[U-Boot] [PATCH v2 20/24] ARM: dts: dra7: Add supported MMC/SD modes in MMC dt nodes

[Jean-Jacques Hiblot <jjhiblot@ti.com>]

On DRA7 family SoCs, MMC1 controller supports SDR104,
SDR50, DDR50, SDR25 and SDR12 UHS modes.

MMC2 controller supports HS200 and DDR modes.

MMC3 controller supports SDR12, SDR25 and SDR50 modes.

MMC4 controller supports SDR12 and SDR25 modes.

Add these supported modes in device-tree file.

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
---

 arch/arm/dts/dra7.dtsi | 14 ++++++++++++++
 1 file changed, 14 insertions(+)

diff --git a/arch/arm/dts/dra7.dtsi b/arch/arm/dts/dra7.dtsi
index 9061843..0f982d8 100644
--- a/arch/arm/dts/dra7.dtsi
+++ b/arch/arm/dts/dra7.dtsi
@@ -1067,6 +1067,11 @@
 			status = "disabled";
 			pbias-supply = <&pbias_mmc_reg>;
 			max-frequency = <192000000>;
+			sd-uhs-sdr104;
+			sd-uhs-sdr50;
+			sd-uhs-ddr50;
+			sd-uhs-sdr25;
+			sd-uhs-sdr12;
 		};
 
 		mmc2: mmc at 480b4000 {
@@ -1079,6 +1084,10 @@
 			dma-names = "tx", "rx";
 			status = "disabled";
 			max-frequency = <192000000>;
+			sd-uhs-sdr25;
+			sd-uhs-sdr12;
+			mmc-hs200-1_8v;
+			mmc-ddr-1_8v;
 		};
 
 		mmc3: mmc at 480ad000 {
@@ -1092,6 +1101,9 @@
 			status = "disabled";
 			/* Errata i887 limits max-frequency of MMC3 to 64 MHz */
 			max-frequency = <64000000>;
+			sd-uhs-sdr12;
+			sd-uhs-sdr25;
+			sd-uhs-sdr50;
 		};
 
 		mmc4: mmc at 480d1000 {
@@ -1104,6 +1116,8 @@
 			dma-names = "tx", "rx";
 			status = "disabled";
 			max-frequency = <192000000>;
+			sd-uhs-sdr12;
+			sd-uhs-sdr25;
 		};
 
 		mmu0_dsp1: mmu at 40d01000 {
-- 
1.9.1