[Qemu-devel] [PULL 00/26] target-arm queue

[Qemu-devel] [PULL 00/26] target-arm queue

[Peter Maydell]

ARM queue, various patches accumulated over the Christmas break.

-- PMM

The following changes since commit 612061b277915fadd80631eb7a6926f48a110c44:

  Merge remote-tracking branch 'remotes/ericb/tags/pull-nbd-2018-01-10' into staging (2018-01-11 11:52:40 +0000)

are available in the git repository at:

  git://git.linaro.org/people/pmaydell/qemu-arm.git tags/pull-target-arm-20180111

for you to fetch changes up to 0cf09852015e47a5fbb974ff7ac320366afd21ee:

  hw/intc/arm_gic: reserved register addresses are RAZ/WI (2018-01-11 13:25:40 +0000)

----------------------------------------------------------------
target-arm queue:
 * add aarch64_be linux-user target
 * Virt: ACPI: fix qemu assert due to re-assigned table data address
 * imx_fec: various bug fixes and cleanups
 * hw/timer/pxa2xx_timer: replace hw_error() -> qemu_log_mask()
 * hw/sd/pxa2xx_mmci: add read/write() trace events
 * linux-user/arm/nwfpe: Check coprocessor number for FPA emulation
 * target/arm: Make disas_thumb2_insn() generate its own UNDEF exceptions
 * hw/intc/arm_gicv3: Make reserved register addresses RAZ/WI
 * hw/intc/arm_gic: reserved register addresses are RAZ/WI

----------------------------------------------------------------
Andrey Smirnov (11):
      imx_fec: Do not link to netdev
      imx_fec: Refactor imx_eth_enable_rx()
      imx_fec: Change queue flushing heuristics
      imx_fec: Move Tx frame buffer away from the stack
      imx_fec: Use ENET_FTRL to determine truncation length
      imx_fec: Use MIN instead of explicit ternary operator
      imx_fec: Emulate SHIFT16 in ENETx_RACC
      imx_fec: Add support for multiple Tx DMA rings
      imx_fec: Use correct length for packet size
      imx_fec: Fix a typo in imx_enet_receive()
      imx_fec: Reserve full FSL_IMX25_FEC_SIZE page for the register file

Michael Weiser (8):
      linux-user: Add support for big-endian aarch64
      linux-user: Add separate aarch64_be uname
      linux-user: Fix endianess of aarch64 signal trampoline
      configure: Add aarch64_be-linux-user target
      linux-user: Add aarch64_be magic numbers to qemu-binfmt-conf.sh
      linux-user: Separate binfmt arm CPU families
      linux-user: Activate armeb handler registration
      target/arm: Fix stlxp for aarch64_be

Peter Maydell (4):
      linux-user/arm/nwfpe: Check coprocessor number for FPA emulation
      target/arm: Make disas_thumb2_insn() generate its own UNDEF exceptions
      hw/intc/arm_gicv3: Make reserved register addresses RAZ/WI
      hw/intc/arm_gic: reserved register addresses are RAZ/WI

Philippe Mathieu-Daudé (2):
      hw/timer/pxa2xx_timer: replace hw_error() -> qemu_log_mask()
      hw/sd/pxa2xx_mmci: add read/write() trace events

Zhaoshenglong (1):
      Virt: ACPI: fix qemu assert due to re-assigned table data address

 configure                                 |   5 +-
 include/hw/arm/fsl-imx25.h                |   1 -
 include/hw/net/imx_fec.h                  |  27 +++-
 linux-user/aarch64/target_syscall.h       |   4 +
 hw/arm/fsl-imx6.c                         |   1 +
 hw/arm/virt-acpi-build.c                  |  18 ++-
 hw/intc/arm_gic.c                         |   5 +-
 hw/intc/arm_gicv3_dist.c                  |  13 ++
 hw/intc/arm_gicv3_its_common.c            |   8 +-
 hw/intc/arm_gicv3_redist.c                |  13 ++
 hw/net/imx_fec.c                          | 210 +++++++++++++++++++++++-------
 hw/sd/pxa2xx_mmci.c                       |  78 +++++++----
 hw/timer/pxa2xx_timer.c                   |  17 ++-
 linux-user/arm/nwfpe/fpa11.c              |   9 ++
 linux-user/main.c                         |   6 +
 linux-user/signal.c                       |  10 +-
 target/arm/helper-a64.c                   |   7 +-
 target/arm/translate.c                    |  23 ++--
 default-configs/aarch64_be-linux-user.mak |   1 +
 hw/sd/trace-events                        |   4 +
 scripts/qemu-binfmt-conf.sh               |  15 ++-
 21 files changed, 356 insertions(+), 119 deletions(-)
 create mode 100644 default-configs/aarch64_be-linux-user.mak

[Qemu-devel] [PULL 01/26] linux-user: Add support for big-endian aarch64

[Peter Maydell]

From: Michael Weiser <michael.weiser@gmx.de>

Enable big-endian mode for data accesses on aarch64 for big-endian linux
user mode. Activate it for all exception levels as documented by ARM:
Set the SCTLR EE bit for ELs 1 through 3. Additionally set bit E0E in
EL1 to enable it in EL0 as well.

Signed-off-by: Michael Weiser <michael.weiser@gmx.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20171220212308.12614-2-michael.weiser@gmx.de
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 linux-user/main.c | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/linux-user/main.c b/linux-user/main.c
index 99a551b..450eb3c 100644
--- a/linux-user/main.c
+++ b/linux-user/main.c
@@ -4629,6 +4629,12 @@ int main(int argc, char **argv, char **envp)
         }
         env->pc = regs->pc;
         env->xregs[31] = regs->sp;
+#ifdef TARGET_WORDS_BIGENDIAN
+        env->cp15.sctlr_el[1] |= SCTLR_E0E;
+        for (i = 1; i < 4; ++i) {
+            env->cp15.sctlr_el[i] |= SCTLR_EE;
+        }
+#endif
     }
 #elif defined(TARGET_ARM)
     {
-- 
2.7.4

[Qemu-devel] [PULL 02/26] linux-user: Add separate aarch64_be uname

[Peter Maydell]

From: Michael Weiser <michael.weiser@gmx.de>

Make big-endian aarch64 systems identify as aarch64_be as expected by
big-endian userland and toolchains.

Signed-off-by: Michael Weiser <michael.weiser@gmx.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-id: 20171220212308.12614-3-michael.weiser@gmx.de
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 linux-user/aarch64/target_syscall.h | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/linux-user/aarch64/target_syscall.h b/linux-user/aarch64/target_syscall.h
index 1b62953..604ab99 100644
--- a/linux-user/aarch64/target_syscall.h
+++ b/linux-user/aarch64/target_syscall.h
@@ -8,7 +8,11 @@ struct target_pt_regs {
     uint64_t        pstate;
 };
 
+#if defined(TARGET_WORDS_BIGENDIAN)
+#define UNAME_MACHINE "aarch64_be"
+#else
 #define UNAME_MACHINE "aarch64"
+#endif
 #define UNAME_MINIMUM_RELEASE "3.8.0"
 #define TARGET_CLONE_BACKWARDS
 #define TARGET_MINSIGSTKSZ       2048
-- 
2.7.4

[Qemu-devel] [PULL 03/26] linux-user: Fix endianess of aarch64 signal trampoline

[Peter Maydell]

From: Michael Weiser <michael.weiser@gmx.de>

Since for aarch64 the signal trampoline is synthesized directly into the
signal frame we need to make sure the instructions end up little-endian.
Otherwise the wrong endianness will cause a SIGILL upon return from the
signal handler on big-endian targets.

Signed-off-by: Michael Weiser <michael.weiser@gmx.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20171220212308.12614-4-michael.weiser@gmx.de
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 linux-user/signal.c | 10 +++++++---
 1 file changed, 7 insertions(+), 3 deletions(-)

diff --git a/linux-user/signal.c b/linux-user/signal.c
index 74fa03f..f85f0dd 100644
--- a/linux-user/signal.c
+++ b/linux-user/signal.c
@@ -1599,9 +1599,13 @@ static void target_setup_frame(int usig, struct target_sigaction *ka,
     if (ka->sa_flags & TARGET_SA_RESTORER) {
         return_addr = ka->sa_restorer;
     } else {
-        /* mov x8,#__NR_rt_sigreturn; svc #0 */
-        __put_user(0xd2801168, &frame->tramp[0]);
-        __put_user(0xd4000001, &frame->tramp[1]);
+        /*
+         * mov x8,#__NR_rt_sigreturn; svc #0
+         * Since these are instructions they need to be put as little-endian
+         * regardless of target default or current CPU endianness.
+         */
+        __put_user_e(0xd2801168, &frame->tramp[0], le);
+        __put_user_e(0xd4000001, &frame->tramp[1], le);
         return_addr = frame_addr + offsetof(struct target_rt_sigframe, tramp);
     }
     env->xregs[0] = usig;
-- 
2.7.4

[Qemu-devel] [PULL 04/26] configure: Add aarch64_be-linux-user target

[Peter Maydell]

From: Michael Weiser <michael.weiser@gmx.de>

Add target aarch64_be-linux-user. This allows a qemu-aarch64_be binary
to be built that will run big-endian aarch64 binaries.

Signed-off-by: Michael Weiser <michael.weiser@gmx.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-id: 20171220212308.12614-5-michael.weiser@gmx.de
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 configure                                 | 5 +++--
 default-configs/aarch64_be-linux-user.mak | 1 +
 2 files changed, 4 insertions(+), 2 deletions(-)
 create mode 100644 default-configs/aarch64_be-linux-user.mak

diff --git a/configure b/configure
index 6a04082..89bd662 100755
--- a/configure
+++ b/configure
@@ -6439,7 +6439,7 @@ target_name=$(echo $target | cut -d '-' -f 1)
 target_bigendian="no"
 
 case "$target_name" in
-  armeb|hppa|lm32|m68k|microblaze|mips|mipsn32|mips64|moxie|or1k|ppc|ppcemb|ppc64|ppc64abi32|s390x|sh4eb|sparc|sparc64|sparc32plus|xtensaeb)
+  armeb|aarch64_be|hppa|lm32|m68k|microblaze|mips|mipsn32|mips64|moxie|or1k|ppc|ppcemb|ppc64|ppc64abi32|s390x|sh4eb|sparc|sparc64|sparc32plus|xtensaeb)
   target_bigendian=yes
   ;;
 esac
@@ -6494,7 +6494,8 @@ case "$target_name" in
     mttcg="yes"
     gdb_xml_files="arm-core.xml arm-vfp.xml arm-vfp3.xml arm-neon.xml"
   ;;
-  aarch64)
+  aarch64|aarch64_be)
+    TARGET_ARCH=aarch64
     TARGET_BASE_ARCH=arm
     bflt="yes"
     mttcg="yes"
diff --git a/default-configs/aarch64_be-linux-user.mak b/default-configs/aarch64_be-linux-user.mak
new file mode 100644
index 0000000..a69d9d2
--- /dev/null
+++ b/default-configs/aarch64_be-linux-user.mak
@@ -0,0 +1 @@
+# Default configuration for aarch64_be-linux-user
-- 
2.7.4

[Qemu-devel] [PULL 05/26] linux-user: Add aarch64_be magic numbers to qemu-binfmt-conf.sh

[Peter Maydell]

From: Michael Weiser <michael.weiser@gmx.de>

As we now have a linux-user aarch64_be target, we can add it to the list
of supported targets in qemu-binfmt-conf.sh

Signed-off-by: Michael Weiser <michael.weiser@gmx.de>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-id: 20171220212308.12614-6-michael.weiser@gmx.de
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 scripts/qemu-binfmt-conf.sh | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/scripts/qemu-binfmt-conf.sh b/scripts/qemu-binfmt-conf.sh
index 8afc3eb..d699535 100755
--- a/scripts/qemu-binfmt-conf.sh
+++ b/scripts/qemu-binfmt-conf.sh
@@ -4,7 +4,7 @@
 
 qemu_target_list="i386 i486 alpha arm sparc32plus ppc ppc64 ppc64le m68k \
 mips mipsel mipsn32 mipsn32el mips64 mips64el \
-sh4 sh4eb s390x aarch64 hppa"
+sh4 sh4eb s390x aarch64 aarch64_be hppa"
 
 i386_magic='\x7fELF\x01\x01\x01\x00\x00\x00\x00\x00\x00\x00\x00\x00\x02\x00\x03\x00'
 i386_mask='\xff\xff\xff\xff\xff\xfe\xfe\xff\xff\xff\xff\xff\xff\xff\xff\xff\xfe\xff\xff\xff'
@@ -92,6 +92,10 @@ aarch64_magic='\x7fELF\x02\x01\x01\x00\x00\x00\x00\x00\x00\x00\x00\x00\x02\x00\x
 aarch64_mask='\xff\xff\xff\xff\xff\xff\xff\x00\xff\xff\xff\xff\xff\xff\xff\xff\xfe\xff\xff\xff'
 aarch64_family=arm
 
+aarch64_be_magic='\x7fELF\x02\x02\x01\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x02\x00\xb7'
+aarch64_be_mask='\xff\xff\xff\xff\xff\xff\xff\x00\xff\xff\xff\xff\xff\xff\xff\xff\xff\xfe\xff\xff'
+aarch64_be_family=arm
+
 hppa_magic='\x7f\x45\x4c\x46\x01\x02\x01\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x02\x00\x0f'
 hppa_mask='\xff\xff\xff\xff\xff\xff\xff\x00\xff\xff\xff\xff\xff\xff\xff\xff\xff\xfe\xff\xff'
 hppa_family=hppa
-- 
2.7.4

[Qemu-devel] [PULL 06/26] linux-user: Separate binfmt arm CPU families

[Peter Maydell]

From: Michael Weiser <michael.weiser@gmx.de>

Give big-endian arm and aarch64 CPUs their own family in
qemu-binfmt-conf.sh to make sure we register qemu-user for binaries of
the opposite endianness on arm and aarch64. Apart from the family
assignments of the magic values, qemu_get_family() needs to be able to
distinguish the two and recognise aarch64{,_be} as well.

Signed-off-by: Michael Weiser <michael.weiser@gmx.de>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-id: 20171220212308.12614-7-michael.weiser@gmx.de
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 scripts/qemu-binfmt-conf.sh | 9 ++++++---
 1 file changed, 6 insertions(+), 3 deletions(-)

diff --git a/scripts/qemu-binfmt-conf.sh b/scripts/qemu-binfmt-conf.sh
index d699535..597efdb 100755
--- a/scripts/qemu-binfmt-conf.sh
+++ b/scripts/qemu-binfmt-conf.sh
@@ -24,7 +24,7 @@ arm_family=arm
 
 armeb_magic='\x7fELF\x01\x02\x01\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x02\x00\x28'
 armeb_mask='\xff\xff\xff\xff\xff\xff\xff\x00\xff\xff\xff\xff\xff\xff\xff\xff\xff\xfe\xff\xff'
-armeb_family=arm
+armeb_family=armeb
 
 sparc_magic='\x7fELF\x01\x02\x01\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x02\x00\x02'
 sparc_mask='\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xfe\xff\xff'
@@ -94,7 +94,7 @@ aarch64_family=arm
 
 aarch64_be_magic='\x7fELF\x02\x02\x01\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x02\x00\xb7'
 aarch64_be_mask='\xff\xff\xff\xff\xff\xff\xff\x00\xff\xff\xff\xff\xff\xff\xff\xff\xff\xfe\xff\xff'
-aarch64_be_family=arm
+aarch64_be_family=armeb
 
 hppa_magic='\x7f\x45\x4c\x46\x01\x02\x01\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x02\x00\x0f'
 hppa_mask='\xff\xff\xff\xff\xff\xff\xff\x00\xff\xff\xff\xff\xff\xff\xff\xff\xff\xfe\xff\xff'
@@ -115,9 +115,12 @@ qemu_get_family() {
     ppc64el|ppc64le)
         echo "ppcle"
         ;;
-    arm|armel|armhf|arm64|armv[4-9]*)
+    arm|armel|armhf|arm64|armv[4-9]*l|aarch64)
         echo "arm"
         ;;
+    armeb|armv[4-9]*b|aarch64_be)
+        echo "armeb"
+        ;;
     sparc*)
         echo "sparc"
         ;;
-- 
2.7.4

[Qemu-devel] [PULL 07/26] linux-user: Activate armeb handler registration

[Peter Maydell]

From: Michael Weiser <michael.weiser@gmx.de>

armeb is missing from the target list in qemu-binfmt-conf.sh. Add it so
the handler for those binaries gets registered by the script.

Signed-off-by: Michael Weiser <michael.weiser@gmx.de>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-id: 20171220212308.12614-8-michael.weiser@gmx.de
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 scripts/qemu-binfmt-conf.sh | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/scripts/qemu-binfmt-conf.sh b/scripts/qemu-binfmt-conf.sh
index 597efdb..ea5a748 100755
--- a/scripts/qemu-binfmt-conf.sh
+++ b/scripts/qemu-binfmt-conf.sh
@@ -2,7 +2,7 @@
 # enable automatic i386/ARM/M68K/MIPS/SPARC/PPC/s390/HPPA
 # program execution by the kernel
 
-qemu_target_list="i386 i486 alpha arm sparc32plus ppc ppc64 ppc64le m68k \
+qemu_target_list="i386 i486 alpha arm armeb sparc32plus ppc ppc64 ppc64le m68k \
 mips mipsel mipsn32 mipsn32el mips64 mips64el \
 sh4 sh4eb s390x aarch64 aarch64_be hppa"
 
-- 
2.7.4

[Qemu-devel] [PULL 08/26] target/arm: Fix stlxp for aarch64_be

[Peter Maydell]

From: Michael Weiser <michael.weiser@gmx.de>

ldxp loads two consecutive doublewords from memory regardless of CPU
endianness. On store, stlxp currently assumes to work with a 128bit
value and consequently switches order in big-endian mode. With this
change it packs the doublewords in reverse order in anticipation of the
128bit big-endian store operation interposing them so they end up in
memory in the right order. This makes it work for both MTTCG and !MTTCG.
It effectively implements the ARM ARM STLXP operation pseudo-code:

data = if BigEndian() then el1:el2 else el2:el1;

With this change an aarch64_be Linux 4.14.4 kernel succeeds to boot up
in system emulation mode.

Signed-off-by: Michael Weiser <michael.weiser@gmx.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target/arm/helper-a64.c | 7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)

diff --git a/target/arm/helper-a64.c b/target/arm/helper-a64.c
index b84ebca..3e00a9e 100644
--- a/target/arm/helper-a64.c
+++ b/target/arm/helper-a64.c
@@ -506,8 +506,11 @@ static uint64_t do_paired_cmpxchg64_be(CPUARMState *env, uint64_t addr,
     Int128 oldv, cmpv, newv;
     bool success;
 
-    cmpv = int128_make128(env->exclusive_val, env->exclusive_high);
-    newv = int128_make128(new_lo, new_hi);
+    /* high and low need to be switched here because this is not actually a
+     * 128bit store but two doublewords stored consecutively
+     */
+    cmpv = int128_make128(env->exclusive_high, env->exclusive_val);
+    newv = int128_make128(new_hi, new_lo);
 
     if (parallel) {
 #ifndef CONFIG_ATOMIC128
-- 
2.7.4

[Qemu-devel] [PULL 09/26] Virt: ACPI: fix qemu assert due to re-assigned table data address

[Peter Maydell]

From: Zhaoshenglong <zhaoshenglong@huawei.com>

acpi_data_push uses g_array_set_size to resize the memory size. If there
is no enough contiguous memory, the address will be changed. If we use
the old value, it will assert.
qemu-kvm: hw/acpi/bios-linker-loader.c:214: bios_linker_loader_add_checksum:
Assertion `start_offset < file->blob->len' failed.`

This issue only happens in building SRAT table now but here we unify the
pattern for other tables as well to avoid possible issues in the future.

Signed-off-by: Zhaoshenglong <zhaoshenglong@huawei.com>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 hw/arm/virt-acpi-build.c | 18 +++++++++++-------
 1 file changed, 11 insertions(+), 7 deletions(-)

diff --git a/hw/arm/virt-acpi-build.c b/hw/arm/virt-acpi-build.c
index 3d78ff6..f7fa795 100644
--- a/hw/arm/virt-acpi-build.c
+++ b/hw/arm/virt-acpi-build.c
@@ -453,6 +453,7 @@ build_spcr(GArray *table_data, BIOSLinker *linker, VirtMachineState *vms)
     AcpiSerialPortConsoleRedirection *spcr;
     const MemMapEntry *uart_memmap = &vms->memmap[VIRT_UART];
     int irq = vms->irqmap[VIRT_UART] + ARM_SPI_BASE;
+    int spcr_start = table_data->len;
 
     spcr = acpi_data_push(table_data, sizeof(*spcr));
 
@@ -476,8 +477,8 @@ build_spcr(GArray *table_data, BIOSLinker *linker, VirtMachineState *vms)
     spcr->pci_device_id = 0xffff;  /* PCI Device ID: not a PCI device */
     spcr->pci_vendor_id = 0xffff;  /* PCI Vendor ID: not a PCI device */
 
-    build_header(linker, table_data, (void *)spcr, "SPCR", sizeof(*spcr), 2,
-                 NULL, NULL);
+    build_header(linker, table_data, (void *)(table_data->data + spcr_start),
+                 "SPCR", table_data->len - spcr_start, 2, NULL, NULL);
 }
 
 static void
@@ -512,8 +513,8 @@ build_srat(GArray *table_data, BIOSLinker *linker, VirtMachineState *vms)
         mem_base += numa_info[i].node_mem;
     }
 
-    build_header(linker, table_data, (void *)srat, "SRAT",
-                 table_data->len - srat_start, 3, NULL, NULL);
+    build_header(linker, table_data, (void *)(table_data->data + srat_start),
+                 "SRAT", table_data->len - srat_start, 3, NULL, NULL);
 }
 
 static void
@@ -522,6 +523,7 @@ build_mcfg(GArray *table_data, BIOSLinker *linker, VirtMachineState *vms)
     AcpiTableMcfg *mcfg;
     const MemMapEntry *memmap = vms->memmap;
     int len = sizeof(*mcfg) + sizeof(mcfg->allocation[0]);
+    int mcfg_start = table_data->len;
 
     mcfg = acpi_data_push(table_data, len);
     mcfg->allocation[0].address = cpu_to_le64(memmap[VIRT_PCIE_ECAM].base);
@@ -532,7 +534,8 @@ build_mcfg(GArray *table_data, BIOSLinker *linker, VirtMachineState *vms)
     mcfg->allocation[0].end_bus_number = (memmap[VIRT_PCIE_ECAM].size
                                           / PCIE_MMCFG_SIZE_MIN) - 1;
 
-    build_header(linker, table_data, (void *)mcfg, "MCFG", len, 1, NULL, NULL);
+    build_header(linker, table_data, (void *)(table_data->data + mcfg_start),
+                 "MCFG", table_data->len - mcfg_start, 1, NULL, NULL);
 }
 
 /* GTDT */
@@ -651,6 +654,7 @@ build_madt(GArray *table_data, BIOSLinker *linker, VirtMachineState *vms)
 static void build_fadt(GArray *table_data, BIOSLinker *linker,
                        VirtMachineState *vms, unsigned dsdt_tbl_offset)
 {
+    int fadt_start = table_data->len;
     AcpiFadtDescriptorRev5_1 *fadt = acpi_data_push(table_data, sizeof(*fadt));
     unsigned xdsdt_entry_offset = (char *)&fadt->x_dsdt - table_data->data;
     uint16_t bootflags;
@@ -681,8 +685,8 @@ static void build_fadt(GArray *table_data, BIOSLinker *linker,
         ACPI_BUILD_TABLE_FILE, xdsdt_entry_offset, sizeof(fadt->x_dsdt),
         ACPI_BUILD_TABLE_FILE, dsdt_tbl_offset);
 
-    build_header(linker, table_data,
-                 (void *)fadt, "FACP", sizeof(*fadt), 5, NULL, NULL);
+    build_header(linker, table_data, (void *)(table_data->data + fadt_start),
+                 "FACP", table_data->len - fadt_start, 5, NULL, NULL);
 }
 
 /* DSDT */
-- 
2.7.4

[Qemu-devel] [PULL 10/26] imx_fec: Do not link to netdev

[Peter Maydell]

From: Andrey Smirnov <andrew.smirnov@gmail.com>

Binding to a particular netdev doesn't seem to belong to this layer
and should probably be done as a part of board or SoC specific code.

Convert all of the users of this IP block to use
qdev_set_nic_properties() instead.

Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Philippe Mathieu-Daudé <f4bug@amsat.org>
Cc: qemu-devel@nongnu.org
Cc: qemu-arm@nongnu.org
Cc: yurovsky@gmail.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 hw/arm/fsl-imx6.c | 1 +
 hw/net/imx_fec.c  | 2 --
 2 files changed, 1 insertion(+), 2 deletions(-)

diff --git a/hw/arm/fsl-imx6.c b/hw/arm/fsl-imx6.c
index 59ef33e..b0d4088 100644
--- a/hw/arm/fsl-imx6.c
+++ b/hw/arm/fsl-imx6.c
@@ -385,6 +385,7 @@ static void fsl_imx6_realize(DeviceState *dev, Error **errp)
                                             spi_table[i].irq));
     }
 
+    qdev_set_nic_properties(DEVICE(&s->eth), &nd_table[0]);
     object_property_set_bool(OBJECT(&s->eth), true, "realized", &err);
     if (err) {
         error_propagate(errp, err);
diff --git a/hw/net/imx_fec.c b/hw/net/imx_fec.c
index 90e6ee3..88b4b04 100644
--- a/hw/net/imx_fec.c
+++ b/hw/net/imx_fec.c
@@ -1171,8 +1171,6 @@ static void imx_eth_realize(DeviceState *dev, Error **errp)
 
     qemu_macaddr_default_if_unset(&s->conf.macaddr);
 
-    s->conf.peers.ncs[0] = nd_table[0].netdev;
-
     s->nic = qemu_new_nic(&imx_eth_net_info, &s->conf,
                           object_get_typename(OBJECT(dev)),
                           DEVICE(dev)->id, s);
-- 
2.7.4

[Qemu-devel] [PULL 11/26] imx_fec: Refactor imx_eth_enable_rx()

[Peter Maydell]

From: Andrey Smirnov <andrew.smirnov@gmail.com>

Refactor imx_eth_enable_rx() to have more meaningfull variable name
than 'tmp' and to reduce number of logical negations done.

Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Philippe Mathieu-Daudé <f4bug@amsat.org>
Cc: qemu-devel@nongnu.org
Cc: qemu-arm@nongnu.org
Cc: yurovsky@gmail.com
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 hw/net/imx_fec.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/hw/net/imx_fec.c b/hw/net/imx_fec.c
index 88b4b04..8b2e4b8 100644
--- a/hw/net/imx_fec.c
+++ b/hw/net/imx_fec.c
@@ -536,19 +536,19 @@ static void imx_eth_do_tx(IMXFECState *s)
 static void imx_eth_enable_rx(IMXFECState *s)
 {
     IMXFECBufDesc bd;
-    bool tmp;
+    bool rx_ring_full;
 
     imx_fec_read_bd(&bd, s->rx_descriptor);
 
-    tmp = ((bd.flags & ENET_BD_E) != 0);
+    rx_ring_full = !(bd.flags & ENET_BD_E);
 
-    if (!tmp) {
+    if (rx_ring_full) {
         FEC_PRINTF("RX buffer full\n");
     } else if (!s->regs[ENET_RDAR]) {
         qemu_flush_queued_packets(qemu_get_queue(s->nic));
     }
 
-    s->regs[ENET_RDAR] = tmp ? ENET_RDAR_RDAR : 0;
+    s->regs[ENET_RDAR] = rx_ring_full ? 0 : ENET_RDAR_RDAR;
 }
 
 static void imx_eth_reset(DeviceState *d)
-- 
2.7.4

[Qemu-devel] [PULL 12/26] imx_fec: Change queue flushing heuristics

[Peter Maydell]

From: Andrey Smirnov <andrew.smirnov@gmail.com>

In current implementation, packet queue flushing logic seem to suffer
from a deadlock like scenario if a packet is received by the interface
before before Rx ring is initialized by Guest's driver. Consider the
following sequence of events:

	1. A QEMU instance is started against a TAP device on Linux
	   host, running Linux guest, e. g., something to the effect
	   of:

	   qemu-system-arm \
	      -net nic,model=imx.fec,netdev=lan0 \
	      netdev tap,id=lan0,ifname=tap0,script=no,downscript=no \
	      ... rest of the arguments ...

	2. Once QEMU starts, but before guest reaches the point where
	   FEC deriver is done initializing the HW, Guest, via TAP
	   interface, receives a number of multicast MDNS packets from
	   Host (not necessarily true for every OS, but it happens at
	   least on Fedora 25)

	3. Recieving a packet in such a state results in
	   imx_eth_can_receive() returning '0', which in turn causes
	   tap_send() to disable corresponding event (tap.c:203)

	4. Once Guest's driver reaches the point where it is ready to
	   recieve packets it prepares Rx ring descriptors and writes
	   ENET_RDAR_RDAR to ENET_RDAR register to indicate to HW that
	   more descriptors are ready. And at this points emulation
	   layer does this:

	   	 s->regs[index] = ENET_RDAR_RDAR;
                 imx_eth_enable_rx(s);

	   which, combined with:

	   	  if (!s->regs[ENET_RDAR]) {
		     qemu_flush_queued_packets(qemu_get_queue(s->nic));
		  }

	   results in Rx queue never being flushed and corresponding
	   I/O event beign disabled.

To prevent the problem, change the code to always flush packet queue
when ENET_RDAR transitions 0 -> ENET_RDAR_RDAR.

Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Philippe Mathieu-Daudé <f4bug@amsat.org>
Cc: qemu-devel@nongnu.org
Cc: qemu-arm@nongnu.org
Cc: yurovsky@gmail.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 hw/net/imx_fec.c | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

diff --git a/hw/net/imx_fec.c b/hw/net/imx_fec.c
index 8b2e4b8..eb034ff 100644
--- a/hw/net/imx_fec.c
+++ b/hw/net/imx_fec.c
@@ -533,7 +533,7 @@ static void imx_eth_do_tx(IMXFECState *s)
     }
 }
 
-static void imx_eth_enable_rx(IMXFECState *s)
+static void imx_eth_enable_rx(IMXFECState *s, bool flush)
 {
     IMXFECBufDesc bd;
     bool rx_ring_full;
@@ -544,7 +544,7 @@ static void imx_eth_enable_rx(IMXFECState *s)
 
     if (rx_ring_full) {
         FEC_PRINTF("RX buffer full\n");
-    } else if (!s->regs[ENET_RDAR]) {
+    } else if (flush) {
         qemu_flush_queued_packets(qemu_get_queue(s->nic));
     }
 
@@ -807,7 +807,7 @@ static void imx_eth_write(void *opaque, hwaddr offset, uint64_t value,
         if (s->regs[ENET_ECR] & ENET_ECR_ETHEREN) {
             if (!s->regs[index]) {
                 s->regs[index] = ENET_RDAR_RDAR;
-                imx_eth_enable_rx(s);
+                imx_eth_enable_rx(s, true);
             }
         } else {
             s->regs[index] = 0;
@@ -930,7 +930,7 @@ static int imx_eth_can_receive(NetClientState *nc)
 
     FEC_PRINTF("\n");
 
-    return s->regs[ENET_RDAR] ? 1 : 0;
+    return !!s->regs[ENET_RDAR];
 }
 
 static ssize_t imx_fec_receive(NetClientState *nc, const uint8_t *buf,
@@ -1020,7 +1020,7 @@ static ssize_t imx_fec_receive(NetClientState *nc, const uint8_t *buf,
         }
     }
     s->rx_descriptor = addr;
-    imx_eth_enable_rx(s);
+    imx_eth_enable_rx(s, false);
     imx_eth_update(s);
     return len;
 }
@@ -1116,7 +1116,7 @@ static ssize_t imx_enet_receive(NetClientState *nc, const uint8_t *buf,
         }
     }
     s->rx_descriptor = addr;
-    imx_eth_enable_rx(s);
+    imx_eth_enable_rx(s, false);
     imx_eth_update(s);
     return len;
 }
-- 
2.7.4

[Qemu-devel] [PULL 13/26] imx_fec: Move Tx frame buffer away from the stack

[Peter Maydell]

From: Andrey Smirnov <andrew.smirnov@gmail.com>

Make Tx frame assembly buffer to be a paort of IMXFECState structure
to avoid a concern about having large data buffer on the stack.

Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Philippe Mathieu-Daudé <f4bug@amsat.org>
Cc: qemu-devel@nongnu.org
Cc: qemu-arm@nongnu.org
Cc: yurovsky@gmail.com
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 include/hw/net/imx_fec.h |  3 +++
 hw/net/imx_fec.c         | 22 +++++++++++-----------
 2 files changed, 14 insertions(+), 11 deletions(-)

diff --git a/include/hw/net/imx_fec.h b/include/hw/net/imx_fec.h
index 62ad473..6799387 100644
--- a/include/hw/net/imx_fec.h
+++ b/include/hw/net/imx_fec.h
@@ -252,6 +252,9 @@ typedef struct IMXFECState {
     uint32_t phy_int_mask;
 
     bool is_fec;
+
+    /* Buffer used to assemble a Tx frame */
+    uint8_t frame[ENET_MAX_FRAME_SIZE];
 } IMXFECState;
 
 #endif
diff --git a/hw/net/imx_fec.c b/hw/net/imx_fec.c
index eb034ff..56cb722 100644
--- a/hw/net/imx_fec.c
+++ b/hw/net/imx_fec.c
@@ -405,8 +405,7 @@ static void imx_eth_update(IMXFECState *s)
 static void imx_fec_do_tx(IMXFECState *s)
 {
     int frame_size = 0, descnt = 0;
-    uint8_t frame[ENET_MAX_FRAME_SIZE];
-    uint8_t *ptr = frame;
+    uint8_t *ptr = s->frame;
     uint32_t addr = s->tx_descriptor;
 
     while (descnt++ < IMX_MAX_DESC) {
@@ -431,8 +430,8 @@ static void imx_fec_do_tx(IMXFECState *s)
         frame_size += len;
         if (bd.flags & ENET_BD_L) {
             /* Last buffer in frame.  */
-            qemu_send_packet(qemu_get_queue(s->nic), frame, frame_size);
-            ptr = frame;
+            qemu_send_packet(qemu_get_queue(s->nic), s->frame, frame_size);
+            ptr = s->frame;
             frame_size = 0;
             s->regs[ENET_EIR] |= ENET_INT_TXF;
         }
@@ -456,8 +455,7 @@ static void imx_fec_do_tx(IMXFECState *s)
 static void imx_enet_do_tx(IMXFECState *s)
 {
     int frame_size = 0, descnt = 0;
-    uint8_t frame[ENET_MAX_FRAME_SIZE];
-    uint8_t *ptr = frame;
+    uint8_t *ptr = s->frame;
     uint32_t addr = s->tx_descriptor;
 
     while (descnt++ < IMX_MAX_DESC) {
@@ -482,13 +480,13 @@ static void imx_enet_do_tx(IMXFECState *s)
         frame_size += len;
         if (bd.flags & ENET_BD_L) {
             if (bd.option & ENET_BD_PINS) {
-                struct ip_header *ip_hd = PKT_GET_IP_HDR(frame);
+                struct ip_header *ip_hd = PKT_GET_IP_HDR(s->frame);
                 if (IP_HEADER_VERSION(ip_hd) == 4) {
-                    net_checksum_calculate(frame, frame_size);
+                    net_checksum_calculate(s->frame, frame_size);
                 }
             }
             if (bd.option & ENET_BD_IINS) {
-                struct ip_header *ip_hd = PKT_GET_IP_HDR(frame);
+                struct ip_header *ip_hd = PKT_GET_IP_HDR(s->frame);
                 /* We compute checksum only for IPv4 frames */
                 if (IP_HEADER_VERSION(ip_hd) == 4) {
                     uint16_t csum;
@@ -498,8 +496,10 @@ static void imx_enet_do_tx(IMXFECState *s)
                 }
             }
             /* Last buffer in frame.  */
-            qemu_send_packet(qemu_get_queue(s->nic), frame, len);
-            ptr = frame;
+
+            qemu_send_packet(qemu_get_queue(s->nic), s->frame, len);
+            ptr = s->frame;
+
             frame_size = 0;
             if (bd.option & ENET_BD_TX_INT) {
                 s->regs[ENET_EIR] |= ENET_INT_TXF;
-- 
2.7.4

[Qemu-devel] [PULL 14/26] imx_fec: Use ENET_FTRL to determine truncation length

[Peter Maydell]

From: Andrey Smirnov <andrew.smirnov@gmail.com>

Frame truncation length, TRUNC_FL, is determined by the contents of
ENET_FTRL register, so convert the code to use it instead of a
hardcoded constant.

To avoid the case where TRUNC_FL is greater that ENET_MAX_FRAME_SIZE,
increase the value of the latter to its theoretical maximum of 16K.

Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Philippe Mathieu-Daudé <f4bug@amsat.org>
Cc: qemu-devel@nongnu.org
Cc: qemu-arm@nongnu.org
Cc: yurovsky@gmail.com
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 include/hw/net/imx_fec.h | 3 ++-
 hw/net/imx_fec.c         | 4 ++--
 2 files changed, 4 insertions(+), 3 deletions(-)

diff --git a/include/hw/net/imx_fec.h b/include/hw/net/imx_fec.h
index 6799387..a390d70 100644
--- a/include/hw/net/imx_fec.h
+++ b/include/hw/net/imx_fec.h
@@ -86,7 +86,6 @@
 #define ENET_TCCR3             393
 #define ENET_MAX               400
 
-#define ENET_MAX_FRAME_SIZE    2032
 
 /* EIR and EIMR */
 #define ENET_INT_HB            (1 << 31)
@@ -155,6 +154,8 @@
 #define ENET_RCR_NLC           (1 << 30)
 #define ENET_RCR_GRS           (1 << 31)
 
+#define ENET_MAX_FRAME_SIZE    (1 << ENET_RCR_MAX_FL_LENGTH)
+
 /* TCR */
 #define ENET_TCR_GTS           (1 << 0)
 #define ENET_TCR_FDEN          (1 << 2)
diff --git a/hw/net/imx_fec.c b/hw/net/imx_fec.c
index 56cb722..50da91b 100644
--- a/hw/net/imx_fec.c
+++ b/hw/net/imx_fec.c
@@ -1052,8 +1052,8 @@ static ssize_t imx_enet_receive(NetClientState *nc, const uint8_t *buf,
     crc_ptr = (uint8_t *) &crc;
 
     /* Huge frames are truncted.  */
-    if (size > ENET_MAX_FRAME_SIZE) {
-        size = ENET_MAX_FRAME_SIZE;
+    if (size > s->regs[ENET_FTRL]) {
+        size = s->regs[ENET_FTRL];
         flags |= ENET_BD_TR | ENET_BD_LG;
     }
 
-- 
2.7.4

[Qemu-devel] [PULL 15/26] imx_fec: Use MIN instead of explicit ternary operator

[Peter Maydell]

From: Andrey Smirnov <andrew.smirnov@gmail.com>

Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Philippe Mathieu-Daudé <f4bug@amsat.org>
Cc: qemu-devel@nongnu.org
Cc: qemu-arm@nongnu.org
Cc: yurovsky@gmail.com
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 hw/net/imx_fec.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/hw/net/imx_fec.c b/hw/net/imx_fec.c
index 50da91b..6feda18 100644
--- a/hw/net/imx_fec.c
+++ b/hw/net/imx_fec.c
@@ -1076,7 +1076,7 @@ static ssize_t imx_enet_receive(NetClientState *nc, const uint8_t *buf,
                           TYPE_IMX_FEC, __func__);
             break;
         }
-        buf_len = (size <= s->regs[ENET_MRBR]) ? size : s->regs[ENET_MRBR];
+        buf_len = MIN(size, s->regs[ENET_MRBR]);
         bd.length = buf_len;
         size -= buf_len;
 
-- 
2.7.4

[Qemu-devel] [PULL 16/26] imx_fec: Emulate SHIFT16 in ENETx_RACC

[Peter Maydell]

From: Andrey Smirnov <andrew.smirnov@gmail.com>

Needed to support latest Linux kernel driver which relies on that
functionality.

Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Philippe Mathieu-Daudé <f4bug@amsat.org>
Cc: qemu-devel@nongnu.org
Cc: qemu-arm@nongnu.org
Cc: yurovsky@gmail.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 include/hw/net/imx_fec.h |  2 ++
 hw/net/imx_fec.c         | 23 +++++++++++++++++++++++
 2 files changed, 25 insertions(+)

diff --git a/include/hw/net/imx_fec.h b/include/hw/net/imx_fec.h
index a390d70..af0840a 100644
--- a/include/hw/net/imx_fec.h
+++ b/include/hw/net/imx_fec.h
@@ -170,6 +170,8 @@
 #define ENET_TWFR_TFWR_LENGTH  (6)
 #define ENET_TWFR_STRFWD       (1 << 8)
 
+#define ENET_RACC_SHIFT16      BIT(7)
+
 /* Buffer Descriptor.  */
 typedef struct {
     uint16_t length;
diff --git a/hw/net/imx_fec.c b/hw/net/imx_fec.c
index 6feda18..825c879 100644
--- a/hw/net/imx_fec.c
+++ b/hw/net/imx_fec.c
@@ -1037,6 +1037,7 @@ static ssize_t imx_enet_receive(NetClientState *nc, const uint8_t *buf,
     uint8_t *crc_ptr;
     unsigned int buf_len;
     size_t size = len;
+    bool shift16 = s->regs[ENET_RACC] & ENET_RACC_SHIFT16;
 
     FEC_PRINTF("len %d\n", (int)size);
 
@@ -1051,6 +1052,10 @@ static ssize_t imx_enet_receive(NetClientState *nc, const uint8_t *buf,
     crc = cpu_to_be32(crc32(~0, buf, size));
     crc_ptr = (uint8_t *) &crc;
 
+    if (shift16) {
+        size += 2;
+    }
+
     /* Huge frames are truncted.  */
     if (size > s->regs[ENET_FTRL]) {
         size = s->regs[ENET_FTRL];
@@ -1087,6 +1092,24 @@ static ssize_t imx_enet_receive(NetClientState *nc, const uint8_t *buf,
             buf_len += size - 4;
         }
         buf_addr = bd.data;
+
+        if (shift16) {
+            /*
+             * If SHIFT16 bit of ENETx_RACC register is set we need to
+             * align the payload to 4-byte boundary.
+             */
+            const uint8_t zeros[2] = { 0 };
+
+            dma_memory_write(&address_space_memory, buf_addr,
+                             zeros, sizeof(zeros));
+
+            buf_addr += sizeof(zeros);
+            buf_len  -= sizeof(zeros);
+
+            /* We only do this once per Ethernet frame */
+            shift16 = false;
+        }
+
         dma_memory_write(&address_space_memory, buf_addr, buf, buf_len);
         buf += buf_len;
         if (size < 4) {
-- 
2.7.4

[Qemu-devel] [PULL 17/26] imx_fec: Add support for multiple Tx DMA rings

[Peter Maydell]

From: Andrey Smirnov <andrew.smirnov@gmail.com>

More recent version of the IP block support more than one Tx DMA ring,
so add the code implementing that feature.

Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Philippe Mathieu-Daudé <f4bug@amsat.org>
Cc: qemu-devel@nongnu.org
Cc: qemu-arm@nongnu.org
Cc: yurovsky@gmail.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 include/hw/net/imx_fec.h |  18 ++++++-
 hw/net/imx_fec.c         | 133 ++++++++++++++++++++++++++++++++++++++++-------
 2 files changed, 130 insertions(+), 21 deletions(-)

diff --git a/include/hw/net/imx_fec.h b/include/hw/net/imx_fec.h
index af0840a..91ef8f8 100644
--- a/include/hw/net/imx_fec.h
+++ b/include/hw/net/imx_fec.h
@@ -52,6 +52,8 @@
 #define ENET_TFWR              81
 #define ENET_FRBR              83
 #define ENET_FRSR              84
+#define ENET_TDSR1             89
+#define ENET_TDSR2             92
 #define ENET_RDSR              96
 #define ENET_TDSR              97
 #define ENET_MRBR              98
@@ -66,6 +68,8 @@
 #define ENET_FTRL              108
 #define ENET_TACC              112
 #define ENET_RACC              113
+#define ENET_TDAR1             121
+#define ENET_TDAR2             123
 #define ENET_MIIGSK_CFGR       192
 #define ENET_MIIGSK_ENR        194
 #define ENET_ATCR              256
@@ -105,13 +109,18 @@
 #define ENET_INT_WAKEUP        (1 << 17)
 #define ENET_INT_TS_AVAIL      (1 << 16)
 #define ENET_INT_TS_TIMER      (1 << 15)
+#define ENET_INT_TXF2          (1 <<  7)
+#define ENET_INT_TXB2          (1 <<  6)
+#define ENET_INT_TXF1          (1 <<  3)
+#define ENET_INT_TXB1          (1 <<  2)
 
 #define ENET_INT_MAC           (ENET_INT_HB | ENET_INT_BABR | ENET_INT_BABT | \
                                 ENET_INT_GRA | ENET_INT_TXF | ENET_INT_TXB | \
                                 ENET_INT_RXF | ENET_INT_RXB | ENET_INT_MII | \
                                 ENET_INT_EBERR | ENET_INT_LC | ENET_INT_RL | \
                                 ENET_INT_UN | ENET_INT_PLR | ENET_INT_WAKEUP | \
-                                ENET_INT_TS_AVAIL)
+                                ENET_INT_TS_AVAIL | ENET_INT_TXF1 | \
+                                ENET_INT_TXB1 | ENET_INT_TXF2 | ENET_INT_TXB2)
 
 /* RDAR */
 #define ENET_RDAR_RDAR         (1 << 24)
@@ -234,6 +243,9 @@ typedef struct {
 
 #define ENET_BD_BDU            (1 << 31)
 
+#define ENET_TX_RING_NUM       3
+
+
 typedef struct IMXFECState {
     /*< private >*/
     SysBusDevice parent_obj;
@@ -246,7 +258,9 @@ typedef struct IMXFECState {
 
     uint32_t regs[ENET_MAX];
     uint32_t rx_descriptor;
-    uint32_t tx_descriptor;
+
+    uint32_t tx_descriptor[ENET_TX_RING_NUM];
+    uint32_t tx_ring_num;
 
     uint32_t phy_status;
     uint32_t phy_control;
diff --git a/hw/net/imx_fec.c b/hw/net/imx_fec.c
index 825c879..77d27f7 100644
--- a/hw/net/imx_fec.c
+++ b/hw/net/imx_fec.c
@@ -196,6 +196,31 @@ static const char *imx_eth_reg_name(IMXFECState *s, uint32_t index)
     }
 }
 
+/*
+ * Versions of this device with more than one TX descriptor save the
+ * 2nd and 3rd descriptors in a subsection, to maintain migration
+ * compatibility with previous versions of the device that only
+ * supported a single descriptor.
+ */
+static bool imx_eth_is_multi_tx_ring(void *opaque)
+{
+    IMXFECState *s = IMX_FEC(opaque);
+
+    return s->tx_ring_num > 1;
+}
+
+static const VMStateDescription vmstate_imx_eth_txdescs = {
+    .name = "imx.fec/txdescs",
+    .version_id = 1,
+    .minimum_version_id = 1,
+    .needed = imx_eth_is_multi_tx_ring,
+    .fields = (VMStateField[]) {
+         VMSTATE_UINT32(tx_descriptor[1], IMXFECState),
+         VMSTATE_UINT32(tx_descriptor[2], IMXFECState),
+         VMSTATE_END_OF_LIST()
+    }
+};
+
 static const VMStateDescription vmstate_imx_eth = {
     .name = TYPE_IMX_FEC,
     .version_id = 2,
@@ -203,15 +228,18 @@ static const VMStateDescription vmstate_imx_eth = {
     .fields = (VMStateField[]) {
         VMSTATE_UINT32_ARRAY(regs, IMXFECState, ENET_MAX),
         VMSTATE_UINT32(rx_descriptor, IMXFECState),
-        VMSTATE_UINT32(tx_descriptor, IMXFECState),
-
+        VMSTATE_UINT32(tx_descriptor[0], IMXFECState),
         VMSTATE_UINT32(phy_status, IMXFECState),
         VMSTATE_UINT32(phy_control, IMXFECState),
         VMSTATE_UINT32(phy_advertise, IMXFECState),
         VMSTATE_UINT32(phy_int, IMXFECState),
         VMSTATE_UINT32(phy_int_mask, IMXFECState),
         VMSTATE_END_OF_LIST()
-    }
+    },
+    .subsections = (const VMStateDescription * []) {
+        &vmstate_imx_eth_txdescs,
+        NULL
+    },
 };
 
 #define PHY_INT_ENERGYON            (1 << 7)
@@ -406,7 +434,7 @@ static void imx_fec_do_tx(IMXFECState *s)
 {
     int frame_size = 0, descnt = 0;
     uint8_t *ptr = s->frame;
-    uint32_t addr = s->tx_descriptor;
+    uint32_t addr = s->tx_descriptor[0];
 
     while (descnt++ < IMX_MAX_DESC) {
         IMXFECBufDesc bd;
@@ -447,16 +475,47 @@ static void imx_fec_do_tx(IMXFECState *s)
         }
     }
 
-    s->tx_descriptor = addr;
+    s->tx_descriptor[0] = addr;
 
     imx_eth_update(s);
 }
 
-static void imx_enet_do_tx(IMXFECState *s)
+static void imx_enet_do_tx(IMXFECState *s, uint32_t index)
 {
     int frame_size = 0, descnt = 0;
+
     uint8_t *ptr = s->frame;
-    uint32_t addr = s->tx_descriptor;
+    uint32_t addr, int_txb, int_txf, tdsr;
+    size_t ring;
+
+    switch (index) {
+    case ENET_TDAR:
+        ring    = 0;
+        int_txb = ENET_INT_TXB;
+        int_txf = ENET_INT_TXF;
+        tdsr    = ENET_TDSR;
+        break;
+    case ENET_TDAR1:
+        ring    = 1;
+        int_txb = ENET_INT_TXB1;
+        int_txf = ENET_INT_TXF1;
+        tdsr    = ENET_TDSR1;
+        break;
+    case ENET_TDAR2:
+        ring    = 2;
+        int_txb = ENET_INT_TXB2;
+        int_txf = ENET_INT_TXF2;
+        tdsr    = ENET_TDSR2;
+        break;
+    default:
+        qemu_log_mask(LOG_GUEST_ERROR,
+                      "%s: bogus value for index %x\n",
+                      __func__, index);
+        abort();
+        break;
+    }
+
+    addr = s->tx_descriptor[ring];
 
     while (descnt++ < IMX_MAX_DESC) {
         IMXENETBufDesc bd;
@@ -502,32 +561,32 @@ static void imx_enet_do_tx(IMXFECState *s)
 
             frame_size = 0;
             if (bd.option & ENET_BD_TX_INT) {
-                s->regs[ENET_EIR] |= ENET_INT_TXF;
+                s->regs[ENET_EIR] |= int_txf;
             }
         }
         if (bd.option & ENET_BD_TX_INT) {
-            s->regs[ENET_EIR] |= ENET_INT_TXB;
+            s->regs[ENET_EIR] |= int_txb;
         }
         bd.flags &= ~ENET_BD_R;
         /* Write back the modified descriptor.  */
         imx_enet_write_bd(&bd, addr);
         /* Advance to the next descriptor.  */
         if ((bd.flags & ENET_BD_W) != 0) {
-            addr = s->regs[ENET_TDSR];
+            addr = s->regs[tdsr];
         } else {
             addr += sizeof(bd);
         }
     }
 
-    s->tx_descriptor = addr;
+    s->tx_descriptor[ring] = addr;
 
     imx_eth_update(s);
 }
 
-static void imx_eth_do_tx(IMXFECState *s)
+static void imx_eth_do_tx(IMXFECState *s, uint32_t index)
 {
     if (!s->is_fec && (s->regs[ENET_ECR] & ENET_ECR_EN1588)) {
-        imx_enet_do_tx(s);
+        imx_enet_do_tx(s, index);
     } else {
         imx_fec_do_tx(s);
     }
@@ -585,7 +644,7 @@ static void imx_eth_reset(DeviceState *d)
     }
 
     s->rx_descriptor = 0;
-    s->tx_descriptor = 0;
+    memset(s->tx_descriptor, 0, sizeof(s->tx_descriptor));
 
     /* We also reset the PHY */
     phy_reset(s);
@@ -791,6 +850,7 @@ static void imx_eth_write(void *opaque, hwaddr offset, uint64_t value,
                            unsigned size)
 {
     IMXFECState *s = IMX_FEC(opaque);
+    const bool single_tx_ring = !imx_eth_is_multi_tx_ring(s);
     uint32_t index = offset >> 2;
 
     FEC_PRINTF("reg[%s] <= 0x%" PRIx32 "\n", imx_eth_reg_name(s, index),
@@ -813,10 +873,18 @@ static void imx_eth_write(void *opaque, hwaddr offset, uint64_t value,
             s->regs[index] = 0;
         }
         break;
-    case ENET_TDAR:
+    case ENET_TDAR1:    /* FALLTHROUGH */
+    case ENET_TDAR2:    /* FALLTHROUGH */
+        if (unlikely(single_tx_ring)) {
+            qemu_log_mask(LOG_GUEST_ERROR,
+                          "[%s]%s: trying to access TDAR2 or TDAR1\n",
+                          TYPE_IMX_FEC, __func__);
+            return;
+        }
+    case ENET_TDAR:     /* FALLTHROUGH */
         if (s->regs[ENET_ECR] & ENET_ECR_ETHEREN) {
             s->regs[index] = ENET_TDAR_TDAR;
-            imx_eth_do_tx(s);
+            imx_eth_do_tx(s, index);
         }
         s->regs[index] = 0;
         break;
@@ -828,8 +896,12 @@ static void imx_eth_write(void *opaque, hwaddr offset, uint64_t value,
         if ((s->regs[index] & ENET_ECR_ETHEREN) == 0) {
             s->regs[ENET_RDAR] = 0;
             s->rx_descriptor = s->regs[ENET_RDSR];
-            s->regs[ENET_TDAR] = 0;
-            s->tx_descriptor = s->regs[ENET_TDSR];
+            s->regs[ENET_TDAR]  = 0;
+            s->regs[ENET_TDAR1] = 0;
+            s->regs[ENET_TDAR2] = 0;
+            s->tx_descriptor[0] = s->regs[ENET_TDSR];
+            s->tx_descriptor[1] = s->regs[ENET_TDSR1];
+            s->tx_descriptor[2] = s->regs[ENET_TDSR2];
         }
         break;
     case ENET_MMFR:
@@ -907,7 +979,29 @@ static void imx_eth_write(void *opaque, hwaddr offset, uint64_t value,
         } else {
             s->regs[index] = value & ~7;
         }
-        s->tx_descriptor = s->regs[index];
+        s->tx_descriptor[0] = s->regs[index];
+        break;
+    case ENET_TDSR1:
+        if (unlikely(single_tx_ring)) {
+            qemu_log_mask(LOG_GUEST_ERROR,
+                          "[%s]%s: trying to access TDSR1\n",
+                          TYPE_IMX_FEC, __func__);
+            return;
+        }
+
+        s->regs[index] = value & ~7;
+        s->tx_descriptor[1] = s->regs[index];
+        break;
+    case ENET_TDSR2:
+        if (unlikely(single_tx_ring)) {
+            qemu_log_mask(LOG_GUEST_ERROR,
+                          "[%s]%s: trying to access TDSR2\n",
+                          TYPE_IMX_FEC, __func__);
+            return;
+        }
+
+        s->regs[index] = value & ~7;
+        s->tx_descriptor[2] = s->regs[index];
         break;
     case ENET_MRBR:
         s->regs[index] = value & 0x00003ff0;
@@ -1203,6 +1297,7 @@ static void imx_eth_realize(DeviceState *dev, Error **errp)
 
 static Property imx_eth_properties[] = {
     DEFINE_NIC_PROPERTIES(IMXFECState, conf),
+    DEFINE_PROP_UINT32("tx-ring-num", IMXFECState, tx_ring_num, 1),
     DEFINE_PROP_END_OF_LIST(),
 };
 
-- 
2.7.4

[Qemu-devel] [PULL 18/26] imx_fec: Use correct length for packet size

[Peter Maydell]

From: Andrey Smirnov <andrew.smirnov@gmail.com>

Use 'frame_size' instead of 'len' when calling qemu_send_packet(),
failing to do so results in malformed packets send in case when that
packed is fragmented into multiple DMA transactions.

Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Philippe Mathieu-Daudé <f4bug@amsat.org>
Cc: qemu-devel@nongnu.org
Cc: qemu-arm@nongnu.org
Cc: yurovsky@gmail.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 hw/net/imx_fec.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/hw/net/imx_fec.c b/hw/net/imx_fec.c
index 77d27f7..6cb9e2e 100644
--- a/hw/net/imx_fec.c
+++ b/hw/net/imx_fec.c
@@ -556,7 +556,7 @@ static void imx_enet_do_tx(IMXFECState *s, uint32_t index)
             }
             /* Last buffer in frame.  */
 
-            qemu_send_packet(qemu_get_queue(s->nic), s->frame, len);
+            qemu_send_packet(qemu_get_queue(s->nic), s->frame, frame_size);
             ptr = s->frame;
 
             frame_size = 0;
-- 
2.7.4

[Qemu-devel] [PULL 19/26] imx_fec: Fix a typo in imx_enet_receive()

[Peter Maydell]

From: Andrey Smirnov <andrew.smirnov@gmail.com>

Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Philippe Mathieu-Daudé <f4bug@amsat.org>
Cc: qemu-devel@nongnu.org
Cc: qemu-arm@nongnu.org
Cc: yurovsky@gmail.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 hw/net/imx_fec.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/hw/net/imx_fec.c b/hw/net/imx_fec.c
index 6cb9e2e..c1cf7f9 100644
--- a/hw/net/imx_fec.c
+++ b/hw/net/imx_fec.c
@@ -1150,7 +1150,7 @@ static ssize_t imx_enet_receive(NetClientState *nc, const uint8_t *buf,
         size += 2;
     }
 
-    /* Huge frames are truncted.  */
+    /* Huge frames are truncated. */
     if (size > s->regs[ENET_FTRL]) {
         size = s->regs[ENET_FTRL];
         flags |= ENET_BD_TR | ENET_BD_LG;
-- 
2.7.4

[Qemu-devel] [PULL 20/26] imx_fec: Reserve full FSL_IMX25_FEC_SIZE page for the register file

[Peter Maydell]

From: Andrey Smirnov <andrew.smirnov@gmail.com>

Some i.MX SoCs (e.g. i.MX7) have FEC registers going as far as offset
0x614, so to avoid getting aborts when accessing those on QEMU, extend
the register file to cover FSL_IMX25_FEC_SIZE(16K) of address space
instead of just 1K.

Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Philippe Mathieu-Daudé <f4bug@amsat.org>
Cc: qemu-devel@nongnu.org
Cc: qemu-arm@nongnu.org
Cc: yurovsky@gmail.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 include/hw/arm/fsl-imx25.h | 1 -
 include/hw/net/imx_fec.h   | 1 +
 hw/net/imx_fec.c           | 2 +-
 3 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/include/hw/arm/fsl-imx25.h b/include/hw/arm/fsl-imx25.h
index d0e8e9d..65a7371 100644
--- a/include/hw/arm/fsl-imx25.h
+++ b/include/hw/arm/fsl-imx25.h
@@ -192,7 +192,6 @@ typedef struct FslIMX25State {
 #define FSL_IMX25_UART5_ADDR    0x5002C000
 #define FSL_IMX25_UART5_SIZE    0x4000
 #define FSL_IMX25_FEC_ADDR      0x50038000
-#define FSL_IMX25_FEC_SIZE      0x4000
 #define FSL_IMX25_CCM_ADDR      0x53F80000
 #define FSL_IMX25_CCM_SIZE      0x4000
 #define FSL_IMX25_GPT4_ADDR     0x53F84000
diff --git a/include/hw/net/imx_fec.h b/include/hw/net/imx_fec.h
index 91ef8f8..7b3faa4 100644
--- a/include/hw/net/imx_fec.h
+++ b/include/hw/net/imx_fec.h
@@ -245,6 +245,7 @@ typedef struct {
 
 #define ENET_TX_RING_NUM       3
 
+#define FSL_IMX25_FEC_SIZE      0x4000
 
 typedef struct IMXFECState {
     /*< private >*/
diff --git a/hw/net/imx_fec.c b/hw/net/imx_fec.c
index c1cf7f9..4fb48f6 100644
--- a/hw/net/imx_fec.c
+++ b/hw/net/imx_fec.c
@@ -1281,7 +1281,7 @@ static void imx_eth_realize(DeviceState *dev, Error **errp)
     SysBusDevice *sbd = SYS_BUS_DEVICE(dev);
 
     memory_region_init_io(&s->iomem, OBJECT(dev), &imx_eth_ops, s,
-                          TYPE_IMX_FEC, 0x400);
+                          TYPE_IMX_FEC, FSL_IMX25_FEC_SIZE);
     sysbus_init_mmio(sbd, &s->iomem);
     sysbus_init_irq(sbd, &s->irq[0]);
     sysbus_init_irq(sbd, &s->irq[1]);
-- 
2.7.4

[Qemu-devel] [PULL 21/26] hw/timer/pxa2xx_timer: replace hw_error() -> qemu_log_mask()

[Peter Maydell]

From: Philippe Mathieu-Daudé <f4bug@amsat.org>

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alistair Francis <alistair.francis@xilinx.com>
Message-id: 20180103224208.30291-2-f4bug@amsat.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 hw/timer/pxa2xx_timer.c | 17 +++++++++++++++--
 1 file changed, 15 insertions(+), 2 deletions(-)

diff --git a/hw/timer/pxa2xx_timer.c b/hw/timer/pxa2xx_timer.c
index 68ba5a7..a489bf5 100644
--- a/hw/timer/pxa2xx_timer.c
+++ b/hw/timer/pxa2xx_timer.c
@@ -13,6 +13,7 @@
 #include "sysemu/sysemu.h"
 #include "hw/arm/pxa.h"
 #include "hw/sysbus.h"
+#include "qemu/log.h"
 
 #define OSMR0	0x00
 #define OSMR1	0x04
@@ -252,8 +253,14 @@ static uint64_t pxa2xx_timer_read(void *opaque, hwaddr offset,
     case OSNR:
         return s->snapshot;
     default:
+        qemu_log_mask(LOG_UNIMP,
+                      "%s: unknown register 0x%02" HWADDR_PRIx "\n",
+                      __func__, offset);
+        break;
     badreg:
-        hw_error("pxa2xx_timer_read: Bad offset " REG_FMT "\n", offset);
+        qemu_log_mask(LOG_GUEST_ERROR,
+                      "%s: incorrect register 0x%02" HWADDR_PRIx "\n",
+                      __func__, offset);
     }
 
     return 0;
@@ -377,8 +384,14 @@ static void pxa2xx_timer_write(void *opaque, hwaddr offset,
         }
         break;
     default:
+        qemu_log_mask(LOG_UNIMP,
+                      "%s: unknown register 0x%02" HWADDR_PRIx " "
+                      "(value 0x%08" PRIx64 ")\n",  __func__, offset, value);
+        break;
     badreg:
-        hw_error("pxa2xx_timer_write: Bad offset " REG_FMT "\n", offset);
+        qemu_log_mask(LOG_GUEST_ERROR,
+                      "%s: incorrect register 0x%02" HWADDR_PRIx " "
+                      "(value 0x%08" PRIx64 ")\n", __func__, offset, value);
     }
 }
 
-- 
2.7.4

[Qemu-devel] [PULL 22/26] hw/sd/pxa2xx_mmci: add read/write() trace events

[Peter Maydell]

From: Philippe Mathieu-Daudé <f4bug@amsat.org>

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alistair Francis <alistair.francis@xilinx.com>
Message-id: 20180104000156.30932-1-f4bug@amsat.org
[PMM: add missing include]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 hw/sd/pxa2xx_mmci.c | 78 ++++++++++++++++++++++++++++++++++-------------------
 hw/sd/trace-events  |  4 +++
 2 files changed, 54 insertions(+), 28 deletions(-)

diff --git a/hw/sd/pxa2xx_mmci.c b/hw/sd/pxa2xx_mmci.c
index 3deccf0..82f8ec0 100644
--- a/hw/sd/pxa2xx_mmci.c
+++ b/hw/sd/pxa2xx_mmci.c
@@ -19,6 +19,8 @@
 #include "hw/qdev.h"
 #include "hw/qdev-properties.h"
 #include "qemu/error-report.h"
+#include "qemu/log.h"
+#include "trace.h"
 
 #define TYPE_PXA2XX_MMCI "pxa2xx-mmci"
 #define PXA2XX_MMCI(obj) OBJECT_CHECK(PXA2xxMMCIState, (obj), TYPE_PXA2XX_MMCI)
@@ -278,45 +280,56 @@ static void pxa2xx_mmci_wakequeues(PXA2xxMMCIState *s)
 static uint64_t pxa2xx_mmci_read(void *opaque, hwaddr offset, unsigned size)
 {
     PXA2xxMMCIState *s = (PXA2xxMMCIState *) opaque;
-    uint32_t ret;
+    uint32_t ret = 0;
 
     switch (offset) {
     case MMC_STRPCL:
-        return 0;
+        break;
     case MMC_STAT:
-        return s->status;
+        ret = s->status;
+        break;
     case MMC_CLKRT:
-        return s->clkrt;
+        ret = s->clkrt;
+        break;
     case MMC_SPI:
-        return s->spi;
+        ret = s->spi;
+        break;
     case MMC_CMDAT:
-        return s->cmdat;
+        ret = s->cmdat;
+        break;
     case MMC_RESTO:
-        return s->resp_tout;
+        ret = s->resp_tout;
+        break;
     case MMC_RDTO:
-        return s->read_tout;
+        ret = s->read_tout;
+        break;
     case MMC_BLKLEN:
-        return s->blklen;
+        ret = s->blklen;
+        break;
     case MMC_NUMBLK:
-        return s->numblk;
+        ret = s->numblk;
+        break;
     case MMC_PRTBUF:
-        return 0;
+        break;
     case MMC_I_MASK:
-        return s->intmask;
+        ret = s->intmask;
+        break;
     case MMC_I_REG:
-        return s->intreq;
+        ret = s->intreq;
+        break;
     case MMC_CMD:
-        return s->cmd | 0x40;
+        ret = s->cmd | 0x40;
+        break;
     case MMC_ARGH:
-        return s->arg >> 16;
+        ret = s->arg >> 16;
+        break;
     case MMC_ARGL:
-        return s->arg & 0xffff;
+        ret = s->arg & 0xffff;
+        break;
     case MMC_RES:
-        if (s->resp_len < 9)
-            return s->resp_fifo[s->resp_len ++];
-        return 0;
+        ret = (s->resp_len < 9) ? s->resp_fifo[s->resp_len++] : 0;
+        break;
     case MMC_RXFIFO:
-        ret = 0;
         while (size-- && s->rx_len) {
             ret |= s->rx_fifo[s->rx_start++] << (size << 3);
             s->rx_start &= 0x1f;
@@ -324,16 +337,20 @@ static uint64_t pxa2xx_mmci_read(void *opaque, hwaddr offset, unsigned size)
         }
         s->intreq &= ~INT_RXFIFO_REQ;
         pxa2xx_mmci_fifo_update(s);
-        return ret;
+        break;
     case MMC_RDWAIT:
-        return 0;
+        break;
     case MMC_BLKS_REM:
-        return s->numblk;
+        ret = s->numblk;
+        break;
     default:
-        hw_error("%s: Bad offset " REG_FMT "\n", __FUNCTION__, offset);
+        qemu_log_mask(LOG_GUEST_ERROR,
+                      "%s: incorrect register 0x%02" HWADDR_PRIx "\n",
+                      __func__, offset);
     }
+    trace_pxa2xx_mmci_read(size, offset, ret);
 
-    return 0;
+    return ret;
 }
 
 static void pxa2xx_mmci_write(void *opaque,
@@ -341,6 +358,7 @@ static void pxa2xx_mmci_write(void *opaque,
 {
     PXA2xxMMCIState *s = (PXA2xxMMCIState *) opaque;
 
+    trace_pxa2xx_mmci_write(size, offset, value);
     switch (offset) {
     case MMC_STRPCL:
         if (value & STRPCL_STRT_CLK) {
@@ -368,8 +386,10 @@ static void pxa2xx_mmci_write(void *opaque,
 
     case MMC_SPI:
         s->spi = value & 0xf;
-        if (value & SPI_SPI_MODE)
-            printf("%s: attempted to use card in SPI mode\n", __FUNCTION__);
+        if (value & SPI_SPI_MODE) {
+            qemu_log_mask(LOG_GUEST_ERROR,
+                          "%s: attempted to use card in SPI mode\n", __func__);
+        }
         break;
 
     case MMC_CMDAT:
@@ -442,7 +462,9 @@ static void pxa2xx_mmci_write(void *opaque,
         break;
 
     default:
-        hw_error("%s: Bad offset " REG_FMT "\n", __FUNCTION__, offset);
+        qemu_log_mask(LOG_GUEST_ERROR,
+                      "%s: incorrect reg 0x%02" HWADDR_PRIx " "
+                      "(value 0x%08" PRIx64 ")\n", __func__, offset, value);
     }
 }
 
diff --git a/hw/sd/trace-events b/hw/sd/trace-events
index 1fc0bcf..6eca347 100644
--- a/hw/sd/trace-events
+++ b/hw/sd/trace-events
@@ -3,3 +3,7 @@
 # hw/sd/milkymist-memcard.c
 milkymist_memcard_memory_read(uint32_t addr, uint32_t value) "addr 0x%08x value 0x%08x"
 milkymist_memcard_memory_write(uint32_t addr, uint32_t value) "addr 0x%08x value 0x%08x"
+
+# hw/sd/pxa2xx_mmci.c
+pxa2xx_mmci_read(uint8_t size, uint32_t addr, uint32_t value) "size %d addr 0x%02x value 0x%08x"
+pxa2xx_mmci_write(uint8_t size, uint32_t addr, uint32_t value) "size %d addr 0x%02x value 0x%08x"
-- 
2.7.4

[Qemu-devel] [PULL 23/26] linux-user/arm/nwfpe: Check coprocessor number for FPA emulation

[Peter Maydell]

Our copy of the nwfpe code for emulating of the old FPA11 floating
point unit doesn't check the coprocessor number in the instruction
when it emulates it.  This means that we might treat some
instructions which should really UNDEF as being FPA11 instructions by
accident.

The kernel's copy of the nwfpe code doesn't make this error; I suspect
the bug was noticed and fixed as part of the process of mainlining
the nwfpe code more than a decade ago.

Add a check that the coprocessor number (which is always in bits
[11:8] of the instruction) is either 1 or 2, which is where the
FPA11 lives.

Reported-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 linux-user/arm/nwfpe/fpa11.c | 9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/linux-user/arm/nwfpe/fpa11.c b/linux-user/arm/nwfpe/fpa11.c
index 441e3b1..f6f8163 100644
--- a/linux-user/arm/nwfpe/fpa11.c
+++ b/linux-user/arm/nwfpe/fpa11.c
@@ -137,8 +137,17 @@ unsigned int EmulateAll(unsigned int opcode, FPA11* qfpa, CPUARMState* qregs)
   unsigned int nRc = 0;
 //  unsigned long flags;
   FPA11 *fpa11;
+  unsigned int cp;
 //  save_flags(flags); sti();
 
+  /* Check that this is really an FPA11 instruction: the coprocessor
+   * field in bits [11:8] must be 1 or 2.
+   */
+  cp = (opcode >> 8) & 0xf;
+  if (cp != 1 && cp != 2) {
+    return 0;
+  }
+
   qemufpa=qfpa;
   user_registers=qregs;
 
-- 
2.7.4

[Qemu-devel] [PULL 24/26] target/arm: Make disas_thumb2_insn() generate its own UNDEF exceptions

[Peter Maydell]

Refactor disas_thumb2_insn() so that it generates the code for raising
an UNDEF exception for invalid insns, rather than returning a flag
which the caller must check to see if it needs to generate the UNDEF
code. This brings the function in to line with the behaviour of
disas_thumb_insn() and disas_arm_insn().

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 1513080506-17703-1-git-send-email-peter.maydell@linaro.org
---
 target/arm/translate.c | 23 ++++++++++-------------
 1 file changed, 10 insertions(+), 13 deletions(-)

diff --git a/target/arm/translate.c b/target/arm/translate.c
index c690658..781be1e 100644
--- a/target/arm/translate.c
+++ b/target/arm/translate.c
@@ -9775,9 +9775,8 @@ gen_thumb2_data_op(DisasContext *s, int op, int conds, uint32_t shifter_out,
     return 0;
 }
 
-/* Translate a 32-bit thumb instruction.  Returns nonzero if the instruction
-   is not legal.  */
-static int disas_thumb2_insn(DisasContext *s, uint32_t insn)
+/* Translate a 32-bit thumb instruction. */
+static void disas_thumb2_insn(DisasContext *s, uint32_t insn)
 {
     uint32_t imm, shift, offset;
     uint32_t rd, rn, rm, rs;
@@ -11016,16 +11015,16 @@ static int disas_thumb2_insn(DisasContext *s, uint32_t insn)
                     /* UNPREDICTABLE, unallocated hint or
                      * PLD/PLDW/PLI (literal)
                      */
-                    return 0;
+                    return;
                 }
                 if (op1 & 1) {
-                    return 0; /* PLD/PLDW/PLI or unallocated hint */
+                    return; /* PLD/PLDW/PLI or unallocated hint */
                 }
                 if ((op2 == 0) || ((op2 & 0x3c) == 0x30)) {
-                    return 0; /* PLD/PLDW/PLI or unallocated hint */
+                    return; /* PLD/PLDW/PLI or unallocated hint */
                 }
                 /* UNDEF space, or an UNPREDICTABLE */
-                return 1;
+                goto illegal_op;
             }
         }
         memidx = get_mem_index(s);
@@ -11151,9 +11150,10 @@ static int disas_thumb2_insn(DisasContext *s, uint32_t insn)
     default:
         goto illegal_op;
     }
-    return 0;
+    return;
 illegal_op:
-    return 1;
+    gen_exception_insn(s, 4, EXCP_UDEF, syn_uncategorized(),
+                       default_exception_el(s));
 }
 
 static void disas_thumb_insn(DisasContext *s, uint32_t insn)
@@ -12275,10 +12275,7 @@ static void thumb_tr_translate_insn(DisasContextBase *dcbase, CPUState *cpu)
     if (is_16bit) {
         disas_thumb_insn(dc, insn);
     } else {
-        if (disas_thumb2_insn(dc, insn)) {
-            gen_exception_insn(dc, 4, EXCP_UDEF, syn_uncategorized(),
-                               default_exception_el(dc));
-        }
+        disas_thumb2_insn(dc, insn);
     }
 
     /* Advance the Thumb condexec condition.  */
-- 
2.7.4

[Qemu-devel] [PULL 25/26] hw/intc/arm_gicv3: Make reserved register addresses RAZ/WI

[Peter Maydell]

The GICv3 specification says that reserved register addresses
should RAZ/WI. This means we need to return MEMTX_OK, not MEMTX_ERROR,
because now that we support generating external aborts the
latter will cause an abort on new board models.

Cc: qemu-stable@nongnu.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1513183941-24300-2-git-send-email-peter.maydell@linaro.org
Reviewed-by: Alistair Francis <alistair.francis@xilinx.com>
---
 hw/intc/arm_gicv3_dist.c       | 13 +++++++++++++
 hw/intc/arm_gicv3_its_common.c |  8 +++-----
 hw/intc/arm_gicv3_redist.c     | 13 +++++++++++++
 3 files changed, 29 insertions(+), 5 deletions(-)

diff --git a/hw/intc/arm_gicv3_dist.c b/hw/intc/arm_gicv3_dist.c
index 3ea3dd0..93fe936 100644
--- a/hw/intc/arm_gicv3_dist.c
+++ b/hw/intc/arm_gicv3_dist.c
@@ -817,6 +817,13 @@ MemTxResult gicv3_dist_read(void *opaque, hwaddr offset, uint64_t *data,
                       "%s: invalid guest read at offset " TARGET_FMT_plx
                       "size %u\n", __func__, offset, size);
         trace_gicv3_dist_badread(offset, size, attrs.secure);
+        /* The spec requires that reserved registers are RAZ/WI;
+         * so use MEMTX_ERROR returns from leaf functions as a way to
+         * trigger the guest-error logging but don't return it to
+         * the caller, or we'll cause a spurious guest data abort.
+         */
+        r = MEMTX_OK;
+        *data = 0;
     } else {
         trace_gicv3_dist_read(offset, *data, size, attrs.secure);
     }
@@ -852,6 +859,12 @@ MemTxResult gicv3_dist_write(void *opaque, hwaddr offset, uint64_t data,
                       "%s: invalid guest write at offset " TARGET_FMT_plx
                       "size %u\n", __func__, offset, size);
         trace_gicv3_dist_badwrite(offset, data, size, attrs.secure);
+        /* The spec requires that reserved registers are RAZ/WI;
+         * so use MEMTX_ERROR returns from leaf functions as a way to
+         * trigger the guest-error logging but don't return it to
+         * the caller, or we'll cause a spurious guest data abort.
+         */
+        r = MEMTX_OK;
     } else {
         trace_gicv3_dist_write(offset, data, size, attrs.secure);
     }
diff --git a/hw/intc/arm_gicv3_its_common.c b/hw/intc/arm_gicv3_its_common.c
index 2bd2f0f..284c0a7 100644
--- a/hw/intc/arm_gicv3_its_common.c
+++ b/hw/intc/arm_gicv3_its_common.c
@@ -67,7 +67,8 @@ static MemTxResult gicv3_its_trans_read(void *opaque, hwaddr offset,
                                         MemTxAttrs attrs)
 {
     qemu_log_mask(LOG_GUEST_ERROR, "ITS read at offset 0x%"PRIx64"\n", offset);
-    return MEMTX_ERROR;
+    *data = 0;
+    return MEMTX_OK;
 }
 
 static MemTxResult gicv3_its_trans_write(void *opaque, hwaddr offset,
@@ -82,15 +83,12 @@ static MemTxResult gicv3_its_trans_write(void *opaque, hwaddr offset,
         if (ret <= 0) {
             qemu_log_mask(LOG_GUEST_ERROR,
                           "ITS: Error sending MSI: %s\n", strerror(-ret));
-            return MEMTX_DECODE_ERROR;
         }
-
-        return MEMTX_OK;
     } else {
         qemu_log_mask(LOG_GUEST_ERROR,
                       "ITS write at bad offset 0x%"PRIx64"\n", offset);
-        return MEMTX_DECODE_ERROR;
     }
+    return MEMTX_OK;
 }
 
 static const MemoryRegionOps gicv3_its_trans_ops = {
diff --git a/hw/intc/arm_gicv3_redist.c b/hw/intc/arm_gicv3_redist.c
index 77e5cfa..8a8684d 100644
--- a/hw/intc/arm_gicv3_redist.c
+++ b/hw/intc/arm_gicv3_redist.c
@@ -455,6 +455,13 @@ MemTxResult gicv3_redist_read(void *opaque, hwaddr offset, uint64_t *data,
                       "size %u\n", __func__, offset, size);
         trace_gicv3_redist_badread(gicv3_redist_affid(cs), offset,
                                    size, attrs.secure);
+        /* The spec requires that reserved registers are RAZ/WI;
+         * so use MEMTX_ERROR returns from leaf functions as a way to
+         * trigger the guest-error logging but don't return it to
+         * the caller, or we'll cause a spurious guest data abort.
+         */
+        r = MEMTX_OK;
+        *data = 0;
     } else {
         trace_gicv3_redist_read(gicv3_redist_affid(cs), offset, *data,
                                 size, attrs.secure);
@@ -505,6 +512,12 @@ MemTxResult gicv3_redist_write(void *opaque, hwaddr offset, uint64_t data,
                       "size %u\n", __func__, offset, size);
         trace_gicv3_redist_badwrite(gicv3_redist_affid(cs), offset, data,
                                     size, attrs.secure);
+        /* The spec requires that reserved registers are RAZ/WI;
+         * so use MEMTX_ERROR returns from leaf functions as a way to
+         * trigger the guest-error logging but don't return it to
+         * the caller, or we'll cause a spurious guest data abort.
+         */
+        r = MEMTX_OK;
     } else {
         trace_gicv3_redist_write(gicv3_redist_affid(cs), offset, data,
                                  size, attrs.secure);
-- 
2.7.4

[Qemu-devel] [PULL 26/26] hw/intc/arm_gic: reserved register addresses are RAZ/WI

[Peter Maydell]

The GICv2 specification says that reserved register addresses
must RAZ/WI; now that we implement external abort handling
for Arm CPUs this means we must return MEMTX_OK rather than
MEMTX_ERROR, to avoid generating a spurious guest data abort.

Cc: qemu-stable@nongnu.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1513183941-24300-3-git-send-email-peter.maydell@linaro.org
Reviewed-by: Alistair Francis <alistair.francis@xilinx.com>
---
 hw/intc/arm_gic.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/hw/intc/arm_gic.c b/hw/intc/arm_gic.c
index 5a0e2a3..d701e49 100644
--- a/hw/intc/arm_gic.c
+++ b/hw/intc/arm_gic.c
@@ -1261,7 +1261,8 @@ static MemTxResult gic_cpu_read(GICState *s, int cpu, int offset,
     default:
         qemu_log_mask(LOG_GUEST_ERROR,
                       "gic_cpu_read: Bad offset %x\n", (int)offset);
-        return MEMTX_ERROR;
+        *data = 0;
+        break;
     }
     return MEMTX_OK;
 }
@@ -1329,7 +1330,7 @@ static MemTxResult gic_cpu_write(GICState *s, int cpu, int offset,
     default:
         qemu_log_mask(LOG_GUEST_ERROR,
                       "gic_cpu_write: Bad offset %x\n", (int)offset);
-        return MEMTX_ERROR;
+        return MEMTX_OK;
     }
     gic_update(s);
     return MEMTX_OK;
-- 
2.7.4

Re: [Qemu-devel] [PULL 00/26] target-arm queue

[no-reply]

Hi,

This series seems to have some coding style problems. See output below for
more information:

Type: series
Message-id: 1515677902-23436-1-git-send-email-peter.maydell@linaro.org
Subject: [Qemu-devel] [PULL 00/26] target-arm queue

=== TEST SCRIPT BEGIN ===
#!/bin/bash

BASE=base
n=1
total=$(git log --oneline $BASE.. | wc -l)
failed=0

git config --local diff.renamelimit 0
git config --local diff.renames True

commits="$(git log --format=%H --reverse $BASE..)"
for c in $commits; do
    echo "Checking PATCH $n/$total: $(git log -n 1 --format=%s $c)..."
    if ! git show $c --format=email | ./scripts/checkpatch.pl --mailback -; then
        failed=1
        echo
    fi
    n=$((n+1))
done

exit $failed
=== TEST SCRIPT END ===

Updating 3c8cf5a9c21ff8782164d1def7f44bd888713384
Switched to a new branch 'test'
2359930d5a hw/intc/arm_gic: reserved register addresses are RAZ/WI
48694e29ed hw/intc/arm_gicv3: Make reserved register addresses RAZ/WI
676e0cb89f target/arm: Make disas_thumb2_insn() generate its own UNDEF exceptions
d25c6959f3 linux-user/arm/nwfpe: Check coprocessor number for FPA emulation
1341a890b4 hw/sd/pxa2xx_mmci: add read/write() trace events
a885104099 hw/timer/pxa2xx_timer: replace hw_error() -> qemu_log_mask()
bc0eeb50f5 imx_fec: Reserve full FSL_IMX25_FEC_SIZE page for the register file
368df2ab10 imx_fec: Fix a typo in imx_enet_receive()
5e23b9482d imx_fec: Use correct length for packet size
78340a7865 imx_fec: Add support for multiple Tx DMA rings
9149d3af96 imx_fec: Emulate SHIFT16 in ENETx_RACC
4bd1e35856 imx_fec: Use MIN instead of explicit ternary operator
518029255c imx_fec: Use ENET_FTRL to determine truncation length
bc493c7448 imx_fec: Move Tx frame buffer away from the stack
0c1827e654 imx_fec: Change queue flushing heuristics
c6d90ff752 imx_fec: Refactor imx_eth_enable_rx()
a749448e1e imx_fec: Do not link to netdev
b38e7a3b8f Virt: ACPI: fix qemu assert due to re-assigned table data address
d814544e4b target/arm: Fix stlxp for aarch64_be
3a6faeef7b linux-user: Activate armeb handler registration
8ee0d2d481 linux-user: Separate binfmt arm CPU families
951c02fe87 linux-user: Add aarch64_be magic numbers to qemu-binfmt-conf.sh
b1c1e90ee6 configure: Add aarch64_be-linux-user target
19d80bb62a linux-user: Fix endianess of aarch64 signal trampoline
cf99ea09bf linux-user: Add separate aarch64_be uname
dae5fc1bf7 linux-user: Add support for big-endian aarch64

=== OUTPUT BEGIN ===
Checking PATCH 1/26: linux-user: Add support for big-endian aarch64...
Checking PATCH 2/26: linux-user: Add separate aarch64_be uname...
Checking PATCH 3/26: linux-user: Fix endianess of aarch64 signal trampoline...
Checking PATCH 4/26: configure: Add aarch64_be-linux-user target...
Checking PATCH 5/26: linux-user: Add aarch64_be magic numbers to qemu-binfmt-conf.sh...
WARNING: line over 80 characters
#33: FILE: scripts/qemu-binfmt-conf.sh:95:
+aarch64_be_magic='\x7fELF\x02\x02\x01\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x02\x00\xb7'

ERROR: line over 90 characters
#34: FILE: scripts/qemu-binfmt-conf.sh:96:
+aarch64_be_mask='\xff\xff\xff\xff\xff\xff\xff\x00\xff\xff\xff\xff\xff\xff\xff\xff\xff\xfe\xff\xff'

total: 1 errors, 1 warnings, 18 lines checked

Your patch has style problems, please review.  If any of these errors
are false positives report them to the maintainer, see
CHECKPATCH in MAINTAINERS.

Checking PATCH 6/26: linux-user: Separate binfmt arm CPU families...
Checking PATCH 7/26: linux-user: Activate armeb handler registration...
Checking PATCH 8/26: target/arm: Fix stlxp for aarch64_be...
Checking PATCH 9/26: Virt: ACPI: fix qemu assert due to re-assigned table data address...
Checking PATCH 10/26: imx_fec: Do not link to netdev...
Checking PATCH 11/26: imx_fec: Refactor imx_eth_enable_rx()...
Checking PATCH 12/26: imx_fec: Change queue flushing heuristics...
Checking PATCH 13/26: imx_fec: Move Tx frame buffer away from the stack...
Checking PATCH 14/26: imx_fec: Use ENET_FTRL to determine truncation length...
Checking PATCH 15/26: imx_fec: Use MIN instead of explicit ternary operator...
Checking PATCH 16/26: imx_fec: Emulate SHIFT16 in ENETx_RACC...
Checking PATCH 17/26: imx_fec: Add support for multiple Tx DMA rings...
Checking PATCH 18/26: imx_fec: Use correct length for packet size...
Checking PATCH 19/26: imx_fec: Fix a typo in imx_enet_receive()...
Checking PATCH 20/26: imx_fec: Reserve full FSL_IMX25_FEC_SIZE page for the register file...
Checking PATCH 21/26: hw/timer/pxa2xx_timer: replace hw_error() -> qemu_log_mask()...
Checking PATCH 22/26: hw/sd/pxa2xx_mmci: add read/write() trace events...
Checking PATCH 23/26: linux-user/arm/nwfpe: Check coprocessor number for FPA emulation...
Checking PATCH 24/26: target/arm: Make disas_thumb2_insn() generate its own UNDEF exceptions...
Checking PATCH 25/26: hw/intc/arm_gicv3: Make reserved register addresses RAZ/WI...
Checking PATCH 26/26: hw/intc/arm_gic: reserved register addresses are RAZ/WI...
=== OUTPUT END ===

Test command exited with code: 1


---
Email generated automatically by Patchew [http://patchew.org/].
Please send your feedback to patchew-devel@freelists.org

Re: [Qemu-devel] [PULL 00/26] target-arm queue

[Peter Maydell]

On 11 January 2018 at 13:37, Peter Maydell <peter.maydell@linaro.org> wrote:
> ARM queue, various patches accumulated over the Christmas break.
>
> -- PMM
>
> The following changes since commit 612061b277915fadd80631eb7a6926f48a110c44:
>
>   Merge remote-tracking branch 'remotes/ericb/tags/pull-nbd-2018-01-10' into staging (2018-01-11 11:52:40 +0000)
>
> are available in the git repository at:
>
>   git://git.linaro.org/people/pmaydell/qemu-arm.git tags/pull-target-arm-20180111
>
> for you to fetch changes up to 0cf09852015e47a5fbb974ff7ac320366afd21ee:
>
>   hw/intc/arm_gic: reserved register addresses are RAZ/WI (2018-01-11 13:25:40 +0000)
>
> ----------------------------------------------------------------

Applied, thanks.

-- PMM

Re: [Qemu-devel] [PULL 00/26] target-arm queue

[no-reply]

Patchew URL: https://patchew.org/QEMU/20190128181047.20781-1-peter.maydell@linaro.org/



Hi,

This series failed the docker-mingw@fedora build test. Please find the testing commands and
their output below. If you have Docker installed, you can probably reproduce it
locally.

=== TEST SCRIPT BEGIN ===
#!/bin/bash
time make docker-test-mingw@fedora SHOW_ENV=1 J=14
=== TEST SCRIPT END ===

Configure options:
--enable-werror --target-list=x86_64-softmmu,aarch64-softmmu --prefix=/tmp/qemu-test/install --python=/usr/bin/python3 --cross-prefix=x86_64-w64-mingw32- --enable-trace-backends=simple --enable-gnutls --enable-nettle --enable-curl --enable-vnc --enable-bzip2 --enable-guest-agent --with-sdlabi=2.0

ERROR: "x86_64-w64-mingw32-gcc" either does not exist or does not work

# QEMU configure log Fri Feb  1 12:51:18 UTC 2019
# Configured with: '/tmp/qemu-test/src/configure' '--enable-werror' '--target-list=x86_64-softmmu,aarch64-softmmu' '--prefix=/tmp/qemu-test/install' '--python=/usr/bin/python3' '--cross-prefix=x86_64-w64-mingw32-' '--enable-trace-backends=simple' '--enable-gnutls' '--enable-nettle' '--enable-curl' '--enable-vnc' '--enable-bzip2' '--enable-guest-agent' '--with-sdlabi=2.0'
---
funcs: do_compiler do_cc compile_object check_define main
lines: 92 122 619 636 0
x86_64-w64-mingw32-gcc -D_GNU_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -Wstrict-prototypes -Wredundant-decls -Wall -Wundef -Wwrite-strings -Wmissing-prototypes -fno-strict-aliasing -fno-common -fwrapv -std=gnu99 -c -o config-temp/qemu-conf.o config-temp/qemu-conf.c
ccache: error: Failed to create temporary file for /var/tmp/ccache/tmp/qemu-conf.stdout: Permission denied

funcs: do_compiler do_cc compile_object check_define main
lines: 92 122 619 638 0
x86_64-w64-mingw32-gcc -D_GNU_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -Wstrict-prototypes -Wredundant-decls -Wall -Wundef -Wwrite-strings -Wmissing-prototypes -fno-strict-aliasing -fno-common -fwrapv -std=gnu99 -c -o config-temp/qemu-conf.o config-temp/qemu-conf.c
ccache: error: Failed to create temporary file for /var/tmp/ccache/tmp/qemu-conf.stdout: Permission denied

funcs: do_compiler do_cc compile_object check_define main
lines: 92 122 619 640 0
x86_64-w64-mingw32-gcc -D_GNU_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -Wstrict-prototypes -Wredundant-decls -Wall -Wundef -Wwrite-strings -Wmissing-prototypes -fno-strict-aliasing -fno-common -fwrapv -std=gnu99 -c -o config-temp/qemu-conf.o config-temp/qemu-conf.c
ccache: error: Failed to create temporary file for /var/tmp/ccache/tmp/qemu-conf.stdout: Permission denied

funcs: do_compiler do_cc compile_object check_define main
lines: 92 122 619 642 0
x86_64-w64-mingw32-gcc -D_GNU_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -Wstrict-prototypes -Wredundant-decls -Wall -Wundef -Wwrite-strings -Wmissing-prototypes -fno-strict-aliasing -fno-common -fwrapv -std=gnu99 -c -o config-temp/qemu-conf.o config-temp/qemu-conf.c
ccache: error: Failed to create temporary file for /var/tmp/ccache/tmp/qemu-conf.stdout: Permission denied

funcs: do_compiler do_cc compile_object check_define main
lines: 92 122 619 644 0
x86_64-w64-mingw32-gcc -D_GNU_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -Wstrict-prototypes -Wredundant-decls -Wall -Wundef -Wwrite-strings -Wmissing-prototypes -fno-strict-aliasing -fno-common -fwrapv -std=gnu99 -c -o config-temp/qemu-conf.o config-temp/qemu-conf.c
ccache: error: Failed to create temporary file for /var/tmp/ccache/tmp/qemu-conf.stdout: Permission denied

funcs: do_compiler do_cc compile_object check_define main
lines: 92 122 619 646 0
x86_64-w64-mingw32-gcc -D_GNU_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -Wstrict-prototypes -Wredundant-decls -Wall -Wundef -Wwrite-strings -Wmissing-prototypes -fno-strict-aliasing -fno-common -fwrapv -std=gnu99 -c -o config-temp/qemu-conf.o config-temp/qemu-conf.c
ccache: error: Failed to create temporary file for /var/tmp/ccache/tmp/qemu-conf.stdout: Permission denied

funcs: do_compiler do_cc compile_object check_define main
lines: 92 122 619 648 0
x86_64-w64-mingw32-gcc -D_GNU_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -Wstrict-prototypes -Wredundant-decls -Wall -Wundef -Wwrite-strings -Wmissing-prototypes -fno-strict-aliasing -fno-common -fwrapv -std=gnu99 -c -o config-temp/qemu-conf.o config-temp/qemu-conf.c
ccache: error: Failed to create temporary file for /var/tmp/ccache/tmp/qemu-conf.stdout: Permission denied

funcs: do_compiler do_cc compile_object check_define main
lines: 92 122 619 650 0
x86_64-w64-mingw32-gcc -D_GNU_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -Wstrict-prototypes -Wredundant-decls -Wall -Wundef -Wwrite-strings -Wmissing-prototypes -fno-strict-aliasing -fno-common -fwrapv -std=gnu99 -c -o config-temp/qemu-conf.o config-temp/qemu-conf.c
ccache: error: Failed to create temporary file for /var/tmp/ccache/tmp/qemu-conf.stdout: Permission denied

funcs: do_compiler do_cc compile_object check_define main
lines: 92 122 619 652 0
x86_64-w64-mingw32-gcc -D_GNU_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -Wstrict-prototypes -Wredundant-decls -Wall -Wundef -Wwrite-strings -Wmissing-prototypes -fno-strict-aliasing -fno-common -fwrapv -std=gnu99 -c -o config-temp/qemu-conf.o config-temp/qemu-conf.c
ccache: error: Failed to create temporary file for /var/tmp/ccache/tmp/qemu-conf.stdout: Permission denied

funcs: do_compiler do_cc compile_object check_define main
lines: 92 122 619 654 0
x86_64-w64-mingw32-gcc -D_GNU_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -Wstrict-prototypes -Wredundant-decls -Wall -Wundef -Wwrite-strings -Wmissing-prototypes -fno-strict-aliasing -fno-common -fwrapv -std=gnu99 -c -o config-temp/qemu-conf.o config-temp/qemu-conf.c
ccache: error: Failed to create temporary file for /var/tmp/ccache/tmp/qemu-conf.stdout: Permission denied

funcs: do_compiler do_cc compile_object check_define main
lines: 92 122 619 688 0
x86_64-w64-mingw32-gcc -D_GNU_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -Wstrict-prototypes -Wredundant-decls -Wall -Wundef -Wwrite-strings -Wmissing-prototypes -fno-strict-aliasing -fno-common -fwrapv -std=gnu99 -c -o config-temp/qemu-conf.o config-temp/qemu-conf.c
ccache: error: Failed to create temporary file for /var/tmp/ccache/tmp/qemu-conf.stdout: Permission denied

funcs: do_compiler do_cc compile_object check_define main
lines: 92 122 619 690 0
x86_64-w64-mingw32-gcc -D_GNU_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -Wstrict-prototypes -Wredundant-decls -Wall -Wundef -Wwrite-strings -Wmissing-prototypes -fno-strict-aliasing -fno-common -fwrapv -std=gnu99 -c -o config-temp/qemu-conf.o config-temp/qemu-conf.c
ccache: error: Failed to create temporary file for /var/tmp/ccache/tmp/qemu-conf.stdout: Permission denied

funcs: do_compiler do_cc compile_object check_define main
lines: 92 122 619 696 0
x86_64-w64-mingw32-gcc -D_GNU_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -Wstrict-prototypes -Wredundant-decls -Wall -Wundef -Wwrite-strings -Wmissing-prototypes -fno-strict-aliasing -fno-common -fwrapv -std=gnu99 -c -o config-temp/qemu-conf.o config-temp/qemu-conf.c
ccache: error: Failed to create temporary file for /var/tmp/ccache/tmp/qemu-conf.stdout: Permission denied

funcs: do_compiler do_cc compile_object check_define main
lines: 92 122 619 702 0
x86_64-w64-mingw32-gcc -D_GNU_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -Wstrict-prototypes -Wredundant-decls -Wall -Wundef -Wwrite-strings -Wmissing-prototypes -fno-strict-aliasing -fno-common -fwrapv -std=gnu99 -c -o config-temp/qemu-conf.o config-temp/qemu-conf.c
ccache: error: Failed to create temporary file for /var/tmp/ccache/tmp/qemu-conf.stdout: Permission denied

funcs: do_compiler do_cc compile_object check_define main
lines: 92 122 619 708 0
x86_64-w64-mingw32-gcc -D_GNU_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -Wstrict-prototypes -Wredundant-decls -Wall -Wundef -Wwrite-strings -Wmissing-prototypes -fno-strict-aliasing -fno-common -fwrapv -std=gnu99 -c -o config-temp/qemu-conf.o config-temp/qemu-conf.c
ccache: error: Failed to create temporary file for /var/tmp/ccache/tmp/qemu-conf.stdout: Permission denied

funcs: do_compiler do_cc compile_object check_define main
lines: 92 122 619 710 0
x86_64-w64-mingw32-gcc -D_GNU_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -Wstrict-prototypes -Wredundant-decls -Wall -Wundef -Wwrite-strings -Wmissing-prototypes -fno-strict-aliasing -fno-common -fwrapv -std=gnu99 -c -o config-temp/qemu-conf.o config-temp/qemu-conf.c
ccache: error: Failed to create temporary file for /var/tmp/ccache/tmp/qemu-conf.stdout: Permission denied

funcs: do_compiler do_cc compile_object check_define main
lines: 92 122 619 716 0
x86_64-w64-mingw32-gcc -D_GNU_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -Wstrict-prototypes -Wredundant-decls -Wall -Wundef -Wwrite-strings -Wmissing-prototypes -fno-strict-aliasing -fno-common -fwrapv -std=gnu99 -c -o config-temp/qemu-conf.o config-temp/qemu-conf.c
ccache: error: Failed to create temporary file for /var/tmp/ccache/tmp/qemu-conf.stdout: Permission denied

funcs: do_compiler do_cc compile_object check_define main
lines: 92 122 619 722 0
x86_64-w64-mingw32-gcc -D_GNU_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -Wstrict-prototypes -Wredundant-decls -Wall -Wundef -Wwrite-strings -Wmissing-prototypes -fno-strict-aliasing -fno-common -fwrapv -std=gnu99 -c -o config-temp/qemu-conf.o config-temp/qemu-conf.c
ccache: error: Failed to create temporary file for /var/tmp/ccache/tmp/qemu-conf.stdout: Permission denied

funcs: do_compiler do_cc compile_object check_define main
lines: 92 122 619 724 0
x86_64-w64-mingw32-gcc -D_GNU_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -Wstrict-prototypes -Wredundant-decls -Wall -Wundef -Wwrite-strings -Wmissing-prototypes -fno-strict-aliasing -fno-common -fwrapv -std=gnu99 -c -o config-temp/qemu-conf.o config-temp/qemu-conf.c
ccache: error: Failed to create temporary file for /var/tmp/ccache/tmp/qemu-conf.stdout: Permission denied

funcs: do_compiler do_cc compile_object main
lines: 92 122 1820 0
x86_64-w64-mingw32-gcc -m64 -mcx16 -D_GNU_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -Wstrict-prototypes -Wredundant-decls -Wall -Wundef -Wwrite-strings -Wmissing-prototypes -fno-strict-aliasing -fno-common -fwrapv -std=gnu99 -c -o config-temp/qemu-conf.o config-temp/qemu-conf.c
ccache: error: Failed to create temporary file for /var/tmp/ccache/tmp/qemu-conf.stdout: Permission denied
Failed to run 'configure'
Traceback (most recent call last):
  File "./tests/docker/docker.py", line 563, in <module>


The full log is available at
http://patchew.org/logs/20190128181047.20781-1-peter.maydell@linaro.org/testing.docker-mingw@fedora/?type=message.
---
Email generated automatically by Patchew [http://patchew.org/].
Please send your feedback to patchew-devel@redhat.com

[Qemu-devel] [PULL 00/26] target-arm queue

[Peter Maydell]

Arm queue. I'll probably end up doing another later this week.

thanks
-- PMM

The following changes since commit 5f39a91dbd9a186edb999afd4d17524f4b1da14f:

  Merge remote-tracking branch 'remotes/jnsnow/tags/ide-pull-request' into staging (2019-01-28 12:54:06 +0000)

are available in the Git repository at:

  https://git.linaro.org/people/pmaydell/qemu-arm.git tags/pull-target-arm-20190128

for you to fetch changes up to dc192cb2d851c51ebd8d8e1a3b6b14ce9d16efc7:

  gdbstub: Simplify gdb_get_cpu_pid() to use cpu->cluster_index (2019-01-28 18:03:16 +0000)

----------------------------------------------------------------
target-arm queue:
 * Fix validation of 32-bit address spaces for aa32 (fixes an assert introduced in ba97be9f4a4)
 * v8m: Ensure IDAU is respected if SAU is disabled
 * gdbstub: fix gdb_get_cpu(s, pid, tid) when pid and/or tid are 0
 * exec.c: Use correct attrs in cpu_memory_rw_debug()
 * accel/tcg/user-exec: Don't parse aarch64 insns to test for read vs write
 * target/arm: Don't clear supported PMU events when initializing PMCEID1
 * memory: add memory_region_flush_rom_device()
 * microbit: Add nRF51 non-volatile memories
 * microbit: Add stub NRF51 TWI magnetometer/accelerometer detection
 * tests/microbit-test: extend testing of microbit devices
 * checkpatch: Don't emit spurious warnings about block comments
 * aspeed/smc: misc bug fixes
 * xlnx-zynqmp: Don't create rpu-cluster if there are no RPUs
 * xlnx-zynqmp: Realize cluster after putting RPUs in it
 * accel/tcg: Add cluster number to TCG TB hash so differently configured
   CPUs don't pick up cached TBs for the wrong kind of CPU

----------------------------------------------------------------
Aaron Lindsay OS (1):
      target/arm: Don't clear supported PMU events when initializing PMCEID1

Cédric Le Goater (4):
      aspeed/smc: fix default read value
      aspeed/smc: define registers for all possible CS
      aspeed/smc: Add dummy data register
      aspeed/smc: snoop SPI transfers to fake dummy cycles

Julia Suvorova (3):
      tests/libqtest: Introduce qtest_init_with_serial()
      tests/microbit-test: Make test independent of global_qtest
      tests/microbit-test: Check nRF51 UART functionality

Luc Michel (1):
      gdbstub: fix gdb_get_cpu(s, pid, tid) when pid and/or tid are 0

Peter Maydell (8):
      exec.c: Use correct attrs in cpu_memory_rw_debug()
      accel/tcg/user-exec: Don't parse aarch64 insns to test for read vs write
      checkpatch: Don't emit spurious warnings about block comments
      xlnx-zynqmp: Don't create rpu-cluster if there are no RPUs
      hw/arm/xlnx-zynqmp: Realize cluster after putting RPUs in it
      qom/cpu: Add cluster_index to CPUState
      accel/tcg: Add cluster number to TCG TB hash
      gdbstub: Simplify gdb_get_cpu_pid() to use cpu->cluster_index

Richard Henderson (1):
      target/arm: Fix validation of 32-bit address spaces for aa32

Stefan Hajnoczi (3):
      tests/microbit-test: add TWI stub device test
      MAINTAINERS: update microbit ARM board files
      memory: add memory_region_flush_rom_device()

Steffen Görtz (4):
      arm: Stub out NRF51 TWI magnetometer/accelerometer detection
      hw/nvram/nrf51_nvm: Add nRF51 non-volatile memories
      arm: Instantiate NRF51 special NVM's and NVMC
      tests/microbit-test: Add tests for nRF51 NVMC

Thomas Roth (1):
      target/arm: v8m: Ensure IDAU is respected if SAU is disabled

 hw/i2c/Makefile.objs          |   1 +
 hw/nvram/Makefile.objs        |   1 +
 include/exec/exec-all.h       |   4 +-
 include/exec/memory.h         |  18 ++
 include/hw/arm/nrf51.h        |   2 +
 include/hw/arm/nrf51_soc.h    |   3 +
 include/hw/cpu/cluster.h      |  24 +++
 include/hw/i2c/microbit_i2c.h |  42 ++++
 include/hw/nvram/nrf51_nvm.h  |  64 ++++++
 include/hw/ssi/aspeed_smc.h   |   3 +
 include/qom/cpu.h             |   7 +
 target/arm/cpu.h              |  11 +-
 tests/libqtest.h              |  11 +
 accel/tcg/cpu-exec.c          |   3 +
 accel/tcg/translate-all.c     |   3 +
 accel/tcg/user-exec.c         |  66 ++++--
 exec.c                        |  19 +-
 gdbstub.c                     | 120 +++++------
 hw/arm/microbit.c             |  16 ++
 hw/arm/nrf51_soc.c            |  41 ++--
 hw/arm/xlnx-zynqmp.c          |   9 +-
 hw/cpu/cluster.c              |  46 +++++
 hw/i2c/microbit_i2c.c         | 127 ++++++++++++
 hw/nvram/nrf51_nvm.c          | 381 +++++++++++++++++++++++++++++++++++
 hw/ssi/aspeed_smc.c           | 128 +++++++++++-
 qom/cpu.c                     |   1 +
 target/arm/cpu.c              |   3 +-
 target/arm/helper.c           |  67 +++---
 tests/libqtest.c              |  25 +++
 tests/microbit-test.c         | 458 ++++++++++++++++++++++++++++++++----------
 MAINTAINERS                   |   8 +-
 scripts/checkpatch.pl         |   2 +-
 32 files changed, 1459 insertions(+), 255 deletions(-)
 create mode 100644 include/hw/i2c/microbit_i2c.h
 create mode 100644 include/hw/nvram/nrf51_nvm.h
 create mode 100644 hw/i2c/microbit_i2c.c
 create mode 100644 hw/nvram/nrf51_nvm.c