[PATCH v5 0/3] PCI hotplug feature

[PATCH v5 0/3] PCI hotplug feature

[Oza Pawandeep]

These patches bring in PCI hotplug support for iproc family chipsets.

It includes DT binding documentation and, the implementation in
iproc pcie RC driver.

Changes since v3:
Rebased to pci-next
Added; Acked-by: Rob Herring <robh@kernel.org>

Changes since v3:
Resend. just to be in sync previous in-flight patches.

Changes since v2:
Addressed Rob Herring's comments.
Changed subject to "dt-bindings: PCI:..."
Made generic PCI hotplug properties 'slot-pluggable' and 'prsnt-gpios'
Rebased the patches on top of Lorenzo's patches.

Oza Pawandeep (3):
  dt-bindings: PCI: Add PCI hotplug property
  dt-bindings: PCI iproc: Implement optional property prsnt-gpios
  PCI: iproc: Implement PCI hotplug support

 .../devicetree/bindings/pci/brcm,iproc-pcie.txt    |  14 ++
 Documentation/devicetree/bindings/pci/pci.txt      |  15 ++
 drivers/pci/host/pcie-iproc-platform.c             |   3 +
 drivers/pci/host/pcie-iproc.c                      | 166 ++++++++++++++++++---
 drivers/pci/host/pcie-iproc.h                      |   7 +
 5 files changed, 187 insertions(+), 18 deletions(-)

-- 
1.9.1

[PATCH v5 0/3] PCI hotplug feature

[Oza Pawandeep]

These patches bring in PCI hotplug support for iproc family chipsets.

It includes DT binding documentation and, the implementation in
iproc pcie RC driver.

Changes since v3:
Rebased to pci-next
Added; Acked-by: Rob Herring <robh@kernel.org>

Changes since v3:
Resend. just to be in sync previous in-flight patches.

Changes since v2:
Addressed Rob Herring's comments.
Changed subject to "dt-bindings: PCI:..."
Made generic PCI hotplug properties 'slot-pluggable' and 'prsnt-gpios'
Rebased the patches on top of Lorenzo's patches.

Oza Pawandeep (3):
  dt-bindings: PCI: Add PCI hotplug property
  dt-bindings: PCI iproc: Implement optional property prsnt-gpios
  PCI: iproc: Implement PCI hotplug support

 .../devicetree/bindings/pci/brcm,iproc-pcie.txt    |  14 ++
 Documentation/devicetree/bindings/pci/pci.txt      |  15 ++
 drivers/pci/host/pcie-iproc-platform.c             |   3 +
 drivers/pci/host/pcie-iproc.c                      | 166 ++++++++++++++++++---
 drivers/pci/host/pcie-iproc.h                      |   7 +
 5 files changed, 187 insertions(+), 18 deletions(-)

-- 
1.9.1

[PATCH v5 0/3] PCI hotplug feature

[Oza Pawandeep]

These patches bring in PCI hotplug support for iproc family chipsets.

It includes DT binding documentation and, the implementation in
iproc pcie RC driver.

Changes since v3:
Rebased to pci-next
Added; Acked-by: Rob Herring <robh@kernel.org>

Changes since v3:
Resend. just to be in sync previous in-flight patches.

Changes since v2:
Addressed Rob Herring's comments.
Changed subject to "dt-bindings: PCI:..."
Made generic PCI hotplug properties 'slot-pluggable' and 'prsnt-gpios'
Rebased the patches on top of Lorenzo's patches.

Oza Pawandeep (3):
  dt-bindings: PCI: Add PCI hotplug property
  dt-bindings: PCI iproc: Implement optional property prsnt-gpios
  PCI: iproc: Implement PCI hotplug support

 .../devicetree/bindings/pci/brcm,iproc-pcie.txt    |  14 ++
 Documentation/devicetree/bindings/pci/pci.txt      |  15 ++
 drivers/pci/host/pcie-iproc-platform.c             |   3 +
 drivers/pci/host/pcie-iproc.c                      | 166 ++++++++++++++++++---
 drivers/pci/host/pcie-iproc.h                      |   7 +
 5 files changed, 187 insertions(+), 18 deletions(-)

-- 
1.9.1

[PATCH v5 1/3] dt-bindings: PCI: Add PCI hotplug property

[Oza Pawandeep]

Host drivers have the requirement of implementing PCI hotplug
based on the how their SOC supports it.

Couple of properties have been added. the one to enable
the hotplug feature itself, and the other caters to
the PCI hotplug implementation with the use of gpios.

Signed-off-by: Oza Pawandeep <oza.oza@broadcom.com>
Acked-by: Rob Herring <robh@kernel.org>

diff --git a/Documentation/devicetree/bindings/pci/pci.txt b/Documentation/devicetree/bindings/pci/pci.txt
index 50f9e2c..0bf25a1 100644
--- a/Documentation/devicetree/bindings/pci/pci.txt
+++ b/Documentation/devicetree/bindings/pci/pci.txt
@@ -24,3 +24,18 @@ driver implementation may support the following properties:
    unsupported link speed, for instance, trying to do training for
    unsupported link speed, etc.  Must be '4' for gen4, '3' for gen3, '2'
    for gen2, and '1' for gen1. Any other values are invalid.
+
+- slot-pluggable:
+   PCI hotplug feature is supported.
+   PCI hotplug implementation is SOC/Board specific, and also it depends on
+   how add-in card is designed (e.g. how many present pins are implemented).
+   If the slot-pluggable property is present, the following propertey could
+   become effective.
+   - prsnt-gpios:
+      Array of gpios, could be present if hotplug is supported.
+      This property defines gpio based hotplug implementation.
+      Example:
+      If x8 card is connected, then it might be possible that all the
+      3 present pins could go low, or at least one pin goes low.
+      If x4 card is connected, then it might be possible that 2 present
+      pins go low, or at least one pin goes low.
-- 
1.9.1

[PATCH v5 1/3] dt-bindings: PCI: Add PCI hotplug property

[Oza Pawandeep]

Host drivers have the requirement of implementing PCI hotplug
based on the how their SOC supports it.

Couple of properties have been added. the one to enable
the hotplug feature itself, and the other caters to
the PCI hotplug implementation with the use of gpios.

Signed-off-by: Oza Pawandeep <oza.oza@broadcom.com>
Acked-by: Rob Herring <robh@kernel.org>

diff --git a/Documentation/devicetree/bindings/pci/pci.txt b/Documentation/devicetree/bindings/pci/pci.txt
index 50f9e2c..0bf25a1 100644
--- a/Documentation/devicetree/bindings/pci/pci.txt
+++ b/Documentation/devicetree/bindings/pci/pci.txt
@@ -24,3 +24,18 @@ driver implementation may support the following properties:
    unsupported link speed, for instance, trying to do training for
    unsupported link speed, etc.  Must be '4' for gen4, '3' for gen3, '2'
    for gen2, and '1' for gen1. Any other values are invalid.
+
+- slot-pluggable:
+   PCI hotplug feature is supported.
+   PCI hotplug implementation is SOC/Board specific, and also it depends on
+   how add-in card is designed (e.g. how many present pins are implemented).
+   If the slot-pluggable property is present, the following propertey could
+   become effective.
+   - prsnt-gpios:
+      Array of gpios, could be present if hotplug is supported.
+      This property defines gpio based hotplug implementation.
+      Example:
+      If x8 card is connected, then it might be possible that all the
+      3 present pins could go low, or at least one pin goes low.
+      If x4 card is connected, then it might be possible that 2 present
+      pins go low, or at least one pin goes low.
-- 
1.9.1

[PATCH v5 1/3] dt-bindings: PCI: Add PCI hotplug property

[Oza Pawandeep]

Host drivers have the requirement of implementing PCI hotplug
based on the how their SOC supports it.

Couple of properties have been added. the one to enable
the hotplug feature itself, and the other caters to
the PCI hotplug implementation with the use of gpios.

Signed-off-by: Oza Pawandeep <oza.oza@broadcom.com>
Acked-by: Rob Herring <robh@kernel.org>

diff --git a/Documentation/devicetree/bindings/pci/pci.txt b/Documentation/devicetree/bindings/pci/pci.txt
index 50f9e2c..0bf25a1 100644
--- a/Documentation/devicetree/bindings/pci/pci.txt
+++ b/Documentation/devicetree/bindings/pci/pci.txt
@@ -24,3 +24,18 @@ driver implementation may support the following properties:
    unsupported link speed, for instance, trying to do training for
    unsupported link speed, etc.  Must be '4' for gen4, '3' for gen3, '2'
    for gen2, and '1' for gen1. Any other values are invalid.
+
+- slot-pluggable:
+   PCI hotplug feature is supported.
+   PCI hotplug implementation is SOC/Board specific, and also it depends on
+   how add-in card is designed (e.g. how many present pins are implemented).
+   If the slot-pluggable property is present, the following propertey could
+   become effective.
+   - prsnt-gpios:
+      Array of gpios, could be present if hotplug is supported.
+      This property defines gpio based hotplug implementation.
+      Example:
+      If x8 card is connected, then it might be possible that all the
+      3 present pins could go low, or at least one pin goes low.
+      If x4 card is connected, then it might be possible that 2 present
+      pins go low, or at least one pin goes low.
-- 
1.9.1

[PATCH v5 2/3] dt-bindings: PCI iproc: Implement optional property prsnt-gpios

[Oza Pawandeep]

Add description for optional device tree property
'prsnt-gpios' for PCI hotplug feature.

Signed-off-by: Oza Pawandeep <oza.oza@broadcom.com>
Reviewed-by: Ray Jui <ray.jui@broadcom.com>
Acked-by: Rob Herring <robh@kernel.org>

diff --git a/Documentation/devicetree/bindings/pci/brcm,iproc-pcie.txt b/Documentation/devicetree/bindings/pci/brcm,iproc-pcie.txt
index b8e48b4..0c5f631 100644
--- a/Documentation/devicetree/bindings/pci/brcm,iproc-pcie.txt
+++ b/Documentation/devicetree/bindings/pci/brcm,iproc-pcie.txt
@@ -72,6 +72,20 @@ Optional properties:
 - brcm,pcie-msi-inten: Needs to be present for some older iProc platforms that
 require the interrupt enable registers to be set explicitly to enable MSI
 
+Optional properties:
+- slot-pluggable: PCI hotplug feature is supported.
+- prsnt-gpios: Array of gpios, needs to be present if Hotplug is supported.
+
+Refer to the following binding documents for more detailed description on
+the use of 'slot-pluggable' and 'prsnt-gpios'.
+  Documentation/devicetree/bindings/pci/pci.txt
+
+Example:
+prsnt-gpios: <&pca9505 32 1>, <&pca9505 33 1>;
+This is x4 connector: monitoring max 2 present lines.
+prsnt-gpios: <&pca9505 32 1>, <&pca9505 33 1>, <&pca9505 34 1>;
+This is x8 connector: monitoring max 3 present lines.
+
 Example:
 	pcie0: pcie@18012000 {
 		compatible = "brcm,iproc-pcie";
-- 
1.9.1

[PATCH v5 2/3] dt-bindings: PCI iproc: Implement optional property prsnt-gpios

[Oza Pawandeep]

Add description for optional device tree property
'prsnt-gpios' for PCI hotplug feature.

Signed-off-by: Oza Pawandeep <oza.oza@broadcom.com>
Reviewed-by: Ray Jui <ray.jui@broadcom.com>
Acked-by: Rob Herring <robh@kernel.org>

diff --git a/Documentation/devicetree/bindings/pci/brcm,iproc-pcie.txt b/Documentation/devicetree/bindings/pci/brcm,iproc-pcie.txt
index b8e48b4..0c5f631 100644
--- a/Documentation/devicetree/bindings/pci/brcm,iproc-pcie.txt
+++ b/Documentation/devicetree/bindings/pci/brcm,iproc-pcie.txt
@@ -72,6 +72,20 @@ Optional properties:
 - brcm,pcie-msi-inten: Needs to be present for some older iProc platforms that
 require the interrupt enable registers to be set explicitly to enable MSI
 
+Optional properties:
+- slot-pluggable: PCI hotplug feature is supported.
+- prsnt-gpios: Array of gpios, needs to be present if Hotplug is supported.
+
+Refer to the following binding documents for more detailed description on
+the use of 'slot-pluggable' and 'prsnt-gpios'.
+  Documentation/devicetree/bindings/pci/pci.txt
+
+Example:
+prsnt-gpios: <&pca9505 32 1>, <&pca9505 33 1>;
+This is x4 connector: monitoring max 2 present lines.
+prsnt-gpios: <&pca9505 32 1>, <&pca9505 33 1>, <&pca9505 34 1>;
+This is x8 connector: monitoring max 3 present lines.
+
 Example:
 	pcie0: pcie at 18012000 {
 		compatible = "brcm,iproc-pcie";
-- 
1.9.1

[PATCH v5 2/3] dt-bindings: PCI iproc: Implement optional property prsnt-gpios

[Oza Pawandeep]

Add description for optional device tree property
'prsnt-gpios' for PCI hotplug feature.

Signed-off-by: Oza Pawandeep <oza.oza@broadcom.com>
Reviewed-by: Ray Jui <ray.jui@broadcom.com>
Acked-by: Rob Herring <robh@kernel.org>

diff --git a/Documentation/devicetree/bindings/pci/brcm,iproc-pcie.txt b/Documentation/devicetree/bindings/pci/brcm,iproc-pcie.txt
index b8e48b4..0c5f631 100644
--- a/Documentation/devicetree/bindings/pci/brcm,iproc-pcie.txt
+++ b/Documentation/devicetree/bindings/pci/brcm,iproc-pcie.txt
@@ -72,6 +72,20 @@ Optional properties:
 - brcm,pcie-msi-inten: Needs to be present for some older iProc platforms that
 require the interrupt enable registers to be set explicitly to enable MSI
 
+Optional properties:
+- slot-pluggable: PCI hotplug feature is supported.
+- prsnt-gpios: Array of gpios, needs to be present if Hotplug is supported.
+
+Refer to the following binding documents for more detailed description on
+the use of 'slot-pluggable' and 'prsnt-gpios'.
+  Documentation/devicetree/bindings/pci/pci.txt
+
+Example:
+prsnt-gpios: <&pca9505 32 1>, <&pca9505 33 1>;
+This is x4 connector: monitoring max 2 present lines.
+prsnt-gpios: <&pca9505 32 1>, <&pca9505 33 1>, <&pca9505 34 1>;
+This is x8 connector: monitoring max 3 present lines.
+
 Example:
 	pcie0: pcie@18012000 {
 		compatible = "brcm,iproc-pcie";
-- 
1.9.1

[PATCH v5 3/3] PCI: iproc: Implement PCI hotplug support

[Oza Pawandeep]

This patch implements PCI hotplug support for iproc family chipsets.

iproc based SOC (e.g. Stingray) does not have hotplug controller
integrated.
Hence, standard PCI hotplug framework hooks can-not be used.
e.g. controlled power up/down of slot.

The mechanism, for e.g. Stingray has adopted for PCI hotplug is as follows:
PCI present lines are input to GPIOs depending on the type of
connector (x2, x4, x8).

GPIO array needs to be present if hotplug is supported.
HW implementation is SOC/Board specific, and also it depends on how
add-in card is designed
(e.g. how many present pins are implemented).

If x8 card is connected, then it might be possible that all the
3 present pins could go low, or at least one pin goes low.
If x4 card is connected, then it might be possible that 2 present
pins go low, or at least one pin goes low.

The implementation essentially takes care of following:
> Initializing hotplug irq thread.
> Detecting the endpoint device based on link state.
> Handling PERST and detecting the plugged devices.
> Ordered Hot plug-out, where User is expected
  to write 1 to /sys/bus/pci/devices/<pci_dev>/remove
> Handling spurious interrupt
> Handling multiple interrupts and makes sure that card is
  enumerated only once.

Signed-off-by: Oza Pawandeep <oza.oza@broadcom.com>
Reviewed-by: Ray Jui <ray.jui@broadcom.com>

diff --git a/drivers/pci/host/pcie-iproc-platform.c b/drivers/pci/host/pcie-iproc-platform.c
index a5073a9..6287a43 100644
--- a/drivers/pci/host/pcie-iproc-platform.c
+++ b/drivers/pci/host/pcie-iproc-platform.c
@@ -92,6 +92,9 @@ static int iproc_pcie_pltfm_probe(struct platform_device *pdev)
 		pcie->need_ob_cfg = true;
 	}
 
+	if (of_property_read_bool(np, "slot-pluggable"))
+		pcie->enable_hotplug = true;
+
 	/* PHY use is optional */
 	pcie->phy = devm_phy_get(dev, "pcie-phy");
 	if (IS_ERR(pcie->phy)) {
diff --git a/drivers/pci/host/pcie-iproc.c b/drivers/pci/host/pcie-iproc.c
index 8bd5e54..2b4d830 100644
--- a/drivers/pci/host/pcie-iproc.c
+++ b/drivers/pci/host/pcie-iproc.c
@@ -28,6 +28,7 @@
 #include <linux/of_irq.h>
 #include <linux/of_platform.h>
 #include <linux/phy/phy.h>
+#include <linux/gpio.h>
 
 #include "pcie-iproc.h"
 
@@ -65,6 +66,17 @@
 #define PCIE_DL_ACTIVE_SHIFT         2
 #define PCIE_DL_ACTIVE               BIT(PCIE_DL_ACTIVE_SHIFT)
 
+#define CFG_RC_LTSSM                 0x1cf8
+#define CFG_RC_PHY_CTL               0x1804
+#define CFG_RC_LTSSM_TIMEOUT         1000
+#define CFG_RC_LTSSM_STATE_MASK      0xff
+#define CFG_RC_LTSSM_STATE_L1        0x1
+
+#define CFG_RC_CLR_LTSSM_HIST_SHIFT  29
+#define CFG_RC_CLR_LTSSM_HIST_MASK   BIT(CFG_RC_CLR_LTSSM_HIST_SHIFT)
+#define CFG_RC_CLR_RECOV_HIST_SHIFT  31
+#define CFG_RC_CLR_RECOV_HIST_MASK   BIT(CFG_RC_CLR_RECOV_HIST_SHIFT)
+
 #define APB_ERR_EN_SHIFT             0
 #define APB_ERR_EN                   BIT(APB_ERR_EN_SHIFT)
 
@@ -1354,13 +1366,107 @@ static int iproc_pcie_rev_init(struct iproc_pcie *pcie)
 	return 0;
 }
 
+static bool iproc_pci_hp_check_ltssm(struct iproc_pcie *pcie)
+{
+	struct pci_bus *bus = pcie->root_bus;
+	u32 val, timeout = CFG_RC_LTSSM_TIMEOUT;
+
+	/* Clear LTSSM history. */
+	pci_bus_read_config_dword(pcie->root_bus, 0,
+				  CFG_RC_PHY_CTL, &val);
+	pci_bus_write_config_dword(bus, 0, CFG_RC_PHY_CTL,
+				   val | CFG_RC_CLR_RECOV_HIST_MASK |
+				   CFG_RC_CLR_LTSSM_HIST_MASK);
+	/* write back the origional value. */
+	pci_bus_write_config_dword(bus, 0, CFG_RC_PHY_CTL, val);
+
+	do {
+		pci_bus_read_config_dword(pcie->root_bus, 0,
+					  CFG_RC_LTSSM, &val);
+		/* check link state to see if link moved to L1 state. */
+		if ((val & CFG_RC_LTSSM_STATE_MASK) ==
+		     CFG_RC_LTSSM_STATE_L1)
+			return true;
+		timeout--;
+		usleep_range(500, 1000);
+	} while (timeout);
+
+	return false;
+}
+
+static irqreturn_t iproc_pci_hotplug_thread(int irq, void *data)
+{
+	struct iproc_pcie *pcie = data;
+	struct pci_bus *bus = pcie->root_bus, *child;
+	bool link_status;
+
+	iproc_pcie_perst_ctrl(pcie, true);
+	iproc_pcie_perst_ctrl(pcie, false);
+
+	link_status = iproc_pci_hp_check_ltssm(pcie);
+
+	if (link_status &&
+	    !iproc_pcie_check_link(pcie) &&
+	    !pcie->ep_is_present) {
+		pci_rescan_bus(bus);
+		list_for_each_entry(child, &bus->children, node)
+			pcie_bus_configure_settings(child);
+		pcie->ep_is_present = true;
+		dev_info(pcie->dev,
+			 "PCI Hotplug: <device detected and enumerated>\n");
+	} else if (link_status && pcie->ep_is_present)
+		/*
+		 * ep_is_present makes sure, enumuration done only once.
+		 * So it can handle spurious intrrupts, and also if we
+		 * get multiple interrupts for all the implemented pins,
+		 * we handle it only once.
+		 */
+		dev_info(pcie->dev,
+			 "PCI Hotplug: <device already present>\n");
+	else {
+		iproc_pcie_perst_ctrl(pcie, true);
+		pcie->ep_is_present = false;
+		dev_info(pcie->dev,
+			 "PCI Hotplug: <device removed>\n");
+	}
+	return IRQ_HANDLED;
+}
+
+static int iproc_pci_hp_gpio_irq_get(struct iproc_pcie *pcie)
+{
+	struct gpio_descs *hp_gpiod;
+	struct device *dev = pcie->dev;
+	int i;
+
+	hp_gpiod = devm_gpiod_get_array(dev, "prsnt", GPIOD_IN);
+	if (PTR_ERR(hp_gpiod) == -EPROBE_DEFER)
+		return -EPROBE_DEFER;
+
+	if (!IS_ERR(hp_gpiod) && (hp_gpiod->ndescs > 0)) {
+		for (i = 0; i < hp_gpiod->ndescs; ++i) {
+			gpiod_direction_input(hp_gpiod->desc[i]);
+			if (request_threaded_irq(gpiod_to_irq
+						 (hp_gpiod->desc[i]),
+						 NULL, iproc_pci_hotplug_thread,
+						 IRQF_TRIGGER_FALLING,
+						 "PCI-hotplug", pcie))
+				dev_err(dev,
+					"PCI hotplug prsnt: request irq failed\n");
+			}
+	}
+	pcie->ep_is_present = false;
+
+	return 0;
+}
+
 int iproc_pcie_setup(struct iproc_pcie *pcie, struct list_head *res)
 {
 	struct device *dev;
 	int ret;
 	void *sysdata;
-	struct pci_bus *child;
+	struct pci_bus *bus, *child;
 	struct pci_host_bridge *host = pci_host_bridge_from_priv(pcie);
+	bool link_not_active;
 
 	dev = pcie->dev;
 
@@ -1386,6 +1492,12 @@ int iproc_pcie_setup(struct iproc_pcie *pcie, struct list_head *res)
 		goto err_exit_phy;
 	}
 
+	if (pcie->enable_hotplug) {
+		ret = iproc_pci_hp_gpio_irq_get(pcie);
+		if (ret < 0)
+			return ret;
+	}
+
 	iproc_pcie_perst_ctrl(pcie, true);
 	iproc_pcie_perst_ctrl(pcie, false);
 
@@ -1408,8 +1520,16 @@ int iproc_pcie_setup(struct iproc_pcie *pcie, struct list_head *res)
 	sysdata = pcie;
 #endif
 
-	ret = iproc_pcie_check_link(pcie);
-	if (ret) {
+	link_not_active = iproc_pcie_check_link(pcie);
+	if (link_not_active && pcie->enable_hotplug) {
+		/*
+		 * When link is not active and PCI hotplug
+		 * is supported, do not turn off phy, let probe
+		 * go ahead.
+		 */
+		dev_err(dev, "no PCIe EP device detected\n");
+		iproc_pcie_perst_ctrl(pcie, true);
+	} else if (link_not_active) {
 		dev_err(dev, "no PCIe EP device detected\n");
 		goto err_power_off_phy;
 	}
@@ -1420,24 +1540,34 @@ int iproc_pcie_setup(struct iproc_pcie *pcie, struct list_head *res)
 		if (iproc_pcie_msi_enable(pcie))
 			dev_info(dev, "not using iProc MSI\n");
 
-	list_splice_init(res, &host->windows);
-	host->busnr = 0;
-	host->dev.parent = dev;
-	host->ops = &iproc_pcie_ops;
-	host->sysdata = sysdata;
-	host->map_irq = pcie->map_irq;
-	host->swizzle_irq = pci_common_swizzle;
+	if (!link_not_active) {
+		list_splice_init(res, &host->windows);
+		host->busnr = 0;
+		host->dev.parent = dev;
+		host->ops = &iproc_pcie_ops;
+		host->sysdata = sysdata;
+		host->map_irq = pcie->map_irq;
+		host->swizzle_irq = pci_common_swizzle;
+
+		ret = pci_scan_root_bus_bridge(host);
+		if (ret < 0) {
+			dev_err(dev, "failed to scan host: %d\n", ret);
+			goto err_power_off_phy;
+		}
 
-	ret = pci_scan_root_bus_bridge(host);
-	if (ret < 0) {
-		dev_err(dev, "failed to scan host: %d\n", ret);
-		goto err_power_off_phy;
+		pci_assign_unassigned_bus_resources(host->bus);
+		pcie->root_bus = host->bus;
+	} else {
+		bus = pci_create_root_bus(dev, 0,
+					  &iproc_pcie_ops, sysdata, res);
+		if (!bus) {
+			dev_err(dev, "unable to create PCI root bus\n");
+			ret = -ENOMEM;
+			goto err_power_off_phy;
+		}
+		pcie->root_bus = bus;
 	}
 
-	pci_assign_unassigned_bus_resources(host->bus);
-
-	pcie->root_bus = host->bus;
-
 	list_for_each_entry(child, &host->bus->children, node)
 		pcie_bus_configure_settings(child);
 
diff --git a/drivers/pci/host/pcie-iproc.h b/drivers/pci/host/pcie-iproc.h
index a6b55ce..e5d0cd4 100644
--- a/drivers/pci/host/pcie-iproc.h
+++ b/drivers/pci/host/pcie-iproc.h
@@ -77,6 +77,10 @@ struct iproc_pcie_ib {
  * @ib: inbound mapping related parameters
  * @ib_map: outbound mapping region related parameters
  *
+ * @enable_hotplug: indicates PCI hotplug feature is enabled
+ * @ep_is_present: when PCIe hotplug is enabled, this flag is used to
+ * indicate whether or not the endpoint device is present
+ *
  * @need_msi_steer: indicates additional configuration of the iProc PCIe
  * controller is required to steer MSI writes to external interrupt controller
  * @msi: MSI data
@@ -104,6 +108,9 @@ struct iproc_pcie {
 	struct iproc_pcie_ib ib;
 	const struct iproc_pcie_ib_map *ib_map;
 
+	bool enable_hotplug;
+	bool ep_is_present;
+
 	bool need_msi_steer;
 	struct iproc_msi *msi;
 };
-- 
1.9.1

[PATCH v5 3/3] PCI: iproc: Implement PCI hotplug support

[Oza Pawandeep]

This patch implements PCI hotplug support for iproc family chipsets.

iproc based SOC (e.g. Stingray) does not have hotplug controller
integrated.
Hence, standard PCI hotplug framework hooks can-not be used.
e.g. controlled power up/down of slot.

The mechanism, for e.g. Stingray has adopted for PCI hotplug is as follows:
PCI present lines are input to GPIOs depending on the type of
connector (x2, x4, x8).

GPIO array needs to be present if hotplug is supported.
HW implementation is SOC/Board specific, and also it depends on how
add-in card is designed
(e.g. how many present pins are implemented).

If x8 card is connected, then it might be possible that all the
3 present pins could go low, or at least one pin goes low.
If x4 card is connected, then it might be possible that 2 present
pins go low, or at least one pin goes low.

The implementation essentially takes care of following:
> Initializing hotplug irq thread.
> Detecting the endpoint device based on link state.
> Handling PERST and detecting the plugged devices.
> Ordered Hot plug-out, where User is expected
  to write 1 to /sys/bus/pci/devices/<pci_dev>/remove
> Handling spurious interrupt
> Handling multiple interrupts and makes sure that card is
  enumerated only once.

Signed-off-by: Oza Pawandeep <oza.oza@broadcom.com>
Reviewed-by: Ray Jui <ray.jui@broadcom.com>

diff --git a/drivers/pci/host/pcie-iproc-platform.c b/drivers/pci/host/pcie-iproc-platform.c
index a5073a9..6287a43 100644
--- a/drivers/pci/host/pcie-iproc-platform.c
+++ b/drivers/pci/host/pcie-iproc-platform.c
@@ -92,6 +92,9 @@ static int iproc_pcie_pltfm_probe(struct platform_device *pdev)
 		pcie->need_ob_cfg = true;
 	}
 
+	if (of_property_read_bool(np, "slot-pluggable"))
+		pcie->enable_hotplug = true;
+
 	/* PHY use is optional */
 	pcie->phy = devm_phy_get(dev, "pcie-phy");
 	if (IS_ERR(pcie->phy)) {
diff --git a/drivers/pci/host/pcie-iproc.c b/drivers/pci/host/pcie-iproc.c
index 8bd5e54..2b4d830 100644
--- a/drivers/pci/host/pcie-iproc.c
+++ b/drivers/pci/host/pcie-iproc.c
@@ -28,6 +28,7 @@
 #include <linux/of_irq.h>
 #include <linux/of_platform.h>
 #include <linux/phy/phy.h>
+#include <linux/gpio.h>
 
 #include "pcie-iproc.h"
 
@@ -65,6 +66,17 @@
 #define PCIE_DL_ACTIVE_SHIFT         2
 #define PCIE_DL_ACTIVE               BIT(PCIE_DL_ACTIVE_SHIFT)
 
+#define CFG_RC_LTSSM                 0x1cf8
+#define CFG_RC_PHY_CTL               0x1804
+#define CFG_RC_LTSSM_TIMEOUT         1000
+#define CFG_RC_LTSSM_STATE_MASK      0xff
+#define CFG_RC_LTSSM_STATE_L1        0x1
+
+#define CFG_RC_CLR_LTSSM_HIST_SHIFT  29
+#define CFG_RC_CLR_LTSSM_HIST_MASK   BIT(CFG_RC_CLR_LTSSM_HIST_SHIFT)
+#define CFG_RC_CLR_RECOV_HIST_SHIFT  31
+#define CFG_RC_CLR_RECOV_HIST_MASK   BIT(CFG_RC_CLR_RECOV_HIST_SHIFT)
+
 #define APB_ERR_EN_SHIFT             0
 #define APB_ERR_EN                   BIT(APB_ERR_EN_SHIFT)
 
@@ -1354,13 +1366,107 @@ static int iproc_pcie_rev_init(struct iproc_pcie *pcie)
 	return 0;
 }
 
+static bool iproc_pci_hp_check_ltssm(struct iproc_pcie *pcie)
+{
+	struct pci_bus *bus = pcie->root_bus;
+	u32 val, timeout = CFG_RC_LTSSM_TIMEOUT;
+
+	/* Clear LTSSM history. */
+	pci_bus_read_config_dword(pcie->root_bus, 0,
+				  CFG_RC_PHY_CTL, &val);
+	pci_bus_write_config_dword(bus, 0, CFG_RC_PHY_CTL,
+				   val | CFG_RC_CLR_RECOV_HIST_MASK |
+				   CFG_RC_CLR_LTSSM_HIST_MASK);
+	/* write back the origional value. */
+	pci_bus_write_config_dword(bus, 0, CFG_RC_PHY_CTL, val);
+
+	do {
+		pci_bus_read_config_dword(pcie->root_bus, 0,
+					  CFG_RC_LTSSM, &val);
+		/* check link state to see if link moved to L1 state. */
+		if ((val & CFG_RC_LTSSM_STATE_MASK) ==
+		     CFG_RC_LTSSM_STATE_L1)
+			return true;
+		timeout--;
+		usleep_range(500, 1000);
+	} while (timeout);
+
+	return false;
+}
+
+static irqreturn_t iproc_pci_hotplug_thread(int irq, void *data)
+{
+	struct iproc_pcie *pcie = data;
+	struct pci_bus *bus = pcie->root_bus, *child;
+	bool link_status;
+
+	iproc_pcie_perst_ctrl(pcie, true);
+	iproc_pcie_perst_ctrl(pcie, false);
+
+	link_status = iproc_pci_hp_check_ltssm(pcie);
+
+	if (link_status &&
+	    !iproc_pcie_check_link(pcie) &&
+	    !pcie->ep_is_present) {
+		pci_rescan_bus(bus);
+		list_for_each_entry(child, &bus->children, node)
+			pcie_bus_configure_settings(child);
+		pcie->ep_is_present = true;
+		dev_info(pcie->dev,
+			 "PCI Hotplug: <device detected and enumerated>\n");
+	} else if (link_status && pcie->ep_is_present)
+		/*
+		 * ep_is_present makes sure, enumuration done only once.
+		 * So it can handle spurious intrrupts, and also if we
+		 * get multiple interrupts for all the implemented pins,
+		 * we handle it only once.
+		 */
+		dev_info(pcie->dev,
+			 "PCI Hotplug: <device already present>\n");
+	else {
+		iproc_pcie_perst_ctrl(pcie, true);
+		pcie->ep_is_present = false;
+		dev_info(pcie->dev,
+			 "PCI Hotplug: <device removed>\n");
+	}
+	return IRQ_HANDLED;
+}
+
+static int iproc_pci_hp_gpio_irq_get(struct iproc_pcie *pcie)
+{
+	struct gpio_descs *hp_gpiod;
+	struct device *dev = pcie->dev;
+	int i;
+
+	hp_gpiod = devm_gpiod_get_array(dev, "prsnt", GPIOD_IN);
+	if (PTR_ERR(hp_gpiod) == -EPROBE_DEFER)
+		return -EPROBE_DEFER;
+
+	if (!IS_ERR(hp_gpiod) && (hp_gpiod->ndescs > 0)) {
+		for (i = 0; i < hp_gpiod->ndescs; ++i) {
+			gpiod_direction_input(hp_gpiod->desc[i]);
+			if (request_threaded_irq(gpiod_to_irq
+						 (hp_gpiod->desc[i]),
+						 NULL, iproc_pci_hotplug_thread,
+						 IRQF_TRIGGER_FALLING,
+						 "PCI-hotplug", pcie))
+				dev_err(dev,
+					"PCI hotplug prsnt: request irq failed\n");
+			}
+	}
+	pcie->ep_is_present = false;
+
+	return 0;
+}
+
 int iproc_pcie_setup(struct iproc_pcie *pcie, struct list_head *res)
 {
 	struct device *dev;
 	int ret;
 	void *sysdata;
-	struct pci_bus *child;
+	struct pci_bus *bus, *child;
 	struct pci_host_bridge *host = pci_host_bridge_from_priv(pcie);
+	bool link_not_active;
 
 	dev = pcie->dev;
 
@@ -1386,6 +1492,12 @@ int iproc_pcie_setup(struct iproc_pcie *pcie, struct list_head *res)
 		goto err_exit_phy;
 	}
 
+	if (pcie->enable_hotplug) {
+		ret = iproc_pci_hp_gpio_irq_get(pcie);
+		if (ret < 0)
+			return ret;
+	}
+
 	iproc_pcie_perst_ctrl(pcie, true);
 	iproc_pcie_perst_ctrl(pcie, false);
 
@@ -1408,8 +1520,16 @@ int iproc_pcie_setup(struct iproc_pcie *pcie, struct list_head *res)
 	sysdata = pcie;
 #endif
 
-	ret = iproc_pcie_check_link(pcie);
-	if (ret) {
+	link_not_active = iproc_pcie_check_link(pcie);
+	if (link_not_active && pcie->enable_hotplug) {
+		/*
+		 * When link is not active and PCI hotplug
+		 * is supported, do not turn off phy, let probe
+		 * go ahead.
+		 */
+		dev_err(dev, "no PCIe EP device detected\n");
+		iproc_pcie_perst_ctrl(pcie, true);
+	} else if (link_not_active) {
 		dev_err(dev, "no PCIe EP device detected\n");
 		goto err_power_off_phy;
 	}
@@ -1420,24 +1540,34 @@ int iproc_pcie_setup(struct iproc_pcie *pcie, struct list_head *res)
 		if (iproc_pcie_msi_enable(pcie))
 			dev_info(dev, "not using iProc MSI\n");
 
-	list_splice_init(res, &host->windows);
-	host->busnr = 0;
-	host->dev.parent = dev;
-	host->ops = &iproc_pcie_ops;
-	host->sysdata = sysdata;
-	host->map_irq = pcie->map_irq;
-	host->swizzle_irq = pci_common_swizzle;
+	if (!link_not_active) {
+		list_splice_init(res, &host->windows);
+		host->busnr = 0;
+		host->dev.parent = dev;
+		host->ops = &iproc_pcie_ops;
+		host->sysdata = sysdata;
+		host->map_irq = pcie->map_irq;
+		host->swizzle_irq = pci_common_swizzle;
+
+		ret = pci_scan_root_bus_bridge(host);
+		if (ret < 0) {
+			dev_err(dev, "failed to scan host: %d\n", ret);
+			goto err_power_off_phy;
+		}
 
-	ret = pci_scan_root_bus_bridge(host);
-	if (ret < 0) {
-		dev_err(dev, "failed to scan host: %d\n", ret);
-		goto err_power_off_phy;
+		pci_assign_unassigned_bus_resources(host->bus);
+		pcie->root_bus = host->bus;
+	} else {
+		bus = pci_create_root_bus(dev, 0,
+					  &iproc_pcie_ops, sysdata, res);
+		if (!bus) {
+			dev_err(dev, "unable to create PCI root bus\n");
+			ret = -ENOMEM;
+			goto err_power_off_phy;
+		}
+		pcie->root_bus = bus;
 	}
 
-	pci_assign_unassigned_bus_resources(host->bus);
-
-	pcie->root_bus = host->bus;
-
 	list_for_each_entry(child, &host->bus->children, node)
 		pcie_bus_configure_settings(child);
 
diff --git a/drivers/pci/host/pcie-iproc.h b/drivers/pci/host/pcie-iproc.h
index a6b55ce..e5d0cd4 100644
--- a/drivers/pci/host/pcie-iproc.h
+++ b/drivers/pci/host/pcie-iproc.h
@@ -77,6 +77,10 @@ struct iproc_pcie_ib {
  * @ib: inbound mapping related parameters
  * @ib_map: outbound mapping region related parameters
  *
+ * @enable_hotplug: indicates PCI hotplug feature is enabled
+ * @ep_is_present: when PCIe hotplug is enabled, this flag is used to
+ * indicate whether or not the endpoint device is present
+ *
  * @need_msi_steer: indicates additional configuration of the iProc PCIe
  * controller is required to steer MSI writes to external interrupt controller
  * @msi: MSI data
@@ -104,6 +108,9 @@ struct iproc_pcie {
 	struct iproc_pcie_ib ib;
 	const struct iproc_pcie_ib_map *ib_map;
 
+	bool enable_hotplug;
+	bool ep_is_present;
+
 	bool need_msi_steer;
 	struct iproc_msi *msi;
 };
-- 
1.9.1

[PATCH v5 3/3] PCI: iproc: Implement PCI hotplug support

[Oza Pawandeep]

This patch implements PCI hotplug support for iproc family chipsets.

iproc based SOC (e.g. Stingray) does not have hotplug controller
integrated.
Hence, standard PCI hotplug framework hooks can-not be used.
e.g. controlled power up/down of slot.

The mechanism, for e.g. Stingray has adopted for PCI hotplug is as follows:
PCI present lines are input to GPIOs depending on the type of
connector (x2, x4, x8).

GPIO array needs to be present if hotplug is supported.
HW implementation is SOC/Board specific, and also it depends on how
add-in card is designed
(e.g. how many present pins are implemented).

If x8 card is connected, then it might be possible that all the
3 present pins could go low, or at least one pin goes low.
If x4 card is connected, then it might be possible that 2 present
pins go low, or at least one pin goes low.

The implementation essentially takes care of following:
> Initializing hotplug irq thread.
> Detecting the endpoint device based on link state.
> Handling PERST and detecting the plugged devices.
> Ordered Hot plug-out, where User is expected
  to write 1 to /sys/bus/pci/devices/<pci_dev>/remove
> Handling spurious interrupt
> Handling multiple interrupts and makes sure that card is
  enumerated only once.

Signed-off-by: Oza Pawandeep <oza.oza@broadcom.com>
Reviewed-by: Ray Jui <ray.jui@broadcom.com>

diff --git a/drivers/pci/host/pcie-iproc-platform.c b/drivers/pci/host/pcie-iproc-platform.c
index a5073a9..6287a43 100644
--- a/drivers/pci/host/pcie-iproc-platform.c
+++ b/drivers/pci/host/pcie-iproc-platform.c
@@ -92,6 +92,9 @@ static int iproc_pcie_pltfm_probe(struct platform_device *pdev)
 		pcie->need_ob_cfg = true;
 	}
 
+	if (of_property_read_bool(np, "slot-pluggable"))
+		pcie->enable_hotplug = true;
+
 	/* PHY use is optional */
 	pcie->phy = devm_phy_get(dev, "pcie-phy");
 	if (IS_ERR(pcie->phy)) {
diff --git a/drivers/pci/host/pcie-iproc.c b/drivers/pci/host/pcie-iproc.c
index 8bd5e54..2b4d830 100644
--- a/drivers/pci/host/pcie-iproc.c
+++ b/drivers/pci/host/pcie-iproc.c
@@ -28,6 +28,7 @@
 #include <linux/of_irq.h>
 #include <linux/of_platform.h>
 #include <linux/phy/phy.h>
+#include <linux/gpio.h>
 
 #include "pcie-iproc.h"
 
@@ -65,6 +66,17 @@
 #define PCIE_DL_ACTIVE_SHIFT         2
 #define PCIE_DL_ACTIVE               BIT(PCIE_DL_ACTIVE_SHIFT)
 
+#define CFG_RC_LTSSM                 0x1cf8
+#define CFG_RC_PHY_CTL               0x1804
+#define CFG_RC_LTSSM_TIMEOUT         1000
+#define CFG_RC_LTSSM_STATE_MASK      0xff
+#define CFG_RC_LTSSM_STATE_L1        0x1
+
+#define CFG_RC_CLR_LTSSM_HIST_SHIFT  29
+#define CFG_RC_CLR_LTSSM_HIST_MASK   BIT(CFG_RC_CLR_LTSSM_HIST_SHIFT)
+#define CFG_RC_CLR_RECOV_HIST_SHIFT  31
+#define CFG_RC_CLR_RECOV_HIST_MASK   BIT(CFG_RC_CLR_RECOV_HIST_SHIFT)
+
 #define APB_ERR_EN_SHIFT             0
 #define APB_ERR_EN                   BIT(APB_ERR_EN_SHIFT)
 
@@ -1354,13 +1366,107 @@ static int iproc_pcie_rev_init(struct iproc_pcie *pcie)
 	return 0;
 }
 
+static bool iproc_pci_hp_check_ltssm(struct iproc_pcie *pcie)
+{
+	struct pci_bus *bus = pcie->root_bus;
+	u32 val, timeout = CFG_RC_LTSSM_TIMEOUT;
+
+	/* Clear LTSSM history. */
+	pci_bus_read_config_dword(pcie->root_bus, 0,
+				  CFG_RC_PHY_CTL, &val);
+	pci_bus_write_config_dword(bus, 0, CFG_RC_PHY_CTL,
+				   val | CFG_RC_CLR_RECOV_HIST_MASK |
+				   CFG_RC_CLR_LTSSM_HIST_MASK);
+	/* write back the origional value. */
+	pci_bus_write_config_dword(bus, 0, CFG_RC_PHY_CTL, val);
+
+	do {
+		pci_bus_read_config_dword(pcie->root_bus, 0,
+					  CFG_RC_LTSSM, &val);
+		/* check link state to see if link moved to L1 state. */
+		if ((val & CFG_RC_LTSSM_STATE_MASK) ==
+		     CFG_RC_LTSSM_STATE_L1)
+			return true;
+		timeout--;
+		usleep_range(500, 1000);
+	} while (timeout);
+
+	return false;
+}
+
+static irqreturn_t iproc_pci_hotplug_thread(int irq, void *data)
+{
+	struct iproc_pcie *pcie = data;
+	struct pci_bus *bus = pcie->root_bus, *child;
+	bool link_status;
+
+	iproc_pcie_perst_ctrl(pcie, true);
+	iproc_pcie_perst_ctrl(pcie, false);
+
+	link_status = iproc_pci_hp_check_ltssm(pcie);
+
+	if (link_status &&
+	    !iproc_pcie_check_link(pcie) &&
+	    !pcie->ep_is_present) {
+		pci_rescan_bus(bus);
+		list_for_each_entry(child, &bus->children, node)
+			pcie_bus_configure_settings(child);
+		pcie->ep_is_present = true;
+		dev_info(pcie->dev,
+			 "PCI Hotplug: <device detected and enumerated>\n");
+	} else if (link_status && pcie->ep_is_present)
+		/*
+		 * ep_is_present makes sure, enumuration done only once.
+		 * So it can handle spurious intrrupts, and also if we
+		 * get multiple interrupts for all the implemented pins,
+		 * we handle it only once.
+		 */
+		dev_info(pcie->dev,
+			 "PCI Hotplug: <device already present>\n");
+	else {
+		iproc_pcie_perst_ctrl(pcie, true);
+		pcie->ep_is_present = false;
+		dev_info(pcie->dev,
+			 "PCI Hotplug: <device removed>\n");
+	}
+	return IRQ_HANDLED;
+}
+
+static int iproc_pci_hp_gpio_irq_get(struct iproc_pcie *pcie)
+{
+	struct gpio_descs *hp_gpiod;
+	struct device *dev = pcie->dev;
+	int i;
+
+	hp_gpiod = devm_gpiod_get_array(dev, "prsnt", GPIOD_IN);
+	if (PTR_ERR(hp_gpiod) == -EPROBE_DEFER)
+		return -EPROBE_DEFER;
+
+	if (!IS_ERR(hp_gpiod) && (hp_gpiod->ndescs > 0)) {
+		for (i = 0; i < hp_gpiod->ndescs; ++i) {
+			gpiod_direction_input(hp_gpiod->desc[i]);
+			if (request_threaded_irq(gpiod_to_irq
+						 (hp_gpiod->desc[i]),
+						 NULL, iproc_pci_hotplug_thread,
+						 IRQF_TRIGGER_FALLING,
+						 "PCI-hotplug", pcie))
+				dev_err(dev,
+					"PCI hotplug prsnt: request irq failed\n");
+			}
+	}
+	pcie->ep_is_present = false;
+
+	return 0;
+}
+
 int iproc_pcie_setup(struct iproc_pcie *pcie, struct list_head *res)
 {
 	struct device *dev;
 	int ret;
 	void *sysdata;
-	struct pci_bus *child;
+	struct pci_bus *bus, *child;
 	struct pci_host_bridge *host = pci_host_bridge_from_priv(pcie);
+	bool link_not_active;
 
 	dev = pcie->dev;
 
@@ -1386,6 +1492,12 @@ int iproc_pcie_setup(struct iproc_pcie *pcie, struct list_head *res)
 		goto err_exit_phy;
 	}
 
+	if (pcie->enable_hotplug) {
+		ret = iproc_pci_hp_gpio_irq_get(pcie);
+		if (ret < 0)
+			return ret;
+	}
+
 	iproc_pcie_perst_ctrl(pcie, true);
 	iproc_pcie_perst_ctrl(pcie, false);
 
@@ -1408,8 +1520,16 @@ int iproc_pcie_setup(struct iproc_pcie *pcie, struct list_head *res)
 	sysdata = pcie;
 #endif
 
-	ret = iproc_pcie_check_link(pcie);
-	if (ret) {
+	link_not_active = iproc_pcie_check_link(pcie);
+	if (link_not_active && pcie->enable_hotplug) {
+		/*
+		 * When link is not active and PCI hotplug
+		 * is supported, do not turn off phy, let probe
+		 * go ahead.
+		 */
+		dev_err(dev, "no PCIe EP device detected\n");
+		iproc_pcie_perst_ctrl(pcie, true);
+	} else if (link_not_active) {
 		dev_err(dev, "no PCIe EP device detected\n");
 		goto err_power_off_phy;
 	}
@@ -1420,24 +1540,34 @@ int iproc_pcie_setup(struct iproc_pcie *pcie, struct list_head *res)
 		if (iproc_pcie_msi_enable(pcie))
 			dev_info(dev, "not using iProc MSI\n");
 
-	list_splice_init(res, &host->windows);
-	host->busnr = 0;
-	host->dev.parent = dev;
-	host->ops = &iproc_pcie_ops;
-	host->sysdata = sysdata;
-	host->map_irq = pcie->map_irq;
-	host->swizzle_irq = pci_common_swizzle;
+	if (!link_not_active) {
+		list_splice_init(res, &host->windows);
+		host->busnr = 0;
+		host->dev.parent = dev;
+		host->ops = &iproc_pcie_ops;
+		host->sysdata = sysdata;
+		host->map_irq = pcie->map_irq;
+		host->swizzle_irq = pci_common_swizzle;
+
+		ret = pci_scan_root_bus_bridge(host);
+		if (ret < 0) {
+			dev_err(dev, "failed to scan host: %d\n", ret);
+			goto err_power_off_phy;
+		}
 
-	ret = pci_scan_root_bus_bridge(host);
-	if (ret < 0) {
-		dev_err(dev, "failed to scan host: %d\n", ret);
-		goto err_power_off_phy;
+		pci_assign_unassigned_bus_resources(host->bus);
+		pcie->root_bus = host->bus;
+	} else {
+		bus = pci_create_root_bus(dev, 0,
+					  &iproc_pcie_ops, sysdata, res);
+		if (!bus) {
+			dev_err(dev, "unable to create PCI root bus\n");
+			ret = -ENOMEM;
+			goto err_power_off_phy;
+		}
+		pcie->root_bus = bus;
 	}
 
-	pci_assign_unassigned_bus_resources(host->bus);
-
-	pcie->root_bus = host->bus;
-
 	list_for_each_entry(child, &host->bus->children, node)
 		pcie_bus_configure_settings(child);
 
diff --git a/drivers/pci/host/pcie-iproc.h b/drivers/pci/host/pcie-iproc.h
index a6b55ce..e5d0cd4 100644
--- a/drivers/pci/host/pcie-iproc.h
+++ b/drivers/pci/host/pcie-iproc.h
@@ -77,6 +77,10 @@ struct iproc_pcie_ib {
  * @ib: inbound mapping related parameters
  * @ib_map: outbound mapping region related parameters
  *
+ * @enable_hotplug: indicates PCI hotplug feature is enabled
+ * @ep_is_present: when PCIe hotplug is enabled, this flag is used to
+ * indicate whether or not the endpoint device is present
+ *
  * @need_msi_steer: indicates additional configuration of the iProc PCIe
  * controller is required to steer MSI writes to external interrupt controller
  * @msi: MSI data
@@ -104,6 +108,9 @@ struct iproc_pcie {
 	struct iproc_pcie_ib ib;
 	const struct iproc_pcie_ib_map *ib_map;
 
+	bool enable_hotplug;
+	bool ep_is_present;
+
 	bool need_msi_steer;
 	struct iproc_msi *msi;
 };
-- 
1.9.1