* [PATCH v7 3/3] intel-ipu3: cio2: Add new MIPI-CSI2 driver
2017-11-02 19:59 [PATCH v7 0/3] add IPU3 CIO2 CSI2 driver Yong Zhi
2017-11-02 19:59 ` [PATCH v7 1/3] videodev2.h, v4l2-ioctl: add IPU3 raw10 color format Yong Zhi
2017-11-02 20:00 ` [PATCH v7 2/3] doc-rst: add IPU3 raw10 bayer pixel format definitions Yong Zhi
@ 2017-11-02 20:00 ` Yong Zhi
2017-11-02 22:41 ` Sakari Ailus
2 siblings, 1 reply; 8+ messages in thread
From: Yong Zhi @ 2017-11-02 20:00 UTC (permalink / raw)
To: linux-media, sakari.ailus
Cc: jian.xu.zheng, tfiga, rajmohan.mani, tuukka.toivonen,
hyungwoo.yang, chiranjeevi.rapolu, jerry.w.hu, Yong Zhi,
Vijaykumar Ramya
This patch adds CIO2 CSI-2 device driver for
Intel's IPU3 camera sub-system support.
Signed-off-by: Yong Zhi <yong.zhi@intel.com>
Signed-off-by: Hyungwoo Yang <hyungwoo.yang@intel.com>
Signed-off-by: Rajmohan Mani <rajmohan.mani@intel.com>
Signed-off-by: Vijaykumar Ramya <ramya.vijaykumar@intel.com>
---
drivers/media/pci/Kconfig | 2 +
drivers/media/pci/Makefile | 3 +-
drivers/media/pci/intel/Makefile | 5 +
drivers/media/pci/intel/ipu3/Kconfig | 19 +
drivers/media/pci/intel/ipu3/Makefile | 1 +
drivers/media/pci/intel/ipu3/ipu3-cio2.c | 2053 ++++++++++++++++++++++++++++++
drivers/media/pci/intel/ipu3/ipu3-cio2.h | 449 +++++++
7 files changed, 2531 insertions(+), 1 deletion(-)
create mode 100644 drivers/media/pci/intel/Makefile
create mode 100644 drivers/media/pci/intel/ipu3/Kconfig
create mode 100644 drivers/media/pci/intel/ipu3/Makefile
create mode 100644 drivers/media/pci/intel/ipu3/ipu3-cio2.c
create mode 100644 drivers/media/pci/intel/ipu3/ipu3-cio2.h
diff --git a/drivers/media/pci/Kconfig b/drivers/media/pci/Kconfig
index da28e68c87d8..5932e225f9c0 100644
--- a/drivers/media/pci/Kconfig
+++ b/drivers/media/pci/Kconfig
@@ -54,5 +54,7 @@ source "drivers/media/pci/smipcie/Kconfig"
source "drivers/media/pci/netup_unidvb/Kconfig"
endif
+source "drivers/media/pci/intel/ipu3/Kconfig"
+
endif #MEDIA_PCI_SUPPORT
endif #PCI
diff --git a/drivers/media/pci/Makefile b/drivers/media/pci/Makefile
index a7e8af0f64a7..d8f98434fb8c 100644
--- a/drivers/media/pci/Makefile
+++ b/drivers/media/pci/Makefile
@@ -13,7 +13,8 @@ obj-y += ttpci/ \
ddbridge/ \
saa7146/ \
smipcie/ \
- netup_unidvb/
+ netup_unidvb/ \
+ intel/
obj-$(CONFIG_VIDEO_IVTV) += ivtv/
obj-$(CONFIG_VIDEO_ZORAN) += zoran/
diff --git a/drivers/media/pci/intel/Makefile b/drivers/media/pci/intel/Makefile
new file mode 100644
index 000000000000..745c8b2a7819
--- /dev/null
+++ b/drivers/media/pci/intel/Makefile
@@ -0,0 +1,5 @@
+#
+# Makefile for the IPU3 cio2 and ImGU drivers
+#
+
+obj-y += ipu3/
diff --git a/drivers/media/pci/intel/ipu3/Kconfig b/drivers/media/pci/intel/ipu3/Kconfig
new file mode 100644
index 000000000000..4bb8e0e97e49
--- /dev/null
+++ b/drivers/media/pci/intel/ipu3/Kconfig
@@ -0,0 +1,19 @@
+config VIDEO_IPU3_CIO2
+ tristate "Intel ipu3-cio2 driver"
+ depends on VIDEO_V4L2 && PCI
+ depends on VIDEO_V4L2_SUBDEV_API
+ depends on X86 || COMPILE_TEST
+ depends on MEDIA_CONTROLLER
+ depends on HAS_DMA
+ depends on ACPI
+ select V4L2_FWNODE
+ select VIDEOBUF2_DMA_SG
+
+ ---help---
+ This is the Intel IPU3 CIO2 CSI-2 receiver unit, found in Intel
+ Skylake and Kaby Lake SoCs and used for capturing images and
+ video from a camera sensor.
+
+ Say Y or M here if you have a Skylake/Kaby Lake SoC with MIPI CSI-2
+ connected camera.
+ The module will be called ipu3-cio2.
diff --git a/drivers/media/pci/intel/ipu3/Makefile b/drivers/media/pci/intel/ipu3/Makefile
new file mode 100644
index 000000000000..20186e3ff2ae
--- /dev/null
+++ b/drivers/media/pci/intel/ipu3/Makefile
@@ -0,0 +1 @@
+obj-$(CONFIG_VIDEO_IPU3_CIO2) += ipu3-cio2.o
diff --git a/drivers/media/pci/intel/ipu3/ipu3-cio2.c b/drivers/media/pci/intel/ipu3/ipu3-cio2.c
new file mode 100644
index 000000000000..f750ae6f746c
--- /dev/null
+++ b/drivers/media/pci/intel/ipu3/ipu3-cio2.c
@@ -0,0 +1,2053 @@
+/*
+ * Copyright (c) 2017 Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version
+ * 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Based partially on Intel IPU4 driver written by
+ * Sakari Ailus <sakari.ailus@linux.intel.com>
+ * Samu Onkalo <samu.onkalo@intel.com>
+ * Jouni Högander <jouni.hogander@intel.com>
+ * Jouni Ukkonen <jouni.ukkonen@intel.com>
+ * Antti Laakso <antti.laakso@intel.com>
+ * et al.
+ *
+ */
+
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/pm_runtime.h>
+#include <linux/property.h>
+#include <linux/vmalloc.h>
+#include <media/v4l2-ctrls.h>
+#include <media/v4l2-device.h>
+#include <media/v4l2-event.h>
+#include <media/v4l2-fwnode.h>
+#include <media/v4l2-ioctl.h>
+#include <media/videobuf2-dma-sg.h>
+
+#include "ipu3-cio2.h"
+
+struct ipu3_cio2_fmt {
+ u32 mbus_code;
+ u32 fourcc;
+ u8 mipicode;
+};
+
+/*
+ * These are raw formats used in Intel's third generation of
+ * Image Processing Unit known as IPU3.
+ * 10bit raw bayer packed, 32 bytes for every 25 pixels,
+ * last LSB 6 bits unused.
+ */
+static const struct ipu3_cio2_fmt formats[] = {
+ { /* put default entry at beginning */
+ .mbus_code = MEDIA_BUS_FMT_SGRBG10_1X10,
+ .fourcc = V4L2_PIX_FMT_IPU3_SGRBG10,
+ .mipicode = 0x2b,
+ }, {
+ .mbus_code = MEDIA_BUS_FMT_SGBRG10_1X10,
+ .fourcc = V4L2_PIX_FMT_IPU3_SGBRG10,
+ .mipicode = 0x2b,
+ }, {
+ .mbus_code = MEDIA_BUS_FMT_SBGGR10_1X10,
+ .fourcc = V4L2_PIX_FMT_IPU3_SBGGR10,
+ .mipicode = 0x2b,
+ }, {
+ .mbus_code = MEDIA_BUS_FMT_SRGGB10_1X10,
+ .fourcc = V4L2_PIX_FMT_IPU3_SRGGB10,
+ .mipicode = 0x2b,
+ },
+};
+
+/*
+ * cio2_find_format - lookup color format by fourcc or/and media bus code
+ * @pixelformat: fourcc to match, ignored if null
+ * @mbus_code: media bus code to match, ignored if null
+ */
+static const struct ipu3_cio2_fmt *cio2_find_format(const u32 *pixelformat,
+ const u32 *mbus_code)
+{
+ unsigned int i;
+
+ for (i = 0; i < ARRAY_SIZE(formats); i++) {
+ if (pixelformat && *pixelformat != formats[i].fourcc)
+ continue;
+ if (mbus_code && *mbus_code != formats[i].mbus_code)
+ continue;
+
+ return &formats[i];
+ }
+
+ return NULL;
+}
+
+static inline u32 cio2_bytesperline(const unsigned int width)
+{
+ /*
+ * 64 bytes for every 50 pixels, the line length
+ * in bytes is multiple of 64 (line end alignment).
+ */
+ return DIV_ROUND_UP(width, 50) * 64;
+}
+
+/**************** FBPT operations ****************/
+
+static void cio2_fbpt_exit_dummy(struct cio2_device *cio2)
+{
+ if (cio2->dummy_lop) {
+ dma_free_coherent(&cio2->pci_dev->dev, CIO2_PAGE_SIZE,
+ cio2->dummy_lop, cio2->dummy_lop_bus_addr);
+ cio2->dummy_lop = NULL;
+ }
+ if (cio2->dummy_page) {
+ dma_free_coherent(&cio2->pci_dev->dev, CIO2_PAGE_SIZE,
+ cio2->dummy_page, cio2->dummy_page_bus_addr);
+ cio2->dummy_page = NULL;
+ }
+}
+
+static int cio2_fbpt_init_dummy(struct cio2_device *cio2)
+{
+ unsigned int i;
+
+ cio2->dummy_page = dma_alloc_coherent(&cio2->pci_dev->dev,
+ CIO2_PAGE_SIZE,
+ &cio2->dummy_page_bus_addr,
+ GFP_KERNEL);
+ cio2->dummy_lop = dma_alloc_coherent(&cio2->pci_dev->dev,
+ CIO2_PAGE_SIZE,
+ &cio2->dummy_lop_bus_addr,
+ GFP_KERNEL);
+ if (!cio2->dummy_page || !cio2->dummy_lop) {
+ cio2_fbpt_exit_dummy(cio2);
+ return -ENOMEM;
+ }
+ /*
+ * List of Pointers(LOP) contains 1024x32b pointers to 4KB page each
+ * Initialize each entry to dummy_page bus base address.
+ */
+ for (i = 0; i < CIO2_PAGE_SIZE / sizeof(*cio2->dummy_lop); i++)
+ cio2->dummy_lop[i] = cio2->dummy_page_bus_addr >> PAGE_SHIFT;
+
+ return 0;
+}
+
+static void cio2_fbpt_entry_enable(struct cio2_device *cio2,
+ struct cio2_fbpt_entry entry[CIO2_MAX_LOPS])
+{
+ /*
+ * The CPU first initializes some fields in fbpt, then sets
+ * the VALID bit, this barrier is to ensure that the DMA(device)
+ * does not see the VALID bit enabled before other fields are
+ * initialized; otherwise it could lead to havoc.
+ */
+ dma_wmb();
+
+ /*
+ * Request interrupts for start and completion
+ * Valid bit is applicable only to 1st entry
+ */
+ entry[0].first_entry.ctrl = CIO2_FBPT_CTRL_VALID |
+ CIO2_FBPT_CTRL_IOC | CIO2_FBPT_CTRL_IOS;
+}
+
+/* Initialize fpbt entries to point to dummy frame */
+static void cio2_fbpt_entry_init_dummy(struct cio2_device *cio2,
+ struct cio2_fbpt_entry
+ entry[CIO2_MAX_LOPS])
+{
+ unsigned int i;
+
+ entry[0].first_entry.first_page_offset = 0;
+ entry[1].second_entry.num_of_pages =
+ CIO2_PAGE_SIZE / sizeof(u32) * CIO2_MAX_LOPS;
+ entry[1].second_entry.last_page_available_bytes = CIO2_PAGE_SIZE - 1;
+
+ for (i = 0; i < CIO2_MAX_LOPS; i++)
+ entry[i].lop_page_addr = cio2->dummy_lop_bus_addr >> PAGE_SHIFT;
+
+ cio2_fbpt_entry_enable(cio2, entry);
+}
+
+/* Initialize fpbt entries to point to a given buffer */
+static void cio2_fbpt_entry_init_buf(struct cio2_device *cio2,
+ struct cio2_buffer *b,
+ struct cio2_fbpt_entry
+ entry[CIO2_MAX_LOPS])
+{
+ struct vb2_buffer *vb = &b->vbb.vb2_buf;
+ unsigned int length = vb->planes[0].length;
+ int remaining, i;
+
+ entry[0].first_entry.first_page_offset = b->offset;
+ remaining = length + entry[0].first_entry.first_page_offset;
+ entry[1].second_entry.num_of_pages =
+ DIV_ROUND_UP(remaining, CIO2_PAGE_SIZE);
+ /*
+ * last_page_available_bytes has the offset of the last byte in the
+ * last page which is still accessible by DMA. DMA cannot access
+ * beyond this point. Valid range for this is from 0 to 4095.
+ * 0 indicates 1st byte in the page is DMA accessible.
+ * 4095 (CIO2_PAGE_SIZE - 1) means every single byte in the last page
+ * is available for DMA transfer.
+ */
+ entry[1].second_entry.last_page_available_bytes =
+ (remaining & ~PAGE_MASK) ?
+ (remaining & ~PAGE_MASK) - 1 :
+ CIO2_PAGE_SIZE - 1;
+ /* Fill FBPT */
+ remaining = length;
+ i = 0;
+ while (remaining > 0) {
+ entry->lop_page_addr = b->lop_bus_addr[i] >> PAGE_SHIFT;
+ remaining -= CIO2_PAGE_SIZE / sizeof(u32) * CIO2_PAGE_SIZE;
+ entry++;
+ i++;
+ }
+
+ /*
+ * The first not meaningful FBPT entry should point to a valid LOP
+ */
+ entry->lop_page_addr = cio2->dummy_lop_bus_addr >> PAGE_SHIFT;
+
+ cio2_fbpt_entry_enable(cio2, entry);
+}
+
+static int cio2_fbpt_init(struct cio2_device *cio2, struct cio2_queue *q)
+{
+ struct device *dev = &cio2->pci_dev->dev;
+
+ q->fbpt = dma_alloc_coherent(dev, CIO2_FBPT_SIZE, &q->fbpt_bus_addr,
+ GFP_KERNEL);
+ if (!q->fbpt)
+ return -ENOMEM;
+
+ memset(q->fbpt, 0, CIO2_FBPT_SIZE);
+
+ return 0;
+}
+
+/*
+ * Helper function to advance all the elements of a circular buffer by "start"
+ * positions
+ */
+static void arrange(void *ptr, size_t elem_size, size_t elems, size_t start)
+{
+ struct {
+ size_t begin, end;
+ } arr[2] = {
+ { 0, start - 1 },
+ { start, elems - 1 },
+ };
+ u8 tmp[elem_size];
+
+#define arr_size(a) ((a)->end - (a)->begin + 1)
+
+ /* Loop as long as we have out-of-place entries */
+ while (arr_size(&arr[0]) && arr_size(&arr[1])) {
+ size_t size0, i;
+
+ /*
+ * Find the number of entries that can be arranged on this
+ * iteration.
+ */
+ if (arr_size(&arr[0]) > arr_size(&arr[1]))
+ size0 = arr_size(&arr[1]);
+ else
+ size0 = arr_size(&arr[0]);
+
+ /* Swap the entries in two parts of the array. */
+ for (i = 0; i < size0; i++) {
+ memcpy(tmp, ptr + elem_size * (arr[1].begin + i),
+ elem_size);
+ memcpy(ptr + elem_size * (arr[1].begin + i),
+ ptr + elem_size * (arr[0].begin + i), elem_size);
+ memcpy(ptr + elem_size * (arr[0].begin + i), tmp,
+ elem_size);
+ }
+
+ if (arr_size(&arr[0]) > arr_size(&arr[1])) {
+ /* The end of the first array remains unarranged. */
+ arr[0].begin += size0;
+ } else {
+ /*
+ * The first array is fully arranged so we proceed
+ * handling the next one.
+ */
+ arr[0].begin = arr[1].begin;
+ arr[0].end = arr[1].begin + size0 - 1;
+ arr[1].begin += size0;
+ }
+ }
+}
+
+static int cio2_fbpt_rearrange(struct cio2_device *cio2, struct cio2_queue *q)
+{
+ unsigned int i, j;
+
+ for (i = 0, j = q->bufs_first; i < CIO2_MAX_BUFFERS;
+ i++, j = (j + 1) % CIO2_MAX_BUFFERS)
+ if (q->bufs[j])
+ break;
+
+ if (i == CIO2_MAX_BUFFERS)
+ return 0;
+
+ if (j) {
+ arrange(q->fbpt, sizeof(struct cio2_fbpt_entry) * CIO2_MAX_LOPS,
+ CIO2_MAX_BUFFERS, j);
+ arrange(q->bufs, sizeof(struct cio2_buffer *),
+ CIO2_MAX_BUFFERS, j);
+ }
+
+ /*
+ * DMA clears the valid bit when accessing the buffer.
+ * When stopping stream in suspend callback, some of the buffers
+ * may be in invalid state. After resume, when DMA meets the invalid
+ * buffer, it will halt and stop receiving new data.
+ * To avoid DMA halting, set the valid bit for all buffers in FBPT.
+ */
+ for (i = 0; i < CIO2_MAX_BUFFERS; i++)
+ cio2_fbpt_entry_enable(cio2, q->fbpt + i * CIO2_MAX_LOPS);
+
+ return 0;
+}
+
+static void cio2_fbpt_exit(struct cio2_queue *q, struct device *dev)
+{
+ dma_free_coherent(dev, CIO2_FBPT_SIZE, q->fbpt, q->fbpt_bus_addr);
+}
+
+/**************** CSI2 hardware setup ****************/
+
+/*
+ * The CSI2 receiver has several parameters affecting
+ * the receiver timings. These depend on the MIPI bus frequency
+ * F in Hz (sensor transmitter rate) as follows:
+ * register value = (A/1e9 + B * UI) / COUNT_ACC
+ * where
+ * UI = 1 / (2 * F) in seconds
+ * COUNT_ACC = counter accuracy in seconds
+ * For IPU3 COUNT_ACC = 0.0625
+ *
+ * A and B are coefficients from the table below,
+ * depending whether the register minimum or maximum value is
+ * calculated.
+ * Minimum Maximum
+ * Clock lane A B A B
+ * reg_rx_csi_dly_cnt_termen_clane 0 0 38 0
+ * reg_rx_csi_dly_cnt_settle_clane 95 -8 300 -16
+ * Data lanes
+ * reg_rx_csi_dly_cnt_termen_dlane0 0 0 35 4
+ * reg_rx_csi_dly_cnt_settle_dlane0 85 -2 145 -6
+ * reg_rx_csi_dly_cnt_termen_dlane1 0 0 35 4
+ * reg_rx_csi_dly_cnt_settle_dlane1 85 -2 145 -6
+ * reg_rx_csi_dly_cnt_termen_dlane2 0 0 35 4
+ * reg_rx_csi_dly_cnt_settle_dlane2 85 -2 145 -6
+ * reg_rx_csi_dly_cnt_termen_dlane3 0 0 35 4
+ * reg_rx_csi_dly_cnt_settle_dlane3 85 -2 145 -6
+ *
+ * We use the minimum values of both A and B.
+ */
+
+/*
+ * shift for keeping value range suitable for 32-bit integer arithmetics
+ */
+#define LIMIT_SHIFT 8
+
+static s32 cio2_rx_timing(s32 a, s32 b, s64 freq, int def)
+{
+ const u32 accinv = 16; /* invert of counter resolution */
+ const u32 uiinv = 500000000; /* 1e9 / 2 */
+ s32 r;
+
+ freq >>= LIMIT_SHIFT;
+
+ if (WARN_ON(freq <= 0 || freq > S32_MAX))
+ return def;
+ /*
+ * b could be 0, -2 or -8, so |accinv * b| is always
+ * less than (1 << ds) and thus |r| < 500000000.
+ */
+ r = accinv * b * (uiinv >> LIMIT_SHIFT);
+ r = r / (s32)freq;
+ /* max value of a is 95 */
+ r += accinv * a;
+
+ return r;
+};
+
+/* Calculate the the delay value for termination enable of clock lane HS Rx */
+static int cio2_csi2_calc_timing(struct cio2_device *cio2, struct cio2_queue *q,
+ struct cio2_csi2_timing *timing)
+{
+ struct device *dev = &cio2->pci_dev->dev;
+ struct v4l2_querymenu qm = {.id = V4L2_CID_LINK_FREQ, };
+ struct v4l2_ctrl *link_freq;
+ s64 freq;
+ int r;
+
+ if (!q->sensor)
+ return -ENODEV;
+
+ link_freq = v4l2_ctrl_find(q->sensor->ctrl_handler, V4L2_CID_LINK_FREQ);
+ if (!link_freq) {
+ dev_err(dev, "failed to find LINK_FREQ\n");
+ return -EPIPE;
+ };
+
+ qm.index = v4l2_ctrl_g_ctrl(link_freq);
+ r = v4l2_querymenu(q->sensor->ctrl_handler, &qm);
+ if (r) {
+ dev_err(dev, "failed to get menu item\n");
+ return r;
+ }
+
+ if (!qm.value) {
+ dev_err(dev, "error invalid link_freq\n");
+ return -EINVAL;
+ }
+ freq = qm.value;
+
+ timing->clk_termen = cio2_rx_timing(CIO2_CSIRX_DLY_CNT_TERMEN_CLANE_A,
+ CIO2_CSIRX_DLY_CNT_TERMEN_CLANE_B,
+ freq,
+ CIO2_CSIRX_DLY_CNT_TERMEN_DEFAULT);
+ timing->clk_settle = cio2_rx_timing(CIO2_CSIRX_DLY_CNT_SETTLE_CLANE_A,
+ CIO2_CSIRX_DLY_CNT_SETTLE_CLANE_B,
+ freq,
+ CIO2_CSIRX_DLY_CNT_SETTLE_DEFAULT);
+ timing->dat_termen = cio2_rx_timing(CIO2_CSIRX_DLY_CNT_TERMEN_DLANE_A,
+ CIO2_CSIRX_DLY_CNT_TERMEN_DLANE_B,
+ freq,
+ CIO2_CSIRX_DLY_CNT_TERMEN_DEFAULT);
+ timing->dat_settle = cio2_rx_timing(CIO2_CSIRX_DLY_CNT_SETTLE_DLANE_A,
+ CIO2_CSIRX_DLY_CNT_SETTLE_DLANE_B,
+ freq,
+ CIO2_CSIRX_DLY_CNT_SETTLE_DEFAULT);
+
+ dev_dbg(dev, "freq ct value is %d\n", timing->clk_termen);
+ dev_dbg(dev, "freq cs value is %d\n", timing->clk_settle);
+ dev_dbg(dev, "freq dt value is %d\n", timing->dat_termen);
+ dev_dbg(dev, "freq ds value is %d\n", timing->dat_settle);
+
+ return 0;
+};
+
+static int cio2_hw_init(struct cio2_device *cio2, struct cio2_queue *q)
+{
+ static const int NUM_VCS = 4;
+ static const int SID; /* Stream id */
+ static const int ENTRY;
+ static const int FBPT_WIDTH = DIV_ROUND_UP(CIO2_MAX_LOPS,
+ CIO2_FBPT_SUBENTRY_UNIT);
+ const u32 num_buffers1 = CIO2_MAX_BUFFERS - 1;
+ const struct ipu3_cio2_fmt *fmt;
+ void __iomem *const base = cio2->base;
+ u8 lanes, csi2bus = q->csi2.port;
+ u8 sensor_vc = SENSOR_VIR_CH_DFLT;
+ struct cio2_csi2_timing timing;
+ int i, r;
+
+ fmt = cio2_find_format(NULL, &q->subdev_fmt.code);
+ if (!fmt)
+ return -EINVAL;
+
+ lanes = q->csi2.lanes;
+
+ r = cio2_csi2_calc_timing(cio2, q, &timing);
+ if (r)
+ return r;
+
+ writel(timing.clk_termen, q->csi_rx_base +
+ CIO2_REG_CSIRX_DLY_CNT_TERMEN(CIO2_CSIRX_DLY_CNT_CLANE_IDX));
+ writel(timing.clk_settle, q->csi_rx_base +
+ CIO2_REG_CSIRX_DLY_CNT_SETTLE(CIO2_CSIRX_DLY_CNT_CLANE_IDX));
+
+ for (i = 0; i < lanes; i++) {
+ writel(timing.dat_termen, q->csi_rx_base +
+ CIO2_REG_CSIRX_DLY_CNT_TERMEN(i));
+ writel(timing.dat_settle, q->csi_rx_base +
+ CIO2_REG_CSIRX_DLY_CNT_SETTLE(i));
+ }
+
+ writel(CIO2_PBM_WMCTRL1_MIN_2CK |
+ CIO2_PBM_WMCTRL1_MID1_2CK |
+ CIO2_PBM_WMCTRL1_MID2_2CK, base + CIO2_REG_PBM_WMCTRL1);
+ writel(CIO2_PBM_WMCTRL2_HWM_2CK << CIO2_PBM_WMCTRL2_HWM_2CK_SHIFT |
+ CIO2_PBM_WMCTRL2_LWM_2CK << CIO2_PBM_WMCTRL2_LWM_2CK_SHIFT |
+ CIO2_PBM_WMCTRL2_OBFFWM_2CK <<
+ CIO2_PBM_WMCTRL2_OBFFWM_2CK_SHIFT |
+ CIO2_PBM_WMCTRL2_TRANSDYN << CIO2_PBM_WMCTRL2_TRANSDYN_SHIFT |
+ CIO2_PBM_WMCTRL2_OBFF_MEM_EN, base + CIO2_REG_PBM_WMCTRL2);
+ writel(CIO2_PBM_ARB_CTRL_LANES_DIV <<
+ CIO2_PBM_ARB_CTRL_LANES_DIV_SHIFT |
+ CIO2_PBM_ARB_CTRL_LE_EN |
+ CIO2_PBM_ARB_CTRL_PLL_POST_SHTDN <<
+ CIO2_PBM_ARB_CTRL_PLL_POST_SHTDN_SHIFT |
+ CIO2_PBM_ARB_CTRL_PLL_AHD_WK_UP <<
+ CIO2_PBM_ARB_CTRL_PLL_AHD_WK_UP_SHIFT,
+ base + CIO2_REG_PBM_ARB_CTRL);
+ writel(CIO2_CSIRX_STATUS_DLANE_HS_MASK,
+ q->csi_rx_base + CIO2_REG_CSIRX_STATUS_DLANE_HS);
+ writel(CIO2_CSIRX_STATUS_DLANE_LP_MASK,
+ q->csi_rx_base + CIO2_REG_CSIRX_STATUS_DLANE_LP);
+
+ writel(CIO2_FB_HPLL_FREQ, base + CIO2_REG_FB_HPLL_FREQ);
+ writel(CIO2_ISCLK_RATIO, base + CIO2_REG_ISCLK_RATIO);
+
+ /* Configure MIPI backend */
+ for (i = 0; i < NUM_VCS; i++)
+ writel(1, q->csi_rx_base + CIO2_REG_MIPIBE_SP_LUT_ENTRY(i));
+
+ /* There are 16 short packet LUT entry */
+ for (i = 0; i < 16; i++)
+ writel(CIO2_MIPIBE_LP_LUT_ENTRY_DISREGARD,
+ q->csi_rx_base + CIO2_REG_MIPIBE_LP_LUT_ENTRY(i));
+ writel(CIO2_MIPIBE_GLOBAL_LUT_DISREGARD,
+ q->csi_rx_base + CIO2_REG_MIPIBE_GLOBAL_LUT_DISREGARD);
+
+ writel(CIO2_INT_EN_EXT_IE_MASK, base + CIO2_REG_INT_EN_EXT_IE);
+ writel(CIO2_IRQCTRL_MASK, q->csi_rx_base + CIO2_REG_IRQCTRL_MASK);
+ writel(CIO2_IRQCTRL_MASK, q->csi_rx_base + CIO2_REG_IRQCTRL_ENABLE);
+ writel(0, q->csi_rx_base + CIO2_REG_IRQCTRL_EDGE);
+ writel(0, q->csi_rx_base + CIO2_REG_IRQCTRL_LEVEL_NOT_PULSE);
+ writel(CIO2_INT_EN_EXT_OE_MASK, base + CIO2_REG_INT_EN_EXT_OE);
+
+ writel(CIO2_REG_INT_EN_IRQ | CIO2_INT_IOC(CIO2_DMA_CHAN) |
+ CIO2_REG_INT_EN_IOS(CIO2_DMA_CHAN),
+ base + CIO2_REG_INT_EN);
+
+ writel((CIO2_PXM_PXF_FMT_CFG_BPP_10 | CIO2_PXM_PXF_FMT_CFG_PCK_64B)
+ << CIO2_PXM_PXF_FMT_CFG_SID0_SHIFT,
+ base + CIO2_REG_PXM_PXF_FMT_CFG0(csi2bus));
+ writel(SID << CIO2_MIPIBE_LP_LUT_ENTRY_SID_SHIFT |
+ sensor_vc << CIO2_MIPIBE_LP_LUT_ENTRY_VC_SHIFT |
+ fmt->mipicode << CIO2_MIPIBE_LP_LUT_ENTRY_FORMAT_TYPE_SHIFT,
+ q->csi_rx_base + CIO2_REG_MIPIBE_LP_LUT_ENTRY(ENTRY));
+ writel(0, q->csi_rx_base + CIO2_REG_MIPIBE_COMP_FORMAT(sensor_vc));
+ writel(0, q->csi_rx_base + CIO2_REG_MIPIBE_FORCE_RAW8);
+ writel(0, base + CIO2_REG_PXM_SID2BID0(csi2bus));
+
+ writel(lanes, q->csi_rx_base + CIO2_REG_CSIRX_NOF_ENABLED_LANES);
+ writel(CIO2_CGC_PRIM_TGE |
+ CIO2_CGC_SIDE_TGE |
+ CIO2_CGC_XOSC_TGE |
+ CIO2_CGC_D3I3_TGE |
+ CIO2_CGC_CSI2_INTERFRAME_TGE |
+ CIO2_CGC_CSI2_PORT_DCGE |
+ CIO2_CGC_SIDE_DCGE |
+ CIO2_CGC_PRIM_DCGE |
+ CIO2_CGC_ROSC_DCGE |
+ CIO2_CGC_XOSC_DCGE |
+ CIO2_CGC_CLKGATE_HOLDOFF << CIO2_CGC_CLKGATE_HOLDOFF_SHIFT |
+ CIO2_CGC_CSI_CLKGATE_HOLDOFF
+ << CIO2_CGC_CSI_CLKGATE_HOLDOFF_SHIFT, base + CIO2_REG_CGC);
+ writel(CIO2_LTRCTRL_LTRDYNEN, base + CIO2_REG_LTRCTRL);
+ writel(CIO2_LTRVAL0_VAL << CIO2_LTRVAL02_VAL_SHIFT |
+ CIO2_LTRVAL0_SCALE << CIO2_LTRVAL02_SCALE_SHIFT |
+ CIO2_LTRVAL1_VAL << CIO2_LTRVAL13_VAL_SHIFT |
+ CIO2_LTRVAL1_SCALE << CIO2_LTRVAL13_SCALE_SHIFT,
+ base + CIO2_REG_LTRVAL01);
+ writel(CIO2_LTRVAL2_VAL << CIO2_LTRVAL02_VAL_SHIFT |
+ CIO2_LTRVAL2_SCALE << CIO2_LTRVAL02_SCALE_SHIFT |
+ CIO2_LTRVAL3_VAL << CIO2_LTRVAL13_VAL_SHIFT |
+ CIO2_LTRVAL3_SCALE << CIO2_LTRVAL13_SCALE_SHIFT,
+ base + CIO2_REG_LTRVAL23);
+
+ for (i = 0; i < CIO2_NUM_DMA_CHAN; i++) {
+ writel(0, base + CIO2_REG_CDMABA(i));
+ writel(0, base + CIO2_REG_CDMAC0(i));
+ writel(0, base + CIO2_REG_CDMAC1(i));
+ }
+
+ /* Enable DMA */
+ writel(q->fbpt_bus_addr >> PAGE_SHIFT,
+ base + CIO2_REG_CDMABA(CIO2_DMA_CHAN));
+
+ writel(num_buffers1 << CIO2_CDMAC0_FBPT_LEN_SHIFT |
+ FBPT_WIDTH << CIO2_CDMAC0_FBPT_WIDTH_SHIFT |
+ CIO2_CDMAC0_DMA_INTR_ON_FE |
+ CIO2_CDMAC0_FBPT_UPDATE_FIFO_FULL |
+ CIO2_CDMAC0_DMA_EN |
+ CIO2_CDMAC0_DMA_INTR_ON_FS |
+ CIO2_CDMAC0_DMA_HALTED, base + CIO2_REG_CDMAC0(CIO2_DMA_CHAN));
+
+ writel(1 << CIO2_CDMAC1_LINENUMUPDATE_SHIFT,
+ base + CIO2_REG_CDMAC1(CIO2_DMA_CHAN));
+
+ writel(0, base + CIO2_REG_PBM_FOPN_ABORT);
+
+ writel(CIO2_PXM_FRF_CFG_CRC_TH << CIO2_PXM_FRF_CFG_CRC_TH_SHIFT |
+ CIO2_PXM_FRF_CFG_MSK_ECC_DPHY_NR |
+ CIO2_PXM_FRF_CFG_MSK_ECC_RE |
+ CIO2_PXM_FRF_CFG_MSK_ECC_DPHY_NE,
+ base + CIO2_REG_PXM_FRF_CFG(q->csi2.port));
+
+ /* Clear interrupts */
+ writel(CIO2_IRQCTRL_MASK, q->csi_rx_base + CIO2_REG_IRQCTRL_CLEAR);
+ writel(~0, base + CIO2_REG_INT_STS_EXT_OE);
+ writel(~0, base + CIO2_REG_INT_STS_EXT_IE);
+ writel(~0, base + CIO2_REG_INT_STS);
+
+ /* Enable devices, starting from the last device in the pipe */
+ writel(1, q->csi_rx_base + CIO2_REG_MIPIBE_ENABLE);
+ writel(1, q->csi_rx_base + CIO2_REG_CSIRX_ENABLE);
+
+ return 0;
+}
+
+static void cio2_hw_exit(struct cio2_device *cio2, struct cio2_queue *q)
+{
+ void __iomem *base = cio2->base;
+ unsigned int i, maxloops = 1000;
+
+ /* Disable CSI receiver and MIPI backend devices */
+ writel(0, q->csi_rx_base + CIO2_REG_CSIRX_ENABLE);
+ writel(0, q->csi_rx_base + CIO2_REG_MIPIBE_ENABLE);
+
+ /* Halt DMA */
+ writel(0, base + CIO2_REG_CDMAC0(CIO2_DMA_CHAN));
+ do {
+ if (readl(base + CIO2_REG_CDMAC0(CIO2_DMA_CHAN)) &
+ CIO2_CDMAC0_DMA_HALTED)
+ break;
+ usleep_range(1000, 2000);
+ } while (--maxloops);
+ if (!maxloops)
+ dev_err(&cio2->pci_dev->dev,
+ "DMA %i can not be halted\n", CIO2_DMA_CHAN);
+
+ for (i = 0; i < CIO2_NUM_PORTS; i++) {
+ writel(readl(base + CIO2_REG_PXM_FRF_CFG(i)) |
+ CIO2_PXM_FRF_CFG_ABORT, base + CIO2_REG_PXM_FRF_CFG(i));
+ writel(readl(base + CIO2_REG_PBM_FOPN_ABORT) |
+ CIO2_PBM_FOPN_ABORT(i), base + CIO2_REG_PBM_FOPN_ABORT);
+ }
+}
+
+static void cio2_buffer_done(struct cio2_device *cio2, unsigned int dma_chan)
+{
+ struct device *dev = &cio2->pci_dev->dev;
+ struct cio2_queue *q = cio2->cur_queue;
+ int buffers_found = 0;
+ u64 ns = ktime_get_ns();
+
+ if (dma_chan >= CIO2_QUEUES) {
+ dev_err(dev, "bad DMA channel %i\n", dma_chan);
+ return;
+ }
+
+ /* Find out which buffer(s) are ready */
+ do {
+ struct cio2_fbpt_entry *const entry =
+ &q->fbpt[q->bufs_first * CIO2_MAX_LOPS];
+ struct cio2_buffer *b;
+
+ if (entry->first_entry.ctrl & CIO2_FBPT_CTRL_VALID)
+ break;
+
+ b = q->bufs[q->bufs_first];
+ if (b) {
+ unsigned int bytes = entry[1].second_entry.num_of_bytes;
+
+ q->bufs[q->bufs_first] = NULL;
+ atomic_dec(&q->bufs_queued);
+ dev_dbg(&cio2->pci_dev->dev,
+ "buffer %i done\n", b->vbb.vb2_buf.index);
+
+ b->vbb.vb2_buf.timestamp = ns;
+ b->vbb.field = V4L2_FIELD_NONE;
+ b->vbb.sequence = atomic_read(&q->frame_sequence);
+ if (b->vbb.vb2_buf.planes[0].length != bytes)
+ dev_warn(dev, "buffer length is %d received %d\n",
+ b->vbb.vb2_buf.planes[0].length,
+ bytes);
+ vb2_buffer_done(&b->vbb.vb2_buf, VB2_BUF_STATE_DONE);
+ }
+ atomic_inc(&q->frame_sequence);
+ cio2_fbpt_entry_init_dummy(cio2, entry);
+ q->bufs_first = (q->bufs_first + 1) % CIO2_MAX_BUFFERS;
+ buffers_found++;
+ } while (1);
+
+ if (buffers_found == 0)
+ dev_warn(&cio2->pci_dev->dev,
+ "no ready buffers found on DMA channel %u\n",
+ dma_chan);
+}
+
+static void cio2_queue_event_sof(struct cio2_device *cio2, struct cio2_queue *q)
+{
+ /*
+ * For the user space camera control algorithms it is essential
+ * to know when the reception of a frame has begun. That's often
+ * the best timing information to get from the hardware.
+ */
+ struct v4l2_event event = {
+ .type = V4L2_EVENT_FRAME_SYNC,
+ .u.frame_sync.frame_sequence = atomic_read(&q->frame_sequence),
+ };
+
+ v4l2_event_queue(q->subdev.devnode, &event);
+}
+
+static const char *const cio2_irq_errs[] = {
+ "single packet header error corrected",
+ "multiple packet header errors detected",
+ "payload checksum (CRC) error",
+ "fifo overflow",
+ "reserved short packet data type detected",
+ "reserved long packet data type detected",
+ "incomplete long packet detected",
+ "frame sync error",
+ "line sync error",
+ "DPHY start of transmission error",
+ "DPHY synchronization error",
+ "escape mode error",
+ "escape mode trigger event",
+ "escape mode ultra-low power state for data lane(s)",
+ "escape mode ultra-low power state exit for clock lane",
+ "inter-frame short packet discarded",
+ "inter-frame long packet discarded",
+ "non-matching Long Packet stalled",
+};
+
+static const char *const cio2_port_errs[] = {
+ "ECC recoverable",
+ "DPHY not recoverable",
+ "ECC not recoverable",
+ "CRC error",
+ "INTERFRAMEDATA",
+ "PKT2SHORT",
+ "PKT2LONG",
+};
+
+static irqreturn_t cio2_irq(int irq, void *cio2_ptr)
+{
+ struct cio2_device *cio2 = cio2_ptr;
+ void __iomem *const base = cio2->base;
+ struct device *dev = &cio2->pci_dev->dev;
+ u32 int_status, int_clear;
+
+ int_status = readl(base + CIO2_REG_INT_STS);
+ int_clear = int_status;
+
+ if (!int_status)
+ return IRQ_NONE;
+
+ if (int_status & CIO2_INT_IOOE) {
+ /*
+ * Interrupt on Output Error:
+ * 1) SRAM is full and FS received, or
+ * 2) An invalid bit detected by DMA.
+ */
+ u32 oe_status, oe_clear;
+
+ oe_clear = readl(base + CIO2_REG_INT_STS_EXT_OE);
+ oe_status = oe_clear;
+
+ if (oe_status & CIO2_INT_EXT_OE_DMAOE_MASK) {
+ dev_err(dev, "DMA output error: 0x%x\n",
+ (oe_status & CIO2_INT_EXT_OE_DMAOE_MASK)
+ >> CIO2_INT_EXT_OE_DMAOE_SHIFT);
+ oe_status &= ~CIO2_INT_EXT_OE_DMAOE_MASK;
+ }
+ if (oe_status & CIO2_INT_EXT_OE_OES_MASK) {
+ dev_err(dev, "DMA output error on CSI2 buses: 0x%x\n",
+ (oe_status & CIO2_INT_EXT_OE_OES_MASK)
+ >> CIO2_INT_EXT_OE_OES_SHIFT);
+ oe_status &= ~CIO2_INT_EXT_OE_OES_MASK;
+ }
+ writel(oe_clear, base + CIO2_REG_INT_STS_EXT_OE);
+ if (oe_status)
+ dev_warn(dev, "unknown interrupt 0x%x on OE\n",
+ oe_status);
+ int_status &= ~CIO2_INT_IOOE;
+ }
+
+ if (int_status & CIO2_INT_IOC_MASK) {
+ /* DMA IO done -- frame ready */
+ u32 clr = 0;
+ unsigned int d;
+
+ for (d = 0; d < CIO2_NUM_DMA_CHAN; d++)
+ if (int_status & CIO2_INT_IOC(d)) {
+ clr |= CIO2_INT_IOC(d);
+ cio2_buffer_done(cio2, d);
+ }
+ int_status &= ~clr;
+ }
+
+ if (int_status & CIO2_INT_IOS_IOLN_MASK) {
+ /* DMA IO starts or reached specified line */
+ u32 clr = 0;
+ unsigned int d;
+
+ for (d = 0; d < CIO2_NUM_DMA_CHAN; d++)
+ if (int_status & CIO2_INT_IOS_IOLN(d)) {
+ clr |= CIO2_INT_IOS_IOLN(d);
+ if (d == CIO2_DMA_CHAN)
+ cio2_queue_event_sof(cio2,
+ cio2->cur_queue);
+ }
+ int_status &= ~clr;
+ }
+
+ if (int_status & (CIO2_INT_IOIE | CIO2_INT_IOIRQ)) {
+ /* CSI2 receiver (error) interrupt */
+ u32 ie_status, ie_clear;
+ unsigned int port;
+
+ ie_clear = readl(base + CIO2_REG_INT_STS_EXT_IE);
+ ie_status = ie_clear;
+
+ for (port = 0; port < CIO2_NUM_PORTS; port++) {
+ u32 port_status = (ie_status >> (port * 8)) & 0xff;
+ u32 err_mask = BIT_MASK(ARRAY_SIZE(cio2_port_errs)) - 1;
+ void __iomem *const csi_rx_base =
+ base + CIO2_REG_PIPE_BASE(port);
+ unsigned int i;
+
+ while (port_status & err_mask) {
+ i = ffs(port_status) - 1;
+ dev_err(dev, "port %i error %s\n",
+ port, cio2_port_errs[i]);
+ ie_status &= ~BIT(port * 8 + i);
+ port_status &= ~BIT(i);
+ }
+
+ if (ie_status & CIO2_INT_EXT_IE_IRQ(port)) {
+ u32 csi2_status, csi2_clear;
+
+ csi2_status = readl(csi_rx_base +
+ CIO2_REG_IRQCTRL_STATUS);
+ csi2_clear = csi2_status;
+ err_mask =
+ BIT_MASK(ARRAY_SIZE(cio2_irq_errs)) - 1;
+
+ while (csi2_status & err_mask) {
+ i = ffs(csi2_status) - 1;
+ dev_err(dev,
+ "CSI-2 receiver port %i: %s\n",
+ port, cio2_irq_errs[i]);
+ csi2_status &= ~BIT(i);
+ }
+
+ writel(csi2_clear,
+ csi_rx_base + CIO2_REG_IRQCTRL_CLEAR);
+ if (csi2_status)
+ dev_warn(dev,
+ "unknown CSI2 error 0x%x on port %i\n",
+ csi2_status, port);
+
+ ie_status &= ~CIO2_INT_EXT_IE_IRQ(port);
+ }
+ }
+
+ writel(ie_clear, base + CIO2_REG_INT_STS_EXT_IE);
+ if (ie_status)
+ dev_warn(dev, "unknown interrupt 0x%x on IE\n",
+ ie_status);
+
+ int_status &= ~(CIO2_INT_IOIE | CIO2_INT_IOIRQ);
+ }
+
+ writel(int_clear, base + CIO2_REG_INT_STS);
+ if (int_status)
+ dev_warn(dev, "unknown interrupt 0x%x on INT\n", int_status);
+
+ return IRQ_HANDLED;
+}
+
+/**************** Videobuf2 interface ****************/
+
+static void cio2_vb2_return_all_buffers(struct cio2_queue *q)
+{
+ unsigned int i;
+
+ for (i = 0; i < CIO2_MAX_BUFFERS; i++) {
+ if (q->bufs[i]) {
+ atomic_dec(&q->bufs_queued);
+ vb2_buffer_done(&q->bufs[i]->vbb.vb2_buf,
+ VB2_BUF_STATE_ERROR);
+ }
+ }
+}
+
+static int cio2_vb2_queue_setup(struct vb2_queue *vq,
+ unsigned int *num_buffers,
+ unsigned int *num_planes,
+ unsigned int sizes[],
+ struct device *alloc_devs[])
+{
+ struct cio2_device *cio2 = vb2_get_drv_priv(vq);
+ struct cio2_queue *q = vb2q_to_cio2_queue(vq);
+ unsigned int i;
+
+ *num_planes = q->format.num_planes;
+
+ for (i = 0; i < *num_planes; ++i) {
+ sizes[i] = q->format.plane_fmt[i].sizeimage;
+ alloc_devs[i] = &cio2->pci_dev->dev;
+ }
+
+ *num_buffers = clamp_val(*num_buffers, 1, CIO2_MAX_BUFFERS);
+
+ /* Initialize buffer queue */
+ for (i = 0; i < CIO2_MAX_BUFFERS; i++) {
+ q->bufs[i] = NULL;
+ cio2_fbpt_entry_init_dummy(cio2, &q->fbpt[i * CIO2_MAX_LOPS]);
+ }
+ atomic_set(&q->bufs_queued, 0);
+ q->bufs_first = 0;
+ q->bufs_next = 0;
+
+ return 0;
+}
+
+/* Called after each buffer is allocated */
+static int cio2_vb2_buf_init(struct vb2_buffer *vb)
+{
+ struct cio2_device *cio2 = vb2_get_drv_priv(vb->vb2_queue);
+ struct device *dev = &cio2->pci_dev->dev;
+ struct cio2_buffer *b =
+ container_of(vb, struct cio2_buffer, vbb.vb2_buf);
+ static const unsigned int entries_per_page =
+ CIO2_PAGE_SIZE / sizeof(u32);
+ unsigned int pages = DIV_ROUND_UP(vb->planes[0].length, CIO2_PAGE_SIZE);
+ unsigned int lops = DIV_ROUND_UP(pages + 1, entries_per_page);
+ struct sg_table *sg;
+ struct sg_page_iter sg_iter;
+ unsigned int i, j;
+
+ if (lops <= 0 || lops > CIO2_MAX_LOPS) {
+ dev_err(dev, "%s: bad buffer size (%i)\n", __func__,
+ vb->planes[0].length);
+ return -ENOSPC; /* Should never happen */
+ }
+
+ memset(b->lop, 0, sizeof(*b->lop));
+ /* Allocate LOP table */
+ for (i = 0; i < lops; i++) {
+ b->lop[i] = dma_alloc_coherent(dev, CIO2_PAGE_SIZE,
+ &b->lop_bus_addr[i], GFP_KERNEL);
+ if (!b->lop[i])
+ goto fail;
+ }
+
+ /* Fill LOP */
+ sg = vb2_dma_sg_plane_desc(vb, 0);
+ if (!sg)
+ return -ENOMEM;
+
+ if (sg->nents && sg->sgl)
+ b->offset = sg->sgl->offset;
+
+ i = j = 0;
+ for_each_sg_page(sg->sgl, &sg_iter, sg->nents, 0) {
+ b->lop[i][j] = sg_page_iter_dma_address(&sg_iter) >> PAGE_SHIFT;
+ j++;
+ if (j == entries_per_page) {
+ i++;
+ j = 0;
+ }
+ }
+
+ b->lop[i][j] = cio2->dummy_page_bus_addr >> PAGE_SHIFT;
+ return 0;
+fail:
+ for (; i >= 0; i--)
+ dma_free_coherent(dev, CIO2_PAGE_SIZE,
+ b->lop[i], b->lop_bus_addr[i]);
+ return -ENOMEM;
+}
+
+/* Transfer buffer ownership to cio2 */
+static void cio2_vb2_buf_queue(struct vb2_buffer *vb)
+{
+ struct cio2_device *cio2 = vb2_get_drv_priv(vb->vb2_queue);
+ struct cio2_queue *q =
+ container_of(vb->vb2_queue, struct cio2_queue, vbq);
+ struct cio2_buffer *b =
+ container_of(vb, struct cio2_buffer, vbb.vb2_buf);
+ struct cio2_fbpt_entry *entry;
+ unsigned long flags;
+ unsigned int i, j, next = q->bufs_next;
+ int bufs_queued = atomic_inc_return(&q->bufs_queued);
+ u32 fbpt_rp;
+
+ dev_dbg(&cio2->pci_dev->dev, "queue buffer %d\n", vb->index);
+
+ /*
+ * This code queues the buffer to the CIO2 DMA engine, which starts
+ * running once streaming has started. It is possible that this code
+ * gets pre-empted due to increased CPU load. Upon this, the driver
+ * does not get an opportunity to queue new buffers to the CIO2 DMA
+ * engine. When the DMA engine encounters an FBPT entry without the
+ * VALID bit set, the DMA engine halts, which requires a restart of
+ * the DMA engine and sensor, to continue streaming.
+ * This is not desired and is highly unlikely given that there are
+ * 32 FBPT entries that the DMA engine needs to process, to run into
+ * an FBPT entry, without the VALID bit set. We try to mitigate this
+ * by disabling interrupts for the duration of this queueing.
+ */
+ local_irq_save(flags);
+
+ fbpt_rp = (readl(cio2->base + CIO2_REG_CDMARI(CIO2_DMA_CHAN))
+ >> CIO2_CDMARI_FBPT_RP_SHIFT)
+ & CIO2_CDMARI_FBPT_RP_MASK;
+
+ /*
+ * fbpt_rp is the fbpt entry that the dma is currently working
+ * on, but since it could jump to next entry at any time,
+ * assume that we might already be there.
+ */
+ fbpt_rp = (fbpt_rp + 1) % CIO2_MAX_BUFFERS;
+
+ if (bufs_queued <= 1 || fbpt_rp == next)
+ /* Buffers were drained */
+ next = (fbpt_rp + 1) % CIO2_MAX_BUFFERS;
+
+ for (i = 0; i < CIO2_MAX_BUFFERS; i++) {
+ /*
+ * We have allocated CIO2_MAX_BUFFERS circularly for the
+ * hw, the user has requested N buffer queue. The driver
+ * ensures N <= CIO2_MAX_BUFFERS and guarantees that whenever
+ * user queues a buffer, there necessarily is a free buffer.
+ */
+ if (!q->bufs[next]) {
+ q->bufs[next] = b;
+ entry = &q->fbpt[next * CIO2_MAX_LOPS];
+ cio2_fbpt_entry_init_buf(cio2, b, entry);
+ local_irq_restore(flags);
+ q->bufs_next = (next + 1) % CIO2_MAX_BUFFERS;
+ for (j = 0; j < vb->num_planes; j++)
+ vb2_set_plane_payload(vb, j,
+ q->format.plane_fmt[j].sizeimage);
+ return;
+ }
+
+ dev_dbg(&cio2->pci_dev->dev, "entry %i was full!\n", next);
+ next = (next + 1) % CIO2_MAX_BUFFERS;
+ }
+
+ local_irq_restore(flags);
+ dev_err(&cio2->pci_dev->dev, "error: all cio2 entries were full!\n");
+ atomic_dec(&q->bufs_queued);
+ vb2_buffer_done(vb, VB2_BUF_STATE_ERROR);
+}
+
+/* Called when each buffer is freed */
+static void cio2_vb2_buf_cleanup(struct vb2_buffer *vb)
+{
+ struct cio2_device *cio2 = vb2_get_drv_priv(vb->vb2_queue);
+ struct cio2_buffer *b =
+ container_of(vb, struct cio2_buffer, vbb.vb2_buf);
+ unsigned int i;
+
+ /* Free LOP table */
+ for (i = 0; i < CIO2_MAX_LOPS; i++) {
+ if (b->lop[i])
+ dma_free_coherent(&cio2->pci_dev->dev, CIO2_PAGE_SIZE,
+ b->lop[i], b->lop_bus_addr[i]);
+ }
+}
+
+static int cio2_vb2_start_streaming(struct vb2_queue *vq, unsigned int count)
+{
+ struct cio2_queue *q = vb2q_to_cio2_queue(vq);
+ struct cio2_device *cio2 = vb2_get_drv_priv(vq);
+ int r;
+
+ cio2->cur_queue = q;
+ atomic_set(&q->frame_sequence, 0);
+
+ r = pm_runtime_get_sync(&cio2->pci_dev->dev);
+ if (r < 0) {
+ dev_info(&cio2->pci_dev->dev, "failed to set power %d\n", r);
+ pm_runtime_put(&cio2->pci_dev->dev);
+ return r;
+ }
+
+ r = media_pipeline_start(&q->vdev.entity, &q->pipe);
+ if (r)
+ goto fail_pipeline;
+
+ r = cio2_hw_init(cio2, q);
+ if (r)
+ goto fail_hw;
+
+ /* Start streaming on sensor */
+ r = v4l2_subdev_call(q->sensor, video, s_stream, 1);
+ if (r)
+ goto fail_csi2_subdev;
+
+ cio2->streaming = true;
+
+ return 0;
+
+fail_csi2_subdev:
+ cio2_hw_exit(cio2, q);
+fail_hw:
+ media_pipeline_stop(&q->vdev.entity);
+fail_pipeline:
+ dev_dbg(&cio2->pci_dev->dev, "failed to start streaming (%d)\n", r);
+ cio2_vb2_return_all_buffers(q);
+
+ return r;
+}
+
+static void cio2_vb2_stop_streaming(struct vb2_queue *vq)
+{
+ struct cio2_queue *q = vb2q_to_cio2_queue(vq);
+ struct cio2_device *cio2 = vb2_get_drv_priv(vq);
+
+ if (v4l2_subdev_call(q->sensor, video, s_stream, 0))
+ dev_err(&cio2->pci_dev->dev,
+ "failed to stop sensor streaming\n");
+
+ cio2_hw_exit(cio2, q);
+ cio2_vb2_return_all_buffers(q);
+ media_pipeline_stop(&q->vdev.entity);
+ pm_runtime_put(&cio2->pci_dev->dev);
+ cio2->streaming = false;
+}
+
+static const struct vb2_ops cio2_vb2_ops = {
+ .buf_init = cio2_vb2_buf_init,
+ .buf_queue = cio2_vb2_buf_queue,
+ .buf_cleanup = cio2_vb2_buf_cleanup,
+ .queue_setup = cio2_vb2_queue_setup,
+ .start_streaming = cio2_vb2_start_streaming,
+ .stop_streaming = cio2_vb2_stop_streaming,
+ .wait_prepare = vb2_ops_wait_prepare,
+ .wait_finish = vb2_ops_wait_finish,
+};
+
+/**************** V4L2 interface ****************/
+
+static int cio2_v4l2_querycap(struct file *file, void *fh,
+ struct v4l2_capability *cap)
+{
+ struct cio2_device *cio2 = video_drvdata(file);
+
+ strlcpy(cap->driver, CIO2_NAME, sizeof(cap->driver));
+ strlcpy(cap->card, CIO2_DEVICE_NAME, sizeof(cap->card));
+ snprintf(cap->bus_info, sizeof(cap->bus_info),
+ "PCI:%s", pci_name(cio2->pci_dev));
+
+ return 0;
+}
+
+static int cio2_v4l2_enum_fmt(struct file *file, void *fh,
+ struct v4l2_fmtdesc *f)
+{
+ if (f->index >= ARRAY_SIZE(formats))
+ return -EINVAL;
+
+ f->pixelformat = formats[f->index].fourcc;
+
+ return 0;
+}
+
+/* The format is validated in cio2_video_link_validate() */
+static int cio2_v4l2_g_fmt(struct file *file, void *fh, struct v4l2_format *f)
+{
+ struct cio2_queue *q = file_to_cio2_queue(file);
+
+ f->fmt.pix_mp = q->format;
+
+ return 0;
+}
+
+static int cio2_v4l2_try_fmt(struct file *file, void *fh, struct v4l2_format *f)
+{
+ const struct ipu3_cio2_fmt *fmt;
+ struct v4l2_pix_format_mplane *mpix = &f->fmt.pix_mp;
+
+ fmt = cio2_find_format(&mpix->pixelformat, NULL);
+ if (!fmt)
+ fmt = &formats[0];
+
+ /* Only supports up to 4224x3136 */
+ if (mpix->width > CIO2_IMAGE_MAX_WIDTH)
+ mpix->width = CIO2_IMAGE_MAX_WIDTH;
+ if (mpix->height > CIO2_IMAGE_MAX_LENGTH)
+ mpix->height = CIO2_IMAGE_MAX_LENGTH;
+
+ mpix->num_planes = 1;
+ mpix->pixelformat = fmt->fourcc;
+ mpix->colorspace = V4L2_COLORSPACE_RAW;
+ mpix->field = V4L2_FIELD_NONE;
+ memset(mpix->reserved, 0, sizeof(mpix->reserved));
+ mpix->plane_fmt[0].bytesperline = cio2_bytesperline(mpix->width);
+ mpix->plane_fmt[0].sizeimage = mpix->plane_fmt[0].bytesperline *
+ mpix->height;
+ memset(mpix->plane_fmt[0].reserved, 0,
+ sizeof(mpix->plane_fmt[0].reserved));
+
+ /* use default */
+ mpix->ycbcr_enc = V4L2_YCBCR_ENC_DEFAULT;
+ mpix->quantization = V4L2_QUANTIZATION_DEFAULT;
+ mpix->xfer_func = V4L2_XFER_FUNC_DEFAULT;
+
+ return 0;
+}
+
+static int cio2_v4l2_s_fmt(struct file *file, void *fh, struct v4l2_format *f)
+{
+ struct cio2_queue *q = file_to_cio2_queue(file);
+
+ cio2_v4l2_try_fmt(file, fh, f);
+ q->format = f->fmt.pix_mp;
+
+ return 0;
+}
+
+static int
+cio2_video_enum_input(struct file *file, void *fh, struct v4l2_input *input)
+{
+ if (input->index > 0)
+ return -EINVAL;
+
+ strlcpy(input->name, "camera", sizeof(input->name));
+ input->type = V4L2_INPUT_TYPE_CAMERA;
+
+ return 0;
+}
+
+static int
+cio2_video_g_input(struct file *file, void *fh, unsigned int *input)
+{
+ *input = 0;
+
+ return 0;
+}
+
+static int
+cio2_video_s_input(struct file *file, void *fh, unsigned int input)
+{
+ return input == 0 ? 0 : -EINVAL;
+}
+
+static const struct v4l2_file_operations cio2_v4l2_fops = {
+ .owner = THIS_MODULE,
+ .unlocked_ioctl = video_ioctl2,
+ .open = v4l2_fh_open,
+ .release = vb2_fop_release,
+ .poll = vb2_fop_poll,
+ .mmap = vb2_fop_mmap,
+};
+
+static const struct v4l2_ioctl_ops cio2_v4l2_ioctl_ops = {
+ .vidioc_querycap = cio2_v4l2_querycap,
+ .vidioc_enum_fmt_vid_cap_mplane = cio2_v4l2_enum_fmt,
+ .vidioc_g_fmt_vid_cap_mplane = cio2_v4l2_g_fmt,
+ .vidioc_s_fmt_vid_cap_mplane = cio2_v4l2_s_fmt,
+ .vidioc_try_fmt_vid_cap_mplane = cio2_v4l2_try_fmt,
+ .vidioc_reqbufs = vb2_ioctl_reqbufs,
+ .vidioc_create_bufs = vb2_ioctl_create_bufs,
+ .vidioc_prepare_buf = vb2_ioctl_prepare_buf,
+ .vidioc_querybuf = vb2_ioctl_querybuf,
+ .vidioc_qbuf = vb2_ioctl_qbuf,
+ .vidioc_dqbuf = vb2_ioctl_dqbuf,
+ .vidioc_streamon = vb2_ioctl_streamon,
+ .vidioc_streamoff = vb2_ioctl_streamoff,
+ .vidioc_expbuf = vb2_ioctl_expbuf,
+ .vidioc_enum_input = cio2_video_enum_input,
+ .vidioc_g_input = cio2_video_g_input,
+ .vidioc_s_input = cio2_video_s_input,
+};
+
+static int cio2_subdev_subscribe_event(struct v4l2_subdev *sd,
+ struct v4l2_fh *fh,
+ struct v4l2_event_subscription *sub)
+{
+ if (sub->type != V4L2_EVENT_FRAME_SYNC)
+ return -EINVAL;
+
+ /* Line number. For now only zero accepted. */
+ if (sub->id != 0)
+ return -EINVAL;
+
+ return v4l2_event_subscribe(fh, sub, 0, NULL);
+}
+
+static int cio2_subdev_open(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh)
+{
+ struct v4l2_mbus_framefmt *format;
+ const struct v4l2_mbus_framefmt fmt_default = {
+ .width = 1936,
+ .height = 1096,
+ .code = formats[0].mbus_code,
+ .field = V4L2_FIELD_NONE,
+ .colorspace = V4L2_COLORSPACE_RAW,
+ .ycbcr_enc = V4L2_YCBCR_ENC_DEFAULT,
+ .quantization = V4L2_QUANTIZATION_DEFAULT,
+ .xfer_func = V4L2_XFER_FUNC_DEFAULT,
+ };
+
+ /* Initialize try_fmt */
+ format = v4l2_subdev_get_try_format(sd, fh->pad, CIO2_PAD_SINK);
+ *format = fmt_default;
+
+ /* same as sink */
+ format = v4l2_subdev_get_try_format(sd, fh->pad, CIO2_PAD_SOURCE);
+ *format = fmt_default;
+
+ return 0;
+}
+
+/*
+ * cio2_subdev_get_fmt - Handle get format by pads subdev method
+ * @sd : pointer to v4l2 subdev structure
+ * @cfg: V4L2 subdev pad config
+ * @fmt: pointer to v4l2 subdev format structure
+ * return -EINVAL or zero on success
+ */
+static int cio2_subdev_get_fmt(struct v4l2_subdev *sd,
+ struct v4l2_subdev_pad_config *cfg,
+ struct v4l2_subdev_format *fmt)
+{
+ struct cio2_queue *q = container_of(sd, struct cio2_queue, subdev);
+ struct v4l2_subdev_format format;
+ int ret;
+
+ if (fmt->which == V4L2_SUBDEV_FORMAT_TRY) {
+ fmt->format = *v4l2_subdev_get_try_format(sd, cfg, fmt->pad);
+ return 0;
+ }
+
+ if (fmt->pad == CIO2_PAD_SINK) {
+ format.which = V4L2_SUBDEV_FORMAT_ACTIVE;
+ ret = v4l2_subdev_call(sd, pad, get_fmt, NULL,
+ &format);
+
+ if (ret)
+ return ret;
+ /* update colorspace etc */
+ q->subdev_fmt.colorspace = format.format.colorspace;
+ q->subdev_fmt.ycbcr_enc = format.format.ycbcr_enc;
+ q->subdev_fmt.quantization = format.format.quantization;
+ q->subdev_fmt.xfer_func = format.format.xfer_func;
+ }
+
+ fmt->format = q->subdev_fmt;
+
+ return 0;
+}
+
+/*
+ * cio2_subdev_set_fmt - Handle set format by pads subdev method
+ * @sd : pointer to v4l2 subdev structure
+ * @cfg: V4L2 subdev pad config
+ * @fmt: pointer to v4l2 subdev format structure
+ * return -EINVAL or zero on success
+ */
+static int cio2_subdev_set_fmt(struct v4l2_subdev *sd,
+ struct v4l2_subdev_pad_config *cfg,
+ struct v4l2_subdev_format *fmt)
+{
+ struct cio2_queue *q = container_of(sd, struct cio2_queue, subdev);
+
+ /*
+ * Only allow setting sink pad format;
+ * source always propagates from sink
+ */
+ if (fmt->pad == CIO2_PAD_SOURCE)
+ return cio2_subdev_get_fmt(sd, cfg, fmt);
+
+ if (fmt->which == V4L2_SUBDEV_FORMAT_TRY) {
+ *v4l2_subdev_get_try_format(sd, cfg, fmt->pad) = fmt->format;
+ } else {
+ /* It's the sink, allow changing frame size */
+ q->subdev_fmt.width = fmt->format.width;
+ q->subdev_fmt.height = fmt->format.height;
+ q->subdev_fmt.code = fmt->format.code;
+ fmt->format = q->subdev_fmt;
+ }
+
+ return 0;
+}
+
+static int cio2_subdev_enum_mbus_code(struct v4l2_subdev *sd,
+ struct v4l2_subdev_pad_config *cfg,
+ struct v4l2_subdev_mbus_code_enum *code)
+{
+ if (code->index >= ARRAY_SIZE(formats))
+ return -EINVAL;
+
+ code->code = formats[code->index].mbus_code;
+ return 0;
+}
+
+static int cio2_subdev_link_validate_get_format(struct media_pad *pad,
+ struct v4l2_subdev_format *fmt)
+{
+ if (is_media_entity_v4l2_subdev(pad->entity)) {
+ struct v4l2_subdev *sd =
+ media_entity_to_v4l2_subdev(pad->entity);
+
+ fmt->which = V4L2_SUBDEV_FORMAT_ACTIVE;
+ fmt->pad = pad->index;
+ return v4l2_subdev_call(sd, pad, get_fmt, NULL, fmt);
+ }
+
+ return -EINVAL;
+}
+
+static int cio2_video_link_validate(struct media_link *link)
+{
+ struct video_device *vd = container_of(link->sink->entity,
+ struct video_device, entity);
+ struct cio2_queue *q = container_of(vd, struct cio2_queue, vdev);
+ struct cio2_device *cio2 = video_get_drvdata(vd);
+ struct v4l2_subdev_format source_fmt;
+ int ret;
+
+ if (!media_entity_remote_pad(link->sink->entity->pads)) {
+ dev_info(&cio2->pci_dev->dev,
+ "video node %s pad not connected\n", vd->name);
+ return -ENOTCONN;
+ }
+
+ ret = cio2_subdev_link_validate_get_format(link->source, &source_fmt);
+ if (ret < 0)
+ return 0;
+
+ if (source_fmt.format.width != q->format.width ||
+ source_fmt.format.height != q->format.height) {
+ dev_err(&cio2->pci_dev->dev,
+ "Wrong width or height %ux%u (%ux%u expected)\n",
+ q->format.width, q->format.height,
+ source_fmt.format.width, source_fmt.format.height);
+ return -EINVAL;
+ }
+
+ if (!cio2_find_format(&q->format.pixelformat, &source_fmt.format.code))
+ return -EINVAL;
+
+ return 0;
+}
+
+static const struct v4l2_subdev_core_ops cio2_subdev_core_ops = {
+ .subscribe_event = cio2_subdev_subscribe_event,
+ .unsubscribe_event = v4l2_event_subdev_unsubscribe,
+};
+
+static const struct v4l2_subdev_internal_ops cio2_subdev_internal_ops = {
+ .open = cio2_subdev_open,
+};
+
+static const struct v4l2_subdev_pad_ops cio2_subdev_pad_ops = {
+ .link_validate = v4l2_subdev_link_validate_default,
+ .get_fmt = cio2_subdev_get_fmt,
+ .set_fmt = cio2_subdev_set_fmt,
+ .enum_mbus_code = cio2_subdev_enum_mbus_code,
+};
+
+static const struct v4l2_subdev_ops cio2_subdev_ops = {
+ .core = &cio2_subdev_core_ops,
+ .pad = &cio2_subdev_pad_ops,
+};
+
+/******* V4L2 sub-device asynchronous registration callbacks***********/
+
+struct sensor_async_subdev {
+ struct v4l2_async_subdev asd;
+ struct csi2_bus_info csi2;
+};
+
+/* The .bound() notifier callback when a match is found */
+static int cio2_notifier_bound(struct v4l2_async_notifier *notifier,
+ struct v4l2_subdev *sd,
+ struct v4l2_async_subdev *asd)
+{
+ struct cio2_device *cio2 = container_of(notifier,
+ struct cio2_device, notifier);
+ struct sensor_async_subdev *s_asd = container_of(asd,
+ struct sensor_async_subdev, asd);
+ struct cio2_queue *q;
+
+ if (cio2->queue[s_asd->csi2.port].sensor)
+ return -EBUSY;
+
+ q = &cio2->queue[s_asd->csi2.port];
+
+ q->csi2 = s_asd->csi2;
+ q->sensor = sd;
+ q->csi_rx_base = cio2->base + CIO2_REG_PIPE_BASE(q->csi2.port);
+
+ return 0;
+}
+
+/* The .unbind callback */
+static void cio2_notifier_unbind(struct v4l2_async_notifier *notifier,
+ struct v4l2_subdev *sd,
+ struct v4l2_async_subdev *asd)
+{
+ struct cio2_device *cio2 = container_of(notifier,
+ struct cio2_device, notifier);
+ struct sensor_async_subdev *s_asd = container_of(asd,
+ struct sensor_async_subdev, asd);
+
+ cio2->queue[s_asd->csi2.port].sensor = NULL;
+}
+
+/* .complete() is called after all subdevices have been located */
+static int cio2_notifier_complete(struct v4l2_async_notifier *notifier)
+{
+ struct cio2_device *cio2 = container_of(notifier, struct cio2_device,
+ notifier);
+ struct sensor_async_subdev *s_asd;
+ struct cio2_queue *q;
+ unsigned int i, pad;
+ int ret;
+
+ for (i = 0; i < notifier->num_subdevs; i++) {
+ s_asd = container_of(cio2->notifier.subdevs[i],
+ struct sensor_async_subdev, asd);
+ q = &cio2->queue[s_asd->csi2.port];
+
+ for (pad = 0; pad < q->sensor->entity.num_pads; pad++)
+ if (q->sensor->entity.pads[pad].flags &
+ MEDIA_PAD_FL_SOURCE)
+ break;
+
+ if (pad == q->sensor->entity.num_pads) {
+ dev_err(&cio2->pci_dev->dev,
+ "failed to find src pad for %s\n",
+ q->sensor->name);
+ return -ENXIO;
+ }
+
+ ret = media_create_pad_link(
+ &q->sensor->entity, pad,
+ &q->subdev.entity, CIO2_PAD_SINK,
+ 0);
+ if (ret) {
+ dev_err(&cio2->pci_dev->dev,
+ "failed to create link for %s\n",
+ cio2->queue[i].sensor->name);
+ return ret;
+ }
+ }
+
+ return v4l2_device_register_subdev_nodes(&cio2->v4l2_dev);
+}
+
+static const struct v4l2_async_notifier_operations cio2_async_ops = {
+ .bound = cio2_notifier_bound,
+ .unbind = cio2_notifier_unbind,
+ .complete = cio2_notifier_complete,
+};
+
+static int cio2_fwnode_parse(struct device *dev,
+ struct v4l2_fwnode_endpoint *vep,
+ struct v4l2_async_subdev *asd)
+{
+ struct sensor_async_subdev *s_asd =
+ container_of(asd, struct sensor_async_subdev, asd);
+
+ if (vep->bus_type != V4L2_MBUS_CSI2) {
+ dev_err(dev, "Only CSI2 bus type is currently supported\n");
+ return -EINVAL;
+ }
+
+ s_asd->csi2.port = vep->base.port;
+ s_asd->csi2.lanes = vep->bus.mipi_csi2.num_data_lanes;
+
+ return 0;
+}
+
+static int cio2_notifier_init(struct cio2_device *cio2)
+{
+ int ret;
+
+ ret = v4l2_async_notifier_parse_fwnode_endpoints(
+ &cio2->pci_dev->dev, &cio2->notifier,
+ sizeof(struct sensor_async_subdev),
+ cio2_fwnode_parse);
+ if (ret < 0)
+ return ret;
+
+ if (!cio2->notifier.num_subdevs)
+ return -ENODEV; /* no endpoint */
+
+ cio2->notifier.ops = &cio2_async_ops;
+ ret = v4l2_async_notifier_register(&cio2->v4l2_dev, &cio2->notifier);
+ if (ret) {
+ dev_err(&cio2->pci_dev->dev,
+ "failed to register async notifier : %d\n", ret);
+ v4l2_async_notifier_cleanup(&cio2->notifier);
+ }
+
+ return ret;
+}
+
+static void cio2_notifier_exit(struct cio2_device *cio2)
+{
+ v4l2_async_notifier_unregister(&cio2->notifier);
+ v4l2_async_notifier_cleanup(&cio2->notifier);
+}
+
+/**************** Queue initialization ****************/
+static const struct media_entity_operations cio2_media_ops = {
+ .link_validate = v4l2_subdev_link_validate,
+};
+
+static const struct media_entity_operations cio2_video_entity_ops = {
+ .link_validate = cio2_video_link_validate,
+};
+
+static int cio2_queue_init(struct cio2_device *cio2, struct cio2_queue *q)
+{
+ static const u32 default_width = 1936;
+ static const u32 default_height = 1096;
+ const struct ipu3_cio2_fmt dflt_fmt = formats[0];
+
+ struct video_device *vdev = &q->vdev;
+ struct vb2_queue *vbq = &q->vbq;
+ struct v4l2_subdev *subdev = &q->subdev;
+ struct v4l2_mbus_framefmt *fmt;
+ int r;
+
+ /* Initialize miscellaneous variables */
+ mutex_init(&q->lock);
+
+ /* Initialize formats to default values */
+ fmt = &q->subdev_fmt;
+ fmt->width = default_width;
+ fmt->height = default_height;
+ fmt->code = dflt_fmt.mbus_code;
+ fmt->field = V4L2_FIELD_NONE;
+
+ q->format.width = default_width;
+ q->format.height = default_height;
+ q->format.pixelformat = dflt_fmt.fourcc;
+ q->format.colorspace = V4L2_COLORSPACE_RAW;
+ q->format.field = V4L2_FIELD_NONE;
+ q->format.num_planes = 1;
+ q->format.plane_fmt[0].bytesperline =
+ cio2_bytesperline(q->format.width);
+ q->format.plane_fmt[0].sizeimage = q->format.plane_fmt[0].bytesperline *
+ q->format.height;
+
+ /* Initialize fbpt */
+ r = cio2_fbpt_init(cio2, q);
+ if (r)
+ goto fail_fbpt;
+
+ /* Initialize media entities */
+ q->subdev_pads[CIO2_PAD_SINK].flags = MEDIA_PAD_FL_SINK |
+ MEDIA_PAD_FL_MUST_CONNECT;
+ q->subdev_pads[CIO2_PAD_SOURCE].flags = MEDIA_PAD_FL_SOURCE;
+ subdev->entity.ops = &cio2_media_ops;
+ subdev->internal_ops = &cio2_subdev_internal_ops;
+ r = media_entity_pads_init(&subdev->entity, CIO2_PADS, q->subdev_pads);
+ if (r) {
+ dev_err(&cio2->pci_dev->dev,
+ "failed initialize subdev media entity (%d)\n", r);
+ goto fail_subdev_media_entity;
+ }
+
+ q->vdev_pad.flags = MEDIA_PAD_FL_SINK | MEDIA_PAD_FL_MUST_CONNECT;
+ vdev->entity.ops = &cio2_video_entity_ops;
+ r = media_entity_pads_init(&vdev->entity, 1, &q->vdev_pad);
+ if (r) {
+ dev_err(&cio2->pci_dev->dev,
+ "failed initialize videodev media entity (%d)\n", r);
+ goto fail_vdev_media_entity;
+ }
+
+ /* Initialize subdev */
+ v4l2_subdev_init(subdev, &cio2_subdev_ops);
+ subdev->flags = V4L2_SUBDEV_FL_HAS_DEVNODE | V4L2_SUBDEV_FL_HAS_EVENTS;
+ subdev->owner = THIS_MODULE;
+ snprintf(subdev->name, sizeof(subdev->name),
+ CIO2_ENTITY_NAME ":%td", q - cio2->queue);
+ v4l2_set_subdevdata(subdev, cio2);
+ r = v4l2_device_register_subdev(&cio2->v4l2_dev, subdev);
+ if (r) {
+ dev_err(&cio2->pci_dev->dev,
+ "failed initialize subdev (%d)\n", r);
+ goto fail_subdev;
+ }
+
+ /* Initialize vbq */
+ vbq->type = V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE;
+ vbq->io_modes = VB2_USERPTR | VB2_MMAP | VB2_DMABUF;
+ vbq->ops = &cio2_vb2_ops;
+ vbq->mem_ops = &vb2_dma_sg_memops;
+ vbq->buf_struct_size = sizeof(struct cio2_buffer);
+ vbq->timestamp_flags = V4L2_BUF_FLAG_TIMESTAMP_MONOTONIC;
+ vbq->min_buffers_needed = 1;
+ vbq->drv_priv = cio2;
+ vbq->lock = &q->lock;
+ r = vb2_queue_init(vbq);
+ if (r) {
+ dev_err(&cio2->pci_dev->dev,
+ "failed to initialize videobuf2 queue (%d)\n", r);
+ goto fail_vbq;
+ }
+
+ /* Initialize vdev */
+ snprintf(vdev->name, sizeof(vdev->name),
+ "%s:%td", CIO2_NAME, q - cio2->queue);
+ vdev->release = video_device_release_empty;
+ vdev->fops = &cio2_v4l2_fops;
+ vdev->ioctl_ops = &cio2_v4l2_ioctl_ops;
+ vdev->lock = &cio2->lock;
+ vdev->v4l2_dev = &cio2->v4l2_dev;
+ vdev->queue = &q->vbq;
+ vdev->device_caps = V4L2_CAP_VIDEO_CAPTURE_MPLANE | V4L2_CAP_STREAMING;
+ video_set_drvdata(vdev, cio2);
+ r = video_register_device(vdev, VFL_TYPE_GRABBER, -1);
+ if (r) {
+ dev_err(&cio2->pci_dev->dev,
+ "failed to register video device (%d)\n", r);
+ goto fail_vdev;
+ }
+
+ /* Create link from CIO2 subdev to output node */
+ r = media_create_pad_link(
+ &subdev->entity, CIO2_PAD_SOURCE, &vdev->entity, 0,
+ MEDIA_LNK_FL_ENABLED | MEDIA_LNK_FL_IMMUTABLE);
+ if (r)
+ goto fail_link;
+
+ return 0;
+
+fail_link:
+ video_unregister_device(&q->vdev);
+fail_vdev:
+ vb2_queue_release(vbq);
+fail_vbq:
+ v4l2_device_unregister_subdev(subdev);
+fail_subdev:
+ media_entity_cleanup(&vdev->entity);
+fail_vdev_media_entity:
+ media_entity_cleanup(&subdev->entity);
+fail_subdev_media_entity:
+ cio2_fbpt_exit(q, &cio2->pci_dev->dev);
+fail_fbpt:
+ mutex_destroy(&q->lock);
+
+ return r;
+}
+
+static void cio2_queue_exit(struct cio2_device *cio2, struct cio2_queue *q)
+{
+ video_unregister_device(&q->vdev);
+ media_entity_cleanup(&q->vdev.entity);
+ vb2_queue_release(&q->vbq);
+ v4l2_device_unregister_subdev(&q->subdev);
+ media_entity_cleanup(&q->subdev.entity);
+ cio2_fbpt_exit(q, &cio2->pci_dev->dev);
+ mutex_destroy(&q->lock);
+}
+
+static int cio2_queues_init(struct cio2_device *cio2)
+{
+ int i, r;
+
+ for (i = 0; i < CIO2_QUEUES; i++) {
+ r = cio2_queue_init(cio2, &cio2->queue[i]);
+ if (r)
+ break;
+ }
+
+ if (i == CIO2_QUEUES)
+ return 0;
+
+ for (i--; i >= 0; i--)
+ cio2_queue_exit(cio2, &cio2->queue[i]);
+
+ return r;
+}
+
+static void cio2_queues_exit(struct cio2_device *cio2)
+{
+ unsigned int i;
+
+ for (i = 0; i < CIO2_QUEUES; i++)
+ cio2_queue_exit(cio2, &cio2->queue[i]);
+}
+
+/**************** PCI interface ****************/
+
+static int cio2_pci_config_setup(struct pci_dev *dev)
+{
+ u16 pci_command;
+ int r = pci_enable_msi(dev);
+
+ if (r) {
+ dev_err(&dev->dev, "failed to enable MSI (%d)\n", r);
+ return r;
+ }
+
+ pci_read_config_word(dev, PCI_COMMAND, &pci_command);
+ pci_command |= PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER |
+ PCI_COMMAND_INTX_DISABLE;
+ pci_write_config_word(dev, PCI_COMMAND, pci_command);
+
+ return 0;
+}
+
+static int cio2_pci_probe(struct pci_dev *pci_dev,
+ const struct pci_device_id *id)
+{
+ struct cio2_device *cio2;
+ phys_addr_t phys;
+ void __iomem *const *iomap;
+ int r;
+
+ cio2 = devm_kzalloc(&pci_dev->dev, sizeof(*cio2), GFP_KERNEL);
+ if (!cio2)
+ return -ENOMEM;
+ cio2->pci_dev = pci_dev;
+
+ r = pcim_enable_device(pci_dev);
+ if (r) {
+ dev_err(&pci_dev->dev, "failed to enable device (%d)\n", r);
+ return r;
+ }
+
+ dev_info(&pci_dev->dev, "device 0x%x (rev: 0x%x)\n",
+ pci_dev->device, pci_dev->revision);
+
+ phys = pci_resource_start(pci_dev, CIO2_PCI_BAR);
+
+ r = pcim_iomap_regions(pci_dev, 1 << CIO2_PCI_BAR, pci_name(pci_dev));
+ if (r) {
+ dev_err(&pci_dev->dev, "failed to remap I/O memory (%d)\n", r);
+ return -ENODEV;
+ }
+
+ iomap = pcim_iomap_table(pci_dev);
+ if (!iomap) {
+ dev_err(&pci_dev->dev, "failed to iomap table\n");
+ return -ENODEV;
+ }
+
+ cio2->base = iomap[CIO2_PCI_BAR];
+
+ pci_set_drvdata(pci_dev, cio2);
+
+ pci_set_master(pci_dev);
+
+ r = pci_set_dma_mask(pci_dev, CIO2_DMA_MASK);
+ if (r) {
+ dev_err(&pci_dev->dev, "failed to set DMA mask (%d)\n", r);
+ return -ENODEV;
+ }
+
+ r = cio2_pci_config_setup(pci_dev);
+ if (r)
+ return -ENODEV;
+
+ r = cio2_fbpt_init_dummy(cio2);
+ if (r)
+ return r;
+
+ mutex_init(&cio2->lock);
+
+ cio2->media_dev.dev = &cio2->pci_dev->dev;
+ strlcpy(cio2->media_dev.model, CIO2_DEVICE_NAME,
+ sizeof(cio2->media_dev.model));
+ snprintf(cio2->media_dev.bus_info, sizeof(cio2->media_dev.bus_info),
+ "PCI:%s", pci_name(cio2->pci_dev));
+ cio2->media_dev.hw_revision = 0;
+
+ media_device_init(&cio2->media_dev);
+ r = media_device_register(&cio2->media_dev);
+ if (r < 0)
+ goto fail_mutex_destroy;
+
+ cio2->v4l2_dev.mdev = &cio2->media_dev;
+ r = v4l2_device_register(&pci_dev->dev, &cio2->v4l2_dev);
+ if (r) {
+ dev_err(&pci_dev->dev,
+ "failed to register V4L2 device (%d)\n", r);
+ goto fail_media_device_unregister;
+ }
+
+ r = cio2_queues_init(cio2);
+ if (r)
+ goto fail_v4l2_device_unregister;
+
+ /* Register notifier for subdevices we care */
+ r = cio2_notifier_init(cio2);
+ if (r)
+ goto fail_cio2_queue_exit;
+
+ r = devm_request_irq(&pci_dev->dev, pci_dev->irq, cio2_irq,
+ IRQF_SHARED, CIO2_NAME, cio2);
+ if (r) {
+ dev_err(&pci_dev->dev, "failed to request IRQ (%d)\n", r);
+ goto fail;
+ }
+
+ pm_runtime_put_noidle(&pci_dev->dev);
+ pm_runtime_allow(&pci_dev->dev);
+
+ return 0;
+
+fail:
+ cio2_notifier_exit(cio2);
+fail_cio2_queue_exit:
+ cio2_queues_exit(cio2);
+fail_v4l2_device_unregister:
+ v4l2_device_unregister(&cio2->v4l2_dev);
+fail_media_device_unregister:
+ media_device_unregister(&cio2->media_dev);
+ media_device_cleanup(&cio2->media_dev);
+fail_mutex_destroy:
+ mutex_destroy(&cio2->lock);
+ cio2_fbpt_exit_dummy(cio2);
+
+ return r;
+}
+
+static void cio2_pci_remove(struct pci_dev *pci_dev)
+{
+ struct cio2_device *cio2 = pci_get_drvdata(pci_dev);
+ unsigned int i;
+
+ cio2_notifier_exit(cio2);
+ cio2_fbpt_exit_dummy(cio2);
+ for (i = 0; i < CIO2_QUEUES; i++)
+ cio2_queue_exit(cio2, &cio2->queue[i]);
+ v4l2_device_unregister(&cio2->v4l2_dev);
+ media_device_unregister(&cio2->media_dev);
+ media_device_cleanup(&cio2->media_dev);
+ mutex_destroy(&cio2->lock);
+}
+
+static int cio2_runtime_suspend(struct device *dev)
+{
+ struct pci_dev *pci_dev = to_pci_dev(dev);
+ struct cio2_device *cio2 = pci_get_drvdata(pci_dev);
+ void __iomem *const base = cio2->base;
+ u16 pm;
+
+ writel(CIO2_D0I3C_I3, base + CIO2_REG_D0I3C);
+ dev_dbg(dev, "cio2 runtime suspend.\n");
+
+ pci_read_config_word(pci_dev, pci_dev->pm_cap + CIO2_PMCSR_OFFSET, &pm);
+ pm = (pm >> CIO2_PMCSR_D0D3_SHIFT) << CIO2_PMCSR_D0D3_SHIFT;
+ pm |= CIO2_PMCSR_D3;
+ pci_write_config_word(pci_dev, pci_dev->pm_cap + CIO2_PMCSR_OFFSET, pm);
+
+ return 0;
+}
+
+static int cio2_runtime_resume(struct device *dev)
+{
+ struct pci_dev *pci_dev = to_pci_dev(dev);
+ struct cio2_device *cio2 = pci_get_drvdata(pci_dev);
+ void __iomem *const base = cio2->base;
+ u16 pm;
+
+ writel(CIO2_D0I3C_RR, base + CIO2_REG_D0I3C);
+ dev_dbg(dev, "cio2 runtime resume.\n");
+
+ pci_read_config_word(pci_dev, pci_dev->pm_cap + CIO2_PMCSR_OFFSET, &pm);
+ pm = (pm >> CIO2_PMCSR_D0D3_SHIFT) << CIO2_PMCSR_D0D3_SHIFT;
+ pci_write_config_word(pci_dev, pci_dev->pm_cap + CIO2_PMCSR_OFFSET, pm);
+
+ return 0;
+}
+
+static int cio2_suspend(struct device *dev)
+{
+ struct pci_dev *pci_dev = to_pci_dev(dev);
+ struct cio2_device *cio2 = pci_get_drvdata(pci_dev);
+ struct cio2_queue *q = cio2->cur_queue;
+
+ dev_dbg(dev, "cio2 suspend\n");
+ if (!cio2->streaming)
+ return 0;
+
+ /* Stop stream */
+ cio2_hw_exit(cio2, q);
+
+ pm_runtime_force_suspend(dev);
+
+ /*
+ * Upon resume, hw starts to process the fbpt entries from beginning,
+ * so relocate the queued buffs to the fbpt head before suspend.
+ */
+ cio2_fbpt_rearrange(cio2, q);
+ q->bufs_first = 0;
+ q->bufs_next = 0;
+
+ return 0;
+}
+
+static int cio2_resume(struct device *dev)
+{
+ struct pci_dev *pci_dev = to_pci_dev(dev);
+ struct cio2_device *cio2 = pci_get_drvdata(pci_dev);
+ int r = 0;
+ struct cio2_queue *q = cio2->cur_queue;
+
+ dev_dbg(dev, "cio2 resume\n");
+ if (!cio2->streaming)
+ return 0;
+ /* Start stream */
+ r = pm_runtime_force_resume(&cio2->pci_dev->dev);
+ if (r < 0) {
+ dev_err(&cio2->pci_dev->dev,
+ "failed to set power %d\n", r);
+ return r;
+ }
+
+ r = cio2_hw_init(cio2, q);
+ if (r)
+ dev_err(dev, "fail to init cio2 hw\n");
+
+ return r;
+}
+
+static const struct dev_pm_ops cio2_pm_ops = {
+ SET_RUNTIME_PM_OPS(&cio2_runtime_suspend, &cio2_runtime_resume, NULL)
+ SET_SYSTEM_SLEEP_PM_OPS(&cio2_suspend, &cio2_resume)
+};
+
+static const struct pci_device_id cio2_pci_id_table[] = {
+ { PCI_DEVICE(PCI_VENDOR_ID_INTEL, CIO2_PCI_ID) },
+ { 0 }
+};
+
+MODULE_DEVICE_TABLE(pci, cio2_pci_id_table);
+
+static struct pci_driver cio2_pci_driver = {
+ .name = CIO2_NAME,
+ .id_table = cio2_pci_id_table,
+ .probe = cio2_pci_probe,
+ .remove = cio2_pci_remove,
+ .driver = {
+ .pm = &cio2_pm_ops,
+ },
+};
+
+module_pci_driver(cio2_pci_driver);
+
+MODULE_AUTHOR("Tuukka Toivonen <tuukka.toivonen@intel.com>");
+MODULE_AUTHOR("Tianshu Qiu <tian.shu.qiu@intel.com>");
+MODULE_AUTHOR("Jian Xu Zheng <jian.xu.zheng@intel.com>");
+MODULE_AUTHOR("Yuning Pu <yuning.pu@intel.com>");
+MODULE_AUTHOR("Yong Zhi <yong.zhi@intel.com>");
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("IPU3 CIO2 driver");
diff --git a/drivers/media/pci/intel/ipu3/ipu3-cio2.h b/drivers/media/pci/intel/ipu3/ipu3-cio2.h
new file mode 100644
index 000000000000..1a559990920f
--- /dev/null
+++ b/drivers/media/pci/intel/ipu3/ipu3-cio2.h
@@ -0,0 +1,449 @@
+/*
+ * Copyright (c) 2017 Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version
+ * 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __IPU3_CIO2_H
+#define __IPU3_CIO2_H
+
+#define CIO2_NAME "ipu3-cio2"
+#define CIO2_DEVICE_NAME "Intel IPU3 CIO2"
+#define CIO2_ENTITY_NAME "ipu3-csi2"
+#define CIO2_PCI_ID 0x9d32
+#define CIO2_PCI_BAR 0
+#define CIO2_DMA_MASK DMA_BIT_MASK(39)
+#define CIO2_IMAGE_MAX_WIDTH 4224
+#define CIO2_IMAGE_MAX_LENGTH 3136
+
+#define CIO2_IMAGE_MAX_WIDTH 4224
+#define CIO2_IMAGE_MAX_LENGTH 3136
+
+/* 32MB = 8xFBPT_entry */
+#define CIO2_MAX_LOPS 8
+#define CIO2_MAX_BUFFERS (PAGE_SIZE / 16 / CIO2_MAX_LOPS)
+
+#define CIO2_PAD_SINK 0
+#define CIO2_PAD_SOURCE 1
+#define CIO2_PADS 2
+
+#define CIO2_NUM_DMA_CHAN 20
+#define CIO2_NUM_PORTS 4 /* DPHYs */
+
+/* 1 for each sensor */
+#define CIO2_QUEUES CIO2_NUM_PORTS
+
+/* Register and bit field definitions */
+#define CIO2_REG_PIPE_BASE(n) ((n) * 0x0400) /* n = 0..3 */
+#define CIO2_REG_CSIRX_BASE 0x000
+#define CIO2_REG_MIPIBE_BASE 0x100
+#define CIO2_REG_PIXELGEN_BAS 0x200
+#define CIO2_REG_IRQCTRL_BASE 0x300
+#define CIO2_REG_GPREG_BASE 0x1000
+
+/* base register: CIO2_REG_PIPE_BASE(pipe) * CIO2_REG_CSIRX_BASE */
+#define CIO2_REG_CSIRX_ENABLE (CIO2_REG_CSIRX_BASE + 0x0)
+#define CIO2_REG_CSIRX_NOF_ENABLED_LANES (CIO2_REG_CSIRX_BASE + 0x4)
+#define CIO2_REG_CSIRX_SP_IF_CONFIG (CIO2_REG_CSIRX_BASE + 0x10)
+#define CIO2_REG_CSIRX_LP_IF_CONFIG (CIO2_REG_CSIRX_BASE + 0x14)
+#define CIO2_CSIRX_IF_CONFIG_FILTEROUT 0x00
+#define CIO2_CSIRX_IF_CONFIG_FILTEROUT_VC_INACTIVE 0x01
+#define CIO2_CSIRX_IF_CONFIG_PASS 0x02
+#define CIO2_CSIRX_IF_CONFIG_FLAG_ERROR BIT(2)
+#define CIO2_REG_CSIRX_STATUS (CIO2_REG_CSIRX_BASE + 0x18)
+#define CIO2_REG_CSIRX_STATUS_DLANE_HS (CIO2_REG_CSIRX_BASE + 0x1c)
+#define CIO2_CSIRX_STATUS_DLANE_HS_MASK 0xff
+#define CIO2_REG_CSIRX_STATUS_DLANE_LP (CIO2_REG_CSIRX_BASE + 0x20)
+#define CIO2_CSIRX_STATUS_DLANE_LP_MASK 0xffffff
+/* Termination enable and settle in 0.0625ns units, lane=0..3 or -1 for clock */
+#define CIO2_REG_CSIRX_DLY_CNT_TERMEN(lane) \
+ (CIO2_REG_CSIRX_BASE + 0x2c + 8 * (lane))
+#define CIO2_REG_CSIRX_DLY_CNT_SETTLE(lane) \
+ (CIO2_REG_CSIRX_BASE + 0x30 + 8 * (lane))
+/* base register: CIO2_REG_PIPE_BASE(pipe) * CIO2_REG_MIPIBE_BASE */
+#define CIO2_REG_MIPIBE_ENABLE (CIO2_REG_MIPIBE_BASE + 0x0)
+#define CIO2_REG_MIPIBE_STATUS (CIO2_REG_MIPIBE_BASE + 0x4)
+#define CIO2_REG_MIPIBE_COMP_FORMAT(vc) \
+ (CIO2_REG_MIPIBE_BASE + 0x8 + 0x4 * (vc))
+#define CIO2_REG_MIPIBE_FORCE_RAW8 (CIO2_REG_MIPIBE_BASE + 0x20)
+#define CIO2_REG_MIPIBE_FORCE_RAW8_ENABLE BIT(0)
+#define CIO2_REG_MIPIBE_FORCE_RAW8_USE_TYPEID BIT(1)
+#define CIO2_REG_MIPIBE_FORCE_RAW8_TYPEID_SHIFT 2
+
+#define CIO2_REG_MIPIBE_IRQ_STATUS (CIO2_REG_MIPIBE_BASE + 0x24)
+#define CIO2_REG_MIPIBE_IRQ_CLEAR (CIO2_REG_MIPIBE_BASE + 0x28)
+#define CIO2_REG_MIPIBE_GLOBAL_LUT_DISREGARD (CIO2_REG_MIPIBE_BASE + 0x68)
+#define CIO2_MIPIBE_GLOBAL_LUT_DISREGARD 1
+#define CIO2_REG_MIPIBE_PKT_STALL_STATUS (CIO2_REG_MIPIBE_BASE + 0x6c)
+#define CIO2_REG_MIPIBE_PARSE_GSP_THROUGH_LP_LUT_REG_IDX \
+ (CIO2_REG_MIPIBE_BASE + 0x70)
+#define CIO2_REG_MIPIBE_SP_LUT_ENTRY(vc) \
+ (CIO2_REG_MIPIBE_BASE + 0x74 + 4 * (vc))
+#define CIO2_REG_MIPIBE_LP_LUT_ENTRY(m) /* m = 0..15 */ \
+ (CIO2_REG_MIPIBE_BASE + 0x84 + 4 * (m))
+#define CIO2_MIPIBE_LP_LUT_ENTRY_DISREGARD 1
+#define CIO2_MIPIBE_LP_LUT_ENTRY_SID_SHIFT 1
+#define CIO2_MIPIBE_LP_LUT_ENTRY_VC_SHIFT 5
+#define CIO2_MIPIBE_LP_LUT_ENTRY_FORMAT_TYPE_SHIFT 7
+
+/* base register: CIO2_REG_PIPE_BASE(pipe) * CIO2_REG_IRQCTRL_BASE */
+/* IRQ registers are 18-bit wide, see cio2_irq_error for bit definitions */
+#define CIO2_REG_IRQCTRL_EDGE (CIO2_REG_IRQCTRL_BASE + 0x00)
+#define CIO2_REG_IRQCTRL_MASK (CIO2_REG_IRQCTRL_BASE + 0x04)
+#define CIO2_REG_IRQCTRL_STATUS (CIO2_REG_IRQCTRL_BASE + 0x08)
+#define CIO2_REG_IRQCTRL_CLEAR (CIO2_REG_IRQCTRL_BASE + 0x0c)
+#define CIO2_REG_IRQCTRL_ENABLE (CIO2_REG_IRQCTRL_BASE + 0x10)
+#define CIO2_REG_IRQCTRL_LEVEL_NOT_PULSE (CIO2_REG_IRQCTRL_BASE + 0x14)
+
+#define CIO2_REG_GPREG_SRST (CIO2_REG_GPREG_BASE + 0x0)
+#define CIO2_GPREG_SRST_ALL 0xffff /* Reset all */
+#define CIO2_REG_FB_HPLL_FREQ (CIO2_REG_GPREG_BASE + 0x08)
+#define CIO2_REG_ISCLK_RATIO (CIO2_REG_GPREG_BASE + 0xc)
+
+#define CIO2_REG_CGC 0x1400
+#define CIO2_CGC_CSI2_TGE BIT(0)
+#define CIO2_CGC_PRIM_TGE BIT(1)
+#define CIO2_CGC_SIDE_TGE BIT(2)
+#define CIO2_CGC_XOSC_TGE BIT(3)
+#define CIO2_CGC_MPLL_SHUTDOWN_EN BIT(4)
+#define CIO2_CGC_D3I3_TGE BIT(5)
+#define CIO2_CGC_CSI2_INTERFRAME_TGE BIT(6)
+#define CIO2_CGC_CSI2_PORT_DCGE BIT(8)
+#define CIO2_CGC_CSI2_DCGE BIT(9)
+#define CIO2_CGC_SIDE_DCGE BIT(10)
+#define CIO2_CGC_PRIM_DCGE BIT(11)
+#define CIO2_CGC_ROSC_DCGE BIT(12)
+#define CIO2_CGC_XOSC_DCGE BIT(13)
+#define CIO2_CGC_FLIS_DCGE BIT(14)
+#define CIO2_CGC_CLKGATE_HOLDOFF_SHIFT 20
+#define CIO2_CGC_CSI_CLKGATE_HOLDOFF_SHIFT 24
+#define CIO2_REG_D0I3C 0x1408
+#define CIO2_D0I3C_I3 BIT(2) /* Set D0I3 */
+#define CIO2_D0I3C_RR BIT(3) /* Restore? */
+#define CIO2_REG_SWRESET 0x140c
+#define CIO2_SWRESET_SWRESET 1
+#define CIO2_REG_SENSOR_ACTIVE 0x1410
+#define CIO2_REG_INT_STS 0x1414
+#define CIO2_REG_INT_STS_EXT_OE 0x1418
+#define CIO2_INT_EXT_OE_DMAOE_SHIFT 0
+#define CIO2_INT_EXT_OE_DMAOE_MASK 0x7ffff
+#define CIO2_INT_EXT_OE_OES_SHIFT 24
+#define CIO2_INT_EXT_OE_OES_MASK (0xf << CIO2_INT_EXT_OE_OES_SHIFT)
+#define CIO2_REG_INT_EN 0x1420
+#define CIO2_REG_INT_EN_IRQ (1 << 24)
+#define CIO2_REG_INT_EN_IOS(dma) (1 << (((dma) >> 1) + 12))
+/*
+ * Interrupt on completion bit, Eg. DMA 0-3 maps to bit 0-3,
+ * DMA4 & DMA5 map to bit 4 ... DMA18 & DMA19 map to bit 11 Et cetera
+ */
+#define CIO2_INT_IOC(dma) (1 << ((dma) < 4 ? (dma) : ((dma) >> 1) + 2))
+#define CIO2_INT_IOC_SHIFT 0
+#define CIO2_INT_IOC_MASK (0x7ff << CIO2_INT_IOC_SHIFT)
+#define CIO2_INT_IOS_IOLN(dma) (1 << (((dma) >> 1) + 12))
+#define CIO2_INT_IOS_IOLN_SHIFT 12
+#define CIO2_INT_IOS_IOLN_MASK (0x3ff << CIO2_INT_IOS_IOLN_SHIFT)
+#define CIO2_INT_IOIE BIT(22)
+#define CIO2_INT_IOOE BIT(23)
+#define CIO2_INT_IOIRQ BIT(24)
+#define CIO2_REG_INT_EN_EXT_OE 0x1424
+#define CIO2_REG_DMA_DBG 0x1448
+#define CIO2_REG_DMA_DBG_DMA_INDEX_SHIFT 0
+#define CIO2_REG_PBM_ARB_CTRL 0x1460
+#define CIO2_PBM_ARB_CTRL_LANES_DIV 0 /* 4-4-2-2 lanes */
+#define CIO2_PBM_ARB_CTRL_LANES_DIV_SHIFT 0
+#define CIO2_PBM_ARB_CTRL_LE_EN BIT(7)
+#define CIO2_PBM_ARB_CTRL_PLL_POST_SHTDN 2
+#define CIO2_PBM_ARB_CTRL_PLL_POST_SHTDN_SHIFT 8
+#define CIO2_PBM_ARB_CTRL_PLL_AHD_WK_UP 480
+#define CIO2_PBM_ARB_CTRL_PLL_AHD_WK_UP_SHIFT 16
+#define CIO2_REG_PBM_WMCTRL1 0x1464
+#define CIO2_PBM_WMCTRL1_MIN_2CK_SHIFT 0
+#define CIO2_PBM_WMCTRL1_MID1_2CK_SHIFT 8
+#define CIO2_PBM_WMCTRL1_MID2_2CK_SHIFT 16
+#define CIO2_PBM_WMCTRL1_TS_COUNT_DISABLE BIT(31)
+#define CIO2_PBM_WMCTRL1_MIN_2CK (4 << CIO2_PBM_WMCTRL1_MIN_2CK_SHIFT)
+#define CIO2_PBM_WMCTRL1_MID1_2CK (16 << CIO2_PBM_WMCTRL1_MID1_2CK_SHIFT)
+#define CIO2_PBM_WMCTRL1_MID2_2CK (21 << CIO2_PBM_WMCTRL1_MID2_2CK_SHIFT)
+#define CIO2_REG_PBM_WMCTRL2 0x1468
+#define CIO2_PBM_WMCTRL2_HWM_2CK 40
+#define CIO2_PBM_WMCTRL2_HWM_2CK_SHIFT 0
+#define CIO2_PBM_WMCTRL2_LWM_2CK 22
+#define CIO2_PBM_WMCTRL2_LWM_2CK_SHIFT 8
+#define CIO2_PBM_WMCTRL2_OBFFWM_2CK 2
+#define CIO2_PBM_WMCTRL2_OBFFWM_2CK_SHIFT 16
+#define CIO2_PBM_WMCTRL2_TRANSDYN 1
+#define CIO2_PBM_WMCTRL2_TRANSDYN_SHIFT 24
+#define CIO2_PBM_WMCTRL2_DYNWMEN BIT(28)
+#define CIO2_PBM_WMCTRL2_OBFF_MEM_EN BIT(29)
+#define CIO2_PBM_WMCTRL2_OBFF_CPU_EN BIT(30)
+#define CIO2_PBM_WMCTRL2_DRAINNOW BIT(31)
+#define CIO2_REG_PBM_TS_COUNT 0x146c
+#define CIO2_REG_PBM_FOPN_ABORT 0x1474
+/* below n = 0..3 */
+#define CIO2_PBM_FOPN_ABORT(n) (0x1 << 8 * (n))
+#define CIO2_PBM_FOPN_FORCE_ABORT(n) (0x2 << 8 * (n))
+#define CIO2_PBM_FOPN_FRAMEOPEN(n) (0x8 << 8 * (n))
+#define CIO2_REG_LTRCTRL 0x1480
+#define CIO2_LTRCTRL_LTRDYNEN BIT(16)
+#define CIO2_LTRCTRL_LTRSTABLETIME_SHIFT 8
+#define CIO2_LTRCTRL_LTRSTABLETIME_MASK 0xff
+#define CIO2_LTRCTRL_LTRSEL1S3 BIT(7)
+#define CIO2_LTRCTRL_LTRSEL1S2 BIT(6)
+#define CIO2_LTRCTRL_LTRSEL1S1 BIT(5)
+#define CIO2_LTRCTRL_LTRSEL1S0 BIT(4)
+#define CIO2_LTRCTRL_LTRSEL2S3 BIT(3)
+#define CIO2_LTRCTRL_LTRSEL2S2 BIT(2)
+#define CIO2_LTRCTRL_LTRSEL2S1 BIT(1)
+#define CIO2_LTRCTRL_LTRSEL2S0 BIT(0)
+#define CIO2_REG_LTRVAL23 0x1484
+#define CIO2_REG_LTRVAL01 0x1488
+#define CIO2_LTRVAL02_VAL_SHIFT 0
+#define CIO2_LTRVAL02_SCALE_SHIFT 10
+#define CIO2_LTRVAL13_VAL_SHIFT 16
+#define CIO2_LTRVAL13_SCALE_SHIFT 26
+
+#define CIO2_LTRVAL0_VAL 175
+/* Value times 1024 ns */
+#define CIO2_LTRVAL0_SCALE 2
+#define CIO2_LTRVAL1_VAL 90
+#define CIO2_LTRVAL1_SCALE 2
+#define CIO2_LTRVAL2_VAL 90
+#define CIO2_LTRVAL2_SCALE 2
+#define CIO2_LTRVAL3_VAL 90
+#define CIO2_LTRVAL3_SCALE 2
+
+#define CIO2_REG_CDMABA(n) (0x1500 + 0x10 * (n)) /* n = 0..19 */
+#define CIO2_REG_CDMARI(n) (0x1504 + 0x10 * (n))
+#define CIO2_CDMARI_FBPT_RP_SHIFT 0
+#define CIO2_CDMARI_FBPT_RP_MASK 0xff
+#define CIO2_REG_CDMAC0(n) (0x1508 + 0x10 * (n))
+#define CIO2_CDMAC0_FBPT_LEN_SHIFT 0
+#define CIO2_CDMAC0_FBPT_WIDTH_SHIFT 8
+#define CIO2_CDMAC0_FBPT_NS BIT(25)
+#define CIO2_CDMAC0_DMA_INTR_ON_FS BIT(26)
+#define CIO2_CDMAC0_DMA_INTR_ON_FE BIT(27)
+#define CIO2_CDMAC0_FBPT_UPDATE_FIFO_FULL BIT(28)
+#define CIO2_CDMAC0_FBPT_FIFO_FULL_FIX_DIS BIT(29)
+#define CIO2_CDMAC0_DMA_EN BIT(30)
+#define CIO2_CDMAC0_DMA_HALTED BIT(31)
+#define CIO2_REG_CDMAC1(n) (0x150c + 0x10 * (n))
+#define CIO2_CDMAC1_LINENUMINT_SHIFT 0
+#define CIO2_CDMAC1_LINENUMUPDATE_SHIFT 16
+/* n = 0..3 */
+#define CIO2_REG_PXM_PXF_FMT_CFG0(n) (0x1700 + 0x30 * (n))
+#define CIO2_PXM_PXF_FMT_CFG_SID0_SHIFT 0
+#define CIO2_PXM_PXF_FMT_CFG_SID1_SHIFT 16
+#define CIO2_PXM_PXF_FMT_CFG_PCK_64B (0 << 0)
+#define CIO2_PXM_PXF_FMT_CFG_PCK_32B (1 << 0)
+#define CIO2_PXM_PXF_FMT_CFG_BPP_08 (0 << 2)
+#define CIO2_PXM_PXF_FMT_CFG_BPP_10 (1 << 2)
+#define CIO2_PXM_PXF_FMT_CFG_BPP_12 (2 << 2)
+#define CIO2_PXM_PXF_FMT_CFG_BPP_14 (3 << 2)
+#define CIO2_PXM_PXF_FMT_CFG_SPEC_4PPC (0 << 4)
+#define CIO2_PXM_PXF_FMT_CFG_SPEC_3PPC_RGBA (1 << 4)
+#define CIO2_PXM_PXF_FMT_CFG_SPEC_3PPC_ARGB (2 << 4)
+#define CIO2_PXM_PXF_FMT_CFG_SPEC_PLANAR2 (3 << 4)
+#define CIO2_PXM_PXF_FMT_CFG_SPEC_PLANAR3 (4 << 4)
+#define CIO2_PXM_PXF_FMT_CFG_SPEC_NV16 (5 << 4)
+#define CIO2_PXM_PXF_FMT_CFG_PSWAP4_1ST_AB (1 << 7)
+#define CIO2_PXM_PXF_FMT_CFG_PSWAP4_1ST_CD (1 << 8)
+#define CIO2_PXM_PXF_FMT_CFG_PSWAP4_2ND_AC (1 << 9)
+#define CIO2_PXM_PXF_FMT_CFG_PSWAP4_2ND_BD (1 << 10)
+#define CIO2_REG_INT_STS_EXT_IE 0x17e4
+#define CIO2_REG_INT_EN_EXT_IE 0x17e8
+#define CIO2_INT_EXT_IE_ECC_RE(n) (0x01 << (8 * (n)))
+#define CIO2_INT_EXT_IE_DPHY_NR(n) (0x02 << (8 * (n)))
+#define CIO2_INT_EXT_IE_ECC_NR(n) (0x04 << (8 * (n)))
+#define CIO2_INT_EXT_IE_CRCERR(n) (0x08 << (8 * (n)))
+#define CIO2_INT_EXT_IE_INTERFRAMEDATA(n) (0x10 << (8 * (n)))
+#define CIO2_INT_EXT_IE_PKT2SHORT(n) (0x20 << (8 * (n)))
+#define CIO2_INT_EXT_IE_PKT2LONG(n) (0x40 << (8 * (n)))
+#define CIO2_INT_EXT_IE_IRQ(n) (0x80 << (8 * (n)))
+#define CIO2_REG_PXM_FRF_CFG(n) (0x1720 + 0x30 * (n))
+#define CIO2_PXM_FRF_CFG_FNSEL BIT(0)
+#define CIO2_PXM_FRF_CFG_FN_RST BIT(1)
+#define CIO2_PXM_FRF_CFG_ABORT BIT(2)
+#define CIO2_PXM_FRF_CFG_CRC_TH_SHIFT 3
+#define CIO2_PXM_FRF_CFG_MSK_ECC_DPHY_NR BIT(8)
+#define CIO2_PXM_FRF_CFG_MSK_ECC_RE BIT(9)
+#define CIO2_PXM_FRF_CFG_MSK_ECC_DPHY_NE BIT(10)
+#define CIO2_PXM_FRF_CFG_EVEN_ODD_MODE_SHIFT 11
+#define CIO2_PXM_FRF_CFG_MASK_CRC_THRES BIT(13)
+#define CIO2_PXM_FRF_CFG_MASK_CSI_ACCEPT BIT(14)
+#define CIO2_PXM_FRF_CFG_CIOHC_FS_MODE BIT(15)
+#define CIO2_PXM_FRF_CFG_CIOHC_FRST_FRM_SHIFT 16
+#define CIO2_REG_PXM_SID2BID0(n) (0x1724 + 0x30 * (n))
+#define CIO2_FB_HPLL_FREQ 0x2
+#define CIO2_ISCLK_RATIO 0xc
+
+#define CIO2_IRQCTRL_MASK 0x3ffff
+
+#define CIO2_INT_EN_EXT_OE_MASK 0x8f0fffff
+
+#define CIO2_CGC_CLKGATE_HOLDOFF 3
+#define CIO2_CGC_CSI_CLKGATE_HOLDOFF 5
+
+#define CIO2_PXM_FRF_CFG_CRC_TH 16
+
+#define CIO2_INT_EN_EXT_IE_MASK 0xffffffff
+
+#define CIO2_DMA_CHAN 0
+
+#define CIO2_CSIRX_DLY_CNT_CLANE_IDX -1
+
+#define CIO2_CSIRX_DLY_CNT_TERMEN_CLANE_A 0
+#define CIO2_CSIRX_DLY_CNT_TERMEN_CLANE_B 0
+#define CIO2_CSIRX_DLY_CNT_SETTLE_CLANE_A 95
+#define CIO2_CSIRX_DLY_CNT_SETTLE_CLANE_B -8
+
+#define CIO2_CSIRX_DLY_CNT_TERMEN_DLANE_A 0
+#define CIO2_CSIRX_DLY_CNT_TERMEN_DLANE_B 0
+#define CIO2_CSIRX_DLY_CNT_SETTLE_DLANE_A 85
+#define CIO2_CSIRX_DLY_CNT_SETTLE_DLANE_B -2
+
+#define CIO2_CSIRX_DLY_CNT_TERMEN_DEFAULT 0x4
+#define CIO2_CSIRX_DLY_CNT_SETTLE_DEFAULT 0x570
+
+#define CIO2_PMCSR_OFFSET 4
+#define CIO2_PMCSR_D0D3_SHIFT 2
+#define CIO2_PMCSR_D3 0x3
+
+struct cio2_csi2_timing {
+ s32 clk_termen;
+ s32 clk_settle;
+ s32 dat_termen;
+ s32 dat_settle;
+};
+
+struct cio2_buffer {
+ struct vb2_v4l2_buffer vbb;
+ u32 *lop[CIO2_MAX_LOPS];
+ dma_addr_t lop_bus_addr[CIO2_MAX_LOPS];
+ unsigned int offset;
+};
+
+struct csi2_bus_info {
+ u32 port;
+ u32 lanes;
+};
+
+struct cio2_queue {
+ /* mutex to be used by vb2_queue */
+ struct mutex lock;
+ struct media_pipeline pipe;
+ struct csi2_bus_info csi2;
+ struct v4l2_subdev *sensor;
+ void __iomem *csi_rx_base;
+
+ /* Subdev, /dev/v4l-subdevX */
+ struct v4l2_subdev subdev;
+ struct media_pad subdev_pads[CIO2_PADS];
+ struct v4l2_mbus_framefmt subdev_fmt;
+ atomic_t frame_sequence;
+
+ /* Video device, /dev/videoX */
+ struct video_device vdev;
+ struct media_pad vdev_pad;
+ struct v4l2_pix_format_mplane format;
+ struct vb2_queue vbq;
+
+ /* Buffer queue handling */
+ struct cio2_fbpt_entry *fbpt; /* Frame buffer pointer table */
+ dma_addr_t fbpt_bus_addr;
+ struct cio2_buffer *bufs[CIO2_MAX_BUFFERS];
+ unsigned int bufs_first; /* Index of the first used entry */
+ unsigned int bufs_next; /* Index of the first unused entry */
+ atomic_t bufs_queued;
+};
+
+struct cio2_device {
+ struct pci_dev *pci_dev;
+ void __iomem *base;
+ struct v4l2_device v4l2_dev;
+ struct cio2_queue queue[CIO2_QUEUES];
+ struct cio2_queue *cur_queue;
+ /* mutex to be used by video_device */
+ struct mutex lock;
+
+ bool streaming;
+ struct v4l2_async_notifier notifier;
+ struct media_device media_dev;
+
+ /*
+ * Safety net to catch DMA fetch ahead
+ * when reaching the end of LOP
+ */
+ void *dummy_page;
+ /* DMA handle of dummy_page */
+ dma_addr_t dummy_page_bus_addr;
+ /* single List of Pointers (LOP) page */
+ u32 *dummy_lop;
+ /* DMA handle of dummy_lop */
+ dma_addr_t dummy_lop_bus_addr;
+};
+
+/**************** Virtual channel ****************/
+/*
+ * This should come from sensor driver. No
+ * driver interface nor requirement yet.
+ */
+#define SENSOR_VIR_CH_DFLT 0
+
+/**************** FBPT operations ****************/
+#define CIO2_FBPT_SIZE (CIO2_MAX_BUFFERS * CIO2_MAX_LOPS * \
+ sizeof(struct cio2_fbpt_entry))
+
+#define CIO2_FBPT_SUBENTRY_UNIT 4
+#define CIO2_PAGE_SIZE PAGE_SIZE
+
+/* cio2 fbpt first_entry ctrl status */
+#define CIO2_FBPT_CTRL_VALID BIT(0)
+#define CIO2_FBPT_CTRL_IOC BIT(1)
+#define CIO2_FBPT_CTRL_IOS BIT(2)
+#define CIO2_FBPT_CTRL_SUCCXFAIL BIT(3)
+#define CIO2_FBPT_CTRL_CMPLCODE_SHIFT 4
+
+/*
+ * Frame Buffer Pointer Table(FBPT) entry
+ * each entry describe an output buffer and consists of
+ * several sub-entries
+ */
+struct __packed cio2_fbpt_entry {
+ union {
+ struct __packed {
+ u32 ctrl; /* status ctrl */
+ u16 cur_line_num; /* current line # written to DDR */
+ u16 frame_num; /* updated by DMA upon FE */
+ u32 first_page_offset; /* offset for 1st page in LOP */
+ } first_entry;
+ /* Second entry per buffer */
+ struct __packed {
+ u32 timestamp;
+ u32 num_of_bytes;
+ /* the number of bytes for write on last page */
+ u16 last_page_available_bytes;
+ /* the number of pages allocated for this buf */
+ u16 num_of_pages;
+ } second_entry;
+ };
+ u32 lop_page_addr; /* Points to list of pointers (LOP) table */
+};
+
+static inline struct cio2_queue *file_to_cio2_queue(struct file *file)
+{
+ return container_of(video_devdata(file), struct cio2_queue, vdev);
+}
+
+static inline struct cio2_queue *vb2q_to_cio2_queue(struct vb2_queue *vq)
+{
+ return container_of(vq, struct cio2_queue, vbq);
+}
+
+#endif
--
2.7.4
^ permalink raw reply related [flat|nested] 8+ messages in thread