* [PATCH 1/8] wil6210: add Talyn PCIe device ID
2018-01-19 15:36 [PATCH 0/8] wil6210 patches Maya Erez
@ 2018-01-19 15:36 ` Maya Erez
2018-01-19 15:36 ` [PATCH 2/8] wil6210: recognize Talyn JTAG ID Maya Erez
` (6 subsequent siblings)
7 siblings, 0 replies; 9+ messages in thread
From: Maya Erez @ 2018-01-19 15:36 UTC (permalink / raw)
To: Kalle Valo; +Cc: Maya Erez, linux-wireless, wil6210, Maya Erez
PCIe device ID has changed in Talyn.
Add this ID to wil6210_pcie_ids list to allow
recognition of Talyn device.
Signed-off-by: Maya Erez <merez@codeaurora.org>
---
drivers/net/wireless/ath/wil6210/pcie_bus.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/net/wireless/ath/wil6210/pcie_bus.c b/drivers/net/wireless/ath/wil6210/pcie_bus.c
index 0c401bf..f8c7a6b 100644
--- a/drivers/net/wireless/ath/wil6210/pcie_bus.c
+++ b/drivers/net/wireless/ath/wil6210/pcie_bus.c
@@ -1,5 +1,6 @@
/*
* Copyright (c) 2012-2017 Qualcomm Atheros, Inc.
+ * Copyright (c) 2018, The Linux Foundation. All rights reserved.
*
* Permission to use, copy, modify, and/or distribute this software for any
* purpose with or without fee is hereby granted, provided that the above
@@ -378,6 +379,7 @@ static void wil_pcie_remove(struct pci_dev *pdev)
static const struct pci_device_id wil6210_pcie_ids[] = {
{ PCI_DEVICE(0x1ae9, 0x0310) },
{ PCI_DEVICE(0x1ae9, 0x0302) }, /* same as above, firmware broken */
+ { PCI_DEVICE(0x17cb, 0x1201) }, /* Talyn */
{ /* end: all zeroes */ },
};
MODULE_DEVICE_TABLE(pci, wil6210_pcie_ids);
--
1.9.1
^ permalink raw reply related [flat|nested] 9+ messages in thread* [PATCH 2/8] wil6210: recognize Talyn JTAG ID
2018-01-19 15:36 [PATCH 0/8] wil6210 patches Maya Erez
2018-01-19 15:36 ` [PATCH 1/8] wil6210: add Talyn PCIe device ID Maya Erez
@ 2018-01-19 15:36 ` Maya Erez
2018-01-19 15:36 ` [PATCH 3/8] wil6210: add support for Talyn AHB address map Maya Erez
` (5 subsequent siblings)
7 siblings, 0 replies; 9+ messages in thread
From: Maya Erez @ 2018-01-19 15:36 UTC (permalink / raw)
To: Kalle Valo; +Cc: Maya Erez, linux-wireless, wil6210, Maya Erez
Add Talyn JTAG ID to the list of valid IDs
and identify this device as Talyn.
Signed-off-by: Maya Erez <merez@codeaurora.org>
---
drivers/net/wireless/ath/wil6210/pcie_bus.c | 4 ++++
drivers/net/wireless/ath/wil6210/wil6210.h | 3 +++
2 files changed, 7 insertions(+)
diff --git a/drivers/net/wireless/ath/wil6210/pcie_bus.c b/drivers/net/wireless/ath/wil6210/pcie_bus.c
index f8c7a6b..2b3b1f7 100644
--- a/drivers/net/wireless/ath/wil6210/pcie_bus.c
+++ b/drivers/net/wireless/ath/wil6210/pcie_bus.c
@@ -73,6 +73,10 @@ void wil_set_capabilities(struct wil6210_priv *wil)
break;
}
break;
+ case JTAG_DEV_ID_TALYN:
+ wil->hw_name = "Talyn";
+ wil->hw_version = HW_VER_TALYN;
+ break;
default:
wil_err(wil, "Unknown board hardware, chip_id 0x%08x, chip_revision 0x%08x\n",
jtag_id, chip_revision);
diff --git a/drivers/net/wireless/ath/wil6210/wil6210.h b/drivers/net/wireless/ath/wil6210/wil6210.h
index 0a0766b..a59a553 100644
--- a/drivers/net/wireless/ath/wil6210/wil6210.h
+++ b/drivers/net/wireless/ath/wil6210/wil6210.h
@@ -1,5 +1,6 @@
/*
* Copyright (c) 2012-2017 Qualcomm Atheros, Inc.
+ * Copyright (c) 2018, The Linux Foundation. All rights reserved.
*
* Permission to use, copy, modify, and/or distribute this software for any
* purpose with or without fee is hereby granted, provided that the above
@@ -286,6 +287,7 @@ struct RGF_ICR {
#define RGF_USER_JTAG_DEV_ID (0x880b34) /* device ID */
#define JTAG_DEV_ID_SPARROW (0x2632072f)
+ #define JTAG_DEV_ID_TALYN (0x7e0e1)
#define RGF_USER_REVISION_ID (0x88afe4)
#define RGF_USER_REVISION_ID_MASK (3)
@@ -300,6 +302,7 @@ enum {
HW_VER_UNKNOWN,
HW_VER_SPARROW_B0, /* REVISION_ID_SPARROW_B0 */
HW_VER_SPARROW_D0, /* REVISION_ID_SPARROW_D0 */
+ HW_VER_TALYN, /* JTAG_DEV_ID_TALYN */
};
/* popular locations */
--
1.9.1
^ permalink raw reply related [flat|nested] 9+ messages in thread* [PATCH 3/8] wil6210: add support for Talyn AHB address map
2018-01-19 15:36 [PATCH 0/8] wil6210 patches Maya Erez
2018-01-19 15:36 ` [PATCH 1/8] wil6210: add Talyn PCIe device ID Maya Erez
2018-01-19 15:36 ` [PATCH 2/8] wil6210: recognize Talyn JTAG ID Maya Erez
@ 2018-01-19 15:36 ` Maya Erez
2018-01-19 15:37 ` [PATCH 4/8] wil6210: support flashless device Maya Erez
` (4 subsequent siblings)
7 siblings, 0 replies; 9+ messages in thread
From: Maya Erez @ 2018-01-19 15:36 UTC (permalink / raw)
To: Kalle Valo; +Cc: Maya Erez, linux-wireless, wil6210, Maya Erez, Dedy Lansky
Talyn memory has changed, areas were increased and shifted
to new locations.
Use the appropriate address map according to the device JTAG ID.
Signed-off-by: Dedy Lansky <dlansky@codeaurora.org>
Signed-off-by: Maya Erez <merez@codeaurora.org>
---
drivers/net/wireless/ath/wil6210/interrupt.c | 6 ++-
drivers/net/wireless/ath/wil6210/pcie_bus.c | 18 +++++++-
drivers/net/wireless/ath/wil6210/wil6210.h | 21 +++++++--
drivers/net/wireless/ath/wil6210/wmi.c | 64 ++++++++++++++++++++++++----
4 files changed, 92 insertions(+), 17 deletions(-)
diff --git a/drivers/net/wireless/ath/wil6210/interrupt.c b/drivers/net/wireless/ath/wil6210/interrupt.c
index dcf87a7..1835187 100644
--- a/drivers/net/wireless/ath/wil6210/interrupt.c
+++ b/drivers/net/wireless/ath/wil6210/interrupt.c
@@ -1,5 +1,6 @@
/*
* Copyright (c) 2012-2017 Qualcomm Atheros, Inc.
+ * Copyright (c) 2018, The Linux Foundation. All rights reserved.
*
* Permission to use, copy, modify, and/or distribute this software for any
* purpose with or without fee is hereby granted, provided that the above
@@ -395,8 +396,9 @@ static irqreturn_t wil6210_irq_misc(int irq, void *cookie)
wil6210_mask_irq_misc(wil, false);
if (isr & ISR_MISC_FW_ERROR) {
- u32 fw_assert_code = wil_r(wil, RGF_FW_ASSERT_CODE);
- u32 ucode_assert_code = wil_r(wil, RGF_UCODE_ASSERT_CODE);
+ u32 fw_assert_code = wil_r(wil, wil->rgf_fw_assert_code_addr);
+ u32 ucode_assert_code =
+ wil_r(wil, wil->rgf_ucode_assert_code_addr);
wil_err(wil,
"Firmware error detected, assert codes FW 0x%08x, UCODE 0x%08x\n",
diff --git a/drivers/net/wireless/ath/wil6210/pcie_bus.c b/drivers/net/wireless/ath/wil6210/pcie_bus.c
index 2b3b1f7..6b153fe 100644
--- a/drivers/net/wireless/ath/wil6210/pcie_bus.c
+++ b/drivers/net/wireless/ath/wil6210/pcie_bus.c
@@ -36,7 +36,7 @@ static int wil6210_pm_notify(struct notifier_block *notify_block,
unsigned long mode, void *unused);
static
-void wil_set_capabilities(struct wil6210_priv *wil)
+int wil_set_capabilities(struct wil6210_priv *wil)
{
const char *wil_fw_name;
u32 jtag_id = wil_r(wil, RGF_USER_JTAG_DEV_ID);
@@ -72,16 +72,24 @@ void wil_set_capabilities(struct wil6210_priv *wil)
wil->hw_version = HW_VER_UNKNOWN;
break;
}
+ memcpy(fw_mapping, sparrow_fw_mapping,
+ sizeof(sparrow_fw_mapping));
+ wil->rgf_fw_assert_code_addr = SPARROW_RGF_FW_ASSERT_CODE;
+ wil->rgf_ucode_assert_code_addr = SPARROW_RGF_UCODE_ASSERT_CODE;
break;
case JTAG_DEV_ID_TALYN:
wil->hw_name = "Talyn";
wil->hw_version = HW_VER_TALYN;
+ memcpy(fw_mapping, talyn_fw_mapping, sizeof(talyn_fw_mapping));
+ wil->rgf_fw_assert_code_addr = TALYN_RGF_FW_ASSERT_CODE;
+ wil->rgf_ucode_assert_code_addr = TALYN_RGF_UCODE_ASSERT_CODE;
break;
default:
wil_err(wil, "Unknown board hardware, chip_id 0x%08x, chip_revision 0x%08x\n",
jtag_id, chip_revision);
wil->hw_name = "Unknown";
wil->hw_version = HW_VER_UNKNOWN;
+ return -EINVAL;
}
wil_info(wil, "Board hardware is %s\n", wil->hw_name);
@@ -97,6 +105,8 @@ void wil_set_capabilities(struct wil6210_priv *wil)
/* extract FW capabilities from file without loading the FW */
wil_request_firmware(wil, wil->wil_fw_name, false);
wil_refresh_fw_capabilities(wil);
+
+ return 0;
}
void wil_disable_irq(struct wil6210_priv *wil)
@@ -307,7 +317,11 @@ static int wil_pcie_probe(struct pci_dev *pdev, const struct pci_device_id *id)
/* rollback to err_iounmap */
wil_info(wil, "CSR at %pR -> 0x%p\n", &pdev->resource[0], wil->csr);
- wil_set_capabilities(wil);
+ rc = wil_set_capabilities(wil);
+ if (rc) {
+ wil_err(wil, "wil_set_capabilities failed, rc %d\n", rc);
+ goto err_iounmap;
+ }
wil6210_clear_irq(wil);
/* FW should raise IRQ when ready */
diff --git a/drivers/net/wireless/ath/wil6210/wil6210.h b/drivers/net/wireless/ath/wil6210/wil6210.h
index a59a553..79356bb 100644
--- a/drivers/net/wireless/ath/wil6210/wil6210.h
+++ b/drivers/net/wireless/ath/wil6210/wil6210.h
@@ -295,8 +295,12 @@ struct RGF_ICR {
#define REVISION_ID_SPARROW_D0 (0x3)
/* crash codes for FW/Ucode stored here */
-#define RGF_FW_ASSERT_CODE (0x91f020)
-#define RGF_UCODE_ASSERT_CODE (0x91f028)
+
+/* ASSERT RGFs */
+#define SPARROW_RGF_FW_ASSERT_CODE (0x91f020)
+#define SPARROW_RGF_UCODE_ASSERT_CODE (0x91f028)
+#define TALYN_RGF_FW_ASSERT_CODE (0xa37020)
+#define TALYN_RGF_UCODE_ASSERT_CODE (0xa37028)
enum {
HW_VER_UNKNOWN,
@@ -318,6 +322,10 @@ enum {
#define WIL_DATA_COMPLETION_TO_MS 200
/* Hardware definitions end */
+#define SPARROW_FW_MAPPING_TABLE_SIZE 10
+#define TALYN_FW_MAPPING_TABLE_SIZE 13
+#define MAX_FW_MAPPING_TABLE_SIZE 13
+
struct fw_map {
u32 from; /* linker address - from, inclusive */
u32 to; /* linker address - to, exclusive */
@@ -327,7 +335,9 @@ struct fw_map {
};
/* array size should be in sync with actual definition in the wmi.c */
-extern const struct fw_map fw_mapping[10];
+extern const struct fw_map sparrow_fw_mapping[SPARROW_FW_MAPPING_TABLE_SIZE];
+extern const struct fw_map talyn_fw_mapping[TALYN_FW_MAPPING_TABLE_SIZE];
+extern struct fw_map fw_mapping[MAX_FW_MAPPING_TABLE_SIZE];
/**
* mk_cidxtid - construct @cidxtid field
@@ -723,7 +733,7 @@ struct wil6210_priv {
atomic_t isr_count_rx, isr_count_tx;
/* debugfs */
struct dentry *debug;
- struct wil_blob_wrapper blobs[ARRAY_SIZE(fw_mapping)];
+ struct wil_blob_wrapper blobs[MAX_FW_MAPPING_TABLE_SIZE];
u8 discovery_mode;
u8 abft_len;
u8 wakeup_trigger;
@@ -758,6 +768,9 @@ struct wil6210_priv {
bool suspend_resp_comp;
u32 bus_request_kbps;
u32 bus_request_kbps_pre_suspend;
+
+ u32 rgf_fw_assert_code_addr;
+ u32 rgf_ucode_assert_code_addr;
};
#define wil_to_wiphy(i) (i->wdev->wiphy)
diff --git a/drivers/net/wireless/ath/wil6210/wmi.c b/drivers/net/wireless/ath/wil6210/wmi.c
index 2ab71bb..69da3c2 100644
--- a/drivers/net/wireless/ath/wil6210/wmi.c
+++ b/drivers/net/wireless/ath/wil6210/wmi.c
@@ -1,5 +1,6 @@
/*
* Copyright (c) 2012-2017 Qualcomm Atheros, Inc.
+ * Copyright (c) 2018, The Linux Foundation. All rights reserved.
*
* Permission to use, copy, modify, and/or distribute this software for any
* purpose with or without fee is hereby granted, provided that the above
@@ -70,23 +71,23 @@
* On the PCI bus, there is one BAR (BAR0) of 2Mb size, exposing
* AHB addresses starting from 0x880000
*
- * Internally, firmware uses addresses that allows faster access but
+ * Internally, firmware uses addresses that allow faster access but
* are invisible from the host. To read from these addresses, alternative
* AHB address must be used.
- *
- * Memory mapping
- * Linker address PCI/Host address
- * 0x880000 .. 0xa80000 2Mb BAR0
- * 0x800000 .. 0x807000 0x900000 .. 0x907000 28k DCCM
- * 0x840000 .. 0x857000 0x908000 .. 0x91f000 92k PERIPH
*/
/**
- * @fw_mapping provides memory remapping table
+ * @sparrow_fw_mapping provides memory remapping table for sparrow
*
* array size should be in sync with the declaration in the wil6210.h
+ *
+ * Sparrow memory mapping:
+ * Linker address PCI/Host address
+ * 0x880000 .. 0xa80000 2Mb BAR0
+ * 0x800000 .. 0x808000 0x900000 .. 0x908000 32k DCCM
+ * 0x840000 .. 0x860000 0x908000 .. 0x928000 128k PERIPH
*/
-const struct fw_map fw_mapping[] = {
+const struct fw_map sparrow_fw_mapping[] = {
/* FW code RAM 256k */
{0x000000, 0x040000, 0x8c0000, "fw_code", true},
/* FW data RAM 32k */
@@ -112,6 +113,51 @@
{0x800000, 0x804000, 0x940000, "uc_data", false},
};
+/**
+ * @talyn_fw_mapping provides memory remapping table for Talyn
+ *
+ * array size should be in sync with the declaration in the wil6210.h
+ *
+ * Talyn memory mapping:
+ * Linker address PCI/Host address
+ * 0x880000 .. 0xc80000 4Mb BAR0
+ * 0x800000 .. 0x820000 0xa00000 .. 0xa20000 128k DCCM
+ * 0x840000 .. 0x858000 0xa20000 .. 0xa38000 96k PERIPH
+ */
+const struct fw_map talyn_fw_mapping[] = {
+ /* FW code RAM 1M */
+ {0x000000, 0x100000, 0x900000, "fw_code", true},
+ /* FW data RAM 128k */
+ {0x800000, 0x820000, 0xa00000, "fw_data", true},
+ /* periph. data RAM 96k */
+ {0x840000, 0x858000, 0xa20000, "fw_peri", true},
+ /* various RGF 40k */
+ {0x880000, 0x88a000, 0x880000, "rgf", true},
+ /* AGC table 4k */
+ {0x88a000, 0x88b000, 0x88a000, "AGC_tbl", true},
+ /* Pcie_ext_rgf 4k */
+ {0x88b000, 0x88c000, 0x88b000, "rgf_ext", true},
+ /* mac_ext_rgf 1344b */
+ {0x88c000, 0x88c540, 0x88c000, "mac_rgf_ext", true},
+ /* ext USER RGF 4k */
+ {0x88d000, 0x88e000, 0x88d000, "ext_user_rgf", true},
+ /* OTP 4k */
+ {0x8a0000, 0x8a1000, 0x8a0000, "otp", true},
+ /* DMA EXT RGF 64k */
+ {0x8b0000, 0x8c0000, 0x8b0000, "dma_ext_rgf", true},
+ /* upper area 1536k */
+ {0x900000, 0xa80000, 0x900000, "upper", true},
+ /* UCODE areas - accessible by debugfs blobs but not by
+ * wmi_addr_remap. UCODE areas MUST be added AFTER FW areas!
+ */
+ /* ucode code RAM 256k */
+ {0x000000, 0x040000, 0xa38000, "uc_code", false},
+ /* ucode data RAM 32k */
+ {0x800000, 0x808000, 0xa78000, "uc_data", false},
+};
+
+struct fw_map fw_mapping[MAX_FW_MAPPING_TABLE_SIZE];
+
struct blink_on_off_time led_blink_time[] = {
{WIL_LED_BLINK_ON_SLOW_MS, WIL_LED_BLINK_OFF_SLOW_MS},
{WIL_LED_BLINK_ON_MED_MS, WIL_LED_BLINK_OFF_MED_MS},
--
1.9.1
^ permalink raw reply related [flat|nested] 9+ messages in thread* [PATCH 4/8] wil6210: support flashless device
2018-01-19 15:36 [PATCH 0/8] wil6210 patches Maya Erez
` (2 preceding siblings ...)
2018-01-19 15:36 ` [PATCH 3/8] wil6210: add support for Talyn AHB address map Maya Erez
@ 2018-01-19 15:37 ` Maya Erez
2018-01-19 15:37 ` [PATCH 5/8] wil6210: configure OTP HW vectors in SW reset flow Maya Erez
` (3 subsequent siblings)
7 siblings, 0 replies; 9+ messages in thread
From: Maya Erez @ 2018-01-19 15:37 UTC (permalink / raw)
To: Kalle Valo; +Cc: Dedy Lansky, linux-wireless, wil6210, Maya Erez, Maya Erez
From: Dedy Lansky <dlansky@codeaurora.org>
Talyn device supports boot without flash.
Driver detects flashless device and in this case waits for ready indication
from HW machine (instead of bootloader ready indication). Also in this
case, MAC address is retrieved from OTP.
Signed-off-by: Dedy Lansky <dlansky@codeaurora.org>
Signed-off-by: Maya Erez <merez@codeaurora.org>
---
drivers/net/wireless/ath/wil6210/main.c | 95 +++++++++++++++++++++--------
drivers/net/wireless/ath/wil6210/pcie_bus.c | 8 ++-
drivers/net/wireless/ath/wil6210/wil6210.h | 13 +++-
3 files changed, 87 insertions(+), 29 deletions(-)
diff --git a/drivers/net/wireless/ath/wil6210/main.c b/drivers/net/wireless/ath/wil6210/main.c
index aa6f9c4..f6cca0f 100644
--- a/drivers/net/wireless/ath/wil6210/main.c
+++ b/drivers/net/wireless/ath/wil6210/main.c
@@ -1,5 +1,6 @@
/*
* Copyright (c) 2012-2017 Qualcomm Atheros, Inc.
+ * Copyright (c) 2018, The Linux Foundation. All rights reserved.
*
* Permission to use, copy, modify, and/or distribute this software for any
* purpose with or without fee is hereby granted, provided that the above
@@ -670,7 +671,7 @@ static void wil_set_oob_mode(struct wil6210_priv *wil, u8 mode)
}
}
-static int wil_target_reset(struct wil6210_priv *wil)
+static int wil_target_reset(struct wil6210_priv *wil, int no_flash)
{
int delay = 0;
u32 x, x1 = 0;
@@ -684,9 +685,11 @@ static int wil_target_reset(struct wil6210_priv *wil)
wil_halt_cpu(wil);
- /* clear all boot loader "ready" bits */
- wil_w(wil, RGF_USER_BL +
- offsetof(struct bl_dedicated_registers_v0, boot_loader_ready), 0);
+ if (!no_flash)
+ /* clear all boot loader "ready" bits */
+ wil_w(wil, RGF_USER_BL +
+ offsetof(struct bl_dedicated_registers_v0,
+ boot_loader_ready), 0);
/* Clear Fw Download notification */
wil_c(wil, RGF_USER_USAGE_6, BIT(0));
@@ -727,21 +730,33 @@ static int wil_target_reset(struct wil6210_priv *wil)
wil_w(wil, RGF_USER_CLKS_CTL_SW_RST_VEC_0, 0);
/* wait until device ready. typical time is 20..80 msec */
- do {
- msleep(RST_DELAY);
- x = wil_r(wil, RGF_USER_BL +
- offsetof(struct bl_dedicated_registers_v0,
- boot_loader_ready));
- if (x1 != x) {
- wil_dbg_misc(wil, "BL.ready 0x%08x => 0x%08x\n", x1, x);
- x1 = x;
- }
- if (delay++ > RST_COUNT) {
- wil_err(wil, "Reset not completed, bl.ready 0x%08x\n",
- x);
- return -ETIME;
- }
- } while (x != BL_READY);
+ if (no_flash)
+ do {
+ msleep(RST_DELAY);
+ x = wil_r(wil, USER_EXT_USER_PMU_3);
+ if (delay++ > RST_COUNT) {
+ wil_err(wil, "Reset not completed, PMU_3 0x%08x\n",
+ x);
+ return -ETIME;
+ }
+ } while ((x & BIT_PMU_DEVICE_RDY) == 0);
+ else
+ do {
+ msleep(RST_DELAY);
+ x = wil_r(wil, RGF_USER_BL +
+ offsetof(struct bl_dedicated_registers_v0,
+ boot_loader_ready));
+ if (x1 != x) {
+ wil_dbg_misc(wil, "BL.ready 0x%08x => 0x%08x\n",
+ x1, x);
+ x1 = x;
+ }
+ if (delay++ > RST_COUNT) {
+ wil_err(wil, "Reset not completed, bl.ready 0x%08x\n",
+ x);
+ return -ETIME;
+ }
+ } while (x != BL_READY);
wil_c(wil, RGF_USER_CLKS_CTL_0, BIT_USER_CLKS_RST_PWGD);
@@ -906,6 +921,27 @@ static void wil_bl_crash_info(struct wil6210_priv *wil, bool is_err)
}
}
+static int wil_get_otp_info(struct wil6210_priv *wil)
+{
+ struct net_device *ndev = wil_to_ndev(wil);
+ struct wiphy *wiphy = wil_to_wiphy(wil);
+ u8 mac[8];
+
+ wil_memcpy_fromio_32(mac, wil->csr + HOSTADDR(RGF_OTP_MAC),
+ sizeof(mac));
+ if (!is_valid_ether_addr(mac)) {
+ wil_err(wil, "Invalid MAC %pM\n", mac);
+ return -EINVAL;
+ }
+
+ ether_addr_copy(ndev->perm_addr, mac);
+ ether_addr_copy(wiphy->perm_addr, mac);
+ if (!is_valid_ether_addr(ndev->dev_addr))
+ ether_addr_copy(ndev->dev_addr, mac);
+
+ return 0;
+}
+
static int wil_wait_for_fw_ready(struct wil6210_priv *wil)
{
ulong to = msecs_to_jiffies(1000);
@@ -999,6 +1035,7 @@ int wil_reset(struct wil6210_priv *wil, bool load_fw)
{
int rc;
unsigned long status_flags = BIT(wil_status_resetting);
+ int no_flash;
wil_dbg_misc(wil, "reset\n");
@@ -1074,20 +1111,28 @@ int wil_reset(struct wil6210_priv *wil, bool load_fw)
flush_workqueue(wil->wq_service);
flush_workqueue(wil->wmi_wq);
- wil_bl_crash_info(wil, false);
+ no_flash = test_bit(hw_capa_no_flash, wil->hw_capa);
+ if (!no_flash)
+ wil_bl_crash_info(wil, false);
wil_disable_irq(wil);
- rc = wil_target_reset(wil);
+ rc = wil_target_reset(wil, no_flash);
wil6210_clear_irq(wil);
wil_enable_irq(wil);
wil_rx_fini(wil);
if (rc) {
- wil_bl_crash_info(wil, true);
+ if (!no_flash)
+ wil_bl_crash_info(wil, true);
goto out;
}
- rc = wil_get_bl_info(wil);
- if (rc == -EAGAIN && !load_fw) /* ignore RF error if not going up */
- rc = 0;
+ if (no_flash) {
+ rc = wil_get_otp_info(wil);
+ } else {
+ rc = wil_get_bl_info(wil);
+ if (rc == -EAGAIN && !load_fw)
+ /* ignore RF error if not going up */
+ rc = 0;
+ }
if (rc)
goto out;
diff --git a/drivers/net/wireless/ath/wil6210/pcie_bus.c b/drivers/net/wireless/ath/wil6210/pcie_bus.c
index 6b153fe..ab8cb91 100644
--- a/drivers/net/wireless/ath/wil6210/pcie_bus.c
+++ b/drivers/net/wireless/ath/wil6210/pcie_bus.c
@@ -44,7 +44,7 @@ int wil_set_capabilities(struct wil6210_priv *wil)
RGF_USER_REVISION_ID_MASK);
int platform_capa;
- bitmap_zero(wil->hw_capabilities, hw_capability_last);
+ bitmap_zero(wil->hw_capa, hw_capa_last);
bitmap_zero(wil->fw_capabilities, WMI_FW_CAPABILITY_MAX);
bitmap_zero(wil->platform_capa, WIL_PLATFORM_CAPA_MAX);
wil->wil_fw_name = ftm_mode ? WIL_FW_NAME_FTM_DEFAULT :
@@ -83,6 +83,9 @@ int wil_set_capabilities(struct wil6210_priv *wil)
memcpy(fw_mapping, talyn_fw_mapping, sizeof(talyn_fw_mapping));
wil->rgf_fw_assert_code_addr = TALYN_RGF_FW_ASSERT_CODE;
wil->rgf_ucode_assert_code_addr = TALYN_RGF_UCODE_ASSERT_CODE;
+ if (wil_r(wil, RGF_USER_OTP_HW_RD_MACHINE_1) &
+ BIT_NO_FLASH_INDICATION)
+ set_bit(hw_capa_no_flash, wil->hw_capa);
break;
default:
wil_err(wil, "Unknown board hardware, chip_id 0x%08x, chip_revision 0x%08x\n",
@@ -92,7 +95,8 @@ int wil_set_capabilities(struct wil6210_priv *wil)
return -EINVAL;
}
- wil_info(wil, "Board hardware is %s\n", wil->hw_name);
+ wil_info(wil, "Board hardware is %s, flash %sexist\n", wil->hw_name,
+ test_bit(hw_capa_no_flash, wil->hw_capa) ? "doesn't " : "");
/* Get platform capabilities */
if (wil->platform_ops.get_capa) {
diff --git a/drivers/net/wireless/ath/wil6210/wil6210.h b/drivers/net/wireless/ath/wil6210/wil6210.h
index 79356bb..2273a05 100644
--- a/drivers/net/wireless/ath/wil6210/wil6210.h
+++ b/drivers/net/wireless/ath/wil6210/wil6210.h
@@ -195,6 +195,8 @@ struct RGF_ICR {
#define RGF_USER_CLKS_CTL_EXT_SW_RST_VEC_1 (0x880c2c)
#define RGF_USER_SPARROW_M_4 (0x880c50) /* Sparrow */
#define BIT_SPARROW_M_4_SEL_SLEEP_OR_REF BIT(2)
+#define RGF_USER_OTP_HW_RD_MACHINE_1 (0x880ce0)
+ #define BIT_NO_FLASH_INDICATION BIT(8)
#define RGF_DMA_EP_TX_ICR (0x881bb4) /* struct RGF_ICR */
#define BIT_DMA_EP_TX_ICR_TX_DONE BIT(0)
@@ -285,6 +287,9 @@ struct RGF_ICR {
#define RGF_CAF_PLL_LOCK_STATUS (0x88afec)
#define BIT_CAF_OSC_DIG_XTAL_STABLE BIT(0)
+#define USER_EXT_USER_PMU_3 (0x88d00c)
+ #define BIT_PMU_DEVICE_RDY BIT(0)
+
#define RGF_USER_JTAG_DEV_ID (0x880b34) /* device ID */
#define JTAG_DEV_ID_SPARROW (0x2632072f)
#define JTAG_DEV_ID_TALYN (0x7e0e1)
@@ -294,6 +299,8 @@ struct RGF_ICR {
#define REVISION_ID_SPARROW_B0 (0x0)
#define REVISION_ID_SPARROW_D0 (0x3)
+#define RGF_OTP_MAC (0x8a0620)
+
/* crash codes for FW/Ucode stored here */
/* ASSERT RGFs */
@@ -583,7 +590,8 @@ enum {
};
enum {
- hw_capability_last
+ hw_capa_no_flash,
+ hw_capa_last
};
struct wil_probe_client_req {
@@ -659,7 +667,8 @@ struct wil6210_priv {
u8 chip_revision;
const char *hw_name;
const char *wil_fw_name;
- DECLARE_BITMAP(hw_capabilities, hw_capability_last);
+ char *board_file;
+ DECLARE_BITMAP(hw_capa, hw_capa_last);
DECLARE_BITMAP(fw_capabilities, WMI_FW_CAPABILITY_MAX);
DECLARE_BITMAP(platform_capa, WIL_PLATFORM_CAPA_MAX);
u8 n_mids; /* number of additional MIDs as reported by FW */
--
1.9.1
^ permalink raw reply related [flat|nested] 9+ messages in thread* [PATCH 5/8] wil6210: configure OTP HW vectors in SW reset flow
2018-01-19 15:36 [PATCH 0/8] wil6210 patches Maya Erez
` (3 preceding siblings ...)
2018-01-19 15:37 ` [PATCH 4/8] wil6210: support flashless device Maya Erez
@ 2018-01-19 15:37 ` Maya Erez
2018-01-19 15:37 ` [PATCH 6/8] wil6210: fix random failure to bring network interface up Maya Erez
` (2 subsequent siblings)
7 siblings, 0 replies; 9+ messages in thread
From: Maya Erez @ 2018-01-19 15:37 UTC (permalink / raw)
To: Kalle Valo; +Cc: Maya Erez, linux-wireless, wil6210, Maya Erez
OTP HW vectors values are different for 40MHz and 330MHz AHB
clocks.
In SW reset flow, the host driver sets the clock frequency
to 40MHz. In order to allow reading from the OTP, the host
driver should configure the OTP HW vectors with the values
that fits this clock frequency.
Signed-off-by: Maya Erez <merez@codeaurora.org>
---
drivers/net/wireless/ath/wil6210/main.c | 15 +++++++++++++++
drivers/net/wireless/ath/wil6210/wil6210.h | 11 +++++++++++
2 files changed, 26 insertions(+)
diff --git a/drivers/net/wireless/ath/wil6210/main.c b/drivers/net/wireless/ath/wil6210/main.c
index f6cca0f..d95ff74 100644
--- a/drivers/net/wireless/ath/wil6210/main.c
+++ b/drivers/net/wireless/ath/wil6210/main.c
@@ -764,6 +764,21 @@ static int wil_target_reset(struct wil6210_priv *wil, int no_flash)
wil_s(wil, RGF_DMA_OFUL_NID_0, BIT_DMA_OFUL_NID_0_RX_EXT_TR_EN |
BIT_DMA_OFUL_NID_0_RX_EXT_A3_SRC);
+ if (no_flash) {
+ /* Reset OTP HW vectors to fit 40MHz */
+ wil_w(wil, RGF_USER_XPM_IFC_RD_TIME1, 0x60001);
+ wil_w(wil, RGF_USER_XPM_IFC_RD_TIME2, 0x20027);
+ wil_w(wil, RGF_USER_XPM_IFC_RD_TIME3, 0x1);
+ wil_w(wil, RGF_USER_XPM_IFC_RD_TIME4, 0x20027);
+ wil_w(wil, RGF_USER_XPM_IFC_RD_TIME5, 0x30003);
+ wil_w(wil, RGF_USER_XPM_IFC_RD_TIME6, 0x20002);
+ wil_w(wil, RGF_USER_XPM_IFC_RD_TIME7, 0x60001);
+ wil_w(wil, RGF_USER_XPM_IFC_RD_TIME8, 0x60001);
+ wil_w(wil, RGF_USER_XPM_IFC_RD_TIME9, 0x60001);
+ wil_w(wil, RGF_USER_XPM_IFC_RD_TIME10, 0x60001);
+ wil_w(wil, RGF_USER_XPM_RD_DOUT_SAMPLE_TIME, 0x57);
+ }
+
wil_dbg_misc(wil, "Reset completed in %d ms\n", delay * RST_DELAY);
return 0;
}
diff --git a/drivers/net/wireless/ath/wil6210/wil6210.h b/drivers/net/wireless/ath/wil6210/wil6210.h
index 2273a05..d243df3 100644
--- a/drivers/net/wireless/ath/wil6210/wil6210.h
+++ b/drivers/net/wireless/ath/wil6210/wil6210.h
@@ -197,6 +197,17 @@ struct RGF_ICR {
#define BIT_SPARROW_M_4_SEL_SLEEP_OR_REF BIT(2)
#define RGF_USER_OTP_HW_RD_MACHINE_1 (0x880ce0)
#define BIT_NO_FLASH_INDICATION BIT(8)
+#define RGF_USER_XPM_IFC_RD_TIME1 (0x880cec)
+#define RGF_USER_XPM_IFC_RD_TIME2 (0x880cf0)
+#define RGF_USER_XPM_IFC_RD_TIME3 (0x880cf4)
+#define RGF_USER_XPM_IFC_RD_TIME4 (0x880cf8)
+#define RGF_USER_XPM_IFC_RD_TIME5 (0x880cfc)
+#define RGF_USER_XPM_IFC_RD_TIME6 (0x880d00)
+#define RGF_USER_XPM_IFC_RD_TIME7 (0x880d04)
+#define RGF_USER_XPM_IFC_RD_TIME8 (0x880d08)
+#define RGF_USER_XPM_IFC_RD_TIME9 (0x880d0c)
+#define RGF_USER_XPM_IFC_RD_TIME10 (0x880d10)
+#define RGF_USER_XPM_RD_DOUT_SAMPLE_TIME (0x880d64)
#define RGF_DMA_EP_TX_ICR (0x881bb4) /* struct RGF_ICR */
#define BIT_DMA_EP_TX_ICR_TX_DONE BIT(0)
--
1.9.1
^ permalink raw reply related [flat|nested] 9+ messages in thread* [PATCH 6/8] wil6210: fix random failure to bring network interface up
2018-01-19 15:36 [PATCH 0/8] wil6210 patches Maya Erez
` (4 preceding siblings ...)
2018-01-19 15:37 ` [PATCH 5/8] wil6210: configure OTP HW vectors in SW reset flow Maya Erez
@ 2018-01-19 15:37 ` Maya Erez
2018-01-19 15:37 ` [PATCH 7/8] wil6210: enlarge FW mac_rgf_ext section for Sparrow D0 Maya Erez
2018-01-19 15:37 ` [PATCH 8/8] wil6210: support parsing brd file address from fw file Maya Erez
7 siblings, 0 replies; 9+ messages in thread
From: Maya Erez @ 2018-01-19 15:37 UTC (permalink / raw)
To: Kalle Valo; +Cc: Lior David, linux-wireless, wil6210, Maya Erez, Maya Erez
From: Lior David <liord@codeaurora.org>
Currently when we want to bring the interface up, we first
reset the device which causes the boot loader to run. Then
we halt the device CPU, load FW image and resume the device
CPU.
There are some boot loader versions which perform redundant
memory accesses even when idle. Halting the device CPU
while boot loader access memory can cause the device memory
controller to get stuck, the FW will fail to load and the
network interface will not come up.
For such boot loaders implement a workaround where we freeze
the boot loader before halting the device CPU, so it will not
perform any memory accesses.
Signed-off-by: Lior David <liord@codeaurora.org>
Signed-off-by: Maya Erez <merez@codeaurora.org>
---
drivers/net/wireless/ath/wil6210/boot_loader.h | 9 ++-
drivers/net/wireless/ath/wil6210/main.c | 101 ++++++++++++++++++++++++-
drivers/net/wireless/ath/wil6210/pcie_bus.c | 8 ++
drivers/net/wireless/ath/wil6210/wil6210.h | 3 +
drivers/net/wireless/ath/wil6210/wmi.c | 18 +++++
5 files changed, 137 insertions(+), 2 deletions(-)
diff --git a/drivers/net/wireless/ath/wil6210/boot_loader.h b/drivers/net/wireless/ath/wil6210/boot_loader.h
index c131b5e..d32c1f4 100644
--- a/drivers/net/wireless/ath/wil6210/boot_loader.h
+++ b/drivers/net/wireless/ath/wil6210/boot_loader.h
@@ -1,4 +1,5 @@
/* Copyright (c) 2015 Qualcomm Atheros, Inc.
+ * Copyright (c) 2018, The Linux Foundation. All rights reserved.
*
* Permission to use, copy, modify, and/or distribute this software for any
* purpose with or without fee is hereby granted, provided that the above
@@ -39,7 +40,8 @@ struct bl_dedicated_registers_v1 {
/* valid only for version 2 and above */
__le32 bl_assert_code; /* 0x880A58 BL Assert code */
__le32 bl_assert_blink; /* 0x880A5C BL Assert Branch */
- __le32 bl_reserved[22]; /* 0x880A60 - 0x880AB4 */
+ __le32 bl_shutdown_handshake; /* 0x880A60 BL cleaner shutdown */
+ __le32 bl_reserved[21]; /* 0x880A64 - 0x880AB4 */
__le32 bl_magic_number; /* 0x880AB8 BL Magic number */
} __packed;
@@ -58,4 +60,9 @@ struct bl_dedicated_registers_v0 {
u8 mac_address[6]; /* 0x880A4c BL mac address */
} __packed;
+/* bits for bl_shutdown_handshake */
+#define BL_SHUTDOWN_HS_GRTD BIT(0)
+#define BL_SHUTDOWN_HS_RTD BIT(1)
+#define BL_SHUTDOWN_HS_PROT_VER(x) WIL_GET_BITS(x, 28, 31)
+
#endif /* BOOT_LOADER_EXPORT_H_ */
diff --git a/drivers/net/wireless/ath/wil6210/main.c b/drivers/net/wireless/ath/wil6210/main.c
index d95ff74..a6af486 100644
--- a/drivers/net/wireless/ath/wil6210/main.c
+++ b/drivers/net/wireless/ath/wil6210/main.c
@@ -638,6 +638,97 @@ void wil_priv_deinit(struct wil6210_priv *wil)
destroy_workqueue(wil->wmi_wq);
}
+static void wil_shutdown_bl(struct wil6210_priv *wil)
+{
+ u32 val;
+
+ wil_s(wil, RGF_USER_BL +
+ offsetof(struct bl_dedicated_registers_v1,
+ bl_shutdown_handshake), BL_SHUTDOWN_HS_GRTD);
+
+ usleep_range(100, 150);
+
+ val = wil_r(wil, RGF_USER_BL +
+ offsetof(struct bl_dedicated_registers_v1,
+ bl_shutdown_handshake));
+ if (val & BL_SHUTDOWN_HS_RTD) {
+ wil_dbg_misc(wil, "BL is ready for halt\n");
+ return;
+ }
+
+ wil_err(wil, "BL did not report ready for halt\n");
+}
+
+/* this format is used by ARC embedded CPU for instruction memory */
+static inline u32 ARC_me_imm32(u32 d)
+{
+ return ((d & 0xffff0000) >> 16) | ((d & 0x0000ffff) << 16);
+}
+
+/* defines access to interrupt vectors for wil_freeze_bl */
+#define ARC_IRQ_VECTOR_OFFSET(N) ((N) * 8)
+/* ARC long jump instruction */
+#define ARC_JAL_INST (0x20200f80)
+
+static void wil_freeze_bl(struct wil6210_priv *wil)
+{
+ u32 jal, upc, saved;
+ u32 ivt3 = ARC_IRQ_VECTOR_OFFSET(3);
+
+ jal = wil_r(wil, wil->iccm_base + ivt3);
+ if (jal != ARC_me_imm32(ARC_JAL_INST)) {
+ wil_dbg_misc(wil, "invalid IVT entry found, skipping\n");
+ return;
+ }
+
+ /* prevent the target from entering deep sleep
+ * and disabling memory access
+ */
+ saved = wil_r(wil, RGF_USER_USAGE_8);
+ wil_w(wil, RGF_USER_USAGE_8, saved | BIT_USER_PREVENT_DEEP_SLEEP);
+ usleep_range(20, 25); /* let the BL process the bit */
+
+ /* redirect to endless loop in the INT_L1 context and let it trap */
+ wil_w(wil, wil->iccm_base + ivt3 + 4, ARC_me_imm32(ivt3));
+ usleep_range(20, 25); /* let the BL get into the trap */
+
+ /* verify the BL is frozen */
+ upc = wil_r(wil, RGF_USER_CPU_PC);
+ wil_dbg_misc(wil, "BL freeze failed, PC=0x%08X\n", upc);
+
+ wil_w(wil, RGF_USER_USAGE_8, saved);
+}
+
+static void wil_bl_prepare_halt(struct wil6210_priv *wil)
+{
+ u32 tmp, ver;
+
+ /* before halting device CPU driver must make sure BL is not accessing
+ * host memory. This is done differently depending on BL version:
+ * 1. For very old BL versions the procedure is skipped
+ * (not supported).
+ * 2. For old BL version we use a special trick to freeze the BL
+ * 3. For new BL versions we shutdown the BL using handshake procedure.
+ */
+ tmp = wil_r(wil, RGF_USER_BL +
+ offsetof(struct bl_dedicated_registers_v0,
+ boot_loader_struct_version));
+ if (!tmp) {
+ wil_dbg_misc(wil, "old BL, skipping halt preperation\n");
+ return;
+ }
+
+ tmp = wil_r(wil, RGF_USER_BL +
+ offsetof(struct bl_dedicated_registers_v1,
+ bl_shutdown_handshake));
+ ver = BL_SHUTDOWN_HS_PROT_VER(tmp);
+
+ if (ver > 0)
+ wil_shutdown_bl(wil);
+ else
+ wil_freeze_bl(wil);
+}
+
static inline void wil_halt_cpu(struct wil6210_priv *wil)
{
wil_w(wil, RGF_USER_USER_CPU_0, BIT_USER_USER_CPU_MAN_RST);
@@ -685,11 +776,16 @@ static int wil_target_reset(struct wil6210_priv *wil, int no_flash)
wil_halt_cpu(wil);
- if (!no_flash)
+ if (!no_flash) {
/* clear all boot loader "ready" bits */
wil_w(wil, RGF_USER_BL +
offsetof(struct bl_dedicated_registers_v0,
boot_loader_ready), 0);
+ /* this should be safe to write even with old BLs */
+ wil_w(wil, RGF_USER_BL +
+ offsetof(struct bl_dedicated_registers_v1,
+ bl_shutdown_handshake), 0);
+ }
/* Clear Fw Download notification */
wil_c(wil, RGF_USER_USAGE_6, BIT(0));
@@ -1156,6 +1252,9 @@ int wil_reset(struct wil6210_priv *wil, bool load_fw)
wil_info(wil, "Use firmware <%s> + board <%s>\n",
wil->wil_fw_name, WIL_BOARD_FILE_NAME);
+ if (!no_flash)
+ wil_bl_prepare_halt(wil);
+
wil_halt_cpu(wil);
memset(wil->fw_version, 0, sizeof(wil->fw_version));
/* Loading f/w from the file */
diff --git a/drivers/net/wireless/ath/wil6210/pcie_bus.c b/drivers/net/wireless/ath/wil6210/pcie_bus.c
index ab8cb91..750c34e 100644
--- a/drivers/net/wireless/ath/wil6210/pcie_bus.c
+++ b/drivers/net/wireless/ath/wil6210/pcie_bus.c
@@ -43,6 +43,7 @@ int wil_set_capabilities(struct wil6210_priv *wil)
u8 chip_revision = (wil_r(wil, RGF_USER_REVISION_ID) &
RGF_USER_REVISION_ID_MASK);
int platform_capa;
+ struct fw_map *iccm_section;
bitmap_zero(wil->hw_capa, hw_capa_last);
bitmap_zero(wil->fw_capabilities, WMI_FW_CAPABILITY_MAX);
@@ -95,6 +96,13 @@ int wil_set_capabilities(struct wil6210_priv *wil)
return -EINVAL;
}
+ iccm_section = wil_find_fw_mapping("fw_code");
+ if (!iccm_section) {
+ wil_err(wil, "fw_code section not found in fw_mapping\n");
+ return -EINVAL;
+ }
+ wil->iccm_base = iccm_section->host;
+
wil_info(wil, "Board hardware is %s, flash %sexist\n", wil->hw_name,
test_bit(hw_capa_no_flash, wil->hw_capa) ? "doesn't " : "");
diff --git a/drivers/net/wireless/ath/wil6210/wil6210.h b/drivers/net/wireless/ath/wil6210/wil6210.h
index d243df3..5f9bcfb 100644
--- a/drivers/net/wireless/ath/wil6210/wil6210.h
+++ b/drivers/net/wireless/ath/wil6210/wil6210.h
@@ -170,6 +170,7 @@ struct RGF_ICR {
#define HW_MACHINE_BOOT_DONE (0x3fffffd)
#define RGF_USER_USER_CPU_0 (0x8801e0)
#define BIT_USER_USER_CPU_MAN_RST BIT(1) /* user_cpu_man_rst */
+#define RGF_USER_CPU_PC (0x8801e8)
#define RGF_USER_MAC_CPU_0 (0x8801fc)
#define BIT_USER_MAC_CPU_MAN_RST BIT(1) /* mac_cpu_man_rst */
#define RGF_USER_USER_SCRATCH_PAD (0x8802bc)
@@ -791,6 +792,7 @@ struct wil6210_priv {
u32 rgf_fw_assert_code_addr;
u32 rgf_ucode_assert_code_addr;
+ u32 iccm_base;
};
#define wil_to_wiphy(i) (i->wdev->wiphy)
@@ -916,6 +918,7 @@ int wil_ps_update(struct wil6210_priv *wil,
int wil_find_cid(struct wil6210_priv *wil, const u8 *mac);
void wil_set_ethtoolops(struct net_device *ndev);
+struct fw_map *wil_find_fw_mapping(const char *section);
void __iomem *wmi_buffer_block(struct wil6210_priv *wil, __le32 ptr, u32 size);
void __iomem *wmi_buffer(struct wil6210_priv *wil, __le32 ptr);
void __iomem *wmi_addr(struct wil6210_priv *wil, u32 ptr);
diff --git a/drivers/net/wireless/ath/wil6210/wmi.c b/drivers/net/wireless/ath/wil6210/wmi.c
index 69da3c2..43c5803 100644
--- a/drivers/net/wireless/ath/wil6210/wmi.c
+++ b/drivers/net/wireless/ath/wil6210/wmi.c
@@ -185,6 +185,24 @@ static u32 wmi_addr_remap(u32 x)
}
/**
+ * find fw_mapping entry by section name
+ * @section - section name
+ *
+ * Return pointer to section or NULL if not found
+ */
+struct fw_map *wil_find_fw_mapping(const char *section)
+{
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(fw_mapping); i++)
+ if (fw_mapping[i].name &&
+ !strcmp(section, fw_mapping[i].name))
+ return &fw_mapping[i];
+
+ return NULL;
+}
+
+/**
* Check address validity for WMI buffer; remap if needed
* @ptr - internal (linker) fw/ucode address
* @size - if non zero, validate the block does not
--
1.9.1
^ permalink raw reply related [flat|nested] 9+ messages in thread* [PATCH 7/8] wil6210: enlarge FW mac_rgf_ext section for Sparrow D0
2018-01-19 15:36 [PATCH 0/8] wil6210 patches Maya Erez
` (5 preceding siblings ...)
2018-01-19 15:37 ` [PATCH 6/8] wil6210: fix random failure to bring network interface up Maya Erez
@ 2018-01-19 15:37 ` Maya Erez
2018-01-19 15:37 ` [PATCH 8/8] wil6210: support parsing brd file address from fw file Maya Erez
7 siblings, 0 replies; 9+ messages in thread
From: Maya Erez @ 2018-01-19 15:37 UTC (permalink / raw)
To: Kalle Valo; +Cc: Lior David, linux-wireless, wil6210, Maya Erez, Maya Erez
From: Lior David <liord@codeaurora.org>
Sparrow D0 chips have slightly larger mac_rgf_ext section
in order to support extra features such as multiple virtual
interfaces.
Signed-off-by: Lior David <liord@codeaurora.org>
Signed-off-by: Maya Erez <merez@codeaurora.org>
---
drivers/net/wireless/ath/wil6210/pcie_bus.c | 12 +++++++++---
drivers/net/wireless/ath/wil6210/wil6210.h | 1 +
drivers/net/wireless/ath/wil6210/wmi.c | 8 ++++++++
3 files changed, 18 insertions(+), 3 deletions(-)
diff --git a/drivers/net/wireless/ath/wil6210/pcie_bus.c b/drivers/net/wireless/ath/wil6210/pcie_bus.c
index 750c34e..809092a 100644
--- a/drivers/net/wireless/ath/wil6210/pcie_bus.c
+++ b/drivers/net/wireless/ath/wil6210/pcie_bus.c
@@ -43,7 +43,7 @@ int wil_set_capabilities(struct wil6210_priv *wil)
u8 chip_revision = (wil_r(wil, RGF_USER_REVISION_ID) &
RGF_USER_REVISION_ID_MASK);
int platform_capa;
- struct fw_map *iccm_section;
+ struct fw_map *iccm_section, *sct;
bitmap_zero(wil->hw_capa, hw_capa_last);
bitmap_zero(wil->fw_capabilities, WMI_FW_CAPABILITY_MAX);
@@ -54,6 +54,8 @@ int wil_set_capabilities(struct wil6210_priv *wil)
switch (jtag_id) {
case JTAG_DEV_ID_SPARROW:
+ memcpy(fw_mapping, sparrow_fw_mapping,
+ sizeof(sparrow_fw_mapping));
switch (chip_revision) {
case REVISION_ID_SPARROW_D0:
wil->hw_name = "Sparrow D0";
@@ -63,6 +65,12 @@ int wil_set_capabilities(struct wil6210_priv *wil)
if (wil_fw_verify_file_exists(wil, wil_fw_name))
wil->wil_fw_name = wil_fw_name;
+ sct = wil_find_fw_mapping("mac_rgf_ext");
+ if (!sct) {
+ wil_err(wil, "mac_rgf_ext section not found in fw_mapping\n");
+ return -EINVAL;
+ }
+ memcpy(sct, &sparrow_d0_mac_rgf_ext, sizeof(*sct));
break;
case REVISION_ID_SPARROW_B0:
wil->hw_name = "Sparrow B0";
@@ -73,8 +81,6 @@ int wil_set_capabilities(struct wil6210_priv *wil)
wil->hw_version = HW_VER_UNKNOWN;
break;
}
- memcpy(fw_mapping, sparrow_fw_mapping,
- sizeof(sparrow_fw_mapping));
wil->rgf_fw_assert_code_addr = SPARROW_RGF_FW_ASSERT_CODE;
wil->rgf_ucode_assert_code_addr = SPARROW_RGF_UCODE_ASSERT_CODE;
break;
diff --git a/drivers/net/wireless/ath/wil6210/wil6210.h b/drivers/net/wireless/ath/wil6210/wil6210.h
index 5f9bcfb..836122a 100644
--- a/drivers/net/wireless/ath/wil6210/wil6210.h
+++ b/drivers/net/wireless/ath/wil6210/wil6210.h
@@ -355,6 +355,7 @@ struct fw_map {
/* array size should be in sync with actual definition in the wmi.c */
extern const struct fw_map sparrow_fw_mapping[SPARROW_FW_MAPPING_TABLE_SIZE];
+extern const struct fw_map sparrow_d0_mac_rgf_ext;
extern const struct fw_map talyn_fw_mapping[TALYN_FW_MAPPING_TABLE_SIZE];
extern struct fw_map fw_mapping[MAX_FW_MAPPING_TABLE_SIZE];
diff --git a/drivers/net/wireless/ath/wil6210/wmi.c b/drivers/net/wireless/ath/wil6210/wmi.c
index 43c5803..b31e251 100644
--- a/drivers/net/wireless/ath/wil6210/wmi.c
+++ b/drivers/net/wireless/ath/wil6210/wmi.c
@@ -114,6 +114,14 @@
};
/**
+ * @sparrow_d0_mac_rgf_ext - mac_rgf_ext section for Sparrow D0
+ * it is a bit larger to support extra features
+ */
+const struct fw_map sparrow_d0_mac_rgf_ext = {
+ 0x88c000, 0x88c500, 0x88c000, "mac_rgf_ext", true
+};
+
+/**
* @talyn_fw_mapping provides memory remapping table for Talyn
*
* array size should be in sync with the declaration in the wil6210.h
--
1.9.1
^ permalink raw reply related [flat|nested] 9+ messages in thread* [PATCH 8/8] wil6210: support parsing brd file address from fw file
2018-01-19 15:36 [PATCH 0/8] wil6210 patches Maya Erez
` (6 preceding siblings ...)
2018-01-19 15:37 ` [PATCH 7/8] wil6210: enlarge FW mac_rgf_ext section for Sparrow D0 Maya Erez
@ 2018-01-19 15:37 ` Maya Erez
7 siblings, 0 replies; 9+ messages in thread
From: Maya Erez @ 2018-01-19 15:37 UTC (permalink / raw)
To: Kalle Valo; +Cc: Maya Erez, linux-wireless, wil6210, Maya Erez
In order to allow using the same brd file across different
11ad chips, the address for loading the brd file should be
part of the FW file, instead of the brd file. The brd file is
expected to include only one section.
To allow backward compatibility the driver reads the
address from the brd file in case it is not included in the
FW file.
Signed-off-by: Maya Erez <merez@codeaurora.org>
---
drivers/net/wireless/ath/wil6210/fw.h | 18 +++-
drivers/net/wireless/ath/wil6210/fw_inc.c | 167 +++++++++++++++++++++++++++--
drivers/net/wireless/ath/wil6210/main.c | 7 +-
drivers/net/wireless/ath/wil6210/wil6210.h | 3 +
4 files changed, 184 insertions(+), 11 deletions(-)
diff --git a/drivers/net/wireless/ath/wil6210/fw.h b/drivers/net/wireless/ath/wil6210/fw.h
index 2f2b910..2c7b24f 100644
--- a/drivers/net/wireless/ath/wil6210/fw.h
+++ b/drivers/net/wireless/ath/wil6210/fw.h
@@ -1,5 +1,6 @@
/*
* Copyright (c) 2014,2016 Qualcomm Atheros, Inc.
+ * Copyright (c) 2018, The Linux Foundation. All rights reserved.
*
* Permission to use, copy, modify, and/or distribute this software for any
* purpose with or without fee is hereby granted, provided that the above
@@ -58,15 +59,30 @@ struct wil_fw_record_comment { /* type == wil_fw_type_comment */
u8 data[0]; /* free-form data [data_size], see above */
} __packed;
+/* Comment header - common for all comment record types */
+struct wil_fw_record_comment_hdr {
+ __le32 magic;
+};
+
/* FW capabilities encoded inside a comment record */
#define WIL_FW_CAPABILITIES_MAGIC (0xabcddcba)
struct wil_fw_record_capabilities { /* type == wil_fw_type_comment */
/* identifies capabilities record */
- __le32 magic;
+ struct wil_fw_record_comment_hdr hdr;
/* capabilities (variable size), see enum wmi_fw_capability */
u8 capabilities[0];
};
+/* brd file info encoded inside a comment record */
+#define WIL_BRD_FILE_MAGIC (0xabcddcbb)
+struct wil_fw_record_brd_file { /* type == wil_fw_type_comment */
+ /* identifies brd file record */
+ struct wil_fw_record_comment_hdr hdr;
+ __le32 version;
+ __le32 base_addr;
+ __le32 max_size_bytes;
+} __packed;
+
/* perform action
* data_size = @head.size - offsetof(struct wil_fw_record_action, data)
*/
diff --git a/drivers/net/wireless/ath/wil6210/fw_inc.c b/drivers/net/wireless/ath/wil6210/fw_inc.c
index 77d1902..914c010 100644
--- a/drivers/net/wireless/ath/wil6210/fw_inc.c
+++ b/drivers/net/wireless/ath/wil6210/fw_inc.c
@@ -1,5 +1,6 @@
/*
* Copyright (c) 2014-2017 Qualcomm Atheros, Inc.
+ * Copyright (c) 2018, The Linux Foundation. All rights reserved.
*
* Permission to use, copy, modify, and/or distribute this software for any
* purpose with or without fee is hereby granted, provided that the above
@@ -128,14 +129,13 @@ static int fw_ignore_section(struct wil6210_priv *wil, const void *data,
}
static int
-fw_handle_comment(struct wil6210_priv *wil, const void *data,
- size_t size)
+fw_handle_capabilities(struct wil6210_priv *wil, const void *data,
+ size_t size)
{
const struct wil_fw_record_capabilities *rec = data;
size_t capa_size;
- if (size < sizeof(*rec) ||
- le32_to_cpu(rec->magic) != WIL_FW_CAPABILITIES_MAGIC) {
+ if (size < sizeof(*rec)) {
wil_hex_dump_fw("", DUMP_PREFIX_OFFSET, 16, 1,
data, size, true);
return 0;
@@ -151,8 +151,56 @@ static int fw_ignore_section(struct wil6210_priv *wil, const void *data,
return 0;
}
-static int fw_handle_data(struct wil6210_priv *wil, const void *data,
- size_t size)
+static int
+fw_handle_brd_file(struct wil6210_priv *wil, const void *data,
+ size_t size)
+{
+ const struct wil_fw_record_brd_file *rec = data;
+
+ if (size < sizeof(*rec)) {
+ wil_hex_dump_fw("", DUMP_PREFIX_OFFSET, 16, 1,
+ data, size, true);
+ return 0;
+ }
+
+ wil->brd_file_addr = le32_to_cpu(rec->base_addr);
+ wil->brd_file_max_size = le32_to_cpu(rec->max_size_bytes);
+
+ wil_dbg_fw(wil, "brd_file_addr 0x%x, brd_file_max_size %d\n",
+ wil->brd_file_addr, wil->brd_file_max_size);
+
+ return 0;
+}
+
+static int
+fw_handle_comment(struct wil6210_priv *wil, const void *data,
+ size_t size)
+{
+ const struct wil_fw_record_comment_hdr *hdr = data;
+ u32 magic;
+ int rc = 0;
+
+ if (size < sizeof(*hdr))
+ return 0;
+
+ magic = le32_to_cpu(hdr->magic);
+
+ switch (magic) {
+ case WIL_FW_CAPABILITIES_MAGIC:
+ wil_dbg_fw(wil, "magic is WIL_FW_CAPABILITIES_MAGIC\n");
+ rc = fw_handle_capabilities(wil, data, size);
+ break;
+ case WIL_BRD_FILE_MAGIC:
+ wil_dbg_fw(wil, "magic is WIL_BRD_FILE_MAGIC\n");
+ rc = fw_handle_brd_file(wil, data, size);
+ break;
+ }
+
+ return rc;
+}
+
+static int __fw_handle_data(struct wil6210_priv *wil, const void *data,
+ size_t size, __le32 addr)
{
const struct wil_fw_record_data *d = data;
void __iomem *dst;
@@ -163,16 +211,23 @@ static int fw_handle_data(struct wil6210_priv *wil, const void *data,
return -EINVAL;
}
- if (!wil_fw_addr_check(wil, &dst, d->addr, s, "address"))
+ if (!wil_fw_addr_check(wil, &dst, addr, s, "address"))
return -EINVAL;
- wil_dbg_fw(wil, "write [0x%08x] <== %zu bytes\n", le32_to_cpu(d->addr),
- s);
+ wil_dbg_fw(wil, "write [0x%08x] <== %zu bytes\n", le32_to_cpu(addr), s);
wil_memcpy_toio_32(dst, d->data, s);
wmb(); /* finish before processing next record */
return 0;
}
+static int fw_handle_data(struct wil6210_priv *wil, const void *data,
+ size_t size)
+{
+ const struct wil_fw_record_data *d = data;
+
+ return __fw_handle_data(wil, data, size, d->addr);
+}
+
static int fw_handle_fill(struct wil6210_priv *wil, const void *data,
size_t size)
{
@@ -552,6 +607,100 @@ int wil_request_firmware(struct wil6210_priv *wil, const char *name,
}
/**
+ * wil_brd_process - process section from BRD file
+ *
+ * Return error code
+ */
+static int wil_brd_process(struct wil6210_priv *wil, const void *data,
+ size_t size)
+{
+ int rc = 0;
+ const struct wil_fw_record_head *hdr = data;
+ size_t s, hdr_sz;
+ u16 type;
+
+ /* Assuming the board file includes only one header record and one data
+ * record. Each record starts with wil_fw_record_head.
+ */
+ if (size < sizeof(*hdr))
+ return -EINVAL;
+ s = sizeof(*hdr) + le32_to_cpu(hdr->size);
+ if (s > size)
+ return -EINVAL;
+
+ /* Skip the header record and handle the data record */
+ hdr = (const void *)hdr + s;
+ size -= s;
+ if (size < sizeof(*hdr))
+ return -EINVAL;
+ hdr_sz = le32_to_cpu(hdr->size);
+
+ if (wil->brd_file_max_size && hdr_sz > wil->brd_file_max_size)
+ return -EINVAL;
+ if (sizeof(*hdr) + hdr_sz > size)
+ return -EINVAL;
+ if (hdr_sz % 4) {
+ wil_err_fw(wil, "unaligned record size: %zu\n",
+ hdr_sz);
+ return -EINVAL;
+ }
+ type = le16_to_cpu(hdr->type);
+ if (type != wil_fw_type_data) {
+ wil_err_fw(wil, "invalid record type for board file: %d\n",
+ type);
+ return -EINVAL;
+ }
+ if (hdr_sz < sizeof(struct wil_fw_record_data)) {
+ wil_err_fw(wil, "data record too short: %zu\n", hdr_sz);
+ return -EINVAL;
+ }
+
+ wil_dbg_fw(wil, "using addr from fw file: [0x%08x]\n",
+ wil->brd_file_addr);
+
+ rc = __fw_handle_data(wil, &hdr[1], hdr_sz,
+ cpu_to_le32(wil->brd_file_addr));
+
+ return rc;
+}
+
+/**
+ * wil_request_board - Request board file
+ *
+ * Request board image from the file
+ * board file address and max size are read from FW file
+ * during initialization.
+ * brd file shall include one header and one data section.
+ *
+ * Return error code
+ */
+int wil_request_board(struct wil6210_priv *wil, const char *name)
+{
+ int rc, dlen;
+ const struct firmware *brd;
+
+ rc = request_firmware(&brd, name, wil_to_dev(wil));
+ if (rc) {
+ wil_err_fw(wil, "Failed to load brd %s\n", name);
+ return rc;
+ }
+ wil_dbg_fw(wil, "Loading <%s>, %zu bytes\n", name, brd->size);
+
+ /* Verify the header */
+ dlen = wil_fw_verify(wil, brd->data, brd->size);
+ if (dlen < 0) {
+ rc = dlen;
+ goto out;
+ }
+ /* Process the data record */
+ rc = wil_brd_process(wil, brd->data, dlen);
+
+out:
+ release_firmware(brd);
+ return rc;
+}
+
+/**
* wil_fw_verify_file_exists - checks if firmware file exist
*
* @wil: driver context
diff --git a/drivers/net/wireless/ath/wil6210/main.c b/drivers/net/wireless/ath/wil6210/main.c
index a6af486..d5c3ea3 100644
--- a/drivers/net/wireless/ath/wil6210/main.c
+++ b/drivers/net/wireless/ath/wil6210/main.c
@@ -1261,7 +1261,12 @@ int wil_reset(struct wil6210_priv *wil, bool load_fw)
rc = wil_request_firmware(wil, wil->wil_fw_name, true);
if (rc)
goto out;
- rc = wil_request_firmware(wil, WIL_BOARD_FILE_NAME, true);
+ if (wil->brd_file_addr)
+ rc = wil_request_board(wil, WIL_BOARD_FILE_NAME);
+ else
+ rc = wil_request_firmware(wil,
+ WIL_BOARD_FILE_NAME,
+ true);
if (rc)
goto out;
diff --git a/drivers/net/wireless/ath/wil6210/wil6210.h b/drivers/net/wireless/ath/wil6210/wil6210.h
index 836122a..0df2aad 100644
--- a/drivers/net/wireless/ath/wil6210/wil6210.h
+++ b/drivers/net/wireless/ath/wil6210/wil6210.h
@@ -681,6 +681,8 @@ struct wil6210_priv {
const char *hw_name;
const char *wil_fw_name;
char *board_file;
+ u32 brd_file_addr;
+ u32 brd_file_max_size;
DECLARE_BITMAP(hw_capa, hw_capa_last);
DECLARE_BITMAP(fw_capabilities, WMI_FW_CAPABILITY_MAX);
DECLARE_BITMAP(platform_capa, WIL_PLATFORM_CAPA_MAX);
@@ -1053,6 +1055,7 @@ void wil_update_net_queues_bh(struct wil6210_priv *wil, struct vring *vring,
int wil_request_firmware(struct wil6210_priv *wil, const char *name,
bool load);
+int wil_request_board(struct wil6210_priv *wil, const char *name);
bool wil_fw_verify_file_exists(struct wil6210_priv *wil, const char *name);
void wil_pm_runtime_allow(struct wil6210_priv *wil);
--
1.9.1
^ permalink raw reply related [flat|nested] 9+ messages in thread