* [PATCH] wireless-regdb: convert remaining values in mW to equivalent dBm
@ 2017-10-25 4:45 ` Ryan Mounce
0 siblings, 0 replies; 4+ messages in thread
From: Ryan Mounce @ 2017-10-25 4:45 UTC (permalink / raw)
To: seth.forshee; +Cc: wireless-regdb, linux-wireless, Ryan Mounce
This patch converts the few remaining rules specified in mW to directly
equivalent rules in dBm, to improve consistency of the regdb.
Signed-off-by: Ryan Mounce <ryan@mounce.com.au>
---
db.txt | 64 ++++++++++++++++++++++++++++++++--------------------------------
1 file changed, 32 insertions(+), 32 deletions(-)
diff --git a/db.txt b/db.txt
index 9d129f2..8ea5a66 100644
--- a/db.txt
+++ b/db.txt
@@ -305,7 +305,7 @@ country CR: DFS-FCC
# - Redes Informáticas
# Resolución 127, 2011 - Reglamento Banda 2,4 GHz.
country CU: DFS-FCC
- (2400 - 2483.5 @ 40), (200 mW)
+ (2400 - 2483.5 @ 40), (23)
country CX: DFS-FCC
(2402 - 2482 @ 40), (20)
@@ -327,10 +327,10 @@ country CY: DFS-ETSI
# Power at 5250 - 5350 MHz and 5470 - 5725 MHz can be doubled if TPC is
# implemented.
country CZ: DFS-ETSI
- (2400 - 2483.5 @ 40), (100 mW)
- (5150 - 5250 @ 80), (200 mW), NO-OUTDOOR, AUTO-BW
- (5250 - 5350 @ 80), (100 mW), NO-OUTDOOR, DFS, AUTO-BW
- (5470 - 5725 @ 160), (500 mW), DFS
+ (2400 - 2483.5 @ 40), (20)
+ (5150 - 5250 @ 80), (23), NO-OUTDOOR, AUTO-BW
+ (5250 - 5350 @ 80), (20), NO-OUTDOOR, DFS, AUTO-BW
+ (5470 - 5725 @ 160), (27), DFS
# 60 GHz band channels 1-4, ref: Etsi En 302 567
(57000 - 66000 @ 2160), (40)
@@ -362,12 +362,12 @@ country CZ: DFS-ETSI
# https://www.bundesnetzagentur.de/SharedDocs/Downloads/DE/Sachgebiete/Telekommunikation/Unternehmen_Institutionen/Frequenzen/Allgemeinzuteilungen/2011_08_MGWS_pdf.pdf
country DE: DFS-ETSI
- (2400 - 2483.5 @ 40), (100 mW)
- (5150 - 5250 @ 80), (100 mW), NO-OUTDOOR, AUTO-BW
- (5250 - 5350 @ 80), (100 mW), NO-OUTDOOR, DFS, AUTO-BW
- (5470 - 5725 @ 160), (500 mW), DFS
+ (2400 - 2483.5 @ 40), (20)
+ (5150 - 5250 @ 80), (20), NO-OUTDOOR, AUTO-BW
+ (5250 - 5350 @ 80), (20), NO-OUTDOOR, DFS, AUTO-BW
+ (5470 - 5725 @ 160), (27), DFS
# short range devices (ETSI EN 300 440-1)
- (5725 - 5875 @ 80), (25 mW)
+ (5725 - 5875 @ 80), (14)
# 60 GHz band channels 1-4 (ETSI EN 302 567)
(57000 - 66000 @ 2160), (40)
@@ -427,12 +427,12 @@ country EG: DFS-ETSI
# http://www.minetur.gob.es/telecomunicaciones/espectro/paginas/cnaf.aspx
country ES: DFS-ETSI
- (2400 - 2483.5 @ 40), (100 mW)
- (5150 - 5250 @ 80), (200 mW), NO-OUTDOOR, AUTO-BW
- (5250 - 5350 @ 80), (100 mW), NO-OUTDOOR, DFS, AUTO-BW
- (5470 - 5725 @ 160), (500 mW), DFS
+ (2400 - 2483.5 @ 40), (20)
+ (5150 - 5250 @ 80), (23), NO-OUTDOOR, AUTO-BW
+ (5250 - 5350 @ 80), (20), NO-OUTDOOR, DFS, AUTO-BW
+ (5470 - 5725 @ 160), (27), DFS
# Short Range Devices (SRD) (ETSI EN 300 440)
- (5725 - 5875 @ 80), (25 mW)
+ (5725 - 5875 @ 80), (14)
# 60 GHz band channels 1-4, ref: Etsi En 302 567
(57000 - 66000 @ 2160), (40)
@@ -589,8 +589,8 @@ country IE: DFS-ETSI
country IL: DFS-ETSI
(2402 - 2482 @ 40), (20)
- (5150 - 5250 @ 80), (200 mW), NO-OUTDOOR, AUTO-BW
- (5250 - 5350 @ 80), (200 mW), NO-OUTDOOR, DFS, AUTO-BW
+ (5150 - 5250 @ 80), (23), NO-OUTDOOR, AUTO-BW
+ (5250 - 5350 @ 80), (23), NO-OUTDOOR, DFS, AUTO-BW
country IN:
(2402 - 2482 @ 40), (20)
@@ -639,7 +639,7 @@ country JP: DFS-JP
(5490 - 5710 @ 160), (23), DFS
# 60 GHz band channels 2-4 at 10mW,
# ref: http://www.arib.or.jp/english/html/overview/doc/1-STD-T74v1_1.pdf
- (59000 - 66000 @ 2160), (10 mW)
+ (59000 - 66000 @ 2160), (10)
country KE: DFS-JP
(2402 - 2482 @ 40), (20)
@@ -856,10 +856,10 @@ country MU: DFS-FCC
# Source:
# http://www.cam.gov.mv/docs/tech_standards/TAM-TS-100-2004-WLAN.pdf
country MV: DFS-ETSI
- (2400 - 2483.5 @ 40), (100 mW)
- (5150 - 5250 @ 80), (200 mW), AUTO-BW
- (5250 - 5350 @ 80), (100 mW), DFS, AUTO-BW
- (5725 - 5850 @ 80), (100 mW)
+ (2400 - 2483.5 @ 40), (20)
+ (5150 - 5250 @ 80), (23), AUTO-BW
+ (5250 - 5350 @ 80), (20), DFS, AUTO-BW
+ (5725 - 5850 @ 80), (20)
country MW: DFS-ETSI
(2402 - 2482 @ 40), (20)
@@ -904,7 +904,7 @@ country NL: DFS-ETSI
(5250 - 5330 @ 80), (20), NO-OUTDOOR, DFS, AUTO-BW
(5490 - 5710 @ 160), (27), DFS
# short range devices (ETSI EN 300 440-1)
- (5725 - 5875 @ 80), (25 mW)
+ (5725 - 5875 @ 80), (14)
# 60 GHz band channels 1-4, ref: Etsi En 302 567
(57000 - 66000 @ 2160), (40)
@@ -914,12 +914,12 @@ country NL: DFS-ETSI
# Up to 2W (or 4W with TPC) is allowed in the 5725 – 5795 MHz band
# which has been merged with 5470 - 5725 MHz to allow wide channels
country NO: DFS-ETSI
- (2400 - 2483.5 @ 40), (100 mW)
- (5150 - 5250 @ 80), (200 mW), AUTO-BW
- (5250 - 5350 @ 80), (100 mW), DFS, AUTO-BW
- (5470 - 5795 @ 160), (500 mW), DFS
- (5815 - 5850 @ 35), (2000 mW), DFS
- (17100 - 17300 @ 200), (100 mW)
+ (2400 - 2483.5 @ 40), (20)
+ (5150 - 5250 @ 80), (23), AUTO-BW
+ (5250 - 5350 @ 80), (20), DFS, AUTO-BW
+ (5470 - 5795 @ 160), (27), DFS
+ (5815 - 5850 @ 35), (33), DFS
+ (17100 - 17300 @ 200), (20)
# 60 GHz band channels 1-4, ref: Etsi En 302 567
(57000 - 66000 @ 2160), (40)
@@ -1044,9 +1044,9 @@ country RO: DFS-ETSI
# Source:
# http://www.ratel.rs/upload/documents/Plan_namene/Plan_namene-sl_glasnik.pdf
country RS: DFS-ETSI
- (2400 - 2483.5 @ 40), (100 mW)
- (5150 - 5350 @ 40), (200 mW), NO-OUTDOOR
- (5470 - 5725 @ 20), (1000 mW), DFS
+ (2400 - 2483.5 @ 40), (20)
+ (5150 - 5350 @ 40), (23), NO-OUTDOOR
+ (5470 - 5725 @ 20), (30), DFS
# 60 GHz band channels 1-4, ref: Etsi En 302 567
(57000 - 66000 @ 2160), (40)
--
2.13.5 (Apple Git-94)
^ permalink raw reply related [flat|nested] 4+ messages in thread
* [wireless-regdb] [PATCH] wireless-regdb: convert remaining values in mW to equivalent dBm
@ 2017-10-25 4:45 ` Ryan Mounce
0 siblings, 0 replies; 4+ messages in thread
From: Ryan Mounce @ 2017-10-25 4:45 UTC (permalink / raw)
To: seth.forshee; +Cc: Ryan Mounce, linux-wireless, wireless-regdb
This patch converts the few remaining rules specified in mW to directly
equivalent rules in dBm, to improve consistency of the regdb.
Signed-off-by: Ryan Mounce <ryan@mounce.com.au>
---
db.txt | 64 ++++++++++++++++++++++++++++++++--------------------------------
1 file changed, 32 insertions(+), 32 deletions(-)
diff --git a/db.txt b/db.txt
index 9d129f2..8ea5a66 100644
--- a/db.txt
+++ b/db.txt
@@ -305,7 +305,7 @@ country CR: DFS-FCC
# - Redes Informáticas
# Resolución 127, 2011 - Reglamento Banda 2,4 GHz.
country CU: DFS-FCC
- (2400 - 2483.5 @ 40), (200 mW)
+ (2400 - 2483.5 @ 40), (23)
country CX: DFS-FCC
(2402 - 2482 @ 40), (20)
@@ -327,10 +327,10 @@ country CY: DFS-ETSI
# Power at 5250 - 5350 MHz and 5470 - 5725 MHz can be doubled if TPC is
# implemented.
country CZ: DFS-ETSI
- (2400 - 2483.5 @ 40), (100 mW)
- (5150 - 5250 @ 80), (200 mW), NO-OUTDOOR, AUTO-BW
- (5250 - 5350 @ 80), (100 mW), NO-OUTDOOR, DFS, AUTO-BW
- (5470 - 5725 @ 160), (500 mW), DFS
+ (2400 - 2483.5 @ 40), (20)
+ (5150 - 5250 @ 80), (23), NO-OUTDOOR, AUTO-BW
+ (5250 - 5350 @ 80), (20), NO-OUTDOOR, DFS, AUTO-BW
+ (5470 - 5725 @ 160), (27), DFS
# 60 GHz band channels 1-4, ref: Etsi En 302 567
(57000 - 66000 @ 2160), (40)
@@ -362,12 +362,12 @@ country CZ: DFS-ETSI
# https://www.bundesnetzagentur.de/SharedDocs/Downloads/DE/Sachgebiete/Telekommunikation/Unternehmen_Institutionen/Frequenzen/Allgemeinzuteilungen/2011_08_MGWS_pdf.pdf
country DE: DFS-ETSI
- (2400 - 2483.5 @ 40), (100 mW)
- (5150 - 5250 @ 80), (100 mW), NO-OUTDOOR, AUTO-BW
- (5250 - 5350 @ 80), (100 mW), NO-OUTDOOR, DFS, AUTO-BW
- (5470 - 5725 @ 160), (500 mW), DFS
+ (2400 - 2483.5 @ 40), (20)
+ (5150 - 5250 @ 80), (20), NO-OUTDOOR, AUTO-BW
+ (5250 - 5350 @ 80), (20), NO-OUTDOOR, DFS, AUTO-BW
+ (5470 - 5725 @ 160), (27), DFS
# short range devices (ETSI EN 300 440-1)
- (5725 - 5875 @ 80), (25 mW)
+ (5725 - 5875 @ 80), (14)
# 60 GHz band channels 1-4 (ETSI EN 302 567)
(57000 - 66000 @ 2160), (40)
@@ -427,12 +427,12 @@ country EG: DFS-ETSI
# http://www.minetur.gob.es/telecomunicaciones/espectro/paginas/cnaf.aspx
country ES: DFS-ETSI
- (2400 - 2483.5 @ 40), (100 mW)
- (5150 - 5250 @ 80), (200 mW), NO-OUTDOOR, AUTO-BW
- (5250 - 5350 @ 80), (100 mW), NO-OUTDOOR, DFS, AUTO-BW
- (5470 - 5725 @ 160), (500 mW), DFS
+ (2400 - 2483.5 @ 40), (20)
+ (5150 - 5250 @ 80), (23), NO-OUTDOOR, AUTO-BW
+ (5250 - 5350 @ 80), (20), NO-OUTDOOR, DFS, AUTO-BW
+ (5470 - 5725 @ 160), (27), DFS
# Short Range Devices (SRD) (ETSI EN 300 440)
- (5725 - 5875 @ 80), (25 mW)
+ (5725 - 5875 @ 80), (14)
# 60 GHz band channels 1-4, ref: Etsi En 302 567
(57000 - 66000 @ 2160), (40)
@@ -589,8 +589,8 @@ country IE: DFS-ETSI
country IL: DFS-ETSI
(2402 - 2482 @ 40), (20)
- (5150 - 5250 @ 80), (200 mW), NO-OUTDOOR, AUTO-BW
- (5250 - 5350 @ 80), (200 mW), NO-OUTDOOR, DFS, AUTO-BW
+ (5150 - 5250 @ 80), (23), NO-OUTDOOR, AUTO-BW
+ (5250 - 5350 @ 80), (23), NO-OUTDOOR, DFS, AUTO-BW
country IN:
(2402 - 2482 @ 40), (20)
@@ -639,7 +639,7 @@ country JP: DFS-JP
(5490 - 5710 @ 160), (23), DFS
# 60 GHz band channels 2-4 at 10mW,
# ref: http://www.arib.or.jp/english/html/overview/doc/1-STD-T74v1_1.pdf
- (59000 - 66000 @ 2160), (10 mW)
+ (59000 - 66000 @ 2160), (10)
country KE: DFS-JP
(2402 - 2482 @ 40), (20)
@@ -856,10 +856,10 @@ country MU: DFS-FCC
# Source:
# http://www.cam.gov.mv/docs/tech_standards/TAM-TS-100-2004-WLAN.pdf
country MV: DFS-ETSI
- (2400 - 2483.5 @ 40), (100 mW)
- (5150 - 5250 @ 80), (200 mW), AUTO-BW
- (5250 - 5350 @ 80), (100 mW), DFS, AUTO-BW
- (5725 - 5850 @ 80), (100 mW)
+ (2400 - 2483.5 @ 40), (20)
+ (5150 - 5250 @ 80), (23), AUTO-BW
+ (5250 - 5350 @ 80), (20), DFS, AUTO-BW
+ (5725 - 5850 @ 80), (20)
country MW: DFS-ETSI
(2402 - 2482 @ 40), (20)
@@ -904,7 +904,7 @@ country NL: DFS-ETSI
(5250 - 5330 @ 80), (20), NO-OUTDOOR, DFS, AUTO-BW
(5490 - 5710 @ 160), (27), DFS
# short range devices (ETSI EN 300 440-1)
- (5725 - 5875 @ 80), (25 mW)
+ (5725 - 5875 @ 80), (14)
# 60 GHz band channels 1-4, ref: Etsi En 302 567
(57000 - 66000 @ 2160), (40)
@@ -914,12 +914,12 @@ country NL: DFS-ETSI
# Up to 2W (or 4W with TPC) is allowed in the 5725 – 5795 MHz band
# which has been merged with 5470 - 5725 MHz to allow wide channels
country NO: DFS-ETSI
- (2400 - 2483.5 @ 40), (100 mW)
- (5150 - 5250 @ 80), (200 mW), AUTO-BW
- (5250 - 5350 @ 80), (100 mW), DFS, AUTO-BW
- (5470 - 5795 @ 160), (500 mW), DFS
- (5815 - 5850 @ 35), (2000 mW), DFS
- (17100 - 17300 @ 200), (100 mW)
+ (2400 - 2483.5 @ 40), (20)
+ (5150 - 5250 @ 80), (23), AUTO-BW
+ (5250 - 5350 @ 80), (20), DFS, AUTO-BW
+ (5470 - 5795 @ 160), (27), DFS
+ (5815 - 5850 @ 35), (33), DFS
+ (17100 - 17300 @ 200), (20)
# 60 GHz band channels 1-4, ref: Etsi En 302 567
(57000 - 66000 @ 2160), (40)
@@ -1044,9 +1044,9 @@ country RO: DFS-ETSI
# Source:
# http://www.ratel.rs/upload/documents/Plan_namene/Plan_namene-sl_glasnik.pdf
country RS: DFS-ETSI
- (2400 - 2483.5 @ 40), (100 mW)
- (5150 - 5350 @ 40), (200 mW), NO-OUTDOOR
- (5470 - 5725 @ 20), (1000 mW), DFS
+ (2400 - 2483.5 @ 40), (20)
+ (5150 - 5350 @ 40), (23), NO-OUTDOOR
+ (5470 - 5725 @ 20), (30), DFS
# 60 GHz band channels 1-4, ref: Etsi En 302 567
(57000 - 66000 @ 2160), (40)
--
2.13.5 (Apple Git-94)
_______________________________________________
wireless-regdb mailing list
wireless-regdb@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/wireless-regdb
^ permalink raw reply related [flat|nested] 4+ messages in thread
* Re: [PATCH] wireless-regdb: convert remaining values in mW to equivalent dBm
2017-10-25 4:45 ` [wireless-regdb] " Ryan Mounce
@ 2017-10-25 7:17 ` Johannes Berg
-1 siblings, 0 replies; 4+ messages in thread
From: Johannes Berg @ 2017-10-25 7:17 UTC (permalink / raw)
To: Ryan Mounce, seth.forshee; +Cc: wireless-regdb, linux-wireless
On Wed, 2017-10-25 at 15:15 +1030, Ryan Mounce wrote:
> This patch converts the few remaining rules specified in mW to directly
> equivalent rules in dBm, to improve consistency of the regdb.
I don't know if this is the case for all cases here, but IMHO
consistency with the source documents (which are actually listed in
many of the entries you're changing), is more important than
consistency within the file.
johannes
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [wireless-regdb] [PATCH] wireless-regdb: convert remaining values in mW to equivalent dBm
@ 2017-10-25 7:17 ` Johannes Berg
0 siblings, 0 replies; 4+ messages in thread
From: Johannes Berg @ 2017-10-25 7:17 UTC (permalink / raw)
To: Ryan Mounce, seth.forshee; +Cc: linux-wireless, wireless-regdb
On Wed, 2017-10-25 at 15:15 +1030, Ryan Mounce wrote:
> This patch converts the few remaining rules specified in mW to directly
> equivalent rules in dBm, to improve consistency of the regdb.
I don't know if this is the case for all cases here, but IMHO
consistency with the source documents (which are actually listed in
many of the entries you're changing), is more important than
consistency within the file.
johannes
_______________________________________________
wireless-regdb mailing list
wireless-regdb@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/wireless-regdb
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2017-10-25 7:18 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2017-10-25 4:45 [PATCH] wireless-regdb: convert remaining values in mW to equivalent dBm Ryan Mounce
2017-10-25 4:45 ` [wireless-regdb] " Ryan Mounce
2017-10-25 7:17 ` Johannes Berg
2017-10-25 7:17 ` [wireless-regdb] " Johannes Berg
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.