[PATCH] arm64: fpsimd: Prevent registers leaking across exec

[PATCH] arm64: fpsimd: Prevent registers leaking across exec

[Dave Martin]

commit 096622104e14d8a1db4860bd557717067a0515d2 upstream.

There are some tricky dependencies between the different stages of
flushing the FPSIMD register state during exec, and these can race
with context switch in ways that can cause the old task's regs to
leak across.  In particular, a context switch during the memset() can
cause some of the task's old FPSIMD registers to reappear.

Disabling preemption for this small window would be no big deal for
performance: preemption is already disabled for similar scenarios
like updating the FPSIMD registers in sigreturn.

So, instead of rearranging things in ways that might swap existing
subtle bugs for new ones, this patch just disables preemption
around the FPSIMD state flushing so that races of this type can't
occur here.  This brings fpsimd_flush_thread() into line with other
code paths.

Cc: <stable@vger.kernel.org> # 3.16.x
Cc: <stable@vger.kernel.org> # 4.1.x-4.9.x
Fixes: 674c242c9323 ("arm64: flush FP/SIMD state correctly after execve()")
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Dave Martin <Dave.Martin@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
---

For stable only.

3.17.x-4.0.x don't appear active, and this patch isn't sufficient to fix
them (they would need 674c242c9323 also).

 arch/arm64/kernel/fpsimd.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/arch/arm64/kernel/fpsimd.c b/arch/arm64/kernel/fpsimd.c
index 394c61d..1d5890f 100644
--- a/arch/arm64/kernel/fpsimd.c
+++ b/arch/arm64/kernel/fpsimd.c
@@ -157,9 +157,11 @@ void fpsimd_thread_switch(struct task_struct *next)
 
 void fpsimd_flush_thread(void)
 {
+	preempt_disable();
 	memset(&current->thread.fpsimd_state, 0, sizeof(struct fpsimd_state));
 	fpsimd_flush_task_state(current);
 	set_thread_flag(TIF_FOREIGN_FPSTATE);
+	preempt_enable();
 }
 
 /*
-- 
2.1.4

[PATCH] arm64: fpsimd: Prevent registers leaking across exec

[Dave Martin]

commit 096622104e14d8a1db4860bd557717067a0515d2 upstream.

There are some tricky dependencies between the different stages of
flushing the FPSIMD register state during exec, and these can race
with context switch in ways that can cause the old task's regs to
leak across.  In particular, a context switch during the memset() can
cause some of the task's old FPSIMD registers to reappear.

Disabling preemption for this small window would be no big deal for
performance: preemption is already disabled for similar scenarios
like updating the FPSIMD registers in sigreturn.

So, instead of rearranging things in ways that might swap existing
subtle bugs for new ones, this patch just disables preemption
around the FPSIMD state flushing so that races of this type can't
occur here.  This brings fpsimd_flush_thread() into line with other
code paths.

Cc: <stable@vger.kernel.org> # 3.16.x
Cc: <stable@vger.kernel.org> # 4.1.x-4.9.x
Fixes: 674c242c9323 ("arm64: flush FP/SIMD state correctly after execve()")
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Dave Martin <Dave.Martin@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
---

For stable only.

3.17.x-4.0.x don't appear active, and this patch isn't sufficient to fix
them (they would need 674c242c9323 also).

 arch/arm64/kernel/fpsimd.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/arch/arm64/kernel/fpsimd.c b/arch/arm64/kernel/fpsimd.c
index 394c61d..1d5890f 100644
--- a/arch/arm64/kernel/fpsimd.c
+++ b/arch/arm64/kernel/fpsimd.c
@@ -157,9 +157,11 @@ void fpsimd_thread_switch(struct task_struct *next)
 
 void fpsimd_flush_thread(void)
 {
+	preempt_disable();
 	memset(&current->thread.fpsimd_state, 0, sizeof(struct fpsimd_state));
 	fpsimd_flush_task_state(current);
 	set_thread_flag(TIF_FOREIGN_FPSTATE);
+	preempt_enable();
 }
 
 /*
-- 
2.1.4

Re: [PATCH] arm64: fpsimd: Prevent registers leaking across exec

[Greg KH]

On Tue, Aug 29, 2017 at 05:49:34PM +0100, Dave Martin wrote:
> commit 096622104e14d8a1db4860bd557717067a0515d2 upstream.
> 
> There are some tricky dependencies between the different stages of
> flushing the FPSIMD register state during exec, and these can race
> with context switch in ways that can cause the old task's regs to
> leak across.  In particular, a context switch during the memset() can
> cause some of the task's old FPSIMD registers to reappear.
> 
> Disabling preemption for this small window would be no big deal for
> performance: preemption is already disabled for similar scenarios
> like updating the FPSIMD registers in sigreturn.
> 
> So, instead of rearranging things in ways that might swap existing
> subtle bugs for new ones, this patch just disables preemption
> around the FPSIMD state flushing so that races of this type can't
> occur here.  This brings fpsimd_flush_thread() into line with other
> code paths.
> 
> Cc: <stable@vger.kernel.org> # 3.16.x
> Cc: <stable@vger.kernel.org> # 4.1.x-4.9.x
> Fixes: 674c242c9323 ("arm64: flush FP/SIMD state correctly after execve()")
> Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
> Signed-off-by: Dave Martin <Dave.Martin@arm.com>
> Signed-off-by: Will Deacon <will.deacon@arm.com>
> ---
> 
> For stable only.
> 
> 3.17.x-4.0.x don't appear active, and this patch isn't sufficient to fix
> them (they would need 674c242c9323 also).

3.18 is "semi-active" in that I'm trying to keep it alive for the
millions of devices that rely on it out in the world at the moment...

So I've queued up both of these patches for that tree, don't know why
3.18 didn't catch it in the first place.

thanks,

greg k-h

[PATCH] arm64: fpsimd: Prevent registers leaking across exec

[Greg KH]

On Tue, Aug 29, 2017 at 05:49:34PM +0100, Dave Martin wrote:
> commit 096622104e14d8a1db4860bd557717067a0515d2 upstream.
> 
> There are some tricky dependencies between the different stages of
> flushing the FPSIMD register state during exec, and these can race
> with context switch in ways that can cause the old task's regs to
> leak across.  In particular, a context switch during the memset() can
> cause some of the task's old FPSIMD registers to reappear.
> 
> Disabling preemption for this small window would be no big deal for
> performance: preemption is already disabled for similar scenarios
> like updating the FPSIMD registers in sigreturn.
> 
> So, instead of rearranging things in ways that might swap existing
> subtle bugs for new ones, this patch just disables preemption
> around the FPSIMD state flushing so that races of this type can't
> occur here.  This brings fpsimd_flush_thread() into line with other
> code paths.
> 
> Cc: <stable@vger.kernel.org> # 3.16.x
> Cc: <stable@vger.kernel.org> # 4.1.x-4.9.x
> Fixes: 674c242c9323 ("arm64: flush FP/SIMD state correctly after execve()")
> Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
> Signed-off-by: Dave Martin <Dave.Martin@arm.com>
> Signed-off-by: Will Deacon <will.deacon@arm.com>
> ---
> 
> For stable only.
> 
> 3.17.x-4.0.x don't appear active, and this patch isn't sufficient to fix
> them (they would need 674c242c9323 also).

3.18 is "semi-active" in that I'm trying to keep it alive for the
millions of devices that rely on it out in the world at the moment...

So I've queued up both of these patches for that tree, don't know why
3.18 didn't catch it in the first place.

thanks,

greg k-h

Re: [PATCH] arm64: fpsimd: Prevent registers leaking across exec

[Dave Martin]

On Thu, Aug 31, 2017 at 08:02:01AM +0200, Greg KH wrote:
> On Tue, Aug 29, 2017 at 05:49:34PM +0100, Dave Martin wrote:
> > commit 096622104e14d8a1db4860bd557717067a0515d2 upstream.
> > 
> > There are some tricky dependencies between the different stages of
> > flushing the FPSIMD register state during exec, and these can race
> > with context switch in ways that can cause the old task's regs to
> > leak across.  In particular, a context switch during the memset() can
> > cause some of the task's old FPSIMD registers to reappear.
> > 
> > Disabling preemption for this small window would be no big deal for
> > performance: preemption is already disabled for similar scenarios
> > like updating the FPSIMD registers in sigreturn.
> > 
> > So, instead of rearranging things in ways that might swap existing
> > subtle bugs for new ones, this patch just disables preemption
> > around the FPSIMD state flushing so that races of this type can't
> > occur here.  This brings fpsimd_flush_thread() into line with other
> > code paths.
> > 
> > Cc: <stable@vger.kernel.org> # 3.16.x
> > Cc: <stable@vger.kernel.org> # 4.1.x-4.9.x
> > Fixes: 674c242c9323 ("arm64: flush FP/SIMD state correctly after execve()")
> > Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
> > Signed-off-by: Dave Martin <Dave.Martin@arm.com>
> > Signed-off-by: Will Deacon <will.deacon@arm.com>
> > ---
> > 
> > For stable only.
> > 
> > 3.17.x-4.0.x don't appear active, and this patch isn't sufficient to fix
> > them (they would need 674c242c9323 also).
> 
> 3.18 is "semi-active" in that I'm trying to keep it alive for the
> millions of devices that rely on it out in the world at the moment...

Fair enough, I'll bear that in mind for future fixes.

Any ideas how long it's likely to linger for?

> So I've queued up both of these patches for that tree, don't know why

Thanks.

> 3.18 didn't catch it in the first place.

The commit referenced by the Fixes tag already wasn't in 3.18.x, though
that doesn't answer why that patch wasn't picked to 3.18.x in the first
place.  Dunno.

Cheers
---Dave

[PATCH] arm64: fpsimd: Prevent registers leaking across exec

[Dave Martin]

On Thu, Aug 31, 2017 at 08:02:01AM +0200, Greg KH wrote:
> On Tue, Aug 29, 2017 at 05:49:34PM +0100, Dave Martin wrote:
> > commit 096622104e14d8a1db4860bd557717067a0515d2 upstream.
> > 
> > There are some tricky dependencies between the different stages of
> > flushing the FPSIMD register state during exec, and these can race
> > with context switch in ways that can cause the old task's regs to
> > leak across.  In particular, a context switch during the memset() can
> > cause some of the task's old FPSIMD registers to reappear.
> > 
> > Disabling preemption for this small window would be no big deal for
> > performance: preemption is already disabled for similar scenarios
> > like updating the FPSIMD registers in sigreturn.
> > 
> > So, instead of rearranging things in ways that might swap existing
> > subtle bugs for new ones, this patch just disables preemption
> > around the FPSIMD state flushing so that races of this type can't
> > occur here.  This brings fpsimd_flush_thread() into line with other
> > code paths.
> > 
> > Cc: <stable@vger.kernel.org> # 3.16.x
> > Cc: <stable@vger.kernel.org> # 4.1.x-4.9.x
> > Fixes: 674c242c9323 ("arm64: flush FP/SIMD state correctly after execve()")
> > Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
> > Signed-off-by: Dave Martin <Dave.Martin@arm.com>
> > Signed-off-by: Will Deacon <will.deacon@arm.com>
> > ---
> > 
> > For stable only.
> > 
> > 3.17.x-4.0.x don't appear active, and this patch isn't sufficient to fix
> > them (they would need 674c242c9323 also).
> 
> 3.18 is "semi-active" in that I'm trying to keep it alive for the
> millions of devices that rely on it out in the world at the moment...

Fair enough, I'll bear that in mind for future fixes.

Any ideas how long it's likely to linger for?

> So I've queued up both of these patches for that tree, don't know why

Thanks.

> 3.18 didn't catch it in the first place.

The commit referenced by the Fixes tag already wasn't in 3.18.x, though
that doesn't answer why that patch wasn't picked to 3.18.x in the first
place.  Dunno.

Cheers
---Dave

Re: [PATCH] arm64: fpsimd: Prevent registers leaking across exec

[Greg KH]

On Fri, Sep 01, 2017 at 05:16:15PM +0100, Dave Martin wrote:
> On Thu, Aug 31, 2017 at 08:02:01AM +0200, Greg KH wrote:
> > On Tue, Aug 29, 2017 at 05:49:34PM +0100, Dave Martin wrote:
> > > commit 096622104e14d8a1db4860bd557717067a0515d2 upstream.
> > > 
> > > There are some tricky dependencies between the different stages of
> > > flushing the FPSIMD register state during exec, and these can race
> > > with context switch in ways that can cause the old task's regs to
> > > leak across.  In particular, a context switch during the memset() can
> > > cause some of the task's old FPSIMD registers to reappear.
> > > 
> > > Disabling preemption for this small window would be no big deal for
> > > performance: preemption is already disabled for similar scenarios
> > > like updating the FPSIMD registers in sigreturn.
> > > 
> > > So, instead of rearranging things in ways that might swap existing
> > > subtle bugs for new ones, this patch just disables preemption
> > > around the FPSIMD state flushing so that races of this type can't
> > > occur here.  This brings fpsimd_flush_thread() into line with other
> > > code paths.
> > > 
> > > Cc: <stable@vger.kernel.org> # 3.16.x
> > > Cc: <stable@vger.kernel.org> # 4.1.x-4.9.x
> > > Fixes: 674c242c9323 ("arm64: flush FP/SIMD state correctly after execve()")
> > > Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
> > > Signed-off-by: Dave Martin <Dave.Martin@arm.com>
> > > Signed-off-by: Will Deacon <will.deacon@arm.com>
> > > ---
> > > 
> > > For stable only.
> > > 
> > > 3.17.x-4.0.x don't appear active, and this patch isn't sufficient to fix
> > > them (they would need 674c242c9323 also).
> > 
> > 3.18 is "semi-active" in that I'm trying to keep it alive for the
> > millions of devices that rely on it out in the world at the moment...
> 
> Fair enough, I'll bear that in mind for future fixes.
> 
> Any ideas how long it's likely to linger for?

No idea, probably until I get really sick of it.  If you, or any company
you know, relies on it, please let me know and I'll be glad to talk
about it with you...

thanks,

greg k-h

[PATCH] arm64: fpsimd: Prevent registers leaking across exec

[Greg KH]

On Fri, Sep 01, 2017 at 05:16:15PM +0100, Dave Martin wrote:
> On Thu, Aug 31, 2017 at 08:02:01AM +0200, Greg KH wrote:
> > On Tue, Aug 29, 2017 at 05:49:34PM +0100, Dave Martin wrote:
> > > commit 096622104e14d8a1db4860bd557717067a0515d2 upstream.
> > > 
> > > There are some tricky dependencies between the different stages of
> > > flushing the FPSIMD register state during exec, and these can race
> > > with context switch in ways that can cause the old task's regs to
> > > leak across.  In particular, a context switch during the memset() can
> > > cause some of the task's old FPSIMD registers to reappear.
> > > 
> > > Disabling preemption for this small window would be no big deal for
> > > performance: preemption is already disabled for similar scenarios
> > > like updating the FPSIMD registers in sigreturn.
> > > 
> > > So, instead of rearranging things in ways that might swap existing
> > > subtle bugs for new ones, this patch just disables preemption
> > > around the FPSIMD state flushing so that races of this type can't
> > > occur here.  This brings fpsimd_flush_thread() into line with other
> > > code paths.
> > > 
> > > Cc: <stable@vger.kernel.org> # 3.16.x
> > > Cc: <stable@vger.kernel.org> # 4.1.x-4.9.x
> > > Fixes: 674c242c9323 ("arm64: flush FP/SIMD state correctly after execve()")
> > > Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
> > > Signed-off-by: Dave Martin <Dave.Martin@arm.com>
> > > Signed-off-by: Will Deacon <will.deacon@arm.com>
> > > ---
> > > 
> > > For stable only.
> > > 
> > > 3.17.x-4.0.x don't appear active, and this patch isn't sufficient to fix
> > > them (they would need 674c242c9323 also).
> > 
> > 3.18 is "semi-active" in that I'm trying to keep it alive for the
> > millions of devices that rely on it out in the world at the moment...
> 
> Fair enough, I'll bear that in mind for future fixes.
> 
> Any ideas how long it's likely to linger for?

No idea, probably until I get really sick of it.  If you, or any company
you know, relies on it, please let me know and I'll be glad to talk
about it with you...

thanks,

greg k-h

[PATCH] arm64: fpsimd: Prevent registers leaking across exec

[Dave Martin]

There are some tricky dependencies between the different stages of
flushing the FPSIMD register state during exec, and these can race
with context switch in ways that can cause the old task's regs to
leak across.  In particular, a context switch during the memset() can
cause some of the task's old FPSIMD registers to reappear.

Disabling preemption for this small window would be no big deal for
performance: preemption is already disabled for similar scenarios
like updating the FPSIMD registers in sigreturn.

So, instead of rearranging things in ways that might swap existing
subtle bugs for new ones, this patch just disables preemption
around the FPSIMD state flushing so that races of this type can't
occur here.  This brings fpsimd_flush_thread() into line with other
code paths.

Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: stable@vger.kernel.org
Fixes: 674c242c9323 ("arm64: flush FP/SIMD state correctly after execve()")
Signed-off-by: Dave Martin <Dave.Martin@arm.com>
---

NOTE TO MAINTAINERS: This is a fix, applicable to *v4.13* and stable.

The kernel-mode NEON rework already queued for v4.14 turns this into a
local_bh_disable() as a side effect, so does not strictly need this
patch.  When merging, the queued v4.14 changes should be retained.

 arch/arm64/kernel/fpsimd.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/arch/arm64/kernel/fpsimd.c b/arch/arm64/kernel/fpsimd.c
index 06da8ea..c7b4995 100644
--- a/arch/arm64/kernel/fpsimd.c
+++ b/arch/arm64/kernel/fpsimd.c
@@ -161,9 +161,11 @@ void fpsimd_flush_thread(void)
 {
 	if (!system_supports_fpsimd())
 		return;
+	preempt_disable();
 	memset(&current->thread.fpsimd_state, 0, sizeof(struct fpsimd_state));
 	fpsimd_flush_task_state(current);
 	set_thread_flag(TIF_FOREIGN_FPSTATE);
+	preempt_enable();
 }
 
 /*
-- 
2.1.4

[PATCH] arm64: fpsimd: Prevent registers leaking across exec

[Dave Martin]

There are some tricky dependencies between the different stages of
flushing the FPSIMD register state during exec, and these can race
with context switch in ways that can cause the old task's regs to
leak across.  In particular, a context switch during the memset() can
cause some of the task's old FPSIMD registers to reappear.

Disabling preemption for this small window would be no big deal for
performance: preemption is already disabled for similar scenarios
like updating the FPSIMD registers in sigreturn.

So, instead of rearranging things in ways that might swap existing
subtle bugs for new ones, this patch just disables preemption
around the FPSIMD state flushing so that races of this type can't
occur here.  This brings fpsimd_flush_thread() into line with other
code paths.

Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: stable at vger.kernel.org
Fixes: 674c242c9323 ("arm64: flush FP/SIMD state correctly after execve()")
Signed-off-by: Dave Martin <Dave.Martin@arm.com>
---

NOTE TO MAINTAINERS: This is a fix, applicable to *v4.13* and stable.

The kernel-mode NEON rework already queued for v4.14 turns this into a
local_bh_disable() as a side effect, so does not strictly need this
patch.  When merging, the queued v4.14 changes should be retained.

 arch/arm64/kernel/fpsimd.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/arch/arm64/kernel/fpsimd.c b/arch/arm64/kernel/fpsimd.c
index 06da8ea..c7b4995 100644
--- a/arch/arm64/kernel/fpsimd.c
+++ b/arch/arm64/kernel/fpsimd.c
@@ -161,9 +161,11 @@ void fpsimd_flush_thread(void)
 {
 	if (!system_supports_fpsimd())
 		return;
+	preempt_disable();
 	memset(&current->thread.fpsimd_state, 0, sizeof(struct fpsimd_state));
 	fpsimd_flush_task_state(current);
 	set_thread_flag(TIF_FOREIGN_FPSTATE);
+	preempt_enable();
 }
 
 /*
-- 
2.1.4

Re: [PATCH] arm64: fpsimd: Prevent registers leaking across exec

[Ard Biesheuvel]

On 18 August 2017 at 16:57, Dave Martin <Dave.Martin@arm.com> wrote:
> There are some tricky dependencies between the different stages of
> flushing the FPSIMD register state during exec, and these can race
> with context switch in ways that can cause the old task's regs to
> leak across.  In particular, a context switch during the memset() can
> cause some of the task's old FPSIMD registers to reappear.
>
> Disabling preemption for this small window would be no big deal for
> performance: preemption is already disabled for similar scenarios
> like updating the FPSIMD registers in sigreturn.
>
> So, instead of rearranging things in ways that might swap existing
> subtle bugs for new ones, this patch just disables preemption
> around the FPSIMD state flushing so that races of this type can't
> occur here.  This brings fpsimd_flush_thread() into line with other
> code paths.
>
> Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
> Cc: stable@vger.kernel.org
> Fixes: 674c242c9323 ("arm64: flush FP/SIMD state correctly after execve()")
> Signed-off-by: Dave Martin <Dave.Martin@arm.com>

Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>

> ---
>
> NOTE TO MAINTAINERS: This is a fix, applicable to *v4.13* and stable.
>
> The kernel-mode NEON rework already queued for v4.14 turns this into a
> local_bh_disable() as a side effect, so does not strictly need this
> patch.  When merging, the queued v4.14 changes should be retained.
>
>  arch/arm64/kernel/fpsimd.c | 2 ++
>  1 file changed, 2 insertions(+)
>
> diff --git a/arch/arm64/kernel/fpsimd.c b/arch/arm64/kernel/fpsimd.c
> index 06da8ea..c7b4995 100644
> --- a/arch/arm64/kernel/fpsimd.c
> +++ b/arch/arm64/kernel/fpsimd.c
> @@ -161,9 +161,11 @@ void fpsimd_flush_thread(void)
>  {
>         if (!system_supports_fpsimd())
>                 return;
> +       preempt_disable();
>         memset(&current->thread.fpsimd_state, 0, sizeof(struct fpsimd_state));
>         fpsimd_flush_task_state(current);
>         set_thread_flag(TIF_FOREIGN_FPSTATE);
> +       preempt_enable();
>  }
>
>  /*
> --
> 2.1.4
>

[PATCH] arm64: fpsimd: Prevent registers leaking across exec

[Ard Biesheuvel]

On 18 August 2017 at 16:57, Dave Martin <Dave.Martin@arm.com> wrote:
> There are some tricky dependencies between the different stages of
> flushing the FPSIMD register state during exec, and these can race
> with context switch in ways that can cause the old task's regs to
> leak across.  In particular, a context switch during the memset() can
> cause some of the task's old FPSIMD registers to reappear.
>
> Disabling preemption for this small window would be no big deal for
> performance: preemption is already disabled for similar scenarios
> like updating the FPSIMD registers in sigreturn.
>
> So, instead of rearranging things in ways that might swap existing
> subtle bugs for new ones, this patch just disables preemption
> around the FPSIMD state flushing so that races of this type can't
> occur here.  This brings fpsimd_flush_thread() into line with other
> code paths.
>
> Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
> Cc: stable at vger.kernel.org
> Fixes: 674c242c9323 ("arm64: flush FP/SIMD state correctly after execve()")
> Signed-off-by: Dave Martin <Dave.Martin@arm.com>

Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>

> ---
>
> NOTE TO MAINTAINERS: This is a fix, applicable to *v4.13* and stable.
>
> The kernel-mode NEON rework already queued for v4.14 turns this into a
> local_bh_disable() as a side effect, so does not strictly need this
> patch.  When merging, the queued v4.14 changes should be retained.
>
>  arch/arm64/kernel/fpsimd.c | 2 ++
>  1 file changed, 2 insertions(+)
>
> diff --git a/arch/arm64/kernel/fpsimd.c b/arch/arm64/kernel/fpsimd.c
> index 06da8ea..c7b4995 100644
> --- a/arch/arm64/kernel/fpsimd.c
> +++ b/arch/arm64/kernel/fpsimd.c
> @@ -161,9 +161,11 @@ void fpsimd_flush_thread(void)
>  {
>         if (!system_supports_fpsimd())
>                 return;
> +       preempt_disable();
>         memset(&current->thread.fpsimd_state, 0, sizeof(struct fpsimd_state));
>         fpsimd_flush_task_state(current);
>         set_thread_flag(TIF_FOREIGN_FPSTATE);
> +       preempt_enable();
>  }
>
>  /*
> --
> 2.1.4
>