All of lore.kernel.org
 help / color / mirror / Atom feed
From: Varadarajan Narayanan <varada-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>
To: bjorn.andersson-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org,
	robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org,
	mark.rutland-5wv7dgnIgG8@public.gmane.org,
	mturquette-rdvid1DuHRBWk0Htik3J/w@public.gmane.org,
	sboyd-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org,
	linus.walleij-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org,
	andy.gross-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org,
	david.brown-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org,
	catalin.marinas-5wv7dgnIgG8@public.gmane.org,
	will.deacon-5wv7dgnIgG8@public.gmane.org,
	devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	linux-clk-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	linux-gpio-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	linux-arm-msm-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	linux-soc-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org
Cc: absahu-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org,
	sjaganat-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org,
	sricharan-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org,
	Varadarajan Narayanan
	<varada-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>,
	Manoharan Vijaya Raghavan
	<mraghava-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>
Subject: [PATCH v5 5/6] arm64: dts: Add ipq8074 SoC and HK01 board support
Date: Fri,  9 Jun 2017 15:03:02 +0530	[thread overview]
Message-ID: <1497000783-27916-6-git-send-email-varada@codeaurora.org> (raw)
In-Reply-To: <1497000783-27916-1-git-send-email-varada-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>

Add initial device tree support for the Qualcomm IPQ8074 SoC and
HK01 evaluation board.

Signed-off-by: Manoharan Vijaya Raghavan <mraghava-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>
Signed-off-by: Abhishek Sahu <absahu-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>
Signed-off-by: Varadarajan Narayanan <varada-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>
---
 arch/arm64/boot/dts/qcom/Makefile         |   1 +
 arch/arm64/boot/dts/qcom/ipq8074-hk01.dts |  53 ++++++++
 arch/arm64/boot/dts/qcom/ipq8074.dtsi     | 194 ++++++++++++++++++++++++++++++
 3 files changed, 248 insertions(+)
 create mode 100644 arch/arm64/boot/dts/qcom/ipq8074-hk01.dts
 create mode 100644 arch/arm64/boot/dts/qcom/ipq8074.dtsi

diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
index cc0f02d..ff81d7e 100644
--- a/arch/arm64/boot/dts/qcom/Makefile
+++ b/arch/arm64/boot/dts/qcom/Makefile
@@ -1,5 +1,6 @@
 dtb-$(CONFIG_ARCH_QCOM)	+= apq8016-sbc.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= apq8096-db820c.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= ipq8074-hk01.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= msm8916-mtp.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= msm8992-bullhead-rev-101.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= msm8994-angler-rev-101.dtb
diff --git a/arch/arm64/boot/dts/qcom/ipq8074-hk01.dts b/arch/arm64/boot/dts/qcom/ipq8074-hk01.dts
new file mode 100644
index 0000000..7d44be9
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/ipq8074-hk01.dts
@@ -0,0 +1,53 @@
+/dts-v1/;
+/* Copyright (c) 2017, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+#include "ipq8074.dtsi"
+
+/ {
+	#address-cells = <0x2>;
+	#size-cells = <0x2>;
+	model = "Qualcomm Technologies, Inc. IPQ8074-HK01";
+	compatible = "qcom,ipq8074-hk01", "qcom,ipq8074";
+	interrupt-parent = <&intc>;
+
+	aliases {
+		serial0 = &blsp1_uart5;
+	};
+
+	chosen {
+		bootargs = "root=/dev/ram0 rw init=/init";
+		stdout-path = "serial0";
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x0 0x40000000 0x0 0x20000000>;
+	};
+
+	soc {
+		pinctrl@1000000 {
+			serial_4_pins: serial4_pinmux {
+				mux {
+					pins = "gpio23", "gpio24";
+					function = "blsp4_uart1";
+					bias-disable;
+				};
+			};
+		};
+
+		serial@78b3000 {
+			pinctrl-0 = <&serial_4_pins>;
+			pinctrl-names = "default";
+			status = "ok";
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/ipq8074.dtsi b/arch/arm64/boot/dts/qcom/ipq8074.dtsi
new file mode 100644
index 0000000..2bc5dec
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi
@@ -0,0 +1,194 @@
+/*
+ * Copyright (c) 2017, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/qcom,gcc-ipq8074.h>
+
+/ {
+	model = "Qualcomm Technologies, Inc. IPQ8074";
+	compatible = "qcom,ipq8074";
+
+	soc: soc {
+		#address-cells = <0x1>;
+		#size-cells = <0x1>;
+		ranges = <0 0 0 0xffffffff>;
+		compatible = "simple-bus";
+
+		pinctrl@1000000 {
+			compatible = "qcom,ipq8074-pinctrl";
+			reg = <0x1000000 0x300000>;
+			interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <0x2>;
+			interrupt-controller;
+			#interrupt-cells = <0x2>;
+		};
+
+		intc: interrupt-controller@b000000 {
+			compatible = "qcom,msm-qgic2";
+			interrupt-controller;
+			#interrupt-cells = <0x3>;
+			reg = <0xb000000 0x1000>, <0xb002000 0x1000>;
+		};
+
+		timer {
+			compatible = "arm,armv8-timer";
+			interrupts = <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+				     <GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+				     <GIC_PPI 4 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+				     <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+		};
+
+		timer@b120000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			compatible = "arm,armv7-timer-mem";
+			reg = <0xb120000 0x1000>;
+			clock-frequency = <19200000>;
+
+			frame@b120000 {
+				frame-number = <0>;
+				interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0xb121000 0x1000>,
+				      <0xb122000 0x1000>;
+			};
+
+			frame@b123000 {
+				frame-number = <1>;
+				interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0xb123000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@b124000 {
+				frame-number = <2>;
+				interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0xb124000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@b125000 {
+				frame-number = <3>;
+				interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0xb125000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@b126000 {
+				frame-number = <4>;
+				interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0xb126000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@b127000 {
+				frame-number = <5>;
+				interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0xb127000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@b128000 {
+				frame-number = <6>;
+				interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0xb128000 0x1000>;
+				status = "disabled";
+			};
+		};
+
+		gcc: gcc@1800000 {
+			compatible = "qcom,gcc-ipq8074";
+			reg = <0x1800000 0x80000>;
+			#clock-cells = <0x1>;
+			#reset-cells = <0x1>;
+		};
+
+		blsp1_uart5: serial@78b3000 {
+			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
+			reg = <0x78b3000 0x200>;
+			interrupts = <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_UART5_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			status = "disabled";
+		};
+	};
+
+	cpus {
+		#address-cells = <0x1>;
+		#size-cells = <0x0>;
+
+		CPU0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53", "arm,armv8";
+			reg = <0x0>;
+			next-level-cache = <&L2_0>;
+			enable-method = "psci";
+		};
+
+		CPU1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53", "arm,armv8";
+			enable-method = "psci";
+			reg = <0x1>;
+			next-level-cache = <&L2_0>;
+		};
+
+		CPU2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53", "arm,armv8";
+			enable-method = "psci";
+			reg = <0x2>;
+			next-level-cache = <&L2_0>;
+		};
+
+		CPU3: cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53", "arm,armv8";
+			enable-method = "psci";
+			reg = <0x3>;
+			next-level-cache = <&L2_0>;
+		};
+
+		L2_0: l2-cache {
+			compatible = "cache";
+			cache-level = <0x2>;
+		};
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+	};
+
+	pmu {
+		compatible = "arm,armv8-pmuv3";
+		interrupts = <GIC_PPI 7 GIC_CPU_MASK_SIMPLE(4)>;
+	};
+
+	clocks {
+		sleep_clk: sleep_clk {
+			compatible = "fixed-clock";
+			clock-frequency = <32000>;
+			#clock-cells = <0>;
+		};
+
+		xo: xo {
+			compatible = "fixed-clock";
+			clock-frequency = <19200000>;
+			#clock-cells = <0>;
+		};
+	};
+};
-- 
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux Foundation

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

WARNING: multiple messages have this Message-ID (diff)
From: Varadarajan Narayanan <varada@codeaurora.org>
To: bjorn.andersson@linaro.org, robh+dt@kernel.org,
	mark.rutland@arm.com, mturquette@baylibre.com,
	sboyd@codeaurora.org, linus.walleij@linaro.org,
	andy.gross@linaro.org, david.brown@linaro.org,
	catalin.marinas@arm.com, will.deacon@arm.com,
	devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
	linux-clk@vger.kernel.org, linux-gpio@vger.kernel.org,
	linux-arm-msm@vger.kernel.org, linux-soc@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org
Cc: absahu@codeaurora.org, sjaganat@codeaurora.org,
	sricharan@codeaurora.org,
	Varadarajan Narayanan <varada@codeaurora.org>,
	Manoharan Vijaya Raghavan <mraghava@codeaurora.org>
Subject: [PATCH v5 5/6] arm64: dts: Add ipq8074 SoC and HK01 board support
Date: Fri,  9 Jun 2017 15:03:02 +0530	[thread overview]
Message-ID: <1497000783-27916-6-git-send-email-varada@codeaurora.org> (raw)
In-Reply-To: <1497000783-27916-1-git-send-email-varada@codeaurora.org>

Add initial device tree support for the Qualcomm IPQ8074 SoC and
HK01 evaluation board.

Signed-off-by: Manoharan Vijaya Raghavan <mraghava@codeaurora.org>
Signed-off-by: Abhishek Sahu <absahu@codeaurora.org>
Signed-off-by: Varadarajan Narayanan <varada@codeaurora.org>
---
 arch/arm64/boot/dts/qcom/Makefile         |   1 +
 arch/arm64/boot/dts/qcom/ipq8074-hk01.dts |  53 ++++++++
 arch/arm64/boot/dts/qcom/ipq8074.dtsi     | 194 ++++++++++++++++++++++++++++++
 3 files changed, 248 insertions(+)
 create mode 100644 arch/arm64/boot/dts/qcom/ipq8074-hk01.dts
 create mode 100644 arch/arm64/boot/dts/qcom/ipq8074.dtsi

diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
index cc0f02d..ff81d7e 100644
--- a/arch/arm64/boot/dts/qcom/Makefile
+++ b/arch/arm64/boot/dts/qcom/Makefile
@@ -1,5 +1,6 @@
 dtb-$(CONFIG_ARCH_QCOM)	+= apq8016-sbc.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= apq8096-db820c.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= ipq8074-hk01.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= msm8916-mtp.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= msm8992-bullhead-rev-101.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= msm8994-angler-rev-101.dtb
diff --git a/arch/arm64/boot/dts/qcom/ipq8074-hk01.dts b/arch/arm64/boot/dts/qcom/ipq8074-hk01.dts
new file mode 100644
index 0000000..7d44be9
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/ipq8074-hk01.dts
@@ -0,0 +1,53 @@
+/dts-v1/;
+/* Copyright (c) 2017, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+#include "ipq8074.dtsi"
+
+/ {
+	#address-cells = <0x2>;
+	#size-cells = <0x2>;
+	model = "Qualcomm Technologies, Inc. IPQ8074-HK01";
+	compatible = "qcom,ipq8074-hk01", "qcom,ipq8074";
+	interrupt-parent = <&intc>;
+
+	aliases {
+		serial0 = &blsp1_uart5;
+	};
+
+	chosen {
+		bootargs = "root=/dev/ram0 rw init=/init";
+		stdout-path = "serial0";
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x0 0x40000000 0x0 0x20000000>;
+	};
+
+	soc {
+		pinctrl@1000000 {
+			serial_4_pins: serial4_pinmux {
+				mux {
+					pins = "gpio23", "gpio24";
+					function = "blsp4_uart1";
+					bias-disable;
+				};
+			};
+		};
+
+		serial@78b3000 {
+			pinctrl-0 = <&serial_4_pins>;
+			pinctrl-names = "default";
+			status = "ok";
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/ipq8074.dtsi b/arch/arm64/boot/dts/qcom/ipq8074.dtsi
new file mode 100644
index 0000000..2bc5dec
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi
@@ -0,0 +1,194 @@
+/*
+ * Copyright (c) 2017, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/qcom,gcc-ipq8074.h>
+
+/ {
+	model = "Qualcomm Technologies, Inc. IPQ8074";
+	compatible = "qcom,ipq8074";
+
+	soc: soc {
+		#address-cells = <0x1>;
+		#size-cells = <0x1>;
+		ranges = <0 0 0 0xffffffff>;
+		compatible = "simple-bus";
+
+		pinctrl@1000000 {
+			compatible = "qcom,ipq8074-pinctrl";
+			reg = <0x1000000 0x300000>;
+			interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <0x2>;
+			interrupt-controller;
+			#interrupt-cells = <0x2>;
+		};
+
+		intc: interrupt-controller@b000000 {
+			compatible = "qcom,msm-qgic2";
+			interrupt-controller;
+			#interrupt-cells = <0x3>;
+			reg = <0xb000000 0x1000>, <0xb002000 0x1000>;
+		};
+
+		timer {
+			compatible = "arm,armv8-timer";
+			interrupts = <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+				     <GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+				     <GIC_PPI 4 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+				     <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+		};
+
+		timer@b120000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			compatible = "arm,armv7-timer-mem";
+			reg = <0xb120000 0x1000>;
+			clock-frequency = <19200000>;
+
+			frame@b120000 {
+				frame-number = <0>;
+				interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0xb121000 0x1000>,
+				      <0xb122000 0x1000>;
+			};
+
+			frame@b123000 {
+				frame-number = <1>;
+				interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0xb123000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@b124000 {
+				frame-number = <2>;
+				interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0xb124000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@b125000 {
+				frame-number = <3>;
+				interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0xb125000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@b126000 {
+				frame-number = <4>;
+				interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0xb126000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@b127000 {
+				frame-number = <5>;
+				interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0xb127000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@b128000 {
+				frame-number = <6>;
+				interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0xb128000 0x1000>;
+				status = "disabled";
+			};
+		};
+
+		gcc: gcc@1800000 {
+			compatible = "qcom,gcc-ipq8074";
+			reg = <0x1800000 0x80000>;
+			#clock-cells = <0x1>;
+			#reset-cells = <0x1>;
+		};
+
+		blsp1_uart5: serial@78b3000 {
+			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
+			reg = <0x78b3000 0x200>;
+			interrupts = <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_UART5_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			status = "disabled";
+		};
+	};
+
+	cpus {
+		#address-cells = <0x1>;
+		#size-cells = <0x0>;
+
+		CPU0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53", "arm,armv8";
+			reg = <0x0>;
+			next-level-cache = <&L2_0>;
+			enable-method = "psci";
+		};
+
+		CPU1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53", "arm,armv8";
+			enable-method = "psci";
+			reg = <0x1>;
+			next-level-cache = <&L2_0>;
+		};
+
+		CPU2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53", "arm,armv8";
+			enable-method = "psci";
+			reg = <0x2>;
+			next-level-cache = <&L2_0>;
+		};
+
+		CPU3: cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53", "arm,armv8";
+			enable-method = "psci";
+			reg = <0x3>;
+			next-level-cache = <&L2_0>;
+		};
+
+		L2_0: l2-cache {
+			compatible = "cache";
+			cache-level = <0x2>;
+		};
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+	};
+
+	pmu {
+		compatible = "arm,armv8-pmuv3";
+		interrupts = <GIC_PPI 7 GIC_CPU_MASK_SIMPLE(4)>;
+	};
+
+	clocks {
+		sleep_clk: sleep_clk {
+			compatible = "fixed-clock";
+			clock-frequency = <32000>;
+			#clock-cells = <0>;
+		};
+
+		xo: xo {
+			compatible = "fixed-clock";
+			clock-frequency = <19200000>;
+			#clock-cells = <0>;
+		};
+	};
+};
-- 
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux Foundation

WARNING: multiple messages have this Message-ID (diff)
From: varada@codeaurora.org (Varadarajan Narayanan)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v5 5/6] arm64: dts: Add ipq8074 SoC and HK01 board support
Date: Fri,  9 Jun 2017 15:03:02 +0530	[thread overview]
Message-ID: <1497000783-27916-6-git-send-email-varada@codeaurora.org> (raw)
In-Reply-To: <1497000783-27916-1-git-send-email-varada@codeaurora.org>

Add initial device tree support for the Qualcomm IPQ8074 SoC and
HK01 evaluation board.

Signed-off-by: Manoharan Vijaya Raghavan <mraghava@codeaurora.org>
Signed-off-by: Abhishek Sahu <absahu@codeaurora.org>
Signed-off-by: Varadarajan Narayanan <varada@codeaurora.org>
---
 arch/arm64/boot/dts/qcom/Makefile         |   1 +
 arch/arm64/boot/dts/qcom/ipq8074-hk01.dts |  53 ++++++++
 arch/arm64/boot/dts/qcom/ipq8074.dtsi     | 194 ++++++++++++++++++++++++++++++
 3 files changed, 248 insertions(+)
 create mode 100644 arch/arm64/boot/dts/qcom/ipq8074-hk01.dts
 create mode 100644 arch/arm64/boot/dts/qcom/ipq8074.dtsi

diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
index cc0f02d..ff81d7e 100644
--- a/arch/arm64/boot/dts/qcom/Makefile
+++ b/arch/arm64/boot/dts/qcom/Makefile
@@ -1,5 +1,6 @@
 dtb-$(CONFIG_ARCH_QCOM)	+= apq8016-sbc.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= apq8096-db820c.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= ipq8074-hk01.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= msm8916-mtp.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= msm8992-bullhead-rev-101.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= msm8994-angler-rev-101.dtb
diff --git a/arch/arm64/boot/dts/qcom/ipq8074-hk01.dts b/arch/arm64/boot/dts/qcom/ipq8074-hk01.dts
new file mode 100644
index 0000000..7d44be9
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/ipq8074-hk01.dts
@@ -0,0 +1,53 @@
+/dts-v1/;
+/* Copyright (c) 2017, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+#include "ipq8074.dtsi"
+
+/ {
+	#address-cells = <0x2>;
+	#size-cells = <0x2>;
+	model = "Qualcomm Technologies, Inc. IPQ8074-HK01";
+	compatible = "qcom,ipq8074-hk01", "qcom,ipq8074";
+	interrupt-parent = <&intc>;
+
+	aliases {
+		serial0 = &blsp1_uart5;
+	};
+
+	chosen {
+		bootargs = "root=/dev/ram0 rw init=/init";
+		stdout-path = "serial0";
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x0 0x40000000 0x0 0x20000000>;
+	};
+
+	soc {
+		pinctrl at 1000000 {
+			serial_4_pins: serial4_pinmux {
+				mux {
+					pins = "gpio23", "gpio24";
+					function = "blsp4_uart1";
+					bias-disable;
+				};
+			};
+		};
+
+		serial at 78b3000 {
+			pinctrl-0 = <&serial_4_pins>;
+			pinctrl-names = "default";
+			status = "ok";
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/ipq8074.dtsi b/arch/arm64/boot/dts/qcom/ipq8074.dtsi
new file mode 100644
index 0000000..2bc5dec
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi
@@ -0,0 +1,194 @@
+/*
+ * Copyright (c) 2017, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/qcom,gcc-ipq8074.h>
+
+/ {
+	model = "Qualcomm Technologies, Inc. IPQ8074";
+	compatible = "qcom,ipq8074";
+
+	soc: soc {
+		#address-cells = <0x1>;
+		#size-cells = <0x1>;
+		ranges = <0 0 0 0xffffffff>;
+		compatible = "simple-bus";
+
+		pinctrl at 1000000 {
+			compatible = "qcom,ipq8074-pinctrl";
+			reg = <0x1000000 0x300000>;
+			interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <0x2>;
+			interrupt-controller;
+			#interrupt-cells = <0x2>;
+		};
+
+		intc: interrupt-controller at b000000 {
+			compatible = "qcom,msm-qgic2";
+			interrupt-controller;
+			#interrupt-cells = <0x3>;
+			reg = <0xb000000 0x1000>, <0xb002000 0x1000>;
+		};
+
+		timer {
+			compatible = "arm,armv8-timer";
+			interrupts = <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+				     <GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+				     <GIC_PPI 4 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+				     <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+		};
+
+		timer at b120000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			compatible = "arm,armv7-timer-mem";
+			reg = <0xb120000 0x1000>;
+			clock-frequency = <19200000>;
+
+			frame at b120000 {
+				frame-number = <0>;
+				interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0xb121000 0x1000>,
+				      <0xb122000 0x1000>;
+			};
+
+			frame at b123000 {
+				frame-number = <1>;
+				interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0xb123000 0x1000>;
+				status = "disabled";
+			};
+
+			frame at b124000 {
+				frame-number = <2>;
+				interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0xb124000 0x1000>;
+				status = "disabled";
+			};
+
+			frame at b125000 {
+				frame-number = <3>;
+				interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0xb125000 0x1000>;
+				status = "disabled";
+			};
+
+			frame at b126000 {
+				frame-number = <4>;
+				interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0xb126000 0x1000>;
+				status = "disabled";
+			};
+
+			frame at b127000 {
+				frame-number = <5>;
+				interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0xb127000 0x1000>;
+				status = "disabled";
+			};
+
+			frame at b128000 {
+				frame-number = <6>;
+				interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0xb128000 0x1000>;
+				status = "disabled";
+			};
+		};
+
+		gcc: gcc at 1800000 {
+			compatible = "qcom,gcc-ipq8074";
+			reg = <0x1800000 0x80000>;
+			#clock-cells = <0x1>;
+			#reset-cells = <0x1>;
+		};
+
+		blsp1_uart5: serial at 78b3000 {
+			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
+			reg = <0x78b3000 0x200>;
+			interrupts = <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_UART5_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			status = "disabled";
+		};
+	};
+
+	cpus {
+		#address-cells = <0x1>;
+		#size-cells = <0x0>;
+
+		CPU0: cpu at 0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53", "arm,armv8";
+			reg = <0x0>;
+			next-level-cache = <&L2_0>;
+			enable-method = "psci";
+		};
+
+		CPU1: cpu at 1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53", "arm,armv8";
+			enable-method = "psci";
+			reg = <0x1>;
+			next-level-cache = <&L2_0>;
+		};
+
+		CPU2: cpu at 2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53", "arm,armv8";
+			enable-method = "psci";
+			reg = <0x2>;
+			next-level-cache = <&L2_0>;
+		};
+
+		CPU3: cpu at 3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53", "arm,armv8";
+			enable-method = "psci";
+			reg = <0x3>;
+			next-level-cache = <&L2_0>;
+		};
+
+		L2_0: l2-cache {
+			compatible = "cache";
+			cache-level = <0x2>;
+		};
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+	};
+
+	pmu {
+		compatible = "arm,armv8-pmuv3";
+		interrupts = <GIC_PPI 7 GIC_CPU_MASK_SIMPLE(4)>;
+	};
+
+	clocks {
+		sleep_clk: sleep_clk {
+			compatible = "fixed-clock";
+			clock-frequency = <32000>;
+			#clock-cells = <0>;
+		};
+
+		xo: xo {
+			compatible = "fixed-clock";
+			clock-frequency = <19200000>;
+			#clock-cells = <0>;
+		};
+	};
+};
-- 
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux Foundation

  parent reply	other threads:[~2017-06-09  9:33 UTC|newest]

Thread overview: 22+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-06-09  9:32 [PATCH v5 0/6] Add minimal boot support for IPQ8074 Varadarajan Narayanan
2017-06-09  9:32 ` Varadarajan Narayanan
2017-06-09  9:32 ` Varadarajan Narayanan
2017-06-09  9:32 ` [PATCH v5 1/6] pinctrl: qcom: Add ipq8074 pinctrl driver Varadarajan Narayanan
2017-06-09  9:32   ` Varadarajan Narayanan
2017-06-29 13:14   ` Linus Walleij
2017-06-29 13:14     ` Linus Walleij
2017-06-29 13:14     ` Linus Walleij
2017-06-29 13:14     ` Linus Walleij
2017-06-09  9:32 ` [PATCH v5 2/6] dt-bindings: qcom: Add ipq8074 bindings Varadarajan Narayanan
2017-06-09  9:32   ` Varadarajan Narayanan
2017-06-09  9:33 ` [PATCH v5 3/6] clk: qcom: Add DT bindings for ipq8074 gcc clock controller Varadarajan Narayanan
2017-06-09  9:33   ` Varadarajan Narayanan
2017-06-09  9:33 ` [PATCH v5 4/6] clk: qcom: Add ipq8074 Global Clock Controller support Varadarajan Narayanan
2017-06-09  9:33   ` Varadarajan Narayanan
     [not found] ` <1497000783-27916-1-git-send-email-varada-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>
2017-06-09  9:33   ` Varadarajan Narayanan [this message]
2017-06-09  9:33     ` [PATCH v5 5/6] arm64: dts: Add ipq8074 SoC and HK01 board support Varadarajan Narayanan
2017-06-09  9:33     ` Varadarajan Narayanan
2017-06-09  9:33 ` [PATCH v5 6/6] arm64: defconfig: Enable qcom ipq8074 clock and pinctrl Varadarajan Narayanan
2017-06-09  9:33   ` Varadarajan Narayanan
  -- strict thread matches above, loose matches on Subject: below --
2017-06-08  5:43 [PATCH v5 0/6] Add minimal boot support for IPQ8074 Varadarajan Narayanan
2017-06-08  5:44 ` [PATCH v5 5/6] arm64: dts: Add ipq8074 SoC and HK01 board support Varadarajan Narayanan
2017-06-08  5:44   ` Varadarajan Narayanan

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1497000783-27916-6-git-send-email-varada@codeaurora.org \
    --to=varada-sgv2jx0feol9jmxxk+q4oq@public.gmane.org \
    --cc=absahu-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org \
    --cc=andy.gross-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org \
    --cc=bjorn.andersson-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org \
    --cc=catalin.marinas-5wv7dgnIgG8@public.gmane.org \
    --cc=david.brown-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org \
    --cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=linus.walleij-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org \
    --cc=linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
    --cc=linux-arm-msm-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=linux-clk-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=linux-gpio-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=linux-soc-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=mark.rutland-5wv7dgnIgG8@public.gmane.org \
    --cc=mraghava-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org \
    --cc=mturquette-rdvid1DuHRBWk0Htik3J/w@public.gmane.org \
    --cc=robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
    --cc=sboyd-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org \
    --cc=sjaganat-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org \
    --cc=sricharan-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org \
    --cc=will.deacon-5wv7dgnIgG8@public.gmane.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.