All of lore.kernel.org
 help / color / mirror / Atom feed
From: Madalin Bucur <madalin.bucur@nxp.com>
To: <netdev@vger.kernel.org>, <davem@davemloft.net>
Cc: <f.fainelli@gmail.com>, <andrew@lunn.ch>,
	<vivien.didelot@savoirfairelinux.com>, <junote@outlook.com>,
	<linux-kernel@vger.kernel.org>
Subject: [PATCH 2/4] dpaa_eth: move of_phy_connect() to the eth driver
Date: Tue, 10 Oct 2017 17:10:16 +0300	[thread overview]
Message-ID: <1507644618-32006-3-git-send-email-madalin.bucur@nxp.com> (raw)
In-Reply-To: <1507644618-32006-1-git-send-email-madalin.bucur@nxp.com>

Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com>
---
 drivers/net/ethernet/freescale/dpaa/dpaa_eth.c | 48 +++++++++++--
 drivers/net/ethernet/freescale/fman/mac.c      | 97 ++++++--------------------
 drivers/net/ethernet/freescale/fman/mac.h      |  5 +-
 3 files changed, 66 insertions(+), 84 deletions(-)

diff --git a/drivers/net/ethernet/freescale/dpaa/dpaa_eth.c b/drivers/net/ethernet/freescale/dpaa/dpaa_eth.c
index 4225806..7cf61d6 100644
--- a/drivers/net/ethernet/freescale/dpaa/dpaa_eth.c
+++ b/drivers/net/ethernet/freescale/dpaa/dpaa_eth.c
@@ -2435,6 +2435,48 @@ static void dpaa_eth_napi_disable(struct dpaa_priv *priv)
 	}
 }
 
+static void dpaa_adjust_link(struct net_device *net_dev)
+{
+	struct mac_device *mac_dev;
+	struct dpaa_priv *priv;
+
+	priv = netdev_priv(net_dev);
+	mac_dev = priv->mac_dev;
+	mac_dev->adjust_link(mac_dev);
+}
+
+static int dpaa_phy_init(struct net_device *net_dev)
+{
+	struct mac_device *mac_dev;
+	struct phy_device *phy_dev;
+	struct dpaa_priv *priv;
+
+	priv = netdev_priv(net_dev);
+	mac_dev = priv->mac_dev;
+
+	phy_dev = of_phy_connect(net_dev, mac_dev->phy_node,
+				 &dpaa_adjust_link, 0,
+				 mac_dev->phy_if);
+	if (!phy_dev) {
+		netif_err(priv, ifup, net_dev, "init_phy() failed\n");
+		return -ENODEV;
+	}
+
+	/* Remove any features not supported by the controller */
+	phy_dev->supported &= mac_dev->if_support;
+
+	/* Enable the symmetric and asymmetric PAUSE frame advertisements,
+	 * as most of the PHY drivers do not enable them by default.
+	 */
+	phy_dev->supported |= (SUPPORTED_Pause | SUPPORTED_Asym_Pause);
+	phy_dev->advertising = phy_dev->supported;
+
+	mac_dev->phy_dev = phy_dev;
+	net_dev->phydev = phy_dev;
+
+	return 0;
+}
+
 static int dpaa_open(struct net_device *net_dev)
 {
 	struct mac_device *mac_dev;
@@ -2445,12 +2487,8 @@ static int dpaa_open(struct net_device *net_dev)
 	mac_dev = priv->mac_dev;
 	dpaa_eth_napi_enable(priv);
 
-	net_dev->phydev = mac_dev->init_phy(net_dev, priv->mac_dev);
-	if (!net_dev->phydev) {
-		netif_err(priv, ifup, net_dev, "init_phy() failed\n");
-		err = -ENODEV;
+	if (dpaa_phy_init(net_dev))
 		goto phy_init_failed;
-	}
 
 	for (i = 0; i < ARRAY_SIZE(mac_dev->port); i++) {
 		err = fman_port_enable(mac_dev->port[i]);
diff --git a/drivers/net/ethernet/freescale/fman/mac.c b/drivers/net/ethernet/freescale/fman/mac.c
index 9a265f8..a0a3107 100644
--- a/drivers/net/ethernet/freescale/fman/mac.c
+++ b/drivers/net/ethernet/freescale/fman/mac.c
@@ -57,9 +57,7 @@ struct mac_priv_s {
 	struct device			*dev;
 	void __iomem			*vaddr;
 	u8				cell_index;
-	phy_interface_t			phy_if;
 	struct fman			*fman;
-	struct device_node		*phy_node;
 	struct device_node		*internal_phy_node;
 	/* List of multicast addresses */
 	struct list_head		mc_addr_list;
@@ -106,7 +104,7 @@ static void set_fman_mac_params(struct mac_device *mac_dev,
 			     resource_size(mac_dev->res));
 	memcpy(&params->addr, mac_dev->addr, sizeof(mac_dev->addr));
 	params->max_speed	= priv->max_speed;
-	params->phy_if		= priv->phy_if;
+	params->phy_if		= mac_dev->phy_if;
 	params->basex_if	= false;
 	params->mac_id		= priv->cell_index;
 	params->fm		= (void *)priv->fman;
@@ -419,15 +417,12 @@ void fman_get_pause_cfg(struct mac_device *mac_dev, bool *rx_pause,
 }
 EXPORT_SYMBOL(fman_get_pause_cfg);
 
-static void adjust_link_void(struct net_device *net_dev)
+static void adjust_link_void(struct mac_device *mac_dev)
 {
 }
 
-static void adjust_link_dtsec(struct net_device *net_dev)
+static void adjust_link_dtsec(struct mac_device *mac_dev)
 {
-	struct device *dev = net_dev->dev.parent;
-	struct dpaa_eth_data *eth_data = dev->platform_data;
-	struct mac_device *mac_dev = eth_data->mac_dev;
 	struct phy_device *phy_dev = mac_dev->phy_dev;
 	struct fman_mac *fman_mac;
 	bool rx_pause, tx_pause;
@@ -444,14 +439,12 @@ static void adjust_link_dtsec(struct net_device *net_dev)
 	fman_get_pause_cfg(mac_dev, &rx_pause, &tx_pause);
 	err = fman_set_mac_active_pause(mac_dev, rx_pause, tx_pause);
 	if (err < 0)
-		netdev_err(net_dev, "fman_set_mac_active_pause() = %d\n", err);
+		dev_err(mac_dev->priv->dev, "fman_set_mac_active_pause() = %d\n",
+			err);
 }
 
-static void adjust_link_memac(struct net_device *net_dev)
+static void adjust_link_memac(struct mac_device *mac_dev)
 {
-	struct device *dev = net_dev->dev.parent;
-	struct dpaa_eth_data *eth_data = dev->platform_data;
-	struct mac_device *mac_dev = eth_data->mac_dev;
 	struct phy_device *phy_dev = mac_dev->phy_dev;
 	struct fman_mac *fman_mac;
 	bool rx_pause, tx_pause;
@@ -463,60 +456,12 @@ static void adjust_link_memac(struct net_device *net_dev)
 	fman_get_pause_cfg(mac_dev, &rx_pause, &tx_pause);
 	err = fman_set_mac_active_pause(mac_dev, rx_pause, tx_pause);
 	if (err < 0)
-		netdev_err(net_dev, "fman_set_mac_active_pause() = %d\n", err);
-}
-
-/* Initializes driver's PHY state, and attaches to the PHY.
- * Returns 0 on success.
- */
-static struct phy_device *init_phy(struct net_device *net_dev,
-				   struct mac_device *mac_dev,
-				   void (*adj_lnk)(struct net_device *))
-{
-	struct phy_device	*phy_dev;
-	struct mac_priv_s	*priv = mac_dev->priv;
-
-	phy_dev = of_phy_connect(net_dev, priv->phy_node, adj_lnk, 0,
-				 priv->phy_if);
-	if (!phy_dev) {
-		netdev_err(net_dev, "Could not connect to PHY\n");
-		return NULL;
-	}
-
-	/* Remove any features not supported by the controller */
-	phy_dev->supported &= mac_dev->if_support;
-	/* Enable the symmetric and asymmetric PAUSE frame advertisements,
-	 * as most of the PHY drivers do not enable them by default.
-	 */
-	phy_dev->supported |= (SUPPORTED_Pause | SUPPORTED_Asym_Pause);
-	phy_dev->advertising = phy_dev->supported;
-
-	mac_dev->phy_dev = phy_dev;
-
-	return phy_dev;
-}
-
-static struct phy_device *dtsec_init_phy(struct net_device *net_dev,
-					 struct mac_device *mac_dev)
-{
-	return init_phy(net_dev, mac_dev, &adjust_link_dtsec);
-}
-
-static struct phy_device *tgec_init_phy(struct net_device *net_dev,
-					struct mac_device *mac_dev)
-{
-	return init_phy(net_dev, mac_dev, adjust_link_void);
-}
-
-static struct phy_device *memac_init_phy(struct net_device *net_dev,
-					 struct mac_device *mac_dev)
-{
-	return init_phy(net_dev, mac_dev, &adjust_link_memac);
+		dev_err(mac_dev->priv->dev, "fman_set_mac_active_pause() = %d\n",
+			err);
 }
 
 static void setup_dtsec(struct mac_device *mac_dev)
 {
-	mac_dev->init_phy		= dtsec_init_phy;
 	mac_dev->init			= dtsec_initialization;
 	mac_dev->set_promisc		= dtsec_set_promiscuous;
 	mac_dev->change_addr		= dtsec_modify_mac_address;
@@ -528,14 +473,13 @@ static void setup_dtsec(struct mac_device *mac_dev)
 	mac_dev->set_multi		= set_multi;
 	mac_dev->start			= start;
 	mac_dev->stop			= stop;
-
+	mac_dev->adjust_link            = adjust_link_dtsec;
 	mac_dev->priv->enable		= dtsec_enable;
 	mac_dev->priv->disable		= dtsec_disable;
 }
 
 static void setup_tgec(struct mac_device *mac_dev)
 {
-	mac_dev->init_phy		= tgec_init_phy;
 	mac_dev->init			= tgec_initialization;
 	mac_dev->set_promisc		= tgec_set_promiscuous;
 	mac_dev->change_addr		= tgec_modify_mac_address;
@@ -547,14 +491,13 @@ static void setup_tgec(struct mac_device *mac_dev)
 	mac_dev->set_multi		= set_multi;
 	mac_dev->start			= start;
 	mac_dev->stop			= stop;
-
+	mac_dev->adjust_link            = adjust_link_void;
 	mac_dev->priv->enable		= tgec_enable;
 	mac_dev->priv->disable		= tgec_disable;
 }
 
 static void setup_memac(struct mac_device *mac_dev)
 {
-	mac_dev->init_phy		= memac_init_phy;
 	mac_dev->init			= memac_initialization;
 	mac_dev->set_promisc		= memac_set_promiscuous;
 	mac_dev->change_addr		= memac_modify_mac_address;
@@ -566,7 +509,7 @@ static void setup_memac(struct mac_device *mac_dev)
 	mac_dev->set_multi		= set_multi;
 	mac_dev->start			= start;
 	mac_dev->stop			= stop;
-
+	mac_dev->adjust_link            = adjust_link_memac;
 	mac_dev->priv->enable		= memac_enable;
 	mac_dev->priv->disable		= memac_disable;
 }
@@ -850,13 +793,13 @@ static int mac_probe(struct platform_device *_of_dev)
 			 mac_node);
 		phy_if = PHY_INTERFACE_MODE_SGMII;
 	}
-	priv->phy_if = phy_if;
+	mac_dev->phy_if = phy_if;
 
-	priv->speed		= phy2speed[priv->phy_if];
+	priv->speed		= phy2speed[mac_dev->phy_if];
 	priv->max_speed		= priv->speed;
 	mac_dev->if_support	= DTSEC_SUPPORTED;
 	/* We don't support half-duplex in SGMII mode */
-	if (priv->phy_if == PHY_INTERFACE_MODE_SGMII)
+	if (mac_dev->phy_if == PHY_INTERFACE_MODE_SGMII)
 		mac_dev->if_support &= ~(SUPPORTED_10baseT_Half |
 					SUPPORTED_100baseT_Half);
 
@@ -865,12 +808,12 @@ static int mac_probe(struct platform_device *_of_dev)
 		mac_dev->if_support |= SUPPORTED_1000baseT_Full;
 
 	/* The 10G interface only supports one mode */
-	if (priv->phy_if == PHY_INTERFACE_MODE_XGMII)
+	if (mac_dev->phy_if == PHY_INTERFACE_MODE_XGMII)
 		mac_dev->if_support = SUPPORTED_10000baseT_Full;
 
 	/* Get the rest of the PHY information */
-	priv->phy_node = of_parse_phandle(mac_node, "phy-handle", 0);
-	if (!priv->phy_node && of_phy_is_fixed_link(mac_node)) {
+	mac_dev->phy_node = of_parse_phandle(mac_node, "phy-handle", 0);
+	if (!mac_dev->phy_node && of_phy_is_fixed_link(mac_node)) {
 		struct phy_device *phy;
 
 		err = of_phy_register_fixed_link(mac_node);
@@ -884,8 +827,8 @@ static int mac_probe(struct platform_device *_of_dev)
 			goto _return_dev_set_drvdata;
 		}
 
-		priv->phy_node = of_node_get(mac_node);
-		phy = of_phy_find_device(priv->phy_node);
+		mac_dev->phy_node = of_node_get(mac_node);
+		phy = of_phy_find_device(mac_dev->phy_node);
 		if (!phy) {
 			err = -EINVAL;
 			goto _return_dev_set_drvdata;
@@ -903,7 +846,7 @@ static int mac_probe(struct platform_device *_of_dev)
 	err = mac_dev->init(mac_dev);
 	if (err < 0) {
 		dev_err(dev, "mac_dev->init() = %d\n", err);
-		of_node_put(priv->phy_node);
+		of_node_put(mac_dev->phy_node);
 		goto _return_dev_set_drvdata;
 	}
 
diff --git a/drivers/net/ethernet/freescale/fman/mac.h b/drivers/net/ethernet/freescale/fman/mac.h
index d7313f0..1ca85a1 100644
--- a/drivers/net/ethernet/freescale/fman/mac.h
+++ b/drivers/net/ethernet/freescale/fman/mac.h
@@ -50,6 +50,8 @@ struct mac_device {
 	struct fman_port	*port[2];
 	u32			 if_support;
 	struct phy_device	*phy_dev;
+	phy_interface_t		phy_if;
+	struct device_node	*phy_node;
 
 	bool autoneg_pause;
 	bool rx_pause_req;
@@ -58,11 +60,10 @@ struct mac_device {
 	bool tx_pause_active;
 	bool promisc;
 
-	struct phy_device *(*init_phy)(struct net_device *net_dev,
-				       struct mac_device *mac_dev);
 	int (*init)(struct mac_device *mac_dev);
 	int (*start)(struct mac_device *mac_dev);
 	int (*stop)(struct mac_device *mac_dev);
+	void (*adjust_link)(struct mac_device *mac_dev);
 	int (*set_promisc)(struct fman_mac *mac_dev, bool enable);
 	int (*change_addr)(struct fman_mac *mac_dev, enet_addr_t *enet_addr);
 	int (*set_multi)(struct net_device *net_dev,
-- 
2.1.0

  parent reply	other threads:[~2017-10-10 14:10 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-10-10 14:10 [PATCH 0/4] adapt DPAA drivers for DSA Madalin Bucur
2017-10-10 14:10 ` [PATCH 1/4] fsl/fman: remove of_node Madalin Bucur
2017-10-10 14:10 ` Madalin Bucur [this message]
2017-10-10 14:10 ` [PATCH 3/4] dpaa_eth: change device used Madalin Bucur
2017-10-11 21:02   ` David Miller
2017-10-12  9:11     ` Madalin-cristian Bucur
2017-10-12  9:11       ` Madalin-cristian Bucur
2017-10-10 14:10 ` [PATCH 4/4] fsl/fman: add dpaa in module names Madalin Bucur

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1507644618-32006-3-git-send-email-madalin.bucur@nxp.com \
    --to=madalin.bucur@nxp.com \
    --cc=andrew@lunn.ch \
    --cc=davem@davemloft.net \
    --cc=f.fainelli@gmail.com \
    --cc=junote@outlook.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=netdev@vger.kernel.org \
    --cc=vivien.didelot@savoirfairelinux.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.