From: Ludovic Barre <ludovic.Barre@st.com>
To: Ulf Hansson <ulf.hansson@linaro.org>, Rob Herring <robh+dt@kernel.org>
Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com>,
Alexandre Torgue <alexandre.torgue@st.com>,
Gerald Baeza <gerald.baeza@st.com>,
<linux-arm-kernel@lists.infradead.org>,
<linux-kernel@vger.kernel.org>, <devicetree@vger.kernel.org>,
<linux-mmc@vger.kernel.org>, Ludovic Barre <ludovic.barre@st.com>
Subject: [PATCH 0/5] mmc: add stm32 sdmmc controller
Date: Thu, 15 Feb 2018 14:34:52 +0100 [thread overview]
Message-ID: <1518701697-14242-1-git-send-email-ludovic.Barre@st.com> (raw)
From: Ludovic Barre <ludovic.barre@st.com>
This patch serie adds support of stm32 SDMMC controller.
stm32h7 is the first SoC to use stm32 SDMMC controller
(previous SoC had pl180 controller).
The SDMMC features include the following:
-Full compliance with MultiMediaCard System Specification Version 4.51.
Card support for three different databus modes:
1-bit (default), 4-bit and 8-bit.
-Full compliance with SD memory card specifications version 4.1.
SDR104 speed limited to maximum allowed I/O speed, SPI mode and
UHS-II mode not supported.
-Full compliance with SDIO card specification version 4.0.
Ludovic Barre (5):
dt-bindings: mmc: document the stm32 sdmmc bindings
mmc: add stm32 sdmmc controller driver
ARM: dts: stm32: add sdmmc support for stm32h743
ARM: dts: stm32: add sdmmc1 support for stm32h743i-eval
ARM: configs: stm32: add mmc and ext2/3/4 support
.../devicetree/bindings/mmc/st,stm32-sdmmc.txt | 35 +
arch/arm/boot/dts/stm32h743-pinctrl.dtsi | 26 +
arch/arm/boot/dts/stm32h743.dtsi | 26 +
arch/arm/boot/dts/stm32h743i-eval.dts | 11 +
arch/arm/configs/stm32_defconfig | 4 +-
drivers/mmc/host/Kconfig | 8 +
drivers/mmc/host/Makefile | 1 +
drivers/mmc/host/stm32-sdmmc.c | 710 +++++++++++++++++++++
drivers/mmc/host/stm32-sdmmc.h | 220 +++++++
9 files changed, 1040 insertions(+), 1 deletion(-)
create mode 100644 Documentation/devicetree/bindings/mmc/st,stm32-sdmmc.txt
create mode 100644 drivers/mmc/host/stm32-sdmmc.c
create mode 100644 drivers/mmc/host/stm32-sdmmc.h
--
2.7.4
WARNING: multiple messages have this Message-ID (diff)
From: Ludovic Barre <ludovic.Barre@st.com>
To: Ulf Hansson <ulf.hansson@linaro.org>, Rob Herring <robh+dt@kernel.org>
Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com>,
Alexandre Torgue <alexandre.torgue@st.com>,
Gerald Baeza <gerald.baeza@st.com>,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, devicetree@vger.kernel.org,
linux-mmc@vger.kernel.org, Ludovic Barre <ludovic.barre@st.com>
Subject: [PATCH 0/5] mmc: add stm32 sdmmc controller
Date: Thu, 15 Feb 2018 14:34:52 +0100 [thread overview]
Message-ID: <1518701697-14242-1-git-send-email-ludovic.Barre@st.com> (raw)
From: Ludovic Barre <ludovic.barre@st.com>
This patch serie adds support of stm32 SDMMC controller.
stm32h7 is the first SoC to use stm32 SDMMC controller
(previous SoC had pl180 controller).
The SDMMC features include the following:
-Full compliance with MultiMediaCard System Specification Version 4.51.
Card support for three different databus modes:
1-bit (default), 4-bit and 8-bit.
-Full compliance with SD memory card specifications version 4.1.
SDR104 speed limited to maximum allowed I/O speed, SPI mode and
UHS-II mode not supported.
-Full compliance with SDIO card specification version 4.0.
Ludovic Barre (5):
dt-bindings: mmc: document the stm32 sdmmc bindings
mmc: add stm32 sdmmc controller driver
ARM: dts: stm32: add sdmmc support for stm32h743
ARM: dts: stm32: add sdmmc1 support for stm32h743i-eval
ARM: configs: stm32: add mmc and ext2/3/4 support
.../devicetree/bindings/mmc/st,stm32-sdmmc.txt | 35 +
arch/arm/boot/dts/stm32h743-pinctrl.dtsi | 26 +
arch/arm/boot/dts/stm32h743.dtsi | 26 +
arch/arm/boot/dts/stm32h743i-eval.dts | 11 +
arch/arm/configs/stm32_defconfig | 4 +-
drivers/mmc/host/Kconfig | 8 +
drivers/mmc/host/Makefile | 1 +
drivers/mmc/host/stm32-sdmmc.c | 710 +++++++++++++++++++++
drivers/mmc/host/stm32-sdmmc.h | 220 +++++++
9 files changed, 1040 insertions(+), 1 deletion(-)
create mode 100644 Documentation/devicetree/bindings/mmc/st,stm32-sdmmc.txt
create mode 100644 drivers/mmc/host/stm32-sdmmc.c
create mode 100644 drivers/mmc/host/stm32-sdmmc.h
--
2.7.4
WARNING: multiple messages have this Message-ID (diff)
From: ludovic.Barre@st.com (Ludovic Barre)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 0/5] mmc: add stm32 sdmmc controller
Date: Thu, 15 Feb 2018 14:34:52 +0100 [thread overview]
Message-ID: <1518701697-14242-1-git-send-email-ludovic.Barre@st.com> (raw)
From: Ludovic Barre <ludovic.barre@st.com>
This patch serie adds support of stm32 SDMMC controller.
stm32h7 is the first SoC to use stm32 SDMMC controller
(previous SoC had pl180 controller).
The SDMMC features include the following:
-Full compliance with MultiMediaCard System Specification Version 4.51.
Card support for three different databus modes:
1-bit (default), 4-bit and 8-bit.
-Full compliance with SD memory card specifications version 4.1.
SDR104 speed limited to maximum allowed I/O speed, SPI mode and
UHS-II mode not supported.
-Full compliance with SDIO card specification version 4.0.
Ludovic Barre (5):
dt-bindings: mmc: document the stm32 sdmmc bindings
mmc: add stm32 sdmmc controller driver
ARM: dts: stm32: add sdmmc support for stm32h743
ARM: dts: stm32: add sdmmc1 support for stm32h743i-eval
ARM: configs: stm32: add mmc and ext2/3/4 support
.../devicetree/bindings/mmc/st,stm32-sdmmc.txt | 35 +
arch/arm/boot/dts/stm32h743-pinctrl.dtsi | 26 +
arch/arm/boot/dts/stm32h743.dtsi | 26 +
arch/arm/boot/dts/stm32h743i-eval.dts | 11 +
arch/arm/configs/stm32_defconfig | 4 +-
drivers/mmc/host/Kconfig | 8 +
drivers/mmc/host/Makefile | 1 +
drivers/mmc/host/stm32-sdmmc.c | 710 +++++++++++++++++++++
drivers/mmc/host/stm32-sdmmc.h | 220 +++++++
9 files changed, 1040 insertions(+), 1 deletion(-)
create mode 100644 Documentation/devicetree/bindings/mmc/st,stm32-sdmmc.txt
create mode 100644 drivers/mmc/host/stm32-sdmmc.c
create mode 100644 drivers/mmc/host/stm32-sdmmc.h
--
2.7.4
next reply other threads:[~2018-02-15 13:36 UTC|newest]
Thread overview: 30+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-02-15 13:34 Ludovic Barre [this message]
2018-02-15 13:34 ` [PATCH 0/5] mmc: add stm32 sdmmc controller Ludovic Barre
2018-02-15 13:34 ` Ludovic Barre
2018-02-15 13:34 ` [PATCH 1/5] dt-bindings: mmc: document the stm32 sdmmc bindings Ludovic Barre
2018-02-15 13:34 ` Ludovic Barre
2018-02-15 13:34 ` Ludovic Barre
2018-02-19 14:47 ` Rob Herring
2018-02-19 14:47 ` Rob Herring
2018-02-19 14:47 ` Rob Herring
2018-02-19 15:16 ` Ludovic BARRE
2018-02-19 15:16 ` Ludovic BARRE
2018-02-19 15:16 ` Ludovic BARRE
2018-02-15 13:34 ` [PATCH 2/5] mmc: add stm32 sdmmc controller driver Ludovic Barre
2018-02-15 13:34 ` Ludovic Barre
2018-02-15 13:34 ` Ludovic Barre
2018-02-22 16:20 ` Shawn Lin
2018-02-22 16:20 ` Shawn Lin
2018-02-22 16:20 ` Shawn Lin
2018-02-26 10:35 ` Ludovic BARRE
2018-02-26 10:35 ` Ludovic BARRE
2018-02-26 10:35 ` Ludovic BARRE
2018-02-15 13:34 ` [PATCH 3/5] ARM: dts: stm32: add sdmmc support for stm32h743 Ludovic Barre
2018-02-15 13:34 ` Ludovic Barre
2018-02-15 13:34 ` Ludovic Barre
2018-02-15 13:34 ` [PATCH 4/5] ARM: dts: stm32: add sdmmc1 support for stm32h743i-eval Ludovic Barre
2018-02-15 13:34 ` Ludovic Barre
2018-02-15 13:34 ` Ludovic Barre
2018-02-15 13:34 ` [PATCH 5/5] ARM: configs: stm32: add mmc and ext2/3/4 support Ludovic Barre
2018-02-15 13:34 ` Ludovic Barre
2018-02-15 13:34 ` Ludovic Barre
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1518701697-14242-1-git-send-email-ludovic.Barre@st.com \
--to=ludovic.barre@st.com \
--cc=alexandre.torgue@st.com \
--cc=devicetree@vger.kernel.org \
--cc=gerald.baeza@st.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mmc@vger.kernel.org \
--cc=mcoquelin.stm32@gmail.com \
--cc=robh+dt@kernel.org \
--cc=ulf.hansson@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.