[PATCH 0/6] ARM: dts: cygnus dts updates

[PATCH 0/6] ARM: dts: cygnus dts updates

[Scott Branden]

This patch series is a collection of patches for the Cygnus SoC dts files.

Jason Uy (1):
  ARM: dts: cygnus: Enable Performance Monitoring Unit

Jonathan Richardson (1):
  ARM: dts: cygnus: Add additional peripherals to dtsi

Raveendra Padasalagi (1):
  ARM: dts: cygnus: Add generic-ehci/ohci nodes

Ray Jui (1):
  ARM: dts: cygnus: Fix incorrect UART2 register base

Scott Branden (2):
  ARM: dts: cygnus: place v3d in proper address ordered location
  ARM: dts: cygnus: add serial0 alias for uart3 on bcm91130_entphn

 arch/arm/boot/dts/bcm-cygnus.dtsi      | 149 +++++++++++++++++++++++++++++----
 arch/arm/boot/dts/bcm911360_entphn.dts |   7 +-
 2 files changed, 140 insertions(+), 16 deletions(-)

-- 
2.5.0

[PATCH 0/6] ARM: dts: cygnus dts updates

[Scott Branden]

This patch series is a collection of patches for the Cygnus SoC dts files.

Jason Uy (1):
  ARM: dts: cygnus: Enable Performance Monitoring Unit

Jonathan Richardson (1):
  ARM: dts: cygnus: Add additional peripherals to dtsi

Raveendra Padasalagi (1):
  ARM: dts: cygnus: Add generic-ehci/ohci nodes

Ray Jui (1):
  ARM: dts: cygnus: Fix incorrect UART2 register base

Scott Branden (2):
  ARM: dts: cygnus: place v3d in proper address ordered location
  ARM: dts: cygnus: add serial0 alias for uart3 on bcm91130_entphn

 arch/arm/boot/dts/bcm-cygnus.dtsi      | 149 +++++++++++++++++++++++++++++----
 arch/arm/boot/dts/bcm911360_entphn.dts |   7 +-
 2 files changed, 140 insertions(+), 16 deletions(-)

-- 
2.5.0

[PATCH 1/6] ARM: dts: cygnus: Fix incorrect UART2 register base

[Scott Branden]

From: Ray Jui <ray.jui@broadcom.com>

Fix incorrect Cygnus UART2 register base.

Fixes: 0f0b21a83ad2 ("ARM: dts: Move all Cygnus peripherals into axi bus")
Signed-off-by: Ray Jui <ray.jui@broadcom.com>
Signed-off-by: Scott Branden <scott.branden@broadcom.com>
---
 arch/arm/boot/dts/bcm-cygnus.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/bcm-cygnus.dtsi b/arch/arm/boot/dts/bcm-cygnus.dtsi
index bf8c838..e4d07f4 100644
--- a/arch/arm/boot/dts/bcm-cygnus.dtsi
+++ b/arch/arm/boot/dts/bcm-cygnus.dtsi
@@ -324,7 +324,7 @@
 
 		uart2: serial@18022000 {
 			compatible = "snps,dw-apb-uart";
-			reg = <0x18020000 0x100>;
+			reg = <0x18022000 0x100>;
 			reg-shift = <2>;
 			reg-io-width = <4>;
 			interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
-- 
2.5.0

[PATCH 1/6] ARM: dts: cygnus: Fix incorrect UART2 register base

[Scott Branden]

From: Ray Jui <ray.jui@broadcom.com>

Fix incorrect Cygnus UART2 register base.

Fixes: 0f0b21a83ad2 ("ARM: dts: Move all Cygnus peripherals into axi bus")
Signed-off-by: Ray Jui <ray.jui@broadcom.com>
Signed-off-by: Scott Branden <scott.branden@broadcom.com>
---
 arch/arm/boot/dts/bcm-cygnus.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/bcm-cygnus.dtsi b/arch/arm/boot/dts/bcm-cygnus.dtsi
index bf8c838..e4d07f4 100644
--- a/arch/arm/boot/dts/bcm-cygnus.dtsi
+++ b/arch/arm/boot/dts/bcm-cygnus.dtsi
@@ -324,7 +324,7 @@
 
 		uart2: serial at 18022000 {
 			compatible = "snps,dw-apb-uart";
-			reg = <0x18020000 0x100>;
+			reg = <0x18022000 0x100>;
 			reg-shift = <2>;
 			reg-io-width = <4>;
 			interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
-- 
2.5.0

[PATCH 2/6] ARM: dts: cygnus: place v3d in proper address ordered location

[Scott Branden]

Move v3d devicetree node to proper address ordered location in Cygnus
dtsi.

Signed-off-by: Scott Branden <scott.branden@broadcom.com>
---
 arch/arm/boot/dts/bcm-cygnus.dtsi | 26 +++++++++++++-------------
 1 file changed, 13 insertions(+), 13 deletions(-)

diff --git a/arch/arm/boot/dts/bcm-cygnus.dtsi b/arch/arm/boot/dts/bcm-cygnus.dtsi
index e4d07f4..2077fee 100644
--- a/arch/arm/boot/dts/bcm-cygnus.dtsi
+++ b/arch/arm/boot/dts/bcm-cygnus.dtsi
@@ -366,6 +366,19 @@
 			brcm,nand-has-wp;
 		};
 
+		v3d: v3d@180a2000 {
+			compatible = "brcm,cygnus-v3d";
+			reg = <0x180a2000 0x1000>;
+			clocks = <&mipipll BCM_CYGNUS_MIPIPLL_CH2_V3D>;
+			clock-names = "v3d_clk";
+			interrupts = <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		vc4: gpu {
+			compatible = "brcm,cygnus-vc4";
+		};
+
 		gpio_asiu: gpio@180a5000 {
 			compatible = "brcm,cygnus-asiu-gpio";
 			reg = <0x180a5000 0x668>;
@@ -444,19 +457,6 @@
 			status = "disabled";
 		};
 
-		v3d: v3d@180a2000 {
-			compatible = "brcm,cygnus-v3d";
-			reg = <0x180a2000 0x1000>;
-			clocks = <&mipipll BCM_CYGNUS_MIPIPLL_CH2_V3D>;
-			clock-names = "v3d_clk";
-			interrupts = <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>;
-			status = "disabled";
-		};
-
-		vc4: gpu {
-			compatible = "brcm,cygnus-vc4";
-		};
-
 		adc: adc@180a6000 {
 			compatible = "brcm,iproc-static-adc";
 			#io-channel-cells = <1>;
-- 
2.5.0

[PATCH 2/6] ARM: dts: cygnus: place v3d in proper address ordered location

[Scott Branden]

Move v3d devicetree node to proper address ordered location in Cygnus
dtsi.

Signed-off-by: Scott Branden <scott.branden@broadcom.com>
---
 arch/arm/boot/dts/bcm-cygnus.dtsi | 26 +++++++++++++-------------
 1 file changed, 13 insertions(+), 13 deletions(-)

diff --git a/arch/arm/boot/dts/bcm-cygnus.dtsi b/arch/arm/boot/dts/bcm-cygnus.dtsi
index e4d07f4..2077fee 100644
--- a/arch/arm/boot/dts/bcm-cygnus.dtsi
+++ b/arch/arm/boot/dts/bcm-cygnus.dtsi
@@ -366,6 +366,19 @@
 			brcm,nand-has-wp;
 		};
 
+		v3d: v3d at 180a2000 {
+			compatible = "brcm,cygnus-v3d";
+			reg = <0x180a2000 0x1000>;
+			clocks = <&mipipll BCM_CYGNUS_MIPIPLL_CH2_V3D>;
+			clock-names = "v3d_clk";
+			interrupts = <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		vc4: gpu {
+			compatible = "brcm,cygnus-vc4";
+		};
+
 		gpio_asiu: gpio at 180a5000 {
 			compatible = "brcm,cygnus-asiu-gpio";
 			reg = <0x180a5000 0x668>;
@@ -444,19 +457,6 @@
 			status = "disabled";
 		};
 
-		v3d: v3d at 180a2000 {
-			compatible = "brcm,cygnus-v3d";
-			reg = <0x180a2000 0x1000>;
-			clocks = <&mipipll BCM_CYGNUS_MIPIPLL_CH2_V3D>;
-			clock-names = "v3d_clk";
-			interrupts = <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>;
-			status = "disabled";
-		};
-
-		vc4: gpu {
-			compatible = "brcm,cygnus-vc4";
-		};
-
 		adc: adc at 180a6000 {
 			compatible = "brcm,iproc-static-adc";
 			#io-channel-cells = <1>;
-- 
2.5.0

[PATCH 3/6] ARM: dts: cygnus: Enable Performance Monitoring Unit

[Scott Branden]

From: Jason Uy <jason.uy@broadcom.com>

Add PMU capability to Cygnus so trace and performance profiling
can be used.

Signed-off-by: Jason Uy <jason.uy@broadcom.com>
Signed-off-by: Scott Branden <scott.branden@broadcom.com>
---
 arch/arm/boot/dts/bcm-cygnus.dtsi | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/arch/arm/boot/dts/bcm-cygnus.dtsi b/arch/arm/boot/dts/bcm-cygnus.dtsi
index 2077fee..bc08987 100644
--- a/arch/arm/boot/dts/bcm-cygnus.dtsi
+++ b/arch/arm/boot/dts/bcm-cygnus.dtsi
@@ -55,6 +55,11 @@
 
 	/include/ "bcm-cygnus-clock.dtsi"
 
+	pmu {
+		compatible = "arm,cortex-a9-pmu";
+		interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
 	core {
 		compatible = "simple-bus";
 		ranges = <0x00000000 0x19000000 0x1000000>;
-- 
2.5.0

[PATCH 3/6] ARM: dts: cygnus: Enable Performance Monitoring Unit

[Scott Branden]

From: Jason Uy <jason.uy@broadcom.com>

Add PMU capability to Cygnus so trace and performance profiling
can be used.

Signed-off-by: Jason Uy <jason.uy@broadcom.com>
Signed-off-by: Scott Branden <scott.branden@broadcom.com>
---
 arch/arm/boot/dts/bcm-cygnus.dtsi | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/arch/arm/boot/dts/bcm-cygnus.dtsi b/arch/arm/boot/dts/bcm-cygnus.dtsi
index 2077fee..bc08987 100644
--- a/arch/arm/boot/dts/bcm-cygnus.dtsi
+++ b/arch/arm/boot/dts/bcm-cygnus.dtsi
@@ -55,6 +55,11 @@
 
 	/include/ "bcm-cygnus-clock.dtsi"
 
+	pmu {
+		compatible = "arm,cortex-a9-pmu";
+		interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
 	core {
 		compatible = "simple-bus";
 		ranges = <0x00000000 0x19000000 0x1000000>;
-- 
2.5.0

[PATCH 4/6] ARM: dts: cygnus: Add additional peripherals to dtsi

[Scott Branden]

From: Jonathan Richardson <jonathan.richardson@broadcom.com>

Add nodes for peripherals in Cygnus dtsi: sdhci, keypad, spi, dma,
pinmux configs.

Signed-off-by: Jonathan Richardson <jonathan.richardson@broadcom.com>
Signed-off-by: Scott Branden <scott.branden@broadcom.com>
---
 arch/arm/boot/dts/bcm-cygnus.dtsi | 102 ++++++++++++++++++++++++++++++++++++++
 1 file changed, 102 insertions(+)

diff --git a/arch/arm/boot/dts/bcm-cygnus.dtsi b/arch/arm/boot/dts/bcm-cygnus.dtsi
index bc08987..306b04c 100644
--- a/arch/arm/boot/dts/bcm-cygnus.dtsi
+++ b/arch/arm/boot/dts/bcm-cygnus.dtsi
@@ -124,6 +124,21 @@
 			compatible = "brcm,cygnus-pinmux";
 			reg = <0x0301d0c8 0x30>,
 			      <0x0301d24c 0x2c>;
+
+			spi_0: spi_0 {
+				function = "spi0";
+				groups = "spi0_grp";
+			};
+
+			spi_1: spi_1 {
+				function = "spi1";
+				groups = "spi1_grp";
+			};
+
+			spi_2: spi_2 {
+				function = "spi2";
+				groups = "spi2_grp";
+			};
 		};
 
 		mailbox: mailbox@03024024 {
@@ -305,6 +320,23 @@
 			};
 		};
 
+		dma0: dma@18018000 {
+			compatible = "arm,pl330", "arm,primecell";
+			reg = <0x18018000 0x1000>;
+			interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&apb_clk>;
+			clock-names = "apb_pclk";
+			#dma-cells = <1>;
+		};
+
 		uart0: serial@18020000 {
 			compatible = "snps,dw-apb-uart";
 			reg = <0x18020000 0x100>;
@@ -349,6 +381,52 @@
 			status = "disabled";
 		};
 
+		spi0: spi@18028000 {
+			compatible = "arm,pl022", "arm,primecell";
+			reg = <0x18028000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-0 = <&spi_0>;
+			clocks = <&axi81_clk>;
+			clock-names = "apb_pclk";
+			status = "disabled";
+		};
+
+		spi1: spi@18029000 {
+			compatible = "arm,pl022", "arm,primecell";
+			reg = <0x18029000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-0 = <&spi_1>;
+			clocks = <&axi81_clk>;
+			clock-names = "apb_pclk";
+			status = "disabled";
+		};
+
+		spi2: spi@1802a000 {
+			compatible = "arm,pl022", "arm,primecell";
+			reg = <0x1802a000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-0 = <&spi_2>;
+			clocks = <&axi81_clk>;
+			clock-names = "apb_pclk";
+			status = "disabled";
+		};
+
+		sdhci0: sdhci@18041000 {
+			compatible = "brcm,sdhci-iproc-cygnus";
+			reg = <0x18041000 0x100>;
+			interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&lcpll0 BCM_CYGNUS_LCPLL0_SDIO_CLK>;
+			bus-width = <4>;
+			sdhci,auto-cmd12;
+			status = "disabled";
+		};
+
 		eth0: ethernet@18042000 {
 			compatible = "brcm,amac";
 			reg = <0x18042000 0x1000>,
@@ -358,6 +436,16 @@
 			status = "disabled";
 		};
 
+		sdhci1: sdhci@18043000 {
+			compatible = "brcm,sdhci-iproc-cygnus";
+			reg = <0x18043000 0x100>;
+			interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&lcpll0 BCM_CYGNUS_LCPLL0_SDIO_CLK>;
+			bus-width = <4>;
+			sdhci,auto-cmd12;
+			status = "disabled";
+		};
+
 		nand: nand@18046000 {
 			compatible = "brcm,nand-iproc", "brcm,brcmnand-v6.1";
 			reg = <0x18046000 0x600>, <0xf8105408 0x600>,
@@ -472,5 +560,19 @@
 			interrupts = <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>;
 			status = "disabled";
 		};
+
+		keypad: keypad@180ac000 {
+			compatible = "brcm,bcm-keypad";
+			reg = <0x180ac000 0x14c>;
+			interrupts = <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&asiu_clks BCM_CYGNUS_ASIU_KEYPAD_CLK>;
+			clock-names = "peri_clk";
+			clock-frequency = <31250>;
+			pull-up-enabled;
+			col-debounce-filter-period = <0>;
+			status-debounce-filter-period = <0>;
+			row-output-enabled;
+			status = "disabled";
+		};
 	};
 };
-- 
2.5.0

[PATCH 4/6] ARM: dts: cygnus: Add additional peripherals to dtsi

[Scott Branden]

From: Jonathan Richardson <jonathan.richardson@broadcom.com>

Add nodes for peripherals in Cygnus dtsi: sdhci, keypad, spi, dma,
pinmux configs.

Signed-off-by: Jonathan Richardson <jonathan.richardson@broadcom.com>
Signed-off-by: Scott Branden <scott.branden@broadcom.com>
---
 arch/arm/boot/dts/bcm-cygnus.dtsi | 102 ++++++++++++++++++++++++++++++++++++++
 1 file changed, 102 insertions(+)

diff --git a/arch/arm/boot/dts/bcm-cygnus.dtsi b/arch/arm/boot/dts/bcm-cygnus.dtsi
index bc08987..306b04c 100644
--- a/arch/arm/boot/dts/bcm-cygnus.dtsi
+++ b/arch/arm/boot/dts/bcm-cygnus.dtsi
@@ -124,6 +124,21 @@
 			compatible = "brcm,cygnus-pinmux";
 			reg = <0x0301d0c8 0x30>,
 			      <0x0301d24c 0x2c>;
+
+			spi_0: spi_0 {
+				function = "spi0";
+				groups = "spi0_grp";
+			};
+
+			spi_1: spi_1 {
+				function = "spi1";
+				groups = "spi1_grp";
+			};
+
+			spi_2: spi_2 {
+				function = "spi2";
+				groups = "spi2_grp";
+			};
 		};
 
 		mailbox: mailbox at 03024024 {
@@ -305,6 +320,23 @@
 			};
 		};
 
+		dma0: dma at 18018000 {
+			compatible = "arm,pl330", "arm,primecell";
+			reg = <0x18018000 0x1000>;
+			interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&apb_clk>;
+			clock-names = "apb_pclk";
+			#dma-cells = <1>;
+		};
+
 		uart0: serial at 18020000 {
 			compatible = "snps,dw-apb-uart";
 			reg = <0x18020000 0x100>;
@@ -349,6 +381,52 @@
 			status = "disabled";
 		};
 
+		spi0: spi at 18028000 {
+			compatible = "arm,pl022", "arm,primecell";
+			reg = <0x18028000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-0 = <&spi_0>;
+			clocks = <&axi81_clk>;
+			clock-names = "apb_pclk";
+			status = "disabled";
+		};
+
+		spi1: spi at 18029000 {
+			compatible = "arm,pl022", "arm,primecell";
+			reg = <0x18029000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-0 = <&spi_1>;
+			clocks = <&axi81_clk>;
+			clock-names = "apb_pclk";
+			status = "disabled";
+		};
+
+		spi2: spi at 1802a000 {
+			compatible = "arm,pl022", "arm,primecell";
+			reg = <0x1802a000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-0 = <&spi_2>;
+			clocks = <&axi81_clk>;
+			clock-names = "apb_pclk";
+			status = "disabled";
+		};
+
+		sdhci0: sdhci at 18041000 {
+			compatible = "brcm,sdhci-iproc-cygnus";
+			reg = <0x18041000 0x100>;
+			interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&lcpll0 BCM_CYGNUS_LCPLL0_SDIO_CLK>;
+			bus-width = <4>;
+			sdhci,auto-cmd12;
+			status = "disabled";
+		};
+
 		eth0: ethernet at 18042000 {
 			compatible = "brcm,amac";
 			reg = <0x18042000 0x1000>,
@@ -358,6 +436,16 @@
 			status = "disabled";
 		};
 
+		sdhci1: sdhci at 18043000 {
+			compatible = "brcm,sdhci-iproc-cygnus";
+			reg = <0x18043000 0x100>;
+			interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&lcpll0 BCM_CYGNUS_LCPLL0_SDIO_CLK>;
+			bus-width = <4>;
+			sdhci,auto-cmd12;
+			status = "disabled";
+		};
+
 		nand: nand at 18046000 {
 			compatible = "brcm,nand-iproc", "brcm,brcmnand-v6.1";
 			reg = <0x18046000 0x600>, <0xf8105408 0x600>,
@@ -472,5 +560,19 @@
 			interrupts = <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>;
 			status = "disabled";
 		};
+
+		keypad: keypad at 180ac000 {
+			compatible = "brcm,bcm-keypad";
+			reg = <0x180ac000 0x14c>;
+			interrupts = <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&asiu_clks BCM_CYGNUS_ASIU_KEYPAD_CLK>;
+			clock-names = "peri_clk";
+			clock-frequency = <31250>;
+			pull-up-enabled;
+			col-debounce-filter-period = <0>;
+			status-debounce-filter-period = <0>;
+			row-output-enabled;
+			status = "disabled";
+		};
 	};
 };
-- 
2.5.0

[PATCH 5/6] ARM: dts: cygnus: add serial0 alias for uart3 on bcm91130_entphn

[Scott Branden]

Use serial0 alias to select stdout-path on Cygnus bcm911360_entphon
board.

Signed-off-by: Scott Branden <scott.branden@broadcom.com>
---
 arch/arm/boot/dts/bcm911360_entphn.dts | 7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/bcm911360_entphn.dts b/arch/arm/boot/dts/bcm911360_entphn.dts
index 000f5f1..53f990d 100644
--- a/arch/arm/boot/dts/bcm911360_entphn.dts
+++ b/arch/arm/boot/dts/bcm911360_entphn.dts
@@ -39,9 +39,12 @@
 	model = "Cygnus Enterprise Phone (BCM911360_ENTPHN)";
 	compatible = "brcm,bcm11360", "brcm,cygnus";
 
+	aliases {
+		serial0 = &uart3;
+	};
+
 	chosen {
-		stdout-path = &uart3;
-		bootargs = "console=ttyS0,115200";
+		stdout-path = "serial0:115200n8";
 	};
 
 	gpio_keys {
-- 
2.5.0

[PATCH 5/6] ARM: dts: cygnus: add serial0 alias for uart3 on bcm91130_entphn

[Scott Branden]

Use serial0 alias to select stdout-path on Cygnus bcm911360_entphon
board.

Signed-off-by: Scott Branden <scott.branden@broadcom.com>
---
 arch/arm/boot/dts/bcm911360_entphn.dts | 7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/bcm911360_entphn.dts b/arch/arm/boot/dts/bcm911360_entphn.dts
index 000f5f1..53f990d 100644
--- a/arch/arm/boot/dts/bcm911360_entphn.dts
+++ b/arch/arm/boot/dts/bcm911360_entphn.dts
@@ -39,9 +39,12 @@
 	model = "Cygnus Enterprise Phone (BCM911360_ENTPHN)";
 	compatible = "brcm,bcm11360", "brcm,cygnus";
 
+	aliases {
+		serial0 = &uart3;
+	};
+
 	chosen {
-		stdout-path = &uart3;
-		bootargs = "console=ttyS0,115200";
+		stdout-path = "serial0:115200n8";
 	};
 
 	gpio_keys {
-- 
2.5.0

[PATCH 6/6] ARM: dts: cygnus: Add generic-ehci/ohci nodes

[Scott Branden]

From: Raveendra Padasalagi <raveendra.padasalagi@broadcom.com>

Add dt nodes for generic-ehci/ohci host controller.

Signed-off-by: Raveendra Padasalagi <raveendra.padasalagi@broadcom.com>
Signed-off-by: Scott Branden <scott.branden@broadcom.com>
---
 arch/arm/boot/dts/bcm-cygnus.dtsi | 14 ++++++++++++++
 1 file changed, 14 insertions(+)

diff --git a/arch/arm/boot/dts/bcm-cygnus.dtsi b/arch/arm/boot/dts/bcm-cygnus.dtsi
index 306b04c..7c957ea 100644
--- a/arch/arm/boot/dts/bcm-cygnus.dtsi
+++ b/arch/arm/boot/dts/bcm-cygnus.dtsi
@@ -459,6 +459,20 @@
 			brcm,nand-has-wp;
 		};
 
+		ehci0: usb@18048000 {
+			compatible = "generic-ehci";
+			reg = <0x18048000 0x100>;
+			interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		ohci0: usb@18048800 {
+			compatible = "generic-ohci";
+			reg = <0x18048800 0x100>;
+			interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
 		v3d: v3d@180a2000 {
 			compatible = "brcm,cygnus-v3d";
 			reg = <0x180a2000 0x1000>;
-- 
2.5.0

[PATCH 6/6] ARM: dts: cygnus: Add generic-ehci/ohci nodes

[Scott Branden]

From: Raveendra Padasalagi <raveendra.padasalagi@broadcom.com>

Add dt nodes for generic-ehci/ohci host controller.

Signed-off-by: Raveendra Padasalagi <raveendra.padasalagi@broadcom.com>
Signed-off-by: Scott Branden <scott.branden@broadcom.com>
---
 arch/arm/boot/dts/bcm-cygnus.dtsi | 14 ++++++++++++++
 1 file changed, 14 insertions(+)

diff --git a/arch/arm/boot/dts/bcm-cygnus.dtsi b/arch/arm/boot/dts/bcm-cygnus.dtsi
index 306b04c..7c957ea 100644
--- a/arch/arm/boot/dts/bcm-cygnus.dtsi
+++ b/arch/arm/boot/dts/bcm-cygnus.dtsi
@@ -459,6 +459,20 @@
 			brcm,nand-has-wp;
 		};
 
+		ehci0: usb at 18048000 {
+			compatible = "generic-ehci";
+			reg = <0x18048000 0x100>;
+			interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		ohci0: usb at 18048800 {
+			compatible = "generic-ohci";
+			reg = <0x18048800 0x100>;
+			interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
 		v3d: v3d at 180a2000 {
 			compatible = "brcm,cygnus-v3d";
 			reg = <0x180a2000 0x1000>;
-- 
2.5.0

Re: [PATCH 2/6] ARM: dts: cygnus: place v3d in proper address ordered location

[Eric Anholt]

[-- Attachment #1: Type: text/plain, Size: 238 bytes --]

Scott Branden <scott.branden@broadcom.com> writes:

> Move v3d devicetree node to proper address ordered location in Cygnus
> dtsi.
>
> Signed-off-by: Scott Branden <scott.branden@broadcom.com>

Reviewed-by: Eric Anholt <eric@anholt.net>

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 832 bytes --]

Re: [PATCH 2/6] ARM: dts: cygnus: place v3d in proper address ordered location

[Eric Anholt]

[-- Attachment #1: Type: text/plain, Size: 321 bytes --]

Scott Branden <scott.branden-dY08KVG/lbpWk0Htik3J/w@public.gmane.org> writes:

> Move v3d devicetree node to proper address ordered location in Cygnus
> dtsi.
>
> Signed-off-by: Scott Branden <scott.branden-dY08KVG/lbpWk0Htik3J/w@public.gmane.org>

Reviewed-by: Eric Anholt <eric-WhKQ6XTQaPysTnJN9+BGXg@public.gmane.org>

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 832 bytes --]

[PATCH 2/6] ARM: dts: cygnus: place v3d in proper address ordered location

[Eric Anholt]

Scott Branden <scott.branden@broadcom.com> writes:

> Move v3d devicetree node to proper address ordered location in Cygnus
> dtsi.
>
> Signed-off-by: Scott Branden <scott.branden@broadcom.com>

Reviewed-by: Eric Anholt <eric@anholt.net>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 832 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20170815/3d1bf438/attachment.sig>

Re: [PATCH 1/6] ARM: dts: cygnus: Fix incorrect UART2 register base

[Eric Anholt]

[-- Attachment #1: Type: text/plain, Size: 368 bytes --]

Scott Branden <scott.branden@broadcom.com> writes:

> From: Ray Jui <ray.jui@broadcom.com>
>
> Fix incorrect Cygnus UART2 register base.
>
> Fixes: 0f0b21a83ad2 ("ARM: dts: Move all Cygnus peripherals into axi bus")
> Signed-off-by: Ray Jui <ray.jui@broadcom.com>
> Signed-off-by: Scott Branden <scott.branden@broadcom.com>

Reviewed-by: Eric Anholt <eric@anholt.net>

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 832 bytes --]

Re: [PATCH 1/6] ARM: dts: cygnus: Fix incorrect UART2 register base

[Eric Anholt]

[-- Attachment #1: Type: text/plain, Size: 505 bytes --]

Scott Branden <scott.branden-dY08KVG/lbpWk0Htik3J/w@public.gmane.org> writes:

> From: Ray Jui <ray.jui-dY08KVG/lbpWk0Htik3J/w@public.gmane.org>
>
> Fix incorrect Cygnus UART2 register base.
>
> Fixes: 0f0b21a83ad2 ("ARM: dts: Move all Cygnus peripherals into axi bus")
> Signed-off-by: Ray Jui <ray.jui-dY08KVG/lbpWk0Htik3J/w@public.gmane.org>
> Signed-off-by: Scott Branden <scott.branden-dY08KVG/lbpWk0Htik3J/w@public.gmane.org>

Reviewed-by: Eric Anholt <eric-WhKQ6XTQaPysTnJN9+BGXg@public.gmane.org>

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 832 bytes --]

[PATCH 1/6] ARM: dts: cygnus: Fix incorrect UART2 register base

[Eric Anholt]

Scott Branden <scott.branden@broadcom.com> writes:

> From: Ray Jui <ray.jui@broadcom.com>
>
> Fix incorrect Cygnus UART2 register base.
>
> Fixes: 0f0b21a83ad2 ("ARM: dts: Move all Cygnus peripherals into axi bus")
> Signed-off-by: Ray Jui <ray.jui@broadcom.com>
> Signed-off-by: Scott Branden <scott.branden@broadcom.com>

Reviewed-by: Eric Anholt <eric@anholt.net>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 832 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20170815/1b2aba19/attachment.sig>

Re: [PATCH 0/6] ARM: dts: cygnus dts updates

[Florian Fainelli]

On 08/15/2017 10:25 AM, Scott Branden wrote:
> This patch series is a collection of patches for the Cygnus SoC dts files.
> 
> Jason Uy (1):
>   ARM: dts: cygnus: Enable Performance Monitoring Unit
> 
> Jonathan Richardson (1):
>   ARM: dts: cygnus: Add additional peripherals to dtsi
> 
> Raveendra Padasalagi (1):
>   ARM: dts: cygnus: Add generic-ehci/ohci nodes
> 
> Ray Jui (1):
>   ARM: dts: cygnus: Fix incorrect UART2 register base
> 
> Scott Branden (2):
>   ARM: dts: cygnus: place v3d in proper address ordered location
>   ARM: dts: cygnus: add serial0 alias for uart3 on bcm91130_entphn

Series applied, thanks!
-- 
Florian

[PATCH 0/6] ARM: dts: cygnus dts updates

[Florian Fainelli]

On 08/15/2017 10:25 AM, Scott Branden wrote:
> This patch series is a collection of patches for the Cygnus SoC dts files.
> 
> Jason Uy (1):
>   ARM: dts: cygnus: Enable Performance Monitoring Unit
> 
> Jonathan Richardson (1):
>   ARM: dts: cygnus: Add additional peripherals to dtsi
> 
> Raveendra Padasalagi (1):
>   ARM: dts: cygnus: Add generic-ehci/ohci nodes
> 
> Ray Jui (1):
>   ARM: dts: cygnus: Fix incorrect UART2 register base
> 
> Scott Branden (2):
>   ARM: dts: cygnus: place v3d in proper address ordered location
>   ARM: dts: cygnus: add serial0 alias for uart3 on bcm91130_entphn

Series applied, thanks!
-- 
Florian