[PATCH v3 0/5] Add MediaTek PMIC keys support

[PATCH v3 0/5] Add MediaTek PMIC keys support

[Chen Zhong]

MediaTek PMIC are multi-function devices that can handle key interrupts,
typically there are two keys attached to PMIC, which called pwrkey
and homekey. PWRKEY usually used to wake up system from sleep. Homekey
can used as volume down key due to board design. Long press keys can
shutdown PMIC, the mode can be choose to be one key only or two keys
together.
This series add support for key functions for MediaTek PMIC MT6397/MT6323.

Chen Zhong (5):
  mfd: mt6397: create irq mappings in mfd core driver
  dt-bindings: input: Add document bindings for mtk-pmic-keys
  dt-bindings: mfd: Add bindings for the keys as subnode of PMIC
  input: Add MediaTek PMIC keys support
  mfd: mt6397: Add PMIC keys support to MT6397 driver

 .../devicetree/bindings/input/mtk-pmic-keys.txt    |  38 +++
 Documentation/devicetree/bindings/mfd/mt6397.txt   |   6 +
 drivers/input/keyboard/Kconfig                     |   9 +
 drivers/input/keyboard/Makefile                    |   1 +
 drivers/input/keyboard/mtk-pmic-keys.c             | 308 +++++++++++++++++++++
 drivers/mfd/mt6397-core.c                          |  26 +-
 drivers/rtc/rtc-mt6397.c                           |   7 +-
 7 files changed, 388 insertions(+), 7 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/input/mtk-pmic-keys.txt
 create mode 100644 drivers/input/keyboard/mtk-pmic-keys.c

-- 
1.9.1

[PATCH v3 0/5] Add MediaTek PMIC keys support

[Chen Zhong]

MediaTek PMIC are multi-function devices that can handle key interrupts,
typically there are two keys attached to PMIC, which called pwrkey
and homekey. PWRKEY usually used to wake up system from sleep. Homekey
can used as volume down key due to board design. Long press keys can
shutdown PMIC, the mode can be choose to be one key only or two keys
together.
This series add support for key functions for MediaTek PMIC MT6397/MT6323.

Chen Zhong (5):
  mfd: mt6397: create irq mappings in mfd core driver
  dt-bindings: input: Add document bindings for mtk-pmic-keys
  dt-bindings: mfd: Add bindings for the keys as subnode of PMIC
  input: Add MediaTek PMIC keys support
  mfd: mt6397: Add PMIC keys support to MT6397 driver

 .../devicetree/bindings/input/mtk-pmic-keys.txt    |  38 +++
 Documentation/devicetree/bindings/mfd/mt6397.txt   |   6 +
 drivers/input/keyboard/Kconfig                     |   9 +
 drivers/input/keyboard/Makefile                    |   1 +
 drivers/input/keyboard/mtk-pmic-keys.c             | 308 +++++++++++++++++++++
 drivers/mfd/mt6397-core.c                          |  26 +-
 drivers/rtc/rtc-mt6397.c                           |   7 +-
 7 files changed, 388 insertions(+), 7 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/input/mtk-pmic-keys.txt
 create mode 100644 drivers/input/keyboard/mtk-pmic-keys.c

-- 
1.9.1

[PATCH v3 0/5] Add MediaTek PMIC keys support

[Chen Zhong]

MediaTek PMIC are multi-function devices that can handle key interrupts,
typically there are two keys attached to PMIC, which called pwrkey
and homekey. PWRKEY usually used to wake up system from sleep. Homekey
can used as volume down key due to board design. Long press keys can
shutdown PMIC, the mode can be choose to be one key only or two keys
together.
This series add support for key functions for MediaTek PMIC MT6397/MT6323.

Chen Zhong (5):
  mfd: mt6397: create irq mappings in mfd core driver
  dt-bindings: input: Add document bindings for mtk-pmic-keys
  dt-bindings: mfd: Add bindings for the keys as subnode of PMIC
  input: Add MediaTek PMIC keys support
  mfd: mt6397: Add PMIC keys support to MT6397 driver

 .../devicetree/bindings/input/mtk-pmic-keys.txt    |  38 +++
 Documentation/devicetree/bindings/mfd/mt6397.txt   |   6 +
 drivers/input/keyboard/Kconfig                     |   9 +
 drivers/input/keyboard/Makefile                    |   1 +
 drivers/input/keyboard/mtk-pmic-keys.c             | 308 +++++++++++++++++++++
 drivers/mfd/mt6397-core.c                          |  26 +-
 drivers/rtc/rtc-mt6397.c                           |   7 +-
 7 files changed, 388 insertions(+), 7 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/input/mtk-pmic-keys.txt
 create mode 100644 drivers/input/keyboard/mtk-pmic-keys.c

-- 
1.9.1

[PATCH v3 1/5] mfd: mt6397: create irq mappings in mfd core driver

[Chen Zhong]

The core driver should create and manage irq mappings instead of
leaf drivers. This patch change to pass irq domain to
devm_mfd_add_devices() and it will create mapping for irq resources
automatically. And remove irq mapping in rtc driver since this has
been done in core driver.

Acked-for-MFD-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Chen Zhong <chen.zhong@mediatek.com>
---
 drivers/mfd/mt6397-core.c |    4 ++--
 drivers/rtc/rtc-mt6397.c  |    7 +++----
 2 files changed, 5 insertions(+), 6 deletions(-)

diff --git a/drivers/mfd/mt6397-core.c b/drivers/mfd/mt6397-core.c
index 04a601f..6546d7f 100644
--- a/drivers/mfd/mt6397-core.c
+++ b/drivers/mfd/mt6397-core.c
@@ -289,7 +289,7 @@ static int mt6397_probe(struct platform_device *pdev)
 
 		ret = devm_mfd_add_devices(&pdev->dev, -1, mt6323_devs,
 					   ARRAY_SIZE(mt6323_devs), NULL,
-					   0, NULL);
+					   0, pmic->irq_domain);
 		break;
 
 	case MT6397_CID_CODE:
@@ -304,7 +304,7 @@ static int mt6397_probe(struct platform_device *pdev)
 
 		ret = devm_mfd_add_devices(&pdev->dev, -1, mt6397_devs,
 					   ARRAY_SIZE(mt6397_devs), NULL,
-					   0, NULL);
+					   0, pmic->irq_domain);
 		break;
 
 	default:
diff --git a/drivers/rtc/rtc-mt6397.c b/drivers/rtc/rtc-mt6397.c
index 1a61fa5..385f830 100644
--- a/drivers/rtc/rtc-mt6397.c
+++ b/drivers/rtc/rtc-mt6397.c
@@ -322,10 +322,9 @@ static int mtk_rtc_probe(struct platform_device *pdev)
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	rtc->addr_base = res->start;
 
-	res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
-	rtc->irq = irq_create_mapping(mt6397_chip->irq_domain, res->start);
-	if (rtc->irq <= 0)
-		return -EINVAL;
+	rtc->irq = platform_get_irq(pdev, 0);
+	if (rtc->irq < 0)
+		return rtc->irq;
 
 	rtc->regmap = mt6397_chip->regmap;
 	rtc->dev = &pdev->dev;
-- 
1.7.9.5

[PATCH v3 1/5] mfd: mt6397: create irq mappings in mfd core driver

[Chen Zhong]

The core driver should create and manage irq mappings instead of
leaf drivers. This patch change to pass irq domain to
devm_mfd_add_devices() and it will create mapping for irq resources
automatically. And remove irq mapping in rtc driver since this has
been done in core driver.

Acked-for-MFD-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Chen Zhong <chen.zhong@mediatek.com>
---
 drivers/mfd/mt6397-core.c |    4 ++--
 drivers/rtc/rtc-mt6397.c  |    7 +++----
 2 files changed, 5 insertions(+), 6 deletions(-)

diff --git a/drivers/mfd/mt6397-core.c b/drivers/mfd/mt6397-core.c
index 04a601f..6546d7f 100644
--- a/drivers/mfd/mt6397-core.c
+++ b/drivers/mfd/mt6397-core.c
@@ -289,7 +289,7 @@ static int mt6397_probe(struct platform_device *pdev)
 
 		ret = devm_mfd_add_devices(&pdev->dev, -1, mt6323_devs,
 					   ARRAY_SIZE(mt6323_devs), NULL,
-					   0, NULL);
+					   0, pmic->irq_domain);
 		break;
 
 	case MT6397_CID_CODE:
@@ -304,7 +304,7 @@ static int mt6397_probe(struct platform_device *pdev)
 
 		ret = devm_mfd_add_devices(&pdev->dev, -1, mt6397_devs,
 					   ARRAY_SIZE(mt6397_devs), NULL,
-					   0, NULL);
+					   0, pmic->irq_domain);
 		break;
 
 	default:
diff --git a/drivers/rtc/rtc-mt6397.c b/drivers/rtc/rtc-mt6397.c
index 1a61fa5..385f830 100644
--- a/drivers/rtc/rtc-mt6397.c
+++ b/drivers/rtc/rtc-mt6397.c
@@ -322,10 +322,9 @@ static int mtk_rtc_probe(struct platform_device *pdev)
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	rtc->addr_base = res->start;
 
-	res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
-	rtc->irq = irq_create_mapping(mt6397_chip->irq_domain, res->start);
-	if (rtc->irq <= 0)
-		return -EINVAL;
+	rtc->irq = platform_get_irq(pdev, 0);
+	if (rtc->irq < 0)
+		return rtc->irq;
 
 	rtc->regmap = mt6397_chip->regmap;
 	rtc->dev = &pdev->dev;
-- 
1.7.9.5

[PATCH v3 1/5] mfd: mt6397: create irq mappings in mfd core driver

[Chen Zhong]

The core driver should create and manage irq mappings instead of
leaf drivers. This patch change to pass irq domain to
devm_mfd_add_devices() and it will create mapping for irq resources
automatically. And remove irq mapping in rtc driver since this has
been done in core driver.

Acked-for-MFD-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Chen Zhong <chen.zhong@mediatek.com>
---
 drivers/mfd/mt6397-core.c |    4 ++--
 drivers/rtc/rtc-mt6397.c  |    7 +++----
 2 files changed, 5 insertions(+), 6 deletions(-)

diff --git a/drivers/mfd/mt6397-core.c b/drivers/mfd/mt6397-core.c
index 04a601f..6546d7f 100644
--- a/drivers/mfd/mt6397-core.c
+++ b/drivers/mfd/mt6397-core.c
@@ -289,7 +289,7 @@ static int mt6397_probe(struct platform_device *pdev)
 
 		ret = devm_mfd_add_devices(&pdev->dev, -1, mt6323_devs,
 					   ARRAY_SIZE(mt6323_devs), NULL,
-					   0, NULL);
+					   0, pmic->irq_domain);
 		break;
 
 	case MT6397_CID_CODE:
@@ -304,7 +304,7 @@ static int mt6397_probe(struct platform_device *pdev)
 
 		ret = devm_mfd_add_devices(&pdev->dev, -1, mt6397_devs,
 					   ARRAY_SIZE(mt6397_devs), NULL,
-					   0, NULL);
+					   0, pmic->irq_domain);
 		break;
 
 	default:
diff --git a/drivers/rtc/rtc-mt6397.c b/drivers/rtc/rtc-mt6397.c
index 1a61fa5..385f830 100644
--- a/drivers/rtc/rtc-mt6397.c
+++ b/drivers/rtc/rtc-mt6397.c
@@ -322,10 +322,9 @@ static int mtk_rtc_probe(struct platform_device *pdev)
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	rtc->addr_base = res->start;
 
-	res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
-	rtc->irq = irq_create_mapping(mt6397_chip->irq_domain, res->start);
-	if (rtc->irq <= 0)
-		return -EINVAL;
+	rtc->irq = platform_get_irq(pdev, 0);
+	if (rtc->irq < 0)
+		return rtc->irq;
 
 	rtc->regmap = mt6397_chip->regmap;
 	rtc->dev = &pdev->dev;
-- 
1.7.9.5

[PATCH v3 2/5] dt-bindings: input: Add document bindings for mtk-pmic-keys

[Chen Zhong]

This patch adds the device tree binding documentation for the MediaTek
pmic keys found on PMIC MT6397/MT6323.

Signed-off-by: Chen Zhong <chen.zhong@mediatek.com>
---
 .../devicetree/bindings/input/mtk-pmic-keys.txt    |   38 ++++++++++++++++++++
 1 file changed, 38 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/input/mtk-pmic-keys.txt

diff --git a/Documentation/devicetree/bindings/input/mtk-pmic-keys.txt b/Documentation/devicetree/bindings/input/mtk-pmic-keys.txt
new file mode 100644
index 0000000..100ec44
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/mtk-pmic-keys.txt
@@ -0,0 +1,38 @@
+MediaTek MT6397/MT6323 PMIC Keys Device Driver
+
+There are two key functions provided by MT6397/MT6323 PMIC, pwrkey
+and homekey. The key functions are defined as the subnode of the function
+node provided by MT6397/MT6323 PMIC that is being defined as one kind
+of Muti-Function Device (MFD)
+
+For MT6397/MT6323 MFD bindings see:
+Documentation/devicetree/bindings/mfd/mt6397.txt
+
+Required properties:
+- compatible: "mediatek,mt6397-keys" or "mediatek,mt6323-keys"
+- linux,keycodes: Specifies the numeric keycode values to
+	be used for reporting keys presses. The array can
+	contain up to 2 entries.
+
+Optional Properties:
+- wakeup-source: each key can be used as a wakeup source.
+- mediatek,long-press-mode: Long press key shutdown setting, 1 for
+	pwrkey only, 2 for pwrkey/homekey together, others for disabled.
+- debounce-interval: Long press key shutdown debouncing interval time
+	in seconds. 0/1/2/3 for 8/11/14/5 seconds. If not specified defaults to 0.
+
+Example:
+
+	pmic: mt6397 {
+		compatible = "mediatek,mt6397";
+
+		...
+
+		mt6397keys: mt6397keys {
+			compatible = "mediatek,mt6397-keys";
+			linux,keycodes = <KEY_POWER>, <KEY_VOLUMEDOWN>;
+			wakeup-source = <1>, <0>;
+			mediatek,long-press-mode = <1>;
+			debounce-interval = <0>;
+		};
+	};
-- 
1.7.9.5

[PATCH v3 2/5] dt-bindings: input: Add document bindings for mtk-pmic-keys

[Chen Zhong]

This patch adds the device tree binding documentation for the MediaTek
pmic keys found on PMIC MT6397/MT6323.

Signed-off-by: Chen Zhong <chen.zhong@mediatek.com>
---
 .../devicetree/bindings/input/mtk-pmic-keys.txt    |   38 ++++++++++++++++++++
 1 file changed, 38 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/input/mtk-pmic-keys.txt

diff --git a/Documentation/devicetree/bindings/input/mtk-pmic-keys.txt b/Documentation/devicetree/bindings/input/mtk-pmic-keys.txt
new file mode 100644
index 0000000..100ec44
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/mtk-pmic-keys.txt
@@ -0,0 +1,38 @@
+MediaTek MT6397/MT6323 PMIC Keys Device Driver
+
+There are two key functions provided by MT6397/MT6323 PMIC, pwrkey
+and homekey. The key functions are defined as the subnode of the function
+node provided by MT6397/MT6323 PMIC that is being defined as one kind
+of Muti-Function Device (MFD)
+
+For MT6397/MT6323 MFD bindings see:
+Documentation/devicetree/bindings/mfd/mt6397.txt
+
+Required properties:
+- compatible: "mediatek,mt6397-keys" or "mediatek,mt6323-keys"
+- linux,keycodes: Specifies the numeric keycode values to
+	be used for reporting keys presses. The array can
+	contain up to 2 entries.
+
+Optional Properties:
+- wakeup-source: each key can be used as a wakeup source.
+- mediatek,long-press-mode: Long press key shutdown setting, 1 for
+	pwrkey only, 2 for pwrkey/homekey together, others for disabled.
+- debounce-interval: Long press key shutdown debouncing interval time
+	in seconds. 0/1/2/3 for 8/11/14/5 seconds. If not specified defaults to 0.
+
+Example:
+
+	pmic: mt6397 {
+		compatible = "mediatek,mt6397";
+
+		...
+
+		mt6397keys: mt6397keys {
+			compatible = "mediatek,mt6397-keys";
+			linux,keycodes = <KEY_POWER>, <KEY_VOLUMEDOWN>;
+			wakeup-source = <1>, <0>;
+			mediatek,long-press-mode = <1>;
+			debounce-interval = <0>;
+		};
+	};
-- 
1.7.9.5

[PATCH v3 2/5] dt-bindings: input: Add document bindings for mtk-pmic-keys

[Chen Zhong]

This patch adds the device tree binding documentation for the MediaTek
pmic keys found on PMIC MT6397/MT6323.

Signed-off-by: Chen Zhong <chen.zhong@mediatek.com>
---
 .../devicetree/bindings/input/mtk-pmic-keys.txt    |   38 ++++++++++++++++++++
 1 file changed, 38 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/input/mtk-pmic-keys.txt

diff --git a/Documentation/devicetree/bindings/input/mtk-pmic-keys.txt b/Documentation/devicetree/bindings/input/mtk-pmic-keys.txt
new file mode 100644
index 0000000..100ec44
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/mtk-pmic-keys.txt
@@ -0,0 +1,38 @@
+MediaTek MT6397/MT6323 PMIC Keys Device Driver
+
+There are two key functions provided by MT6397/MT6323 PMIC, pwrkey
+and homekey. The key functions are defined as the subnode of the function
+node provided by MT6397/MT6323 PMIC that is being defined as one kind
+of Muti-Function Device (MFD)
+
+For MT6397/MT6323 MFD bindings see:
+Documentation/devicetree/bindings/mfd/mt6397.txt
+
+Required properties:
+- compatible: "mediatek,mt6397-keys" or "mediatek,mt6323-keys"
+- linux,keycodes: Specifies the numeric keycode values to
+	be used for reporting keys presses. The array can
+	contain up to 2 entries.
+
+Optional Properties:
+- wakeup-source: each key can be used as a wakeup source.
+- mediatek,long-press-mode: Long press key shutdown setting, 1 for
+	pwrkey only, 2 for pwrkey/homekey together, others for disabled.
+- debounce-interval: Long press key shutdown debouncing interval time
+	in seconds. 0/1/2/3 for 8/11/14/5 seconds. If not specified defaults to 0.
+
+Example:
+
+	pmic: mt6397 {
+		compatible = "mediatek,mt6397";
+
+		...
+
+		mt6397keys: mt6397keys {
+			compatible = "mediatek,mt6397-keys";
+			linux,keycodes = <KEY_POWER>, <KEY_VOLUMEDOWN>;
+			wakeup-source = <1>, <0>;
+			mediatek,long-press-mode = <1>;
+			debounce-interval = <0>;
+		};
+	};
-- 
1.7.9.5

[PATCH v3 3/5] dt-bindings: mfd: Add bindings for the keys as subnode of PMIC

[Chen Zhong]

This patch adds documentation for device tree bindings for keys support
as the subnode of MT6397/MT6323 PMIC.

Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Chen Zhong <chen.zhong@mediatek.com>
---
 Documentation/devicetree/bindings/mfd/mt6397.txt |    6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/Documentation/devicetree/bindings/mfd/mt6397.txt b/Documentation/devicetree/bindings/mfd/mt6397.txt
index 522a3bb..d1df77f 100644
--- a/Documentation/devicetree/bindings/mfd/mt6397.txt
+++ b/Documentation/devicetree/bindings/mfd/mt6397.txt
@@ -7,6 +7,7 @@ MT6397/MT6323 is a multifunction device with the following sub modules:
 - GPIO
 - Clock
 - LED
+- Keys
 
 It is interfaced to host controller using SPI interface by a proprietary hardware
 called PMIC wrapper or pwrap. MT6397/MT6323 MFD is a child device of pwrap.
@@ -40,6 +41,11 @@ Optional subnodes:
 		- compatible: "mediatek,mt6323-led"
 	see Documentation/devicetree/bindings/leds/leds-mt6323.txt
 
+- keys
+	Required properties:
+		- compatible: "mediatek,mt6397-keys" or "mediatek,mt6323-keys"
+	see Documentation/devicetree/bindings/input/mtk-pmic-keys.txt
+
 Example:
 	pwrap: pwrap@1000f000 {
 		compatible = "mediatek,mt8135-pwrap";
-- 
1.7.9.5

[PATCH v3 3/5] dt-bindings: mfd: Add bindings for the keys as subnode of PMIC

[Chen Zhong]

This patch adds documentation for device tree bindings for keys support
as the subnode of MT6397/MT6323 PMIC.

Acked-by: Rob Herring <robh-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
Signed-off-by: Chen Zhong <chen.zhong-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>
---
 Documentation/devicetree/bindings/mfd/mt6397.txt |    6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/Documentation/devicetree/bindings/mfd/mt6397.txt b/Documentation/devicetree/bindings/mfd/mt6397.txt
index 522a3bb..d1df77f 100644
--- a/Documentation/devicetree/bindings/mfd/mt6397.txt
+++ b/Documentation/devicetree/bindings/mfd/mt6397.txt
@@ -7,6 +7,7 @@ MT6397/MT6323 is a multifunction device with the following sub modules:
 - GPIO
 - Clock
 - LED
+- Keys
 
 It is interfaced to host controller using SPI interface by a proprietary hardware
 called PMIC wrapper or pwrap. MT6397/MT6323 MFD is a child device of pwrap.
@@ -40,6 +41,11 @@ Optional subnodes:
 		- compatible: "mediatek,mt6323-led"
 	see Documentation/devicetree/bindings/leds/leds-mt6323.txt
 
+- keys
+	Required properties:
+		- compatible: "mediatek,mt6397-keys" or "mediatek,mt6323-keys"
+	see Documentation/devicetree/bindings/input/mtk-pmic-keys.txt
+
 Example:
 	pwrap: pwrap@1000f000 {
 		compatible = "mediatek,mt8135-pwrap";
-- 
1.7.9.5

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH v3 3/5] dt-bindings: mfd: Add bindings for the keys as subnode of PMIC

[Chen Zhong]

This patch adds documentation for device tree bindings for keys support
as the subnode of MT6397/MT6323 PMIC.

Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Chen Zhong <chen.zhong@mediatek.com>
---
 Documentation/devicetree/bindings/mfd/mt6397.txt |    6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/Documentation/devicetree/bindings/mfd/mt6397.txt b/Documentation/devicetree/bindings/mfd/mt6397.txt
index 522a3bb..d1df77f 100644
--- a/Documentation/devicetree/bindings/mfd/mt6397.txt
+++ b/Documentation/devicetree/bindings/mfd/mt6397.txt
@@ -7,6 +7,7 @@ MT6397/MT6323 is a multifunction device with the following sub modules:
 - GPIO
 - Clock
 - LED
+- Keys
 
 It is interfaced to host controller using SPI interface by a proprietary hardware
 called PMIC wrapper or pwrap. MT6397/MT6323 MFD is a child device of pwrap.
@@ -40,6 +41,11 @@ Optional subnodes:
 		- compatible: "mediatek,mt6323-led"
 	see Documentation/devicetree/bindings/leds/leds-mt6323.txt
 
+- keys
+	Required properties:
+		- compatible: "mediatek,mt6397-keys" or "mediatek,mt6323-keys"
+	see Documentation/devicetree/bindings/input/mtk-pmic-keys.txt
+
 Example:
 	pwrap: pwrap at 1000f000 {
 		compatible = "mediatek,mt8135-pwrap";
-- 
1.7.9.5

[PATCH v3 4/5] input: Add MediaTek PMIC keys support

[Chen Zhong]

This patch add support to handle MediaTek PMIC MT6397/MT6323 key
interrupts including pwrkey and homekey, also add setting for
long press key shutdown behavior.

Signed-off-by: Chen Zhong <chen.zhong@mediatek.com>
---
 drivers/input/keyboard/Kconfig         |    9 +
 drivers/input/keyboard/Makefile        |    1 +
 drivers/input/keyboard/mtk-pmic-keys.c |  308 ++++++++++++++++++++++++++++++++
 3 files changed, 318 insertions(+)
 create mode 100644 drivers/input/keyboard/mtk-pmic-keys.c

diff --git a/drivers/input/keyboard/Kconfig b/drivers/input/keyboard/Kconfig
index 4c4ab1c..bd4e20a 100644
--- a/drivers/input/keyboard/Kconfig
+++ b/drivers/input/keyboard/Kconfig
@@ -756,4 +756,13 @@ config KEYBOARD_BCM
 	  To compile this driver as a module, choose M here: the
 	  module will be called bcm-keypad.
 
+config KEYBOARD_MTK_PMIC
+	tristate "MediaTek PMIC keys support"
+	depends on MFD_MT6397
+	help
+	  Say Y here if you want to use the pmic keys (powerkey/homekey).
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called pmic-keys.
+
 endif
diff --git a/drivers/input/keyboard/Makefile b/drivers/input/keyboard/Makefile
index d2338ba..20c0b98 100644
--- a/drivers/input/keyboard/Makefile
+++ b/drivers/input/keyboard/Makefile
@@ -40,6 +40,7 @@ obj-$(CONFIG_KEYBOARD_MATRIX)		+= matrix_keypad.o
 obj-$(CONFIG_KEYBOARD_MAX7359)		+= max7359_keypad.o
 obj-$(CONFIG_KEYBOARD_MCS)		+= mcs_touchkey.o
 obj-$(CONFIG_KEYBOARD_MPR121)		+= mpr121_touchkey.o
+obj-$(CONFIG_KEYBOARD_MTK_PMIC) 	+= mtk-pmic-keys.o
 obj-$(CONFIG_KEYBOARD_NEWTON)		+= newtonkbd.o
 obj-$(CONFIG_KEYBOARD_NOMADIK)		+= nomadik-ske-keypad.o
 obj-$(CONFIG_KEYBOARD_NSPIRE)		+= nspire-keypad.o
diff --git a/drivers/input/keyboard/mtk-pmic-keys.c b/drivers/input/keyboard/mtk-pmic-keys.c
new file mode 100644
index 0000000..40518ce
--- /dev/null
+++ b/drivers/input/keyboard/mtk-pmic-keys.c
@@ -0,0 +1,308 @@
+/*
+ * Copyright (C) 2017 MediaTek, Inc.
+ *
+ * Author: Chen Zhong <chen.zhong@mediatek.com>
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/input.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/kernel.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/regmap.h>
+#include <linux/mfd/mt6323/registers.h>
+#include <linux/mfd/mt6397/registers.h>
+#include <linux/mfd/mt6397/core.h>
+
+#define PWRKEY_RST_EN_MASK	0x1
+#define PWRKEY_RST_EN_SHIFT	6
+#define HOMEKEY_RST_EN_MASK	0x1
+#define HOMEKEY_RST_EN_SHIFT	5
+#define RST_DU_MASK		0x3
+#define RST_DU_SHIFT		8
+
+#define PMIC_PWRKEY_INDEX	0
+#define PMIC_HOMEKEY_INDEX	1
+#define PMIC_MAX_KEY_COUNT	2
+
+struct pmic_keys_regs {
+	u32 deb_reg;
+	u32 deb_mask;
+	u32 intsel_reg;
+	u32 intsel_mask;
+};
+
+#define PMIC_KEYS_REGS(_deb_reg, _deb_mask, _intsel_reg, _intsel_mask)	\
+{									\
+	.deb_reg		= _deb_reg,				\
+	.deb_mask		= _deb_mask,				\
+	.intsel_reg		= _intsel_reg,				\
+	.intsel_mask		= _intsel_mask,				\
+}
+
+struct pmic_regs {
+	const struct pmic_keys_regs keys_regs[PMIC_MAX_KEY_COUNT];
+	u32 pmic_rst_reg;
+};
+
+static const struct pmic_regs mt6397_regs = {
+	.keys_regs[PMIC_PWRKEY_INDEX] = PMIC_KEYS_REGS(MT6397_CHRSTATUS,
+		0x8, MT6397_INT_RSV, 0x10),
+	.keys_regs[PMIC_HOMEKEY_INDEX] = PMIC_KEYS_REGS(MT6397_OCSTATUS2,
+		0x10, MT6397_INT_RSV, 0x8),
+	.pmic_rst_reg = MT6397_TOP_RST_MISC,
+};
+
+static const struct pmic_regs mt6323_regs = {
+	.keys_regs[PMIC_PWRKEY_INDEX] = PMIC_KEYS_REGS(MT6323_CHRSTATUS,
+		0x2, MT6323_INT_MISC_CON, 0x10),
+	.keys_regs[PMIC_HOMEKEY_INDEX] = PMIC_KEYS_REGS(MT6323_CHRSTATUS,
+		0x4, MT6323_INT_MISC_CON, 0x8),
+	.pmic_rst_reg = MT6323_TOP_RST_MISC,
+};
+
+struct pmic_keys_info {
+	struct mtk_pmic_keys *keys;
+	const struct pmic_keys_regs *regs;
+	unsigned int keycode;
+	int irq;
+	bool wakeup:1;
+};
+
+struct mtk_pmic_keys {
+	struct input_dev *input_dev;
+	struct device *dev;
+	struct regmap *regmap;
+	struct pmic_keys_info keys[PMIC_MAX_KEY_COUNT];
+};
+
+enum long_press_mode {
+	LP_DISABLE,
+	LP_ONEKEY,
+	LP_TWOKEY,
+};
+
+static void long_press_reset_setup(struct mtk_pmic_keys *keys, u32 pmic_rst_reg)
+{
+	int ret;
+	u32 long_press_mode, long_press_debounce;
+
+	ret = of_property_read_u32(keys->dev->of_node,
+		"debounce-interval", &long_press_debounce);
+	if (ret)
+		long_press_debounce = 0;
+
+	regmap_update_bits(keys->regmap, pmic_rst_reg,
+			   RST_DU_MASK << RST_DU_SHIFT,
+			   long_press_debounce << RST_DU_SHIFT);
+
+	ret = of_property_read_u32(keys->dev->of_node,
+		"mediatek,long-press-mode", &long_press_mode);
+	if (ret)
+		long_press_mode = LP_DISABLE;
+
+	switch (long_press_mode) {
+	case LP_ONEKEY:
+		regmap_update_bits(keys->regmap, pmic_rst_reg,
+				   PWRKEY_RST_EN_MASK << PWRKEY_RST_EN_SHIFT,
+				   PWRKEY_RST_EN_MASK << PWRKEY_RST_EN_SHIFT);
+		regmap_update_bits(keys->regmap, pmic_rst_reg,
+				   HOMEKEY_RST_EN_MASK << HOMEKEY_RST_EN_SHIFT,
+				   0);
+		break;
+	case LP_TWOKEY:
+		regmap_update_bits(keys->regmap, pmic_rst_reg,
+				   PWRKEY_RST_EN_MASK << PWRKEY_RST_EN_SHIFT,
+				   PWRKEY_RST_EN_MASK << PWRKEY_RST_EN_SHIFT);
+		regmap_update_bits(keys->regmap, pmic_rst_reg,
+				   HOMEKEY_RST_EN_MASK << HOMEKEY_RST_EN_SHIFT,
+				   HOMEKEY_RST_EN_MASK << HOMEKEY_RST_EN_SHIFT);
+		break;
+	case LP_DISABLE:
+		regmap_update_bits(keys->regmap, pmic_rst_reg,
+				   PWRKEY_RST_EN_MASK << PWRKEY_RST_EN_SHIFT,
+				   0);
+		regmap_update_bits(keys->regmap, pmic_rst_reg,
+				   HOMEKEY_RST_EN_MASK << HOMEKEY_RST_EN_SHIFT,
+				   0);
+		break;
+	default:
+		break;
+	}
+}
+
+static irqreturn_t mtk_pmic_keys_irq_handler_thread(int irq, void *data)
+{
+	struct pmic_keys_info *info = data;
+	u32 key_deb, pressed;
+
+	regmap_read(info->keys->regmap, info->regs->deb_reg, &key_deb);
+
+	key_deb &= info->regs->deb_mask;
+
+	pressed = !key_deb;
+
+	input_report_key(info->keys->input_dev, info->keycode, pressed);
+	input_sync(info->keys->input_dev);
+
+	dev_dbg(info->keys->dev, "(%s) key =%d using PMIC\n",
+		 pressed ? "pressed" : "released", info->keycode);
+
+	return IRQ_HANDLED;
+}
+
+static int mtk_pmic_key_setup(struct mtk_pmic_keys *keys,
+		struct pmic_keys_info *info)
+{
+	int ret;
+
+	info->keys = keys;
+
+	ret = regmap_update_bits(keys->regmap, info->regs->intsel_reg,
+				 info->regs->intsel_mask,
+				 info->regs->intsel_mask);
+	if (ret < 0)
+		return ret;
+
+	ret = devm_request_threaded_irq(keys->dev, info->irq, NULL,
+					mtk_pmic_keys_irq_handler_thread,
+					IRQF_ONESHOT | IRQF_TRIGGER_HIGH,
+					"mtk-pmic-keys", info);
+	if (ret) {
+		dev_err(keys->dev, "Failed to request IRQ: %d: %d\n",
+			info->irq, ret);
+		return ret;
+	}
+
+	if (info->wakeup)
+		irq_set_irq_wake(info->irq, 1);
+
+	input_set_capability(keys->input_dev, EV_KEY, info->keycode);
+
+	return 0;
+}
+
+static const struct of_device_id of_pmic_keys_match_tbl[] = {
+	{
+		.compatible = "mediatek,mt6397-keys",
+		.data = &mt6397_regs,
+	}, {
+		.compatible = "mediatek,mt6323-keys",
+		.data = &mt6323_regs,
+	}, {
+		/* sentinel */
+	}
+};
+MODULE_DEVICE_TABLE(of, of_pmic_keys_match_tbl);
+
+static int mtk_pmic_keys_probe(struct platform_device *pdev)
+{
+	int error, index = 0;
+	unsigned int keycount;
+	unsigned int keycodes[PMIC_MAX_KEY_COUNT];
+	unsigned int wakeup_srcs[PMIC_MAX_KEY_COUNT];
+	struct mt6397_chip *pmic_chip = dev_get_drvdata(pdev->dev.parent);
+	struct mtk_pmic_keys *keys;
+	const struct pmic_regs *pmic_regs;
+	struct input_dev *input_dev;
+	const struct of_device_id *of_id =
+		of_match_device(of_pmic_keys_match_tbl, &pdev->dev);
+
+	keys = devm_kzalloc(&pdev->dev, sizeof(*keys), GFP_KERNEL);
+	if (!keys)
+		return -ENOMEM;
+
+	keys->dev = &pdev->dev;
+	keys->regmap = pmic_chip->regmap;
+	pmic_regs = of_id->data;
+
+	keys->input_dev = input_dev = devm_input_allocate_device(keys->dev);
+	if (!input_dev) {
+		dev_err(keys->dev, "input allocate device fail.\n");
+		return -ENOMEM;
+	}
+
+	input_dev->name = "mtk-pmic-keys";
+	input_dev->id.bustype = BUS_HOST;
+	input_dev->id.vendor = 0x0001;
+	input_dev->id.product = 0x0001;
+	input_dev->id.version = 0x0001;
+
+	keycount = device_property_read_u32_array(keys->dev, "linux,keycodes",
+						  NULL, 0);
+	if (keycount > PMIC_MAX_KEY_COUNT) {
+		dev_err(keys->dev, "too many keys defined (%d)\n", keycount);
+		return -EINVAL;
+	}
+
+	error = device_property_read_u32_array(keys->dev, "linux,keycodes",
+					       keycodes, keycount);
+	if (error) {
+		dev_err(keys->dev,
+			"failed to read linux,keycode property: %d\n", error);
+		return error;
+	}
+
+	error = device_property_read_u32_array(keys->dev, "wakeup-source",
+					       wakeup_srcs, keycount);
+	if (error) {
+		dev_err(keys->dev,
+			"failed to read wakeup-source property: %d\n", error);
+		return error;
+	}
+
+	for (index = 0; index < keycount; index++) {
+		keys->keys[index].regs = &pmic_regs->keys_regs[index];
+
+		keys->keys[index].irq = platform_get_irq(pdev, index);
+		if (keys->keys[index].irq < 0)
+			return keys->keys[index].irq;
+
+		keys->keys[index].keycode = keycodes[index];
+
+		if (wakeup_srcs[index])
+			keys->keys[index].wakeup = true;
+
+		error = mtk_pmic_key_setup(keys, &keys->keys[index]);
+		if (error)
+			return error;
+	}
+
+	error = input_register_device(input_dev);
+	if (error) {
+		dev_err(&pdev->dev,
+			"register input device failed (%d)\n", error);
+		return error;
+	}
+
+	long_press_reset_setup(keys, pmic_regs->pmic_rst_reg);
+
+	return 0;
+}
+
+static struct platform_driver pmic_keys_pdrv = {
+	.probe = mtk_pmic_keys_probe,
+	.driver = {
+		   .name = "mtk-pmic-keys",
+		   .of_match_table = of_pmic_keys_match_tbl,
+	},
+};
+
+module_platform_driver(pmic_keys_pdrv);
+
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("Chen Zhong <chen.zhong@mediatek.com>");
+MODULE_DESCRIPTION("MTK pmic-keys driver v0.1");
-- 
1.7.9.5

[PATCH v3 4/5] input: Add MediaTek PMIC keys support

[Chen Zhong]

This patch add support to handle MediaTek PMIC MT6397/MT6323 key
interrupts including pwrkey and homekey, also add setting for
long press key shutdown behavior.

Signed-off-by: Chen Zhong <chen.zhong@mediatek.com>
---
 drivers/input/keyboard/Kconfig         |    9 +
 drivers/input/keyboard/Makefile        |    1 +
 drivers/input/keyboard/mtk-pmic-keys.c |  308 ++++++++++++++++++++++++++++++++
 3 files changed, 318 insertions(+)
 create mode 100644 drivers/input/keyboard/mtk-pmic-keys.c

diff --git a/drivers/input/keyboard/Kconfig b/drivers/input/keyboard/Kconfig
index 4c4ab1c..bd4e20a 100644
--- a/drivers/input/keyboard/Kconfig
+++ b/drivers/input/keyboard/Kconfig
@@ -756,4 +756,13 @@ config KEYBOARD_BCM
 	  To compile this driver as a module, choose M here: the
 	  module will be called bcm-keypad.
 
+config KEYBOARD_MTK_PMIC
+	tristate "MediaTek PMIC keys support"
+	depends on MFD_MT6397
+	help
+	  Say Y here if you want to use the pmic keys (powerkey/homekey).
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called pmic-keys.
+
 endif
diff --git a/drivers/input/keyboard/Makefile b/drivers/input/keyboard/Makefile
index d2338ba..20c0b98 100644
--- a/drivers/input/keyboard/Makefile
+++ b/drivers/input/keyboard/Makefile
@@ -40,6 +40,7 @@ obj-$(CONFIG_KEYBOARD_MATRIX)		+= matrix_keypad.o
 obj-$(CONFIG_KEYBOARD_MAX7359)		+= max7359_keypad.o
 obj-$(CONFIG_KEYBOARD_MCS)		+= mcs_touchkey.o
 obj-$(CONFIG_KEYBOARD_MPR121)		+= mpr121_touchkey.o
+obj-$(CONFIG_KEYBOARD_MTK_PMIC) 	+= mtk-pmic-keys.o
 obj-$(CONFIG_KEYBOARD_NEWTON)		+= newtonkbd.o
 obj-$(CONFIG_KEYBOARD_NOMADIK)		+= nomadik-ske-keypad.o
 obj-$(CONFIG_KEYBOARD_NSPIRE)		+= nspire-keypad.o
diff --git a/drivers/input/keyboard/mtk-pmic-keys.c b/drivers/input/keyboard/mtk-pmic-keys.c
new file mode 100644
index 0000000..40518ce
--- /dev/null
+++ b/drivers/input/keyboard/mtk-pmic-keys.c
@@ -0,0 +1,308 @@
+/*
+ * Copyright (C) 2017 MediaTek, Inc.
+ *
+ * Author: Chen Zhong <chen.zhong@mediatek.com>
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/input.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/kernel.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/regmap.h>
+#include <linux/mfd/mt6323/registers.h>
+#include <linux/mfd/mt6397/registers.h>
+#include <linux/mfd/mt6397/core.h>
+
+#define PWRKEY_RST_EN_MASK	0x1
+#define PWRKEY_RST_EN_SHIFT	6
+#define HOMEKEY_RST_EN_MASK	0x1
+#define HOMEKEY_RST_EN_SHIFT	5
+#define RST_DU_MASK		0x3
+#define RST_DU_SHIFT		8
+
+#define PMIC_PWRKEY_INDEX	0
+#define PMIC_HOMEKEY_INDEX	1
+#define PMIC_MAX_KEY_COUNT	2
+
+struct pmic_keys_regs {
+	u32 deb_reg;
+	u32 deb_mask;
+	u32 intsel_reg;
+	u32 intsel_mask;
+};
+
+#define PMIC_KEYS_REGS(_deb_reg, _deb_mask, _intsel_reg, _intsel_mask)	\
+{									\
+	.deb_reg		= _deb_reg,				\
+	.deb_mask		= _deb_mask,				\
+	.intsel_reg		= _intsel_reg,				\
+	.intsel_mask		= _intsel_mask,				\
+}
+
+struct pmic_regs {
+	const struct pmic_keys_regs keys_regs[PMIC_MAX_KEY_COUNT];
+	u32 pmic_rst_reg;
+};
+
+static const struct pmic_regs mt6397_regs = {
+	.keys_regs[PMIC_PWRKEY_INDEX] = PMIC_KEYS_REGS(MT6397_CHRSTATUS,
+		0x8, MT6397_INT_RSV, 0x10),
+	.keys_regs[PMIC_HOMEKEY_INDEX] = PMIC_KEYS_REGS(MT6397_OCSTATUS2,
+		0x10, MT6397_INT_RSV, 0x8),
+	.pmic_rst_reg = MT6397_TOP_RST_MISC,
+};
+
+static const struct pmic_regs mt6323_regs = {
+	.keys_regs[PMIC_PWRKEY_INDEX] = PMIC_KEYS_REGS(MT6323_CHRSTATUS,
+		0x2, MT6323_INT_MISC_CON, 0x10),
+	.keys_regs[PMIC_HOMEKEY_INDEX] = PMIC_KEYS_REGS(MT6323_CHRSTATUS,
+		0x4, MT6323_INT_MISC_CON, 0x8),
+	.pmic_rst_reg = MT6323_TOP_RST_MISC,
+};
+
+struct pmic_keys_info {
+	struct mtk_pmic_keys *keys;
+	const struct pmic_keys_regs *regs;
+	unsigned int keycode;
+	int irq;
+	bool wakeup:1;
+};
+
+struct mtk_pmic_keys {
+	struct input_dev *input_dev;
+	struct device *dev;
+	struct regmap *regmap;
+	struct pmic_keys_info keys[PMIC_MAX_KEY_COUNT];
+};
+
+enum long_press_mode {
+	LP_DISABLE,
+	LP_ONEKEY,
+	LP_TWOKEY,
+};
+
+static void long_press_reset_setup(struct mtk_pmic_keys *keys, u32 pmic_rst_reg)
+{
+	int ret;
+	u32 long_press_mode, long_press_debounce;
+
+	ret = of_property_read_u32(keys->dev->of_node,
+		"debounce-interval", &long_press_debounce);
+	if (ret)
+		long_press_debounce = 0;
+
+	regmap_update_bits(keys->regmap, pmic_rst_reg,
+			   RST_DU_MASK << RST_DU_SHIFT,
+			   long_press_debounce << RST_DU_SHIFT);
+
+	ret = of_property_read_u32(keys->dev->of_node,
+		"mediatek,long-press-mode", &long_press_mode);
+	if (ret)
+		long_press_mode = LP_DISABLE;
+
+	switch (long_press_mode) {
+	case LP_ONEKEY:
+		regmap_update_bits(keys->regmap, pmic_rst_reg,
+				   PWRKEY_RST_EN_MASK << PWRKEY_RST_EN_SHIFT,
+				   PWRKEY_RST_EN_MASK << PWRKEY_RST_EN_SHIFT);
+		regmap_update_bits(keys->regmap, pmic_rst_reg,
+				   HOMEKEY_RST_EN_MASK << HOMEKEY_RST_EN_SHIFT,
+				   0);
+		break;
+	case LP_TWOKEY:
+		regmap_update_bits(keys->regmap, pmic_rst_reg,
+				   PWRKEY_RST_EN_MASK << PWRKEY_RST_EN_SHIFT,
+				   PWRKEY_RST_EN_MASK << PWRKEY_RST_EN_SHIFT);
+		regmap_update_bits(keys->regmap, pmic_rst_reg,
+				   HOMEKEY_RST_EN_MASK << HOMEKEY_RST_EN_SHIFT,
+				   HOMEKEY_RST_EN_MASK << HOMEKEY_RST_EN_SHIFT);
+		break;
+	case LP_DISABLE:
+		regmap_update_bits(keys->regmap, pmic_rst_reg,
+				   PWRKEY_RST_EN_MASK << PWRKEY_RST_EN_SHIFT,
+				   0);
+		regmap_update_bits(keys->regmap, pmic_rst_reg,
+				   HOMEKEY_RST_EN_MASK << HOMEKEY_RST_EN_SHIFT,
+				   0);
+		break;
+	default:
+		break;
+	}
+}
+
+static irqreturn_t mtk_pmic_keys_irq_handler_thread(int irq, void *data)
+{
+	struct pmic_keys_info *info = data;
+	u32 key_deb, pressed;
+
+	regmap_read(info->keys->regmap, info->regs->deb_reg, &key_deb);
+
+	key_deb &= info->regs->deb_mask;
+
+	pressed = !key_deb;
+
+	input_report_key(info->keys->input_dev, info->keycode, pressed);
+	input_sync(info->keys->input_dev);
+
+	dev_dbg(info->keys->dev, "(%s) key =%d using PMIC\n",
+		 pressed ? "pressed" : "released", info->keycode);
+
+	return IRQ_HANDLED;
+}
+
+static int mtk_pmic_key_setup(struct mtk_pmic_keys *keys,
+		struct pmic_keys_info *info)
+{
+	int ret;
+
+	info->keys = keys;
+
+	ret = regmap_update_bits(keys->regmap, info->regs->intsel_reg,
+				 info->regs->intsel_mask,
+				 info->regs->intsel_mask);
+	if (ret < 0)
+		return ret;
+
+	ret = devm_request_threaded_irq(keys->dev, info->irq, NULL,
+					mtk_pmic_keys_irq_handler_thread,
+					IRQF_ONESHOT | IRQF_TRIGGER_HIGH,
+					"mtk-pmic-keys", info);
+	if (ret) {
+		dev_err(keys->dev, "Failed to request IRQ: %d: %d\n",
+			info->irq, ret);
+		return ret;
+	}
+
+	if (info->wakeup)
+		irq_set_irq_wake(info->irq, 1);
+
+	input_set_capability(keys->input_dev, EV_KEY, info->keycode);
+
+	return 0;
+}
+
+static const struct of_device_id of_pmic_keys_match_tbl[] = {
+	{
+		.compatible = "mediatek,mt6397-keys",
+		.data = &mt6397_regs,
+	}, {
+		.compatible = "mediatek,mt6323-keys",
+		.data = &mt6323_regs,
+	}, {
+		/* sentinel */
+	}
+};
+MODULE_DEVICE_TABLE(of, of_pmic_keys_match_tbl);
+
+static int mtk_pmic_keys_probe(struct platform_device *pdev)
+{
+	int error, index = 0;
+	unsigned int keycount;
+	unsigned int keycodes[PMIC_MAX_KEY_COUNT];
+	unsigned int wakeup_srcs[PMIC_MAX_KEY_COUNT];
+	struct mt6397_chip *pmic_chip = dev_get_drvdata(pdev->dev.parent);
+	struct mtk_pmic_keys *keys;
+	const struct pmic_regs *pmic_regs;
+	struct input_dev *input_dev;
+	const struct of_device_id *of_id =
+		of_match_device(of_pmic_keys_match_tbl, &pdev->dev);
+
+	keys = devm_kzalloc(&pdev->dev, sizeof(*keys), GFP_KERNEL);
+	if (!keys)
+		return -ENOMEM;
+
+	keys->dev = &pdev->dev;
+	keys->regmap = pmic_chip->regmap;
+	pmic_regs = of_id->data;
+
+	keys->input_dev = input_dev = devm_input_allocate_device(keys->dev);
+	if (!input_dev) {
+		dev_err(keys->dev, "input allocate device fail.\n");
+		return -ENOMEM;
+	}
+
+	input_dev->name = "mtk-pmic-keys";
+	input_dev->id.bustype = BUS_HOST;
+	input_dev->id.vendor = 0x0001;
+	input_dev->id.product = 0x0001;
+	input_dev->id.version = 0x0001;
+
+	keycount = device_property_read_u32_array(keys->dev, "linux,keycodes",
+						  NULL, 0);
+	if (keycount > PMIC_MAX_KEY_COUNT) {
+		dev_err(keys->dev, "too many keys defined (%d)\n", keycount);
+		return -EINVAL;
+	}
+
+	error = device_property_read_u32_array(keys->dev, "linux,keycodes",
+					       keycodes, keycount);
+	if (error) {
+		dev_err(keys->dev,
+			"failed to read linux,keycode property: %d\n", error);
+		return error;
+	}
+
+	error = device_property_read_u32_array(keys->dev, "wakeup-source",
+					       wakeup_srcs, keycount);
+	if (error) {
+		dev_err(keys->dev,
+			"failed to read wakeup-source property: %d\n", error);
+		return error;
+	}
+
+	for (index = 0; index < keycount; index++) {
+		keys->keys[index].regs = &pmic_regs->keys_regs[index];
+
+		keys->keys[index].irq = platform_get_irq(pdev, index);
+		if (keys->keys[index].irq < 0)
+			return keys->keys[index].irq;
+
+		keys->keys[index].keycode = keycodes[index];
+
+		if (wakeup_srcs[index])
+			keys->keys[index].wakeup = true;
+
+		error = mtk_pmic_key_setup(keys, &keys->keys[index]);
+		if (error)
+			return error;
+	}
+
+	error = input_register_device(input_dev);
+	if (error) {
+		dev_err(&pdev->dev,
+			"register input device failed (%d)\n", error);
+		return error;
+	}
+
+	long_press_reset_setup(keys, pmic_regs->pmic_rst_reg);
+
+	return 0;
+}
+
+static struct platform_driver pmic_keys_pdrv = {
+	.probe = mtk_pmic_keys_probe,
+	.driver = {
+		   .name = "mtk-pmic-keys",
+		   .of_match_table = of_pmic_keys_match_tbl,
+	},
+};
+
+module_platform_driver(pmic_keys_pdrv);
+
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("Chen Zhong <chen.zhong@mediatek.com>");
+MODULE_DESCRIPTION("MTK pmic-keys driver v0.1");
-- 
1.7.9.5

[PATCH v3 4/5] input: Add MediaTek PMIC keys support

[Chen Zhong]

This patch add support to handle MediaTek PMIC MT6397/MT6323 key
interrupts including pwrkey and homekey, also add setting for
long press key shutdown behavior.

Signed-off-by: Chen Zhong <chen.zhong@mediatek.com>
---
 drivers/input/keyboard/Kconfig         |    9 +
 drivers/input/keyboard/Makefile        |    1 +
 drivers/input/keyboard/mtk-pmic-keys.c |  308 ++++++++++++++++++++++++++++++++
 3 files changed, 318 insertions(+)
 create mode 100644 drivers/input/keyboard/mtk-pmic-keys.c

diff --git a/drivers/input/keyboard/Kconfig b/drivers/input/keyboard/Kconfig
index 4c4ab1c..bd4e20a 100644
--- a/drivers/input/keyboard/Kconfig
+++ b/drivers/input/keyboard/Kconfig
@@ -756,4 +756,13 @@ config KEYBOARD_BCM
 	  To compile this driver as a module, choose M here: the
 	  module will be called bcm-keypad.
 
+config KEYBOARD_MTK_PMIC
+	tristate "MediaTek PMIC keys support"
+	depends on MFD_MT6397
+	help
+	  Say Y here if you want to use the pmic keys (powerkey/homekey).
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called pmic-keys.
+
 endif
diff --git a/drivers/input/keyboard/Makefile b/drivers/input/keyboard/Makefile
index d2338ba..20c0b98 100644
--- a/drivers/input/keyboard/Makefile
+++ b/drivers/input/keyboard/Makefile
@@ -40,6 +40,7 @@ obj-$(CONFIG_KEYBOARD_MATRIX)		+= matrix_keypad.o
 obj-$(CONFIG_KEYBOARD_MAX7359)		+= max7359_keypad.o
 obj-$(CONFIG_KEYBOARD_MCS)		+= mcs_touchkey.o
 obj-$(CONFIG_KEYBOARD_MPR121)		+= mpr121_touchkey.o
+obj-$(CONFIG_KEYBOARD_MTK_PMIC) 	+= mtk-pmic-keys.o
 obj-$(CONFIG_KEYBOARD_NEWTON)		+= newtonkbd.o
 obj-$(CONFIG_KEYBOARD_NOMADIK)		+= nomadik-ske-keypad.o
 obj-$(CONFIG_KEYBOARD_NSPIRE)		+= nspire-keypad.o
diff --git a/drivers/input/keyboard/mtk-pmic-keys.c b/drivers/input/keyboard/mtk-pmic-keys.c
new file mode 100644
index 0000000..40518ce
--- /dev/null
+++ b/drivers/input/keyboard/mtk-pmic-keys.c
@@ -0,0 +1,308 @@
+/*
+ * Copyright (C) 2017 MediaTek, Inc.
+ *
+ * Author: Chen Zhong <chen.zhong@mediatek.com>
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/input.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/kernel.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/regmap.h>
+#include <linux/mfd/mt6323/registers.h>
+#include <linux/mfd/mt6397/registers.h>
+#include <linux/mfd/mt6397/core.h>
+
+#define PWRKEY_RST_EN_MASK	0x1
+#define PWRKEY_RST_EN_SHIFT	6
+#define HOMEKEY_RST_EN_MASK	0x1
+#define HOMEKEY_RST_EN_SHIFT	5
+#define RST_DU_MASK		0x3
+#define RST_DU_SHIFT		8
+
+#define PMIC_PWRKEY_INDEX	0
+#define PMIC_HOMEKEY_INDEX	1
+#define PMIC_MAX_KEY_COUNT	2
+
+struct pmic_keys_regs {
+	u32 deb_reg;
+	u32 deb_mask;
+	u32 intsel_reg;
+	u32 intsel_mask;
+};
+
+#define PMIC_KEYS_REGS(_deb_reg, _deb_mask, _intsel_reg, _intsel_mask)	\
+{									\
+	.deb_reg		= _deb_reg,				\
+	.deb_mask		= _deb_mask,				\
+	.intsel_reg		= _intsel_reg,				\
+	.intsel_mask		= _intsel_mask,				\
+}
+
+struct pmic_regs {
+	const struct pmic_keys_regs keys_regs[PMIC_MAX_KEY_COUNT];
+	u32 pmic_rst_reg;
+};
+
+static const struct pmic_regs mt6397_regs = {
+	.keys_regs[PMIC_PWRKEY_INDEX] = PMIC_KEYS_REGS(MT6397_CHRSTATUS,
+		0x8, MT6397_INT_RSV, 0x10),
+	.keys_regs[PMIC_HOMEKEY_INDEX] = PMIC_KEYS_REGS(MT6397_OCSTATUS2,
+		0x10, MT6397_INT_RSV, 0x8),
+	.pmic_rst_reg = MT6397_TOP_RST_MISC,
+};
+
+static const struct pmic_regs mt6323_regs = {
+	.keys_regs[PMIC_PWRKEY_INDEX] = PMIC_KEYS_REGS(MT6323_CHRSTATUS,
+		0x2, MT6323_INT_MISC_CON, 0x10),
+	.keys_regs[PMIC_HOMEKEY_INDEX] = PMIC_KEYS_REGS(MT6323_CHRSTATUS,
+		0x4, MT6323_INT_MISC_CON, 0x8),
+	.pmic_rst_reg = MT6323_TOP_RST_MISC,
+};
+
+struct pmic_keys_info {
+	struct mtk_pmic_keys *keys;
+	const struct pmic_keys_regs *regs;
+	unsigned int keycode;
+	int irq;
+	bool wakeup:1;
+};
+
+struct mtk_pmic_keys {
+	struct input_dev *input_dev;
+	struct device *dev;
+	struct regmap *regmap;
+	struct pmic_keys_info keys[PMIC_MAX_KEY_COUNT];
+};
+
+enum long_press_mode {
+	LP_DISABLE,
+	LP_ONEKEY,
+	LP_TWOKEY,
+};
+
+static void long_press_reset_setup(struct mtk_pmic_keys *keys, u32 pmic_rst_reg)
+{
+	int ret;
+	u32 long_press_mode, long_press_debounce;
+
+	ret = of_property_read_u32(keys->dev->of_node,
+		"debounce-interval", &long_press_debounce);
+	if (ret)
+		long_press_debounce = 0;
+
+	regmap_update_bits(keys->regmap, pmic_rst_reg,
+			   RST_DU_MASK << RST_DU_SHIFT,
+			   long_press_debounce << RST_DU_SHIFT);
+
+	ret = of_property_read_u32(keys->dev->of_node,
+		"mediatek,long-press-mode", &long_press_mode);
+	if (ret)
+		long_press_mode = LP_DISABLE;
+
+	switch (long_press_mode) {
+	case LP_ONEKEY:
+		regmap_update_bits(keys->regmap, pmic_rst_reg,
+				   PWRKEY_RST_EN_MASK << PWRKEY_RST_EN_SHIFT,
+				   PWRKEY_RST_EN_MASK << PWRKEY_RST_EN_SHIFT);
+		regmap_update_bits(keys->regmap, pmic_rst_reg,
+				   HOMEKEY_RST_EN_MASK << HOMEKEY_RST_EN_SHIFT,
+				   0);
+		break;
+	case LP_TWOKEY:
+		regmap_update_bits(keys->regmap, pmic_rst_reg,
+				   PWRKEY_RST_EN_MASK << PWRKEY_RST_EN_SHIFT,
+				   PWRKEY_RST_EN_MASK << PWRKEY_RST_EN_SHIFT);
+		regmap_update_bits(keys->regmap, pmic_rst_reg,
+				   HOMEKEY_RST_EN_MASK << HOMEKEY_RST_EN_SHIFT,
+				   HOMEKEY_RST_EN_MASK << HOMEKEY_RST_EN_SHIFT);
+		break;
+	case LP_DISABLE:
+		regmap_update_bits(keys->regmap, pmic_rst_reg,
+				   PWRKEY_RST_EN_MASK << PWRKEY_RST_EN_SHIFT,
+				   0);
+		regmap_update_bits(keys->regmap, pmic_rst_reg,
+				   HOMEKEY_RST_EN_MASK << HOMEKEY_RST_EN_SHIFT,
+				   0);
+		break;
+	default:
+		break;
+	}
+}
+
+static irqreturn_t mtk_pmic_keys_irq_handler_thread(int irq, void *data)
+{
+	struct pmic_keys_info *info = data;
+	u32 key_deb, pressed;
+
+	regmap_read(info->keys->regmap, info->regs->deb_reg, &key_deb);
+
+	key_deb &= info->regs->deb_mask;
+
+	pressed = !key_deb;
+
+	input_report_key(info->keys->input_dev, info->keycode, pressed);
+	input_sync(info->keys->input_dev);
+
+	dev_dbg(info->keys->dev, "(%s) key =%d using PMIC\n",
+		 pressed ? "pressed" : "released", info->keycode);
+
+	return IRQ_HANDLED;
+}
+
+static int mtk_pmic_key_setup(struct mtk_pmic_keys *keys,
+		struct pmic_keys_info *info)
+{
+	int ret;
+
+	info->keys = keys;
+
+	ret = regmap_update_bits(keys->regmap, info->regs->intsel_reg,
+				 info->regs->intsel_mask,
+				 info->regs->intsel_mask);
+	if (ret < 0)
+		return ret;
+
+	ret = devm_request_threaded_irq(keys->dev, info->irq, NULL,
+					mtk_pmic_keys_irq_handler_thread,
+					IRQF_ONESHOT | IRQF_TRIGGER_HIGH,
+					"mtk-pmic-keys", info);
+	if (ret) {
+		dev_err(keys->dev, "Failed to request IRQ: %d: %d\n",
+			info->irq, ret);
+		return ret;
+	}
+
+	if (info->wakeup)
+		irq_set_irq_wake(info->irq, 1);
+
+	input_set_capability(keys->input_dev, EV_KEY, info->keycode);
+
+	return 0;
+}
+
+static const struct of_device_id of_pmic_keys_match_tbl[] = {
+	{
+		.compatible = "mediatek,mt6397-keys",
+		.data = &mt6397_regs,
+	}, {
+		.compatible = "mediatek,mt6323-keys",
+		.data = &mt6323_regs,
+	}, {
+		/* sentinel */
+	}
+};
+MODULE_DEVICE_TABLE(of, of_pmic_keys_match_tbl);
+
+static int mtk_pmic_keys_probe(struct platform_device *pdev)
+{
+	int error, index = 0;
+	unsigned int keycount;
+	unsigned int keycodes[PMIC_MAX_KEY_COUNT];
+	unsigned int wakeup_srcs[PMIC_MAX_KEY_COUNT];
+	struct mt6397_chip *pmic_chip = dev_get_drvdata(pdev->dev.parent);
+	struct mtk_pmic_keys *keys;
+	const struct pmic_regs *pmic_regs;
+	struct input_dev *input_dev;
+	const struct of_device_id *of_id =
+		of_match_device(of_pmic_keys_match_tbl, &pdev->dev);
+
+	keys = devm_kzalloc(&pdev->dev, sizeof(*keys), GFP_KERNEL);
+	if (!keys)
+		return -ENOMEM;
+
+	keys->dev = &pdev->dev;
+	keys->regmap = pmic_chip->regmap;
+	pmic_regs = of_id->data;
+
+	keys->input_dev = input_dev = devm_input_allocate_device(keys->dev);
+	if (!input_dev) {
+		dev_err(keys->dev, "input allocate device fail.\n");
+		return -ENOMEM;
+	}
+
+	input_dev->name = "mtk-pmic-keys";
+	input_dev->id.bustype = BUS_HOST;
+	input_dev->id.vendor = 0x0001;
+	input_dev->id.product = 0x0001;
+	input_dev->id.version = 0x0001;
+
+	keycount = device_property_read_u32_array(keys->dev, "linux,keycodes",
+						  NULL, 0);
+	if (keycount > PMIC_MAX_KEY_COUNT) {
+		dev_err(keys->dev, "too many keys defined (%d)\n", keycount);
+		return -EINVAL;
+	}
+
+	error = device_property_read_u32_array(keys->dev, "linux,keycodes",
+					       keycodes, keycount);
+	if (error) {
+		dev_err(keys->dev,
+			"failed to read linux,keycode property: %d\n", error);
+		return error;
+	}
+
+	error = device_property_read_u32_array(keys->dev, "wakeup-source",
+					       wakeup_srcs, keycount);
+	if (error) {
+		dev_err(keys->dev,
+			"failed to read wakeup-source property: %d\n", error);
+		return error;
+	}
+
+	for (index = 0; index < keycount; index++) {
+		keys->keys[index].regs = &pmic_regs->keys_regs[index];
+
+		keys->keys[index].irq = platform_get_irq(pdev, index);
+		if (keys->keys[index].irq < 0)
+			return keys->keys[index].irq;
+
+		keys->keys[index].keycode = keycodes[index];
+
+		if (wakeup_srcs[index])
+			keys->keys[index].wakeup = true;
+
+		error = mtk_pmic_key_setup(keys, &keys->keys[index]);
+		if (error)
+			return error;
+	}
+
+	error = input_register_device(input_dev);
+	if (error) {
+		dev_err(&pdev->dev,
+			"register input device failed (%d)\n", error);
+		return error;
+	}
+
+	long_press_reset_setup(keys, pmic_regs->pmic_rst_reg);
+
+	return 0;
+}
+
+static struct platform_driver pmic_keys_pdrv = {
+	.probe = mtk_pmic_keys_probe,
+	.driver = {
+		   .name = "mtk-pmic-keys",
+		   .of_match_table = of_pmic_keys_match_tbl,
+	},
+};
+
+module_platform_driver(pmic_keys_pdrv);
+
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("Chen Zhong <chen.zhong@mediatek.com>");
+MODULE_DESCRIPTION("MTK pmic-keys driver v0.1");
-- 
1.7.9.5

[PATCH v3 5/5] mfd: mt6397: Add PMIC keys support to MT6397 driver

[Chen Zhong]

This patch adds compatible strings and interrupts for pmic keys
which serves as child device of MFD.

Signed-off-by: Chen Zhong <chen.zhong@mediatek.com>
---
 drivers/mfd/mt6397-core.c |   22 +++++++++++++++++++++-
 1 file changed, 21 insertions(+), 1 deletion(-)

diff --git a/drivers/mfd/mt6397-core.c b/drivers/mfd/mt6397-core.c
index 6546d7f..77b64bd 100644
--- a/drivers/mfd/mt6397-core.c
+++ b/drivers/mfd/mt6397-core.c
@@ -43,6 +43,16 @@
 	},
 };
 
+static const struct resource mt6323_keys_resources[] = {
+	DEFINE_RES_IRQ(MT6323_IRQ_STATUS_PWRKEY),
+	DEFINE_RES_IRQ(MT6323_IRQ_STATUS_FCHRKEY),
+};
+
+static const struct resource mt6397_keys_resources[] = {
+	DEFINE_RES_IRQ(MT6397_IRQ_PWRKEY),
+	DEFINE_RES_IRQ(MT6397_IRQ_HOMEKEY),
+};
+
 static const struct mfd_cell mt6323_devs[] = {
 	{
 		.name = "mt6323-regulator",
@@ -50,6 +60,11 @@
 	}, {
 		.name = "mt6323-led",
 		.of_compatible = "mediatek,mt6323-led"
+	}, {
+		.name = "mtk-pmic-keys",
+		.num_resources = ARRAY_SIZE(mt6323_keys_resources),
+		.resources = mt6323_keys_resources,
+		.of_compatible = "mediatek,mt6323-keys"
 	},
 };
 
@@ -71,7 +86,12 @@
 	}, {
 		.name = "mt6397-pinctrl",
 		.of_compatible = "mediatek,mt6397-pinctrl",
-	},
+	}, {
+		.name = "mtk-pmic-keys",
+		.num_resources = ARRAY_SIZE(mt6397_keys_resources),
+		.resources = mt6397_keys_resources,
+		.of_compatible = "mediatek,mt6397-keys"
+	}
 };
 
 static void mt6397_irq_lock(struct irq_data *data)
-- 
1.7.9.5

[PATCH v3 5/5] mfd: mt6397: Add PMIC keys support to MT6397 driver

[Chen Zhong]

This patch adds compatible strings and interrupts for pmic keys
which serves as child device of MFD.

Signed-off-by: Chen Zhong <chen.zhong@mediatek.com>
---
 drivers/mfd/mt6397-core.c |   22 +++++++++++++++++++++-
 1 file changed, 21 insertions(+), 1 deletion(-)

diff --git a/drivers/mfd/mt6397-core.c b/drivers/mfd/mt6397-core.c
index 6546d7f..77b64bd 100644
--- a/drivers/mfd/mt6397-core.c
+++ b/drivers/mfd/mt6397-core.c
@@ -43,6 +43,16 @@
 	},
 };
 
+static const struct resource mt6323_keys_resources[] = {
+	DEFINE_RES_IRQ(MT6323_IRQ_STATUS_PWRKEY),
+	DEFINE_RES_IRQ(MT6323_IRQ_STATUS_FCHRKEY),
+};
+
+static const struct resource mt6397_keys_resources[] = {
+	DEFINE_RES_IRQ(MT6397_IRQ_PWRKEY),
+	DEFINE_RES_IRQ(MT6397_IRQ_HOMEKEY),
+};
+
 static const struct mfd_cell mt6323_devs[] = {
 	{
 		.name = "mt6323-regulator",
@@ -50,6 +60,11 @@
 	}, {
 		.name = "mt6323-led",
 		.of_compatible = "mediatek,mt6323-led"
+	}, {
+		.name = "mtk-pmic-keys",
+		.num_resources = ARRAY_SIZE(mt6323_keys_resources),
+		.resources = mt6323_keys_resources,
+		.of_compatible = "mediatek,mt6323-keys"
 	},
 };
 
@@ -71,7 +86,12 @@
 	}, {
 		.name = "mt6397-pinctrl",
 		.of_compatible = "mediatek,mt6397-pinctrl",
-	},
+	}, {
+		.name = "mtk-pmic-keys",
+		.num_resources = ARRAY_SIZE(mt6397_keys_resources),
+		.resources = mt6397_keys_resources,
+		.of_compatible = "mediatek,mt6397-keys"
+	}
 };
 
 static void mt6397_irq_lock(struct irq_data *data)
-- 
1.7.9.5

[PATCH v3 5/5] mfd: mt6397: Add PMIC keys support to MT6397 driver

[Chen Zhong]

This patch adds compatible strings and interrupts for pmic keys
which serves as child device of MFD.

Signed-off-by: Chen Zhong <chen.zhong@mediatek.com>
---
 drivers/mfd/mt6397-core.c |   22 +++++++++++++++++++++-
 1 file changed, 21 insertions(+), 1 deletion(-)

diff --git a/drivers/mfd/mt6397-core.c b/drivers/mfd/mt6397-core.c
index 6546d7f..77b64bd 100644
--- a/drivers/mfd/mt6397-core.c
+++ b/drivers/mfd/mt6397-core.c
@@ -43,6 +43,16 @@
 	},
 };
 
+static const struct resource mt6323_keys_resources[] = {
+	DEFINE_RES_IRQ(MT6323_IRQ_STATUS_PWRKEY),
+	DEFINE_RES_IRQ(MT6323_IRQ_STATUS_FCHRKEY),
+};
+
+static const struct resource mt6397_keys_resources[] = {
+	DEFINE_RES_IRQ(MT6397_IRQ_PWRKEY),
+	DEFINE_RES_IRQ(MT6397_IRQ_HOMEKEY),
+};
+
 static const struct mfd_cell mt6323_devs[] = {
 	{
 		.name = "mt6323-regulator",
@@ -50,6 +60,11 @@
 	}, {
 		.name = "mt6323-led",
 		.of_compatible = "mediatek,mt6323-led"
+	}, {
+		.name = "mtk-pmic-keys",
+		.num_resources = ARRAY_SIZE(mt6323_keys_resources),
+		.resources = mt6323_keys_resources,
+		.of_compatible = "mediatek,mt6323-keys"
 	},
 };
 
@@ -71,7 +86,12 @@
 	}, {
 		.name = "mt6397-pinctrl",
 		.of_compatible = "mediatek,mt6397-pinctrl",
-	},
+	}, {
+		.name = "mtk-pmic-keys",
+		.num_resources = ARRAY_SIZE(mt6397_keys_resources),
+		.resources = mt6397_keys_resources,
+		.of_compatible = "mediatek,mt6397-keys"
+	}
 };
 
 static void mt6397_irq_lock(struct irq_data *data)
-- 
1.7.9.5

Re: [PATCH v3 1/5] mfd: mt6397: create irq mappings in mfd core driver

[Alexandre Belloni]

On 25/08/2017 at 14:32:29 +0800, Chen Zhong wrote:
> The core driver should create and manage irq mappings instead of
> leaf drivers. This patch change to pass irq domain to
> devm_mfd_add_devices() and it will create mapping for irq resources
> automatically. And remove irq mapping in rtc driver since this has
> been done in core driver.
> 
> Acked-for-MFD-by: Lee Jones <lee.jones@linaro.org>
> Signed-off-by: Chen Zhong <chen.zhong@mediatek.com>
Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>

> ---
>  drivers/mfd/mt6397-core.c |    4 ++--
>  drivers/rtc/rtc-mt6397.c  |    7 +++----
>  2 files changed, 5 insertions(+), 6 deletions(-)
> 
> diff --git a/drivers/mfd/mt6397-core.c b/drivers/mfd/mt6397-core.c
> index 04a601f..6546d7f 100644
> --- a/drivers/mfd/mt6397-core.c
> +++ b/drivers/mfd/mt6397-core.c
> @@ -289,7 +289,7 @@ static int mt6397_probe(struct platform_device *pdev)
>  
>  		ret = devm_mfd_add_devices(&pdev->dev, -1, mt6323_devs,
>  					   ARRAY_SIZE(mt6323_devs), NULL,
> -					   0, NULL);
> +					   0, pmic->irq_domain);
>  		break;
>  
>  	case MT6397_CID_CODE:
> @@ -304,7 +304,7 @@ static int mt6397_probe(struct platform_device *pdev)
>  
>  		ret = devm_mfd_add_devices(&pdev->dev, -1, mt6397_devs,
>  					   ARRAY_SIZE(mt6397_devs), NULL,
> -					   0, NULL);
> +					   0, pmic->irq_domain);
>  		break;
>  
>  	default:
> diff --git a/drivers/rtc/rtc-mt6397.c b/drivers/rtc/rtc-mt6397.c
> index 1a61fa5..385f830 100644
> --- a/drivers/rtc/rtc-mt6397.c
> +++ b/drivers/rtc/rtc-mt6397.c
> @@ -322,10 +322,9 @@ static int mtk_rtc_probe(struct platform_device *pdev)
>  	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
>  	rtc->addr_base = res->start;
>  
> -	res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
> -	rtc->irq = irq_create_mapping(mt6397_chip->irq_domain, res->start);
> -	if (rtc->irq <= 0)
> -		return -EINVAL;
> +	rtc->irq = platform_get_irq(pdev, 0);
> +	if (rtc->irq < 0)
> +		return rtc->irq;
>  
>  	rtc->regmap = mt6397_chip->regmap;
>  	rtc->dev = &pdev->dev;
> -- 
> 1.7.9.5
> 

-- 
Alexandre Belloni, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com

[PATCH v3 1/5] mfd: mt6397: create irq mappings in mfd core driver

[Alexandre Belloni]

On 25/08/2017 at 14:32:29 +0800, Chen Zhong wrote:
> The core driver should create and manage irq mappings instead of
> leaf drivers. This patch change to pass irq domain to
> devm_mfd_add_devices() and it will create mapping for irq resources
> automatically. And remove irq mapping in rtc driver since this has
> been done in core driver.
> 
> Acked-for-MFD-by: Lee Jones <lee.jones@linaro.org>
> Signed-off-by: Chen Zhong <chen.zhong@mediatek.com>
Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>

> ---
>  drivers/mfd/mt6397-core.c |    4 ++--
>  drivers/rtc/rtc-mt6397.c  |    7 +++----
>  2 files changed, 5 insertions(+), 6 deletions(-)
> 
> diff --git a/drivers/mfd/mt6397-core.c b/drivers/mfd/mt6397-core.c
> index 04a601f..6546d7f 100644
> --- a/drivers/mfd/mt6397-core.c
> +++ b/drivers/mfd/mt6397-core.c
> @@ -289,7 +289,7 @@ static int mt6397_probe(struct platform_device *pdev)
>  
>  		ret = devm_mfd_add_devices(&pdev->dev, -1, mt6323_devs,
>  					   ARRAY_SIZE(mt6323_devs), NULL,
> -					   0, NULL);
> +					   0, pmic->irq_domain);
>  		break;
>  
>  	case MT6397_CID_CODE:
> @@ -304,7 +304,7 @@ static int mt6397_probe(struct platform_device *pdev)
>  
>  		ret = devm_mfd_add_devices(&pdev->dev, -1, mt6397_devs,
>  					   ARRAY_SIZE(mt6397_devs), NULL,
> -					   0, NULL);
> +					   0, pmic->irq_domain);
>  		break;
>  
>  	default:
> diff --git a/drivers/rtc/rtc-mt6397.c b/drivers/rtc/rtc-mt6397.c
> index 1a61fa5..385f830 100644
> --- a/drivers/rtc/rtc-mt6397.c
> +++ b/drivers/rtc/rtc-mt6397.c
> @@ -322,10 +322,9 @@ static int mtk_rtc_probe(struct platform_device *pdev)
>  	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
>  	rtc->addr_base = res->start;
>  
> -	res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
> -	rtc->irq = irq_create_mapping(mt6397_chip->irq_domain, res->start);
> -	if (rtc->irq <= 0)
> -		return -EINVAL;
> +	rtc->irq = platform_get_irq(pdev, 0);
> +	if (rtc->irq < 0)
> +		return rtc->irq;
>  
>  	rtc->regmap = mt6397_chip->regmap;
>  	rtc->dev = &pdev->dev;
> -- 
> 1.7.9.5
> 

-- 
Alexandre Belloni, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com

Re: [PATCH v3 0/5] Add MediaTek PMIC keys support

[Chen Zhong]

Sorry for missing the change history.

Changes since v2:
- use standard properties for keycodes and debounce time
- change to use platform_get_irq in leaf drivers
- use better ways to define IRQ resources

Changes since v1:
- create irq mappings in mfd core driver instead of leaf drivers
- remove some unused parts in mtk-pmic-keys driver

On Fri, 2017-08-25 at 14:32 +0800, Chen Zhong wrote:
> MediaTek PMIC are multi-function devices that can handle key interrupts,
> typically there are two keys attached to PMIC, which called pwrkey
> and homekey. PWRKEY usually used to wake up system from sleep. Homekey
> can used as volume down key due to board design. Long press keys can
> shutdown PMIC, the mode can be choose to be one key only or two keys
> together.
> This series add support for key functions for MediaTek PMIC MT6397/MT6323.
> 
> Chen Zhong (5):
>   mfd: mt6397: create irq mappings in mfd core driver
>   dt-bindings: input: Add document bindings for mtk-pmic-keys
>   dt-bindings: mfd: Add bindings for the keys as subnode of PMIC
>   input: Add MediaTek PMIC keys support
>   mfd: mt6397: Add PMIC keys support to MT6397 driver
> 
>  .../devicetree/bindings/input/mtk-pmic-keys.txt    |  38 +++
>  Documentation/devicetree/bindings/mfd/mt6397.txt   |   6 +
>  drivers/input/keyboard/Kconfig                     |   9 +
>  drivers/input/keyboard/Makefile                    |   1 +
>  drivers/input/keyboard/mtk-pmic-keys.c             | 308 +++++++++++++++++++++
>  drivers/mfd/mt6397-core.c                          |  26 +-
>  drivers/rtc/rtc-mt6397.c                           |   7 +-
>  7 files changed, 388 insertions(+), 7 deletions(-)
>  create mode 100644 Documentation/devicetree/bindings/input/mtk-pmic-keys.txt
>  create mode 100644 drivers/input/keyboard/mtk-pmic-keys.c
> 

Re: [PATCH v3 0/5] Add MediaTek PMIC keys support

[Chen Zhong]

Sorry for missing the change history.

Changes since v2:
- use standard properties for keycodes and debounce time
- change to use platform_get_irq in leaf drivers
- use better ways to define IRQ resources

Changes since v1:
- create irq mappings in mfd core driver instead of leaf drivers
- remove some unused parts in mtk-pmic-keys driver

On Fri, 2017-08-25 at 14:32 +0800, Chen Zhong wrote:
> MediaTek PMIC are multi-function devices that can handle key interrupts,
> typically there are two keys attached to PMIC, which called pwrkey
> and homekey. PWRKEY usually used to wake up system from sleep. Homekey
> can used as volume down key due to board design. Long press keys can
> shutdown PMIC, the mode can be choose to be one key only or two keys
> together.
> This series add support for key functions for MediaTek PMIC MT6397/MT6323.
> 
> Chen Zhong (5):
>   mfd: mt6397: create irq mappings in mfd core driver
>   dt-bindings: input: Add document bindings for mtk-pmic-keys
>   dt-bindings: mfd: Add bindings for the keys as subnode of PMIC
>   input: Add MediaTek PMIC keys support
>   mfd: mt6397: Add PMIC keys support to MT6397 driver
> 
>  .../devicetree/bindings/input/mtk-pmic-keys.txt    |  38 +++
>  Documentation/devicetree/bindings/mfd/mt6397.txt   |   6 +
>  drivers/input/keyboard/Kconfig                     |   9 +
>  drivers/input/keyboard/Makefile                    |   1 +
>  drivers/input/keyboard/mtk-pmic-keys.c             | 308 +++++++++++++++++++++
>  drivers/mfd/mt6397-core.c                          |  26 +-
>  drivers/rtc/rtc-mt6397.c                           |   7 +-
>  7 files changed, 388 insertions(+), 7 deletions(-)
>  create mode 100644 Documentation/devicetree/bindings/input/mtk-pmic-keys.txt
>  create mode 100644 drivers/input/keyboard/mtk-pmic-keys.c
> 


--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH v3 0/5] Add MediaTek PMIC keys support

[Chen Zhong]

Sorry for missing the change history.

Changes since v2:
- use standard properties for keycodes and debounce time
- change to use platform_get_irq in leaf drivers
- use better ways to define IRQ resources

Changes since v1:
- create irq mappings in mfd core driver instead of leaf drivers
- remove some unused parts in mtk-pmic-keys driver

On Fri, 2017-08-25 at 14:32 +0800, Chen Zhong wrote:
> MediaTek PMIC are multi-function devices that can handle key interrupts,
> typically there are two keys attached to PMIC, which called pwrkey
> and homekey. PWRKEY usually used to wake up system from sleep. Homekey
> can used as volume down key due to board design. Long press keys can
> shutdown PMIC, the mode can be choose to be one key only or two keys
> together.
> This series add support for key functions for MediaTek PMIC MT6397/MT6323.
> 
> Chen Zhong (5):
>   mfd: mt6397: create irq mappings in mfd core driver
>   dt-bindings: input: Add document bindings for mtk-pmic-keys
>   dt-bindings: mfd: Add bindings for the keys as subnode of PMIC
>   input: Add MediaTek PMIC keys support
>   mfd: mt6397: Add PMIC keys support to MT6397 driver
> 
>  .../devicetree/bindings/input/mtk-pmic-keys.txt    |  38 +++
>  Documentation/devicetree/bindings/mfd/mt6397.txt   |   6 +
>  drivers/input/keyboard/Kconfig                     |   9 +
>  drivers/input/keyboard/Makefile                    |   1 +
>  drivers/input/keyboard/mtk-pmic-keys.c             | 308 +++++++++++++++++++++
>  drivers/mfd/mt6397-core.c                          |  26 +-
>  drivers/rtc/rtc-mt6397.c                           |   7 +-
>  7 files changed, 388 insertions(+), 7 deletions(-)
>  create mode 100644 Documentation/devicetree/bindings/input/mtk-pmic-keys.txt
>  create mode 100644 drivers/input/keyboard/mtk-pmic-keys.c
> 

Re: [PATCH v3 4/5] input: Add MediaTek PMIC keys support

[Dmitry Torokhov]

Hi Chen,

On Fri, Aug 25, 2017 at 02:32:32PM +0800, Chen Zhong wrote:
> +static int mtk_pmic_key_setup(struct mtk_pmic_keys *keys,
> +		struct pmic_keys_info *info)
> +{
> +	int ret;
> +
> +	info->keys = keys;
> +
> +	ret = regmap_update_bits(keys->regmap, info->regs->intsel_reg,
> +				 info->regs->intsel_mask,
> +				 info->regs->intsel_mask);
> +	if (ret < 0)
> +		return ret;
> +
> +	ret = devm_request_threaded_irq(keys->dev, info->irq, NULL,
> +					mtk_pmic_keys_irq_handler_thread,
> +					IRQF_ONESHOT | IRQF_TRIGGER_HIGH,
> +					"mtk-pmic-keys", info);
> +	if (ret) {
> +		dev_err(keys->dev, "Failed to request IRQ: %d: %d\n",
> +			info->irq, ret);
> +		return ret;
> +	}
> +
> +	if (info->wakeup)
> +		irq_set_irq_wake(info->irq, 1);

Normally we do this in suspend() (and undo in resume()), and I believe
the drover API is enable_irq_wake() and disable_irq_wake().

Thanks.

-- 
Dmitry

[PATCH v3 4/5] input: Add MediaTek PMIC keys support

[Dmitry Torokhov]

Hi Chen,

On Fri, Aug 25, 2017 at 02:32:32PM +0800, Chen Zhong wrote:
> +static int mtk_pmic_key_setup(struct mtk_pmic_keys *keys,
> +		struct pmic_keys_info *info)
> +{
> +	int ret;
> +
> +	info->keys = keys;
> +
> +	ret = regmap_update_bits(keys->regmap, info->regs->intsel_reg,
> +				 info->regs->intsel_mask,
> +				 info->regs->intsel_mask);
> +	if (ret < 0)
> +		return ret;
> +
> +	ret = devm_request_threaded_irq(keys->dev, info->irq, NULL,
> +					mtk_pmic_keys_irq_handler_thread,
> +					IRQF_ONESHOT | IRQF_TRIGGER_HIGH,
> +					"mtk-pmic-keys", info);
> +	if (ret) {
> +		dev_err(keys->dev, "Failed to request IRQ: %d: %d\n",
> +			info->irq, ret);
> +		return ret;
> +	}
> +
> +	if (info->wakeup)
> +		irq_set_irq_wake(info->irq, 1);

Normally we do this in suspend() (and undo in resume()), and I believe
the drover API is enable_irq_wake() and disable_irq_wake().

Thanks.

-- 
Dmitry

Re: [PATCH v3 4/5] input: Add MediaTek PMIC keys support

[Chen Zhong]

On Mon, 2017-08-28 at 09:57 -0700, Dmitry Torokhov wrote:
> Hi Chen,
> 
> On Fri, Aug 25, 2017 at 02:32:32PM +0800, Chen Zhong wrote:
> > +static int mtk_pmic_key_setup(struct mtk_pmic_keys *keys,
> > +		struct pmic_keys_info *info)
> > +{
> > +	int ret;
> > +
> > +	info->keys = keys;
> > +
> > +	ret = regmap_update_bits(keys->regmap, info->regs->intsel_reg,
> > +				 info->regs->intsel_mask,
> > +				 info->regs->intsel_mask);
> > +	if (ret < 0)
> > +		return ret;
> > +
> > +	ret = devm_request_threaded_irq(keys->dev, info->irq, NULL,
> > +					mtk_pmic_keys_irq_handler_thread,
> > +					IRQF_ONESHOT | IRQF_TRIGGER_HIGH,
> > +					"mtk-pmic-keys", info);
> > +	if (ret) {
> > +		dev_err(keys->dev, "Failed to request IRQ: %d: %d\n",
> > +			info->irq, ret);
> > +		return ret;
> > +	}
> > +
> > +	if (info->wakeup)
> > +		irq_set_irq_wake(info->irq, 1);
> 
> Normally we do this in suspend() (and undo in resume()), and I believe
> the drover API is enable_irq_wake() and disable_irq_wake().
> 

Hi Dmitry,

I'll add suspend/resume callback functions and do this with
enable_irq_wake() and disable_irq_wake().

Thank you.


> Thanks.
> 

Re: [PATCH v3 4/5] input: Add MediaTek PMIC keys support

[Chen Zhong]

On Mon, 2017-08-28 at 09:57 -0700, Dmitry Torokhov wrote:
> Hi Chen,
> 
> On Fri, Aug 25, 2017 at 02:32:32PM +0800, Chen Zhong wrote:
> > +static int mtk_pmic_key_setup(struct mtk_pmic_keys *keys,
> > +		struct pmic_keys_info *info)
> > +{
> > +	int ret;
> > +
> > +	info->keys = keys;
> > +
> > +	ret = regmap_update_bits(keys->regmap, info->regs->intsel_reg,
> > +				 info->regs->intsel_mask,
> > +				 info->regs->intsel_mask);
> > +	if (ret < 0)
> > +		return ret;
> > +
> > +	ret = devm_request_threaded_irq(keys->dev, info->irq, NULL,
> > +					mtk_pmic_keys_irq_handler_thread,
> > +					IRQF_ONESHOT | IRQF_TRIGGER_HIGH,
> > +					"mtk-pmic-keys", info);
> > +	if (ret) {
> > +		dev_err(keys->dev, "Failed to request IRQ: %d: %d\n",
> > +			info->irq, ret);
> > +		return ret;
> > +	}
> > +
> > +	if (info->wakeup)
> > +		irq_set_irq_wake(info->irq, 1);
> 
> Normally we do this in suspend() (and undo in resume()), and I believe
> the drover API is enable_irq_wake() and disable_irq_wake().
> 

Hi Dmitry,

I'll add suspend/resume callback functions and do this with
enable_irq_wake() and disable_irq_wake().

Thank you.


> Thanks.
> 

[PATCH v3 4/5] input: Add MediaTek PMIC keys support

[Chen Zhong]

On Mon, 2017-08-28 at 09:57 -0700, Dmitry Torokhov wrote:
> Hi Chen,
> 
> On Fri, Aug 25, 2017 at 02:32:32PM +0800, Chen Zhong wrote:
> > +static int mtk_pmic_key_setup(struct mtk_pmic_keys *keys,
> > +		struct pmic_keys_info *info)
> > +{
> > +	int ret;
> > +
> > +	info->keys = keys;
> > +
> > +	ret = regmap_update_bits(keys->regmap, info->regs->intsel_reg,
> > +				 info->regs->intsel_mask,
> > +				 info->regs->intsel_mask);
> > +	if (ret < 0)
> > +		return ret;
> > +
> > +	ret = devm_request_threaded_irq(keys->dev, info->irq, NULL,
> > +					mtk_pmic_keys_irq_handler_thread,
> > +					IRQF_ONESHOT | IRQF_TRIGGER_HIGH,
> > +					"mtk-pmic-keys", info);
> > +	if (ret) {
> > +		dev_err(keys->dev, "Failed to request IRQ: %d: %d\n",
> > +			info->irq, ret);
> > +		return ret;
> > +	}
> > +
> > +	if (info->wakeup)
> > +		irq_set_irq_wake(info->irq, 1);
> 
> Normally we do this in suspend() (and undo in resume()), and I believe
> the drover API is enable_irq_wake() and disable_irq_wake().
> 

Hi Dmitry,

I'll add suspend/resume callback functions and do this with
enable_irq_wake() and disable_irq_wake().

Thank you.


> Thanks.
> 

Re: [PATCH v3 4/5] input: Add MediaTek PMIC keys support

[Andi Shyti]

Hi Chen,

what I would ask you is to be consistent with the naming, if your
driver is called mtk-pmic, then all your functions and global
variables should be named accordingly as mtk_pmic or MTK_PMIC.
Please check in between the lines for real examples:

> +#define PWRKEY_RST_EN_MASK	0x1
> +#define PWRKEY_RST_EN_SHIFT	6
> +#define HOMEKEY_RST_EN_MASK	0x1
> +#define HOMEKEY_RST_EN_SHIFT	5
> +#define RST_DU_MASK		0x3
> +#define RST_DU_SHIFT		8
> +
> +#define PMIC_PWRKEY_INDEX	0
> +#define PMIC_HOMEKEY_INDEX	1
> +#define PMIC_MAX_KEY_COUNT	2

#define MTK_PMIC_*

> +struct pmic_keys_regs {

struct mtk_pmic_keys_regs

> +	u32 deb_reg;
> +	u32 deb_mask;
> +	u32 intsel_reg;
> +	u32 intsel_mask;
> +};
> +
> +#define PMIC_KEYS_REGS(_deb_reg, _deb_mask, _intsel_reg, _intsel_mask)	\

MTK_PMIC_KEYS_REGS

> +{									\
> +	.deb_reg		= _deb_reg,				\
> +	.deb_mask		= _deb_mask,				\
> +	.intsel_reg		= _intsel_reg,				\
> +	.intsel_mask		= _intsel_mask,				\
> +}
> +
> +struct pmic_regs {

mtk_pmic_regs

and so on... you got the point.

Andi

[PATCH v3 4/5] input: Add MediaTek PMIC keys support

[Andi Shyti]

Hi Chen,

what I would ask you is to be consistent with the naming, if your
driver is called mtk-pmic, then all your functions and global
variables should be named accordingly as mtk_pmic or MTK_PMIC.
Please check in between the lines for real examples:

> +#define PWRKEY_RST_EN_MASK	0x1
> +#define PWRKEY_RST_EN_SHIFT	6
> +#define HOMEKEY_RST_EN_MASK	0x1
> +#define HOMEKEY_RST_EN_SHIFT	5
> +#define RST_DU_MASK		0x3
> +#define RST_DU_SHIFT		8
> +
> +#define PMIC_PWRKEY_INDEX	0
> +#define PMIC_HOMEKEY_INDEX	1
> +#define PMIC_MAX_KEY_COUNT	2

#define MTK_PMIC_*

> +struct pmic_keys_regs {

struct mtk_pmic_keys_regs

> +	u32 deb_reg;
> +	u32 deb_mask;
> +	u32 intsel_reg;
> +	u32 intsel_mask;
> +};
> +
> +#define PMIC_KEYS_REGS(_deb_reg, _deb_mask, _intsel_reg, _intsel_mask)	\

MTK_PMIC_KEYS_REGS

> +{									\
> +	.deb_reg		= _deb_reg,				\
> +	.deb_mask		= _deb_mask,				\
> +	.intsel_reg		= _intsel_reg,				\
> +	.intsel_mask		= _intsel_mask,				\
> +}
> +
> +struct pmic_regs {

mtk_pmic_regs

and so on... you got the point.

Andi

Re: [PATCH v3 4/5] input: Add MediaTek PMIC keys support

[Chen Zhong]

Hi Andi,

Sorry for that, i deleted some prefix since the namings will be such
long. If this should be consistent, I'll check and modify them in the
next version.

Thank you.

On Tue, 2017-08-29 at 16:34 +0900, Andi Shyti wrote:
> Hi Chen,
> 
> what I would ask you is to be consistent with the naming, if your
> driver is called mtk-pmic, then all your functions and global
> variables should be named accordingly as mtk_pmic or MTK_PMIC.
> Please check in between the lines for real examples:
> 
> > +#define PWRKEY_RST_EN_MASK	0x1
> > +#define PWRKEY_RST_EN_SHIFT	6
> > +#define HOMEKEY_RST_EN_MASK	0x1
> > +#define HOMEKEY_RST_EN_SHIFT	5
> > +#define RST_DU_MASK		0x3
> > +#define RST_DU_SHIFT		8
> > +
> > +#define PMIC_PWRKEY_INDEX	0
> > +#define PMIC_HOMEKEY_INDEX	1
> > +#define PMIC_MAX_KEY_COUNT	2
> 
> #define MTK_PMIC_*
> 
> > +struct pmic_keys_regs {
> 
> struct mtk_pmic_keys_regs
> 
> > +	u32 deb_reg;
> > +	u32 deb_mask;
> > +	u32 intsel_reg;
> > +	u32 intsel_mask;
> > +};
> > +
> > +#define PMIC_KEYS_REGS(_deb_reg, _deb_mask, _intsel_reg, _intsel_mask)	\
> 
> MTK_PMIC_KEYS_REGS
> 
> > +{									\
> > +	.deb_reg		= _deb_reg,				\
> > +	.deb_mask		= _deb_mask,				\
> > +	.intsel_reg		= _intsel_reg,				\
> > +	.intsel_mask		= _intsel_mask,				\
> > +}
> > +
> > +struct pmic_regs {
> 
> mtk_pmic_regs
> 
> and so on... you got the point.
> 
> Andi

Re: [PATCH v3 4/5] input: Add MediaTek PMIC keys support

[Chen Zhong]

Hi Andi,

Sorry for that, i deleted some prefix since the namings will be such
long. If this should be consistent, I'll check and modify them in the
next version.

Thank you.

On Tue, 2017-08-29 at 16:34 +0900, Andi Shyti wrote:
> Hi Chen,
> 
> what I would ask you is to be consistent with the naming, if your
> driver is called mtk-pmic, then all your functions and global
> variables should be named accordingly as mtk_pmic or MTK_PMIC.
> Please check in between the lines for real examples:
> 
> > +#define PWRKEY_RST_EN_MASK	0x1
> > +#define PWRKEY_RST_EN_SHIFT	6
> > +#define HOMEKEY_RST_EN_MASK	0x1
> > +#define HOMEKEY_RST_EN_SHIFT	5
> > +#define RST_DU_MASK		0x3
> > +#define RST_DU_SHIFT		8
> > +
> > +#define PMIC_PWRKEY_INDEX	0
> > +#define PMIC_HOMEKEY_INDEX	1
> > +#define PMIC_MAX_KEY_COUNT	2
> 
> #define MTK_PMIC_*
> 
> > +struct pmic_keys_regs {
> 
> struct mtk_pmic_keys_regs
> 
> > +	u32 deb_reg;
> > +	u32 deb_mask;
> > +	u32 intsel_reg;
> > +	u32 intsel_mask;
> > +};
> > +
> > +#define PMIC_KEYS_REGS(_deb_reg, _deb_mask, _intsel_reg, _intsel_mask)	\
> 
> MTK_PMIC_KEYS_REGS
> 
> > +{									\
> > +	.deb_reg		= _deb_reg,				\
> > +	.deb_mask		= _deb_mask,				\
> > +	.intsel_reg		= _intsel_reg,				\
> > +	.intsel_mask		= _intsel_mask,				\
> > +}
> > +
> > +struct pmic_regs {
> 
> mtk_pmic_regs
> 
> and so on... you got the point.
> 
> Andi

[PATCH v3 4/5] input: Add MediaTek PMIC keys support

[Chen Zhong]

Hi Andi,

Sorry for that, i deleted some prefix since the namings will be such
long. If this should be consistent, I'll check and modify them in the
next version.

Thank you.

On Tue, 2017-08-29 at 16:34 +0900, Andi Shyti wrote:
> Hi Chen,
> 
> what I would ask you is to be consistent with the naming, if your
> driver is called mtk-pmic, then all your functions and global
> variables should be named accordingly as mtk_pmic or MTK_PMIC.
> Please check in between the lines for real examples:
> 
> > +#define PWRKEY_RST_EN_MASK	0x1
> > +#define PWRKEY_RST_EN_SHIFT	6
> > +#define HOMEKEY_RST_EN_MASK	0x1
> > +#define HOMEKEY_RST_EN_SHIFT	5
> > +#define RST_DU_MASK		0x3
> > +#define RST_DU_SHIFT		8
> > +
> > +#define PMIC_PWRKEY_INDEX	0
> > +#define PMIC_HOMEKEY_INDEX	1
> > +#define PMIC_MAX_KEY_COUNT	2
> 
> #define MTK_PMIC_*
> 
> > +struct pmic_keys_regs {
> 
> struct mtk_pmic_keys_regs
> 
> > +	u32 deb_reg;
> > +	u32 deb_mask;
> > +	u32 intsel_reg;
> > +	u32 intsel_mask;
> > +};
> > +
> > +#define PMIC_KEYS_REGS(_deb_reg, _deb_mask, _intsel_reg, _intsel_mask)	\
> 
> MTK_PMIC_KEYS_REGS
> 
> > +{									\
> > +	.deb_reg		= _deb_reg,				\
> > +	.deb_mask		= _deb_mask,				\
> > +	.intsel_reg		= _intsel_reg,				\
> > +	.intsel_mask		= _intsel_mask,				\
> > +}
> > +
> > +struct pmic_regs {
> 
> mtk_pmic_regs
> 
> and so on... you got the point.
> 
> Andi

Re: [PATCH v3 2/5] dt-bindings: input: Add document bindings for mtk-pmic-keys

[Rob Herring]

On Fri, Aug 25, 2017 at 02:32:30PM +0800, Chen Zhong wrote:
> This patch adds the device tree binding documentation for the MediaTek
> pmic keys found on PMIC MT6397/MT6323.
> 
> Signed-off-by: Chen Zhong <chen.zhong@mediatek.com>
> ---
>  .../devicetree/bindings/input/mtk-pmic-keys.txt    |   38 ++++++++++++++++++++
>  1 file changed, 38 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/input/mtk-pmic-keys.txt
> 
> diff --git a/Documentation/devicetree/bindings/input/mtk-pmic-keys.txt b/Documentation/devicetree/bindings/input/mtk-pmic-keys.txt
> new file mode 100644
> index 0000000..100ec44
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/input/mtk-pmic-keys.txt
> @@ -0,0 +1,38 @@
> +MediaTek MT6397/MT6323 PMIC Keys Device Driver
> +
> +There are two key functions provided by MT6397/MT6323 PMIC, pwrkey
> +and homekey. The key functions are defined as the subnode of the function
> +node provided by MT6397/MT6323 PMIC that is being defined as one kind
> +of Muti-Function Device (MFD)
> +
> +For MT6397/MT6323 MFD bindings see:
> +Documentation/devicetree/bindings/mfd/mt6397.txt
> +
> +Required properties:
> +- compatible: "mediatek,mt6397-keys" or "mediatek,mt6323-keys"
> +- linux,keycodes: Specifies the numeric keycode values to
> +	be used for reporting keys presses. The array can
> +	contain up to 2 entries.
> +
> +Optional Properties:
> +- wakeup-source: each key can be used as a wakeup source.

wakeup-source is defined as a boolean.

> +- mediatek,long-press-mode: Long press key shutdown setting, 1 for
> +	pwrkey only, 2 for pwrkey/homekey together, others for disabled.
> +- debounce-interval: Long press key shutdown debouncing interval time
> +	in seconds. 0/1/2/3 for 8/11/14/5 seconds. If not specified defaults to 0.
> +
> +Example:
> +
> +	pmic: mt6397 {
> +		compatible = "mediatek,mt6397";
> +
> +		...
> +
> +		mt6397keys: mt6397keys {
> +			compatible = "mediatek,mt6397-keys";
> +			linux,keycodes = <KEY_POWER>, <KEY_VOLUMEDOWN>;
> +			wakeup-source = <1>, <0>;
> +			mediatek,long-press-mode = <1>;
> +			debounce-interval = <0>;
> +		};
> +	};
> -- 
> 1.7.9.5
> 

Re: [PATCH v3 2/5] dt-bindings: input: Add document bindings for mtk-pmic-keys

[Rob Herring]

On Fri, Aug 25, 2017 at 02:32:30PM +0800, Chen Zhong wrote:
> This patch adds the device tree binding documentation for the MediaTek
> pmic keys found on PMIC MT6397/MT6323.
> 
> Signed-off-by: Chen Zhong <chen.zhong-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>
> ---
>  .../devicetree/bindings/input/mtk-pmic-keys.txt    |   38 ++++++++++++++++++++
>  1 file changed, 38 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/input/mtk-pmic-keys.txt
> 
> diff --git a/Documentation/devicetree/bindings/input/mtk-pmic-keys.txt b/Documentation/devicetree/bindings/input/mtk-pmic-keys.txt
> new file mode 100644
> index 0000000..100ec44
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/input/mtk-pmic-keys.txt
> @@ -0,0 +1,38 @@
> +MediaTek MT6397/MT6323 PMIC Keys Device Driver
> +
> +There are two key functions provided by MT6397/MT6323 PMIC, pwrkey
> +and homekey. The key functions are defined as the subnode of the function
> +node provided by MT6397/MT6323 PMIC that is being defined as one kind
> +of Muti-Function Device (MFD)
> +
> +For MT6397/MT6323 MFD bindings see:
> +Documentation/devicetree/bindings/mfd/mt6397.txt
> +
> +Required properties:
> +- compatible: "mediatek,mt6397-keys" or "mediatek,mt6323-keys"
> +- linux,keycodes: Specifies the numeric keycode values to
> +	be used for reporting keys presses. The array can
> +	contain up to 2 entries.
> +
> +Optional Properties:
> +- wakeup-source: each key can be used as a wakeup source.

wakeup-source is defined as a boolean.

> +- mediatek,long-press-mode: Long press key shutdown setting, 1 for
> +	pwrkey only, 2 for pwrkey/homekey together, others for disabled.
> +- debounce-interval: Long press key shutdown debouncing interval time
> +	in seconds. 0/1/2/3 for 8/11/14/5 seconds. If not specified defaults to 0.
> +
> +Example:
> +
> +	pmic: mt6397 {
> +		compatible = "mediatek,mt6397";
> +
> +		...
> +
> +		mt6397keys: mt6397keys {
> +			compatible = "mediatek,mt6397-keys";
> +			linux,keycodes = <KEY_POWER>, <KEY_VOLUMEDOWN>;
> +			wakeup-source = <1>, <0>;
> +			mediatek,long-press-mode = <1>;
> +			debounce-interval = <0>;
> +		};
> +	};
> -- 
> 1.7.9.5
> 
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH v3 2/5] dt-bindings: input: Add document bindings for mtk-pmic-keys

[Rob Herring]

On Fri, Aug 25, 2017 at 02:32:30PM +0800, Chen Zhong wrote:
> This patch adds the device tree binding documentation for the MediaTek
> pmic keys found on PMIC MT6397/MT6323.
> 
> Signed-off-by: Chen Zhong <chen.zhong@mediatek.com>
> ---
>  .../devicetree/bindings/input/mtk-pmic-keys.txt    |   38 ++++++++++++++++++++
>  1 file changed, 38 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/input/mtk-pmic-keys.txt
> 
> diff --git a/Documentation/devicetree/bindings/input/mtk-pmic-keys.txt b/Documentation/devicetree/bindings/input/mtk-pmic-keys.txt
> new file mode 100644
> index 0000000..100ec44
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/input/mtk-pmic-keys.txt
> @@ -0,0 +1,38 @@
> +MediaTek MT6397/MT6323 PMIC Keys Device Driver
> +
> +There are two key functions provided by MT6397/MT6323 PMIC, pwrkey
> +and homekey. The key functions are defined as the subnode of the function
> +node provided by MT6397/MT6323 PMIC that is being defined as one kind
> +of Muti-Function Device (MFD)
> +
> +For MT6397/MT6323 MFD bindings see:
> +Documentation/devicetree/bindings/mfd/mt6397.txt
> +
> +Required properties:
> +- compatible: "mediatek,mt6397-keys" or "mediatek,mt6323-keys"
> +- linux,keycodes: Specifies the numeric keycode values to
> +	be used for reporting keys presses. The array can
> +	contain up to 2 entries.
> +
> +Optional Properties:
> +- wakeup-source: each key can be used as a wakeup source.

wakeup-source is defined as a boolean.

> +- mediatek,long-press-mode: Long press key shutdown setting, 1 for
> +	pwrkey only, 2 for pwrkey/homekey together, others for disabled.
> +- debounce-interval: Long press key shutdown debouncing interval time
> +	in seconds. 0/1/2/3 for 8/11/14/5 seconds. If not specified defaults to 0.
> +
> +Example:
> +
> +	pmic: mt6397 {
> +		compatible = "mediatek,mt6397";
> +
> +		...
> +
> +		mt6397keys: mt6397keys {
> +			compatible = "mediatek,mt6397-keys";
> +			linux,keycodes = <KEY_POWER>, <KEY_VOLUMEDOWN>;
> +			wakeup-source = <1>, <0>;
> +			mediatek,long-press-mode = <1>;
> +			debounce-interval = <0>;
> +		};
> +	};
> -- 
> 1.7.9.5
> 

Re: [PATCH v3 2/5] dt-bindings: input: Add document bindings for mtk-pmic-keys

[Chen Zhong]

On Thu, 2017-08-31 at 14:52 -0500, Rob Herring wrote:
> On Fri, Aug 25, 2017 at 02:32:30PM +0800, Chen Zhong wrote:
> > This patch adds the device tree binding documentation for the MediaTek
> > pmic keys found on PMIC MT6397/MT6323.
> > 
> > Signed-off-by: Chen Zhong <chen.zhong@mediatek.com>
> > ---
> >  .../devicetree/bindings/input/mtk-pmic-keys.txt    |   38 ++++++++++++++++++++
> >  1 file changed, 38 insertions(+)
> >  create mode 100644 Documentation/devicetree/bindings/input/mtk-pmic-keys.txt
> > 
> > diff --git a/Documentation/devicetree/bindings/input/mtk-pmic-keys.txt b/Documentation/devicetree/bindings/input/mtk-pmic-keys.txt
> > new file mode 100644
> > index 0000000..100ec44
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/input/mtk-pmic-keys.txt
> > @@ -0,0 +1,38 @@
> > +MediaTek MT6397/MT6323 PMIC Keys Device Driver
> > +
> > +There are two key functions provided by MT6397/MT6323 PMIC, pwrkey
> > +and homekey. The key functions are defined as the subnode of the function
> > +node provided by MT6397/MT6323 PMIC that is being defined as one kind
> > +of Muti-Function Device (MFD)
> > +
> > +For MT6397/MT6323 MFD bindings see:
> > +Documentation/devicetree/bindings/mfd/mt6397.txt
> > +
> > +Required properties:
> > +- compatible: "mediatek,mt6397-keys" or "mediatek,mt6323-keys"
> > +- linux,keycodes: Specifies the numeric keycode values to
> > +	be used for reporting keys presses. The array can
> > +	contain up to 2 entries.
> > +
> > +Optional Properties:
> > +- wakeup-source: each key can be used as a wakeup source.
> 
> wakeup-source is defined as a boolean.

Hi Rob,

We have two keys, maybe one key can be used as a wakeup source, another
not.Since wakeup-source is defined as a boolean, we cannot distinguish
the behavior of the two keys. May i know the better way to do this?

Thank you.
> 
> > +- mediatek,long-press-mode: Long press key shutdown setting, 1 for
> > +	pwrkey only, 2 for pwrkey/homekey together, others for disabled.
> > +- debounce-interval: Long press key shutdown debouncing interval time
> > +	in seconds. 0/1/2/3 for 8/11/14/5 seconds. If not specified defaults to 0.
> > +
> > +Example:
> > +
> > +	pmic: mt6397 {
> > +		compatible = "mediatek,mt6397";
> > +
> > +		...
> > +
> > +		mt6397keys: mt6397keys {
> > +			compatible = "mediatek,mt6397-keys";
> > +			linux,keycodes = <KEY_POWER>, <KEY_VOLUMEDOWN>;
> > +			wakeup-source = <1>, <0>;
> > +			mediatek,long-press-mode = <1>;
> > +			debounce-interval = <0>;
> > +		};
> > +	};
> > -- 
> > 1.7.9.5
> > 

Re: [PATCH v3 2/5] dt-bindings: input: Add document bindings for mtk-pmic-keys

[Chen Zhong]

On Thu, 2017-08-31 at 14:52 -0500, Rob Herring wrote:
> On Fri, Aug 25, 2017 at 02:32:30PM +0800, Chen Zhong wrote:
> > This patch adds the device tree binding documentation for the MediaTek
> > pmic keys found on PMIC MT6397/MT6323.
> > 
> > Signed-off-by: Chen Zhong <chen.zhong@mediatek.com>
> > ---
> >  .../devicetree/bindings/input/mtk-pmic-keys.txt    |   38 ++++++++++++++++++++
> >  1 file changed, 38 insertions(+)
> >  create mode 100644 Documentation/devicetree/bindings/input/mtk-pmic-keys.txt
> > 
> > diff --git a/Documentation/devicetree/bindings/input/mtk-pmic-keys.txt b/Documentation/devicetree/bindings/input/mtk-pmic-keys.txt
> > new file mode 100644
> > index 0000000..100ec44
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/input/mtk-pmic-keys.txt
> > @@ -0,0 +1,38 @@
> > +MediaTek MT6397/MT6323 PMIC Keys Device Driver
> > +
> > +There are two key functions provided by MT6397/MT6323 PMIC, pwrkey
> > +and homekey. The key functions are defined as the subnode of the function
> > +node provided by MT6397/MT6323 PMIC that is being defined as one kind
> > +of Muti-Function Device (MFD)
> > +
> > +For MT6397/MT6323 MFD bindings see:
> > +Documentation/devicetree/bindings/mfd/mt6397.txt
> > +
> > +Required properties:
> > +- compatible: "mediatek,mt6397-keys" or "mediatek,mt6323-keys"
> > +- linux,keycodes: Specifies the numeric keycode values to
> > +	be used for reporting keys presses. The array can
> > +	contain up to 2 entries.
> > +
> > +Optional Properties:
> > +- wakeup-source: each key can be used as a wakeup source.
> 
> wakeup-source is defined as a boolean.

Hi Rob,

We have two keys, maybe one key can be used as a wakeup source, another
not.Since wakeup-source is defined as a boolean, we cannot distinguish
the behavior of the two keys. May i know the better way to do this?

Thank you.
> 
> > +- mediatek,long-press-mode: Long press key shutdown setting, 1 for
> > +	pwrkey only, 2 for pwrkey/homekey together, others for disabled.
> > +- debounce-interval: Long press key shutdown debouncing interval time
> > +	in seconds. 0/1/2/3 for 8/11/14/5 seconds. If not specified defaults to 0.
> > +
> > +Example:
> > +
> > +	pmic: mt6397 {
> > +		compatible = "mediatek,mt6397";
> > +
> > +		...
> > +
> > +		mt6397keys: mt6397keys {
> > +			compatible = "mediatek,mt6397-keys";
> > +			linux,keycodes = <KEY_POWER>, <KEY_VOLUMEDOWN>;
> > +			wakeup-source = <1>, <0>;
> > +			mediatek,long-press-mode = <1>;
> > +			debounce-interval = <0>;
> > +		};
> > +	};
> > -- 
> > 1.7.9.5
> > 

[PATCH v3 2/5] dt-bindings: input: Add document bindings for mtk-pmic-keys

[Chen Zhong]

On Thu, 2017-08-31 at 14:52 -0500, Rob Herring wrote:
> On Fri, Aug 25, 2017 at 02:32:30PM +0800, Chen Zhong wrote:
> > This patch adds the device tree binding documentation for the MediaTek
> > pmic keys found on PMIC MT6397/MT6323.
> > 
> > Signed-off-by: Chen Zhong <chen.zhong@mediatek.com>
> > ---
> >  .../devicetree/bindings/input/mtk-pmic-keys.txt    |   38 ++++++++++++++++++++
> >  1 file changed, 38 insertions(+)
> >  create mode 100644 Documentation/devicetree/bindings/input/mtk-pmic-keys.txt
> > 
> > diff --git a/Documentation/devicetree/bindings/input/mtk-pmic-keys.txt b/Documentation/devicetree/bindings/input/mtk-pmic-keys.txt
> > new file mode 100644
> > index 0000000..100ec44
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/input/mtk-pmic-keys.txt
> > @@ -0,0 +1,38 @@
> > +MediaTek MT6397/MT6323 PMIC Keys Device Driver
> > +
> > +There are two key functions provided by MT6397/MT6323 PMIC, pwrkey
> > +and homekey. The key functions are defined as the subnode of the function
> > +node provided by MT6397/MT6323 PMIC that is being defined as one kind
> > +of Muti-Function Device (MFD)
> > +
> > +For MT6397/MT6323 MFD bindings see:
> > +Documentation/devicetree/bindings/mfd/mt6397.txt
> > +
> > +Required properties:
> > +- compatible: "mediatek,mt6397-keys" or "mediatek,mt6323-keys"
> > +- linux,keycodes: Specifies the numeric keycode values to
> > +	be used for reporting keys presses. The array can
> > +	contain up to 2 entries.
> > +
> > +Optional Properties:
> > +- wakeup-source: each key can be used as a wakeup source.
> 
> wakeup-source is defined as a boolean.

Hi Rob,

We have two keys, maybe one key can be used as a wakeup source, another
not.Since wakeup-source is defined as a boolean, we cannot distinguish
the behavior of the two keys. May i know the better way to do this?

Thank you.
> 
> > +- mediatek,long-press-mode: Long press key shutdown setting, 1 for
> > +	pwrkey only, 2 for pwrkey/homekey together, others for disabled.
> > +- debounce-interval: Long press key shutdown debouncing interval time
> > +	in seconds. 0/1/2/3 for 8/11/14/5 seconds. If not specified defaults to 0.
> > +
> > +Example:
> > +
> > +	pmic: mt6397 {
> > +		compatible = "mediatek,mt6397";
> > +
> > +		...
> > +
> > +		mt6397keys: mt6397keys {
> > +			compatible = "mediatek,mt6397-keys";
> > +			linux,keycodes = <KEY_POWER>, <KEY_VOLUMEDOWN>;
> > +			wakeup-source = <1>, <0>;
> > +			mediatek,long-press-mode = <1>;
> > +			debounce-interval = <0>;
> > +		};
> > +	};
> > -- 
> > 1.7.9.5
> > 

Re: [PATCH v3 2/5] dt-bindings: input: Add document bindings for mtk-pmic-keys

[Chen Zhong]

On Thu, 2017-08-31 at 14:52 -0500, Rob Herring wrote:
> On Fri, Aug 25, 2017 at 02:32:30PM +0800, Chen Zhong wrote:
> > This patch adds the device tree binding documentation for the MediaTek
> > pmic keys found on PMIC MT6397/MT6323.
> > 
> > Signed-off-by: Chen Zhong <chen.zhong@mediatek.com>
> > ---
> >  .../devicetree/bindings/input/mtk-pmic-keys.txt    |   38 ++++++++++++++++++++
> >  1 file changed, 38 insertions(+)
> >  create mode 100644 Documentation/devicetree/bindings/input/mtk-pmic-keys.txt
> > 
> > diff --git a/Documentation/devicetree/bindings/input/mtk-pmic-keys.txt b/Documentation/devicetree/bindings/input/mtk-pmic-keys.txt
> > new file mode 100644
> > index 0000000..100ec44
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/input/mtk-pmic-keys.txt
> > @@ -0,0 +1,38 @@
> > +MediaTek MT6397/MT6323 PMIC Keys Device Driver
> > +
> > +There are two key functions provided by MT6397/MT6323 PMIC, pwrkey
> > +and homekey. The key functions are defined as the subnode of the function
> > +node provided by MT6397/MT6323 PMIC that is being defined as one kind
> > +of Muti-Function Device (MFD)
> > +
> > +For MT6397/MT6323 MFD bindings see:
> > +Documentation/devicetree/bindings/mfd/mt6397.txt
> > +
> > +Required properties:
> > +- compatible: "mediatek,mt6397-keys" or "mediatek,mt6323-keys"
> > +- linux,keycodes: Specifies the numeric keycode values to
> > +	be used for reporting keys presses. The array can
> > +	contain up to 2 entries.
> > +
> > +Optional Properties:
> > +- wakeup-source: each key can be used as a wakeup source.
> 
> wakeup-source is defined as a boolean.

Hi Rob,

Could I modify it as this?

mediatek,wakeup-keys = <1>, <0>;
wakeup-source;

Thanks.
> 
> > +- mediatek,long-press-mode: Long press key shutdown setting, 1 for
> > +	pwrkey only, 2 for pwrkey/homekey together, others for disabled.
> > +- debounce-interval: Long press key shutdown debouncing interval time
> > +	in seconds. 0/1/2/3 for 8/11/14/5 seconds. If not specified defaults to 0.
> > +
> > +Example:
> > +
> > +	pmic: mt6397 {
> > +		compatible = "mediatek,mt6397";
> > +
> > +		...
> > +
> > +		mt6397keys: mt6397keys {
> > +			compatible = "mediatek,mt6397-keys";
> > +			linux,keycodes = <KEY_POWER>, <KEY_VOLUMEDOWN>;
> > +			wakeup-source = <1>, <0>;
> > +			mediatek,long-press-mode = <1>;
> > +			debounce-interval = <0>;
> > +		};
> > +	};
> > -- 
> > 1.7.9.5
> > 

Re: [PATCH v3 2/5] dt-bindings: input: Add document bindings for mtk-pmic-keys

[Chen Zhong]

On Thu, 2017-08-31 at 14:52 -0500, Rob Herring wrote:
> On Fri, Aug 25, 2017 at 02:32:30PM +0800, Chen Zhong wrote:
> > This patch adds the device tree binding documentation for the MediaTek
> > pmic keys found on PMIC MT6397/MT6323.
> > 
> > Signed-off-by: Chen Zhong <chen.zhong@mediatek.com>
> > ---
> >  .../devicetree/bindings/input/mtk-pmic-keys.txt    |   38 ++++++++++++++++++++
> >  1 file changed, 38 insertions(+)
> >  create mode 100644 Documentation/devicetree/bindings/input/mtk-pmic-keys.txt
> > 
> > diff --git a/Documentation/devicetree/bindings/input/mtk-pmic-keys.txt b/Documentation/devicetree/bindings/input/mtk-pmic-keys.txt
> > new file mode 100644
> > index 0000000..100ec44
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/input/mtk-pmic-keys.txt
> > @@ -0,0 +1,38 @@
> > +MediaTek MT6397/MT6323 PMIC Keys Device Driver
> > +
> > +There are two key functions provided by MT6397/MT6323 PMIC, pwrkey
> > +and homekey. The key functions are defined as the subnode of the function
> > +node provided by MT6397/MT6323 PMIC that is being defined as one kind
> > +of Muti-Function Device (MFD)
> > +
> > +For MT6397/MT6323 MFD bindings see:
> > +Documentation/devicetree/bindings/mfd/mt6397.txt
> > +
> > +Required properties:
> > +- compatible: "mediatek,mt6397-keys" or "mediatek,mt6323-keys"
> > +- linux,keycodes: Specifies the numeric keycode values to
> > +	be used for reporting keys presses. The array can
> > +	contain up to 2 entries.
> > +
> > +Optional Properties:
> > +- wakeup-source: each key can be used as a wakeup source.
> 
> wakeup-source is defined as a boolean.

Hi Rob,

Could I modify it as this?

mediatek,wakeup-keys = <1>, <0>;
wakeup-source;

Thanks.
> 
> > +- mediatek,long-press-mode: Long press key shutdown setting, 1 for
> > +	pwrkey only, 2 for pwrkey/homekey together, others for disabled.
> > +- debounce-interval: Long press key shutdown debouncing interval time
> > +	in seconds. 0/1/2/3 for 8/11/14/5 seconds. If not specified defaults to 0.
> > +
> > +Example:
> > +
> > +	pmic: mt6397 {
> > +		compatible = "mediatek,mt6397";
> > +
> > +		...
> > +
> > +		mt6397keys: mt6397keys {
> > +			compatible = "mediatek,mt6397-keys";
> > +			linux,keycodes = <KEY_POWER>, <KEY_VOLUMEDOWN>;
> > +			wakeup-source = <1>, <0>;
> > +			mediatek,long-press-mode = <1>;
> > +			debounce-interval = <0>;
> > +		};
> > +	};
> > -- 
> > 1.7.9.5
> > 

[PATCH v3 2/5] dt-bindings: input: Add document bindings for mtk-pmic-keys

[Chen Zhong]

On Thu, 2017-08-31 at 14:52 -0500, Rob Herring wrote:
> On Fri, Aug 25, 2017 at 02:32:30PM +0800, Chen Zhong wrote:
> > This patch adds the device tree binding documentation for the MediaTek
> > pmic keys found on PMIC MT6397/MT6323.
> > 
> > Signed-off-by: Chen Zhong <chen.zhong@mediatek.com>
> > ---
> >  .../devicetree/bindings/input/mtk-pmic-keys.txt    |   38 ++++++++++++++++++++
> >  1 file changed, 38 insertions(+)
> >  create mode 100644 Documentation/devicetree/bindings/input/mtk-pmic-keys.txt
> > 
> > diff --git a/Documentation/devicetree/bindings/input/mtk-pmic-keys.txt b/Documentation/devicetree/bindings/input/mtk-pmic-keys.txt
> > new file mode 100644
> > index 0000000..100ec44
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/input/mtk-pmic-keys.txt
> > @@ -0,0 +1,38 @@
> > +MediaTek MT6397/MT6323 PMIC Keys Device Driver
> > +
> > +There are two key functions provided by MT6397/MT6323 PMIC, pwrkey
> > +and homekey. The key functions are defined as the subnode of the function
> > +node provided by MT6397/MT6323 PMIC that is being defined as one kind
> > +of Muti-Function Device (MFD)
> > +
> > +For MT6397/MT6323 MFD bindings see:
> > +Documentation/devicetree/bindings/mfd/mt6397.txt
> > +
> > +Required properties:
> > +- compatible: "mediatek,mt6397-keys" or "mediatek,mt6323-keys"
> > +- linux,keycodes: Specifies the numeric keycode values to
> > +	be used for reporting keys presses. The array can
> > +	contain up to 2 entries.
> > +
> > +Optional Properties:
> > +- wakeup-source: each key can be used as a wakeup source.
> 
> wakeup-source is defined as a boolean.

Hi Rob,

Could I modify it as this?

mediatek,wakeup-keys = <1>, <0>;
wakeup-source;

Thanks.
> 
> > +- mediatek,long-press-mode: Long press key shutdown setting, 1 for
> > +	pwrkey only, 2 for pwrkey/homekey together, others for disabled.
> > +- debounce-interval: Long press key shutdown debouncing interval time
> > +	in seconds. 0/1/2/3 for 8/11/14/5 seconds. If not specified defaults to 0.
> > +
> > +Example:
> > +
> > +	pmic: mt6397 {
> > +		compatible = "mediatek,mt6397";
> > +
> > +		...
> > +
> > +		mt6397keys: mt6397keys {
> > +			compatible = "mediatek,mt6397-keys";
> > +			linux,keycodes = <KEY_POWER>, <KEY_VOLUMEDOWN>;
> > +			wakeup-source = <1>, <0>;
> > +			mediatek,long-press-mode = <1>;
> > +			debounce-interval = <0>;
> > +		};
> > +	};
> > -- 
> > 1.7.9.5
> > 

Re: [PATCH v3 3/5] dt-bindings: mfd: Add bindings for the keys as subnode of PMIC

[Lee Jones]

On Fri, 25 Aug 2017, Chen Zhong wrote:

> This patch adds documentation for device tree bindings for keys support
> as the subnode of MT6397/MT6323 PMIC.
> 
> Acked-by: Rob Herring <robh@kernel.org>
> Signed-off-by: Chen Zhong <chen.zhong@mediatek.com>
> ---
>  Documentation/devicetree/bindings/mfd/mt6397.txt |    6 ++++++
>  1 file changed, 6 insertions(+)

For my own reference:
  Acked-for-MFD-by: Lee Jones <lee.jones@linaro.org>

-- 
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog

[PATCH v3 3/5] dt-bindings: mfd: Add bindings for the keys as subnode of PMIC

[Lee Jones]

On Fri, 25 Aug 2017, Chen Zhong wrote:

> This patch adds documentation for device tree bindings for keys support
> as the subnode of MT6397/MT6323 PMIC.
> 
> Acked-by: Rob Herring <robh@kernel.org>
> Signed-off-by: Chen Zhong <chen.zhong@mediatek.com>
> ---
>  Documentation/devicetree/bindings/mfd/mt6397.txt |    6 ++++++
>  1 file changed, 6 insertions(+)

For my own reference:
  Acked-for-MFD-by: Lee Jones <lee.jones@linaro.org>

-- 
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org ? Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog

Re: [PATCH v3 5/5] mfd: mt6397: Add PMIC keys support to MT6397 driver

[Lee Jones]

On Fri, 25 Aug 2017, Chen Zhong wrote:

> This patch adds compatible strings and interrupts for pmic keys
> which serves as child device of MFD.
> 
> Signed-off-by: Chen Zhong <chen.zhong@mediatek.com>
> ---
>  drivers/mfd/mt6397-core.c |   22 +++++++++++++++++++++-
>  1 file changed, 21 insertions(+), 1 deletion(-)

For my own reference:
  Acked-for-MFD-by: Lee Jones <lee.jones@linaro.org>

-- 
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog

[PATCH v3 5/5] mfd: mt6397: Add PMIC keys support to MT6397 driver

[Lee Jones]

On Fri, 25 Aug 2017, Chen Zhong wrote:

> This patch adds compatible strings and interrupts for pmic keys
> which serves as child device of MFD.
> 
> Signed-off-by: Chen Zhong <chen.zhong@mediatek.com>
> ---
>  drivers/mfd/mt6397-core.c |   22 +++++++++++++++++++++-
>  1 file changed, 21 insertions(+), 1 deletion(-)

For my own reference:
  Acked-for-MFD-by: Lee Jones <lee.jones@linaro.org>

-- 
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org ? Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog

Re: [PATCH v3 2/5] dt-bindings: input: Add document bindings for mtk-pmic-keys

[Rob Herring]

On Fri, Sep 1, 2017 at 9:16 PM, Chen Zhong <chen.zhong@mediatek.com> wrote:
> On Thu, 2017-08-31 at 14:52 -0500, Rob Herring wrote:
>> On Fri, Aug 25, 2017 at 02:32:30PM +0800, Chen Zhong wrote:
>> > This patch adds the device tree binding documentation for the MediaTek
>> > pmic keys found on PMIC MT6397/MT6323.
>> >
>> > Signed-off-by: Chen Zhong <chen.zhong@mediatek.com>
>> > ---
>> >  .../devicetree/bindings/input/mtk-pmic-keys.txt    |   38 ++++++++++++++++++++
>> >  1 file changed, 38 insertions(+)
>> >  create mode 100644 Documentation/devicetree/bindings/input/mtk-pmic-keys.txt
>> >
>> > diff --git a/Documentation/devicetree/bindings/input/mtk-pmic-keys.txt b/Documentation/devicetree/bindings/input/mtk-pmic-keys.txt
>> > new file mode 100644
>> > index 0000000..100ec44
>> > --- /dev/null
>> > +++ b/Documentation/devicetree/bindings/input/mtk-pmic-keys.txt
>> > @@ -0,0 +1,38 @@
>> > +MediaTek MT6397/MT6323 PMIC Keys Device Driver
>> > +
>> > +There are two key functions provided by MT6397/MT6323 PMIC, pwrkey
>> > +and homekey. The key functions are defined as the subnode of the function
>> > +node provided by MT6397/MT6323 PMIC that is being defined as one kind
>> > +of Muti-Function Device (MFD)
>> > +
>> > +For MT6397/MT6323 MFD bindings see:
>> > +Documentation/devicetree/bindings/mfd/mt6397.txt
>> > +
>> > +Required properties:
>> > +- compatible: "mediatek,mt6397-keys" or "mediatek,mt6323-keys"
>> > +- linux,keycodes: Specifies the numeric keycode values to
>> > +   be used for reporting keys presses. The array can
>> > +   contain up to 2 entries.
>> > +
>> > +Optional Properties:
>> > +- wakeup-source: each key can be used as a wakeup source.
>>
>> wakeup-source is defined as a boolean.
>
> Hi Rob,
>
> Could I modify it as this?
>
> mediatek,wakeup-keys = <1>, <0>;
> wakeup-source;

What do the values and index signify? The power key is index 0 and the
value 1 means enable wakeup? Or each value is the raw key (i.e.
indexes in linux,keycode) that wakeup is enabled for?

I don't think this should be in DT really. It's really up to the user
(i.e. userspace) to decide what keys cause wakeup (or maybe that's
only suspend). If you default to the power key causes wakeup, do you
really need to support different options?

If we do put this in DT, then it should be a common binding to specify
keys that cause wake-up.

Rob

Re: [PATCH v3 2/5] dt-bindings: input: Add document bindings for mtk-pmic-keys

[Rob Herring]

On Fri, Sep 1, 2017 at 9:16 PM, Chen Zhong <chen.zhong@mediatek.com> wrote:
> On Thu, 2017-08-31 at 14:52 -0500, Rob Herring wrote:
>> On Fri, Aug 25, 2017 at 02:32:30PM +0800, Chen Zhong wrote:
>> > This patch adds the device tree binding documentation for the MediaTek
>> > pmic keys found on PMIC MT6397/MT6323.
>> >
>> > Signed-off-by: Chen Zhong <chen.zhong@mediatek.com>
>> > ---
>> >  .../devicetree/bindings/input/mtk-pmic-keys.txt    |   38 ++++++++++++++++++++
>> >  1 file changed, 38 insertions(+)
>> >  create mode 100644 Documentation/devicetree/bindings/input/mtk-pmic-keys.txt
>> >
>> > diff --git a/Documentation/devicetree/bindings/input/mtk-pmic-keys.txt b/Documentation/devicetree/bindings/input/mtk-pmic-keys.txt
>> > new file mode 100644
>> > index 0000000..100ec44
>> > --- /dev/null
>> > +++ b/Documentation/devicetree/bindings/input/mtk-pmic-keys.txt
>> > @@ -0,0 +1,38 @@
>> > +MediaTek MT6397/MT6323 PMIC Keys Device Driver
>> > +
>> > +There are two key functions provided by MT6397/MT6323 PMIC, pwrkey
>> > +and homekey. The key functions are defined as the subnode of the function
>> > +node provided by MT6397/MT6323 PMIC that is being defined as one kind
>> > +of Muti-Function Device (MFD)
>> > +
>> > +For MT6397/MT6323 MFD bindings see:
>> > +Documentation/devicetree/bindings/mfd/mt6397.txt
>> > +
>> > +Required properties:
>> > +- compatible: "mediatek,mt6397-keys" or "mediatek,mt6323-keys"
>> > +- linux,keycodes: Specifies the numeric keycode values to
>> > +   be used for reporting keys presses. The array can
>> > +   contain up to 2 entries.
>> > +
>> > +Optional Properties:
>> > +- wakeup-source: each key can be used as a wakeup source.
>>
>> wakeup-source is defined as a boolean.
>
> Hi Rob,
>
> Could I modify it as this?
>
> mediatek,wakeup-keys = <1>, <0>;
> wakeup-source;

What do the values and index signify? The power key is index 0 and the
value 1 means enable wakeup? Or each value is the raw key (i.e.
indexes in linux,keycode) that wakeup is enabled for?

I don't think this should be in DT really. It's really up to the user
(i.e. userspace) to decide what keys cause wakeup (or maybe that's
only suspend). If you default to the power key causes wakeup, do you
really need to support different options?

If we do put this in DT, then it should be a common binding to specify
keys that cause wake-up.

Rob

Re: [PATCH v3 2/5] dt-bindings: input: Add document bindings for mtk-pmic-keys

[Rob Herring]

On Fri, Sep 1, 2017 at 9:16 PM, Chen Zhong <chen.zhong@mediatek.com> wrote:
> On Thu, 2017-08-31 at 14:52 -0500, Rob Herring wrote:
>> On Fri, Aug 25, 2017 at 02:32:30PM +0800, Chen Zhong wrote:
>> > This patch adds the device tree binding documentation for the MediaTek
>> > pmic keys found on PMIC MT6397/MT6323.
>> >
>> > Signed-off-by: Chen Zhong <chen.zhong@mediatek.com>
>> > ---
>> >  .../devicetree/bindings/input/mtk-pmic-keys.txt    |   38 ++++++++++++++++++++
>> >  1 file changed, 38 insertions(+)
>> >  create mode 100644 Documentation/devicetree/bindings/input/mtk-pmic-keys.txt
>> >
>> > diff --git a/Documentation/devicetree/bindings/input/mtk-pmic-keys.txt b/Documentation/devicetree/bindings/input/mtk-pmic-keys.txt
>> > new file mode 100644
>> > index 0000000..100ec44
>> > --- /dev/null
>> > +++ b/Documentation/devicetree/bindings/input/mtk-pmic-keys.txt
>> > @@ -0,0 +1,38 @@
>> > +MediaTek MT6397/MT6323 PMIC Keys Device Driver
>> > +
>> > +There are two key functions provided by MT6397/MT6323 PMIC, pwrkey
>> > +and homekey. The key functions are defined as the subnode of the function
>> > +node provided by MT6397/MT6323 PMIC that is being defined as one kind
>> > +of Muti-Function Device (MFD)
>> > +
>> > +For MT6397/MT6323 MFD bindings see:
>> > +Documentation/devicetree/bindings/mfd/mt6397.txt
>> > +
>> > +Required properties:
>> > +- compatible: "mediatek,mt6397-keys" or "mediatek,mt6323-keys"
>> > +- linux,keycodes: Specifies the numeric keycode values to
>> > +   be used for reporting keys presses. The array can
>> > +   contain up to 2 entries.
>> > +
>> > +Optional Properties:
>> > +- wakeup-source: each key can be used as a wakeup source.
>>
>> wakeup-source is defined as a boolean.
>
> Hi Rob,
>
> Could I modify it as this?
>
> mediatek,wakeup-keys = <1>, <0>;
> wakeup-source;

What do the values and index signify? The power key is index 0 and the
value 1 means enable wakeup? Or each value is the raw key (i.e.
indexes in linux,keycode) that wakeup is enabled for?

I don't think this should be in DT really. It's really up to the user
(i.e. userspace) to decide what keys cause wakeup (or maybe that's
only suspend). If you default to the power key causes wakeup, do you
really need to support different options?

If we do put this in DT, then it should be a common binding to specify
keys that cause wake-up.

Rob

[PATCH v3 2/5] dt-bindings: input: Add document bindings for mtk-pmic-keys

[Rob Herring]

On Fri, Sep 1, 2017 at 9:16 PM, Chen Zhong <chen.zhong@mediatek.com> wrote:
> On Thu, 2017-08-31 at 14:52 -0500, Rob Herring wrote:
>> On Fri, Aug 25, 2017 at 02:32:30PM +0800, Chen Zhong wrote:
>> > This patch adds the device tree binding documentation for the MediaTek
>> > pmic keys found on PMIC MT6397/MT6323.
>> >
>> > Signed-off-by: Chen Zhong <chen.zhong@mediatek.com>
>> > ---
>> >  .../devicetree/bindings/input/mtk-pmic-keys.txt    |   38 ++++++++++++++++++++
>> >  1 file changed, 38 insertions(+)
>> >  create mode 100644 Documentation/devicetree/bindings/input/mtk-pmic-keys.txt
>> >
>> > diff --git a/Documentation/devicetree/bindings/input/mtk-pmic-keys.txt b/Documentation/devicetree/bindings/input/mtk-pmic-keys.txt
>> > new file mode 100644
>> > index 0000000..100ec44
>> > --- /dev/null
>> > +++ b/Documentation/devicetree/bindings/input/mtk-pmic-keys.txt
>> > @@ -0,0 +1,38 @@
>> > +MediaTek MT6397/MT6323 PMIC Keys Device Driver
>> > +
>> > +There are two key functions provided by MT6397/MT6323 PMIC, pwrkey
>> > +and homekey. The key functions are defined as the subnode of the function
>> > +node provided by MT6397/MT6323 PMIC that is being defined as one kind
>> > +of Muti-Function Device (MFD)
>> > +
>> > +For MT6397/MT6323 MFD bindings see:
>> > +Documentation/devicetree/bindings/mfd/mt6397.txt
>> > +
>> > +Required properties:
>> > +- compatible: "mediatek,mt6397-keys" or "mediatek,mt6323-keys"
>> > +- linux,keycodes: Specifies the numeric keycode values to
>> > +   be used for reporting keys presses. The array can
>> > +   contain up to 2 entries.
>> > +
>> > +Optional Properties:
>> > +- wakeup-source: each key can be used as a wakeup source.
>>
>> wakeup-source is defined as a boolean.
>
> Hi Rob,
>
> Could I modify it as this?
>
> mediatek,wakeup-keys = <1>, <0>;
> wakeup-source;

What do the values and index signify? The power key is index 0 and the
value 1 means enable wakeup? Or each value is the raw key (i.e.
indexes in linux,keycode) that wakeup is enabled for?

I don't think this should be in DT really. It's really up to the user
(i.e. userspace) to decide what keys cause wakeup (or maybe that's
only suspend). If you default to the power key causes wakeup, do you
really need to support different options?

If we do put this in DT, then it should be a common binding to specify
keys that cause wake-up.

Rob

Re: [PATCH v3 2/5] dt-bindings: input: Add document bindings for mtk-pmic-keys

[Chen Zhong]

On Tue, 2017-09-05 at 11:05 -0500, Rob Herring wrote:
> On Fri, Sep 1, 2017 at 9:16 PM, Chen Zhong <chen.zhong@mediatek.com> wrote:
> > On Thu, 2017-08-31 at 14:52 -0500, Rob Herring wrote:
> >> On Fri, Aug 25, 2017 at 02:32:30PM +0800, Chen Zhong wrote:
> >> > This patch adds the device tree binding documentation for the MediaTek
> >> > pmic keys found on PMIC MT6397/MT6323.
> >> >
> >> > Signed-off-by: Chen Zhong <chen.zhong@mediatek.com>
> >> > ---
> >> >  .../devicetree/bindings/input/mtk-pmic-keys.txt    |   38 ++++++++++++++++++++
> >> >  1 file changed, 38 insertions(+)
> >> >  create mode 100644 Documentation/devicetree/bindings/input/mtk-pmic-keys.txt
> >> >
> >> > diff --git a/Documentation/devicetree/bindings/input/mtk-pmic-keys.txt b/Documentation/devicetree/bindings/input/mtk-pmic-keys.txt
> >> > new file mode 100644
> >> > index 0000000..100ec44
> >> > --- /dev/null
> >> > +++ b/Documentation/devicetree/bindings/input/mtk-pmic-keys.txt
> >> > @@ -0,0 +1,38 @@
> >> > +MediaTek MT6397/MT6323 PMIC Keys Device Driver
> >> > +
> >> > +There are two key functions provided by MT6397/MT6323 PMIC, pwrkey
> >> > +and homekey. The key functions are defined as the subnode of the function
> >> > +node provided by MT6397/MT6323 PMIC that is being defined as one kind
> >> > +of Muti-Function Device (MFD)
> >> > +
> >> > +For MT6397/MT6323 MFD bindings see:
> >> > +Documentation/devicetree/bindings/mfd/mt6397.txt
> >> > +
> >> > +Required properties:
> >> > +- compatible: "mediatek,mt6397-keys" or "mediatek,mt6323-keys"
> >> > +- linux,keycodes: Specifies the numeric keycode values to
> >> > +   be used for reporting keys presses. The array can
> >> > +   contain up to 2 entries.
> >> > +
> >> > +Optional Properties:
> >> > +- wakeup-source: each key can be used as a wakeup source.
> >>
> >> wakeup-source is defined as a boolean.
> >
> > Hi Rob,
> >
> > Could I modify it as this?
> >
> > mediatek,wakeup-keys = <1>, <0>;
> > wakeup-source;
> 
> What do the values and index signify? The power key is index 0 and the
> value 1 means enable wakeup? Or each value is the raw key (i.e.
> indexes in linux,keycode) that wakeup is enabled for?
> 
> I don't think this should be in DT really. It's really up to the user
> (i.e. userspace) to decide what keys cause wakeup (or maybe that's
> only suspend). If you default to the power key causes wakeup, do you
> really need to support different options?
> 
> If we do put this in DT, then it should be a common binding to specify
> keys that cause wake-up.
> 
> Rob

Hi Rob,

Yes, we want to describe that power key is index 0 and is a wakeup
source, homekey is index 1 and not a wakeup source.

Since power key and homekey are two real HW keys, customer can decide
which key to be the wakeup source or both due to their hw design, so we
put this in DT and can be different for different boards.

Thank you.

Chen

Re: [PATCH v3 2/5] dt-bindings: input: Add document bindings for mtk-pmic-keys

[Chen Zhong]

On Tue, 2017-09-05 at 11:05 -0500, Rob Herring wrote:
> On Fri, Sep 1, 2017 at 9:16 PM, Chen Zhong <chen.zhong@mediatek.com> wrote:
> > On Thu, 2017-08-31 at 14:52 -0500, Rob Herring wrote:
> >> On Fri, Aug 25, 2017 at 02:32:30PM +0800, Chen Zhong wrote:
> >> > This patch adds the device tree binding documentation for the MediaTek
> >> > pmic keys found on PMIC MT6397/MT6323.
> >> >
> >> > Signed-off-by: Chen Zhong <chen.zhong@mediatek.com>
> >> > ---
> >> >  .../devicetree/bindings/input/mtk-pmic-keys.txt    |   38 ++++++++++++++++++++
> >> >  1 file changed, 38 insertions(+)
> >> >  create mode 100644 Documentation/devicetree/bindings/input/mtk-pmic-keys.txt
> >> >
> >> > diff --git a/Documentation/devicetree/bindings/input/mtk-pmic-keys.txt b/Documentation/devicetree/bindings/input/mtk-pmic-keys.txt
> >> > new file mode 100644
> >> > index 0000000..100ec44
> >> > --- /dev/null
> >> > +++ b/Documentation/devicetree/bindings/input/mtk-pmic-keys.txt
> >> > @@ -0,0 +1,38 @@
> >> > +MediaTek MT6397/MT6323 PMIC Keys Device Driver
> >> > +
> >> > +There are two key functions provided by MT6397/MT6323 PMIC, pwrkey
> >> > +and homekey. The key functions are defined as the subnode of the function
> >> > +node provided by MT6397/MT6323 PMIC that is being defined as one kind
> >> > +of Muti-Function Device (MFD)
> >> > +
> >> > +For MT6397/MT6323 MFD bindings see:
> >> > +Documentation/devicetree/bindings/mfd/mt6397.txt
> >> > +
> >> > +Required properties:
> >> > +- compatible: "mediatek,mt6397-keys" or "mediatek,mt6323-keys"
> >> > +- linux,keycodes: Specifies the numeric keycode values to
> >> > +   be used for reporting keys presses. The array can
> >> > +   contain up to 2 entries.
> >> > +
> >> > +Optional Properties:
> >> > +- wakeup-source: each key can be used as a wakeup source.
> >>
> >> wakeup-source is defined as a boolean.
> >
> > Hi Rob,
> >
> > Could I modify it as this?
> >
> > mediatek,wakeup-keys = <1>, <0>;
> > wakeup-source;
> 
> What do the values and index signify? The power key is index 0 and the
> value 1 means enable wakeup? Or each value is the raw key (i.e.
> indexes in linux,keycode) that wakeup is enabled for?
> 
> I don't think this should be in DT really. It's really up to the user
> (i.e. userspace) to decide what keys cause wakeup (or maybe that's
> only suspend). If you default to the power key causes wakeup, do you
> really need to support different options?
> 
> If we do put this in DT, then it should be a common binding to specify
> keys that cause wake-up.
> 
> Rob

Hi Rob,

Yes, we want to describe that power key is index 0 and is a wakeup
source, homekey is index 1 and not a wakeup source.

Since power key and homekey are two real HW keys, customer can decide
which key to be the wakeup source or both due to their hw design, so we
put this in DT and can be different for different boards.

Thank you.

Chen

Re: [PATCH v3 2/5] dt-bindings: input: Add document bindings for mtk-pmic-keys

[Chen Zhong]

On Tue, 2017-09-05 at 11:05 -0500, Rob Herring wrote:
> On Fri, Sep 1, 2017 at 9:16 PM, Chen Zhong <chen.zhong@mediatek.com> wrote:
> > On Thu, 2017-08-31 at 14:52 -0500, Rob Herring wrote:
> >> On Fri, Aug 25, 2017 at 02:32:30PM +0800, Chen Zhong wrote:
> >> > This patch adds the device tree binding documentation for the MediaTek
> >> > pmic keys found on PMIC MT6397/MT6323.
> >> >
> >> > Signed-off-by: Chen Zhong <chen.zhong@mediatek.com>
> >> > ---
> >> >  .../devicetree/bindings/input/mtk-pmic-keys.txt    |   38 ++++++++++++++++++++
> >> >  1 file changed, 38 insertions(+)
> >> >  create mode 100644 Documentation/devicetree/bindings/input/mtk-pmic-keys.txt
> >> >
> >> > diff --git a/Documentation/devicetree/bindings/input/mtk-pmic-keys.txt b/Documentation/devicetree/bindings/input/mtk-pmic-keys.txt
> >> > new file mode 100644
> >> > index 0000000..100ec44
> >> > --- /dev/null
> >> > +++ b/Documentation/devicetree/bindings/input/mtk-pmic-keys.txt
> >> > @@ -0,0 +1,38 @@
> >> > +MediaTek MT6397/MT6323 PMIC Keys Device Driver
> >> > +
> >> > +There are two key functions provided by MT6397/MT6323 PMIC, pwrkey
> >> > +and homekey. The key functions are defined as the subnode of the function
> >> > +node provided by MT6397/MT6323 PMIC that is being defined as one kind
> >> > +of Muti-Function Device (MFD)
> >> > +
> >> > +For MT6397/MT6323 MFD bindings see:
> >> > +Documentation/devicetree/bindings/mfd/mt6397.txt
> >> > +
> >> > +Required properties:
> >> > +- compatible: "mediatek,mt6397-keys" or "mediatek,mt6323-keys"
> >> > +- linux,keycodes: Specifies the numeric keycode values to
> >> > +   be used for reporting keys presses. The array can
> >> > +   contain up to 2 entries.
> >> > +
> >> > +Optional Properties:
> >> > +- wakeup-source: each key can be used as a wakeup source.
> >>
> >> wakeup-source is defined as a boolean.
> >
> > Hi Rob,
> >
> > Could I modify it as this?
> >
> > mediatek,wakeup-keys = <1>, <0>;
> > wakeup-source;
> 
> What do the values and index signify? The power key is index 0 and the
> value 1 means enable wakeup? Or each value is the raw key (i.e.
> indexes in linux,keycode) that wakeup is enabled for?
> 
> I don't think this should be in DT really. It's really up to the user
> (i.e. userspace) to decide what keys cause wakeup (or maybe that's
> only suspend). If you default to the power key causes wakeup, do you
> really need to support different options?
> 
> If we do put this in DT, then it should be a common binding to specify
> keys that cause wake-up.
> 
> Rob

Hi Rob,

Yes, we want to describe that power key is index 0 and is a wakeup
source, homekey is index 1 and not a wakeup source.

Since power key and homekey are two real HW keys, customer can decide
which key to be the wakeup source or both due to their hw design, so we
put this in DT and can be different for different boards.

Thank you.

Chen

[PATCH v3 2/5] dt-bindings: input: Add document bindings for mtk-pmic-keys

[Chen Zhong]

On Tue, 2017-09-05 at 11:05 -0500, Rob Herring wrote:
> On Fri, Sep 1, 2017 at 9:16 PM, Chen Zhong <chen.zhong@mediatek.com> wrote:
> > On Thu, 2017-08-31 at 14:52 -0500, Rob Herring wrote:
> >> On Fri, Aug 25, 2017 at 02:32:30PM +0800, Chen Zhong wrote:
> >> > This patch adds the device tree binding documentation for the MediaTek
> >> > pmic keys found on PMIC MT6397/MT6323.
> >> >
> >> > Signed-off-by: Chen Zhong <chen.zhong@mediatek.com>
> >> > ---
> >> >  .../devicetree/bindings/input/mtk-pmic-keys.txt    |   38 ++++++++++++++++++++
> >> >  1 file changed, 38 insertions(+)
> >> >  create mode 100644 Documentation/devicetree/bindings/input/mtk-pmic-keys.txt
> >> >
> >> > diff --git a/Documentation/devicetree/bindings/input/mtk-pmic-keys.txt b/Documentation/devicetree/bindings/input/mtk-pmic-keys.txt
> >> > new file mode 100644
> >> > index 0000000..100ec44
> >> > --- /dev/null
> >> > +++ b/Documentation/devicetree/bindings/input/mtk-pmic-keys.txt
> >> > @@ -0,0 +1,38 @@
> >> > +MediaTek MT6397/MT6323 PMIC Keys Device Driver
> >> > +
> >> > +There are two key functions provided by MT6397/MT6323 PMIC, pwrkey
> >> > +and homekey. The key functions are defined as the subnode of the function
> >> > +node provided by MT6397/MT6323 PMIC that is being defined as one kind
> >> > +of Muti-Function Device (MFD)
> >> > +
> >> > +For MT6397/MT6323 MFD bindings see:
> >> > +Documentation/devicetree/bindings/mfd/mt6397.txt
> >> > +
> >> > +Required properties:
> >> > +- compatible: "mediatek,mt6397-keys" or "mediatek,mt6323-keys"
> >> > +- linux,keycodes: Specifies the numeric keycode values to
> >> > +   be used for reporting keys presses. The array can
> >> > +   contain up to 2 entries.
> >> > +
> >> > +Optional Properties:
> >> > +- wakeup-source: each key can be used as a wakeup source.
> >>
> >> wakeup-source is defined as a boolean.
> >
> > Hi Rob,
> >
> > Could I modify it as this?
> >
> > mediatek,wakeup-keys = <1>, <0>;
> > wakeup-source;
> 
> What do the values and index signify? The power key is index 0 and the
> value 1 means enable wakeup? Or each value is the raw key (i.e.
> indexes in linux,keycode) that wakeup is enabled for?
> 
> I don't think this should be in DT really. It's really up to the user
> (i.e. userspace) to decide what keys cause wakeup (or maybe that's
> only suspend). If you default to the power key causes wakeup, do you
> really need to support different options?
> 
> If we do put this in DT, then it should be a common binding to specify
> keys that cause wake-up.
> 
> Rob

Hi Rob,

Yes, we want to describe that power key is index 0 and is a wakeup
source, homekey is index 1 and not a wakeup source.

Since power key and homekey are two real HW keys, customer can decide
which key to be the wakeup source or both due to their hw design, so we
put this in DT and can be different for different boards.

Thank you.

Chen