* [U-Boot] [PATCH 1/3] rockchip: rk3399-evb: add script for atf fit
@ 2017-08-18 5:07 Kever Yang
2017-08-18 5:07 ` [U-Boot] [PATCH 2/3] rockchip: firefly-rk3399: add FIT for rk3399 Kever Yang
` (3 more replies)
0 siblings, 4 replies; 8+ messages in thread
From: Kever Yang @ 2017-08-18 5:07 UTC (permalink / raw)
To: u-boot
Add a script to generate binaries from bl31.elf, and generate
u-boot.its file for FIT image including u-boot, dtb and atf binaries.
Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
---
board/rockchip/evb_rk3399/mk_fit_atf.sh | 110 ++++++++++++++++++++++++++++++++
1 file changed, 110 insertions(+)
create mode 100755 board/rockchip/evb_rk3399/mk_fit_atf.sh
diff --git a/board/rockchip/evb_rk3399/mk_fit_atf.sh b/board/rockchip/evb_rk3399/mk_fit_atf.sh
new file mode 100755
index 0000000..146550a
--- /dev/null
+++ b/board/rockchip/evb_rk3399/mk_fit_atf.sh
@@ -0,0 +1,110 @@
+#!/bin/sh
+#
+# script to generate FIT image source for rk3399 boards with
+# ARM Trusted Firmware and multiple device trees (given on the command line)
+#
+# usage: $0 <dt_name> [<dt_name> [<dt_name] ...]
+
+[ -z "$BL31" ] && BL31="bl31.elf"
+
+if [ ! -f $BL31 ]; then
+ echo "WARNING: BL31 file $BL31 NOT found, resulting binary is non-functional" >&2
+ BL31=/dev/null
+fi
+
+#tools/mkimage -n rk3399 -T rksd -d spl/u-boot-spl.bin idbspl.img
+
+cat << __HEADER_EOF
+/dts-v1/;
+
+/ {
+ description = "Configuration to load ATF before U-Boot";
+ #address-cells = <1>;
+
+ images {
+ uboot at 1 {
+ description = "U-Boot (64-bit)";
+ data = /incbin/("u-boot-nodtb.bin");
+ type = "standalone";
+ arch = "arm64";
+ compression = "none";
+ load = <0x00200000>;
+ };
+__HEADER_EOF
+
+atf_cnt=1
+
+for l in `readelf -l $BL31 | grep -A1 LOAD | gawk --non-decimal-data \
+ '{if (NR % 2) {printf "%d:0x%x:", $2,$4} else {printf "%d\n", $1}}'`
+do
+ offset=${l%%:*}
+ ll=${l#*:}
+ phy_offset=${ll%:*}
+ filesz=${ll##*:}
+
+ #echo "$offset/$phy_offset/$filesz"
+
+ of=rk3399bl31_${phy_offset}.bin
+ dd if=$BL31 of=$of bs=1 skip=$offset count=$filesz
+
+ out_string="${out_string}:${phy_offset}"
+
+ cat << __ATF1_EOF
+ atf@$atf_cnt {
+ description = "ARM Trusted Firmware";
+ data = /incbin/("$of");
+ type = "firmware";
+ arch = "arm64";
+ compression = "none";
+ load = <$phy_offset>;
+__ATF1_EOF
+ if [ "$atf_cnt" -eq 1 ]; then
+ cat << __ATF2_EOF
+ entry = <$phy_offset>;
+__ATF2_EOF
+ fi
+ cat << __ATF3_EOF
+ };
+__ATF3_EOF
+ atf_cnt=$((atf_cnt + 1))
+done
+
+cnt=1
+for dtname in $*
+do
+ cat << __FDT_IMAGE_EOF
+ fdt@$cnt {
+ description = "$(basename $dtname .dtb)";
+ data = /incbin/("$dtname");
+ type = "flat_dt";
+ compression = "none";
+ };
+__FDT_IMAGE_EOF
+ cnt=$((cnt+1))
+done
+
+cat << __CONF_HEADER_EOF
+ };
+ configurations {
+ default = "config at 1";
+
+__CONF_HEADER_EOF
+
+cnt=1
+for dtname in $*
+do
+ cat << __CONF_SECTION_EOF
+ config@$cnt {
+ description = "$(basename $dtname .dtb)";
+ firmware = "uboot at 1";
+ loadables = "atf at 1","atf at 2","atf at 3";
+ fdt = "fdt@1";
+ };
+__CONF_SECTION_EOF
+ cnt=$((cnt+1))
+done
+
+cat << __ITS_EOF
+ };
+};
+__ITS_EOF
--
1.9.1
^ permalink raw reply related [flat|nested] 8+ messages in thread
* [U-Boot] [PATCH 2/3] rockchip: firefly-rk3399: add FIT for rk3399
2017-08-18 5:07 [U-Boot] [PATCH 1/3] rockchip: rk3399-evb: add script for atf fit Kever Yang
@ 2017-08-18 5:07 ` Kever Yang
2017-08-19 11:55 ` Mark Kettenis
2017-08-18 5:07 ` [U-Boot] [PATCH 3/3] rockchip: evb-rk3399: update document for board bring up Kever Yang
` (2 subsequent siblings)
3 siblings, 1 reply; 8+ messages in thread
From: Kever Yang @ 2017-08-18 5:07 UTC (permalink / raw)
To: u-boot
Enable SPL_FIT_GENERATOR with path for it.
With this patch you can get u-boot.itb for rk3399-evb with:
> make u-boot.itb
Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
---
configs/firefly-rk3399_defconfig | 1 +
1 file changed, 1 insertion(+)
diff --git a/configs/firefly-rk3399_defconfig b/configs/firefly-rk3399_defconfig
index 67e14c1..2572933 100644
--- a/configs/firefly-rk3399_defconfig
+++ b/configs/firefly-rk3399_defconfig
@@ -9,6 +9,7 @@ CONFIG_DEFAULT_DEVICE_TREE="rk3399-firefly"
CONFIG_DEBUG_UART=y
CONFIG_FIT=y
CONFIG_SPL_LOAD_FIT=y
+CONFIG_SPL_FIT_GENERATOR="board/rockchip/evb_rk3399/mk_fit_atf.sh"
CONFIG_ENV_IS_IN_MMC=y
# CONFIG_DISPLAY_CPUINFO is not set
CONFIG_SPL_STACK_R=y
--
1.9.1
^ permalink raw reply related [flat|nested] 8+ messages in thread
* [U-Boot] [PATCH 3/3] rockchip: evb-rk3399: update document for board bring up
2017-08-18 5:07 [U-Boot] [PATCH 1/3] rockchip: rk3399-evb: add script for atf fit Kever Yang
2017-08-18 5:07 ` [U-Boot] [PATCH 2/3] rockchip: firefly-rk3399: add FIT for rk3399 Kever Yang
@ 2017-08-18 5:07 ` Kever Yang
2017-08-19 11:58 ` Mark Kettenis
2017-08-21 12:01 ` [U-Boot] [U-Boot, " Philipp Tomsich
2017-08-19 11:53 ` [U-Boot] [PATCH 1/3] rockchip: rk3399-evb: add script for atf fit Mark Kettenis
2017-08-26 23:13 ` Simon Glass
3 siblings, 2 replies; 8+ messages in thread
From: Kever Yang @ 2017-08-18 5:07 UTC (permalink / raw)
To: u-boot
Since we support ATF in SPL and add script for it, let's make the
document up to date.
Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
---
board/rockchip/evb_rk3399/README | 79 ++++++++++++++++++++++++++++++++--------
1 file changed, 63 insertions(+), 16 deletions(-)
diff --git a/board/rockchip/evb_rk3399/README b/board/rockchip/evb_rk3399/README
index fb8bb19..9982848 100644
--- a/board/rockchip/evb_rk3399/README
+++ b/board/rockchip/evb_rk3399/README
@@ -18,8 +18,8 @@ evb key features:
* PMIC: rk808
* debug console: UART2
-In order to support Arm Trust Firmware(ATF), we need to use the
-miniloader from rockchip which:
+In order to support Arm Trust Firmware(ATF), we can use either SPL or
+miniloader from rockchip to do:
* do DRAM init
* load and verify ATF image
* load and verify U-Boot image
@@ -32,8 +32,8 @@ Get the Source and prebuild binary
> mkdir ~/evb_rk3399
> cd ~/evb_rk3399
> git clone https://github.com/ARM-software/arm-trusted-firmware.git
- > git clone https://github.com/rockchip-linux/rkbin
- > git clone https://github.com/rockchip-linux/rkflashtool
+ > git clone https://github.com/rockchip-linux/rkbin.git
+ > git clone https://github.com/rockchip-linux/rkdeveloptool.git
Compile the ATF
===============
@@ -42,32 +42,79 @@ Compile the ATF
> make realclean
> make CROSS_COMPILE=aarch64-linux-gnu- PLAT=rk3399 bl31
+ Or you can get the bl31.elf directly from Rockchip:
+ cp rkbin/rk33/rk3399_bl31_v1.00.elf ../u-boot/bl31.elf
+
+ Get bl31.elf in this step, copy it to U-Boot root dir:
+ > cp bl31.elf ../u-boot/
+
Compile the U-Boot
==================
> cd ../u-boot
- > make CROSS_COMPILE=aarch64-linux-gnu- evb-rk3399_defconfig all
+ > export ARCH=arm64
+ > export CROSS_COMPILE=aarch64-linux-gnu-
+ > make evb-rk3399_defconfig
+ for firefly-rk3399, use below instead:
+ > make evb-firefly_defconfig
+ > make
+ > make u-boot.itb
-Compile the rkflashtool
-=======================
+ Get spl/u-boot-spl.bin and u-boot.itb in this step.
+Compile the rkdeveloptool
+=======================
+ Follow instructions in latest README
> cd ../rkflashtool
+ > autoreconf -i
+ > ./configure
> make
+ > sudo make install
+
+ Get rkdeveloptool in you Host in this step.
+
+Both origin binaries and Tool are ready now, choose either option 1 or
+option 2 to deploy U-Boot.
+
+Package the image
+=================
-Package the image for miniloader
-================================
+Package the image for U-Boot SPL(option 1)
+--------------------------------
> cd ..
- > cp arm-trusted-firmware/build/rk3399/release/bl31.bin rkbin/rk33
+ > tools/mkimage -n rk3399 -T rksd -d spl/u-boot-spl.bin idbspl.img
+
+ Get idbspl.img in this step.
+
+Package the image for Rockchip miniloader(option 2)
+------------------------------------------
+ > cd ..
+ > cp arm-trusted-firmware/build/rk3399/release/bl31.elf rkbin/rk33
> ./rkbin/tools/trust_merger rkbin/tools/RK3399TRUST.ini
> ./rkbin/tools/loaderimage --pack --uboot u-boot/u-boot-dtb.bin uboot.img
- > mkdir image
- > mv trust.img ./image/
- > mv uboot.img ./image/rk3399evb-uboot.bin
-Flash the image
-===============
+ Get trust.img and uboot.img in this step.
+
+Flash the image to eMMC
+=======================
+
+Flash the image with U-Boot SPL(option 1)
+-------------------------------
Power on(or reset with RESET KEY) with MASKROM KEY preesed, and then:
+ > rkdeveloptool db rkbin/rk33/rk3399_loader_v1.08.106.bin
+ > rkdeveloptool wl 64 u-boot/idbspl.img
+ > rkdeveloptool wl 512 u-boot/u-boot.itb
+ > rkdeveloptool rd
- > ./rkflashtool/rkflashloader rk3399evb
+Flash the image with Rockchip miniloader(option 2)
+----------------------------------------
+Power on(or reset with RESET KEY) with MASKROM KEY preesed, and then:
+ > rkdeveloptool db rkbin/rk33/rk3399_loader_v1.08.106.bin
+ > rkdeveloptool ul rkbin/rk33/rk3399_loader_v1.08.106.bin
+ > rkdeveloptool wl 0x4000 u-boot/uboot.img
+ > rkdeveloptool wl 0x6000 u-boot/trust.img
+ > rkdeveloptool rd
You should be able to get U-Boot log message in console/UART2 now.
+For more detail, please reference to:
+http://opensource.rock-chips.com/wiki_Boot_option
--
1.9.1
^ permalink raw reply related [flat|nested] 8+ messages in thread
* [U-Boot] [PATCH 1/3] rockchip: rk3399-evb: add script for atf fit
2017-08-18 5:07 [U-Boot] [PATCH 1/3] rockchip: rk3399-evb: add script for atf fit Kever Yang
2017-08-18 5:07 ` [U-Boot] [PATCH 2/3] rockchip: firefly-rk3399: add FIT for rk3399 Kever Yang
2017-08-18 5:07 ` [U-Boot] [PATCH 3/3] rockchip: evb-rk3399: update document for board bring up Kever Yang
@ 2017-08-19 11:53 ` Mark Kettenis
2017-08-26 23:13 ` Simon Glass
3 siblings, 0 replies; 8+ messages in thread
From: Mark Kettenis @ 2017-08-19 11:53 UTC (permalink / raw)
To: u-boot
> From: Kever Yang <kever.yang@rock-chips.com>
> Date: Fri, 18 Aug 2017 13:07:04 +0800
>
> Add a script to generate binaries from bl31.elf, and generate
> u-boot.its file for FIT image including u-boot, dtb and atf binaries.
>
> Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
This doesn't work if the ATF BL31_BASE is 0x1000 instead of 0x10000,
but there are other reasons why 0x1000 doesn't work. Tested this with
ATF v1.4 with BL31_BASE moved back to 0x10000, and that works fine.
So this is defenitely progress! This allows me to build my own
firmware for the Firefly-RK3399 with a sane console speed of 115200.
Reviewed-by: Mark Kettenis <kettenis@openbsd.org>
Tested-by: Mark Kettenis <kettenis@openbsd.org>
> ---
>
> board/rockchip/evb_rk3399/mk_fit_atf.sh | 110 ++++++++++++++++++++++++++++++++
> 1 file changed, 110 insertions(+)
> create mode 100755 board/rockchip/evb_rk3399/mk_fit_atf.sh
>
> diff --git a/board/rockchip/evb_rk3399/mk_fit_atf.sh b/board/rockchip/evb_rk3399/mk_fit_atf.sh
> new file mode 100755
> index 0000000..146550a
> --- /dev/null
> +++ b/board/rockchip/evb_rk3399/mk_fit_atf.sh
> @@ -0,0 +1,110 @@
> +#!/bin/sh
> +#
> +# script to generate FIT image source for rk3399 boards with
> +# ARM Trusted Firmware and multiple device trees (given on the command line)
> +#
> +# usage: $0 <dt_name> [<dt_name> [<dt_name] ...]
> +
> +[ -z "$BL31" ] && BL31="bl31.elf"
> +
> +if [ ! -f $BL31 ]; then
> + echo "WARNING: BL31 file $BL31 NOT found, resulting binary is non-functional" >&2
> + BL31=/dev/null
> +fi
> +
> +#tools/mkimage -n rk3399 -T rksd -d spl/u-boot-spl.bin idbspl.img
> +
> +cat << __HEADER_EOF
> +/dts-v1/;
> +
> +/ {
> + description = "Configuration to load ATF before U-Boot";
> + #address-cells = <1>;
> +
> + images {
> + uboot at 1 {
> + description = "U-Boot (64-bit)";
> + data = /incbin/("u-boot-nodtb.bin");
> + type = "standalone";
> + arch = "arm64";
> + compression = "none";
> + load = <0x00200000>;
> + };
> +__HEADER_EOF
> +
> +atf_cnt=1
> +
> +for l in `readelf -l $BL31 | grep -A1 LOAD | gawk --non-decimal-data \
> + '{if (NR % 2) {printf "%d:0x%x:", $2,$4} else {printf "%d\n", $1}}'`
> +do
> + offset=${l%%:*}
> + ll=${l#*:}
> + phy_offset=${ll%:*}
> + filesz=${ll##*:}
> +
> + #echo "$offset/$phy_offset/$filesz"
> +
> + of=rk3399bl31_${phy_offset}.bin
> + dd if=$BL31 of=$of bs=1 skip=$offset count=$filesz
> +
> + out_string="${out_string}:${phy_offset}"
> +
> + cat << __ATF1_EOF
> + atf@$atf_cnt {
> + description = "ARM Trusted Firmware";
> + data = /incbin/("$of");
> + type = "firmware";
> + arch = "arm64";
> + compression = "none";
> + load = <$phy_offset>;
> +__ATF1_EOF
> + if [ "$atf_cnt" -eq 1 ]; then
> + cat << __ATF2_EOF
> + entry = <$phy_offset>;
> +__ATF2_EOF
> + fi
> + cat << __ATF3_EOF
> + };
> +__ATF3_EOF
> + atf_cnt=$((atf_cnt + 1))
> +done
> +
> +cnt=1
> +for dtname in $*
> +do
> + cat << __FDT_IMAGE_EOF
> + fdt@$cnt {
> + description = "$(basename $dtname .dtb)";
> + data = /incbin/("$dtname");
> + type = "flat_dt";
> + compression = "none";
> + };
> +__FDT_IMAGE_EOF
> + cnt=$((cnt+1))
> +done
> +
> +cat << __CONF_HEADER_EOF
> + };
> + configurations {
> + default = "config at 1";
> +
> +__CONF_HEADER_EOF
> +
> +cnt=1
> +for dtname in $*
> +do
> + cat << __CONF_SECTION_EOF
> + config@$cnt {
> + description = "$(basename $dtname .dtb)";
> + firmware = "uboot at 1";
> + loadables = "atf at 1","atf at 2","atf at 3";
> + fdt = "fdt at 1";
> + };
> +__CONF_SECTION_EOF
> + cnt=$((cnt+1))
> +done
> +
> +cat << __ITS_EOF
> + };
> +};
> +__ITS_EOF
> --
> 1.9.1
>
> _______________________________________________
> U-Boot mailing list
> U-Boot at lists.denx.de
> https://lists.denx.de/listinfo/u-boot
>
>
^ permalink raw reply [flat|nested] 8+ messages in thread
* [U-Boot] [PATCH 2/3] rockchip: firefly-rk3399: add FIT for rk3399
2017-08-18 5:07 ` [U-Boot] [PATCH 2/3] rockchip: firefly-rk3399: add FIT for rk3399 Kever Yang
@ 2017-08-19 11:55 ` Mark Kettenis
0 siblings, 0 replies; 8+ messages in thread
From: Mark Kettenis @ 2017-08-19 11:55 UTC (permalink / raw)
To: u-boot
> From: Kever Yang <kever.yang@rock-chips.com>
> Date: Fri, 18 Aug 2017 13:07:05 +0800
>
> Enable SPL_FIT_GENERATOR with path for it.
> With this patch you can get u-boot.itb for rk3399-evb with:
You mean rk3399-firefly ;).
> > make u-boot.itb
>
> Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
Reviewed-by: Mark Kettenis <kettenis@openbsd.org>
Tested-by: Mark Kettenis <kettenis@openbsd.org>
> ---
>
> configs/firefly-rk3399_defconfig | 1 +
> 1 file changed, 1 insertion(+)
>
> diff --git a/configs/firefly-rk3399_defconfig b/configs/firefly-rk3399_defconfig
> index 67e14c1..2572933 100644
> --- a/configs/firefly-rk3399_defconfig
> +++ b/configs/firefly-rk3399_defconfig
> @@ -9,6 +9,7 @@ CONFIG_DEFAULT_DEVICE_TREE="rk3399-firefly"
> CONFIG_DEBUG_UART=y
> CONFIG_FIT=y
> CONFIG_SPL_LOAD_FIT=y
> +CONFIG_SPL_FIT_GENERATOR="board/rockchip/evb_rk3399/mk_fit_atf.sh"
> CONFIG_ENV_IS_IN_MMC=y
> # CONFIG_DISPLAY_CPUINFO is not set
> CONFIG_SPL_STACK_R=y
> --
> 1.9.1
>
> _______________________________________________
> U-Boot mailing list
> U-Boot at lists.denx.de
> https://lists.denx.de/listinfo/u-boot
>
>
^ permalink raw reply [flat|nested] 8+ messages in thread
* [U-Boot] [PATCH 3/3] rockchip: evb-rk3399: update document for board bring up
2017-08-18 5:07 ` [U-Boot] [PATCH 3/3] rockchip: evb-rk3399: update document for board bring up Kever Yang
@ 2017-08-19 11:58 ` Mark Kettenis
2017-08-21 12:01 ` [U-Boot] [U-Boot, " Philipp Tomsich
1 sibling, 0 replies; 8+ messages in thread
From: Mark Kettenis @ 2017-08-19 11:58 UTC (permalink / raw)
To: u-boot
> From: Kever Yang <kever.yang@rock-chips.com>
> Date: Fri, 18 Aug 2017 13:07:06 +0800
>
> Since we support ATF in SPL and add script for it, let's make the
> document up to date.
>
> Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
> ---
>
> board/rockchip/evb_rk3399/README | 79 ++++++++++++++++++++++++++++++++--------
> 1 file changed, 63 insertions(+), 16 deletions(-)
>
> diff --git a/board/rockchip/evb_rk3399/README b/board/rockchip/evb_rk3399/README
> index fb8bb19..9982848 100644
> --- a/board/rockchip/evb_rk3399/README
> +++ b/board/rockchip/evb_rk3399/README
> @@ -18,8 +18,8 @@ evb key features:
> * PMIC: rk808
> * debug console: UART2
>
> -In order to support Arm Trust Firmware(ATF), we need to use the
> -miniloader from rockchip which:
> +In order to support Arm Trust Firmware(ATF), we can use either SPL or
> +miniloader from rockchip to do:
> * do DRAM init
> * load and verify ATF image
> * load and verify U-Boot image
> @@ -32,8 +32,8 @@ Get the Source and prebuild binary
> > mkdir ~/evb_rk3399
> > cd ~/evb_rk3399
> > git clone https://github.com/ARM-software/arm-trusted-firmware.git
> - > git clone https://github.com/rockchip-linux/rkbin
> - > git clone https://github.com/rockchip-linux/rkflashtool
> + > git clone https://github.com/rockchip-linux/rkbin.git
> + > git clone https://github.com/rockchip-linux/rkdeveloptool.git
>
> Compile the ATF
> ===============
> @@ -42,32 +42,79 @@ Compile the ATF
> > make realclean
> > make CROSS_COMPILE=aarch64-linux-gnu- PLAT=rk3399 bl31
>
> + Or you can get the bl31.elf directly from Rockchip:
> + cp rkbin/rk33/rk3399_bl31_v1.00.elf ../u-boot/bl31.elf
> +
> + Get bl31.elf in this step, copy it to U-Boot root dir:
> + > cp bl31.elf ../u-boot/
> +
> Compile the U-Boot
> ==================
>
> > cd ../u-boot
> - > make CROSS_COMPILE=aarch64-linux-gnu- evb-rk3399_defconfig all
> + > export ARCH=arm64
> + > export CROSS_COMPILE=aarch64-linux-gnu-
> + > make evb-rk3399_defconfig
> + for firefly-rk3399, use below instead:
> + > make evb-firefly_defconfig
That should be firefly-rk3399_defconfig
> + > make
> + > make u-boot.itb
>
> -Compile the rkflashtool
> -=======================
> + Get spl/u-boot-spl.bin and u-boot.itb in this step.
>
> +Compile the rkdeveloptool
> +=======================
> + Follow instructions in latest README
> > cd ../rkflashtool
> + > autoreconf -i
> + > ./configure
> > make
> + > sudo make install
> +
> + Get rkdeveloptool in you Host in this step.
> +
> +Both origin binaries and Tool are ready now, choose either option 1 or
> +option 2 to deploy U-Boot.
> +
> +Package the image
> +=================
>
> -Package the image for miniloader
> -================================
> +Package the image for U-Boot SPL(option 1)
> +--------------------------------
> > cd ..
> - > cp arm-trusted-firmware/build/rk3399/release/bl31.bin rkbin/rk33
> + > tools/mkimage -n rk3399 -T rksd -d spl/u-boot-spl.bin idbspl.img
> +
> + Get idbspl.img in this step.
> +
> +Package the image for Rockchip miniloader(option 2)
> +------------------------------------------
> + > cd ..
> + > cp arm-trusted-firmware/build/rk3399/release/bl31.elf rkbin/rk33
> > ./rkbin/tools/trust_merger rkbin/tools/RK3399TRUST.ini
> > ./rkbin/tools/loaderimage --pack --uboot u-boot/u-boot-dtb.bin uboot.img
> - > mkdir image
> - > mv trust.img ./image/
> - > mv uboot.img ./image/rk3399evb-uboot.bin
>
> -Flash the image
> -===============
> + Get trust.img and uboot.img in this step.
> +
> +Flash the image to eMMC
> +=======================
> +
> +Flash the image with U-Boot SPL(option 1)
> +-------------------------------
> Power on(or reset with RESET KEY) with MASKROM KEY preesed, and then:
> + > rkdeveloptool db rkbin/rk33/rk3399_loader_v1.08.106.bin
> + > rkdeveloptool wl 64 u-boot/idbspl.img
> + > rkdeveloptool wl 512 u-boot/u-boot.itb
> + > rkdeveloptool rd
>
> - > ./rkflashtool/rkflashloader rk3399evb
> +Flash the image with Rockchip miniloader(option 2)
> +----------------------------------------
> +Power on(or reset with RESET KEY) with MASKROM KEY preesed, and then:
> + > rkdeveloptool db rkbin/rk33/rk3399_loader_v1.08.106.bin
> + > rkdeveloptool ul rkbin/rk33/rk3399_loader_v1.08.106.bin
> + > rkdeveloptool wl 0x4000 u-boot/uboot.img
> + > rkdeveloptool wl 0x6000 u-boot/trust.img
> + > rkdeveloptool rd
>
> You should be able to get U-Boot log message in console/UART2 now.
> +For more detail, please reference to:
> +http://opensource.rock-chips.com/wiki_Boot_option
> --
> 1.9.1
>
> _______________________________________________
> U-Boot mailing list
> U-Boot at lists.denx.de
> https://lists.denx.de/listinfo/u-boot
>
>
^ permalink raw reply [flat|nested] 8+ messages in thread
* [U-Boot] [U-Boot, 3/3] rockchip: evb-rk3399: update document for board bring up
2017-08-18 5:07 ` [U-Boot] [PATCH 3/3] rockchip: evb-rk3399: update document for board bring up Kever Yang
2017-08-19 11:58 ` Mark Kettenis
@ 2017-08-21 12:01 ` Philipp Tomsich
1 sibling, 0 replies; 8+ messages in thread
From: Philipp Tomsich @ 2017-08-21 12:01 UTC (permalink / raw)
To: u-boot
> Since we support ATF in SPL and add script for it, let's make the
> document up to date.
>
> Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
> ---
>
> board/rockchip/evb_rk3399/README | 79 ++++++++++++++++++++++++++++++++--------
> 1 file changed, 63 insertions(+), 16 deletions(-)
>
Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
^ permalink raw reply [flat|nested] 8+ messages in thread
* [U-Boot] [PATCH 1/3] rockchip: rk3399-evb: add script for atf fit
2017-08-18 5:07 [U-Boot] [PATCH 1/3] rockchip: rk3399-evb: add script for atf fit Kever Yang
` (2 preceding siblings ...)
2017-08-19 11:53 ` [U-Boot] [PATCH 1/3] rockchip: rk3399-evb: add script for atf fit Mark Kettenis
@ 2017-08-26 23:13 ` Simon Glass
3 siblings, 0 replies; 8+ messages in thread
From: Simon Glass @ 2017-08-26 23:13 UTC (permalink / raw)
To: u-boot
Hi,
On 17 August 2017 at 23:07, Kever Yang <kever.yang@rock-chips.com> wrote:
> Add a script to generate binaries from bl31.elf, and generate
> u-boot.its file for FIT image including u-boot, dtb and atf binaries.
>
> Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
> ---
>
> board/rockchip/evb_rk3399/mk_fit_atf.sh | 110 ++++++++++++++++++++++++++++++++
> 1 file changed, 110 insertions(+)
> create mode 100755 board/rockchip/evb_rk3399/mk_fit_atf.sh
Can you instead write this in python and put it in binman?
That is the tool which should be used to generate more complex firmware images.
^ permalink raw reply [flat|nested] 8+ messages in thread
end of thread, other threads:[~2017-08-26 23:13 UTC | newest]
Thread overview: 8+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2017-08-18 5:07 [U-Boot] [PATCH 1/3] rockchip: rk3399-evb: add script for atf fit Kever Yang
2017-08-18 5:07 ` [U-Boot] [PATCH 2/3] rockchip: firefly-rk3399: add FIT for rk3399 Kever Yang
2017-08-19 11:55 ` Mark Kettenis
2017-08-18 5:07 ` [U-Boot] [PATCH 3/3] rockchip: evb-rk3399: update document for board bring up Kever Yang
2017-08-19 11:58 ` Mark Kettenis
2017-08-21 12:01 ` [U-Boot] [U-Boot, " Philipp Tomsich
2017-08-19 11:53 ` [U-Boot] [PATCH 1/3] rockchip: rk3399-evb: add script for atf fit Mark Kettenis
2017-08-26 23:13 ` Simon Glass
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.