From: Jacopo Mondi <jacopo+renesas@jmondi.org>
To: geert@linux-m68k.org, horms@verge.net.au, magnus.damm@gmail.com,
robh+dt@kernel.org, mark.rutland@arm.com
Cc: Jacopo Mondi <jacopo+renesas@jmondi.org>,
devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-renesas-soc@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH v2 09/19] ARM64: dts: Add R-Car Salvator-x M3-N support
Date: Tue, 20 Feb 2018 16:12:11 +0100 [thread overview]
Message-ID: <1519139541-18783-10-git-send-email-jacopo+renesas@jmondi.org> (raw)
In-Reply-To: <1519139541-18783-1-git-send-email-jacopo+renesas@jmondi.org>
Add basic support for R-Car Salvator-X M3-N (R8A77965) board.
Based on original work from:
Takeshi Kihara <takeshi.kihara.df@renesas.com>
Magnus Damm <damm+renesas@opensource.se>
Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
---
v1 -> v2:
- split from patch v1 [05/15]
- Remove "aliases" and "chosen" as they are defined already
- Fix license header
---
arch/arm64/boot/dts/renesas/Makefile | 1 +
arch/arm64/boot/dts/renesas/r8a77965-salvator-x.dts | 21 +++++++++++++++++++++
2 files changed, 22 insertions(+)
create mode 100644 arch/arm64/boot/dts/renesas/r8a77965-salvator-x.dts
diff --git a/arch/arm64/boot/dts/renesas/Makefile b/arch/arm64/boot/dts/renesas/Makefile
index 2186d01..3680ecd 100644
--- a/arch/arm64/boot/dts/renesas/Makefile
+++ b/arch/arm64/boot/dts/renesas/Makefile
@@ -7,5 +7,6 @@ dtb-$(CONFIG_ARCH_R8A7795) += r8a7795-es1-h3ulcb-kf.dtb
dtb-$(CONFIG_ARCH_R8A7796) += r8a7796-salvator-x.dtb r8a7796-m3ulcb.dtb
dtb-$(CONFIG_ARCH_R8A7796) += r8a7796-m3ulcb-kf.dtb
dtb-$(CONFIG_ARCH_R8A7796) += r8a7796-salvator-xs.dtb
+dtb-$(CONFIG_ARCH_R8A77965) += r8a77965-salvator-x.dtb
dtb-$(CONFIG_ARCH_R8A77970) += r8a77970-eagle.dtb r8a77970-v3msk.dtb
dtb-$(CONFIG_ARCH_R8A77995) += r8a77995-draak.dtb
diff --git a/arch/arm64/boot/dts/renesas/r8a77965-salvator-x.dts b/arch/arm64/boot/dts/renesas/r8a77965-salvator-x.dts
new file mode 100644
index 0000000..75d890d
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r8a77965-salvator-x.dts
@@ -0,0 +1,21 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the Salvator-X board with R-Car M3-N
+ *
+ * Copyright (C) 2018 Jacopo Mondi <jacopo+renesas@jmondi.org>
+ */
+
+/dts-v1/;
+#include "r8a77965.dtsi"
+#include "salvator-x.dtsi"
+
+/ {
+ model = "Renesas Salvator-X board based on r8a77965";
+ compatible = "renesas,salvator-x", "renesas,r8a77965";
+
+ memory@48000000 {
+ device_type = "memory";
+ /* first 128MB is reserved for secure area. */
+ reg = <0x0 0x48000000 0x0 0x78000000>;
+ };
+};
--
2.7.4
WARNING: multiple messages have this Message-ID (diff)
From: Jacopo Mondi <jacopo+renesas@jmondi.org>
To: geert@linux-m68k.org, horms@verge.net.au, magnus.damm@gmail.com,
robh+dt@kernel.org, mark.rutland@arm.com
Cc: linux-renesas-soc@vger.kernel.org, devicetree@vger.kernel.org,
Jacopo Mondi <jacopo+renesas@jmondi.org>,
linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 09/19] ARM64: dts: Add R-Car Salvator-x M3-N support
Date: Tue, 20 Feb 2018 16:12:11 +0100 [thread overview]
Message-ID: <1519139541-18783-10-git-send-email-jacopo+renesas@jmondi.org> (raw)
In-Reply-To: <1519139541-18783-1-git-send-email-jacopo+renesas@jmondi.org>
Add basic support for R-Car Salvator-X M3-N (R8A77965) board.
Based on original work from:
Takeshi Kihara <takeshi.kihara.df@renesas.com>
Magnus Damm <damm+renesas@opensource.se>
Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
---
v1 -> v2:
- split from patch v1 [05/15]
- Remove "aliases" and "chosen" as they are defined already
- Fix license header
---
arch/arm64/boot/dts/renesas/Makefile | 1 +
arch/arm64/boot/dts/renesas/r8a77965-salvator-x.dts | 21 +++++++++++++++++++++
2 files changed, 22 insertions(+)
create mode 100644 arch/arm64/boot/dts/renesas/r8a77965-salvator-x.dts
diff --git a/arch/arm64/boot/dts/renesas/Makefile b/arch/arm64/boot/dts/renesas/Makefile
index 2186d01..3680ecd 100644
--- a/arch/arm64/boot/dts/renesas/Makefile
+++ b/arch/arm64/boot/dts/renesas/Makefile
@@ -7,5 +7,6 @@ dtb-$(CONFIG_ARCH_R8A7795) += r8a7795-es1-h3ulcb-kf.dtb
dtb-$(CONFIG_ARCH_R8A7796) += r8a7796-salvator-x.dtb r8a7796-m3ulcb.dtb
dtb-$(CONFIG_ARCH_R8A7796) += r8a7796-m3ulcb-kf.dtb
dtb-$(CONFIG_ARCH_R8A7796) += r8a7796-salvator-xs.dtb
+dtb-$(CONFIG_ARCH_R8A77965) += r8a77965-salvator-x.dtb
dtb-$(CONFIG_ARCH_R8A77970) += r8a77970-eagle.dtb r8a77970-v3msk.dtb
dtb-$(CONFIG_ARCH_R8A77995) += r8a77995-draak.dtb
diff --git a/arch/arm64/boot/dts/renesas/r8a77965-salvator-x.dts b/arch/arm64/boot/dts/renesas/r8a77965-salvator-x.dts
new file mode 100644
index 0000000..75d890d
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r8a77965-salvator-x.dts
@@ -0,0 +1,21 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the Salvator-X board with R-Car M3-N
+ *
+ * Copyright (C) 2018 Jacopo Mondi <jacopo+renesas@jmondi.org>
+ */
+
+/dts-v1/;
+#include "r8a77965.dtsi"
+#include "salvator-x.dtsi"
+
+/ {
+ model = "Renesas Salvator-X board based on r8a77965";
+ compatible = "renesas,salvator-x", "renesas,r8a77965";
+
+ memory@48000000 {
+ device_type = "memory";
+ /* first 128MB is reserved for secure area. */
+ reg = <0x0 0x48000000 0x0 0x78000000>;
+ };
+};
--
2.7.4
WARNING: multiple messages have this Message-ID (diff)
From: jacopo+renesas@jmondi.org (Jacopo Mondi)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 09/19] ARM64: dts: Add R-Car Salvator-x M3-N support
Date: Tue, 20 Feb 2018 16:12:11 +0100 [thread overview]
Message-ID: <1519139541-18783-10-git-send-email-jacopo+renesas@jmondi.org> (raw)
In-Reply-To: <1519139541-18783-1-git-send-email-jacopo+renesas@jmondi.org>
Add basic support for R-Car Salvator-X M3-N (R8A77965) board.
Based on original work from:
Takeshi Kihara <takeshi.kihara.df@renesas.com>
Magnus Damm <damm+renesas@opensource.se>
Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
---
v1 -> v2:
- split from patch v1 [05/15]
- Remove "aliases" and "chosen" as they are defined already
- Fix license header
---
arch/arm64/boot/dts/renesas/Makefile | 1 +
arch/arm64/boot/dts/renesas/r8a77965-salvator-x.dts | 21 +++++++++++++++++++++
2 files changed, 22 insertions(+)
create mode 100644 arch/arm64/boot/dts/renesas/r8a77965-salvator-x.dts
diff --git a/arch/arm64/boot/dts/renesas/Makefile b/arch/arm64/boot/dts/renesas/Makefile
index 2186d01..3680ecd 100644
--- a/arch/arm64/boot/dts/renesas/Makefile
+++ b/arch/arm64/boot/dts/renesas/Makefile
@@ -7,5 +7,6 @@ dtb-$(CONFIG_ARCH_R8A7795) += r8a7795-es1-h3ulcb-kf.dtb
dtb-$(CONFIG_ARCH_R8A7796) += r8a7796-salvator-x.dtb r8a7796-m3ulcb.dtb
dtb-$(CONFIG_ARCH_R8A7796) += r8a7796-m3ulcb-kf.dtb
dtb-$(CONFIG_ARCH_R8A7796) += r8a7796-salvator-xs.dtb
+dtb-$(CONFIG_ARCH_R8A77965) += r8a77965-salvator-x.dtb
dtb-$(CONFIG_ARCH_R8A77970) += r8a77970-eagle.dtb r8a77970-v3msk.dtb
dtb-$(CONFIG_ARCH_R8A77995) += r8a77995-draak.dtb
diff --git a/arch/arm64/boot/dts/renesas/r8a77965-salvator-x.dts b/arch/arm64/boot/dts/renesas/r8a77965-salvator-x.dts
new file mode 100644
index 0000000..75d890d
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r8a77965-salvator-x.dts
@@ -0,0 +1,21 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the Salvator-X board with R-Car M3-N
+ *
+ * Copyright (C) 2018 Jacopo Mondi <jacopo+renesas@jmondi.org>
+ */
+
+/dts-v1/;
+#include "r8a77965.dtsi"
+#include "salvator-x.dtsi"
+
+/ {
+ model = "Renesas Salvator-X board based on r8a77965";
+ compatible = "renesas,salvator-x", "renesas,r8a77965";
+
+ memory at 48000000 {
+ device_type = "memory";
+ /* first 128MB is reserved for secure area. */
+ reg = <0x0 0x48000000 0x0 0x78000000>;
+ };
+};
--
2.7.4
next prev parent reply other threads:[~2018-02-20 15:14 UTC|newest]
Thread overview: 185+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-02-20 15:12 [PATCH v2 00/19] R-Car M3-N initial support Jacopo Mondi
2018-02-20 15:12 ` Jacopo Mondi
2018-02-20 15:12 ` Jacopo Mondi
2018-02-20 15:12 ` [PATCH v2 01/19] clk: renesas: cpg-mssr: Add support for R-Car M3-N Jacopo Mondi
2018-02-20 15:12 ` Jacopo Mondi
2018-02-20 15:12 ` Jacopo Mondi
2018-02-20 18:46 ` Geert Uytterhoeven
2018-02-20 18:46 ` Geert Uytterhoeven
2018-02-20 18:46 ` Geert Uytterhoeven
2018-02-26 8:14 ` Geert Uytterhoeven
2018-02-26 8:14 ` Geert Uytterhoeven
2018-02-20 15:12 ` [PATCH v2 02/19] soc: renesas: rcar-rst: " Jacopo Mondi
2018-02-20 15:12 ` Jacopo Mondi
2018-02-20 15:12 ` Jacopo Mondi
2018-02-20 15:29 ` Geert Uytterhoeven
2018-02-20 15:29 ` Geert Uytterhoeven
2018-02-20 15:29 ` Geert Uytterhoeven
2018-02-21 16:45 ` Simon Horman
2018-02-21 16:45 ` Simon Horman
2018-02-21 16:45 ` Simon Horman
2018-02-20 15:12 ` [PATCH v2 03/19] soc: renesas: Identify " Jacopo Mondi
2018-02-20 15:12 ` Jacopo Mondi
2018-02-20 15:12 ` Jacopo Mondi
2018-02-20 15:40 ` Geert Uytterhoeven
2018-02-20 15:40 ` Geert Uytterhoeven
2018-02-20 15:40 ` Geert Uytterhoeven
2018-02-21 16:50 ` Simon Horman
2018-02-21 16:50 ` Simon Horman
2018-02-21 16:50 ` Simon Horman
2018-02-20 15:12 ` [PATCH v2 04/19] soc: renesas: rcar-sysc: Add R-Car M3-N support Jacopo Mondi
2018-02-20 15:12 ` Jacopo Mondi
2018-02-20 15:12 ` Jacopo Mondi
2018-02-20 15:44 ` Geert Uytterhoeven
2018-02-20 15:44 ` Geert Uytterhoeven
2018-02-20 15:44 ` Geert Uytterhoeven
2018-02-21 16:54 ` Simon Horman
2018-02-21 16:54 ` Simon Horman
2018-02-21 16:54 ` Simon Horman
2018-02-20 15:12 ` [PATCH v2 05/19] pinctrl: sh-pfc: Initial " Jacopo Mondi
2018-02-20 18:35 ` Geert Uytterhoeven
2018-02-20 18:35 ` Geert Uytterhoeven
2018-02-20 18:35 ` Geert Uytterhoeven
2018-02-20 15:12 ` [PATCH v2 06/19] dt-bindings: arm: Document R-Car M3-N SoC DT bindings Jacopo Mondi
2018-02-20 15:12 ` Jacopo Mondi
2018-02-20 15:12 ` Jacopo Mondi
2018-02-21 16:58 ` Simon Horman
2018-02-21 16:58 ` Simon Horman
2018-02-21 16:58 ` Simon Horman
2018-02-20 15:12 ` [PATCH v2 07/19] ARM64: Add Renesas R-Car M3-N config symbol Jacopo Mondi
2018-02-20 15:12 ` Jacopo Mondi
2018-02-20 15:12 ` Jacopo Mondi
2018-02-20 15:44 ` Geert Uytterhoeven
2018-02-20 15:44 ` Geert Uytterhoeven
2018-02-20 15:44 ` Geert Uytterhoeven
2018-02-21 17:03 ` Simon Horman
2018-02-21 17:03 ` Simon Horman
2018-02-21 17:03 ` Simon Horman
2018-02-20 15:12 ` [PATCH v2 08/19] ARM64: dts: Add Renesas R8A77965 SoC support Jacopo Mondi
2018-02-20 15:12 ` Jacopo Mondi
2018-02-20 15:12 ` Jacopo Mondi
2018-02-20 15:45 ` Geert Uytterhoeven
2018-02-20 15:45 ` Geert Uytterhoeven
2018-02-20 15:45 ` Geert Uytterhoeven
2018-02-21 17:06 ` Simon Horman
2018-02-21 17:06 ` Simon Horman
2018-02-21 17:06 ` Simon Horman
2018-02-20 15:12 ` Jacopo Mondi [this message]
2018-02-20 15:12 ` [PATCH v2 09/19] ARM64: dts: Add R-Car Salvator-x M3-N support Jacopo Mondi
2018-02-20 15:12 ` Jacopo Mondi
2018-02-20 15:46 ` Geert Uytterhoeven
2018-02-20 15:46 ` Geert Uytterhoeven
2018-02-20 15:46 ` Geert Uytterhoeven
2018-02-21 17:15 ` Simon Horman
2018-02-21 17:15 ` Simon Horman
2018-02-21 17:15 ` Simon Horman
2018-02-22 11:39 ` Arnd Bergmann
2018-02-22 11:39 ` Arnd Bergmann
2018-02-22 11:39 ` Arnd Bergmann
2018-02-22 13:28 ` Geert Uytterhoeven
2018-02-22 13:28 ` Geert Uytterhoeven
2018-02-22 13:28 ` Geert Uytterhoeven
2018-02-22 15:38 ` Simon Horman
2018-02-22 15:38 ` Simon Horman
2018-02-22 15:38 ` Simon Horman
2018-02-22 15:46 ` Arnd Bergmann
2018-02-22 15:46 ` Arnd Bergmann
2018-02-22 15:46 ` Arnd Bergmann
2018-02-20 15:12 ` [PATCH v2 10/19] dt-bindings: dmaengine: rcar-dmac: document R8A77965 support Jacopo Mondi
2018-02-20 15:12 ` Jacopo Mondi
2018-02-20 15:12 ` Jacopo Mondi
2018-03-01 21:50 ` Rob Herring
2018-03-01 21:50 ` Rob Herring
2018-04-16 11:09 ` Geert Uytterhoeven
2018-04-16 11:09 ` Geert Uytterhoeven
2018-02-20 15:12 ` [PATCH v2 11/19] ARM64: dts: r8a77965: Add dmac device nods Jacopo Mondi
2018-02-20 15:12 ` Jacopo Mondi
2018-02-20 15:12 ` Jacopo Mondi
2018-02-21 17:18 ` Simon Horman
2018-02-21 17:18 ` Simon Horman
2018-02-21 17:18 ` Simon Horman
2018-02-20 15:12 ` [PATCH v2 12/19] dt-bindings: serial: sh-sci: Add support for r8a77965 (H)SCIF Jacopo Mondi
2018-02-20 15:12 ` Jacopo Mondi
2018-02-20 15:12 ` Jacopo Mondi
2018-02-20 15:46 ` Geert Uytterhoeven
2018-02-20 15:46 ` Geert Uytterhoeven
2018-02-20 15:46 ` Geert Uytterhoeven
2018-02-21 17:18 ` Simon Horman
2018-02-21 17:18 ` Simon Horman
2018-02-21 17:18 ` Simon Horman
2018-03-01 21:50 ` Rob Herring
2018-03-01 21:50 ` Rob Herring
2018-02-20 15:12 ` [PATCH v2 13/19] pinctrl: sh-pfc: r8a77965: Add SCIFs groups/functions Jacopo Mondi
2018-02-20 15:12 ` Jacopo Mondi
2018-02-20 15:12 ` Jacopo Mondi
2018-02-20 18:36 ` Geert Uytterhoeven
2018-02-20 18:36 ` Geert Uytterhoeven
2018-02-20 18:36 ` Geert Uytterhoeven
2018-02-20 15:12 ` [PATCH v2 14/19] ARM64: dts: r8a77965: Add SCIF device nodes Jacopo Mondi
2018-02-21 17:20 ` Simon Horman
2018-02-21 17:20 ` Simon Horman
2018-02-21 17:20 ` Simon Horman
2018-02-20 15:12 ` [PATCH v2 15/19] dt-bindings: gpio: Add support for r8a77965 Jacopo Mondi
2018-02-20 15:12 ` Jacopo Mondi
2018-02-20 15:12 ` Jacopo Mondi
2018-02-21 17:20 ` Simon Horman
2018-02-21 17:20 ` Simon Horman
2018-02-21 17:20 ` Simon Horman
2018-03-01 21:51 ` Rob Herring
2018-03-01 21:51 ` Rob Herring
2018-04-16 11:12 ` Geert Uytterhoeven
2018-04-16 11:12 ` Geert Uytterhoeven
2018-04-16 13:07 ` jacopo mondi
2018-04-16 13:07 ` jacopo mondi
2018-02-20 15:12 ` [PATCH v2 16/19] ARM64: dts: r8a77965: Add GPIO nodes Jacopo Mondi
2018-02-20 15:12 ` Jacopo Mondi
2018-02-20 15:12 ` Jacopo Mondi
2018-02-21 17:26 ` Simon Horman
2018-02-21 17:26 ` Simon Horman
2018-02-21 17:26 ` Simon Horman
2018-02-20 15:12 ` [PATCH v2 17/19] dt-bindings: net: ravb: Add support for r8a77965 SoC Jacopo Mondi
2018-02-20 15:12 ` Jacopo Mondi
2018-02-20 15:12 ` Jacopo Mondi
2018-03-01 21:52 ` Rob Herring
2018-03-01 21:52 ` Rob Herring
2018-02-20 15:12 ` [PATCH v2 18/19] pinctrl: sh-pfc: r8a77965: Add EtherAVB groups/functions Jacopo Mondi
2018-02-20 18:36 ` Geert Uytterhoeven
2018-02-20 18:36 ` Geert Uytterhoeven
2018-02-20 18:36 ` Geert Uytterhoeven
2018-02-20 15:12 ` [PATCH v2 19/19] ARM64: dts: r8a77965: Add EtherAVB device node Jacopo Mondi
2018-02-20 15:30 ` Sergei Shtylyov
2018-02-20 15:30 ` Sergei Shtylyov
2018-02-20 15:30 ` Sergei Shtylyov
2018-02-21 10:07 ` jacopo mondi
2018-02-21 10:07 ` jacopo mondi
2018-02-21 10:07 ` jacopo mondi
2018-02-21 15:48 ` Sergei Shtylyov
2018-02-21 15:48 ` Sergei Shtylyov
2018-02-21 15:48 ` Sergei Shtylyov
2018-02-21 17:31 ` Simon Horman
2018-02-21 17:31 ` Simon Horman
2018-02-21 17:31 ` Simon Horman
2018-02-21 17:38 ` Sergei Shtylyov
2018-02-21 17:38 ` Sergei Shtylyov
2018-02-21 17:38 ` Sergei Shtylyov
2018-02-21 17:53 ` Sergei Shtylyov
2018-02-21 17:53 ` Sergei Shtylyov
2018-02-21 17:53 ` Sergei Shtylyov
2018-02-21 18:23 ` Simon Horman
2018-02-21 18:23 ` Simon Horman
2018-02-21 18:23 ` Simon Horman
2018-02-21 18:53 ` Sergei Shtylyov
2018-02-21 18:53 ` Sergei Shtylyov
2018-02-21 18:53 ` Sergei Shtylyov
2018-02-22 15:54 ` Simon Horman
2018-02-22 15:54 ` Simon Horman
2018-02-22 15:54 ` Simon Horman
2018-02-22 19:08 ` Sergei Shtylyov
2018-02-22 19:08 ` Sergei Shtylyov
2018-02-22 19:08 ` Sergei Shtylyov
2018-02-23 7:06 ` Geert Uytterhoeven
2018-02-23 7:06 ` Geert Uytterhoeven
2018-02-23 7:06 ` Geert Uytterhoeven
2018-02-23 15:07 ` Simon Horman
2018-02-23 15:07 ` Simon Horman
2018-02-23 15:07 ` Simon Horman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1519139541-18783-10-git-send-email-jacopo+renesas@jmondi.org \
--to=jacopo+renesas@jmondi.org \
--cc=devicetree@vger.kernel.org \
--cc=geert@linux-m68k.org \
--cc=horms@verge.net.au \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-renesas-soc@vger.kernel.org \
--cc=magnus.damm@gmail.com \
--cc=mark.rutland@arm.com \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.