[Qemu-devel] [PATCH v5 0/3] Add bitmap for received pages in postcopy migration

[Qemu-devel] [PATCH v5 0/3] Add bitmap for received pages in postcopy migration

[Alexey Perevalov]

This is 5th version of
[PATCH v1 0/2] Add bitmap for copied pages in postcopy migration
cover message from there

This is a separate patch set, it derived from
https://www.mail-archive.com/qemu-devel@nongnu.org/msg456004.html

There are several possible use cases:
1. solve issue with postcopy live migration and shared memory.
OVS-VSWITCH requires information about copied pages, to fallocate
newly allocated pages.
2. calculation vCPU blocktime
for more details see
https://www.mail-archive.com/qemu-devel@nongnu.org/msg456004.html
3. Recovery after fail in the middle of postcopy migration 

Declaration is placed in two places include/migration/migration.h and into
migration/postcopy-ram.h, because some functions are required in virtio and
into public function include/exec/ram_addr.h.

----------------------------------------------------------------
V4 -> V5
    - remove ramblock_recv_bitmap_clear_range in favor to bitmap_clear (comment from David)
    - single invocation place for ramblock_recv_bitmap_set (comment from Peter)
    - minor changes like removing comment from qemu_ufd_copy_ioctl and local variable from
ramblock_recv_map_init (comment from Peter)

V3 -> V4
    - clear_bit instead of ramblock_recv_bitmap_clear in ramblock_recv_bitmap_clear_range,
it reduced number of operation (comment from Juan)
    - for postcopy ramblock_recv_bitmap_set is calling after page was copied,
only in case of success (comment from David)
    - indentation fixes (comment from Juan)

V2 -> V3
    - ramblock_recv_map_init call is placed into migration_incoming_get_current,
looks like it's general place for both precopy and postcopy case.
    - received bitmap memory releasing is placed into ram_load_cleanup,
unfortunatelly, it calls only in case of precopy.
    - precopy case and discard ram block case
    - function renaming, and another minor cleanups

V1 -> V2
    - change in terminology s/copied/received/g
    - granularity became TARGET_PAGE_SIZE, but not actual page size of the
ramblock
    - movecopiedmap & get_copiedmap_size were removed, until patch set where
it will be necessary
    - releasing memory of receivedmap was added into ram_load_cleanup
    - new patch "migration: introduce qemu_ufd_copy_ioctl helper"

Patchset is based on Juan's patchset:
[PATCH v2 0/5] Create setup/cleanup methods for migration incoming side

Alexey Perevalov (3):
  migration: postcopy_place_page factoring out
  migration: introduce qemu_ufd_copy_ioctl helper
  migration: add bitmap for received page

 include/exec/ram_addr.h  | 10 +++++++++
 migration/migration.c    |  1 +
 migration/postcopy-ram.c | 53 +++++++++++++++++++++++++++++++-----------------
 migration/postcopy-ram.h |  4 ++--
 migration/ram.c          | 46 ++++++++++++++++++++++++++++++++++++-----
 migration/ram.h          |  6 ++++++
 6 files changed, 94 insertions(+), 26 deletions(-)

-- 
1.8.3.1

[Qemu-devel] [PATCH v5 1/3] migration: postcopy_place_page factoring out

[Alexey Perevalov]

Need to mark copied pages as closer as possible to the place where it
tracks down. That will be necessary in futher patch.

Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Alexey Perevalov <a.perevalov@samsung.com>
---
 migration/postcopy-ram.c | 13 +++++++------
 migration/postcopy-ram.h |  4 ++--
 migration/ram.c          |  4 ++--
 3 files changed, 11 insertions(+), 10 deletions(-)

diff --git a/migration/postcopy-ram.c b/migration/postcopy-ram.c
index c8c4500..dae41b5 100644
--- a/migration/postcopy-ram.c
+++ b/migration/postcopy-ram.c
@@ -566,9 +566,10 @@ int postcopy_ram_enable_notify(MigrationIncomingState *mis)
  * returns 0 on success
  */
 int postcopy_place_page(MigrationIncomingState *mis, void *host, void *from,
-                        size_t pagesize)
+                        RAMBlock *rb)
 {
     struct uffdio_copy copy_struct;
+    size_t pagesize = qemu_ram_pagesize(rb);
 
     copy_struct.dst = (uint64_t)(uintptr_t)host;
     copy_struct.src = (uint64_t)(uintptr_t)from;
@@ -597,11 +598,11 @@ int postcopy_place_page(MigrationIncomingState *mis, void *host, void *from,
  * returns 0 on success
  */
 int postcopy_place_page_zero(MigrationIncomingState *mis, void *host,
-                             size_t pagesize)
+                             RAMBlock *rb)
 {
     trace_postcopy_place_page_zero(host);
 
-    if (pagesize == getpagesize()) {
+    if (qemu_ram_pagesize(rb) == getpagesize()) {
         struct uffdio_zeropage zero_struct;
         zero_struct.range.start = (uint64_t)(uintptr_t)host;
         zero_struct.range.len = getpagesize();
@@ -631,7 +632,7 @@ int postcopy_place_page_zero(MigrationIncomingState *mis, void *host,
             memset(mis->postcopy_tmp_zero_page, '\0', mis->largest_page_size);
         }
         return postcopy_place_page(mis, host, mis->postcopy_tmp_zero_page,
-                                   pagesize);
+                                   rb);
     }
 
     return 0;
@@ -694,14 +695,14 @@ int postcopy_ram_enable_notify(MigrationIncomingState *mis)
 }
 
 int postcopy_place_page(MigrationIncomingState *mis, void *host, void *from,
-                        size_t pagesize)
+                        RAMBlock *rb)
 {
     assert(0);
     return -1;
 }
 
 int postcopy_place_page_zero(MigrationIncomingState *mis, void *host,
-                        size_t pagesize)
+                        RAMBlock *rb)
 {
     assert(0);
     return -1;
diff --git a/migration/postcopy-ram.h b/migration/postcopy-ram.h
index 52d51e8..78a3591 100644
--- a/migration/postcopy-ram.h
+++ b/migration/postcopy-ram.h
@@ -72,14 +72,14 @@ void postcopy_discard_send_finish(MigrationState *ms,
  * returns 0 on success
  */
 int postcopy_place_page(MigrationIncomingState *mis, void *host, void *from,
-                        size_t pagesize);
+                        RAMBlock *rb);
 
 /*
  * Place a zero page at (host) atomically
  * returns 0 on success
  */
 int postcopy_place_page_zero(MigrationIncomingState *mis, void *host,
-                             size_t pagesize);
+                             RAMBlock *rb);
 
 /* The current postcopy state is read/set by postcopy_state_get/set
  * which update it atomically.
diff --git a/migration/ram.c b/migration/ram.c
index 8dbdfdb..f50479d 100644
--- a/migration/ram.c
+++ b/migration/ram.c
@@ -2465,10 +2465,10 @@ static int ram_load_postcopy(QEMUFile *f)
 
             if (all_zero) {
                 ret = postcopy_place_page_zero(mis, place_dest,
-                                               block->page_size);
+                                               block);
             } else {
                 ret = postcopy_place_page(mis, place_dest,
-                                          place_source, block->page_size);
+                                          place_source, block);
             }
         }
         if (!ret) {
-- 
1.8.3.1

[Qemu-devel] [PATCH v5 2/3] migration: introduce qemu_ufd_copy_ioctl helper

[Alexey Perevalov]

Just for placing auxilary operations inside helper,
auxilary operations like: track received pages,
notify about copying operation in futher patches.

Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Alexey Perevalov <a.perevalov@samsung.com>
---
 migration/postcopy-ram.c | 34 +++++++++++++++++++++-------------
 1 file changed, 21 insertions(+), 13 deletions(-)

diff --git a/migration/postcopy-ram.c b/migration/postcopy-ram.c
index dae41b5..293db97 100644
--- a/migration/postcopy-ram.c
+++ b/migration/postcopy-ram.c
@@ -561,6 +561,25 @@ int postcopy_ram_enable_notify(MigrationIncomingState *mis)
     return 0;
 }
 
+static int qemu_ufd_copy_ioctl(int userfault_fd, void *host_addr,
+        void *from_addr, uint64_t pagesize)
+{
+    if (from_addr) {
+        struct uffdio_copy copy_struct;
+        copy_struct.dst = (uint64_t)(uintptr_t)host_addr;
+        copy_struct.src = (uint64_t)(uintptr_t)from_addr;
+        copy_struct.len = pagesize;
+        copy_struct.mode = 0;
+        return ioctl(userfault_fd, UFFDIO_COPY, &copy_struct);
+    } else {
+        struct uffdio_zeropage zero_struct;
+        zero_struct.range.start = (uint64_t)(uintptr_t)host_addr;
+        zero_struct.range.len = pagesize;
+        zero_struct.mode = 0;
+        return ioctl(userfault_fd, UFFDIO_ZEROPAGE, &zero_struct);
+    }
+}
+
 /*
  * Place a host page (from) at (host) atomically
  * returns 0 on success
@@ -568,20 +587,14 @@ int postcopy_ram_enable_notify(MigrationIncomingState *mis)
 int postcopy_place_page(MigrationIncomingState *mis, void *host, void *from,
                         RAMBlock *rb)
 {
-    struct uffdio_copy copy_struct;
     size_t pagesize = qemu_ram_pagesize(rb);
 
-    copy_struct.dst = (uint64_t)(uintptr_t)host;
-    copy_struct.src = (uint64_t)(uintptr_t)from;
-    copy_struct.len = pagesize;
-    copy_struct.mode = 0;
-
     /* copy also acks to the kernel waking the stalled thread up
      * TODO: We can inhibit that ack and only do it if it was requested
      * which would be slightly cheaper, but we'd have to be careful
      * of the order of updating our page state.
      */
-    if (ioctl(mis->userfault_fd, UFFDIO_COPY, &copy_struct)) {
+    if (qemu_ufd_copy_ioctl(mis->userfault_fd, host, from, pagesize)) {
         int e = errno;
         error_report("%s: %s copy host: %p from: %p (size: %zd)",
                      __func__, strerror(e), host, from, pagesize);
@@ -603,12 +616,7 @@ int postcopy_place_page_zero(MigrationIncomingState *mis, void *host,
     trace_postcopy_place_page_zero(host);
 
     if (qemu_ram_pagesize(rb) == getpagesize()) {
-        struct uffdio_zeropage zero_struct;
-        zero_struct.range.start = (uint64_t)(uintptr_t)host;
-        zero_struct.range.len = getpagesize();
-        zero_struct.mode = 0;
-
-        if (ioctl(mis->userfault_fd, UFFDIO_ZEROPAGE, &zero_struct)) {
+        if (qemu_ufd_copy_ioctl(mis->userfault_fd, host, NULL, getpagesize())) {
             int e = errno;
             error_report("%s: %s zero host: %p",
                          __func__, strerror(e), host);
-- 
1.8.3.1

[Qemu-devel] [PATCH v5 3/3] migration: add bitmap for received page

[Alexey Perevalov]

This patch adds ability to track down already received
pages, it's necessary for calculation vCPU block time in
postcopy migration feature, maybe for restore after
postcopy migration failure.
Also it's necessary to solve shared memory issue in
postcopy livemigration. Information about received pages
will be transferred to the software virtual bridge
(e.g. OVS-VSWITCHD), to avoid fallocate (unmap) for
already received pages. fallocate syscall is required for
remmaped shared memory, due to remmaping itself blocks
ioctl(UFFDIO_COPY, ioctl in this case will end with EEXIT
error (struct page is exists after remmap).

Bitmap is placed into RAMBlock as another postcopy/precopy
related bitmaps.

Signed-off-by: Alexey Perevalov <a.perevalov@samsung.com>
---
 include/exec/ram_addr.h  | 10 ++++++++++
 migration/migration.c    |  1 +
 migration/postcopy-ram.c | 16 +++++++++++-----
 migration/ram.c          | 42 +++++++++++++++++++++++++++++++++++++++---
 migration/ram.h          |  6 ++++++
 5 files changed, 67 insertions(+), 8 deletions(-)

diff --git a/include/exec/ram_addr.h b/include/exec/ram_addr.h
index 140efa8..4170656 100644
--- a/include/exec/ram_addr.h
+++ b/include/exec/ram_addr.h
@@ -47,6 +47,8 @@ struct RAMBlock {
      * of the postcopy phase
      */
     unsigned long *unsentmap;
+    /* bitmap of already received pages in postcopy */
+    unsigned long *receivedmap;
 };
 
 static inline bool offset_in_ramblock(RAMBlock *b, ram_addr_t offset)
@@ -60,6 +62,14 @@ static inline void *ramblock_ptr(RAMBlock *block, ram_addr_t offset)
     return (char *)block->host + offset;
 }
 
+static inline unsigned long int ramblock_recv_bitmap_offset(void *host_addr,
+                                                            RAMBlock *rb)
+{
+    uint64_t host_addr_offset =
+            (uint64_t)(uintptr_t)(host_addr - (void *)rb->host);
+    return host_addr_offset >> TARGET_PAGE_BITS;
+}
+
 long qemu_getrampagesize(void);
 unsigned long last_ram_page(void);
 RAMBlock *qemu_ram_alloc_from_file(ram_addr_t size, MemoryRegion *mr,
diff --git a/migration/migration.c b/migration/migration.c
index 71e38bc..53fbd41 100644
--- a/migration/migration.c
+++ b/migration/migration.c
@@ -143,6 +143,7 @@ MigrationIncomingState *migration_incoming_get_current(void)
         qemu_mutex_init(&mis_current.rp_mutex);
         qemu_event_init(&mis_current.main_thread_load_event, false);
         once = true;
+        ramblock_recv_map_init();
     }
     return &mis_current;
 }
diff --git a/migration/postcopy-ram.c b/migration/postcopy-ram.c
index 293db97..f980d93 100644
--- a/migration/postcopy-ram.c
+++ b/migration/postcopy-ram.c
@@ -562,22 +562,27 @@ int postcopy_ram_enable_notify(MigrationIncomingState *mis)
 }
 
 static int qemu_ufd_copy_ioctl(int userfault_fd, void *host_addr,
-        void *from_addr, uint64_t pagesize)
+                               void *from_addr, uint64_t pagesize, RAMBlock *rb)
 {
+    int ret;
     if (from_addr) {
         struct uffdio_copy copy_struct;
         copy_struct.dst = (uint64_t)(uintptr_t)host_addr;
         copy_struct.src = (uint64_t)(uintptr_t)from_addr;
         copy_struct.len = pagesize;
         copy_struct.mode = 0;
-        return ioctl(userfault_fd, UFFDIO_COPY, &copy_struct);
+        ret = ioctl(userfault_fd, UFFDIO_COPY, &copy_struct);
     } else {
         struct uffdio_zeropage zero_struct;
         zero_struct.range.start = (uint64_t)(uintptr_t)host_addr;
         zero_struct.range.len = pagesize;
         zero_struct.mode = 0;
-        return ioctl(userfault_fd, UFFDIO_ZEROPAGE, &zero_struct);
+        ret = ioctl(userfault_fd, UFFDIO_ZEROPAGE, &zero_struct);
+    }
+    if (!ret) {
+        ramblock_recv_bitmap_set(host_addr, rb);
     }
+    return ret;
 }
 
 /*
@@ -594,7 +599,7 @@ int postcopy_place_page(MigrationIncomingState *mis, void *host, void *from,
      * which would be slightly cheaper, but we'd have to be careful
      * of the order of updating our page state.
      */
-    if (qemu_ufd_copy_ioctl(mis->userfault_fd, host, from, pagesize)) {
+    if (qemu_ufd_copy_ioctl(mis->userfault_fd, host, from, pagesize, rb)) {
         int e = errno;
         error_report("%s: %s copy host: %p from: %p (size: %zd)",
                      __func__, strerror(e), host, from, pagesize);
@@ -616,7 +621,8 @@ int postcopy_place_page_zero(MigrationIncomingState *mis, void *host,
     trace_postcopy_place_page_zero(host);
 
     if (qemu_ram_pagesize(rb) == getpagesize()) {
-        if (qemu_ufd_copy_ioctl(mis->userfault_fd, host, NULL, getpagesize())) {
+        if (qemu_ufd_copy_ioctl(mis->userfault_fd, host, NULL, getpagesize(),
+                                rb)) {
             int e = errno;
             error_report("%s: %s zero host: %p",
                          __func__, strerror(e), host);
diff --git a/migration/ram.c b/migration/ram.c
index f50479d..95962a0 100644
--- a/migration/ram.c
+++ b/migration/ram.c
@@ -151,6 +151,32 @@ out:
     return ret;
 }
 
+void ramblock_recv_map_init(void)
+{
+    RAMBlock *rb;
+
+    RAMBLOCK_FOREACH(rb) {
+        assert(!rb->receivedmap);
+        rb->receivedmap = bitmap_new(rb->max_length >> TARGET_PAGE_BITS);
+    }
+}
+
+int ramblock_recv_bitmap_test(void *host_addr, RAMBlock *rb)
+{
+    return test_bit(ramblock_recv_bitmap_offset(host_addr, rb),
+                    rb->receivedmap);
+}
+
+void ramblock_recv_bitmap_set(void *host_addr, RAMBlock *rb)
+{
+    set_bit_atomic(ramblock_recv_bitmap_offset(host_addr, rb), rb->receivedmap);
+}
+
+void ramblock_recv_bitmap_clear(void *host_addr, RAMBlock *rb)
+{
+    clear_bit(ramblock_recv_bitmap_offset(host_addr, rb), rb->receivedmap);
+}
+
 /*
  * An outstanding page request, on the source, having been received
  * and queued
@@ -1797,6 +1823,8 @@ int ram_discard_range(const char *rbname, uint64_t start, size_t length)
         goto err;
     }
 
+    bitmap_clear(rb->receivedmap, start >> TARGET_PAGE_BITS,
+                 length >> TARGET_PAGE_BITS);
     ret = ram_block_discard_range(rb, start, length);
 
 err:
@@ -2324,8 +2352,14 @@ static int ram_load_setup(QEMUFile *f, void *opaque)
 
 static int ram_load_cleanup(void *opaque)
 {
+    RAMBlock *rb;
     xbzrle_load_cleanup();
     compress_threads_load_cleanup();
+
+    RAMBLOCK_FOREACH(rb) {
+        g_free(rb->receivedmap);
+        rb->receivedmap = NULL;
+    }
     return 0;
 }
 
@@ -2513,6 +2547,7 @@ static int ram_load(QEMUFile *f, void *opaque, int version_id)
         ram_addr_t addr, total_ram_bytes;
         void *host = NULL;
         uint8_t ch;
+        RAMBlock *rb = NULL;
 
         addr = qemu_get_be64(f);
         flags = addr & ~TARGET_PAGE_MASK;
@@ -2520,15 +2555,16 @@ static int ram_load(QEMUFile *f, void *opaque, int version_id)
 
         if (flags & (RAM_SAVE_FLAG_ZERO | RAM_SAVE_FLAG_PAGE |
                      RAM_SAVE_FLAG_COMPRESS_PAGE | RAM_SAVE_FLAG_XBZRLE)) {
-            RAMBlock *block = ram_block_from_stream(f, flags);
+            rb = ram_block_from_stream(f, flags);
 
-            host = host_from_ram_block_offset(block, addr);
+            host = host_from_ram_block_offset(rb, addr);
             if (!host) {
                 error_report("Illegal RAM offset " RAM_ADDR_FMT, addr);
                 ret = -EINVAL;
                 break;
             }
-            trace_ram_load_loop(block->idstr, (uint64_t)addr, flags, host);
+            ramblock_recv_bitmap_set(host, rb);
+            trace_ram_load_loop(rb->idstr, (uint64_t)addr, flags, host);
         }
 
         switch (flags & ~RAM_SAVE_FLAG_CONTINUE) {
diff --git a/migration/ram.h b/migration/ram.h
index c081fde..98d68df 100644
--- a/migration/ram.h
+++ b/migration/ram.h
@@ -52,4 +52,10 @@ int ram_discard_range(const char *block_name, uint64_t start, size_t length);
 int ram_postcopy_incoming_init(MigrationIncomingState *mis);
 
 void ram_handle_compressed(void *host, uint8_t ch, uint64_t size);
+
+void ramblock_recv_map_init(void);
+int ramblock_recv_bitmap_test(void *host_addr, RAMBlock *rb);
+void ramblock_recv_bitmap_set(void *host_addr, RAMBlock *rb);
+void ramblock_recv_bitmap_clear(void *host_addr, RAMBlock *rb);
+
 #endif
-- 
1.8.3.1

Re: [Qemu-devel] [PATCH v5 3/3] migration: add bitmap for received page

[Peter Xu]

On Tue, Jun 27, 2017 at 05:50:27AM -0400, Alexey Perevalov wrote:

[...]

> @@ -60,6 +62,14 @@ static inline void *ramblock_ptr(RAMBlock *block, ram_addr_t offset)
>      return (char *)block->host + offset;
>  }
>  
> +static inline unsigned long int ramblock_recv_bitmap_offset(void *host_addr,
> +                                                            RAMBlock *rb)
> +{
> +    uint64_t host_addr_offset =
> +            (uint64_t)(uintptr_t)(host_addr - (void *)rb->host);
> +    return host_addr_offset >> TARGET_PAGE_BITS;
> +}
> +
>  long qemu_getrampagesize(void);
>  unsigned long last_ram_page(void);
>  RAMBlock *qemu_ram_alloc_from_file(ram_addr_t size, MemoryRegion *mr,
> diff --git a/migration/migration.c b/migration/migration.c
> index 71e38bc..53fbd41 100644
> --- a/migration/migration.c
> +++ b/migration/migration.c
> @@ -143,6 +143,7 @@ MigrationIncomingState *migration_incoming_get_current(void)
>          qemu_mutex_init(&mis_current.rp_mutex);
>          qemu_event_init(&mis_current.main_thread_load_event, false);
>          once = true;
> +        ramblock_recv_map_init();

One tiny more comment: shall we init this at the beginning of incoming
migration? Maybe into migration_fd_process_incoming(), before entering
the coroutine?

Then, for the destruction of it below...

[...]

> @@ -2324,8 +2352,14 @@ static int ram_load_setup(QEMUFile *f, void *opaque)
>  
>  static int ram_load_cleanup(void *opaque)
>  {
> +    RAMBlock *rb;
>      xbzrle_load_cleanup();
>      compress_threads_load_cleanup();
> +
> +    RAMBLOCK_FOREACH(rb) {
> +        g_free(rb->receivedmap);
> +        rb->receivedmap = NULL;
> +    }

... maybe move to migration_incoming_state_destroy()?

And, I didn't really find ram_load_cleanup() in my repo. Am I missing
something?

Other than above, this patch looks good to me.  Thanks,

-- 
Peter Xu

Re: [Qemu-devel] [PATCH v5 3/3] migration: add bitmap for received page

[Alexey]

On Tue, Jun 27, 2017 at 06:17:40PM +0800, Peter Xu wrote:
> On Tue, Jun 27, 2017 at 05:50:27AM -0400, Alexey Perevalov wrote:
> 
> [...]
> 
> > @@ -60,6 +62,14 @@ static inline void *ramblock_ptr(RAMBlock *block, ram_addr_t offset)
> >      return (char *)block->host + offset;
> >  }
> >  
> > +static inline unsigned long int ramblock_recv_bitmap_offset(void *host_addr,
> > +                                                            RAMBlock *rb)
> > +{
> > +    uint64_t host_addr_offset =
> > +            (uint64_t)(uintptr_t)(host_addr - (void *)rb->host);
> > +    return host_addr_offset >> TARGET_PAGE_BITS;
> > +}
> > +
> >  long qemu_getrampagesize(void);
> >  unsigned long last_ram_page(void);
> >  RAMBlock *qemu_ram_alloc_from_file(ram_addr_t size, MemoryRegion *mr,
> > diff --git a/migration/migration.c b/migration/migration.c
> > index 71e38bc..53fbd41 100644
> > --- a/migration/migration.c
> > +++ b/migration/migration.c
> > @@ -143,6 +143,7 @@ MigrationIncomingState *migration_incoming_get_current(void)
> >          qemu_mutex_init(&mis_current.rp_mutex);
> >          qemu_event_init(&mis_current.main_thread_load_event, false);
> >          once = true;
> > +        ramblock_recv_map_init();
> 
> One tiny more comment: shall we init this at the beginning of incoming
> migration? Maybe into migration_fd_process_incoming(), before entering
> the coroutine?
maybe this function (migration_incoming_get_current) is not best place
to initialize something in ramblock list from point of
view maintainability.
> 
> Then, for the destruction of it below...
> 
> [...]
> 
> > @@ -2324,8 +2352,14 @@ static int ram_load_setup(QEMUFile *f, void *opaque)
> >  
> >  static int ram_load_cleanup(void *opaque)
> >  {
> > +    RAMBlock *rb;
> >      xbzrle_load_cleanup();
> >      compress_threads_load_cleanup();
> > +
> > +    RAMBLOCK_FOREACH(rb) {
> > +        g_free(rb->receivedmap);
> > +        rb->receivedmap = NULL;
> > +    }
> 
> ... maybe move to migration_incoming_state_destroy()?
I'll think about it, because ram_load_cleanup in current Juan's
patch set is not calling in postcopy scenario.

> 
> And, I didn't really find ram_load_cleanup() in my repo. Am I missing
> something?
you need Juan's [PATCH v2 0/5] Create setup/cleanup methods for
migration incoming side

> 
> Other than above, this patch looks good to me.  Thanks,
> 
> -- 
> Peter Xu
> 

-- 

BR
Alexey

Re: [Qemu-devel] [PATCH v5 3/3] migration: add bitmap for received page

[Juan Quintela]

Peter Xu <peterx@redhat.com> wrote:
> On Tue, Jun 27, 2017 at 05:50:27AM -0400, Alexey Perevalov wrote:
>
> [...]
>
>> @@ -60,6 +62,14 @@ static inline void *ramblock_ptr(RAMBlock *block, ram_addr_t offset)
>>      return (char *)block->host + offset;
>>  }
>>  
>> +static inline unsigned long int ramblock_recv_bitmap_offset(void *host_addr,
>> +                                                            RAMBlock *rb)
>> +{
>> +    uint64_t host_addr_offset =
>> +            (uint64_t)(uintptr_t)(host_addr - (void *)rb->host);
>> +    return host_addr_offset >> TARGET_PAGE_BITS;
>> +}
>> +
>>  long qemu_getrampagesize(void);
>>  unsigned long last_ram_page(void);
>>  RAMBlock *qemu_ram_alloc_from_file(ram_addr_t size, MemoryRegion *mr,
>> diff --git a/migration/migration.c b/migration/migration.c
>> index 71e38bc..53fbd41 100644
>> --- a/migration/migration.c
>> +++ b/migration/migration.c
>> @@ -143,6 +143,7 @@ MigrationIncomingState *migration_incoming_get_current(void)
>>          qemu_mutex_init(&mis_current.rp_mutex);
>>          qemu_event_init(&mis_current.main_thread_load_event, false);
>>          once = true;
>> +        ramblock_recv_map_init();
>
> One tiny more comment: shall we init this at the beginning of incoming
> migration? Maybe into migration_fd_process_incoming(), before entering
> the coroutine?
>
> Then, for the destruction of it below...
>
> [...]
>
>> @@ -2324,8 +2352,14 @@ static int ram_load_setup(QEMUFile *f, void *opaque)
>>  
>>  static int ram_load_cleanup(void *opaque)
>>  {
>> +    RAMBlock *rb;
>>      xbzrle_load_cleanup();
>>      compress_threads_load_cleanup();
>> +
>> +    RAMBLOCK_FOREACH(rb) {
>> +        g_free(rb->receivedmap);
>> +        rb->receivedmap = NULL;
>> +    }
>
> ... maybe move to migration_incoming_state_destroy()?
>
> And, I didn't really find ram_load_cleanup() in my repo. Am I missing
> something?

On top of my load_setup patches.

>
> Other than above, this patch looks good to me.  Thanks,

Later, Juan.

Re: [Qemu-devel] [PATCH v5 3/3] migration: add bitmap for received page

[Peter Xu]

On Tue, Jun 27, 2017 at 01:40:58PM +0300, Alexey wrote:
> On Tue, Jun 27, 2017 at 06:17:40PM +0800, Peter Xu wrote:
> > On Tue, Jun 27, 2017 at 05:50:27AM -0400, Alexey Perevalov wrote:
> > 
> > [...]
> > 
> > > @@ -60,6 +62,14 @@ static inline void *ramblock_ptr(RAMBlock *block, ram_addr_t offset)
> > >      return (char *)block->host + offset;
> > >  }
> > >  
> > > +static inline unsigned long int ramblock_recv_bitmap_offset(void *host_addr,
> > > +                                                            RAMBlock *rb)
> > > +{
> > > +    uint64_t host_addr_offset =
> > > +            (uint64_t)(uintptr_t)(host_addr - (void *)rb->host);
> > > +    return host_addr_offset >> TARGET_PAGE_BITS;
> > > +}
> > > +
> > >  long qemu_getrampagesize(void);
> > >  unsigned long last_ram_page(void);
> > >  RAMBlock *qemu_ram_alloc_from_file(ram_addr_t size, MemoryRegion *mr,
> > > diff --git a/migration/migration.c b/migration/migration.c
> > > index 71e38bc..53fbd41 100644
> > > --- a/migration/migration.c
> > > +++ b/migration/migration.c
> > > @@ -143,6 +143,7 @@ MigrationIncomingState *migration_incoming_get_current(void)
> > >          qemu_mutex_init(&mis_current.rp_mutex);
> > >          qemu_event_init(&mis_current.main_thread_load_event, false);
> > >          once = true;
> > > +        ramblock_recv_map_init();
> > 
> > One tiny more comment: shall we init this at the beginning of incoming
> > migration? Maybe into migration_fd_process_incoming(), before entering
> > the coroutine?
> maybe this function (migration_incoming_get_current) is not best place
> to initialize something in ramblock list from point of
> view maintainability.

Yes, the point is, it is only inited once per QEMU instance, while
actually it should be inited for each incoming migration procedure
(though I think yes we will normally have one incoming migration per
QEMU instance...).

> > 
> > Then, for the destruction of it below...
> > 
> > [...]
> > 
> > > @@ -2324,8 +2352,14 @@ static int ram_load_setup(QEMUFile *f, void *opaque)
> > >  
> > >  static int ram_load_cleanup(void *opaque)
> > >  {
> > > +    RAMBlock *rb;
> > >      xbzrle_load_cleanup();
> > >      compress_threads_load_cleanup();
> > > +
> > > +    RAMBLOCK_FOREACH(rb) {
> > > +        g_free(rb->receivedmap);
> > > +        rb->receivedmap = NULL;
> > > +    }
> > 
> > ... maybe move to migration_incoming_state_destroy()?
> I'll think about it, because ram_load_cleanup in current Juan's
> patch set is not calling in postcopy scenario.

Sure.

> 
> > 
> > And, I didn't really find ram_load_cleanup() in my repo. Am I missing
> > something?
> you need Juan's [PATCH v2 0/5] Create setup/cleanup methods for
> migration incoming side

Ok. Then no problem. Thanks,

> 
> > 
> > Other than above, this patch looks good to me.  Thanks,
> > 
> > -- 
> > Peter Xu
> > 
> 
> -- 
> 
> BR
> Alexey

-- 
Peter Xu