[PATCH v2] Add support of all Foxconn (105b) Broadcom devices

[PATCH v2] Add support of all Foxconn (105b) Broadcom devices

[Dmitry Tunin]

There is another device

T:  Bus=01 Lev=02 Prnt=02 Port=00 Cnt=01 Dev#=  3 Spd=12  MxCh= 0
D:  Ver= 2.00 Cls=ff(vend.) Sub=01 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=105b ProdID=e066 Rev=01.12
S:  Manufacturer=Broadcom Corp
S:  Product=BCM20702A0
S:  SerialNumber=342387DAE35E
C:  #Ifs= 4 Cfg#= 1 Atr=e0 MxPwr=0mA
I:  If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=01 Prot=01 Driver=(none)
I:  If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=(none)
I:  If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
I:  If#= 3 Alt= 0 #EPs= 0 Cls=fe(app. ) Sub=01 Prot=01 Driver=(none)

Since we have Cls=ff, we can add all of them.

Signed-off-by: Dmitry Tunin <hanipouspilot@gmail.com>
---
 drivers/bluetooth/btusb.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
index fa24d69..b1e01b0 100644
--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -131,7 +131,8 @@ static const struct usb_device_id btusb_table[] = {
 	{ USB_DEVICE(0x19ff, 0x0239), .driver_info = BTUSB_BCM_PATCHRAM },
 
 	/* Broadcom BCM43142A0 (Foxconn/Lenovo) */
-	{ USB_DEVICE(0x105b, 0xe065), .driver_info = BTUSB_BCM_PATCHRAM },
+	{ USB_VENDOR_AND_INTERFACE_INFO(0x105b, 0xff, 0x01, 0x01),
+	  .driver_info = BTUSB_BCM_PATCHRAM },
 
 	/* Broadcom BCM920703 (HTC Vive) */
 	{ USB_VENDOR_AND_INTERFACE_INFO(0x0bb4, 0xff, 0x01, 0x01),
-- 
2.7.4

Re: [PATCH v2] Add support of all Foxconn (105b) Broadcom devices

[Marcel Holtmann]

Hi Dmitry,

> There is another device
> 
> T:  Bus=01 Lev=02 Prnt=02 Port=00 Cnt=01 Dev#=  3 Spd=12  MxCh= 0
> D:  Ver= 2.00 Cls=ff(vend.) Sub=01 Prot=01 MxPS=64 #Cfgs=  1
> P:  Vendor=105b ProdID=e066 Rev=01.12
> S:  Manufacturer=Broadcom Corp
> S:  Product=BCM20702A0
> S:  SerialNumber=342387DAE35E
> C:  #Ifs= 4 Cfg#= 1 Atr=e0 MxPwr=0mA
> I:  If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=01 Prot=01 Driver=(none)
> I:  If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=(none)
> I:  If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
> I:  If#= 3 Alt= 0 #EPs= 0 Cls=fe(app. ) Sub=01 Prot=01 Driver=(none)
> 
> Since we have Cls=ff, we can add all of them.
> 
> Signed-off-by: Dmitry Tunin <hanipouspilot@gmail.com>
> ---
> drivers/bluetooth/btusb.c | 3 ++-
> 1 file changed, 2 insertions(+), 1 deletion(-)

patch has been applied to bluetooth-next tree.

Regards

Marcel