[PATCH] examples/ipsec-secgw: fix usage of incorrect port

* [PATCH] examples/ipsec-secgw: fix usage of incorrect port
@ 2017-11-13 16:13 Anoob Joseph
  2017-11-13 17:23 ` Radu Nicolau
  2017-11-14 15:37 ` [PATCH v2] " Anoob Joseph
  0 siblings, 2 replies; 21+ messages in thread
From: Anoob Joseph @ 2017-11-13 16:13 UTC (permalink / raw)
  To: Akhil Goyal, Declan Doherty, Sergio Gonzalez Monroy, Radu Nicolau
  Cc: narayanaprasad.athreya, jerin.jacobkollanukkaran, anoob.joseph, dev

When security offload is enabled, the packet should be forwarded on the
port configured in the SA. Security session will be configured on that
port only, and sending the packet on other ports could result in
unencrypted packets being sent out.

This would have performance improvements too, as the per packet LPM
lookup would be avoided for IPsec packets, in inline mode.

Fixes: ec17993a145a ("examples/ipsec-secgw: support security offload")

Signed-off-by: Anoob Joseph <anoob.joseph@cavium.com>
---
 examples/ipsec-secgw/ipsec-secgw.c | 92 ++++++++++++++++++++++++++++++++------
 1 file changed, 78 insertions(+), 14 deletions(-)

diff --git a/examples/ipsec-secgw/ipsec-secgw.c b/examples/ipsec-secgw/ipsec-secgw.c
index c98454a..80cdff3 100644
--- a/examples/ipsec-secgw/ipsec-secgw.c
+++ b/examples/ipsec-secgw/ipsec-secgw.c
@@ -585,31 +585,72 @@ process_pkts_outbound_nosp(struct ipsec_ctx *ipsec_ctx,
 		traffic->ip6.num = nb_pkts_out;
 }
 
+static inline int32_t
+get_hop_for_offload_pkt(struct rte_mbuf *pkt)
+{
+	struct ipsec_mbuf_metadata *priv;
+	struct ipsec_sa *sa;
+
+	priv = get_priv(pkt);
+
+	sa = priv->sa;
+	if (unlikely(sa == NULL)) {
+		RTE_LOG(ERR, IPSEC, "SA not saved in private data\n");
+		return -1;
+	}
+
+	return sa->portid;
+}
+
 static inline void
 route4_pkts(struct rt_ctx *rt_ctx, struct rte_mbuf *pkts[], uint8_t nb_pkts)
 {
 	uint32_t hop[MAX_PKT_BURST * 2];
 	uint32_t dst_ip[MAX_PKT_BURST * 2];
+	int32_t pkt_hop = 0;
 	uint16_t i, offset;
+	uint16_t lpm_pkts = 0;
 
 	if (nb_pkts == 0)
 		return;
 
+	/* Need to do an LPM lookup for non-offload packets. Offload packets
+	 * will have port ID in the SA
+	 */
+
 	for (i = 0; i < nb_pkts; i++) {
-		offset = offsetof(struct ip, ip_dst);
-		dst_ip[i] = *rte_pktmbuf_mtod_offset(pkts[i],
-				uint32_t *, offset);
-		dst_ip[i] = rte_be_to_cpu_32(dst_ip[i]);
+		if (!(pkts[i]->ol_flags & PKT_TX_SEC_OFFLOAD)) {
+			/* Security offload not enabled. So an LPM lookup is
+			 * required to get the hop
+			 */
+			offset = offsetof(struct ip, ip_dst);
+			dst_ip[lpm_pkts] = *rte_pktmbuf_mtod_offset(pkts[i],
+					uint32_t *, offset);
+			dst_ip[lpm_pkts] = rte_be_to_cpu_32(dst_ip[lpm_pkts]);
+			lpm_pkts++;
+		}
 	}
 
-	rte_lpm_lookup_bulk((struct rte_lpm *)rt_ctx, dst_ip, hop, nb_pkts);
+	rte_lpm_lookup_bulk((struct rte_lpm *)rt_ctx, dst_ip, hop, lpm_pkts);
+
+	lpm_pkts = 0;
 
 	for (i = 0; i < nb_pkts; i++) {
-		if ((hop[i] & RTE_LPM_LOOKUP_SUCCESS) == 0) {
+		if ((pkts[i]->ol_flags & PKT_TX_SEC_OFFLOAD)) {
+			/* Read hop from the SA */
+			pkt_hop = get_hop_for_offload_pkt(pkts[i]);
+		} else {
+			/* Need to use hop returned by lookup */
+			pkt_hop = hop[lpm_pkts++];
+			if ((pkt_hop & RTE_LPM_LOOKUP_SUCCESS) == 0)
+				pkt_hop = -1;
+		}
+
+		if (pkt_hop == -1) {
 			rte_pktmbuf_free(pkts[i]);
 			continue;
 		}
-		send_single_packet(pkts[i], hop[i] & 0xff);
+		send_single_packet(pkts[i], pkt_hop & 0xff);
 	}
 }
 
@@ -619,26 +660,49 @@ route6_pkts(struct rt_ctx *rt_ctx, struct rte_mbuf *pkts[], uint8_t nb_pkts)
 	int32_t hop[MAX_PKT_BURST * 2];
 	uint8_t dst_ip[MAX_PKT_BURST * 2][16];
 	uint8_t *ip6_dst;
+	int32_t pkt_hop = 0;
 	uint16_t i, offset;
+	uint16_t lpm_pkts = 0;
 
 	if (nb_pkts == 0)
 		return;
 
+	/* Need to do an LPM lookup for non-offload packets. Offload packets
+	 * will have port ID in the SA
+	 */
+
 	for (i = 0; i < nb_pkts; i++) {
-		offset = offsetof(struct ip6_hdr, ip6_dst);
-		ip6_dst = rte_pktmbuf_mtod_offset(pkts[i], uint8_t *, offset);
-		memcpy(&dst_ip[i][0], ip6_dst, 16);
+		if (!(pkts[i]->ol_flags & PKT_TX_SEC_OFFLOAD)) {
+			/* Security offload not enabled. So an LPM lookup is
+			 * required to get the hop
+			 */
+			offset = offsetof(struct ip6_hdr, ip6_dst);
+			ip6_dst = rte_pktmbuf_mtod_offset(pkts[i], uint8_t *,
+					offset);
+			memcpy(&dst_ip[lpm_pkts][0], ip6_dst, 16);
+			lpm_pkts++;
+		}
 	}
 
-	rte_lpm6_lookup_bulk_func((struct rte_lpm6 *)rt_ctx, dst_ip,
-			hop, nb_pkts);
+	rte_lpm6_lookup_bulk_func((struct rte_lpm6 *)rt_ctx, dst_ip, hop,
+			lpm_pkts);
+
+	lpm_pkts = 0;
 
 	for (i = 0; i < nb_pkts; i++) {
-		if (hop[i] == -1) {
+		if ((pkts[i]->ol_flags & PKT_TX_SEC_OFFLOAD) == 0) {
+			/* Read hop from the SA */
+			pkt_hop = get_hop_for_offload_pkt(pkts[i]);
+		} else {
+			/* Need to use hop returned by lookup */
+			pkt_hop = hop[lpm_pkts++];
+		}
+
+		if (pkt_hop == -1) {
 			rte_pktmbuf_free(pkts[i]);
 			continue;
 		}
-		send_single_packet(pkts[i], hop[i] & 0xff);
+		send_single_packet(pkts[i], pkt_hop & 0xff);
 	}
 }
 
-- 
2.7.4

^ permalink raw reply related	[flat|nested] 21+ messages in thread