* [U-Boot] [PATCH v3 01/21] part: move efi_guid_t
2017-09-13 22:05 [U-Boot] [PATCH v3 00/21] efi_loader: enough UEFI for standard distro boot Rob Clark
@ 2017-09-13 22:05 ` Rob Clark
2017-09-15 18:19 ` [U-Boot] [U-Boot,v3,01/21] " Heinrich Schuchardt
2017-09-21 7:04 ` Alexander Graf
2017-09-13 22:05 ` [U-Boot] [PATCH v3 02/21] part: extract MBR signature from partitions Rob Clark
` (20 subsequent siblings)
21 siblings, 2 replies; 72+ messages in thread
From: Rob Clark @ 2017-09-13 22:05 UTC (permalink / raw)
To: u-boot
Prep work for next patch.
Signed-off-by: Rob Clark <robdclark@gmail.com>
---
include/efi.h | 4 ++++
include/part.h | 3 ++-
include/part_efi.h | 4 ----
3 files changed, 6 insertions(+), 5 deletions(-)
diff --git a/include/efi.h b/include/efi.h
index 02b78b31b1..87b0b43f20 100644
--- a/include/efi.h
+++ b/include/efi.h
@@ -28,6 +28,10 @@
struct efi_device_path;
+typedef struct {
+ u8 b[16];
+} efi_guid_t;
+
#define EFI_BITS_PER_LONG BITS_PER_LONG
/*
diff --git a/include/part.h b/include/part.h
index 86117a7ce5..b2e820ef8a 100644
--- a/include/part.h
+++ b/include/part.h
@@ -280,8 +280,9 @@ struct part_driver {
#define U_BOOT_PART_TYPE(__name) \
ll_entry_declare(struct part_driver, __name, part_driver)
-#if CONFIG_IS_ENABLED(EFI_PARTITION)
#include <part_efi.h>
+
+#if CONFIG_IS_ENABLED(EFI_PARTITION)
/* disk/part_efi.c */
/**
* write_gpt_table() - Write the GUID Partition Table to disk
diff --git a/include/part_efi.h b/include/part_efi.h
index 317c044795..31e6bc6e14 100644
--- a/include/part_efi.h
+++ b/include/part_efi.h
@@ -58,10 +58,6 @@
/* linux/include/efi.h */
typedef u16 efi_char16_t;
-typedef struct {
- u8 b[16];
-} efi_guid_t;
-
/* based on linux/include/genhd.h */
struct partition {
u8 boot_ind; /* 0x80 - active */
--
2.13.5
^ permalink raw reply related [flat|nested] 72+ messages in thread* [U-Boot] [U-Boot,v3,01/21] part: move efi_guid_t
2017-09-13 22:05 ` [U-Boot] [PATCH v3 01/21] part: move efi_guid_t Rob Clark
@ 2017-09-15 18:19 ` Heinrich Schuchardt
2017-09-15 18:34 ` Heinrich Schuchardt
2017-09-21 7:04 ` Alexander Graf
1 sibling, 1 reply; 72+ messages in thread
From: Heinrich Schuchardt @ 2017-09-15 18:19 UTC (permalink / raw)
To: u-boot
On 09/14/2017 12:05 AM, Rob Clark wrote:
> Prep work for next patch.
>
> Signed-off-by: Rob Clark <robdclark@gmail.com>
> ---
> include/efi.h | 4 ++++
> include/part.h | 3 ++-
> include/part_efi.h | 4 ----
> 3 files changed, 6 insertions(+), 5 deletions(-)
>
> diff --git a/include/efi.h b/include/efi.h
> index 02b78b31b1..87b0b43f20 100644
> --- a/include/efi.h
> +++ b/include/efi.h
> @@ -28,6 +28,10 @@
>
> struct efi_device_path;
>
> +typedef struct {
> + u8 b[16];
> +} efi_guid_t;
> +
> #define EFI_BITS_PER_LONG BITS_PER_LONG
>
> /*
> diff --git a/include/part.h b/include/part.h
> index 86117a7ce5..b2e820ef8a 100644
> --- a/include/part.h
> +++ b/include/part.h
> @@ -280,8 +280,9 @@ struct part_driver {
> #define U_BOOT_PART_TYPE(__name) \
> ll_entry_declare(struct part_driver, __name, part_driver)
>
> -#if CONFIG_IS_ENABLED(EFI_PARTITION)
> #include <part_efi.h>
> +
> +#if CONFIG_IS_ENABLED(EFI_PARTITION)
> /* disk/part_efi.c */
> /**
> * write_gpt_table() - Write the GUID Partition Table to disk
> diff --git a/include/part_efi.h b/include/part_efi.h
> index 317c044795..31e6bc6e14 100644
> --- a/include/part_efi.h
> +++ b/include/part_efi.h
> @@ -58,10 +58,6 @@
> /* linux/include/efi.h */
> typedef u16 efi_char16_t;
>
> -typedef struct {
> - u8 b[16];
> -} efi_guid_t;
> -
> /* based on linux/include/genhd.h */
> struct partition {
> u8 boot_ind; /* 0x80 - active */
>
Compiled and tested with and without CONFIG_EFI_PARTITION.
Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
^ permalink raw reply [flat|nested] 72+ messages in thread* [U-Boot] [U-Boot,v3,01/21] part: move efi_guid_t
2017-09-15 18:19 ` [U-Boot] [U-Boot,v3,01/21] " Heinrich Schuchardt
@ 2017-09-15 18:34 ` Heinrich Schuchardt
0 siblings, 0 replies; 72+ messages in thread
From: Heinrich Schuchardt @ 2017-09-15 18:34 UTC (permalink / raw)
To: u-boot
Hello Alex,
I guess it makes most sense if you pick up this patch in your efi-next
branch as it touches include/efi.h and otherwise we would have to load
this onto Tom.
Best regards
Heinrich
On 09/15/2017 08:19 PM, Heinrich Schuchardt wrote:
> On 09/14/2017 12:05 AM, Rob Clark wrote:
>> Prep work for next patch.
>>
>> Signed-off-by: Rob Clark <robdclark@gmail.com>
>> ---
>> include/efi.h | 4 ++++
>> include/part.h | 3 ++-
>> include/part_efi.h | 4 ----
>> 3 files changed, 6 insertions(+), 5 deletions(-)
>>
>> diff --git a/include/efi.h b/include/efi.h
>> index 02b78b31b1..87b0b43f20 100644
>> --- a/include/efi.h
>> +++ b/include/efi.h
>> @@ -28,6 +28,10 @@
>>
>> struct efi_device_path;
>>
>> +typedef struct {
>> + u8 b[16];
>> +} efi_guid_t;
>> +
>> #define EFI_BITS_PER_LONG BITS_PER_LONG
>>
>> /*
>> diff --git a/include/part.h b/include/part.h
>> index 86117a7ce5..b2e820ef8a 100644
>> --- a/include/part.h
>> +++ b/include/part.h
>> @@ -280,8 +280,9 @@ struct part_driver {
>> #define U_BOOT_PART_TYPE(__name) \
>> ll_entry_declare(struct part_driver, __name, part_driver)
>>
>> -#if CONFIG_IS_ENABLED(EFI_PARTITION)
>> #include <part_efi.h>
>> +
>> +#if CONFIG_IS_ENABLED(EFI_PARTITION)
>> /* disk/part_efi.c */
>> /**
>> * write_gpt_table() - Write the GUID Partition Table to disk
>> diff --git a/include/part_efi.h b/include/part_efi.h
>> index 317c044795..31e6bc6e14 100644
>> --- a/include/part_efi.h
>> +++ b/include/part_efi.h
>> @@ -58,10 +58,6 @@
>> /* linux/include/efi.h */
>> typedef u16 efi_char16_t;
>>
>> -typedef struct {
>> - u8 b[16];
>> -} efi_guid_t;
>> -
>> /* based on linux/include/genhd.h */
>> struct partition {
>> u8 boot_ind; /* 0x80 - active */
>>
>
> Compiled and tested with and without CONFIG_EFI_PARTITION.
>
> Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
>
^ permalink raw reply [flat|nested] 72+ messages in thread
* [U-Boot] [U-Boot,v3,01/21] part: move efi_guid_t
2017-09-13 22:05 ` [U-Boot] [PATCH v3 01/21] part: move efi_guid_t Rob Clark
2017-09-15 18:19 ` [U-Boot] [U-Boot,v3,01/21] " Heinrich Schuchardt
@ 2017-09-21 7:04 ` Alexander Graf
1 sibling, 0 replies; 72+ messages in thread
From: Alexander Graf @ 2017-09-21 7:04 UTC (permalink / raw)
To: u-boot
> Prep work for next patch.
>
> Signed-off-by: Rob Clark <robdclark@gmail.com>
> Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Thanks, applied to efi-next
Alex
^ permalink raw reply [flat|nested] 72+ messages in thread
* [U-Boot] [PATCH v3 02/21] part: extract MBR signature from partitions
2017-09-13 22:05 [U-Boot] [PATCH v3 00/21] efi_loader: enough UEFI for standard distro boot Rob Clark
2017-09-13 22:05 ` [U-Boot] [PATCH v3 01/21] part: move efi_guid_t Rob Clark
@ 2017-09-13 22:05 ` Rob Clark
2017-09-21 7:05 ` [U-Boot] [U-Boot, v3, " Alexander Graf
2017-10-02 18:17 ` [U-Boot] [PATCH v3 " Fabio Estevam
2017-09-13 22:05 ` [U-Boot] [PATCH v3 03/21] efi: add some missing __packed Rob Clark
` (19 subsequent siblings)
21 siblings, 2 replies; 72+ messages in thread
From: Rob Clark @ 2017-09-13 22:05 UTC (permalink / raw)
To: u-boot
From: Peter Jones <pjones@redhat.com>
EFI client programs need the signature information from the partition
table to determine the disk a partition is on, so we need to fill that
in here.
Signed-off-by: Peter Jones <pjones@redhat.com>
[separated from efi_loader part, and fixed build-errors for non-
CONFIG_EFI_PARTITION case]
Signed-off-by: Rob Clark <robdclark@gmail.com>
---
disk/part_dos.c | 12 +++++++++---
disk/part_efi.c | 20 ++++++++++++++++++++
include/blk.h | 18 ++++++++++++++++++
3 files changed, 47 insertions(+), 3 deletions(-)
diff --git a/disk/part_dos.c b/disk/part_dos.c
index 7ede15ec26..850a538e83 100644
--- a/disk/part_dos.c
+++ b/disk/part_dos.c
@@ -89,14 +89,20 @@ static int test_block_type(unsigned char *buffer)
static int part_test_dos(struct blk_desc *dev_desc)
{
- ALLOC_CACHE_ALIGN_BUFFER(unsigned char, buffer, dev_desc->blksz);
+ ALLOC_CACHE_ALIGN_BUFFER(legacy_mbr, mbr, dev_desc->blksz);
- if (blk_dread(dev_desc, 0, 1, (ulong *)buffer) != 1)
+ if (blk_dread(dev_desc, 0, 1, (ulong *)mbr) != 1)
return -1;
- if (test_block_type(buffer) != DOS_MBR)
+ if (test_block_type((unsigned char *)mbr) != DOS_MBR)
return -1;
+ if (dev_desc->sig_type == SIG_TYPE_NONE &&
+ mbr->unique_mbr_signature != 0) {
+ dev_desc->sig_type = SIG_TYPE_MBR;
+ dev_desc->mbr_sig = mbr->unique_mbr_signature;
+ }
+
return 0;
}
diff --git a/disk/part_efi.c b/disk/part_efi.c
index 2973d52f6a..208bb14ee8 100644
--- a/disk/part_efi.c
+++ b/disk/part_efi.c
@@ -923,11 +923,19 @@ static int is_pmbr_valid(legacy_mbr * mbr)
static int is_gpt_valid(struct blk_desc *dev_desc, u64 lba,
gpt_header *pgpt_head, gpt_entry **pgpt_pte)
{
+ ALLOC_CACHE_ALIGN_BUFFER(legacy_mbr, mbr, dev_desc->blksz);
+
if (!dev_desc || !pgpt_head) {
printf("%s: Invalid Argument(s)\n", __func__);
return 0;
}
+ /* Read MBR Header from device */
+ if (blk_dread(dev_desc, 0, 1, (ulong *)mbr) != 1) {
+ printf("*** ERROR: Can't read MBR header ***\n");
+ return 0;
+ }
+
/* Read GPT Header from device */
if (blk_dread(dev_desc, (lbaint_t)lba, 1, pgpt_head) != 1) {
printf("*** ERROR: Can't read GPT header ***\n");
@@ -937,6 +945,18 @@ static int is_gpt_valid(struct blk_desc *dev_desc, u64 lba,
if (validate_gpt_header(pgpt_head, (lbaint_t)lba, dev_desc->lba))
return 0;
+ if (dev_desc->sig_type == SIG_TYPE_NONE) {
+ efi_guid_t empty = {};
+ if (memcmp(&pgpt_head->disk_guid, &empty, sizeof(empty))) {
+ dev_desc->sig_type = SIG_TYPE_GUID;
+ memcpy(&dev_desc->guid_sig, &pgpt_head->disk_guid,
+ sizeof(empty));
+ } else if (mbr->unique_mbr_signature != 0) {
+ dev_desc->sig_type = SIG_TYPE_MBR;
+ dev_desc->mbr_sig = mbr->unique_mbr_signature;
+ }
+ }
+
/* Read and allocate Partition Table Entries */
*pgpt_pte = alloc_read_gpt_entries(dev_desc, pgpt_head);
if (*pgpt_pte == NULL) {
diff --git a/include/blk.h b/include/blk.h
index 1965812a9d..41b4d7efa8 100644
--- a/include/blk.h
+++ b/include/blk.h
@@ -8,6 +8,8 @@
#ifndef BLK_H
#define BLK_H
+#include <efi.h>
+
#ifdef CONFIG_SYS_64BIT_LBA
typedef uint64_t lbaint_t;
#define LBAFlength "ll"
@@ -41,6 +43,17 @@ enum if_type {
#define BLK_REV_SIZE 8
/*
+ * Identifies the partition table type (ie. MBR vs GPT GUID) signature
+ */
+enum sig_type {
+ SIG_TYPE_NONE,
+ SIG_TYPE_MBR,
+ SIG_TYPE_GUID,
+
+ SIG_TYPE_COUNT /* Number of signature types */
+};
+
+/*
* With driver model (CONFIG_BLK) this is uclass platform data, accessible
* with dev_get_uclass_platdata(dev)
*/
@@ -67,6 +80,11 @@ struct blk_desc {
char vendor[BLK_VEN_SIZE + 1]; /* device vendor string */
char product[BLK_PRD_SIZE + 1]; /* device product number */
char revision[BLK_REV_SIZE + 1]; /* firmware revision */
+ enum sig_type sig_type; /* Partition table signature type */
+ union {
+ uint32_t mbr_sig; /* MBR integer signature */
+ efi_guid_t guid_sig; /* GPT GUID Signature */
+ };
#if CONFIG_IS_ENABLED(BLK)
/*
* For now we have a few functions which take struct blk_desc as a
--
2.13.5
^ permalink raw reply related [flat|nested] 72+ messages in thread* [U-Boot] [U-Boot, v3, 02/21] part: extract MBR signature from partitions
2017-09-13 22:05 ` [U-Boot] [PATCH v3 02/21] part: extract MBR signature from partitions Rob Clark
@ 2017-09-21 7:05 ` Alexander Graf
2017-10-02 18:17 ` [U-Boot] [PATCH v3 " Fabio Estevam
1 sibling, 0 replies; 72+ messages in thread
From: Alexander Graf @ 2017-09-21 7:05 UTC (permalink / raw)
To: u-boot
> From: Peter Jones <pjones@redhat.com>
>
> EFI client programs need the signature information from the partition
> table to determine the disk a partition is on, so we need to fill that
> in here.
>
> Signed-off-by: Peter Jones <pjones@redhat.com>
> [separated from efi_loader part, and fixed build-errors for non-
> CONFIG_EFI_PARTITION case]
> Signed-off-by: Rob Clark <robdclark@gmail.com>
Thanks, applied to efi-next
Alex
^ permalink raw reply [flat|nested] 72+ messages in thread
* [U-Boot] [PATCH v3 02/21] part: extract MBR signature from partitions
2017-09-13 22:05 ` [U-Boot] [PATCH v3 02/21] part: extract MBR signature from partitions Rob Clark
2017-09-21 7:05 ` [U-Boot] [U-Boot, v3, " Alexander Graf
@ 2017-10-02 18:17 ` Fabio Estevam
2017-10-02 18:49 ` Peter Robinson
2017-10-02 19:35 ` Rob Clark
1 sibling, 2 replies; 72+ messages in thread
From: Fabio Estevam @ 2017-10-02 18:17 UTC (permalink / raw)
To: u-boot
On Wed, Sep 13, 2017 at 7:05 PM, Rob Clark <robdclark@gmail.com> wrote:
> From: Peter Jones <pjones@redhat.com>
>
> EFI client programs need the signature information from the partition
> table to determine the disk a partition is on, so we need to fill that
> in here.
>
> Signed-off-by: Peter Jones <pjones@redhat.com>
> [separated from efi_loader part, and fixed build-errors for non-
> CONFIG_EFI_PARTITION case]
> Signed-off-by: Rob Clark <robdclark@gmail.com>
This is commit ff98cb90514d9b78 in mainline now and breaks all mx6 SPL boots:
U-Boot SPL 2017.09-00221-g0d6ab32 (Oct 02 2017 - 15:13:19)
Trying to boot from MMC1
(hangs here)
Does anyone know how to fix this problem?
^ permalink raw reply [flat|nested] 72+ messages in thread
* [U-Boot] [PATCH v3 02/21] part: extract MBR signature from partitions
2017-10-02 18:17 ` [U-Boot] [PATCH v3 " Fabio Estevam
@ 2017-10-02 18:49 ` Peter Robinson
2017-10-02 19:02 ` Fabio Estevam
2017-10-02 19:35 ` Rob Clark
1 sibling, 1 reply; 72+ messages in thread
From: Peter Robinson @ 2017-10-02 18:49 UTC (permalink / raw)
To: u-boot
On Mon, Oct 2, 2017 at 7:17 PM, Fabio Estevam <festevam@gmail.com> wrote:
> On Wed, Sep 13, 2017 at 7:05 PM, Rob Clark <robdclark@gmail.com> wrote:
>> From: Peter Jones <pjones@redhat.com>
>>
>> EFI client programs need the signature information from the partition
>> table to determine the disk a partition is on, so we need to fill that
>> in here.
>>
>> Signed-off-by: Peter Jones <pjones@redhat.com>
>> [separated from efi_loader part, and fixed build-errors for non-
>> CONFIG_EFI_PARTITION case]
>> Signed-off-by: Rob Clark <robdclark@gmail.com>
>
> This is commit ff98cb90514d9b78 in mainline now and breaks all mx6 SPL boots:
>
> U-Boot SPL 2017.09-00221-g0d6ab32 (Oct 02 2017 - 15:13:19)
> Trying to boot from MMC1
> (hangs here)
>
> Does anyone know how to fix this problem?
That would explain what I'm seeing as we pull this patch set in to
2017.09 for EFI boot support on aarch64 platforms.
Peter
^ permalink raw reply [flat|nested] 72+ messages in thread
* [U-Boot] [PATCH v3 02/21] part: extract MBR signature from partitions
2017-10-02 18:49 ` Peter Robinson
@ 2017-10-02 19:02 ` Fabio Estevam
2017-10-02 19:32 ` Tom Rini
0 siblings, 1 reply; 72+ messages in thread
From: Fabio Estevam @ 2017-10-02 19:02 UTC (permalink / raw)
To: u-boot
On Mon, Oct 2, 2017 at 3:49 PM, Peter Robinson <pbrobinson@gmail.com> wrote:
> That would explain what I'm seeing as we pull this patch set in to
> 2017.09 for EFI boot support on aarch64 platforms.
Locally I am applying the following hack, so that I can continue to
work on mx6 with SPL:
https://pastebin.com/MX8tK76X
^ permalink raw reply [flat|nested] 72+ messages in thread
* [U-Boot] [PATCH v3 02/21] part: extract MBR signature from partitions
2017-10-02 19:02 ` Fabio Estevam
@ 2017-10-02 19:32 ` Tom Rini
2017-10-03 0:30 ` Fabio Estevam
0 siblings, 1 reply; 72+ messages in thread
From: Tom Rini @ 2017-10-02 19:32 UTC (permalink / raw)
To: u-boot
On Mon, Oct 02, 2017 at 04:02:37PM -0300, Fabio Estevam wrote:
> On Mon, Oct 2, 2017 at 3:49 PM, Peter Robinson <pbrobinson@gmail.com> wrote:
>
> > That would explain what I'm seeing as we pull this patch set in to
> > 2017.09 for EFI boot support on aarch64 platforms.
>
> Locally I am applying the following hack, so that I can continue to
> work on mx6 with SPL:
> https://pastebin.com/MX8tK76X
FWIW, on cubox the current status is looping, and your kludge I just get
no output :( But there may be some other problems here too as I'm
seeing some oddities as I try out SDP on it.
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: not available
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20171002/12ce5dd7/attachment.sig>
^ permalink raw reply [flat|nested] 72+ messages in thread
* [U-Boot] [PATCH v3 02/21] part: extract MBR signature from partitions
2017-10-02 19:32 ` Tom Rini
@ 2017-10-03 0:30 ` Fabio Estevam
0 siblings, 0 replies; 72+ messages in thread
From: Fabio Estevam @ 2017-10-03 0:30 UTC (permalink / raw)
To: u-boot
Hi Tom,
On Mon, Oct 2, 2017 at 4:32 PM, Tom Rini <trini@konsulko.com> wrote:
> FWIW, on cubox the current status is looping, and your kludge I just get
> no output :( But there may be some other problems here too as I'm
Just tried it on 2017.11-rc1 plus the attached hack and it boots fine:
U-Boot SPL 2017.11-rc1-dirty (Oct 02 2017 - 21:27:10)
Trying to boot from MMC1
U-Boot 2017.11-rc1-dirty (Oct 02 2017 - 21:27:10 -0300)
CPU: Freescale i.MX6Q rev1.5 996 MHz (running at 792 MHz)
CPU: Extended Commercial temperature grade (-20C to 105C) at 26C
Reset cause: POR
Board: MX6 Cubox-i
DRAM: 2 GiB
MMC: FSL_SDHC: 0
No panel detected: default to HDMI
Display: HDMI (1024x768)
In: serial
Out: serial
Err: serial
Net: FEC
Hit any key to stop autoboot: 0
=>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: 0001-workaround.patch
Type: text/x-patch
Size: 966 bytes
Desc: not available
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20171002/7bd3f52d/attachment.bin>
^ permalink raw reply [flat|nested] 72+ messages in thread
* [U-Boot] [PATCH v3 02/21] part: extract MBR signature from partitions
2017-10-02 18:17 ` [U-Boot] [PATCH v3 " Fabio Estevam
2017-10-02 18:49 ` Peter Robinson
@ 2017-10-02 19:35 ` Rob Clark
2017-10-03 1:52 ` Fabio Estevam
1 sibling, 1 reply; 72+ messages in thread
From: Rob Clark @ 2017-10-02 19:35 UTC (permalink / raw)
To: u-boot
On Mon, Oct 2, 2017 at 2:17 PM, Fabio Estevam <festevam@gmail.com> wrote:
> On Wed, Sep 13, 2017 at 7:05 PM, Rob Clark <robdclark@gmail.com> wrote:
>> From: Peter Jones <pjones@redhat.com>
>>
>> EFI client programs need the signature information from the partition
>> table to determine the disk a partition is on, so we need to fill that
>> in here.
>>
>> Signed-off-by: Peter Jones <pjones@redhat.com>
>> [separated from efi_loader part, and fixed build-errors for non-
>> CONFIG_EFI_PARTITION case]
>> Signed-off-by: Rob Clark <robdclark@gmail.com>
>
> This is commit ff98cb90514d9b78 in mainline now and breaks all mx6 SPL boots:
>
> U-Boot SPL 2017.09-00221-g0d6ab32 (Oct 02 2017 - 15:13:19)
> Trying to boot from MMC1
> (hangs here)
>
> Does anyone know how to fix this problem?
not sure to what extent debug()/printf() works from SPL, but if it
does maybe adding this patch with and without that commit and
comparing logs would give some hint:
--------------
diff --git a/disk/part.c b/disk/part.c
index aa9183d696..8e0bf54b3e 100644
--- a/disk/part.c
+++ b/disk/part.c
@@ -5,6 +5,8 @@
* SPDX-License-Identifier: GPL-2.0+
*/
+#define DEBUG
+
#include <common.h>
#include <command.h>
#include <errno.h>
@@ -13,7 +15,7 @@
#include <part.h>
#include <ubifs_uboot.h>
-#undef PART_DEBUG
+#define PART_DEBUG
#ifdef PART_DEBUG
#define PRINTF(fmt,args...) printf (fmt ,##args)
--------------
I don't really see why this commit would cause problems, but I guess
either something unexpected going on w/ partitions or block device
driver on this platform..
BR,
-R
^ permalink raw reply related [flat|nested] 72+ messages in thread
* [U-Boot] [PATCH v3 02/21] part: extract MBR signature from partitions
2017-10-02 19:35 ` Rob Clark
@ 2017-10-03 1:52 ` Fabio Estevam
0 siblings, 0 replies; 72+ messages in thread
From: Fabio Estevam @ 2017-10-03 1:52 UTC (permalink / raw)
To: u-boot
Hi Rob,
On Mon, Oct 2, 2017 at 4:35 PM, Rob Clark <robdclark@gmail.com> wrote:
> not sure to what extent debug()/printf() works from SPL, but if it
> does maybe adding this patch with and without that commit and
> comparing logs would give some hint:
Unfortunately I don't get any logs with this debug patch.
> I don't really see why this commit would cause problems, but I guess
> either something unexpected going on w/ partitions or block device
> driver on this platform..
I have just sent a RFC patch that fixes the boot here.
^ permalink raw reply [flat|nested] 72+ messages in thread
* [U-Boot] [PATCH v3 03/21] efi: add some missing __packed
2017-09-13 22:05 [U-Boot] [PATCH v3 00/21] efi_loader: enough UEFI for standard distro boot Rob Clark
2017-09-13 22:05 ` [U-Boot] [PATCH v3 01/21] part: move efi_guid_t Rob Clark
2017-09-13 22:05 ` [U-Boot] [PATCH v3 02/21] part: extract MBR signature from partitions Rob Clark
@ 2017-09-13 22:05 ` Rob Clark
2017-09-15 18:53 ` [U-Boot] [U-Boot,v3,03/21] " Heinrich Schuchardt
2017-09-21 7:04 ` Alexander Graf
2017-09-13 22:05 ` [U-Boot] [PATCH v3 04/21] efi: add some more device path structures Rob Clark
` (18 subsequent siblings)
21 siblings, 2 replies; 72+ messages in thread
From: Rob Clark @ 2017-09-13 22:05 UTC (permalink / raw)
To: u-boot
All of the device-path related structures should be packed. UEFI
defines the device-path as a byte-aligned data structure.
Signed-off-by: Rob Clark <robdclark@gmail.com>
---
include/efi_api.h | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/include/efi_api.h b/include/efi_api.h
index ec1b321e8e..175341348e 100644
--- a/include/efi_api.h
+++ b/include/efi_api.h
@@ -284,11 +284,11 @@ struct efi_device_path {
u8 type;
u8 sub_type;
u16 length;
-};
+} __packed;
struct efi_mac_addr {
u8 addr[32];
-};
+} __packed;
#define DEVICE_PATH_TYPE_MESSAGING_DEVICE 0x03
# define DEVICE_PATH_SUB_TYPE_MSG_MAC_ADDR 0x0b
@@ -297,7 +297,7 @@ struct efi_device_path_mac_addr {
struct efi_device_path dp;
struct efi_mac_addr mac;
u8 if_type;
-};
+} __packed;
#define DEVICE_PATH_TYPE_MEDIA_DEVICE 0x04
# define DEVICE_PATH_SUB_TYPE_FILE_PATH 0x04
@@ -305,7 +305,7 @@ struct efi_device_path_mac_addr {
struct efi_device_path_file_path {
struct efi_device_path dp;
u16 str[32];
-};
+} __packed;
#define BLOCK_IO_GUID \
EFI_GUID(0x964e5b21, 0x6459, 0x11d2, \
--
2.13.5
^ permalink raw reply related [flat|nested] 72+ messages in thread* [U-Boot] [U-Boot,v3,03/21] efi: add some missing __packed
2017-09-13 22:05 ` [U-Boot] [PATCH v3 03/21] efi: add some missing __packed Rob Clark
@ 2017-09-15 18:53 ` Heinrich Schuchardt
2017-09-15 18:58 ` Rob Clark
2017-10-03 14:34 ` Peter Jones
2017-09-21 7:04 ` Alexander Graf
1 sibling, 2 replies; 72+ messages in thread
From: Heinrich Schuchardt @ 2017-09-15 18:53 UTC (permalink / raw)
To: u-boot
On 09/14/2017 12:05 AM, Rob Clark wrote:
> All of the device-path related structures should be packed. UEFI
> defines the device-path as a byte-aligned data structure.
>
> Signed-off-by: Rob Clark <robdclark@gmail.com>
> ---
> include/efi_api.h | 8 ++++----
> 1 file changed, 4 insertions(+), 4 deletions(-)
>
> diff --git a/include/efi_api.h b/include/efi_api.h
> index ec1b321e8e..175341348e 100644
> --- a/include/efi_api.h
> +++ b/include/efi_api.h
> @@ -284,11 +284,11 @@ struct efi_device_path {
> u8 type;
> u8 sub_type;
> u16 length;
> -};
> +} __packed;
>
> struct efi_mac_addr {
> u8 addr[32];
Hello Alex, hello Rob,
32 bytes is more than the 6 bytes than we need.
Why was the structure defined this way?
> -};
> +} __packed;
>
> #define DEVICE_PATH_TYPE_MESSAGING_DEVICE 0x03
> # define DEVICE_PATH_SUB_TYPE_MSG_MAC_ADDR 0x0b
> @@ -297,7 +297,7 @@ struct efi_device_path_mac_addr {
> struct efi_device_path dp;
> struct efi_mac_addr mac;
> u8 if_type;
> -};
> +} __packed;
>
> #define DEVICE_PATH_TYPE_MEDIA_DEVICE 0x04
> # define DEVICE_PATH_SUB_TYPE_FILE_PATH 0x04
> @@ -305,7 +305,7 @@ struct efi_device_path_mac_addr {
> struct efi_device_path_file_path {
> struct efi_device_path dp;
> u16 str[32];
Where do we get this 32 from?
Couldn't file/directory names be shorter (1 character) or longer (255
characters)?
Regards
Heinrich
> -};
> +} __packed;
>
> #define BLOCK_IO_GUID \
> EFI_GUID(0x964e5b21, 0x6459, 0x11d2, \
>
^ permalink raw reply [flat|nested] 72+ messages in thread* [U-Boot] [U-Boot,v3,03/21] efi: add some missing __packed
2017-09-15 18:53 ` [U-Boot] [U-Boot,v3,03/21] " Heinrich Schuchardt
@ 2017-09-15 18:58 ` Rob Clark
2017-10-03 14:34 ` Peter Jones
1 sibling, 0 replies; 72+ messages in thread
From: Rob Clark @ 2017-09-15 18:58 UTC (permalink / raw)
To: u-boot
On Fri, Sep 15, 2017 at 2:53 PM, Heinrich Schuchardt <xypron.glpk@gmx.de> wrote:
> On 09/14/2017 12:05 AM, Rob Clark wrote:
>> All of the device-path related structures should be packed. UEFI
>> defines the device-path as a byte-aligned data structure.
>>
>> Signed-off-by: Rob Clark <robdclark@gmail.com>
>> ---
>> include/efi_api.h | 8 ++++----
>> 1 file changed, 4 insertions(+), 4 deletions(-)
>>
>> diff --git a/include/efi_api.h b/include/efi_api.h
>> index ec1b321e8e..175341348e 100644
>> --- a/include/efi_api.h
>> +++ b/include/efi_api.h
>> @@ -284,11 +284,11 @@ struct efi_device_path {
>> u8 type;
>> u8 sub_type;
>> u16 length;
>> -};
>> +} __packed;
>>
>> struct efi_mac_addr {
>> u8 addr[32];
>
> Hello Alex, hello Rob,
>
> 32 bytes is more than the 6 bytes than we need.
> Why was the structure defined this way?
>
Off the top of my head, I'm not sure where that came from, maybe this
dp node is meant to be variable length? But I guess that is also a
separate patch.
>> -};
>> +} __packed;
>>
>> #define DEVICE_PATH_TYPE_MESSAGING_DEVICE 0x03
>> # define DEVICE_PATH_SUB_TYPE_MSG_MAC_ADDR 0x0b
>> @@ -297,7 +297,7 @@ struct efi_device_path_mac_addr {
>> struct efi_device_path dp;
>> struct efi_mac_addr mac;
>> u8 if_type;
>> -};
>> +} __packed;
>>
>> #define DEVICE_PATH_TYPE_MEDIA_DEVICE 0x04
>> # define DEVICE_PATH_SUB_TYPE_FILE_PATH 0x04
>> @@ -305,7 +305,7 @@ struct efi_device_path_mac_addr {
>> struct efi_device_path_file_path {
>> struct efi_device_path dp;
>> u16 str[32];
>
> Where do we get this 32 from?
> Couldn't file/directory names be shorter (1 character) or longer (255
> characters)?
>
yup, file-path nodes should be variable length (and are after my
patches.. I have a later one that changes it to 'u16 str[]')
I believe the hard-coded 32 is due to current staticly initialized
device-path structs which go away with "efi_loader: refactor boot
device and loaded_image handling"
BR,
-R
^ permalink raw reply [flat|nested] 72+ messages in thread* [U-Boot] [U-Boot,v3,03/21] efi: add some missing __packed
2017-09-15 18:53 ` [U-Boot] [U-Boot,v3,03/21] " Heinrich Schuchardt
2017-09-15 18:58 ` Rob Clark
@ 2017-10-03 14:34 ` Peter Jones
1 sibling, 0 replies; 72+ messages in thread
From: Peter Jones @ 2017-10-03 14:34 UTC (permalink / raw)
To: u-boot
On Fri, Sep 15, 2017 at 06:53:39PM +0000, Heinrich Schuchardt wrote:
> On 09/14/2017 12:05 AM, Rob Clark wrote:
> > All of the device-path related structures should be packed. UEFI
> > defines the device-path as a byte-aligned data structure.
> >
> > Signed-off-by: Rob Clark <robdclark@gmail.com>
> > ---
> > include/efi_api.h | 8 ++++----
> > 1 file changed, 4 insertions(+), 4 deletions(-)
> >
> > diff --git a/include/efi_api.h b/include/efi_api.h
> > index ec1b321e8e..175341348e 100644
> > --- a/include/efi_api.h
> > +++ b/include/efi_api.h
> > @@ -284,11 +284,11 @@ struct efi_device_path {
> > u8 type;
> > u8 sub_type;
> > u16 length;
> > -};
> > +} __packed;
> >
> > struct efi_mac_addr {
> > u8 addr[32];
>
> Hello Alex, hello Rob,
>
> 32 bytes is more than the 6 bytes than we need.
> Why was the structure defined this way?
It probably *should* have been variable length in the spec, but it is
defined as 32-bytes. But 6 is also not correct - it's right for
ethernet, but not for everything. I suspect they picked the length of
an IPoIB (Infiniband) MAC here.
>
> > -};
> > +} __packed;
> >
> > #define DEVICE_PATH_TYPE_MESSAGING_DEVICE 0x03
> > # define DEVICE_PATH_SUB_TYPE_MSG_MAC_ADDR 0x0b
> > @@ -297,7 +297,7 @@ struct efi_device_path_mac_addr {
> > struct efi_device_path dp;
> > struct efi_mac_addr mac;
> > u8 if_type;
> > -};
> > +} __packed;
> >
> > #define DEVICE_PATH_TYPE_MEDIA_DEVICE 0x04
> > # define DEVICE_PATH_SUB_TYPE_FILE_PATH 0x04
> > @@ -305,7 +305,7 @@ struct efi_device_path_mac_addr {
> > struct efi_device_path_file_path {
> > struct efi_device_path dp;
> > u16 str[32];
>
> Where do we get this 32 from?
> Couldn't file/directory names be shorter (1 character) or longer (255
> characters)?
Note there's already another patch in this series fixing this.
--
Peter
^ permalink raw reply [flat|nested] 72+ messages in thread
* [U-Boot] [U-Boot,v3,03/21] efi: add some missing __packed
2017-09-13 22:05 ` [U-Boot] [PATCH v3 03/21] efi: add some missing __packed Rob Clark
2017-09-15 18:53 ` [U-Boot] [U-Boot,v3,03/21] " Heinrich Schuchardt
@ 2017-09-21 7:04 ` Alexander Graf
1 sibling, 0 replies; 72+ messages in thread
From: Alexander Graf @ 2017-09-21 7:04 UTC (permalink / raw)
To: u-boot
> All of the device-path related structures should be packed. UEFI
> defines the device-path as a byte-aligned data structure.
>
> Signed-off-by: Rob Clark <robdclark@gmail.com>
Thanks, applied to efi-next
Alex
^ permalink raw reply [flat|nested] 72+ messages in thread
* [U-Boot] [PATCH v3 04/21] efi: add some more device path structures
2017-09-13 22:05 [U-Boot] [PATCH v3 00/21] efi_loader: enough UEFI for standard distro boot Rob Clark
` (2 preceding siblings ...)
2017-09-13 22:05 ` [U-Boot] [PATCH v3 03/21] efi: add some missing __packed Rob Clark
@ 2017-09-13 22:05 ` Rob Clark
2017-09-21 7:04 ` [U-Boot] [U-Boot, v3, " Alexander Graf
2017-09-13 22:05 ` [U-Boot] [PATCH v3 05/21] efi_loader: add device-path utils Rob Clark
` (17 subsequent siblings)
21 siblings, 1 reply; 72+ messages in thread
From: Rob Clark @ 2017-09-13 22:05 UTC (permalink / raw)
To: u-boot
From: Peter Jones <pjones@redhat.com>
Signed-off-by: Peter Jones <pjones@redhat.com>
Signed-off-by: Rob Clark <robdclark@gmail.com>
---
include/efi_api.h | 54 ++++++++++++++++++++++++++++++++++++++++++++++++++++++
1 file changed, 54 insertions(+)
diff --git a/include/efi_api.h b/include/efi_api.h
index 175341348e..b761cf4822 100644
--- a/include/efi_api.h
+++ b/include/efi_api.h
@@ -290,8 +290,38 @@ struct efi_mac_addr {
u8 addr[32];
} __packed;
+#define DEVICE_PATH_TYPE_HARDWARE_DEVICE 0x01
+# define DEVICE_PATH_SUB_TYPE_VENDOR 0x04
+
+struct efi_device_path_vendor {
+ struct efi_device_path dp;
+ efi_guid_t guid;
+ u8 vendor_data[];
+} __packed;
+
+#define DEVICE_PATH_TYPE_ACPI_DEVICE 0x02
+# define DEVICE_PATH_SUB_TYPE_ACPI_DEVICE 0x01
+
+#define EFI_PNP_ID(ID) (u32)(((ID) << 16) | 0x41D0)
+#define EISA_PNP_ID(ID) EFI_PNP_ID(ID)
+
+struct efi_device_path_acpi_path {
+ struct efi_device_path dp;
+ u32 hid;
+ u32 uid;
+} __packed;
+
#define DEVICE_PATH_TYPE_MESSAGING_DEVICE 0x03
+# define DEVICE_PATH_SUB_TYPE_MSG_USB 0x05
# define DEVICE_PATH_SUB_TYPE_MSG_MAC_ADDR 0x0b
+# define DEVICE_PATH_SUB_TYPE_MSG_SD 0x1a
+# define DEVICE_PATH_SUB_TYPE_MSG_MMC 0x1d
+
+struct efi_device_path_usb {
+ struct efi_device_path dp;
+ u8 parent_port_number;
+ u8 usb_interface;
+} __packed;
struct efi_device_path_mac_addr {
struct efi_device_path dp;
@@ -299,9 +329,33 @@ struct efi_device_path_mac_addr {
u8 if_type;
} __packed;
+struct efi_device_path_sd_mmc_path {
+ struct efi_device_path dp;
+ u8 slot_number;
+} __packed;
+
#define DEVICE_PATH_TYPE_MEDIA_DEVICE 0x04
+# define DEVICE_PATH_SUB_TYPE_HARD_DRIVE_PATH 0x01
+# define DEVICE_PATH_SUB_TYPE_CDROM_PATH 0x02
# define DEVICE_PATH_SUB_TYPE_FILE_PATH 0x04
+struct efi_device_path_hard_drive_path {
+ struct efi_device_path dp;
+ u32 partition_number;
+ u64 partition_start;
+ u64 partition_end;
+ u8 partition_signature[16];
+ u8 partmap_type;
+ u8 signature_type;
+} __packed;
+
+struct efi_device_path_cdrom_path {
+ struct efi_device_path dp;
+ u32 boot_entry;
+ u64 partition_start;
+ u64 partition_end;
+} __packed;
+
struct efi_device_path_file_path {
struct efi_device_path dp;
u16 str[32];
--
2.13.5
^ permalink raw reply related [flat|nested] 72+ messages in thread* [U-Boot] [PATCH v3 05/21] efi_loader: add device-path utils
2017-09-13 22:05 [U-Boot] [PATCH v3 00/21] efi_loader: enough UEFI for standard distro boot Rob Clark
` (3 preceding siblings ...)
2017-09-13 22:05 ` [U-Boot] [PATCH v3 04/21] efi: add some more device path structures Rob Clark
@ 2017-09-13 22:05 ` Rob Clark
2017-09-20 8:31 ` Alexander Graf
` (2 more replies)
2017-09-13 22:05 ` [U-Boot] [PATCH v3 06/21] efi_loader: drop redundant efi_device_path_protocol Rob Clark
` (16 subsequent siblings)
21 siblings, 3 replies; 72+ messages in thread
From: Rob Clark @ 2017-09-13 22:05 UTC (permalink / raw)
To: u-boot
Helpers to construct device-paths from devices, partitions, files, and
for parsing and manipulating device-paths.
For non-legacy devices, this will use u-boot's device-model to construct
device-paths which include bus hierarchy to construct device-paths. For
legacy devices we still fake it, but slightly more convincingly.
Signed-off-by: Rob Clark <robdclark@gmail.com>
---
include/efi_api.h | 10 +
include/efi_loader.h | 26 ++
lib/efi_loader/Makefile | 2 +-
lib/efi_loader/efi_boottime.c | 13 +-
lib/efi_loader/efi_device_path.c | 563 +++++++++++++++++++++++++++++++++++++++
5 files changed, 611 insertions(+), 3 deletions(-)
create mode 100644 lib/efi_loader/efi_device_path.c
diff --git a/include/efi_api.h b/include/efi_api.h
index b761cf4822..4e27c82129 100644
--- a/include/efi_api.h
+++ b/include/efi_api.h
@@ -314,6 +314,7 @@ struct efi_device_path_acpi_path {
#define DEVICE_PATH_TYPE_MESSAGING_DEVICE 0x03
# define DEVICE_PATH_SUB_TYPE_MSG_USB 0x05
# define DEVICE_PATH_SUB_TYPE_MSG_MAC_ADDR 0x0b
+# define DEVICE_PATH_SUB_TYPE_MSG_USB_CLASS 0x0f
# define DEVICE_PATH_SUB_TYPE_MSG_SD 0x1a
# define DEVICE_PATH_SUB_TYPE_MSG_MMC 0x1d
@@ -329,6 +330,15 @@ struct efi_device_path_mac_addr {
u8 if_type;
} __packed;
+struct efi_device_path_usb_class {
+ struct efi_device_path dp;
+ u16 vendor_id;
+ u16 product_id;
+ u8 device_class;
+ u8 device_subclass;
+ u8 device_protocol;
+} __packed;
+
struct efi_device_path_sd_mmc_path {
struct efi_device_path dp;
u8 slot_number;
diff --git a/include/efi_loader.h b/include/efi_loader.h
index 1179234f68..d052b03ab7 100644
--- a/include/efi_loader.h
+++ b/include/efi_loader.h
@@ -197,6 +197,32 @@ extern void *efi_bounce_buffer;
#define EFI_LOADER_BOUNCE_BUFFER_SIZE (64 * 1024 * 1024)
#endif
+
+struct efi_device_path *efi_dp_next(const struct efi_device_path *dp);
+int efi_dp_match(struct efi_device_path *a, struct efi_device_path *b);
+struct efi_object *efi_dp_find_obj(struct efi_device_path *dp,
+ struct efi_device_path **rem);
+unsigned efi_dp_size(const struct efi_device_path *dp);
+struct efi_device_path *efi_dp_dup(const struct efi_device_path *dp);
+struct efi_device_path *efi_dp_append(const struct efi_device_path *dp1,
+ const struct efi_device_path *dp2);
+struct efi_device_path *efi_dp_append_node(const struct efi_device_path *dp,
+ const struct efi_device_path *node);
+
+
+struct efi_device_path *efi_dp_from_dev(struct udevice *dev);
+struct efi_device_path *efi_dp_from_part(struct blk_desc *desc, int part);
+struct efi_device_path *efi_dp_from_file(struct blk_desc *desc, int part,
+ const char *path);
+struct efi_device_path *efi_dp_from_eth(void);
+void efi_dp_split_file_path(struct efi_device_path *full_path,
+ struct efi_device_path **device_path,
+ struct efi_device_path **file_path);
+
+#define EFI_DP_TYPE(_dp, _type, _subtype) \
+ (((_dp)->type == DEVICE_PATH_TYPE_##_type) && \
+ ((_dp)->sub_type == DEVICE_PATH_SUB_TYPE_##_subtype))
+
/* Convert strings from normal C strings to uEFI strings */
static inline void ascii2unicode(u16 *unicode, const char *ascii)
{
diff --git a/lib/efi_loader/Makefile b/lib/efi_loader/Makefile
index 30bf343a36..f35e5ce8a8 100644
--- a/lib/efi_loader/Makefile
+++ b/lib/efi_loader/Makefile
@@ -15,7 +15,7 @@ always := $(efiprogs-y)
obj-$(CONFIG_CMD_BOOTEFI_HELLO) += helloworld_efi.o
obj-y += efi_image_loader.o efi_boottime.o efi_runtime.o efi_console.o
-obj-y += efi_memory.o efi_device_path_to_text.o
+obj-y += efi_memory.o efi_device_path_to_text.o efi_device_path.o
obj-$(CONFIG_LCD) += efi_gop.o
obj-$(CONFIG_DM_VIDEO) += efi_gop.o
obj-$(CONFIG_PARTITIONS) += efi_disk.o
diff --git a/lib/efi_loader/efi_boottime.c b/lib/efi_loader/efi_boottime.c
index 43f32385fa..b962b62a97 100644
--- a/lib/efi_loader/efi_boottime.c
+++ b/lib/efi_loader/efi_boottime.c
@@ -665,8 +665,17 @@ static efi_status_t EFIAPI efi_locate_device_path(efi_guid_t *protocol,
struct efi_device_path **device_path,
efi_handle_t *device)
{
- EFI_ENTRY("%p, %p, %p", protocol, device_path, device);
- return EFI_EXIT(EFI_NOT_FOUND);
+ struct efi_object *efiobj;
+
+ EFI_ENTRY("%pUl, %p, %p", protocol, device_path, device);
+
+ efiobj = efi_dp_find_obj(*device_path, device_path);
+ if (!efiobj)
+ return EFI_EXIT(EFI_NOT_FOUND);
+
+ *device = efiobj->handle;
+
+ return EFI_EXIT(EFI_SUCCESS);
}
/* Collapses configuration table entries, removing index i */
diff --git a/lib/efi_loader/efi_device_path.c b/lib/efi_loader/efi_device_path.c
new file mode 100644
index 0000000000..5d5c3b3464
--- /dev/null
+++ b/lib/efi_loader/efi_device_path.c
@@ -0,0 +1,563 @@
+/*
+ * EFI device path from u-boot device-model mapping
+ *
+ * (C) Copyright 2017 Rob Clark
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <blk.h>
+#include <dm.h>
+#include <usb.h>
+#include <mmc.h>
+#include <efi_loader.h>
+#include <inttypes.h>
+#include <part.h>
+
+/* template END node: */
+static const struct efi_device_path END = {
+ .type = DEVICE_PATH_TYPE_END,
+ .sub_type = DEVICE_PATH_SUB_TYPE_END,
+ .length = sizeof(END),
+};
+
+#define U_BOOT_GUID \
+ EFI_GUID(0xe61d73b9, 0xa384, 0x4acc, \
+ 0xae, 0xab, 0x82, 0xe8, 0x28, 0xf3, 0x62, 0x8b)
+
+/* template ROOT node: */
+static const struct efi_device_path_vendor ROOT = {
+ .dp = {
+ .type = DEVICE_PATH_TYPE_HARDWARE_DEVICE,
+ .sub_type = DEVICE_PATH_SUB_TYPE_VENDOR,
+ .length = sizeof(ROOT),
+ },
+ .guid = U_BOOT_GUID,
+};
+
+static void *dp_alloc(size_t sz)
+{
+ void *buf;
+
+ if (efi_allocate_pool(EFI_ALLOCATE_ANY_PAGES, sz, &buf) != EFI_SUCCESS)
+ return NULL;
+
+ return buf;
+}
+
+/*
+ * Iterate to next block in device-path, terminating (returning NULL)
+ * at /End* node.
+ */
+struct efi_device_path *efi_dp_next(const struct efi_device_path *dp)
+{
+ if (dp == NULL)
+ return NULL;
+ if (dp->type == DEVICE_PATH_TYPE_END)
+ return NULL;
+ dp = ((void *)dp) + dp->length;
+ if (dp->type == DEVICE_PATH_TYPE_END)
+ return NULL;
+ return (struct efi_device_path *)dp;
+}
+
+/*
+ * Compare two device-paths, stopping when the shorter of the two hits
+ * an End* node. This is useful to, for example, compare a device-path
+ * representing a device with one representing a file on the device, or
+ * a device with a parent device.
+ */
+int efi_dp_match(struct efi_device_path *a, struct efi_device_path *b)
+{
+ while (1) {
+ int ret;
+
+ ret = memcmp(&a->length, &b->length, sizeof(a->length));
+ if (ret)
+ return ret;
+
+ ret = memcmp(a, b, a->length);
+ if (ret)
+ return ret;
+
+ a = efi_dp_next(a);
+ b = efi_dp_next(b);
+
+ if (!a || !b)
+ return 0;
+ }
+}
+
+
+/*
+ * See UEFI spec (section 3.1.2, about short-form device-paths..
+ * tl;dr: we can have a device-path that starts with a USB WWID
+ * or USB Class node, and a few other cases which don't encode
+ * the full device path with bus hierarchy:
+ *
+ * - MESSAGING:USB_WWID
+ * - MESSAGING:USB_CLASS
+ * - MEDIA:FILE_PATH
+ * - MEDIA:HARD_DRIVE
+ * - MESSAGING:URI
+ */
+static struct efi_device_path *shorten_path(struct efi_device_path *dp)
+{
+ while (dp) {
+ /*
+ * TODO: Add MESSAGING:USB_WWID and MESSAGING:URI..
+ * in practice fallback.efi just uses MEDIA:HARD_DRIVE
+ * so not sure when we would see these other cases.
+ */
+ if (EFI_DP_TYPE(dp, MESSAGING_DEVICE, MSG_USB_CLASS) ||
+ EFI_DP_TYPE(dp, MEDIA_DEVICE, HARD_DRIVE_PATH) ||
+ EFI_DP_TYPE(dp, MEDIA_DEVICE, FILE_PATH))
+ return dp;
+
+ dp = efi_dp_next(dp);
+ }
+
+ return dp;
+}
+
+static struct efi_object *find_obj(struct efi_device_path *dp, bool short_path,
+ struct efi_device_path **rem)
+{
+ struct efi_object *efiobj;
+
+ list_for_each_entry(efiobj, &efi_obj_list, link) {
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(efiobj->protocols); i++) {
+ struct efi_handler *handler = &efiobj->protocols[i];
+ struct efi_device_path *obj_dp;
+
+ if (!handler->guid)
+ break;
+
+ if (guidcmp(handler->guid, &efi_guid_device_path))
+ continue;
+
+ obj_dp = handler->protocol_interface;
+
+ do {
+ if (efi_dp_match(dp, obj_dp) == 0) {
+ if (rem) {
+ *rem = ((void *)dp) +
+ efi_dp_size(obj_dp);
+ }
+ return efiobj;
+ }
+
+ obj_dp = shorten_path(efi_dp_next(obj_dp));
+ } while (short_path && obj_dp);
+ }
+ }
+
+ return NULL;
+}
+
+
+/*
+ * Find an efiobj from device-path, if 'rem' is not NULL, returns the
+ * remaining part of the device path after the matched object.
+ */
+struct efi_object *efi_dp_find_obj(struct efi_device_path *dp,
+ struct efi_device_path **rem)
+{
+ struct efi_object *efiobj;
+
+ efiobj = find_obj(dp, false, rem);
+
+ if (!efiobj)
+ efiobj = find_obj(dp, true, rem);
+
+ return efiobj;
+}
+
+/* return size not including End node: */
+unsigned efi_dp_size(const struct efi_device_path *dp)
+{
+ unsigned sz = 0;
+
+ while (dp) {
+ sz += dp->length;
+ dp = efi_dp_next(dp);
+ }
+
+ return sz;
+}
+
+struct efi_device_path *efi_dp_dup(const struct efi_device_path *dp)
+{
+ struct efi_device_path *ndp;
+ unsigned sz = efi_dp_size(dp) + sizeof(END);
+
+ if (!dp)
+ return NULL;
+
+ ndp = dp_alloc(sz);
+ memcpy(ndp, dp, sz);
+
+ return ndp;
+}
+
+struct efi_device_path *efi_dp_append(const struct efi_device_path *dp1,
+ const struct efi_device_path *dp2)
+{
+ struct efi_device_path *ret;
+
+ if (!dp1) {
+ ret = efi_dp_dup(dp2);
+ } else if (!dp2) {
+ ret = efi_dp_dup(dp1);
+ } else {
+ /* both dp1 and dp2 are non-null */
+ unsigned sz1 = efi_dp_size(dp1);
+ unsigned sz2 = efi_dp_size(dp2);
+ void *p = dp_alloc(sz1 + sz2 + sizeof(END));
+ memcpy(p, dp1, sz1);
+ memcpy(p + sz1, dp2, sz2);
+ memcpy(p + sz1 + sz2, &END, sizeof(END));
+ ret = p;
+ }
+
+ return ret;
+}
+
+struct efi_device_path *efi_dp_append_node(const struct efi_device_path *dp,
+ const struct efi_device_path *node)
+{
+ struct efi_device_path *ret;
+
+ if (!node && !dp) {
+ ret = efi_dp_dup(&END);
+ } else if (!node) {
+ ret = efi_dp_dup(dp);
+ } else if (!dp) {
+ unsigned sz = node->length;
+ void *p = dp_alloc(sz + sizeof(END));
+ memcpy(p, node, sz);
+ memcpy(p + sz, &END, sizeof(END));
+ ret = p;
+ } else {
+ /* both dp and node are non-null */
+ unsigned sz = efi_dp_size(dp);
+ void *p = dp_alloc(sz + node->length + sizeof(END));
+ memcpy(p, dp, sz);
+ memcpy(p + sz, node, node->length);
+ memcpy(p + sz + node->length, &END, sizeof(END));
+ ret = p;
+ }
+
+ return ret;
+}
+
+#ifdef CONFIG_DM
+/* size of device-path not including END node for device and all parents
+ * up to the root device.
+ */
+static unsigned dp_size(struct udevice *dev)
+{
+ if (!dev || !dev->driver)
+ return sizeof(ROOT);
+
+ switch (dev->driver->id) {
+ case UCLASS_ROOT:
+ case UCLASS_SIMPLE_BUS:
+ /* stop traversing parents at this point: */
+ return sizeof(ROOT);
+ case UCLASS_MMC:
+ return dp_size(dev->parent) +
+ sizeof(struct efi_device_path_sd_mmc_path);
+ case UCLASS_MASS_STORAGE:
+ case UCLASS_USB_HUB:
+ return dp_size(dev->parent) +
+ sizeof(struct efi_device_path_usb_class);
+ default:
+ /* just skip over unknown classes: */
+ return dp_size(dev->parent);
+ }
+}
+
+static void *dp_fill(void *buf, struct udevice *dev)
+{
+ if (!dev || !dev->driver)
+ return buf;
+
+ switch (dev->driver->id) {
+ case UCLASS_ROOT:
+ case UCLASS_SIMPLE_BUS: {
+ /* stop traversing parents at this point: */
+ struct efi_device_path_vendor *vdp = buf;
+ *vdp = ROOT;
+ return &vdp[1];
+ }
+#if defined(CONFIG_DM_MMC) && defined(CONFIG_MMC)
+ case UCLASS_MMC: {
+ struct efi_device_path_sd_mmc_path *sddp =
+ dp_fill(buf, dev->parent);
+ struct mmc *mmc = mmc_get_mmc_dev(dev);
+ struct blk_desc *desc = mmc_get_blk_desc(mmc);
+
+ sddp->dp.type = DEVICE_PATH_TYPE_MESSAGING_DEVICE;
+ sddp->dp.sub_type = (desc->if_type == IF_TYPE_MMC) ?
+ DEVICE_PATH_SUB_TYPE_MSG_MMC :
+ DEVICE_PATH_SUB_TYPE_MSG_SD;
+ sddp->dp.length = sizeof(*sddp);
+ sddp->slot_number = dev->seq;
+
+ return &sddp[1];
+ }
+#endif
+ case UCLASS_MASS_STORAGE:
+ case UCLASS_USB_HUB: {
+ struct efi_device_path_usb_class *udp =
+ dp_fill(buf, dev->parent);
+ struct usb_device *udev = dev_get_parent_priv(dev);
+ struct usb_device_descriptor *desc = &udev->descriptor;
+
+ udp->dp.type = DEVICE_PATH_TYPE_MESSAGING_DEVICE;
+ udp->dp.sub_type = DEVICE_PATH_SUB_TYPE_MSG_USB_CLASS;
+ udp->dp.length = sizeof(*udp);
+ udp->vendor_id = desc->idVendor;
+ udp->product_id = desc->idProduct;
+ udp->device_class = desc->bDeviceClass;
+ udp->device_subclass = desc->bDeviceSubClass;
+ udp->device_protocol = desc->bDeviceProtocol;
+
+ return &udp[1];
+ }
+ default:
+ debug("unhandled device class: %s (%u)\n",
+ dev->name, dev->driver->id);
+ return dp_fill(buf, dev->parent);
+ }
+}
+
+/* Construct a device-path from a device: */
+struct efi_device_path *efi_dp_from_dev(struct udevice *dev)
+{
+ void *buf, *start;
+
+ start = buf = dp_alloc(dp_size(dev) + sizeof(END));
+ buf = dp_fill(buf, dev);
+ *((struct efi_device_path *)buf) = END;
+
+ return start;
+}
+#endif
+
+static unsigned dp_part_size(struct blk_desc *desc, int part)
+{
+ unsigned dpsize;
+
+#ifdef CONFIG_BLK
+ dpsize = dp_size(desc->bdev->parent);
+#else
+ dpsize = sizeof(ROOT) + sizeof(struct efi_device_path_usb);
+#endif
+
+ if (part == 0) /* the actual disk, not a partition */
+ return dpsize;
+
+ if (desc->part_type == PART_TYPE_ISO)
+ dpsize += sizeof(struct efi_device_path_cdrom_path);
+ else
+ dpsize += sizeof(struct efi_device_path_hard_drive_path);
+
+ return dpsize;
+}
+
+static void *dp_part_fill(void *buf, struct blk_desc *desc, int part)
+{
+ disk_partition_t info;
+
+#ifdef CONFIG_BLK
+ buf = dp_fill(buf, desc->bdev->parent);
+#else
+ /*
+ * We *could* make a more accurate path, by looking at if_type
+ * and handling all the different cases like we do for non-
+ * legacy (ie CONFIG_BLK=y) case. But most important thing
+ * is just to have a unique device-path for if_type+devnum.
+ * So map things to a fictional USB device:
+ */
+ struct efi_device_path_usb *udp;
+
+ memcpy(buf, &ROOT, sizeof(ROOT));
+ buf += sizeof(ROOT);
+
+ udp = buf;
+ udp->dp.type = DEVICE_PATH_TYPE_MESSAGING_DEVICE;
+ udp->dp.sub_type = DEVICE_PATH_SUB_TYPE_MSG_USB;
+ udp->dp.length = sizeof(*udp);
+ udp->parent_port_number = desc->if_type;
+ udp->usb_interface = desc->devnum;
+ buf = &udp[1];
+#endif
+
+ if (part == 0) /* the actual disk, not a partition */
+ return buf;
+
+ part_get_info(desc, part, &info);
+
+ if (desc->part_type == PART_TYPE_ISO) {
+ struct efi_device_path_cdrom_path *cddp = buf;
+
+ cddp->boot_entry = part - 1;
+ cddp->dp.type = DEVICE_PATH_TYPE_MEDIA_DEVICE;
+ cddp->dp.sub_type = DEVICE_PATH_SUB_TYPE_CDROM_PATH;
+ cddp->dp.length = sizeof(*cddp);
+ cddp->partition_start = info.start;
+ cddp->partition_end = info.size;
+
+ buf = &cddp[1];
+ } else {
+ struct efi_device_path_hard_drive_path *hddp = buf;
+
+ hddp->dp.type = DEVICE_PATH_TYPE_MEDIA_DEVICE;
+ hddp->dp.sub_type = DEVICE_PATH_SUB_TYPE_HARD_DRIVE_PATH;
+ hddp->dp.length = sizeof(*hddp);
+ hddp->partition_number = part - 1;
+ hddp->partition_start = info.start;
+ hddp->partition_end = info.size;
+ if (desc->part_type == PART_TYPE_EFI)
+ hddp->partmap_type = 2;
+ else
+ hddp->partmap_type = 1;
+ hddp->signature_type = desc->sig_type;
+ if (hddp->signature_type != 0)
+ memcpy(hddp->partition_signature, &desc->guid_sig,
+ sizeof(hddp->partition_signature));
+
+ buf = &hddp[1];
+ }
+
+ return buf;
+}
+
+
+/* Construct a device-path from a partition on a blk device: */
+struct efi_device_path *efi_dp_from_part(struct blk_desc *desc, int part)
+{
+ void *buf, *start;
+
+ start = buf = dp_alloc(dp_part_size(desc, part) + sizeof(END));
+
+ buf = dp_part_fill(buf, desc, part);
+
+ *((struct efi_device_path *)buf) = END;
+
+ return start;
+}
+
+/* convert path to an UEFI style path (ie. DOS style backslashes and utf16) */
+static void path_to_uefi(u16 *uefi, const char *path)
+{
+ while (*path) {
+ char c = *(path++);
+ if (c == '/')
+ c = '\\';
+ *(uefi++) = c;
+ }
+ *uefi = '\0';
+}
+
+/*
+ * If desc is NULL, this creates a path with only the file component,
+ * otherwise it creates a full path with both device and file components
+ */
+struct efi_device_path *efi_dp_from_file(struct blk_desc *desc, int part,
+ const char *path)
+{
+ struct efi_device_path_file_path *fp;
+ void *buf, *start;
+ unsigned dpsize = 0, fpsize;
+
+ if (desc)
+ dpsize = dp_part_size(desc, part);
+
+ fpsize = sizeof(struct efi_device_path) + 2 * (strlen(path) + 1);
+ dpsize += fpsize;
+
+ start = buf = dp_alloc(dpsize + sizeof(END));
+
+ if (desc)
+ buf = dp_part_fill(buf, desc, part);
+
+ /* add file-path: */
+ fp = buf;
+ fp->dp.type = DEVICE_PATH_TYPE_MEDIA_DEVICE;
+ fp->dp.sub_type = DEVICE_PATH_SUB_TYPE_FILE_PATH;
+ fp->dp.length = fpsize;
+ path_to_uefi(fp->str, path);
+ buf += fpsize;
+
+ *((struct efi_device_path *)buf) = END;
+
+ return start;
+}
+
+#ifdef CONFIG_NET
+struct efi_device_path *efi_dp_from_eth(void)
+{
+ struct efi_device_path_mac_addr *ndp;
+ void *buf, *start;
+ unsigned dpsize = 0;
+
+ assert(eth_get_dev());
+
+#ifdef CONFIG_DM_ETH
+ dpsize += dp_size(eth_get_dev());
+#else
+ dpsize += sizeof(ROOT);
+#endif
+ dpsize += sizeof(*ndp);
+
+ start = buf = dp_alloc(dpsize + sizeof(END));
+
+#ifdef CONFIG_DM_ETH
+ buf = dp_fill(buf, eth_get_dev());
+#else
+ memcpy(buf, &ROOT, sizeof(ROOT));
+ buf += sizeof(ROOT);
+#endif
+
+ ndp = buf;
+ ndp->dp.type = DEVICE_PATH_TYPE_MESSAGING_DEVICE;
+ ndp->dp.sub_type = DEVICE_PATH_SUB_TYPE_MSG_MAC_ADDR;
+ ndp->dp.length = sizeof(*ndp);
+ memcpy(ndp->mac.addr, eth_get_ethaddr(), ARP_HLEN);
+ buf = &ndp[1];
+
+ *((struct efi_device_path *)buf) = END;
+
+ return start;
+}
+#endif
+
+/*
+ * Helper to split a full device path (containing both device and file
+ * parts) into it's constituent parts.
+ */
+void efi_dp_split_file_path(struct efi_device_path *full_path,
+ struct efi_device_path **device_path,
+ struct efi_device_path **file_path)
+{
+ struct efi_device_path *p, *dp, *fp;
+
+ dp = efi_dp_dup(full_path);
+ p = dp;
+ while (!EFI_DP_TYPE(p, MEDIA_DEVICE, FILE_PATH))
+ p = efi_dp_next(p);
+ fp = efi_dp_dup(p);
+
+ p->type = DEVICE_PATH_TYPE_END;
+ p->sub_type = DEVICE_PATH_SUB_TYPE_END;
+ p->length = sizeof(*p);
+
+ *device_path = dp;
+ *file_path = fp;
+}
--
2.13.5
^ permalink raw reply related [flat|nested] 72+ messages in thread* [U-Boot] [PATCH v3 05/21] efi_loader: add device-path utils
2017-09-13 22:05 ` [U-Boot] [PATCH v3 05/21] efi_loader: add device-path utils Rob Clark
@ 2017-09-20 8:31 ` Alexander Graf
2017-09-20 14:15 ` Rob Clark
2017-09-21 7:04 ` [U-Boot] [U-Boot,v3,05/21] " Alexander Graf
2017-10-28 15:53 ` [U-Boot] [PATCH v3 05/21] " Heinrich Schuchardt
2 siblings, 1 reply; 72+ messages in thread
From: Alexander Graf @ 2017-09-20 8:31 UTC (permalink / raw)
To: u-boot
On 14.09.17 00:05, Rob Clark wrote:
> Helpers to construct device-paths from devices, partitions, files, and
> for parsing and manipulating device-paths.
>
> For non-legacy devices, this will use u-boot's device-model to construct
> device-paths which include bus hierarchy to construct device-paths. For
> legacy devices we still fake it, but slightly more convincingly.
>
> Signed-off-by: Rob Clark <robdclark@gmail.com>
This patch gives me checkpatch warnings left and right (unsigned vs
unsigned int, double blank lines, double assignments, unsafe define,
...). I'll pull it in for now since it seems to be functionally correct,
but please fix up the warnings in a follow-up patch.
Alex
WARNING: Adding new packed members is to be done with care
#56: FILE: include/efi_api.h:340:
+} __packed;
CHECK: Please don't use multiple blank lines
#69: FILE: include/efi_loader.h:200:
+
WARNING: Prefer 'unsigned int' to bare use of 'unsigned'
#74: FILE: include/efi_loader.h:205:
+unsigned efi_dp_size(const struct efi_device_path *dp);
CHECK: Please don't use multiple blank lines
#81: FILE: include/efi_loader.h:212:
+
+
CHECK: Macro argument reuse '_dp' - possible side-effects?
#91: FILE: include/efi_loader.h:222:
+#define EFI_DP_TYPE(_dp, _type, _subtype) \
+ (((_dp)->type == DEVICE_PATH_TYPE_##_type) && \
+ ((_dp)->sub_type == DEVICE_PATH_SUB_TYPE_##_subtype))
WARNING: added, moved or deleted file(s), does MAINTAINERS need updating?
#136:
new file mode 100644
CHECK: Comparison to NULL could be written "!dp"
#195: FILE: lib/efi_loader/efi_device_path.c:55:
+ if (dp == NULL)
CHECK: Please don't use multiple blank lines
#232: FILE: lib/efi_loader/efi_device_path.c:92:
+
+
CHECK: Please don't use multiple blank lines
#301: FILE: lib/efi_loader/efi_device_path.c:161:
+
+
WARNING: Prefer 'unsigned int' to bare use of 'unsigned'
#320: FILE: lib/efi_loader/efi_device_path.c:180:
+unsigned efi_dp_size(const struct efi_device_path *dp)
WARNING: Prefer 'unsigned int' to bare use of 'unsigned'
#322: FILE: lib/efi_loader/efi_device_path.c:182:
+ unsigned sz = 0;
WARNING: Prefer 'unsigned int' to bare use of 'unsigned'
#335: FILE: lib/efi_loader/efi_device_path.c:195:
+ unsigned sz = efi_dp_size(dp) + sizeof(END);
WARNING: Prefer 'unsigned int' to bare use of 'unsigned'
#357: FILE: lib/efi_loader/efi_device_path.c:217:
+ unsigned sz1 = efi_dp_size(dp1);
WARNING: Prefer 'unsigned int' to bare use of 'unsigned'
#358: FILE: lib/efi_loader/efi_device_path.c:218:
+ unsigned sz2 = efi_dp_size(dp2);
WARNING: Missing a blank line after declarations
#360: FILE: lib/efi_loader/efi_device_path.c:220:
+ void *p = dp_alloc(sz1 + sz2 + sizeof(END));
+ memcpy(p, dp1, sz1);
WARNING: Prefer 'unsigned int' to bare use of 'unsigned'
#379: FILE: lib/efi_loader/efi_device_path.c:239:
+ unsigned sz = node->length;
WARNING: Missing a blank line after declarations
#381: FILE: lib/efi_loader/efi_device_path.c:241:
+ void *p = dp_alloc(sz + sizeof(END));
+ memcpy(p, node, sz);
WARNING: Prefer 'unsigned int' to bare use of 'unsigned'
#386: FILE: lib/efi_loader/efi_device_path.c:246:
+ unsigned sz = efi_dp_size(dp);
WARNING: Missing a blank line after declarations
#388: FILE: lib/efi_loader/efi_device_path.c:248:
+ void *p = dp_alloc(sz + node->length + sizeof(END));
+ memcpy(p, dp, sz);
WARNING: Prefer 'unsigned int' to bare use of 'unsigned'
#401: FILE: lib/efi_loader/efi_device_path.c:261:
+static unsigned dp_size(struct udevice *dev)
CHECK: multiple assignments should be avoided
#484: FILE: lib/efi_loader/efi_device_path.c:344:
+ start = buf = dp_alloc(dp_size(dev) + sizeof(END));
WARNING: Prefer 'unsigned int' to bare use of 'unsigned'
#492: FILE: lib/efi_loader/efi_device_path.c:352:
+static unsigned dp_part_size(struct blk_desc *desc, int part)
WARNING: Prefer 'unsigned int' to bare use of 'unsigned'
#494: FILE: lib/efi_loader/efi_device_path.c:354:
+ unsigned dpsize;
CHECK: Please don't use multiple blank lines
#581: FILE: lib/efi_loader/efi_device_path.c:441:
+
+
CHECK: multiple assignments should be avoided
#587: FILE: lib/efi_loader/efi_device_path.c:447:
+ start = buf = dp_alloc(dp_part_size(desc, part) + sizeof(END));
WARNING: Missing a blank line after declarations
#601: FILE: lib/efi_loader/efi_device_path.c:461:
+ char c = *(path++);
+ if (c == '/')
CHECK: Alignment should match open parenthesis
#613: FILE: lib/efi_loader/efi_device_path.c:473:
+struct efi_device_path *efi_dp_from_file(struct blk_desc *desc, int part,
+ const char *path)
WARNING: Prefer 'unsigned int' to bare use of 'unsigned'
#617: FILE: lib/efi_loader/efi_device_path.c:477:
+ unsigned dpsize = 0, fpsize;
CHECK: multiple assignments should be avoided
#625: FILE: lib/efi_loader/efi_device_path.c:485:
+ start = buf = dp_alloc(dpsize + sizeof(END));
WARNING: Prefer 'unsigned int' to bare use of 'unsigned'
#648: FILE: lib/efi_loader/efi_device_path.c:508:
+ unsigned dpsize = 0;
CHECK: multiple assignments should be avoided
#659: FILE: lib/efi_loader/efi_device_path.c:519:
+ start = buf = dp_alloc(dpsize + sizeof(END));
total: 0 errors, 19 warnings, 12 checks, 644 lines checked
NOTE: For some of the reported defects, checkpatch may be able to
mechanically convert to the typical style using --fix or
--fix-inplace.
Your patch has style problems, please review.
NOTE: Ignored message types: COMPLEX_MACRO CONSIDER_KSTRTO MINMAX
MULTISTATEMENT_MACRO_USE_DO_WHILE NETWORKING_BLOCK_COMMENT_STYLE
PREFER_ETHER_ADDR_COPY USLEEP_RANGE
NOTE: If any of the errors are false positives, please report
them to the maintainer, see CHECKPATCH in MAINTAINERS.
^ permalink raw reply [flat|nested] 72+ messages in thread* [U-Boot] [PATCH v3 05/21] efi_loader: add device-path utils
2017-09-20 8:31 ` Alexander Graf
@ 2017-09-20 14:15 ` Rob Clark
0 siblings, 0 replies; 72+ messages in thread
From: Rob Clark @ 2017-09-20 14:15 UTC (permalink / raw)
To: u-boot
On Wed, Sep 20, 2017 at 4:31 AM, Alexander Graf <agraf@suse.de> wrote:
>
>
> On 14.09.17 00:05, Rob Clark wrote:
>>
>> Helpers to construct device-paths from devices, partitions, files, and
>> for parsing and manipulating device-paths.
>>
>> For non-legacy devices, this will use u-boot's device-model to construct
>> device-paths which include bus hierarchy to construct device-paths. For
>> legacy devices we still fake it, but slightly more convincingly.
>>
>> Signed-off-by: Rob Clark <robdclark@gmail.com>
>
>
> This patch gives me checkpatch warnings left and right (unsigned vs unsigned
> int, double blank lines, double assignments, unsafe define, ...). I'll pull
> it in for now since it seems to be functionally correct, but please fix up
> the warnings in a follow-up patch.
>
>
> Alex
>
> WARNING: Adding new packed members is to be done with care
> #56: FILE: include/efi_api.h:340:
> +} __packed;
fwiw, the __packed warnings are bogus and should be ignored. Maybe
someone can fix checkpatch to whitelist efi_api.h (or just drop that
warning again).
BR,
-R
>
> CHECK: Please don't use multiple blank lines
> #69: FILE: include/efi_loader.h:200:
>
> +
>
> WARNING: Prefer 'unsigned int' to bare use of 'unsigned'
> #74: FILE: include/efi_loader.h:205:
> +unsigned efi_dp_size(const struct efi_device_path *dp);
>
> CHECK: Please don't use multiple blank lines
> #81: FILE: include/efi_loader.h:212:
> +
> +
>
> CHECK: Macro argument reuse '_dp' - possible side-effects?
> #91: FILE: include/efi_loader.h:222:
> +#define EFI_DP_TYPE(_dp, _type, _subtype) \
> + (((_dp)->type == DEVICE_PATH_TYPE_##_type) && \
> + ((_dp)->sub_type == DEVICE_PATH_SUB_TYPE_##_subtype))
>
> WARNING: added, moved or deleted file(s), does MAINTAINERS need updating?
> #136:
> new file mode 100644
>
> CHECK: Comparison to NULL could be written "!dp"
> #195: FILE: lib/efi_loader/efi_device_path.c:55:
> + if (dp == NULL)
>
> CHECK: Please don't use multiple blank lines
> #232: FILE: lib/efi_loader/efi_device_path.c:92:
> +
> +
>
> CHECK: Please don't use multiple blank lines
> #301: FILE: lib/efi_loader/efi_device_path.c:161:
> +
> +
>
> WARNING: Prefer 'unsigned int' to bare use of 'unsigned'
> #320: FILE: lib/efi_loader/efi_device_path.c:180:
> +unsigned efi_dp_size(const struct efi_device_path *dp)
>
> WARNING: Prefer 'unsigned int' to bare use of 'unsigned'
> #322: FILE: lib/efi_loader/efi_device_path.c:182:
> + unsigned sz = 0;
>
> WARNING: Prefer 'unsigned int' to bare use of 'unsigned'
> #335: FILE: lib/efi_loader/efi_device_path.c:195:
> + unsigned sz = efi_dp_size(dp) + sizeof(END);
>
> WARNING: Prefer 'unsigned int' to bare use of 'unsigned'
> #357: FILE: lib/efi_loader/efi_device_path.c:217:
> + unsigned sz1 = efi_dp_size(dp1);
>
> WARNING: Prefer 'unsigned int' to bare use of 'unsigned'
> #358: FILE: lib/efi_loader/efi_device_path.c:218:
> + unsigned sz2 = efi_dp_size(dp2);
>
> WARNING: Missing a blank line after declarations
> #360: FILE: lib/efi_loader/efi_device_path.c:220:
> + void *p = dp_alloc(sz1 + sz2 + sizeof(END));
> + memcpy(p, dp1, sz1);
>
> WARNING: Prefer 'unsigned int' to bare use of 'unsigned'
> #379: FILE: lib/efi_loader/efi_device_path.c:239:
> + unsigned sz = node->length;
>
> WARNING: Missing a blank line after declarations
> #381: FILE: lib/efi_loader/efi_device_path.c:241:
> + void *p = dp_alloc(sz + sizeof(END));
> + memcpy(p, node, sz);
>
> WARNING: Prefer 'unsigned int' to bare use of 'unsigned'
> #386: FILE: lib/efi_loader/efi_device_path.c:246:
> + unsigned sz = efi_dp_size(dp);
>
> WARNING: Missing a blank line after declarations
> #388: FILE: lib/efi_loader/efi_device_path.c:248:
> + void *p = dp_alloc(sz + node->length + sizeof(END));
> + memcpy(p, dp, sz);
>
> WARNING: Prefer 'unsigned int' to bare use of 'unsigned'
> #401: FILE: lib/efi_loader/efi_device_path.c:261:
> +static unsigned dp_size(struct udevice *dev)
>
> CHECK: multiple assignments should be avoided
> #484: FILE: lib/efi_loader/efi_device_path.c:344:
> + start = buf = dp_alloc(dp_size(dev) + sizeof(END));
>
> WARNING: Prefer 'unsigned int' to bare use of 'unsigned'
> #492: FILE: lib/efi_loader/efi_device_path.c:352:
> +static unsigned dp_part_size(struct blk_desc *desc, int part)
>
> WARNING: Prefer 'unsigned int' to bare use of 'unsigned'
> #494: FILE: lib/efi_loader/efi_device_path.c:354:
> + unsigned dpsize;
>
> CHECK: Please don't use multiple blank lines
> #581: FILE: lib/efi_loader/efi_device_path.c:441:
> +
> +
>
> CHECK: multiple assignments should be avoided
> #587: FILE: lib/efi_loader/efi_device_path.c:447:
> + start = buf = dp_alloc(dp_part_size(desc, part) + sizeof(END));
>
> WARNING: Missing a blank line after declarations
> #601: FILE: lib/efi_loader/efi_device_path.c:461:
> + char c = *(path++);
> + if (c == '/')
>
> CHECK: Alignment should match open parenthesis
> #613: FILE: lib/efi_loader/efi_device_path.c:473:
> +struct efi_device_path *efi_dp_from_file(struct blk_desc *desc, int part,
> + const char *path)
>
> WARNING: Prefer 'unsigned int' to bare use of 'unsigned'
> #617: FILE: lib/efi_loader/efi_device_path.c:477:
> + unsigned dpsize = 0, fpsize;
>
> CHECK: multiple assignments should be avoided
> #625: FILE: lib/efi_loader/efi_device_path.c:485:
> + start = buf = dp_alloc(dpsize + sizeof(END));
>
> WARNING: Prefer 'unsigned int' to bare use of 'unsigned'
> #648: FILE: lib/efi_loader/efi_device_path.c:508:
> + unsigned dpsize = 0;
>
> CHECK: multiple assignments should be avoided
> #659: FILE: lib/efi_loader/efi_device_path.c:519:
> + start = buf = dp_alloc(dpsize + sizeof(END));
>
> total: 0 errors, 19 warnings, 12 checks, 644 lines checked
>
> NOTE: For some of the reported defects, checkpatch may be able to
> mechanically convert to the typical style using --fix or
> --fix-inplace.
>
> Your patch has style problems, please review.
>
> NOTE: Ignored message types: COMPLEX_MACRO CONSIDER_KSTRTO MINMAX
> MULTISTATEMENT_MACRO_USE_DO_WHILE NETWORKING_BLOCK_COMMENT_STYLE
> PREFER_ETHER_ADDR_COPY USLEEP_RANGE
>
> NOTE: If any of the errors are false positives, please report
> them to the maintainer, see CHECKPATCH in MAINTAINERS.
>
^ permalink raw reply [flat|nested] 72+ messages in thread
* [U-Boot] [U-Boot,v3,05/21] efi_loader: add device-path utils
2017-09-13 22:05 ` [U-Boot] [PATCH v3 05/21] efi_loader: add device-path utils Rob Clark
2017-09-20 8:31 ` Alexander Graf
@ 2017-09-21 7:04 ` Alexander Graf
2017-10-28 15:53 ` [U-Boot] [PATCH v3 05/21] " Heinrich Schuchardt
2 siblings, 0 replies; 72+ messages in thread
From: Alexander Graf @ 2017-09-21 7:04 UTC (permalink / raw)
To: u-boot
> Helpers to construct device-paths from devices, partitions, files, and
> for parsing and manipulating device-paths.
>
> For non-legacy devices, this will use u-boot's device-model to construct
> device-paths which include bus hierarchy to construct device-paths. For
> legacy devices we still fake it, but slightly more convincingly.
>
> Signed-off-by: Rob Clark <robdclark@gmail.com>
Thanks, applied to efi-next
Alex
^ permalink raw reply [flat|nested] 72+ messages in thread
* [U-Boot] [PATCH v3 05/21] efi_loader: add device-path utils
2017-09-13 22:05 ` [U-Boot] [PATCH v3 05/21] efi_loader: add device-path utils Rob Clark
2017-09-20 8:31 ` Alexander Graf
2017-09-21 7:04 ` [U-Boot] [U-Boot,v3,05/21] " Alexander Graf
@ 2017-10-28 15:53 ` Heinrich Schuchardt
2 siblings, 0 replies; 72+ messages in thread
From: Heinrich Schuchardt @ 2017-10-28 15:53 UTC (permalink / raw)
To: u-boot
On 09/14/2017 12:05 AM, Rob Clark wrote:
> Helpers to construct device-paths from devices, partitions, files, and
> for parsing and manipulating device-paths.
>
> For non-legacy devices, this will use u-boot's device-model to construct
> device-paths which include bus hierarchy to construct device-paths. For
> legacy devices we still fake it, but slightly more convincingly.
>
> Signed-off-by: Rob Clark <robdclark@gmail.com>
> ---
> include/efi_api.h | 10 +
> include/efi_loader.h | 26 ++
> lib/efi_loader/Makefile | 2 +-
> lib/efi_loader/efi_boottime.c | 13 +-
> lib/efi_loader/efi_device_path.c | 563 +++++++++++++++++++++++++++++++++++++++
> 5 files changed, 611 insertions(+), 3 deletions(-)
> create mode 100644 lib/efi_loader/efi_device_path.c
>
> diff --git a/include/efi_api.h b/include/efi_api.h
> index b761cf4822..4e27c82129 100644
> --- a/include/efi_api.h
> +++ b/include/efi_api.h
> @@ -314,6 +314,7 @@ struct efi_device_path_acpi_path {
> #define DEVICE_PATH_TYPE_MESSAGING_DEVICE 0x03
> # define DEVICE_PATH_SUB_TYPE_MSG_USB 0x05
> # define DEVICE_PATH_SUB_TYPE_MSG_MAC_ADDR 0x0b
> +# define DEVICE_PATH_SUB_TYPE_MSG_USB_CLASS 0x0f
> # define DEVICE_PATH_SUB_TYPE_MSG_SD 0x1a
> # define DEVICE_PATH_SUB_TYPE_MSG_MMC 0x1d
>
> @@ -329,6 +330,15 @@ struct efi_device_path_mac_addr {
> u8 if_type;
> } __packed;
>
> +struct efi_device_path_usb_class {
> + struct efi_device_path dp;
> + u16 vendor_id;
> + u16 product_id;
> + u8 device_class;
> + u8 device_subclass;
> + u8 device_protocol;
> +} __packed;
> +
> struct efi_device_path_sd_mmc_path {
> struct efi_device_path dp;
> u8 slot_number;
> diff --git a/include/efi_loader.h b/include/efi_loader.h
> index 1179234f68..d052b03ab7 100644
> --- a/include/efi_loader.h
> +++ b/include/efi_loader.h
> @@ -197,6 +197,32 @@ extern void *efi_bounce_buffer;
> #define EFI_LOADER_BOUNCE_BUFFER_SIZE (64 * 1024 * 1024)
> #endif
>
> +
> +struct efi_device_path *efi_dp_next(const struct efi_device_path *dp);
> +int efi_dp_match(struct efi_device_path *a, struct efi_device_path *b);
> +struct efi_object *efi_dp_find_obj(struct efi_device_path *dp,
> + struct efi_device_path **rem);
> +unsigned efi_dp_size(const struct efi_device_path *dp);
> +struct efi_device_path *efi_dp_dup(const struct efi_device_path *dp);
> +struct efi_device_path *efi_dp_append(const struct efi_device_path *dp1,
> + const struct efi_device_path *dp2);
> +struct efi_device_path *efi_dp_append_node(const struct efi_device_path *dp,
> + const struct efi_device_path *node);
> +
> +
> +struct efi_device_path *efi_dp_from_dev(struct udevice *dev);
> +struct efi_device_path *efi_dp_from_part(struct blk_desc *desc, int part);
> +struct efi_device_path *efi_dp_from_file(struct blk_desc *desc, int part,
> + const char *path);
> +struct efi_device_path *efi_dp_from_eth(void);
> +void efi_dp_split_file_path(struct efi_device_path *full_path,
> + struct efi_device_path **device_path,
> + struct efi_device_path **file_path);
> +
> +#define EFI_DP_TYPE(_dp, _type, _subtype) \
> + (((_dp)->type == DEVICE_PATH_TYPE_##_type) && \
> + ((_dp)->sub_type == DEVICE_PATH_SUB_TYPE_##_subtype))
> +
> /* Convert strings from normal C strings to uEFI strings */
> static inline void ascii2unicode(u16 *unicode, const char *ascii)
> {
> diff --git a/lib/efi_loader/Makefile b/lib/efi_loader/Makefile
> index 30bf343a36..f35e5ce8a8 100644
> --- a/lib/efi_loader/Makefile
> +++ b/lib/efi_loader/Makefile
> @@ -15,7 +15,7 @@ always := $(efiprogs-y)
>
> obj-$(CONFIG_CMD_BOOTEFI_HELLO) += helloworld_efi.o
> obj-y += efi_image_loader.o efi_boottime.o efi_runtime.o efi_console.o
> -obj-y += efi_memory.o efi_device_path_to_text.o
> +obj-y += efi_memory.o efi_device_path_to_text.o efi_device_path.o
> obj-$(CONFIG_LCD) += efi_gop.o
> obj-$(CONFIG_DM_VIDEO) += efi_gop.o
> obj-$(CONFIG_PARTITIONS) += efi_disk.o
> diff --git a/lib/efi_loader/efi_boottime.c b/lib/efi_loader/efi_boottime.c
> index 43f32385fa..b962b62a97 100644
> --- a/lib/efi_loader/efi_boottime.c
> +++ b/lib/efi_loader/efi_boottime.c
> @@ -665,8 +665,17 @@ static efi_status_t EFIAPI efi_locate_device_path(efi_guid_t *protocol,
> struct efi_device_path **device_path,
> efi_handle_t *device)
> {
> - EFI_ENTRY("%p, %p, %p", protocol, device_path, device);
> - return EFI_EXIT(EFI_NOT_FOUND);
> + struct efi_object *efiobj;
> +
> + EFI_ENTRY("%pUl, %p, %p", protocol, device_path, device);
> +
> + efiobj = efi_dp_find_obj(*device_path, device_path);
The patch is already merged.
efi_dp_find_obj does not implement the logic required by
LocateDevicePath. Parameter protocol is completely ignored!
This is what LocateDevicePath is expected to do:
Start at the full device path and check if the related handle implements
the protocol.
Iteratively remove the rightmost node and try again.
Return the handle of the longest left subpath implementing the protocol.
Given handles with device paths
'/part1' and '/part1/part2' implementing 'protocol' a query
for device path '/part1/part2/part3' and 'protocol' should return the
handle of '/part1/part2' and remaining path '/part3'.
> + if (!efiobj)
> + return EFI_EXIT(EFI_NOT_FOUND);
> +
> + *device = efiobj->handle;
> +
> + return EFI_EXIT(EFI_SUCCESS);
> }
>
> /* Collapses configuration table entries, removing index i */
> diff --git a/lib/efi_loader/efi_device_path.c b/lib/efi_loader/efi_device_path.c
> new file mode 100644
> index 0000000000..5d5c3b3464
> --- /dev/null
> +++ b/lib/efi_loader/efi_device_path.c
> @@ -0,0 +1,563 @@
> +/*
> + * EFI device path from u-boot device-model mapping
> + *
> + * (C) Copyright 2017 Rob Clark
> + *
> + * SPDX-License-Identifier: GPL-2.0+
> + */
> +
> +#include <common.h>
> +#include <blk.h>
> +#include <dm.h>
> +#include <usb.h>
> +#include <mmc.h>
> +#include <efi_loader.h>
> +#include <inttypes.h>
> +#include <part.h>
> +
> +/* template END node: */
> +static const struct efi_device_path END = {
> + .type = DEVICE_PATH_TYPE_END,
> + .sub_type = DEVICE_PATH_SUB_TYPE_END,
> + .length = sizeof(END),
> +};
> +
> +#define U_BOOT_GUID \
> + EFI_GUID(0xe61d73b9, 0xa384, 0x4acc, \
> + 0xae, 0xab, 0x82, 0xe8, 0x28, 0xf3, 0x62, 0x8b)
> +
> +/* template ROOT node: */
> +static const struct efi_device_path_vendor ROOT = {
> + .dp = {
> + .type = DEVICE_PATH_TYPE_HARDWARE_DEVICE,
> + .sub_type = DEVICE_PATH_SUB_TYPE_VENDOR,
> + .length = sizeof(ROOT),
> + },
> + .guid = U_BOOT_GUID,
> +};
> +
> +static void *dp_alloc(size_t sz)
> +{
> + void *buf;
> +
> + if (efi_allocate_pool(EFI_ALLOCATE_ANY_PAGES, sz, &buf) != EFI_SUCCESS)
> + return NULL;
> +
> + return buf;
> +}
> +
> +/*
> + * Iterate to next block in device-path, terminating (returning NULL)
> + * at /End* node.
> + */
> +struct efi_device_path *efi_dp_next(const struct efi_device_path *dp)
> +{
> + if (dp == NULL)
> + return NULL;
> + if (dp->type == DEVICE_PATH_TYPE_END)
> + return NULL;
> + dp = ((void *)dp) + dp->length;
> + if (dp->type == DEVICE_PATH_TYPE_END)
> + return NULL;
> + return (struct efi_device_path *)dp;
> +}
> +
> +/*
> + * Compare two device-paths, stopping when the shorter of the two hits
> + * an End* node. This is useful to, for example, compare a device-path
> + * representing a device with one representing a file on the device, or
> + * a device with a parent device.
> + */
> +int efi_dp_match(struct efi_device_path *a, struct efi_device_path *b)
> +{
> + while (1) {
> + int ret;
> +
> + ret = memcmp(&a->length, &b->length, sizeof(a->length));
> + if (ret)
> + return ret;
> +
> + ret = memcmp(a, b, a->length);
> + if (ret)
> + return ret;
> +
> + a = efi_dp_next(a);
> + b = efi_dp_next(b);
> +
> + if (!a || !b)
> + return 0;
> + }
> +}
> +
> +
> +/*
> + * See UEFI spec (section 3.1.2, about short-form device-paths..
> + * tl;dr: we can have a device-path that starts with a USB WWID
> + * or USB Class node, and a few other cases which don't encode
> + * the full device path with bus hierarchy:
> + *
> + * - MESSAGING:USB_WWID
> + * - MESSAGING:USB_CLASS
> + * - MEDIA:FILE_PATH
> + * - MEDIA:HARD_DRIVE
> + * - MESSAGING:URI
> + */
> +static struct efi_device_path *shorten_path(struct efi_device_path *dp)
> +{
> + while (dp) {
> + /*
> + * TODO: Add MESSAGING:USB_WWID and MESSAGING:URI..
> + * in practice fallback.efi just uses MEDIA:HARD_DRIVE
> + * so not sure when we would see these other cases.
> + */
> + if (EFI_DP_TYPE(dp, MESSAGING_DEVICE, MSG_USB_CLASS) ||
> + EFI_DP_TYPE(dp, MEDIA_DEVICE, HARD_DRIVE_PATH) ||
> + EFI_DP_TYPE(dp, MEDIA_DEVICE, FILE_PATH))
> + return dp;
> +
> + dp = efi_dp_next(dp);
> + }
> +
> + return dp;
> +}
> +
> +static struct efi_object *find_obj(struct efi_device_path *dp, bool short_path,
> + struct efi_device_path **rem)
> +{
> + struct efi_object *efiobj;
> +
> + list_for_each_entry(efiobj, &efi_obj_list, link) {
> + int i;
> +
> + for (i = 0; i < ARRAY_SIZE(efiobj->protocols); i++) {
> + struct efi_handler *handler = &efiobj->protocols[i];
> + struct efi_device_path *obj_dp;
> +
> + if (!handler->guid)
> + break;
> +
> + if (guidcmp(handler->guid, &efi_guid_device_path))
> + continue;
> +
> + obj_dp = handler->protocol_interface;
> +
> + do {
> + if (efi_dp_match(dp, obj_dp) == 0) {
> + if (rem) {
> + *rem = ((void *)dp) +
> + efi_dp_size(obj_dp);
> + }
> + return efiobj;
> + }
> +
> + obj_dp = shorten_path(efi_dp_next(obj_dp));
> + } while (short_path && obj_dp);
> + }
> + }
To which part of the UEFI spec does this logic relate?
I would like to see a comment in the coding.
As this has to be refactored when moving to a linked list for protocols
a unit test (e.g. in lib/efi_selftest/) would be very helpful.
Best regards
Heinrich
> +
> + return NULL;
> +}
> +
> +
> +/*
> + * Find an efiobj from device-path, if 'rem' is not NULL, returns the
> + * remaining part of the device path after the matched object.
> + */
> +struct efi_object *efi_dp_find_obj(struct efi_device_path *dp,
> + struct efi_device_path **rem)
> +{
> + struct efi_object *efiobj;
> +
> + efiobj = find_obj(dp, false, rem);
> +
> + if (!efiobj)
> + efiobj = find_obj(dp, true, rem);
> +
> + return efiobj;
> +}
> +
> +/* return size not including End node: */
> +unsigned efi_dp_size(const struct efi_device_path *dp)
> +{
> + unsigned sz = 0;
> +
> + while (dp) {
> + sz += dp->length;
> + dp = efi_dp_next(dp);
> + }
> +
> + return sz;
> +}
> +
> +struct efi_device_path *efi_dp_dup(const struct efi_device_path *dp)
> +{
> + struct efi_device_path *ndp;
> + unsigned sz = efi_dp_size(dp) + sizeof(END);
> +
> + if (!dp)
> + return NULL;
> +
> + ndp = dp_alloc(sz);
> + memcpy(ndp, dp, sz);
> +
> + return ndp;
> +}
> +
> +struct efi_device_path *efi_dp_append(const struct efi_device_path *dp1,
> + const struct efi_device_path *dp2)
> +{
> + struct efi_device_path *ret;
> +
> + if (!dp1) {
> + ret = efi_dp_dup(dp2);
> + } else if (!dp2) {
> + ret = efi_dp_dup(dp1);
> + } else {
> + /* both dp1 and dp2 are non-null */
> + unsigned sz1 = efi_dp_size(dp1);
> + unsigned sz2 = efi_dp_size(dp2);
> + void *p = dp_alloc(sz1 + sz2 + sizeof(END));
> + memcpy(p, dp1, sz1);
> + memcpy(p + sz1, dp2, sz2);
> + memcpy(p + sz1 + sz2, &END, sizeof(END));
> + ret = p;
> + }
> +
> + return ret;
> +}
> +
> +struct efi_device_path *efi_dp_append_node(const struct efi_device_path *dp,
> + const struct efi_device_path *node)
> +{
> + struct efi_device_path *ret;
> +
> + if (!node && !dp) {
> + ret = efi_dp_dup(&END);
> + } else if (!node) {
> + ret = efi_dp_dup(dp);
> + } else if (!dp) {
> + unsigned sz = node->length;
> + void *p = dp_alloc(sz + sizeof(END));
> + memcpy(p, node, sz);
> + memcpy(p + sz, &END, sizeof(END));
> + ret = p;
> + } else {
> + /* both dp and node are non-null */
> + unsigned sz = efi_dp_size(dp);
> + void *p = dp_alloc(sz + node->length + sizeof(END));
> + memcpy(p, dp, sz);
> + memcpy(p + sz, node, node->length);
> + memcpy(p + sz + node->length, &END, sizeof(END));
> + ret = p;
> + }
> +
> + return ret;
> +}
> +
> +#ifdef CONFIG_DM
> +/* size of device-path not including END node for device and all parents
> + * up to the root device.
> + */
> +static unsigned dp_size(struct udevice *dev)
> +{
> + if (!dev || !dev->driver)
> + return sizeof(ROOT);
> +
> + switch (dev->driver->id) {
> + case UCLASS_ROOT:
> + case UCLASS_SIMPLE_BUS:
> + /* stop traversing parents at this point: */
> + return sizeof(ROOT);
> + case UCLASS_MMC:
> + return dp_size(dev->parent) +
> + sizeof(struct efi_device_path_sd_mmc_path);
> + case UCLASS_MASS_STORAGE:
> + case UCLASS_USB_HUB:
> + return dp_size(dev->parent) +
> + sizeof(struct efi_device_path_usb_class);
> + default:
> + /* just skip over unknown classes: */
> + return dp_size(dev->parent);
> + }
> +}
> +
> +static void *dp_fill(void *buf, struct udevice *dev)
> +{
> + if (!dev || !dev->driver)
> + return buf;
> +
> + switch (dev->driver->id) {
> + case UCLASS_ROOT:
> + case UCLASS_SIMPLE_BUS: {
> + /* stop traversing parents at this point: */
> + struct efi_device_path_vendor *vdp = buf;
> + *vdp = ROOT;
> + return &vdp[1];
> + }
> +#if defined(CONFIG_DM_MMC) && defined(CONFIG_MMC)
> + case UCLASS_MMC: {
> + struct efi_device_path_sd_mmc_path *sddp =
> + dp_fill(buf, dev->parent);
> + struct mmc *mmc = mmc_get_mmc_dev(dev);
> + struct blk_desc *desc = mmc_get_blk_desc(mmc);
> +
> + sddp->dp.type = DEVICE_PATH_TYPE_MESSAGING_DEVICE;
> + sddp->dp.sub_type = (desc->if_type == IF_TYPE_MMC) ?
> + DEVICE_PATH_SUB_TYPE_MSG_MMC :
> + DEVICE_PATH_SUB_TYPE_MSG_SD;
> + sddp->dp.length = sizeof(*sddp);
> + sddp->slot_number = dev->seq;
> +
> + return &sddp[1];
> + }
> +#endif
> + case UCLASS_MASS_STORAGE:
> + case UCLASS_USB_HUB: {
> + struct efi_device_path_usb_class *udp =
> + dp_fill(buf, dev->parent);
> + struct usb_device *udev = dev_get_parent_priv(dev);
> + struct usb_device_descriptor *desc = &udev->descriptor;
> +
> + udp->dp.type = DEVICE_PATH_TYPE_MESSAGING_DEVICE;
> + udp->dp.sub_type = DEVICE_PATH_SUB_TYPE_MSG_USB_CLASS;
> + udp->dp.length = sizeof(*udp);
> + udp->vendor_id = desc->idVendor;
> + udp->product_id = desc->idProduct;
> + udp->device_class = desc->bDeviceClass;
> + udp->device_subclass = desc->bDeviceSubClass;
> + udp->device_protocol = desc->bDeviceProtocol;
> +
> + return &udp[1];
> + }
> + default:
> + debug("unhandled device class: %s (%u)\n",
> + dev->name, dev->driver->id);
> + return dp_fill(buf, dev->parent);
> + }
> +}
> +
> +/* Construct a device-path from a device: */
> +struct efi_device_path *efi_dp_from_dev(struct udevice *dev)
> +{
> + void *buf, *start;
> +
> + start = buf = dp_alloc(dp_size(dev) + sizeof(END));
> + buf = dp_fill(buf, dev);
> + *((struct efi_device_path *)buf) = END;
> +
> + return start;
> +}
> +#endif
> +
> +static unsigned dp_part_size(struct blk_desc *desc, int part)
> +{
> + unsigned dpsize;
> +
> +#ifdef CONFIG_BLK
> + dpsize = dp_size(desc->bdev->parent);
> +#else
> + dpsize = sizeof(ROOT) + sizeof(struct efi_device_path_usb);
> +#endif
> +
> + if (part == 0) /* the actual disk, not a partition */
> + return dpsize;
> +
> + if (desc->part_type == PART_TYPE_ISO)
> + dpsize += sizeof(struct efi_device_path_cdrom_path);
> + else
> + dpsize += sizeof(struct efi_device_path_hard_drive_path);
> +
> + return dpsize;
> +}
> +
> +static void *dp_part_fill(void *buf, struct blk_desc *desc, int part)
> +{
> + disk_partition_t info;
> +
> +#ifdef CONFIG_BLK
> + buf = dp_fill(buf, desc->bdev->parent);
> +#else
> + /*
> + * We *could* make a more accurate path, by looking at if_type
> + * and handling all the different cases like we do for non-
> + * legacy (ie CONFIG_BLK=y) case. But most important thing
> + * is just to have a unique device-path for if_type+devnum.
> + * So map things to a fictional USB device:
> + */
> + struct efi_device_path_usb *udp;
> +
> + memcpy(buf, &ROOT, sizeof(ROOT));
> + buf += sizeof(ROOT);
> +
> + udp = buf;
> + udp->dp.type = DEVICE_PATH_TYPE_MESSAGING_DEVICE;
> + udp->dp.sub_type = DEVICE_PATH_SUB_TYPE_MSG_USB;
> + udp->dp.length = sizeof(*udp);
> + udp->parent_port_number = desc->if_type;
> + udp->usb_interface = desc->devnum;
> + buf = &udp[1];
> +#endif
> +
> + if (part == 0) /* the actual disk, not a partition */
> + return buf;
> +
> + part_get_info(desc, part, &info);
> +
> + if (desc->part_type == PART_TYPE_ISO) {
> + struct efi_device_path_cdrom_path *cddp = buf;
> +
> + cddp->boot_entry = part - 1;
> + cddp->dp.type = DEVICE_PATH_TYPE_MEDIA_DEVICE;
> + cddp->dp.sub_type = DEVICE_PATH_SUB_TYPE_CDROM_PATH;
> + cddp->dp.length = sizeof(*cddp);
> + cddp->partition_start = info.start;
> + cddp->partition_end = info.size;
> +
> + buf = &cddp[1];
> + } else {
> + struct efi_device_path_hard_drive_path *hddp = buf;
> +
> + hddp->dp.type = DEVICE_PATH_TYPE_MEDIA_DEVICE;
> + hddp->dp.sub_type = DEVICE_PATH_SUB_TYPE_HARD_DRIVE_PATH;
> + hddp->dp.length = sizeof(*hddp);
> + hddp->partition_number = part - 1;
> + hddp->partition_start = info.start;
> + hddp->partition_end = info.size;
> + if (desc->part_type == PART_TYPE_EFI)
> + hddp->partmap_type = 2;
> + else
> + hddp->partmap_type = 1;
> + hddp->signature_type = desc->sig_type;
> + if (hddp->signature_type != 0)
> + memcpy(hddp->partition_signature, &desc->guid_sig,
> + sizeof(hddp->partition_signature));
> +
> + buf = &hddp[1];
> + }
> +
> + return buf;
> +}
> +
> +
> +/* Construct a device-path from a partition on a blk device: */
> +struct efi_device_path *efi_dp_from_part(struct blk_desc *desc, int part)
> +{
> + void *buf, *start;
> +
> + start = buf = dp_alloc(dp_part_size(desc, part) + sizeof(END));
> +
> + buf = dp_part_fill(buf, desc, part);
> +
> + *((struct efi_device_path *)buf) = END;
> +
> + return start;
> +}
> +
> +/* convert path to an UEFI style path (ie. DOS style backslashes and utf16) */
> +static void path_to_uefi(u16 *uefi, const char *path)
> +{
> + while (*path) {
> + char c = *(path++);
> + if (c == '/')
> + c = '\\';
> + *(uefi++) = c;
> + }
> + *uefi = '\0';
> +}
> +
> +/*
> + * If desc is NULL, this creates a path with only the file component,
> + * otherwise it creates a full path with both device and file components
> + */
> +struct efi_device_path *efi_dp_from_file(struct blk_desc *desc, int part,
> + const char *path)
> +{
> + struct efi_device_path_file_path *fp;
> + void *buf, *start;
> + unsigned dpsize = 0, fpsize;
> +
> + if (desc)
> + dpsize = dp_part_size(desc, part);
> +
> + fpsize = sizeof(struct efi_device_path) + 2 * (strlen(path) + 1);
> + dpsize += fpsize;
> +
> + start = buf = dp_alloc(dpsize + sizeof(END));
> +
> + if (desc)
> + buf = dp_part_fill(buf, desc, part);
> +
> + /* add file-path: */
> + fp = buf;
> + fp->dp.type = DEVICE_PATH_TYPE_MEDIA_DEVICE;
> + fp->dp.sub_type = DEVICE_PATH_SUB_TYPE_FILE_PATH;
> + fp->dp.length = fpsize;
> + path_to_uefi(fp->str, path);
> + buf += fpsize;
> +
> + *((struct efi_device_path *)buf) = END;
> +
> + return start;
> +}
> +
> +#ifdef CONFIG_NET
> +struct efi_device_path *efi_dp_from_eth(void)
> +{
> + struct efi_device_path_mac_addr *ndp;
> + void *buf, *start;
> + unsigned dpsize = 0;
> +
> + assert(eth_get_dev());
> +
> +#ifdef CONFIG_DM_ETH
> + dpsize += dp_size(eth_get_dev());
> +#else
> + dpsize += sizeof(ROOT);
> +#endif
> + dpsize += sizeof(*ndp);
> +
> + start = buf = dp_alloc(dpsize + sizeof(END));
> +
> +#ifdef CONFIG_DM_ETH
> + buf = dp_fill(buf, eth_get_dev());
> +#else
> + memcpy(buf, &ROOT, sizeof(ROOT));
> + buf += sizeof(ROOT);
> +#endif
> +
> + ndp = buf;
> + ndp->dp.type = DEVICE_PATH_TYPE_MESSAGING_DEVICE;
> + ndp->dp.sub_type = DEVICE_PATH_SUB_TYPE_MSG_MAC_ADDR;
> + ndp->dp.length = sizeof(*ndp);
> + memcpy(ndp->mac.addr, eth_get_ethaddr(), ARP_HLEN);
> + buf = &ndp[1];
> +
> + *((struct efi_device_path *)buf) = END;
> +
> + return start;
> +}
> +#endif
> +
> +/*
> + * Helper to split a full device path (containing both device and file
> + * parts) into it's constituent parts.
> + */
> +void efi_dp_split_file_path(struct efi_device_path *full_path,
> + struct efi_device_path **device_path,
> + struct efi_device_path **file_path)
> +{
> + struct efi_device_path *p, *dp, *fp;
> +
> + dp = efi_dp_dup(full_path);
> + p = dp;
> + while (!EFI_DP_TYPE(p, MEDIA_DEVICE, FILE_PATH))
> + p = efi_dp_next(p);
> + fp = efi_dp_dup(p);
> +
> + p->type = DEVICE_PATH_TYPE_END;
> + p->sub_type = DEVICE_PATH_SUB_TYPE_END;
> + p->length = sizeof(*p);
> +
> + *device_path = dp;
> + *file_path = fp;
> +}
>
^ permalink raw reply [flat|nested] 72+ messages in thread
* [U-Boot] [PATCH v3 06/21] efi_loader: drop redundant efi_device_path_protocol
2017-09-13 22:05 [U-Boot] [PATCH v3 00/21] efi_loader: enough UEFI for standard distro boot Rob Clark
` (4 preceding siblings ...)
2017-09-13 22:05 ` [U-Boot] [PATCH v3 05/21] efi_loader: add device-path utils Rob Clark
@ 2017-09-13 22:05 ` Rob Clark
2017-09-21 7:04 ` [U-Boot] [U-Boot, v3, " Alexander Graf
2017-09-13 22:05 ` [U-Boot] [PATCH v3 07/21] efi_loader: flesh out device-path to text Rob Clark
` (15 subsequent siblings)
21 siblings, 1 reply; 72+ messages in thread
From: Rob Clark @ 2017-09-13 22:05 UTC (permalink / raw)
To: u-boot
This is really the same thing as the efi_device_path struct.
Signed-off-by: Rob Clark <robdclark@gmail.com>
---
include/efi_api.h | 12 ++----------
lib/efi_loader/efi_device_path_to_text.c | 13 ++++++++-----
2 files changed, 10 insertions(+), 15 deletions(-)
diff --git a/include/efi_api.h b/include/efi_api.h
index 4e27c82129..ac58fd58de 100644
--- a/include/efi_api.h
+++ b/include/efi_api.h
@@ -487,22 +487,14 @@ struct efi_console_control_protocol
EFI_GUID(0x8b843e20, 0x8132, 0x4852, \
0x90, 0xcc, 0x55, 0x1a, 0x4e, 0x4a, 0x7f, 0x1c)
-struct efi_device_path_protocol
-{
- uint8_t type;
- uint8_t sub_type;
- uint16_t length;
- uint8_t data[];
-};
-
struct efi_device_path_to_text_protocol
{
uint16_t *(EFIAPI *convert_device_node_to_text)(
- struct efi_device_path_protocol *device_node,
+ struct efi_device_path *device_node,
bool display_only,
bool allow_shortcuts);
uint16_t *(EFIAPI *convert_device_path_to_text)(
- struct efi_device_path_protocol *device_path,
+ struct efi_device_path *device_path,
bool display_only,
bool allow_shortcuts);
};
diff --git a/lib/efi_loader/efi_device_path_to_text.c b/lib/efi_loader/efi_device_path_to_text.c
index 4b2f43f0c8..f9d071ac50 100644
--- a/lib/efi_loader/efi_device_path_to_text.c
+++ b/lib/efi_loader/efi_device_path_to_text.c
@@ -16,7 +16,7 @@ const efi_guid_t efi_guid_device_path_to_text_protocol =
EFI_DEVICE_PATH_TO_TEXT_PROTOCOL_GUID;
static uint16_t *efi_convert_device_node_to_text(
- struct efi_device_path_protocol *device_node,
+ struct efi_device_path *device_node,
bool display_only,
bool allow_shortcuts)
{
@@ -55,15 +55,18 @@ static uint16_t *efi_convert_device_node_to_text(
break;
case DEVICE_PATH_TYPE_MEDIA_DEVICE:
switch (device_node->sub_type) {
- case DEVICE_PATH_SUB_TYPE_FILE_PATH:
+ case DEVICE_PATH_SUB_TYPE_FILE_PATH: {
+ struct efi_device_path_file_path *fp =
+ (struct efi_device_path_file_path *)device_node;
buffer_size = device_node->length - 4;
r = efi_allocate_pool(EFI_ALLOCATE_ANY_PAGES,
buffer_size, (void **) &buffer);
if (r != EFI_SUCCESS)
return NULL;
- memcpy(buffer, device_node->data, buffer_size);
+ memcpy(buffer, fp->str, buffer_size);
break;
}
+ }
break;
}
@@ -89,7 +92,7 @@ static uint16_t *efi_convert_device_node_to_text(
}
static uint16_t EFIAPI *efi_convert_device_node_to_text_ext(
- struct efi_device_path_protocol *device_node,
+ struct efi_device_path *device_node,
bool display_only,
bool allow_shortcuts)
{
@@ -105,7 +108,7 @@ static uint16_t EFIAPI *efi_convert_device_node_to_text_ext(
}
static uint16_t EFIAPI *efi_convert_device_path_to_text(
- struct efi_device_path_protocol *device_path,
+ struct efi_device_path *device_path,
bool display_only,
bool allow_shortcuts)
{
--
2.13.5
^ permalink raw reply related [flat|nested] 72+ messages in thread* [U-Boot] [PATCH v3 07/21] efi_loader: flesh out device-path to text
2017-09-13 22:05 [U-Boot] [PATCH v3 00/21] efi_loader: enough UEFI for standard distro boot Rob Clark
` (5 preceding siblings ...)
2017-09-13 22:05 ` [U-Boot] [PATCH v3 06/21] efi_loader: drop redundant efi_device_path_protocol Rob Clark
@ 2017-09-13 22:05 ` Rob Clark
2017-09-21 7:05 ` [U-Boot] [U-Boot, v3, " Alexander Graf
2017-09-13 22:05 ` [U-Boot] [PATCH v3 08/21] efi_loader: use proper device-paths for partitions Rob Clark
` (14 subsequent siblings)
21 siblings, 1 reply; 72+ messages in thread
From: Rob Clark @ 2017-09-13 22:05 UTC (permalink / raw)
To: u-boot
It needs to handle more device-path node types, and also multiple levels
of path hierarchy. To simplify this, initially construct utf8 string to
a temporary buffer, and then allocate the real utf16 buffer that is
returned. This should be mostly for debugging or at least not critical-
path so an extra copy won't hurt, and is saner than the alternative.
Signed-off-by: Rob Clark <robdclark@gmail.com>
---
include/efi_api.h | 1 +
include/efi_loader.h | 2 +
lib/efi_loader/efi_device_path_to_text.c | 241 +++++++++++++++++++++++--------
3 files changed, 181 insertions(+), 63 deletions(-)
diff --git a/include/efi_api.h b/include/efi_api.h
index ac58fd58de..0c36122107 100644
--- a/include/efi_api.h
+++ b/include/efi_api.h
@@ -304,6 +304,7 @@ struct efi_device_path_vendor {
#define EFI_PNP_ID(ID) (u32)(((ID) << 16) | 0x41D0)
#define EISA_PNP_ID(ID) EFI_PNP_ID(ID)
+#define EISA_PNP_NUM(ID) ((ID) >> 16)
struct efi_device_path_acpi_path {
struct efi_device_path dp;
diff --git a/include/efi_loader.h b/include/efi_loader.h
index d052b03ab7..f39c2ee6da 100644
--- a/include/efi_loader.h
+++ b/include/efi_loader.h
@@ -59,6 +59,8 @@ extern struct efi_simple_input_interface efi_con_in;
extern const struct efi_console_control_protocol efi_console_control;
extern const struct efi_device_path_to_text_protocol efi_device_path_to_text;
+uint16_t *efi_dp_str(struct efi_device_path *dp);
+
extern const efi_guid_t efi_guid_console_control;
extern const efi_guid_t efi_guid_device_path;
extern const efi_guid_t efi_guid_loaded_image;
diff --git a/lib/efi_loader/efi_device_path_to_text.c b/lib/efi_loader/efi_device_path_to_text.c
index f9d071ac50..1a5ef3919b 100644
--- a/lib/efi_loader/efi_device_path_to_text.c
+++ b/lib/efi_loader/efi_device_path_to_text.c
@@ -15,82 +15,197 @@
const efi_guid_t efi_guid_device_path_to_text_protocol =
EFI_DEVICE_PATH_TO_TEXT_PROTOCOL_GUID;
-static uint16_t *efi_convert_device_node_to_text(
- struct efi_device_path *device_node,
- bool display_only,
- bool allow_shortcuts)
+static char *dp_unknown(char *s, struct efi_device_path *dp)
{
- unsigned long buffer_size;
- efi_status_t r;
- uint16_t *buffer = NULL;
- int i;
+ s += sprintf(s, "/UNKNOWN(%04x,%04x)", dp->type, dp->sub_type);
+ return s;
+}
- switch (device_node->type) {
- case DEVICE_PATH_TYPE_END:
- return NULL;
- case DEVICE_PATH_TYPE_MESSAGING_DEVICE:
- switch (device_node->sub_type) {
- case DEVICE_PATH_SUB_TYPE_MSG_MAC_ADDR: {
- struct efi_device_path_mac_addr *dp =
- (struct efi_device_path_mac_addr *)device_node;
-
- if (dp->if_type != 0 && dp->if_type != 1)
- break;
- r = efi_allocate_pool(EFI_ALLOCATE_ANY_PAGES,
- 2 * MAC_OUTPUT_LEN,
- (void **)&buffer);
- if (r != EFI_SUCCESS)
- return NULL;
- sprintf((char *)buffer,
- "MAC(%02x%02x%02x%02x%02x%02x,0x%1x)",
- dp->mac.addr[0], dp->mac.addr[1],
- dp->mac.addr[2], dp->mac.addr[3],
- dp->mac.addr[4], dp->mac.addr[5],
- dp->if_type);
- for (i = MAC_OUTPUT_LEN - 1; i >= 0; --i)
- buffer[i] = ((uint8_t *)buffer)[i];
+static char *dp_hardware(char *s, struct efi_device_path *dp)
+{
+ switch (dp->sub_type) {
+ case DEVICE_PATH_SUB_TYPE_VENDOR: {
+ struct efi_device_path_vendor *vdp =
+ (struct efi_device_path_vendor *)dp;
+ s += sprintf(s, "/VenHw(%pUl)", &vdp->guid);
+ break;
+ }
+ default:
+ s = dp_unknown(s, dp);
+ break;
+ }
+ return s;
+}
+
+static char *dp_acpi(char *s, struct efi_device_path *dp)
+{
+ switch (dp->sub_type) {
+ case DEVICE_PATH_SUB_TYPE_ACPI_DEVICE: {
+ struct efi_device_path_acpi_path *adp =
+ (struct efi_device_path_acpi_path *)dp;
+ s += sprintf(s, "/Acpi(PNP%04x", EISA_PNP_NUM(adp->hid));
+ if (adp->uid)
+ s += sprintf(s, ",%d", adp->uid);
+ s += sprintf(s, ")");
+ break;
+ }
+ default:
+ s = dp_unknown(s, dp);
+ break;
+ }
+ return s;
+}
+
+static char *dp_msging(char *s, struct efi_device_path *dp)
+{
+ switch (dp->sub_type) {
+ case DEVICE_PATH_SUB_TYPE_MSG_USB: {
+ struct efi_device_path_usb *udp =
+ (struct efi_device_path_usb *)dp;
+ s += sprintf(s, "/Usb(0x%x,0x%x)", udp->parent_port_number,
+ udp->usb_interface);
+ break;
+ }
+ case DEVICE_PATH_SUB_TYPE_MSG_MAC_ADDR: {
+ struct efi_device_path_mac_addr *mdp =
+ (struct efi_device_path_mac_addr *)dp;
+
+ if (mdp->if_type != 0 && mdp->if_type != 1)
break;
- }
- }
+
+ s += sprintf(s, "/MAC(%02x%02x%02x%02x%02x%02x,0x%1x)",
+ mdp->mac.addr[0], mdp->mac.addr[1],
+ mdp->mac.addr[2], mdp->mac.addr[3],
+ mdp->mac.addr[4], mdp->mac.addr[5],
+ mdp->if_type);
+
+ break;
+ }
+ case DEVICE_PATH_SUB_TYPE_MSG_USB_CLASS: {
+ struct efi_device_path_usb_class *ucdp =
+ (struct efi_device_path_usb_class *)dp;
+
+ s += sprintf(s, "/USBClass(%x,%x,%x,%x,%x)",
+ ucdp->vendor_id, ucdp->product_id,
+ ucdp->device_class, ucdp->device_subclass,
+ ucdp->device_protocol);
+
+ break;
+ }
+ case DEVICE_PATH_SUB_TYPE_MSG_SD:
+ case DEVICE_PATH_SUB_TYPE_MSG_MMC: {
+ const char *typename =
+ (dp->sub_type == DEVICE_PATH_SUB_TYPE_MSG_SD) ?
+ "SDCard" : "MMC";
+ struct efi_device_path_sd_mmc_path *sddp =
+ (struct efi_device_path_sd_mmc_path *)dp;
+ s += sprintf(s, "/%s(Slot%u)", typename, sddp->slot_number);
+ break;
+ }
+ default:
+ s = dp_unknown(s, dp);
break;
- case DEVICE_PATH_TYPE_MEDIA_DEVICE:
- switch (device_node->sub_type) {
- case DEVICE_PATH_SUB_TYPE_FILE_PATH: {
- struct efi_device_path_file_path *fp =
- (struct efi_device_path_file_path *)device_node;
- buffer_size = device_node->length - 4;
- r = efi_allocate_pool(EFI_ALLOCATE_ANY_PAGES,
- buffer_size, (void **) &buffer);
- if (r != EFI_SUCCESS)
- return NULL;
- memcpy(buffer, fp->str, buffer_size);
+ }
+ return s;
+}
+
+static char *dp_media(char *s, struct efi_device_path *dp)
+{
+ switch (dp->sub_type) {
+ case DEVICE_PATH_SUB_TYPE_HARD_DRIVE_PATH: {
+ struct efi_device_path_hard_drive_path *hddp =
+ (struct efi_device_path_hard_drive_path *)dp;
+ void *sig = hddp->partition_signature;
+
+ switch (hddp->signature_type) {
+ case SIG_TYPE_MBR:
+ s += sprintf(s, "/HD(Part%d,Sig%08x)",
+ hddp->partition_number,
+ *(uint32_t *)sig);
break;
+ case SIG_TYPE_GUID:
+ s += sprintf(s, "/HD(Part%d,Sig%pUl)",
+ hddp->partition_number, sig);
+ default:
+ s += sprintf(s, "/HD(Part%d,MBRType=%02x,SigType=%02x)",
+ hddp->partition_number, hddp->partmap_type,
+ hddp->signature_type);
}
- }
+
+ break;
+ }
+ case DEVICE_PATH_SUB_TYPE_CDROM_PATH: {
+ struct efi_device_path_cdrom_path *cddp =
+ (struct efi_device_path_cdrom_path *)dp;
+ s += sprintf(s, "/CDROM(0x%x)", cddp->boot_entry);
+ break;
+ }
+ case DEVICE_PATH_SUB_TYPE_FILE_PATH: {
+ struct efi_device_path_file_path *fp =
+ (struct efi_device_path_file_path *)dp;
+ int slen = (dp->length - sizeof(*dp)) / 2;
+ s += sprintf(s, "/%-*ls", slen, fp->str);
+ break;
+ }
+ default:
+ s = dp_unknown(s, dp);
break;
}
+ return s;
+}
- /*
- * For all node types that we do not yet support return
- * 'UNKNOWN(type,subtype)'.
- */
- if (!buffer) {
- r = efi_allocate_pool(EFI_ALLOCATE_ANY_PAGES,
- 2 * UNKNOWN_OUTPUT_LEN,
- (void **)&buffer);
- if (r != EFI_SUCCESS)
- return NULL;
- sprintf((char *)buffer,
- "UNKNOWN(%04x,%04x)",
- device_node->type,
- device_node->sub_type);
- for (i = UNKNOWN_OUTPUT_LEN - 1; i >= 0; --i)
- buffer[i] = ((uint8_t *)buffer)[i];
+static uint16_t *efi_convert_device_node_to_text(
+ struct efi_device_path *dp,
+ bool display_only,
+ bool allow_shortcuts)
+{
+ unsigned long len;
+ efi_status_t r;
+ char buf[512]; /* this ought be be big enough for worst case */
+ char *str = buf;
+ uint16_t *out;
+
+ while (dp) {
+ switch (dp->type) {
+ case DEVICE_PATH_TYPE_HARDWARE_DEVICE:
+ str = dp_hardware(str, dp);
+ break;
+ case DEVICE_PATH_TYPE_ACPI_DEVICE:
+ str = dp_acpi(str, dp);
+ break;
+ case DEVICE_PATH_TYPE_MESSAGING_DEVICE:
+ str = dp_msging(str, dp);
+ break;
+ case DEVICE_PATH_TYPE_MEDIA_DEVICE:
+ str = dp_media(str, dp);
+ break;
+ default:
+ str = dp_unknown(str, dp);
+ }
+
+ dp = efi_dp_next(dp);
}
- return buffer;
+ *str++ = '\0';
+
+ len = str - buf;
+ r = efi_allocate_pool(EFI_ALLOCATE_ANY_PAGES, 2 * len, (void **)&out);
+ if (r != EFI_SUCCESS)
+ return NULL;
+
+ ascii2unicode(out, buf);
+ out[len - 1] = 0;
+
+ return out;
}
+/* helper for debug prints.. efi_free_pool() the result. */
+uint16_t *efi_dp_str(struct efi_device_path *dp)
+{
+ return efi_convert_device_node_to_text(dp, true, true);
+}
+
+
static uint16_t EFIAPI *efi_convert_device_node_to_text_ext(
struct efi_device_path *device_node,
bool display_only,
--
2.13.5
^ permalink raw reply related [flat|nested] 72+ messages in thread* [U-Boot] [PATCH v3 08/21] efi_loader: use proper device-paths for partitions
2017-09-13 22:05 [U-Boot] [PATCH v3 00/21] efi_loader: enough UEFI for standard distro boot Rob Clark
` (6 preceding siblings ...)
2017-09-13 22:05 ` [U-Boot] [PATCH v3 07/21] efi_loader: flesh out device-path to text Rob Clark
@ 2017-09-13 22:05 ` Rob Clark
2017-09-21 7:05 ` [U-Boot] [U-Boot, v3, " Alexander Graf
2017-09-13 22:05 ` [U-Boot] [PATCH v3 09/21] efi_loader: use proper device-paths for net Rob Clark
` (13 subsequent siblings)
21 siblings, 1 reply; 72+ messages in thread
From: Rob Clark @ 2017-09-13 22:05 UTC (permalink / raw)
To: u-boot
Also, create disk objects for the disk itself, in addition to the
partitions. (UEFI terminology is a bit confusing, a "disk" object is
really a partition.) This helps grub properly identify the boot device
since it is trying to match up partition "disk" object with it's parent
device.
Now instead of seeing devices like:
/File(sdhci at 07864000.blk)/EndEntire
/File(usb_mass_storage.lun0)/EndEntire
You see:
/ACPI(133741d0,0)/UnknownMessaging(1d)/EndEntire
/ACPI(133741d0,0)/UnknownMessaging(1d)/HD(0,800,64000,dd904a8c00000000,1,1)/EndEntire
/ACPI(133741d0,0)/UnknownMessaging(1d)/HD(1,64800,200000,dd904a8c00000000,1,1)/EndEntire
/ACPI(133741d0,0)/UnknownMessaging(1d)/HD(2,264800,19a000,dd904a8c00000000,1,1)/EndEntire
/ACPI(133741d0,0)/USB(0,0)/USB(0,0)/USB(0,0)/EndEntire
/ACPI(133741d0,0)/USB(0,0)/USB(0,0)/USB(0,0)/HD(0,800,60000,38ca680200000000,1,1)/EndEntire
/ACPI(133741d0,0)/USB(0,0)/USB(0,0)/USB(0,0)/HD(1,61000,155000,38ca680200000000,1,1)/EndEntire
/ACPI(133741d0,0)/USB(0,0)/USB(0,0)/USB(0,0)/HD(2,20fa800,1bbf8800,38ca680200000000,1,1)/EndEntire
/ACPI(133741d0,0)/USB(0,0)/USB(0,0)/USB(0,0)/HD(3,1b6800,1f44000,38ca680200000000,1,1)/EndEntire
This is on a board with single USB disk and single sd-card. The
UnknownMessaging(1d) node in the device-path is the MMC device,
but grub_efi_print_device_path() hasn't been updated yet for some
of the newer device-path sub-types.
This patch is inspired by a patch originally from Peter Jones, but
re-worked to use efi_device_path, so it doesn't much resemble the
original.
Signed-off-by: Rob Clark <robdclark@gmail.com>
---
lib/efi_loader/efi_disk.c | 54 +++++++++++++++++++++++++++--------------------
1 file changed, 31 insertions(+), 23 deletions(-)
diff --git a/lib/efi_loader/efi_disk.c b/lib/efi_loader/efi_disk.c
index ed06485e33..14f3e020c8 100644
--- a/lib/efi_loader/efi_disk.c
+++ b/lib/efi_loader/efi_disk.c
@@ -28,11 +28,13 @@ struct efi_disk_obj {
/* EFI Interface Media descriptor struct, referenced by ops */
struct efi_block_io_media media;
/* EFI device path to this block device */
- struct efi_device_path_file_path *dp;
+ struct efi_device_path *dp;
+ /* partition # */
+ unsigned part;
/* Offset into disk for simple partitions */
lbaint_t offset;
/* Internal block device */
- const struct blk_desc *desc;
+ struct blk_desc *desc;
};
static efi_status_t EFIAPI efi_disk_reset(struct efi_block_io *this,
@@ -172,26 +174,26 @@ static const struct efi_block_io block_io_disk_template = {
static void efi_disk_add_dev(const char *name,
const char *if_typename,
- const struct blk_desc *desc,
+ struct blk_desc *desc,
int dev_index,
- lbaint_t offset)
+ lbaint_t offset,
+ unsigned part)
{
struct efi_disk_obj *diskobj;
- struct efi_device_path_file_path *dp;
- int objlen = sizeof(*diskobj) + (sizeof(*dp) * 2);
/* Don't add empty devices */
if (!desc->lba)
return;
- diskobj = calloc(1, objlen);
+ diskobj = calloc(1, sizeof(*diskobj));
/* Fill in object data */
- dp = (void *)&diskobj[1];
+ diskobj->dp = efi_dp_from_part(desc, part);
+ diskobj->part = part;
diskobj->parent.protocols[0].guid = &efi_block_io_guid;
diskobj->parent.protocols[0].protocol_interface = &diskobj->ops;
diskobj->parent.protocols[1].guid = &efi_guid_device_path;
- diskobj->parent.protocols[1].protocol_interface = dp;
+ diskobj->parent.protocols[1].protocol_interface = diskobj->dp;
diskobj->parent.handle = diskobj;
diskobj->ops = block_io_disk_template;
diskobj->ifname = if_typename;
@@ -207,17 +209,6 @@ static void efi_disk_add_dev(const char *name,
diskobj->media.last_block = desc->lba - offset;
diskobj->ops.media = &diskobj->media;
- /* Fill in device path */
- diskobj->dp = dp;
- dp[0].dp.type = DEVICE_PATH_TYPE_MEDIA_DEVICE;
- dp[0].dp.sub_type = DEVICE_PATH_SUB_TYPE_FILE_PATH;
- dp[0].dp.length = sizeof(*dp);
- ascii2unicode(dp[0].str, name);
-
- dp[1].dp.type = DEVICE_PATH_TYPE_END;
- dp[1].dp.sub_type = DEVICE_PATH_SUB_TYPE_END;
- dp[1].dp.length = sizeof(*dp);
-
/* Hook up to the device list */
list_add_tail(&diskobj->parent.link, &efi_obj_list);
}
@@ -236,14 +227,18 @@ static int efi_disk_create_eltorito(struct blk_desc *desc,
if (desc->part_type != PART_TYPE_ISO)
return 0;
+ /* and devices for each partition: */
while (!part_get_info(desc, part, &info)) {
snprintf(devname, sizeof(devname), "%s:%d", pdevname,
part);
efi_disk_add_dev(devname, if_typename, desc, diskid,
- info.start);
+ info.start, part);
part++;
disks++;
}
+
+ /* ... and add block device: */
+ efi_disk_add_dev(devname, if_typename, desc, diskid, 0, 0);
#endif
return disks;
@@ -271,9 +266,22 @@ int efi_disk_register(void)
uclass_next_device_check(&dev)) {
struct blk_desc *desc = dev_get_uclass_platdata(dev);
const char *if_typename = dev->driver->name;
+ disk_partition_t info;
+ int part = 1;
printf("Scanning disk %s...\n", dev->name);
- efi_disk_add_dev(dev->name, if_typename, desc, desc->devnum, 0);
+
+ /* add devices for each partition: */
+ while (!part_get_info(desc, part, &info)) {
+ efi_disk_add_dev(dev->name, if_typename, desc,
+ desc->devnum, 0, part);
+ part++;
+ }
+
+ /* ... and add block device: */
+ efi_disk_add_dev(dev->name, if_typename, desc,
+ desc->devnum, 0, 0);
+
disks++;
/*
@@ -309,7 +317,7 @@ int efi_disk_register(void)
snprintf(devname, sizeof(devname), "%s%d",
if_typename, i);
- efi_disk_add_dev(devname, if_typename, desc, i, 0);
+ efi_disk_add_dev(devname, if_typename, desc, i, 0, 0);
disks++;
/*
--
2.13.5
^ permalink raw reply related [flat|nested] 72+ messages in thread* [U-Boot] [U-Boot, v3, 08/21] efi_loader: use proper device-paths for partitions
2017-09-13 22:05 ` [U-Boot] [PATCH v3 08/21] efi_loader: use proper device-paths for partitions Rob Clark
@ 2017-09-21 7:05 ` Alexander Graf
0 siblings, 0 replies; 72+ messages in thread
From: Alexander Graf @ 2017-09-21 7:05 UTC (permalink / raw)
To: u-boot
> Also, create disk objects for the disk itself, in addition to the
> partitions. (UEFI terminology is a bit confusing, a "disk" object is
> really a partition.) This helps grub properly identify the boot device
> since it is trying to match up partition "disk" object with it's parent
> device.
>
> Now instead of seeing devices like:
>
> /File(sdhci at 07864000.blk)/EndEntire
> /File(usb_mass_storage.lun0)/EndEntire
>
> You see:
>
> /ACPI(133741d0,0)/UnknownMessaging(1d)/EndEntire
> /ACPI(133741d0,0)/UnknownMessaging(1d)/HD(0,800,64000,dd904a8c00000000,1,1)/EndEntire
> /ACPI(133741d0,0)/UnknownMessaging(1d)/HD(1,64800,200000,dd904a8c00000000,1,1)/EndEntire
> /ACPI(133741d0,0)/UnknownMessaging(1d)/HD(2,264800,19a000,dd904a8c00000000,1,1)/EndEntire
> /ACPI(133741d0,0)/USB(0,0)/USB(0,0)/USB(0,0)/EndEntire
> /ACPI(133741d0,0)/USB(0,0)/USB(0,0)/USB(0,0)/HD(0,800,60000,38ca680200000000,1,1)/EndEntire
> /ACPI(133741d0,0)/USB(0,0)/USB(0,0)/USB(0,0)/HD(1,61000,155000,38ca680200000000,1,1)/EndEntire
> /ACPI(133741d0,0)/USB(0,0)/USB(0,0)/USB(0,0)/HD(2,20fa800,1bbf8800,38ca680200000000,1,1)/EndEntire
> /ACPI(133741d0,0)/USB(0,0)/USB(0,0)/USB(0,0)/HD(3,1b6800,1f44000,38ca680200000000,1,1)/EndEntire
>
> This is on a board with single USB disk and single sd-card. The
> UnknownMessaging(1d) node in the device-path is the MMC device,
> but grub_efi_print_device_path() hasn't been updated yet for some
> of the newer device-path sub-types.
>
> This patch is inspired by a patch originally from Peter Jones, but
> re-worked to use efi_device_path, so it doesn't much resemble the
> original.
>
> Signed-off-by: Rob Clark <robdclark@gmail.com>
Thanks, applied to efi-next
Alex
^ permalink raw reply [flat|nested] 72+ messages in thread
* [U-Boot] [PATCH v3 09/21] efi_loader: use proper device-paths for net
2017-09-13 22:05 [U-Boot] [PATCH v3 00/21] efi_loader: enough UEFI for standard distro boot Rob Clark
` (7 preceding siblings ...)
2017-09-13 22:05 ` [U-Boot] [PATCH v3 08/21] efi_loader: use proper device-paths for partitions Rob Clark
@ 2017-09-13 22:05 ` Rob Clark
2017-09-21 7:05 ` [U-Boot] [U-Boot, v3, " Alexander Graf
2017-09-13 22:05 ` [U-Boot] [PATCH v3 10/21] efi_loader: refactor boot device and loaded_image handling Rob Clark
` (12 subsequent siblings)
21 siblings, 1 reply; 72+ messages in thread
From: Rob Clark @ 2017-09-13 22:05 UTC (permalink / raw)
To: u-boot
Signed-off-by: Rob Clark <robdclark@gmail.com>
---
lib/efi_loader/efi_net.c | 19 ++-----------------
1 file changed, 2 insertions(+), 17 deletions(-)
diff --git a/lib/efi_loader/efi_net.c b/lib/efi_loader/efi_net.c
index 0b949d86e8..aa0618fd3a 100644
--- a/lib/efi_loader/efi_net.c
+++ b/lib/efi_loader/efi_net.c
@@ -26,9 +26,6 @@ struct efi_net_obj {
/* EFI Interface callback struct for network */
struct efi_simple_network net;
struct efi_simple_network_mode net_mode;
- /* Device path to the network adapter */
- struct efi_device_path_mac_addr dp_mac;
- struct efi_device_path_file_path dp_end;
/* PXE struct to transmit dhcp data */
struct efi_pxe pxe;
struct efi_pxe_mode pxe_mode;
@@ -213,16 +210,6 @@ void efi_net_set_dhcp_ack(void *pkt, int len)
int efi_net_register(void **handle)
{
struct efi_net_obj *netobj;
- struct efi_device_path_mac_addr dp_net = {
- .dp.type = DEVICE_PATH_TYPE_MESSAGING_DEVICE,
- .dp.sub_type = DEVICE_PATH_SUB_TYPE_MSG_MAC_ADDR,
- .dp.length = sizeof(dp_net),
- };
- struct efi_device_path_file_path dp_end = {
- .dp.type = DEVICE_PATH_TYPE_END,
- .dp.sub_type = DEVICE_PATH_SUB_TYPE_END,
- .dp.length = sizeof(dp_end),
- };
if (!eth_get_dev()) {
/* No eth device active, don't expose any */
@@ -236,7 +223,8 @@ int efi_net_register(void **handle)
netobj->parent.protocols[0].guid = &efi_net_guid;
netobj->parent.protocols[0].protocol_interface = &netobj->net;
netobj->parent.protocols[1].guid = &efi_guid_device_path;
- netobj->parent.protocols[1].protocol_interface = &netobj->dp_mac;
+ netobj->parent.protocols[1].protocol_interface =
+ efi_dp_from_eth();
netobj->parent.protocols[2].guid = &efi_pxe_guid;
netobj->parent.protocols[2].protocol_interface = &netobj->pxe;
netobj->parent.handle = &netobj->net;
@@ -255,9 +243,6 @@ int efi_net_register(void **handle)
netobj->net.receive = efi_net_receive;
netobj->net.mode = &netobj->net_mode;
netobj->net_mode.state = EFI_NETWORK_STARTED;
- netobj->dp_mac = dp_net;
- netobj->dp_end = dp_end;
- memcpy(netobj->dp_mac.mac.addr, eth_get_ethaddr(), 6);
memcpy(netobj->net_mode.current_address.mac_addr, eth_get_ethaddr(), 6);
netobj->net_mode.max_packet_size = PKTSIZE;
--
2.13.5
^ permalink raw reply related [flat|nested] 72+ messages in thread* [U-Boot] [PATCH v3 10/21] efi_loader: refactor boot device and loaded_image handling
2017-09-13 22:05 [U-Boot] [PATCH v3 00/21] efi_loader: enough UEFI for standard distro boot Rob Clark
` (8 preceding siblings ...)
2017-09-13 22:05 ` [U-Boot] [PATCH v3 09/21] efi_loader: use proper device-paths for net Rob Clark
@ 2017-09-13 22:05 ` Rob Clark
2017-09-21 7:05 ` [U-Boot] [U-Boot, v3, " Alexander Graf
2017-09-13 22:05 ` [U-Boot] [PATCH v3 11/21] efi_loader: add file/filesys support Rob Clark
` (11 subsequent siblings)
21 siblings, 1 reply; 72+ messages in thread
From: Rob Clark @ 2017-09-13 22:05 UTC (permalink / raw)
To: u-boot
Get rid of the hacky fake boot-device and duplicate device-path
constructing (which needs to match what efi_disk and efi_net do).
Instead convert over to use efi_device_path helpers to construct
device-paths, and use that to look up the actual boot device.
Also, extract out a helper to plug things in properly to the
loaded_image. In a following patch we'll want to re-use this in
efi_load_image() to handle the case of loading an image from a
file_path.
Signed-off-by: Rob Clark <robdclark@gmail.com>
---
cmd/bootefi.c | 201 +++++++++++++-----------------------------
include/efi_loader.h | 5 +-
lib/efi_loader/efi_boottime.c | 36 ++++++++
lib/efi_loader/efi_net.c | 5 +-
4 files changed, 100 insertions(+), 147 deletions(-)
diff --git a/cmd/bootefi.c b/cmd/bootefi.c
index 3196d86040..0980088668 100644
--- a/cmd/bootefi.c
+++ b/cmd/bootefi.c
@@ -22,97 +22,14 @@ DECLARE_GLOBAL_DATA_PTR;
static uint8_t efi_obj_list_initalized;
-/*
- * When booting using the "bootefi" command, we don't know which
- * physical device the file came from. So we create a pseudo-device
- * called "bootefi" with the device path /bootefi.
- *
- * In addition to the originating device we also declare the file path
- * of "bootefi" based loads to be /bootefi.
- */
-static struct efi_device_path_file_path bootefi_image_path[] = {
- {
- .dp.type = DEVICE_PATH_TYPE_MEDIA_DEVICE,
- .dp.sub_type = DEVICE_PATH_SUB_TYPE_FILE_PATH,
- .dp.length = sizeof(bootefi_image_path[0]),
- .str = { 'b','o','o','t','e','f','i' },
- }, {
- .dp.type = DEVICE_PATH_TYPE_END,
- .dp.sub_type = DEVICE_PATH_SUB_TYPE_END,
- .dp.length = sizeof(bootefi_image_path[0]),
- }
-};
-
-static struct efi_device_path_file_path bootefi_device_path[] = {
- {
- .dp.type = DEVICE_PATH_TYPE_MEDIA_DEVICE,
- .dp.sub_type = DEVICE_PATH_SUB_TYPE_FILE_PATH,
- .dp.length = sizeof(bootefi_image_path[0]),
- .str = { 'b','o','o','t','e','f','i' },
- }, {
- .dp.type = DEVICE_PATH_TYPE_END,
- .dp.sub_type = DEVICE_PATH_SUB_TYPE_END,
- .dp.length = sizeof(bootefi_image_path[0]),
- }
-};
-
-/* The EFI loaded_image interface for the image executed via "bootefi" */
-static struct efi_loaded_image loaded_image_info = {
- .device_handle = bootefi_device_path,
- .file_path = bootefi_image_path,
-};
-
-/* The EFI object struct for the image executed via "bootefi" */
-static struct efi_object loaded_image_info_obj = {
- .handle = &loaded_image_info,
- .protocols = {
- {
- /*
- * When asking for the loaded_image interface, just
- * return handle which points to loaded_image_info
- */
- .guid = &efi_guid_loaded_image,
- .protocol_interface = &loaded_image_info,
- },
- {
- /*
- * When asking for the device path interface, return
- * bootefi_device_path
- */
- .guid = &efi_guid_device_path,
- .protocol_interface = bootefi_device_path,
- },
- {
- .guid = &efi_guid_console_control,
- .protocol_interface = (void *) &efi_console_control
- },
- {
- .guid = &efi_guid_device_path_to_text_protocol,
- .protocol_interface = (void *) &efi_device_path_to_text
- },
- },
-};
-
-/* The EFI object struct for the device the "bootefi" image was loaded from */
-static struct efi_object bootefi_device_obj = {
- .handle = bootefi_device_path,
- .protocols = {
- {
- /* When asking for the device path interface, return
- * bootefi_device_path */
- .guid = &efi_guid_device_path,
- .protocol_interface = bootefi_device_path
- }
- },
-};
+static struct efi_device_path *bootefi_image_path;
+static struct efi_device_path *bootefi_device_path;
/* Initialize and populate EFI object list */
static void efi_init_obj_list(void)
{
efi_obj_list_initalized = 1;
- list_add_tail(&loaded_image_info_obj.link, &efi_obj_list);
- list_add_tail(&bootefi_device_obj.link, &efi_obj_list);
efi_console_register();
#ifdef CONFIG_PARTITIONS
efi_disk_register();
@@ -121,13 +38,7 @@ static void efi_init_obj_list(void)
efi_gop_register();
#endif
#ifdef CONFIG_NET
- void *nethandle = loaded_image_info.device_handle;
- efi_net_register(&nethandle);
-
- if (!memcmp(bootefi_device_path[0].str, "N\0e\0t", 6))
- loaded_image_info.device_handle = nethandle;
- else
- loaded_image_info.device_handle = bootefi_device_path;
+ efi_net_register();
#endif
#ifdef CONFIG_GENERATE_SMBIOS_TABLE
efi_smbios_register();
@@ -210,14 +121,27 @@ static unsigned long efi_run_in_el2(asmlinkage ulong (*entry)(
* Load an EFI payload into a newly allocated piece of memory, register all
* EFI objects it would want to access and jump to it.
*/
-static unsigned long do_bootefi_exec(void *efi, void *fdt)
+static unsigned long do_bootefi_exec(void *efi, void *fdt,
+ struct efi_device_path *device_path,
+ struct efi_device_path *image_path)
{
+ struct efi_loaded_image loaded_image_info = {};
+ struct efi_object loaded_image_info_obj = {};
+ ulong ret;
+
ulong (*entry)(void *image_handle, struct efi_system_table *st)
asmlinkage;
ulong fdt_pages, fdt_size, fdt_start, fdt_end;
const efi_guid_t fdt_guid = EFI_FDT_GUID;
bootm_headers_t img = { 0 };
+ /* Initialize and populate EFI object list */
+ if (!efi_obj_list_initalized)
+ efi_init_obj_list();
+
+ efi_setup_loaded_image(&loaded_image_info, &loaded_image_info_obj,
+ device_path, image_path);
+
/*
* gd lives in a fixed register which may get clobbered while we execute
* the payload. So save it here and restore it on every callback entry
@@ -252,18 +176,18 @@ static unsigned long do_bootefi_exec(void *efi, void *fdt)
/* Load the EFI payload */
entry = efi_load_pe(efi, &loaded_image_info);
- if (!entry)
- return -ENOENT;
-
- /* Initialize and populate EFI object list */
- if (!efi_obj_list_initalized)
- efi_init_obj_list();
+ if (!entry) {
+ ret = -ENOENT;
+ goto exit;
+ }
/* Call our payload! */
debug("%s:%d Jumping to 0x%lx\n", __func__, __LINE__, (long)entry);
if (setjmp(&loaded_image_info.exit_jmp)) {
- return loaded_image_info.exit_status;
+ ret = loaded_image_info.exit_status;
+ EFI_EXIT(ret);
+ goto exit;
}
#ifdef CONFIG_ARM64
@@ -282,7 +206,13 @@ static unsigned long do_bootefi_exec(void *efi, void *fdt)
}
#endif
- return efi_do_enter(&loaded_image_info, &systab, entry);
+ ret = efi_do_enter(&loaded_image_info, &systab, entry);
+
+exit:
+ /* image has returned, loaded-image obj goes *poof*: */
+ list_del(&loaded_image_info_obj.link);
+
+ return ret;
}
@@ -315,7 +245,8 @@ static int do_bootefi(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
}
printf("## Starting EFI application at %08lx ...\n", addr);
- r = do_bootefi_exec((void *)addr, (void*)fdt_addr);
+ r = do_bootefi_exec((void *)addr, (void *)fdt_addr,
+ bootefi_device_path, bootefi_image_path);
printf("## Application terminated, r = %lu\n",
r & ~EFI_ERROR_MASK);
@@ -344,58 +275,44 @@ U_BOOT_CMD(
bootefi_help_text
);
-void efi_set_bootdev(const char *dev, const char *devnr, const char *path)
+static int parse_partnum(const char *devnr)
{
- __maybe_unused struct blk_desc *desc;
- char devname[32] = { 0 }; /* dp->str is u16[32] long */
- char *colon, *s;
-
-#if defined(CONFIG_BLK) || CONFIG_IS_ENABLED(ISO_PARTITION)
- desc = blk_get_dev(dev, simple_strtol(devnr, NULL, 10));
-#endif
-
-#ifdef CONFIG_BLK
- if (desc) {
- snprintf(devname, sizeof(devname), "%s", desc->bdev->name);
- } else
-#endif
-
- {
- /* Assemble the condensed device name we use in efi_disk.c */
- snprintf(devname, sizeof(devname), "%s%s", dev, devnr);
+ const char *str = strchr(devnr, ':');
+ if (str) {
+ str++;
+ return simple_strtoul(str, NULL, 16);
}
+ return 0;
+}
- colon = strchr(devname, ':');
-
-#if CONFIG_IS_ENABLED(ISO_PARTITION)
- /* For ISOs we create partition block devices */
- if (desc && (desc->type != DEV_TYPE_UNKNOWN) &&
- (desc->part_type == PART_TYPE_ISO)) {
- if (!colon)
- snprintf(devname, sizeof(devname), "%s:1", devname);
+void efi_set_bootdev(const char *dev, const char *devnr, const char *path)
+{
+ char filename[32] = { 0 }; /* dp->str is u16[32] long */
+ char *s;
- colon = NULL;
- }
-#endif
+ if (strcmp(dev, "Net")) {
+ struct blk_desc *desc;
+ int part;
- if (colon)
- *colon = '\0';
+ desc = blk_get_dev(dev, simple_strtol(devnr, NULL, 10));
+ part = parse_partnum(devnr);
- /* Patch bootefi_device_path to the target device */
- memset(bootefi_device_path[0].str, 0, sizeof(bootefi_device_path[0].str));
- ascii2unicode(bootefi_device_path[0].str, devname);
+ bootefi_device_path = efi_dp_from_part(desc, part);
+ } else {
+#ifdef CONFIG_NET
+ bootefi_device_path = efi_dp_from_eth();
+#endif
+ }
- /* Patch bootefi_image_path to the target file path */
- memset(bootefi_image_path[0].str, 0, sizeof(bootefi_image_path[0].str));
if (strcmp(dev, "Net")) {
/* Add leading / to fs paths, because they're absolute */
- snprintf(devname, sizeof(devname), "/%s", path);
+ snprintf(filename, sizeof(filename), "/%s", path);
} else {
- snprintf(devname, sizeof(devname), "%s", path);
+ snprintf(filename, sizeof(filename), "%s", path);
}
/* DOS style file path: */
- s = devname;
+ s = filename;
while ((s = strchr(s, '/')))
*s++ = '\\';
- ascii2unicode(bootefi_image_path[0].str, devname);
+ bootefi_image_path = efi_dp_from_file(NULL, 0, filename);
}
diff --git a/include/efi_loader.h b/include/efi_loader.h
index f39c2ee6da..ec8803f588 100644
--- a/include/efi_loader.h
+++ b/include/efi_loader.h
@@ -136,7 +136,7 @@ int efi_disk_register(void);
/* Called by bootefi to make GOP (graphical) interface available */
int efi_gop_register(void);
/* Called by bootefi to make the network interface available */
-int efi_net_register(void **handle);
+int efi_net_register(void);
/* Called by bootefi to make SMBIOS tables available */
void efi_smbios_register(void);
@@ -193,6 +193,9 @@ uint64_t efi_add_memory_map(uint64_t start, uint64_t pages, int memory_type,
int efi_memory_init(void);
/* Adds new or overrides configuration table entry to the system table */
efi_status_t efi_install_configuration_table(const efi_guid_t *guid, void *table);
+void efi_setup_loaded_image(struct efi_loaded_image *info, struct efi_object *obj,
+ struct efi_device_path *device_path,
+ struct efi_device_path *file_path);
#ifdef CONFIG_EFI_LOADER_BOUNCE_BUFFER
extern void *efi_bounce_buffer;
diff --git a/lib/efi_loader/efi_boottime.c b/lib/efi_loader/efi_boottime.c
index b962b62a97..837e61d8fe 100644
--- a/lib/efi_loader/efi_boottime.c
+++ b/lib/efi_loader/efi_boottime.c
@@ -726,6 +726,42 @@ static efi_status_t EFIAPI efi_install_configuration_table_ext(efi_guid_t *guid,
return EFI_EXIT(efi_install_configuration_table(guid, table));
}
+/* Initialize a loaded_image_info + loaded_image_info object with correct
+ * protocols, boot-device, etc.
+ */
+void efi_setup_loaded_image(struct efi_loaded_image *info, struct efi_object *obj,
+ struct efi_device_path *device_path,
+ struct efi_device_path *file_path)
+{
+ obj->handle = info;
+
+ /*
+ * When asking for the device path interface, return
+ * bootefi_device_path
+ */
+ obj->protocols[0].guid = &efi_guid_device_path;
+ obj->protocols[0].protocol_interface = device_path;
+
+ /*
+ * When asking for the loaded_image interface, just
+ * return handle which points to loaded_image_info
+ */
+ obj->protocols[1].guid = &efi_guid_loaded_image;
+ obj->protocols[1].protocol_interface = info;
+
+ obj->protocols[2].guid = &efi_guid_console_control;
+ obj->protocols[2].protocol_interface = (void *)&efi_console_control;
+
+ obj->protocols[3].guid = &efi_guid_device_path_to_text_protocol;
+ obj->protocols[3].protocol_interface =
+ (void *)&efi_device_path_to_text;
+
+ info->file_path = file_path;
+ info->device_handle = efi_dp_find_obj(device_path, NULL);
+
+ list_add_tail(&obj->link, &efi_obj_list);
+}
+
static efi_status_t EFIAPI efi_load_image(bool boot_policy,
efi_handle_t parent_image,
struct efi_device_path *file_path,
diff --git a/lib/efi_loader/efi_net.c b/lib/efi_loader/efi_net.c
index aa0618fd3a..91f1e4a69e 100644
--- a/lib/efi_loader/efi_net.c
+++ b/lib/efi_loader/efi_net.c
@@ -207,7 +207,7 @@ void efi_net_set_dhcp_ack(void *pkt, int len)
}
/* This gets called from do_bootefi_exec(). */
-int efi_net_register(void **handle)
+int efi_net_register(void)
{
struct efi_net_obj *netobj;
@@ -253,8 +253,5 @@ int efi_net_register(void **handle)
/* Hook net up to the device list */
list_add_tail(&netobj->parent.link, &efi_obj_list);
- if (handle)
- *handle = &netobj->net;
-
return 0;
}
--
2.13.5
^ permalink raw reply related [flat|nested] 72+ messages in thread* [U-Boot] [U-Boot, v3, 10/21] efi_loader: refactor boot device and loaded_image handling
2017-09-13 22:05 ` [U-Boot] [PATCH v3 10/21] efi_loader: refactor boot device and loaded_image handling Rob Clark
@ 2017-09-21 7:05 ` Alexander Graf
0 siblings, 0 replies; 72+ messages in thread
From: Alexander Graf @ 2017-09-21 7:05 UTC (permalink / raw)
To: u-boot
> Get rid of the hacky fake boot-device and duplicate device-path
> constructing (which needs to match what efi_disk and efi_net do).
> Instead convert over to use efi_device_path helpers to construct
> device-paths, and use that to look up the actual boot device.
>
> Also, extract out a helper to plug things in properly to the
> loaded_image. In a following patch we'll want to re-use this in
> efi_load_image() to handle the case of loading an image from a
> file_path.
>
> Signed-off-by: Rob Clark <robdclark@gmail.com>
Thanks, applied to efi-next
Alex
^ permalink raw reply [flat|nested] 72+ messages in thread
* [U-Boot] [PATCH v3 11/21] efi_loader: add file/filesys support
2017-09-13 22:05 [U-Boot] [PATCH v3 00/21] efi_loader: enough UEFI for standard distro boot Rob Clark
` (9 preceding siblings ...)
2017-09-13 22:05 ` [U-Boot] [PATCH v3 10/21] efi_loader: refactor boot device and loaded_image handling Rob Clark
@ 2017-09-13 22:05 ` Rob Clark
2017-09-21 7:04 ` [U-Boot] [U-Boot, v3, " Alexander Graf
2017-09-13 22:05 ` [U-Boot] [PATCH v3 12/21] efi_loader: support load_image() from a file-path Rob Clark
` (10 subsequent siblings)
21 siblings, 1 reply; 72+ messages in thread
From: Rob Clark @ 2017-09-13 22:05 UTC (permalink / raw)
To: u-boot
fallback.efi (and probably other things) use UEFI's simple-file-system
protocol and file support to search for OS's to boot.
Signed-off-by: Rob Clark <robdclark@gmail.com>
---
include/efi.h | 2 +
include/efi_api.h | 65 +++++
include/efi_loader.h | 13 +
lib/efi_loader/Makefile | 1 +
lib/efi_loader/efi_disk.c | 32 +++
lib/efi_loader/efi_file.c | 560 ++++++++++++++++++++++++++++++++++++++
lib/efi_loader/efi_image_loader.c | 3 +
7 files changed, 676 insertions(+)
create mode 100644 lib/efi_loader/efi_file.c
diff --git a/include/efi.h b/include/efi.h
index 87b0b43f20..ddd2b96417 100644
--- a/include/efi.h
+++ b/include/efi.h
@@ -81,6 +81,8 @@ typedef struct {
#define EFI_IP_ADDRESS_CONFLICT (EFI_ERROR_MASK | 34)
#define EFI_HTTP_ERROR (EFI_ERROR_MASK | 35)
+#define EFI_WARN_DELETE_FAILURE 2
+
typedef unsigned long efi_status_t;
typedef u64 efi_physical_addr_t;
typedef u64 efi_virtual_addr_t;
diff --git a/include/efi_api.h b/include/efi_api.h
index 0c36122107..1aae96355f 100644
--- a/include/efi_api.h
+++ b/include/efi_api.h
@@ -666,4 +666,69 @@ struct efi_pxe {
struct efi_pxe_mode *mode;
};
+#define EFI_SIMPLE_FILE_SYSTEM_PROTOCOL_GUID \
+ EFI_GUID(0x964e5b22, 0x6459, 0x11d2, \
+ 0x8e, 0x39, 0x0, 0xa0, 0xc9, 0x69, 0x72, 0x3b)
+#define EFI_FILE_PROTOCOL_REVISION 0x00010000
+
+struct efi_file_handle {
+ u64 rev;
+ efi_status_t (EFIAPI *open)(struct efi_file_handle *file,
+ struct efi_file_handle **new_handle,
+ s16 *file_name, u64 open_mode, u64 attributes);
+ efi_status_t (EFIAPI *close)(struct efi_file_handle *file);
+ efi_status_t (EFIAPI *delete)(struct efi_file_handle *file);
+ efi_status_t (EFIAPI *read)(struct efi_file_handle *file,
+ u64 *buffer_size, void *buffer);
+ efi_status_t (EFIAPI *write)(struct efi_file_handle *file,
+ u64 *buffer_size, void *buffer);
+ efi_status_t (EFIAPI *getpos)(struct efi_file_handle *file,
+ u64 *pos);
+ efi_status_t (EFIAPI *setpos)(struct efi_file_handle *file,
+ u64 pos);
+ efi_status_t (EFIAPI *getinfo)(struct efi_file_handle *file,
+ efi_guid_t *info_type, u64 *buffer_size, void *buffer);
+ efi_status_t (EFIAPI *setinfo)(struct efi_file_handle *file,
+ efi_guid_t *info_type, u64 buffer_size, void *buffer);
+ efi_status_t (EFIAPI *flush)(struct efi_file_handle *file);
+};
+
+#define EFI_SIMPLE_FILE_SYSTEM_PROTOCOL_GUID \
+ EFI_GUID(0x964e5b22, 0x6459, 0x11d2, \
+ 0x8e, 0x39, 0x0, 0xa0, 0xc9, 0x69, 0x72, 0x3b)
+#define EFI_SIMPLE_FILE_SYSTEM_PROTOCOL_REVISION 0x00010000
+
+struct efi_simple_file_system_protocol {
+ u64 rev;
+ efi_status_t (EFIAPI *open_volume)(struct efi_simple_file_system_protocol *this,
+ struct efi_file_handle **root);
+};
+
+#define EFI_FILE_INFO_GUID \
+ EFI_GUID(0x9576e92, 0x6d3f, 0x11d2, \
+ 0x8e, 0x39, 0x0, 0xa0, 0xc9, 0x69, 0x72, 0x3b)
+
+#define EFI_FILE_MODE_READ 0x0000000000000001
+#define EFI_FILE_MODE_WRITE 0x0000000000000002
+#define EFI_FILE_MODE_CREATE 0x8000000000000000
+
+#define EFI_FILE_READ_ONLY 0x0000000000000001
+#define EFI_FILE_HIDDEN 0x0000000000000002
+#define EFI_FILE_SYSTEM 0x0000000000000004
+#define EFI_FILE_RESERVED 0x0000000000000008
+#define EFI_FILE_DIRECTORY 0x0000000000000010
+#define EFI_FILE_ARCHIVE 0x0000000000000020
+#define EFI_FILE_VALID_ATTR 0x0000000000000037
+
+struct efi_file_info {
+ u64 size;
+ u64 file_size;
+ u64 physical_size;
+ struct efi_time create_time;
+ struct efi_time last_access_time;
+ struct efi_time modification_time;
+ u64 attribute;
+ s16 file_name[0];
+};
+
#endif
diff --git a/include/efi_loader.h b/include/efi_loader.h
index ec8803f588..b0c1e8fb78 100644
--- a/include/efi_loader.h
+++ b/include/efi_loader.h
@@ -65,6 +65,8 @@ extern const efi_guid_t efi_guid_console_control;
extern const efi_guid_t efi_guid_device_path;
extern const efi_guid_t efi_guid_loaded_image;
extern const efi_guid_t efi_guid_device_path_to_text_protocol;
+extern const efi_guid_t efi_simple_file_system_protocol_guid;
+extern const efi_guid_t efi_file_info_guid;
extern unsigned int __efi_runtime_start, __efi_runtime_stop;
extern unsigned int __efi_runtime_rel_start, __efi_runtime_rel_stop;
@@ -140,6 +142,9 @@ int efi_net_register(void);
/* Called by bootefi to make SMBIOS tables available */
void efi_smbios_register(void);
+struct efi_simple_file_system_protocol *
+efi_fs_from_path(struct efi_device_path *fp);
+
/* Called by networking code to memorize the dhcp ack package */
void efi_net_set_dhcp_ack(void *pkt, int len);
@@ -168,6 +173,14 @@ efi_status_t efi_set_timer(struct efi_event *event, enum efi_timer_delay type,
/* Call this to signal an event */
void efi_signal_event(struct efi_event *event);
+/* open file system: */
+struct efi_simple_file_system_protocol *efi_simple_file_system(
+ struct blk_desc *desc, int part, struct efi_device_path *dp);
+
+/* open file from device-path: */
+struct efi_file_handle *efi_file_from_path(struct efi_device_path *fp);
+
+
/* Generic EFI memory allocator, call this to get memory */
void *efi_alloc(uint64_t len, int memory_type);
/* More specific EFI memory allocator, called by EFI payloads */
diff --git a/lib/efi_loader/Makefile b/lib/efi_loader/Makefile
index f35e5ce8a8..cce92cfeb5 100644
--- a/lib/efi_loader/Makefile
+++ b/lib/efi_loader/Makefile
@@ -16,6 +16,7 @@ always := $(efiprogs-y)
obj-$(CONFIG_CMD_BOOTEFI_HELLO) += helloworld_efi.o
obj-y += efi_image_loader.o efi_boottime.o efi_runtime.o efi_console.o
obj-y += efi_memory.o efi_device_path_to_text.o efi_device_path.o
+obj-y += efi_file.o
obj-$(CONFIG_LCD) += efi_gop.o
obj-$(CONFIG_DM_VIDEO) += efi_gop.o
obj-$(CONFIG_PARTITIONS) += efi_disk.o
diff --git a/lib/efi_loader/efi_disk.c b/lib/efi_loader/efi_disk.c
index 14f3e020c8..9805585eb1 100644
--- a/lib/efi_loader/efi_disk.c
+++ b/lib/efi_loader/efi_disk.c
@@ -31,6 +31,8 @@ struct efi_disk_obj {
struct efi_device_path *dp;
/* partition # */
unsigned part;
+ /* handle to filesys proto (for partition objects) */
+ struct efi_simple_file_system_protocol *volume;
/* Offset into disk for simple partitions */
lbaint_t offset;
/* Internal block device */
@@ -172,6 +174,28 @@ static const struct efi_block_io block_io_disk_template = {
.flush_blocks = &efi_disk_flush_blocks,
};
+/*
+ * Find filesystem from a device-path. The passed in path 'p' probably
+ * contains one or more /File(name) nodes, so the comparison stops at
+ * the first /File() node, and returns the pointer to that via 'rp'.
+ * This is mostly intended to be a helper to map a device-path to an
+ * efi_file_handle object.
+ */
+struct efi_simple_file_system_protocol *
+efi_fs_from_path(struct efi_device_path *fp)
+{
+ struct efi_object *efiobj;
+ struct efi_disk_obj *diskobj;
+
+ efiobj = efi_dp_find_obj(fp, NULL);
+ if (!efiobj)
+ return NULL;
+
+ diskobj = container_of(efiobj, struct efi_disk_obj, parent);
+
+ return diskobj->volume;
+}
+
static void efi_disk_add_dev(const char *name,
const char *if_typename,
struct blk_desc *desc,
@@ -194,6 +218,14 @@ static void efi_disk_add_dev(const char *name,
diskobj->parent.protocols[0].protocol_interface = &diskobj->ops;
diskobj->parent.protocols[1].guid = &efi_guid_device_path;
diskobj->parent.protocols[1].protocol_interface = diskobj->dp;
+ if (part >= 1) {
+ diskobj->volume = efi_simple_file_system(desc, part,
+ diskobj->dp);
+ diskobj->parent.protocols[2].guid =
+ &efi_simple_file_system_protocol_guid;
+ diskobj->parent.protocols[2].protocol_interface =
+ diskobj->volume;
+ }
diskobj->parent.handle = diskobj;
diskobj->ops = block_io_disk_template;
diskobj->ifname = if_typename;
diff --git a/lib/efi_loader/efi_file.c b/lib/efi_loader/efi_file.c
new file mode 100644
index 0000000000..5e1eee5a20
--- /dev/null
+++ b/lib/efi_loader/efi_file.c
@@ -0,0 +1,560 @@
+/*
+ * EFI utils
+ *
+ * Copyright (c) 2017 Rob Clark
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <charset.h>
+#include <efi_loader.h>
+#include <malloc.h>
+#include <fs.h>
+
+struct file_system {
+ struct efi_simple_file_system_protocol base;
+ struct efi_device_path *dp;
+ struct blk_desc *desc;
+ int part;
+};
+#define to_fs(x) container_of(x, struct file_system, base)
+
+struct file_handle {
+ struct efi_file_handle base;
+ struct file_system *fs;
+ loff_t offset; /* current file position/cursor */
+ int isdir;
+
+ /* for reading a directory: */
+ struct fs_dir_stream *dirs;
+ struct fs_dirent *dent;
+
+ char path[0];
+};
+#define to_fh(x) container_of(x, struct file_handle, base)
+
+static const struct efi_file_handle efi_file_handle_protocol;
+
+static char *basename(struct file_handle *fh)
+{
+ char *s = strrchr(fh->path, '/');
+ if (s)
+ return s + 1;
+ return fh->path;
+}
+
+static int set_blk_dev(struct file_handle *fh)
+{
+ return fs_set_blk_dev_with_part(fh->fs->desc, fh->fs->part);
+}
+
+static int is_dir(struct file_handle *fh)
+{
+ struct fs_dir_stream *dirs;
+
+ set_blk_dev(fh);
+ dirs = fs_opendir(fh->path);
+ if (!dirs)
+ return 0;
+
+ fs_closedir(dirs);
+
+ return 1;
+}
+
+/*
+ * Normalize a path which may include either back or fwd slashes,
+ * double slashes, . or .. entries in the path, etc.
+ */
+static int sanitize_path(char *path)
+{
+ char *p ;
+
+ /* backslash to slash: */
+ p = path;
+ while ((p = strchr(p, '\\')))
+ *p++ = '/';
+
+ /* handle double-slashes: */
+ p = path;
+ while ((p = strstr(p, "//"))) {
+ char *src = p + 1;
+ memmove(p, src, strlen(src) + 1);
+ }
+
+ /* handle extra /.'s */
+ p = path;
+ while ((p = strstr(p, "/."))) {
+ /*
+ * You'd be tempted to do this *after* handling ".."s
+ * below to avoid having to check if "/." is start of
+ * a "/..", but that won't have the correct results..
+ * for example, "/foo/./../bar" would get resolved to
+ * "/foo/bar" if you did these two passes in the other
+ * order
+ */
+ if (p[2] == '.') {
+ p += 2;
+ continue;
+ }
+ char *src = p + 2;
+ memmove(p, src, strlen(src) + 1);
+ }
+
+ /* handle extra /..'s: */
+ p = path;
+ while ((p = strstr(p, "/.."))) {
+ char *src = p + 3;
+
+ p--;
+
+ /* find beginning of previous path entry: */
+ while (true) {
+ if (p < path)
+ return -1;
+ if (*p == '/')
+ break;
+ p--;
+ }
+
+ memmove(p, src, strlen(src) + 1);
+ }
+
+ return 0;
+}
+
+/* NOTE: despite what you would expect, 'file_name' is actually a path.
+ * With windoze style backlashes, ofc.
+ */
+static struct efi_file_handle *file_open(struct file_system *fs,
+ struct file_handle *parent, s16 *file_name, u64 mode)
+{
+ struct file_handle *fh;
+ char f0[MAX_UTF8_PER_UTF16] = {0};
+ int plen = 0;
+ int flen = 0;
+
+ if (file_name) {
+ utf16_to_utf8((u8 *)f0, (u16 *)file_name, 1);
+ flen = utf16_strlen((u16 *)file_name);
+ }
+
+ /* we could have a parent, but also an absolute path: */
+ if (f0[0] == '\\') {
+ plen = 0;
+ } else if (parent) {
+ plen = strlen(parent->path) + 1;
+ }
+
+ /* +2 is for null and '/' */
+ fh = calloc(1, sizeof(*fh) + plen + (flen * MAX_UTF8_PER_UTF16) + 2);
+
+ fh->base = efi_file_handle_protocol;
+ fh->fs = fs;
+
+ if (parent) {
+ char *p = fh->path;
+
+ if (plen > 0) {
+ strcpy(p, parent->path);
+ p += plen - 1;
+ *p++ = '/';
+ }
+
+ utf16_to_utf8((u8 *)p, (u16 *)file_name, flen);
+
+ if (sanitize_path(fh->path))
+ goto error;
+
+ /* check if file exists: */
+ if (set_blk_dev(fh))
+ goto error;
+
+ if (!((mode & EFI_FILE_MODE_CREATE) || fs_exists(fh->path)))
+ goto error;
+
+ /* figure out if file is a directory: */
+ fh->isdir = is_dir(fh);
+ } else {
+ fh->isdir = 1;
+ strcpy(fh->path, "");
+ }
+
+ return &fh->base;
+
+error:
+ free(fh);
+ return NULL;
+}
+
+static efi_status_t EFIAPI efi_file_open(struct efi_file_handle *file,
+ struct efi_file_handle **new_handle,
+ s16 *file_name, u64 open_mode, u64 attributes)
+{
+ struct file_handle *fh = to_fh(file);
+
+ EFI_ENTRY("%p, %p, \"%ls\", %llx, %llu", file, new_handle, file_name,
+ open_mode, attributes);
+
+ *new_handle = file_open(fh->fs, fh, file_name, open_mode);
+ if (!*new_handle)
+ return EFI_EXIT(EFI_NOT_FOUND);
+
+ return EFI_EXIT(EFI_SUCCESS);
+}
+
+static efi_status_t file_close(struct file_handle *fh)
+{
+ fs_closedir(fh->dirs);
+ free(fh);
+ return EFI_SUCCESS;
+}
+
+static efi_status_t EFIAPI efi_file_close(struct efi_file_handle *file)
+{
+ struct file_handle *fh = to_fh(file);
+ EFI_ENTRY("%p", file);
+ return EFI_EXIT(file_close(fh));
+}
+
+static efi_status_t EFIAPI efi_file_delete(struct efi_file_handle *file)
+{
+ struct file_handle *fh = to_fh(file);
+ EFI_ENTRY("%p", file);
+ file_close(fh);
+ return EFI_EXIT(EFI_WARN_DELETE_FAILURE);
+}
+
+static efi_status_t file_read(struct file_handle *fh, u64 *buffer_size,
+ void *buffer)
+{
+ loff_t actread;
+
+ if (fs_read(fh->path, (ulong)buffer, fh->offset,
+ *buffer_size, &actread))
+ return EFI_DEVICE_ERROR;
+
+ *buffer_size = actread;
+ fh->offset += actread;
+
+ return EFI_SUCCESS;
+}
+
+static efi_status_t dir_read(struct file_handle *fh, u64 *buffer_size,
+ void *buffer)
+{
+ struct efi_file_info *info = buffer;
+ struct fs_dirent *dent;
+ unsigned required_size;
+
+ if (!fh->dirs) {
+ assert(fh->offset == 0);
+ fh->dirs = fs_opendir(fh->path);
+ if (!fh->dirs)
+ return EFI_DEVICE_ERROR;
+ }
+
+ /*
+ * So this is a bit awkward. Since fs layer is stateful and we
+ * can't rewind an entry, in the EFI_BUFFER_TOO_SMALL case below
+ * we might have to return without consuming the dent.. so we
+ * have to stash it for next call.
+ */
+ if (fh->dent) {
+ dent = fh->dent;
+ fh->dent = NULL;
+ } else {
+ dent = fs_readdir(fh->dirs);
+ }
+
+
+ if (!dent) {
+ /* no more files in directory: */
+ /* workaround shim.efi bug/quirk.. as find_boot_csv()
+ * loops through directory contents, it initially calls
+ * read w/ zero length buffer to find out how much mem
+ * to allocate for the EFI_FILE_INFO, then allocates,
+ * and then calls a 2nd time. If we return size of
+ * zero the first time, it happily passes that to
+ * AllocateZeroPool(), and when that returns NULL it
+ * thinks it is EFI_OUT_OF_RESOURCES. So on first
+ * call return a non-zero size:
+ */
+ if (*buffer_size == 0)
+ *buffer_size = sizeof(*info);
+ else
+ *buffer_size = 0;
+ return EFI_SUCCESS;
+ }
+
+ /* check buffer size: */
+ required_size = sizeof(*info) + 2 * (strlen(dent->name) + 1);
+ if (*buffer_size < required_size) {
+ *buffer_size = required_size;
+ fh->dent = dent;
+ return EFI_BUFFER_TOO_SMALL;
+ }
+
+ *buffer_size = required_size;
+ memset(info, 0, required_size);
+
+ info->size = required_size;
+ info->file_size = dent->size;
+ info->physical_size = dent->size;
+
+ if (dent->type == FS_DT_DIR)
+ info->attribute |= EFI_FILE_DIRECTORY;
+
+ ascii2unicode((u16 *)info->file_name, dent->name);
+
+ fh->offset++;
+
+ return EFI_SUCCESS;
+}
+
+static efi_status_t EFIAPI efi_file_read(struct efi_file_handle *file,
+ u64 *buffer_size, void *buffer)
+{
+ struct file_handle *fh = to_fh(file);
+ efi_status_t ret = EFI_SUCCESS;
+
+ EFI_ENTRY("%p, %p, %p", file, buffer_size, buffer);
+
+ if (set_blk_dev(fh)) {
+ ret = EFI_DEVICE_ERROR;
+ goto error;
+ }
+
+ if (fh->isdir)
+ ret = dir_read(fh, buffer_size, buffer);
+ else
+ ret = file_read(fh, buffer_size, buffer);
+
+error:
+ return EFI_EXIT(ret);
+}
+
+static efi_status_t EFIAPI efi_file_write(struct efi_file_handle *file,
+ u64 *buffer_size, void *buffer)
+{
+ struct file_handle *fh = to_fh(file);
+ efi_status_t ret = EFI_SUCCESS;
+ loff_t actwrite;
+
+ EFI_ENTRY("%p, %p, %p", file, buffer_size, buffer);
+
+ if (set_blk_dev(fh)) {
+ ret = EFI_DEVICE_ERROR;
+ goto error;
+ }
+
+ if (fs_write(fh->path, (ulong)buffer, fh->offset, *buffer_size,
+ &actwrite)) {
+ ret = EFI_DEVICE_ERROR;
+ goto error;
+ }
+
+ *buffer_size = actwrite;
+ fh->offset += actwrite;
+
+error:
+ return EFI_EXIT(ret);
+}
+
+static efi_status_t EFIAPI efi_file_getpos(struct efi_file_handle *file,
+ u64 *pos)
+{
+ struct file_handle *fh = to_fh(file);
+ EFI_ENTRY("%p, %p", file, pos);
+ *pos = fh->offset;
+ return EFI_EXIT(EFI_SUCCESS);
+}
+
+static efi_status_t EFIAPI efi_file_setpos(struct efi_file_handle *file,
+ u64 pos)
+{
+ struct file_handle *fh = to_fh(file);
+ efi_status_t ret = EFI_SUCCESS;
+
+ EFI_ENTRY("%p, %llu", file, pos);
+
+ if (fh->isdir) {
+ if (pos != 0) {
+ ret = EFI_UNSUPPORTED;
+ goto error;
+ }
+ fs_closedir(fh->dirs);
+ fh->dirs = NULL;
+ }
+
+ if (pos == ~0ULL) {
+ loff_t file_size;
+
+ if (set_blk_dev(fh)) {
+ ret = EFI_DEVICE_ERROR;
+ goto error;
+ }
+
+ if (fs_size(fh->path, &file_size)) {
+ ret = EFI_DEVICE_ERROR;
+ goto error;
+ }
+
+ pos = file_size;
+ }
+
+ fh->offset = pos;
+
+error:
+ return EFI_EXIT(ret);
+}
+
+static efi_status_t EFIAPI efi_file_getinfo(struct efi_file_handle *file,
+ efi_guid_t *info_type, u64 *buffer_size, void *buffer)
+{
+ struct file_handle *fh = to_fh(file);
+ efi_status_t ret = EFI_SUCCESS;
+
+ EFI_ENTRY("%p, %p, %p, %p", file, info_type, buffer_size, buffer);
+
+ if (!guidcmp(info_type, &efi_file_info_guid)) {
+ struct efi_file_info *info = buffer;
+ char *filename = basename(fh);
+ unsigned required_size;
+ loff_t file_size;
+
+ /* check buffer size: */
+ required_size = sizeof(*info) + 2 * (strlen(filename) + 1);
+ if (*buffer_size < required_size) {
+ *buffer_size = required_size;
+ ret = EFI_BUFFER_TOO_SMALL;
+ goto error;
+ }
+
+ if (set_blk_dev(fh)) {
+ ret = EFI_DEVICE_ERROR;
+ goto error;
+ }
+
+ if (fs_size(fh->path, &file_size)) {
+ ret = EFI_DEVICE_ERROR;
+ goto error;
+ }
+
+ memset(info, 0, required_size);
+
+ info->size = required_size;
+ info->file_size = file_size;
+ info->physical_size = file_size;
+
+ if (fh->isdir)
+ info->attribute |= EFI_FILE_DIRECTORY;
+
+ ascii2unicode((u16 *)info->file_name, filename);
+ } else {
+ ret = EFI_UNSUPPORTED;
+ }
+
+error:
+ return EFI_EXIT(ret);
+}
+
+static efi_status_t EFIAPI efi_file_setinfo(struct efi_file_handle *file,
+ efi_guid_t *info_type, u64 buffer_size, void *buffer)
+{
+ EFI_ENTRY("%p, %p, %llu, %p", file, info_type, buffer_size, buffer);
+ return EFI_EXIT(EFI_UNSUPPORTED);
+}
+
+static efi_status_t EFIAPI efi_file_flush(struct efi_file_handle *file)
+{
+ EFI_ENTRY("%p", file);
+ return EFI_EXIT(EFI_SUCCESS);
+}
+
+static const struct efi_file_handle efi_file_handle_protocol = {
+ .rev = EFI_FILE_PROTOCOL_REVISION,
+ .open = efi_file_open,
+ .close = efi_file_close,
+ .delete = efi_file_delete,
+ .read = efi_file_read,
+ .write = efi_file_write,
+ .getpos = efi_file_getpos,
+ .setpos = efi_file_setpos,
+ .getinfo = efi_file_getinfo,
+ .setinfo = efi_file_setinfo,
+ .flush = efi_file_flush,
+};
+
+struct efi_file_handle *efi_file_from_path(struct efi_device_path *fp)
+{
+ struct efi_simple_file_system_protocol *v;
+ struct efi_file_handle *f;
+ efi_status_t ret;
+
+ v = efi_fs_from_path(fp);
+ if (!v)
+ return NULL;
+
+ EFI_CALL(ret = v->open_volume(v, &f));
+ if (ret != EFI_SUCCESS)
+ return NULL;
+
+ /* skip over device-path nodes before the file path: */
+ while (fp && !EFI_DP_TYPE(fp, MEDIA_DEVICE, FILE_PATH))
+ fp = efi_dp_next(fp);
+
+ while (fp) {
+ struct efi_device_path_file_path *fdp =
+ container_of(fp, struct efi_device_path_file_path, dp);
+ struct efi_file_handle *f2;
+
+ if (!EFI_DP_TYPE(fp, MEDIA_DEVICE, FILE_PATH)) {
+ printf("bad file path!\n");
+ f->close(f);
+ return NULL;
+ }
+
+ EFI_CALL(ret = f->open(f, &f2, (s16 *)fdp->str,
+ EFI_FILE_MODE_READ, 0));
+ if (ret != EFI_SUCCESS)
+ return NULL;
+
+ fp = efi_dp_next(fp);
+
+ EFI_CALL(f->close(f));
+ f = f2;
+ }
+
+ return f;
+}
+
+static efi_status_t EFIAPI
+efi_open_volume(struct efi_simple_file_system_protocol *this,
+ struct efi_file_handle **root)
+{
+ struct file_system *fs = to_fs(this);
+
+ EFI_ENTRY("%p, %p", this, root);
+
+ *root = file_open(fs, NULL, NULL, 0);
+
+ return EFI_EXIT(EFI_SUCCESS);
+}
+
+struct efi_simple_file_system_protocol *
+efi_simple_file_system(struct blk_desc *desc, int part,
+ struct efi_device_path *dp)
+{
+ struct file_system *fs;
+
+ fs = calloc(1, sizeof(*fs));
+ fs->base.rev = EFI_SIMPLE_FILE_SYSTEM_PROTOCOL_REVISION;
+ fs->base.open_volume = efi_open_volume;
+ fs->desc = desc;
+ fs->part = part;
+ fs->dp = dp;
+
+ return &fs->base;
+}
diff --git a/lib/efi_loader/efi_image_loader.c b/lib/efi_loader/efi_image_loader.c
index f961407f50..469acae082 100644
--- a/lib/efi_loader/efi_image_loader.c
+++ b/lib/efi_loader/efi_image_loader.c
@@ -17,6 +17,9 @@ DECLARE_GLOBAL_DATA_PTR;
const efi_guid_t efi_guid_device_path = DEVICE_PATH_GUID;
const efi_guid_t efi_guid_loaded_image = LOADED_IMAGE_GUID;
+const efi_guid_t efi_simple_file_system_protocol_guid =
+ EFI_SIMPLE_FILE_SYSTEM_PROTOCOL_GUID;
+const efi_guid_t efi_file_info_guid = EFI_FILE_INFO_GUID;
static efi_status_t efi_loader_relocate(const IMAGE_BASE_RELOCATION *rel,
unsigned long rel_size, void *efi_reloc)
--
2.13.5
^ permalink raw reply related [flat|nested] 72+ messages in thread* [U-Boot] [PATCH v3 12/21] efi_loader: support load_image() from a file-path
2017-09-13 22:05 [U-Boot] [PATCH v3 00/21] efi_loader: enough UEFI for standard distro boot Rob Clark
` (10 preceding siblings ...)
2017-09-13 22:05 ` [U-Boot] [PATCH v3 11/21] efi_loader: add file/filesys support Rob Clark
@ 2017-09-13 22:05 ` Rob Clark
2017-09-21 7:04 ` [U-Boot] [U-Boot, v3, " Alexander Graf
2017-09-13 22:05 ` [U-Boot] [PATCH v3 13/21] efi_loader: make pool allocations cacheline aligned Rob Clark
` (9 subsequent siblings)
21 siblings, 1 reply; 72+ messages in thread
From: Rob Clark @ 2017-09-13 22:05 UTC (permalink / raw)
To: u-boot
Previously we only supported the case when the EFI application loaded
the image into memory for us. But fallback.efi does not do this.
Signed-off-by: Rob Clark <robdclark@gmail.com>
---
lib/efi_loader/efi_boottime.c | 85 +++++++++++++++++++++++++++++++++++--------
1 file changed, 70 insertions(+), 15 deletions(-)
diff --git a/lib/efi_loader/efi_boottime.c b/lib/efi_loader/efi_boottime.c
index 837e61d8fe..ec40f41bcb 100644
--- a/lib/efi_loader/efi_boottime.c
+++ b/lib/efi_loader/efi_boottime.c
@@ -762,6 +762,47 @@ void efi_setup_loaded_image(struct efi_loaded_image *info, struct efi_object *ob
list_add_tail(&obj->link, &efi_obj_list);
}
+static efi_status_t load_image_from_path(struct efi_device_path *file_path,
+ void **buffer)
+{
+ struct efi_file_info *info = NULL;
+ struct efi_file_handle *f;
+ static efi_status_t ret;
+ uint64_t bs;
+
+ f = efi_file_from_path(file_path);
+ if (!f)
+ return EFI_DEVICE_ERROR;
+
+ bs = 0;
+ EFI_CALL(ret = f->getinfo(f, (efi_guid_t *)&efi_file_info_guid,
+ &bs, info));
+ if (ret == EFI_BUFFER_TOO_SMALL) {
+ info = malloc(bs);
+ EFI_CALL(ret = f->getinfo(f, (efi_guid_t *)&efi_file_info_guid,
+ &bs, info));
+ }
+ if (ret != EFI_SUCCESS)
+ goto error;
+
+ ret = efi_allocate_pool(EFI_LOADER_DATA, info->file_size, buffer);
+ if (ret)
+ goto error;
+
+ EFI_CALL(ret = f->read(f, &info->file_size, *buffer));
+
+error:
+ free(info);
+ EFI_CALL(f->close(f));
+
+ if (ret != EFI_SUCCESS) {
+ efi_free_pool(*buffer);
+ *buffer = NULL;
+ }
+
+ return ret;
+}
+
static efi_status_t EFIAPI efi_load_image(bool boot_policy,
efi_handle_t parent_image,
struct efi_device_path *file_path,
@@ -769,25 +810,40 @@ static efi_status_t EFIAPI efi_load_image(bool boot_policy,
unsigned long source_size,
efi_handle_t *image_handle)
{
- static struct efi_object loaded_image_info_obj = {
- .protocols = {
- {
- .guid = &efi_guid_loaded_image,
- },
- },
- };
struct efi_loaded_image *info;
struct efi_object *obj;
EFI_ENTRY("%d, %p, %p, %p, %ld, %p", boot_policy, parent_image,
file_path, source_buffer, source_size, image_handle);
- info = malloc(sizeof(*info));
- loaded_image_info_obj.protocols[0].protocol_interface = info;
- obj = malloc(sizeof(loaded_image_info_obj));
- memset(info, 0, sizeof(*info));
- memcpy(obj, &loaded_image_info_obj, sizeof(loaded_image_info_obj));
- obj->handle = info;
- info->file_path = file_path;
+
+ info = calloc(1, sizeof(*info));
+ obj = calloc(1, sizeof(*obj));
+
+ if (!source_buffer) {
+ struct efi_device_path *dp, *fp;
+ efi_status_t ret;
+
+ ret = load_image_from_path(file_path, &source_buffer);
+ if (ret != EFI_SUCCESS) {
+ free(info);
+ free(obj);
+ return EFI_EXIT(ret);
+ }
+
+ /*
+ * split file_path which contains both the device and
+ * file parts:
+ */
+ efi_dp_split_file_path(file_path, &dp, &fp);
+
+ efi_setup_loaded_image(info, obj, dp, fp);
+ } else {
+ /* In this case, file_path is the "device" path, ie.
+ * something like a HARDWARE_DEVICE:MEMORY_MAPPED
+ */
+ efi_setup_loaded_image(info, obj, file_path, NULL);
+ }
+
info->reserved = efi_load_pe(source_buffer, info);
if (!info->reserved) {
free(info);
@@ -796,7 +852,6 @@ static efi_status_t EFIAPI efi_load_image(bool boot_policy,
}
*image_handle = info;
- list_add_tail(&obj->link, &efi_obj_list);
return EFI_EXIT(EFI_SUCCESS);
}
--
2.13.5
^ permalink raw reply related [flat|nested] 72+ messages in thread* [U-Boot] [PATCH v3 13/21] efi_loader: make pool allocations cacheline aligned
2017-09-13 22:05 [U-Boot] [PATCH v3 00/21] efi_loader: enough UEFI for standard distro boot Rob Clark
` (11 preceding siblings ...)
2017-09-13 22:05 ` [U-Boot] [PATCH v3 12/21] efi_loader: support load_image() from a file-path Rob Clark
@ 2017-09-13 22:05 ` Rob Clark
2017-09-21 7:05 ` [U-Boot] [U-Boot, v3, " Alexander Graf
2017-09-13 22:05 ` [U-Boot] [PATCH v3 14/21] efi_loader: efi variable support Rob Clark
` (8 subsequent siblings)
21 siblings, 1 reply; 72+ messages in thread
From: Rob Clark @ 2017-09-13 22:05 UTC (permalink / raw)
To: u-boot
This avoids printf() spam about file reads (such as loading an image)
into unaligned buffers (and the associated memcpy()). And generally
seems like a good idea.
Signed-off-by: Rob Clark <robdclark@gmail.com>
---
lib/efi_loader/efi_memory.c | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
diff --git a/lib/efi_loader/efi_memory.c b/lib/efi_loader/efi_memory.c
index 9e079f1fa3..1f0b9d0449 100644
--- a/lib/efi_loader/efi_memory.c
+++ b/lib/efi_loader/efi_memory.c
@@ -43,7 +43,7 @@ void *efi_bounce_buffer;
*/
struct efi_pool_allocation {
u64 num_pages;
- char data[];
+ char data[] __attribute__((aligned(ARCH_DMA_MINALIGN)));
};
/*
@@ -356,7 +356,8 @@ efi_status_t efi_allocate_pool(int pool_type, unsigned long size,
{
efi_status_t r;
efi_physical_addr_t t;
- u64 num_pages = (size + sizeof(u64) + EFI_PAGE_MASK) >> EFI_PAGE_SHIFT;
+ u64 num_pages = (size + sizeof(struct efi_pool_allocation) +
+ EFI_PAGE_MASK) >> EFI_PAGE_SHIFT;
if (size == 0) {
*buffer = NULL;
--
2.13.5
^ permalink raw reply related [flat|nested] 72+ messages in thread* [U-Boot] [PATCH v3 14/21] efi_loader: efi variable support
2017-09-13 22:05 [U-Boot] [PATCH v3 00/21] efi_loader: enough UEFI for standard distro boot Rob Clark
` (12 preceding siblings ...)
2017-09-13 22:05 ` [U-Boot] [PATCH v3 13/21] efi_loader: make pool allocations cacheline aligned Rob Clark
@ 2017-09-13 22:05 ` Rob Clark
2017-09-21 7:05 ` [U-Boot] [U-Boot,v3,14/21] " Alexander Graf
2017-10-19 20:40 ` [U-Boot] Unexpected saving of all environment variables during EFI boot Heinrich Schuchardt
2017-09-13 22:05 ` [U-Boot] [PATCH v3 15/21] efi_loader: add bootmgr Rob Clark
` (7 subsequent siblings)
21 siblings, 2 replies; 72+ messages in thread
From: Rob Clark @ 2017-09-13 22:05 UTC (permalink / raw)
To: u-boot
Add EFI variable support, mapping to u-boot environment variables.
Variables are pretty important for setting up boot order, among other
things. If the board supports saveenv, then it will be called in
ExitBootServices() to persist variables set by the efi payload. (For
example, fallback.efi configuring BootOrder and BootXXXX load-option
variables.)
Variables are *not* currently exposed at runtime, post ExitBootServices.
On boards without a dedicated device for storage, which the loaded OS
is not trying to also use, this is rather tricky. One idea, at least
for boards that can persist RAM across reboot, is to keep a "journal"
of modified variables in RAM, and then turn halt into a reboot into
u-boot, plus store variables, plus halt. Whatever the solution, it
likely involves some per-board support.
Mapping between EFI variables and u-boot variables:
efi_$guid_$varname = {attributes}(type)value
For example:
efi_8be4df61-93ca-11d2-aa0d-00e098032b8c_OsIndicationsSupported=
"{ro,boot,run}(blob)0000000000000000"
efi_8be4df61-93ca-11d2-aa0d-00e098032b8c_BootOrder=
"(blob)00010000"
The attributes are a comma separated list of these possible
attributes:
+ ro - read-only
+ boot - boot-services access
+ run - runtime access
NOTE: with current implementation, no variables are available after
ExitBootServices, and all are persisted (if possible).
If not specified, the attributes default to "{boot}".
The required type is one of:
+ utf8 - raw utf8 string
+ blob - arbitrary length hex string
Signed-off-by: Rob Clark <robdclark@gmail.com>
---
cmd/bootefi.c | 4 +
include/efi.h | 19 +++
include/efi_loader.h | 10 ++
lib/efi_loader/Makefile | 2 +-
lib/efi_loader/efi_boottime.c | 6 +
lib/efi_loader/efi_runtime.c | 17 ++-
lib/efi_loader/efi_variable.c | 335 ++++++++++++++++++++++++++++++++++++++++++
7 files changed, 388 insertions(+), 5 deletions(-)
create mode 100644 lib/efi_loader/efi_variable.c
diff --git a/cmd/bootefi.c b/cmd/bootefi.c
index 0980088668..d3ae33e25b 100644
--- a/cmd/bootefi.c
+++ b/cmd/bootefi.c
@@ -181,6 +181,10 @@ static unsigned long do_bootefi_exec(void *efi, void *fdt,
goto exit;
}
+ /* we don't support much: */
+ env_set("efi_8be4df61-93ca-11d2-aa0d-00e098032b8c_OsIndicationsSupported",
+ "{ro,boot}(blob)0000000000000000");
+
/* Call our payload! */
debug("%s:%d Jumping to 0x%lx\n", __func__, __LINE__, (long)entry);
diff --git a/include/efi.h b/include/efi.h
index ddd2b96417..04e83220b4 100644
--- a/include/efi.h
+++ b/include/efi.h
@@ -324,6 +324,25 @@ extern char image_base[];
/* Start and end of U-Boot image (for payload) */
extern char _binary_u_boot_bin_start[], _binary_u_boot_bin_end[];
+/*
+ * Variable Attributes
+ */
+#define EFI_VARIABLE_NON_VOLATILE 0x0000000000000001
+#define EFI_VARIABLE_BOOTSERVICE_ACCESS 0x0000000000000002
+#define EFI_VARIABLE_RUNTIME_ACCESS 0x0000000000000004
+#define EFI_VARIABLE_HARDWARE_ERROR_RECORD 0x0000000000000008
+#define EFI_VARIABLE_AUTHENTICATED_WRITE_ACCESS 0x0000000000000010
+#define EFI_VARIABLE_TIME_BASED_AUTHENTICATED_WRITE_ACCESS 0x0000000000000020
+#define EFI_VARIABLE_APPEND_WRITE 0x0000000000000040
+
+#define EFI_VARIABLE_MASK (EFI_VARIABLE_NON_VOLATILE | \
+ EFI_VARIABLE_BOOTSERVICE_ACCESS | \
+ EFI_VARIABLE_RUNTIME_ACCESS | \
+ EFI_VARIABLE_HARDWARE_ERROR_RECORD | \
+ EFI_VARIABLE_AUTHENTICATED_WRITE_ACCESS | \
+ EFI_VARIABLE_TIME_BASED_AUTHENTICATED_WRITE_ACCESS | \
+ EFI_VARIABLE_APPEND_WRITE)
+
/**
* efi_get_sys_table() - Get access to the main EFI system table
*
diff --git a/include/efi_loader.h b/include/efi_loader.h
index b0c1e8fb78..9eee62dc9c 100644
--- a/include/efi_loader.h
+++ b/include/efi_loader.h
@@ -277,6 +277,16 @@ efi_status_t __efi_runtime EFIAPI efi_get_time(
struct efi_time_cap *capabilities);
void efi_get_time_init(void);
+efi_status_t EFIAPI efi_get_variable(s16 *variable_name,
+ efi_guid_t *vendor, u32 *attributes,
+ unsigned long *data_size, void *data);
+efi_status_t EFIAPI efi_get_next_variable(
+ unsigned long *variable_name_size,
+ s16 *variable_name, efi_guid_t *vendor);
+efi_status_t EFIAPI efi_set_variable(s16 *variable_name,
+ efi_guid_t *vendor, u32 attributes,
+ unsigned long data_size, void *data);
+
#else /* defined(EFI_LOADER) && !defined(CONFIG_SPL_BUILD) */
/* Without CONFIG_EFI_LOADER we don't have a runtime section, stub it out */
diff --git a/lib/efi_loader/Makefile b/lib/efi_loader/Makefile
index cce92cfeb5..f58cb13337 100644
--- a/lib/efi_loader/Makefile
+++ b/lib/efi_loader/Makefile
@@ -16,7 +16,7 @@ always := $(efiprogs-y)
obj-$(CONFIG_CMD_BOOTEFI_HELLO) += helloworld_efi.o
obj-y += efi_image_loader.o efi_boottime.o efi_runtime.o efi_console.o
obj-y += efi_memory.o efi_device_path_to_text.o efi_device_path.o
-obj-y += efi_file.o
+obj-y += efi_file.o efi_variable.o
obj-$(CONFIG_LCD) += efi_gop.o
obj-$(CONFIG_DM_VIDEO) += efi_gop.o
obj-$(CONFIG_PARTITIONS) += efi_disk.o
diff --git a/lib/efi_loader/efi_boottime.c b/lib/efi_loader/efi_boottime.c
index ec40f41bcb..c406ff82ff 100644
--- a/lib/efi_loader/efi_boottime.c
+++ b/lib/efi_loader/efi_boottime.c
@@ -8,6 +8,7 @@
#include <common.h>
#include <efi_loader.h>
+#include <environment.h>
#include <malloc.h>
#include <asm/global_data.h>
#include <libfdt_env.h>
@@ -942,6 +943,11 @@ static efi_status_t EFIAPI efi_exit_boot_services(void *image_handle,
{
EFI_ENTRY("%p, %ld", image_handle, map_key);
+#if defined(CONFIG_CMD_SAVEENV) && !defined(CONFIG_ENV_IS_NOWHERE)
+ /* save any EFI variables that have been written: */
+ env_save();
+#endif
+
board_quiesce_devices();
/* Fix up caches for EFI payloads if necessary */
diff --git a/lib/efi_loader/efi_runtime.c b/lib/efi_loader/efi_runtime.c
index ad7f3754bd..2f95c766ac 100644
--- a/lib/efi_loader/efi_runtime.c
+++ b/lib/efi_loader/efi_runtime.c
@@ -184,7 +184,16 @@ static const struct efi_runtime_detach_list_struct efi_runtime_detach_list[] = {
/* Clean up system table */
.ptr = &systab.boottime,
.patchto = NULL,
- },
+ }, {
+ .ptr = &efi_runtime_services.get_variable,
+ .patchto = &efi_device_error,
+ }, {
+ .ptr = &efi_runtime_services.get_next_variable,
+ .patchto = &efi_device_error,
+ }, {
+ .ptr = &efi_runtime_services.set_variable,
+ .patchto = &efi_device_error,
+ }
};
static bool efi_runtime_tobedetached(void *p)
@@ -382,9 +391,9 @@ struct efi_runtime_services __efi_runtime_data efi_runtime_services = {
.set_wakeup_time = (void *)&efi_unimplemented,
.set_virtual_address_map = &efi_set_virtual_address_map,
.convert_pointer = (void *)&efi_invalid_parameter,
- .get_variable = (void *)&efi_device_error,
- .get_next_variable = (void *)&efi_device_error,
- .set_variable = (void *)&efi_device_error,
+ .get_variable = efi_get_variable,
+ .get_next_variable = efi_get_next_variable,
+ .set_variable = efi_set_variable,
.get_next_high_mono_count = (void *)&efi_device_error,
.reset_system = &efi_reset_system_boottime,
};
diff --git a/lib/efi_loader/efi_variable.c b/lib/efi_loader/efi_variable.c
new file mode 100644
index 0000000000..5569b3d3f0
--- /dev/null
+++ b/lib/efi_loader/efi_variable.c
@@ -0,0 +1,335 @@
+/*
+ * EFI utils
+ *
+ * Copyright (c) 2017 Rob Clark
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <malloc.h>
+#include <charset.h>
+#include <efi_loader.h>
+
+#define READ_ONLY BIT(31)
+
+/*
+ * Mapping between EFI variables and u-boot variables:
+ *
+ * efi_$guid_$varname = {attributes}(type)value
+ *
+ * For example:
+ *
+ * efi_8be4df61-93ca-11d2-aa0d-00e098032b8c_OsIndicationsSupported=
+ * "{ro,boot,run}(blob)0000000000000000"
+ * efi_8be4df61-93ca-11d2-aa0d-00e098032b8c_BootOrder=
+ * "(blob)00010000"
+ *
+ * The attributes are a comma separated list of these possible
+ * attributes:
+ *
+ * + ro - read-only
+ * + boot - boot-services access
+ * + run - runtime access
+ *
+ * NOTE: with current implementation, no variables are available after
+ * ExitBootServices, and all are persisted (if possible).
+ *
+ * If not specified, the attributes default to "{boot}".
+ *
+ * The required type is one of:
+ *
+ * + utf8 - raw utf8 string
+ * + blob - arbitrary length hex string
+ *
+ * Maybe a utf16 type would be useful to for a string value to be auto
+ * converted to utf16?
+ */
+
+#define MAX_VAR_NAME 31
+#define MAX_NATIVE_VAR_NAME \
+ (strlen("efi_xxxxxxxx-xxxx-xxxx-xxxxxxxxxxxxxxxx_") + \
+ (MAX_VAR_NAME * MAX_UTF8_PER_UTF16))
+
+static int hex(unsigned char ch)
+{
+ if (ch >= 'a' && ch <= 'f')
+ return ch-'a'+10;
+ if (ch >= '0' && ch <= '9')
+ return ch-'0';
+ if (ch >= 'A' && ch <= 'F')
+ return ch-'A'+10;
+ return -1;
+}
+
+static const char *hex2mem(u8 *mem, const char *hexstr, int count)
+{
+ memset(mem, 0, count/2);
+
+ do {
+ int nibble;
+
+ *mem = 0;
+
+ if (!count || !*hexstr)
+ break;
+
+ nibble = hex(*hexstr);
+ if (nibble < 0)
+ break;
+
+ *mem = nibble;
+ count--;
+ hexstr++;
+
+ if (!count || !*hexstr)
+ break;
+
+ nibble = hex(*hexstr);
+ if (nibble < 0)
+ break;
+
+ *mem = (*mem << 4) | nibble;
+ count--;
+ hexstr++;
+ mem++;
+
+ } while (1);
+
+ if (*hexstr)
+ return hexstr;
+
+ return NULL;
+}
+
+static char *mem2hex(char *hexstr, const u8 *mem, int count)
+{
+ static const char hexchars[] = "0123456789abcdef";
+
+ while (count-- > 0) {
+ u8 ch = *mem++;
+ *hexstr++ = hexchars[ch >> 4];
+ *hexstr++ = hexchars[ch & 0xf];
+ }
+
+ return hexstr;
+}
+
+static efi_status_t efi_to_native(char *native, s16 *variable_name,
+ efi_guid_t *vendor)
+{
+ size_t len;
+
+ len = utf16_strlen((u16 *)variable_name);
+ if (len >= MAX_VAR_NAME)
+ return EFI_DEVICE_ERROR;
+
+ native += sprintf(native, "efi_%pUl_", vendor);
+ native = (char *)utf16_to_utf8((u8 *)native, (u16 *)variable_name, len);
+ *native = '\0';
+
+ return EFI_SUCCESS;
+}
+
+static const char *prefix(const char *str, const char *prefix)
+{
+ size_t n = strlen(prefix);
+ if (!strncmp(prefix, str, n))
+ return str + n;
+ return NULL;
+}
+
+/* parse attributes part of variable value, if present: */
+static const char *parse_attr(const char *str, u32 *attrp)
+{
+ u32 attr = 0;
+ char sep = '{';
+
+ if (*str != '{') {
+ *attrp = EFI_VARIABLE_BOOTSERVICE_ACCESS;
+ return str;
+ }
+
+ while (*str == sep) {
+ const char *s;
+
+ str++;
+
+ if ((s = prefix(str, "ro"))) {
+ attr |= READ_ONLY;
+ } else if ((s = prefix(str, "boot"))) {
+ attr |= EFI_VARIABLE_BOOTSERVICE_ACCESS;
+ } else if ((s = prefix(str, "run"))) {
+ attr |= EFI_VARIABLE_RUNTIME_ACCESS;
+ } else {
+ printf("invalid attribute: %s\n", str);
+ break;
+ }
+
+ str = s;
+ sep = ',';
+ }
+
+ str++;
+
+ *attrp = attr;
+
+ return str;
+}
+
+/* http://wiki.phoenix.com/wiki/index.php/EFI_RUNTIME_SERVICES#GetVariable.28.29 */
+efi_status_t EFIAPI efi_get_variable(s16 *variable_name,
+ efi_guid_t *vendor, u32 *attributes,
+ unsigned long *data_size, void *data)
+{
+ char native_name[MAX_NATIVE_VAR_NAME + 1];
+ efi_status_t ret;
+ unsigned long in_size;
+ const char *val, *s;
+ u32 attr;
+
+ EFI_ENTRY("%p %p %p %p %p", variable_name, vendor, attributes,
+ data_size, data);
+
+ if (!variable_name || !vendor || !data_size)
+ return EFI_EXIT(EFI_INVALID_PARAMETER);
+
+ ret = efi_to_native(native_name, variable_name, vendor);
+ if (ret)
+ return EFI_EXIT(ret);
+
+ debug("%s: get '%s'\n", __func__, native_name);
+
+ val = env_get(native_name);
+ if (!val)
+ return EFI_EXIT(EFI_NOT_FOUND);
+
+ val = parse_attr(val, &attr);
+
+ in_size = *data_size;
+
+ if ((s = prefix(val, "(blob)"))) {
+ unsigned len = strlen(s);
+
+ /* two characters per byte: */
+ len = DIV_ROUND_UP(len, 2);
+ *data_size = len;
+
+ if (in_size < len)
+ return EFI_EXIT(EFI_BUFFER_TOO_SMALL);
+
+ if (!data)
+ return EFI_EXIT(EFI_INVALID_PARAMETER);
+
+ if (hex2mem(data, s, len * 2))
+ return EFI_EXIT(EFI_DEVICE_ERROR);
+
+ debug("%s: got value: \"%s\"\n", __func__, s);
+ } else if ((s = prefix(val, "(utf8)"))) {
+ unsigned len = strlen(s) + 1;
+
+ *data_size = len;
+
+ if (in_size < len)
+ return EFI_EXIT(EFI_BUFFER_TOO_SMALL);
+
+ if (!data)
+ return EFI_EXIT(EFI_INVALID_PARAMETER);
+
+ memcpy(data, s, len);
+ ((char *)data)[len] = '\0';
+
+ debug("%s: got value: \"%s\"\n", __func__, (char *)data);
+ } else {
+ debug("%s: invalid value: '%s'\n", __func__, val);
+ return EFI_EXIT(EFI_DEVICE_ERROR);
+ }
+
+ if (attributes)
+ *attributes = attr & EFI_VARIABLE_MASK;
+
+ return EFI_EXIT(EFI_SUCCESS);
+}
+
+/* http://wiki.phoenix.com/wiki/index.php/EFI_RUNTIME_SERVICES#GetNextVariableName.28.29 */
+efi_status_t EFIAPI efi_get_next_variable(
+ unsigned long *variable_name_size,
+ s16 *variable_name, efi_guid_t *vendor)
+{
+ EFI_ENTRY("%p %p %p", variable_name_size, variable_name, vendor);
+
+ return EFI_EXIT(EFI_DEVICE_ERROR);
+}
+
+/* http://wiki.phoenix.com/wiki/index.php/EFI_RUNTIME_SERVICES#SetVariable.28.29 */
+efi_status_t EFIAPI efi_set_variable(s16 *variable_name,
+ efi_guid_t *vendor, u32 attributes,
+ unsigned long data_size, void *data)
+{
+ char native_name[MAX_NATIVE_VAR_NAME + 1];
+ efi_status_t ret = EFI_SUCCESS;
+ char *val, *s;
+ u32 attr;
+
+ EFI_ENTRY("%p %p %x %lu %p", variable_name, vendor, attributes,
+ data_size, data);
+
+ if (!variable_name || !vendor)
+ return EFI_EXIT(EFI_INVALID_PARAMETER);
+
+ ret = efi_to_native(native_name, variable_name, vendor);
+ if (ret)
+ return EFI_EXIT(ret);
+
+#define ACCESS_ATTR (EFI_VARIABLE_RUNTIME_ACCESS | EFI_VARIABLE_BOOTSERVICE_ACCESS)
+
+ if ((data_size == 0) || !(attributes & ACCESS_ATTR)) {
+ /* delete the variable: */
+ env_set(native_name, NULL);
+ return EFI_EXIT(EFI_SUCCESS);
+ }
+
+ val = env_get(native_name);
+ if (val) {
+ parse_attr(val, &attr);
+
+ if (attr & READ_ONLY)
+ return EFI_EXIT(EFI_WRITE_PROTECTED);
+ }
+
+ val = malloc(2 * data_size + strlen("{ro,run,boot}(blob)") + 1);
+ if (!val)
+ return EFI_EXIT(EFI_OUT_OF_RESOURCES);
+
+ s = val;
+
+ /* store attributes: */
+ attributes &= (EFI_VARIABLE_BOOTSERVICE_ACCESS | EFI_VARIABLE_RUNTIME_ACCESS);
+ s += sprintf(s, "{");
+ while (attributes) {
+ u32 attr = 1 << (ffs(attributes) - 1);
+
+ if (attr == EFI_VARIABLE_BOOTSERVICE_ACCESS)
+ s += sprintf(s, "boot");
+ else if (attr == EFI_VARIABLE_RUNTIME_ACCESS)
+ s += sprintf(s, "run");
+
+ attributes &= ~attr;
+ if (attributes)
+ s += sprintf(s, ",");
+ }
+ s += sprintf(s, "}");
+
+ /* store payload: */
+ s += sprintf(s, "(blob)");
+ s = mem2hex(s, data, data_size);
+ *s = '\0';
+
+ debug("%s: setting: %s=%s\n", __func__, native_name, val);
+
+ if (env_set(native_name, val))
+ ret = EFI_DEVICE_ERROR;
+
+ free(val);
+
+ return EFI_EXIT(ret);
+}
--
2.13.5
^ permalink raw reply related [flat|nested] 72+ messages in thread* [U-Boot] [U-Boot,v3,14/21] efi_loader: efi variable support
2017-09-13 22:05 ` [U-Boot] [PATCH v3 14/21] efi_loader: efi variable support Rob Clark
@ 2017-09-21 7:05 ` Alexander Graf
2017-10-19 20:40 ` [U-Boot] Unexpected saving of all environment variables during EFI boot Heinrich Schuchardt
1 sibling, 0 replies; 72+ messages in thread
From: Alexander Graf @ 2017-09-21 7:05 UTC (permalink / raw)
To: u-boot
> Add EFI variable support, mapping to u-boot environment variables.
> Variables are pretty important for setting up boot order, among other
> things. If the board supports saveenv, then it will be called in
> ExitBootServices() to persist variables set by the efi payload. (For
> example, fallback.efi configuring BootOrder and BootXXXX load-option
> variables.)
>
> Variables are *not* currently exposed at runtime, post ExitBootServices.
> On boards without a dedicated device for storage, which the loaded OS
> is not trying to also use, this is rather tricky. One idea, at least
> for boards that can persist RAM across reboot, is to keep a "journal"
> of modified variables in RAM, and then turn halt into a reboot into
> u-boot, plus store variables, plus halt. Whatever the solution, it
> likely involves some per-board support.
>
> Mapping between EFI variables and u-boot variables:
>
> efi_$guid_$varname = {attributes}(type)value
>
> For example:
>
> efi_8be4df61-93ca-11d2-aa0d-00e098032b8c_OsIndicationsSupported=
> "{ro,boot,run}(blob)0000000000000000"
> efi_8be4df61-93ca-11d2-aa0d-00e098032b8c_BootOrder=
> "(blob)00010000"
>
> The attributes are a comma separated list of these possible
> attributes:
>
> + ro - read-only
> + boot - boot-services access
> + run - runtime access
>
> NOTE: with current implementation, no variables are available after
> ExitBootServices, and all are persisted (if possible).
>
> If not specified, the attributes default to "{boot}".
>
> The required type is one of:
>
> + utf8 - raw utf8 string
> + blob - arbitrary length hex string
>
> Signed-off-by: Rob Clark <robdclark@gmail.com>
Thanks, applied to efi-next
Alex
^ permalink raw reply [flat|nested] 72+ messages in thread* [U-Boot] Unexpected saving of all environment variables during EFI boot
2017-09-13 22:05 ` [U-Boot] [PATCH v3 14/21] efi_loader: efi variable support Rob Clark
2017-09-21 7:05 ` [U-Boot] [U-Boot,v3,14/21] " Alexander Graf
@ 2017-10-19 20:40 ` Heinrich Schuchardt
2017-10-19 21:05 ` Alexander Graf
1 sibling, 1 reply; 72+ messages in thread
From: Heinrich Schuchardt @ 2017-10-19 20:40 UTC (permalink / raw)
To: u-boot
This was merged as
ad644e7c18238026fecc647f62584d87d2c5b0a3
efi_loader: efi variable support
> diff --git a/lib/efi_loader/efi_boottime.c b/lib/efi_loader/efi_boottime.c
> index ec40f41bcb..c406ff82ff 100644
> --- a/lib/efi_loader/efi_boottime.c
> +++ b/lib/efi_loader/efi_boottime.c
> @@ -8,6 +8,7 @@
>
> #include <common.h>
> #include <efi_loader.h>
> +#include <environment.h>
> #include <malloc.h>
> #include <asm/global_data.h>
> #include <libfdt_env.h>
> @@ -942,6 +943,11 @@ static efi_status_t EFIAPI efi_exit_boot_services(void *image_handle,
> {
> EFI_ENTRY("%p, %ld", image_handle, map_key);
>
> +#if defined(CONFIG_CMD_SAVEENV) && !defined(CONFIG_ENV_IS_NOWHERE)
> + /* save any EFI variables that have been written: */
> + env_save();
You save all changed variables and not specifically those bound to EFI.
This is completely unexpected behavior for the user and not covered by
the commit message.
Furthermore you call env_save even if no EFI variable has been touched
at all.
This leads to writing to flash on every boot via EFI. Depending on
technology this might ruin the flash after a few hundred reboots.
Please, revert this part of the change.
Best regards
Heinrich Schuchardt
^ permalink raw reply [flat|nested] 72+ messages in thread* [U-Boot] Unexpected saving of all environment variables during EFI boot
2017-10-19 20:40 ` [U-Boot] Unexpected saving of all environment variables during EFI boot Heinrich Schuchardt
@ 2017-10-19 21:05 ` Alexander Graf
2017-10-19 21:15 ` Rob Clark
0 siblings, 1 reply; 72+ messages in thread
From: Alexander Graf @ 2017-10-19 21:05 UTC (permalink / raw)
To: u-boot
On 19.10.17 22:40, Heinrich Schuchardt wrote:
> This was merged as
> ad644e7c18238026fecc647f62584d87d2c5b0a3
> efi_loader: efi variable support
>
>> diff --git a/lib/efi_loader/efi_boottime.c b/lib/efi_loader/efi_boottime.c
>> index ec40f41bcb..c406ff82ff 100644
>> --- a/lib/efi_loader/efi_boottime.c
>> +++ b/lib/efi_loader/efi_boottime.c
>> @@ -8,6 +8,7 @@
>>
>> #include <common.h>
>> #include <efi_loader.h>
>> +#include <environment.h>
>> #include <malloc.h>
>> #include <asm/global_data.h>
>> #include <libfdt_env.h>
>> @@ -942,6 +943,11 @@ static efi_status_t EFIAPI efi_exit_boot_services(void *image_handle,
>> {
>> EFI_ENTRY("%p, %ld", image_handle, map_key);
>>
>> +#if defined(CONFIG_CMD_SAVEENV) && !defined(CONFIG_ENV_IS_NOWHERE)
>> + /* save any EFI variables that have been written: */
>> + env_save();
>
> You save all changed variables and not specifically those bound to EFI.
> This is completely unexpected behavior for the user and not covered by
> the commit message.
>
> Furthermore you call env_save even if no EFI variable has been touched
> at all.
>
> This leads to writing to flash on every boot via EFI. Depending on
> technology this might ruin the flash after a few hundred reboots.
I agree that overwriting flash on every boot isn't a terribly smart idea.
Also saving random environment variables that are set while we are in a
distro loop to persistent storage isn't great either.
I agree that we should probably improve this code to only save efi
variables.
Rob, how bad would it be for Fedora if we remove the persistent variable
store call (just the env_save() line) for 2017.11 to not kill people's
storage devices? Then for the next version tackle it for real and only
save efi variable changes here and only if anything really did change.
Alex
^ permalink raw reply [flat|nested] 72+ messages in thread* [U-Boot] Unexpected saving of all environment variables during EFI boot
2017-10-19 21:05 ` Alexander Graf
@ 2017-10-19 21:15 ` Rob Clark
2017-10-19 21:28 ` Alexander Graf
2017-10-19 22:15 ` [U-Boot] [PATCH 1/1] efi_loader: disable saving of EFI variables Heinrich Schuchardt
0 siblings, 2 replies; 72+ messages in thread
From: Rob Clark @ 2017-10-19 21:15 UTC (permalink / raw)
To: u-boot
On Thu, Oct 19, 2017 at 5:05 PM, Alexander Graf <agraf@suse.de> wrote:
>
>
> On 19.10.17 22:40, Heinrich Schuchardt wrote:
>> This was merged as
>> ad644e7c18238026fecc647f62584d87d2c5b0a3
>> efi_loader: efi variable support
>>
>>> diff --git a/lib/efi_loader/efi_boottime.c b/lib/efi_loader/efi_boottime.c
>>> index ec40f41bcb..c406ff82ff 100644
>>> --- a/lib/efi_loader/efi_boottime.c
>>> +++ b/lib/efi_loader/efi_boottime.c
>>> @@ -8,6 +8,7 @@
>>>
>>> #include <common.h>
>>> #include <efi_loader.h>
>>> +#include <environment.h>
>>> #include <malloc.h>
>>> #include <asm/global_data.h>
>>> #include <libfdt_env.h>
>>> @@ -942,6 +943,11 @@ static efi_status_t EFIAPI efi_exit_boot_services(void *image_handle,
>>> {
>>> EFI_ENTRY("%p, %ld", image_handle, map_key);
>>>
>>> +#if defined(CONFIG_CMD_SAVEENV) && !defined(CONFIG_ENV_IS_NOWHERE)
>>> + /* save any EFI variables that have been written: */
>>> + env_save();
>>
>> You save all changed variables and not specifically those bound to EFI.
>> This is completely unexpected behavior for the user and not covered by
>> the commit message.
>>
>> Furthermore you call env_save even if no EFI variable has been touched
>> at all.
>>
>> This leads to writing to flash on every boot via EFI. Depending on
>> technology this might ruin the flash after a few hundred reboots.
>
> I agree that overwriting flash on every boot isn't a terribly smart idea.
>
> Also saving random environment variables that are set while we are in a
> distro loop to persistent storage isn't great either.
>
> I agree that we should probably improve this code to only save efi
> variables.
>
> Rob, how bad would it be for Fedora if we remove the persistent variable
> store call (just the env_save() line) for 2017.11 to not kill people's
> storage devices? Then for the next version tackle it for real and only
> save efi variable changes here and only if anything really did change.
>
As I mentioned on #u-boot, I think we can just comment the
env_save().. or perhaps make it a config option. It will be mildly
annoying, since it means every boot is "first boot", ie. falling back
to fallback.efi to populate BootOrder/BootNNNN variables, and never
using bootmgr. But since we can't set EFI variables from userspace
yet, it isn't really a regression (yet).
Longer term, maybe we need to split out EFI variables from u-boot env
vars.. I thought it would be nice to store them together, since it
gives a convenient way to set EFI variables from script or cmdline.
But at least a subset of the EFI vars should be persisted to reach
EBBR, and if that breaks expectations about u-boot env vars, then I
guess we need to split them.
Side note, devices that can't repeatedly save env (even if we split
out the EFI variables to be stored separately) might be problematic
with EFI_LOADER. Maybe we need a build option they can set to have a
more crippled version of EFI_LOADER, so as to not penalize more
capable devices.
BR,
-R
^ permalink raw reply [flat|nested] 72+ messages in thread* [U-Boot] Unexpected saving of all environment variables during EFI boot
2017-10-19 21:15 ` Rob Clark
@ 2017-10-19 21:28 ` Alexander Graf
2017-10-19 22:25 ` Heinrich Schuchardt
2017-10-19 22:15 ` [U-Boot] [PATCH 1/1] efi_loader: disable saving of EFI variables Heinrich Schuchardt
1 sibling, 1 reply; 72+ messages in thread
From: Alexander Graf @ 2017-10-19 21:28 UTC (permalink / raw)
To: u-boot
On 19.10.17 23:15, Rob Clark wrote:
> On Thu, Oct 19, 2017 at 5:05 PM, Alexander Graf <agraf@suse.de> wrote:
>>
>>
>> On 19.10.17 22:40, Heinrich Schuchardt wrote:
>>> This was merged as
>>> ad644e7c18238026fecc647f62584d87d2c5b0a3
>>> efi_loader: efi variable support
>>>
>>>> diff --git a/lib/efi_loader/efi_boottime.c b/lib/efi_loader/efi_boottime.c
>>>> index ec40f41bcb..c406ff82ff 100644
>>>> --- a/lib/efi_loader/efi_boottime.c
>>>> +++ b/lib/efi_loader/efi_boottime.c
>>>> @@ -8,6 +8,7 @@
>>>>
>>>> #include <common.h>
>>>> #include <efi_loader.h>
>>>> +#include <environment.h>
>>>> #include <malloc.h>
>>>> #include <asm/global_data.h>
>>>> #include <libfdt_env.h>
>>>> @@ -942,6 +943,11 @@ static efi_status_t EFIAPI efi_exit_boot_services(void *image_handle,
>>>> {
>>>> EFI_ENTRY("%p, %ld", image_handle, map_key);
>>>>
>>>> +#if defined(CONFIG_CMD_SAVEENV) && !defined(CONFIG_ENV_IS_NOWHERE)
>>>> + /* save any EFI variables that have been written: */
>>>> + env_save();
>>>
>>> You save all changed variables and not specifically those bound to EFI.
>>> This is completely unexpected behavior for the user and not covered by
>>> the commit message.
>>>
>>> Furthermore you call env_save even if no EFI variable has been touched
>>> at all.
>>>
>>> This leads to writing to flash on every boot via EFI. Depending on
>>> technology this might ruin the flash after a few hundred reboots.
>>
>> I agree that overwriting flash on every boot isn't a terribly smart idea.
>>
>> Also saving random environment variables that are set while we are in a
>> distro loop to persistent storage isn't great either.
>>
>> I agree that we should probably improve this code to only save efi
>> variables.
>>
>> Rob, how bad would it be for Fedora if we remove the persistent variable
>> store call (just the env_save() line) for 2017.11 to not kill people's
>> storage devices? Then for the next version tackle it for real and only
>> save efi variable changes here and only if anything really did change.
>>
>
> As I mentioned on #u-boot, I think we can just comment the
> env_save().. or perhaps make it a config option. It will be mildly
> annoying, since it means every boot is "first boot", ie. falling back
> to fallback.efi to populate BootOrder/BootNNNN variables, and never
> using bootmgr. But since we can't set EFI variables from userspace
> yet, it isn't really a regression (yet).
Ok, I sent a patch to remove the env_save() line.
> Longer term, maybe we need to split out EFI variables from u-boot env
> vars.. I thought it would be nice to store them together, since it
> gives a convenient way to set EFI variables from script or cmdline.
> But at least a subset of the EFI vars should be persisted to reach
> EBBR, and if that breaks expectations about u-boot env vars, then I
> guess we need to split them.
I really like the sharing of the env space. We just need to have a
different write mechanism for EFI variables: Instead of writing the
current env, we could for example reread the original env, copy all
current efi variables into that and write it back?
>
> Side note, devices that can't repeatedly save env (even if we split
> out the EFI variables to be stored separately) might be problematic
> with EFI_LOADER. Maybe we need a build option they can set to have a
> more crippled version of EFI_LOADER, so as to not penalize more
> capable devices.
Every flash device self-destroys :).
Really, it boils down to the amount of saves. Writing to flash on every
boot is a pretty bad idea. If we simply only write when a variable write
actually occurred (which in most cases won't), then we should be ok on
all devices I think.
Alex
^ permalink raw reply [flat|nested] 72+ messages in thread* [U-Boot] Unexpected saving of all environment variables during EFI boot
2017-10-19 21:28 ` Alexander Graf
@ 2017-10-19 22:25 ` Heinrich Schuchardt
0 siblings, 0 replies; 72+ messages in thread
From: Heinrich Schuchardt @ 2017-10-19 22:25 UTC (permalink / raw)
To: u-boot
On 10/19/2017 11:28 PM, Alexander Graf wrote:
>
>
> On 19.10.17 23:15, Rob Clark wrote:
>> On Thu, Oct 19, 2017 at 5:05 PM, Alexander Graf <agraf@suse.de> wrote:
>>>
>>>
>>> On 19.10.17 22:40, Heinrich Schuchardt wrote:
>>>> This was merged as
>>>> ad644e7c18238026fecc647f62584d87d2c5b0a3
>>>> efi_loader: efi variable support
>>>>
>>>>> diff --git a/lib/efi_loader/efi_boottime.c b/lib/efi_loader/efi_boottime.c
>>>>> index ec40f41bcb..c406ff82ff 100644
>>>>> --- a/lib/efi_loader/efi_boottime.c
>>>>> +++ b/lib/efi_loader/efi_boottime.c
>>>>> @@ -8,6 +8,7 @@
>>>>>
>>>>> #include <common.h>
>>>>> #include <efi_loader.h>
>>>>> +#include <environment.h>
>>>>> #include <malloc.h>
>>>>> #include <asm/global_data.h>
>>>>> #include <libfdt_env.h>
>>>>> @@ -942,6 +943,11 @@ static efi_status_t EFIAPI efi_exit_boot_services(void *image_handle,
>>>>> {
>>>>> EFI_ENTRY("%p, %ld", image_handle, map_key);
>>>>>
>>>>> +#if defined(CONFIG_CMD_SAVEENV) && !defined(CONFIG_ENV_IS_NOWHERE)
>>>>> + /* save any EFI variables that have been written: */
>>>>> + env_save();
>>>>
>>>> You save all changed variables and not specifically those bound to EFI.
>>>> This is completely unexpected behavior for the user and not covered by
>>>> the commit message.
>>>>
>>>> Furthermore you call env_save even if no EFI variable has been touched
>>>> at all.
>>>>
>>>> This leads to writing to flash on every boot via EFI. Depending on
>>>> technology this might ruin the flash after a few hundred reboots.
>>>
>>> I agree that overwriting flash on every boot isn't a terribly smart idea.
>>>
>>> Also saving random environment variables that are set while we are in a
>>> distro loop to persistent storage isn't great either.
>>>
>>> I agree that we should probably improve this code to only save efi
>>> variables.
>>>
>>> Rob, how bad would it be for Fedora if we remove the persistent variable
>>> store call (just the env_save() line) for 2017.11 to not kill people's
>>> storage devices? Then for the next version tackle it for real and only
>>> save efi variable changes here and only if anything really did change.
>>>
>>
>> As I mentioned on #u-boot, I think we can just comment the
>> env_save().. or perhaps make it a config option. It will be mildly
>> annoying, since it means every boot is "first boot", ie. falling back
>> to fallback.efi to populate BootOrder/BootNNNN variables, and never
>> using bootmgr. But since we can't set EFI variables from userspace
>> yet, it isn't really a regression (yet).
>
> Ok, I sent a patch to remove the env_save() line.
Seems we worked in parallel :)
>
>> Longer term, maybe we need to split out EFI variables from u-boot env
>> vars.. I thought it would be nice to store them together, since it
>> gives a convenient way to set EFI variables from script or cmdline.
>> But at least a subset of the EFI vars should be persisted to reach
>> EBBR, and if that breaks expectations about u-boot env vars, then I
>> guess we need to split them.
>
> I really like the sharing of the env space. We just need to have a
> different write mechanism for EFI variables: Instead of writing the
> current env, we could for example reread the original env, copy all
> current efi variables into that and write it back?
That is why I said we have to add read and write methods in struct
env_driver.
>
>>
>> Side note, devices that can't repeatedly save env (even if we split
>> out the EFI variables to be stored separately) might be problematic
>> with EFI_LOADER. Maybe we need a build option they can set to have a
>> more crippled version of EFI_LOADER, so as to not penalize more
>> capable devices.
>
> Every flash device self-destroys :).
There are also env implementations in U-Boot writing to disk:
- env/ext4.c
- env/fat.c
>
> Really, it boils down to the amount of saves. Writing to flash on every
> boot is a pretty bad idea. If we simply only write when a variable write
> actually occurred (which in most cases won't), then we should be ok on
> all devices I think.
According to the UEFI standard we should save the monotonic counter on
every boot.
Regards
Heinrich
^ permalink raw reply [flat|nested] 72+ messages in thread
* [U-Boot] [PATCH 1/1] efi_loader: disable saving of EFI variables
2017-10-19 21:15 ` Rob Clark
2017-10-19 21:28 ` Alexander Graf
@ 2017-10-19 22:15 ` Heinrich Schuchardt
2017-10-22 14:37 ` Simon Glass
1 sibling, 1 reply; 72+ messages in thread
From: Heinrich Schuchardt @ 2017-10-19 22:15 UTC (permalink / raw)
To: u-boot
The current implementation of saving of EFI variables has
unwanted side effects:
- Writing to flash on every boot may harm the memory.
- All variables are saved. Not only the EFI ones.
- Variables are saved even if there is not change.
So let us disable saving for now until we have a complete
solution.
This will also mean every boot is "first boot", ie. falling back
to fallback.efi to populate BootOrder/BootNNNN variables, and
never using bootmgr.
Fixes: ad644e7c1823 efi_loader: efi variable support
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
---
lib/efi_loader/efi_boottime.c | 13 +++++++++++--
1 file changed, 11 insertions(+), 2 deletions(-)
diff --git a/lib/efi_loader/efi_boottime.c b/lib/efi_loader/efi_boottime.c
index f627340de4..a734d84d38 100644
--- a/lib/efi_loader/efi_boottime.c
+++ b/lib/efi_loader/efi_boottime.c
@@ -1440,8 +1440,17 @@ static efi_status_t EFIAPI efi_exit_boot_services(void *image_handle,
efi_tpl = TPL_HIGH_LEVEL;
#if defined(CONFIG_CMD_SAVEENV) && !defined(CONFIG_ENV_IS_NOWHERE)
- /* save any EFI variables that have been written: */
- env_save();
+ /*
+ * save any EFI variables that have been written:
+ *
+ * This feature is disabled due to the following deficiencies:
+ * Writing to flash on every boot may ruin the memory.
+ * We should not save non-EFI variables here.
+ * We should only save if an EFI variable has actually been
+ * changed.
+ *
+ * env_save();
+ */
#endif
board_quiesce_devices();
--
2.14.2
^ permalink raw reply related [flat|nested] 72+ messages in thread
* [U-Boot] [PATCH 1/1] efi_loader: disable saving of EFI variables
2017-10-19 22:15 ` [U-Boot] [PATCH 1/1] efi_loader: disable saving of EFI variables Heinrich Schuchardt
@ 2017-10-22 14:37 ` Simon Glass
0 siblings, 0 replies; 72+ messages in thread
From: Simon Glass @ 2017-10-22 14:37 UTC (permalink / raw)
To: u-boot
On 20 October 2017 at 00:15, Heinrich Schuchardt <xypron.glpk@gmx.de> wrote:
> The current implementation of saving of EFI variables has
> unwanted side effects:
>
> - Writing to flash on every boot may harm the memory.
> - All variables are saved. Not only the EFI ones.
> - Variables are saved even if there is not change.
>
> So let us disable saving for now until we have a complete
> solution.
>
> This will also mean every boot is "first boot", ie. falling back
> to fallback.efi to populate BootOrder/BootNNNN variables, and
> never using bootmgr.
>
> Fixes: ad644e7c1823 efi_loader: efi variable support
> Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
> ---
> lib/efi_loader/efi_boottime.c | 13 +++++++++++--
> 1 file changed, 11 insertions(+), 2 deletions(-)
Reviewed-by: Simon Glass <sjg@chromium.org>
^ permalink raw reply [flat|nested] 72+ messages in thread
* [U-Boot] [PATCH v3 15/21] efi_loader: add bootmgr
2017-09-13 22:05 [U-Boot] [PATCH v3 00/21] efi_loader: enough UEFI for standard distro boot Rob Clark
` (13 preceding siblings ...)
2017-09-13 22:05 ` [U-Boot] [PATCH v3 14/21] efi_loader: efi variable support Rob Clark
@ 2017-09-13 22:05 ` Rob Clark
2017-09-20 9:08 ` Alexander Graf
2017-09-21 7:05 ` [U-Boot] [U-Boot,v3,15/21] " Alexander Graf
2017-09-13 22:05 ` [U-Boot] [PATCH v3 16/21] efi_loader: file_path should be variable length Rob Clark
` (6 subsequent siblings)
21 siblings, 2 replies; 72+ messages in thread
From: Rob Clark @ 2017-09-13 22:05 UTC (permalink / raw)
To: u-boot
Similar to a "real" UEFI implementation, the bootmgr looks at the
BootOrder and BootXXXX variables to try to find an EFI payload to load
and boot. This is added as a sub-command of bootefi.
The idea is that the distro bootcmd would first try loading a payload
via the bootmgr, and then if that fails (ie. first boot or corrupted
EFI variables) it would fallback to loading bootaa64.efi. (Which
would then load fallback.efi which would look for \EFI\*\boot.csv and
populate BootOrder and BootXXXX based on what it found.)
Signed-off-by: Rob Clark <robdclark@gmail.com>
---
cmd/bootefi.c | 48 +++++++++-
include/config_distro_bootcmd.h | 5 ++
include/efi_api.h | 4 +
include/efi_loader.h | 6 ++
lib/efi_loader/Makefile | 2 +-
lib/efi_loader/efi_bootmgr.c | 180 ++++++++++++++++++++++++++++++++++++++
lib/efi_loader/efi_boottime.c | 6 +-
lib/efi_loader/efi_image_loader.c | 1 +
8 files changed, 246 insertions(+), 6 deletions(-)
create mode 100644 lib/efi_loader/efi_bootmgr.c
diff --git a/cmd/bootefi.c b/cmd/bootefi.c
index d3ae33e25b..fcd8dbafc1 100644
--- a/cmd/bootefi.c
+++ b/cmd/bootefi.c
@@ -219,6 +219,36 @@ exit:
return ret;
}
+static int do_bootefi_bootmgr_exec(unsigned long fdt_addr)
+{
+ struct efi_device_path *device_path, *file_path;
+ void *addr;
+ efi_status_t r;
+
+ /* Initialize and populate EFI object list */
+ if (!efi_obj_list_initalized)
+ efi_init_obj_list();
+
+ /*
+ * gd lives in a fixed register which may get clobbered while we execute
+ * the payload. So save it here and restore it on every callback entry
+ */
+ efi_save_gd();
+
+ addr = efi_bootmgr_load(&device_path, &file_path);
+ if (!addr)
+ return 1;
+
+ printf("## Starting EFI application at %p ...\n", addr);
+ r = do_bootefi_exec(addr, (void *)fdt_addr, device_path, file_path);
+ printf("## Application terminated, r = %lu\n",
+ r & ~EFI_ERROR_MASK);
+
+ if (r != EFI_SUCCESS)
+ return 1;
+
+ return 0;
+}
/* Interpreter command to boot an arbitrary EFI image from memory */
static int do_bootefi(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
@@ -237,7 +267,14 @@ static int do_bootefi(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
memcpy((char *)addr, __efi_hello_world_begin, size);
} else
#endif
- {
+ if (!strcmp(argv[1], "bootmgr")) {
+ unsigned long fdt_addr = 0;
+
+ if (argc > 2)
+ fdt_addr = simple_strtoul(argv[2], NULL, 16);
+
+ return do_bootefi_bootmgr_exec(fdt_addr);
+ } else {
saddr = argv[1];
addr = simple_strtoul(saddr, NULL, 16);
@@ -270,7 +307,11 @@ static char bootefi_help_text[] =
"hello\n"
" - boot a sample Hello World application stored within U-Boot"
#endif
- ;
+ "bootmgr [fdt addr]\n"
+ " - load and boot EFI payload based on BootOrder/BootXXXX variables.\n"
+ "\n"
+ " If specified, the device tree located at <fdt address> gets\n"
+ " exposed as EFI configuration table.\n";
#endif
U_BOOT_CMD(
@@ -308,6 +349,9 @@ void efi_set_bootdev(const char *dev, const char *devnr, const char *path)
#endif
}
+ if (!path)
+ return;
+
if (strcmp(dev, "Net")) {
/* Add leading / to fs paths, because they're absolute */
snprintf(filename, sizeof(filename), "/%s", path);
diff --git a/include/config_distro_bootcmd.h b/include/config_distro_bootcmd.h
index 9ed6b9892c..e0d0034ed3 100644
--- a/include/config_distro_bootcmd.h
+++ b/include/config_distro_bootcmd.h
@@ -112,6 +112,11 @@
#define BOOTENV_SHARED_EFI \
"boot_efi_binary=" \
+ "if fdt addr ${fdt_addr_r}; then " \
+ "bootefi bootmgr ${fdt_addr_r};" \
+ "else " \
+ "bootefi bootmgr ${fdtcontroladdr};" \
+ "fi;" \
"load ${devtype} ${devnum}:${distro_bootpart} " \
"${kernel_addr_r} efi/boot/"BOOTEFI_NAME"; " \
"if fdt addr ${fdt_addr_r}; then " \
diff --git a/include/efi_api.h b/include/efi_api.h
index 1aae96355f..d0aefa8221 100644
--- a/include/efi_api.h
+++ b/include/efi_api.h
@@ -211,6 +211,10 @@ struct efi_runtime_services {
EFI_GUID(0x00000000, 0x0000, 0x0000, 0x00, 0x00, \
0x00, 0x00, 0x00, 0x00, 0x00, 0x00)
+#define EFI_GLOBAL_VARIABLE_GUID \
+ EFI_GUID(0x8be4df61, 0x93ca, 0x11d2, 0xaa, 0x0d, \
+ 0x00, 0xe0, 0x98, 0x03, 0x2b, 0x8c)
+
#define LOADED_IMAGE_PROTOCOL_GUID \
EFI_GUID(0x5b1b31a1, 0x9562, 0x11d2, 0x8e, 0x3f, \
0x00, 0xa0, 0xc9, 0x69, 0x72, 0x3b)
diff --git a/include/efi_loader.h b/include/efi_loader.h
index 9eee62dc9c..adc0bcf609 100644
--- a/include/efi_loader.h
+++ b/include/efi_loader.h
@@ -61,6 +61,7 @@ extern const struct efi_device_path_to_text_protocol efi_device_path_to_text;
uint16_t *efi_dp_str(struct efi_device_path *dp);
+extern const efi_guid_t efi_global_variable_guid;
extern const efi_guid_t efi_guid_console_control;
extern const efi_guid_t efi_guid_device_path;
extern const efi_guid_t efi_guid_loaded_image;
@@ -209,6 +210,8 @@ efi_status_t efi_install_configuration_table(const efi_guid_t *guid, void *table
void efi_setup_loaded_image(struct efi_loaded_image *info, struct efi_object *obj,
struct efi_device_path *device_path,
struct efi_device_path *file_path);
+efi_status_t efi_load_image_from_path(struct efi_device_path *file_path,
+ void **buffer);
#ifdef CONFIG_EFI_LOADER_BOUNCE_BUFFER
extern void *efi_bounce_buffer;
@@ -287,6 +290,9 @@ efi_status_t EFIAPI efi_set_variable(s16 *variable_name,
efi_guid_t *vendor, u32 attributes,
unsigned long data_size, void *data);
+void *efi_bootmgr_load(struct efi_device_path **device_path,
+ struct efi_device_path **file_path);
+
#else /* defined(EFI_LOADER) && !defined(CONFIG_SPL_BUILD) */
/* Without CONFIG_EFI_LOADER we don't have a runtime section, stub it out */
diff --git a/lib/efi_loader/Makefile b/lib/efi_loader/Makefile
index f58cb13337..930c0e218e 100644
--- a/lib/efi_loader/Makefile
+++ b/lib/efi_loader/Makefile
@@ -16,7 +16,7 @@ always := $(efiprogs-y)
obj-$(CONFIG_CMD_BOOTEFI_HELLO) += helloworld_efi.o
obj-y += efi_image_loader.o efi_boottime.o efi_runtime.o efi_console.o
obj-y += efi_memory.o efi_device_path_to_text.o efi_device_path.o
-obj-y += efi_file.o efi_variable.o
+obj-y += efi_file.o efi_variable.o efi_bootmgr.o
obj-$(CONFIG_LCD) += efi_gop.o
obj-$(CONFIG_DM_VIDEO) += efi_gop.o
obj-$(CONFIG_PARTITIONS) += efi_disk.o
diff --git a/lib/efi_loader/efi_bootmgr.c b/lib/efi_loader/efi_bootmgr.c
new file mode 100644
index 0000000000..857d88a879
--- /dev/null
+++ b/lib/efi_loader/efi_bootmgr.c
@@ -0,0 +1,180 @@
+/*
+ * EFI utils
+ *
+ * Copyright (c) 2017 Rob Clark
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <charset.h>
+#include <malloc.h>
+#include <efi_loader.h>
+
+static const struct efi_boot_services *bs;
+static const struct efi_runtime_services *rs;
+
+#define LOAD_OPTION_ACTIVE 0x00000001
+#define LOAD_OPTION_FORCE_RECONNECT 0x00000002
+#define LOAD_OPTION_HIDDEN 0x00000008
+
+/*
+ * bootmgr implements the logic of trying to find a payload to boot
+ * based on the BootOrder + BootXXXX variables, and then loading it.
+ *
+ * TODO detecting a special key held (f9?) and displaying a boot menu
+ * like you would get on a PC would be clever.
+ *
+ * TODO if we had a way to write and persist variables after the OS
+ * has started, we'd also want to check OsIndications to see if we
+ * should do normal or recovery boot.
+ */
+
+
+/*
+ * See section 3.1.3 in the v2.7 UEFI spec for more details on
+ * the layout of EFI_LOAD_OPTION. In short it is:
+ *
+ * typedef struct _EFI_LOAD_OPTION {
+ * UINT32 Attributes;
+ * UINT16 FilePathListLength;
+ * // CHAR16 Description[]; <-- variable length, NULL terminated
+ * // EFI_DEVICE_PATH_PROTOCOL FilePathList[]; <-- FilePathListLength bytes
+ * // UINT8 OptionalData[];
+ * } EFI_LOAD_OPTION;
+ */
+struct load_option {
+ u32 attributes;
+ u16 file_path_length;
+ u16 *label;
+ struct efi_device_path *file_path;
+ u8 *optional_data;
+};
+
+/* parse an EFI_LOAD_OPTION, as described above */
+static void parse_load_option(struct load_option *lo, void *ptr)
+{
+ lo->attributes = *(u32 *)ptr;
+ ptr += sizeof(u32);
+
+ lo->file_path_length = *(u16 *)ptr;
+ ptr += sizeof(u16);
+
+ lo->label = ptr;
+ ptr += (utf16_strlen(lo->label) + 1) * 2;
+
+ lo->file_path = ptr;
+ ptr += lo->file_path_length;
+
+ lo->optional_data = ptr;
+}
+
+/* free() the result */
+static void *get_var(u16 *name, const efi_guid_t *vendor,
+ unsigned long *size)
+{
+ efi_guid_t *v = (efi_guid_t *)vendor;
+ efi_status_t ret;
+ void *buf = NULL;
+
+ *size = 0;
+ EFI_CALL(ret = rs->get_variable((s16 *)name, v, NULL, size, buf));
+ if (ret == EFI_BUFFER_TOO_SMALL) {
+ buf = malloc(*size);
+ EFI_CALL(ret = rs->get_variable((s16 *)name, v, NULL, size, buf));
+ }
+
+ if (ret != EFI_SUCCESS) {
+ free(buf);
+ *size = 0;
+ return NULL;
+ }
+
+ return buf;
+}
+
+/*
+ * Attempt to load load-option number 'n', returning device_path and file_path
+ * if successful. This checks that the EFI_LOAD_OPTION is active (enabled)
+ * and that the specified file to boot exists.
+ */
+static void *try_load_entry(uint16_t n, struct efi_device_path **device_path,
+ struct efi_device_path **file_path)
+{
+ struct load_option lo;
+ u16 varname[] = L"Boot0000";
+ u16 hexmap[] = L"0123456789ABCDEF";
+ void *load_option, *image = NULL;
+ unsigned long size;
+
+ varname[4] = hexmap[(n & 0xf000) >> 12];
+ varname[5] = hexmap[(n & 0x0f00) >> 8];
+ varname[6] = hexmap[(n & 0x00f0) >> 4];
+ varname[7] = hexmap[(n & 0x000f) >> 0];
+
+ load_option = get_var(varname, &efi_global_variable_guid, &size);
+ if (!load_option)
+ return NULL;
+
+ parse_load_option(&lo, load_option);
+
+ if (lo.attributes & LOAD_OPTION_ACTIVE) {
+ efi_status_t ret;
+ u16 *str = NULL;
+
+ debug("%s: trying to load \"%ls\" from: %ls\n", __func__,
+ lo.label, (str = efi_dp_str(lo.file_path)));
+ efi_free_pool(str);
+
+ ret = efi_load_image_from_path(lo.file_path, &image);
+
+ if (ret != EFI_SUCCESS)
+ goto error;
+
+ printf("Booting: %ls\n", lo.label);
+ efi_dp_split_file_path(lo.file_path, device_path, file_path);
+ }
+
+error:
+ free(load_option);
+
+ return image;
+}
+
+/*
+ * Attempt to load, in the order specified by BootOrder EFI variable, the
+ * available load-options, finding and returning the first one that can
+ * be loaded successfully.
+ */
+void *efi_bootmgr_load(struct efi_device_path **device_path,
+ struct efi_device_path **file_path)
+{
+ uint16_t *bootorder;
+ unsigned long size;
+ void *image = NULL;
+ int i, num;
+
+ __efi_entry_check();
+
+ bs = systab.boottime;
+ rs = systab.runtime;
+
+ bootorder = get_var(L"BootOrder", &efi_global_variable_guid, &size);
+ if (!bootorder)
+ goto error;
+
+ num = size / sizeof(uint16_t);
+ for (i = 0; i < num; i++) {
+ debug("%s: trying to load Boot%04X\n", __func__, bootorder[i]);
+ image = try_load_entry(bootorder[i], device_path, file_path);
+ if (image)
+ break;
+ }
+
+ free(bootorder);
+
+error:
+ __efi_exit_check();
+
+ return image;
+}
diff --git a/lib/efi_loader/efi_boottime.c b/lib/efi_loader/efi_boottime.c
index c406ff82ff..cea242cd49 100644
--- a/lib/efi_loader/efi_boottime.c
+++ b/lib/efi_loader/efi_boottime.c
@@ -763,8 +763,8 @@ void efi_setup_loaded_image(struct efi_loaded_image *info, struct efi_object *ob
list_add_tail(&obj->link, &efi_obj_list);
}
-static efi_status_t load_image_from_path(struct efi_device_path *file_path,
- void **buffer)
+efi_status_t efi_load_image_from_path(struct efi_device_path *file_path,
+ void **buffer)
{
struct efi_file_info *info = NULL;
struct efi_file_handle *f;
@@ -824,7 +824,7 @@ static efi_status_t EFIAPI efi_load_image(bool boot_policy,
struct efi_device_path *dp, *fp;
efi_status_t ret;
- ret = load_image_from_path(file_path, &source_buffer);
+ ret = efi_load_image_from_path(file_path, &source_buffer);
if (ret != EFI_SUCCESS) {
free(info);
free(obj);
diff --git a/lib/efi_loader/efi_image_loader.c b/lib/efi_loader/efi_image_loader.c
index 469acae082..242e6a504b 100644
--- a/lib/efi_loader/efi_image_loader.c
+++ b/lib/efi_loader/efi_image_loader.c
@@ -15,6 +15,7 @@
DECLARE_GLOBAL_DATA_PTR;
+const efi_guid_t efi_global_variable_guid = EFI_GLOBAL_VARIABLE_GUID;
const efi_guid_t efi_guid_device_path = DEVICE_PATH_GUID;
const efi_guid_t efi_guid_loaded_image = LOADED_IMAGE_GUID;
const efi_guid_t efi_simple_file_system_protocol_guid =
--
2.13.5
^ permalink raw reply related [flat|nested] 72+ messages in thread* [U-Boot] [PATCH v3 15/21] efi_loader: add bootmgr
2017-09-13 22:05 ` [U-Boot] [PATCH v3 15/21] efi_loader: add bootmgr Rob Clark
@ 2017-09-20 9:08 ` Alexander Graf
2017-09-20 14:09 ` Rob Clark
2017-09-21 7:05 ` [U-Boot] [U-Boot,v3,15/21] " Alexander Graf
1 sibling, 1 reply; 72+ messages in thread
From: Alexander Graf @ 2017-09-20 9:08 UTC (permalink / raw)
To: u-boot
On 14.09.17 00:05, Rob Clark wrote:
> Similar to a "real" UEFI implementation, the bootmgr looks at the
> BootOrder and BootXXXX variables to try to find an EFI payload to load
> and boot. This is added as a sub-command of bootefi.
>
> The idea is that the distro bootcmd would first try loading a payload
> via the bootmgr, and then if that fails (ie. first boot or corrupted
> EFI variables) it would fallback to loading bootaa64.efi. (Which
> would then load fallback.efi which would look for \EFI\*\boot.csv and
> populate BootOrder and BootXXXX based on what it found.)
>
> Signed-off-by: Rob Clark <robdclark@gmail.com>
Would it make sense to convert the bootmgr into a genuine EFI
application now that we have Heinrich's test framework available?
Alex
^ permalink raw reply [flat|nested] 72+ messages in thread
* [U-Boot] [PATCH v3 15/21] efi_loader: add bootmgr
2017-09-20 9:08 ` Alexander Graf
@ 2017-09-20 14:09 ` Rob Clark
2017-09-21 4:58 ` Simon Glass
0 siblings, 1 reply; 72+ messages in thread
From: Rob Clark @ 2017-09-20 14:09 UTC (permalink / raw)
To: u-boot
On Wed, Sep 20, 2017 at 5:08 AM, Alexander Graf <agraf@suse.de> wrote:
>
>
> On 14.09.17 00:05, Rob Clark wrote:
>>
>> Similar to a "real" UEFI implementation, the bootmgr looks at the
>> BootOrder and BootXXXX variables to try to find an EFI payload to load
>> and boot. This is added as a sub-command of bootefi.
>>
>> The idea is that the distro bootcmd would first try loading a payload
>> via the bootmgr, and then if that fails (ie. first boot or corrupted
>> EFI variables) it would fallback to loading bootaa64.efi. (Which
>> would then load fallback.efi which would look for \EFI\*\boot.csv and
>> populate BootOrder and BootXXXX based on what it found.)
>>
>> Signed-off-by: Rob Clark <robdclark@gmail.com>
>
>
> Would it make sense to convert the bootmgr into a genuine EFI application
> now that we have Heinrich's test framework available?
>
I had considered that, but then decided it was nice to be able to use
printf()/malloc()/etc.. plus easier to gdb/debug..
Maybe at some point it would be worth trying to fixup edk2 build so
some things like this and HII/unicode protocols and maybe a few other
things could be built as standalone .efi drivers and loaded by u-boot.
(Might make sense by the time someone wants a full blown HII "bios
setup menu" ;-))
BR,
-R
^ permalink raw reply [flat|nested] 72+ messages in thread
* [U-Boot] [PATCH v3 15/21] efi_loader: add bootmgr
2017-09-20 14:09 ` Rob Clark
@ 2017-09-21 4:58 ` Simon Glass
2017-09-21 5:07 ` Alexander Graf
2017-09-21 14:22 ` Rob Clark
0 siblings, 2 replies; 72+ messages in thread
From: Simon Glass @ 2017-09-21 4:58 UTC (permalink / raw)
To: u-boot
Hi,
On 20 September 2017 at 08:09, Rob Clark <robdclark@gmail.com> wrote:
> On Wed, Sep 20, 2017 at 5:08 AM, Alexander Graf <agraf@suse.de> wrote:
>>
>>
>> On 14.09.17 00:05, Rob Clark wrote:
>>>
>>> Similar to a "real" UEFI implementation, the bootmgr looks at the
>>> BootOrder and BootXXXX variables to try to find an EFI payload to load
>>> and boot. This is added as a sub-command of bootefi.
>>>
>>> The idea is that the distro bootcmd would first try loading a payload
>>> via the bootmgr, and then if that fails (ie. first boot or corrupted
>>> EFI variables) it would fallback to loading bootaa64.efi. (Which
>>> would then load fallback.efi which would look for \EFI\*\boot.csv and
>>> populate BootOrder and BootXXXX based on what it found.)
>>>
>>> Signed-off-by: Rob Clark <robdclark@gmail.com>
>>
>>
>> Would it make sense to convert the bootmgr into a genuine EFI application
>> now that we have Heinrich's test framework available?
>>
>
> I had considered that, but then decided it was nice to be able to use
> printf()/malloc()/etc.. plus easier to gdb/debug..
>
> Maybe at some point it would be worth trying to fixup edk2 build so
> some things like this and HII/unicode protocols and maybe a few other
> things could be built as standalone .efi drivers and loaded by u-boot.
> (Might make sense by the time someone wants a full blown HII "bios
> setup menu" ;-))
Another advantage of the current approach used by this series is that
we can test it with sandbox. With a separate EFI application we would
lose that ability.
Regards,
Simon
^ permalink raw reply [flat|nested] 72+ messages in thread
* [U-Boot] [PATCH v3 15/21] efi_loader: add bootmgr
2017-09-21 4:58 ` Simon Glass
@ 2017-09-21 5:07 ` Alexander Graf
2017-09-21 14:22 ` Rob Clark
1 sibling, 0 replies; 72+ messages in thread
From: Alexander Graf @ 2017-09-21 5:07 UTC (permalink / raw)
To: u-boot
> Am 21.09.2017 um 06:58 schrieb Simon Glass <sjg@chromium.org>:
>
> Hi,
>
>> On 20 September 2017 at 08:09, Rob Clark <robdclark@gmail.com> wrote:
>>> On Wed, Sep 20, 2017 at 5:08 AM, Alexander Graf <agraf@suse.de> wrote:
>>>
>>>
>>>> On 14.09.17 00:05, Rob Clark wrote:
>>>>
>>>> Similar to a "real" UEFI implementation, the bootmgr looks at the
>>>> BootOrder and BootXXXX variables to try to find an EFI payload to load
>>>> and boot. This is added as a sub-command of bootefi.
>>>>
>>>> The idea is that the distro bootcmd would first try loading a payload
>>>> via the bootmgr, and then if that fails (ie. first boot or corrupted
>>>> EFI variables) it would fallback to loading bootaa64.efi. (Which
>>>> would then load fallback.efi which would look for \EFI\*\boot.csv and
>>>> populate BootOrder and BootXXXX based on what it found.)
>>>>
>>>> Signed-off-by: Rob Clark <robdclark@gmail.com>
>>>
>>>
>>> Would it make sense to convert the bootmgr into a genuine EFI application
>>> now that we have Heinrich's test framework available?
>>>
>>
>> I had considered that, but then decided it was nice to be able to use
>> printf()/malloc()/etc.. plus easier to gdb/debug..
>>
>> Maybe at some point it would be worth trying to fixup edk2 build so
>> some things like this and HII/unicode protocols and maybe a few other
>> things could be built as standalone .efi drivers and loaded by u-boot.
>> (Might make sense by the time someone wants a full blown HII "bios
>> setup menu" ;-))
>
> Another advantage of the current approach used by this series is that
> we can test it with sandbox. With a separate EFI application we would
> lose that ability.
By separate I meant something similar to Heinrich's self-test that is compiled in, but runs in uefi context rather than u-boot context.
I agree that it's not terribly important though. I was just wondering if there was any benefit to it, as it mostly seems to consist of EFI_CALL() calls ;).
Alex
^ permalink raw reply [flat|nested] 72+ messages in thread
* [U-Boot] [PATCH v3 15/21] efi_loader: add bootmgr
2017-09-21 4:58 ` Simon Glass
2017-09-21 5:07 ` Alexander Graf
@ 2017-09-21 14:22 ` Rob Clark
2017-09-25 2:14 ` Simon Glass
1 sibling, 1 reply; 72+ messages in thread
From: Rob Clark @ 2017-09-21 14:22 UTC (permalink / raw)
To: u-boot
On Thu, Sep 21, 2017 at 12:58 AM, Simon Glass <sjg@chromium.org> wrote:
> Hi,
>
> On 20 September 2017 at 08:09, Rob Clark <robdclark@gmail.com> wrote:
>> On Wed, Sep 20, 2017 at 5:08 AM, Alexander Graf <agraf@suse.de> wrote:
>>>
>>>
>>> On 14.09.17 00:05, Rob Clark wrote:
>>>>
>>>> Similar to a "real" UEFI implementation, the bootmgr looks at the
>>>> BootOrder and BootXXXX variables to try to find an EFI payload to load
>>>> and boot. This is added as a sub-command of bootefi.
>>>>
>>>> The idea is that the distro bootcmd would first try loading a payload
>>>> via the bootmgr, and then if that fails (ie. first boot or corrupted
>>>> EFI variables) it would fallback to loading bootaa64.efi. (Which
>>>> would then load fallback.efi which would look for \EFI\*\boot.csv and
>>>> populate BootOrder and BootXXXX based on what it found.)
>>>>
>>>> Signed-off-by: Rob Clark <robdclark@gmail.com>
>>>
>>>
>>> Would it make sense to convert the bootmgr into a genuine EFI application
>>> now that we have Heinrich's test framework available?
>>>
>>
>> I had considered that, but then decided it was nice to be able to use
>> printf()/malloc()/etc.. plus easier to gdb/debug..
>>
>> Maybe at some point it would be worth trying to fixup edk2 build so
>> some things like this and HII/unicode protocols and maybe a few other
>> things could be built as standalone .efi drivers and loaded by u-boot.
>> (Might make sense by the time someone wants a full blown HII "bios
>> setup menu" ;-))
>
> Another advantage of the current approach used by this series is that
> we can test it with sandbox. With a separate EFI application we would
> lose that ability.
>
jfwiw, I do actually have Shell.efi very nearly loading in sandbox..
it crashes part-way through startup (shortly after reading "ShellOpt"
variable) and I haven't had a chance to debug further.. but I suspect
in some form or another having VA != "PA" in sandbox is biting us.
Anyways, getting a bit off topic, but separate .efi in sandbox doesn't
seem like it should be completely out of the question for sandbox..
and it would make sandbox *way* more useful for EFI testing, since
this is really half of the point of efi..
BR,
-R
^ permalink raw reply [flat|nested] 72+ messages in thread
* [U-Boot] [PATCH v3 15/21] efi_loader: add bootmgr
2017-09-21 14:22 ` Rob Clark
@ 2017-09-25 2:14 ` Simon Glass
0 siblings, 0 replies; 72+ messages in thread
From: Simon Glass @ 2017-09-25 2:14 UTC (permalink / raw)
To: u-boot
Hi Rob,
On 21 September 2017 at 08:22, Rob Clark <robdclark@gmail.com> wrote:
> On Thu, Sep 21, 2017 at 12:58 AM, Simon Glass <sjg@chromium.org> wrote:
>> Hi,
>>
>> On 20 September 2017 at 08:09, Rob Clark <robdclark@gmail.com> wrote:
>>> On Wed, Sep 20, 2017 at 5:08 AM, Alexander Graf <agraf@suse.de> wrote:
>>>>
>>>>
>>>> On 14.09.17 00:05, Rob Clark wrote:
>>>>>
>>>>> Similar to a "real" UEFI implementation, the bootmgr looks at the
>>>>> BootOrder and BootXXXX variables to try to find an EFI payload to load
>>>>> and boot. This is added as a sub-command of bootefi.
>>>>>
>>>>> The idea is that the distro bootcmd would first try loading a payload
>>>>> via the bootmgr, and then if that fails (ie. first boot or corrupted
>>>>> EFI variables) it would fallback to loading bootaa64.efi. (Which
>>>>> would then load fallback.efi which would look for \EFI\*\boot.csv and
>>>>> populate BootOrder and BootXXXX based on what it found.)
>>>>>
>>>>> Signed-off-by: Rob Clark <robdclark@gmail.com>
>>>>
>>>>
>>>> Would it make sense to convert the bootmgr into a genuine EFI application
>>>> now that we have Heinrich's test framework available?
>>>>
>>>
>>> I had considered that, but then decided it was nice to be able to use
>>> printf()/malloc()/etc.. plus easier to gdb/debug..
>>>
>>> Maybe at some point it would be worth trying to fixup edk2 build so
>>> some things like this and HII/unicode protocols and maybe a few other
>>> things could be built as standalone .efi drivers and loaded by u-boot.
>>> (Might make sense by the time someone wants a full blown HII "bios
>>> setup menu" ;-))
>>
>> Another advantage of the current approach used by this series is that
>> we can test it with sandbox. With a separate EFI application we would
>> lose that ability.
>>
>
> jfwiw, I do actually have Shell.efi very nearly loading in sandbox..
> it crashes part-way through startup (shortly after reading "ShellOpt"
> variable) and I haven't had a chance to debug further.. but I suspect
> in some form or another having VA != "PA" in sandbox is biting us.
>
> Anyways, getting a bit off topic, but separate .efi in sandbox doesn't
> seem like it should be completely out of the question for sandbox..
> and it would make sandbox *way* more useful for EFI testing, since
> this is really half of the point of efi..
Sounds very promising! The goal for sandbox is to test all U-Boot code
where it is practical to do so.
Regards,
Simon
^ permalink raw reply [flat|nested] 72+ messages in thread
* [U-Boot] [U-Boot,v3,15/21] efi_loader: add bootmgr
2017-09-13 22:05 ` [U-Boot] [PATCH v3 15/21] efi_loader: add bootmgr Rob Clark
2017-09-20 9:08 ` Alexander Graf
@ 2017-09-21 7:05 ` Alexander Graf
1 sibling, 0 replies; 72+ messages in thread
From: Alexander Graf @ 2017-09-21 7:05 UTC (permalink / raw)
To: u-boot
> Similar to a "real" UEFI implementation, the bootmgr looks at the
> BootOrder and BootXXXX variables to try to find an EFI payload to load
> and boot. This is added as a sub-command of bootefi.
>
> The idea is that the distro bootcmd would first try loading a payload
> via the bootmgr, and then if that fails (ie. first boot or corrupted
> EFI variables) it would fallback to loading bootaa64.efi. (Which
> would then load fallback.efi which would look for \EFI\*\boot.csv and
> populate BootOrder and BootXXXX based on what it found.)
>
> Signed-off-by: Rob Clark <robdclark@gmail.com>
Thanks, applied to efi-next
Alex
^ permalink raw reply [flat|nested] 72+ messages in thread
* [U-Boot] [PATCH v3 16/21] efi_loader: file_path should be variable length
2017-09-13 22:05 [U-Boot] [PATCH v3 00/21] efi_loader: enough UEFI for standard distro boot Rob Clark
` (14 preceding siblings ...)
2017-09-13 22:05 ` [U-Boot] [PATCH v3 15/21] efi_loader: add bootmgr Rob Clark
@ 2017-09-13 22:05 ` Rob Clark
2017-09-21 7:05 ` [U-Boot] [U-Boot, v3, " Alexander Graf
2017-09-13 22:05 ` [U-Boot] [PATCH v3 17/21] efi_loader: set loaded image code/data type properly Rob Clark
` (5 subsequent siblings)
21 siblings, 1 reply; 72+ messages in thread
From: Rob Clark @ 2017-09-13 22:05 UTC (permalink / raw)
To: u-boot
Signed-off-by: Rob Clark <robdclark@gmail.com>
---
include/efi_api.h | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/include/efi_api.h b/include/efi_api.h
index d0aefa8221..604c5b7ec4 100644
--- a/include/efi_api.h
+++ b/include/efi_api.h
@@ -373,7 +373,7 @@ struct efi_device_path_cdrom_path {
struct efi_device_path_file_path {
struct efi_device_path dp;
- u16 str[32];
+ u16 str[];
} __packed;
#define BLOCK_IO_GUID \
--
2.13.5
^ permalink raw reply related [flat|nested] 72+ messages in thread* [U-Boot] [PATCH v3 17/21] efi_loader: set loaded image code/data type properly
2017-09-13 22:05 [U-Boot] [PATCH v3 00/21] efi_loader: enough UEFI for standard distro boot Rob Clark
` (15 preceding siblings ...)
2017-09-13 22:05 ` [U-Boot] [PATCH v3 16/21] efi_loader: file_path should be variable length Rob Clark
@ 2017-09-13 22:05 ` Rob Clark
2017-09-21 7:05 ` [U-Boot] [U-Boot, v3, " Alexander Graf
2017-09-13 22:05 ` [U-Boot] [PATCH v3 18/21] efi_loader: print GUIDs Rob Clark
` (4 subsequent siblings)
21 siblings, 1 reply; 72+ messages in thread
From: Rob Clark @ 2017-09-13 22:05 UTC (permalink / raw)
To: u-boot
These should be set according to the image type. Shell.efi and SCT.efi
use these fields to determine what sort of image they are loading.
Signed-off-by: Rob Clark <robdclark@gmail.com>
---
include/pe.h | 6 ++++++
lib/efi_loader/efi_image_loader.c | 22 ++++++++++++++++++++++
2 files changed, 28 insertions(+)
diff --git a/include/pe.h b/include/pe.h
index deb35a0ea4..4ef3e92efa 100644
--- a/include/pe.h
+++ b/include/pe.h
@@ -62,6 +62,12 @@ typedef struct _IMAGE_DATA_DIRECTORY {
#define IMAGE_NUMBEROF_DIRECTORY_ENTRIES 16
+/* PE32+ Subsystem type for EFI images */
+#define IMAGE_SUBSYSTEM_EFI_APPLICATION 10
+#define IMAGE_SUBSYSTEM_EFI_BOOT_SERVICE_DRIVER 11
+#define IMAGE_SUBSYSTEM_EFI_RUNTIME_DRIVER 12
+#define IMAGE_SUBSYSTEM_SAL_RUNTIME_DRIVER 13
+
typedef struct _IMAGE_OPTIONAL_HEADER64 {
uint16_t Magic; /* 0x20b */
uint8_t MajorLinkerVersion;
diff --git a/lib/efi_loader/efi_image_loader.c b/lib/efi_loader/efi_image_loader.c
index 242e6a504b..af29cc4f04 100644
--- a/lib/efi_loader/efi_image_loader.c
+++ b/lib/efi_loader/efi_image_loader.c
@@ -94,6 +94,7 @@ void *efi_load_pe(void *efi, struct efi_loaded_image *loaded_image_info)
unsigned long virt_size = 0;
bool can_run_nt64 = true;
bool can_run_nt32 = true;
+ uint16_t image_type;
#if defined(CONFIG_ARM64)
can_run_nt32 = false;
@@ -139,6 +140,7 @@ void *efi_load_pe(void *efi, struct efi_loaded_image *loaded_image_info)
entry = efi_reloc + opt->AddressOfEntryPoint;
rel_size = opt->DataDirectory[rel_idx].Size;
rel = efi_reloc + opt->DataDirectory[rel_idx].VirtualAddress;
+ image_type = opt->Subsystem;
} else if (can_run_nt32 &&
(nt->OptionalHeader.Magic == IMAGE_NT_OPTIONAL_HDR32_MAGIC)) {
IMAGE_OPTIONAL_HEADER32 *opt = &nt->OptionalHeader;
@@ -152,12 +154,32 @@ void *efi_load_pe(void *efi, struct efi_loaded_image *loaded_image_info)
entry = efi_reloc + opt->AddressOfEntryPoint;
rel_size = opt->DataDirectory[rel_idx].Size;
rel = efi_reloc + opt->DataDirectory[rel_idx].VirtualAddress;
+ image_type = opt->Subsystem;
} else {
printf("%s: Invalid optional header magic %x\n", __func__,
nt->OptionalHeader.Magic);
return NULL;
}
+ switch (image_type) {
+ case IMAGE_SUBSYSTEM_EFI_APPLICATION:
+ loaded_image_info->image_code_type = EFI_LOADER_CODE;
+ loaded_image_info->image_data_type = EFI_LOADER_DATA;
+ break;
+ case IMAGE_SUBSYSTEM_EFI_BOOT_SERVICE_DRIVER:
+ loaded_image_info->image_code_type = EFI_BOOT_SERVICES_CODE;
+ loaded_image_info->image_data_type = EFI_BOOT_SERVICES_DATA;
+ break;
+ case IMAGE_SUBSYSTEM_EFI_RUNTIME_DRIVER:
+ case IMAGE_SUBSYSTEM_SAL_RUNTIME_DRIVER:
+ loaded_image_info->image_code_type = EFI_RUNTIME_SERVICES_CODE;
+ loaded_image_info->image_data_type = EFI_RUNTIME_SERVICES_DATA;
+ break;
+ default:
+ printf("%s: invalid image type: %u\n", __func__, image_type);
+ break;
+ }
+
/* Load sections into RAM */
for (i = num_sections - 1; i >= 0; i--) {
IMAGE_SECTION_HEADER *sec = §ions[i];
--
2.13.5
^ permalink raw reply related [flat|nested] 72+ messages in thread* [U-Boot] [PATCH v3 18/21] efi_loader: print GUIDs
2017-09-13 22:05 [U-Boot] [PATCH v3 00/21] efi_loader: enough UEFI for standard distro boot Rob Clark
` (16 preceding siblings ...)
2017-09-13 22:05 ` [U-Boot] [PATCH v3 17/21] efi_loader: set loaded image code/data type properly Rob Clark
@ 2017-09-13 22:05 ` Rob Clark
2017-09-21 7:04 ` [U-Boot] [U-Boot,v3,18/21] " Alexander Graf
2017-09-13 22:05 ` [U-Boot] [PATCH v3 19/21] efi_loader: split out escape sequence based size query Rob Clark
` (3 subsequent siblings)
21 siblings, 1 reply; 72+ messages in thread
From: Rob Clark @ 2017-09-13 22:05 UTC (permalink / raw)
To: u-boot
Utilize printf GUID support to print GUIDs.
Signed-off-by: Rob Clark <robdclark@gmail.com>
---
lib/efi_loader/efi_boottime.c | 22 +++++++++++-----------
lib/efi_loader/efi_variable.c | 6 +++---
2 files changed, 14 insertions(+), 14 deletions(-)
diff --git a/lib/efi_loader/efi_boottime.c b/lib/efi_loader/efi_boottime.c
index cea242cd49..b6f32c98d9 100644
--- a/lib/efi_loader/efi_boottime.c
+++ b/lib/efi_loader/efi_boottime.c
@@ -514,7 +514,7 @@ static efi_status_t EFIAPI efi_install_protocol_interface_ext(void **handle,
efi_guid_t *protocol, int protocol_interface_type,
void *protocol_interface)
{
- EFI_ENTRY("%p, %p, %d, %p", handle, protocol, protocol_interface_type,
+ EFI_ENTRY("%p, %pUl, %d, %p", handle, protocol, protocol_interface_type,
protocol_interface);
return EFI_EXIT(efi_install_protocol_interface(handle, protocol,
@@ -526,7 +526,7 @@ static efi_status_t EFIAPI efi_reinstall_protocol_interface(void *handle,
efi_guid_t *protocol, void *old_interface,
void *new_interface)
{
- EFI_ENTRY("%p, %p, %p, %p", handle, protocol, old_interface,
+ EFI_ENTRY("%p, %pUl, %p, %p", handle, protocol, old_interface,
new_interface);
return EFI_EXIT(EFI_ACCESS_DENIED);
}
@@ -575,7 +575,7 @@ out:
static efi_status_t EFIAPI efi_uninstall_protocol_interface_ext(void *handle,
efi_guid_t *protocol, void *protocol_interface)
{
- EFI_ENTRY("%p, %p, %p", handle, protocol, protocol_interface);
+ EFI_ENTRY("%p, %pUl, %p", handle, protocol, protocol_interface);
return EFI_EXIT(efi_uninstall_protocol_interface(handle, protocol,
protocol_interface));
@@ -585,7 +585,7 @@ static efi_status_t EFIAPI efi_register_protocol_notify(efi_guid_t *protocol,
struct efi_event *event,
void **registration)
{
- EFI_ENTRY("%p, %p, %p", protocol, event, registration);
+ EFI_ENTRY("%pUl, %p, %p", protocol, event, registration);
return EFI_EXIT(EFI_OUT_OF_RESOURCES);
}
@@ -655,7 +655,7 @@ static efi_status_t EFIAPI efi_locate_handle_ext(
efi_guid_t *protocol, void *search_key,
unsigned long *buffer_size, efi_handle_t *buffer)
{
- EFI_ENTRY("%d, %p, %p, %p, %p", search_type, protocol, search_key,
+ EFI_ENTRY("%d, %pUl, %p, %p, %p", search_type, protocol, search_key,
buffer_size, buffer);
return EFI_EXIT(efi_locate_handle(search_type, protocol, search_key,
@@ -723,7 +723,7 @@ efi_status_t efi_install_configuration_table(const efi_guid_t *guid, void *table
static efi_status_t EFIAPI efi_install_configuration_table_ext(efi_guid_t *guid,
void *table)
{
- EFI_ENTRY("%p, %p", guid, table);
+ EFI_ENTRY("%pUl, %p", guid, table);
return EFI_EXIT(efi_install_configuration_table(guid, table));
}
@@ -1012,7 +1012,7 @@ static efi_status_t EFIAPI efi_close_protocol(void *handle,
void *agent_handle,
void *controller_handle)
{
- EFI_ENTRY("%p, %p, %p, %p", handle, protocol, agent_handle,
+ EFI_ENTRY("%p, %pUl, %p, %p", handle, protocol, agent_handle,
controller_handle);
return EFI_EXIT(EFI_NOT_FOUND);
}
@@ -1022,7 +1022,7 @@ static efi_status_t EFIAPI efi_open_protocol_information(efi_handle_t handle,
struct efi_open_protocol_info_entry **entry_buffer,
unsigned long *entry_count)
{
- EFI_ENTRY("%p, %p, %p, %p", handle, protocol, entry_buffer,
+ EFI_ENTRY("%p, %pUl, %p, %p", handle, protocol, entry_buffer,
entry_count);
return EFI_EXIT(EFI_NOT_FOUND);
}
@@ -1088,7 +1088,7 @@ static efi_status_t EFIAPI efi_locate_handle_buffer(
efi_status_t r;
unsigned long buffer_size = 0;
- EFI_ENTRY("%d, %p, %p, %p, %p", search_type, protocol, search_key,
+ EFI_ENTRY("%d, %pUl, %p, %p, %p", search_type, protocol, search_key,
no_handles, buffer);
if (!no_handles || !buffer) {
@@ -1120,7 +1120,7 @@ static efi_status_t EFIAPI efi_locate_protocol(efi_guid_t *protocol,
struct list_head *lhandle;
int i;
- EFI_ENTRY("%p, %p, %p", protocol, registration, protocol_interface);
+ EFI_ENTRY("%pUl, %p, %p", protocol, registration, protocol_interface);
if (!protocol || !protocol_interface)
return EFI_EXIT(EFI_INVALID_PARAMETER);
@@ -1228,7 +1228,7 @@ static efi_status_t EFIAPI efi_open_protocol(
int i;
efi_status_t r = EFI_INVALID_PARAMETER;
- EFI_ENTRY("%p, %p, %p, %p, %p, 0x%x", handle, protocol,
+ EFI_ENTRY("%p, %pUl, %p, %p, %p, 0x%x", handle, protocol,
protocol_interface, agent_handle, controller_handle,
attributes);
diff --git a/lib/efi_loader/efi_variable.c b/lib/efi_loader/efi_variable.c
index 5569b3d3f0..6c177da3a6 100644
--- a/lib/efi_loader/efi_variable.c
+++ b/lib/efi_loader/efi_variable.c
@@ -187,7 +187,7 @@ efi_status_t EFIAPI efi_get_variable(s16 *variable_name,
const char *val, *s;
u32 attr;
- EFI_ENTRY("%p %p %p %p %p", variable_name, vendor, attributes,
+ EFI_ENTRY("\"%ls\" %pUl %p %p %p", variable_name, vendor, attributes,
data_size, data);
if (!variable_name || !vendor || !data_size)
@@ -255,7 +255,7 @@ efi_status_t EFIAPI efi_get_next_variable(
unsigned long *variable_name_size,
s16 *variable_name, efi_guid_t *vendor)
{
- EFI_ENTRY("%p %p %p", variable_name_size, variable_name, vendor);
+ EFI_ENTRY("%p \"%ls\" %pUl", variable_name_size, variable_name, vendor);
return EFI_EXIT(EFI_DEVICE_ERROR);
}
@@ -270,7 +270,7 @@ efi_status_t EFIAPI efi_set_variable(s16 *variable_name,
char *val, *s;
u32 attr;
- EFI_ENTRY("%p %p %x %lu %p", variable_name, vendor, attributes,
+ EFI_ENTRY("\"%ls\" %pUl %x %lu %p", variable_name, vendor, attributes,
data_size, data);
if (!variable_name || !vendor)
--
2.13.5
^ permalink raw reply related [flat|nested] 72+ messages in thread* [U-Boot] [PATCH v3 19/21] efi_loader: split out escape sequence based size query
2017-09-13 22:05 [U-Boot] [PATCH v3 00/21] efi_loader: enough UEFI for standard distro boot Rob Clark
` (17 preceding siblings ...)
2017-09-13 22:05 ` [U-Boot] [PATCH v3 18/21] efi_loader: print GUIDs Rob Clark
@ 2017-09-13 22:05 ` Rob Clark
2017-09-21 7:05 ` [U-Boot] [U-Boot, v3, " Alexander Graf
2017-09-13 22:05 ` [U-Boot] [PATCH v3 20/21] efi_loader: Correctly figure out size for vidconsole Rob Clark
` (2 subsequent siblings)
21 siblings, 1 reply; 72+ messages in thread
From: Rob Clark @ 2017-09-13 22:05 UTC (permalink / raw)
To: u-boot
We need to do something different for vidconsole, since it cannot
respond to the query on stdin. Prep work for next patch.
Signed-off-by: Rob Clark <robdclark@gmail.com>
---
lib/efi_loader/efi_console.c | 53 +++++++++++++++++++++++++-------------------
1 file changed, 30 insertions(+), 23 deletions(-)
diff --git a/lib/efi_loader/efi_console.c b/lib/efi_loader/efi_console.c
index 3fc82b8726..e8c02870eb 100644
--- a/lib/efi_loader/efi_console.c
+++ b/lib/efi_loader/efi_console.c
@@ -186,6 +186,34 @@ static bool cout_mode_matches(struct cout_mode *mode, int rows, int cols)
return (mode->rows == rows) && (mode->columns == cols);
}
+static int query_console_serial(int *rows, int *cols)
+{
+ /* Ask the terminal about its size */
+ int n[3];
+ u64 timeout;
+
+ /* Empty input buffer */
+ while (tstc())
+ getc();
+
+ printf(ESC"[18t");
+
+ /* Check if we have a terminal that understands */
+ timeout = timer_get_us() + 1000000;
+ while (!tstc())
+ if (timer_get_us() > timeout)
+ return -1;
+
+ /* Read {depth,rows,cols} */
+ if (term_read_reply(n, 3, 't'))
+ return -1;
+
+ *cols = n[2];
+ *rows = n[1];
+
+ return 0;
+}
+
static efi_status_t EFIAPI efi_cout_query_mode(
struct efi_simple_text_output_protocol *this,
unsigned long mode_number, unsigned long *columns,
@@ -194,33 +222,12 @@ static efi_status_t EFIAPI efi_cout_query_mode(
EFI_ENTRY("%p, %ld, %p, %p", this, mode_number, columns, rows);
if (!console_size_queried) {
- /* Ask the terminal about its size */
- int n[3];
- int cols;
- int rows;
- u64 timeout;
+ int rows, cols;
console_size_queried = true;
- /* Empty input buffer */
- while (tstc())
- getc();
-
- printf(ESC"[18t");
-
- /* Check if we have a terminal that understands */
- timeout = timer_get_us() + 1000000;
- while (!tstc())
- if (timer_get_us() > timeout)
- goto out;
-
- /* Read {depth,rows,cols} */
- if (term_read_reply(n, 3, 't')) {
+ if (query_console_serial(&rows, &cols))
goto out;
- }
-
- cols = n[2];
- rows = n[1];
/* Test if we can have Mode 1 */
if (cols >= 80 && rows >= 50) {
--
2.13.5
^ permalink raw reply related [flat|nested] 72+ messages in thread* [U-Boot] [PATCH v3 20/21] efi_loader: Correctly figure out size for vidconsole
2017-09-13 22:05 [U-Boot] [PATCH v3 00/21] efi_loader: enough UEFI for standard distro boot Rob Clark
` (18 preceding siblings ...)
2017-09-13 22:05 ` [U-Boot] [PATCH v3 19/21] efi_loader: split out escape sequence based size query Rob Clark
@ 2017-09-13 22:05 ` Rob Clark
2017-09-21 7:04 ` [U-Boot] [U-Boot, v3, " Alexander Graf
2017-09-13 22:05 ` [U-Boot] [PATCH v3 21/21] efi_loader: Some console improvements " Rob Clark
2017-09-20 9:32 ` [U-Boot] [PATCH v3 00/21] efi_loader: enough UEFI for standard distro boot Alexander Graf
21 siblings, 1 reply; 72+ messages in thread
From: Rob Clark @ 2017-09-13 22:05 UTC (permalink / raw)
To: u-boot
If stdout is vidconsole, we cannot rely on ANSI escape sequences to
query the size, as vidconsole cannot reply on stdin. Instead special-
case this if stdout is vidconsole.
Signed-off-by: Rob Clark <robdclark@gmail.com>
---
lib/efi_loader/efi_console.c | 16 +++++++++++++++-
1 file changed, 15 insertions(+), 1 deletion(-)
diff --git a/lib/efi_loader/efi_console.c b/lib/efi_loader/efi_console.c
index e8c02870eb..9048a8d32c 100644
--- a/lib/efi_loader/efi_console.c
+++ b/lib/efi_loader/efi_console.c
@@ -8,7 +8,10 @@
#include <common.h>
#include <charset.h>
+#include <dm/device.h>
#include <efi_loader.h>
+#include <stdio_dev.h>
+#include <video_console.h>
static bool console_size_queried;
@@ -222,12 +225,23 @@ static efi_status_t EFIAPI efi_cout_query_mode(
EFI_ENTRY("%p, %ld, %p, %p", this, mode_number, columns, rows);
if (!console_size_queried) {
+ const char *stdout_name = env_get("stdout");
int rows, cols;
console_size_queried = true;
- if (query_console_serial(&rows, &cols))
+ if (stdout_name && !strcmp(stdout_name, "vidconsole") &&
+ IS_ENABLED(CONFIG_DM_VIDEO)) {
+ struct stdio_dev *stdout_dev =
+ stdio_get_by_name("vidconsole");
+ struct udevice *dev = stdout_dev->priv;
+ struct vidconsole_priv *priv =
+ dev_get_uclass_priv(dev);
+ rows = priv->rows;
+ cols = priv->cols;
+ } else if (query_console_serial(&rows, &cols)) {
goto out;
+ }
/* Test if we can have Mode 1 */
if (cols >= 80 && rows >= 50) {
--
2.13.5
^ permalink raw reply related [flat|nested] 72+ messages in thread* [U-Boot] [PATCH v3 21/21] efi_loader: Some console improvements for vidconsole
2017-09-13 22:05 [U-Boot] [PATCH v3 00/21] efi_loader: enough UEFI for standard distro boot Rob Clark
` (19 preceding siblings ...)
2017-09-13 22:05 ` [U-Boot] [PATCH v3 20/21] efi_loader: Correctly figure out size for vidconsole Rob Clark
@ 2017-09-13 22:05 ` Rob Clark
2017-09-21 7:05 ` [U-Boot] [U-Boot, v3, " Alexander Graf
2017-09-20 9:32 ` [U-Boot] [PATCH v3 00/21] efi_loader: enough UEFI for standard distro boot Alexander Graf
21 siblings, 1 reply; 72+ messages in thread
From: Rob Clark @ 2017-09-13 22:05 UTC (permalink / raw)
To: u-boot
1) use fputs() to reduce cache flushes from once-per-char to
once-per-string
2) handle \r, \t, and \b in addition to just \n for tracking
cursor position
3) cursor row/col are zero based, not one based
Signed-off-by: Rob Clark <robdclark@gmail.com>
---
include/efi_api.h | 6 +++--
lib/efi_loader/efi_console.c | 58 ++++++++++++++++++++++++++------------------
2 files changed, 39 insertions(+), 25 deletions(-)
diff --git a/include/efi_api.h b/include/efi_api.h
index 604c5b7ec4..c3b9032a48 100644
--- a/include/efi_api.h
+++ b/include/efi_api.h
@@ -29,6 +29,8 @@ enum efi_timer_delay {
};
#define UINTN size_t
+typedef long INTN;
+typedef uint16_t *efi_string_t;
#define EVT_TIMER 0x80000000
#define EVT_RUNTIME 0x40000000
@@ -427,10 +429,10 @@ struct efi_simple_text_output_protocol {
void *reset;
efi_status_t (EFIAPI *output_string)(
struct efi_simple_text_output_protocol *this,
- const unsigned short *str);
+ const efi_string_t str);
efi_status_t (EFIAPI *test_string)(
struct efi_simple_text_output_protocol *this,
- const unsigned short *str);
+ const efi_string_t str);
efi_status_t(EFIAPI *query_mode)(
struct efi_simple_text_output_protocol *this,
unsigned long mode_number, unsigned long *columns,
diff --git a/lib/efi_loader/efi_console.c b/lib/efi_loader/efi_console.c
index 9048a8d32c..afc725a2c7 100644
--- a/lib/efi_loader/efi_console.c
+++ b/lib/efi_loader/efi_console.c
@@ -140,34 +140,46 @@ static efi_status_t EFIAPI efi_cout_reset(
return EFI_EXIT(EFI_UNSUPPORTED);
}
-static void print_unicode_in_utf8(u16 c)
-{
- char utf8[MAX_UTF8_PER_UTF16] = { 0 };
- utf16_to_utf8((u8 *)utf8, &c, 1);
- puts(utf8);
-}
-
static efi_status_t EFIAPI efi_cout_output_string(
struct efi_simple_text_output_protocol *this,
- const unsigned short *string)
+ const efi_string_t string)
{
- struct cout_mode *mode;
- u16 ch;
+ struct simple_text_output_mode *con = &efi_con_mode;
+ struct cout_mode *mode = &efi_cout_modes[con->mode];
- mode = &efi_cout_modes[efi_con_mode.mode];
EFI_ENTRY("%p, %p", this, string);
- for (;(ch = *string); string++) {
- print_unicode_in_utf8(ch);
- efi_con_mode.cursor_column++;
- if (ch == '\n') {
- efi_con_mode.cursor_column = 1;
- efi_con_mode.cursor_row++;
- } else if (efi_con_mode.cursor_column > mode->columns) {
- efi_con_mode.cursor_column = 1;
- efi_con_mode.cursor_row++;
+
+ unsigned n16 = utf16_strlen(string);
+ char buf[MAX_UTF8_PER_UTF16 * n16 + 1];
+ char *p;
+
+ *utf16_to_utf8((u8 *)buf, string, n16) = '\0';
+
+ fputs(stdout, buf);
+
+ for (p = buf; *p; p++) {
+ switch (*p) {
+ case '\r': /* carriage-return */
+ con->cursor_column = 0;
+ break;
+ case '\n': /* newline */
+ con->cursor_column = 0;
+ con->cursor_row++;
+ break;
+ case '\t': /* tab, assume 8 char align */
+ break;
+ case '\b': /* backspace */
+ con->cursor_column = max(0, con->cursor_column - 1);
+ break;
+ default:
+ con->cursor_column++;
+ break;
+ }
+ if (con->cursor_column >= mode->columns) {
+ con->cursor_column = 0;
+ con->cursor_row++;
}
- if (efi_con_mode.cursor_row > mode->rows)
- efi_con_mode.cursor_row = mode->rows;
+ con->cursor_row = min(con->cursor_row, (s32)mode->rows - 1);
}
return EFI_EXIT(EFI_SUCCESS);
@@ -175,7 +187,7 @@ static efi_status_t EFIAPI efi_cout_output_string(
static efi_status_t EFIAPI efi_cout_test_string(
struct efi_simple_text_output_protocol *this,
- const unsigned short *string)
+ const efi_string_t string)
{
EFI_ENTRY("%p, %p", this, string);
return EFI_EXIT(EFI_SUCCESS);
--
2.13.5
^ permalink raw reply related [flat|nested] 72+ messages in thread* [U-Boot] [PATCH v3 00/21] efi_loader: enough UEFI for standard distro boot
2017-09-13 22:05 [U-Boot] [PATCH v3 00/21] efi_loader: enough UEFI for standard distro boot Rob Clark
` (20 preceding siblings ...)
2017-09-13 22:05 ` [U-Boot] [PATCH v3 21/21] efi_loader: Some console improvements " Rob Clark
@ 2017-09-20 9:32 ` Alexander Graf
21 siblings, 0 replies; 72+ messages in thread
From: Alexander Graf @ 2017-09-20 9:32 UTC (permalink / raw)
To: u-boot
On 14.09.17 00:05, Rob Clark wrote:
> This patchset fleshes out EFI_LOADER enough to support booting an
> upstream \EFI\BOOT\bootaa64.efi (which then loads fallback.efi and
> then eventually the per-distro shim.efi which loads the per-distro
> grubaa64.efi) without resorting to hacks to hard-code u-boot to load
> a particular distro's grub, or other hacks like setting up the
> distro installation as live-media.
>
> Background: with a normal UEFI implementation, the boot process is:
>
> a) firmware (u-boot) looks at BootOrder and the BootXXXX variables
> to try to determine what to boot.
> b) the firmware will look at the BootXXXX variables (which contain
> an EFI_LOAD_OPTION "struct" in order specified by BootOrder, and
> will boot the first bootable option.
> c) The EFI_LOAD_OPTION specifies a device-path which identifies the
> device and file path of the .efi payload to exectute.
>
> This is implemented with the 'bootefi bootmgr' command.
>
> If there are no bootable options the firmware falls back to loading
> \EFI\BOOT\bootaa64.efi (exact name varies depending on arch), which
> for distro's using fallback/shim (which should include most modern
> linux distros) then loads fallback.efi which uses the
> EFI_SIMPLE_FILE_SYSTEM_PROTCOL and EFI_FILE_PROTOCOL to search for
> any \EFI\*\boot.csv, and will then set BootOrder and BootXXXX EFI
> variables accordingly so that on next boot fallback.efi is not
> necessary.
>
> The last 5 patches are a bit unrelated, just pulling forward some of
> the patches I have from the next patchset, to get Shell.efi and SCT
> working.
I've pulled the patches into efi-next, but want to run them through
Travis first and then do some smoke tests myself before sending them as
pull request.
Please follow up with fixes to the "unsigned" type warnings. Just use
"unsigned int" everywhere.
Alex
^ permalink raw reply [flat|nested] 72+ messages in thread