* [PATCH v7 0/1] Broadcom Stingray SOC Initial Support
@ 2017-06-06 4:23 ` Anup Patel
0 siblings, 0 replies; 8+ messages in thread
From: Anup Patel @ 2017-06-06 4:23 UTC (permalink / raw)
To: Rob Herring, Mark Rutland, Michael Turquette, Stephen Boyd
Cc: Catalin Marinas, Will Deacon, Ray Jui, Scott Branden, Jon Mason,
Florian Fainelli, Oza Pawandeep, Srinath Mannam, Pramod Kumar,
Sandeep Tripathy, devicetree, linux-kernel, linux-clk,
linux-arm-kernel, bcm-kernel-feedback-list, Anup Patel
This patchset adds initial support of Broadcom Stingray SOC
by reusing existing Broadcom iProc device drivers.
Most of the patches in this patchset are DT patches except
the Stingray clock tree support which just one patch.
This patchset is based on Linux-4.12-rc4 and it is also available
at stingray-v7 branch of https://github.com/Broadcom/arm64-linux.git
Changes since v6:
- Rebased patches for Linux-4.12-rc3
- Dropped all patches except PATCH3 because these are
already applied in Broadcom tree
- Dropped __init usage in clk-sr driver
- Add tab indentation for sr_clk_dt_ids in clk-sr driver
- Made various clk init functions similar to platform probe function
in clk-sr driver
- Use of_device_get_match_data() instead of of_match_device()
in clk-sr driver
Changes since v5:
- Rebased patches for Linux-4.12-rc3
- Update DT node names to match register offset
Changes since v4:
- Reduce number of include headers in Stingray clk driver
Changes since v3:
- Rebased patches for Linux-4.12-rc1
- Updated PATCH3 to have all clocks except genpll3 to be
registered via platform driver probe
Changes since v2:
- Remove default bootargs from chosen DT node
- Remove "linux" prefix from stdout DT attribute of chosen DT node
- Remove use of GIC_CPU_MASK_xxx() for PPIs
Changes since v1:
- Rebased patches for Linux-4.12-rc1
- Removed unwanted /memreserve/ from bcm958742-base.dtsi
- Use ranges DT property to clear view of memory-layout
- Make bcm-sr.h part of clock DT bindings patch
Sandeep Tripathy (1):
clk: bcm: Add clocks for Stingray SOC
drivers/clk/bcm/Kconfig | 8 ++
drivers/clk/bcm/Makefile | 1 +
drivers/clk/bcm/clk-sr.c | 327 +++++++++++++++++++++++++++++++++++++++++++++++
3 files changed, 336 insertions(+)
create mode 100644 drivers/clk/bcm/clk-sr.c
--
2.7.4
^ permalink raw reply [flat|nested] 8+ messages in thread
* [PATCH v7 0/1] Broadcom Stingray SOC Initial Support
@ 2017-06-06 4:23 ` Anup Patel
0 siblings, 0 replies; 8+ messages in thread
From: Anup Patel @ 2017-06-06 4:23 UTC (permalink / raw)
To: linux-arm-kernel
This patchset adds initial support of Broadcom Stingray SOC
by reusing existing Broadcom iProc device drivers.
Most of the patches in this patchset are DT patches except
the Stingray clock tree support which just one patch.
This patchset is based on Linux-4.12-rc4 and it is also available
at stingray-v7 branch of https://github.com/Broadcom/arm64-linux.git
Changes since v6:
- Rebased patches for Linux-4.12-rc3
- Dropped all patches except PATCH3 because these are
already applied in Broadcom tree
- Dropped __init usage in clk-sr driver
- Add tab indentation for sr_clk_dt_ids in clk-sr driver
- Made various clk init functions similar to platform probe function
in clk-sr driver
- Use of_device_get_match_data() instead of of_match_device()
in clk-sr driver
Changes since v5:
- Rebased patches for Linux-4.12-rc3
- Update DT node names to match register offset
Changes since v4:
- Reduce number of include headers in Stingray clk driver
Changes since v3:
- Rebased patches for Linux-4.12-rc1
- Updated PATCH3 to have all clocks except genpll3 to be
registered via platform driver probe
Changes since v2:
- Remove default bootargs from chosen DT node
- Remove "linux" prefix from stdout DT attribute of chosen DT node
- Remove use of GIC_CPU_MASK_xxx() for PPIs
Changes since v1:
- Rebased patches for Linux-4.12-rc1
- Removed unwanted /memreserve/ from bcm958742-base.dtsi
- Use ranges DT property to clear view of memory-layout
- Make bcm-sr.h part of clock DT bindings patch
Sandeep Tripathy (1):
clk: bcm: Add clocks for Stingray SOC
drivers/clk/bcm/Kconfig | 8 ++
drivers/clk/bcm/Makefile | 1 +
drivers/clk/bcm/clk-sr.c | 327 +++++++++++++++++++++++++++++++++++++++++++++++
3 files changed, 336 insertions(+)
create mode 100644 drivers/clk/bcm/clk-sr.c
--
2.7.4
^ permalink raw reply [flat|nested] 8+ messages in thread
* [PATCH v7 1/1] clk: bcm: Add clocks for Stingray SOC
@ 2017-06-06 4:23 ` Anup Patel
0 siblings, 0 replies; 8+ messages in thread
From: Anup Patel @ 2017-06-06 4:23 UTC (permalink / raw)
To: Rob Herring, Mark Rutland, Michael Turquette, Stephen Boyd
Cc: Catalin Marinas, Will Deacon, Ray Jui, Scott Branden, Jon Mason,
Florian Fainelli, Oza Pawandeep, Srinath Mannam, Pramod Kumar,
Sandeep Tripathy, devicetree, linux-kernel, linux-clk,
linux-arm-kernel, bcm-kernel-feedback-list, Anup Patel
From: Sandeep Tripathy <sandeep.tripathy@broadcom.com>
This patch adds support for Stingray clocks in iproc
ccf. The Stingray SOC has various plls based on iproc
pll architecture.
Signed-off-by: Sandeep Tripathy <sandeep.tripathy@broadcom.com>
Signed-off-by: Anup Patel <anup.patel@broadcom.com>
Reviewed-by: Ray Jui <ray.jui@broadcom.com>
Reviewed-by: Scott Branden <scott.branden@broadcom.com>
---
drivers/clk/bcm/Kconfig | 8 ++
drivers/clk/bcm/Makefile | 1 +
drivers/clk/bcm/clk-sr.c | 327 +++++++++++++++++++++++++++++++++++++++++++++++
3 files changed, 336 insertions(+)
create mode 100644 drivers/clk/bcm/clk-sr.c
diff --git a/drivers/clk/bcm/Kconfig b/drivers/clk/bcm/Kconfig
index b5ae531..1d9187d 100644
--- a/drivers/clk/bcm/Kconfig
+++ b/drivers/clk/bcm/Kconfig
@@ -46,3 +46,11 @@ config CLK_BCM_NS2
default ARCH_BCM_IPROC
help
Enable common clock framework support for the Broadcom Northstar 2 SoC
+
+config CLK_BCM_SR
+ bool "Broadcom Stingray clock support"
+ depends on ARCH_BCM_IPROC || COMPILE_TEST
+ select COMMON_CLK_IPROC
+ default ARCH_BCM_IPROC
+ help
+ Enable common clock framework support for the Broadcom Stingray SoC
diff --git a/drivers/clk/bcm/Makefile b/drivers/clk/bcm/Makefile
index d9dc848..a0c14fa 100644
--- a/drivers/clk/bcm/Makefile
+++ b/drivers/clk/bcm/Makefile
@@ -10,3 +10,4 @@ obj-$(CONFIG_ARCH_BCM_53573) += clk-bcm53573-ilp.o
obj-$(CONFIG_CLK_BCM_CYGNUS) += clk-cygnus.o
obj-$(CONFIG_CLK_BCM_NSP) += clk-nsp.o
obj-$(CONFIG_CLK_BCM_NS2) += clk-ns2.o
+obj-$(CONFIG_CLK_BCM_SR) += clk-sr.o
diff --git a/drivers/clk/bcm/clk-sr.c b/drivers/clk/bcm/clk-sr.c
new file mode 100644
index 0000000..adc74f4
--- /dev/null
+++ b/drivers/clk/bcm/clk-sr.c
@@ -0,0 +1,327 @@
+/*
+ * Copyright 2017 Broadcom
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License, version 2, as
+ * published by the Free Software Foundation (the "GPL").
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License version 2 (GPLv2) for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * version 2 (GPLv2) along with this source code.
+ */
+
+#include <linux/err.h>
+#include <linux/clk-provider.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+
+#include <dt-bindings/clock/bcm-sr.h>
+#include "clk-iproc.h"
+
+#define REG_VAL(o, s, w) { .offset = o, .shift = s, .width = w, }
+
+#define AON_VAL(o, pw, ps, is) { .offset = o, .pwr_width = pw, \
+ .pwr_shift = ps, .iso_shift = is }
+
+#define SW_CTRL_VAL(o, s) { .offset = o, .shift = s, }
+
+#define RESET_VAL(o, rs, prs) { .offset = o, .reset_shift = rs, \
+ .p_reset_shift = prs }
+
+#define DF_VAL(o, kis, kiw, kps, kpw, kas, kaw) { .offset = o, \
+ .ki_shift = kis, .ki_width = kiw, .kp_shift = kps, .kp_width = kpw, \
+ .ka_shift = kas, .ka_width = kaw }
+
+#define VCO_CTRL_VAL(uo, lo) { .u_offset = uo, .l_offset = lo }
+
+#define ENABLE_VAL(o, es, hs, bs) { .offset = o, .enable_shift = es, \
+ .hold_shift = hs, .bypass_shift = bs }
+
+
+static const struct iproc_pll_ctrl sr_genpll0 = {
+ .flags = IPROC_CLK_AON | IPROC_CLK_PLL_HAS_NDIV_FRAC |
+ IPROC_CLK_PLL_NEEDS_SW_CFG,
+ .aon = AON_VAL(0x0, 5, 1, 0),
+ .reset = RESET_VAL(0x0, 12, 11),
+ .dig_filter = DF_VAL(0x0, 4, 3, 0, 4, 7, 3),
+ .sw_ctrl = SW_CTRL_VAL(0x10, 31),
+ .ndiv_int = REG_VAL(0x10, 20, 10),
+ .ndiv_frac = REG_VAL(0x10, 0, 20),
+ .pdiv = REG_VAL(0x14, 0, 4),
+ .status = REG_VAL(0x30, 12, 1),
+};
+
+static const struct iproc_clk_ctrl sr_genpll0_clk[] = {
+ [BCM_SR_GENPLL0_SATA_CLK] = {
+ .channel = BCM_SR_GENPLL0_SATA_CLK,
+ .flags = IPROC_CLK_AON,
+ .enable = ENABLE_VAL(0x4, 6, 0, 12),
+ .mdiv = REG_VAL(0x18, 0, 9),
+ },
+ [BCM_SR_GENPLL0_SCR_CLK] = {
+ .channel = BCM_SR_GENPLL0_SCR_CLK,
+ .flags = IPROC_CLK_AON,
+ .enable = ENABLE_VAL(0x4, 7, 1, 13),
+ .mdiv = REG_VAL(0x18, 10, 9),
+ },
+ [BCM_SR_GENPLL0_250M_CLK] = {
+ .channel = BCM_SR_GENPLL0_250M_CLK,
+ .flags = IPROC_CLK_AON,
+ .enable = ENABLE_VAL(0x4, 8, 2, 14),
+ .mdiv = REG_VAL(0x18, 20, 9),
+ },
+ [BCM_SR_GENPLL0_PCIE_AXI_CLK] = {
+ .channel = BCM_SR_GENPLL0_PCIE_AXI_CLK,
+ .flags = IPROC_CLK_AON,
+ .enable = ENABLE_VAL(0x4, 9, 3, 15),
+ .mdiv = REG_VAL(0x1c, 0, 9),
+ },
+ [BCM_SR_GENPLL0_PAXC_AXI_X2_CLK] = {
+ .channel = BCM_SR_GENPLL0_PAXC_AXI_X2_CLK,
+ .flags = IPROC_CLK_AON,
+ .enable = ENABLE_VAL(0x4, 10, 4, 16),
+ .mdiv = REG_VAL(0x1c, 10, 9),
+ },
+ [BCM_SR_GENPLL0_PAXC_AXI_CLK] = {
+ .channel = BCM_SR_GENPLL0_PAXC_AXI_CLK,
+ .flags = IPROC_CLK_AON,
+ .enable = ENABLE_VAL(0x4, 11, 5, 17),
+ .mdiv = REG_VAL(0x1c, 20, 9),
+ },
+};
+
+static int sr_genpll0_clk_init(struct platform_device *pdev)
+{
+ iproc_pll_clk_setup(pdev->dev.of_node,
+ &sr_genpll0, NULL, 0, sr_genpll0_clk,
+ ARRAY_SIZE(sr_genpll0_clk));
+ return 0;
+}
+
+static const struct iproc_pll_ctrl sr_genpll3 = {
+ .flags = IPROC_CLK_AON | IPROC_CLK_PLL_HAS_NDIV_FRAC |
+ IPROC_CLK_PLL_NEEDS_SW_CFG,
+ .aon = AON_VAL(0x0, 1, 19, 18),
+ .reset = RESET_VAL(0x0, 12, 11),
+ .dig_filter = DF_VAL(0x0, 4, 3, 0, 4, 7, 3),
+ .sw_ctrl = SW_CTRL_VAL(0x10, 31),
+ .ndiv_int = REG_VAL(0x10, 20, 10),
+ .ndiv_frac = REG_VAL(0x10, 0, 20),
+ .pdiv = REG_VAL(0x14, 0, 4),
+ .status = REG_VAL(0x30, 12, 1),
+};
+
+static const struct iproc_clk_ctrl sr_genpll3_clk[] = {
+ [BCM_SR_GENPLL3_HSLS_CLK] = {
+ .channel = BCM_SR_GENPLL3_HSLS_CLK,
+ .flags = IPROC_CLK_AON,
+ .enable = ENABLE_VAL(0x4, 6, 0, 12),
+ .mdiv = REG_VAL(0x18, 0, 9),
+ },
+ [BCM_SR_GENPLL3_SDIO_CLK] = {
+ .channel = BCM_SR_GENPLL3_SDIO_CLK,
+ .flags = IPROC_CLK_AON,
+ .enable = ENABLE_VAL(0x4, 7, 1, 13),
+ .mdiv = REG_VAL(0x18, 10, 9),
+ },
+};
+
+static void sr_genpll3_clk_init(struct device_node *node)
+{
+ iproc_pll_clk_setup(node, &sr_genpll3, NULL, 0, sr_genpll3_clk,
+ ARRAY_SIZE(sr_genpll3_clk));
+}
+CLK_OF_DECLARE(sr_genpll3_clk, "brcm,sr-genpll3", sr_genpll3_clk_init);
+
+static const struct iproc_pll_ctrl sr_genpll4 = {
+ .flags = IPROC_CLK_AON | IPROC_CLK_PLL_HAS_NDIV_FRAC |
+ IPROC_CLK_PLL_NEEDS_SW_CFG,
+ .aon = AON_VAL(0x0, 1, 25, 24),
+ .reset = RESET_VAL(0x0, 12, 11),
+ .dig_filter = DF_VAL(0x0, 4, 3, 0, 4, 7, 3),
+ .sw_ctrl = SW_CTRL_VAL(0x10, 31),
+ .ndiv_int = REG_VAL(0x10, 20, 10),
+ .ndiv_frac = REG_VAL(0x10, 0, 20),
+ .pdiv = REG_VAL(0x14, 0, 4),
+ .status = REG_VAL(0x30, 12, 1),
+};
+
+static const struct iproc_clk_ctrl sr_genpll4_clk[] = {
+ [BCM_SR_GENPLL4_CCN_CLK] = {
+ .channel = BCM_SR_GENPLL4_CCN_CLK,
+ .flags = IPROC_CLK_AON,
+ .enable = ENABLE_VAL(0x4, 6, 0, 12),
+ .mdiv = REG_VAL(0x18, 0, 9),
+ },
+};
+
+static int sr_genpll4_clk_init(struct platform_device *pdev)
+{
+ iproc_pll_clk_setup(pdev->dev.of_node,
+ &sr_genpll4, NULL, 0, sr_genpll4_clk,
+ ARRAY_SIZE(sr_genpll4_clk));
+ return 0;
+}
+
+static const struct iproc_pll_ctrl sr_genpll5 = {
+ .flags = IPROC_CLK_AON | IPROC_CLK_PLL_HAS_NDIV_FRAC |
+ IPROC_CLK_PLL_NEEDS_SW_CFG,
+ .aon = AON_VAL(0x0, 1, 1, 0),
+ .reset = RESET_VAL(0x0, 12, 11),
+ .dig_filter = DF_VAL(0x0, 4, 3, 0, 4, 7, 3),
+ .sw_ctrl = SW_CTRL_VAL(0x10, 31),
+ .ndiv_int = REG_VAL(0x10, 20, 10),
+ .ndiv_frac = REG_VAL(0x10, 0, 20),
+ .pdiv = REG_VAL(0x14, 0, 4),
+ .status = REG_VAL(0x30, 12, 1),
+};
+
+static const struct iproc_clk_ctrl sr_genpll5_clk[] = {
+ [BCM_SR_GENPLL5_FS_CLK] = {
+ .channel = BCM_SR_GENPLL5_FS_CLK,
+ .flags = IPROC_CLK_AON,
+ .enable = ENABLE_VAL(0x4, 6, 0, 12),
+ .mdiv = REG_VAL(0x18, 0, 9),
+ },
+ [BCM_SR_GENPLL5_SPU_CLK] = {
+ .channel = BCM_SR_GENPLL5_SPU_CLK,
+ .flags = IPROC_CLK_AON,
+ .enable = ENABLE_VAL(0x4, 6, 0, 12),
+ .mdiv = REG_VAL(0x18, 10, 9),
+ },
+};
+
+static int sr_genpll5_clk_init(struct platform_device *pdev)
+{
+ iproc_pll_clk_setup(pdev->dev.of_node,
+ &sr_genpll5, NULL, 0, sr_genpll5_clk,
+ ARRAY_SIZE(sr_genpll5_clk));
+ return 0;
+}
+
+static const struct iproc_pll_ctrl sr_lcpll0 = {
+ .flags = IPROC_CLK_AON | IPROC_CLK_PLL_NEEDS_SW_CFG,
+ .aon = AON_VAL(0x0, 2, 19, 18),
+ .reset = RESET_VAL(0x0, 31, 30),
+ .sw_ctrl = SW_CTRL_VAL(0x4, 31),
+ .ndiv_int = REG_VAL(0x4, 16, 10),
+ .pdiv = REG_VAL(0x4, 26, 4),
+ .status = REG_VAL(0x38, 12, 1),
+};
+
+static const struct iproc_clk_ctrl sr_lcpll0_clk[] = {
+ [BCM_SR_LCPLL0_SATA_REF_CLK] = {
+ .channel = BCM_SR_LCPLL0_SATA_REF_CLK,
+ .flags = IPROC_CLK_AON,
+ .enable = ENABLE_VAL(0x0, 7, 1, 13),
+ .mdiv = REG_VAL(0x14, 0, 9),
+ },
+ [BCM_SR_LCPLL0_USB_REF_CLK] = {
+ .channel = BCM_SR_LCPLL0_USB_REF_CLK,
+ .flags = IPROC_CLK_AON,
+ .enable = ENABLE_VAL(0x0, 8, 2, 14),
+ .mdiv = REG_VAL(0x14, 10, 9),
+ },
+ [BCM_SR_LCPLL0_SATA_REFPN_CLK] = {
+ .channel = BCM_SR_LCPLL0_SATA_REFPN_CLK,
+ .flags = IPROC_CLK_AON,
+ .enable = ENABLE_VAL(0x0, 9, 3, 15),
+ .mdiv = REG_VAL(0x14, 20, 9),
+ },
+};
+
+static int sr_lcpll0_clk_init(struct platform_device *pdev)
+{
+ iproc_pll_clk_setup(pdev->dev.of_node,
+ &sr_lcpll0, NULL, 0, sr_lcpll0_clk,
+ ARRAY_SIZE(sr_lcpll0_clk));
+ return 0;
+}
+
+static const struct iproc_pll_ctrl sr_lcpll1 = {
+ .flags = IPROC_CLK_AON | IPROC_CLK_PLL_NEEDS_SW_CFG,
+ .aon = AON_VAL(0x0, 2, 22, 21),
+ .reset = RESET_VAL(0x0, 31, 30),
+ .sw_ctrl = SW_CTRL_VAL(0x4, 31),
+ .ndiv_int = REG_VAL(0x4, 16, 10),
+ .pdiv = REG_VAL(0x4, 26, 4),
+ .status = REG_VAL(0x38, 12, 1),
+};
+
+static const struct iproc_clk_ctrl sr_lcpll1_clk[] = {
+ [BCM_SR_LCPLL1_WAN_CLK] = {
+ .channel = BCM_SR_LCPLL1_WAN_CLK,
+ .flags = IPROC_CLK_AON,
+ .enable = ENABLE_VAL(0x0, 7, 1, 13),
+ .mdiv = REG_VAL(0x14, 0, 9),
+ },
+};
+
+static int sr_lcpll1_clk_init(struct platform_device *pdev)
+{
+ iproc_pll_clk_setup(pdev->dev.of_node,
+ &sr_lcpll1, NULL, 0, sr_lcpll1_clk,
+ ARRAY_SIZE(sr_lcpll1_clk));
+ return 0;
+}
+
+static const struct iproc_pll_ctrl sr_lcpll_pcie = {
+ .flags = IPROC_CLK_AON | IPROC_CLK_PLL_NEEDS_SW_CFG,
+ .aon = AON_VAL(0x0, 2, 25, 24),
+ .reset = RESET_VAL(0x0, 31, 30),
+ .sw_ctrl = SW_CTRL_VAL(0x4, 31),
+ .ndiv_int = REG_VAL(0x4, 16, 10),
+ .pdiv = REG_VAL(0x4, 26, 4),
+ .status = REG_VAL(0x38, 12, 1),
+};
+
+static const struct iproc_clk_ctrl sr_lcpll_pcie_clk[] = {
+ [BCM_SR_LCPLL_PCIE_PHY_REF_CLK] = {
+ .channel = BCM_SR_LCPLL_PCIE_PHY_REF_CLK,
+ .flags = IPROC_CLK_AON,
+ .enable = ENABLE_VAL(0x0, 7, 1, 13),
+ .mdiv = REG_VAL(0x14, 0, 9),
+ },
+};
+
+static int sr_lcpll_pcie_clk_init(struct platform_device *pdev)
+{
+ iproc_pll_clk_setup(pdev->dev.of_node,
+ &sr_lcpll_pcie, NULL, 0, sr_lcpll_pcie_clk,
+ ARRAY_SIZE(sr_lcpll_pcie_clk));
+ return 0;
+}
+
+static const struct of_device_id sr_clk_dt_ids[] = {
+ { .compatible = "brcm,sr-genpll0", .data = sr_genpll0_clk_init },
+ { .compatible = "brcm,sr-genpll4", .data = sr_genpll4_clk_init },
+ { .compatible = "brcm,sr-genpll5", .data = sr_genpll5_clk_init },
+ { .compatible = "brcm,sr-lcpll0", .data = sr_lcpll0_clk_init },
+ { .compatible = "brcm,sr-lcpll1", .data = sr_lcpll1_clk_init },
+ { .compatible = "brcm,sr-lcpll-pcie", .data = sr_lcpll_pcie_clk_init },
+ { /* sentinel */ }
+};
+
+static int sr_clk_probe(struct platform_device *pdev)
+{
+ int (*probe_func)(struct platform_device *);
+
+ probe_func = of_device_get_match_data(&pdev->dev);
+ if (!probe_func)
+ return -ENODEV;
+
+ return probe_func(pdev);
+}
+
+static struct platform_driver sr_clk_driver = {
+ .driver = {
+ .name = "sr-clk",
+ .of_match_table = sr_clk_dt_ids,
+ },
+ .probe = sr_clk_probe,
+};
+builtin_platform_driver(sr_clk_driver);
--
2.7.4
^ permalink raw reply related [flat|nested] 8+ messages in thread
* [PATCH v7 1/1] clk: bcm: Add clocks for Stingray SOC
@ 2017-06-06 4:23 ` Anup Patel
0 siblings, 0 replies; 8+ messages in thread
From: Anup Patel @ 2017-06-06 4:23 UTC (permalink / raw)
To: Rob Herring, Mark Rutland, Michael Turquette, Stephen Boyd
Cc: Catalin Marinas, Will Deacon, Ray Jui, Scott Branden, Jon Mason,
Florian Fainelli, Oza Pawandeep, Srinath Mannam, Pramod Kumar,
Sandeep Tripathy, devicetree-u79uwXL29TY76Z2rM5mHXA,
linux-kernel-u79uwXL29TY76Z2rM5mHXA,
linux-clk-u79uwXL29TY76Z2rM5mHXA,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
bcm-kernel-feedback-list-dY08KVG/lbpWk0Htik3J/w, Anup Patel
From: Sandeep Tripathy <sandeep.tripathy-dY08KVG/lbpWk0Htik3J/w@public.gmane.org>
This patch adds support for Stingray clocks in iproc
ccf. The Stingray SOC has various plls based on iproc
pll architecture.
Signed-off-by: Sandeep Tripathy <sandeep.tripathy-dY08KVG/lbpWk0Htik3J/w@public.gmane.org>
Signed-off-by: Anup Patel <anup.patel-dY08KVG/lbpWk0Htik3J/w@public.gmane.org>
Reviewed-by: Ray Jui <ray.jui-dY08KVG/lbpWk0Htik3J/w@public.gmane.org>
Reviewed-by: Scott Branden <scott.branden-dY08KVG/lbpWk0Htik3J/w@public.gmane.org>
---
drivers/clk/bcm/Kconfig | 8 ++
drivers/clk/bcm/Makefile | 1 +
drivers/clk/bcm/clk-sr.c | 327 +++++++++++++++++++++++++++++++++++++++++++++++
3 files changed, 336 insertions(+)
create mode 100644 drivers/clk/bcm/clk-sr.c
diff --git a/drivers/clk/bcm/Kconfig b/drivers/clk/bcm/Kconfig
index b5ae531..1d9187d 100644
--- a/drivers/clk/bcm/Kconfig
+++ b/drivers/clk/bcm/Kconfig
@@ -46,3 +46,11 @@ config CLK_BCM_NS2
default ARCH_BCM_IPROC
help
Enable common clock framework support for the Broadcom Northstar 2 SoC
+
+config CLK_BCM_SR
+ bool "Broadcom Stingray clock support"
+ depends on ARCH_BCM_IPROC || COMPILE_TEST
+ select COMMON_CLK_IPROC
+ default ARCH_BCM_IPROC
+ help
+ Enable common clock framework support for the Broadcom Stingray SoC
diff --git a/drivers/clk/bcm/Makefile b/drivers/clk/bcm/Makefile
index d9dc848..a0c14fa 100644
--- a/drivers/clk/bcm/Makefile
+++ b/drivers/clk/bcm/Makefile
@@ -10,3 +10,4 @@ obj-$(CONFIG_ARCH_BCM_53573) += clk-bcm53573-ilp.o
obj-$(CONFIG_CLK_BCM_CYGNUS) += clk-cygnus.o
obj-$(CONFIG_CLK_BCM_NSP) += clk-nsp.o
obj-$(CONFIG_CLK_BCM_NS2) += clk-ns2.o
+obj-$(CONFIG_CLK_BCM_SR) += clk-sr.o
diff --git a/drivers/clk/bcm/clk-sr.c b/drivers/clk/bcm/clk-sr.c
new file mode 100644
index 0000000..adc74f4
--- /dev/null
+++ b/drivers/clk/bcm/clk-sr.c
@@ -0,0 +1,327 @@
+/*
+ * Copyright 2017 Broadcom
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License, version 2, as
+ * published by the Free Software Foundation (the "GPL").
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License version 2 (GPLv2) for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * version 2 (GPLv2) along with this source code.
+ */
+
+#include <linux/err.h>
+#include <linux/clk-provider.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+
+#include <dt-bindings/clock/bcm-sr.h>
+#include "clk-iproc.h"
+
+#define REG_VAL(o, s, w) { .offset = o, .shift = s, .width = w, }
+
+#define AON_VAL(o, pw, ps, is) { .offset = o, .pwr_width = pw, \
+ .pwr_shift = ps, .iso_shift = is }
+
+#define SW_CTRL_VAL(o, s) { .offset = o, .shift = s, }
+
+#define RESET_VAL(o, rs, prs) { .offset = o, .reset_shift = rs, \
+ .p_reset_shift = prs }
+
+#define DF_VAL(o, kis, kiw, kps, kpw, kas, kaw) { .offset = o, \
+ .ki_shift = kis, .ki_width = kiw, .kp_shift = kps, .kp_width = kpw, \
+ .ka_shift = kas, .ka_width = kaw }
+
+#define VCO_CTRL_VAL(uo, lo) { .u_offset = uo, .l_offset = lo }
+
+#define ENABLE_VAL(o, es, hs, bs) { .offset = o, .enable_shift = es, \
+ .hold_shift = hs, .bypass_shift = bs }
+
+
+static const struct iproc_pll_ctrl sr_genpll0 = {
+ .flags = IPROC_CLK_AON | IPROC_CLK_PLL_HAS_NDIV_FRAC |
+ IPROC_CLK_PLL_NEEDS_SW_CFG,
+ .aon = AON_VAL(0x0, 5, 1, 0),
+ .reset = RESET_VAL(0x0, 12, 11),
+ .dig_filter = DF_VAL(0x0, 4, 3, 0, 4, 7, 3),
+ .sw_ctrl = SW_CTRL_VAL(0x10, 31),
+ .ndiv_int = REG_VAL(0x10, 20, 10),
+ .ndiv_frac = REG_VAL(0x10, 0, 20),
+ .pdiv = REG_VAL(0x14, 0, 4),
+ .status = REG_VAL(0x30, 12, 1),
+};
+
+static const struct iproc_clk_ctrl sr_genpll0_clk[] = {
+ [BCM_SR_GENPLL0_SATA_CLK] = {
+ .channel = BCM_SR_GENPLL0_SATA_CLK,
+ .flags = IPROC_CLK_AON,
+ .enable = ENABLE_VAL(0x4, 6, 0, 12),
+ .mdiv = REG_VAL(0x18, 0, 9),
+ },
+ [BCM_SR_GENPLL0_SCR_CLK] = {
+ .channel = BCM_SR_GENPLL0_SCR_CLK,
+ .flags = IPROC_CLK_AON,
+ .enable = ENABLE_VAL(0x4, 7, 1, 13),
+ .mdiv = REG_VAL(0x18, 10, 9),
+ },
+ [BCM_SR_GENPLL0_250M_CLK] = {
+ .channel = BCM_SR_GENPLL0_250M_CLK,
+ .flags = IPROC_CLK_AON,
+ .enable = ENABLE_VAL(0x4, 8, 2, 14),
+ .mdiv = REG_VAL(0x18, 20, 9),
+ },
+ [BCM_SR_GENPLL0_PCIE_AXI_CLK] = {
+ .channel = BCM_SR_GENPLL0_PCIE_AXI_CLK,
+ .flags = IPROC_CLK_AON,
+ .enable = ENABLE_VAL(0x4, 9, 3, 15),
+ .mdiv = REG_VAL(0x1c, 0, 9),
+ },
+ [BCM_SR_GENPLL0_PAXC_AXI_X2_CLK] = {
+ .channel = BCM_SR_GENPLL0_PAXC_AXI_X2_CLK,
+ .flags = IPROC_CLK_AON,
+ .enable = ENABLE_VAL(0x4, 10, 4, 16),
+ .mdiv = REG_VAL(0x1c, 10, 9),
+ },
+ [BCM_SR_GENPLL0_PAXC_AXI_CLK] = {
+ .channel = BCM_SR_GENPLL0_PAXC_AXI_CLK,
+ .flags = IPROC_CLK_AON,
+ .enable = ENABLE_VAL(0x4, 11, 5, 17),
+ .mdiv = REG_VAL(0x1c, 20, 9),
+ },
+};
+
+static int sr_genpll0_clk_init(struct platform_device *pdev)
+{
+ iproc_pll_clk_setup(pdev->dev.of_node,
+ &sr_genpll0, NULL, 0, sr_genpll0_clk,
+ ARRAY_SIZE(sr_genpll0_clk));
+ return 0;
+}
+
+static const struct iproc_pll_ctrl sr_genpll3 = {
+ .flags = IPROC_CLK_AON | IPROC_CLK_PLL_HAS_NDIV_FRAC |
+ IPROC_CLK_PLL_NEEDS_SW_CFG,
+ .aon = AON_VAL(0x0, 1, 19, 18),
+ .reset = RESET_VAL(0x0, 12, 11),
+ .dig_filter = DF_VAL(0x0, 4, 3, 0, 4, 7, 3),
+ .sw_ctrl = SW_CTRL_VAL(0x10, 31),
+ .ndiv_int = REG_VAL(0x10, 20, 10),
+ .ndiv_frac = REG_VAL(0x10, 0, 20),
+ .pdiv = REG_VAL(0x14, 0, 4),
+ .status = REG_VAL(0x30, 12, 1),
+};
+
+static const struct iproc_clk_ctrl sr_genpll3_clk[] = {
+ [BCM_SR_GENPLL3_HSLS_CLK] = {
+ .channel = BCM_SR_GENPLL3_HSLS_CLK,
+ .flags = IPROC_CLK_AON,
+ .enable = ENABLE_VAL(0x4, 6, 0, 12),
+ .mdiv = REG_VAL(0x18, 0, 9),
+ },
+ [BCM_SR_GENPLL3_SDIO_CLK] = {
+ .channel = BCM_SR_GENPLL3_SDIO_CLK,
+ .flags = IPROC_CLK_AON,
+ .enable = ENABLE_VAL(0x4, 7, 1, 13),
+ .mdiv = REG_VAL(0x18, 10, 9),
+ },
+};
+
+static void sr_genpll3_clk_init(struct device_node *node)
+{
+ iproc_pll_clk_setup(node, &sr_genpll3, NULL, 0, sr_genpll3_clk,
+ ARRAY_SIZE(sr_genpll3_clk));
+}
+CLK_OF_DECLARE(sr_genpll3_clk, "brcm,sr-genpll3", sr_genpll3_clk_init);
+
+static const struct iproc_pll_ctrl sr_genpll4 = {
+ .flags = IPROC_CLK_AON | IPROC_CLK_PLL_HAS_NDIV_FRAC |
+ IPROC_CLK_PLL_NEEDS_SW_CFG,
+ .aon = AON_VAL(0x0, 1, 25, 24),
+ .reset = RESET_VAL(0x0, 12, 11),
+ .dig_filter = DF_VAL(0x0, 4, 3, 0, 4, 7, 3),
+ .sw_ctrl = SW_CTRL_VAL(0x10, 31),
+ .ndiv_int = REG_VAL(0x10, 20, 10),
+ .ndiv_frac = REG_VAL(0x10, 0, 20),
+ .pdiv = REG_VAL(0x14, 0, 4),
+ .status = REG_VAL(0x30, 12, 1),
+};
+
+static const struct iproc_clk_ctrl sr_genpll4_clk[] = {
+ [BCM_SR_GENPLL4_CCN_CLK] = {
+ .channel = BCM_SR_GENPLL4_CCN_CLK,
+ .flags = IPROC_CLK_AON,
+ .enable = ENABLE_VAL(0x4, 6, 0, 12),
+ .mdiv = REG_VAL(0x18, 0, 9),
+ },
+};
+
+static int sr_genpll4_clk_init(struct platform_device *pdev)
+{
+ iproc_pll_clk_setup(pdev->dev.of_node,
+ &sr_genpll4, NULL, 0, sr_genpll4_clk,
+ ARRAY_SIZE(sr_genpll4_clk));
+ return 0;
+}
+
+static const struct iproc_pll_ctrl sr_genpll5 = {
+ .flags = IPROC_CLK_AON | IPROC_CLK_PLL_HAS_NDIV_FRAC |
+ IPROC_CLK_PLL_NEEDS_SW_CFG,
+ .aon = AON_VAL(0x0, 1, 1, 0),
+ .reset = RESET_VAL(0x0, 12, 11),
+ .dig_filter = DF_VAL(0x0, 4, 3, 0, 4, 7, 3),
+ .sw_ctrl = SW_CTRL_VAL(0x10, 31),
+ .ndiv_int = REG_VAL(0x10, 20, 10),
+ .ndiv_frac = REG_VAL(0x10, 0, 20),
+ .pdiv = REG_VAL(0x14, 0, 4),
+ .status = REG_VAL(0x30, 12, 1),
+};
+
+static const struct iproc_clk_ctrl sr_genpll5_clk[] = {
+ [BCM_SR_GENPLL5_FS_CLK] = {
+ .channel = BCM_SR_GENPLL5_FS_CLK,
+ .flags = IPROC_CLK_AON,
+ .enable = ENABLE_VAL(0x4, 6, 0, 12),
+ .mdiv = REG_VAL(0x18, 0, 9),
+ },
+ [BCM_SR_GENPLL5_SPU_CLK] = {
+ .channel = BCM_SR_GENPLL5_SPU_CLK,
+ .flags = IPROC_CLK_AON,
+ .enable = ENABLE_VAL(0x4, 6, 0, 12),
+ .mdiv = REG_VAL(0x18, 10, 9),
+ },
+};
+
+static int sr_genpll5_clk_init(struct platform_device *pdev)
+{
+ iproc_pll_clk_setup(pdev->dev.of_node,
+ &sr_genpll5, NULL, 0, sr_genpll5_clk,
+ ARRAY_SIZE(sr_genpll5_clk));
+ return 0;
+}
+
+static const struct iproc_pll_ctrl sr_lcpll0 = {
+ .flags = IPROC_CLK_AON | IPROC_CLK_PLL_NEEDS_SW_CFG,
+ .aon = AON_VAL(0x0, 2, 19, 18),
+ .reset = RESET_VAL(0x0, 31, 30),
+ .sw_ctrl = SW_CTRL_VAL(0x4, 31),
+ .ndiv_int = REG_VAL(0x4, 16, 10),
+ .pdiv = REG_VAL(0x4, 26, 4),
+ .status = REG_VAL(0x38, 12, 1),
+};
+
+static const struct iproc_clk_ctrl sr_lcpll0_clk[] = {
+ [BCM_SR_LCPLL0_SATA_REF_CLK] = {
+ .channel = BCM_SR_LCPLL0_SATA_REF_CLK,
+ .flags = IPROC_CLK_AON,
+ .enable = ENABLE_VAL(0x0, 7, 1, 13),
+ .mdiv = REG_VAL(0x14, 0, 9),
+ },
+ [BCM_SR_LCPLL0_USB_REF_CLK] = {
+ .channel = BCM_SR_LCPLL0_USB_REF_CLK,
+ .flags = IPROC_CLK_AON,
+ .enable = ENABLE_VAL(0x0, 8, 2, 14),
+ .mdiv = REG_VAL(0x14, 10, 9),
+ },
+ [BCM_SR_LCPLL0_SATA_REFPN_CLK] = {
+ .channel = BCM_SR_LCPLL0_SATA_REFPN_CLK,
+ .flags = IPROC_CLK_AON,
+ .enable = ENABLE_VAL(0x0, 9, 3, 15),
+ .mdiv = REG_VAL(0x14, 20, 9),
+ },
+};
+
+static int sr_lcpll0_clk_init(struct platform_device *pdev)
+{
+ iproc_pll_clk_setup(pdev->dev.of_node,
+ &sr_lcpll0, NULL, 0, sr_lcpll0_clk,
+ ARRAY_SIZE(sr_lcpll0_clk));
+ return 0;
+}
+
+static const struct iproc_pll_ctrl sr_lcpll1 = {
+ .flags = IPROC_CLK_AON | IPROC_CLK_PLL_NEEDS_SW_CFG,
+ .aon = AON_VAL(0x0, 2, 22, 21),
+ .reset = RESET_VAL(0x0, 31, 30),
+ .sw_ctrl = SW_CTRL_VAL(0x4, 31),
+ .ndiv_int = REG_VAL(0x4, 16, 10),
+ .pdiv = REG_VAL(0x4, 26, 4),
+ .status = REG_VAL(0x38, 12, 1),
+};
+
+static const struct iproc_clk_ctrl sr_lcpll1_clk[] = {
+ [BCM_SR_LCPLL1_WAN_CLK] = {
+ .channel = BCM_SR_LCPLL1_WAN_CLK,
+ .flags = IPROC_CLK_AON,
+ .enable = ENABLE_VAL(0x0, 7, 1, 13),
+ .mdiv = REG_VAL(0x14, 0, 9),
+ },
+};
+
+static int sr_lcpll1_clk_init(struct platform_device *pdev)
+{
+ iproc_pll_clk_setup(pdev->dev.of_node,
+ &sr_lcpll1, NULL, 0, sr_lcpll1_clk,
+ ARRAY_SIZE(sr_lcpll1_clk));
+ return 0;
+}
+
+static const struct iproc_pll_ctrl sr_lcpll_pcie = {
+ .flags = IPROC_CLK_AON | IPROC_CLK_PLL_NEEDS_SW_CFG,
+ .aon = AON_VAL(0x0, 2, 25, 24),
+ .reset = RESET_VAL(0x0, 31, 30),
+ .sw_ctrl = SW_CTRL_VAL(0x4, 31),
+ .ndiv_int = REG_VAL(0x4, 16, 10),
+ .pdiv = REG_VAL(0x4, 26, 4),
+ .status = REG_VAL(0x38, 12, 1),
+};
+
+static const struct iproc_clk_ctrl sr_lcpll_pcie_clk[] = {
+ [BCM_SR_LCPLL_PCIE_PHY_REF_CLK] = {
+ .channel = BCM_SR_LCPLL_PCIE_PHY_REF_CLK,
+ .flags = IPROC_CLK_AON,
+ .enable = ENABLE_VAL(0x0, 7, 1, 13),
+ .mdiv = REG_VAL(0x14, 0, 9),
+ },
+};
+
+static int sr_lcpll_pcie_clk_init(struct platform_device *pdev)
+{
+ iproc_pll_clk_setup(pdev->dev.of_node,
+ &sr_lcpll_pcie, NULL, 0, sr_lcpll_pcie_clk,
+ ARRAY_SIZE(sr_lcpll_pcie_clk));
+ return 0;
+}
+
+static const struct of_device_id sr_clk_dt_ids[] = {
+ { .compatible = "brcm,sr-genpll0", .data = sr_genpll0_clk_init },
+ { .compatible = "brcm,sr-genpll4", .data = sr_genpll4_clk_init },
+ { .compatible = "brcm,sr-genpll5", .data = sr_genpll5_clk_init },
+ { .compatible = "brcm,sr-lcpll0", .data = sr_lcpll0_clk_init },
+ { .compatible = "brcm,sr-lcpll1", .data = sr_lcpll1_clk_init },
+ { .compatible = "brcm,sr-lcpll-pcie", .data = sr_lcpll_pcie_clk_init },
+ { /* sentinel */ }
+};
+
+static int sr_clk_probe(struct platform_device *pdev)
+{
+ int (*probe_func)(struct platform_device *);
+
+ probe_func = of_device_get_match_data(&pdev->dev);
+ if (!probe_func)
+ return -ENODEV;
+
+ return probe_func(pdev);
+}
+
+static struct platform_driver sr_clk_driver = {
+ .driver = {
+ .name = "sr-clk",
+ .of_match_table = sr_clk_dt_ids,
+ },
+ .probe = sr_clk_probe,
+};
+builtin_platform_driver(sr_clk_driver);
--
2.7.4
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply related [flat|nested] 8+ messages in thread
* [PATCH v7 1/1] clk: bcm: Add clocks for Stingray SOC
@ 2017-06-06 4:23 ` Anup Patel
0 siblings, 0 replies; 8+ messages in thread
From: Anup Patel @ 2017-06-06 4:23 UTC (permalink / raw)
To: linux-arm-kernel
From: Sandeep Tripathy <sandeep.tripathy@broadcom.com>
This patch adds support for Stingray clocks in iproc
ccf. The Stingray SOC has various plls based on iproc
pll architecture.
Signed-off-by: Sandeep Tripathy <sandeep.tripathy@broadcom.com>
Signed-off-by: Anup Patel <anup.patel@broadcom.com>
Reviewed-by: Ray Jui <ray.jui@broadcom.com>
Reviewed-by: Scott Branden <scott.branden@broadcom.com>
---
drivers/clk/bcm/Kconfig | 8 ++
drivers/clk/bcm/Makefile | 1 +
drivers/clk/bcm/clk-sr.c | 327 +++++++++++++++++++++++++++++++++++++++++++++++
3 files changed, 336 insertions(+)
create mode 100644 drivers/clk/bcm/clk-sr.c
diff --git a/drivers/clk/bcm/Kconfig b/drivers/clk/bcm/Kconfig
index b5ae531..1d9187d 100644
--- a/drivers/clk/bcm/Kconfig
+++ b/drivers/clk/bcm/Kconfig
@@ -46,3 +46,11 @@ config CLK_BCM_NS2
default ARCH_BCM_IPROC
help
Enable common clock framework support for the Broadcom Northstar 2 SoC
+
+config CLK_BCM_SR
+ bool "Broadcom Stingray clock support"
+ depends on ARCH_BCM_IPROC || COMPILE_TEST
+ select COMMON_CLK_IPROC
+ default ARCH_BCM_IPROC
+ help
+ Enable common clock framework support for the Broadcom Stingray SoC
diff --git a/drivers/clk/bcm/Makefile b/drivers/clk/bcm/Makefile
index d9dc848..a0c14fa 100644
--- a/drivers/clk/bcm/Makefile
+++ b/drivers/clk/bcm/Makefile
@@ -10,3 +10,4 @@ obj-$(CONFIG_ARCH_BCM_53573) += clk-bcm53573-ilp.o
obj-$(CONFIG_CLK_BCM_CYGNUS) += clk-cygnus.o
obj-$(CONFIG_CLK_BCM_NSP) += clk-nsp.o
obj-$(CONFIG_CLK_BCM_NS2) += clk-ns2.o
+obj-$(CONFIG_CLK_BCM_SR) += clk-sr.o
diff --git a/drivers/clk/bcm/clk-sr.c b/drivers/clk/bcm/clk-sr.c
new file mode 100644
index 0000000..adc74f4
--- /dev/null
+++ b/drivers/clk/bcm/clk-sr.c
@@ -0,0 +1,327 @@
+/*
+ * Copyright 2017 Broadcom
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License, version 2, as
+ * published by the Free Software Foundation (the "GPL").
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License version 2 (GPLv2) for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * version 2 (GPLv2) along with this source code.
+ */
+
+#include <linux/err.h>
+#include <linux/clk-provider.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+
+#include <dt-bindings/clock/bcm-sr.h>
+#include "clk-iproc.h"
+
+#define REG_VAL(o, s, w) { .offset = o, .shift = s, .width = w, }
+
+#define AON_VAL(o, pw, ps, is) { .offset = o, .pwr_width = pw, \
+ .pwr_shift = ps, .iso_shift = is }
+
+#define SW_CTRL_VAL(o, s) { .offset = o, .shift = s, }
+
+#define RESET_VAL(o, rs, prs) { .offset = o, .reset_shift = rs, \
+ .p_reset_shift = prs }
+
+#define DF_VAL(o, kis, kiw, kps, kpw, kas, kaw) { .offset = o, \
+ .ki_shift = kis, .ki_width = kiw, .kp_shift = kps, .kp_width = kpw, \
+ .ka_shift = kas, .ka_width = kaw }
+
+#define VCO_CTRL_VAL(uo, lo) { .u_offset = uo, .l_offset = lo }
+
+#define ENABLE_VAL(o, es, hs, bs) { .offset = o, .enable_shift = es, \
+ .hold_shift = hs, .bypass_shift = bs }
+
+
+static const struct iproc_pll_ctrl sr_genpll0 = {
+ .flags = IPROC_CLK_AON | IPROC_CLK_PLL_HAS_NDIV_FRAC |
+ IPROC_CLK_PLL_NEEDS_SW_CFG,
+ .aon = AON_VAL(0x0, 5, 1, 0),
+ .reset = RESET_VAL(0x0, 12, 11),
+ .dig_filter = DF_VAL(0x0, 4, 3, 0, 4, 7, 3),
+ .sw_ctrl = SW_CTRL_VAL(0x10, 31),
+ .ndiv_int = REG_VAL(0x10, 20, 10),
+ .ndiv_frac = REG_VAL(0x10, 0, 20),
+ .pdiv = REG_VAL(0x14, 0, 4),
+ .status = REG_VAL(0x30, 12, 1),
+};
+
+static const struct iproc_clk_ctrl sr_genpll0_clk[] = {
+ [BCM_SR_GENPLL0_SATA_CLK] = {
+ .channel = BCM_SR_GENPLL0_SATA_CLK,
+ .flags = IPROC_CLK_AON,
+ .enable = ENABLE_VAL(0x4, 6, 0, 12),
+ .mdiv = REG_VAL(0x18, 0, 9),
+ },
+ [BCM_SR_GENPLL0_SCR_CLK] = {
+ .channel = BCM_SR_GENPLL0_SCR_CLK,
+ .flags = IPROC_CLK_AON,
+ .enable = ENABLE_VAL(0x4, 7, 1, 13),
+ .mdiv = REG_VAL(0x18, 10, 9),
+ },
+ [BCM_SR_GENPLL0_250M_CLK] = {
+ .channel = BCM_SR_GENPLL0_250M_CLK,
+ .flags = IPROC_CLK_AON,
+ .enable = ENABLE_VAL(0x4, 8, 2, 14),
+ .mdiv = REG_VAL(0x18, 20, 9),
+ },
+ [BCM_SR_GENPLL0_PCIE_AXI_CLK] = {
+ .channel = BCM_SR_GENPLL0_PCIE_AXI_CLK,
+ .flags = IPROC_CLK_AON,
+ .enable = ENABLE_VAL(0x4, 9, 3, 15),
+ .mdiv = REG_VAL(0x1c, 0, 9),
+ },
+ [BCM_SR_GENPLL0_PAXC_AXI_X2_CLK] = {
+ .channel = BCM_SR_GENPLL0_PAXC_AXI_X2_CLK,
+ .flags = IPROC_CLK_AON,
+ .enable = ENABLE_VAL(0x4, 10, 4, 16),
+ .mdiv = REG_VAL(0x1c, 10, 9),
+ },
+ [BCM_SR_GENPLL0_PAXC_AXI_CLK] = {
+ .channel = BCM_SR_GENPLL0_PAXC_AXI_CLK,
+ .flags = IPROC_CLK_AON,
+ .enable = ENABLE_VAL(0x4, 11, 5, 17),
+ .mdiv = REG_VAL(0x1c, 20, 9),
+ },
+};
+
+static int sr_genpll0_clk_init(struct platform_device *pdev)
+{
+ iproc_pll_clk_setup(pdev->dev.of_node,
+ &sr_genpll0, NULL, 0, sr_genpll0_clk,
+ ARRAY_SIZE(sr_genpll0_clk));
+ return 0;
+}
+
+static const struct iproc_pll_ctrl sr_genpll3 = {
+ .flags = IPROC_CLK_AON | IPROC_CLK_PLL_HAS_NDIV_FRAC |
+ IPROC_CLK_PLL_NEEDS_SW_CFG,
+ .aon = AON_VAL(0x0, 1, 19, 18),
+ .reset = RESET_VAL(0x0, 12, 11),
+ .dig_filter = DF_VAL(0x0, 4, 3, 0, 4, 7, 3),
+ .sw_ctrl = SW_CTRL_VAL(0x10, 31),
+ .ndiv_int = REG_VAL(0x10, 20, 10),
+ .ndiv_frac = REG_VAL(0x10, 0, 20),
+ .pdiv = REG_VAL(0x14, 0, 4),
+ .status = REG_VAL(0x30, 12, 1),
+};
+
+static const struct iproc_clk_ctrl sr_genpll3_clk[] = {
+ [BCM_SR_GENPLL3_HSLS_CLK] = {
+ .channel = BCM_SR_GENPLL3_HSLS_CLK,
+ .flags = IPROC_CLK_AON,
+ .enable = ENABLE_VAL(0x4, 6, 0, 12),
+ .mdiv = REG_VAL(0x18, 0, 9),
+ },
+ [BCM_SR_GENPLL3_SDIO_CLK] = {
+ .channel = BCM_SR_GENPLL3_SDIO_CLK,
+ .flags = IPROC_CLK_AON,
+ .enable = ENABLE_VAL(0x4, 7, 1, 13),
+ .mdiv = REG_VAL(0x18, 10, 9),
+ },
+};
+
+static void sr_genpll3_clk_init(struct device_node *node)
+{
+ iproc_pll_clk_setup(node, &sr_genpll3, NULL, 0, sr_genpll3_clk,
+ ARRAY_SIZE(sr_genpll3_clk));
+}
+CLK_OF_DECLARE(sr_genpll3_clk, "brcm,sr-genpll3", sr_genpll3_clk_init);
+
+static const struct iproc_pll_ctrl sr_genpll4 = {
+ .flags = IPROC_CLK_AON | IPROC_CLK_PLL_HAS_NDIV_FRAC |
+ IPROC_CLK_PLL_NEEDS_SW_CFG,
+ .aon = AON_VAL(0x0, 1, 25, 24),
+ .reset = RESET_VAL(0x0, 12, 11),
+ .dig_filter = DF_VAL(0x0, 4, 3, 0, 4, 7, 3),
+ .sw_ctrl = SW_CTRL_VAL(0x10, 31),
+ .ndiv_int = REG_VAL(0x10, 20, 10),
+ .ndiv_frac = REG_VAL(0x10, 0, 20),
+ .pdiv = REG_VAL(0x14, 0, 4),
+ .status = REG_VAL(0x30, 12, 1),
+};
+
+static const struct iproc_clk_ctrl sr_genpll4_clk[] = {
+ [BCM_SR_GENPLL4_CCN_CLK] = {
+ .channel = BCM_SR_GENPLL4_CCN_CLK,
+ .flags = IPROC_CLK_AON,
+ .enable = ENABLE_VAL(0x4, 6, 0, 12),
+ .mdiv = REG_VAL(0x18, 0, 9),
+ },
+};
+
+static int sr_genpll4_clk_init(struct platform_device *pdev)
+{
+ iproc_pll_clk_setup(pdev->dev.of_node,
+ &sr_genpll4, NULL, 0, sr_genpll4_clk,
+ ARRAY_SIZE(sr_genpll4_clk));
+ return 0;
+}
+
+static const struct iproc_pll_ctrl sr_genpll5 = {
+ .flags = IPROC_CLK_AON | IPROC_CLK_PLL_HAS_NDIV_FRAC |
+ IPROC_CLK_PLL_NEEDS_SW_CFG,
+ .aon = AON_VAL(0x0, 1, 1, 0),
+ .reset = RESET_VAL(0x0, 12, 11),
+ .dig_filter = DF_VAL(0x0, 4, 3, 0, 4, 7, 3),
+ .sw_ctrl = SW_CTRL_VAL(0x10, 31),
+ .ndiv_int = REG_VAL(0x10, 20, 10),
+ .ndiv_frac = REG_VAL(0x10, 0, 20),
+ .pdiv = REG_VAL(0x14, 0, 4),
+ .status = REG_VAL(0x30, 12, 1),
+};
+
+static const struct iproc_clk_ctrl sr_genpll5_clk[] = {
+ [BCM_SR_GENPLL5_FS_CLK] = {
+ .channel = BCM_SR_GENPLL5_FS_CLK,
+ .flags = IPROC_CLK_AON,
+ .enable = ENABLE_VAL(0x4, 6, 0, 12),
+ .mdiv = REG_VAL(0x18, 0, 9),
+ },
+ [BCM_SR_GENPLL5_SPU_CLK] = {
+ .channel = BCM_SR_GENPLL5_SPU_CLK,
+ .flags = IPROC_CLK_AON,
+ .enable = ENABLE_VAL(0x4, 6, 0, 12),
+ .mdiv = REG_VAL(0x18, 10, 9),
+ },
+};
+
+static int sr_genpll5_clk_init(struct platform_device *pdev)
+{
+ iproc_pll_clk_setup(pdev->dev.of_node,
+ &sr_genpll5, NULL, 0, sr_genpll5_clk,
+ ARRAY_SIZE(sr_genpll5_clk));
+ return 0;
+}
+
+static const struct iproc_pll_ctrl sr_lcpll0 = {
+ .flags = IPROC_CLK_AON | IPROC_CLK_PLL_NEEDS_SW_CFG,
+ .aon = AON_VAL(0x0, 2, 19, 18),
+ .reset = RESET_VAL(0x0, 31, 30),
+ .sw_ctrl = SW_CTRL_VAL(0x4, 31),
+ .ndiv_int = REG_VAL(0x4, 16, 10),
+ .pdiv = REG_VAL(0x4, 26, 4),
+ .status = REG_VAL(0x38, 12, 1),
+};
+
+static const struct iproc_clk_ctrl sr_lcpll0_clk[] = {
+ [BCM_SR_LCPLL0_SATA_REF_CLK] = {
+ .channel = BCM_SR_LCPLL0_SATA_REF_CLK,
+ .flags = IPROC_CLK_AON,
+ .enable = ENABLE_VAL(0x0, 7, 1, 13),
+ .mdiv = REG_VAL(0x14, 0, 9),
+ },
+ [BCM_SR_LCPLL0_USB_REF_CLK] = {
+ .channel = BCM_SR_LCPLL0_USB_REF_CLK,
+ .flags = IPROC_CLK_AON,
+ .enable = ENABLE_VAL(0x0, 8, 2, 14),
+ .mdiv = REG_VAL(0x14, 10, 9),
+ },
+ [BCM_SR_LCPLL0_SATA_REFPN_CLK] = {
+ .channel = BCM_SR_LCPLL0_SATA_REFPN_CLK,
+ .flags = IPROC_CLK_AON,
+ .enable = ENABLE_VAL(0x0, 9, 3, 15),
+ .mdiv = REG_VAL(0x14, 20, 9),
+ },
+};
+
+static int sr_lcpll0_clk_init(struct platform_device *pdev)
+{
+ iproc_pll_clk_setup(pdev->dev.of_node,
+ &sr_lcpll0, NULL, 0, sr_lcpll0_clk,
+ ARRAY_SIZE(sr_lcpll0_clk));
+ return 0;
+}
+
+static const struct iproc_pll_ctrl sr_lcpll1 = {
+ .flags = IPROC_CLK_AON | IPROC_CLK_PLL_NEEDS_SW_CFG,
+ .aon = AON_VAL(0x0, 2, 22, 21),
+ .reset = RESET_VAL(0x0, 31, 30),
+ .sw_ctrl = SW_CTRL_VAL(0x4, 31),
+ .ndiv_int = REG_VAL(0x4, 16, 10),
+ .pdiv = REG_VAL(0x4, 26, 4),
+ .status = REG_VAL(0x38, 12, 1),
+};
+
+static const struct iproc_clk_ctrl sr_lcpll1_clk[] = {
+ [BCM_SR_LCPLL1_WAN_CLK] = {
+ .channel = BCM_SR_LCPLL1_WAN_CLK,
+ .flags = IPROC_CLK_AON,
+ .enable = ENABLE_VAL(0x0, 7, 1, 13),
+ .mdiv = REG_VAL(0x14, 0, 9),
+ },
+};
+
+static int sr_lcpll1_clk_init(struct platform_device *pdev)
+{
+ iproc_pll_clk_setup(pdev->dev.of_node,
+ &sr_lcpll1, NULL, 0, sr_lcpll1_clk,
+ ARRAY_SIZE(sr_lcpll1_clk));
+ return 0;
+}
+
+static const struct iproc_pll_ctrl sr_lcpll_pcie = {
+ .flags = IPROC_CLK_AON | IPROC_CLK_PLL_NEEDS_SW_CFG,
+ .aon = AON_VAL(0x0, 2, 25, 24),
+ .reset = RESET_VAL(0x0, 31, 30),
+ .sw_ctrl = SW_CTRL_VAL(0x4, 31),
+ .ndiv_int = REG_VAL(0x4, 16, 10),
+ .pdiv = REG_VAL(0x4, 26, 4),
+ .status = REG_VAL(0x38, 12, 1),
+};
+
+static const struct iproc_clk_ctrl sr_lcpll_pcie_clk[] = {
+ [BCM_SR_LCPLL_PCIE_PHY_REF_CLK] = {
+ .channel = BCM_SR_LCPLL_PCIE_PHY_REF_CLK,
+ .flags = IPROC_CLK_AON,
+ .enable = ENABLE_VAL(0x0, 7, 1, 13),
+ .mdiv = REG_VAL(0x14, 0, 9),
+ },
+};
+
+static int sr_lcpll_pcie_clk_init(struct platform_device *pdev)
+{
+ iproc_pll_clk_setup(pdev->dev.of_node,
+ &sr_lcpll_pcie, NULL, 0, sr_lcpll_pcie_clk,
+ ARRAY_SIZE(sr_lcpll_pcie_clk));
+ return 0;
+}
+
+static const struct of_device_id sr_clk_dt_ids[] = {
+ { .compatible = "brcm,sr-genpll0", .data = sr_genpll0_clk_init },
+ { .compatible = "brcm,sr-genpll4", .data = sr_genpll4_clk_init },
+ { .compatible = "brcm,sr-genpll5", .data = sr_genpll5_clk_init },
+ { .compatible = "brcm,sr-lcpll0", .data = sr_lcpll0_clk_init },
+ { .compatible = "brcm,sr-lcpll1", .data = sr_lcpll1_clk_init },
+ { .compatible = "brcm,sr-lcpll-pcie", .data = sr_lcpll_pcie_clk_init },
+ { /* sentinel */ }
+};
+
+static int sr_clk_probe(struct platform_device *pdev)
+{
+ int (*probe_func)(struct platform_device *);
+
+ probe_func = of_device_get_match_data(&pdev->dev);
+ if (!probe_func)
+ return -ENODEV;
+
+ return probe_func(pdev);
+}
+
+static struct platform_driver sr_clk_driver = {
+ .driver = {
+ .name = "sr-clk",
+ .of_match_table = sr_clk_dt_ids,
+ },
+ .probe = sr_clk_probe,
+};
+builtin_platform_driver(sr_clk_driver);
--
2.7.4
^ permalink raw reply related [flat|nested] 8+ messages in thread
* Re: [PATCH v7 1/1] clk: bcm: Add clocks for Stingray SOC
@ 2017-06-20 1:20 ` Stephen Boyd
0 siblings, 0 replies; 8+ messages in thread
From: Stephen Boyd @ 2017-06-20 1:20 UTC (permalink / raw)
To: Anup Patel
Cc: Rob Herring, Mark Rutland, Michael Turquette, Catalin Marinas,
Will Deacon, Ray Jui, Scott Branden, Jon Mason, Florian Fainelli,
Oza Pawandeep, Srinath Mannam, Pramod Kumar, Sandeep Tripathy,
devicetree, linux-kernel, linux-clk, linux-arm-kernel,
bcm-kernel-feedback-list
On 06/06, Anup Patel wrote:
> From: Sandeep Tripathy <sandeep.tripathy@broadcom.com>
>
> This patch adds support for Stingray clocks in iproc
> ccf. The Stingray SOC has various plls based on iproc
> pll architecture.
>
> Signed-off-by: Sandeep Tripathy <sandeep.tripathy@broadcom.com>
> Signed-off-by: Anup Patel <anup.patel@broadcom.com>
> Reviewed-by: Ray Jui <ray.jui@broadcom.com>
> Reviewed-by: Scott Branden <scott.branden@broadcom.com>
> ---
Applied to clk-next
--
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
a Linux Foundation Collaborative Project
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [PATCH v7 1/1] clk: bcm: Add clocks for Stingray SOC
@ 2017-06-20 1:20 ` Stephen Boyd
0 siblings, 0 replies; 8+ messages in thread
From: Stephen Boyd @ 2017-06-20 1:20 UTC (permalink / raw)
To: Anup Patel
Cc: Rob Herring, Mark Rutland, Michael Turquette, Catalin Marinas,
Will Deacon, Ray Jui, Scott Branden, Jon Mason, Florian Fainelli,
Oza Pawandeep, Srinath Mannam, Pramod Kumar, Sandeep Tripathy,
devicetree-u79uwXL29TY76Z2rM5mHXA,
linux-kernel-u79uwXL29TY76Z2rM5mHXA,
linux-clk-u79uwXL29TY76Z2rM5mHXA,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
bcm-kernel-feedback-list-dY08KVG/lbpWk0Htik3J/w
On 06/06, Anup Patel wrote:
> From: Sandeep Tripathy <sandeep.tripathy-dY08KVG/lbpWk0Htik3J/w@public.gmane.org>
>
> This patch adds support for Stingray clocks in iproc
> ccf. The Stingray SOC has various plls based on iproc
> pll architecture.
>
> Signed-off-by: Sandeep Tripathy <sandeep.tripathy-dY08KVG/lbpWk0Htik3J/w@public.gmane.org>
> Signed-off-by: Anup Patel <anup.patel-dY08KVG/lbpWk0Htik3J/w@public.gmane.org>
> Reviewed-by: Ray Jui <ray.jui-dY08KVG/lbpWk0Htik3J/w@public.gmane.org>
> Reviewed-by: Scott Branden <scott.branden-dY08KVG/lbpWk0Htik3J/w@public.gmane.org>
> ---
Applied to clk-next
--
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
a Linux Foundation Collaborative Project
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply [flat|nested] 8+ messages in thread
* [PATCH v7 1/1] clk: bcm: Add clocks for Stingray SOC
@ 2017-06-20 1:20 ` Stephen Boyd
0 siblings, 0 replies; 8+ messages in thread
From: Stephen Boyd @ 2017-06-20 1:20 UTC (permalink / raw)
To: linux-arm-kernel
On 06/06, Anup Patel wrote:
> From: Sandeep Tripathy <sandeep.tripathy@broadcom.com>
>
> This patch adds support for Stingray clocks in iproc
> ccf. The Stingray SOC has various plls based on iproc
> pll architecture.
>
> Signed-off-by: Sandeep Tripathy <sandeep.tripathy@broadcom.com>
> Signed-off-by: Anup Patel <anup.patel@broadcom.com>
> Reviewed-by: Ray Jui <ray.jui@broadcom.com>
> Reviewed-by: Scott Branden <scott.branden@broadcom.com>
> ---
Applied to clk-next
--
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
a Linux Foundation Collaborative Project
^ permalink raw reply [flat|nested] 8+ messages in thread
end of thread, other threads:[~2017-06-20 1:20 UTC | newest]
Thread overview: 8+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2017-06-06 4:23 [PATCH v7 0/1] Broadcom Stingray SOC Initial Support Anup Patel
2017-06-06 4:23 ` Anup Patel
2017-06-06 4:23 ` [PATCH v7 1/1] clk: bcm: Add clocks for Stingray SOC Anup Patel
2017-06-06 4:23 ` Anup Patel
2017-06-06 4:23 ` Anup Patel
2017-06-20 1:20 ` Stephen Boyd
2017-06-20 1:20 ` Stephen Boyd
2017-06-20 1:20 ` Stephen Boyd
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.