All of lore.kernel.org
 help / color / mirror / Atom feed
From: Hugues Fruchet <hugues.fruchet@st.com>
To: Maxime Coquelin <mcoquelin.stm32@gmail.com>,
	Alexandre Torgue <alexandre.torgue@st.com>,
	Mauro Carvalho Chehab <mchehab@kernel.org>,
	Hans Verkuil <hverkuil@xs4all.nl>
Cc: <devicetree@vger.kernel.org>,
	<linux-arm-kernel@lists.infradead.org>,
	<linux-kernel@vger.kernel.org>, <linux-media@vger.kernel.org>,
	Benjamin Gaignard <benjamin.gaignard@linaro.org>,
	Yannick Fertre <yannick.fertre@st.com>,
	Hugues Fruchet <hugues.fruchet@st.com>
Subject: [PATCH v1 4/5] ARM: dts: stm32: Enable DCMI support on STM32F746 MCU
Date: Thu, 22 Jun 2017 17:12:50 +0200	[thread overview]
Message-ID: <1498144371-13310-5-git-send-email-hugues.fruchet@st.com> (raw)
In-Reply-To: <1498144371-13310-1-git-send-email-hugues.fruchet@st.com>

Enable DCMI camera interface on STM32F746 MCU.

Signed-off-by: Hugues Fruchet <hugues.fruchet@st.com>
---
 arch/arm/boot/dts/stm32f746.dtsi | 31 +++++++++++++++++++++++++++++++
 1 file changed, 31 insertions(+)

diff --git a/arch/arm/boot/dts/stm32f746.dtsi b/arch/arm/boot/dts/stm32f746.dtsi
index c2765ce..4bdf37c 100644
--- a/arch/arm/boot/dts/stm32f746.dtsi
+++ b/arch/arm/boot/dts/stm32f746.dtsi
@@ -326,6 +326,23 @@
 					bias-disable;
 				};
 			};
+
+			dcmi_pins: dcmi_pins@0 {
+				pins {
+					pinmux = <STM32F746_PA4_FUNC_DCMI_HSYNC>,
+						 <STM32F746_PG9_FUNC_DCMI_VSYNC>,
+						 <STM32F746_PA6_FUNC_DCMI_PIXCLK>,
+						 <STM32F746_PH9_FUNC_DCMI_D0>,
+						 <STM32F746_PH10_FUNC_DCMI_D1>,
+						 <STM32F746_PH11_FUNC_DCMI_D2>,
+						 <STM32F746_PH12_FUNC_DCMI_D3>,
+						 <STM32F746_PH14_FUNC_DCMI_D4>,
+						 <STM32F746_PD3_FUNC_DCMI_D5>,
+						 <STM32F746_PE5_FUNC_DCMI_D6>,
+						 <STM32F746_PE6_FUNC_DCMI_D7>;
+					slew-rate = <3>;
+				};
+			};
 		};
 
 		crc: crc@40023000 {
@@ -344,6 +361,20 @@
 			assigned-clocks = <&rcc 1 CLK_HSE_RTC>;
 			assigned-clock-rates = <1000000>;
 		};
+
+		dcmi: dcmi@50050000 {
+			compatible = "st,stm32-dcmi";
+			reg = <0x50050000 0x400>;
+			interrupts = <78>;
+			resets = <&rcc STM32F7_AHB2_RESET(DCMI)>;
+			clocks = <&rcc 0 STM32F7_AHB2_CLOCK(DCMI)>;
+			clock-names = "mclk";
+			pinctrl-names = "default";
+			pinctrl-0 = <&dcmi_pins>;
+			dmas = <&dma2 1 1 0x414 0x3>;
+			dma-names = "tx";
+			status = "disabled";
+		};
 	};
 };
 
-- 
1.9.1

WARNING: multiple messages have this Message-ID (diff)
From: Hugues Fruchet <hugues.fruchet@st.com>
To: Maxime Coquelin <mcoquelin.stm32@gmail.com>,
	Alexandre Torgue <alexandre.torgue@st.com>,
	Mauro Carvalho Chehab <mchehab@kernel.org>,
	Hans Verkuil <hverkuil@xs4all.nl>
Cc: devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org, linux-media@vger.kernel.org,
	Benjamin Gaignard <benjamin.gaignard@linaro.org>,
	Yannick Fertre <yannick.fertre@st.com>,
	Hugues Fruchet <hugues.fruchet@st.com>
Subject: [PATCH v1 4/5] ARM: dts: stm32: Enable DCMI support on STM32F746 MCU
Date: Thu, 22 Jun 2017 17:12:50 +0200	[thread overview]
Message-ID: <1498144371-13310-5-git-send-email-hugues.fruchet@st.com> (raw)
In-Reply-To: <1498144371-13310-1-git-send-email-hugues.fruchet@st.com>

Enable DCMI camera interface on STM32F746 MCU.

Signed-off-by: Hugues Fruchet <hugues.fruchet@st.com>
---
 arch/arm/boot/dts/stm32f746.dtsi | 31 +++++++++++++++++++++++++++++++
 1 file changed, 31 insertions(+)

diff --git a/arch/arm/boot/dts/stm32f746.dtsi b/arch/arm/boot/dts/stm32f746.dtsi
index c2765ce..4bdf37c 100644
--- a/arch/arm/boot/dts/stm32f746.dtsi
+++ b/arch/arm/boot/dts/stm32f746.dtsi
@@ -326,6 +326,23 @@
 					bias-disable;
 				};
 			};
+
+			dcmi_pins: dcmi_pins@0 {
+				pins {
+					pinmux = <STM32F746_PA4_FUNC_DCMI_HSYNC>,
+						 <STM32F746_PG9_FUNC_DCMI_VSYNC>,
+						 <STM32F746_PA6_FUNC_DCMI_PIXCLK>,
+						 <STM32F746_PH9_FUNC_DCMI_D0>,
+						 <STM32F746_PH10_FUNC_DCMI_D1>,
+						 <STM32F746_PH11_FUNC_DCMI_D2>,
+						 <STM32F746_PH12_FUNC_DCMI_D3>,
+						 <STM32F746_PH14_FUNC_DCMI_D4>,
+						 <STM32F746_PD3_FUNC_DCMI_D5>,
+						 <STM32F746_PE5_FUNC_DCMI_D6>,
+						 <STM32F746_PE6_FUNC_DCMI_D7>;
+					slew-rate = <3>;
+				};
+			};
 		};
 
 		crc: crc@40023000 {
@@ -344,6 +361,20 @@
 			assigned-clocks = <&rcc 1 CLK_HSE_RTC>;
 			assigned-clock-rates = <1000000>;
 		};
+
+		dcmi: dcmi@50050000 {
+			compatible = "st,stm32-dcmi";
+			reg = <0x50050000 0x400>;
+			interrupts = <78>;
+			resets = <&rcc STM32F7_AHB2_RESET(DCMI)>;
+			clocks = <&rcc 0 STM32F7_AHB2_CLOCK(DCMI)>;
+			clock-names = "mclk";
+			pinctrl-names = "default";
+			pinctrl-0 = <&dcmi_pins>;
+			dmas = <&dma2 1 1 0x414 0x3>;
+			dma-names = "tx";
+			status = "disabled";
+		};
 	};
 };
 
-- 
1.9.1

WARNING: multiple messages have this Message-ID (diff)
From: hugues.fruchet@st.com (Hugues Fruchet)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v1 4/5] ARM: dts: stm32: Enable DCMI support on STM32F746 MCU
Date: Thu, 22 Jun 2017 17:12:50 +0200	[thread overview]
Message-ID: <1498144371-13310-5-git-send-email-hugues.fruchet@st.com> (raw)
In-Reply-To: <1498144371-13310-1-git-send-email-hugues.fruchet@st.com>

Enable DCMI camera interface on STM32F746 MCU.

Signed-off-by: Hugues Fruchet <hugues.fruchet@st.com>
---
 arch/arm/boot/dts/stm32f746.dtsi | 31 +++++++++++++++++++++++++++++++
 1 file changed, 31 insertions(+)

diff --git a/arch/arm/boot/dts/stm32f746.dtsi b/arch/arm/boot/dts/stm32f746.dtsi
index c2765ce..4bdf37c 100644
--- a/arch/arm/boot/dts/stm32f746.dtsi
+++ b/arch/arm/boot/dts/stm32f746.dtsi
@@ -326,6 +326,23 @@
 					bias-disable;
 				};
 			};
+
+			dcmi_pins: dcmi_pins at 0 {
+				pins {
+					pinmux = <STM32F746_PA4_FUNC_DCMI_HSYNC>,
+						 <STM32F746_PG9_FUNC_DCMI_VSYNC>,
+						 <STM32F746_PA6_FUNC_DCMI_PIXCLK>,
+						 <STM32F746_PH9_FUNC_DCMI_D0>,
+						 <STM32F746_PH10_FUNC_DCMI_D1>,
+						 <STM32F746_PH11_FUNC_DCMI_D2>,
+						 <STM32F746_PH12_FUNC_DCMI_D3>,
+						 <STM32F746_PH14_FUNC_DCMI_D4>,
+						 <STM32F746_PD3_FUNC_DCMI_D5>,
+						 <STM32F746_PE5_FUNC_DCMI_D6>,
+						 <STM32F746_PE6_FUNC_DCMI_D7>;
+					slew-rate = <3>;
+				};
+			};
 		};
 
 		crc: crc at 40023000 {
@@ -344,6 +361,20 @@
 			assigned-clocks = <&rcc 1 CLK_HSE_RTC>;
 			assigned-clock-rates = <1000000>;
 		};
+
+		dcmi: dcmi at 50050000 {
+			compatible = "st,stm32-dcmi";
+			reg = <0x50050000 0x400>;
+			interrupts = <78>;
+			resets = <&rcc STM32F7_AHB2_RESET(DCMI)>;
+			clocks = <&rcc 0 STM32F7_AHB2_CLOCK(DCMI)>;
+			clock-names = "mclk";
+			pinctrl-names = "default";
+			pinctrl-0 = <&dcmi_pins>;
+			dmas = <&dma2 1 1 0x414 0x3>;
+			dma-names = "tx";
+			status = "disabled";
+		};
 	};
 };
 
-- 
1.9.1

  parent reply	other threads:[~2017-06-22 15:14 UTC|newest]

Thread overview: 40+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-06-22 15:12 [PATCH v1 0/5] Camera support on STM32F746G-DISCO board Hugues Fruchet
2017-06-22 15:12 ` Hugues Fruchet
2017-06-22 15:12 ` Hugues Fruchet
2017-06-22 15:12 ` [PATCH v1 1/5] [media] stm32-dcmi: catch dma submission error Hugues Fruchet
2017-06-22 15:12   ` Hugues Fruchet
2017-06-22 15:12   ` Hugues Fruchet
2017-06-22 15:12 ` [PATCH v1 2/5] [media] stm32-dcmi: revisit control register handling Hugues Fruchet
2017-06-22 15:12   ` Hugues Fruchet
2017-06-22 15:12   ` Hugues Fruchet
2017-06-22 15:12 ` [PATCH v1 3/5] [media] stm32-dcmi: crop sensor image to match user resolution Hugues Fruchet
2017-06-22 15:12   ` Hugues Fruchet
2017-06-22 15:12   ` Hugues Fruchet
2017-06-22 15:19   ` Hans Verkuil
2017-06-22 15:19     ` Hans Verkuil
2017-06-26  9:53     ` Hugues FRUCHET
2017-06-26  9:53       ` Hugues FRUCHET
2017-06-26  9:53       ` Hugues FRUCHET
2017-06-26  9:53       ` Hugues FRUCHET
2017-06-26 10:07       ` Hans Verkuil
2017-06-26 10:07         ` Hans Verkuil
2017-06-26 10:07         ` Hans Verkuil
2017-06-26 14:41         ` Hugues FRUCHET
2017-06-26 14:41           ` Hugues FRUCHET
2017-06-26 14:41           ` Hugues FRUCHET
2017-06-26 14:41           ` Hugues FRUCHET
2017-06-25 15:02   ` [PATCH] stm32-dcmi: fix semicolon.cocci warnings kbuild test robot
2017-06-25 15:02     ` kbuild test robot
2017-06-25 15:02     ` kbuild test robot
2017-06-25 15:02   ` [PATCH v1 3/5] [media] stm32-dcmi: crop sensor image to match user resolution kbuild test robot
2017-06-25 15:02     ` kbuild test robot
2017-06-25 15:02     ` kbuild test robot
2017-06-22 15:12 ` Hugues Fruchet [this message]
2017-06-22 15:12   ` [PATCH v1 4/5] ARM: dts: stm32: Enable DCMI support on STM32F746 MCU Hugues Fruchet
2017-06-22 15:12   ` Hugues Fruchet
2017-07-02  0:40   ` kbuild test robot
2017-07-02  0:40     ` kbuild test robot
2017-07-02  0:40     ` kbuild test robot
2017-06-22 15:12 ` [PATCH v1 5/5] ARM: configs: stm32: DCMI + OV9655 camera support Hugues Fruchet
2017-06-22 15:12   ` Hugues Fruchet
2017-06-22 15:12   ` Hugues Fruchet

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1498144371-13310-5-git-send-email-hugues.fruchet@st.com \
    --to=hugues.fruchet@st.com \
    --cc=alexandre.torgue@st.com \
    --cc=benjamin.gaignard@linaro.org \
    --cc=devicetree@vger.kernel.org \
    --cc=hverkuil@xs4all.nl \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-media@vger.kernel.org \
    --cc=mchehab@kernel.org \
    --cc=mcoquelin.stm32@gmail.com \
    --cc=yannick.fertre@st.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.