[PATCH 0/2 v4] oom: capture unreclaimable slab info in oom message when kernel panic

[PATCH 0/2 v4] oom: capture unreclaimable slab info in oom message when kernel panic

[Yang Shi]

Recently we ran into a oom issue, kernel panic due to no killable process.
The dmesg shows huge unreclaimable slabs used almost 100% memory, but kdump doesn't capture vmcore due to some reason.

So, it may sound better to capture unreclaimable slab info in oom message when kernel panic to aid trouble shooting and cover the corner case.
Since kernel already panic, so capturing more information sounds worthy and doesn't bother normal oom killer.

With the patchset, tools/vm/slabinfo has a new option, "-U", to show unreclaimable slab only.

And, oom will print all non zero (num_objs * size != 0) unreclaimable slabs in oom killer message.

For details, please see the commit log for each commit.

Changelog v3 —> v4:
* Solved the comments from David
* Added David’s Acked-by in patch 1

Changelog v2 —> v3:
* Show used size and total size of each kmem cache per David’s comment

Changelog v1 —> v2:
* Removed the original patch 1 (“mm: slab: output reclaimable flag in /proc/slabinfo”) since Christoph suggested it might break the compatibility and /proc/slabinfo is legacy
* Added Christoph’s Acked-by
* Removed acquiring slab_mutex per Tetsuo’s comment


Yang Shi (2):
      tools: slabinfo: add "-U" option to show unreclaimable slabs only
      mm: oom: show unreclaimable slab info when kernel panic

 mm/oom_kill.c       |  3 +++
 mm/slab.h           |  8 ++++++++
 mm/slab_common.c    | 26 ++++++++++++++++++++++++++
 tools/vm/slabinfo.c | 11 ++++++++++-
 4 files changed, 47 insertions(+), 1 deletion(-)

[PATCH 0/2 v4] oom: capture unreclaimable slab info in oom message when kernel panic

[Yang Shi]

Recently we ran into a oom issue, kernel panic due to no killable process.
The dmesg shows huge unreclaimable slabs used almost 100% memory, but kdump doesn't capture vmcore due to some reason.

So, it may sound better to capture unreclaimable slab info in oom message when kernel panic to aid trouble shooting and cover the corner case.
Since kernel already panic, so capturing more information sounds worthy and doesn't bother normal oom killer.

With the patchset, tools/vm/slabinfo has a new option, "-U", to show unreclaimable slab only.

And, oom will print all non zero (num_objs * size != 0) unreclaimable slabs in oom killer message.

For details, please see the commit log for each commit.

Changelog v3 a??> v4:
* Solved the comments from David
* Added Davida??s Acked-by in patch 1

Changelog v2 a??> v3:
* Show used size and total size of each kmem cache per Davida??s comment

Changelog v1 a??> v2:
* Removed the original patch 1 (a??mm: slab: output reclaimable flag in /proc/slabinfoa??) since Christoph suggested it might break the compatibility and /proc/slabinfo is legacy
* Added Christopha??s Acked-by
* Removed acquiring slab_mutex per Tetsuoa??s comment


Yang Shi (2):
      tools: slabinfo: add "-U" option to show unreclaimable slabs only
      mm: oom: show unreclaimable slab info when kernel panic

 mm/oom_kill.c       |  3 +++
 mm/slab.h           |  8 ++++++++
 mm/slab_common.c    | 26 ++++++++++++++++++++++++++
 tools/vm/slabinfo.c | 11 ++++++++++-
 4 files changed, 47 insertions(+), 1 deletion(-)

--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org.  For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>

[PATCH 1/2] tools: slabinfo: add "-U" option to show unreclaimable slabs only

[Yang Shi]

Add "-U" option to show unreclaimable slabs only.

"-U" and "-S" together can tell us what unreclaimable slabs use the most
memory to help debug huge unreclaimable slabs issue.

Signed-off-by: Yang Shi <yang.s@alibaba-inc.com>
Acked-by: Christoph Lameter <cl@linux.com>
Acked-by: David Rientjes <rientjes@google.com>
---
 tools/vm/slabinfo.c | 11 ++++++++++-
 1 file changed, 10 insertions(+), 1 deletion(-)

diff --git a/tools/vm/slabinfo.c b/tools/vm/slabinfo.c
index b9d34b3..de8fa11 100644
--- a/tools/vm/slabinfo.c
+++ b/tools/vm/slabinfo.c
@@ -83,6 +83,7 @@ struct aliasinfo {
 int sort_loss;
 int extended_totals;
 int show_bytes;
+int unreclaim_only;
 
 /* Debug options */
 int sanity;
@@ -132,6 +133,7 @@ static void usage(void)
 		"-L|--Loss              Sort by loss\n"
 		"-X|--Xtotals           Show extended summary information\n"
 		"-B|--Bytes             Show size in bytes\n"
+		"-U|--Unreclaim		Show unreclaimable slabs only\n"
 		"\nValid debug options (FZPUT may be combined)\n"
 		"a / A          Switch on all debug options (=FZUP)\n"
 		"-              Switch off all debug options\n"
@@ -568,6 +570,9 @@ static void slabcache(struct slabinfo *s)
 	if (strcmp(s->name, "*") == 0)
 		return;
 
+	if (unreclaim_only && s->reclaim_account)
+		return;
+
 	if (actual_slabs == 1) {
 		report(s);
 		return;
@@ -1346,6 +1351,7 @@ struct option opts[] = {
 	{ "Loss", no_argument, NULL, 'L'},
 	{ "Xtotals", no_argument, NULL, 'X'},
 	{ "Bytes", no_argument, NULL, 'B'},
+	{ "Unreclaim", no_argument, NULL, 'U'},
 	{ NULL, 0, NULL, 0 }
 };
 
@@ -1357,7 +1363,7 @@ int main(int argc, char *argv[])
 
 	page_size = getpagesize();
 
-	while ((c = getopt_long(argc, argv, "aAd::Defhil1noprstvzTSN:LXB",
+	while ((c = getopt_long(argc, argv, "aAd::Defhil1noprstvzTSN:LXBU",
 						opts, NULL)) != -1)
 		switch (c) {
 		case '1':
@@ -1438,6 +1444,9 @@ int main(int argc, char *argv[])
 		case 'B':
 			show_bytes = 1;
 			break;
+		case 'U':
+			unreclaim_only = 1;
+			break;
 		default:
 			fatal("%s: Invalid option '%c'\n", argv[0], optopt);
 
-- 
1.8.3.1

[PATCH 1/2] tools: slabinfo: add "-U" option to show unreclaimable slabs only

[Yang Shi]

Add "-U" option to show unreclaimable slabs only.

"-U" and "-S" together can tell us what unreclaimable slabs use the most
memory to help debug huge unreclaimable slabs issue.

Signed-off-by: Yang Shi <yang.s@alibaba-inc.com>
Acked-by: Christoph Lameter <cl@linux.com>
Acked-by: David Rientjes <rientjes@google.com>
---
 tools/vm/slabinfo.c | 11 ++++++++++-
 1 file changed, 10 insertions(+), 1 deletion(-)

diff --git a/tools/vm/slabinfo.c b/tools/vm/slabinfo.c
index b9d34b3..de8fa11 100644
--- a/tools/vm/slabinfo.c
+++ b/tools/vm/slabinfo.c
@@ -83,6 +83,7 @@ struct aliasinfo {
 int sort_loss;
 int extended_totals;
 int show_bytes;
+int unreclaim_only;
 
 /* Debug options */
 int sanity;
@@ -132,6 +133,7 @@ static void usage(void)
 		"-L|--Loss              Sort by loss\n"
 		"-X|--Xtotals           Show extended summary information\n"
 		"-B|--Bytes             Show size in bytes\n"
+		"-U|--Unreclaim		Show unreclaimable slabs only\n"
 		"\nValid debug options (FZPUT may be combined)\n"
 		"a / A          Switch on all debug options (=FZUP)\n"
 		"-              Switch off all debug options\n"
@@ -568,6 +570,9 @@ static void slabcache(struct slabinfo *s)
 	if (strcmp(s->name, "*") == 0)
 		return;
 
+	if (unreclaim_only && s->reclaim_account)
+		return;
+
 	if (actual_slabs == 1) {
 		report(s);
 		return;
@@ -1346,6 +1351,7 @@ struct option opts[] = {
 	{ "Loss", no_argument, NULL, 'L'},
 	{ "Xtotals", no_argument, NULL, 'X'},
 	{ "Bytes", no_argument, NULL, 'B'},
+	{ "Unreclaim", no_argument, NULL, 'U'},
 	{ NULL, 0, NULL, 0 }
 };
 
@@ -1357,7 +1363,7 @@ int main(int argc, char *argv[])
 
 	page_size = getpagesize();
 
-	while ((c = getopt_long(argc, argv, "aAd::Defhil1noprstvzTSN:LXB",
+	while ((c = getopt_long(argc, argv, "aAd::Defhil1noprstvzTSN:LXBU",
 						opts, NULL)) != -1)
 		switch (c) {
 		case '1':
@@ -1438,6 +1444,9 @@ int main(int argc, char *argv[])
 		case 'B':
 			show_bytes = 1;
 			break;
+		case 'U':
+			unreclaim_only = 1;
+			break;
 		default:
 			fatal("%s: Invalid option '%c'\n", argv[0], optopt);
 
-- 
1.8.3.1

--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org.  For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>

[PATCH 2/2] mm: oom: show unreclaimable slab info when kernel panic

[Yang Shi]

Kernel may panic when oom happens without killable process sometimes it
is caused by huge unreclaimable slabs used by kernel.

Although kdump could help debug such problem, however, kdump is not
available on all architectures and it might be malfunction sometime.
And, since kernel already panic it is worthy capturing such information
in dmesg to aid touble shooting.

Print out unreclaimable slab info (used size and total size) which
actual memory usage is not zero (num_objs * size != 0) when panic_on_oom is set
or no killable process. Since such information is just showed when kernel
panic, so it will not lead too verbose message for normal oom.

The output looks like:

Unreclaimable slab info:
Name                      Used          Total
rpc_buffers               31KB         31KB
rpc_tasks                  7KB          7KB
ebitmap_node            1964KB       1964KB
avtab_node              5024KB       5024KB
xfs_buf                 1402KB       1402KB
xfs_ili                  134KB        134KB
xfs_efi_item             115KB        115KB
xfs_efd_item             115KB        115KB
xfs_buf_item             134KB        134KB
xfs_log_item_desc        342KB        342KB
xfs_trans               1412KB       1412KB
xfs_ifork                212KB        212KB

Signed-off-by: Yang Shi <yang.s@alibaba-inc.com>
---
 mm/oom_kill.c    |  3 +++
 mm/slab.h        |  8 ++++++++
 mm/slab_common.c | 26 ++++++++++++++++++++++++++
 3 files changed, 37 insertions(+)

diff --git a/mm/oom_kill.c b/mm/oom_kill.c
index 99736e0..bd48d34 100644
--- a/mm/oom_kill.c
+++ b/mm/oom_kill.c
@@ -43,6 +43,7 @@
 
 #include <asm/tlb.h>
 #include "internal.h"
+#include "slab.h"
 
 #define CREATE_TRACE_POINTS
 #include <trace/events/oom.h>
@@ -960,6 +961,7 @@ static void check_panic_on_oom(struct oom_control *oc,
 	if (is_sysrq_oom(oc))
 		return;
 	dump_header(oc, NULL);
+	dump_unreclaimable_slab();
 	panic("Out of memory: %s panic_on_oom is enabled\n",
 		sysctl_panic_on_oom == 2 ? "compulsory" : "system-wide");
 }
@@ -1044,6 +1046,7 @@ bool out_of_memory(struct oom_control *oc)
 	/* Found nothing?!?! Either we hang forever, or we panic. */
 	if (!oc->chosen && !is_sysrq_oom(oc) && !is_memcg_oom(oc)) {
 		dump_header(oc, NULL);
+		dump_unreclaimable_slab();
 		panic("Out of memory and no killable processes...\n");
 	}
 	if (oc->chosen && oc->chosen != (void *)-1UL) {
diff --git a/mm/slab.h b/mm/slab.h
index 0733628..734a92d 100644
--- a/mm/slab.h
+++ b/mm/slab.h
@@ -505,6 +505,14 @@ static inline struct kmem_cache_node *get_node(struct kmem_cache *s, int node)
 void memcg_slab_stop(struct seq_file *m, void *p);
 int memcg_slab_show(struct seq_file *m, void *p);
 
+#ifdef CONFIG_SLABINFO
+void dump_unreclaimable_slab(void);
+#else
+void dump_unreclaimable_slab(void);
+{
+}
+#endif
+
 void ___cache_free(struct kmem_cache *cache, void *x, unsigned long addr);
 
 #ifdef CONFIG_SLAB_FREELIST_RANDOM
diff --git a/mm/slab_common.c b/mm/slab_common.c
index 904a83b..90d9de3 100644
--- a/mm/slab_common.c
+++ b/mm/slab_common.c
@@ -1272,6 +1272,32 @@ static int slab_show(struct seq_file *m, void *p)
 	return 0;
 }
 
+void dump_unreclaimable_slab(void)
+{
+	struct kmem_cache *s;
+	struct slabinfo sinfo;
+
+	pr_info("Unreclaimable slab info:\n");
+	pr_info("Name                      Used          Total\n");
+
+	/*
+	 * Here acquiring slab_mutex is unnecessary since we don't prefer to
+	 * get sleep in oom path right before kernel panic, and avoid race condition.
+	 * Since it is already oom, so there should be not any big allocation
+	 * which could change the statistics significantly.
+	 */
+	list_for_each_entry(s, &slab_caches, list) {
+		if (!is_root_cache(s))
+			continue;
+
+		memset(&sinfo, 0, sizeof(sinfo));
+		get_slabinfo(s, &sinfo);
+
+		if (!(s->flags & SLAB_RECLAIM_ACCOUNT) && sinfo.num_objs > 0)
+			pr_info("%-17s %10luKB %10luKB\n", cache_name(s), (sinfo.active_objs * s->size) / 1024, (sinfo.num_objs * s->size) / 1024);
+	}
+}
+
 #if defined(CONFIG_MEMCG) && !defined(CONFIG_SLOB)
 void *memcg_slab_start(struct seq_file *m, loff_t *pos)
 {
-- 
1.8.3.1

[PATCH 2/2] mm: oom: show unreclaimable slab info when kernel panic

[Yang Shi]

Kernel may panic when oom happens without killable process sometimes it
is caused by huge unreclaimable slabs used by kernel.

Although kdump could help debug such problem, however, kdump is not
available on all architectures and it might be malfunction sometime.
And, since kernel already panic it is worthy capturing such information
in dmesg to aid touble shooting.

Print out unreclaimable slab info (used size and total size) which
actual memory usage is not zero (num_objs * size != 0) when panic_on_oom is set
or no killable process. Since such information is just showed when kernel
panic, so it will not lead too verbose message for normal oom.

The output looks like:

Unreclaimable slab info:
Name                      Used          Total
rpc_buffers               31KB         31KB
rpc_tasks                  7KB          7KB
ebitmap_node            1964KB       1964KB
avtab_node              5024KB       5024KB
xfs_buf                 1402KB       1402KB
xfs_ili                  134KB        134KB
xfs_efi_item             115KB        115KB
xfs_efd_item             115KB        115KB
xfs_buf_item             134KB        134KB
xfs_log_item_desc        342KB        342KB
xfs_trans               1412KB       1412KB
xfs_ifork                212KB        212KB

Signed-off-by: Yang Shi <yang.s@alibaba-inc.com>
---
 mm/oom_kill.c    |  3 +++
 mm/slab.h        |  8 ++++++++
 mm/slab_common.c | 26 ++++++++++++++++++++++++++
 3 files changed, 37 insertions(+)

diff --git a/mm/oom_kill.c b/mm/oom_kill.c
index 99736e0..bd48d34 100644
--- a/mm/oom_kill.c
+++ b/mm/oom_kill.c
@@ -43,6 +43,7 @@
 
 #include <asm/tlb.h>
 #include "internal.h"
+#include "slab.h"
 
 #define CREATE_TRACE_POINTS
 #include <trace/events/oom.h>
@@ -960,6 +961,7 @@ static void check_panic_on_oom(struct oom_control *oc,
 	if (is_sysrq_oom(oc))
 		return;
 	dump_header(oc, NULL);
+	dump_unreclaimable_slab();
 	panic("Out of memory: %s panic_on_oom is enabled\n",
 		sysctl_panic_on_oom == 2 ? "compulsory" : "system-wide");
 }
@@ -1044,6 +1046,7 @@ bool out_of_memory(struct oom_control *oc)
 	/* Found nothing?!?! Either we hang forever, or we panic. */
 	if (!oc->chosen && !is_sysrq_oom(oc) && !is_memcg_oom(oc)) {
 		dump_header(oc, NULL);
+		dump_unreclaimable_slab();
 		panic("Out of memory and no killable processes...\n");
 	}
 	if (oc->chosen && oc->chosen != (void *)-1UL) {
diff --git a/mm/slab.h b/mm/slab.h
index 0733628..734a92d 100644
--- a/mm/slab.h
+++ b/mm/slab.h
@@ -505,6 +505,14 @@ static inline struct kmem_cache_node *get_node(struct kmem_cache *s, int node)
 void memcg_slab_stop(struct seq_file *m, void *p);
 int memcg_slab_show(struct seq_file *m, void *p);
 
+#ifdef CONFIG_SLABINFO
+void dump_unreclaimable_slab(void);
+#else
+void dump_unreclaimable_slab(void);
+{
+}
+#endif
+
 void ___cache_free(struct kmem_cache *cache, void *x, unsigned long addr);
 
 #ifdef CONFIG_SLAB_FREELIST_RANDOM
diff --git a/mm/slab_common.c b/mm/slab_common.c
index 904a83b..90d9de3 100644
--- a/mm/slab_common.c
+++ b/mm/slab_common.c
@@ -1272,6 +1272,32 @@ static int slab_show(struct seq_file *m, void *p)
 	return 0;
 }
 
+void dump_unreclaimable_slab(void)
+{
+	struct kmem_cache *s;
+	struct slabinfo sinfo;
+
+	pr_info("Unreclaimable slab info:\n");
+	pr_info("Name                      Used          Total\n");
+
+	/*
+	 * Here acquiring slab_mutex is unnecessary since we don't prefer to
+	 * get sleep in oom path right before kernel panic, and avoid race condition.
+	 * Since it is already oom, so there should be not any big allocation
+	 * which could change the statistics significantly.
+	 */
+	list_for_each_entry(s, &slab_caches, list) {
+		if (!is_root_cache(s))
+			continue;
+
+		memset(&sinfo, 0, sizeof(sinfo));
+		get_slabinfo(s, &sinfo);
+
+		if (!(s->flags & SLAB_RECLAIM_ACCOUNT) && sinfo.num_objs > 0)
+			pr_info("%-17s %10luKB %10luKB\n", cache_name(s), (sinfo.active_objs * s->size) / 1024, (sinfo.num_objs * s->size) / 1024);
+	}
+}
+
 #if defined(CONFIG_MEMCG) && !defined(CONFIG_SLOB)
 void *memcg_slab_start(struct seq_file *m, loff_t *pos)
 {
-- 
1.8.3.1

--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org.  For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>

Re: [PATCH 2/2] mm: oom: show unreclaimable slab info when kernel panic

[David Rientjes]

On Thu, 21 Sep 2017, Yang Shi wrote:

> Kernel may panic when oom happens without killable process sometimes it
> is caused by huge unreclaimable slabs used by kernel.
> 
> Although kdump could help debug such problem, however, kdump is not
> available on all architectures and it might be malfunction sometime.
> And, since kernel already panic it is worthy capturing such information
> in dmesg to aid touble shooting.
> 
> Print out unreclaimable slab info (used size and total size) which
> actual memory usage is not zero (num_objs * size != 0) when panic_on_oom is set
> or no killable process. Since such information is just showed when kernel
> panic, so it will not lead too verbose message for normal oom.
> 
> The output looks like:
> 
> Unreclaimable slab info:
> Name                      Used          Total
> rpc_buffers               31KB         31KB
> rpc_tasks                  7KB          7KB
> ebitmap_node            1964KB       1964KB
> avtab_node              5024KB       5024KB
> xfs_buf                 1402KB       1402KB
> xfs_ili                  134KB        134KB
> xfs_efi_item             115KB        115KB
> xfs_efd_item             115KB        115KB
> xfs_buf_item             134KB        134KB
> xfs_log_item_desc        342KB        342KB
> xfs_trans               1412KB       1412KB
> xfs_ifork                212KB        212KB
> 
> Signed-off-by: Yang Shi <yang.s@alibaba-inc.com>
> ---
>  mm/oom_kill.c    |  3 +++
>  mm/slab.h        |  8 ++++++++
>  mm/slab_common.c | 26 ++++++++++++++++++++++++++
>  3 files changed, 37 insertions(+)
> 
> diff --git a/mm/oom_kill.c b/mm/oom_kill.c
> index 99736e0..bd48d34 100644
> --- a/mm/oom_kill.c
> +++ b/mm/oom_kill.c
> @@ -43,6 +43,7 @@
>  
>  #include <asm/tlb.h>
>  #include "internal.h"
> +#include "slab.h"
>  
>  #define CREATE_TRACE_POINTS
>  #include <trace/events/oom.h>
> @@ -960,6 +961,7 @@ static void check_panic_on_oom(struct oom_control *oc,
>  	if (is_sysrq_oom(oc))
>  		return;
>  	dump_header(oc, NULL);
> +	dump_unreclaimable_slab();
>  	panic("Out of memory: %s panic_on_oom is enabled\n",
>  		sysctl_panic_on_oom == 2 ? "compulsory" : "system-wide");
>  }
> @@ -1044,6 +1046,7 @@ bool out_of_memory(struct oom_control *oc)
>  	/* Found nothing?!?! Either we hang forever, or we panic. */
>  	if (!oc->chosen && !is_sysrq_oom(oc) && !is_memcg_oom(oc)) {
>  		dump_header(oc, NULL);
> +		dump_unreclaimable_slab();
>  		panic("Out of memory and no killable processes...\n");
>  	}
>  	if (oc->chosen && oc->chosen != (void *)-1UL) {
> diff --git a/mm/slab.h b/mm/slab.h
> index 0733628..734a92d 100644
> --- a/mm/slab.h
> +++ b/mm/slab.h
> @@ -505,6 +505,14 @@ static inline struct kmem_cache_node *get_node(struct kmem_cache *s, int node)
>  void memcg_slab_stop(struct seq_file *m, void *p);
>  int memcg_slab_show(struct seq_file *m, void *p);
>  
> +#ifdef CONFIG_SLABINFO
> +void dump_unreclaimable_slab(void);
> +#else
> +void dump_unreclaimable_slab(void);

This won't compile when CONFIG_SLABINFO is disabled.

static inline void dump_unreclaimable_slab(void)
{
}

when CONFIG_SLABINFO=n.

> +{
> +}
> +#endif
> +
>  void ___cache_free(struct kmem_cache *cache, void *x, unsigned long addr);
>  
>  #ifdef CONFIG_SLAB_FREELIST_RANDOM
> diff --git a/mm/slab_common.c b/mm/slab_common.c
> index 904a83b..90d9de3 100644
> --- a/mm/slab_common.c
> +++ b/mm/slab_common.c
> @@ -1272,6 +1272,32 @@ static int slab_show(struct seq_file *m, void *p)
>  	return 0;
>  }
>  
> +void dump_unreclaimable_slab(void)
> +{
> +	struct kmem_cache *s;
> +	struct slabinfo sinfo;
> +
> +	pr_info("Unreclaimable slab info:\n");
> +	pr_info("Name                      Used          Total\n");
> +
> +	/*
> +	 * Here acquiring slab_mutex is unnecessary since we don't prefer to
> +	 * get sleep in oom path right before kernel panic, and avoid race condition.
> +	 * Since it is already oom, so there should be not any big allocation
> +	 * which could change the statistics significantly.

The statistics themselves aren't protected by slab_mutex, it protects the 
iteration of the list.  I would suggest still taking the mutex here unless 
there's a reason to avoid it.

> +	 */
> +	list_for_each_entry(s, &slab_caches, list) {
> +		if (!is_root_cache(s))
> +			continue;

if (!(s->flags & SLAB_RECLAIM_ACCOUNT))
	continue;

No need to do the memset or get_slabinfo() if it's reclaimable, so just 
short-circuit it early in that case.

> +
> +		memset(&sinfo, 0, sizeof(sinfo));
> +		get_slabinfo(s, &sinfo);
> +
> +		if (!(s->flags & SLAB_RECLAIM_ACCOUNT) && sinfo.num_objs > 0)
> +			pr_info("%-17s %10luKB %10luKB\n", cache_name(s), (sinfo.active_objs * s->size) / 1024, (sinfo.num_objs * s->size) / 1024);
> +	}
> +}
> +
>  #if defined(CONFIG_MEMCG) && !defined(CONFIG_SLOB)
>  void *memcg_slab_start(struct seq_file *m, loff_t *pos)
>  {

Please run scripts/checkpatch.pl on your patch since there's some 
stylistic problems.  Otherwise, I think we need one more revision and 
we'll be good to go!

Re: [PATCH 2/2] mm: oom: show unreclaimable slab info when kernel panic

[David Rientjes]

On Thu, 21 Sep 2017, Yang Shi wrote:

> Kernel may panic when oom happens without killable process sometimes it
> is caused by huge unreclaimable slabs used by kernel.
> 
> Although kdump could help debug such problem, however, kdump is not
> available on all architectures and it might be malfunction sometime.
> And, since kernel already panic it is worthy capturing such information
> in dmesg to aid touble shooting.
> 
> Print out unreclaimable slab info (used size and total size) which
> actual memory usage is not zero (num_objs * size != 0) when panic_on_oom is set
> or no killable process. Since such information is just showed when kernel
> panic, so it will not lead too verbose message for normal oom.
> 
> The output looks like:
> 
> Unreclaimable slab info:
> Name                      Used          Total
> rpc_buffers               31KB         31KB
> rpc_tasks                  7KB          7KB
> ebitmap_node            1964KB       1964KB
> avtab_node              5024KB       5024KB
> xfs_buf                 1402KB       1402KB
> xfs_ili                  134KB        134KB
> xfs_efi_item             115KB        115KB
> xfs_efd_item             115KB        115KB
> xfs_buf_item             134KB        134KB
> xfs_log_item_desc        342KB        342KB
> xfs_trans               1412KB       1412KB
> xfs_ifork                212KB        212KB
> 
> Signed-off-by: Yang Shi <yang.s@alibaba-inc.com>
> ---
>  mm/oom_kill.c    |  3 +++
>  mm/slab.h        |  8 ++++++++
>  mm/slab_common.c | 26 ++++++++++++++++++++++++++
>  3 files changed, 37 insertions(+)
> 
> diff --git a/mm/oom_kill.c b/mm/oom_kill.c
> index 99736e0..bd48d34 100644
> --- a/mm/oom_kill.c
> +++ b/mm/oom_kill.c
> @@ -43,6 +43,7 @@
>  
>  #include <asm/tlb.h>
>  #include "internal.h"
> +#include "slab.h"
>  
>  #define CREATE_TRACE_POINTS
>  #include <trace/events/oom.h>
> @@ -960,6 +961,7 @@ static void check_panic_on_oom(struct oom_control *oc,
>  	if (is_sysrq_oom(oc))
>  		return;
>  	dump_header(oc, NULL);
> +	dump_unreclaimable_slab();
>  	panic("Out of memory: %s panic_on_oom is enabled\n",
>  		sysctl_panic_on_oom == 2 ? "compulsory" : "system-wide");
>  }
> @@ -1044,6 +1046,7 @@ bool out_of_memory(struct oom_control *oc)
>  	/* Found nothing?!?! Either we hang forever, or we panic. */
>  	if (!oc->chosen && !is_sysrq_oom(oc) && !is_memcg_oom(oc)) {
>  		dump_header(oc, NULL);
> +		dump_unreclaimable_slab();
>  		panic("Out of memory and no killable processes...\n");
>  	}
>  	if (oc->chosen && oc->chosen != (void *)-1UL) {
> diff --git a/mm/slab.h b/mm/slab.h
> index 0733628..734a92d 100644
> --- a/mm/slab.h
> +++ b/mm/slab.h
> @@ -505,6 +505,14 @@ static inline struct kmem_cache_node *get_node(struct kmem_cache *s, int node)
>  void memcg_slab_stop(struct seq_file *m, void *p);
>  int memcg_slab_show(struct seq_file *m, void *p);
>  
> +#ifdef CONFIG_SLABINFO
> +void dump_unreclaimable_slab(void);
> +#else
> +void dump_unreclaimable_slab(void);

This won't compile when CONFIG_SLABINFO is disabled.

static inline void dump_unreclaimable_slab(void)
{
}

when CONFIG_SLABINFO=n.

> +{
> +}
> +#endif
> +
>  void ___cache_free(struct kmem_cache *cache, void *x, unsigned long addr);
>  
>  #ifdef CONFIG_SLAB_FREELIST_RANDOM
> diff --git a/mm/slab_common.c b/mm/slab_common.c
> index 904a83b..90d9de3 100644
> --- a/mm/slab_common.c
> +++ b/mm/slab_common.c
> @@ -1272,6 +1272,32 @@ static int slab_show(struct seq_file *m, void *p)
>  	return 0;
>  }
>  
> +void dump_unreclaimable_slab(void)
> +{
> +	struct kmem_cache *s;
> +	struct slabinfo sinfo;
> +
> +	pr_info("Unreclaimable slab info:\n");
> +	pr_info("Name                      Used          Total\n");
> +
> +	/*
> +	 * Here acquiring slab_mutex is unnecessary since we don't prefer to
> +	 * get sleep in oom path right before kernel panic, and avoid race condition.
> +	 * Since it is already oom, so there should be not any big allocation
> +	 * which could change the statistics significantly.

The statistics themselves aren't protected by slab_mutex, it protects the 
iteration of the list.  I would suggest still taking the mutex here unless 
there's a reason to avoid it.

> +	 */
> +	list_for_each_entry(s, &slab_caches, list) {
> +		if (!is_root_cache(s))
> +			continue;

if (!(s->flags & SLAB_RECLAIM_ACCOUNT))
	continue;

No need to do the memset or get_slabinfo() if it's reclaimable, so just 
short-circuit it early in that case.

> +
> +		memset(&sinfo, 0, sizeof(sinfo));
> +		get_slabinfo(s, &sinfo);
> +
> +		if (!(s->flags & SLAB_RECLAIM_ACCOUNT) && sinfo.num_objs > 0)
> +			pr_info("%-17s %10luKB %10luKB\n", cache_name(s), (sinfo.active_objs * s->size) / 1024, (sinfo.num_objs * s->size) / 1024);
> +	}
> +}
> +
>  #if defined(CONFIG_MEMCG) && !defined(CONFIG_SLOB)
>  void *memcg_slab_start(struct seq_file *m, loff_t *pos)
>  {

Please run scripts/checkpatch.pl on your patch since there's some 
stylistic problems.  Otherwise, I think we need one more revision and 
we'll be good to go!

--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org.  For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>

Re: [PATCH 2/2] mm: oom: show unreclaimable slab info when kernel panic

[Yang Shi]

On 9/21/17 1:23 AM, David Rientjes wrote:
> On Thu, 21 Sep 2017, Yang Shi wrote:
> 
>> Kernel may panic when oom happens without killable process sometimes it
>> is caused by huge unreclaimable slabs used by kernel.
>>
>> Although kdump could help debug such problem, however, kdump is not
>> available on all architectures and it might be malfunction sometime.
>> And, since kernel already panic it is worthy capturing such information
>> in dmesg to aid touble shooting.
>>
>> Print out unreclaimable slab info (used size and total size) which
>> actual memory usage is not zero (num_objs * size != 0) when panic_on_oom is set
>> or no killable process. Since such information is just showed when kernel
>> panic, so it will not lead too verbose message for normal oom.
>>
>> The output looks like:
>>
>> Unreclaimable slab info:
>> Name                      Used          Total
>> rpc_buffers               31KB         31KB
>> rpc_tasks                  7KB          7KB
>> ebitmap_node            1964KB       1964KB
>> avtab_node              5024KB       5024KB
>> xfs_buf                 1402KB       1402KB
>> xfs_ili                  134KB        134KB
>> xfs_efi_item             115KB        115KB
>> xfs_efd_item             115KB        115KB
>> xfs_buf_item             134KB        134KB
>> xfs_log_item_desc        342KB        342KB
>> xfs_trans               1412KB       1412KB
>> xfs_ifork                212KB        212KB
>>
>> Signed-off-by: Yang Shi <yang.s@alibaba-inc.com>
>> ---
>>   mm/oom_kill.c    |  3 +++
>>   mm/slab.h        |  8 ++++++++
>>   mm/slab_common.c | 26 ++++++++++++++++++++++++++
>>   3 files changed, 37 insertions(+)
>>
>> diff --git a/mm/oom_kill.c b/mm/oom_kill.c
>> index 99736e0..bd48d34 100644
>> --- a/mm/oom_kill.c
>> +++ b/mm/oom_kill.c
>> @@ -43,6 +43,7 @@
>>   
>>   #include <asm/tlb.h>
>>   #include "internal.h"
>> +#include "slab.h"
>>   
>>   #define CREATE_TRACE_POINTS
>>   #include <trace/events/oom.h>
>> @@ -960,6 +961,7 @@ static void check_panic_on_oom(struct oom_control *oc,
>>   	if (is_sysrq_oom(oc))
>>   		return;
>>   	dump_header(oc, NULL);
>> +	dump_unreclaimable_slab();
>>   	panic("Out of memory: %s panic_on_oom is enabled\n",
>>   		sysctl_panic_on_oom == 2 ? "compulsory" : "system-wide");
>>   }
>> @@ -1044,6 +1046,7 @@ bool out_of_memory(struct oom_control *oc)
>>   	/* Found nothing?!?! Either we hang forever, or we panic. */
>>   	if (!oc->chosen && !is_sysrq_oom(oc) && !is_memcg_oom(oc)) {
>>   		dump_header(oc, NULL);
>> +		dump_unreclaimable_slab();
>>   		panic("Out of memory and no killable processes...\n");
>>   	}
>>   	if (oc->chosen && oc->chosen != (void *)-1UL) {
>> diff --git a/mm/slab.h b/mm/slab.h
>> index 0733628..734a92d 100644
>> --- a/mm/slab.h
>> +++ b/mm/slab.h
>> @@ -505,6 +505,14 @@ static inline struct kmem_cache_node *get_node(struct kmem_cache *s, int node)
>>   void memcg_slab_stop(struct seq_file *m, void *p);
>>   int memcg_slab_show(struct seq_file *m, void *p);
>>   
>> +#ifdef CONFIG_SLABINFO
>> +void dump_unreclaimable_slab(void);
>> +#else
>> +void dump_unreclaimable_slab(void);
> 
> This won't compile when CONFIG_SLABINFO is disabled.
> 
> static inline void dump_unreclaimable_slab(void)
> {
> }
> 
> when CONFIG_SLABINFO=n.

Thanks for pointing this. Just tested CONFIG_SLANINFO = n case. It can't 
be disabled in menuconfig, just manually modified init/Kconfig to test it.

> 
>> +{
>> +}
>> +#endif
>> +
>>   void ___cache_free(struct kmem_cache *cache, void *x, unsigned long addr);
>>   
>>   #ifdef CONFIG_SLAB_FREELIST_RANDOM
>> diff --git a/mm/slab_common.c b/mm/slab_common.c
>> index 904a83b..90d9de3 100644
>> --- a/mm/slab_common.c
>> +++ b/mm/slab_common.c
>> @@ -1272,6 +1272,32 @@ static int slab_show(struct seq_file *m, void *p)
>>   	return 0;
>>   }
>>   
>> +void dump_unreclaimable_slab(void)
>> +{
>> +	struct kmem_cache *s;
>> +	struct slabinfo sinfo;
>> +
>> +	pr_info("Unreclaimable slab info:\n");
>> +	pr_info("Name                      Used          Total\n");
>> +
>> +	/*
>> +	 * Here acquiring slab_mutex is unnecessary since we don't prefer to
>> +	 * get sleep in oom path right before kernel panic, and avoid race condition.
>> +	 * Since it is already oom, so there should be not any big allocation
>> +	 * which could change the statistics significantly.
> 
> The statistics themselves aren't protected by slab_mutex, it protects the
> iteration of the list.  I would suggest still taking the mutex here unless
> there's a reason to avoid it.

I don't think we prefer to sleep in oom path. Instead of acquiring the 
mutex, I think we can use list_for_each_entry_safe() to avoid the 
removal of kmem cache when printing the statistics.

> 
>> +	 */
>> +	list_for_each_entry(s, &slab_caches, list) {
>> +		if (!is_root_cache(s))
>> +			continue;
> 
> if (!(s->flags & SLAB_RECLAIM_ACCOUNT))
> 	continue;
> 
> No need to do the memset or get_slabinfo() if it's reclaimable, so just
> short-circuit it early in that case.
> 
>> +
>> +		memset(&sinfo, 0, sizeof(sinfo));
>> +		get_slabinfo(s, &sinfo);
>> +
>> +		if (!(s->flags & SLAB_RECLAIM_ACCOUNT) && sinfo.num_objs > 0)
>> +			pr_info("%-17s %10luKB %10luKB\n", cache_name(s), (sinfo.active_objs * s->size) / 1024, (sinfo.num_objs * s->size) / 1024);
>> +	}
>> +}
>> +
>>   #if defined(CONFIG_MEMCG) && !defined(CONFIG_SLOB)
>>   void *memcg_slab_start(struct seq_file *m, loff_t *pos)
>>   {
> 
> Please run scripts/checkpatch.pl on your patch since there's some
> stylistic problems.  Otherwise, I think we need one more revision and
> we'll be good to go!

Thanks, will prepare v5 soon.

Yang

> 

Re: [PATCH 2/2] mm: oom: show unreclaimable slab info when kernel panic

[Yang Shi]

On 9/21/17 1:23 AM, David Rientjes wrote:
> On Thu, 21 Sep 2017, Yang Shi wrote:
> 
>> Kernel may panic when oom happens without killable process sometimes it
>> is caused by huge unreclaimable slabs used by kernel.
>>
>> Although kdump could help debug such problem, however, kdump is not
>> available on all architectures and it might be malfunction sometime.
>> And, since kernel already panic it is worthy capturing such information
>> in dmesg to aid touble shooting.
>>
>> Print out unreclaimable slab info (used size and total size) which
>> actual memory usage is not zero (num_objs * size != 0) when panic_on_oom is set
>> or no killable process. Since such information is just showed when kernel
>> panic, so it will not lead too verbose message for normal oom.
>>
>> The output looks like:
>>
>> Unreclaimable slab info:
>> Name                      Used          Total
>> rpc_buffers               31KB         31KB
>> rpc_tasks                  7KB          7KB
>> ebitmap_node            1964KB       1964KB
>> avtab_node              5024KB       5024KB
>> xfs_buf                 1402KB       1402KB
>> xfs_ili                  134KB        134KB
>> xfs_efi_item             115KB        115KB
>> xfs_efd_item             115KB        115KB
>> xfs_buf_item             134KB        134KB
>> xfs_log_item_desc        342KB        342KB
>> xfs_trans               1412KB       1412KB
>> xfs_ifork                212KB        212KB
>>
>> Signed-off-by: Yang Shi <yang.s@alibaba-inc.com>
>> ---
>>   mm/oom_kill.c    |  3 +++
>>   mm/slab.h        |  8 ++++++++
>>   mm/slab_common.c | 26 ++++++++++++++++++++++++++
>>   3 files changed, 37 insertions(+)
>>
>> diff --git a/mm/oom_kill.c b/mm/oom_kill.c
>> index 99736e0..bd48d34 100644
>> --- a/mm/oom_kill.c
>> +++ b/mm/oom_kill.c
>> @@ -43,6 +43,7 @@
>>   
>>   #include <asm/tlb.h>
>>   #include "internal.h"
>> +#include "slab.h"
>>   
>>   #define CREATE_TRACE_POINTS
>>   #include <trace/events/oom.h>
>> @@ -960,6 +961,7 @@ static void check_panic_on_oom(struct oom_control *oc,
>>   	if (is_sysrq_oom(oc))
>>   		return;
>>   	dump_header(oc, NULL);
>> +	dump_unreclaimable_slab();
>>   	panic("Out of memory: %s panic_on_oom is enabled\n",
>>   		sysctl_panic_on_oom == 2 ? "compulsory" : "system-wide");
>>   }
>> @@ -1044,6 +1046,7 @@ bool out_of_memory(struct oom_control *oc)
>>   	/* Found nothing?!?! Either we hang forever, or we panic. */
>>   	if (!oc->chosen && !is_sysrq_oom(oc) && !is_memcg_oom(oc)) {
>>   		dump_header(oc, NULL);
>> +		dump_unreclaimable_slab();
>>   		panic("Out of memory and no killable processes...\n");
>>   	}
>>   	if (oc->chosen && oc->chosen != (void *)-1UL) {
>> diff --git a/mm/slab.h b/mm/slab.h
>> index 0733628..734a92d 100644
>> --- a/mm/slab.h
>> +++ b/mm/slab.h
>> @@ -505,6 +505,14 @@ static inline struct kmem_cache_node *get_node(struct kmem_cache *s, int node)
>>   void memcg_slab_stop(struct seq_file *m, void *p);
>>   int memcg_slab_show(struct seq_file *m, void *p);
>>   
>> +#ifdef CONFIG_SLABINFO
>> +void dump_unreclaimable_slab(void);
>> +#else
>> +void dump_unreclaimable_slab(void);
> 
> This won't compile when CONFIG_SLABINFO is disabled.
> 
> static inline void dump_unreclaimable_slab(void)
> {
> }
> 
> when CONFIG_SLABINFO=n.

Thanks for pointing this. Just tested CONFIG_SLANINFO = n case. It can't 
be disabled in menuconfig, just manually modified init/Kconfig to test it.

> 
>> +{
>> +}
>> +#endif
>> +
>>   void ___cache_free(struct kmem_cache *cache, void *x, unsigned long addr);
>>   
>>   #ifdef CONFIG_SLAB_FREELIST_RANDOM
>> diff --git a/mm/slab_common.c b/mm/slab_common.c
>> index 904a83b..90d9de3 100644
>> --- a/mm/slab_common.c
>> +++ b/mm/slab_common.c
>> @@ -1272,6 +1272,32 @@ static int slab_show(struct seq_file *m, void *p)
>>   	return 0;
>>   }
>>   
>> +void dump_unreclaimable_slab(void)
>> +{
>> +	struct kmem_cache *s;
>> +	struct slabinfo sinfo;
>> +
>> +	pr_info("Unreclaimable slab info:\n");
>> +	pr_info("Name                      Used          Total\n");
>> +
>> +	/*
>> +	 * Here acquiring slab_mutex is unnecessary since we don't prefer to
>> +	 * get sleep in oom path right before kernel panic, and avoid race condition.
>> +	 * Since it is already oom, so there should be not any big allocation
>> +	 * which could change the statistics significantly.
> 
> The statistics themselves aren't protected by slab_mutex, it protects the
> iteration of the list.  I would suggest still taking the mutex here unless
> there's a reason to avoid it.

I don't think we prefer to sleep in oom path. Instead of acquiring the 
mutex, I think we can use list_for_each_entry_safe() to avoid the 
removal of kmem cache when printing the statistics.

> 
>> +	 */
>> +	list_for_each_entry(s, &slab_caches, list) {
>> +		if (!is_root_cache(s))
>> +			continue;
> 
> if (!(s->flags & SLAB_RECLAIM_ACCOUNT))
> 	continue;
> 
> No need to do the memset or get_slabinfo() if it's reclaimable, so just
> short-circuit it early in that case.
> 
>> +
>> +		memset(&sinfo, 0, sizeof(sinfo));
>> +		get_slabinfo(s, &sinfo);
>> +
>> +		if (!(s->flags & SLAB_RECLAIM_ACCOUNT) && sinfo.num_objs > 0)
>> +			pr_info("%-17s %10luKB %10luKB\n", cache_name(s), (sinfo.active_objs * s->size) / 1024, (sinfo.num_objs * s->size) / 1024);
>> +	}
>> +}
>> +
>>   #if defined(CONFIG_MEMCG) && !defined(CONFIG_SLOB)
>>   void *memcg_slab_start(struct seq_file *m, loff_t *pos)
>>   {
> 
> Please run scripts/checkpatch.pl on your patch since there's some
> stylistic problems.  Otherwise, I think we need one more revision and
> we'll be good to go!

Thanks, will prepare v5 soon.

Yang

> 

--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org.  For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>

Re: [PATCH 0/2 v4] oom: capture unreclaimable slab info in oom message when kernel panic

[Michal Hocko]

On Thu 21-09-17 06:38:50, Yang Shi wrote:
> Recently we ran into a oom issue, kernel panic due to no killable process.
> The dmesg shows huge unreclaimable slabs used almost 100% memory, but kdump doesn't capture vmcore due to some reason.
> 
> So, it may sound better to capture unreclaimable slab info in oom message when kernel panic to aid trouble shooting and cover the corner case.
> Since kernel already panic, so capturing more information sounds worthy and doesn't bother normal oom killer.
> 
> With the patchset, tools/vm/slabinfo has a new option, "-U", to show unreclaimable slab only.
> 
> And, oom will print all non zero (num_objs * size != 0) unreclaimable slabs in oom killer message.

Well, I do undestand that this _might_ be useful but it also might
generates a _lot_ of output. The oom report can be quite verbose already
so is this something we want to have enabled by default?
-- 
Michal Hocko
SUSE Labs

Re: [PATCH 0/2 v4] oom: capture unreclaimable slab info in oom message when kernel panic

[Michal Hocko]

On Thu 21-09-17 06:38:50, Yang Shi wrote:
> Recently we ran into a oom issue, kernel panic due to no killable process.
> The dmesg shows huge unreclaimable slabs used almost 100% memory, but kdump doesn't capture vmcore due to some reason.
> 
> So, it may sound better to capture unreclaimable slab info in oom message when kernel panic to aid trouble shooting and cover the corner case.
> Since kernel already panic, so capturing more information sounds worthy and doesn't bother normal oom killer.
> 
> With the patchset, tools/vm/slabinfo has a new option, "-U", to show unreclaimable slab only.
> 
> And, oom will print all non zero (num_objs * size != 0) unreclaimable slabs in oom killer message.

Well, I do undestand that this _might_ be useful but it also might
generates a _lot_ of output. The oom report can be quite verbose already
so is this something we want to have enabled by default?
-- 
Michal Hocko
SUSE Labs

--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org.  For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>

Re: [PATCH 0/2 v4] oom: capture unreclaimable slab info in oom message when kernel panic

[Yang Shi]

On 9/25/17 7:23 AM, Michal Hocko wrote:
> On Thu 21-09-17 06:38:50, Yang Shi wrote:
>> Recently we ran into a oom issue, kernel panic due to no killable process.
>> The dmesg shows huge unreclaimable slabs used almost 100% memory, but kdump doesn't capture vmcore due to some reason.
>>
>> So, it may sound better to capture unreclaimable slab info in oom message when kernel panic to aid trouble shooting and cover the corner case.
>> Since kernel already panic, so capturing more information sounds worthy and doesn't bother normal oom killer.
>>
>> With the patchset, tools/vm/slabinfo has a new option, "-U", to show unreclaimable slab only.
>>
>> And, oom will print all non zero (num_objs * size != 0) unreclaimable slabs in oom killer message.
> 
> Well, I do undestand that this _might_ be useful but it also might
> generates a _lot_ of output. The oom report can be quite verbose already
> so is this something we want to have enabled by default?

The uneclaimable slub message will be just printed out when kernel panic 
(no killable process or panic_on_oom is set). So, it will not bother 
normal oom. Since kernel is already panic, so it might be preferred to 
have more information reported.

We definitely can add a proc knob to control it if we want to disable 
the message even if when kernel panic.

Thanks,
Yang

> 

Re: [PATCH 0/2 v4] oom: capture unreclaimable slab info in oom message when kernel panic

[Yang Shi]

On 9/25/17 7:23 AM, Michal Hocko wrote:
> On Thu 21-09-17 06:38:50, Yang Shi wrote:
>> Recently we ran into a oom issue, kernel panic due to no killable process.
>> The dmesg shows huge unreclaimable slabs used almost 100% memory, but kdump doesn't capture vmcore due to some reason.
>>
>> So, it may sound better to capture unreclaimable slab info in oom message when kernel panic to aid trouble shooting and cover the corner case.
>> Since kernel already panic, so capturing more information sounds worthy and doesn't bother normal oom killer.
>>
>> With the patchset, tools/vm/slabinfo has a new option, "-U", to show unreclaimable slab only.
>>
>> And, oom will print all non zero (num_objs * size != 0) unreclaimable slabs in oom killer message.
> 
> Well, I do undestand that this _might_ be useful but it also might
> generates a _lot_ of output. The oom report can be quite verbose already
> so is this something we want to have enabled by default?

The uneclaimable slub message will be just printed out when kernel panic 
(no killable process or panic_on_oom is set). So, it will not bother 
normal oom. Since kernel is already panic, so it might be preferred to 
have more information reported.

We definitely can add a proc knob to control it if we want to disable 
the message even if when kernel panic.

Thanks,
Yang

> 

--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org.  For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>

Re: [PATCH 0/2 v4] oom: capture unreclaimable slab info in oom message when kernel panic

[Michal Hocko]

On Mon 25-09-17 23:55:19, Yang Shi wrote:
> 
> 
> On 9/25/17 7:23 AM, Michal Hocko wrote:
> > On Thu 21-09-17 06:38:50, Yang Shi wrote:
> > > Recently we ran into a oom issue, kernel panic due to no killable process.
> > > The dmesg shows huge unreclaimable slabs used almost 100% memory, but kdump doesn't capture vmcore due to some reason.
> > > 
> > > So, it may sound better to capture unreclaimable slab info in oom message when kernel panic to aid trouble shooting and cover the corner case.
> > > Since kernel already panic, so capturing more information sounds worthy and doesn't bother normal oom killer.
> > > 
> > > With the patchset, tools/vm/slabinfo has a new option, "-U", to show unreclaimable slab only.
> > > 
> > > And, oom will print all non zero (num_objs * size != 0) unreclaimable slabs in oom killer message.
> > 
> > Well, I do undestand that this _might_ be useful but it also might
> > generates a _lot_ of output. The oom report can be quite verbose already
> > so is this something we want to have enabled by default?
> 
> The uneclaimable slub message will be just printed out when kernel panic (no
> killable process or panic_on_oom is set). So, it will not bother normal oom.
> Since kernel is already panic, so it might be preferred to have more
> information reported.

Well, this certainly depends. If you have a limited console output (e.g.
no serial console) then the additional information can easily scroll the
potentially much more useful information from the early oom report. We
already do have a control to enable/disable tasks dumping which can be
very long as well.
 
> We definitely can add a proc knob to control it if we want to disable the
> message even if when kernel panic.

Well, I do not have a strong opinion on this. I can see cases where this
kind of information would be useful but most OOM reports I have seen
were simply user space pinned memory. Slab memory leaks are seen very
seldom. Do you think a pr_dbg and slab stats for all ooms would be still
useful?
-- 
Michal Hocko
SUSE Labs

Re: [PATCH 0/2 v4] oom: capture unreclaimable slab info in oom message when kernel panic

[Michal Hocko]

On Mon 25-09-17 23:55:19, Yang Shi wrote:
> 
> 
> On 9/25/17 7:23 AM, Michal Hocko wrote:
> > On Thu 21-09-17 06:38:50, Yang Shi wrote:
> > > Recently we ran into a oom issue, kernel panic due to no killable process.
> > > The dmesg shows huge unreclaimable slabs used almost 100% memory, but kdump doesn't capture vmcore due to some reason.
> > > 
> > > So, it may sound better to capture unreclaimable slab info in oom message when kernel panic to aid trouble shooting and cover the corner case.
> > > Since kernel already panic, so capturing more information sounds worthy and doesn't bother normal oom killer.
> > > 
> > > With the patchset, tools/vm/slabinfo has a new option, "-U", to show unreclaimable slab only.
> > > 
> > > And, oom will print all non zero (num_objs * size != 0) unreclaimable slabs in oom killer message.
> > 
> > Well, I do undestand that this _might_ be useful but it also might
> > generates a _lot_ of output. The oom report can be quite verbose already
> > so is this something we want to have enabled by default?
> 
> The uneclaimable slub message will be just printed out when kernel panic (no
> killable process or panic_on_oom is set). So, it will not bother normal oom.
> Since kernel is already panic, so it might be preferred to have more
> information reported.

Well, this certainly depends. If you have a limited console output (e.g.
no serial console) then the additional information can easily scroll the
potentially much more useful information from the early oom report. We
already do have a control to enable/disable tasks dumping which can be
very long as well.
 
> We definitely can add a proc knob to control it if we want to disable the
> message even if when kernel panic.

Well, I do not have a strong opinion on this. I can see cases where this
kind of information would be useful but most OOM reports I have seen
were simply user space pinned memory. Slab memory leaks are seen very
seldom. Do you think a pr_dbg and slab stats for all ooms would be still
useful?
-- 
Michal Hocko
SUSE Labs

--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org.  For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>

Re: [PATCH 0/2 v4] oom: capture unreclaimable slab info in oom message when kernel panic

[Yang Shi]

On 9/25/17 1:32 PM, Michal Hocko wrote:
> On Mon 25-09-17 23:55:19, Yang Shi wrote:
>>
>>
>> On 9/25/17 7:23 AM, Michal Hocko wrote:
>>> On Thu 21-09-17 06:38:50, Yang Shi wrote:
>>>> Recently we ran into a oom issue, kernel panic due to no killable process.
>>>> The dmesg shows huge unreclaimable slabs used almost 100% memory, but kdump doesn't capture vmcore due to some reason.
>>>>
>>>> So, it may sound better to capture unreclaimable slab info in oom message when kernel panic to aid trouble shooting and cover the corner case.
>>>> Since kernel already panic, so capturing more information sounds worthy and doesn't bother normal oom killer.
>>>>
>>>> With the patchset, tools/vm/slabinfo has a new option, "-U", to show unreclaimable slab only.
>>>>
>>>> And, oom will print all non zero (num_objs * size != 0) unreclaimable slabs in oom killer message.
>>>
>>> Well, I do undestand that this _might_ be useful but it also might
>>> generates a _lot_ of output. The oom report can be quite verbose already
>>> so is this something we want to have enabled by default?
>>
>> The uneclaimable slub message will be just printed out when kernel panic (no
>> killable process or panic_on_oom is set). So, it will not bother normal oom.
>> Since kernel is already panic, so it might be preferred to have more
>> information reported.
> 
> Well, this certainly depends. If you have a limited console output (e.g.
> no serial console) then the additional information can easily scroll the
> potentially much more useful information from the early oom report. We
> already do have a control to enable/disable tasks dumping which can be
> very long as well.
>   
>> We definitely can add a proc knob to control it if we want to disable the
>> message even if when kernel panic.
> 
> Well, I do not have a strong opinion on this. I can see cases where this
> kind of information would be useful but most OOM reports I have seen
> were simply user space pinned memory. Slab memory leaks are seen very
> seldom. Do you think a pr_dbg and slab stats for all ooms would be still
> useful?

It might be. But, we can use slabinfo to get all slab stats in non-panic 
oom case, patch 1/2 (tools: slabinfo: add "-U" option to show 
unreclaimable slabs only) should be used to cover this case.

Maybe we can set a unreclaimable slab/total mem ratio. For example, when 
unreclaimable slab size >= 50% total memory size, then we print out slab 
stats in oom? And, the ratio might be adjustable in /proc.

Or just replace pr_info to pr_debug. Once oom happens, if there are a 
lot unreclaimable slabs consumed, we can just enable the debug info then 
try to reproduce.

Thanks,
Yang

> 

Re: [PATCH 0/2 v4] oom: capture unreclaimable slab info in oom message when kernel panic

[Yang Shi]

On 9/25/17 1:32 PM, Michal Hocko wrote:
> On Mon 25-09-17 23:55:19, Yang Shi wrote:
>>
>>
>> On 9/25/17 7:23 AM, Michal Hocko wrote:
>>> On Thu 21-09-17 06:38:50, Yang Shi wrote:
>>>> Recently we ran into a oom issue, kernel panic due to no killable process.
>>>> The dmesg shows huge unreclaimable slabs used almost 100% memory, but kdump doesn't capture vmcore due to some reason.
>>>>
>>>> So, it may sound better to capture unreclaimable slab info in oom message when kernel panic to aid trouble shooting and cover the corner case.
>>>> Since kernel already panic, so capturing more information sounds worthy and doesn't bother normal oom killer.
>>>>
>>>> With the patchset, tools/vm/slabinfo has a new option, "-U", to show unreclaimable slab only.
>>>>
>>>> And, oom will print all non zero (num_objs * size != 0) unreclaimable slabs in oom killer message.
>>>
>>> Well, I do undestand that this _might_ be useful but it also might
>>> generates a _lot_ of output. The oom report can be quite verbose already
>>> so is this something we want to have enabled by default?
>>
>> The uneclaimable slub message will be just printed out when kernel panic (no
>> killable process or panic_on_oom is set). So, it will not bother normal oom.
>> Since kernel is already panic, so it might be preferred to have more
>> information reported.
> 
> Well, this certainly depends. If you have a limited console output (e.g.
> no serial console) then the additional information can easily scroll the
> potentially much more useful information from the early oom report. We
> already do have a control to enable/disable tasks dumping which can be
> very long as well.
>   
>> We definitely can add a proc knob to control it if we want to disable the
>> message even if when kernel panic.
> 
> Well, I do not have a strong opinion on this. I can see cases where this
> kind of information would be useful but most OOM reports I have seen
> were simply user space pinned memory. Slab memory leaks are seen very
> seldom. Do you think a pr_dbg and slab stats for all ooms would be still
> useful?

It might be. But, we can use slabinfo to get all slab stats in non-panic 
oom case, patch 1/2 (tools: slabinfo: add "-U" option to show 
unreclaimable slabs only) should be used to cover this case.

Maybe we can set a unreclaimable slab/total mem ratio. For example, when 
unreclaimable slab size >= 50% total memory size, then we print out slab 
stats in oom? And, the ratio might be adjustable in /proc.

Or just replace pr_info to pr_debug. Once oom happens, if there are a 
lot unreclaimable slabs consumed, we can just enable the debug info then 
try to reproduce.

Thanks,
Yang

> 

--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org.  For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>

Re: [PATCH 0/2 v4] oom: capture unreclaimable slab info in oom message when kernel panic

[Michal Hocko]

On Tue 26-09-17 05:52:50, Yang Shi wrote:
> Maybe we can set a unreclaimable slab/total mem ratio. For example, when
> unreclaimable slab size >= 50% total memory size, then we print out slab
> stats in oom? And, the ratio might be adjustable in /proc.

This sounds quite reasonable to me. I would compare the slab amount to
the directly user backed memory (LRU ages) though.

-- 
Michal Hocko
SUSE Labs

Re: [PATCH 0/2 v4] oom: capture unreclaimable slab info in oom message when kernel panic

[Michal Hocko]

On Tue 26-09-17 05:52:50, Yang Shi wrote:
> Maybe we can set a unreclaimable slab/total mem ratio. For example, when
> unreclaimable slab size >= 50% total memory size, then we print out slab
> stats in oom? And, the ratio might be adjustable in /proc.

This sounds quite reasonable to me. I would compare the slab amount to
the directly user backed memory (LRU ages) though.

-- 
Michal Hocko
SUSE Labs

--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org.  For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>

[PATCH 0/2 v8] oom: capture unreclaimable slab info in oom message

[Yang Shi]

Recently we ran into a oom issue, kernel panic due to no killable process.
The dmesg shows huge unreclaimable slabs used almost 100% memory, but kdump doesn't capture vmcore due to some reason.

So, it may sound better to capture unreclaimable slab info in oom message when kernel panic to aid trouble shooting and cover the corner case.
Since kernel already panic, so capturing more information sounds worthy and doesn't bother normal oom killer.

With the patchset, tools/vm/slabinfo has a new option, "-U", to show unreclaimable slab only.

And, oom will print all non zero (num_objs * size != 0) unreclaimable slabs in oom killer message.

For details, please see the commit log for each commit.

Changelog v7 —> v8:
* Adopted Michal’s suggestion to dump unreclaim slab info when unreclaimable slabs amount > total user memory. Not only in oom panic path.

Changelog v6 -> v7:
* Added unreclaim_slabs_oom_ratio proc knob, unreclaimable slabs info will be dumped when unreclaimable slabs amount : all user memory > the ratio

Changelog v5 —> v6:
* Fixed a checkpatch.pl warning for patch #2

Changelog v4 —> v5:
* Solved the comments from David
* Build test SLABINFO = n

Changelog v3 —> v4:
* Solved the comments from David
* Added David’s Acked-by in patch 1

Changelog v2 —> v3:
* Show used size and total size of each kmem cache per David’s comment

Changelog v1 —> v2:
* Removed the original patch 1 (“mm: slab: output reclaimable flag in /proc/slabinfo”) since Christoph suggested it might break the compatibility and /proc/slabinfo is legacy
* Added Christoph’s Acked-by
* Removed acquiring slab_mutex per Tetsuo’s comment


Yang Shi (2):
      tools: slabinfo: add "-U" option to show unreclaimable slabs only
      mm: oom: show unreclaimable slab info when unreclaimable slabs > user memory

 mm/oom_kill.c       | 22 ++++++++++++++++++++++
 mm/slab.h           |  8 ++++++++
 mm/slab_common.c    | 29 +++++++++++++++++++++++++++++
 tools/vm/slabinfo.c | 11 ++++++++++-
 4 files changed, 69 insertions(+), 1 deletion(-)

[PATCH 1/2] tools: slabinfo: add "-U" option to show unreclaimable slabs only

[Yang Shi]

Add "-U" option to show unreclaimable slabs only.

"-U" and "-S" together can tell us what unreclaimable slabs use the most
memory to help debug huge unreclaimable slabs issue.

Signed-off-by: Yang Shi <yang.s@alibaba-inc.com>
Acked-by: Christoph Lameter <cl@linux.com>
Acked-by: David Rientjes <rientjes@google.com>
---
 tools/vm/slabinfo.c | 11 ++++++++++-
 1 file changed, 10 insertions(+), 1 deletion(-)

diff --git a/tools/vm/slabinfo.c b/tools/vm/slabinfo.c
index b9d34b3..de8fa11 100644
--- a/tools/vm/slabinfo.c
+++ b/tools/vm/slabinfo.c
@@ -83,6 +83,7 @@ struct aliasinfo {
 int sort_loss;
 int extended_totals;
 int show_bytes;
+int unreclaim_only;
 
 /* Debug options */
 int sanity;
@@ -132,6 +133,7 @@ static void usage(void)
 		"-L|--Loss              Sort by loss\n"
 		"-X|--Xtotals           Show extended summary information\n"
 		"-B|--Bytes             Show size in bytes\n"
+		"-U|--Unreclaim		Show unreclaimable slabs only\n"
 		"\nValid debug options (FZPUT may be combined)\n"
 		"a / A          Switch on all debug options (=FZUP)\n"
 		"-              Switch off all debug options\n"
@@ -568,6 +570,9 @@ static void slabcache(struct slabinfo *s)
 	if (strcmp(s->name, "*") == 0)
 		return;
 
+	if (unreclaim_only && s->reclaim_account)
+		return;
+
 	if (actual_slabs == 1) {
 		report(s);
 		return;
@@ -1346,6 +1351,7 @@ struct option opts[] = {
 	{ "Loss", no_argument, NULL, 'L'},
 	{ "Xtotals", no_argument, NULL, 'X'},
 	{ "Bytes", no_argument, NULL, 'B'},
+	{ "Unreclaim", no_argument, NULL, 'U'},
 	{ NULL, 0, NULL, 0 }
 };
 
@@ -1357,7 +1363,7 @@ int main(int argc, char *argv[])
 
 	page_size = getpagesize();
 
-	while ((c = getopt_long(argc, argv, "aAd::Defhil1noprstvzTSN:LXB",
+	while ((c = getopt_long(argc, argv, "aAd::Defhil1noprstvzTSN:LXBU",
 						opts, NULL)) != -1)
 		switch (c) {
 		case '1':
@@ -1438,6 +1444,9 @@ int main(int argc, char *argv[])
 		case 'B':
 			show_bytes = 1;
 			break;
+		case 'U':
+			unreclaim_only = 1;
+			break;
 		default:
 			fatal("%s: Invalid option '%c'\n", argv[0], optopt);
 
-- 
1.8.3.1

[PATCH 1/2] tools: slabinfo: add "-U" option to show unreclaimable slabs only

[Yang Shi]

Add "-U" option to show unreclaimable slabs only.

"-U" and "-S" together can tell us what unreclaimable slabs use the most
memory to help debug huge unreclaimable slabs issue.

Signed-off-by: Yang Shi <yang.s@alibaba-inc.com>
Acked-by: Christoph Lameter <cl@linux.com>
Acked-by: David Rientjes <rientjes@google.com>
---
 tools/vm/slabinfo.c | 11 ++++++++++-
 1 file changed, 10 insertions(+), 1 deletion(-)

diff --git a/tools/vm/slabinfo.c b/tools/vm/slabinfo.c
index b9d34b3..de8fa11 100644
--- a/tools/vm/slabinfo.c
+++ b/tools/vm/slabinfo.c
@@ -83,6 +83,7 @@ struct aliasinfo {
 int sort_loss;
 int extended_totals;
 int show_bytes;
+int unreclaim_only;
 
 /* Debug options */
 int sanity;
@@ -132,6 +133,7 @@ static void usage(void)
 		"-L|--Loss              Sort by loss\n"
 		"-X|--Xtotals           Show extended summary information\n"
 		"-B|--Bytes             Show size in bytes\n"
+		"-U|--Unreclaim		Show unreclaimable slabs only\n"
 		"\nValid debug options (FZPUT may be combined)\n"
 		"a / A          Switch on all debug options (=FZUP)\n"
 		"-              Switch off all debug options\n"
@@ -568,6 +570,9 @@ static void slabcache(struct slabinfo *s)
 	if (strcmp(s->name, "*") == 0)
 		return;
 
+	if (unreclaim_only && s->reclaim_account)
+		return;
+
 	if (actual_slabs == 1) {
 		report(s);
 		return;
@@ -1346,6 +1351,7 @@ struct option opts[] = {
 	{ "Loss", no_argument, NULL, 'L'},
 	{ "Xtotals", no_argument, NULL, 'X'},
 	{ "Bytes", no_argument, NULL, 'B'},
+	{ "Unreclaim", no_argument, NULL, 'U'},
 	{ NULL, 0, NULL, 0 }
 };
 
@@ -1357,7 +1363,7 @@ int main(int argc, char *argv[])
 
 	page_size = getpagesize();
 
-	while ((c = getopt_long(argc, argv, "aAd::Defhil1noprstvzTSN:LXB",
+	while ((c = getopt_long(argc, argv, "aAd::Defhil1noprstvzTSN:LXBU",
 						opts, NULL)) != -1)
 		switch (c) {
 		case '1':
@@ -1438,6 +1444,9 @@ int main(int argc, char *argv[])
 		case 'B':
 			show_bytes = 1;
 			break;
+		case 'U':
+			unreclaim_only = 1;
+			break;
 		default:
 			fatal("%s: Invalid option '%c'\n", argv[0], optopt);
 
-- 
1.8.3.1

--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org.  For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>

[PATCH 0/2 v6] oom: capture unreclaimable slab info in oom message when kernel panic

[Yang Shi]

Recently we ran into a oom issue, kernel panic due to no killable process.
The dmesg shows huge unreclaimable slabs used almost 100% memory, but kdump doesn't capture vmcore due to some reason.

So, it may sound better to capture unreclaimable slab info in oom message when kernel panic to aid trouble shooting and cover the corner case.
Since kernel already panic, so capturing more information sounds worthy and doesn't bother normal oom killer.

With the patchset, tools/vm/slabinfo has a new option, "-U", to show unreclaimable slab only.

And, oom will print all non zero (num_objs * size != 0) unreclaimable slabs in oom killer message.

For details, please see the commit log for each commit.

Changelog v5 -> v6:
* Fixed a checkpatch.pl warning for patch #2, zero error and warning for both patches

Changelog v4 -> v5:
* Solved the comments from David
* Build test SLABINFO = n

Changelog v3 -> v4:
* Solved the comments from David
* Added David’s Acked-by in patch 1

Changelog v2 -> v3:
* Show used size and total size of each kmem cache per David’s comment

Changelog v1 -> v2:
* Removed the original patch 1 (“mm: slab: output reclaimable flag in /proc/slabinfo”) since Christoph suggested it might break the compatibility and /proc/slabinfo is legacy
* Added Christoph’s Acked-by
* Removed acquiring slab_mutex per Tetsuo’s comment

Yang Shi (2):
      tools: slabinfo: add "-U" option to show unreclaimable slabs only
      mm: oom: show unreclaimable slab info when kernel panic

 mm/oom_kill.c       |  3 +++
 mm/slab.h           |  8 ++++++++
 mm/slab_common.c    | 29 +++++++++++++++++++++++++++++
 tools/vm/slabinfo.c | 11 ++++++++++-
 4 files changed, 50 insertions(+), 1 deletion(-)

[PATCH 1/2] tools: slabinfo: add "-U" option to show unreclaimable slabs only

[Yang Shi]

Add "-U" option to show unreclaimable slabs only.

"-U" and "-S" together can tell us what unreclaimable slabs use the most
memory to help debug huge unreclaimable slabs issue.

Signed-off-by: Yang Shi <yang.s@alibaba-inc.com>
Acked-by: Christoph Lameter <cl@linux.com>
Acked-by: David Rientjes <rientjes@google.com>
---
 tools/vm/slabinfo.c | 11 ++++++++++-
 1 file changed, 10 insertions(+), 1 deletion(-)

diff --git a/tools/vm/slabinfo.c b/tools/vm/slabinfo.c
index b9d34b3..de8fa11 100644
--- a/tools/vm/slabinfo.c
+++ b/tools/vm/slabinfo.c
@@ -83,6 +83,7 @@ struct aliasinfo {
 int sort_loss;
 int extended_totals;
 int show_bytes;
+int unreclaim_only;
 
 /* Debug options */
 int sanity;
@@ -132,6 +133,7 @@ static void usage(void)
 		"-L|--Loss              Sort by loss\n"
 		"-X|--Xtotals           Show extended summary information\n"
 		"-B|--Bytes             Show size in bytes\n"
+		"-U|--Unreclaim		Show unreclaimable slabs only\n"
 		"\nValid debug options (FZPUT may be combined)\n"
 		"a / A          Switch on all debug options (=FZUP)\n"
 		"-              Switch off all debug options\n"
@@ -568,6 +570,9 @@ static void slabcache(struct slabinfo *s)
 	if (strcmp(s->name, "*") == 0)
 		return;
 
+	if (unreclaim_only && s->reclaim_account)
+		return;
+
 	if (actual_slabs == 1) {
 		report(s);
 		return;
@@ -1346,6 +1351,7 @@ struct option opts[] = {
 	{ "Loss", no_argument, NULL, 'L'},
 	{ "Xtotals", no_argument, NULL, 'X'},
 	{ "Bytes", no_argument, NULL, 'B'},
+	{ "Unreclaim", no_argument, NULL, 'U'},
 	{ NULL, 0, NULL, 0 }
 };
 
@@ -1357,7 +1363,7 @@ int main(int argc, char *argv[])
 
 	page_size = getpagesize();
 
-	while ((c = getopt_long(argc, argv, "aAd::Defhil1noprstvzTSN:LXB",
+	while ((c = getopt_long(argc, argv, "aAd::Defhil1noprstvzTSN:LXBU",
 						opts, NULL)) != -1)
 		switch (c) {
 		case '1':
@@ -1438,6 +1444,9 @@ int main(int argc, char *argv[])
 		case 'B':
 			show_bytes = 1;
 			break;
+		case 'U':
+			unreclaim_only = 1;
+			break;
 		default:
 			fatal("%s: Invalid option '%c'\n", argv[0], optopt);
 
-- 
1.8.3.1

[PATCH 1/2] tools: slabinfo: add "-U" option to show unreclaimable slabs only

[Yang Shi]

Add "-U" option to show unreclaimable slabs only.

"-U" and "-S" together can tell us what unreclaimable slabs use the most
memory to help debug huge unreclaimable slabs issue.

Signed-off-by: Yang Shi <yang.s@alibaba-inc.com>
Acked-by: Christoph Lameter <cl@linux.com>
Acked-by: David Rientjes <rientjes@google.com>
---
 tools/vm/slabinfo.c | 11 ++++++++++-
 1 file changed, 10 insertions(+), 1 deletion(-)

diff --git a/tools/vm/slabinfo.c b/tools/vm/slabinfo.c
index b9d34b3..de8fa11 100644
--- a/tools/vm/slabinfo.c
+++ b/tools/vm/slabinfo.c
@@ -83,6 +83,7 @@ struct aliasinfo {
 int sort_loss;
 int extended_totals;
 int show_bytes;
+int unreclaim_only;
 
 /* Debug options */
 int sanity;
@@ -132,6 +133,7 @@ static void usage(void)
 		"-L|--Loss              Sort by loss\n"
 		"-X|--Xtotals           Show extended summary information\n"
 		"-B|--Bytes             Show size in bytes\n"
+		"-U|--Unreclaim		Show unreclaimable slabs only\n"
 		"\nValid debug options (FZPUT may be combined)\n"
 		"a / A          Switch on all debug options (=FZUP)\n"
 		"-              Switch off all debug options\n"
@@ -568,6 +570,9 @@ static void slabcache(struct slabinfo *s)
 	if (strcmp(s->name, "*") == 0)
 		return;
 
+	if (unreclaim_only && s->reclaim_account)
+		return;
+
 	if (actual_slabs == 1) {
 		report(s);
 		return;
@@ -1346,6 +1351,7 @@ struct option opts[] = {
 	{ "Loss", no_argument, NULL, 'L'},
 	{ "Xtotals", no_argument, NULL, 'X'},
 	{ "Bytes", no_argument, NULL, 'B'},
+	{ "Unreclaim", no_argument, NULL, 'U'},
 	{ NULL, 0, NULL, 0 }
 };
 
@@ -1357,7 +1363,7 @@ int main(int argc, char *argv[])
 
 	page_size = getpagesize();
 
-	while ((c = getopt_long(argc, argv, "aAd::Defhil1noprstvzTSN:LXB",
+	while ((c = getopt_long(argc, argv, "aAd::Defhil1noprstvzTSN:LXBU",
 						opts, NULL)) != -1)
 		switch (c) {
 		case '1':
@@ -1438,6 +1444,9 @@ int main(int argc, char *argv[])
 		case 'B':
 			show_bytes = 1;
 			break;
+		case 'U':
+			unreclaim_only = 1;
+			break;
 		default:
 			fatal("%s: Invalid option '%c'\n", argv[0], optopt);
 
-- 
1.8.3.1

--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org.  For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>

[PATCH 0/2 v5] oom: capture unreclaimable slab info in oom message when kernel panic

[Yang Shi]

Recently we ran into a oom issue, kernel panic due to no killable process.
The dmesg shows huge unreclaimable slabs used almost 100% memory, but kdump doesn't capture vmcore due to some reason.

So, it may sound better to capture unreclaimable slab info in oom message when kernel panic to aid trouble shooting and cover the corner case.
Since kernel already panic, so capturing more information sounds worthy and doesn't bother normal oom killer.

With the patchset, tools/vm/slabinfo has a new option, "-U", to show unreclaimable slab only.

And, oom will print all non zero (num_objs * size != 0) unreclaimable slabs in oom killer message.

For details, please see the commit log for each commit.

Changelog v4 —> v5:
* Solved the comments from David
* Build test SLABINFO = n

Changelog v3 —> v4:
* Solved the comments from David
* Added David’s Acked-by in patch 1

Changelog v2 —> v3:
* Show used size and total size of each kmem cache per David’s comment

Changelog v1 —> v2:
* Removed the original patch 1 (“mm: slab: output reclaimable flag in /proc/slabinfo”) since Christoph suggested it might break the compatibility and /proc/slabinfo is legacy
* Added Christoph’s Acked-by
* Removed acquiring slab_mutex per Tetsuo’s comment

Yang Shi (2):
      tools: slabinfo: add "-U" option to show unreclaimable slabs only
      mm: oom: show unreclaimable slab info when kernel panic

 mm/oom_kill.c       |  3 +++
 mm/slab.h           |  8 ++++++++
 mm/slab_common.c    | 29 +++++++++++++++++++++++++++++
 tools/vm/slabinfo.c | 11 ++++++++++-
 4 files changed, 50 insertions(+), 1 deletion(-)

[PATCH 1/2] tools: slabinfo: add "-U" option to show unreclaimable slabs only

[Yang Shi]

Add "-U" option to show unreclaimable slabs only.

"-U" and "-S" together can tell us what unreclaimable slabs use the most
memory to help debug huge unreclaimable slabs issue.

Signed-off-by: Yang Shi <yang.s@alibaba-inc.com>
Acked-by: Christoph Lameter <cl@linux.com>
Acked-by: David Rientjes <rientjes@google.com>
---
 tools/vm/slabinfo.c | 11 ++++++++++-
 1 file changed, 10 insertions(+), 1 deletion(-)

diff --git a/tools/vm/slabinfo.c b/tools/vm/slabinfo.c
index b9d34b3..de8fa11 100644
--- a/tools/vm/slabinfo.c
+++ b/tools/vm/slabinfo.c
@@ -83,6 +83,7 @@ struct aliasinfo {
 int sort_loss;
 int extended_totals;
 int show_bytes;
+int unreclaim_only;
 
 /* Debug options */
 int sanity;
@@ -132,6 +133,7 @@ static void usage(void)
 		"-L|--Loss              Sort by loss\n"
 		"-X|--Xtotals           Show extended summary information\n"
 		"-B|--Bytes             Show size in bytes\n"
+		"-U|--Unreclaim		Show unreclaimable slabs only\n"
 		"\nValid debug options (FZPUT may be combined)\n"
 		"a / A          Switch on all debug options (=FZUP)\n"
 		"-              Switch off all debug options\n"
@@ -568,6 +570,9 @@ static void slabcache(struct slabinfo *s)
 	if (strcmp(s->name, "*") == 0)
 		return;
 
+	if (unreclaim_only && s->reclaim_account)
+		return;
+
 	if (actual_slabs == 1) {
 		report(s);
 		return;
@@ -1346,6 +1351,7 @@ struct option opts[] = {
 	{ "Loss", no_argument, NULL, 'L'},
 	{ "Xtotals", no_argument, NULL, 'X'},
 	{ "Bytes", no_argument, NULL, 'B'},
+	{ "Unreclaim", no_argument, NULL, 'U'},
 	{ NULL, 0, NULL, 0 }
 };
 
@@ -1357,7 +1363,7 @@ int main(int argc, char *argv[])
 
 	page_size = getpagesize();
 
-	while ((c = getopt_long(argc, argv, "aAd::Defhil1noprstvzTSN:LXB",
+	while ((c = getopt_long(argc, argv, "aAd::Defhil1noprstvzTSN:LXBU",
 						opts, NULL)) != -1)
 		switch (c) {
 		case '1':
@@ -1438,6 +1444,9 @@ int main(int argc, char *argv[])
 		case 'B':
 			show_bytes = 1;
 			break;
+		case 'U':
+			unreclaim_only = 1;
+			break;
 		default:
 			fatal("%s: Invalid option '%c'\n", argv[0], optopt);
 
-- 
1.8.3.1

[PATCH 1/2] tools: slabinfo: add "-U" option to show unreclaimable slabs only

[Yang Shi]

Add "-U" option to show unreclaimable slabs only.

"-U" and "-S" together can tell us what unreclaimable slabs use the most
memory to help debug huge unreclaimable slabs issue.

Signed-off-by: Yang Shi <yang.s@alibaba-inc.com>
Acked-by: Christoph Lameter <cl@linux.com>
Acked-by: David Rientjes <rientjes@google.com>
---
 tools/vm/slabinfo.c | 11 ++++++++++-
 1 file changed, 10 insertions(+), 1 deletion(-)

diff --git a/tools/vm/slabinfo.c b/tools/vm/slabinfo.c
index b9d34b3..de8fa11 100644
--- a/tools/vm/slabinfo.c
+++ b/tools/vm/slabinfo.c
@@ -83,6 +83,7 @@ struct aliasinfo {
 int sort_loss;
 int extended_totals;
 int show_bytes;
+int unreclaim_only;
 
 /* Debug options */
 int sanity;
@@ -132,6 +133,7 @@ static void usage(void)
 		"-L|--Loss              Sort by loss\n"
 		"-X|--Xtotals           Show extended summary information\n"
 		"-B|--Bytes             Show size in bytes\n"
+		"-U|--Unreclaim		Show unreclaimable slabs only\n"
 		"\nValid debug options (FZPUT may be combined)\n"
 		"a / A          Switch on all debug options (=FZUP)\n"
 		"-              Switch off all debug options\n"
@@ -568,6 +570,9 @@ static void slabcache(struct slabinfo *s)
 	if (strcmp(s->name, "*") == 0)
 		return;
 
+	if (unreclaim_only && s->reclaim_account)
+		return;
+
 	if (actual_slabs == 1) {
 		report(s);
 		return;
@@ -1346,6 +1351,7 @@ struct option opts[] = {
 	{ "Loss", no_argument, NULL, 'L'},
 	{ "Xtotals", no_argument, NULL, 'X'},
 	{ "Bytes", no_argument, NULL, 'B'},
+	{ "Unreclaim", no_argument, NULL, 'U'},
 	{ NULL, 0, NULL, 0 }
 };
 
@@ -1357,7 +1363,7 @@ int main(int argc, char *argv[])
 
 	page_size = getpagesize();
 
-	while ((c = getopt_long(argc, argv, "aAd::Defhil1noprstvzTSN:LXB",
+	while ((c = getopt_long(argc, argv, "aAd::Defhil1noprstvzTSN:LXBU",
 						opts, NULL)) != -1)
 		switch (c) {
 		case '1':
@@ -1438,6 +1444,9 @@ int main(int argc, char *argv[])
 		case 'B':
 			show_bytes = 1;
 			break;
+		case 'U':
+			unreclaim_only = 1;
+			break;
 		default:
 			fatal("%s: Invalid option '%c'\n", argv[0], optopt);
 
-- 
1.8.3.1

--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org.  For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>

[RFC v3] oom: capture unreclaimable slab info in oom message when kernel panic

[Yang Shi]

Recently we ran into a oom issue, kernel panic due to no killable process.
The dmesg shows huge unreclaimable slabs used almost 100% memory, but kdump doesn't capture vmcore due to some reason.

So, it may sound better to capture unreclaimable slab info in oom message when kernel panic to aid trouble shooting and cover the corner case.
Since kernel already panic, so capturing more information sounds worthy and doesn't bother normal oom killer.

With the patchset, tools/vm/slabinfo has a new option, "-U", to show unreclaimable slab only.

And, oom will print all non zero (num_objs * size != 0) unreclaimable slabs in oom killer message.

For details, please see the commit log for each commit.

Changelog v2 —> v3:
* Show used size and total size of each kmem cache per David’s comment

Changelog v1 —> v2:
* Removed the original patch 1 (“mm: slab: output reclaimable flag in /proc/slabinfo”) since Christoph suggested it might break the compatibility and /proc/slabinfo is legacy
* Added Christoph’s Acked-by
* Removed acquiring slab_mutex per Tetsuo’s comment


Yang Shi (2):
      tools: slabinfo: add "-U" option to show unreclaimable slabs only
      mm: oom: show unreclaimable slab info when kernel panic

 mm/oom_kill.c       | 13 +++++++++++--
 mm/slab.c           |  1 +
 mm/slab.h           |  7 +++++++
 mm/slab_common.c    | 31 +++++++++++++++++++++++++++++++
 mm/slub.c           |  1 +
 tools/vm/slabinfo.c | 11 ++++++++++-
 6 files changed, 61 insertions(+), 3 deletions(-)

[PATCH 1/2] tools: slabinfo: add "-U" option to show unreclaimable slabs only

[Yang Shi]

Add "-U" option to show unreclaimable slabs only.

"-U" and "-S" together can tell us what unreclaimable slabs use the most
memory to help debug huge unreclaimable slabs issue.

Signed-off-by: Yang Shi <yang.s@alibaba-inc.com>
Acked-by: Christoph Lameter <cl@linux.com>
---
 tools/vm/slabinfo.c | 11 ++++++++++-
 1 file changed, 10 insertions(+), 1 deletion(-)

diff --git a/tools/vm/slabinfo.c b/tools/vm/slabinfo.c
index b9d34b3..9673190 100644
--- a/tools/vm/slabinfo.c
+++ b/tools/vm/slabinfo.c
@@ -83,6 +83,7 @@ struct aliasinfo {
 int sort_loss;
 int extended_totals;
 int show_bytes;
+int unreclaim_only;
 
 /* Debug options */
 int sanity;
@@ -132,6 +133,7 @@ static void usage(void)
 		"-L|--Loss              Sort by loss\n"
 		"-X|--Xtotals           Show extended summary information\n"
 		"-B|--Bytes             Show size in bytes\n"
+		"-U|--unreclaim		Show unreclaimable slabs only\n"
 		"\nValid debug options (FZPUT may be combined)\n"
 		"a / A          Switch on all debug options (=FZUP)\n"
 		"-              Switch off all debug options\n"
@@ -568,6 +570,9 @@ static void slabcache(struct slabinfo *s)
 	if (strcmp(s->name, "*") == 0)
 		return;
 
+	if (unreclaim_only && s->reclaim_account)
+		return;
+		
 	if (actual_slabs == 1) {
 		report(s);
 		return;
@@ -1346,6 +1351,7 @@ struct option opts[] = {
 	{ "Loss", no_argument, NULL, 'L'},
 	{ "Xtotals", no_argument, NULL, 'X'},
 	{ "Bytes", no_argument, NULL, 'B'},
+	{ "unreclaim", no_argument, NULL, 'U'},
 	{ NULL, 0, NULL, 0 }
 };
 
@@ -1357,7 +1363,7 @@ int main(int argc, char *argv[])
 
 	page_size = getpagesize();
 
-	while ((c = getopt_long(argc, argv, "aAd::Defhil1noprstvzTSN:LXB",
+	while ((c = getopt_long(argc, argv, "aAd::Defhil1noprstvzTSN:LXBU",
 						opts, NULL)) != -1)
 		switch (c) {
 		case '1':
@@ -1438,6 +1444,9 @@ int main(int argc, char *argv[])
 		case 'B':
 			show_bytes = 1;
 			break;
+		case 'U':
+			unreclaim_only = 1;
+			break;
 		default:
 			fatal("%s: Invalid option '%c'\n", argv[0], optopt);
 
-- 
1.8.3.1

[PATCH 1/2] tools: slabinfo: add "-U" option to show unreclaimable slabs only

[Yang Shi]

Add "-U" option to show unreclaimable slabs only.

"-U" and "-S" together can tell us what unreclaimable slabs use the most
memory to help debug huge unreclaimable slabs issue.

Signed-off-by: Yang Shi <yang.s@alibaba-inc.com>
Acked-by: Christoph Lameter <cl@linux.com>
---
 tools/vm/slabinfo.c | 11 ++++++++++-
 1 file changed, 10 insertions(+), 1 deletion(-)

diff --git a/tools/vm/slabinfo.c b/tools/vm/slabinfo.c
index b9d34b3..9673190 100644
--- a/tools/vm/slabinfo.c
+++ b/tools/vm/slabinfo.c
@@ -83,6 +83,7 @@ struct aliasinfo {
 int sort_loss;
 int extended_totals;
 int show_bytes;
+int unreclaim_only;
 
 /* Debug options */
 int sanity;
@@ -132,6 +133,7 @@ static void usage(void)
 		"-L|--Loss              Sort by loss\n"
 		"-X|--Xtotals           Show extended summary information\n"
 		"-B|--Bytes             Show size in bytes\n"
+		"-U|--unreclaim		Show unreclaimable slabs only\n"
 		"\nValid debug options (FZPUT may be combined)\n"
 		"a / A          Switch on all debug options (=FZUP)\n"
 		"-              Switch off all debug options\n"
@@ -568,6 +570,9 @@ static void slabcache(struct slabinfo *s)
 	if (strcmp(s->name, "*") == 0)
 		return;
 
+	if (unreclaim_only && s->reclaim_account)
+		return;
+		
 	if (actual_slabs == 1) {
 		report(s);
 		return;
@@ -1346,6 +1351,7 @@ struct option opts[] = {
 	{ "Loss", no_argument, NULL, 'L'},
 	{ "Xtotals", no_argument, NULL, 'X'},
 	{ "Bytes", no_argument, NULL, 'B'},
+	{ "unreclaim", no_argument, NULL, 'U'},
 	{ NULL, 0, NULL, 0 }
 };
 
@@ -1357,7 +1363,7 @@ int main(int argc, char *argv[])
 
 	page_size = getpagesize();
 
-	while ((c = getopt_long(argc, argv, "aAd::Defhil1noprstvzTSN:LXB",
+	while ((c = getopt_long(argc, argv, "aAd::Defhil1noprstvzTSN:LXBU",
 						opts, NULL)) != -1)
 		switch (c) {
 		case '1':
@@ -1438,6 +1444,9 @@ int main(int argc, char *argv[])
 		case 'B':
 			show_bytes = 1;
 			break;
+		case 'U':
+			unreclaim_only = 1;
+			break;
 		default:
 			fatal("%s: Invalid option '%c'\n", argv[0], optopt);
 
-- 
1.8.3.1

--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org.  For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>

Re: [PATCH 1/2] tools: slabinfo: add "-U" option to show unreclaimable slabs only

[David Rientjes]

On Thu, 21 Sep 2017, Yang Shi wrote:

> diff --git a/tools/vm/slabinfo.c b/tools/vm/slabinfo.c
> index b9d34b3..9673190 100644
> --- a/tools/vm/slabinfo.c
> +++ b/tools/vm/slabinfo.c
> @@ -83,6 +83,7 @@ struct aliasinfo {
>  int sort_loss;
>  int extended_totals;
>  int show_bytes;
> +int unreclaim_only;
>  
>  /* Debug options */
>  int sanity;
> @@ -132,6 +133,7 @@ static void usage(void)
>  		"-L|--Loss              Sort by loss\n"
>  		"-X|--Xtotals           Show extended summary information\n"
>  		"-B|--Bytes             Show size in bytes\n"
> +		"-U|--unreclaim		Show unreclaimable slabs only\n"
>  		"\nValid debug options (FZPUT may be combined)\n"
>  		"a / A          Switch on all debug options (=FZUP)\n"
>  		"-              Switch off all debug options\n"

I suppose this should be s/unreclaim/Unreclaim/

> @@ -568,6 +570,9 @@ static void slabcache(struct slabinfo *s)
>  	if (strcmp(s->name, "*") == 0)
>  		return;
>  
> +	if (unreclaim_only && s->reclaim_account)
> +		return;
> +		
>  	if (actual_slabs == 1) {
>  		report(s);
>  		return;
> @@ -1346,6 +1351,7 @@ struct option opts[] = {
>  	{ "Loss", no_argument, NULL, 'L'},
>  	{ "Xtotals", no_argument, NULL, 'X'},
>  	{ "Bytes", no_argument, NULL, 'B'},
> +	{ "unreclaim", no_argument, NULL, 'U'},
>  	{ NULL, 0, NULL, 0 }
>  };
>  

Same.

After that:

Acked-by: David Rientjes <rientjes@google.com>

Also, you may find it better to remove the "RFC" tag from the patchset's 
header email since it's agreed that we want this.

Re: [PATCH 1/2] tools: slabinfo: add "-U" option to show unreclaimable slabs only

[David Rientjes]

On Thu, 21 Sep 2017, Yang Shi wrote:

> diff --git a/tools/vm/slabinfo.c b/tools/vm/slabinfo.c
> index b9d34b3..9673190 100644
> --- a/tools/vm/slabinfo.c
> +++ b/tools/vm/slabinfo.c
> @@ -83,6 +83,7 @@ struct aliasinfo {
>  int sort_loss;
>  int extended_totals;
>  int show_bytes;
> +int unreclaim_only;
>  
>  /* Debug options */
>  int sanity;
> @@ -132,6 +133,7 @@ static void usage(void)
>  		"-L|--Loss              Sort by loss\n"
>  		"-X|--Xtotals           Show extended summary information\n"
>  		"-B|--Bytes             Show size in bytes\n"
> +		"-U|--unreclaim		Show unreclaimable slabs only\n"
>  		"\nValid debug options (FZPUT may be combined)\n"
>  		"a / A          Switch on all debug options (=FZUP)\n"
>  		"-              Switch off all debug options\n"

I suppose this should be s/unreclaim/Unreclaim/

> @@ -568,6 +570,9 @@ static void slabcache(struct slabinfo *s)
>  	if (strcmp(s->name, "*") == 0)
>  		return;
>  
> +	if (unreclaim_only && s->reclaim_account)
> +		return;
> +		
>  	if (actual_slabs == 1) {
>  		report(s);
>  		return;
> @@ -1346,6 +1351,7 @@ struct option opts[] = {
>  	{ "Loss", no_argument, NULL, 'L'},
>  	{ "Xtotals", no_argument, NULL, 'X'},
>  	{ "Bytes", no_argument, NULL, 'B'},
> +	{ "unreclaim", no_argument, NULL, 'U'},
>  	{ NULL, 0, NULL, 0 }
>  };
>  

Same.

After that:

Acked-by: David Rientjes <rientjes@google.com>

Also, you may find it better to remove the "RFC" tag from the patchset's 
header email since it's agreed that we want this.

--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org.  For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>

Re: [PATCH 1/2] tools: slabinfo: add "-U" option to show unreclaimable slabs only

[Yang Shi]

On 9/20/17 1:45 PM, David Rientjes wrote:
> On Thu, 21 Sep 2017, Yang Shi wrote:
> 
>> diff --git a/tools/vm/slabinfo.c b/tools/vm/slabinfo.c
>> index b9d34b3..9673190 100644
>> --- a/tools/vm/slabinfo.c
>> +++ b/tools/vm/slabinfo.c
>> @@ -83,6 +83,7 @@ struct aliasinfo {
>>   int sort_loss;
>>   int extended_totals;
>>   int show_bytes;
>> +int unreclaim_only;
>>   
>>   /* Debug options */
>>   int sanity;
>> @@ -132,6 +133,7 @@ static void usage(void)
>>   		"-L|--Loss              Sort by loss\n"
>>   		"-X|--Xtotals           Show extended summary information\n"
>>   		"-B|--Bytes             Show size in bytes\n"
>> +		"-U|--unreclaim		Show unreclaimable slabs only\n"
>>   		"\nValid debug options (FZPUT may be combined)\n"
>>   		"a / A          Switch on all debug options (=FZUP)\n"
>>   		"-              Switch off all debug options\n"
> 
> I suppose this should be s/unreclaim/Unreclaim/
> 
>> @@ -568,6 +570,9 @@ static void slabcache(struct slabinfo *s)
>>   	if (strcmp(s->name, "*") == 0)
>>   		return;
>>   
>> +	if (unreclaim_only && s->reclaim_account)
>> +		return;
>> +		
>>   	if (actual_slabs == 1) {
>>   		report(s);
>>   		return;
>> @@ -1346,6 +1351,7 @@ struct option opts[] = {
>>   	{ "Loss", no_argument, NULL, 'L'},
>>   	{ "Xtotals", no_argument, NULL, 'X'},
>>   	{ "Bytes", no_argument, NULL, 'B'},
>> +	{ "unreclaim", no_argument, NULL, 'U'},
>>   	{ NULL, 0, NULL, 0 }
>>   };
>>   
> 
> Same.
> 
> After that:
> 
> Acked-by: David Rientjes <rientjes@google.com>
> 
> Also, you may find it better to remove the "RFC" tag from the patchset's
> header email since it's agreed that we want this.

Thanks, will get fixed in v4.

Yang

> 

Re: [PATCH 1/2] tools: slabinfo: add "-U" option to show unreclaimable slabs only

[Yang Shi]

On 9/20/17 1:45 PM, David Rientjes wrote:
> On Thu, 21 Sep 2017, Yang Shi wrote:
> 
>> diff --git a/tools/vm/slabinfo.c b/tools/vm/slabinfo.c
>> index b9d34b3..9673190 100644
>> --- a/tools/vm/slabinfo.c
>> +++ b/tools/vm/slabinfo.c
>> @@ -83,6 +83,7 @@ struct aliasinfo {
>>   int sort_loss;
>>   int extended_totals;
>>   int show_bytes;
>> +int unreclaim_only;
>>   
>>   /* Debug options */
>>   int sanity;
>> @@ -132,6 +133,7 @@ static void usage(void)
>>   		"-L|--Loss              Sort by loss\n"
>>   		"-X|--Xtotals           Show extended summary information\n"
>>   		"-B|--Bytes             Show size in bytes\n"
>> +		"-U|--unreclaim		Show unreclaimable slabs only\n"
>>   		"\nValid debug options (FZPUT may be combined)\n"
>>   		"a / A          Switch on all debug options (=FZUP)\n"
>>   		"-              Switch off all debug options\n"
> 
> I suppose this should be s/unreclaim/Unreclaim/
> 
>> @@ -568,6 +570,9 @@ static void slabcache(struct slabinfo *s)
>>   	if (strcmp(s->name, "*") == 0)
>>   		return;
>>   
>> +	if (unreclaim_only && s->reclaim_account)
>> +		return;
>> +		
>>   	if (actual_slabs == 1) {
>>   		report(s);
>>   		return;
>> @@ -1346,6 +1351,7 @@ struct option opts[] = {
>>   	{ "Loss", no_argument, NULL, 'L'},
>>   	{ "Xtotals", no_argument, NULL, 'X'},
>>   	{ "Bytes", no_argument, NULL, 'B'},
>> +	{ "unreclaim", no_argument, NULL, 'U'},
>>   	{ NULL, 0, NULL, 0 }
>>   };
>>   
> 
> Same.
> 
> After that:
> 
> Acked-by: David Rientjes <rientjes@google.com>
> 
> Also, you may find it better to remove the "RFC" tag from the patchset's
> header email since it's agreed that we want this.

Thanks, will get fixed in v4.

Yang

> 

--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org.  For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>

[RFC v2] oom: capture unreclaimable slab info in oom message when kernel panic

[Yang Shi]

Sorry, forgot send the cover letter with change log. Resent the patch series.

Recently we ran into a oom issue, kernel panic due to no killable process.
The dmesg shows huge unreclaimable slabs used almost 100% memory, but kdump doesn't capture vmcore due to some reason.

So, it may sound better to capture unreclaimable slab info in oom message when kernel panic to aid trouble shooting and cover the corner case.
Since kernel already panic, so capturing more information sounds worthy and doesn't bother normal oom killer.

With the patchset, tools/vm/slabinfo has a new option, "-U", to show unreclaimable slab only.

And, oom will print all non zero (num_objs * size != 0) unreclaimable slabs in oom killer message.

For details, please see the commit log for each commit.

Changelog v1 —> v2:
* Removed the original patch 1 (“mm: slab: output reclaimable flag in /proc/slabinfo”) since Christopher suggested it might break the compatibility and /proc/slabinfo is legacy
* Added Christopher’s Acked-by
* Removed acquiring slab_mutex per Tetsuo’s comment


Yang Shi (2):
      tools: slabinfo: add "-U" option to show unreclaimable slabs only
      mm: oom: show unreclaimable slab info when kernel panic

 mm/oom_kill.c       | 13 +++++++++++--
 mm/slab.c           |  1 +
 mm/slab.h           |  7 +++++++
 mm/slab_common.c    | 30 ++++++++++++++++++++++++++++++
 mm/slub.c           |  1 +
 tools/vm/slabinfo.c | 11 ++++++++++-
 6 files changed, 60 insertions(+), 3 deletions(-)

[PATCH 1/2] tools: slabinfo: add "-U" option to show unreclaimable slabs only

[Yang Shi]

Add "-U" option to show unreclaimable slabs only.

"-U" and "-S" together can tell us what unreclaimable slabs use the most
memory to help debug huge unreclaimable slabs issue.

Signed-off-by: Yang Shi <yang.s@alibaba-inc.com>
Acked-by: Christoph Lameter <cl@linux.com>
---
 tools/vm/slabinfo.c | 11 ++++++++++-
 1 file changed, 10 insertions(+), 1 deletion(-)

diff --git a/tools/vm/slabinfo.c b/tools/vm/slabinfo.c
index b9d34b3..9673190 100644
--- a/tools/vm/slabinfo.c
+++ b/tools/vm/slabinfo.c
@@ -83,6 +83,7 @@ struct aliasinfo {
 int sort_loss;
 int extended_totals;
 int show_bytes;
+int unreclaim_only;
 
 /* Debug options */
 int sanity;
@@ -132,6 +133,7 @@ static void usage(void)
 		"-L|--Loss              Sort by loss\n"
 		"-X|--Xtotals           Show extended summary information\n"
 		"-B|--Bytes             Show size in bytes\n"
+		"-U|--unreclaim		Show unreclaimable slabs only\n"
 		"\nValid debug options (FZPUT may be combined)\n"
 		"a / A          Switch on all debug options (=FZUP)\n"
 		"-              Switch off all debug options\n"
@@ -568,6 +570,9 @@ static void slabcache(struct slabinfo *s)
 	if (strcmp(s->name, "*") == 0)
 		return;
 
+	if (unreclaim_only && s->reclaim_account)
+		return;
+		
 	if (actual_slabs == 1) {
 		report(s);
 		return;
@@ -1346,6 +1351,7 @@ struct option opts[] = {
 	{ "Loss", no_argument, NULL, 'L'},
 	{ "Xtotals", no_argument, NULL, 'X'},
 	{ "Bytes", no_argument, NULL, 'B'},
+	{ "unreclaim", no_argument, NULL, 'U'},
 	{ NULL, 0, NULL, 0 }
 };
 
@@ -1357,7 +1363,7 @@ int main(int argc, char *argv[])
 
 	page_size = getpagesize();
 
-	while ((c = getopt_long(argc, argv, "aAd::Defhil1noprstvzTSN:LXB",
+	while ((c = getopt_long(argc, argv, "aAd::Defhil1noprstvzTSN:LXBU",
 						opts, NULL)) != -1)
 		switch (c) {
 		case '1':
@@ -1438,6 +1444,9 @@ int main(int argc, char *argv[])
 		case 'B':
 			show_bytes = 1;
 			break;
+		case 'U':
+			unreclaim_only = 1;
+			break;
 		default:
 			fatal("%s: Invalid option '%c'\n", argv[0], optopt);
 
-- 
1.8.3.1

[PATCH 1/2] tools: slabinfo: add "-U" option to show unreclaimable slabs only

[Yang Shi]

Add "-U" option to show unreclaimable slabs only.

"-U" and "-S" together can tell us what unreclaimable slabs use the most
memory to help debug huge unreclaimable slabs issue.

Signed-off-by: Yang Shi <yang.s@alibaba-inc.com>
Acked-by: Christoph Lameter <cl@linux.com>
---
 tools/vm/slabinfo.c | 11 ++++++++++-
 1 file changed, 10 insertions(+), 1 deletion(-)

diff --git a/tools/vm/slabinfo.c b/tools/vm/slabinfo.c
index b9d34b3..9673190 100644
--- a/tools/vm/slabinfo.c
+++ b/tools/vm/slabinfo.c
@@ -83,6 +83,7 @@ struct aliasinfo {
 int sort_loss;
 int extended_totals;
 int show_bytes;
+int unreclaim_only;
 
 /* Debug options */
 int sanity;
@@ -132,6 +133,7 @@ static void usage(void)
 		"-L|--Loss              Sort by loss\n"
 		"-X|--Xtotals           Show extended summary information\n"
 		"-B|--Bytes             Show size in bytes\n"
+		"-U|--unreclaim		Show unreclaimable slabs only\n"
 		"\nValid debug options (FZPUT may be combined)\n"
 		"a / A          Switch on all debug options (=FZUP)\n"
 		"-              Switch off all debug options\n"
@@ -568,6 +570,9 @@ static void slabcache(struct slabinfo *s)
 	if (strcmp(s->name, "*") == 0)
 		return;
 
+	if (unreclaim_only && s->reclaim_account)
+		return;
+		
 	if (actual_slabs == 1) {
 		report(s);
 		return;
@@ -1346,6 +1351,7 @@ struct option opts[] = {
 	{ "Loss", no_argument, NULL, 'L'},
 	{ "Xtotals", no_argument, NULL, 'X'},
 	{ "Bytes", no_argument, NULL, 'B'},
+	{ "unreclaim", no_argument, NULL, 'U'},
 	{ NULL, 0, NULL, 0 }
 };
 
@@ -1357,7 +1363,7 @@ int main(int argc, char *argv[])
 
 	page_size = getpagesize();
 
-	while ((c = getopt_long(argc, argv, "aAd::Defhil1noprstvzTSN:LXB",
+	while ((c = getopt_long(argc, argv, "aAd::Defhil1noprstvzTSN:LXBU",
 						opts, NULL)) != -1)
 		switch (c) {
 		case '1':
@@ -1438,6 +1444,9 @@ int main(int argc, char *argv[])
 		case 'B':
 			show_bytes = 1;
 			break;
+		case 'U':
+			unreclaim_only = 1;
+			break;
 		default:
 			fatal("%s: Invalid option '%c'\n", argv[0], optopt);
 
-- 
1.8.3.1

--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org.  For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>

[PATCH 1/2] tools: slabinfo: add "-U" option to show unreclaimable slabs only

[Yang Shi]

Add "-U" option to show unreclaimable slabs only.

"-U" and "-S" together can tell us what unreclaimable slabs use the most
memory to help debug huge unreclaimable slabs issue.

Signed-off-by: Yang Shi <yang.s@alibaba-inc.com>
Acked-by: Christoph Lameter <cl@linux.com>
---
 tools/vm/slabinfo.c | 11 ++++++++++-
 1 file changed, 10 insertions(+), 1 deletion(-)

diff --git a/tools/vm/slabinfo.c b/tools/vm/slabinfo.c
index b9d34b3..9673190 100644
--- a/tools/vm/slabinfo.c
+++ b/tools/vm/slabinfo.c
@@ -83,6 +83,7 @@ struct aliasinfo {
 int sort_loss;
 int extended_totals;
 int show_bytes;
+int unreclaim_only;
 
 /* Debug options */
 int sanity;
@@ -132,6 +133,7 @@ static void usage(void)
 		"-L|--Loss              Sort by loss\n"
 		"-X|--Xtotals           Show extended summary information\n"
 		"-B|--Bytes             Show size in bytes\n"
+		"-U|--unreclaim		Show unreclaimable slabs only\n"
 		"\nValid debug options (FZPUT may be combined)\n"
 		"a / A          Switch on all debug options (=FZUP)\n"
 		"-              Switch off all debug options\n"
@@ -568,6 +570,9 @@ static void slabcache(struct slabinfo *s)
 	if (strcmp(s->name, "*") == 0)
 		return;
 
+	if (unreclaim_only && s->reclaim_account)
+		return;
+		
 	if (actual_slabs == 1) {
 		report(s);
 		return;
@@ -1346,6 +1351,7 @@ struct option opts[] = {
 	{ "Loss", no_argument, NULL, 'L'},
 	{ "Xtotals", no_argument, NULL, 'X'},
 	{ "Bytes", no_argument, NULL, 'B'},
+	{ "unreclaim", no_argument, NULL, 'U'},
 	{ NULL, 0, NULL, 0 }
 };
 
@@ -1357,7 +1363,7 @@ int main(int argc, char *argv[])
 
 	page_size = getpagesize();
 
-	while ((c = getopt_long(argc, argv, "aAd::Defhil1noprstvzTSN:LXB",
+	while ((c = getopt_long(argc, argv, "aAd::Defhil1noprstvzTSN:LXBU",
 						opts, NULL)) != -1)
 		switch (c) {
 		case '1':
@@ -1438,6 +1444,9 @@ int main(int argc, char *argv[])
 		case 'B':
 			show_bytes = 1;
 			break;
+		case 'U':
+			unreclaim_only = 1;
+			break;
 		default:
 			fatal("%s: Invalid option '%c'\n", argv[0], optopt);
 
-- 
1.8.3.1

[PATCH 1/2] tools: slabinfo: add "-U" option to show unreclaimable slabs only

[Yang Shi]

Add "-U" option to show unreclaimable slabs only.

"-U" and "-S" together can tell us what unreclaimable slabs use the most
memory to help debug huge unreclaimable slabs issue.

Signed-off-by: Yang Shi <yang.s@alibaba-inc.com>
Acked-by: Christoph Lameter <cl@linux.com>
---
 tools/vm/slabinfo.c | 11 ++++++++++-
 1 file changed, 10 insertions(+), 1 deletion(-)

diff --git a/tools/vm/slabinfo.c b/tools/vm/slabinfo.c
index b9d34b3..9673190 100644
--- a/tools/vm/slabinfo.c
+++ b/tools/vm/slabinfo.c
@@ -83,6 +83,7 @@ struct aliasinfo {
 int sort_loss;
 int extended_totals;
 int show_bytes;
+int unreclaim_only;
 
 /* Debug options */
 int sanity;
@@ -132,6 +133,7 @@ static void usage(void)
 		"-L|--Loss              Sort by loss\n"
 		"-X|--Xtotals           Show extended summary information\n"
 		"-B|--Bytes             Show size in bytes\n"
+		"-U|--unreclaim		Show unreclaimable slabs only\n"
 		"\nValid debug options (FZPUT may be combined)\n"
 		"a / A          Switch on all debug options (=FZUP)\n"
 		"-              Switch off all debug options\n"
@@ -568,6 +570,9 @@ static void slabcache(struct slabinfo *s)
 	if (strcmp(s->name, "*") == 0)
 		return;
 
+	if (unreclaim_only && s->reclaim_account)
+		return;
+		
 	if (actual_slabs == 1) {
 		report(s);
 		return;
@@ -1346,6 +1351,7 @@ struct option opts[] = {
 	{ "Loss", no_argument, NULL, 'L'},
 	{ "Xtotals", no_argument, NULL, 'X'},
 	{ "Bytes", no_argument, NULL, 'B'},
+	{ "unreclaim", no_argument, NULL, 'U'},
 	{ NULL, 0, NULL, 0 }
 };
 
@@ -1357,7 +1363,7 @@ int main(int argc, char *argv[])
 
 	page_size = getpagesize();
 
-	while ((c = getopt_long(argc, argv, "aAd::Defhil1noprstvzTSN:LXB",
+	while ((c = getopt_long(argc, argv, "aAd::Defhil1noprstvzTSN:LXBU",
 						opts, NULL)) != -1)
 		switch (c) {
 		case '1':
@@ -1438,6 +1444,9 @@ int main(int argc, char *argv[])
 		case 'B':
 			show_bytes = 1;
 			break;
+		case 'U':
+			unreclaim_only = 1;
+			break;
 		default:
 			fatal("%s: Invalid option '%c'\n", argv[0], optopt);
 
-- 
1.8.3.1

--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org.  For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>