* [PATCH for-4.16 V2 1/2] brcmfmac: add possibility to obtain firmware error
2018-02-28 9:59 [PATCH for-4.16 V2 0/2] brcmfmac: small fixes Arend van Spriel
@ 2018-02-28 9:59 ` Arend van Spriel
2018-02-28 9:59 ` [PATCH for-4.16 V2 2/2] brcmfmac: fix P2P_DEVICE ethernet address generation Arend van Spriel
1 sibling, 0 replies; 3+ messages in thread
From: Arend van Spriel @ 2018-02-28 9:59 UTC (permalink / raw)
To: Kalle Valo; +Cc: linux-wireless, Arend van Spriel
The feature module needs to evaluate the actual firmware error return
upon a control command. This adds a flag to struct brcmf_if that the
caller can set. This flag is checked to determine the error code that
needs to be returned.
Fixes: b69c1df47281 ("brcmfmac: separate firmware errors from i/o errors")
Reviewed-by: Hante Meuleman <hante.meuleman@broadcom.com>
Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com>
Reviewed-by: Franky Lin <franky.lin@broadcom.com>
Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com>
---
drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.h | 2 ++
drivers/net/wireless/broadcom/brcm80211/brcmfmac/feature.c | 10 ++++++++++
drivers/net/wireless/broadcom/brcm80211/brcmfmac/fwil.c | 3 +++
3 files changed, 15 insertions(+)
diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.h b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.h
index df8a1ec..232dcbb 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.h
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.h
@@ -181,6 +181,7 @@ enum brcmf_netif_stop_reason {
* @netif_stop_lock: spinlock for update netif_stop from multiple sources.
* @pend_8021x_cnt: tracks outstanding number of 802.1x frames.
* @pend_8021x_wait: used for signalling change in count.
+ * @fwil_fwerr: flag indicating fwil layer should return firmware error codes.
*/
struct brcmf_if {
struct brcmf_pub *drvr;
@@ -198,6 +199,7 @@ struct brcmf_if {
wait_queue_head_t pend_8021x_wait;
struct in6_addr ipv6_addr_tbl[NDOL_MAX_ENTRIES];
u8 ipv6addr_idx;
+ bool fwil_fwerr;
};
int brcmf_netdev_wait_pend8021x(struct brcmf_if *ifp);
diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/feature.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/feature.c
index 47de35a..bede7b7 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/feature.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/feature.c
@@ -104,6 +104,9 @@ static void brcmf_feat_iovar_int_get(struct brcmf_if *ifp,
u32 data;
int err;
+ /* we need to know firmware error */
+ ifp->fwil_fwerr = true;
+
err = brcmf_fil_iovar_int_get(ifp, name, &data);
if (err == 0) {
brcmf_dbg(INFO, "enabling feature: %s\n", brcmf_feat_names[id]);
@@ -112,6 +115,8 @@ static void brcmf_feat_iovar_int_get(struct brcmf_if *ifp,
brcmf_dbg(TRACE, "%s feature check failed: %d\n",
brcmf_feat_names[id], err);
}
+
+ ifp->fwil_fwerr = false;
}
static void brcmf_feat_iovar_data_set(struct brcmf_if *ifp,
@@ -120,6 +125,9 @@ static void brcmf_feat_iovar_data_set(struct brcmf_if *ifp,
{
int err;
+ /* we need to know firmware error */
+ ifp->fwil_fwerr = true;
+
err = brcmf_fil_iovar_data_set(ifp, name, data, len);
if (err != -BRCMF_FW_UNSUPPORTED) {
brcmf_dbg(INFO, "enabling feature: %s\n", brcmf_feat_names[id]);
@@ -128,6 +136,8 @@ static void brcmf_feat_iovar_data_set(struct brcmf_if *ifp,
brcmf_dbg(TRACE, "%s feature check failed: %d\n",
brcmf_feat_names[id], err);
}
+
+ ifp->fwil_fwerr = false;
}
#define MAX_CAPS_BUFFER_SIZE 512
diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/fwil.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/fwil.c
index f2cfdd3..fc57511 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/fwil.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/fwil.c
@@ -131,6 +131,9 @@ static const char *brcmf_fil_get_errstr(u32 err)
brcmf_fil_get_errstr((u32)(-fwerr)), fwerr);
err = -EBADE;
}
+ if (ifp->fwil_fwerr)
+ return fwerr;
+
return err;
}
--
1.9.1
^ permalink raw reply related [flat|nested] 3+ messages in thread* [PATCH for-4.16 V2 2/2] brcmfmac: fix P2P_DEVICE ethernet address generation
2018-02-28 9:59 [PATCH for-4.16 V2 0/2] brcmfmac: small fixes Arend van Spriel
2018-02-28 9:59 ` [PATCH for-4.16 V2 1/2] brcmfmac: add possibility to obtain firmware error Arend van Spriel
@ 2018-02-28 9:59 ` Arend van Spriel
1 sibling, 0 replies; 3+ messages in thread
From: Arend van Spriel @ 2018-02-28 9:59 UTC (permalink / raw)
To: Kalle Valo; +Cc: linux-wireless, Arend van Spriel
The firmware has a requirement that the P2P_DEVICE address should
be different from the address of the primary interface. When not
specified by user-space, the driver generates the MAC address for
the P2P_DEVICE interface using the MAC address of the primary
interface and setting the locally administered bit. However, the MAC
address of the primary interface may already have that bit set causing
the creation of the P2P_DEVICE interface to fail with -EBUSY. Fix this
by using the permanent address instead to determing the P2P_DEVICE
address.
Cc: stable@vger.kernel.org # 3.10.y
Reported-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Hante Meuleman <hante.meuleman@broadcom.com>
Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com>
Reviewed-by: Franky Lin <franky.lin@broadcom.com>
Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com>
---
drivers/net/wireless/broadcom/brcm80211/brcmfmac/p2p.c | 10 +++++-----
1 file changed, 5 insertions(+), 5 deletions(-)
diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/p2p.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/p2p.c
index 2ee5413..ddbb386 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/p2p.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/p2p.c
@@ -462,8 +462,8 @@ static int brcmf_p2p_set_firmware(struct brcmf_if *ifp, u8 *p2p_mac)
* @dev_addr: optional device address.
*
* P2P needs mac addresses for P2P device and interface. If no device
- * address it specified, these are derived from the primary net device, ie.
- * the permanent ethernet address of the device.
+ * address it specified, these are derived from the permanent ethernet
+ * address of the device.
*/
static void brcmf_p2p_generate_bss_mac(struct brcmf_p2p_info *p2p, u8 *dev_addr)
{
@@ -471,12 +471,12 @@ static void brcmf_p2p_generate_bss_mac(struct brcmf_p2p_info *p2p, u8 *dev_addr)
bool local_admin = false;
if (!dev_addr || is_zero_ether_addr(dev_addr)) {
- dev_addr = pri_ifp->mac_addr;
+ dev_addr = pri_ifp->drvr->mac;
local_admin = true;
}
/* Generate the P2P Device Address. This consists of the device's
- * primary MAC address with the locally administered bit set.
+ * permanent ethernet address with the locally administered bit set.
*/
memcpy(p2p->dev_addr, dev_addr, ETH_ALEN);
if (local_admin)
@@ -486,7 +486,7 @@ static void brcmf_p2p_generate_bss_mac(struct brcmf_p2p_info *p2p, u8 *dev_addr)
* BSSCFGs need to simultaneously co-exist, then this address must be
* different from the P2P Device Address, but also locally administered.
*/
- memcpy(p2p->int_addr, p2p->dev_addr, ETH_ALEN);
+ memcpy(p2p->int_addr, dev_addr, ETH_ALEN);
p2p->int_addr[0] |= 0x02;
p2p->int_addr[4] ^= 0x80;
}
--
1.9.1
^ permalink raw reply related [flat|nested] 3+ messages in thread