[RESEND PATCH v5 0/4] Add STM32 DMAMUX support

[RESEND PATCH v5 0/4] Add STM32 DMAMUX support

[Pierre-Yves MORDRET]

This patchset adds support for the STM32 DMA multiplexer.
It allows to map any peripheral DMA request to any channel of the product
DMAs.
This IP has been introduced with STM32H7 SoC.

---
 Version history:
    v5:
        * Set selected channel ID within a lock to avoid race condition.
          Release if any error occurs
    v4:
        * Add multi-master ability for STM32 DMAMUX
        * Get rid of st,dmamux property and custom API between STM32
          DMAMUX and DMA. Bindings has changed.
          DMAMUX will read DMA masters from Device Tree from now on.
          Merely one DMAMUX node is needed now.
        * Only STM32 DMA are allowed to be connected onto DMAMUX
        * channelID is computed locally within the driver and crafted in
          dma_psec to be passed toward DMA master.
          DMAMUX router sorts out which DMA master will serve the
          request automatically.
        * This version forbids the use of DMA in standalone and DMAMUX at
          the same time : all clients need to be connected either on DMA
          or DMAMUX ; no mix up
    v3:
        * change compatible to st,stm32h7-dmamux to be mode Soc specific
        * add verbosity in dma-cells
---

Pierre-Yves MORDRET (4):
  dt-bindings: Document the STM32 DMAMUX bindings
  dmaengine: Add STM32 DMAMUX driver
  dt-bindings: stm32-dma: add a property to handle STM32 DMAMUX
  ARM: configs: stm32: Add DMAMUX support in STM32 defconfig

 .../devicetree/bindings/dma/stm32-dma.txt          |   4 +-
 .../devicetree/bindings/dma/stm32-dmamux.txt       |  84 ++++++
 arch/arm/configs/stm32_defconfig                   |   1 +
 drivers/dma/Kconfig                                |   9 +
 drivers/dma/Makefile                               |   1 +
 drivers/dma/stm32-dmamux.c                         | 327 +++++++++++++++++++++
 6 files changed, 425 insertions(+), 1 deletion(-)
 create mode 100644 Documentation/devicetree/bindings/dma/stm32-dmamux.txt
 create mode 100644 drivers/dma/stm32-dmamux.c

-- 
2.7.4

[RESEND PATCH v5 0/4] Add STM32 DMAMUX support

[Pierre-Yves MORDRET]

This patchset adds support for the STM32 DMA multiplexer.
It allows to map any peripheral DMA request to any channel of the product
DMAs.
This IP has been introduced with STM32H7 SoC.

---
 Version history:
    v5:
        * Set selected channel ID within a lock to avoid race condition.
          Release if any error occurs
    v4:
        * Add multi-master ability for STM32 DMAMUX
        * Get rid of st,dmamux property and custom API between STM32
          DMAMUX and DMA. Bindings has changed.
          DMAMUX will read DMA masters from Device Tree from now on.
          Merely one DMAMUX node is needed now.
        * Only STM32 DMA are allowed to be connected onto DMAMUX
        * channelID is computed locally within the driver and crafted in
          dma_psec to be passed toward DMA master.
          DMAMUX router sorts out which DMA master will serve the
          request automatically.
        * This version forbids the use of DMA in standalone and DMAMUX at
          the same time : all clients need to be connected either on DMA
          or DMAMUX ; no mix up
    v3:
        * change compatible to st,stm32h7-dmamux to be mode Soc specific
        * add verbosity in dma-cells
---

Pierre-Yves MORDRET (4):
  dt-bindings: Document the STM32 DMAMUX bindings
  dmaengine: Add STM32 DMAMUX driver
  dt-bindings: stm32-dma: add a property to handle STM32 DMAMUX
  ARM: configs: stm32: Add DMAMUX support in STM32 defconfig

 .../devicetree/bindings/dma/stm32-dma.txt          |   4 +-
 .../devicetree/bindings/dma/stm32-dmamux.txt       |  84 ++++++
 arch/arm/configs/stm32_defconfig                   |   1 +
 drivers/dma/Kconfig                                |   9 +
 drivers/dma/Makefile                               |   1 +
 drivers/dma/stm32-dmamux.c                         | 327 +++++++++++++++++++++
 6 files changed, 425 insertions(+), 1 deletion(-)
 create mode 100644 Documentation/devicetree/bindings/dma/stm32-dmamux.txt
 create mode 100644 drivers/dma/stm32-dmamux.c

-- 
2.7.4

[RESEND PATCH v5 0/4] Add STM32 DMAMUX support

[Pierre-Yves MORDRET]

This patchset adds support for the STM32 DMA multiplexer.
It allows to map any peripheral DMA request to any channel of the product
DMAs.
This IP has been introduced with STM32H7 SoC.

---
 Version history:
    v5:
        * Set selected channel ID within a lock to avoid race condition.
          Release if any error occurs
    v4:
        * Add multi-master ability for STM32 DMAMUX
        * Get rid of st,dmamux property and custom API between STM32
          DMAMUX and DMA. Bindings has changed.
          DMAMUX will read DMA masters from Device Tree from now on.
          Merely one DMAMUX node is needed now.
        * Only STM32 DMA are allowed to be connected onto DMAMUX
        * channelID is computed locally within the driver and crafted in
          dma_psec to be passed toward DMA master.
          DMAMUX router sorts out which DMA master will serve the
          request automatically.
        * This version forbids the use of DMA in standalone and DMAMUX at
          the same time : all clients need to be connected either on DMA
          or DMAMUX ; no mix up
    v3:
        * change compatible to st,stm32h7-dmamux to be mode Soc specific
        * add verbosity in dma-cells
---

Pierre-Yves MORDRET (4):
  dt-bindings: Document the STM32 DMAMUX bindings
  dmaengine: Add STM32 DMAMUX driver
  dt-bindings: stm32-dma: add a property to handle STM32 DMAMUX
  ARM: configs: stm32: Add DMAMUX support in STM32 defconfig

 .../devicetree/bindings/dma/stm32-dma.txt          |   4 +-
 .../devicetree/bindings/dma/stm32-dmamux.txt       |  84 ++++++
 arch/arm/configs/stm32_defconfig                   |   1 +
 drivers/dma/Kconfig                                |   9 +
 drivers/dma/Makefile                               |   1 +
 drivers/dma/stm32-dmamux.c                         | 327 +++++++++++++++++++++
 6 files changed, 425 insertions(+), 1 deletion(-)
 create mode 100644 Documentation/devicetree/bindings/dma/stm32-dmamux.txt
 create mode 100644 drivers/dma/stm32-dmamux.c

-- 
2.7.4

[RESEND PATCH v5 1/4] dt-bindings: Document the STM32 DMAMUX bindings

[Pierre-Yves MORDRET]

This patch adds the documentation of device tree bindings for the STM32
DMAMUX.

Signed-off-by: M'boumba Cedric Madianga <cedric.madianga@gmail.com>
Signed-off-by: Pierre-Yves MORDRET <pierre-yves.mordret@st.com>
Acked-by: Rob Herring <robh@kernel.org>
---
 Version history:
    v5:
    v4:
        * Add multi-master ability for STM32 DMAMUX
        * Get rid of st,dmamux properties
    v3:
        * Change compatible to st,stm32h7-dmamux to be mode Soc specific
        * Add verbosity in dma-cells
    v2:
        * Move clock bindings from optional to mandatory one
        * Drop channelID bindings as managed dynamically from now on by
          DMAMUX driver.
---
---
 .../devicetree/bindings/dma/stm32-dmamux.txt       | 84 ++++++++++++++++++++++
 1 file changed, 84 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/dma/stm32-dmamux.txt

diff --git a/Documentation/devicetree/bindings/dma/stm32-dmamux.txt b/Documentation/devicetree/bindings/dma/stm32-dmamux.txt
new file mode 100644
index 0000000..1b893b2
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/stm32-dmamux.txt
@@ -0,0 +1,84 @@
+STM32 DMA MUX (DMA request router)
+
+Required properties:
+- compatible:	"st,stm32h7-dmamux"
+- reg:		Memory map for accessing module
+- #dma-cells:	Should be set to <3>.
+		First parameter is request line number.
+		Second is DMA channel configuration
+		Third is Fifo threshold
+		For more details about the three cells, please see
+		stm32-dma.txt documentation binding file
+- dma-masters:	Phandle pointing to the DMA controllers.
+		Several controllers are allowed. Only "st,stm32-dma" DMA
+		compatible are supported.
+
+Optional properties:
+- dma-channels : Number of DMA requests supported.
+- dma-requests : Number of DMAMUX requests supported.
+- resets: Reference to a reset controller asserting the DMA controller
+- clocks: Input clock of the DMAMUX instance.
+
+Example:
+
+/* DMA controller 1 */
+dma1: dma-controller@40020000 {
+	compatible = "st,stm32-dma";
+	reg = <0x40020000 0x400>;
+	interrupts = <11>,
+		     <12>,
+		     <13>,
+		     <14>,
+		     <15>,
+		     <16>,
+		     <17>,
+		     <47>;
+	clocks = <&timer_clk>;
+	#dma-cells = <4>;
+	st,mem2mem;
+	resets = <&rcc 150>;
+	dma-channels = <8>;
+	dma-requests = <8>;
+};
+
+/* DMA controller 1 */
+dma2: dma@40020400 {
+	compatible = "st,stm32-dma";
+	reg = <0x40020400 0x400>;
+	interrupts = <56>,
+		     <57>,
+		     <58>,
+		     <59>,
+		     <60>,
+		     <68>,
+		     <69>,
+		     <70>;
+	clocks = <&timer_clk>;
+	#dma-cells = <4>;
+	st,mem2mem;
+	resets = <&rcc 150>;
+	dma-channels = <8>;
+	dma-requests = <8>;
+};
+
+/* DMA mux */
+dmamux1: dma-router@40020800 {
+	compatible = "st,stm32h7-dmamux";
+	reg = <0x40020800 0x3c>;
+	#dma-cells = <3>;
+	dma-requests = <128>;
+	dma-channels = <16>;
+	dma-masters = <&dma1 &dma2>;
+	clocks = <&timer_clk>;
+};
+
+/* DMA client */
+usart1: serial@40011000 {
+	compatible = "st,stm32-usart", "st,stm32-uart";
+	reg = <0x40011000 0x400>;
+	interrupts = <37>;
+	clocks = <&timer_clk>;
+	dmas = <&dmamux1 41 0x414 0>,
+	       <&dmamux1 42 0x414 0>;
+	dma-names = "rx", "tx";
+};
-- 
2.7.4

[RESEND PATCH v5 1/4] dt-bindings: Document the STM32 DMAMUX bindings

[Pierre-Yves MORDRET]

This patch adds the documentation of device tree bindings for the STM32
DMAMUX.

Signed-off-by: M'boumba Cedric Madianga <cedric.madianga@gmail.com>
Signed-off-by: Pierre-Yves MORDRET <pierre-yves.mordret@st.com>
Acked-by: Rob Herring <robh@kernel.org>
---
 Version history:
    v5:
    v4:
        * Add multi-master ability for STM32 DMAMUX
        * Get rid of st,dmamux properties
    v3:
        * Change compatible to st,stm32h7-dmamux to be mode Soc specific
        * Add verbosity in dma-cells
    v2:
        * Move clock bindings from optional to mandatory one
        * Drop channelID bindings as managed dynamically from now on by
          DMAMUX driver.
---
---
 .../devicetree/bindings/dma/stm32-dmamux.txt       | 84 ++++++++++++++++++++++
 1 file changed, 84 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/dma/stm32-dmamux.txt

diff --git a/Documentation/devicetree/bindings/dma/stm32-dmamux.txt b/Documentation/devicetree/bindings/dma/stm32-dmamux.txt
new file mode 100644
index 0000000..1b893b2
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/stm32-dmamux.txt
@@ -0,0 +1,84 @@
+STM32 DMA MUX (DMA request router)
+
+Required properties:
+- compatible:	"st,stm32h7-dmamux"
+- reg:		Memory map for accessing module
+- #dma-cells:	Should be set to <3>.
+		First parameter is request line number.
+		Second is DMA channel configuration
+		Third is Fifo threshold
+		For more details about the three cells, please see
+		stm32-dma.txt documentation binding file
+- dma-masters:	Phandle pointing to the DMA controllers.
+		Several controllers are allowed. Only "st,stm32-dma" DMA
+		compatible are supported.
+
+Optional properties:
+- dma-channels : Number of DMA requests supported.
+- dma-requests : Number of DMAMUX requests supported.
+- resets: Reference to a reset controller asserting the DMA controller
+- clocks: Input clock of the DMAMUX instance.
+
+Example:
+
+/* DMA controller 1 */
+dma1: dma-controller at 40020000 {
+	compatible = "st,stm32-dma";
+	reg = <0x40020000 0x400>;
+	interrupts = <11>,
+		     <12>,
+		     <13>,
+		     <14>,
+		     <15>,
+		     <16>,
+		     <17>,
+		     <47>;
+	clocks = <&timer_clk>;
+	#dma-cells = <4>;
+	st,mem2mem;
+	resets = <&rcc 150>;
+	dma-channels = <8>;
+	dma-requests = <8>;
+};
+
+/* DMA controller 1 */
+dma2: dma at 40020400 {
+	compatible = "st,stm32-dma";
+	reg = <0x40020400 0x400>;
+	interrupts = <56>,
+		     <57>,
+		     <58>,
+		     <59>,
+		     <60>,
+		     <68>,
+		     <69>,
+		     <70>;
+	clocks = <&timer_clk>;
+	#dma-cells = <4>;
+	st,mem2mem;
+	resets = <&rcc 150>;
+	dma-channels = <8>;
+	dma-requests = <8>;
+};
+
+/* DMA mux */
+dmamux1: dma-router at 40020800 {
+	compatible = "st,stm32h7-dmamux";
+	reg = <0x40020800 0x3c>;
+	#dma-cells = <3>;
+	dma-requests = <128>;
+	dma-channels = <16>;
+	dma-masters = <&dma1 &dma2>;
+	clocks = <&timer_clk>;
+};
+
+/* DMA client */
+usart1: serial at 40011000 {
+	compatible = "st,stm32-usart", "st,stm32-uart";
+	reg = <0x40011000 0x400>;
+	interrupts = <37>;
+	clocks = <&timer_clk>;
+	dmas = <&dmamux1 41 0x414 0>,
+	       <&dmamux1 42 0x414 0>;
+	dma-names = "rx", "tx";
+};
-- 
2.7.4

[RESEND PATCH v5 1/4] dt-bindings: Document the STM32 DMAMUX bindings

[Pierre-Yves MORDRET]

This patch adds the documentation of device tree bindings for the STM32
DMAMUX.

Signed-off-by: M'boumba Cedric Madianga <cedric.madianga-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
Signed-off-by: Pierre-Yves MORDRET <pierre-yves.mordret-qxv4g6HH51o@public.gmane.org>
Acked-by: Rob Herring <robh-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
---
 Version history:
    v5:
    v4:
        * Add multi-master ability for STM32 DMAMUX
        * Get rid of st,dmamux properties
    v3:
        * Change compatible to st,stm32h7-dmamux to be mode Soc specific
        * Add verbosity in dma-cells
    v2:
        * Move clock bindings from optional to mandatory one
        * Drop channelID bindings as managed dynamically from now on by
          DMAMUX driver.
---
---
 .../devicetree/bindings/dma/stm32-dmamux.txt       | 84 ++++++++++++++++++++++
 1 file changed, 84 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/dma/stm32-dmamux.txt

diff --git a/Documentation/devicetree/bindings/dma/stm32-dmamux.txt b/Documentation/devicetree/bindings/dma/stm32-dmamux.txt
new file mode 100644
index 0000000..1b893b2
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/stm32-dmamux.txt
@@ -0,0 +1,84 @@
+STM32 DMA MUX (DMA request router)
+
+Required properties:
+- compatible:	"st,stm32h7-dmamux"
+- reg:		Memory map for accessing module
+- #dma-cells:	Should be set to <3>.
+		First parameter is request line number.
+		Second is DMA channel configuration
+		Third is Fifo threshold
+		For more details about the three cells, please see
+		stm32-dma.txt documentation binding file
+- dma-masters:	Phandle pointing to the DMA controllers.
+		Several controllers are allowed. Only "st,stm32-dma" DMA
+		compatible are supported.
+
+Optional properties:
+- dma-channels : Number of DMA requests supported.
+- dma-requests : Number of DMAMUX requests supported.
+- resets: Reference to a reset controller asserting the DMA controller
+- clocks: Input clock of the DMAMUX instance.
+
+Example:
+
+/* DMA controller 1 */
+dma1: dma-controller@40020000 {
+	compatible = "st,stm32-dma";
+	reg = <0x40020000 0x400>;
+	interrupts = <11>,
+		     <12>,
+		     <13>,
+		     <14>,
+		     <15>,
+		     <16>,
+		     <17>,
+		     <47>;
+	clocks = <&timer_clk>;
+	#dma-cells = <4>;
+	st,mem2mem;
+	resets = <&rcc 150>;
+	dma-channels = <8>;
+	dma-requests = <8>;
+};
+
+/* DMA controller 1 */
+dma2: dma@40020400 {
+	compatible = "st,stm32-dma";
+	reg = <0x40020400 0x400>;
+	interrupts = <56>,
+		     <57>,
+		     <58>,
+		     <59>,
+		     <60>,
+		     <68>,
+		     <69>,
+		     <70>;
+	clocks = <&timer_clk>;
+	#dma-cells = <4>;
+	st,mem2mem;
+	resets = <&rcc 150>;
+	dma-channels = <8>;
+	dma-requests = <8>;
+};
+
+/* DMA mux */
+dmamux1: dma-router@40020800 {
+	compatible = "st,stm32h7-dmamux";
+	reg = <0x40020800 0x3c>;
+	#dma-cells = <3>;
+	dma-requests = <128>;
+	dma-channels = <16>;
+	dma-masters = <&dma1 &dma2>;
+	clocks = <&timer_clk>;
+};
+
+/* DMA client */
+usart1: serial@40011000 {
+	compatible = "st,stm32-usart", "st,stm32-uart";
+	reg = <0x40011000 0x400>;
+	interrupts = <37>;
+	clocks = <&timer_clk>;
+	dmas = <&dmamux1 41 0x414 0>,
+	       <&dmamux1 42 0x414 0>;
+	dma-names = "rx", "tx";
+};
-- 
2.7.4

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[RESEND PATCH v5 2/4] dmaengine: Add STM32 DMAMUX driver

[Pierre-Yves MORDRET]

This patch implements the STM32 DMAMUX driver.

The DMAMUX request multiplexer allows routing a DMA request line between
the peripherals and the DMA controllers of the product. The routing
function is ensured by a programmable multi-channel DMA request line
multiplexer. Each channel selects a unique DMA request line,
unconditionally or synchronously with events from its DMAMUX
synchronization inputs. The DMAMUX may also be used as a DMA request
generator from programmable events on its input trigger signals

Signed-off-by: M'boumba Cedric Madianga <cedric.madianga@gmail.com>
Signed-off-by: Pierre-Yves MORDRET <pierre-yves.mordret@st.com>
---
 Version history:
    v5:
        * Set selected channel ID within a lock to avoid race condition.
          Release if any error occurs
    v4:
        * Get rid of st,dmamux property and custom API between STM32
          DMAMUX and DMA.
          DMAMUX will read DMA masters from Device Tree from now on.
          Merely one DMAMUX node is needed now.
        * Only STM32 DMA are allowed to be connected onto DMAMUX
        * channelID is computed locally within the driver and crafted in
          dma_psec to be passed toward DMA master.
          DMAMUX router sorts out which DMA master will serve the
          request automatically.
        * This version forbids the use of DMA in standalone and DMAMUX at
          the same time : all clients need to be connected either on DMA
          or DMAMUX ; no mix up
    v3:
        * change compatible to st,stm32h7-dmamux to be mode SoC specific
    v2:
        * Dynamic channelID allocation.
        * Change of_property_... by device_property.
        * New clock management.
        * DMAMUX Configuration API.
---
---
 drivers/dma/Kconfig        |   9 ++
 drivers/dma/Makefile       |   1 +
 drivers/dma/stm32-dmamux.c | 327 +++++++++++++++++++++++++++++++++++++++++++++
 3 files changed, 337 insertions(+)
 create mode 100644 drivers/dma/stm32-dmamux.c

diff --git a/drivers/dma/Kconfig b/drivers/dma/Kconfig
index fadc4d8..04e381b 100644
--- a/drivers/dma/Kconfig
+++ b/drivers/dma/Kconfig
@@ -483,6 +483,15 @@ config STM32_DMA
 	  If you have a board based on such a MCU and wish to use DMA say Y
 	  here.
 
+config STM32_DMAMUX
+	bool "STMicroelectronics STM32 dma multiplexer support"
+	depends on STM32_DMA || COMPILE_TEST
+	help
+	  Enable support for the on-chip DMA multiplexer on STMicroelectronics
+	  STM32 MCUs.
+	  If you have a board based on such a MCU and wish to use DMAMUX say Y
+	  here.
+
 config S3C24XX_DMAC
 	bool "Samsung S3C24XX DMA support"
 	depends on ARCH_S3C24XX || COMPILE_TEST
diff --git a/drivers/dma/Makefile b/drivers/dma/Makefile
index f08f8de..a145ad1 100644
--- a/drivers/dma/Makefile
+++ b/drivers/dma/Makefile
@@ -59,6 +59,7 @@ obj-$(CONFIG_RENESAS_DMA) += sh/
 obj-$(CONFIG_SIRF_DMA) += sirf-dma.o
 obj-$(CONFIG_STE_DMA40) += ste_dma40.o ste_dma40_ll.o
 obj-$(CONFIG_STM32_DMA) += stm32-dma.o
+obj-$(CONFIG_STM32_DMAMUX) += stm32-dmamux.o
 obj-$(CONFIG_S3C24XX_DMAC) += s3c24xx-dma.o
 obj-$(CONFIG_TXX9_DMAC) += txx9dmac.o
 obj-$(CONFIG_TEGRA20_APB_DMA) += tegra20-apb-dma.o
diff --git a/drivers/dma/stm32-dmamux.c b/drivers/dma/stm32-dmamux.c
new file mode 100644
index 0000000..22812e7
--- /dev/null
+++ b/drivers/dma/stm32-dmamux.c
@@ -0,0 +1,327 @@
+/*
+ *
+ * Copyright (C) STMicroelectronics SA 2017
+ * Author(s): M'boumba Cedric Madianga <cedric.madianga@gmail.com>
+ *            Pierre-Yves Mordret <pierre-yves.mordret@st.com>
+ *
+ * License terms: GPL V2.0.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more
+ * details.
+ *
+ * DMA Router driver for STM32 DMA MUX
+ *
+ * Based on TI DMA Crossbar driver
+ *
+ */
+
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/of_dma.h>
+#include <linux/reset.h>
+#include <linux/slab.h>
+#include <linux/spinlock.h>
+
+#define STM32_DMAMUX_CCR(x)		(0x4 * (x))
+#define STM32_DMAMUX_MAX_DMA_REQUESTS	32
+#define STM32_DMAMUX_MAX_REQUESTS	255
+
+struct stm32_dmamux {
+	u32 master;
+	u32 request;
+	u32 chan_id;
+};
+
+struct stm32_dmamux_data {
+	struct dma_router dmarouter;
+	struct clk *clk;
+	struct reset_control *rst;
+	void __iomem *iomem;
+	u32 dma_requests; /* Number of DMA requests connected to DMAMUX */
+	u32 dmamux_requests; /* Number of DMA requests routed toward DMAs */
+	spinlock_t lock; /* Protects register access */
+	unsigned long *dma_inuse; /* Used DMA channel */
+	u32 dma_reqs[]; /* Number of DMA Request per DMA masters.
+			 *  [0] holds number of DMA Masters.
+			 *  To be kept at very end end of this structure
+			 */
+};
+
+static inline u32 stm32_dmamux_read(void __iomem *iomem, u32 reg)
+{
+	return readl_relaxed(iomem + reg);
+}
+
+static inline void stm32_dmamux_write(void __iomem *iomem, u32 reg, u32 val)
+{
+	writel_relaxed(val, iomem + reg);
+}
+
+static void stm32_dmamux_free(struct device *dev, void *route_data)
+{
+	struct stm32_dmamux_data *dmamux = dev_get_drvdata(dev);
+	struct stm32_dmamux *mux = route_data;
+	unsigned long flags;
+
+	/* Clear dma request */
+	spin_lock_irqsave(&dmamux->lock, flags);
+
+	stm32_dmamux_write(dmamux->iomem, STM32_DMAMUX_CCR(mux->chan_id), 0);
+	clear_bit(mux->chan_id, dmamux->dma_inuse);
+
+	if (!IS_ERR(dmamux->clk))
+		clk_disable(dmamux->clk);
+
+	spin_unlock_irqrestore(&dmamux->lock, flags);
+
+	dev_dbg(dev, "Unmapping DMAMUX(%u) to DMA%u(%u)\n",
+		mux->request, mux->master, mux->chan_id);
+
+	kfree(mux);
+}
+
+static void *stm32_dmamux_route_allocate(struct of_phandle_args *dma_spec,
+					 struct of_dma *ofdma)
+{
+	struct platform_device *pdev = of_find_device_by_node(ofdma->of_node);
+	struct stm32_dmamux_data *dmamux = platform_get_drvdata(pdev);
+	struct stm32_dmamux *mux;
+	u32 i, min, max;
+	int ret;
+	unsigned long flags;
+
+	if (dma_spec->args_count != 3) {
+		dev_err(&pdev->dev, "invalid number of dma mux args\n");
+		return ERR_PTR(-EINVAL);
+	}
+
+	if (dma_spec->args[0] > dmamux->dmamux_requests) {
+		dev_err(&pdev->dev, "invalid mux request number: %d\n",
+			dma_spec->args[0]);
+		return ERR_PTR(-EINVAL);
+	}
+
+	mux = kzalloc(sizeof(*mux), GFP_KERNEL);
+	if (!mux)
+		return ERR_PTR(-ENOMEM);
+
+	spin_lock_irqsave(&dmamux->lock, flags);
+	mux->chan_id = find_first_zero_bit(dmamux->dma_inuse,
+					   dmamux->dma_requests);
+	set_bit(mux->chan_id, dmamux->dma_inuse);
+	spin_unlock_irqrestore(&dmamux->lock, flags);
+
+	if (mux->chan_id == dmamux->dma_requests) {
+		dev_err(&pdev->dev, "Run out of free DMA requests\n");
+		ret = -ENOMEM;
+		goto error;
+	}
+
+	/* Look for DMA Master */
+	for (i = 1, min = 0, max = dmamux->dma_reqs[i];
+	     i <= dmamux->dma_reqs[0];
+	     min += dmamux->dma_reqs[i], max += dmamux->dma_reqs[++i])
+		if (mux->chan_id < max)
+			break;
+	mux->master = i - 1;
+
+	/* The of_node_put() will be done in of_dma_router_xlate function */
+	dma_spec->np = of_parse_phandle(ofdma->of_node, "dma-masters", i - 1);
+	if (!dma_spec->np) {
+		dev_err(&pdev->dev, "can't get dma master\n");
+		ret = -EINVAL;
+		goto error;
+	}
+
+	/* Set dma request */
+	spin_lock_irqsave(&dmamux->lock, flags);
+	if (!IS_ERR(dmamux->clk)) {
+		ret = clk_enable(dmamux->clk);
+		if (ret < 0) {
+			spin_unlock_irqrestore(&dmamux->lock, flags);
+			dev_err(&pdev->dev, "clk_prep_enable issue: %d\n", ret);
+			goto error;
+		}
+	}
+	spin_unlock_irqrestore(&dmamux->lock, flags);
+
+	mux->request = dma_spec->args[0];
+
+	/*  craft DMA spec */
+	dma_spec->args[3] = dma_spec->args[2];
+	dma_spec->args[2] = dma_spec->args[1];
+	dma_spec->args[1] = 0;
+	dma_spec->args[0] = mux->chan_id - min;
+	dma_spec->args_count = 4;
+
+	stm32_dmamux_write(dmamux->iomem, STM32_DMAMUX_CCR(mux->chan_id),
+			   mux->request);
+	dev_dbg(&pdev->dev, "Mapping DMAMUX(%u) to DMA%u(%u)\n",
+		mux->request, mux->master, mux->chan_id);
+
+	return mux;
+
+error:
+	clear_bit(mux->chan_id, dmamux->dma_inuse);
+	kfree(mux);
+	return ERR_PTR(ret);
+}
+
+static const struct of_device_id stm32_stm32dma_master_match[] = {
+	{ .compatible = "st,stm32-dma", },
+	{},
+};
+
+static int stm32_dmamux_probe(struct platform_device *pdev)
+{
+	struct device_node *node = pdev->dev.of_node;
+	const struct of_device_id *match;
+	struct device_node *dma_node;
+	struct stm32_dmamux_data *stm32_dmamux;
+	struct resource *res;
+	void __iomem *iomem;
+	int i, count, ret;
+	u32 dma_req;
+
+	if (!node)
+		return -ENODEV;
+
+	count = device_property_read_u32_array(&pdev->dev, "dma-masters",
+					       NULL, 0);
+	if (count < 0) {
+		dev_err(&pdev->dev, "Can't get DMA master(s) node\n");
+		return -ENODEV;
+	}
+
+	stm32_dmamux = devm_kzalloc(&pdev->dev, sizeof(*stm32_dmamux) +
+				    sizeof(u32) * (count + 1), GFP_KERNEL);
+	if (!stm32_dmamux)
+		return -ENOMEM;
+
+	dma_req = 0;
+	for (i = 1; i <= count; i++) {
+		dma_node = of_parse_phandle(node, "dma-masters", i - 1);
+
+		match = of_match_node(stm32_stm32dma_master_match, dma_node);
+		if (!match) {
+			dev_err(&pdev->dev, "DMA master is not supported\n");
+			of_node_put(dma_node);
+			return -EINVAL;
+		}
+
+		if (of_property_read_u32(dma_node, "dma-requests",
+					 &stm32_dmamux->dma_reqs[i])) {
+			dev_info(&pdev->dev,
+				 "Missing MUX output information, using %u.\n",
+				 STM32_DMAMUX_MAX_DMA_REQUESTS);
+			stm32_dmamux->dma_reqs[i] =
+				STM32_DMAMUX_MAX_DMA_REQUESTS;
+		}
+		dma_req += stm32_dmamux->dma_reqs[i];
+		of_node_put(dma_node);
+	}
+
+	if (dma_req > STM32_DMAMUX_MAX_DMA_REQUESTS) {
+		dev_err(&pdev->dev, "Too many DMA Master Requests to manage\n");
+		return -ENODEV;
+	}
+
+	stm32_dmamux->dma_requests = dma_req;
+	stm32_dmamux->dma_reqs[0] = count;
+	stm32_dmamux->dma_inuse = devm_kcalloc(&pdev->dev,
+					       BITS_TO_LONGS(dma_req),
+					       sizeof(unsigned long),
+					       GFP_KERNEL);
+	if (!stm32_dmamux->dma_inuse)
+		return -ENOMEM;
+
+	if (device_property_read_u32(&pdev->dev, "dma-requests",
+				     &stm32_dmamux->dmamux_requests)) {
+		stm32_dmamux->dmamux_requests = STM32_DMAMUX_MAX_REQUESTS;
+		dev_warn(&pdev->dev, "DMAMUX defaulting on %u requests\n",
+			 stm32_dmamux->dmamux_requests);
+	}
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res)
+		return -ENODEV;
+
+	iomem = devm_ioremap_resource(&pdev->dev, res);
+	if (!iomem)
+		return -ENOMEM;
+
+	spin_lock_init(&stm32_dmamux->lock);
+
+	stm32_dmamux->clk = devm_clk_get(&pdev->dev, NULL);
+	if (IS_ERR(stm32_dmamux->clk)) {
+		ret = PTR_ERR(stm32_dmamux->clk);
+		if (ret == -EPROBE_DEFER)
+			dev_info(&pdev->dev, "Missing controller clock\n");
+		return ret;
+	}
+
+	stm32_dmamux->rst = devm_reset_control_get(&pdev->dev, NULL);
+	if (!IS_ERR(stm32_dmamux->rst)) {
+		reset_control_assert(stm32_dmamux->rst);
+		udelay(2);
+		reset_control_deassert(stm32_dmamux->rst);
+	}
+
+	stm32_dmamux->iomem = iomem;
+	stm32_dmamux->dmarouter.dev = &pdev->dev;
+	stm32_dmamux->dmarouter.route_free = stm32_dmamux_free;
+
+	platform_set_drvdata(pdev, stm32_dmamux);
+
+	if (!IS_ERR(stm32_dmamux->clk)) {
+		ret = clk_prepare_enable(stm32_dmamux->clk);
+		if (ret < 0) {
+			dev_err(&pdev->dev, "clk_prep_enable error: %d\n", ret);
+			return ret;
+		}
+	}
+
+	/* Reset the dmamux */
+	for (i = 0; i < stm32_dmamux->dma_requests; i++)
+		stm32_dmamux_write(stm32_dmamux->iomem, STM32_DMAMUX_CCR(i), 0);
+
+	if (!IS_ERR(stm32_dmamux->clk))
+		clk_disable(stm32_dmamux->clk);
+
+	return of_dma_router_register(node, stm32_dmamux_route_allocate,
+				     &stm32_dmamux->dmarouter);
+}
+
+static const struct of_device_id stm32_dmamux_match[] = {
+	{ .compatible = "st,stm32h7-dmamux" },
+	{},
+};
+
+static struct platform_driver stm32_dmamux_driver = {
+	.probe	= stm32_dmamux_probe,
+	.driver = {
+		.name = "stm32-dmamux",
+		.of_match_table = stm32_dmamux_match,
+	},
+};
+
+static int __init stm32_dmamux_init(void)
+{
+	return platform_driver_register(&stm32_dmamux_driver);
+}
+arch_initcall(stm32_dmamux_init);
+
+MODULE_DESCRIPTION("DMA Router driver for STM32 DMA MUX");
+MODULE_AUTHOR("M'boumba Cedric Madianga <cedric.madianga@gmail.com>");
+MODULE_AUTHOR("Pierre-Yves Mordret <pierre-yves.mordret@st.com>");
+MODULE_LICENSE("GPL v2");
-- 
2.7.4

[RESEND PATCH v5 2/4] dmaengine: Add STM32 DMAMUX driver

[Pierre-Yves MORDRET]

This patch implements the STM32 DMAMUX driver.

The DMAMUX request multiplexer allows routing a DMA request line between
the peripherals and the DMA controllers of the product. The routing
function is ensured by a programmable multi-channel DMA request line
multiplexer. Each channel selects a unique DMA request line,
unconditionally or synchronously with events from its DMAMUX
synchronization inputs. The DMAMUX may also be used as a DMA request
generator from programmable events on its input trigger signals

Signed-off-by: M'boumba Cedric Madianga <cedric.madianga@gmail.com>
Signed-off-by: Pierre-Yves MORDRET <pierre-yves.mordret@st.com>
---
 Version history:
    v5:
        * Set selected channel ID within a lock to avoid race condition.
          Release if any error occurs
    v4:
        * Get rid of st,dmamux property and custom API between STM32
          DMAMUX and DMA.
          DMAMUX will read DMA masters from Device Tree from now on.
          Merely one DMAMUX node is needed now.
        * Only STM32 DMA are allowed to be connected onto DMAMUX
        * channelID is computed locally within the driver and crafted in
          dma_psec to be passed toward DMA master.
          DMAMUX router sorts out which DMA master will serve the
          request automatically.
        * This version forbids the use of DMA in standalone and DMAMUX at
          the same time : all clients need to be connected either on DMA
          or DMAMUX ; no mix up
    v3:
        * change compatible to st,stm32h7-dmamux to be mode SoC specific
    v2:
        * Dynamic channelID allocation.
        * Change of_property_... by device_property.
        * New clock management.
        * DMAMUX Configuration API.
---
---
 drivers/dma/Kconfig        |   9 ++
 drivers/dma/Makefile       |   1 +
 drivers/dma/stm32-dmamux.c | 327 +++++++++++++++++++++++++++++++++++++++++++++
 3 files changed, 337 insertions(+)
 create mode 100644 drivers/dma/stm32-dmamux.c

diff --git a/drivers/dma/Kconfig b/drivers/dma/Kconfig
index fadc4d8..04e381b 100644
--- a/drivers/dma/Kconfig
+++ b/drivers/dma/Kconfig
@@ -483,6 +483,15 @@ config STM32_DMA
 	  If you have a board based on such a MCU and wish to use DMA say Y
 	  here.
 
+config STM32_DMAMUX
+	bool "STMicroelectronics STM32 dma multiplexer support"
+	depends on STM32_DMA || COMPILE_TEST
+	help
+	  Enable support for the on-chip DMA multiplexer on STMicroelectronics
+	  STM32 MCUs.
+	  If you have a board based on such a MCU and wish to use DMAMUX say Y
+	  here.
+
 config S3C24XX_DMAC
 	bool "Samsung S3C24XX DMA support"
 	depends on ARCH_S3C24XX || COMPILE_TEST
diff --git a/drivers/dma/Makefile b/drivers/dma/Makefile
index f08f8de..a145ad1 100644
--- a/drivers/dma/Makefile
+++ b/drivers/dma/Makefile
@@ -59,6 +59,7 @@ obj-$(CONFIG_RENESAS_DMA) += sh/
 obj-$(CONFIG_SIRF_DMA) += sirf-dma.o
 obj-$(CONFIG_STE_DMA40) += ste_dma40.o ste_dma40_ll.o
 obj-$(CONFIG_STM32_DMA) += stm32-dma.o
+obj-$(CONFIG_STM32_DMAMUX) += stm32-dmamux.o
 obj-$(CONFIG_S3C24XX_DMAC) += s3c24xx-dma.o
 obj-$(CONFIG_TXX9_DMAC) += txx9dmac.o
 obj-$(CONFIG_TEGRA20_APB_DMA) += tegra20-apb-dma.o
diff --git a/drivers/dma/stm32-dmamux.c b/drivers/dma/stm32-dmamux.c
new file mode 100644
index 0000000..22812e7
--- /dev/null
+++ b/drivers/dma/stm32-dmamux.c
@@ -0,0 +1,327 @@
+/*
+ *
+ * Copyright (C) STMicroelectronics SA 2017
+ * Author(s): M'boumba Cedric Madianga <cedric.madianga@gmail.com>
+ *            Pierre-Yves Mordret <pierre-yves.mordret@st.com>
+ *
+ * License terms: GPL V2.0.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more
+ * details.
+ *
+ * DMA Router driver for STM32 DMA MUX
+ *
+ * Based on TI DMA Crossbar driver
+ *
+ */
+
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/of_dma.h>
+#include <linux/reset.h>
+#include <linux/slab.h>
+#include <linux/spinlock.h>
+
+#define STM32_DMAMUX_CCR(x)		(0x4 * (x))
+#define STM32_DMAMUX_MAX_DMA_REQUESTS	32
+#define STM32_DMAMUX_MAX_REQUESTS	255
+
+struct stm32_dmamux {
+	u32 master;
+	u32 request;
+	u32 chan_id;
+};
+
+struct stm32_dmamux_data {
+	struct dma_router dmarouter;
+	struct clk *clk;
+	struct reset_control *rst;
+	void __iomem *iomem;
+	u32 dma_requests; /* Number of DMA requests connected to DMAMUX */
+	u32 dmamux_requests; /* Number of DMA requests routed toward DMAs */
+	spinlock_t lock; /* Protects register access */
+	unsigned long *dma_inuse; /* Used DMA channel */
+	u32 dma_reqs[]; /* Number of DMA Request per DMA masters.
+			 *  [0] holds number of DMA Masters.
+			 *  To be kept at very end end of this structure
+			 */
+};
+
+static inline u32 stm32_dmamux_read(void __iomem *iomem, u32 reg)
+{
+	return readl_relaxed(iomem + reg);
+}
+
+static inline void stm32_dmamux_write(void __iomem *iomem, u32 reg, u32 val)
+{
+	writel_relaxed(val, iomem + reg);
+}
+
+static void stm32_dmamux_free(struct device *dev, void *route_data)
+{
+	struct stm32_dmamux_data *dmamux = dev_get_drvdata(dev);
+	struct stm32_dmamux *mux = route_data;
+	unsigned long flags;
+
+	/* Clear dma request */
+	spin_lock_irqsave(&dmamux->lock, flags);
+
+	stm32_dmamux_write(dmamux->iomem, STM32_DMAMUX_CCR(mux->chan_id), 0);
+	clear_bit(mux->chan_id, dmamux->dma_inuse);
+
+	if (!IS_ERR(dmamux->clk))
+		clk_disable(dmamux->clk);
+
+	spin_unlock_irqrestore(&dmamux->lock, flags);
+
+	dev_dbg(dev, "Unmapping DMAMUX(%u) to DMA%u(%u)\n",
+		mux->request, mux->master, mux->chan_id);
+
+	kfree(mux);
+}
+
+static void *stm32_dmamux_route_allocate(struct of_phandle_args *dma_spec,
+					 struct of_dma *ofdma)
+{
+	struct platform_device *pdev = of_find_device_by_node(ofdma->of_node);
+	struct stm32_dmamux_data *dmamux = platform_get_drvdata(pdev);
+	struct stm32_dmamux *mux;
+	u32 i, min, max;
+	int ret;
+	unsigned long flags;
+
+	if (dma_spec->args_count != 3) {
+		dev_err(&pdev->dev, "invalid number of dma mux args\n");
+		return ERR_PTR(-EINVAL);
+	}
+
+	if (dma_spec->args[0] > dmamux->dmamux_requests) {
+		dev_err(&pdev->dev, "invalid mux request number: %d\n",
+			dma_spec->args[0]);
+		return ERR_PTR(-EINVAL);
+	}
+
+	mux = kzalloc(sizeof(*mux), GFP_KERNEL);
+	if (!mux)
+		return ERR_PTR(-ENOMEM);
+
+	spin_lock_irqsave(&dmamux->lock, flags);
+	mux->chan_id = find_first_zero_bit(dmamux->dma_inuse,
+					   dmamux->dma_requests);
+	set_bit(mux->chan_id, dmamux->dma_inuse);
+	spin_unlock_irqrestore(&dmamux->lock, flags);
+
+	if (mux->chan_id == dmamux->dma_requests) {
+		dev_err(&pdev->dev, "Run out of free DMA requests\n");
+		ret = -ENOMEM;
+		goto error;
+	}
+
+	/* Look for DMA Master */
+	for (i = 1, min = 0, max = dmamux->dma_reqs[i];
+	     i <= dmamux->dma_reqs[0];
+	     min += dmamux->dma_reqs[i], max += dmamux->dma_reqs[++i])
+		if (mux->chan_id < max)
+			break;
+	mux->master = i - 1;
+
+	/* The of_node_put() will be done in of_dma_router_xlate function */
+	dma_spec->np = of_parse_phandle(ofdma->of_node, "dma-masters", i - 1);
+	if (!dma_spec->np) {
+		dev_err(&pdev->dev, "can't get dma master\n");
+		ret = -EINVAL;
+		goto error;
+	}
+
+	/* Set dma request */
+	spin_lock_irqsave(&dmamux->lock, flags);
+	if (!IS_ERR(dmamux->clk)) {
+		ret = clk_enable(dmamux->clk);
+		if (ret < 0) {
+			spin_unlock_irqrestore(&dmamux->lock, flags);
+			dev_err(&pdev->dev, "clk_prep_enable issue: %d\n", ret);
+			goto error;
+		}
+	}
+	spin_unlock_irqrestore(&dmamux->lock, flags);
+
+	mux->request = dma_spec->args[0];
+
+	/*  craft DMA spec */
+	dma_spec->args[3] = dma_spec->args[2];
+	dma_spec->args[2] = dma_spec->args[1];
+	dma_spec->args[1] = 0;
+	dma_spec->args[0] = mux->chan_id - min;
+	dma_spec->args_count = 4;
+
+	stm32_dmamux_write(dmamux->iomem, STM32_DMAMUX_CCR(mux->chan_id),
+			   mux->request);
+	dev_dbg(&pdev->dev, "Mapping DMAMUX(%u) to DMA%u(%u)\n",
+		mux->request, mux->master, mux->chan_id);
+
+	return mux;
+
+error:
+	clear_bit(mux->chan_id, dmamux->dma_inuse);
+	kfree(mux);
+	return ERR_PTR(ret);
+}
+
+static const struct of_device_id stm32_stm32dma_master_match[] = {
+	{ .compatible = "st,stm32-dma", },
+	{},
+};
+
+static int stm32_dmamux_probe(struct platform_device *pdev)
+{
+	struct device_node *node = pdev->dev.of_node;
+	const struct of_device_id *match;
+	struct device_node *dma_node;
+	struct stm32_dmamux_data *stm32_dmamux;
+	struct resource *res;
+	void __iomem *iomem;
+	int i, count, ret;
+	u32 dma_req;
+
+	if (!node)
+		return -ENODEV;
+
+	count = device_property_read_u32_array(&pdev->dev, "dma-masters",
+					       NULL, 0);
+	if (count < 0) {
+		dev_err(&pdev->dev, "Can't get DMA master(s) node\n");
+		return -ENODEV;
+	}
+
+	stm32_dmamux = devm_kzalloc(&pdev->dev, sizeof(*stm32_dmamux) +
+				    sizeof(u32) * (count + 1), GFP_KERNEL);
+	if (!stm32_dmamux)
+		return -ENOMEM;
+
+	dma_req = 0;
+	for (i = 1; i <= count; i++) {
+		dma_node = of_parse_phandle(node, "dma-masters", i - 1);
+
+		match = of_match_node(stm32_stm32dma_master_match, dma_node);
+		if (!match) {
+			dev_err(&pdev->dev, "DMA master is not supported\n");
+			of_node_put(dma_node);
+			return -EINVAL;
+		}
+
+		if (of_property_read_u32(dma_node, "dma-requests",
+					 &stm32_dmamux->dma_reqs[i])) {
+			dev_info(&pdev->dev,
+				 "Missing MUX output information, using %u.\n",
+				 STM32_DMAMUX_MAX_DMA_REQUESTS);
+			stm32_dmamux->dma_reqs[i] =
+				STM32_DMAMUX_MAX_DMA_REQUESTS;
+		}
+		dma_req += stm32_dmamux->dma_reqs[i];
+		of_node_put(dma_node);
+	}
+
+	if (dma_req > STM32_DMAMUX_MAX_DMA_REQUESTS) {
+		dev_err(&pdev->dev, "Too many DMA Master Requests to manage\n");
+		return -ENODEV;
+	}
+
+	stm32_dmamux->dma_requests = dma_req;
+	stm32_dmamux->dma_reqs[0] = count;
+	stm32_dmamux->dma_inuse = devm_kcalloc(&pdev->dev,
+					       BITS_TO_LONGS(dma_req),
+					       sizeof(unsigned long),
+					       GFP_KERNEL);
+	if (!stm32_dmamux->dma_inuse)
+		return -ENOMEM;
+
+	if (device_property_read_u32(&pdev->dev, "dma-requests",
+				     &stm32_dmamux->dmamux_requests)) {
+		stm32_dmamux->dmamux_requests = STM32_DMAMUX_MAX_REQUESTS;
+		dev_warn(&pdev->dev, "DMAMUX defaulting on %u requests\n",
+			 stm32_dmamux->dmamux_requests);
+	}
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res)
+		return -ENODEV;
+
+	iomem = devm_ioremap_resource(&pdev->dev, res);
+	if (!iomem)
+		return -ENOMEM;
+
+	spin_lock_init(&stm32_dmamux->lock);
+
+	stm32_dmamux->clk = devm_clk_get(&pdev->dev, NULL);
+	if (IS_ERR(stm32_dmamux->clk)) {
+		ret = PTR_ERR(stm32_dmamux->clk);
+		if (ret == -EPROBE_DEFER)
+			dev_info(&pdev->dev, "Missing controller clock\n");
+		return ret;
+	}
+
+	stm32_dmamux->rst = devm_reset_control_get(&pdev->dev, NULL);
+	if (!IS_ERR(stm32_dmamux->rst)) {
+		reset_control_assert(stm32_dmamux->rst);
+		udelay(2);
+		reset_control_deassert(stm32_dmamux->rst);
+	}
+
+	stm32_dmamux->iomem = iomem;
+	stm32_dmamux->dmarouter.dev = &pdev->dev;
+	stm32_dmamux->dmarouter.route_free = stm32_dmamux_free;
+
+	platform_set_drvdata(pdev, stm32_dmamux);
+
+	if (!IS_ERR(stm32_dmamux->clk)) {
+		ret = clk_prepare_enable(stm32_dmamux->clk);
+		if (ret < 0) {
+			dev_err(&pdev->dev, "clk_prep_enable error: %d\n", ret);
+			return ret;
+		}
+	}
+
+	/* Reset the dmamux */
+	for (i = 0; i < stm32_dmamux->dma_requests; i++)
+		stm32_dmamux_write(stm32_dmamux->iomem, STM32_DMAMUX_CCR(i), 0);
+
+	if (!IS_ERR(stm32_dmamux->clk))
+		clk_disable(stm32_dmamux->clk);
+
+	return of_dma_router_register(node, stm32_dmamux_route_allocate,
+				     &stm32_dmamux->dmarouter);
+}
+
+static const struct of_device_id stm32_dmamux_match[] = {
+	{ .compatible = "st,stm32h7-dmamux" },
+	{},
+};
+
+static struct platform_driver stm32_dmamux_driver = {
+	.probe	= stm32_dmamux_probe,
+	.driver = {
+		.name = "stm32-dmamux",
+		.of_match_table = stm32_dmamux_match,
+	},
+};
+
+static int __init stm32_dmamux_init(void)
+{
+	return platform_driver_register(&stm32_dmamux_driver);
+}
+arch_initcall(stm32_dmamux_init);
+
+MODULE_DESCRIPTION("DMA Router driver for STM32 DMA MUX");
+MODULE_AUTHOR("M'boumba Cedric Madianga <cedric.madianga@gmail.com>");
+MODULE_AUTHOR("Pierre-Yves Mordret <pierre-yves.mordret@st.com>");
+MODULE_LICENSE("GPL v2");
-- 
2.7.4

[RESEND PATCH v5 2/4] dmaengine: Add STM32 DMAMUX driver

[Pierre-Yves MORDRET]

This patch implements the STM32 DMAMUX driver.

The DMAMUX request multiplexer allows routing a DMA request line between
the peripherals and the DMA controllers of the product. The routing
function is ensured by a programmable multi-channel DMA request line
multiplexer. Each channel selects a unique DMA request line,
unconditionally or synchronously with events from its DMAMUX
synchronization inputs. The DMAMUX may also be used as a DMA request
generator from programmable events on its input trigger signals

Signed-off-by: M'boumba Cedric Madianga <cedric.madianga@gmail.com>
Signed-off-by: Pierre-Yves MORDRET <pierre-yves.mordret@st.com>
---
 Version history:
    v5:
        * Set selected channel ID within a lock to avoid race condition.
          Release if any error occurs
    v4:
        * Get rid of st,dmamux property and custom API between STM32
          DMAMUX and DMA.
          DMAMUX will read DMA masters from Device Tree from now on.
          Merely one DMAMUX node is needed now.
        * Only STM32 DMA are allowed to be connected onto DMAMUX
        * channelID is computed locally within the driver and crafted in
          dma_psec to be passed toward DMA master.
          DMAMUX router sorts out which DMA master will serve the
          request automatically.
        * This version forbids the use of DMA in standalone and DMAMUX at
          the same time : all clients need to be connected either on DMA
          or DMAMUX ; no mix up
    v3:
        * change compatible to st,stm32h7-dmamux to be mode SoC specific
    v2:
        * Dynamic channelID allocation.
        * Change of_property_... by device_property.
        * New clock management.
        * DMAMUX Configuration API.
---
---
 drivers/dma/Kconfig        |   9 ++
 drivers/dma/Makefile       |   1 +
 drivers/dma/stm32-dmamux.c | 327 +++++++++++++++++++++++++++++++++++++++++++++
 3 files changed, 337 insertions(+)
 create mode 100644 drivers/dma/stm32-dmamux.c

diff --git a/drivers/dma/Kconfig b/drivers/dma/Kconfig
index fadc4d8..04e381b 100644
--- a/drivers/dma/Kconfig
+++ b/drivers/dma/Kconfig
@@ -483,6 +483,15 @@ config STM32_DMA
 	  If you have a board based on such a MCU and wish to use DMA say Y
 	  here.
 
+config STM32_DMAMUX
+	bool "STMicroelectronics STM32 dma multiplexer support"
+	depends on STM32_DMA || COMPILE_TEST
+	help
+	  Enable support for the on-chip DMA multiplexer on STMicroelectronics
+	  STM32 MCUs.
+	  If you have a board based on such a MCU and wish to use DMAMUX say Y
+	  here.
+
 config S3C24XX_DMAC
 	bool "Samsung S3C24XX DMA support"
 	depends on ARCH_S3C24XX || COMPILE_TEST
diff --git a/drivers/dma/Makefile b/drivers/dma/Makefile
index f08f8de..a145ad1 100644
--- a/drivers/dma/Makefile
+++ b/drivers/dma/Makefile
@@ -59,6 +59,7 @@ obj-$(CONFIG_RENESAS_DMA) += sh/
 obj-$(CONFIG_SIRF_DMA) += sirf-dma.o
 obj-$(CONFIG_STE_DMA40) += ste_dma40.o ste_dma40_ll.o
 obj-$(CONFIG_STM32_DMA) += stm32-dma.o
+obj-$(CONFIG_STM32_DMAMUX) += stm32-dmamux.o
 obj-$(CONFIG_S3C24XX_DMAC) += s3c24xx-dma.o
 obj-$(CONFIG_TXX9_DMAC) += txx9dmac.o
 obj-$(CONFIG_TEGRA20_APB_DMA) += tegra20-apb-dma.o
diff --git a/drivers/dma/stm32-dmamux.c b/drivers/dma/stm32-dmamux.c
new file mode 100644
index 0000000..22812e7
--- /dev/null
+++ b/drivers/dma/stm32-dmamux.c
@@ -0,0 +1,327 @@
+/*
+ *
+ * Copyright (C) STMicroelectronics SA 2017
+ * Author(s): M'boumba Cedric Madianga <cedric.madianga@gmail.com>
+ *            Pierre-Yves Mordret <pierre-yves.mordret@st.com>
+ *
+ * License terms: GPL V2.0.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more
+ * details.
+ *
+ * DMA Router driver for STM32 DMA MUX
+ *
+ * Based on TI DMA Crossbar driver
+ *
+ */
+
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/of_dma.h>
+#include <linux/reset.h>
+#include <linux/slab.h>
+#include <linux/spinlock.h>
+
+#define STM32_DMAMUX_CCR(x)		(0x4 * (x))
+#define STM32_DMAMUX_MAX_DMA_REQUESTS	32
+#define STM32_DMAMUX_MAX_REQUESTS	255
+
+struct stm32_dmamux {
+	u32 master;
+	u32 request;
+	u32 chan_id;
+};
+
+struct stm32_dmamux_data {
+	struct dma_router dmarouter;
+	struct clk *clk;
+	struct reset_control *rst;
+	void __iomem *iomem;
+	u32 dma_requests; /* Number of DMA requests connected to DMAMUX */
+	u32 dmamux_requests; /* Number of DMA requests routed toward DMAs */
+	spinlock_t lock; /* Protects register access */
+	unsigned long *dma_inuse; /* Used DMA channel */
+	u32 dma_reqs[]; /* Number of DMA Request per DMA masters.
+			 *  [0] holds number of DMA Masters.
+			 *  To be kept at very end end of this structure
+			 */
+};
+
+static inline u32 stm32_dmamux_read(void __iomem *iomem, u32 reg)
+{
+	return readl_relaxed(iomem + reg);
+}
+
+static inline void stm32_dmamux_write(void __iomem *iomem, u32 reg, u32 val)
+{
+	writel_relaxed(val, iomem + reg);
+}
+
+static void stm32_dmamux_free(struct device *dev, void *route_data)
+{
+	struct stm32_dmamux_data *dmamux = dev_get_drvdata(dev);
+	struct stm32_dmamux *mux = route_data;
+	unsigned long flags;
+
+	/* Clear dma request */
+	spin_lock_irqsave(&dmamux->lock, flags);
+
+	stm32_dmamux_write(dmamux->iomem, STM32_DMAMUX_CCR(mux->chan_id), 0);
+	clear_bit(mux->chan_id, dmamux->dma_inuse);
+
+	if (!IS_ERR(dmamux->clk))
+		clk_disable(dmamux->clk);
+
+	spin_unlock_irqrestore(&dmamux->lock, flags);
+
+	dev_dbg(dev, "Unmapping DMAMUX(%u) to DMA%u(%u)\n",
+		mux->request, mux->master, mux->chan_id);
+
+	kfree(mux);
+}
+
+static void *stm32_dmamux_route_allocate(struct of_phandle_args *dma_spec,
+					 struct of_dma *ofdma)
+{
+	struct platform_device *pdev = of_find_device_by_node(ofdma->of_node);
+	struct stm32_dmamux_data *dmamux = platform_get_drvdata(pdev);
+	struct stm32_dmamux *mux;
+	u32 i, min, max;
+	int ret;
+	unsigned long flags;
+
+	if (dma_spec->args_count != 3) {
+		dev_err(&pdev->dev, "invalid number of dma mux args\n");
+		return ERR_PTR(-EINVAL);
+	}
+
+	if (dma_spec->args[0] > dmamux->dmamux_requests) {
+		dev_err(&pdev->dev, "invalid mux request number: %d\n",
+			dma_spec->args[0]);
+		return ERR_PTR(-EINVAL);
+	}
+
+	mux = kzalloc(sizeof(*mux), GFP_KERNEL);
+	if (!mux)
+		return ERR_PTR(-ENOMEM);
+
+	spin_lock_irqsave(&dmamux->lock, flags);
+	mux->chan_id = find_first_zero_bit(dmamux->dma_inuse,
+					   dmamux->dma_requests);
+	set_bit(mux->chan_id, dmamux->dma_inuse);
+	spin_unlock_irqrestore(&dmamux->lock, flags);
+
+	if (mux->chan_id == dmamux->dma_requests) {
+		dev_err(&pdev->dev, "Run out of free DMA requests\n");
+		ret = -ENOMEM;
+		goto error;
+	}
+
+	/* Look for DMA Master */
+	for (i = 1, min = 0, max = dmamux->dma_reqs[i];
+	     i <= dmamux->dma_reqs[0];
+	     min += dmamux->dma_reqs[i], max += dmamux->dma_reqs[++i])
+		if (mux->chan_id < max)
+			break;
+	mux->master = i - 1;
+
+	/* The of_node_put() will be done in of_dma_router_xlate function */
+	dma_spec->np = of_parse_phandle(ofdma->of_node, "dma-masters", i - 1);
+	if (!dma_spec->np) {
+		dev_err(&pdev->dev, "can't get dma master\n");
+		ret = -EINVAL;
+		goto error;
+	}
+
+	/* Set dma request */
+	spin_lock_irqsave(&dmamux->lock, flags);
+	if (!IS_ERR(dmamux->clk)) {
+		ret = clk_enable(dmamux->clk);
+		if (ret < 0) {
+			spin_unlock_irqrestore(&dmamux->lock, flags);
+			dev_err(&pdev->dev, "clk_prep_enable issue: %d\n", ret);
+			goto error;
+		}
+	}
+	spin_unlock_irqrestore(&dmamux->lock, flags);
+
+	mux->request = dma_spec->args[0];
+
+	/*  craft DMA spec */
+	dma_spec->args[3] = dma_spec->args[2];
+	dma_spec->args[2] = dma_spec->args[1];
+	dma_spec->args[1] = 0;
+	dma_spec->args[0] = mux->chan_id - min;
+	dma_spec->args_count = 4;
+
+	stm32_dmamux_write(dmamux->iomem, STM32_DMAMUX_CCR(mux->chan_id),
+			   mux->request);
+	dev_dbg(&pdev->dev, "Mapping DMAMUX(%u) to DMA%u(%u)\n",
+		mux->request, mux->master, mux->chan_id);
+
+	return mux;
+
+error:
+	clear_bit(mux->chan_id, dmamux->dma_inuse);
+	kfree(mux);
+	return ERR_PTR(ret);
+}
+
+static const struct of_device_id stm32_stm32dma_master_match[] = {
+	{ .compatible = "st,stm32-dma", },
+	{},
+};
+
+static int stm32_dmamux_probe(struct platform_device *pdev)
+{
+	struct device_node *node = pdev->dev.of_node;
+	const struct of_device_id *match;
+	struct device_node *dma_node;
+	struct stm32_dmamux_data *stm32_dmamux;
+	struct resource *res;
+	void __iomem *iomem;
+	int i, count, ret;
+	u32 dma_req;
+
+	if (!node)
+		return -ENODEV;
+
+	count = device_property_read_u32_array(&pdev->dev, "dma-masters",
+					       NULL, 0);
+	if (count < 0) {
+		dev_err(&pdev->dev, "Can't get DMA master(s) node\n");
+		return -ENODEV;
+	}
+
+	stm32_dmamux = devm_kzalloc(&pdev->dev, sizeof(*stm32_dmamux) +
+				    sizeof(u32) * (count + 1), GFP_KERNEL);
+	if (!stm32_dmamux)
+		return -ENOMEM;
+
+	dma_req = 0;
+	for (i = 1; i <= count; i++) {
+		dma_node = of_parse_phandle(node, "dma-masters", i - 1);
+
+		match = of_match_node(stm32_stm32dma_master_match, dma_node);
+		if (!match) {
+			dev_err(&pdev->dev, "DMA master is not supported\n");
+			of_node_put(dma_node);
+			return -EINVAL;
+		}
+
+		if (of_property_read_u32(dma_node, "dma-requests",
+					 &stm32_dmamux->dma_reqs[i])) {
+			dev_info(&pdev->dev,
+				 "Missing MUX output information, using %u.\n",
+				 STM32_DMAMUX_MAX_DMA_REQUESTS);
+			stm32_dmamux->dma_reqs[i] =
+				STM32_DMAMUX_MAX_DMA_REQUESTS;
+		}
+		dma_req += stm32_dmamux->dma_reqs[i];
+		of_node_put(dma_node);
+	}
+
+	if (dma_req > STM32_DMAMUX_MAX_DMA_REQUESTS) {
+		dev_err(&pdev->dev, "Too many DMA Master Requests to manage\n");
+		return -ENODEV;
+	}
+
+	stm32_dmamux->dma_requests = dma_req;
+	stm32_dmamux->dma_reqs[0] = count;
+	stm32_dmamux->dma_inuse = devm_kcalloc(&pdev->dev,
+					       BITS_TO_LONGS(dma_req),
+					       sizeof(unsigned long),
+					       GFP_KERNEL);
+	if (!stm32_dmamux->dma_inuse)
+		return -ENOMEM;
+
+	if (device_property_read_u32(&pdev->dev, "dma-requests",
+				     &stm32_dmamux->dmamux_requests)) {
+		stm32_dmamux->dmamux_requests = STM32_DMAMUX_MAX_REQUESTS;
+		dev_warn(&pdev->dev, "DMAMUX defaulting on %u requests\n",
+			 stm32_dmamux->dmamux_requests);
+	}
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res)
+		return -ENODEV;
+
+	iomem = devm_ioremap_resource(&pdev->dev, res);
+	if (!iomem)
+		return -ENOMEM;
+
+	spin_lock_init(&stm32_dmamux->lock);
+
+	stm32_dmamux->clk = devm_clk_get(&pdev->dev, NULL);
+	if (IS_ERR(stm32_dmamux->clk)) {
+		ret = PTR_ERR(stm32_dmamux->clk);
+		if (ret == -EPROBE_DEFER)
+			dev_info(&pdev->dev, "Missing controller clock\n");
+		return ret;
+	}
+
+	stm32_dmamux->rst = devm_reset_control_get(&pdev->dev, NULL);
+	if (!IS_ERR(stm32_dmamux->rst)) {
+		reset_control_assert(stm32_dmamux->rst);
+		udelay(2);
+		reset_control_deassert(stm32_dmamux->rst);
+	}
+
+	stm32_dmamux->iomem = iomem;
+	stm32_dmamux->dmarouter.dev = &pdev->dev;
+	stm32_dmamux->dmarouter.route_free = stm32_dmamux_free;
+
+	platform_set_drvdata(pdev, stm32_dmamux);
+
+	if (!IS_ERR(stm32_dmamux->clk)) {
+		ret = clk_prepare_enable(stm32_dmamux->clk);
+		if (ret < 0) {
+			dev_err(&pdev->dev, "clk_prep_enable error: %d\n", ret);
+			return ret;
+		}
+	}
+
+	/* Reset the dmamux */
+	for (i = 0; i < stm32_dmamux->dma_requests; i++)
+		stm32_dmamux_write(stm32_dmamux->iomem, STM32_DMAMUX_CCR(i), 0);
+
+	if (!IS_ERR(stm32_dmamux->clk))
+		clk_disable(stm32_dmamux->clk);
+
+	return of_dma_router_register(node, stm32_dmamux_route_allocate,
+				     &stm32_dmamux->dmarouter);
+}
+
+static const struct of_device_id stm32_dmamux_match[] = {
+	{ .compatible = "st,stm32h7-dmamux" },
+	{},
+};
+
+static struct platform_driver stm32_dmamux_driver = {
+	.probe	= stm32_dmamux_probe,
+	.driver = {
+		.name = "stm32-dmamux",
+		.of_match_table = stm32_dmamux_match,
+	},
+};
+
+static int __init stm32_dmamux_init(void)
+{
+	return platform_driver_register(&stm32_dmamux_driver);
+}
+arch_initcall(stm32_dmamux_init);
+
+MODULE_DESCRIPTION("DMA Router driver for STM32 DMA MUX");
+MODULE_AUTHOR("M'boumba Cedric Madianga <cedric.madianga@gmail.com>");
+MODULE_AUTHOR("Pierre-Yves Mordret <pierre-yves.mordret@st.com>");
+MODULE_LICENSE("GPL v2");
-- 
2.7.4

Re: [RESEND PATCH v5 2/4] dmaengine: Add STM32 DMAMUX driver

[Peter Ujfalusi]




Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki. Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki

On 2017-09-22 10:31, Pierre-Yves MORDRET wrote:
> This patch implements the STM32 DMAMUX driver.
> 
> The DMAMUX request multiplexer allows routing a DMA request line between
> the peripherals and the DMA controllers of the product. The routing
> function is ensured by a programmable multi-channel DMA request line
> multiplexer. Each channel selects a unique DMA request line,
> unconditionally or synchronously with events from its DMAMUX
> synchronization inputs. The DMAMUX may also be used as a DMA request
> generator from programmable events on its input trigger signals
> 
> Signed-off-by: M'boumba Cedric Madianga <cedric.madianga@gmail.com>
> Signed-off-by: Pierre-Yves MORDRET <pierre-yves.mordret@st.com>

Reviewed-by: Peter Ujfalusi <peter.ujfalusi@ti.com>

> ---
>  Version history:
>     v5:
>         * Set selected channel ID within a lock to avoid race condition.
>           Release if any error occurs
>     v4:
>         * Get rid of st,dmamux property and custom API between STM32
>           DMAMUX and DMA.
>           DMAMUX will read DMA masters from Device Tree from now on.
>           Merely one DMAMUX node is needed now.
>         * Only STM32 DMA are allowed to be connected onto DMAMUX
>         * channelID is computed locally within the driver and crafted in
>           dma_psec to be passed toward DMA master.
>           DMAMUX router sorts out which DMA master will serve the
>           request automatically.
>         * This version forbids the use of DMA in standalone and DMAMUX at
>           the same time : all clients need to be connected either on DMA
>           or DMAMUX ; no mix up
>     v3:
>         * change compatible to st,stm32h7-dmamux to be mode SoC specific
>     v2:
>         * Dynamic channelID allocation.
>         * Change of_property_... by device_property.
>         * New clock management.
>         * DMAMUX Configuration API.
> ---
> ---
>  drivers/dma/Kconfig        |   9 ++
>  drivers/dma/Makefile       |   1 +
>  drivers/dma/stm32-dmamux.c | 327 +++++++++++++++++++++++++++++++++++++++++++++
>  3 files changed, 337 insertions(+)
>  create mode 100644 drivers/dma/stm32-dmamux.c
> 
> diff --git a/drivers/dma/Kconfig b/drivers/dma/Kconfig
> index fadc4d8..04e381b 100644
> --- a/drivers/dma/Kconfig
> +++ b/drivers/dma/Kconfig
> @@ -483,6 +483,15 @@ config STM32_DMA
>  	  If you have a board based on such a MCU and wish to use DMA say Y
>  	  here.
>  
> +config STM32_DMAMUX
> +	bool "STMicroelectronics STM32 dma multiplexer support"
> +	depends on STM32_DMA || COMPILE_TEST
> +	help
> +	  Enable support for the on-chip DMA multiplexer on STMicroelectronics
> +	  STM32 MCUs.
> +	  If you have a board based on such a MCU and wish to use DMAMUX say Y
> +	  here.
> +
>  config S3C24XX_DMAC
>  	bool "Samsung S3C24XX DMA support"
>  	depends on ARCH_S3C24XX || COMPILE_TEST
> diff --git a/drivers/dma/Makefile b/drivers/dma/Makefile
> index f08f8de..a145ad1 100644
> --- a/drivers/dma/Makefile
> +++ b/drivers/dma/Makefile
> @@ -59,6 +59,7 @@ obj-$(CONFIG_RENESAS_DMA) += sh/
>  obj-$(CONFIG_SIRF_DMA) += sirf-dma.o
>  obj-$(CONFIG_STE_DMA40) += ste_dma40.o ste_dma40_ll.o
>  obj-$(CONFIG_STM32_DMA) += stm32-dma.o
> +obj-$(CONFIG_STM32_DMAMUX) += stm32-dmamux.o
>  obj-$(CONFIG_S3C24XX_DMAC) += s3c24xx-dma.o
>  obj-$(CONFIG_TXX9_DMAC) += txx9dmac.o
>  obj-$(CONFIG_TEGRA20_APB_DMA) += tegra20-apb-dma.o
> diff --git a/drivers/dma/stm32-dmamux.c b/drivers/dma/stm32-dmamux.c
> new file mode 100644
> index 0000000..22812e7
> --- /dev/null
> +++ b/drivers/dma/stm32-dmamux.c
> @@ -0,0 +1,327 @@
> +/*
> + *
> + * Copyright (C) STMicroelectronics SA 2017
> + * Author(s): M'boumba Cedric Madianga <cedric.madianga@gmail.com>
> + *            Pierre-Yves Mordret <pierre-yves.mordret@st.com>
> + *
> + * License terms: GPL V2.0.
> + *
> + * This program is free software; you can redistribute it and/or modify it
> + * under the terms of the GNU General Public License version 2 as published by
> + * the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful, but
> + * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
> + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more
> + * details.
> + *
> + * DMA Router driver for STM32 DMA MUX
> + *
> + * Based on TI DMA Crossbar driver
> + *
> + */
> +
> +#include <linux/clk.h>
> +#include <linux/delay.h>
> +#include <linux/err.h>
> +#include <linux/init.h>
> +#include <linux/module.h>
> +#include <linux/of_device.h>
> +#include <linux/of_dma.h>
> +#include <linux/reset.h>
> +#include <linux/slab.h>
> +#include <linux/spinlock.h>
> +
> +#define STM32_DMAMUX_CCR(x)		(0x4 * (x))
> +#define STM32_DMAMUX_MAX_DMA_REQUESTS	32
> +#define STM32_DMAMUX_MAX_REQUESTS	255
> +
> +struct stm32_dmamux {
> +	u32 master;
> +	u32 request;
> +	u32 chan_id;
> +};
> +
> +struct stm32_dmamux_data {
> +	struct dma_router dmarouter;
> +	struct clk *clk;
> +	struct reset_control *rst;
> +	void __iomem *iomem;
> +	u32 dma_requests; /* Number of DMA requests connected to DMAMUX */
> +	u32 dmamux_requests; /* Number of DMA requests routed toward DMAs */
> +	spinlock_t lock; /* Protects register access */
> +	unsigned long *dma_inuse; /* Used DMA channel */
> +	u32 dma_reqs[]; /* Number of DMA Request per DMA masters.
> +			 *  [0] holds number of DMA Masters.
> +			 *  To be kept at very end end of this structure
> +			 */
> +};
> +
> +static inline u32 stm32_dmamux_read(void __iomem *iomem, u32 reg)
> +{
> +	return readl_relaxed(iomem + reg);
> +}
> +
> +static inline void stm32_dmamux_write(void __iomem *iomem, u32 reg, u32 val)
> +{
> +	writel_relaxed(val, iomem + reg);
> +}
> +
> +static void stm32_dmamux_free(struct device *dev, void *route_data)
> +{
> +	struct stm32_dmamux_data *dmamux = dev_get_drvdata(dev);
> +	struct stm32_dmamux *mux = route_data;
> +	unsigned long flags;
> +
> +	/* Clear dma request */
> +	spin_lock_irqsave(&dmamux->lock, flags);
> +
> +	stm32_dmamux_write(dmamux->iomem, STM32_DMAMUX_CCR(mux->chan_id), 0);
> +	clear_bit(mux->chan_id, dmamux->dma_inuse);
> +
> +	if (!IS_ERR(dmamux->clk))
> +		clk_disable(dmamux->clk);
> +
> +	spin_unlock_irqrestore(&dmamux->lock, flags);
> +
> +	dev_dbg(dev, "Unmapping DMAMUX(%u) to DMA%u(%u)\n",
> +		mux->request, mux->master, mux->chan_id);
> +
> +	kfree(mux);
> +}
> +
> +static void *stm32_dmamux_route_allocate(struct of_phandle_args *dma_spec,
> +					 struct of_dma *ofdma)
> +{
> +	struct platform_device *pdev = of_find_device_by_node(ofdma->of_node);
> +	struct stm32_dmamux_data *dmamux = platform_get_drvdata(pdev);
> +	struct stm32_dmamux *mux;
> +	u32 i, min, max;
> +	int ret;
> +	unsigned long flags;
> +
> +	if (dma_spec->args_count != 3) {
> +		dev_err(&pdev->dev, "invalid number of dma mux args\n");
> +		return ERR_PTR(-EINVAL);
> +	}
> +
> +	if (dma_spec->args[0] > dmamux->dmamux_requests) {
> +		dev_err(&pdev->dev, "invalid mux request number: %d\n",
> +			dma_spec->args[0]);
> +		return ERR_PTR(-EINVAL);
> +	}
> +
> +	mux = kzalloc(sizeof(*mux), GFP_KERNEL);
> +	if (!mux)
> +		return ERR_PTR(-ENOMEM);
> +
> +	spin_lock_irqsave(&dmamux->lock, flags);
> +	mux->chan_id = find_first_zero_bit(dmamux->dma_inuse,
> +					   dmamux->dma_requests);
> +	set_bit(mux->chan_id, dmamux->dma_inuse);
> +	spin_unlock_irqrestore(&dmamux->lock, flags);
> +
> +	if (mux->chan_id == dmamux->dma_requests) {
> +		dev_err(&pdev->dev, "Run out of free DMA requests\n");
> +		ret = -ENOMEM;
> +		goto error;
> +	}
> +
> +	/* Look for DMA Master */
> +	for (i = 1, min = 0, max = dmamux->dma_reqs[i];
> +	     i <= dmamux->dma_reqs[0];
> +	     min += dmamux->dma_reqs[i], max += dmamux->dma_reqs[++i])
> +		if (mux->chan_id < max)
> +			break;
> +	mux->master = i - 1;
> +
> +	/* The of_node_put() will be done in of_dma_router_xlate function */
> +	dma_spec->np = of_parse_phandle(ofdma->of_node, "dma-masters", i - 1);
> +	if (!dma_spec->np) {
> +		dev_err(&pdev->dev, "can't get dma master\n");
> +		ret = -EINVAL;
> +		goto error;
> +	}
> +
> +	/* Set dma request */
> +	spin_lock_irqsave(&dmamux->lock, flags);
> +	if (!IS_ERR(dmamux->clk)) {
> +		ret = clk_enable(dmamux->clk);
> +		if (ret < 0) {
> +			spin_unlock_irqrestore(&dmamux->lock, flags);
> +			dev_err(&pdev->dev, "clk_prep_enable issue: %d\n", ret);
> +			goto error;
> +		}
> +	}
> +	spin_unlock_irqrestore(&dmamux->lock, flags);
> +
> +	mux->request = dma_spec->args[0];
> +
> +	/*  craft DMA spec */
> +	dma_spec->args[3] = dma_spec->args[2];
> +	dma_spec->args[2] = dma_spec->args[1];
> +	dma_spec->args[1] = 0;
> +	dma_spec->args[0] = mux->chan_id - min;
> +	dma_spec->args_count = 4;
> +
> +	stm32_dmamux_write(dmamux->iomem, STM32_DMAMUX_CCR(mux->chan_id),
> +			   mux->request);
> +	dev_dbg(&pdev->dev, "Mapping DMAMUX(%u) to DMA%u(%u)\n",
> +		mux->request, mux->master, mux->chan_id);
> +
> +	return mux;
> +
> +error:
> +	clear_bit(mux->chan_id, dmamux->dma_inuse);
> +	kfree(mux);
> +	return ERR_PTR(ret);
> +}
> +
> +static const struct of_device_id stm32_stm32dma_master_match[] = {
> +	{ .compatible = "st,stm32-dma", },
> +	{},
> +};
> +
> +static int stm32_dmamux_probe(struct platform_device *pdev)
> +{
> +	struct device_node *node = pdev->dev.of_node;
> +	const struct of_device_id *match;
> +	struct device_node *dma_node;
> +	struct stm32_dmamux_data *stm32_dmamux;
> +	struct resource *res;
> +	void __iomem *iomem;
> +	int i, count, ret;
> +	u32 dma_req;
> +
> +	if (!node)
> +		return -ENODEV;
> +
> +	count = device_property_read_u32_array(&pdev->dev, "dma-masters",
> +					       NULL, 0);
> +	if (count < 0) {
> +		dev_err(&pdev->dev, "Can't get DMA master(s) node\n");
> +		return -ENODEV;
> +	}
> +
> +	stm32_dmamux = devm_kzalloc(&pdev->dev, sizeof(*stm32_dmamux) +
> +				    sizeof(u32) * (count + 1), GFP_KERNEL);
> +	if (!stm32_dmamux)
> +		return -ENOMEM;
> +
> +	dma_req = 0;
> +	for (i = 1; i <= count; i++) {
> +		dma_node = of_parse_phandle(node, "dma-masters", i - 1);
> +
> +		match = of_match_node(stm32_stm32dma_master_match, dma_node);
> +		if (!match) {
> +			dev_err(&pdev->dev, "DMA master is not supported\n");
> +			of_node_put(dma_node);
> +			return -EINVAL;
> +		}
> +
> +		if (of_property_read_u32(dma_node, "dma-requests",
> +					 &stm32_dmamux->dma_reqs[i])) {
> +			dev_info(&pdev->dev,
> +				 "Missing MUX output information, using %u.\n",
> +				 STM32_DMAMUX_MAX_DMA_REQUESTS);
> +			stm32_dmamux->dma_reqs[i] =
> +				STM32_DMAMUX_MAX_DMA_REQUESTS;
> +		}
> +		dma_req += stm32_dmamux->dma_reqs[i];
> +		of_node_put(dma_node);
> +	}
> +
> +	if (dma_req > STM32_DMAMUX_MAX_DMA_REQUESTS) {
> +		dev_err(&pdev->dev, "Too many DMA Master Requests to manage\n");
> +		return -ENODEV;
> +	}
> +
> +	stm32_dmamux->dma_requests = dma_req;
> +	stm32_dmamux->dma_reqs[0] = count;
> +	stm32_dmamux->dma_inuse = devm_kcalloc(&pdev->dev,
> +					       BITS_TO_LONGS(dma_req),
> +					       sizeof(unsigned long),
> +					       GFP_KERNEL);
> +	if (!stm32_dmamux->dma_inuse)
> +		return -ENOMEM;
> +
> +	if (device_property_read_u32(&pdev->dev, "dma-requests",
> +				     &stm32_dmamux->dmamux_requests)) {
> +		stm32_dmamux->dmamux_requests = STM32_DMAMUX_MAX_REQUESTS;
> +		dev_warn(&pdev->dev, "DMAMUX defaulting on %u requests\n",
> +			 stm32_dmamux->dmamux_requests);
> +	}
> +
> +	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> +	if (!res)
> +		return -ENODEV;
> +
> +	iomem = devm_ioremap_resource(&pdev->dev, res);
> +	if (!iomem)
> +		return -ENOMEM;
> +
> +	spin_lock_init(&stm32_dmamux->lock);
> +
> +	stm32_dmamux->clk = devm_clk_get(&pdev->dev, NULL);
> +	if (IS_ERR(stm32_dmamux->clk)) {
> +		ret = PTR_ERR(stm32_dmamux->clk);
> +		if (ret == -EPROBE_DEFER)
> +			dev_info(&pdev->dev, "Missing controller clock\n");
> +		return ret;
> +	}
> +
> +	stm32_dmamux->rst = devm_reset_control_get(&pdev->dev, NULL);
> +	if (!IS_ERR(stm32_dmamux->rst)) {
> +		reset_control_assert(stm32_dmamux->rst);
> +		udelay(2);
> +		reset_control_deassert(stm32_dmamux->rst);
> +	}
> +
> +	stm32_dmamux->iomem = iomem;
> +	stm32_dmamux->dmarouter.dev = &pdev->dev;
> +	stm32_dmamux->dmarouter.route_free = stm32_dmamux_free;
> +
> +	platform_set_drvdata(pdev, stm32_dmamux);
> +
> +	if (!IS_ERR(stm32_dmamux->clk)) {
> +		ret = clk_prepare_enable(stm32_dmamux->clk);
> +		if (ret < 0) {
> +			dev_err(&pdev->dev, "clk_prep_enable error: %d\n", ret);
> +			return ret;
> +		}
> +	}
> +
> +	/* Reset the dmamux */
> +	for (i = 0; i < stm32_dmamux->dma_requests; i++)
> +		stm32_dmamux_write(stm32_dmamux->iomem, STM32_DMAMUX_CCR(i), 0);
> +
> +	if (!IS_ERR(stm32_dmamux->clk))
> +		clk_disable(stm32_dmamux->clk);
> +
> +	return of_dma_router_register(node, stm32_dmamux_route_allocate,
> +				     &stm32_dmamux->dmarouter);
> +}
> +
> +static const struct of_device_id stm32_dmamux_match[] = {
> +	{ .compatible = "st,stm32h7-dmamux" },
> +	{},
> +};
> +
> +static struct platform_driver stm32_dmamux_driver = {
> +	.probe	= stm32_dmamux_probe,
> +	.driver = {
> +		.name = "stm32-dmamux",
> +		.of_match_table = stm32_dmamux_match,
> +	},
> +};
> +
> +static int __init stm32_dmamux_init(void)
> +{
> +	return platform_driver_register(&stm32_dmamux_driver);
> +}
> +arch_initcall(stm32_dmamux_init);
> +
> +MODULE_DESCRIPTION("DMA Router driver for STM32 DMA MUX");
> +MODULE_AUTHOR("M'boumba Cedric Madianga <cedric.madianga@gmail.com>");
> +MODULE_AUTHOR("Pierre-Yves Mordret <pierre-yves.mordret@st.com>");
> +MODULE_LICENSE("GPL v2");

[RESEND PATCH v5 2/4] dmaengine: Add STM32 DMAMUX driver

[Peter Ujfalusi]

?


Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki. Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki

On 2017-09-22 10:31, Pierre-Yves MORDRET wrote:
> This patch implements the STM32 DMAMUX driver.
> 
> The DMAMUX request multiplexer allows routing a DMA request line between
> the peripherals and the DMA controllers of the product. The routing
> function is ensured by a programmable multi-channel DMA request line
> multiplexer. Each channel selects a unique DMA request line,
> unconditionally or synchronously with events from its DMAMUX
> synchronization inputs. The DMAMUX may also be used as a DMA request
> generator from programmable events on its input trigger signals
> 
> Signed-off-by: M'boumba Cedric Madianga <cedric.madianga@gmail.com>
> Signed-off-by: Pierre-Yves MORDRET <pierre-yves.mordret@st.com>

Reviewed-by: Peter Ujfalusi <peter.ujfalusi@ti.com>

> ---
>  Version history:
>     v5:
>         * Set selected channel ID within a lock to avoid race condition.
>           Release if any error occurs
>     v4:
>         * Get rid of st,dmamux property and custom API between STM32
>           DMAMUX and DMA.
>           DMAMUX will read DMA masters from Device Tree from now on.
>           Merely one DMAMUX node is needed now.
>         * Only STM32 DMA are allowed to be connected onto DMAMUX
>         * channelID is computed locally within the driver and crafted in
>           dma_psec to be passed toward DMA master.
>           DMAMUX router sorts out which DMA master will serve the
>           request automatically.
>         * This version forbids the use of DMA in standalone and DMAMUX at
>           the same time : all clients need to be connected either on DMA
>           or DMAMUX ; no mix up
>     v3:
>         * change compatible to st,stm32h7-dmamux to be mode SoC specific
>     v2:
>         * Dynamic channelID allocation.
>         * Change of_property_... by device_property.
>         * New clock management.
>         * DMAMUX Configuration API.
> ---
> ---
>  drivers/dma/Kconfig        |   9 ++
>  drivers/dma/Makefile       |   1 +
>  drivers/dma/stm32-dmamux.c | 327 +++++++++++++++++++++++++++++++++++++++++++++
>  3 files changed, 337 insertions(+)
>  create mode 100644 drivers/dma/stm32-dmamux.c
> 
> diff --git a/drivers/dma/Kconfig b/drivers/dma/Kconfig
> index fadc4d8..04e381b 100644
> --- a/drivers/dma/Kconfig
> +++ b/drivers/dma/Kconfig
> @@ -483,6 +483,15 @@ config STM32_DMA
>  	  If you have a board based on such a MCU and wish to use DMA say Y
>  	  here.
>  
> +config STM32_DMAMUX
> +	bool "STMicroelectronics STM32 dma multiplexer support"
> +	depends on STM32_DMA || COMPILE_TEST
> +	help
> +	  Enable support for the on-chip DMA multiplexer on STMicroelectronics
> +	  STM32 MCUs.
> +	  If you have a board based on such a MCU and wish to use DMAMUX say Y
> +	  here.
> +
>  config S3C24XX_DMAC
>  	bool "Samsung S3C24XX DMA support"
>  	depends on ARCH_S3C24XX || COMPILE_TEST
> diff --git a/drivers/dma/Makefile b/drivers/dma/Makefile
> index f08f8de..a145ad1 100644
> --- a/drivers/dma/Makefile
> +++ b/drivers/dma/Makefile
> @@ -59,6 +59,7 @@ obj-$(CONFIG_RENESAS_DMA) += sh/
>  obj-$(CONFIG_SIRF_DMA) += sirf-dma.o
>  obj-$(CONFIG_STE_DMA40) += ste_dma40.o ste_dma40_ll.o
>  obj-$(CONFIG_STM32_DMA) += stm32-dma.o
> +obj-$(CONFIG_STM32_DMAMUX) += stm32-dmamux.o
>  obj-$(CONFIG_S3C24XX_DMAC) += s3c24xx-dma.o
>  obj-$(CONFIG_TXX9_DMAC) += txx9dmac.o
>  obj-$(CONFIG_TEGRA20_APB_DMA) += tegra20-apb-dma.o
> diff --git a/drivers/dma/stm32-dmamux.c b/drivers/dma/stm32-dmamux.c
> new file mode 100644
> index 0000000..22812e7
> --- /dev/null
> +++ b/drivers/dma/stm32-dmamux.c
> @@ -0,0 +1,327 @@
> +/*
> + *
> + * Copyright (C) STMicroelectronics SA 2017
> + * Author(s): M'boumba Cedric Madianga <cedric.madianga@gmail.com>
> + *            Pierre-Yves Mordret <pierre-yves.mordret@st.com>
> + *
> + * License terms: GPL V2.0.
> + *
> + * This program is free software; you can redistribute it and/or modify it
> + * under the terms of the GNU General Public License version 2 as published by
> + * the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful, but
> + * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
> + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more
> + * details.
> + *
> + * DMA Router driver for STM32 DMA MUX
> + *
> + * Based on TI DMA Crossbar driver
> + *
> + */
> +
> +#include <linux/clk.h>
> +#include <linux/delay.h>
> +#include <linux/err.h>
> +#include <linux/init.h>
> +#include <linux/module.h>
> +#include <linux/of_device.h>
> +#include <linux/of_dma.h>
> +#include <linux/reset.h>
> +#include <linux/slab.h>
> +#include <linux/spinlock.h>
> +
> +#define STM32_DMAMUX_CCR(x)		(0x4 * (x))
> +#define STM32_DMAMUX_MAX_DMA_REQUESTS	32
> +#define STM32_DMAMUX_MAX_REQUESTS	255
> +
> +struct stm32_dmamux {
> +	u32 master;
> +	u32 request;
> +	u32 chan_id;
> +};
> +
> +struct stm32_dmamux_data {
> +	struct dma_router dmarouter;
> +	struct clk *clk;
> +	struct reset_control *rst;
> +	void __iomem *iomem;
> +	u32 dma_requests; /* Number of DMA requests connected to DMAMUX */
> +	u32 dmamux_requests; /* Number of DMA requests routed toward DMAs */
> +	spinlock_t lock; /* Protects register access */
> +	unsigned long *dma_inuse; /* Used DMA channel */
> +	u32 dma_reqs[]; /* Number of DMA Request per DMA masters.
> +			 *  [0] holds number of DMA Masters.
> +			 *  To be kept at very end end of this structure
> +			 */
> +};
> +
> +static inline u32 stm32_dmamux_read(void __iomem *iomem, u32 reg)
> +{
> +	return readl_relaxed(iomem + reg);
> +}
> +
> +static inline void stm32_dmamux_write(void __iomem *iomem, u32 reg, u32 val)
> +{
> +	writel_relaxed(val, iomem + reg);
> +}
> +
> +static void stm32_dmamux_free(struct device *dev, void *route_data)
> +{
> +	struct stm32_dmamux_data *dmamux = dev_get_drvdata(dev);
> +	struct stm32_dmamux *mux = route_data;
> +	unsigned long flags;
> +
> +	/* Clear dma request */
> +	spin_lock_irqsave(&dmamux->lock, flags);
> +
> +	stm32_dmamux_write(dmamux->iomem, STM32_DMAMUX_CCR(mux->chan_id), 0);
> +	clear_bit(mux->chan_id, dmamux->dma_inuse);
> +
> +	if (!IS_ERR(dmamux->clk))
> +		clk_disable(dmamux->clk);
> +
> +	spin_unlock_irqrestore(&dmamux->lock, flags);
> +
> +	dev_dbg(dev, "Unmapping DMAMUX(%u) to DMA%u(%u)\n",
> +		mux->request, mux->master, mux->chan_id);
> +
> +	kfree(mux);
> +}
> +
> +static void *stm32_dmamux_route_allocate(struct of_phandle_args *dma_spec,
> +					 struct of_dma *ofdma)
> +{
> +	struct platform_device *pdev = of_find_device_by_node(ofdma->of_node);
> +	struct stm32_dmamux_data *dmamux = platform_get_drvdata(pdev);
> +	struct stm32_dmamux *mux;
> +	u32 i, min, max;
> +	int ret;
> +	unsigned long flags;
> +
> +	if (dma_spec->args_count != 3) {
> +		dev_err(&pdev->dev, "invalid number of dma mux args\n");
> +		return ERR_PTR(-EINVAL);
> +	}
> +
> +	if (dma_spec->args[0] > dmamux->dmamux_requests) {
> +		dev_err(&pdev->dev, "invalid mux request number: %d\n",
> +			dma_spec->args[0]);
> +		return ERR_PTR(-EINVAL);
> +	}
> +
> +	mux = kzalloc(sizeof(*mux), GFP_KERNEL);
> +	if (!mux)
> +		return ERR_PTR(-ENOMEM);
> +
> +	spin_lock_irqsave(&dmamux->lock, flags);
> +	mux->chan_id = find_first_zero_bit(dmamux->dma_inuse,
> +					   dmamux->dma_requests);
> +	set_bit(mux->chan_id, dmamux->dma_inuse);
> +	spin_unlock_irqrestore(&dmamux->lock, flags);
> +
> +	if (mux->chan_id == dmamux->dma_requests) {
> +		dev_err(&pdev->dev, "Run out of free DMA requests\n");
> +		ret = -ENOMEM;
> +		goto error;
> +	}
> +
> +	/* Look for DMA Master */
> +	for (i = 1, min = 0, max = dmamux->dma_reqs[i];
> +	     i <= dmamux->dma_reqs[0];
> +	     min += dmamux->dma_reqs[i], max += dmamux->dma_reqs[++i])
> +		if (mux->chan_id < max)
> +			break;
> +	mux->master = i - 1;
> +
> +	/* The of_node_put() will be done in of_dma_router_xlate function */
> +	dma_spec->np = of_parse_phandle(ofdma->of_node, "dma-masters", i - 1);
> +	if (!dma_spec->np) {
> +		dev_err(&pdev->dev, "can't get dma master\n");
> +		ret = -EINVAL;
> +		goto error;
> +	}
> +
> +	/* Set dma request */
> +	spin_lock_irqsave(&dmamux->lock, flags);
> +	if (!IS_ERR(dmamux->clk)) {
> +		ret = clk_enable(dmamux->clk);
> +		if (ret < 0) {
> +			spin_unlock_irqrestore(&dmamux->lock, flags);
> +			dev_err(&pdev->dev, "clk_prep_enable issue: %d\n", ret);
> +			goto error;
> +		}
> +	}
> +	spin_unlock_irqrestore(&dmamux->lock, flags);
> +
> +	mux->request = dma_spec->args[0];
> +
> +	/*  craft DMA spec */
> +	dma_spec->args[3] = dma_spec->args[2];
> +	dma_spec->args[2] = dma_spec->args[1];
> +	dma_spec->args[1] = 0;
> +	dma_spec->args[0] = mux->chan_id - min;
> +	dma_spec->args_count = 4;
> +
> +	stm32_dmamux_write(dmamux->iomem, STM32_DMAMUX_CCR(mux->chan_id),
> +			   mux->request);
> +	dev_dbg(&pdev->dev, "Mapping DMAMUX(%u) to DMA%u(%u)\n",
> +		mux->request, mux->master, mux->chan_id);
> +
> +	return mux;
> +
> +error:
> +	clear_bit(mux->chan_id, dmamux->dma_inuse);
> +	kfree(mux);
> +	return ERR_PTR(ret);
> +}
> +
> +static const struct of_device_id stm32_stm32dma_master_match[] = {
> +	{ .compatible = "st,stm32-dma", },
> +	{},
> +};
> +
> +static int stm32_dmamux_probe(struct platform_device *pdev)
> +{
> +	struct device_node *node = pdev->dev.of_node;
> +	const struct of_device_id *match;
> +	struct device_node *dma_node;
> +	struct stm32_dmamux_data *stm32_dmamux;
> +	struct resource *res;
> +	void __iomem *iomem;
> +	int i, count, ret;
> +	u32 dma_req;
> +
> +	if (!node)
> +		return -ENODEV;
> +
> +	count = device_property_read_u32_array(&pdev->dev, "dma-masters",
> +					       NULL, 0);
> +	if (count < 0) {
> +		dev_err(&pdev->dev, "Can't get DMA master(s) node\n");
> +		return -ENODEV;
> +	}
> +
> +	stm32_dmamux = devm_kzalloc(&pdev->dev, sizeof(*stm32_dmamux) +
> +				    sizeof(u32) * (count + 1), GFP_KERNEL);
> +	if (!stm32_dmamux)
> +		return -ENOMEM;
> +
> +	dma_req = 0;
> +	for (i = 1; i <= count; i++) {
> +		dma_node = of_parse_phandle(node, "dma-masters", i - 1);
> +
> +		match = of_match_node(stm32_stm32dma_master_match, dma_node);
> +		if (!match) {
> +			dev_err(&pdev->dev, "DMA master is not supported\n");
> +			of_node_put(dma_node);
> +			return -EINVAL;
> +		}
> +
> +		if (of_property_read_u32(dma_node, "dma-requests",
> +					 &stm32_dmamux->dma_reqs[i])) {
> +			dev_info(&pdev->dev,
> +				 "Missing MUX output information, using %u.\n",
> +				 STM32_DMAMUX_MAX_DMA_REQUESTS);
> +			stm32_dmamux->dma_reqs[i] =
> +				STM32_DMAMUX_MAX_DMA_REQUESTS;
> +		}
> +		dma_req += stm32_dmamux->dma_reqs[i];
> +		of_node_put(dma_node);
> +	}
> +
> +	if (dma_req > STM32_DMAMUX_MAX_DMA_REQUESTS) {
> +		dev_err(&pdev->dev, "Too many DMA Master Requests to manage\n");
> +		return -ENODEV;
> +	}
> +
> +	stm32_dmamux->dma_requests = dma_req;
> +	stm32_dmamux->dma_reqs[0] = count;
> +	stm32_dmamux->dma_inuse = devm_kcalloc(&pdev->dev,
> +					       BITS_TO_LONGS(dma_req),
> +					       sizeof(unsigned long),
> +					       GFP_KERNEL);
> +	if (!stm32_dmamux->dma_inuse)
> +		return -ENOMEM;
> +
> +	if (device_property_read_u32(&pdev->dev, "dma-requests",
> +				     &stm32_dmamux->dmamux_requests)) {
> +		stm32_dmamux->dmamux_requests = STM32_DMAMUX_MAX_REQUESTS;
> +		dev_warn(&pdev->dev, "DMAMUX defaulting on %u requests\n",
> +			 stm32_dmamux->dmamux_requests);
> +	}
> +
> +	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> +	if (!res)
> +		return -ENODEV;
> +
> +	iomem = devm_ioremap_resource(&pdev->dev, res);
> +	if (!iomem)
> +		return -ENOMEM;
> +
> +	spin_lock_init(&stm32_dmamux->lock);
> +
> +	stm32_dmamux->clk = devm_clk_get(&pdev->dev, NULL);
> +	if (IS_ERR(stm32_dmamux->clk)) {
> +		ret = PTR_ERR(stm32_dmamux->clk);
> +		if (ret == -EPROBE_DEFER)
> +			dev_info(&pdev->dev, "Missing controller clock\n");
> +		return ret;
> +	}
> +
> +	stm32_dmamux->rst = devm_reset_control_get(&pdev->dev, NULL);
> +	if (!IS_ERR(stm32_dmamux->rst)) {
> +		reset_control_assert(stm32_dmamux->rst);
> +		udelay(2);
> +		reset_control_deassert(stm32_dmamux->rst);
> +	}
> +
> +	stm32_dmamux->iomem = iomem;
> +	stm32_dmamux->dmarouter.dev = &pdev->dev;
> +	stm32_dmamux->dmarouter.route_free = stm32_dmamux_free;
> +
> +	platform_set_drvdata(pdev, stm32_dmamux);
> +
> +	if (!IS_ERR(stm32_dmamux->clk)) {
> +		ret = clk_prepare_enable(stm32_dmamux->clk);
> +		if (ret < 0) {
> +			dev_err(&pdev->dev, "clk_prep_enable error: %d\n", ret);
> +			return ret;
> +		}
> +	}
> +
> +	/* Reset the dmamux */
> +	for (i = 0; i < stm32_dmamux->dma_requests; i++)
> +		stm32_dmamux_write(stm32_dmamux->iomem, STM32_DMAMUX_CCR(i), 0);
> +
> +	if (!IS_ERR(stm32_dmamux->clk))
> +		clk_disable(stm32_dmamux->clk);
> +
> +	return of_dma_router_register(node, stm32_dmamux_route_allocate,
> +				     &stm32_dmamux->dmarouter);
> +}
> +
> +static const struct of_device_id stm32_dmamux_match[] = {
> +	{ .compatible = "st,stm32h7-dmamux" },
> +	{},
> +};
> +
> +static struct platform_driver stm32_dmamux_driver = {
> +	.probe	= stm32_dmamux_probe,
> +	.driver = {
> +		.name = "stm32-dmamux",
> +		.of_match_table = stm32_dmamux_match,
> +	},
> +};
> +
> +static int __init stm32_dmamux_init(void)
> +{
> +	return platform_driver_register(&stm32_dmamux_driver);
> +}
> +arch_initcall(stm32_dmamux_init);
> +
> +MODULE_DESCRIPTION("DMA Router driver for STM32 DMA MUX");
> +MODULE_AUTHOR("M'boumba Cedric Madianga <cedric.madianga@gmail.com>");
> +MODULE_AUTHOR("Pierre-Yves Mordret <pierre-yves.mordret@st.com>");
> +MODULE_LICENSE("GPL v2");

Re: [RESEND PATCH v5 2/4] dmaengine: Add STM32 DMAMUX driver

[Peter Ujfalusi]




Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki. Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki

On 2017-09-22 10:31, Pierre-Yves MORDRET wrote:
> This patch implements the STM32 DMAMUX driver.
> 
> The DMAMUX request multiplexer allows routing a DMA request line between
> the peripherals and the DMA controllers of the product. The routing
> function is ensured by a programmable multi-channel DMA request line
> multiplexer. Each channel selects a unique DMA request line,
> unconditionally or synchronously with events from its DMAMUX
> synchronization inputs. The DMAMUX may also be used as a DMA request
> generator from programmable events on its input trigger signals
> 
> Signed-off-by: M'boumba Cedric Madianga <cedric.madianga@gmail.com>
> Signed-off-by: Pierre-Yves MORDRET <pierre-yves.mordret@st.com>

Reviewed-by: Peter Ujfalusi <peter.ujfalusi@ti.com>

> ---
>  Version history:
>     v5:
>         * Set selected channel ID within a lock to avoid race condition.
>           Release if any error occurs
>     v4:
>         * Get rid of st,dmamux property and custom API between STM32
>           DMAMUX and DMA.
>           DMAMUX will read DMA masters from Device Tree from now on.
>           Merely one DMAMUX node is needed now.
>         * Only STM32 DMA are allowed to be connected onto DMAMUX
>         * channelID is computed locally within the driver and crafted in
>           dma_psec to be passed toward DMA master.
>           DMAMUX router sorts out which DMA master will serve the
>           request automatically.
>         * This version forbids the use of DMA in standalone and DMAMUX at
>           the same time : all clients need to be connected either on DMA
>           or DMAMUX ; no mix up
>     v3:
>         * change compatible to st,stm32h7-dmamux to be mode SoC specific
>     v2:
>         * Dynamic channelID allocation.
>         * Change of_property_... by device_property.
>         * New clock management.
>         * DMAMUX Configuration API.
> ---
> ---
>  drivers/dma/Kconfig        |   9 ++
>  drivers/dma/Makefile       |   1 +
>  drivers/dma/stm32-dmamux.c | 327 +++++++++++++++++++++++++++++++++++++++++++++
>  3 files changed, 337 insertions(+)
>  create mode 100644 drivers/dma/stm32-dmamux.c
> 
> diff --git a/drivers/dma/Kconfig b/drivers/dma/Kconfig
> index fadc4d8..04e381b 100644
> --- a/drivers/dma/Kconfig
> +++ b/drivers/dma/Kconfig
> @@ -483,6 +483,15 @@ config STM32_DMA
>  	  If you have a board based on such a MCU and wish to use DMA say Y
>  	  here.
>  
> +config STM32_DMAMUX
> +	bool "STMicroelectronics STM32 dma multiplexer support"
> +	depends on STM32_DMA || COMPILE_TEST
> +	help
> +	  Enable support for the on-chip DMA multiplexer on STMicroelectronics
> +	  STM32 MCUs.
> +	  If you have a board based on such a MCU and wish to use DMAMUX say Y
> +	  here.
> +
>  config S3C24XX_DMAC
>  	bool "Samsung S3C24XX DMA support"
>  	depends on ARCH_S3C24XX || COMPILE_TEST
> diff --git a/drivers/dma/Makefile b/drivers/dma/Makefile
> index f08f8de..a145ad1 100644
> --- a/drivers/dma/Makefile
> +++ b/drivers/dma/Makefile
> @@ -59,6 +59,7 @@ obj-$(CONFIG_RENESAS_DMA) += sh/
>  obj-$(CONFIG_SIRF_DMA) += sirf-dma.o
>  obj-$(CONFIG_STE_DMA40) += ste_dma40.o ste_dma40_ll.o
>  obj-$(CONFIG_STM32_DMA) += stm32-dma.o
> +obj-$(CONFIG_STM32_DMAMUX) += stm32-dmamux.o
>  obj-$(CONFIG_S3C24XX_DMAC) += s3c24xx-dma.o
>  obj-$(CONFIG_TXX9_DMAC) += txx9dmac.o
>  obj-$(CONFIG_TEGRA20_APB_DMA) += tegra20-apb-dma.o
> diff --git a/drivers/dma/stm32-dmamux.c b/drivers/dma/stm32-dmamux.c
> new file mode 100644
> index 0000000..22812e7
> --- /dev/null
> +++ b/drivers/dma/stm32-dmamux.c
> @@ -0,0 +1,327 @@
> +/*
> + *
> + * Copyright (C) STMicroelectronics SA 2017
> + * Author(s): M'boumba Cedric Madianga <cedric.madianga@gmail.com>
> + *            Pierre-Yves Mordret <pierre-yves.mordret@st.com>
> + *
> + * License terms: GPL V2.0.
> + *
> + * This program is free software; you can redistribute it and/or modify it
> + * under the terms of the GNU General Public License version 2 as published by
> + * the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful, but
> + * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
> + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more
> + * details.
> + *
> + * DMA Router driver for STM32 DMA MUX
> + *
> + * Based on TI DMA Crossbar driver
> + *
> + */
> +
> +#include <linux/clk.h>
> +#include <linux/delay.h>
> +#include <linux/err.h>
> +#include <linux/init.h>
> +#include <linux/module.h>
> +#include <linux/of_device.h>
> +#include <linux/of_dma.h>
> +#include <linux/reset.h>
> +#include <linux/slab.h>
> +#include <linux/spinlock.h>
> +
> +#define STM32_DMAMUX_CCR(x)		(0x4 * (x))
> +#define STM32_DMAMUX_MAX_DMA_REQUESTS	32
> +#define STM32_DMAMUX_MAX_REQUESTS	255
> +
> +struct stm32_dmamux {
> +	u32 master;
> +	u32 request;
> +	u32 chan_id;
> +};
> +
> +struct stm32_dmamux_data {
> +	struct dma_router dmarouter;
> +	struct clk *clk;
> +	struct reset_control *rst;
> +	void __iomem *iomem;
> +	u32 dma_requests; /* Number of DMA requests connected to DMAMUX */
> +	u32 dmamux_requests; /* Number of DMA requests routed toward DMAs */
> +	spinlock_t lock; /* Protects register access */
> +	unsigned long *dma_inuse; /* Used DMA channel */
> +	u32 dma_reqs[]; /* Number of DMA Request per DMA masters.
> +			 *  [0] holds number of DMA Masters.
> +			 *  To be kept at very end end of this structure
> +			 */
> +};
> +
> +static inline u32 stm32_dmamux_read(void __iomem *iomem, u32 reg)
> +{
> +	return readl_relaxed(iomem + reg);
> +}
> +
> +static inline void stm32_dmamux_write(void __iomem *iomem, u32 reg, u32 val)
> +{
> +	writel_relaxed(val, iomem + reg);
> +}
> +
> +static void stm32_dmamux_free(struct device *dev, void *route_data)
> +{
> +	struct stm32_dmamux_data *dmamux = dev_get_drvdata(dev);
> +	struct stm32_dmamux *mux = route_data;
> +	unsigned long flags;
> +
> +	/* Clear dma request */
> +	spin_lock_irqsave(&dmamux->lock, flags);
> +
> +	stm32_dmamux_write(dmamux->iomem, STM32_DMAMUX_CCR(mux->chan_id), 0);
> +	clear_bit(mux->chan_id, dmamux->dma_inuse);
> +
> +	if (!IS_ERR(dmamux->clk))
> +		clk_disable(dmamux->clk);
> +
> +	spin_unlock_irqrestore(&dmamux->lock, flags);
> +
> +	dev_dbg(dev, "Unmapping DMAMUX(%u) to DMA%u(%u)\n",
> +		mux->request, mux->master, mux->chan_id);
> +
> +	kfree(mux);
> +}
> +
> +static void *stm32_dmamux_route_allocate(struct of_phandle_args *dma_spec,
> +					 struct of_dma *ofdma)
> +{
> +	struct platform_device *pdev = of_find_device_by_node(ofdma->of_node);
> +	struct stm32_dmamux_data *dmamux = platform_get_drvdata(pdev);
> +	struct stm32_dmamux *mux;
> +	u32 i, min, max;
> +	int ret;
> +	unsigned long flags;
> +
> +	if (dma_spec->args_count != 3) {
> +		dev_err(&pdev->dev, "invalid number of dma mux args\n");
> +		return ERR_PTR(-EINVAL);
> +	}
> +
> +	if (dma_spec->args[0] > dmamux->dmamux_requests) {
> +		dev_err(&pdev->dev, "invalid mux request number: %d\n",
> +			dma_spec->args[0]);
> +		return ERR_PTR(-EINVAL);
> +	}
> +
> +	mux = kzalloc(sizeof(*mux), GFP_KERNEL);
> +	if (!mux)
> +		return ERR_PTR(-ENOMEM);
> +
> +	spin_lock_irqsave(&dmamux->lock, flags);
> +	mux->chan_id = find_first_zero_bit(dmamux->dma_inuse,
> +					   dmamux->dma_requests);
> +	set_bit(mux->chan_id, dmamux->dma_inuse);
> +	spin_unlock_irqrestore(&dmamux->lock, flags);
> +
> +	if (mux->chan_id == dmamux->dma_requests) {
> +		dev_err(&pdev->dev, "Run out of free DMA requests\n");
> +		ret = -ENOMEM;
> +		goto error;
> +	}
> +
> +	/* Look for DMA Master */
> +	for (i = 1, min = 0, max = dmamux->dma_reqs[i];
> +	     i <= dmamux->dma_reqs[0];
> +	     min += dmamux->dma_reqs[i], max += dmamux->dma_reqs[++i])
> +		if (mux->chan_id < max)
> +			break;
> +	mux->master = i - 1;
> +
> +	/* The of_node_put() will be done in of_dma_router_xlate function */
> +	dma_spec->np = of_parse_phandle(ofdma->of_node, "dma-masters", i - 1);
> +	if (!dma_spec->np) {
> +		dev_err(&pdev->dev, "can't get dma master\n");
> +		ret = -EINVAL;
> +		goto error;
> +	}
> +
> +	/* Set dma request */
> +	spin_lock_irqsave(&dmamux->lock, flags);
> +	if (!IS_ERR(dmamux->clk)) {
> +		ret = clk_enable(dmamux->clk);
> +		if (ret < 0) {
> +			spin_unlock_irqrestore(&dmamux->lock, flags);
> +			dev_err(&pdev->dev, "clk_prep_enable issue: %d\n", ret);
> +			goto error;
> +		}
> +	}
> +	spin_unlock_irqrestore(&dmamux->lock, flags);
> +
> +	mux->request = dma_spec->args[0];
> +
> +	/*  craft DMA spec */
> +	dma_spec->args[3] = dma_spec->args[2];
> +	dma_spec->args[2] = dma_spec->args[1];
> +	dma_spec->args[1] = 0;
> +	dma_spec->args[0] = mux->chan_id - min;
> +	dma_spec->args_count = 4;
> +
> +	stm32_dmamux_write(dmamux->iomem, STM32_DMAMUX_CCR(mux->chan_id),
> +			   mux->request);
> +	dev_dbg(&pdev->dev, "Mapping DMAMUX(%u) to DMA%u(%u)\n",
> +		mux->request, mux->master, mux->chan_id);
> +
> +	return mux;
> +
> +error:
> +	clear_bit(mux->chan_id, dmamux->dma_inuse);
> +	kfree(mux);
> +	return ERR_PTR(ret);
> +}
> +
> +static const struct of_device_id stm32_stm32dma_master_match[] = {
> +	{ .compatible = "st,stm32-dma", },
> +	{},
> +};
> +
> +static int stm32_dmamux_probe(struct platform_device *pdev)
> +{
> +	struct device_node *node = pdev->dev.of_node;
> +	const struct of_device_id *match;
> +	struct device_node *dma_node;
> +	struct stm32_dmamux_data *stm32_dmamux;
> +	struct resource *res;
> +	void __iomem *iomem;
> +	int i, count, ret;
> +	u32 dma_req;
> +
> +	if (!node)
> +		return -ENODEV;
> +
> +	count = device_property_read_u32_array(&pdev->dev, "dma-masters",
> +					       NULL, 0);
> +	if (count < 0) {
> +		dev_err(&pdev->dev, "Can't get DMA master(s) node\n");
> +		return -ENODEV;
> +	}
> +
> +	stm32_dmamux = devm_kzalloc(&pdev->dev, sizeof(*stm32_dmamux) +
> +				    sizeof(u32) * (count + 1), GFP_KERNEL);
> +	if (!stm32_dmamux)
> +		return -ENOMEM;
> +
> +	dma_req = 0;
> +	for (i = 1; i <= count; i++) {
> +		dma_node = of_parse_phandle(node, "dma-masters", i - 1);
> +
> +		match = of_match_node(stm32_stm32dma_master_match, dma_node);
> +		if (!match) {
> +			dev_err(&pdev->dev, "DMA master is not supported\n");
> +			of_node_put(dma_node);
> +			return -EINVAL;
> +		}
> +
> +		if (of_property_read_u32(dma_node, "dma-requests",
> +					 &stm32_dmamux->dma_reqs[i])) {
> +			dev_info(&pdev->dev,
> +				 "Missing MUX output information, using %u.\n",
> +				 STM32_DMAMUX_MAX_DMA_REQUESTS);
> +			stm32_dmamux->dma_reqs[i] =
> +				STM32_DMAMUX_MAX_DMA_REQUESTS;
> +		}
> +		dma_req += stm32_dmamux->dma_reqs[i];
> +		of_node_put(dma_node);
> +	}
> +
> +	if (dma_req > STM32_DMAMUX_MAX_DMA_REQUESTS) {
> +		dev_err(&pdev->dev, "Too many DMA Master Requests to manage\n");
> +		return -ENODEV;
> +	}
> +
> +	stm32_dmamux->dma_requests = dma_req;
> +	stm32_dmamux->dma_reqs[0] = count;
> +	stm32_dmamux->dma_inuse = devm_kcalloc(&pdev->dev,
> +					       BITS_TO_LONGS(dma_req),
> +					       sizeof(unsigned long),
> +					       GFP_KERNEL);
> +	if (!stm32_dmamux->dma_inuse)
> +		return -ENOMEM;
> +
> +	if (device_property_read_u32(&pdev->dev, "dma-requests",
> +				     &stm32_dmamux->dmamux_requests)) {
> +		stm32_dmamux->dmamux_requests = STM32_DMAMUX_MAX_REQUESTS;
> +		dev_warn(&pdev->dev, "DMAMUX defaulting on %u requests\n",
> +			 stm32_dmamux->dmamux_requests);
> +	}
> +
> +	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> +	if (!res)
> +		return -ENODEV;
> +
> +	iomem = devm_ioremap_resource(&pdev->dev, res);
> +	if (!iomem)
> +		return -ENOMEM;
> +
> +	spin_lock_init(&stm32_dmamux->lock);
> +
> +	stm32_dmamux->clk = devm_clk_get(&pdev->dev, NULL);
> +	if (IS_ERR(stm32_dmamux->clk)) {
> +		ret = PTR_ERR(stm32_dmamux->clk);
> +		if (ret == -EPROBE_DEFER)
> +			dev_info(&pdev->dev, "Missing controller clock\n");
> +		return ret;
> +	}
> +
> +	stm32_dmamux->rst = devm_reset_control_get(&pdev->dev, NULL);
> +	if (!IS_ERR(stm32_dmamux->rst)) {
> +		reset_control_assert(stm32_dmamux->rst);
> +		udelay(2);
> +		reset_control_deassert(stm32_dmamux->rst);
> +	}
> +
> +	stm32_dmamux->iomem = iomem;
> +	stm32_dmamux->dmarouter.dev = &pdev->dev;
> +	stm32_dmamux->dmarouter.route_free = stm32_dmamux_free;
> +
> +	platform_set_drvdata(pdev, stm32_dmamux);
> +
> +	if (!IS_ERR(stm32_dmamux->clk)) {
> +		ret = clk_prepare_enable(stm32_dmamux->clk);
> +		if (ret < 0) {
> +			dev_err(&pdev->dev, "clk_prep_enable error: %d\n", ret);
> +			return ret;
> +		}
> +	}
> +
> +	/* Reset the dmamux */
> +	for (i = 0; i < stm32_dmamux->dma_requests; i++)
> +		stm32_dmamux_write(stm32_dmamux->iomem, STM32_DMAMUX_CCR(i), 0);
> +
> +	if (!IS_ERR(stm32_dmamux->clk))
> +		clk_disable(stm32_dmamux->clk);
> +
> +	return of_dma_router_register(node, stm32_dmamux_route_allocate,
> +				     &stm32_dmamux->dmarouter);
> +}
> +
> +static const struct of_device_id stm32_dmamux_match[] = {
> +	{ .compatible = "st,stm32h7-dmamux" },
> +	{},
> +};
> +
> +static struct platform_driver stm32_dmamux_driver = {
> +	.probe	= stm32_dmamux_probe,
> +	.driver = {
> +		.name = "stm32-dmamux",
> +		.of_match_table = stm32_dmamux_match,
> +	},
> +};
> +
> +static int __init stm32_dmamux_init(void)
> +{
> +	return platform_driver_register(&stm32_dmamux_driver);
> +}
> +arch_initcall(stm32_dmamux_init);
> +
> +MODULE_DESCRIPTION("DMA Router driver for STM32 DMA MUX");
> +MODULE_AUTHOR("M'boumba Cedric Madianga <cedric.madianga@gmail.com>");
> +MODULE_AUTHOR("Pierre-Yves Mordret <pierre-yves.mordret@st.com>");
> +MODULE_LICENSE("GPL v2");


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[RESEND PATCH v5 3/4] dt-bindings: stm32-dma: add a property to handle STM32 DMAMUX

[Pierre-Yves MORDRET]

STM32 DMA controller has to exposed its number of request line to be
addressed via STM32 DMAMUX.

Signed-off-by: M'boumba Cedric Madianga <cedric.madianga@gmail.com>
Signed-off-by: Pierre-Yves MORDRET <pierre-yves.mordret@st.com>
Acked-by: Rob Herring <robh@kernel.org>
---
 Version history:
    v5:
    v4:
        * get rid of st,dmamux property
        * number of DMA requests is exposed for DMAMUX
    v3:
        * None
    v2:
        * Typo fix
---
---
 Documentation/devicetree/bindings/dma/stm32-dma.txt | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/dma/stm32-dma.txt b/Documentation/devicetree/bindings/dma/stm32-dma.txt
index 4408af6..77542e1 100644
--- a/Documentation/devicetree/bindings/dma/stm32-dma.txt
+++ b/Documentation/devicetree/bindings/dma/stm32-dma.txt
@@ -13,6 +13,7 @@ Required properties:
 - #dma-cells : Must be <4>. See DMA client paragraph for more details.
 
 Optional properties:
+- dma-requests : Number of DMA requests supported.
 - resets: Reference to a reset controller asserting the DMA controller
 - st,mem2mem: boolean; if defined, it indicates that the controller supports
   memory-to-memory transfer
@@ -34,12 +35,13 @@ Example:
 		#dma-cells = <4>;
 		st,mem2mem;
 		resets = <&rcc 150>;
+		dma-requests = <8>;
 	};
 
 * DMA client
 
 DMA clients connected to the STM32 DMA controller must use the format
-described in the dma.txt file, using a five-cell specifier for each
+described in the dma.txt file, using a four-cell specifier for each
 channel: a phandle to the DMA controller plus the following four integer cells:
 
 1. The channel id
-- 
2.7.4

[RESEND PATCH v5 3/4] dt-bindings: stm32-dma: add a property to handle STM32 DMAMUX

[Pierre-Yves MORDRET]

STM32 DMA controller has to exposed its number of request line to be
addressed via STM32 DMAMUX.

Signed-off-by: M'boumba Cedric Madianga <cedric.madianga@gmail.com>
Signed-off-by: Pierre-Yves MORDRET <pierre-yves.mordret@st.com>
Acked-by: Rob Herring <robh@kernel.org>
---
 Version history:
    v5:
    v4:
        * get rid of st,dmamux property
        * number of DMA requests is exposed for DMAMUX
    v3:
        * None
    v2:
        * Typo fix
---
---
 Documentation/devicetree/bindings/dma/stm32-dma.txt | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/dma/stm32-dma.txt b/Documentation/devicetree/bindings/dma/stm32-dma.txt
index 4408af6..77542e1 100644
--- a/Documentation/devicetree/bindings/dma/stm32-dma.txt
+++ b/Documentation/devicetree/bindings/dma/stm32-dma.txt
@@ -13,6 +13,7 @@ Required properties:
 - #dma-cells : Must be <4>. See DMA client paragraph for more details.
 
 Optional properties:
+- dma-requests : Number of DMA requests supported.
 - resets: Reference to a reset controller asserting the DMA controller
 - st,mem2mem: boolean; if defined, it indicates that the controller supports
   memory-to-memory transfer
@@ -34,12 +35,13 @@ Example:
 		#dma-cells = <4>;
 		st,mem2mem;
 		resets = <&rcc 150>;
+		dma-requests = <8>;
 	};
 
 * DMA client
 
 DMA clients connected to the STM32 DMA controller must use the format
-described in the dma.txt file, using a five-cell specifier for each
+described in the dma.txt file, using a four-cell specifier for each
 channel: a phandle to the DMA controller plus the following four integer cells:
 
 1. The channel id
-- 
2.7.4

[RESEND PATCH v5 3/4] dt-bindings: stm32-dma: add a property to handle STM32 DMAMUX

[Pierre-Yves MORDRET]

STM32 DMA controller has to exposed its number of request line to be
addressed via STM32 DMAMUX.

Signed-off-by: M'boumba Cedric Madianga <cedric.madianga-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
Signed-off-by: Pierre-Yves MORDRET <pierre-yves.mordret-qxv4g6HH51o@public.gmane.org>
Acked-by: Rob Herring <robh-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
---
 Version history:
    v5:
    v4:
        * get rid of st,dmamux property
        * number of DMA requests is exposed for DMAMUX
    v3:
        * None
    v2:
        * Typo fix
---
---
 Documentation/devicetree/bindings/dma/stm32-dma.txt | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/dma/stm32-dma.txt b/Documentation/devicetree/bindings/dma/stm32-dma.txt
index 4408af6..77542e1 100644
--- a/Documentation/devicetree/bindings/dma/stm32-dma.txt
+++ b/Documentation/devicetree/bindings/dma/stm32-dma.txt
@@ -13,6 +13,7 @@ Required properties:
 - #dma-cells : Must be <4>. See DMA client paragraph for more details.
 
 Optional properties:
+- dma-requests : Number of DMA requests supported.
 - resets: Reference to a reset controller asserting the DMA controller
 - st,mem2mem: boolean; if defined, it indicates that the controller supports
   memory-to-memory transfer
@@ -34,12 +35,13 @@ Example:
 		#dma-cells = <4>;
 		st,mem2mem;
 		resets = <&rcc 150>;
+		dma-requests = <8>;
 	};
 
 * DMA client
 
 DMA clients connected to the STM32 DMA controller must use the format
-described in the dma.txt file, using a five-cell specifier for each
+described in the dma.txt file, using a four-cell specifier for each
 channel: a phandle to the DMA controller plus the following four integer cells:
 
 1. The channel id
-- 
2.7.4

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[RESEND PATCH v5 4/4] ARM: configs: stm32: Add DMAMUX support in STM32 defconfig

[Pierre-Yves MORDRET]

This patch adds DMAMUX support in STM32 defconfig file

Signed-off-by: M'boumba Cedric Madianga <cedric.madianga@gmail.com>
Signed-off-by: Pierre-Yves MORDRET <pierre-yves.mordret@st.com>
---
 Version history:
    v5:
    v4:
    v3:
    v2:
        * None
---
---
 arch/arm/configs/stm32_defconfig | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm/configs/stm32_defconfig b/arch/arm/configs/stm32_defconfig
index 90e5c46..988f395 100644
--- a/arch/arm/configs/stm32_defconfig
+++ b/arch/arm/configs/stm32_defconfig
@@ -67,6 +67,7 @@ CONFIG_RTC_CLASS=y
 CONFIG_RTC_DRV_STM32=y
 CONFIG_DMADEVICES=y
 CONFIG_STM32_DMA=y
+CONFIG_STM32_DMAMUX=y
 CONFIG_IIO=y
 CONFIG_STM32_ADC_CORE=y
 CONFIG_STM32_ADC=y
-- 
2.7.4

[RESEND PATCH v5 4/4] ARM: configs: stm32: Add DMAMUX support in STM32 defconfig

[Pierre-Yves MORDRET]

This patch adds DMAMUX support in STM32 defconfig file

Signed-off-by: M'boumba Cedric Madianga <cedric.madianga@gmail.com>
Signed-off-by: Pierre-Yves MORDRET <pierre-yves.mordret@st.com>
---
 Version history:
    v5:
    v4:
    v3:
    v2:
        * None
---
---
 arch/arm/configs/stm32_defconfig | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm/configs/stm32_defconfig b/arch/arm/configs/stm32_defconfig
index 90e5c46..988f395 100644
--- a/arch/arm/configs/stm32_defconfig
+++ b/arch/arm/configs/stm32_defconfig
@@ -67,6 +67,7 @@ CONFIG_RTC_CLASS=y
 CONFIG_RTC_DRV_STM32=y
 CONFIG_DMADEVICES=y
 CONFIG_STM32_DMA=y
+CONFIG_STM32_DMAMUX=y
 CONFIG_IIO=y
 CONFIG_STM32_ADC_CORE=y
 CONFIG_STM32_ADC=y
-- 
2.7.4

[RESEND PATCH v5 4/4] ARM: configs: stm32: Add DMAMUX support in STM32 defconfig

[Pierre-Yves MORDRET]

This patch adds DMAMUX support in STM32 defconfig file

Signed-off-by: M'boumba Cedric Madianga <cedric.madianga@gmail.com>
Signed-off-by: Pierre-Yves MORDRET <pierre-yves.mordret@st.com>
---
 Version history:
    v5:
    v4:
    v3:
    v2:
        * None
---
---
 arch/arm/configs/stm32_defconfig | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm/configs/stm32_defconfig b/arch/arm/configs/stm32_defconfig
index 90e5c46..988f395 100644
--- a/arch/arm/configs/stm32_defconfig
+++ b/arch/arm/configs/stm32_defconfig
@@ -67,6 +67,7 @@ CONFIG_RTC_CLASS=y
 CONFIG_RTC_DRV_STM32=y
 CONFIG_DMADEVICES=y
 CONFIG_STM32_DMA=y
+CONFIG_STM32_DMAMUX=y
 CONFIG_IIO=y
 CONFIG_STM32_ADC_CORE=y
 CONFIG_STM32_ADC=y
-- 
2.7.4

Re: [RESEND PATCH v5 4/4] ARM: configs: stm32: Add DMAMUX support in STM32 defconfig

[Vinod Koul]

On Fri, Sep 22, 2017 at 09:31:32AM +0200, Pierre-Yves MORDRET wrote:
> This patch adds DMAMUX support in STM32 defconfig file

Need ACK from ARM folks on this.

> 
> Signed-off-by: M'boumba Cedric Madianga <cedric.madianga@gmail.com>
> Signed-off-by: Pierre-Yves MORDRET <pierre-yves.mordret@st.com>
> ---
>  Version history:
>     v5:
>     v4:
>     v3:
>     v2:
>         * None
> ---
> ---
>  arch/arm/configs/stm32_defconfig | 1 +
>  1 file changed, 1 insertion(+)
> 
> diff --git a/arch/arm/configs/stm32_defconfig b/arch/arm/configs/stm32_defconfig
> index 90e5c46..988f395 100644
> --- a/arch/arm/configs/stm32_defconfig
> +++ b/arch/arm/configs/stm32_defconfig
> @@ -67,6 +67,7 @@ CONFIG_RTC_CLASS=y
>  CONFIG_RTC_DRV_STM32=y
>  CONFIG_DMADEVICES=y
>  CONFIG_STM32_DMA=y
> +CONFIG_STM32_DMAMUX=y
>  CONFIG_IIO=y
>  CONFIG_STM32_ADC_CORE=y
>  CONFIG_STM32_ADC=y
> -- 
> 2.7.4
> 

-- 
~Vinod

[RESEND PATCH v5 4/4] ARM: configs: stm32: Add DMAMUX support in STM32 defconfig

[Vinod Koul]

On Fri, Sep 22, 2017 at 09:31:32AM +0200, Pierre-Yves MORDRET wrote:
> This patch adds DMAMUX support in STM32 defconfig file

Need ACK from ARM folks on this.

> 
> Signed-off-by: M'boumba Cedric Madianga <cedric.madianga@gmail.com>
> Signed-off-by: Pierre-Yves MORDRET <pierre-yves.mordret@st.com>
> ---
>  Version history:
>     v5:
>     v4:
>     v3:
>     v2:
>         * None
> ---
> ---
>  arch/arm/configs/stm32_defconfig | 1 +
>  1 file changed, 1 insertion(+)
> 
> diff --git a/arch/arm/configs/stm32_defconfig b/arch/arm/configs/stm32_defconfig
> index 90e5c46..988f395 100644
> --- a/arch/arm/configs/stm32_defconfig
> +++ b/arch/arm/configs/stm32_defconfig
> @@ -67,6 +67,7 @@ CONFIG_RTC_CLASS=y
>  CONFIG_RTC_DRV_STM32=y
>  CONFIG_DMADEVICES=y
>  CONFIG_STM32_DMA=y
> +CONFIG_STM32_DMAMUX=y
>  CONFIG_IIO=y
>  CONFIG_STM32_ADC_CORE=y
>  CONFIG_STM32_ADC=y
> -- 
> 2.7.4
> 

-- 
~Vinod

Re: [RESEND PATCH v5 4/4] ARM: configs: stm32: Add DMAMUX support in STM32 defconfig

[Vinod Koul]

On Fri, Sep 22, 2017 at 09:31:32AM +0200, Pierre-Yves MORDRET wrote:
> This patch adds DMAMUX support in STM32 defconfig file

Need ACK from ARM folks on this.

> 
> Signed-off-by: M'boumba Cedric Madianga <cedric.madianga-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
> Signed-off-by: Pierre-Yves MORDRET <pierre-yves.mordret-qxv4g6HH51o@public.gmane.org>
> ---
>  Version history:
>     v5:
>     v4:
>     v3:
>     v2:
>         * None
> ---
> ---
>  arch/arm/configs/stm32_defconfig | 1 +
>  1 file changed, 1 insertion(+)
> 
> diff --git a/arch/arm/configs/stm32_defconfig b/arch/arm/configs/stm32_defconfig
> index 90e5c46..988f395 100644
> --- a/arch/arm/configs/stm32_defconfig
> +++ b/arch/arm/configs/stm32_defconfig
> @@ -67,6 +67,7 @@ CONFIG_RTC_CLASS=y
>  CONFIG_RTC_DRV_STM32=y
>  CONFIG_DMADEVICES=y
>  CONFIG_STM32_DMA=y
> +CONFIG_STM32_DMAMUX=y
>  CONFIG_IIO=y
>  CONFIG_STM32_ADC_CORE=y
>  CONFIG_STM32_ADC=y
> -- 
> 2.7.4
> 

-- 
~Vinod
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [RESEND PATCH v5 4/4] ARM: configs: stm32: Add DMAMUX support in STM32 defconfig

[Alexandre Torgue]

Hi Vinod

On 09/26/2017 06:46 PM, Vinod Koul wrote:
> On Fri, Sep 22, 2017 at 09:31:32AM +0200, Pierre-Yves MORDRET wrote:
>> This patch adds DMAMUX support in STM32 defconfig file
> 
> Need ACK from ARM folks on this.

I will take it in my pull request.

Regards
Alex
> 
>>
>> Signed-off-by: M'boumba Cedric Madianga <cedric.madianga@gmail.com>
>> Signed-off-by: Pierre-Yves MORDRET <pierre-yves.mordret@st.com>
>> ---
>>   Version history:
>>      v5:
>>      v4:
>>      v3:
>>      v2:
>>          * None
>> ---
>> ---
>>   arch/arm/configs/stm32_defconfig | 1 +
>>   1 file changed, 1 insertion(+)
>>
>> diff --git a/arch/arm/configs/stm32_defconfig b/arch/arm/configs/stm32_defconfig
>> index 90e5c46..988f395 100644
>> --- a/arch/arm/configs/stm32_defconfig
>> +++ b/arch/arm/configs/stm32_defconfig
>> @@ -67,6 +67,7 @@ CONFIG_RTC_CLASS=y
>>   CONFIG_RTC_DRV_STM32=y
>>   CONFIG_DMADEVICES=y
>>   CONFIG_STM32_DMA=y
>> +CONFIG_STM32_DMAMUX=y
>>   CONFIG_IIO=y
>>   CONFIG_STM32_ADC_CORE=y
>>   CONFIG_STM32_ADC=y
>> -- 
>> 2.7.4
>>
> 

[RESEND PATCH v5 4/4] ARM: configs: stm32: Add DMAMUX support in STM32 defconfig

[Alexandre Torgue]

Hi Vinod

On 09/26/2017 06:46 PM, Vinod Koul wrote:
> On Fri, Sep 22, 2017 at 09:31:32AM +0200, Pierre-Yves MORDRET wrote:
>> This patch adds DMAMUX support in STM32 defconfig file
> 
> Need ACK from ARM folks on this.

I will take it in my pull request.

Regards
Alex
> 
>>
>> Signed-off-by: M'boumba Cedric Madianga <cedric.madianga@gmail.com>
>> Signed-off-by: Pierre-Yves MORDRET <pierre-yves.mordret@st.com>
>> ---
>>   Version history:
>>      v5:
>>      v4:
>>      v3:
>>      v2:
>>          * None
>> ---
>> ---
>>   arch/arm/configs/stm32_defconfig | 1 +
>>   1 file changed, 1 insertion(+)
>>
>> diff --git a/arch/arm/configs/stm32_defconfig b/arch/arm/configs/stm32_defconfig
>> index 90e5c46..988f395 100644
>> --- a/arch/arm/configs/stm32_defconfig
>> +++ b/arch/arm/configs/stm32_defconfig
>> @@ -67,6 +67,7 @@ CONFIG_RTC_CLASS=y
>>   CONFIG_RTC_DRV_STM32=y
>>   CONFIG_DMADEVICES=y
>>   CONFIG_STM32_DMA=y
>> +CONFIG_STM32_DMAMUX=y
>>   CONFIG_IIO=y
>>   CONFIG_STM32_ADC_CORE=y
>>   CONFIG_STM32_ADC=y
>> -- 
>> 2.7.4
>>
> 

Re: [RESEND PATCH v5 4/4] ARM: configs: stm32: Add DMAMUX support in STM32 defconfig

[Alexandre Torgue]

Hi Vinod

On 09/26/2017 06:46 PM, Vinod Koul wrote:
> On Fri, Sep 22, 2017 at 09:31:32AM +0200, Pierre-Yves MORDRET wrote:
>> This patch adds DMAMUX support in STM32 defconfig file
> 
> Need ACK from ARM folks on this.

I will take it in my pull request.

Regards
Alex
> 
>>
>> Signed-off-by: M'boumba Cedric Madianga <cedric.madianga-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
>> Signed-off-by: Pierre-Yves MORDRET <pierre-yves.mordret-qxv4g6HH51o@public.gmane.org>
>> ---
>>   Version history:
>>      v5:
>>      v4:
>>      v3:
>>      v2:
>>          * None
>> ---
>> ---
>>   arch/arm/configs/stm32_defconfig | 1 +
>>   1 file changed, 1 insertion(+)
>>
>> diff --git a/arch/arm/configs/stm32_defconfig b/arch/arm/configs/stm32_defconfig
>> index 90e5c46..988f395 100644
>> --- a/arch/arm/configs/stm32_defconfig
>> +++ b/arch/arm/configs/stm32_defconfig
>> @@ -67,6 +67,7 @@ CONFIG_RTC_CLASS=y
>>   CONFIG_RTC_DRV_STM32=y
>>   CONFIG_DMADEVICES=y
>>   CONFIG_STM32_DMA=y
>> +CONFIG_STM32_DMAMUX=y
>>   CONFIG_IIO=y
>>   CONFIG_STM32_ADC_CORE=y
>>   CONFIG_STM32_ADC=y
>> -- 
>> 2.7.4
>>
> 
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [RESEND PATCH v5 4/4] ARM: configs: stm32: Add DMAMUX support in STM32 defconfig

[Vinod Koul]

On Wed, Sep 27, 2017 at 08:59:55AM +0200, Alexandre Torgue wrote:
> Hi Vinod
> 
> On 09/26/2017 06:46 PM, Vinod Koul wrote:
> >On Fri, Sep 22, 2017 at 09:31:32AM +0200, Pierre-Yves MORDRET wrote:
> >>This patch adds DMAMUX support in STM32 defconfig file
> >
> >Need ACK from ARM folks on this.
> 
> I will take it in my pull request.

sure, other are applied now

-- 
~Vinod

[RESEND PATCH v5 4/4] ARM: configs: stm32: Add DMAMUX support in STM32 defconfig

[Vinod Koul]

On Wed, Sep 27, 2017 at 08:59:55AM +0200, Alexandre Torgue wrote:
> Hi Vinod
> 
> On 09/26/2017 06:46 PM, Vinod Koul wrote:
> >On Fri, Sep 22, 2017 at 09:31:32AM +0200, Pierre-Yves MORDRET wrote:
> >>This patch adds DMAMUX support in STM32 defconfig file
> >
> >Need ACK from ARM folks on this.
> 
> I will take it in my pull request.

sure, other are applied now

-- 
~Vinod

Re: [RESEND PATCH v5 4/4] ARM: configs: stm32: Add DMAMUX support in STM32 defconfig

[Vinod Koul]

On Wed, Sep 27, 2017 at 08:59:55AM +0200, Alexandre Torgue wrote:
> Hi Vinod
> 
> On 09/26/2017 06:46 PM, Vinod Koul wrote:
> >On Fri, Sep 22, 2017 at 09:31:32AM +0200, Pierre-Yves MORDRET wrote:
> >>This patch adds DMAMUX support in STM32 defconfig file
> >
> >Need ACK from ARM folks on this.
> 
> I will take it in my pull request.

sure, other are applied now

-- 
~Vinod
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [RESEND PATCH v5 4/4] ARM: configs: stm32: Add DMAMUX support in STM32 defconfig

[Alexandre Torgue]

Hi,

On 09/22/2017 09:31 AM, Pierre-Yves MORDRET wrote:
> This patch adds DMAMUX support in STM32 defconfig file
> 
> Signed-off-by: M'boumba Cedric Madianga <cedric.madianga@gmail.com>
> Signed-off-by: Pierre-Yves MORDRET <pierre-yves.mordret@st.com>
> ---
>   Version history:
>      v5:
>      v4:
>      v3:
>      v2:
>          * None
> ---
> ---
>   arch/arm/configs/stm32_defconfig | 1 +
>   1 file changed, 1 insertion(+)
> 
> diff --git a/arch/arm/configs/stm32_defconfig b/arch/arm/configs/stm32_defconfig
> index 90e5c46..988f395 100644
> --- a/arch/arm/configs/stm32_defconfig
> +++ b/arch/arm/configs/stm32_defconfig
> @@ -67,6 +67,7 @@ CONFIG_RTC_CLASS=y
>   CONFIG_RTC_DRV_STM32=y
>   CONFIG_DMADEVICES=y
>   CONFIG_STM32_DMA=y
> +CONFIG_STM32_DMAMUX=y
>   CONFIG_IIO=y
>   CONFIG_STM32_ADC_CORE=y
>   CONFIG_STM32_ADC=y
> 

Applied on stm32-defconfig-for-v4.15 branch.

Thanks
Alex

[RESEND PATCH v5 4/4] ARM: configs: stm32: Add DMAMUX support in STM32 defconfig

[Alexandre Torgue]

Hi,

On 09/22/2017 09:31 AM, Pierre-Yves MORDRET wrote:
> This patch adds DMAMUX support in STM32 defconfig file
> 
> Signed-off-by: M'boumba Cedric Madianga <cedric.madianga@gmail.com>
> Signed-off-by: Pierre-Yves MORDRET <pierre-yves.mordret@st.com>
> ---
>   Version history:
>      v5:
>      v4:
>      v3:
>      v2:
>          * None
> ---
> ---
>   arch/arm/configs/stm32_defconfig | 1 +
>   1 file changed, 1 insertion(+)
> 
> diff --git a/arch/arm/configs/stm32_defconfig b/arch/arm/configs/stm32_defconfig
> index 90e5c46..988f395 100644
> --- a/arch/arm/configs/stm32_defconfig
> +++ b/arch/arm/configs/stm32_defconfig
> @@ -67,6 +67,7 @@ CONFIG_RTC_CLASS=y
>   CONFIG_RTC_DRV_STM32=y
>   CONFIG_DMADEVICES=y
>   CONFIG_STM32_DMA=y
> +CONFIG_STM32_DMAMUX=y
>   CONFIG_IIO=y
>   CONFIG_STM32_ADC_CORE=y
>   CONFIG_STM32_ADC=y
> 

Applied on stm32-defconfig-for-v4.15 branch.

Thanks
Alex

Re: [RESEND PATCH v5 4/4] ARM: configs: stm32: Add DMAMUX support in STM32 defconfig

[Alexandre Torgue]

Hi,

On 09/22/2017 09:31 AM, Pierre-Yves MORDRET wrote:
> This patch adds DMAMUX support in STM32 defconfig file
> 
> Signed-off-by: M'boumba Cedric Madianga <cedric.madianga@gmail.com>
> Signed-off-by: Pierre-Yves MORDRET <pierre-yves.mordret@st.com>
> ---
>   Version history:
>      v5:
>      v4:
>      v3:
>      v2:
>          * None
> ---
> ---
>   arch/arm/configs/stm32_defconfig | 1 +
>   1 file changed, 1 insertion(+)
> 
> diff --git a/arch/arm/configs/stm32_defconfig b/arch/arm/configs/stm32_defconfig
> index 90e5c46..988f395 100644
> --- a/arch/arm/configs/stm32_defconfig
> +++ b/arch/arm/configs/stm32_defconfig
> @@ -67,6 +67,7 @@ CONFIG_RTC_CLASS=y
>   CONFIG_RTC_DRV_STM32=y
>   CONFIG_DMADEVICES=y
>   CONFIG_STM32_DMA=y
> +CONFIG_STM32_DMAMUX=y
>   CONFIG_IIO=y
>   CONFIG_STM32_ADC_CORE=y
>   CONFIG_STM32_ADC=y
> 

Applied on stm32-defconfig-for-v4.15 branch.

Thanks
Alex

Re: [RESEND PATCH v5 0/4] Add STM32 DMAMUX support

[Vinod Koul]

On Fri, Sep 22, 2017 at 09:31:28AM +0200, Pierre-Yves MORDRET wrote:
> This patchset adds support for the STM32 DMA multiplexer.
> It allows to map any peripheral DMA request to any channel of the product
> DMAs.
> This IP has been introduced with STM32H7 SoC.

Applied first three patches, thanks

> ---
>  Version history:
>     v5:
>         * Set selected channel ID within a lock to avoid race condition.
>           Release if any error occurs
>     v4:
>         * Add multi-master ability for STM32 DMAMUX
>         * Get rid of st,dmamux property and custom API between STM32
>           DMAMUX and DMA. Bindings has changed.
>           DMAMUX will read DMA masters from Device Tree from now on.
>           Merely one DMAMUX node is needed now.
>         * Only STM32 DMA are allowed to be connected onto DMAMUX
>         * channelID is computed locally within the driver and crafted in
>           dma_psec to be passed toward DMA master.
>           DMAMUX router sorts out which DMA master will serve the
>           request automatically.
>         * This version forbids the use of DMA in standalone and DMAMUX at
>           the same time : all clients need to be connected either on DMA
>           or DMAMUX ; no mix up
>     v3:
>         * change compatible to st,stm32h7-dmamux to be mode Soc specific
>         * add verbosity in dma-cells
> ---
> 
> Pierre-Yves MORDRET (4):
>   dt-bindings: Document the STM32 DMAMUX bindings
>   dmaengine: Add STM32 DMAMUX driver
>   dt-bindings: stm32-dma: add a property to handle STM32 DMAMUX
>   ARM: configs: stm32: Add DMAMUX support in STM32 defconfig
> 
>  .../devicetree/bindings/dma/stm32-dma.txt          |   4 +-
>  .../devicetree/bindings/dma/stm32-dmamux.txt       |  84 ++++++
>  arch/arm/configs/stm32_defconfig                   |   1 +
>  drivers/dma/Kconfig                                |   9 +
>  drivers/dma/Makefile                               |   1 +
>  drivers/dma/stm32-dmamux.c                         | 327 +++++++++++++++++++++
>  6 files changed, 425 insertions(+), 1 deletion(-)
>  create mode 100644 Documentation/devicetree/bindings/dma/stm32-dmamux.txt
>  create mode 100644 drivers/dma/stm32-dmamux.c
> 
> -- 
> 2.7.4
> 

-- 
~Vinod

[RESEND PATCH v5 0/4] Add STM32 DMAMUX support

[Vinod Koul]

On Fri, Sep 22, 2017 at 09:31:28AM +0200, Pierre-Yves MORDRET wrote:
> This patchset adds support for the STM32 DMA multiplexer.
> It allows to map any peripheral DMA request to any channel of the product
> DMAs.
> This IP has been introduced with STM32H7 SoC.

Applied first three patches, thanks

> ---
>  Version history:
>     v5:
>         * Set selected channel ID within a lock to avoid race condition.
>           Release if any error occurs
>     v4:
>         * Add multi-master ability for STM32 DMAMUX
>         * Get rid of st,dmamux property and custom API between STM32
>           DMAMUX and DMA. Bindings has changed.
>           DMAMUX will read DMA masters from Device Tree from now on.
>           Merely one DMAMUX node is needed now.
>         * Only STM32 DMA are allowed to be connected onto DMAMUX
>         * channelID is computed locally within the driver and crafted in
>           dma_psec to be passed toward DMA master.
>           DMAMUX router sorts out which DMA master will serve the
>           request automatically.
>         * This version forbids the use of DMA in standalone and DMAMUX at
>           the same time : all clients need to be connected either on DMA
>           or DMAMUX ; no mix up
>     v3:
>         * change compatible to st,stm32h7-dmamux to be mode Soc specific
>         * add verbosity in dma-cells
> ---
> 
> Pierre-Yves MORDRET (4):
>   dt-bindings: Document the STM32 DMAMUX bindings
>   dmaengine: Add STM32 DMAMUX driver
>   dt-bindings: stm32-dma: add a property to handle STM32 DMAMUX
>   ARM: configs: stm32: Add DMAMUX support in STM32 defconfig
> 
>  .../devicetree/bindings/dma/stm32-dma.txt          |   4 +-
>  .../devicetree/bindings/dma/stm32-dmamux.txt       |  84 ++++++
>  arch/arm/configs/stm32_defconfig                   |   1 +
>  drivers/dma/Kconfig                                |   9 +
>  drivers/dma/Makefile                               |   1 +
>  drivers/dma/stm32-dmamux.c                         | 327 +++++++++++++++++++++
>  6 files changed, 425 insertions(+), 1 deletion(-)
>  create mode 100644 Documentation/devicetree/bindings/dma/stm32-dmamux.txt
>  create mode 100644 drivers/dma/stm32-dmamux.c
> 
> -- 
> 2.7.4
> 

-- 
~Vinod

Re: [RESEND PATCH v5 0/4] Add STM32 DMAMUX support

[Vinod Koul]

On Fri, Sep 22, 2017 at 09:31:28AM +0200, Pierre-Yves MORDRET wrote:
> This patchset adds support for the STM32 DMA multiplexer.
> It allows to map any peripheral DMA request to any channel of the product
> DMAs.
> This IP has been introduced with STM32H7 SoC.

Applied first three patches, thanks

> ---
>  Version history:
>     v5:
>         * Set selected channel ID within a lock to avoid race condition.
>           Release if any error occurs
>     v4:
>         * Add multi-master ability for STM32 DMAMUX
>         * Get rid of st,dmamux property and custom API between STM32
>           DMAMUX and DMA. Bindings has changed.
>           DMAMUX will read DMA masters from Device Tree from now on.
>           Merely one DMAMUX node is needed now.
>         * Only STM32 DMA are allowed to be connected onto DMAMUX
>         * channelID is computed locally within the driver and crafted in
>           dma_psec to be passed toward DMA master.
>           DMAMUX router sorts out which DMA master will serve the
>           request automatically.
>         * This version forbids the use of DMA in standalone and DMAMUX at
>           the same time : all clients need to be connected either on DMA
>           or DMAMUX ; no mix up
>     v3:
>         * change compatible to st,stm32h7-dmamux to be mode Soc specific
>         * add verbosity in dma-cells
> ---
> 
> Pierre-Yves MORDRET (4):
>   dt-bindings: Document the STM32 DMAMUX bindings
>   dmaengine: Add STM32 DMAMUX driver
>   dt-bindings: stm32-dma: add a property to handle STM32 DMAMUX
>   ARM: configs: stm32: Add DMAMUX support in STM32 defconfig
> 
>  .../devicetree/bindings/dma/stm32-dma.txt          |   4 +-
>  .../devicetree/bindings/dma/stm32-dmamux.txt       |  84 ++++++
>  arch/arm/configs/stm32_defconfig                   |   1 +
>  drivers/dma/Kconfig                                |   9 +
>  drivers/dma/Makefile                               |   1 +
>  drivers/dma/stm32-dmamux.c                         | 327 +++++++++++++++++++++
>  6 files changed, 425 insertions(+), 1 deletion(-)
>  create mode 100644 Documentation/devicetree/bindings/dma/stm32-dmamux.txt
>  create mode 100644 drivers/dma/stm32-dmamux.c
> 
> -- 
> 2.7.4
> 

-- 
~Vinod
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [RESEND PATCH v5 0/4] Add STM32 DMAMUX support

[Pierre Yves MORDRET]

Thanks Vinod.
The fourth is going to be managed by ARM team.

Regards

On 09/27/2017 12:36 PM, Vinod Koul wrote:
> On Fri, Sep 22, 2017 at 09:31:28AM +0200, Pierre-Yves MORDRET wrote:
>> This patchset adds support for the STM32 DMA multiplexer.
>> It allows to map any peripheral DMA request to any channel of the product
>> DMAs.
>> This IP has been introduced with STM32H7 SoC.
> 
> Applied first three patches, thanks
> 
>> ---
>>  Version history:
>>     v5:
>>         * Set selected channel ID within a lock to avoid race condition.
>>           Release if any error occurs
>>     v4:
>>         * Add multi-master ability for STM32 DMAMUX
>>         * Get rid of st,dmamux property and custom API between STM32
>>           DMAMUX and DMA. Bindings has changed.
>>           DMAMUX will read DMA masters from Device Tree from now on.
>>           Merely one DMAMUX node is needed now.
>>         * Only STM32 DMA are allowed to be connected onto DMAMUX
>>         * channelID is computed locally within the driver and crafted in
>>           dma_psec to be passed toward DMA master.
>>           DMAMUX router sorts out which DMA master will serve the
>>           request automatically.
>>         * This version forbids the use of DMA in standalone and DMAMUX at
>>           the same time : all clients need to be connected either on DMA
>>           or DMAMUX ; no mix up
>>     v3:
>>         * change compatible to st,stm32h7-dmamux to be mode Soc specific
>>         * add verbosity in dma-cells
>> ---
>>
>> Pierre-Yves MORDRET (4):
>>   dt-bindings: Document the STM32 DMAMUX bindings
>>   dmaengine: Add STM32 DMAMUX driver
>>   dt-bindings: stm32-dma: add a property to handle STM32 DMAMUX
>>   ARM: configs: stm32: Add DMAMUX support in STM32 defconfig
>>
>>  .../devicetree/bindings/dma/stm32-dma.txt          |   4 +-
>>  .../devicetree/bindings/dma/stm32-dmamux.txt       |  84 ++++++
>>  arch/arm/configs/stm32_defconfig                   |   1 +
>>  drivers/dma/Kconfig                                |   9 +
>>  drivers/dma/Makefile                               |   1 +
>>  drivers/dma/stm32-dmamux.c                         | 327 +++++++++++++++++++++
>>  6 files changed, 425 insertions(+), 1 deletion(-)
>>  create mode 100644 Documentation/devicetree/bindings/dma/stm32-dmamux.txt
>>  create mode 100644 drivers/dma/stm32-dmamux.c
>>
>> -- 
>> 2.7.4
>>
> 

[RESEND PATCH v5 0/4] Add STM32 DMAMUX support

[Pierre Yves MORDRET]

Thanks Vinod.
The fourth is going to be managed by ARM team.

Regards

On 09/27/2017 12:36 PM, Vinod Koul wrote:
> On Fri, Sep 22, 2017 at 09:31:28AM +0200, Pierre-Yves MORDRET wrote:
>> This patchset adds support for the STM32 DMA multiplexer.
>> It allows to map any peripheral DMA request to any channel of the product
>> DMAs.
>> This IP has been introduced with STM32H7 SoC.
> 
> Applied first three patches, thanks
> 
>> ---
>>  Version history:
>>     v5:
>>         * Set selected channel ID within a lock to avoid race condition.
>>           Release if any error occurs
>>     v4:
>>         * Add multi-master ability for STM32 DMAMUX
>>         * Get rid of st,dmamux property and custom API between STM32
>>           DMAMUX and DMA. Bindings has changed.
>>           DMAMUX will read DMA masters from Device Tree from now on.
>>           Merely one DMAMUX node is needed now.
>>         * Only STM32 DMA are allowed to be connected onto DMAMUX
>>         * channelID is computed locally within the driver and crafted in
>>           dma_psec to be passed toward DMA master.
>>           DMAMUX router sorts out which DMA master will serve the
>>           request automatically.
>>         * This version forbids the use of DMA in standalone and DMAMUX at
>>           the same time : all clients need to be connected either on DMA
>>           or DMAMUX ; no mix up
>>     v3:
>>         * change compatible to st,stm32h7-dmamux to be mode Soc specific
>>         * add verbosity in dma-cells
>> ---
>>
>> Pierre-Yves MORDRET (4):
>>   dt-bindings: Document the STM32 DMAMUX bindings
>>   dmaengine: Add STM32 DMAMUX driver
>>   dt-bindings: stm32-dma: add a property to handle STM32 DMAMUX
>>   ARM: configs: stm32: Add DMAMUX support in STM32 defconfig
>>
>>  .../devicetree/bindings/dma/stm32-dma.txt          |   4 +-
>>  .../devicetree/bindings/dma/stm32-dmamux.txt       |  84 ++++++
>>  arch/arm/configs/stm32_defconfig                   |   1 +
>>  drivers/dma/Kconfig                                |   9 +
>>  drivers/dma/Makefile                               |   1 +
>>  drivers/dma/stm32-dmamux.c                         | 327 +++++++++++++++++++++
>>  6 files changed, 425 insertions(+), 1 deletion(-)
>>  create mode 100644 Documentation/devicetree/bindings/dma/stm32-dmamux.txt
>>  create mode 100644 drivers/dma/stm32-dmamux.c
>>
>> -- 
>> 2.7.4
>>
> 

Re: [RESEND PATCH v5 0/4] Add STM32 DMAMUX support

[Pierre Yves MORDRET]

Thanks Vinod.
The fourth is going to be managed by ARM team.

Regards

On 09/27/2017 12:36 PM, Vinod Koul wrote:
> On Fri, Sep 22, 2017 at 09:31:28AM +0200, Pierre-Yves MORDRET wrote:
>> This patchset adds support for the STM32 DMA multiplexer.
>> It allows to map any peripheral DMA request to any channel of the product
>> DMAs.
>> This IP has been introduced with STM32H7 SoC.
> 
> Applied first three patches, thanks
> 
>> ---
>>  Version history:
>>     v5:
>>         * Set selected channel ID within a lock to avoid race condition.
>>           Release if any error occurs
>>     v4:
>>         * Add multi-master ability for STM32 DMAMUX
>>         * Get rid of st,dmamux property and custom API between STM32
>>           DMAMUX and DMA. Bindings has changed.
>>           DMAMUX will read DMA masters from Device Tree from now on.
>>           Merely one DMAMUX node is needed now.
>>         * Only STM32 DMA are allowed to be connected onto DMAMUX
>>         * channelID is computed locally within the driver and crafted in
>>           dma_psec to be passed toward DMA master.
>>           DMAMUX router sorts out which DMA master will serve the
>>           request automatically.
>>         * This version forbids the use of DMA in standalone and DMAMUX at
>>           the same time : all clients need to be connected either on DMA
>>           or DMAMUX ; no mix up
>>     v3:
>>         * change compatible to st,stm32h7-dmamux to be mode Soc specific
>>         * add verbosity in dma-cells
>> ---
>>
>> Pierre-Yves MORDRET (4):
>>   dt-bindings: Document the STM32 DMAMUX bindings
>>   dmaengine: Add STM32 DMAMUX driver
>>   dt-bindings: stm32-dma: add a property to handle STM32 DMAMUX
>>   ARM: configs: stm32: Add DMAMUX support in STM32 defconfig
>>
>>  .../devicetree/bindings/dma/stm32-dma.txt          |   4 +-
>>  .../devicetree/bindings/dma/stm32-dmamux.txt       |  84 ++++++
>>  arch/arm/configs/stm32_defconfig                   |   1 +
>>  drivers/dma/Kconfig                                |   9 +
>>  drivers/dma/Makefile                               |   1 +
>>  drivers/dma/stm32-dmamux.c                         | 327 +++++++++++++++++++++
>>  6 files changed, 425 insertions(+), 1 deletion(-)
>>  create mode 100644 Documentation/devicetree/bindings/dma/stm32-dmamux.txt
>>  create mode 100644 drivers/dma/stm32-dmamux.c
>>
>> -- 
>> 2.7.4
>>
>