From: Jagan Teki <jagannadh.teki@gmail.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH 02/11] sunxi: Add I2C_SUN6I_P2WI kconfig entry
Date: Tue, 6 Feb 2018 20:45:19 +0530 [thread overview]
Message-ID: <1517930128-26181-3-git-send-email-jagan@amarulasolutions.com> (raw)
In-Reply-To: <1517930128-26181-1-git-send-email-jagan@amarulasolutions.com>
Add simple and meaningful kconfig option for p2wi.c
instead of using MACH type on Makefile.
p2wi is an I2C controller, so used the same on kconfig
definition.
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
---
arch/arm/mach-sunxi/Kconfig | 12 ++++++++++++
arch/arm/mach-sunxi/Makefile | 2 +-
2 files changed, 13 insertions(+), 1 deletion(-)
diff --git a/arch/arm/mach-sunxi/Kconfig b/arch/arm/mach-sunxi/Kconfig
index 2b9f48b..319bee1 100644
--- a/arch/arm/mach-sunxi/Kconfig
+++ b/arch/arm/mach-sunxi/Kconfig
@@ -6,6 +6,17 @@ config SPL_LDSCRIPT
config IDENT_STRING
default " Allwinner Technology"
+config I2C_SUN6I_P2WI
+ bool "Allwinner sun6i internal P2WI controller"
+ help
+ If you say yes to this option, support will be included for the
+ P2WI (Push/Pull 2 Wire Interface) controller embedded in some sunxi
+ SOCs.
+ The P2WI looks like an SMBus controller (which supports only byte
+ accesses), except that it only supports one slave device.
+ This interface is used to connect to specific PMIC devices (like the
+ AXP221).
+
config MFD_SUN6I_PRCM
bool "Allwinner A31 PRCM controller"
help
@@ -93,6 +104,7 @@ config MACH_SUN6I
select CPU_V7_HAS_NONSEC
select CPU_V7_HAS_VIRT
select ARCH_SUPPORT_PSCI
+ select I2C_SUN6I_P2WI
select MFD_SUN6I_PRCM
select SUNXI_GEN_SUN6I
select SUPPORT_SPL
diff --git a/arch/arm/mach-sunxi/Makefile b/arch/arm/mach-sunxi/Makefile
index 3c1c660..22e73d7 100644
--- a/arch/arm/mach-sunxi/Makefile
+++ b/arch/arm/mach-sunxi/Makefile
@@ -16,10 +16,10 @@ obj-y += pinmux.o
ifndef CONFIG_MACH_SUN9I
obj-y += usb_phy.o
endif
+obj-$(CONFIG_I2C_SUN6I_P2WI) += p2wi.o
obj-$(CONFIG_MFD_SUN6I_PRCM) += prcm.o
obj-$(CONFIG_MACH_SUN8I) += prcm.o
obj-$(CONFIG_MACH_SUN9I) += prcm.o
-obj-$(CONFIG_MACH_SUN6I) += p2wi.o
obj-$(CONFIG_MACH_SUN8I) += rsb.o
obj-$(CONFIG_MACH_SUN9I) += rsb.o
obj-$(CONFIG_MACH_SUN4I) += clock_sun4i.o
--
2.7.4
next prev parent reply other threads:[~2018-02-06 15:15 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-02-06 15:15 [U-Boot] [PATCH 00/11] arm: sunxi: Use proper and meaningful Kconfig entries Jagan Teki
2018-02-06 15:15 ` [U-Boot] [PATCH 01/11] sunxi: Add MFD_SUN6I_PRCM kconfig entry Jagan Teki
2018-02-06 15:15 ` Jagan Teki [this message]
2018-02-06 15:15 ` [U-Boot] [PATCH 03/11] sunxi: Use MFD_SUN6I_PRCM if used Jagan Teki
2018-02-06 15:15 ` [U-Boot] [PATCH 04/11] sunxi: Add SUNXI_RSB kconfig entry Jagan Teki
2018-02-06 15:49 ` Maxime Ripard
2018-02-09 10:39 ` Jagan Teki
2018-02-13 7:50 ` Maxime Ripard
2018-02-06 15:15 ` [U-Boot] [PATCH 05/11] sunxi: Add PMIC_SUNXI " Jagan Teki
2018-02-06 15:50 ` Maxime Ripard
2018-02-06 15:15 ` [U-Boot] [PATCH 06/11] sunxi: add DRAM_SUN6I kconfig Jagan Teki
2018-02-06 15:15 ` [U-Boot] [PATCH 07/11] sunxi: Add DRAM_SUN4I kconfig entry Jagan Teki
2018-02-06 15:15 ` [U-Boot] [PATCH 08/11] sunxi: Add DRAM_SUN9I " Jagan Teki
2018-02-06 15:15 ` [U-Boot] [PATCH 09/11] sunxi: Add DRAM_SUN8I_A23 " Jagan Teki
2018-02-06 15:15 ` [U-Boot] [PATCH 10/11] sunxi: Add DRAM_SUN8I_A33 " Jagan Teki
2018-02-06 15:15 ` [U-Boot] [PATCH 11/11] sunxi: Add DRAM_SUN8I_A83T " Jagan Teki
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1517930128-26181-3-git-send-email-jagan@amarulasolutions.com \
--to=jagannadh.teki@gmail.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.