From: Jagan Teki <jagannadh.teki@gmail.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH 05/11] sunxi: Add PMIC_SUNXI kconfig entry
Date: Tue, 6 Feb 2018 20:45:22 +0530 [thread overview]
Message-ID: <1517930128-26181-6-git-send-email-jagan@amarulasolutions.com> (raw)
In-Reply-To: <1517930128-26181-1-git-send-email-jagan@amarulasolutions.com>
Add simple and meaningful kconfig option for pmic_bus.c
instead of using MACH type on Makefile.
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
---
arch/arm/mach-sunxi/Kconfig | 6 ++++++
arch/arm/mach-sunxi/Makefile | 7 +------
drivers/power/Kconfig | 5 +++++
3 files changed, 12 insertions(+), 6 deletions(-)
diff --git a/arch/arm/mach-sunxi/Kconfig b/arch/arm/mach-sunxi/Kconfig
index 7ab1990..470ef92 100644
--- a/arch/arm/mach-sunxi/Kconfig
+++ b/arch/arm/mach-sunxi/Kconfig
@@ -23,6 +23,12 @@ config MFD_SUN6I_PRCM
Support for the PRCM (Power/Reset/Clock Management) unit available
in A31 SoC.
+config PMIC_SUNXI
+ bool "Sunxi PMIC bus access helpers"
+ help
+ Select this PMIC bus access helpers for Sunxi platform PRCM or other
+ AXP family PMIC devices.
+
config SUNXI_RSB
bool "Allwinner sunXi Reduced Serial Bus Driver"
help
diff --git a/arch/arm/mach-sunxi/Makefile b/arch/arm/mach-sunxi/Makefile
index 8f30979..921273b 100644
--- a/arch/arm/mach-sunxi/Makefile
+++ b/arch/arm/mach-sunxi/Makefile
@@ -18,6 +18,7 @@ obj-y += usb_phy.o
endif
obj-$(CONFIG_I2C_SUN6I_P2WI) += p2wi.o
obj-$(CONFIG_MFD_SUN6I_PRCM) += prcm.o
+obj-$(CONFIG_PMIC_SUNXI) += pmic_bus.o
obj-$(CONFIG_SUNXI_RSB) += rsb.o
obj-$(CONFIG_MACH_SUN4I) += clock_sun4i.o
obj-$(CONFIG_MACH_SUN5I) += clock_sun4i.o
@@ -31,12 +32,6 @@ obj-$(CONFIG_MACH_SUN8I) += clock_sun6i.o
endif
obj-$(CONFIG_MACH_SUN9I) += clock_sun9i.o gtbus_sun9i.o
-obj-$(CONFIG_AXP152_POWER) += pmic_bus.o
-obj-$(CONFIG_AXP209_POWER) += pmic_bus.o
-obj-$(CONFIG_AXP221_POWER) += pmic_bus.o
-obj-$(CONFIG_AXP809_POWER) += pmic_bus.o
-obj-$(CONFIG_AXP818_POWER) += pmic_bus.o
-
ifdef CONFIG_SPL_BUILD
obj-$(CONFIG_MACH_SUN4I) += dram_sun4i.o
obj-$(CONFIG_MACH_SUN5I) += dram_sun4i.o
diff --git a/drivers/power/Kconfig b/drivers/power/Kconfig
index d8c107e..ec453b6 100644
--- a/drivers/power/Kconfig
+++ b/drivers/power/Kconfig
@@ -22,6 +22,7 @@ config SUNXI_NO_PMIC
config AXP152_POWER
bool "axp152 pmic support"
depends on MACH_SUN5I
+ select PMIC_SUNXI
select CMD_POWEROFF
---help---
Select this to enable support for the axp152 pmic found on most
@@ -30,6 +31,7 @@ config AXP152_POWER
config AXP209_POWER
bool "axp209 pmic support"
depends on MACH_SUN4I || MACH_SUN5I || MACH_SUN7I
+ select PMIC_SUNXI
select CMD_POWEROFF
---help---
Select this to enable support for the axp209 pmic found on most
@@ -38,6 +40,7 @@ config AXP209_POWER
config AXP221_POWER
bool "axp221 / axp223 pmic support"
depends on MACH_SUN6I || MACH_SUN8I_A23 || MACH_SUN8I_A33 || MACH_SUN8I_R40
+ select PMIC_SUNXI
select CMD_POWEROFF
---help---
Select this to enable support for the axp221/axp223 pmic found on most
@@ -46,6 +49,7 @@ config AXP221_POWER
config AXP809_POWER
bool "axp809 pmic support"
depends on MACH_SUN9I
+ select PMIC_SUNXI
select CMD_POWEROFF
---help---
Say y here to enable support for the axp809 pmic found on A80 boards.
@@ -53,6 +57,7 @@ config AXP809_POWER
config AXP818_POWER
bool "axp818 pmic support"
depends on MACH_SUN8I_A83T
+ select PMIC_SUNXI
select CMD_POWEROFF
---help---
Say y here to enable support for the axp818 pmic found on
--
2.7.4
next prev parent reply other threads:[~2018-02-06 15:15 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-02-06 15:15 [U-Boot] [PATCH 00/11] arm: sunxi: Use proper and meaningful Kconfig entries Jagan Teki
2018-02-06 15:15 ` [U-Boot] [PATCH 01/11] sunxi: Add MFD_SUN6I_PRCM kconfig entry Jagan Teki
2018-02-06 15:15 ` [U-Boot] [PATCH 02/11] sunxi: Add I2C_SUN6I_P2WI " Jagan Teki
2018-02-06 15:15 ` [U-Boot] [PATCH 03/11] sunxi: Use MFD_SUN6I_PRCM if used Jagan Teki
2018-02-06 15:15 ` [U-Boot] [PATCH 04/11] sunxi: Add SUNXI_RSB kconfig entry Jagan Teki
2018-02-06 15:49 ` Maxime Ripard
2018-02-09 10:39 ` Jagan Teki
2018-02-13 7:50 ` Maxime Ripard
2018-02-06 15:15 ` Jagan Teki [this message]
2018-02-06 15:50 ` [U-Boot] [PATCH 05/11] sunxi: Add PMIC_SUNXI " Maxime Ripard
2018-02-06 15:15 ` [U-Boot] [PATCH 06/11] sunxi: add DRAM_SUN6I kconfig Jagan Teki
2018-02-06 15:15 ` [U-Boot] [PATCH 07/11] sunxi: Add DRAM_SUN4I kconfig entry Jagan Teki
2018-02-06 15:15 ` [U-Boot] [PATCH 08/11] sunxi: Add DRAM_SUN9I " Jagan Teki
2018-02-06 15:15 ` [U-Boot] [PATCH 09/11] sunxi: Add DRAM_SUN8I_A23 " Jagan Teki
2018-02-06 15:15 ` [U-Boot] [PATCH 10/11] sunxi: Add DRAM_SUN8I_A33 " Jagan Teki
2018-02-06 15:15 ` [U-Boot] [PATCH 11/11] sunxi: Add DRAM_SUN8I_A83T " Jagan Teki
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1517930128-26181-6-git-send-email-jagan@amarulasolutions.com \
--to=jagannadh.teki@gmail.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.