* [U-Boot] [PATCH v3 1/9] i.MX6: engicam: Move set_fdt_file to common
2017-11-20 18:32 [U-Boot] [PATCH v3 0/9] i.MX6: engicam: Add SPL_OF_CONTROL support Jagan Teki
@ 2017-11-20 18:32 ` Jagan Teki
2017-11-20 18:32 ` [U-Boot] [PATCH v3 2/9] i.MX6Q: icorem6: Move spl load fit to common/spl Jagan Teki
` (8 subsequent siblings)
9 siblings, 0 replies; 11+ messages in thread
From: Jagan Teki @ 2017-11-20 18:32 UTC (permalink / raw)
To: u-boot
setenv_fdt_file to common code and set dtb based on
CONFIG_DEFAULT_DEVICE_TREE and cpu_type.
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
---
board/engicam/common/board.c | 24 ++++++++++++++++++++++++
board/engicam/common/board.h | 1 -
board/engicam/geam6ul/geam6ul.c | 6 ------
board/engicam/icorem6/icorem6.c | 8 --------
board/engicam/icorem6_rqs/icorem6_rqs.c | 8 --------
board/engicam/isiotmx6ul/isiotmx6ul.c | 11 -----------
6 files changed, 24 insertions(+), 34 deletions(-)
diff --git a/board/engicam/common/board.c b/board/engicam/common/board.c
index c7ec55f..f86fb2b 100644
--- a/board/engicam/common/board.c
+++ b/board/engicam/common/board.c
@@ -32,6 +32,30 @@ static void mmc_late_init(void)
}
#endif
+static void setenv_fdt_file(void)
+{
+ const char *cmp_dtb = CONFIG_DEFAULT_DEVICE_TREE;
+
+ if (!strcmp(cmp_dtb, "imx6q-icore")) {
+ if (is_mx6dq())
+ env_set("fdt_file", "imx6q-icore.dtb");
+ else if(is_mx6dl() || is_mx6solo())
+ env_set("fdt_file", "imx6dl-icore.dtb");
+ } else if (!strcmp(cmp_dtb, "imx6q-icore-rqs")) {
+ if (is_mx6dq())
+ env_set("fdt_file", "imx6q-icore-rqs.dtb");
+ else if(is_mx6dl() || is_mx6solo())
+ env_set("fdt_file", "imx6dl-icore-rqs.dtb");
+ } else if (!strcmp(cmp_dtb, "imx6ul-geam-kit"))
+ env_set("fdt_file", "imx6ul-geam-kit.dtb");
+ else if (!strcmp(cmp_dtb, "imx6ul-isiot-mmc"))
+ env_set("fdt_file", "imx6ul-isiot-mmc.dtb");
+ else if (!strcmp(cmp_dtb, "imx6ul-isiot-emmc"))
+ env_set("fdt_file", "imx6ul-isiot-emmc.dtb");
+ else if (!strcmp(cmp_dtb, "imx6ul-isiot-nand"))
+ env_set("fdt_file", "imx6ul-isiot-nand.dtb");
+}
+
int board_late_init(void)
{
switch ((imx6_src_get_boot_mode() & IMX6_BMODE_MASK) >>
diff --git a/board/engicam/common/board.h b/board/engicam/common/board.h
index f364a23..c720b0b 100644
--- a/board/engicam/common/board.h
+++ b/board/engicam/common/board.h
@@ -6,7 +6,6 @@
#ifndef _BOARD_H_
#define _BOARD_H_
-void setenv_fdt_file(void);
void setup_gpmi_nand(void);
void setup_display(void);
#endif /* _BOARD_H_ */
diff --git a/board/engicam/geam6ul/geam6ul.c b/board/engicam/geam6ul/geam6ul.c
index ffd383a..15bd8b2 100644
--- a/board/engicam/geam6ul/geam6ul.c
+++ b/board/engicam/geam6ul/geam6ul.c
@@ -90,12 +90,6 @@ void setup_gpmi_nand(void)
}
#endif /* CONFIG_NAND_MXS */
-void setenv_fdt_file(void)
-{
- if (is_mx6ul())
- env_set("fdt_file", "imx6ul-geam-kit.dtb");
-}
-
#ifdef CONFIG_SPL_BUILD
/* MMC board initialization is needed till adding DM support in SPL */
#if defined(CONFIG_FSL_ESDHC) && !defined(CONFIG_DM_MMC)
diff --git a/board/engicam/icorem6/icorem6.c b/board/engicam/icorem6/icorem6.c
index 3d4f713..59c085b 100644
--- a/board/engicam/icorem6/icorem6.c
+++ b/board/engicam/icorem6/icorem6.c
@@ -192,14 +192,6 @@ void setup_display(void)
}
#endif /* CONFIG_VIDEO_IPUV3 */
-void setenv_fdt_file(void)
-{
- if (is_mx6dq())
- env_set("fdt_file", "imx6q-icore.dtb");
- else if(is_mx6dl() || is_mx6solo())
- env_set("fdt_file", "imx6dl-icore.dtb");
-}
-
#ifdef CONFIG_SPL_BUILD
/* MMC board initialization is needed till adding DM support in SPL */
#if defined(CONFIG_FSL_ESDHC) && !defined(CONFIG_DM_MMC)
diff --git a/board/engicam/icorem6_rqs/icorem6_rqs.c b/board/engicam/icorem6_rqs/icorem6_rqs.c
index 0114889..8afc9be 100644
--- a/board/engicam/icorem6_rqs/icorem6_rqs.c
+++ b/board/engicam/icorem6_rqs/icorem6_rqs.c
@@ -31,14 +31,6 @@ int board_mmc_get_env_dev(int devno)
}
#endif
-void setenv_fdt_file(void)
-{
- if (is_mx6dq())
- env_set("fdt_file", "imx6q-icore-rqs.dtb");
- else if(is_mx6dl() || is_mx6solo())
- env_set("fdt_file", "imx6dl-icore-rqs.dtb");
-}
-
#ifdef CONFIG_SPL_BUILD
#include <spl.h>
diff --git a/board/engicam/isiotmx6ul/isiotmx6ul.c b/board/engicam/isiotmx6ul/isiotmx6ul.c
index fbf1724..9afa8e4 100644
--- a/board/engicam/isiotmx6ul/isiotmx6ul.c
+++ b/board/engicam/isiotmx6ul/isiotmx6ul.c
@@ -98,17 +98,6 @@ int board_mmc_get_env_dev(int devno)
}
#endif
-void setenv_fdt_file(void)
-{
- if (is_mx6ul()) {
-#ifdef CONFIG_ENV_IS_IN_MMC
- env_set("fdt_file", "imx6ul-isiot-emmc.dtb");
-#else
- env_set("fdt_file", "imx6ul-isiot-nand.dtb");
-#endif
- }
-}
-
#ifdef CONFIG_SPL_BUILD
#include <spl.h>
--
2.7.4
^ permalink raw reply related [flat|nested] 11+ messages in thread* [U-Boot] [PATCH v3 2/9] i.MX6Q: icorem6: Move spl load fit to common/spl
2017-11-20 18:32 [U-Boot] [PATCH v3 0/9] i.MX6: engicam: Add SPL_OF_CONTROL support Jagan Teki
2017-11-20 18:32 ` [U-Boot] [PATCH v3 1/9] i.MX6: engicam: Move set_fdt_file to common Jagan Teki
@ 2017-11-20 18:32 ` Jagan Teki
2017-11-20 18:32 ` [U-Boot] [PATCH v3 3/9] i.MX6Q: icore: Add SPL_OF_CONTROL support Jagan Teki
` (7 subsequent siblings)
9 siblings, 0 replies; 11+ messages in thread
From: Jagan Teki @ 2017-11-20 18:32 UTC (permalink / raw)
To: u-boot
Move spl load fit code into common/spl
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
---
board/engicam/common/spl.c | 16 ++++++++++++++++
board/engicam/icorem6/icorem6.c | 12 ------------
board/engicam/icorem6_rqs/icorem6_rqs.c | 12 ------------
3 files changed, 16 insertions(+), 24 deletions(-)
diff --git a/board/engicam/common/spl.c b/board/engicam/common/spl.c
index 8711418..f8ae3ac 100644
--- a/board/engicam/common/spl.c
+++ b/board/engicam/common/spl.c
@@ -39,6 +39,22 @@ static iomux_v3_cfg_t const uart_pads[] = {
#endif
};
+#ifdef CONFIG_SPL_LOAD_FIT
+int board_fit_config_name_match(const char *name)
+{
+ if (is_mx6dq() && !strcmp(name, "imx6q-icore"))
+ return 0;
+ else if (is_mx6dq() && !strcmp(name, "imx6q-icore-rqs"))
+ return 0;
+ else if ((is_mx6dl() || is_mx6solo()) && !strcmp(name, "imx6dl-icore"))
+ return 0;
+ else if ((is_mx6dl() || is_mx6solo()) && !strcmp(name, "imx6dl-icore-rqs"))
+ return 0;
+ else
+ return -1;
+}
+#endif
+
#ifdef CONFIG_SPL_OS_BOOT
int spl_start_uboot(void)
{
diff --git a/board/engicam/icorem6/icorem6.c b/board/engicam/icorem6/icorem6.c
index 59c085b..e173124 100644
--- a/board/engicam/icorem6/icorem6.c
+++ b/board/engicam/icorem6/icorem6.c
@@ -264,16 +264,4 @@ int board_mmc_init(bd_t *bis)
return 0;
}
#endif
-
-#ifdef CONFIG_SPL_LOAD_FIT
-int board_fit_config_name_match(const char *name)
-{
- if (is_mx6dq() && !strcmp(name, "imx6q-icore"))
- return 0;
- else if ((is_mx6dl() || is_mx6solo()) && !strcmp(name, "imx6dl-icore"))
- return 0;
- else
- return -1;
-}
-#endif
#endif /* CONFIG_SPL_BUILD */
diff --git a/board/engicam/icorem6_rqs/icorem6_rqs.c b/board/engicam/icorem6_rqs/icorem6_rqs.c
index 8afc9be..84ab936 100644
--- a/board/engicam/icorem6_rqs/icorem6_rqs.c
+++ b/board/engicam/icorem6_rqs/icorem6_rqs.c
@@ -147,16 +147,4 @@ void board_boot_order(u32 *spl_boot_list)
}
#endif
#endif
-
-#ifdef CONFIG_SPL_LOAD_FIT
-int board_fit_config_name_match(const char *name)
-{
- if (is_mx6dq() && !strcmp(name, "imx6q-icore-rqs"))
- return 0;
- else if ((is_mx6dl() || is_mx6solo()) && !strcmp(name, "imx6dl-icore-rqs"))
- return 0;
- else
- return -1;
-}
-#endif
#endif /* CONFIG_SPL_BUILD */
--
2.7.4
^ permalink raw reply related [flat|nested] 11+ messages in thread* [U-Boot] [PATCH v3 3/9] i.MX6Q: icore: Add SPL_OF_CONTROL support
2017-11-20 18:32 [U-Boot] [PATCH v3 0/9] i.MX6: engicam: Add SPL_OF_CONTROL support Jagan Teki
2017-11-20 18:32 ` [U-Boot] [PATCH v3 1/9] i.MX6: engicam: Move set_fdt_file to common Jagan Teki
2017-11-20 18:32 ` [U-Boot] [PATCH v3 2/9] i.MX6Q: icorem6: Move spl load fit to common/spl Jagan Teki
@ 2017-11-20 18:32 ` Jagan Teki
2017-11-20 18:32 ` [U-Boot] [PATCH v3 4/9] pinctrl: imx6ul: Fix pinctrl data overlapped with DT area Jagan Teki
` (6 subsequent siblings)
9 siblings, 0 replies; 11+ messages in thread
From: Jagan Teki @ 2017-11-20 18:32 UTC (permalink / raw)
To: u-boot
Add OF_CONTROL support for SPL code.
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
---
arch/arm/dts/imx6qdl-icore-rqs.dtsi | 2 +
arch/arm/dts/imx6qdl-icore.dtsi | 2 +
arch/arm/dts/imx6qdl.dtsi | 5 ++
arch/arm/mach-imx/mx6/Kconfig | 8 +++
board/engicam/icorem6/icorem6.c | 75 -----------------------
board/engicam/icorem6_rqs/icorem6_rqs.c | 102 --------------------------------
configs/imx6qdl_icore_mmc_defconfig | 1 +
configs/imx6qdl_icore_rqs_defconfig | 1 +
include/configs/imx6-engicam.h | 22 +++----
9 files changed, 31 insertions(+), 187 deletions(-)
diff --git a/arch/arm/dts/imx6qdl-icore-rqs.dtsi b/arch/arm/dts/imx6qdl-icore-rqs.dtsi
index 8b9d5b4..65cbf5a 100644
--- a/arch/arm/dts/imx6qdl-icore-rqs.dtsi
+++ b/arch/arm/dts/imx6qdl-icore-rqs.dtsi
@@ -100,6 +100,7 @@
};
&usdhc3 {
+ u-boot,dm-spl;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usdhc3>;
cd-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
@@ -165,6 +166,7 @@
};
pinctrl_usdhc3: usdhc3grp {
+ u-boot,dm-spl;
fsl,pins = <
MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17070
MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10070
diff --git a/arch/arm/dts/imx6qdl-icore.dtsi b/arch/arm/dts/imx6qdl-icore.dtsi
index a485c3e..06d9bc3 100644
--- a/arch/arm/dts/imx6qdl-icore.dtsi
+++ b/arch/arm/dts/imx6qdl-icore.dtsi
@@ -118,6 +118,7 @@
};
&usdhc1 {
+ u-boot,dm-spl;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usdhc1>;
cd-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
@@ -208,6 +209,7 @@
};
pinctrl_usdhc1: usdhc1grp {
+ u-boot,dm-spl;
fsl,pins = <
MX6QDL_PAD_SD1_CMD__SD1_CMD 0x17070
MX6QDL_PAD_SD1_CLK__SD1_CLK 0x10070
diff --git a/arch/arm/dts/imx6qdl.dtsi b/arch/arm/dts/imx6qdl.dtsi
index b13b0b2..e04b570 100644
--- a/arch/arm/dts/imx6qdl.dtsi
+++ b/arch/arm/dts/imx6qdl.dtsi
@@ -77,6 +77,7 @@
compatible = "simple-bus";
interrupt-parent = <&gpc>;
ranges;
+ u-boot,dm-spl;
dma_apbh: dma-apbh at 00110000 {
compatible = "fsl,imx6q-dma-apbh", "fsl,imx28-dma-apbh";
@@ -225,6 +226,7 @@
#size-cells = <1>;
reg = <0x02000000 0x100000>;
ranges;
+ u-boot,dm-spl;
spba-bus at 02000000 {
compatible = "fsl,spba-bus", "simple-bus";
@@ -516,6 +518,7 @@
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
+ u-boot,dm-spl;
};
gpio2: gpio at 020a0000 {
@@ -805,6 +808,7 @@
iomuxc: iomuxc at 020e0000 {
compatible = "fsl,imx6dl-iomuxc", "fsl,imx6q-iomuxc";
reg = <0x020e0000 0x4000>;
+ u-boot,dm-spl;
};
ldb: ldb at 020e0008 {
@@ -889,6 +893,7 @@
#size-cells = <1>;
reg = <0x02100000 0x100000>;
ranges;
+ u-boot,dm-spl;
crypto: caam at 2100000 {
compatible = "fsl,sec-v4.0";
diff --git a/arch/arm/mach-imx/mx6/Kconfig b/arch/arm/mach-imx/mx6/Kconfig
index fd73c67..b9aec2f 100644
--- a/arch/arm/mach-imx/mx6/Kconfig
+++ b/arch/arm/mach-imx/mx6/Kconfig
@@ -213,6 +213,10 @@ config TARGET_MX6Q_ICORE
select DM_THERMAL
select SUPPORT_SPL
select SPL_LOAD_FIT
+ select SPL_DM if SPL
+ select SPL_OF_CONTROL if SPL
+ select SPL_SEPARATE_BSS if SPL
+ select SPL_PINCTRL if SPL
config TARGET_MX6Q_ICORE_RQS
bool "Support Engicam i.Core RQS"
@@ -228,6 +232,10 @@ config TARGET_MX6Q_ICORE_RQS
select DM_THERMAL
select SUPPORT_SPL
select SPL_LOAD_FIT
+ select SPL_DM if SPL
+ select SPL_OF_CONTROL if SPL
+ select SPL_SEPARATE_BSS if SPL
+ select SPL_PINCTRL if SPL
config TARGET_MX6SABREAUTO
bool "mx6sabreauto"
diff --git a/board/engicam/icorem6/icorem6.c b/board/engicam/icorem6/icorem6.c
index e173124..a967ccd 100644
--- a/board/engicam/icorem6/icorem6.c
+++ b/board/engicam/icorem6/icorem6.c
@@ -7,7 +7,6 @@
*/
#include <common.h>
-#include <mmc.h>
#include <asm/io.h>
#include <asm/gpio.h>
@@ -191,77 +190,3 @@ void setup_display(void)
writel(reg, &iomux->gpr[3]);
}
#endif /* CONFIG_VIDEO_IPUV3 */
-
-#ifdef CONFIG_SPL_BUILD
-/* MMC board initialization is needed till adding DM support in SPL */
-#if defined(CONFIG_FSL_ESDHC) && !defined(CONFIG_DM_MMC)
-#include <mmc.h>
-#include <fsl_esdhc.h>
-
-#define USDHC_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_PUE | \
- PAD_CTL_PUS_22K_UP | PAD_CTL_SPEED_LOW | \
- PAD_CTL_DSE_80ohm | PAD_CTL_SRE_FAST | PAD_CTL_HYS)
-
-static iomux_v3_cfg_t const usdhc1_pads[] = {
- IOMUX_PADS(PAD_SD1_CLK__SD1_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
- IOMUX_PADS(PAD_SD1_CMD__SD1_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
- IOMUX_PADS(PAD_SD1_DAT0__SD1_DATA0 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
- IOMUX_PADS(PAD_SD1_DAT1__SD1_DATA1 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
- IOMUX_PADS(PAD_SD1_DAT2__SD1_DATA2 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
- IOMUX_PADS(PAD_SD1_DAT3__SD1_DATA3 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
- IOMUX_PADS(PAD_GPIO_1__GPIO1_IO01 | MUX_PAD_CTRL(NO_PAD_CTRL)),/* CD */
-};
-
-#define USDHC1_CD_GPIO IMX_GPIO_NR(1, 1)
-
-struct fsl_esdhc_cfg usdhc_cfg[1] = {
- {USDHC1_BASE_ADDR, 0, 4},
-};
-
-int board_mmc_getcd(struct mmc *mmc)
-{
- struct fsl_esdhc_cfg *cfg = (struct fsl_esdhc_cfg *)mmc->priv;
- int ret = 0;
-
- switch (cfg->esdhc_base) {
- case USDHC1_BASE_ADDR:
- ret = !gpio_get_value(USDHC1_CD_GPIO);
- break;
- }
-
- return ret;
-}
-
-int board_mmc_init(bd_t *bis)
-{
- int i, ret;
-
- /*
- * According to the board_mmc_init() the following map is done:
- * (U-boot device node) (Physical Port)
- * mmc0 USDHC1
- */
- for (i = 0; i < CONFIG_SYS_FSL_USDHC_NUM; i++) {
- switch (i) {
- case 0:
- SETUP_IOMUX_PADS(usdhc1_pads);
- gpio_direction_input(USDHC1_CD_GPIO);
- usdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC_CLK);
- break;
- default:
- printf("Warning - USDHC%d controller not supporting\n",
- i + 1);
- return 0;
- }
-
- ret = fsl_esdhc_initialize(bis, &usdhc_cfg[i]);
- if (ret) {
- printf("Warning: failed to initialize mmc dev %d\n", i);
- return ret;
- }
- }
-
- return 0;
-}
-#endif
-#endif /* CONFIG_SPL_BUILD */
diff --git a/board/engicam/icorem6_rqs/icorem6_rqs.c b/board/engicam/icorem6_rqs/icorem6_rqs.c
index 84ab936..cd73dfa 100644
--- a/board/engicam/icorem6_rqs/icorem6_rqs.c
+++ b/board/engicam/icorem6_rqs/icorem6_rqs.c
@@ -6,21 +6,7 @@
* SPDX-License-Identifier: GPL-2.0+
*/
-#include <common.h>
-#include <mmc.h>
-
-#include <asm/io.h>
-#include <asm/gpio.h>
-#include <linux/sizes.h>
-
-#include <asm/arch/clock.h>
-#include <asm/arch/crm_regs.h>
-#include <asm/arch/iomux.h>
-#include <asm/arch/mx6-pins.h>
#include <asm/arch/sys_proto.h>
-#include <asm/mach-imx/iomux-v3.h>
-
-#include "../common/board.h"
DECLARE_GLOBAL_DATA_PTR;
@@ -34,93 +20,6 @@ int board_mmc_get_env_dev(int devno)
#ifdef CONFIG_SPL_BUILD
#include <spl.h>
-/* MMC board initialization is needed till adding DM support in SPL */
-#if defined(CONFIG_FSL_ESDHC) && !defined(CONFIG_DM_MMC)
-#include <mmc.h>
-#include <fsl_esdhc.h>
-
-#define USDHC_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_PUE | \
- PAD_CTL_PUS_47K_UP | PAD_CTL_SPEED_HIGH | \
- PAD_CTL_DSE_40ohm | PAD_CTL_SRE_FAST | PAD_CTL_HYS)
-
-static iomux_v3_cfg_t const usdhc3_pads[] = {
- IOMUX_PADS(PAD_SD3_CLK__SD3_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
- IOMUX_PADS(PAD_SD3_CMD__SD3_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
- IOMUX_PADS(PAD_SD3_DAT0__SD3_DATA0 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
- IOMUX_PADS(PAD_SD3_DAT1__SD3_DATA1 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
- IOMUX_PADS(PAD_SD3_DAT2__SD3_DATA2 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
- IOMUX_PADS(PAD_SD3_DAT3__SD3_DATA3 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
-};
-
-static iomux_v3_cfg_t const usdhc4_pads[] = {
- IOMUX_PADS(PAD_SD4_CLK__SD4_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
- IOMUX_PADS(PAD_SD4_CMD__SD4_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
- IOMUX_PADS(PAD_SD4_DAT0__SD4_DATA0 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
- IOMUX_PADS(PAD_SD4_DAT1__SD4_DATA1 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
- IOMUX_PADS(PAD_SD4_DAT2__SD4_DATA2 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
- IOMUX_PADS(PAD_SD4_DAT3__SD4_DATA3 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
- IOMUX_PADS(PAD_SD4_DAT4__SD4_DATA4 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
- IOMUX_PADS(PAD_SD4_DAT5__SD4_DATA5 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
- IOMUX_PADS(PAD_SD4_DAT6__SD4_DATA6 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
- IOMUX_PADS(PAD_SD4_DAT7__SD4_DATA7 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
-};
-
-struct fsl_esdhc_cfg usdhc_cfg[2] = {
- {USDHC3_BASE_ADDR, 1, 4},
- {USDHC4_BASE_ADDR, 1, 8},
-};
-
-int board_mmc_getcd(struct mmc *mmc)
-{
- struct fsl_esdhc_cfg *cfg = (struct fsl_esdhc_cfg *)mmc->priv;
- int ret = 0;
-
- switch (cfg->esdhc_base) {
- case USDHC3_BASE_ADDR:
- case USDHC4_BASE_ADDR:
- ret = 1;
- break;
- }
-
- return ret;
-}
-
-int board_mmc_init(bd_t *bis)
-{
- int i, ret;
-
- /*
- * According to the board_mmc_init() the following map is done:
- * (U-boot device node) (Physical Port)
- * mmc0 USDHC3
- * mmc1 USDHC4
- */
- for (i = 0; i < CONFIG_SYS_FSL_USDHC_NUM; i++) {
- switch (i) {
- case 0:
- SETUP_IOMUX_PADS(usdhc3_pads);
- usdhc_cfg[i].sdhc_clk = mxc_get_clock(MXC_ESDHC3_CLK);
- break;
- case 1:
- SETUP_IOMUX_PADS(usdhc4_pads);
- usdhc_cfg[i].sdhc_clk = mxc_get_clock(MXC_ESDHC4_CLK);
- break;
- default:
- printf("Warning - USDHC%d controller not supporting\n",
- i + 1);
- return 0;
- }
-
- ret = fsl_esdhc_initialize(bis, &usdhc_cfg[i]);
- if (ret) {
- printf("Warning: failed to initialize mmc dev %d\n", i);
- return ret;
- }
- }
-
- return 0;
-}
-
#ifdef CONFIG_ENV_IS_IN_MMC
void board_boot_order(u32 *spl_boot_list)
{
@@ -146,5 +45,4 @@ void board_boot_order(u32 *spl_boot_list)
spl_boot_list[0] = boot_dev;
}
#endif
-#endif
#endif /* CONFIG_SPL_BUILD */
diff --git a/configs/imx6qdl_icore_mmc_defconfig b/configs/imx6qdl_icore_mmc_defconfig
index 6e93c49..31cf1e6 100644
--- a/configs/imx6qdl_icore_mmc_defconfig
+++ b/configs/imx6qdl_icore_mmc_defconfig
@@ -48,3 +48,4 @@ CONFIG_MXC_UART=y
CONFIG_IMX_THERMAL=y
CONFIG_VIDEO=y
CONFIG_VIDEO_IPUV3=y
+CONFIG_SYS_MALLOC_F_LEN=0x2000
diff --git a/configs/imx6qdl_icore_rqs_defconfig b/configs/imx6qdl_icore_rqs_defconfig
index fbe9651..1e57deb 100644
--- a/configs/imx6qdl_icore_rqs_defconfig
+++ b/configs/imx6qdl_icore_rqs_defconfig
@@ -40,3 +40,4 @@ CONFIG_FEC_MXC=y
CONFIG_PINCTRL=y
CONFIG_PINCTRL_IMX6=y
CONFIG_MXC_UART=y
+CONFIG_SYS_MALLOC_F_LEN=0x2000
diff --git a/include/configs/imx6-engicam.h b/include/configs/imx6-engicam.h
index 86c1d38..b88afd7 100644
--- a/include/configs/imx6-engicam.h
+++ b/include/configs/imx6-engicam.h
@@ -216,16 +216,18 @@
# include "imx6_spl.h"
# ifdef CONFIG_SPL_BUILD
-# if defined(CONFIG_TARGET_MX6Q_ICORE_RQS) || defined(CONFIG_TARGET_MX6UL_ISIOT)
-# define CONFIG_SYS_FSL_USDHC_NUM 2
-# else
-# define CONFIG_SYS_FSL_USDHC_NUM 1
-# endif
-
-# define CONFIG_SYS_FSL_ESDHC_ADDR 0
-# undef CONFIG_DM_GPIO
-# undef CONFIG_DM_MMC
-# endif
+# if defined(CONFIG_IMX6UL)
+# if defined(CONFIG_TARGET_MX6UL_ISIOT)
+# define CONFIG_SYS_FSL_USDHC_NUM 2
+# else
+# define CONFIG_SYS_FSL_USDHC_NUM 1
+# endif
+
+# define CONFIG_SYS_FSL_ESDHC_ADDR 0
+# undef CONFIG_DM_GPIO
+# undef CONFIG_DM_MMC
+# endif /* CONFIG_IMX6UL */
+# endif /* CONFIG_SPL_BUILD */
#endif
#endif /* __IMX6_ENGICAM_CONFIG_H */
--
2.7.4
^ permalink raw reply related [flat|nested] 11+ messages in thread* [U-Boot] [PATCH v3 4/9] pinctrl: imx6ul: Fix pinctrl data overlapped with DT area
2017-11-20 18:32 [U-Boot] [PATCH v3 0/9] i.MX6: engicam: Add SPL_OF_CONTROL support Jagan Teki
` (2 preceding siblings ...)
2017-11-20 18:32 ` [U-Boot] [PATCH v3 3/9] i.MX6Q: icore: Add SPL_OF_CONTROL support Jagan Teki
@ 2017-11-20 18:32 ` Jagan Teki
2017-11-20 18:32 ` [U-Boot] [PATCH v3 5/9] i.MX6UL: icore: Add SPL_OF_CONTROL support Jagan Teki
` (5 subsequent siblings)
9 siblings, 0 replies; 11+ messages in thread
From: Jagan Teki @ 2017-11-20 18:32 UTC (permalink / raw)
To: u-boot
before relocation pinctrl data BSS is overlapping DT area,
when .data is using uninitialized global variable,
imx6_pinctrl_soc_info. So assign them flags ZERO_OFFSET_VALID
to prevent BSS overlap
Suggested-by: Lokesh Vutla <lokeshvutla@ti.com>
Reported-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
---
drivers/pinctrl/nxp/pinctrl-imx6.c | 7 ++++++-
1 file changed, 6 insertions(+), 1 deletion(-)
diff --git a/drivers/pinctrl/nxp/pinctrl-imx6.c b/drivers/pinctrl/nxp/pinctrl-imx6.c
index 0f767d9..cac577b 100644
--- a/drivers/pinctrl/nxp/pinctrl-imx6.c
+++ b/drivers/pinctrl/nxp/pinctrl-imx6.c
@@ -13,6 +13,11 @@
static struct imx_pinctrl_soc_info imx6_pinctrl_soc_info;
+/* FIXME Before reloaction, BSS is overlapped with DT area */
+static struct imx_pinctrl_soc_info imx6ul_pinctrl_soc_info = {
+ .flags = ZERO_OFFSET_VALID,
+};
+
static struct imx_pinctrl_soc_info imx6_snvs_pinctrl_soc_info = {
.flags = ZERO_OFFSET_VALID,
};
@@ -32,7 +37,7 @@ static const struct udevice_id imx6_pinctrl_match[] = {
{ .compatible = "fsl,imx6sll-iomuxc-snvs", .data = (ulong)&imx6_snvs_pinctrl_soc_info },
{ .compatible = "fsl,imx6sll-iomuxc", .data = (ulong)&imx6_pinctrl_soc_info },
{ .compatible = "fsl,imx6sx-iomuxc", .data = (ulong)&imx6_pinctrl_soc_info },
- { .compatible = "fsl,imx6ul-iomuxc", .data = (ulong)&imx6_pinctrl_soc_info },
+ { .compatible = "fsl,imx6ul-iomuxc", .data = (ulong)&imx6ul_pinctrl_soc_info },
{ .compatible = "fsl,imx6ull-iomuxc-snvs", .data = (ulong)&imx6_snvs_pinctrl_soc_info },
{ /* sentinel */ }
};
--
2.7.4
^ permalink raw reply related [flat|nested] 11+ messages in thread* [U-Boot] [PATCH v3 5/9] i.MX6UL: icore: Add SPL_OF_CONTROL support
2017-11-20 18:32 [U-Boot] [PATCH v3 0/9] i.MX6: engicam: Add SPL_OF_CONTROL support Jagan Teki
` (3 preceding siblings ...)
2017-11-20 18:32 ` [U-Boot] [PATCH v3 4/9] pinctrl: imx6ul: Fix pinctrl data overlapped with DT area Jagan Teki
@ 2017-11-20 18:32 ` Jagan Teki
2017-11-20 18:32 ` [U-Boot] [PATCH v3 6/9] board: icore-rqs: Fix mmc get env device Jagan Teki
` (4 subsequent siblings)
9 siblings, 0 replies; 11+ messages in thread
From: Jagan Teki @ 2017-11-20 18:32 UTC (permalink / raw)
To: u-boot
Add OF_CONTROL support for SPL code.
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
---
arch/arm/dts/imx6ul-geam-kit.dts | 4 ++
arch/arm/dts/imx6ul-isiot-emmc.dts | 2 +
arch/arm/dts/imx6ul-isiot.dtsi | 2 +
arch/arm/dts/imx6ul.dtsi | 6 ++
arch/arm/mach-imx/mx6/Kconfig | 9 +++
board/engicam/geam6ul/geam6ul.c | 81 ---------------------------
board/engicam/isiotmx6ul/isiotmx6ul.c | 101 ----------------------------------
configs/imx6ul_geam_mmc_defconfig | 1 +
configs/imx6ul_isiot_emmc_defconfig | 1 +
configs/imx6ul_isiot_mmc_defconfig | 1 +
include/configs/imx6-engicam.h | 13 -----
11 files changed, 26 insertions(+), 195 deletions(-)
diff --git a/arch/arm/dts/imx6ul-geam-kit.dts b/arch/arm/dts/imx6ul-geam-kit.dts
index 07c21cb..15e3f94 100644
--- a/arch/arm/dts/imx6ul-geam-kit.dts
+++ b/arch/arm/dts/imx6ul-geam-kit.dts
@@ -87,6 +87,7 @@
};
&usdhc1 {
+ u-boot,dm-spl;
pinctrl-names = "default", "state_100mhz", "state_200mhz";
pinctrl-0 = <&pinctrl_usdhc1>;
pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
@@ -134,6 +135,7 @@
};
pinctrl_usdhc1: usdhc1grp {
+ u-boot,dm-spl;
fsl,pins = <
MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x17059
MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x10059
@@ -145,6 +147,7 @@
};
pinctrl_usdhc1_100mhz: usdhc1grp100mhz {
+ u-boot,dm-spl;
fsl,pins = <
MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x170b9
MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x100b9
@@ -156,6 +159,7 @@
};
pinctrl_usdhc1_200mhz: usdhc1grp200mhz {
+ u-boot,dm-spl;
fsl,pins = <
MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x170f9
MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x100f9
diff --git a/arch/arm/dts/imx6ul-isiot-emmc.dts b/arch/arm/dts/imx6ul-isiot-emmc.dts
index 677de96..a611e3b 100644
--- a/arch/arm/dts/imx6ul-isiot-emmc.dts
+++ b/arch/arm/dts/imx6ul-isiot-emmc.dts
@@ -50,6 +50,7 @@
};
&usdhc2 {
+ u-boot,dm-spl;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usdhc2>;
cd-gpios = <&gpio4 5 GPIO_ACTIVE_LOW>;
@@ -60,6 +61,7 @@
&iomuxc {
pinctrl_usdhc2: usdhc2grp {
+ u-boot,dm-spl;
fsl,pins = <
MX6UL_PAD_NAND_RE_B__USDHC2_CLK 0x17070
MX6UL_PAD_NAND_WE_B__USDHC2_CMD 0x10070
diff --git a/arch/arm/dts/imx6ul-isiot.dtsi b/arch/arm/dts/imx6ul-isiot.dtsi
index 9a3c35c..5007a88 100644
--- a/arch/arm/dts/imx6ul-isiot.dtsi
+++ b/arch/arm/dts/imx6ul-isiot.dtsi
@@ -82,6 +82,7 @@
};
&usdhc1 {
+ u-boot,dm-spl;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usdhc1>;
cd-gpios = <&gpio1 19 GPIO_ACTIVE_LOW>;
@@ -128,6 +129,7 @@
};
pinctrl_usdhc1: usdhc1grp {
+ u-boot,dm-spl;
fsl,pins = <
MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x17059
MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x10059
diff --git a/arch/arm/dts/imx6ul.dtsi b/arch/arm/dts/imx6ul.dtsi
index def5f8c..7affab8 100644
--- a/arch/arm/dts/imx6ul.dtsi
+++ b/arch/arm/dts/imx6ul.dtsi
@@ -134,6 +134,7 @@
compatible = "simple-bus";
interrupt-parent = <&gpc>;
ranges;
+ u-boot,dm-spl;
pmu {
compatible = "arm,cortex-a7-pmu";
@@ -185,6 +186,7 @@
#size-cells = <1>;
reg = <0x02000000 0x100000>;
ranges;
+ u-boot,dm-spl;
spba-bus at 02000000 {
compatible = "fsl,spba-bus", "simple-bus";
@@ -415,6 +417,7 @@
#interrupt-cells = <2>;
gpio-ranges = <&iomuxc 0 23 10>, <&iomuxc 10 17 6>,
<&iomuxc 16 33 16>;
+ u-boot,dm-spl;
};
gpio2: gpio at 020a0000 {
@@ -451,6 +454,7 @@
interrupt-controller;
#interrupt-cells = <2>;
gpio-ranges = <&iomuxc 0 94 17>, <&iomuxc 17 117 12>;
+ u-boot,dm-spl;
};
gpio5: gpio at 020ac000 {
@@ -649,6 +653,7 @@
iomuxc: iomuxc at 020e0000 {
compatible = "fsl,imx6ul-iomuxc";
reg = <0x020e0000 0x4000>;
+ u-boot,dm-spl;
};
gpr: iomuxc-gpr at 020e4000 {
@@ -729,6 +734,7 @@
#size-cells = <1>;
reg = <0x02100000 0x100000>;
ranges;
+ u-boot,dm-spl;
usbotg1: usb at 02184000 {
compatible = "fsl,imx6ul-usb", "fsl,imx27-usb";
diff --git a/arch/arm/mach-imx/mx6/Kconfig b/arch/arm/mach-imx/mx6/Kconfig
index b9aec2f..770a3c1 100644
--- a/arch/arm/mach-imx/mx6/Kconfig
+++ b/arch/arm/mach-imx/mx6/Kconfig
@@ -308,6 +308,11 @@ config TARGET_MX6UL_GEAM
select DM_MMC
select DM_THERMAL
select SUPPORT_SPL
+ select SPL_DM if SPL
+ select SPL_OF_CONTROL if SPL
+ select SPL_SEPARATE_BSS if SPL
+ select SPL_PINCTRL if SPL
+
config TARGET_MX6UL_ISIOT
bool "Support Engicam Is.IoT MX6UL"
select BOARD_LATE_INIT
@@ -320,6 +325,10 @@ config TARGET_MX6UL_ISIOT
select DM_MMC
select DM_THERMAL
select SUPPORT_SPL
+ select SPL_DM if SPL
+ select SPL_OF_CONTROL if SPL
+ select SPL_SEPARATE_BSS if SPL
+ select SPL_PINCTRL if SPL
config TARGET_MX6ULL_14X14_EVK
bool "Support mx6ull_14x14_evk"
diff --git a/board/engicam/geam6ul/geam6ul.c b/board/engicam/geam6ul/geam6ul.c
index 15bd8b2..23e7e4b 100644
--- a/board/engicam/geam6ul/geam6ul.c
+++ b/board/engicam/geam6ul/geam6ul.c
@@ -7,7 +7,6 @@
*/
#include <common.h>
-#include <mmc.h>
#include <asm/io.h>
#include <asm/gpio.h>
@@ -89,83 +88,3 @@ void setup_gpmi_nand(void)
setbits_le32(&mxc_ccm->CCGR0, MXC_CCM_CCGR0_APBHDMA_MASK);
}
#endif /* CONFIG_NAND_MXS */
-
-#ifdef CONFIG_SPL_BUILD
-/* MMC board initialization is needed till adding DM support in SPL */
-#if defined(CONFIG_FSL_ESDHC) && !defined(CONFIG_DM_MMC)
-#include <mmc.h>
-#include <fsl_esdhc.h>
-
-#define USDHC_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_PUE | \
- PAD_CTL_PUS_22K_UP | PAD_CTL_SPEED_LOW | \
- PAD_CTL_DSE_80ohm | PAD_CTL_SRE_FAST | PAD_CTL_HYS)
-
-static iomux_v3_cfg_t const usdhc1_pads[] = {
- IOMUX_PADS(PAD_SD1_CLK__USDHC1_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
- IOMUX_PADS(PAD_SD1_CMD__USDHC1_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
- IOMUX_PADS(PAD_SD1_DATA0__USDHC1_DATA0 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
- IOMUX_PADS(PAD_SD1_DATA1__USDHC1_DATA1 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
- IOMUX_PADS(PAD_SD1_DATA2__USDHC1_DATA2 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
- IOMUX_PADS(PAD_SD1_DATA3__USDHC1_DATA3 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
-
- /* VSELECT */
- IOMUX_PADS(PAD_GPIO1_IO05__USDHC1_VSELECT | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
- /* CD */
- IOMUX_PADS(PAD_UART1_RTS_B__GPIO1_IO19 | MUX_PAD_CTRL(NO_PAD_CTRL)),
- /* RST_B */
- IOMUX_PADS(PAD_GPIO1_IO09__GPIO1_IO09 | MUX_PAD_CTRL(NO_PAD_CTRL)),
-};
-
-#define USDHC1_CD_GPIO IMX_GPIO_NR(1, 1)
-
-struct fsl_esdhc_cfg usdhc_cfg[1] = {
- {USDHC1_BASE_ADDR, 0, 4},
-};
-
-int board_mmc_getcd(struct mmc *mmc)
-{
- struct fsl_esdhc_cfg *cfg = (struct fsl_esdhc_cfg *)mmc->priv;
- int ret = 0;
-
- switch (cfg->esdhc_base) {
- case USDHC1_BASE_ADDR:
- ret = !gpio_get_value(USDHC1_CD_GPIO);
- break;
- }
-
- return ret;
-}
-
-int board_mmc_init(bd_t *bis)
-{
- int i, ret;
-
- /*
- * According to the board_mmc_init() the following map is done:
- * (U-boot device node) (Physical Port)
- * mmc0 USDHC1
- */
- for (i = 0; i < CONFIG_SYS_FSL_USDHC_NUM; i++) {
- switch (i) {
- case 0:
- SETUP_IOMUX_PADS(usdhc1_pads);
- gpio_direction_input(USDHC1_CD_GPIO);
- usdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC_CLK);
- break;
- default:
- printf("Warning - USDHC%d controller not supporting\n",
- i + 1);
- return 0;
- }
-
- ret = fsl_esdhc_initialize(bis, &usdhc_cfg[i]);
- if (ret) {
- printf("Warning: failed to initialize mmc dev %d\n", i);
- return ret;
- }
- }
-
- return 0;
-}
-#endif /* CONFIG_FSL_ESDHC */
-#endif /* CONFIG_SPL_BUILD */
diff --git a/board/engicam/isiotmx6ul/isiotmx6ul.c b/board/engicam/isiotmx6ul/isiotmx6ul.c
index 9afa8e4..05d23c2 100644
--- a/board/engicam/isiotmx6ul/isiotmx6ul.c
+++ b/board/engicam/isiotmx6ul/isiotmx6ul.c
@@ -101,106 +101,6 @@ int board_mmc_get_env_dev(int devno)
#ifdef CONFIG_SPL_BUILD
#include <spl.h>
-/* MMC board initialization is needed till adding DM support in SPL */
-#if defined(CONFIG_FSL_ESDHC) && !defined(CONFIG_DM_MMC)
-#include <mmc.h>
-#include <fsl_esdhc.h>
-
-#define USDHC_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_PUE | \
- PAD_CTL_PUS_22K_UP | PAD_CTL_SPEED_LOW | \
- PAD_CTL_DSE_80ohm | PAD_CTL_SRE_FAST | PAD_CTL_HYS)
-
-static iomux_v3_cfg_t const usdhc1_pads[] = {
- IOMUX_PADS(PAD_SD1_CLK__USDHC1_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
- IOMUX_PADS(PAD_SD1_CMD__USDHC1_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
- IOMUX_PADS(PAD_SD1_DATA0__USDHC1_DATA0 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
- IOMUX_PADS(PAD_SD1_DATA1__USDHC1_DATA1 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
- IOMUX_PADS(PAD_SD1_DATA2__USDHC1_DATA2 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
- IOMUX_PADS(PAD_SD1_DATA3__USDHC1_DATA3 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
-
- /* VSELECT */
- IOMUX_PADS(PAD_GPIO1_IO05__USDHC1_VSELECT | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
- /* CD */
- IOMUX_PADS(PAD_UART1_RTS_B__GPIO1_IO19 | MUX_PAD_CTRL(NO_PAD_CTRL)),
- /* RST_B */
- IOMUX_PADS(PAD_GPIO1_IO09__GPIO1_IO09 | MUX_PAD_CTRL(NO_PAD_CTRL)),
-};
-
-static iomux_v3_cfg_t const usdhc2_pads[] = {
- IOMUX_PADS(PAD_NAND_ALE__USDHC2_RESET_B | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
- IOMUX_PADS(PAD_NAND_RE_B__USDHC2_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
- IOMUX_PADS(PAD_NAND_WE_B__USDHC2_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
- IOMUX_PADS(PAD_NAND_DATA00__USDHC2_DATA0 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
- IOMUX_PADS(PAD_NAND_DATA01__USDHC2_DATA1 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
- IOMUX_PADS(PAD_NAND_DATA02__USDHC2_DATA2 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
- IOMUX_PADS(PAD_NAND_DATA03__USDHC2_DATA3 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
- IOMUX_PADS(PAD_NAND_DATA04__USDHC2_DATA4 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
- IOMUX_PADS(PAD_NAND_DATA05__USDHC2_DATA5 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
-};
-
-#define USDHC1_CD_GPIO IMX_GPIO_NR(1, 19)
-#define USDHC2_CD_GPIO IMX_GPIO_NR(4, 5)
-
-struct fsl_esdhc_cfg usdhc_cfg[2] = {
- {USDHC1_BASE_ADDR, 0, 4},
- {USDHC2_BASE_ADDR, 0, 8},
-};
-
-int board_mmc_getcd(struct mmc *mmc)
-{
- struct fsl_esdhc_cfg *cfg = (struct fsl_esdhc_cfg *)mmc->priv;
- int ret = 0;
-
- switch (cfg->esdhc_base) {
- case USDHC1_BASE_ADDR:
- ret = !gpio_get_value(USDHC1_CD_GPIO);
- break;
- case USDHC2_BASE_ADDR:
- ret = !gpio_get_value(USDHC2_CD_GPIO);
- break;
- }
-
- return ret;
-}
-
-int board_mmc_init(bd_t *bis)
-{
- int i, ret;
-
- /*
- * According to the board_mmc_init() the following map is done:
- * (U-boot device node) (Physical Port)
- * mmc0 USDHC1
- * mmc1 USDHC2
- */
- for (i = 0; i < CONFIG_SYS_FSL_USDHC_NUM; i++) {
- switch (i) {
- case 0:
- SETUP_IOMUX_PADS(usdhc1_pads);
- gpio_direction_input(USDHC1_CD_GPIO);
- usdhc_cfg[i].sdhc_clk = mxc_get_clock(MXC_ESDHC_CLK);
- break;
- case 1:
- SETUP_IOMUX_PADS(usdhc2_pads);
- gpio_direction_input(USDHC2_CD_GPIO);
- usdhc_cfg[i].sdhc_clk = mxc_get_clock(MXC_ESDHC2_CLK);
- break;
- default:
- printf("Warning - USDHC%d controller not supporting\n",
- i + 1);
- return 0;
- }
-
- ret = fsl_esdhc_initialize(bis, &usdhc_cfg[i]);
- if (ret) {
- printf("Warning: failed to initialize mmc dev %d\n", i);
- return ret;
- }
- }
-
- return 0;
-}
-
#ifdef CONFIG_ENV_IS_IN_MMC
void board_boot_order(u32 *spl_boot_list)
{
@@ -226,5 +126,4 @@ void board_boot_order(u32 *spl_boot_list)
spl_boot_list[0] = boot_dev;
}
#endif
-#endif /* CONFIG_FSL_ESDHC */
#endif /* CONFIG_SPL_BUILD */
diff --git a/configs/imx6ul_geam_mmc_defconfig b/configs/imx6ul_geam_mmc_defconfig
index ce7c288..c147d4a 100644
--- a/configs/imx6ul_geam_mmc_defconfig
+++ b/configs/imx6ul_geam_mmc_defconfig
@@ -40,3 +40,4 @@ CONFIG_PINCTRL=y
CONFIG_PINCTRL_IMX6=y
CONFIG_MXC_UART=y
CONFIG_IMX_THERMAL=y
+CONFIG_SYS_MALLOC_F_LEN=0x2000
diff --git a/configs/imx6ul_isiot_emmc_defconfig b/configs/imx6ul_isiot_emmc_defconfig
index 94af53e..5f8a574 100644
--- a/configs/imx6ul_isiot_emmc_defconfig
+++ b/configs/imx6ul_isiot_emmc_defconfig
@@ -38,3 +38,4 @@ CONFIG_PINCTRL=y
CONFIG_PINCTRL_IMX6=y
CONFIG_MXC_UART=y
CONFIG_IMX_THERMAL=y
+CONFIG_SYS_MALLOC_F_LEN=0x2000
diff --git a/configs/imx6ul_isiot_mmc_defconfig b/configs/imx6ul_isiot_mmc_defconfig
index 0a990d7..367dfa1 100644
--- a/configs/imx6ul_isiot_mmc_defconfig
+++ b/configs/imx6ul_isiot_mmc_defconfig
@@ -40,3 +40,4 @@ CONFIG_PINCTRL=y
CONFIG_PINCTRL_IMX6=y
CONFIG_MXC_UART=y
CONFIG_IMX_THERMAL=y
+CONFIG_SYS_MALLOC_F_LEN=0x2000
diff --git a/include/configs/imx6-engicam.h b/include/configs/imx6-engicam.h
index b88afd7..0c45e06 100644
--- a/include/configs/imx6-engicam.h
+++ b/include/configs/imx6-engicam.h
@@ -215,19 +215,6 @@
# endif
# include "imx6_spl.h"
-# ifdef CONFIG_SPL_BUILD
-# if defined(CONFIG_IMX6UL)
-# if defined(CONFIG_TARGET_MX6UL_ISIOT)
-# define CONFIG_SYS_FSL_USDHC_NUM 2
-# else
-# define CONFIG_SYS_FSL_USDHC_NUM 1
-# endif
-
-# define CONFIG_SYS_FSL_ESDHC_ADDR 0
-# undef CONFIG_DM_GPIO
-# undef CONFIG_DM_MMC
-# endif /* CONFIG_IMX6UL */
-# endif /* CONFIG_SPL_BUILD */
#endif
#endif /* __IMX6_ENGICAM_CONFIG_H */
--
2.7.4
^ permalink raw reply related [flat|nested] 11+ messages in thread* [U-Boot] [PATCH v3 6/9] board: icore-rqs: Fix mmc get env device
2017-11-20 18:32 [U-Boot] [PATCH v3 0/9] i.MX6: engicam: Add SPL_OF_CONTROL support Jagan Teki
` (4 preceding siblings ...)
2017-11-20 18:32 ` [U-Boot] [PATCH v3 5/9] i.MX6UL: icore: Add SPL_OF_CONTROL support Jagan Teki
@ 2017-11-20 18:32 ` Jagan Teki
2017-11-20 18:32 ` [U-Boot] [PATCH v3 7/9] i.MX6: engicam: Add imx6q/imx6ul boards for existing boards Jagan Teki
` (3 subsequent siblings)
9 siblings, 0 replies; 11+ messages in thread
From: Jagan Teki @ 2017-11-20 18:32 UTC (permalink / raw)
To: u-boot
As per USDHC boot eFUSE descriptions:
USDHC3 => devno 2
USDHC4 => devno 3
Linux will detect mmc0, mmc1, mmc2 based on the status
"okay" on usdhc so imx6qdl-icore-rqs.dtsi has enabled
usdhc1, usdhc3 and usdhc4.But U-Boot can detect based
on the aliases so add mmc1, mmc2 for usdhc3 and usdhc4
respectively and return the board_mmc_get_env_dev
by subtracting -1
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
---
arch/arm/dts/imx6qdl-icore-rqs.dtsi | 5 +++++
board/engicam/icorem6_rqs/icorem6_rqs.c | 2 +-
2 files changed, 6 insertions(+), 1 deletion(-)
diff --git a/arch/arm/dts/imx6qdl-icore-rqs.dtsi b/arch/arm/dts/imx6qdl-icore-rqs.dtsi
index 65cbf5a..816cdce 100644
--- a/arch/arm/dts/imx6qdl-icore-rqs.dtsi
+++ b/arch/arm/dts/imx6qdl-icore-rqs.dtsi
@@ -43,6 +43,11 @@
#include <dt-bindings/clock/imx6qdl-clock.h>
/ {
+ aliases {
+ mmc1 = &usdhc3;
+ mmc2 = &usdhc4;
+ };
+
memory {
reg = <0x10000000 0x80000000>;
};
diff --git a/board/engicam/icorem6_rqs/icorem6_rqs.c b/board/engicam/icorem6_rqs/icorem6_rqs.c
index cd73dfa..a55a754 100644
--- a/board/engicam/icorem6_rqs/icorem6_rqs.c
+++ b/board/engicam/icorem6_rqs/icorem6_rqs.c
@@ -13,7 +13,7 @@ DECLARE_GLOBAL_DATA_PTR;
#ifdef CONFIG_ENV_IS_IN_MMC
int board_mmc_get_env_dev(int devno)
{
- return devno;
+ return devno - 1;
}
#endif
--
2.7.4
^ permalink raw reply related [flat|nested] 11+ messages in thread* [U-Boot] [PATCH v3 7/9] i.MX6: engicam: Add imx6q/imx6ul boards for existing boards
2017-11-20 18:32 [U-Boot] [PATCH v3 0/9] i.MX6: engicam: Add SPL_OF_CONTROL support Jagan Teki
` (5 preceding siblings ...)
2017-11-20 18:32 ` [U-Boot] [PATCH v3 6/9] board: icore-rqs: Fix mmc get env device Jagan Teki
@ 2017-11-20 18:32 ` Jagan Teki
2017-11-20 18:32 ` [U-Boot] [PATCH v3 8/9] engicam: imx6q: Return mmc dev 0 for icore Jagan Teki
` (2 subsequent siblings)
9 siblings, 0 replies; 11+ messages in thread
From: Jagan Teki @ 2017-11-20 18:32 UTC (permalink / raw)
To: u-boot
Add new board names for existing board support
imx6q - icore and icore_rqs boards
imx6ul - geam6ul and isiot boards
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
---
arch/arm/mach-imx/mx6/Kconfig | 50 +-------
board/engicam/common/board.c | 2 +-
board/engicam/common/spl.c | 26 +++++
board/engicam/geam6ul/MAINTAINERS | 8 --
board/engicam/geam6ul/README | 28 -----
board/engicam/icorem6_rqs/Kconfig | 12 --
board/engicam/icorem6_rqs/MAINTAINERS | 9 --
board/engicam/icorem6_rqs/Makefile | 6 -
board/engicam/{geam6ul => imx6q}/Kconfig | 4 +-
board/engicam/{icorem6 => imx6q}/MAINTAINERS | 8 +-
board/engicam/{geam6ul => imx6q}/Makefile | 2 +-
board/engicam/{icorem6_rqs => imx6q}/README | 9 +-
board/engicam/{icorem6/icorem6.c => imx6q/imx6q.c} | 10 +-
board/engicam/{icorem6 => imx6ul}/Kconfig | 4 +-
board/engicam/{isiotmx6ul => imx6ul}/MAINTAINERS | 9 +-
board/engicam/{icorem6 => imx6ul}/Makefile | 2 +-
board/engicam/{icorem6 => imx6ul}/README | 11 +-
.../engicam/{geam6ul/geam6ul.c => imx6ul/imx6ul.c} | 9 ++
board/engicam/isiotmx6ul/Kconfig | 12 --
board/engicam/isiotmx6ul/Makefile | 6 -
board/engicam/isiotmx6ul/README | 28 -----
board/engicam/isiotmx6ul/isiotmx6ul.c | 129 ---------------------
configs/imx6qdl_icore_mmc_defconfig | 2 +-
configs/imx6qdl_icore_nand_defconfig | 2 +-
configs/imx6qdl_icore_rqs_defconfig | 2 +-
configs/imx6ul_geam_mmc_defconfig | 2 +-
configs/imx6ul_geam_nand_defconfig | 2 +-
configs/imx6ul_isiot_emmc_defconfig | 2 +-
configs/imx6ul_isiot_mmc_defconfig | 2 +-
configs/imx6ul_isiot_nand_defconfig | 2 +-
30 files changed, 89 insertions(+), 311 deletions(-)
delete mode 100644 board/engicam/geam6ul/MAINTAINERS
delete mode 100644 board/engicam/geam6ul/README
delete mode 100644 board/engicam/icorem6_rqs/Kconfig
delete mode 100644 board/engicam/icorem6_rqs/MAINTAINERS
delete mode 100644 board/engicam/icorem6_rqs/Makefile
rename board/engicam/{geam6ul => imx6q}/Kconfig (73%)
rename board/engicam/{icorem6 => imx6q}/MAINTAINERS (58%)
rename board/engicam/{geam6ul => imx6q}/Makefile (80%)
rename board/engicam/{icorem6_rqs => imx6q}/README (71%)
rename board/engicam/{icorem6/icorem6.c => imx6q/imx6q.c} (97%)
rename board/engicam/{icorem6 => imx6ul}/Kconfig (72%)
rename board/engicam/{isiotmx6ul => imx6ul}/MAINTAINERS (69%)
rename board/engicam/{icorem6 => imx6ul}/Makefile (80%)
rename board/engicam/{icorem6 => imx6ul}/README (74%)
rename board/engicam/{geam6ul/geam6ul.c => imx6ul/imx6ul.c} (95%)
delete mode 100644 board/engicam/isiotmx6ul/Kconfig
delete mode 100644 board/engicam/isiotmx6ul/Makefile
delete mode 100644 board/engicam/isiotmx6ul/README
delete mode 100644 board/engicam/isiotmx6ul/isiotmx6ul.c
diff --git a/arch/arm/mach-imx/mx6/Kconfig b/arch/arm/mach-imx/mx6/Kconfig
index 770a3c1..04883e5 100644
--- a/arch/arm/mach-imx/mx6/Kconfig
+++ b/arch/arm/mach-imx/mx6/Kconfig
@@ -199,27 +199,8 @@ config TARGET_MX6LOGICPD
config TARGET_MX6QARM2
bool "mx6qarm2"
-config TARGET_MX6Q_ICORE
- bool "Support Engicam i.Core"
- select BOARD_LATE_INIT
- select MX6QDL
- select OF_CONTROL
- select SPL_OF_LIBFDT
- select DM
- select DM_ETH
- select DM_GPIO
- select DM_I2C
- select DM_MMC
- select DM_THERMAL
- select SUPPORT_SPL
- select SPL_LOAD_FIT
- select SPL_DM if SPL
- select SPL_OF_CONTROL if SPL
- select SPL_SEPARATE_BSS if SPL
- select SPL_PINCTRL if SPL
-
-config TARGET_MX6Q_ICORE_RQS
- bool "Support Engicam i.Core RQS"
+config TARGET_MX6Q_ENGICAM
+ bool "Support Engicam i.Core(RQS)"
select BOARD_LATE_INIT
select MX6QDL
select OF_CONTROL
@@ -296,25 +277,8 @@ config TARGET_MX6UL_14X14_EVK
select DM_THERMAL
select SUPPORT_SPL
-config TARGET_MX6UL_GEAM
- bool "Support Engicam GEAM6UL"
- select BOARD_LATE_INIT
- select MX6UL
- select OF_CONTROL
- select DM
- select DM_ETH
- select DM_GPIO
- select DM_I2C
- select DM_MMC
- select DM_THERMAL
- select SUPPORT_SPL
- select SPL_DM if SPL
- select SPL_OF_CONTROL if SPL
- select SPL_SEPARATE_BSS if SPL
- select SPL_PINCTRL if SPL
-
-config TARGET_MX6UL_ISIOT
- bool "Support Engicam Is.IoT MX6UL"
+config TARGET_MX6UL_ENGICAM
+ bool "Support Engicam GEAM6UL/Is.IoT"
select BOARD_LATE_INIT
select MX6UL
select OF_CONTROL
@@ -463,10 +427,8 @@ source "board/congatec/cgtqmx6eval/Kconfig"
source "board/dhelectronics/dh_imx6/Kconfig"
source "board/el/el6x/Kconfig"
source "board/embest/mx6boards/Kconfig"
-source "board/engicam/geam6ul/Kconfig"
-source "board/engicam/icorem6/Kconfig"
-source "board/engicam/icorem6_rqs/Kconfig"
-source "board/engicam/isiotmx6ul/Kconfig"
+source "board/engicam/imx6q/Kconfig"
+source "board/engicam/imx6ul/Kconfig"
source "board/freescale/mx6qarm2/Kconfig"
source "board/freescale/mx6sabreauto/Kconfig"
source "board/freescale/mx6sabresd/Kconfig"
diff --git a/board/engicam/common/board.c b/board/engicam/common/board.c
index f86fb2b..f633c71 100644
--- a/board/engicam/common/board.c
+++ b/board/engicam/common/board.c
@@ -49,7 +49,7 @@ static void setenv_fdt_file(void)
} else if (!strcmp(cmp_dtb, "imx6ul-geam-kit"))
env_set("fdt_file", "imx6ul-geam-kit.dtb");
else if (!strcmp(cmp_dtb, "imx6ul-isiot-mmc"))
- env_set("fdt_file", "imx6ul-isiot-mmc.dtb");
+ env_set("fdt_file", "imx6ul-isiot-emmc.dtb");
else if (!strcmp(cmp_dtb, "imx6ul-isiot-emmc"))
env_set("fdt_file", "imx6ul-isiot-emmc.dtb");
else if (!strcmp(cmp_dtb, "imx6ul-isiot-nand"))
diff --git a/board/engicam/common/spl.c b/board/engicam/common/spl.c
index f8ae3ac..6e2389d 100644
--- a/board/engicam/common/spl.c
+++ b/board/engicam/common/spl.c
@@ -55,6 +55,32 @@ int board_fit_config_name_match(const char *name)
}
#endif
+#ifdef CONFIG_ENV_IS_IN_MMC
+void board_boot_order(u32 *spl_boot_list)
+{
+ u32 bmode = imx6_src_get_boot_mode();
+ u8 boot_dev = BOOT_DEVICE_MMC1;
+
+ switch ((bmode & IMX6_BMODE_MASK) >> IMX6_BMODE_SHIFT) {
+ case IMX6_BMODE_SD:
+ case IMX6_BMODE_ESD:
+ /* SD/eSD - BOOT_DEVICE_MMC1 */
+ break;
+ case IMX6_BMODE_MMC:
+ case IMX6_BMODE_EMMC:
+ /* MMC/eMMC */
+ boot_dev = BOOT_DEVICE_MMC2;
+ break;
+ default:
+ /* Default - BOOT_DEVICE_MMC1 */
+ printf("Wrong board boot order\n");
+ break;
+ }
+
+ spl_boot_list[0] = boot_dev;
+}
+#endif
+
#ifdef CONFIG_SPL_OS_BOOT
int spl_start_uboot(void)
{
diff --git a/board/engicam/geam6ul/MAINTAINERS b/board/engicam/geam6ul/MAINTAINERS
deleted file mode 100644
index 2b882d2..0000000
--- a/board/engicam/geam6ul/MAINTAINERS
+++ /dev/null
@@ -1,8 +0,0 @@
-GEAM6UL BOARD
-M: Jagan Teki <jagan@amarulasolutions.com>
-S: Maintained
-F: board/engicam/geam6ul
-F: include/configs/imx6-engicam.h
-F: configs/imx6ul_geam_mmc_defconfig
-F: configs/imx6ul_geam_nand_defconfig
-F: arch/arm/dts/imx6ul-geam-kit.dts
diff --git a/board/engicam/geam6ul/README b/board/engicam/geam6ul/README
deleted file mode 100644
index 0df6ae4..0000000
--- a/board/engicam/geam6ul/README
+++ /dev/null
@@ -1,28 +0,0 @@
-How to use U-Boot on Engicam GEAM6UL Starter Kit:
--------------------------------------------------
-
-- Configure U-Boot for Engicam GEAM6UL:
-
-$ make mrproper
-$ make imx6ul_geam_mmc_defconfig
-$ make
-
-This will generate the SPL image called SPL and the u-boot-dtb.img.
-
-- Flash the SPL image into the micro SD card:
-
-sudo dd if=SPL of=/dev/mmcblk0 bs=1k seek=1; sync
-
-- Flash the u-boot-dtb.img image into the micro SD card:
-
-sudo dd if=u-boot-dtb.img of=/dev/mmcblk0 bs=1k seek=69; sync
-
-- Jumper settings:
-
-MMC Boot: JM3 Closed
-
-- Connect the Serial cable between the Starter Kit and the PC for the console.
-(J28 is the Linux Serial console connector)
-
-- Insert the micro SD card in the board, power it up and U-Boot messages should
-come up.
diff --git a/board/engicam/icorem6_rqs/Kconfig b/board/engicam/icorem6_rqs/Kconfig
deleted file mode 100644
index 6dc3a07..0000000
--- a/board/engicam/icorem6_rqs/Kconfig
+++ /dev/null
@@ -1,12 +0,0 @@
-if TARGET_MX6Q_ICORE_RQS
-
-config SYS_BOARD
- default "icorem6_rqs"
-
-config SYS_VENDOR
- default "engicam"
-
-config SYS_CONFIG_NAME
- default "imx6-engicam"
-
-endif
diff --git a/board/engicam/icorem6_rqs/MAINTAINERS b/board/engicam/icorem6_rqs/MAINTAINERS
deleted file mode 100644
index 9a74265..0000000
--- a/board/engicam/icorem6_rqs/MAINTAINERS
+++ /dev/null
@@ -1,9 +0,0 @@
-ICOREM6QDL_RQS BOARD
-M: Jagan Teki <jagan@amarulasolutions.com>
-S: Maintained
-F: board/engicam/icorem6_rqs
-F: include/configs/imx6-engicam.h
-F: configs/imx6qdl_icore_rqs_defconfig
-F: arch/arm/dts/imx6qdl-icore-rqs.dtsi
-F: arch/arm/dts/imx6q-icore-rqs.dts
-F: arch/arm/dts/imx6dl-icore-rqs.dts
diff --git a/board/engicam/icorem6_rqs/Makefile b/board/engicam/icorem6_rqs/Makefile
deleted file mode 100644
index 2e3933c..0000000
--- a/board/engicam/icorem6_rqs/Makefile
+++ /dev/null
@@ -1,6 +0,0 @@
-# Copyright (C) 2016 Amarula Solutions B.V.
-#
-# SPDX-License-Identifier: GPL-2.0+
-#
-
-obj-y := icorem6_rqs.o
diff --git a/board/engicam/geam6ul/Kconfig b/board/engicam/imx6q/Kconfig
similarity index 73%
rename from board/engicam/geam6ul/Kconfig
rename to board/engicam/imx6q/Kconfig
index 7f4023e..48eb60c 100644
--- a/board/engicam/geam6ul/Kconfig
+++ b/board/engicam/imx6q/Kconfig
@@ -1,7 +1,7 @@
-if TARGET_MX6UL_GEAM
+if TARGET_MX6Q_ENGICAM
config SYS_BOARD
- default "geam6ul"
+ default "imx6q"
config SYS_VENDOR
default "engicam"
diff --git a/board/engicam/icorem6/MAINTAINERS b/board/engicam/imx6q/MAINTAINERS
similarity index 58%
rename from board/engicam/icorem6/MAINTAINERS
rename to board/engicam/imx6q/MAINTAINERS
index a348bdd..82efb46 100644
--- a/board/engicam/icorem6/MAINTAINERS
+++ b/board/engicam/imx6q/MAINTAINERS
@@ -1,10 +1,14 @@
-ICOREM6QDL BOARD
+MX6Q_ENGICAM BOARD
M: Jagan Teki <jagan@amarulasolutions.com>
S: Maintained
-F: board/engicam/icorem6
+F: board/engicam/imx6q
F: include/configs/imx6-engicam.h
F: configs/imx6qdl_icore_mmc_defconfig
F: configs/imx6qdl_icore_nand_defconfig
+F: configs/imx6qdl_icore_rqs_defconfig
F: arch/arm/dts/imx6qdl-icore.dtsi
F: arch/arm/dts/imx6q-icore.dts
F: arch/arm/dts/imx6dl-icore.dts
+F: arch/arm/dts/imx6qdl-icore-rqs.dtsi
+F: arch/arm/dts/imx6q-icore-rqs.dts
+F: arch/arm/dts/imx6dl-icore-rqs.dts
diff --git a/board/engicam/geam6ul/Makefile b/board/engicam/imx6q/Makefile
similarity index 80%
rename from board/engicam/geam6ul/Makefile
rename to board/engicam/imx6q/Makefile
index 0e367e2..ef2fb6a 100644
--- a/board/engicam/geam6ul/Makefile
+++ b/board/engicam/imx6q/Makefile
@@ -3,4 +3,4 @@
# SPDX-License-Identifier: GPL-2.0+
#
-obj-y := geam6ul.o
+obj-y := imx6q.o
diff --git a/board/engicam/icorem6_rqs/README b/board/engicam/imx6q/README
similarity index 71%
rename from board/engicam/icorem6_rqs/README
rename to board/engicam/imx6q/README
index 97e978c..3f3478c 100644
--- a/board/engicam/icorem6_rqs/README
+++ b/board/engicam/imx6q/README
@@ -1,9 +1,12 @@
-How to use U-Boot on Engicam i.CoreM6 RQS Solo/DualLite and Quad/Dual Starter Kit:
-----------------------------------------------------------------------------------
+Hsow to use U-Boot on Engicam i.CoreM6 (RQS) Solo/DualLite/Quad/Dual Starter Kit:
+--------------------------------------------------------------------------------
$ make mrproper
-- Configure U-Boot for Engicam i.CoreM6 RQS Quad/Dual/Solo/DualLite:
+- Configure U-Boot for Engicam i.CoreM6 Quad/Duali/Solo/DualLite:
+$ make imx6qdl_icore_mmc_defconfig
+
+- Configure U-Boot for Engicam i.CoreM6 RQS Quad/Duali/Solo/DualLite:
$ make imx6qdl_icore_rqs_defconfig
- Build U-Boot
diff --git a/board/engicam/icorem6/icorem6.c b/board/engicam/imx6q/imx6q.c
similarity index 97%
rename from board/engicam/icorem6/icorem6.c
rename to board/engicam/imx6q/imx6q.c
index a967ccd..bb0c866 100644
--- a/board/engicam/icorem6/icorem6.c
+++ b/board/engicam/imx6q/imx6q.c
@@ -25,13 +25,12 @@
DECLARE_GLOBAL_DATA_PTR;
#ifdef CONFIG_NAND_MXS
-
#define GPMI_PAD_CTRL0 (PAD_CTL_PKE | PAD_CTL_PUE | PAD_CTL_PUS_100K_UP)
#define GPMI_PAD_CTRL1 (PAD_CTL_DSE_40ohm | PAD_CTL_SPEED_MED | \
PAD_CTL_SRE_FAST)
#define GPMI_PAD_CTRL2 (GPMI_PAD_CTRL0 | GPMI_PAD_CTRL1)
-iomux_v3_cfg_t gpmi_pads[] = {
+static iomux_v3_cfg_t gpmi_pads[] = {
IOMUX_PADS(PAD_NANDF_CLE__NAND_CLE | MUX_PAD_CTRL(GPMI_PAD_CTRL2)),
IOMUX_PADS(PAD_NANDF_ALE__NAND_ALE | MUX_PAD_CTRL(GPMI_PAD_CTRL2)),
IOMUX_PADS(PAD_NANDF_WP_B__NAND_WP_B | MUX_PAD_CTRL(GPMI_PAD_CTRL2)),
@@ -190,3 +189,10 @@ void setup_display(void)
writel(reg, &iomux->gpr[3]);
}
#endif /* CONFIG_VIDEO_IPUV3 */
+
+#ifdef CONFIG_ENV_IS_IN_MMC
+int board_mmc_get_env_dev(int devno)
+{
+ return devno - 1;
+}
+#endif
diff --git a/board/engicam/icorem6/Kconfig b/board/engicam/imx6ul/Kconfig
similarity index 72%
rename from board/engicam/icorem6/Kconfig
rename to board/engicam/imx6ul/Kconfig
index 4a1c9ac..e91dd15 100644
--- a/board/engicam/icorem6/Kconfig
+++ b/board/engicam/imx6ul/Kconfig
@@ -1,7 +1,7 @@
-if TARGET_MX6Q_ICORE
+if TARGET_MX6UL_ENGICAM
config SYS_BOARD
- default "icorem6"
+ default "imx6ul"
config SYS_VENDOR
default "engicam"
diff --git a/board/engicam/isiotmx6ul/MAINTAINERS b/board/engicam/imx6ul/MAINTAINERS
similarity index 69%
rename from board/engicam/isiotmx6ul/MAINTAINERS
rename to board/engicam/imx6ul/MAINTAINERS
index 9b66c8d..37f84f8 100644
--- a/board/engicam/isiotmx6ul/MAINTAINERS
+++ b/board/engicam/imx6ul/MAINTAINERS
@@ -1,11 +1,14 @@
-ISIOTMX6UL BOARD
+MX6UL_ENGICAM BOARD
M: Jagan Teki <jagan@amarulasolutions.com>
S: Maintained
-F: board/engicam/isiotmx6ul
+F: board/engicam/imx6ul
F: include/configs/imx6-engicam.h
-F: configs/imx6ul_isiot_mmc_defconfig
+F: configs/imx6ul_geam_mmc_defconfig
+F: configs/imx6ul_geam_nand_defconfig
F: configs/imx6ul_isiot_emmc_defconfig
+F: configs/imx6ul_isiot_mmc_defconfig
F: configs/imx6ul_isiot_nand_defconfig
+F: arch/arm/dts/imx6ul-geam-kit.dts
F: arch/arm/dts/imx6ul-isiot.dtsi
F: arch/arm/dts/imx6ul-isiot-mmc.dts
F: arch/arm/dts/imx6ul-isiot-emmc.dts
diff --git a/board/engicam/icorem6/Makefile b/board/engicam/imx6ul/Makefile
similarity index 80%
rename from board/engicam/icorem6/Makefile
rename to board/engicam/imx6ul/Makefile
index 9ec9ecd..c78c7e4 100644
--- a/board/engicam/icorem6/Makefile
+++ b/board/engicam/imx6ul/Makefile
@@ -3,4 +3,4 @@
# SPDX-License-Identifier: GPL-2.0+
#
-obj-y := icorem6.o
+obj-y := imx6ul.o
diff --git a/board/engicam/icorem6/README b/board/engicam/imx6ul/README
similarity index 74%
rename from board/engicam/icorem6/README
rename to board/engicam/imx6ul/README
index 3779e96..1e85f61 100644
--- a/board/engicam/icorem6/README
+++ b/board/engicam/imx6ul/README
@@ -1,10 +1,13 @@
-How to use U-Boot on Engicam i.CoreM6 Solo/DualLite and Quad/Dual Starter Kit:
------------------------------------------------------------------------------
+Hsow to use U-Boot on Engicam GEAM6UL and Is.IoT MX6UL Starter Kit:
+-------------------------------------------------------------------
$ make mrproper
-- Configure U-Boot for Engicam i.CoreM6 Quad/Dual/Solo/DualLite:
-$ make imx6qdl_icore_mmc_defconfig
+- Configure U-Boot for Engicam GEAM6UL:
+$ make imx6ul_geam_mmc_defconfig
+
+- Configure U-Boot for Engicam Is.IoT MX6UL:
+$ make imx6ul_isiot_mmc_defconfig
- Build U-Boot
$ make
diff --git a/board/engicam/geam6ul/geam6ul.c b/board/engicam/imx6ul/imx6ul.c
similarity index 95%
rename from board/engicam/geam6ul/geam6ul.c
rename to board/engicam/imx6ul/imx6ul.c
index 23e7e4b..a903a36 100644
--- a/board/engicam/geam6ul/geam6ul.c
+++ b/board/engicam/imx6ul/imx6ul.c
@@ -7,6 +7,7 @@
*/
#include <common.h>
+#include <mmc.h>
#include <asm/io.h>
#include <asm/gpio.h>
@@ -88,3 +89,11 @@ void setup_gpmi_nand(void)
setbits_le32(&mxc_ccm->CCGR0, MXC_CCM_CCGR0_APBHDMA_MASK);
}
#endif /* CONFIG_NAND_MXS */
+
+#ifdef CONFIG_ENV_IS_IN_MMC
+int board_mmc_get_env_dev(int devno)
+{
+ /* dev 0 for SD/eSD, dev 1 for MMC/eMMC */
+ return (devno == 0) ? 0 : 1;
+}
+#endif
diff --git a/board/engicam/isiotmx6ul/Kconfig b/board/engicam/isiotmx6ul/Kconfig
deleted file mode 100644
index 10c2c50..0000000
--- a/board/engicam/isiotmx6ul/Kconfig
+++ /dev/null
@@ -1,12 +0,0 @@
-if TARGET_MX6UL_ISIOT
-
-config SYS_BOARD
- default "isiotmx6ul"
-
-config SYS_VENDOR
- default "engicam"
-
-config SYS_CONFIG_NAME
- default "imx6-engicam"
-
-endif
diff --git a/board/engicam/isiotmx6ul/Makefile b/board/engicam/isiotmx6ul/Makefile
deleted file mode 100644
index f4f8c78..0000000
--- a/board/engicam/isiotmx6ul/Makefile
+++ /dev/null
@@ -1,6 +0,0 @@
-# Copyright (C) 2016 Amarula Solutions B.V.
-#
-# SPDX-License-Identifier: GPL-2.0+
-#
-
-obj-y := isiotmx6ul.o
diff --git a/board/engicam/isiotmx6ul/README b/board/engicam/isiotmx6ul/README
deleted file mode 100644
index 1d177ac..0000000
--- a/board/engicam/isiotmx6ul/README
+++ /dev/null
@@ -1,28 +0,0 @@
-How to use U-Boot on Engicam Is.IoT MX6UL Starter Kit:
------------------------------------------------------
-
-- Configure U-Boot for Engicam Is.IoT MX6UL
-
-$ make mrproper
-$ make imx6ul_isiot_mmc_defconfig
-$ make
-
-This will generate the SPL image called SPL and the u-boot-dtb.img.
-
-- Flash the SPL image into the micro SD card:
-
-sudo dd if=SPL of=/dev/mmcblk0 bs=1k seek=1; sync
-
-- Flash the u-boot-dtb.img image into the micro SD card:
-
-sudo dd if=u-boot-dtb.img of=/dev/mmcblk0 bs=1k seek=69; sync
-
-- Jumper settings:
-
-MMC Boot: JM3 Closed
-
-- Connect the Serial cable between the Starter Kit and the PC for the console.
-(J28 is the Linux Serial console connector)
-
-- Insert the micro SD card in the board, power it up and U-Boot messages should
-come up.
diff --git a/board/engicam/isiotmx6ul/isiotmx6ul.c b/board/engicam/isiotmx6ul/isiotmx6ul.c
deleted file mode 100644
index 05d23c2..0000000
--- a/board/engicam/isiotmx6ul/isiotmx6ul.c
+++ /dev/null
@@ -1,129 +0,0 @@
-/*
- * Copyright (C) 2016 Amarula Solutions B.V.
- * Copyright (C) 2016 Engicam S.r.l.
- * Author: Jagan Teki <jagan@amarulasolutions.com>
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <common.h>
-#include <mmc.h>
-
-#include <asm/io.h>
-#include <asm/gpio.h>
-#include <linux/sizes.h>
-
-#include <asm/arch/clock.h>
-#include <asm/arch/crm_regs.h>
-#include <asm/arch/iomux.h>
-#include <asm/arch/mx6-pins.h>
-#include <asm/arch/sys_proto.h>
-#include <asm/mach-imx/iomux-v3.h>
-
-#include "../common/board.h"
-
-DECLARE_GLOBAL_DATA_PTR;
-
-#ifdef CONFIG_NAND_MXS
-
-#define GPMI_PAD_CTRL0 (PAD_CTL_PKE | PAD_CTL_PUE | PAD_CTL_PUS_100K_UP)
-#define GPMI_PAD_CTRL1 (PAD_CTL_DSE_40ohm | PAD_CTL_SPEED_MED | \
- PAD_CTL_SRE_FAST)
-#define GPMI_PAD_CTRL2 (GPMI_PAD_CTRL0 | GPMI_PAD_CTRL1)
-
-static iomux_v3_cfg_t const nand_pads[] = {
- IOMUX_PADS(PAD_NAND_DATA00__RAWNAND_DATA00 | MUX_PAD_CTRL(GPMI_PAD_CTRL2)),
- IOMUX_PADS(PAD_NAND_DATA01__RAWNAND_DATA01 | MUX_PAD_CTRL(GPMI_PAD_CTRL2)),
- IOMUX_PADS(PAD_NAND_DATA02__RAWNAND_DATA02 | MUX_PAD_CTRL(GPMI_PAD_CTRL2)),
- IOMUX_PADS(PAD_NAND_DATA03__RAWNAND_DATA03 | MUX_PAD_CTRL(GPMI_PAD_CTRL2)),
- IOMUX_PADS(PAD_NAND_DATA04__RAWNAND_DATA04 | MUX_PAD_CTRL(GPMI_PAD_CTRL2)),
- IOMUX_PADS(PAD_NAND_DATA05__RAWNAND_DATA05 | MUX_PAD_CTRL(GPMI_PAD_CTRL2)),
- IOMUX_PADS(PAD_NAND_DATA06__RAWNAND_DATA06 | MUX_PAD_CTRL(GPMI_PAD_CTRL2)),
- IOMUX_PADS(PAD_NAND_DATA07__RAWNAND_DATA07 | MUX_PAD_CTRL(GPMI_PAD_CTRL2)),
- IOMUX_PADS(PAD_NAND_CLE__RAWNAND_CLE | MUX_PAD_CTRL(GPMI_PAD_CTRL2)),
- IOMUX_PADS(PAD_NAND_ALE__RAWNAND_ALE | MUX_PAD_CTRL(GPMI_PAD_CTRL2)),
- IOMUX_PADS(PAD_NAND_CE0_B__RAWNAND_CE0_B | MUX_PAD_CTRL(GPMI_PAD_CTRL2)),
- IOMUX_PADS(PAD_NAND_RE_B__RAWNAND_RE_B | MUX_PAD_CTRL(GPMI_PAD_CTRL2)),
- IOMUX_PADS(PAD_NAND_WE_B__RAWNAND_WE_B | MUX_PAD_CTRL(GPMI_PAD_CTRL2)),
- IOMUX_PADS(PAD_NAND_WP_B__RAWNAND_WP_B | MUX_PAD_CTRL(GPMI_PAD_CTRL2)),
- IOMUX_PADS(PAD_NAND_READY_B__RAWNAND_READY_B | MUX_PAD_CTRL(GPMI_PAD_CTRL2)),
-};
-
-void setup_gpmi_nand(void)
-{
- struct mxc_ccm_reg *mxc_ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR;
-
- /* config gpmi nand iomux */
- SETUP_IOMUX_PADS(nand_pads);
-
- clrbits_le32(&mxc_ccm->CCGR4,
- MXC_CCM_CCGR4_RAWNAND_U_BCH_INPUT_APB_MASK |
- MXC_CCM_CCGR4_RAWNAND_U_GPMI_BCH_INPUT_BCH_MASK |
- MXC_CCM_CCGR4_RAWNAND_U_GPMI_BCH_INPUT_GPMI_IO_MASK |
- MXC_CCM_CCGR4_RAWNAND_U_GPMI_INPUT_APB_MASK |
- MXC_CCM_CCGR4_PL301_MX6QPER1_BCH_MASK);
-
- /*
- * config gpmi and bch clock to 100 MHz
- * bch/gpmi select PLL2 PFD2 400M
- * 100M = 400M / 4
- */
- clrbits_le32(&mxc_ccm->cscmr1,
- MXC_CCM_CSCMR1_BCH_CLK_SEL |
- MXC_CCM_CSCMR1_GPMI_CLK_SEL);
- clrsetbits_le32(&mxc_ccm->cscdr1,
- MXC_CCM_CSCDR1_BCH_PODF_MASK |
- MXC_CCM_CSCDR1_GPMI_PODF_MASK,
- (3 << MXC_CCM_CSCDR1_BCH_PODF_OFFSET) |
- (3 << MXC_CCM_CSCDR1_GPMI_PODF_OFFSET));
-
- /* enable gpmi and bch clock gating */
- setbits_le32(&mxc_ccm->CCGR4,
- MXC_CCM_CCGR4_RAWNAND_U_BCH_INPUT_APB_MASK |
- MXC_CCM_CCGR4_RAWNAND_U_GPMI_BCH_INPUT_BCH_MASK |
- MXC_CCM_CCGR4_RAWNAND_U_GPMI_BCH_INPUT_GPMI_IO_MASK |
- MXC_CCM_CCGR4_RAWNAND_U_GPMI_INPUT_APB_MASK |
- MXC_CCM_CCGR4_PL301_MX6QPER1_BCH_MASK);
-
- /* enable apbh clock gating */
- setbits_le32(&mxc_ccm->CCGR0, MXC_CCM_CCGR0_APBHDMA_MASK);
-}
-#endif /* CONFIG_NAND_MXS */
-
-#ifdef CONFIG_ENV_IS_IN_MMC
-int board_mmc_get_env_dev(int devno)
-{
- /* dev 0 for SD/eSD, dev 1 for MMC/eMMC */
- return (devno == 0) ? 0 : 1;
-}
-#endif
-
-#ifdef CONFIG_SPL_BUILD
-#include <spl.h>
-
-#ifdef CONFIG_ENV_IS_IN_MMC
-void board_boot_order(u32 *spl_boot_list)
-{
- u32 bmode = imx6_src_get_boot_mode();
- u8 boot_dev = BOOT_DEVICE_MMC1;
-
- switch ((bmode & IMX6_BMODE_MASK) >> IMX6_BMODE_SHIFT) {
- case IMX6_BMODE_SD:
- case IMX6_BMODE_ESD:
- /* SD/eSD - BOOT_DEVICE_MMC1 */
- break;
- case IMX6_BMODE_MMC:
- case IMX6_BMODE_EMMC:
- /* MMC/eMMC */
- boot_dev = BOOT_DEVICE_MMC2;
- break;
- default:
- /* Default - BOOT_DEVICE_MMC1 */
- printf("Wrong board boot order\n");
- break;
- }
-
- spl_boot_list[0] = boot_dev;
-}
-#endif
-#endif /* CONFIG_SPL_BUILD */
diff --git a/configs/imx6qdl_icore_mmc_defconfig b/configs/imx6qdl_icore_mmc_defconfig
index 31cf1e6..256ccb9 100644
--- a/configs/imx6qdl_icore_mmc_defconfig
+++ b/configs/imx6qdl_icore_mmc_defconfig
@@ -3,7 +3,7 @@ CONFIG_ARCH_MX6=y
CONFIG_SPL_GPIO_SUPPORT=y
CONFIG_SPL_LIBCOMMON_SUPPORT=y
CONFIG_SPL_LIBGENERIC_SUPPORT=y
-CONFIG_TARGET_MX6Q_ICORE=y
+CONFIG_TARGET_MX6Q_ENGICAM=y
CONFIG_SPL_SERIAL_SUPPORT=y
CONFIG_SPL_LIBDISK_SUPPORT=y
CONFIG_SPL_WATCHDOG_SUPPORT=y
diff --git a/configs/imx6qdl_icore_nand_defconfig b/configs/imx6qdl_icore_nand_defconfig
index ab8b6d2..21cfb85 100644
--- a/configs/imx6qdl_icore_nand_defconfig
+++ b/configs/imx6qdl_icore_nand_defconfig
@@ -3,7 +3,7 @@ CONFIG_ARCH_MX6=y
CONFIG_SPL_GPIO_SUPPORT=y
CONFIG_SPL_LIBCOMMON_SUPPORT=y
CONFIG_SPL_LIBGENERIC_SUPPORT=y
-CONFIG_TARGET_MX6Q_ICORE=y
+CONFIG_TARGET_MX6Q_ENGICAM=y
CONFIG_SPL_SERIAL_SUPPORT=y
CONFIG_SPL_WATCHDOG_SUPPORT=y
# CONFIG_CMD_BMODE is not set
diff --git a/configs/imx6qdl_icore_rqs_defconfig b/configs/imx6qdl_icore_rqs_defconfig
index 1e57deb..6cf9852 100644
--- a/configs/imx6qdl_icore_rqs_defconfig
+++ b/configs/imx6qdl_icore_rqs_defconfig
@@ -3,7 +3,7 @@ CONFIG_ARCH_MX6=y
CONFIG_SPL_GPIO_SUPPORT=y
CONFIG_SPL_LIBCOMMON_SUPPORT=y
CONFIG_SPL_LIBGENERIC_SUPPORT=y
-CONFIG_TARGET_MX6Q_ICORE_RQS=y
+CONFIG_TARGET_MX6Q_ENGICAM=y
CONFIG_SPL_SERIAL_SUPPORT=y
CONFIG_SPL_LIBDISK_SUPPORT=y
CONFIG_SPL_WATCHDOG_SUPPORT=y
diff --git a/configs/imx6ul_geam_mmc_defconfig b/configs/imx6ul_geam_mmc_defconfig
index c147d4a..b2ac4a2 100644
--- a/configs/imx6ul_geam_mmc_defconfig
+++ b/configs/imx6ul_geam_mmc_defconfig
@@ -3,7 +3,7 @@ CONFIG_ARCH_MX6=y
CONFIG_SPL_GPIO_SUPPORT=y
CONFIG_SPL_LIBCOMMON_SUPPORT=y
CONFIG_SPL_LIBGENERIC_SUPPORT=y
-CONFIG_TARGET_MX6UL_GEAM=y
+CONFIG_TARGET_MX6UL_ENGICAM=y
CONFIG_SPL_SERIAL_SUPPORT=y
CONFIG_SPL_LIBDISK_SUPPORT=y
CONFIG_SPL_WATCHDOG_SUPPORT=y
diff --git a/configs/imx6ul_geam_nand_defconfig b/configs/imx6ul_geam_nand_defconfig
index 4e51892..d920af7 100644
--- a/configs/imx6ul_geam_nand_defconfig
+++ b/configs/imx6ul_geam_nand_defconfig
@@ -3,7 +3,7 @@ CONFIG_ARCH_MX6=y
CONFIG_SPL_GPIO_SUPPORT=y
CONFIG_SPL_LIBCOMMON_SUPPORT=y
CONFIG_SPL_LIBGENERIC_SUPPORT=y
-CONFIG_TARGET_MX6UL_GEAM=y
+CONFIG_TARGET_MX6UL_ENGICAM=y
CONFIG_SPL_SERIAL_SUPPORT=y
CONFIG_SPL_WATCHDOG_SUPPORT=y
# CONFIG_CMD_BMODE is not set
diff --git a/configs/imx6ul_isiot_emmc_defconfig b/configs/imx6ul_isiot_emmc_defconfig
index 5f8a574..72ae08e 100644
--- a/configs/imx6ul_isiot_emmc_defconfig
+++ b/configs/imx6ul_isiot_emmc_defconfig
@@ -3,7 +3,7 @@ CONFIG_ARCH_MX6=y
CONFIG_SPL_GPIO_SUPPORT=y
CONFIG_SPL_LIBCOMMON_SUPPORT=y
CONFIG_SPL_LIBGENERIC_SUPPORT=y
-CONFIG_TARGET_MX6UL_ISIOT=y
+CONFIG_TARGET_MX6UL_ENGICAM=y
CONFIG_SPL_SERIAL_SUPPORT=y
CONFIG_SPL_LIBDISK_SUPPORT=y
CONFIG_SPL_WATCHDOG_SUPPORT=y
diff --git a/configs/imx6ul_isiot_mmc_defconfig b/configs/imx6ul_isiot_mmc_defconfig
index 367dfa1..ffd12bf 100644
--- a/configs/imx6ul_isiot_mmc_defconfig
+++ b/configs/imx6ul_isiot_mmc_defconfig
@@ -3,7 +3,7 @@ CONFIG_ARCH_MX6=y
CONFIG_SPL_GPIO_SUPPORT=y
CONFIG_SPL_LIBCOMMON_SUPPORT=y
CONFIG_SPL_LIBGENERIC_SUPPORT=y
-CONFIG_TARGET_MX6UL_ISIOT=y
+CONFIG_TARGET_MX6UL_ENGICAM=y
CONFIG_SPL_SERIAL_SUPPORT=y
CONFIG_SPL_LIBDISK_SUPPORT=y
CONFIG_SPL_WATCHDOG_SUPPORT=y
diff --git a/configs/imx6ul_isiot_nand_defconfig b/configs/imx6ul_isiot_nand_defconfig
index dde1cc2..aaaf9e6 100644
--- a/configs/imx6ul_isiot_nand_defconfig
+++ b/configs/imx6ul_isiot_nand_defconfig
@@ -3,7 +3,7 @@ CONFIG_ARCH_MX6=y
CONFIG_SPL_GPIO_SUPPORT=y
CONFIG_SPL_LIBCOMMON_SUPPORT=y
CONFIG_SPL_LIBGENERIC_SUPPORT=y
-CONFIG_TARGET_MX6UL_ISIOT=y
+CONFIG_TARGET_MX6UL_ENGICAM=y
CONFIG_SPL_SERIAL_SUPPORT=y
CONFIG_SPL_WATCHDOG_SUPPORT=y
# CONFIG_CMD_BMODE is not set
--
2.7.4
^ permalink raw reply related [flat|nested] 11+ messages in thread* [U-Boot] [PATCH v3 8/9] engicam: imx6q: Return mmc dev 0 for icore
2017-11-20 18:32 [U-Boot] [PATCH v3 0/9] i.MX6: engicam: Add SPL_OF_CONTROL support Jagan Teki
` (6 preceding siblings ...)
2017-11-20 18:32 ` [U-Boot] [PATCH v3 7/9] i.MX6: engicam: Add imx6q/imx6ul boards for existing boards Jagan Teki
@ 2017-11-20 18:32 ` Jagan Teki
2017-11-20 18:32 ` [U-Boot] [PATCH v3 9/9] configs: icore-rqs: Enable falcon mode Jagan Teki
2017-11-27 9:53 ` [U-Boot] [PATCH v3 0/9] i.MX6: engicam: Add SPL_OF_CONTROL support Stefano Babic
9 siblings, 0 replies; 11+ messages in thread
From: Jagan Teki @ 2017-11-20 18:32 UTC (permalink / raw)
To: u-boot
icorem6 has sd on usdhci1 which is devno 0 so return proper
devno from board_mmc_get_env_dev for icorem6 and icorem_6rqs
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
---
board/engicam/imx6q/imx6q.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/board/engicam/imx6q/imx6q.c b/board/engicam/imx6q/imx6q.c
index bb0c866..fe37088 100644
--- a/board/engicam/imx6q/imx6q.c
+++ b/board/engicam/imx6q/imx6q.c
@@ -193,6 +193,7 @@ void setup_display(void)
#ifdef CONFIG_ENV_IS_IN_MMC
int board_mmc_get_env_dev(int devno)
{
- return devno - 1;
+ /* i.CoreM6 RQS has USDHC3 for SD and USDHC4 for eMMC */
+ return (devno == 0) ? 0: (devno - 1);
}
#endif
--
2.7.4
^ permalink raw reply related [flat|nested] 11+ messages in thread* [U-Boot] [PATCH v3 9/9] configs: icore-rqs: Enable falcon mode
2017-11-20 18:32 [U-Boot] [PATCH v3 0/9] i.MX6: engicam: Add SPL_OF_CONTROL support Jagan Teki
` (7 preceding siblings ...)
2017-11-20 18:32 ` [U-Boot] [PATCH v3 8/9] engicam: imx6q: Return mmc dev 0 for icore Jagan Teki
@ 2017-11-20 18:32 ` Jagan Teki
2017-11-27 9:53 ` [U-Boot] [PATCH v3 0/9] i.MX6: engicam: Add SPL_OF_CONTROL support Stefano Babic
9 siblings, 0 replies; 11+ messages in thread
From: Jagan Teki @ 2017-11-20 18:32 UTC (permalink / raw)
To: u-boot
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
---
configs/imx6qdl_icore_rqs_defconfig | 1 +
1 file changed, 1 insertion(+)
diff --git a/configs/imx6qdl_icore_rqs_defconfig b/configs/imx6qdl_icore_rqs_defconfig
index 6cf9852..aaf9646 100644
--- a/configs/imx6qdl_icore_rqs_defconfig
+++ b/configs/imx6qdl_icore_rqs_defconfig
@@ -16,6 +16,7 @@ CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/mach-imx/spl_sd.cfg"
CONFIG_BOOTDELAY=3
CONFIG_SPL=y
CONFIG_SPL_EXT_SUPPORT=y
+CONFIG_SPL_OS_BOOT=y
CONFIG_HUSH_PARSER=y
CONFIG_SYS_PROMPT="icorem6qdl-rqs> "
CONFIG_CRC32_VERIFY=y
--
2.7.4
^ permalink raw reply related [flat|nested] 11+ messages in thread* [U-Boot] [PATCH v3 0/9] i.MX6: engicam: Add SPL_OF_CONTROL support
2017-11-20 18:32 [U-Boot] [PATCH v3 0/9] i.MX6: engicam: Add SPL_OF_CONTROL support Jagan Teki
` (8 preceding siblings ...)
2017-11-20 18:32 ` [U-Boot] [PATCH v3 9/9] configs: icore-rqs: Enable falcon mode Jagan Teki
@ 2017-11-27 9:53 ` Stefano Babic
9 siblings, 0 replies; 11+ messages in thread
From: Stefano Babic @ 2017-11-27 9:53 UTC (permalink / raw)
To: u-boot
On 20/11/2017 19:32, Jagan Teki wrote:
> This series has fix for data abort[1] which is observed for pinctrl data
> before reloaction, thanks Lokesh for the suggestions.
>
> Changes for v3:
> - Add pinctrl data fix for 'data abort' issue
> - Add proper mmc get env device support for imx6q boards
> - Enabled falcon for icorem6_rqs
Applied (whole series) to u-boot-imx, thanks !
Best regards,
Stefano Babic
>
> Changes for v2:
> - Fixed imx6ul build issue
> - Add FDT support for mx6ul_14x14_evk
>
> [1] https://www.mail-archive.com/u-boot at lists.denx.de/msg267220.html
>
> Jagan Teki (9):
> i.MX6: engicam: Move set_fdt_file to common
> i.MX6Q: icorem6: Move spl load fit to common/spl
> i.MX6Q: icore: Add SPL_OF_CONTROL support
> pinctrl: imx6ul: Fix pinctrl data overlapped with DT area
> i.MX6UL: icore: Add SPL_OF_CONTROL support
> board: icore-rqs: Fix mmc get env device
> i.MX6: engicam: Add imx6q/imx6ul boards for existing boards
> engicam: imx6q: Return mmc dev 0 for icore
> configs: icore-rqs: Enable falcon mode
>
> arch/arm/dts/imx6qdl-icore-rqs.dtsi | 7 +
> arch/arm/dts/imx6qdl-icore.dtsi | 2 +
> arch/arm/dts/imx6qdl.dtsi | 5 +
> arch/arm/dts/imx6ul-geam-kit.dts | 4 +
> arch/arm/dts/imx6ul-isiot-emmc.dts | 2 +
> arch/arm/dts/imx6ul-isiot.dtsi | 2 +
> arch/arm/dts/imx6ul.dtsi | 6 +
> arch/arm/mach-imx/mx6/Kconfig | 49 ++---
> board/engicam/common/board.c | 24 ++
> board/engicam/common/board.h | 1 -
> board/engicam/common/spl.c | 42 ++++
> board/engicam/geam6ul/MAINTAINERS | 8 -
> board/engicam/geam6ul/README | 28 ---
> board/engicam/icorem6_rqs/Kconfig | 12 -
> board/engicam/icorem6_rqs/MAINTAINERS | 9 -
> board/engicam/icorem6_rqs/Makefile | 6 -
> board/engicam/icorem6_rqs/icorem6_rqs.c | 124 +----------
> board/engicam/{geam6ul => imx6q}/Kconfig | 4 +-
> board/engicam/{icorem6 => imx6q}/MAINTAINERS | 8 +-
> board/engicam/{geam6ul => imx6q}/Makefile | 2 +-
> board/engicam/{icorem6_rqs => imx6q}/README | 9 +-
> board/engicam/{icorem6/icorem6.c => imx6q/imx6q.c} | 98 +--------
> board/engicam/{icorem6 => imx6ul}/Kconfig | 4 +-
> board/engicam/{isiotmx6ul => imx6ul}/MAINTAINERS | 9 +-
> board/engicam/{icorem6 => imx6ul}/Makefile | 2 +-
> board/engicam/{icorem6 => imx6ul}/README | 11 +-
> .../engicam/{geam6ul/geam6ul.c => imx6ul/imx6ul.c} | 88 +-------
> board/engicam/isiotmx6ul/Kconfig | 12 -
> board/engicam/isiotmx6ul/Makefile | 6 -
> board/engicam/isiotmx6ul/README | 28 ---
> board/engicam/isiotmx6ul/isiotmx6ul.c | 241 ---------------------
> configs/imx6qdl_icore_mmc_defconfig | 3 +-
> configs/imx6qdl_icore_nand_defconfig | 2 +-
> configs/imx6qdl_icore_rqs_defconfig | 4 +-
> configs/imx6ul_geam_mmc_defconfig | 3 +-
> configs/imx6ul_geam_nand_defconfig | 2 +-
> configs/imx6ul_isiot_emmc_defconfig | 3 +-
> configs/imx6ul_isiot_mmc_defconfig | 3 +-
> configs/imx6ul_isiot_nand_defconfig | 2 +-
> drivers/pinctrl/nxp/pinctrl-imx6.c | 7 +-
> include/configs/imx6-engicam.h | 11 -
> 41 files changed, 170 insertions(+), 723 deletions(-)
> delete mode 100644 board/engicam/geam6ul/MAINTAINERS
> delete mode 100644 board/engicam/geam6ul/README
> delete mode 100644 board/engicam/icorem6_rqs/Kconfig
> delete mode 100644 board/engicam/icorem6_rqs/MAINTAINERS
> delete mode 100644 board/engicam/icorem6_rqs/Makefile
> rename board/engicam/{geam6ul => imx6q}/Kconfig (73%)
> rename board/engicam/{icorem6 => imx6q}/MAINTAINERS (58%)
> rename board/engicam/{geam6ul => imx6q}/Makefile (80%)
> rename board/engicam/{icorem6_rqs => imx6q}/README (71%)
> rename board/engicam/{icorem6/icorem6.c => imx6q/imx6q.c} (72%)
> rename board/engicam/{icorem6 => imx6ul}/Kconfig (72%)
> rename board/engicam/{isiotmx6ul => imx6ul}/MAINTAINERS (69%)
> rename board/engicam/{icorem6 => imx6ul}/Makefile (80%)
> rename board/engicam/{icorem6 => imx6ul}/README (74%)
> rename board/engicam/{geam6ul/geam6ul.c => imx6ul/imx6ul.c} (59%)
> delete mode 100644 board/engicam/isiotmx6ul/Kconfig
> delete mode 100644 board/engicam/isiotmx6ul/Makefile
> delete mode 100644 board/engicam/isiotmx6ul/README
> delete mode 100644 board/engicam/isiotmx6ul/isiotmx6ul.c
>
--
=====================================================================
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================
^ permalink raw reply [flat|nested] 11+ messages in thread