Patch "powerpc/64s: Initialize ISAv3 MMU registers before setting partition table" has been added to the 4.9-stable tree

Patch "powerpc/64s: Initialize ISAv3 MMU registers before setting partition table" has been added to the 4.9-stable tree

[gregkh]

This is a note to let you know that I've just added the patch titled

    powerpc/64s: Initialize ISAv3 MMU registers before setting partition table

to the 4.9-stable tree which can be found at:
    http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary

The filename of the patch is:
     powerpc-64s-initialize-isav3-mmu-registers-before-setting-partition-table.patch
and it can be found in the queue-4.9 subdirectory.

If you, or anyone else, feels it should not be added to the stable tree,
please let <stable@vger.kernel.org> know about it.


>From 371b80447ff33ddac392c189cf884a5a3e18faeb Mon Sep 17 00:00:00 2001
From: Nicholas Piggin <npiggin@gmail.com>
Date: Wed, 6 Dec 2017 18:21:14 +1000
Subject: powerpc/64s: Initialize ISAv3 MMU registers before setting partition table

From: Nicholas Piggin <npiggin@gmail.com>

commit 371b80447ff33ddac392c189cf884a5a3e18faeb upstream.

kexec can leave MMU registers set when booting into a new kernel,
the PIDR (Process Identification Register) in particular. The boot
sequence does not zero PIDR, so it only gets set when CPUs first
switch to a userspace processes (until then it's running a kernel
thread with effective PID = 0).

This leaves a window where a process table entry and page tables are
set up due to user processes running on other CPUs, that happen to
match with a stale PID. The CPU with that PID may cause speculative
accesses that address quadrant 0 (aka userspace addresses), which will
result in cached translations and PWC (Page Walk Cache) for that
process, on a CPU which is not in the mm_cpumask and so they will not
be invalidated properly.

The most common result is the kernel hanging in infinite page fault
loops soon after kexec (usually in schedule_tail, which is usually the
first non-speculative quadrant 0 access to a new PID) due to a stale
PWC. However being a stale translation error, it could result in
anything up to security and data corruption problems.

Fix this by zeroing out PIDR at boot and kexec.

Fixes: 7e381c0ff618 ("powerpc/mm/radix: Add mmu context handling callback for radix")
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/powerpc/kernel/cpu_setup_power.S |    2 ++
 1 file changed, 2 insertions(+)

--- a/arch/powerpc/kernel/cpu_setup_power.S
+++ b/arch/powerpc/kernel/cpu_setup_power.S
@@ -97,6 +97,7 @@ _GLOBAL(__setup_cpu_power9)
 	beqlr
 	li	r0,0
 	mtspr	SPRN_LPID,r0
+	mtspr	SPRN_PID,r0
 	mfspr	r3,SPRN_LPCR
 	LOAD_REG_IMMEDIATE(r4, LPCR_PECEDH | LPCR_PECE_HVEE | LPCR_HVICE)
 	or	r3, r3, r4
@@ -119,6 +120,7 @@ _GLOBAL(__restore_cpu_power9)
 	beqlr
 	li	r0,0
 	mtspr	SPRN_LPID,r0
+	mtspr	SPRN_PID,r0
 	mfspr   r3,SPRN_LPCR
 	LOAD_REG_IMMEDIATE(r4, LPCR_PECEDH | LPCR_PECE_HVEE | LPCR_HVICE)
 	or	r3, r3, r4


Patches currently in stable-queue which might be from npiggin@gmail.com are

queue-4.9/powerpc-64s-initialize-isav3-mmu-registers-before-setting-partition-table.patch