(9)
+#define ALT_FPGAMGR_IMGCFG_STAT_F2S_PR_DONE_SET_MSK		BIT(10)
+#define ALT_FPGAMGR_IMGCFG_STAT_F2S_PR_ERROR_SET_MSK		BIT(11)
+#define ALT_FPGAMGR_IMGCFG_STAT_F2S_NCONFIG_PIN_SET_MSK		BIT(12)
+#define ALT_FPGAMGR_IMGCFG_STAT_F2S_NCEO_OE_SET_MSK		BIT(13)
+#define ALT_FPGAMGR_IMGCFG_STAT_F2S_MSEL0_SET_MSK    		BIT(16)
+#define ALT_FPGAMGR_IMGCFG_STAT_F2S_MSEL1_SET_MSK    		BIT(17)
+#define ALT_FPGAMGR_IMGCFG_STAT_F2S_MSEL2_SET_MSK    		BIT(18)
+#define ALT_FPGAMGR_IMGCFG_STAT_F2S_MSEL_SET_MSD (\
+	ALT_FPGAMGR_IMGCFG_STAT_F2S_MSEL0_SET_MSK |\
+	ALT_FPGAMGR_IMGCFG_STAT_F2S_MSEL1_SET_MSK |\
+	ALT_FPGAMGR_IMGCFG_STAT_F2S_MSEL2_SET_MSK)
+#define ALT_FPGAMGR_IMGCFG_STAT_F2S_IMGCFG_FIFOEMPTY_SET_MSK	BIT(24)
+#define ALT_FPGAMGR_IMGCFG_STAT_F2S_IMGCFG_FIFOFULL_SET_MSK	BIT(25)
+#define ALT_FPGAMGR_IMGCFG_STAT_F2S_JTAGM_SET_MSK		BIT(28)
+#define ALT_FPGAMGR_IMGCFG_STAT_F2S_EMR_SET_MSK			BIT(29)
+#define ALT_FPGAMGR_IMGCFG_STAT_F2S_MSEL0_LSB			16
+
+#define ALT_FPGAMGR_IMGCFG_CTL_00_S2F_NENABLE_NCONFIG_SET_MSK	BIT(0)
+#define ALT_FPGAMGR_IMGCFG_CTL_00_S2F_NENABLE_NSTATUS_SET_MSK	BIT(1)
+#define ALT_FPGAMGR_IMGCFG_CTL_00_S2F_NENABLE_CONDONE_SET_MSK	BIT(2)
+#define ALT_FPGAMGR_IMGCFG_CTL_00_S2F_NCONFIG_SET_MSK		BIT(8)
+#define ALT_FPGAMGR_IMGCFG_CTL_00_S2F_NSTATUS_OE_SET_MSK	BIT(16)
+#define ALT_FPGAMGR_IMGCFG_CTL_00_S2F_CONDONE_OE_SET_MSK	BIT(24)
+
+#define ALT_FPGAMGR_IMGCFG_CTL_01_S2F_NENABLE_CONFIG_SET_MSK	BIT(0)
+#define ALT_FPGAMGR_IMGCFG_CTL_01_S2F_PR_REQUEST_SET_MSK	BIT(16)
+#define ALT_FPGAMGR_IMGCFG_CTL_01_S2F_NCE_SET_MSK		BIT(24)
+
+#define ALT_FPGAMGR_IMGCFG_CTL_02_EN_CFG_CTRL_SET_MSK    	BIT(0)
+#define ALT_FPGAMGR_IMGCFG_CTL_02_EN_CFG_DATA_SET_MSK    	BIT(8)
+#define ALT_FPGAMGR_IMGCFG_CTL_02_CDRATIO_SET_MSK    		0x00030000
+#define ALT_FPGAMGR_IMGCFG_CTL_02_CFGWIDTH_SET_MSK		BIT(24)
+#define ALT_FPGAMGR_IMGCFG_CTL_02_CDRATIO_LSB			16
+
+#ifndef __ASSEMBLY__
+
+struct socfpga_fpga_manager {
+	u32  _pad_0x0_0x7[2];
+	u32  dclkcnt;
+	u32  dclkstat;
+	u32  gpo;
+	u32  gpi;
+	u32  misci;
+	u32  _pad_0x1c_0x2f[5];
+	u32  emr_data0;
+	u32  emr_data1;
+	u32  emr_data2;
+	u32  emr_data3;
+	u32  emr_data4;
+	u32  emr_data5;
+	u32  emr_valid;
+	u32  emr_en;
+	u32  jtag_config;
+	u32  jtag_status;
+	u32  jtag_kick;
+	u32  _pad_0x5c_0x5f;
+	u32  jtag_data_w;
+	u32  jtag_data_r;
+	u32  _pad_0x68_0x6f[2];
+	u32  imgcfg_ctrl_00;
+	u32  imgcfg_ctrl_01;
+	u32  imgcfg_ctrl_02;
+	u32  _pad_0x7c_0x7f;
+	u32  imgcfg_stat;
+	u32  intr_masked_status;
+	u32  intr_mask;
+	u32  intr_polarity;
+	u32  dma_config;
+	u32  imgcfg_fifo_status;
+};
+
+/* Functions */
+int fpgamgr_program_init(u32 * rbf_data, size_t rbf_size);
+int fpgamgr_program_finish(void);
+int is_fpgamgr_user_mode(void);
+int fpgamgr_wait_early_user_mode(void);
+
+#endif /* __ASSEMBLY__ */
+
+#endif /* _FPGA_MANAGER_ARRIA10_H_ */
diff --git a/drivers/fpga/Makefile b/drivers/fpga/Makefile
index b65e5ba..08c9ff8 100644
--- a/drivers/fpga/Makefile
+++ b/drivers/fpga/Makefile
@@ -21,4 +21,5 @@ obj-$(CONFIG_FPGA_STRATIX_II) += stratixII.o
 obj-$(CONFIG_FPGA_STRATIX_V) += stratixv.o
 obj-$(CONFIG_FPGA_SOCFPGA) += socfpga.o
 obj-$(CONFIG_TARGET_SOCFPGA_GEN5) += socfpga_gen5.o
+obj-$(CONFIG_TARGET_SOCFPGA_ARRIA10) += socfpga_arria10.o
 endif
diff --git a/drivers/fpga/socfpga_arria10.c b/drivers/fpga/socfpga_arria10.c
new file mode 100644
index 0000000..5c717a8
--- /dev/null
+++ b/drivers/fpga/socfpga_arria10.c
@@ -0,0 +1,479 @@
+/*
+ * Copyright (C) 2017 Intel Corporation <www.intel.com>
+ *
+ * SPDX-License-Identifier:    GPL-2.0
+ */
+
+#include <asm/io.h>
+#include <asm/arch/fpga_manager.h>
+#include <asm/arch/reset_manager.h>
+#include <asm/arch/system_manager.h>
+#include <asm/arch/sdram.h>
+#include <asm/arch/misc.h>
+#include <altera.h>
+#include <common.h>
+#include <errno.h>
+#include <wait_bit.h>
+#include <watchdog.h>
+
+#define CFGWDTH_32	1
+#define MIN_BITSTREAM_SIZECHECK	230
+#define ENCRYPTION_OFFSET	69
+#define COMPRESSION_OFFSET	229
+#define FPGA_TIMEOUT_MSEC	1000  /* timeout in ms */
+#define FPGA_TIMEOUT_CNT	0x1000000
+
+DECLARE_GLOBAL_DATA_PTR;
+
+static const struct socfpga_fpga_manager *fpga_manager_base =
+		(void *)SOCFPGA_FPGAMGRREGS_ADDRESS;
+
+static const struct socfpga_system_manager *system_manager_base =
+		(void *)SOCFPGA_SYSMGR_ADDRESS;
+
+static void fpgamgr_set_cd_ratio(unsigned long ratio);
+
+static uint32_t fpgamgr_get_msel(void)
+{
+	u32 reg;
+
+	reg = readl(&fpga_manager_base->imgcfg_stat);
+	reg = (reg & ALT_FPGAMGR_IMGCFG_STAT_F2S_MSEL_SET_MSD) >>
+		ALT_FPGAMGR_IMGCFG_STAT_F2S_MSEL0_LSB;
+
+	return reg;
+}
+
+static void fpgamgr_set_cfgwdth(int width)
+{
+	if (width)
+		setbits_le32(&fpga_manager_base->imgcfg_ctrl_02,
+			ALT_FPGAMGR_IMGCFG_CTL_02_CFGWIDTH_SET_MSK);
+	else
+		clrbits_le32(&fpga_manager_base->imgcfg_ctrl_02,
+			ALT_FPGAMGR_IMGCFG_CTL_02_CFGWIDTH_SET_MSK);
+}
+
+int is_fpgamgr_user_mode(void)
+{
+	return (readl(&fpga_manager_base->imgcfg_stat) &
+		ALT_FPGAMGR_IMGCFG_STAT_F2S_USERMODE_SET_MSK) != 0;
+}
+
+static int wait_for_user_mode(void)
+{
+	return wait_for_bit(__func__,
+		&fpga_manager_base->imgcfg_stat,
+		ALT_FPGAMGR_IMGCFG_STAT_F2S_USERMODE_SET_MSK,
+		1, FPGA_TIMEOUT_MSEC, false);
+}
+
+static int is_fpgamgr_early_user_mode(void)
+{
+	return (readl(&fpga_manager_base->imgcfg_stat) &
+		ALT_FPGAMGR_IMGCFG_STAT_F2S_EARLY_USERMODE_SET_MSK) != 0;
+}
+
+int fpgamgr_wait_early_user_mode(void)
+{
+	u32 sync_data = 0xffffffff;
+	u32 i = 0;
+	unsigned start = get_timer(0);
+	unsigned long cd_ratio;
+
+	/* Getting existing CDRATIO */
+	cd_ratio = (readl(&fpga_manager_base->imgcfg_ctrl_02) &
+		ALT_FPGAMGR_IMGCFG_CTL_02_CDRATIO_SET_MSK) >>
+		ALT_FPGAMGR_IMGCFG_CTL_02_CDRATIO_LSB;
+
+	/* Using CDRATIO_X1 for better compatibility */
+	fpgamgr_set_cd_ratio(CDRATIO_x1);
+
+	while (!(is_fpgamgr_early_user_mode())) {
+		if (get_timer(start) > FPGA_TIMEOUT_MSEC)
+			return -ETIMEDOUT;
+		fpgamgr_program_write((const long unsigned int *)&sync_data,
+				sizeof(sync_data));
+		udelay(FPGA_TIMEOUT_MSEC);
+		i++;
+	}
+
+	debug("Additional %i sync word needed\n", i);
+
+	/* restoring original CDRATIO */
+	fpgamgr_set_cd_ratio(cd_ratio);
+
+	return 0;
+}
+
+/* Read f2s_nconfig_pin and f2s_nstatus_pin; loop until de-asserted */
+static int wait_for_nconfig_pin_and_nstatus_pin(void)
+{
+	unsigned long mask = ALT_FPGAMGR_IMGCFG_STAT_F2S_NCONFIG_PIN_SET_MSK |
+				ALT_FPGAMGR_IMGCFG_STAT_F2S_NSTATUS_PIN_SET_MSK;
+
+	/* Poll until f2s_nconfig_pin and f2s_nstatus_pin; loop until de-asserted,
+	 * timeout at 1000ms
+	 */
+	return wait_for_bit(__func__,
+			    &fpga_manager_base->imgcfg_stat,
+			    mask,
+			    false, FPGA_TIMEOUT_MSEC, false);
+}
+
+static int wait_for_f2s_nstatus_pin(unsigned long value)
+{
+	/* Poll until f2s to specific value, timeout at 1000ms */
+	return wait_for_bit(__func__,
+			    &fpga_manager_base->imgcfg_stat,
+			    ALT_FPGAMGR_IMGCFG_STAT_F2S_NSTATUS_PIN_SET_MSK,
+			    value, FPGA_TIMEOUT_MSEC, false);
+}
+
+/* set CD ratio */
+static void fpgamgr_set_cd_ratio(unsigned long ratio)
+{
+	clrbits_le32(&fpga_manager_base->imgcfg_ctrl_02,
+		ALT_FPGAMGR_IMGCFG_CTL_02_CDRATIO_SET_MSK);
+
+	setbits_le32(&fpga_manager_base->imgcfg_ctrl_02,
+		(ratio << ALT_FPGAMGR_IMGCFG_CTL_02_CDRATIO_LSB) &
+		ALT_FPGAMGR_IMGCFG_CTL_02_CDRATIO_SET_MSK);
+}
+
+/* get the MSEL value, verify we are set for FPP configuration mode */
+static int fpgamgr_verify_msel(void)
+{
+	u32 msel = fpgamgr_get_msel();
+
+	if ((msel != 0) && (msel != 1)) {
+		printf("Fail: read msel=%d\n", msel);
+		return -EPERM;
+	}
+
+	return 0;
+}
+
+/*
+ * Write cdratio and cdwidth based on whether the bitstream is compressed
+ * and/or encoded
+ */
+static int fpgamgr_set_cdratio_cdwidth(unsigned int cfg_width, u32 *rbf_data,
+				       size_t rbf_size)
+{
+	unsigned int cd_ratio;
+	bool encrypt, compress;
+
+	/*
+         * According to the bitstream specification,
+	 * both encryption and compression status are
+         * in location before offset 230 of the buffer.
+         */
+	if (rbf_size < MIN_BITSTREAM_SIZECHECK)
+		return -EINVAL;
+
+	encrypt = (rbf_data[ENCRYPTION_OFFSET] >> 2) & 3;
+	encrypt = encrypt != 0;
+
+	compress = (rbf_data[COMPRESSION_OFFSET] >> 1) & 1;
+	compress = !compress;
+
+	debug("header word %d = %08x\n", 69, rbf_data[69]);
+	debug("header word %d = %08x\n", 229, rbf_data[229]);
+	debug("read from rbf header: encrypt=%d compress=%d\n", encrypt, compress);
+
+	/*
+	 * from the register map description of cdratio in imgcfg_ctrl_02:
+	 *  Normal Configuration    : 32bit Passive Parallel
+	 *  Partial Reconfiguration : 16bit Passive Parallel
+	 */
+
+	/*
+	 * cd ratio is dependent on cfg width and whether the bitstream
+	 * is encrypted and/or compressed.
+	 *
+	 * | width | encr. | compr. | cd ratio |
+	 * |  16   |   0   |   0    |     1    |
+	 * |  16   |   0   |   1    |     4    |
+	 * |  16   |   1   |   0    |     2    |
+	 * |  16   |   1   |   1    |     4    |
+	 * |  32   |   0   |   0    |     1    |
+	 * |  32   |   0   |   1    |     8    |
+	 * |  32   |   1   |   0    |     4    |
+	 * |  32   |   1   |   1    |     8    |
+	 */
+	if (!compress && !encrypt) {
+		cd_ratio = CDRATIO_x1;
+	} else {
+		if (compress)
+			cd_ratio = CDRATIO_x4;
+		else
+			cd_ratio = CDRATIO_x2;
+
+		/* if 32 bit, double the cd ratio (so register
+		   field setting is incremented) */
+		if (cfg_width == CFGWDTH_32)
+			cd_ratio += 1;
+	}
+
+	fpgamgr_set_cfgwdth(cfg_width);
+	fpgamgr_set_cd_ratio(cd_ratio);
+
+	return 0;
+}
+
+static int fpgamgr_reset(void)
+{
+	unsigned long reg;
+
+	/* S2F_NCONFIG = 0 */
+	clrbits_le32(&fpga_manager_base->imgcfg_ctrl_00,
+		ALT_FPGAMGR_IMGCFG_CTL_00_S2F_NCONFIG_SET_MSK);
+
+	/* Wait for f2s_nstatus == 0 */
+	if (wait_for_f2s_nstatus_pin(0))
+		return -ETIME;
+
+	/* S2F_NCONFIG = 1 */
+	setbits_le32(&fpga_manager_base->imgcfg_ctrl_00,
+		ALT_FPGAMGR_IMGCFG_CTL_00_S2F_NCONFIG_SET_MSK);
+
+	/* Wait for f2s_nstatus == 1 */
+	if (wait_for_f2s_nstatus_pin(1))
+		return -ETIME;
+
+	/* read and confirm f2s_condone_pin = 0 and f2s_condone_oe = 1 */
+	reg = readl(&fpga_manager_base->imgcfg_stat);
+	if ((reg & ALT_FPGAMGR_IMGCFG_STAT_F2S_CONDONE_PIN_SET_MSK) != 0)
+		return -EPERM;
+
+	if ((reg & ALT_FPGAMGR_IMGCFG_STAT_F2S_CONDONE_OE_SET_MSK) == 0)
+		return -EPERM;
+
+	return 0;
+}
+
+/* Start the FPGA programming by initialize the FPGA Manager */
+int fpgamgr_program_init(u32 * rbf_data, size_t rbf_size)
+{
+	int ret;
+
+	/* Step 1 */
+	if (fpgamgr_verify_msel())
+		return -EPERM;
+
+	/* Step 2 */
+	if (fpgamgr_set_cdratio_cdwidth(CFGWDTH_32, rbf_data, rbf_size))
+		return -EPERM;
+
+	/*
+	 * Step 3:
+	 * Make sure no other external devices are trying to interfere with
+	 * programming:
+	 */
+	if (wait_for_nconfig_pin_and_nstatus_pin())
+		return -ETIME;
+
+	/*
+	 * Step 4:
+	 * Deassert the signal drives from HPS
+	 *
+	 * S2F_NCE = 1
+	 * S2F_PR_REQUEST = 0
+	 * EN_CFG_CTRL = 0
+	 * EN_CFG_DATA = 0
+	 * S2F_NCONFIG = 1
+	 * S2F_NSTATUS_OE = 0
+	 * S2F_CONDONE_OE = 0
+	 */
+	setbits_le32(&fpga_manager_base->imgcfg_ctrl_01,
+		ALT_FPGAMGR_IMGCFG_CTL_01_S2F_NCE_SET_MSK);
+
+	clrbits_le32(&fpga_manager_base->imgcfg_ctrl_01,
+		ALT_FPGAMGR_IMGCFG_CTL_01_S2F_PR_REQUEST_SET_MSK);
+
+	clrbits_le32(&fpga_manager_base->imgcfg_ctrl_02,
+		ALT_FPGAMGR_IMGCFG_CTL_02_EN_CFG_DATA_SET_MSK |
+		ALT_FPGAMGR_IMGCFG_CTL_02_EN_CFG_CTRL_SET_MSK);
+
+	setbits_le32(&fpga_manager_base->imgcfg_ctrl_00,
+		ALT_FPGAMGR_IMGCFG_CTL_00_S2F_NCONFIG_SET_MSK);
+
+	clrbits_le32(&fpga_manager_base->imgcfg_ctrl_00,
+		ALT_FPGAMGR_IMGCFG_CTL_00_S2F_NSTATUS_OE_SET_MSK |
+		ALT_FPGAMGR_IMGCFG_CTL_00_S2F_CONDONE_OE_SET_MSK);
+
+	/*
+	 * Step 5:
+	 * Enable overrides
+	 * S2F_NENABLE_CONFIG = 0
+	 * S2F_NENABLE_NCONFIG = 0
+	 */
+	clrbits_le32(&fpga_manager_base->imgcfg_ctrl_01,
+		ALT_FPGAMGR_IMGCFG_CTL_01_S2F_NENABLE_CONFIG_SET_MSK);
+	clrbits_le32(&fpga_manager_base->imgcfg_ctrl_00,
+		ALT_FPGAMGR_IMGCFG_CTL_00_S2F_NENABLE_NCONFIG_SET_MSK);
+
+	/*
+	 * Disable driving signals that HPS doesn't need to drive.
+	 * S2F_NENABLE_NSTATUS = 1
+	 * S2F_NENABLE_CONDONE = 1
+	 */
+	setbits_le32(&fpga_manager_base->imgcfg_ctrl_00,
+		ALT_FPGAMGR_IMGCFG_CTL_00_S2F_NENABLE_NSTATUS_SET_MSK |
+		ALT_FPGAMGR_IMGCFG_CTL_00_S2F_NENABLE_CONDONE_SET_MSK);
+
+	/*
+	 * Step 6:
+	 * Drive chip select S2F_NCE = 0
+	 */
+	 clrbits_le32(&fpga_manager_base->imgcfg_ctrl_01,
+		ALT_FPGAMGR_IMGCFG_CTL_01_S2F_NCE_SET_MSK);
+
+	/* Step 7 */
+	if (wait_for_nconfig_pin_and_nstatus_pin())
+		return -ETIME;
+
+	/* Step 8 */
+	ret = fpgamgr_reset();
+
+	if (ret)
+		return ret;
+
+	/*
+	 * Step 9:
+	 * EN_CFG_CTRL and EN_CFG_DATA = 1
+	 */
+	setbits_le32(&fpga_manager_base->imgcfg_ctrl_02,
+		ALT_FPGAMGR_IMGCFG_CTL_02_EN_CFG_DATA_SET_MSK |
+		ALT_FPGAMGR_IMGCFG_CTL_02_EN_CFG_CTRL_SET_MSK);
+
+	return 0;
+}
+
+/* Ensure the FPGA entering config done */
+static int fpgamgr_program_poll_cd(void)
+{
+	unsigned long reg, i;
+
+	for (i = 0; i < FPGA_TIMEOUT_CNT; i++) {
+		reg = readl(&fpga_manager_base->imgcfg_stat);
+		if (reg & ALT_FPGAMGR_IMGCFG_STAT_F2S_CONDONE_PIN_SET_MSK)
+			return 0;
+
+		if ((reg & ALT_FPGAMGR_IMGCFG_STAT_F2S_NSTATUS_PIN_SET_MSK) == 0) {
+			printf("nstatus == 0 while waiting for condone\n");
+			return -EPERM;
+		}
+	}
+
+	if (i == FPGA_TIMEOUT_CNT)
+		return -ETIME;
+
+	return 0;
+}
+
+/* Ensure the FPGA entering user mode */
+static int fpgamgr_program_poll_usermode(void)
+{
+	unsigned long reg;
+	int ret = 0;
+
+	if (fpgamgr_dclkcnt_set(0xf))
+		return -ETIME;
+
+	ret = wait_for_user_mode();
+	if (ret < 0) {
+		printf("%s: Failed to enter user mode with ", __func__);
+		printf("error code %d\n", ret);
+		return ret;
+	}
+
+	/*
+	 * Step 14:
+	 * Stop DATA path and Dclk
+	 * EN_CFG_CTRL and EN_CFG_DATA = 0
+	 */
+	clrbits_le32(&fpga_manager_base->imgcfg_ctrl_02,
+		ALT_FPGAMGR_IMGCFG_CTL_02_EN_CFG_DATA_SET_MSK |
+		ALT_FPGAMGR_IMGCFG_CTL_02_EN_CFG_CTRL_SET_MSK);
+
+	/*
+	 * Step 15:
+	 * Disable overrides
+	 * S2F_NENABLE_CONFIG = 1
+	 * S2F_NENABLE_NCONFIG = 1
+	 */
+	setbits_le32(&fpga_manager_base->imgcfg_ctrl_01,
+		ALT_FPGAMGR_IMGCFG_CTL_01_S2F_NENABLE_CONFIG_SET_MSK);
+	setbits_le32(&fpga_manager_base->imgcfg_ctrl_00,
+		ALT_FPGAMGR_IMGCFG_CTL_00_S2F_NENABLE_NCONFIG_SET_MSK);
+
+	/* Disable chip select S2F_NCE = 1 */
+	setbits_le32(&fpga_manager_base->imgcfg_ctrl_01,
+		ALT_FPGAMGR_IMGCFG_CTL_01_S2F_NCE_SET_MSK);
+
+	/*
+	 * Step 16:
+	 * Final check
+	 */
+	reg = readl(&fpga_manager_base->imgcfg_stat);
+	if (((reg & ALT_FPGAMGR_IMGCFG_STAT_F2S_USERMODE_SET_MSK) !=
+		ALT_FPGAMGR_IMGCFG_STAT_F2S_USERMODE_SET_MSK) ||
+	    ((reg & ALT_FPGAMGR_IMGCFG_STAT_F2S_CONDONE_PIN_SET_MSK) !=
+		ALT_FPGAMGR_IMGCFG_STAT_F2S_CONDONE_PIN_SET_MSK) ||
+	    ((reg & ALT_FPGAMGR_IMGCFG_STAT_F2S_NSTATUS_PIN_SET_MSK) !=
+		ALT_FPGAMGR_IMGCFG_STAT_F2S_NSTATUS_PIN_SET_MSK))
+		return -EPERM;
+
+	return 0;
+}
+
+int fpgamgr_program_finish(void)
+{
+	/* Ensure the FPGA entering config done */
+	int status = fpgamgr_program_poll_cd();
+
+	if (status) {
+		printf("FPGA: Poll CD failed with error code %d\n", status);
+		return -EPERM;
+	}
+	WATCHDOG_RESET();
+
+	/* Ensure the FPGA entering user mode */
+	status = fpgamgr_program_poll_usermode();
+	if (status) {
+		printf("FPGA: Poll usermode failed with error code %d\n",
+			status);
+		return -EPERM;
+	}
+
+	printf("Full Configuration Succeeded.\n");
+
+	return 0;
+}
+
+/*
+ * FPGA Manager to program the FPGA. This is the interface used by FPGA driver.
+ * Return 0 for sucess, non-zero for error.
+ */
+int socfpga_load(Altera_desc *desc, const void *rbf_data, size_t rbf_size)
+{
+	unsigned long status;
+
+	/* disable all signals from hps peripheral controller to fpga */
+	writel(0, &system_manager_base->fpgaintf_en_global);
+
+	/* disable all axi bridge (hps2fpga, lwhps2fpga & fpga2hps) */
+	socfpga_bridges_reset();
+
+	/* Initialize the FPGA Manager */
+	status = fpgamgr_program_init((u32 *)rbf_data, rbf_size);
+	if (status)
+		return status;
+
+	/* Write the RBF data to FPGA Manager */
+	fpgamgr_program_write(rbf_data, rbf_size);
+
+	return fpgamgr_program_finish();
+}
diff --git a/include/configs/socfpga_common.h b/include/configs/socfpga_common.h
index e74e7eb..9edcd2d 100644
--- a/include/configs/socfpga_common.h
+++ b/include/configs/socfpga_common.h
@@ -105,7 +105,6 @@
 /*
  * FPGA Driver
  */
-#ifdef CONFIG_TARGET_SOCFPGA_GEN5
 #ifdef CONFIG_CMD_FPGA
 #define CONFIG_FPGA
 #define CONFIG_FPGA_ALTERA
@@ -113,7 +112,7 @@
 #define CONFIG_SPL_FPGA_SUPPORT
 #define CONFIG_FPGA_COUNT		1
 #endif
-#endif
+
 /*
  * L4 OSC1 Timer 0
  */
-- 
2.2.0

[U-Boot] [PATCH v7 0/6] Add Intel Arria 10 SoC FPGA driver

[Dinh Nguyen]

On 05/28/2017 11:00 PM, tien.fong.chee at intel.com wrote:
> From: Tien Fong Chee <tien.fong.chee@intel.com>
> 
> This is the 6th version of patchset to adds support for Intel Arria 10 SoC FPGA
> driver. This version mainly resolved comments from Dinh in [v6].
> This series is working on top of u-boot.git - http://git.denx.de/u-boot.git.
> 
> [v5]: https://www.mail-archive.com/u-boot at lists.denx.de/msg250687.html
> 
> v6 -> v7 changes:
> -----------------
> - Changed commit header of patch 4/6 to more generic.
> 
> Patchset history
> ----------------
> [v1]: https://www.mail-archive.com/u-boot at lists.denx.de/msg247788.html
> [v2]: https://www.mail-archive.com/u-boot at lists.denx.de/msg248541.html
> [v3]: https://www.mail-archive.com/u-boot at lists.denx.de/msg249160.html
> [v4]: https://www.mail-archive.com/u-boot at lists.denx.de/msg250149.html
> [v5]: https://www.mail-archive.com/u-boot at lists.denx.de/msg250517.html
> 
> Tien Fong Chee (6):
>   arm: socfpga: Remove unused passing parameter of socfpga_bridges_reset
>   arm: socfpga: Restructure FPGA driver in the preparation to support
>     A10
>   arm: socfpga: Enable FPGA driver on SPL
>   drivers: Enable FPGA driver build on SPL
>   arm: socfpga: Move FPGA manager driver to FPGA driver
>   arm: socfpga: Add FPGA driver support for Arria 10
> 
>  arch/arm/mach-socfpga/Makefile                     |   1 -
>  arch/arm/mach-socfpga/fpga_manager.c               |  78 ----
>  arch/arm/mach-socfpga/include/mach/fpga_manager.h  |  70 +--
>  .../include/mach/fpga_manager_arria10.h            | 100 +++++
>  .../mach/{fpga_manager.h => fpga_manager_gen5.h}   |  69 ++-
>  .../include/mach/reset_manager_arria10.h           |   2 +-
>  arch/arm/mach-socfpga/reset_manager_arria10.c      |   4 +-
>  drivers/Makefile                                   |   1 +
>  drivers/fpga/Makefile                              |   2 +
>  drivers/fpga/socfpga.c                             | 241 +----------
>  drivers/fpga/socfpga_arria10.c                     | 479 +++++++++++++++++++++
>  drivers/fpga/{socfpga.c => socfpga_gen5.c}         |  98 ++---
>  include/configs/socfpga_common.h                   |   4 +-
>  13 files changed, 685 insertions(+), 464 deletions(-)
>  delete mode 100644 arch/arm/mach-socfpga/fpga_manager.c
>  create mode 100644 arch/arm/mach-socfpga/include/mach/fpga_manager_arria10.h
>  copy arch/arm/mach-socfpga/include/mach/{fpga_manager.h => fpga_manager_gen5.h} (57%)
>  create mode 100644 drivers/fpga/socfpga_arria10.c
>  copy drivers/fpga/{socfpga.c => socfpga_gen5.c} (85%)
> 

For the series,

Reviewed-by: Dinh Nguyen <dinguyen@kernel.org>

[U-Boot] [PATCH v7 0/6] Add Intel Arria 10 SoC FPGA driver

[Ley Foon Tan]

On Tue, 2017-05-30 at 08:48 -0500, Dinh Nguyen wrote:
> 
> On 05/28/2017 11:00 PM, tien.fong.chee at intel.com wrote:
> > 
> > From: Tien Fong Chee <tien.fong.chee@intel.com>
> > 
> > This is the 6th version of patchset to adds support for Intel Arria
> > 10 SoC FPGA
> > driver. This version mainly resolved comments from Dinh in [v6].
> > This series is working on top of u-boot.git - http://git.denx.de/u-
> > boot.git.
> > 
> > [v5]: https://www.mail-archive.com/u-boot at lists.denx.de/msg250687.h
> > tml
> > 
> > v6 -> v7 changes:
> > -----------------
> > - Changed commit header of patch 4/6 to more generic.
> > 
> > Patchset history
> > ----------------
> > [v1]: https://www.mail-archive.com/u-boot at lists.denx.de/msg247788.h
> > tml
> > [v2]: https://www.mail-archive.com/u-boot at lists.denx.de/msg248541.h
> > tml
> > [v3]: https://www.mail-archive.com/u-boot at lists.denx.de/msg249160.h
> > tml
> > [v4]: https://www.mail-archive.com/u-boot at lists.denx.de/msg250149.h
> > tml
> > [v5]: https://www.mail-archive.com/u-boot at lists.denx.de/msg250517.h
> > tml
> > 
> > Tien Fong Chee (6):
> >   arm: socfpga: Remove unused passing parameter of
> > socfpga_bridges_reset
> >   arm: socfpga: Restructure FPGA driver in the preparation to
> > support
> >     A10
> >   arm: socfpga: Enable FPGA driver on SPL
> >   drivers: Enable FPGA driver build on SPL
> >   arm: socfpga: Move FPGA manager driver to FPGA driver
> >   arm: socfpga: Add FPGA driver support for Arria 10
> > 
> >  arch/arm/mach-socfpga/Makefile                     |   1 -
> >  arch/arm/mach-socfpga/fpga_manager.c               |  78 ----
> >  arch/arm/mach-socfpga/include/mach/fpga_manager.h  |  70 +--
> >  .../include/mach/fpga_manager_arria10.h            | 100 +++++
> >  .../mach/{fpga_manager.h => fpga_manager_gen5.h}   |  69 ++-
> >  .../include/mach/reset_manager_arria10.h           |   2 +-
> >  arch/arm/mach-socfpga/reset_manager_arria10.c      |   4 +-
> >  drivers/Makefile                                   |   1 +
> >  drivers/fpga/Makefile                              |   2 +
> >  drivers/fpga/socfpga.c                             | 241 +------
> > ----
> >  drivers/fpga/socfpga_arria10.c                     | 479
> > +++++++++++++++++++++
> >  drivers/fpga/{socfpga.c => socfpga_gen5.c}         |  98 ++---
> >  include/configs/socfpga_common.h                   |   4 +-
> >  13 files changed, 685 insertions(+), 464 deletions(-)
> >  delete mode 100644 arch/arm/mach-socfpga/fpga_manager.c
> >  create mode 100644 arch/arm/mach-
> > socfpga/include/mach/fpga_manager_arria10.h
> >  copy arch/arm/mach-socfpga/include/mach/{fpga_manager.h =>
> > fpga_manager_gen5.h} (57%)
> >  create mode 100644 drivers/fpga/socfpga_arria10.c
> >  copy drivers/fpga/{socfpga.c => socfpga_gen5.c} (85%)
> > 
> For the series,
> 
> Reviewed-by: Dinh Nguyen <dinguyen@kernel.org>

Reviewed-by: Ley Foon Tan <ley.foon.tan@intel.com>


Thanks.
Ley Foon