All of lore.kernel.org
 help / color / mirror / Atom feed
From: Oza Pawandeep <poza@codeaurora.org>
To: Bjorn Helgaas <bhelgaas@google.com>,
	Philippe Ombredanne <pombredanne@nexb.com>,
	Thomas Gleixner <tglx@linutronix.de>,
	Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
	Kate Stewart <kstewart@linuxfoundation.org>,
	linux-pci@vger.kernel.org, linux-kernel@vger.kernel.org,
	Dongdong Liu <liudongdong3@huawei.com>,
	Keith Busch <keith.busch@intel.com>, Wei Zhang <wzhang@fb.com>,
	Sinan Kaya <okaya@codeaurora.org>,
	Timur Tabi <timur@codeaurora.org>
Cc: Oza Pawandeep <poza@codeaurora.org>
Subject: [PATCH v10 6/7] PCI: Unify wait for link active into generic pci
Date: Thu, 22 Feb 2018 21:32:11 +0530	[thread overview]
Message-ID: <1519315332-26852-7-git-send-email-poza@codeaurora.org> (raw)
In-Reply-To: <1519315332-26852-1-git-send-email-poza@codeaurora.org>

Clients such as pciehp, dpc are using pcie_wait_link_active, which waits
till the link becomes active or inactive.

Made generic function and moved it to drivers/pci/pci.c

Signed-off-by: Oza Pawandeep <poza@codeaurora.org>

diff --git a/drivers/pci/hotplug/pciehp_hpc.c b/drivers/pci/hotplug/pciehp_hpc.c
index 18a42f8..de9b0ea 100644
--- a/drivers/pci/hotplug/pciehp_hpc.c
+++ b/drivers/pci/hotplug/pciehp_hpc.c
@@ -231,25 +231,11 @@ bool pciehp_check_link_active(struct controller *ctrl)
 	return ret;
 }
 
-static void __pcie_wait_link_active(struct controller *ctrl, bool active)
+static bool pcie_wait_link_active(struct controller *ctrl)
 {
-	int timeout = 1000;
-
-	if (pciehp_check_link_active(ctrl) == active)
-		return;
-	while (timeout > 0) {
-		msleep(10);
-		timeout -= 10;
-		if (pciehp_check_link_active(ctrl) == active)
-			return;
-	}
-	ctrl_dbg(ctrl, "Data Link Layer Link Active not %s in 1000 msec\n",
-			active ? "set" : "cleared");
-}
+	struct pci_dev *pdev = ctrl_dev(ctrl);
 
-static void pcie_wait_link_active(struct controller *ctrl)
-{
-	__pcie_wait_link_active(ctrl, true);
+	return pci_wait_for_link(pdev, true);
 }
 
 static bool pci_bus_check_dev(struct pci_bus *bus, int devfn)
diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
index f6a4dd1..5440696 100644
--- a/drivers/pci/pci.c
+++ b/drivers/pci/pci.c
@@ -4176,6 +4176,40 @@ static int pci_pm_reset(struct pci_dev *dev, int probe)
 	return 0;
 }
 
+/**
+ * pci__wait_for_link - Wait for link till its active/inactive
+ * @pdev: Bridge device
+ * @active: waiting for active or inactive ?
+ *
+ * Use this to wait till link becomes active or inactive.
+ */
+bool pci_wait_for_link(struct pci_dev *pdev, bool active)
+{
+	int timeout = 1000;
+	bool ret;
+	u16 lnk_status;
+
+	pcie_capability_read_word(pdev, PCI_EXP_LNKSTA, &lnk_status);
+	ret = !!(lnk_status & PCI_EXP_LNKSTA_DLLLA);
+
+	while ((ret != active) && (timeout > 0)) {
+		msleep(10);
+		timeout -= 10;
+		pcie_capability_read_word(pdev, PCI_EXP_LNKSTA, &lnk_status);
+		ret = !!(lnk_status & PCI_EXP_LNKSTA_DLLLA);
+	}
+
+	if (ret == active)
+		return true;
+
+	dev_printk(KERN_DEBUG, &pdev->dev,
+		   "Data Link Layer Link Active not %s in 1000 msec\n",
+		   active ? "set" : "cleared");
+
+	return false;
+}
+EXPORT_SYMBOL(pci_wait_for_link);
+
 void pci_reset_secondary_bus(struct pci_dev *dev)
 {
 	u16 ctrl;
diff --git a/drivers/pci/pcie/pcie-dpc.c b/drivers/pci/pcie/pcie-dpc.c
index 208b427..0524bd3 100644
--- a/drivers/pci/pcie/pcie-dpc.c
+++ b/drivers/pci/pcie/pcie-dpc.c
@@ -122,19 +122,9 @@ static int dpc_wait_rp_inactive(struct dpc_dev *dpc)
 
 static void dpc_wait_link_inactive(struct dpc_dev *dpc)
 {
-	unsigned long timeout = jiffies + HZ;
 	struct pci_dev *pdev = dpc->dev->port;
-	struct device *dev = &dpc->dev->device;
-	u16 lnk_status;
 
-	pcie_capability_read_word(pdev, PCI_EXP_LNKSTA, &lnk_status);
-	while (lnk_status & PCI_EXP_LNKSTA_DLLLA &&
-					!time_after(jiffies, timeout)) {
-		msleep(10);
-		pcie_capability_read_word(pdev, PCI_EXP_LNKSTA, &lnk_status);
-	}
-	if (lnk_status & PCI_EXP_LNKSTA_DLLLA)
-		dev_warn(dev, "Link state not disabled for DPC event\n");
+	pci_wait_for_link(pdev, false);
 }
 
 /**
diff --git a/include/linux/pci.h b/include/linux/pci.h
index 024a1be..cb674c3 100644
--- a/include/linux/pci.h
+++ b/include/linux/pci.h
@@ -1195,6 +1195,7 @@ int pci_add_ext_cap_save_buffer(struct pci_dev *dev,
 int pci_request_selected_regions(struct pci_dev *, int, const char *);
 int pci_request_selected_regions_exclusive(struct pci_dev *, int, const char *);
 void pci_release_selected_regions(struct pci_dev *, int);
+bool pci_wait_for_link(struct pci_dev *pdev, bool active);
 
 /* drivers/pci/bus.c */
 struct pci_bus *pci_bus_get(struct pci_bus *bus);
-- 
Qualcomm Datacenter Technologies, Inc. as an affiliate of Qualcomm Technologies, Inc.,
a Qualcomm Technologies, Inc. is a member of the Code Aurora Forum, a Linux Foundation Collaborative Project.

  parent reply	other threads:[~2018-02-22 16:02 UTC|newest]

Thread overview: 19+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-02-22 16:02 [PATCH v10 0/7] Address error and recovery for AER and DPC Oza Pawandeep
2018-02-22 16:02 ` [PATCH v10 1/7] PCI/AER: Rename error recovery to generic pci naming Oza Pawandeep
2018-02-22 18:34   ` Christoph Hellwig
2018-02-23  5:24     ` poza
2018-02-22 16:02 ` [PATCH v10 2/7] PCI/AER: factor out error reporting from AER Oza Pawandeep
2018-02-22 18:34   ` Christoph Hellwig
2018-02-22 18:42     ` David Laight
2018-02-22 16:02 ` [PATCH v10 3/7] PCI/ERR: add mutex to synchronize recovery Oza Pawandeep
2018-02-22 18:36   ` Christoph Hellwig
2018-02-23  5:27     ` poza
2018-02-22 16:02 ` [PATCH v10 4/7] PCI/DPC: Unify and plumb error handling into DPC Oza Pawandeep
2018-02-22 18:39   ` Christoph Hellwig
2018-02-23  5:28     ` poza
2018-02-22 16:02 ` [PATCH v10 5/7] PCI/AER: Unify aer error defines at single space Oza Pawandeep
2018-02-22 16:06   ` poza
2018-02-22 16:02 ` Oza Pawandeep [this message]
2018-02-22 18:43   ` [PATCH v10 6/7] PCI: Unify wait for link active into generic pci Christoph Hellwig
2018-02-23  6:53     ` poza
2018-02-22 16:02 ` [PATCH v10 7/7] PCI/DPC: Enumerate the devices after DPC trigger event Oza Pawandeep

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1519315332-26852-7-git-send-email-poza@codeaurora.org \
    --to=poza@codeaurora.org \
    --cc=bhelgaas@google.com \
    --cc=gregkh@linuxfoundation.org \
    --cc=keith.busch@intel.com \
    --cc=kstewart@linuxfoundation.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pci@vger.kernel.org \
    --cc=liudongdong3@huawei.com \
    --cc=okaya@codeaurora.org \
    --cc=pombredanne@nexb.com \
    --cc=tglx@linutronix.de \
    --cc=timur@codeaurora.org \
    --cc=wzhang@fb.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.