[PATCHv2 00/17] drm/omap: misc patches

[PATCHv2 00/17] drm/omap: misc patches

[Tomi Valkeinen]

Hi,

This is v2 of the series.

I've rebased these on top of Laurent's latest patches. I also dropped most of
Peter's patches, as they need rebasing and some work. I think I addressed all
of Laurent's comments to the patches in this v2.

 Tomi

Benoit Parrot (2):
  drm/omap: dispc: disp_wb_setup to check return code
  drm/omap: Add pclk setting case when channel is DSS_WB

Jyri Sarha (1):
  drm/omap: Allow HDMI audio setup even if we do not have video
    configured

Peter Ujfalusi (1):
  drm/omap: Init fbdev emulation only when we have displays

Tomi Valkeinen (13):
  drm/omap: fix omap_fbdev_free() when omap_fbdev_create() wasn't called
  drm/omap: cleanup fbdev init/free
  drm/omap: add HPD support to connector-dvi
  dt-bindings: display: add HPD gpio to DVI connector
  drm/omap: remove leftover enums
  drm/omap: set WB channel-in in wb_setup()
  drm/omap: fix WBDELAYCOUNT for HDMI
  drm/omap: fix WBDELAYCOUNT with interlace
  drm/omap: fix WB height with interlace
  drm/omap: fix scaling limits for WB
  drm/omap: add writeback funcs to dispc_ops
  drm/omap: fix maximum sizes
  drm/omap: cleanup color space conversion

 .../bindings/display/connector/dvi-connector.txt   |   1 +
 drivers/gpu/drm/omapdrm/displays/connector-dvi.c   | 118 +++++++++++++++
 drivers/gpu/drm/omapdrm/dss/dispc.c                | 160 +++++++++++++++------
 drivers/gpu/drm/omapdrm/dss/dss.h                  |  20 ---
 drivers/gpu/drm/omapdrm/dss/hdmi4.c                |  33 ++---
 drivers/gpu/drm/omapdrm/dss/hdmi5.c                |  37 +++--
 drivers/gpu/drm/omapdrm/dss/omapdss.h              |  35 +++--
 drivers/gpu/drm/omapdrm/omap_drv.c                 |  20 +--
 drivers/gpu/drm/omapdrm/omap_fbdev.c               |  24 ++--
 drivers/gpu/drm/omapdrm/omap_fbdev.h               |   9 +-
 10 files changed, 311 insertions(+), 146 deletions(-)

-- 
Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki.
Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

[PATCHv2 01/17] drm/omap: fix omap_fbdev_free() when omap_fbdev_create() wasn't called

[Tomi Valkeinen]

If we have no crtcs/connectors, fbdev init goes fine, but
omap_fbdev_create() is never called. This means that omap_fbdev->bo is
NULL and omap_fbdev_free() crashes.

Add a check to omap_fbdev_free() to handle the NULL case.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
---
 drivers/gpu/drm/omapdrm/omap_fbdev.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/omapdrm/omap_fbdev.c b/drivers/gpu/drm/omapdrm/omap_fbdev.c
index 1ace63e2ff22..632ebcf2165f 100644
--- a/drivers/gpu/drm/omapdrm/omap_fbdev.c
+++ b/drivers/gpu/drm/omapdrm/omap_fbdev.c
@@ -303,7 +303,8 @@ void omap_fbdev_free(struct drm_device *dev)
 	fbdev = to_omap_fbdev(priv->fbdev);
 
 	/* unpin the GEM object pinned in omap_fbdev_create() */
-	omap_gem_unpin(fbdev->bo);
+	if (fbdev->bo)
+		omap_gem_unpin(fbdev->bo);
 
 	/* this will free the backing object */
 	if (fbdev->fb)
-- 
Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki.
Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

Re: [PATCHv2 01/17] drm/omap: fix omap_fbdev_free() when omap_fbdev_create() wasn't called

[Sebastian Reichel]

[-- Attachment #1.1: Type: text/plain, Size: 1514 bytes --]

Hi,

On Wed, Feb 28, 2018 at 01:25:58PM +0200, Tomi Valkeinen wrote:
> If we have no crtcs/connectors, fbdev init goes fine, but
> omap_fbdev_create() is never called. This means that omap_fbdev->bo is
> NULL and omap_fbdev_free() crashes.
> 
> Add a check to omap_fbdev_free() to handle the NULL case.
> 
> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
> ---

Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>

-- Sebastian

>  drivers/gpu/drm/omapdrm/omap_fbdev.c | 3 ++-
>  1 file changed, 2 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/gpu/drm/omapdrm/omap_fbdev.c b/drivers/gpu/drm/omapdrm/omap_fbdev.c
> index 1ace63e2ff22..632ebcf2165f 100644
> --- a/drivers/gpu/drm/omapdrm/omap_fbdev.c
> +++ b/drivers/gpu/drm/omapdrm/omap_fbdev.c
> @@ -303,7 +303,8 @@ void omap_fbdev_free(struct drm_device *dev)
>  	fbdev = to_omap_fbdev(priv->fbdev);
>  
>  	/* unpin the GEM object pinned in omap_fbdev_create() */
> -	omap_gem_unpin(fbdev->bo);
> +	if (fbdev->bo)
> +		omap_gem_unpin(fbdev->bo);
>  
>  	/* this will free the backing object */
>  	if (fbdev->fb)
> -- 
> Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki.
> Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki
> 
> _______________________________________________
> dri-devel mailing list
> dri-devel@lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/dri-devel

[-- Attachment #1.2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]

[-- Attachment #2: Type: text/plain, Size: 160 bytes --]

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

[PATCHv2 02/17] drm/omap: cleanup fbdev init/free

[Tomi Valkeinen]

omap_fbdev_init() and omap_fbdev_free() use priv->fbdev directly.
However, omap_fbdev_init() returns the fbdev, and omap_drv.c also
assigns the return value to priv->fbdev. This is slightly confusing.

Clean this up by removing the omap_fbdev_init() return value, as we
don't care whether fbdev init succeeded or not. Also change omap_drv.c
to call omap_fbdev_free() always, and omap_fbdev_free() does the check
if fbdev was initialized.

While at it, rename omap_fbdev_free() to omap_fbdev_fini() to better
match the "init" counterpart.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
 drivers/gpu/drm/omapdrm/omap_drv.c   |  9 ++++-----
 drivers/gpu/drm/omapdrm/omap_fbdev.c | 18 ++++++++----------
 drivers/gpu/drm/omapdrm/omap_fbdev.h |  9 ++++-----
 3 files changed, 16 insertions(+), 20 deletions(-)

diff --git a/drivers/gpu/drm/omapdrm/omap_drv.c b/drivers/gpu/drm/omapdrm/omap_drv.c
index 65a567dcf3ab..4f48b908bdc6 100644
--- a/drivers/gpu/drm/omapdrm/omap_drv.c
+++ b/drivers/gpu/drm/omapdrm/omap_drv.c
@@ -570,7 +570,7 @@ static int omapdrm_init(struct omap_drm_private *priv, struct device *dev)
 	for (i = 0; i < priv->num_crtcs; i++)
 		drm_crtc_vblank_off(priv->crtcs[i]);
 
-	priv->fbdev = omap_fbdev_init(ddev);
+	omap_fbdev_init(ddev);
 
 	drm_kms_helper_poll_init(ddev);
 	omap_modeset_enable_external_hpd();
@@ -588,8 +588,8 @@ static int omapdrm_init(struct omap_drm_private *priv, struct device *dev)
 err_cleanup_helpers:
 	omap_modeset_disable_external_hpd();
 	drm_kms_helper_poll_fini(ddev);
-	if (priv->fbdev)
-		omap_fbdev_free(ddev);
+
+	omap_fbdev_fini(ddev);
 err_cleanup_modeset:
 	drm_mode_config_cleanup(ddev);
 	omap_drm_irq_uninstall(ddev);
@@ -615,8 +615,7 @@ static void omapdrm_cleanup(struct omap_drm_private *priv)
 	omap_modeset_disable_external_hpd();
 	drm_kms_helper_poll_fini(ddev);
 
-	if (priv->fbdev)
-		omap_fbdev_free(ddev);
+	omap_fbdev_fini(ddev);
 
 	drm_atomic_helper_shutdown(ddev);
 
diff --git a/drivers/gpu/drm/omapdrm/omap_fbdev.c b/drivers/gpu/drm/omapdrm/omap_fbdev.c
index 632ebcf2165f..be94480326d7 100644
--- a/drivers/gpu/drm/omapdrm/omap_fbdev.c
+++ b/drivers/gpu/drm/omapdrm/omap_fbdev.c
@@ -242,7 +242,7 @@ static struct drm_fb_helper *get_fb(struct fb_info *fbi)
 }
 
 /* initialize fbdev helper */
-struct drm_fb_helper *omap_fbdev_init(struct drm_device *dev)
+void omap_fbdev_init(struct drm_device *dev)
 {
 	struct omap_drm_private *priv = dev->dev_private;
 	struct omap_fbdev *fbdev = NULL;
@@ -260,10 +260,8 @@ struct drm_fb_helper *omap_fbdev_init(struct drm_device *dev)
 	drm_fb_helper_prepare(dev, helper, &omap_fb_helper_funcs);
 
 	ret = drm_fb_helper_init(dev, helper, priv->num_connectors);
-	if (ret) {
-		dev_err(dev->dev, "could not init fbdev: ret=%d\n", ret);
+	if (ret)
 		goto fail;
-	}
 
 	ret = drm_fb_helper_single_add_all_connectors(helper);
 	if (ret)
@@ -275,7 +273,7 @@ struct drm_fb_helper *omap_fbdev_init(struct drm_device *dev)
 
 	priv->fbdev = helper;
 
-	return helper;
+	return;
 
 fini:
 	drm_fb_helper_fini(helper);
@@ -283,12 +281,9 @@ struct drm_fb_helper *omap_fbdev_init(struct drm_device *dev)
 	kfree(fbdev);
 
 	dev_warn(dev->dev, "omap_fbdev_init failed\n");
-	/* well, limp along without an fbdev.. maybe X11 will work? */
-
-	return NULL;
 }
 
-void omap_fbdev_free(struct drm_device *dev)
+void omap_fbdev_fini(struct drm_device *dev)
 {
 	struct omap_drm_private *priv = dev->dev_private;
 	struct drm_fb_helper *helper = priv->fbdev;
@@ -296,11 +291,14 @@ void omap_fbdev_free(struct drm_device *dev)
 
 	DBG();
 
+	if (!helper)
+		return;
+
 	drm_fb_helper_unregister_fbi(helper);
 
 	drm_fb_helper_fini(helper);
 
-	fbdev = to_omap_fbdev(priv->fbdev);
+	fbdev = to_omap_fbdev(helper);
 
 	/* unpin the GEM object pinned in omap_fbdev_create() */
 	if (fbdev->bo)
diff --git a/drivers/gpu/drm/omapdrm/omap_fbdev.h b/drivers/gpu/drm/omapdrm/omap_fbdev.h
index 1f5ba0996a1a..7dfd843f73f1 100644
--- a/drivers/gpu/drm/omapdrm/omap_fbdev.h
+++ b/drivers/gpu/drm/omapdrm/omap_fbdev.h
@@ -24,14 +24,13 @@ struct drm_device;
 struct drm_fb_helper;
 
 #ifdef CONFIG_DRM_FBDEV_EMULATION
-struct drm_fb_helper *omap_fbdev_init(struct drm_device *dev);
-void omap_fbdev_free(struct drm_device *dev);
+void omap_fbdev_init(struct drm_device *dev);
+void omap_fbdev_fini(struct drm_device *dev);
 #else
-static inline struct drm_fb_helper *omap_fbdev_init(struct drm_device *dev)
+static inline void omap_fbdev_init(struct drm_device *dev)
 {
-	return NULL;
 }
-static inline void omap_fbdev_free(struct drm_device *dev)
+static inline void omap_fbdev_fini(struct drm_device *dev)
 {
 }
 #endif
-- 
Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki.
Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

Re: [PATCHv2 02/17] drm/omap: cleanup fbdev init/free

[Laurent Pinchart]

Hi Tomi,

Thank you for the patch.

On Wednesday, 28 February 2018 13:25:59 EET Tomi Valkeinen wrote:
> omap_fbdev_init() and omap_fbdev_free() use priv->fbdev directly.
> However, omap_fbdev_init() returns the fbdev, and omap_drv.c also
> assigns the return value to priv->fbdev. This is slightly confusing.
> 
> Clean this up by removing the omap_fbdev_init() return value, as we
> don't care whether fbdev init succeeded or not. Also change omap_drv.c
> to call omap_fbdev_free() always, and omap_fbdev_free() does the check
> if fbdev was initialized.
> 
> While at it, rename omap_fbdev_free() to omap_fbdev_fini() to better
> match the "init" counterpart.
> 
> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>

Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>

> ---
>  drivers/gpu/drm/omapdrm/omap_drv.c   |  9 ++++-----
>  drivers/gpu/drm/omapdrm/omap_fbdev.c | 18 ++++++++----------
>  drivers/gpu/drm/omapdrm/omap_fbdev.h |  9 ++++-----
>  3 files changed, 16 insertions(+), 20 deletions(-)
> 
> diff --git a/drivers/gpu/drm/omapdrm/omap_drv.c
> b/drivers/gpu/drm/omapdrm/omap_drv.c index 65a567dcf3ab..4f48b908bdc6
> 100644
> --- a/drivers/gpu/drm/omapdrm/omap_drv.c
> +++ b/drivers/gpu/drm/omapdrm/omap_drv.c
> @@ -570,7 +570,7 @@ static int omapdrm_init(struct omap_drm_private *priv,
> struct device *dev) for (i = 0; i < priv->num_crtcs; i++)
>  		drm_crtc_vblank_off(priv->crtcs[i]);
> 
> -	priv->fbdev = omap_fbdev_init(ddev);
> +	omap_fbdev_init(ddev);
> 
>  	drm_kms_helper_poll_init(ddev);
>  	omap_modeset_enable_external_hpd();
> @@ -588,8 +588,8 @@ static int omapdrm_init(struct omap_drm_private *priv,
> struct device *dev) err_cleanup_helpers:
>  	omap_modeset_disable_external_hpd();
>  	drm_kms_helper_poll_fini(ddev);
> -	if (priv->fbdev)
> -		omap_fbdev_free(ddev);
> +
> +	omap_fbdev_fini(ddev);
>  err_cleanup_modeset:
>  	drm_mode_config_cleanup(ddev);
>  	omap_drm_irq_uninstall(ddev);
> @@ -615,8 +615,7 @@ static void omapdrm_cleanup(struct omap_drm_private
> *priv) omap_modeset_disable_external_hpd();
>  	drm_kms_helper_poll_fini(ddev);
> 
> -	if (priv->fbdev)
> -		omap_fbdev_free(ddev);
> +	omap_fbdev_fini(ddev);
> 
>  	drm_atomic_helper_shutdown(ddev);
> 
> diff --git a/drivers/gpu/drm/omapdrm/omap_fbdev.c
> b/drivers/gpu/drm/omapdrm/omap_fbdev.c index 632ebcf2165f..be94480326d7
> 100644
> --- a/drivers/gpu/drm/omapdrm/omap_fbdev.c
> +++ b/drivers/gpu/drm/omapdrm/omap_fbdev.c
> @@ -242,7 +242,7 @@ static struct drm_fb_helper *get_fb(struct fb_info *fbi)
> }
> 
>  /* initialize fbdev helper */
> -struct drm_fb_helper *omap_fbdev_init(struct drm_device *dev)
> +void omap_fbdev_init(struct drm_device *dev)
>  {
>  	struct omap_drm_private *priv = dev->dev_private;
>  	struct omap_fbdev *fbdev = NULL;
> @@ -260,10 +260,8 @@ struct drm_fb_helper *omap_fbdev_init(struct drm_device
> *dev) drm_fb_helper_prepare(dev, helper, &omap_fb_helper_funcs);
> 
>  	ret = drm_fb_helper_init(dev, helper, priv->num_connectors);
> -	if (ret) {
> -		dev_err(dev->dev, "could not init fbdev: ret=%d\n", ret);
> +	if (ret)
>  		goto fail;
> -	}
> 
>  	ret = drm_fb_helper_single_add_all_connectors(helper);
>  	if (ret)
> @@ -275,7 +273,7 @@ struct drm_fb_helper *omap_fbdev_init(struct drm_device
> *dev)
> 
>  	priv->fbdev = helper;
> 
> -	return helper;
> +	return;
> 
>  fini:
>  	drm_fb_helper_fini(helper);
> @@ -283,12 +281,9 @@ struct drm_fb_helper *omap_fbdev_init(struct drm_device
> *dev) kfree(fbdev);
> 
>  	dev_warn(dev->dev, "omap_fbdev_init failed\n");
> -	/* well, limp along without an fbdev.. maybe X11 will work? */
> -
> -	return NULL;
>  }
> 
> -void omap_fbdev_free(struct drm_device *dev)
> +void omap_fbdev_fini(struct drm_device *dev)
>  {
>  	struct omap_drm_private *priv = dev->dev_private;
>  	struct drm_fb_helper *helper = priv->fbdev;
> @@ -296,11 +291,14 @@ void omap_fbdev_free(struct drm_device *dev)
> 
>  	DBG();
> 
> +	if (!helper)
> +		return;
> +
>  	drm_fb_helper_unregister_fbi(helper);
> 
>  	drm_fb_helper_fini(helper);
> 
> -	fbdev = to_omap_fbdev(priv->fbdev);
> +	fbdev = to_omap_fbdev(helper);
> 
>  	/* unpin the GEM object pinned in omap_fbdev_create() */
>  	if (fbdev->bo)
> diff --git a/drivers/gpu/drm/omapdrm/omap_fbdev.h
> b/drivers/gpu/drm/omapdrm/omap_fbdev.h index 1f5ba0996a1a..7dfd843f73f1
> 100644
> --- a/drivers/gpu/drm/omapdrm/omap_fbdev.h
> +++ b/drivers/gpu/drm/omapdrm/omap_fbdev.h
> @@ -24,14 +24,13 @@ struct drm_device;
>  struct drm_fb_helper;
> 
>  #ifdef CONFIG_DRM_FBDEV_EMULATION
> -struct drm_fb_helper *omap_fbdev_init(struct drm_device *dev);
> -void omap_fbdev_free(struct drm_device *dev);
> +void omap_fbdev_init(struct drm_device *dev);
> +void omap_fbdev_fini(struct drm_device *dev);
>  #else
> -static inline struct drm_fb_helper *omap_fbdev_init(struct drm_device *dev)
> +static inline void omap_fbdev_init(struct drm_device *dev)
>  {
> -	return NULL;
>  }
> -static inline void omap_fbdev_free(struct drm_device *dev)
> +static inline void omap_fbdev_fini(struct drm_device *dev)
>  {
>  }
>  #endif

-- 
Regards,

Laurent Pinchart

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

Re: [PATCHv2 02/17] drm/omap: cleanup fbdev init/free

[Sebastian Reichel]

[-- Attachment #1.1: Type: text/plain, Size: 5514 bytes --]

Hi,

On Wed, Feb 28, 2018 at 01:25:59PM +0200, Tomi Valkeinen wrote:
> omap_fbdev_init() and omap_fbdev_free() use priv->fbdev directly.
> However, omap_fbdev_init() returns the fbdev, and omap_drv.c also
> assigns the return value to priv->fbdev. This is slightly confusing.
> 
> Clean this up by removing the omap_fbdev_init() return value, as we
> don't care whether fbdev init succeeded or not. Also change omap_drv.c
> to call omap_fbdev_free() always, and omap_fbdev_free() does the check
> if fbdev was initialized.
> 
> While at it, rename omap_fbdev_free() to omap_fbdev_fini() to better
> match the "init" counterpart.
> 
> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
> ---

Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>

-- Sebastian

>  drivers/gpu/drm/omapdrm/omap_drv.c   |  9 ++++-----
>  drivers/gpu/drm/omapdrm/omap_fbdev.c | 18 ++++++++----------
>  drivers/gpu/drm/omapdrm/omap_fbdev.h |  9 ++++-----
>  3 files changed, 16 insertions(+), 20 deletions(-)
> 
> diff --git a/drivers/gpu/drm/omapdrm/omap_drv.c b/drivers/gpu/drm/omapdrm/omap_drv.c
> index 65a567dcf3ab..4f48b908bdc6 100644
> --- a/drivers/gpu/drm/omapdrm/omap_drv.c
> +++ b/drivers/gpu/drm/omapdrm/omap_drv.c
> @@ -570,7 +570,7 @@ static int omapdrm_init(struct omap_drm_private *priv, struct device *dev)
>  	for (i = 0; i < priv->num_crtcs; i++)
>  		drm_crtc_vblank_off(priv->crtcs[i]);
>  
> -	priv->fbdev = omap_fbdev_init(ddev);
> +	omap_fbdev_init(ddev);
>  
>  	drm_kms_helper_poll_init(ddev);
>  	omap_modeset_enable_external_hpd();
> @@ -588,8 +588,8 @@ static int omapdrm_init(struct omap_drm_private *priv, struct device *dev)
>  err_cleanup_helpers:
>  	omap_modeset_disable_external_hpd();
>  	drm_kms_helper_poll_fini(ddev);
> -	if (priv->fbdev)
> -		omap_fbdev_free(ddev);
> +
> +	omap_fbdev_fini(ddev);
>  err_cleanup_modeset:
>  	drm_mode_config_cleanup(ddev);
>  	omap_drm_irq_uninstall(ddev);
> @@ -615,8 +615,7 @@ static void omapdrm_cleanup(struct omap_drm_private *priv)
>  	omap_modeset_disable_external_hpd();
>  	drm_kms_helper_poll_fini(ddev);
>  
> -	if (priv->fbdev)
> -		omap_fbdev_free(ddev);
> +	omap_fbdev_fini(ddev);
>  
>  	drm_atomic_helper_shutdown(ddev);
>  
> diff --git a/drivers/gpu/drm/omapdrm/omap_fbdev.c b/drivers/gpu/drm/omapdrm/omap_fbdev.c
> index 632ebcf2165f..be94480326d7 100644
> --- a/drivers/gpu/drm/omapdrm/omap_fbdev.c
> +++ b/drivers/gpu/drm/omapdrm/omap_fbdev.c
> @@ -242,7 +242,7 @@ static struct drm_fb_helper *get_fb(struct fb_info *fbi)
>  }
>  
>  /* initialize fbdev helper */
> -struct drm_fb_helper *omap_fbdev_init(struct drm_device *dev)
> +void omap_fbdev_init(struct drm_device *dev)
>  {
>  	struct omap_drm_private *priv = dev->dev_private;
>  	struct omap_fbdev *fbdev = NULL;
> @@ -260,10 +260,8 @@ struct drm_fb_helper *omap_fbdev_init(struct drm_device *dev)
>  	drm_fb_helper_prepare(dev, helper, &omap_fb_helper_funcs);
>  
>  	ret = drm_fb_helper_init(dev, helper, priv->num_connectors);
> -	if (ret) {
> -		dev_err(dev->dev, "could not init fbdev: ret=%d\n", ret);
> +	if (ret)
>  		goto fail;
> -	}
>  
>  	ret = drm_fb_helper_single_add_all_connectors(helper);
>  	if (ret)
> @@ -275,7 +273,7 @@ struct drm_fb_helper *omap_fbdev_init(struct drm_device *dev)
>  
>  	priv->fbdev = helper;
>  
> -	return helper;
> +	return;
>  
>  fini:
>  	drm_fb_helper_fini(helper);
> @@ -283,12 +281,9 @@ struct drm_fb_helper *omap_fbdev_init(struct drm_device *dev)
>  	kfree(fbdev);
>  
>  	dev_warn(dev->dev, "omap_fbdev_init failed\n");
> -	/* well, limp along without an fbdev.. maybe X11 will work? */
> -
> -	return NULL;
>  }
>  
> -void omap_fbdev_free(struct drm_device *dev)
> +void omap_fbdev_fini(struct drm_device *dev)
>  {
>  	struct omap_drm_private *priv = dev->dev_private;
>  	struct drm_fb_helper *helper = priv->fbdev;
> @@ -296,11 +291,14 @@ void omap_fbdev_free(struct drm_device *dev)
>  
>  	DBG();
>  
> +	if (!helper)
> +		return;
> +
>  	drm_fb_helper_unregister_fbi(helper);
>  
>  	drm_fb_helper_fini(helper);
>  
> -	fbdev = to_omap_fbdev(priv->fbdev);
> +	fbdev = to_omap_fbdev(helper);
>  
>  	/* unpin the GEM object pinned in omap_fbdev_create() */
>  	if (fbdev->bo)
> diff --git a/drivers/gpu/drm/omapdrm/omap_fbdev.h b/drivers/gpu/drm/omapdrm/omap_fbdev.h
> index 1f5ba0996a1a..7dfd843f73f1 100644
> --- a/drivers/gpu/drm/omapdrm/omap_fbdev.h
> +++ b/drivers/gpu/drm/omapdrm/omap_fbdev.h
> @@ -24,14 +24,13 @@ struct drm_device;
>  struct drm_fb_helper;
>  
>  #ifdef CONFIG_DRM_FBDEV_EMULATION
> -struct drm_fb_helper *omap_fbdev_init(struct drm_device *dev);
> -void omap_fbdev_free(struct drm_device *dev);
> +void omap_fbdev_init(struct drm_device *dev);
> +void omap_fbdev_fini(struct drm_device *dev);
>  #else
> -static inline struct drm_fb_helper *omap_fbdev_init(struct drm_device *dev)
> +static inline void omap_fbdev_init(struct drm_device *dev)
>  {
> -	return NULL;
>  }
> -static inline void omap_fbdev_free(struct drm_device *dev)
> +static inline void omap_fbdev_fini(struct drm_device *dev)
>  {
>  }
>  #endif
> -- 
> Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki.
> Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki
> 
> _______________________________________________
> dri-devel mailing list
> dri-devel@lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/dri-devel

[-- Attachment #1.2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]

[-- Attachment #2: Type: text/plain, Size: 160 bytes --]

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

[PATCHv2 03/17] drm/omap: Init fbdev emulation only when we have displays

[Tomi Valkeinen]

From: Peter Ujfalusi <peter.ujfalusi@ti.com>

Do not try to init the fbdev if either num_crtcs or num_connectors is 0.
In this case we do not have display so the fbdev init would fail anyways.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
---
 drivers/gpu/drm/omapdrm/omap_fbdev.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/gpu/drm/omapdrm/omap_fbdev.c b/drivers/gpu/drm/omapdrm/omap_fbdev.c
index be94480326d7..0f66c74a54b0 100644
--- a/drivers/gpu/drm/omapdrm/omap_fbdev.c
+++ b/drivers/gpu/drm/omapdrm/omap_fbdev.c
@@ -249,6 +249,9 @@ void omap_fbdev_init(struct drm_device *dev)
 	struct drm_fb_helper *helper;
 	int ret = 0;
 
+	if (!priv->num_crtcs || !priv->num_connectors)
+		return;
+
 	fbdev = kzalloc(sizeof(*fbdev), GFP_KERNEL);
 	if (!fbdev)
 		goto fail;
-- 
Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki.
Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

Re: [PATCHv2 03/17] drm/omap: Init fbdev emulation only when we have displays

[Sebastian Reichel]

[-- Attachment #1.1: Type: text/plain, Size: 1472 bytes --]

Hi,

On Wed, Feb 28, 2018 at 01:26:00PM +0200, Tomi Valkeinen wrote:
> From: Peter Ujfalusi <peter.ujfalusi@ti.com>
> 
> Do not try to init the fbdev if either num_crtcs or num_connectors is 0.
> In this case we do not have display so the fbdev init would fail anyways.
> 
> Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
> ---

Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>

-- Sebastian

>  drivers/gpu/drm/omapdrm/omap_fbdev.c | 3 +++
>  1 file changed, 3 insertions(+)
> 
> diff --git a/drivers/gpu/drm/omapdrm/omap_fbdev.c b/drivers/gpu/drm/omapdrm/omap_fbdev.c
> index be94480326d7..0f66c74a54b0 100644
> --- a/drivers/gpu/drm/omapdrm/omap_fbdev.c
> +++ b/drivers/gpu/drm/omapdrm/omap_fbdev.c
> @@ -249,6 +249,9 @@ void omap_fbdev_init(struct drm_device *dev)
>  	struct drm_fb_helper *helper;
>  	int ret = 0;
>  
> +	if (!priv->num_crtcs || !priv->num_connectors)
> +		return;
> +
>  	fbdev = kzalloc(sizeof(*fbdev), GFP_KERNEL);
>  	if (!fbdev)
>  		goto fail;
> -- 
> Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki.
> Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki
> 
> _______________________________________________
> dri-devel mailing list
> dri-devel@lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/dri-devel

[-- Attachment #1.2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]

[-- Attachment #2: Type: text/plain, Size: 160 bytes --]

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

[PATCHv2 04/17] drm/omap: add HPD support to connector-dvi

[Tomi Valkeinen]

Add HPD support to the DVI connector driver. The code is almost
identical to the HPD code in the HDMI connector driver.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
 drivers/gpu/drm/omapdrm/displays/connector-dvi.c | 118 +++++++++++++++++++++++
 1 file changed, 118 insertions(+)

diff --git a/drivers/gpu/drm/omapdrm/displays/connector-dvi.c b/drivers/gpu/drm/omapdrm/displays/connector-dvi.c
index 391d80364346..6d8cbd9e2110 100644
--- a/drivers/gpu/drm/omapdrm/displays/connector-dvi.c
+++ b/drivers/gpu/drm/omapdrm/displays/connector-dvi.c
@@ -9,6 +9,7 @@
  * the Free Software Foundation.
  */
 
+#include <linux/gpio/consumer.h>
 #include <linux/i2c.h>
 #include <linux/module.h>
 #include <linux/platform_device.h>
@@ -44,6 +45,14 @@ struct panel_drv_data {
 	struct videomode vm;
 
 	struct i2c_adapter *i2c_adapter;
+
+	struct gpio_desc *hpd_gpio;
+
+	void (*hpd_cb)(void *cb_data, enum drm_connector_status status);
+	void *hpd_cb_data;
+	bool hpd_enabled;
+	/* mutex for hpd fields above */
+	struct mutex hpd_lock;
 };
 
 #define to_panel_data(x) container_of(x, struct panel_drv_data, dssdev)
@@ -189,6 +198,9 @@ static int dvic_read_edid(struct omap_dss_device *dssdev,
 	struct panel_drv_data *ddata = to_panel_data(dssdev);
 	int r, l, bytes_read;
 
+	if (ddata->hpd_gpio && !gpiod_get_value_cansleep(ddata->hpd_gpio))
+		return -ENODEV;
+
 	if (!ddata->i2c_adapter)
 		return -ENODEV;
 
@@ -220,6 +232,9 @@ static bool dvic_detect(struct omap_dss_device *dssdev)
 	unsigned char out;
 	int r;
 
+	if (ddata->hpd_gpio)
+		return gpiod_get_value_cansleep(ddata->hpd_gpio);
+
 	if (!ddata->i2c_adapter)
 		return true;
 
@@ -228,6 +243,60 @@ static bool dvic_detect(struct omap_dss_device *dssdev)
 	return r == 0;
 }
 
+static int dvic_register_hpd_cb(struct omap_dss_device *dssdev,
+				 void (*cb)(void *cb_data,
+					    enum drm_connector_status status),
+				 void *cb_data)
+{
+	struct panel_drv_data *ddata = to_panel_data(dssdev);
+
+	if (!ddata->hpd_gpio)
+		return -ENOTSUPP;
+
+	mutex_lock(&ddata->hpd_lock);
+	ddata->hpd_cb = cb;
+	ddata->hpd_cb_data = cb_data;
+	mutex_unlock(&ddata->hpd_lock);
+	return 0;
+}
+
+static void dvic_unregister_hpd_cb(struct omap_dss_device *dssdev)
+{
+	struct panel_drv_data *ddata = to_panel_data(dssdev);
+
+	if (!ddata->hpd_gpio)
+		return;
+
+	mutex_lock(&ddata->hpd_lock);
+	ddata->hpd_cb = NULL;
+	ddata->hpd_cb_data = NULL;
+	mutex_unlock(&ddata->hpd_lock);
+}
+
+static void dvic_enable_hpd(struct omap_dss_device *dssdev)
+{
+	struct panel_drv_data *ddata = to_panel_data(dssdev);
+
+	if (!ddata->hpd_gpio)
+		return;
+
+	mutex_lock(&ddata->hpd_lock);
+	ddata->hpd_enabled = true;
+	mutex_unlock(&ddata->hpd_lock);
+}
+
+static void dvic_disable_hpd(struct omap_dss_device *dssdev)
+{
+	struct panel_drv_data *ddata = to_panel_data(dssdev);
+
+	if (!ddata->hpd_gpio)
+		return;
+
+	mutex_lock(&ddata->hpd_lock);
+	ddata->hpd_enabled = false;
+	mutex_unlock(&ddata->hpd_lock);
+}
+
 static struct omap_dss_driver dvic_driver = {
 	.connect	= dvic_connect,
 	.disconnect	= dvic_disconnect,
@@ -241,14 +310,60 @@ static struct omap_dss_driver dvic_driver = {
 
 	.read_edid	= dvic_read_edid,
 	.detect		= dvic_detect,
+
+	.register_hpd_cb	= dvic_register_hpd_cb,
+	.unregister_hpd_cb	= dvic_unregister_hpd_cb,
+	.enable_hpd		= dvic_enable_hpd,
+	.disable_hpd		= dvic_disable_hpd,
 };
 
+static irqreturn_t dvic_hpd_isr(int irq, void *data)
+{
+	struct panel_drv_data *ddata = data;
+
+	mutex_lock(&ddata->hpd_lock);
+	if (ddata->hpd_enabled && ddata->hpd_cb) {
+		enum drm_connector_status status;
+
+		if (dvic_detect(&ddata->dssdev))
+			status = connector_status_connected;
+		else
+			status = connector_status_disconnected;
+
+		ddata->hpd_cb(ddata->hpd_cb_data, status);
+	}
+	mutex_unlock(&ddata->hpd_lock);
+
+	return IRQ_HANDLED;
+}
+
 static int dvic_probe_of(struct platform_device *pdev)
 {
 	struct panel_drv_data *ddata = platform_get_drvdata(pdev);
 	struct device_node *node = pdev->dev.of_node;
 	struct device_node *adapter_node;
 	struct i2c_adapter *adapter;
+	struct gpio_desc *gpio;
+	int r;
+
+	gpio = devm_gpiod_get_optional(&pdev->dev, "hpd", GPIOD_IN);
+	if (IS_ERR(gpio)) {
+		dev_err(&pdev->dev, "failed to parse HPD gpio\n");
+		return PTR_ERR(gpio);
+	}
+
+	ddata->hpd_gpio = gpio;
+
+	mutex_init(&ddata->hpd_lock);
+
+	if (ddata->hpd_gpio) {
+		r = devm_request_threaded_irq(&pdev->dev,
+			gpiod_to_irq(ddata->hpd_gpio), NULL, dvic_hpd_isr,
+			IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
+			"DVI HPD", ddata);
+		if (r)
+			return r;
+	}
 
 	adapter_node = of_parse_phandle(node, "ddc-i2c-bus", 0);
 	if (adapter_node) {
@@ -300,6 +415,7 @@ static int dvic_probe(struct platform_device *pdev)
 
 err_reg:
 	i2c_put_adapter(ddata->i2c_adapter);
+	mutex_destroy(&ddata->hpd_lock);
 
 	return r;
 }
@@ -316,6 +432,8 @@ static int __exit dvic_remove(struct platform_device *pdev)
 
 	i2c_put_adapter(ddata->i2c_adapter);
 
+	mutex_destroy(&ddata->hpd_lock);
+
 	return 0;
 }
 
-- 
Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki.
Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

Re: [PATCHv2 04/17] drm/omap: add HPD support to connector-dvi

[Laurent Pinchart]

Hi Tomi,

Thank you for the patch.

On Wednesday, 28 February 2018 13:26:01 EET Tomi Valkeinen wrote:
> Add HPD support to the DVI connector driver. The code is almost
> identical to the HPD code in the HDMI connector driver.
> 
> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>

Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>

> ---
>  drivers/gpu/drm/omapdrm/displays/connector-dvi.c | 118 ++++++++++++++++++++
>  1 file changed, 118 insertions(+)
> 
> diff --git a/drivers/gpu/drm/omapdrm/displays/connector-dvi.c
> b/drivers/gpu/drm/omapdrm/displays/connector-dvi.c index
> 391d80364346..6d8cbd9e2110 100644
> --- a/drivers/gpu/drm/omapdrm/displays/connector-dvi.c
> +++ b/drivers/gpu/drm/omapdrm/displays/connector-dvi.c
> @@ -9,6 +9,7 @@
>   * the Free Software Foundation.
>   */
> 
> +#include <linux/gpio/consumer.h>
>  #include <linux/i2c.h>
>  #include <linux/module.h>
>  #include <linux/platform_device.h>
> @@ -44,6 +45,14 @@ struct panel_drv_data {
>  	struct videomode vm;
> 
>  	struct i2c_adapter *i2c_adapter;
> +
> +	struct gpio_desc *hpd_gpio;
> +
> +	void (*hpd_cb)(void *cb_data, enum drm_connector_status status);
> +	void *hpd_cb_data;
> +	bool hpd_enabled;
> +	/* mutex for hpd fields above */
> +	struct mutex hpd_lock;
>  };
> 
>  #define to_panel_data(x) container_of(x, struct panel_drv_data, dssdev)
> @@ -189,6 +198,9 @@ static int dvic_read_edid(struct omap_dss_device
> *dssdev, struct panel_drv_data *ddata = to_panel_data(dssdev);
>  	int r, l, bytes_read;
> 
> +	if (ddata->hpd_gpio && !gpiod_get_value_cansleep(ddata->hpd_gpio))
> +		return -ENODEV;
> +
>  	if (!ddata->i2c_adapter)
>  		return -ENODEV;
> 
> @@ -220,6 +232,9 @@ static bool dvic_detect(struct omap_dss_device *dssdev)
>  	unsigned char out;
>  	int r;
> 
> +	if (ddata->hpd_gpio)
> +		return gpiod_get_value_cansleep(ddata->hpd_gpio);
> +
>  	if (!ddata->i2c_adapter)
>  		return true;
> 
> @@ -228,6 +243,60 @@ static bool dvic_detect(struct omap_dss_device *dssdev)
> return r == 0;
>  }
> 
> +static int dvic_register_hpd_cb(struct omap_dss_device *dssdev,
> +				 void (*cb)(void *cb_data,
> +					    enum drm_connector_status status),
> +				 void *cb_data)
> +{
> +	struct panel_drv_data *ddata = to_panel_data(dssdev);
> +
> +	if (!ddata->hpd_gpio)
> +		return -ENOTSUPP;
> +
> +	mutex_lock(&ddata->hpd_lock);
> +	ddata->hpd_cb = cb;
> +	ddata->hpd_cb_data = cb_data;
> +	mutex_unlock(&ddata->hpd_lock);
> +	return 0;
> +}
> +
> +static void dvic_unregister_hpd_cb(struct omap_dss_device *dssdev)
> +{
> +	struct panel_drv_data *ddata = to_panel_data(dssdev);
> +
> +	if (!ddata->hpd_gpio)
> +		return;
> +
> +	mutex_lock(&ddata->hpd_lock);
> +	ddata->hpd_cb = NULL;
> +	ddata->hpd_cb_data = NULL;
> +	mutex_unlock(&ddata->hpd_lock);
> +}
> +
> +static void dvic_enable_hpd(struct omap_dss_device *dssdev)
> +{
> +	struct panel_drv_data *ddata = to_panel_data(dssdev);
> +
> +	if (!ddata->hpd_gpio)
> +		return;
> +
> +	mutex_lock(&ddata->hpd_lock);
> +	ddata->hpd_enabled = true;
> +	mutex_unlock(&ddata->hpd_lock);
> +}
> +
> +static void dvic_disable_hpd(struct omap_dss_device *dssdev)
> +{
> +	struct panel_drv_data *ddata = to_panel_data(dssdev);
> +
> +	if (!ddata->hpd_gpio)
> +		return;
> +
> +	mutex_lock(&ddata->hpd_lock);
> +	ddata->hpd_enabled = false;
> +	mutex_unlock(&ddata->hpd_lock);
> +}
> +
>  static struct omap_dss_driver dvic_driver = {
>  	.connect	= dvic_connect,
>  	.disconnect	= dvic_disconnect,
> @@ -241,14 +310,60 @@ static struct omap_dss_driver dvic_driver = {
> 
>  	.read_edid	= dvic_read_edid,
>  	.detect		= dvic_detect,
> +
> +	.register_hpd_cb	= dvic_register_hpd_cb,
> +	.unregister_hpd_cb	= dvic_unregister_hpd_cb,
> +	.enable_hpd		= dvic_enable_hpd,
> +	.disable_hpd		= dvic_disable_hpd,
>  };
> 
> +static irqreturn_t dvic_hpd_isr(int irq, void *data)
> +{
> +	struct panel_drv_data *ddata = data;
> +
> +	mutex_lock(&ddata->hpd_lock);
> +	if (ddata->hpd_enabled && ddata->hpd_cb) {
> +		enum drm_connector_status status;
> +
> +		if (dvic_detect(&ddata->dssdev))
> +			status = connector_status_connected;
> +		else
> +			status = connector_status_disconnected;
> +
> +		ddata->hpd_cb(ddata->hpd_cb_data, status);
> +	}
> +	mutex_unlock(&ddata->hpd_lock);
> +
> +	return IRQ_HANDLED;
> +}
> +
>  static int dvic_probe_of(struct platform_device *pdev)
>  {
>  	struct panel_drv_data *ddata = platform_get_drvdata(pdev);
>  	struct device_node *node = pdev->dev.of_node;
>  	struct device_node *adapter_node;
>  	struct i2c_adapter *adapter;
> +	struct gpio_desc *gpio;
> +	int r;
> +
> +	gpio = devm_gpiod_get_optional(&pdev->dev, "hpd", GPIOD_IN);
> +	if (IS_ERR(gpio)) {
> +		dev_err(&pdev->dev, "failed to parse HPD gpio\n");
> +		return PTR_ERR(gpio);
> +	}
> +
> +	ddata->hpd_gpio = gpio;
> +
> +	mutex_init(&ddata->hpd_lock);
> +
> +	if (ddata->hpd_gpio) {
> +		r = devm_request_threaded_irq(&pdev->dev,
> +			gpiod_to_irq(ddata->hpd_gpio), NULL, dvic_hpd_isr,
> +			IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
> +			"DVI HPD", ddata);
> +		if (r)
> +			return r;
> +	}
> 
>  	adapter_node = of_parse_phandle(node, "ddc-i2c-bus", 0);
>  	if (adapter_node) {
> @@ -300,6 +415,7 @@ static int dvic_probe(struct platform_device *pdev)
> 
>  err_reg:
>  	i2c_put_adapter(ddata->i2c_adapter);
> +	mutex_destroy(&ddata->hpd_lock);
> 
>  	return r;
>  }
> @@ -316,6 +432,8 @@ static int __exit dvic_remove(struct platform_device
> *pdev)
> 
>  	i2c_put_adapter(ddata->i2c_adapter);
> 
> +	mutex_destroy(&ddata->hpd_lock);
> +
>  	return 0;
>  }

-- 
Regards,

Laurent Pinchart

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

Re: [PATCHv2 04/17] drm/omap: add HPD support to connector-dvi

[Sebastian Reichel]

[-- Attachment #1.1: Type: text/plain, Size: 6062 bytes --]

Hi,

On Wed, Feb 28, 2018 at 01:26:01PM +0200, Tomi Valkeinen wrote:
> Add HPD support to the DVI connector driver. The code is almost
> identical to the HPD code in the HDMI connector driver.
> 
> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
> ---

Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>

-- Sebastian

>  drivers/gpu/drm/omapdrm/displays/connector-dvi.c | 118 +++++++++++++++++++++++
>  1 file changed, 118 insertions(+)
> 
> diff --git a/drivers/gpu/drm/omapdrm/displays/connector-dvi.c b/drivers/gpu/drm/omapdrm/displays/connector-dvi.c
> index 391d80364346..6d8cbd9e2110 100644
> --- a/drivers/gpu/drm/omapdrm/displays/connector-dvi.c
> +++ b/drivers/gpu/drm/omapdrm/displays/connector-dvi.c
> @@ -9,6 +9,7 @@
>   * the Free Software Foundation.
>   */
>  
> +#include <linux/gpio/consumer.h>
>  #include <linux/i2c.h>
>  #include <linux/module.h>
>  #include <linux/platform_device.h>
> @@ -44,6 +45,14 @@ struct panel_drv_data {
>  	struct videomode vm;
>  
>  	struct i2c_adapter *i2c_adapter;
> +
> +	struct gpio_desc *hpd_gpio;
> +
> +	void (*hpd_cb)(void *cb_data, enum drm_connector_status status);
> +	void *hpd_cb_data;
> +	bool hpd_enabled;
> +	/* mutex for hpd fields above */
> +	struct mutex hpd_lock;
>  };
>  
>  #define to_panel_data(x) container_of(x, struct panel_drv_data, dssdev)
> @@ -189,6 +198,9 @@ static int dvic_read_edid(struct omap_dss_device *dssdev,
>  	struct panel_drv_data *ddata = to_panel_data(dssdev);
>  	int r, l, bytes_read;
>  
> +	if (ddata->hpd_gpio && !gpiod_get_value_cansleep(ddata->hpd_gpio))
> +		return -ENODEV;
> +
>  	if (!ddata->i2c_adapter)
>  		return -ENODEV;
>  
> @@ -220,6 +232,9 @@ static bool dvic_detect(struct omap_dss_device *dssdev)
>  	unsigned char out;
>  	int r;
>  
> +	if (ddata->hpd_gpio)
> +		return gpiod_get_value_cansleep(ddata->hpd_gpio);
> +
>  	if (!ddata->i2c_adapter)
>  		return true;
>  
> @@ -228,6 +243,60 @@ static bool dvic_detect(struct omap_dss_device *dssdev)
>  	return r == 0;
>  }
>  
> +static int dvic_register_hpd_cb(struct omap_dss_device *dssdev,
> +				 void (*cb)(void *cb_data,
> +					    enum drm_connector_status status),
> +				 void *cb_data)
> +{
> +	struct panel_drv_data *ddata = to_panel_data(dssdev);
> +
> +	if (!ddata->hpd_gpio)
> +		return -ENOTSUPP;
> +
> +	mutex_lock(&ddata->hpd_lock);
> +	ddata->hpd_cb = cb;
> +	ddata->hpd_cb_data = cb_data;
> +	mutex_unlock(&ddata->hpd_lock);
> +	return 0;
> +}
> +
> +static void dvic_unregister_hpd_cb(struct omap_dss_device *dssdev)
> +{
> +	struct panel_drv_data *ddata = to_panel_data(dssdev);
> +
> +	if (!ddata->hpd_gpio)
> +		return;
> +
> +	mutex_lock(&ddata->hpd_lock);
> +	ddata->hpd_cb = NULL;
> +	ddata->hpd_cb_data = NULL;
> +	mutex_unlock(&ddata->hpd_lock);
> +}
> +
> +static void dvic_enable_hpd(struct omap_dss_device *dssdev)
> +{
> +	struct panel_drv_data *ddata = to_panel_data(dssdev);
> +
> +	if (!ddata->hpd_gpio)
> +		return;
> +
> +	mutex_lock(&ddata->hpd_lock);
> +	ddata->hpd_enabled = true;
> +	mutex_unlock(&ddata->hpd_lock);
> +}
> +
> +static void dvic_disable_hpd(struct omap_dss_device *dssdev)
> +{
> +	struct panel_drv_data *ddata = to_panel_data(dssdev);
> +
> +	if (!ddata->hpd_gpio)
> +		return;
> +
> +	mutex_lock(&ddata->hpd_lock);
> +	ddata->hpd_enabled = false;
> +	mutex_unlock(&ddata->hpd_lock);
> +}
> +
>  static struct omap_dss_driver dvic_driver = {
>  	.connect	= dvic_connect,
>  	.disconnect	= dvic_disconnect,
> @@ -241,14 +310,60 @@ static struct omap_dss_driver dvic_driver = {
>  
>  	.read_edid	= dvic_read_edid,
>  	.detect		= dvic_detect,
> +
> +	.register_hpd_cb	= dvic_register_hpd_cb,
> +	.unregister_hpd_cb	= dvic_unregister_hpd_cb,
> +	.enable_hpd		= dvic_enable_hpd,
> +	.disable_hpd		= dvic_disable_hpd,
>  };
>  
> +static irqreturn_t dvic_hpd_isr(int irq, void *data)
> +{
> +	struct panel_drv_data *ddata = data;
> +
> +	mutex_lock(&ddata->hpd_lock);
> +	if (ddata->hpd_enabled && ddata->hpd_cb) {
> +		enum drm_connector_status status;
> +
> +		if (dvic_detect(&ddata->dssdev))
> +			status = connector_status_connected;
> +		else
> +			status = connector_status_disconnected;
> +
> +		ddata->hpd_cb(ddata->hpd_cb_data, status);
> +	}
> +	mutex_unlock(&ddata->hpd_lock);
> +
> +	return IRQ_HANDLED;
> +}
> +
>  static int dvic_probe_of(struct platform_device *pdev)
>  {
>  	struct panel_drv_data *ddata = platform_get_drvdata(pdev);
>  	struct device_node *node = pdev->dev.of_node;
>  	struct device_node *adapter_node;
>  	struct i2c_adapter *adapter;
> +	struct gpio_desc *gpio;
> +	int r;
> +
> +	gpio = devm_gpiod_get_optional(&pdev->dev, "hpd", GPIOD_IN);
> +	if (IS_ERR(gpio)) {
> +		dev_err(&pdev->dev, "failed to parse HPD gpio\n");
> +		return PTR_ERR(gpio);
> +	}
> +
> +	ddata->hpd_gpio = gpio;
> +
> +	mutex_init(&ddata->hpd_lock);
> +
> +	if (ddata->hpd_gpio) {
> +		r = devm_request_threaded_irq(&pdev->dev,
> +			gpiod_to_irq(ddata->hpd_gpio), NULL, dvic_hpd_isr,
> +			IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
> +			"DVI HPD", ddata);
> +		if (r)
> +			return r;
> +	}
>  
>  	adapter_node = of_parse_phandle(node, "ddc-i2c-bus", 0);
>  	if (adapter_node) {
> @@ -300,6 +415,7 @@ static int dvic_probe(struct platform_device *pdev)
>  
>  err_reg:
>  	i2c_put_adapter(ddata->i2c_adapter);
> +	mutex_destroy(&ddata->hpd_lock);
>  
>  	return r;
>  }
> @@ -316,6 +432,8 @@ static int __exit dvic_remove(struct platform_device *pdev)
>  
>  	i2c_put_adapter(ddata->i2c_adapter);
>  
> +	mutex_destroy(&ddata->hpd_lock);
> +
>  	return 0;
>  }
>  
> -- 
> Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki.
> Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki
> 
> _______________________________________________
> dri-devel mailing list
> dri-devel@lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/dri-devel

[-- Attachment #1.2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]

[-- Attachment #2: Type: text/plain, Size: 160 bytes --]

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

[PATCHv2 05/17] dt-bindings: display: add HPD gpio to DVI connector

[Tomi Valkeinen]

Add hpd-gpios property to dvi-connector.txt.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: devicetree@vger.kernel.org
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
---
 Documentation/devicetree/bindings/display/connector/dvi-connector.txt | 1 +
 1 file changed, 1 insertion(+)

diff --git a/Documentation/devicetree/bindings/display/connector/dvi-connector.txt b/Documentation/devicetree/bindings/display/connector/dvi-connector.txt
index fc53f7c60bc6..207e42e9eba0 100644
--- a/Documentation/devicetree/bindings/display/connector/dvi-connector.txt
+++ b/Documentation/devicetree/bindings/display/connector/dvi-connector.txt
@@ -10,6 +10,7 @@ Optional properties:
 - analog: the connector has DVI analog pins
 - digital: the connector has DVI digital pins
 - dual-link: the connector has pins for DVI dual-link
+- hpd-gpios: HPD GPIO number
 
 Required nodes:
 - Video port for DVI input
-- 
Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki.
Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

Re: [PATCHv2 05/17] dt-bindings: display: add HPD gpio to DVI connector

[Sebastian Reichel]

[-- Attachment #1.1: Type: text/plain, Size: 1506 bytes --]

Hi,

On Wed, Feb 28, 2018 at 01:26:02PM +0200, Tomi Valkeinen wrote:
> Add hpd-gpios property to dvi-connector.txt.
> 
> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
> Cc: devicetree@vger.kernel.org
> Reviewed-by: Rob Herring <robh@kernel.org>
> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>

Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>

-- Sebastian

> ---
>  Documentation/devicetree/bindings/display/connector/dvi-connector.txt | 1 +
>  1 file changed, 1 insertion(+)
> 
> diff --git a/Documentation/devicetree/bindings/display/connector/dvi-connector.txt b/Documentation/devicetree/bindings/display/connector/dvi-connector.txt
> index fc53f7c60bc6..207e42e9eba0 100644
> --- a/Documentation/devicetree/bindings/display/connector/dvi-connector.txt
> +++ b/Documentation/devicetree/bindings/display/connector/dvi-connector.txt
> @@ -10,6 +10,7 @@ Optional properties:
>  - analog: the connector has DVI analog pins
>  - digital: the connector has DVI digital pins
>  - dual-link: the connector has pins for DVI dual-link
> +- hpd-gpios: HPD GPIO number
>  
>  Required nodes:
>  - Video port for DVI input
> -- 
> Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki.
> Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki
> 
> _______________________________________________
> dri-devel mailing list
> dri-devel@lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/dri-devel

[-- Attachment #1.2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]

[-- Attachment #2: Type: text/plain, Size: 160 bytes --]

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

[PATCHv2 06/17] drm/omap: remove leftover enums

[Tomi Valkeinen]

A few enums are not used anywhere, so remove them.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
---
 drivers/gpu/drm/omapdrm/dss/omapdss.h | 15 ---------------
 1 file changed, 15 deletions(-)

diff --git a/drivers/gpu/drm/omapdrm/dss/omapdss.h b/drivers/gpu/drm/omapdrm/dss/omapdss.h
index a4f71e082c1c..162f36fa3431 100644
--- a/drivers/gpu/drm/omapdrm/dss/omapdss.h
+++ b/drivers/gpu/drm/omapdrm/dss/omapdss.h
@@ -163,21 +163,6 @@ enum omap_overlay_caps {
 	OMAP_DSS_OVL_CAP_REPLICATION = 1 << 5,
 };
 
-enum omap_dss_clk_source {
-	OMAP_DSS_CLK_SRC_FCK = 0,		/* OMAP2/3: DSS1_ALWON_FCLK
-						 * OMAP4: DSS_FCLK */
-	OMAP_DSS_CLK_SRC_DSI_PLL_HSDIV_DISPC,	/* OMAP3: DSI1_PLL_FCLK
-						 * OMAP4: PLL1_CLK1 */
-	OMAP_DSS_CLK_SRC_DSI_PLL_HSDIV_DSI,	/* OMAP3: DSI2_PLL_FCLK
-						 * OMAP4: PLL1_CLK2 */
-	OMAP_DSS_CLK_SRC_DSI2_PLL_HSDIV_DISPC,	/* OMAP4: PLL2_CLK1 */
-	OMAP_DSS_CLK_SRC_DSI2_PLL_HSDIV_DSI,	/* OMAP4: PLL2_CLK2 */
-};
-
-enum omap_hdmi_flags {
-	OMAP_HDMI_SDA_SCL_EXTERNAL_PULLUP = 1 << 0,
-};
-
 enum omap_dss_output_id {
 	OMAP_DSS_OUTPUT_DPI	= 1 << 0,
 	OMAP_DSS_OUTPUT_DBI	= 1 << 1,
-- 
Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki.
Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

Re: [PATCHv2 06/17] drm/omap: remove leftover enums

[Sebastian Reichel]

[-- Attachment #1.1: Type: text/plain, Size: 1759 bytes --]

Hi,

On Wed, Feb 28, 2018 at 01:26:03PM +0200, Tomi Valkeinen wrote:
> A few enums are not used anywhere, so remove them.
> 
> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
> ---

Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>

-- Sebastian

>  drivers/gpu/drm/omapdrm/dss/omapdss.h | 15 ---------------
>  1 file changed, 15 deletions(-)
> 
> diff --git a/drivers/gpu/drm/omapdrm/dss/omapdss.h b/drivers/gpu/drm/omapdrm/dss/omapdss.h
> index a4f71e082c1c..162f36fa3431 100644
> --- a/drivers/gpu/drm/omapdrm/dss/omapdss.h
> +++ b/drivers/gpu/drm/omapdrm/dss/omapdss.h
> @@ -163,21 +163,6 @@ enum omap_overlay_caps {
>  	OMAP_DSS_OVL_CAP_REPLICATION = 1 << 5,
>  };
>  
> -enum omap_dss_clk_source {
> -	OMAP_DSS_CLK_SRC_FCK = 0,		/* OMAP2/3: DSS1_ALWON_FCLK
> -						 * OMAP4: DSS_FCLK */
> -	OMAP_DSS_CLK_SRC_DSI_PLL_HSDIV_DISPC,	/* OMAP3: DSI1_PLL_FCLK
> -						 * OMAP4: PLL1_CLK1 */
> -	OMAP_DSS_CLK_SRC_DSI_PLL_HSDIV_DSI,	/* OMAP3: DSI2_PLL_FCLK
> -						 * OMAP4: PLL1_CLK2 */
> -	OMAP_DSS_CLK_SRC_DSI2_PLL_HSDIV_DISPC,	/* OMAP4: PLL2_CLK1 */
> -	OMAP_DSS_CLK_SRC_DSI2_PLL_HSDIV_DSI,	/* OMAP4: PLL2_CLK2 */
> -};
> -
> -enum omap_hdmi_flags {
> -	OMAP_HDMI_SDA_SCL_EXTERNAL_PULLUP = 1 << 0,
> -};
> -
>  enum omap_dss_output_id {
>  	OMAP_DSS_OUTPUT_DPI	= 1 << 0,
>  	OMAP_DSS_OUTPUT_DBI	= 1 << 1,
> -- 
> Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki.
> Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki
> 
> _______________________________________________
> dri-devel mailing list
> dri-devel@lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/dri-devel

[-- Attachment #1.2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]

[-- Attachment #2: Type: text/plain, Size: 160 bytes --]

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

[PATCHv2 07/17] drm/omap: dispc: disp_wb_setup to check return code

[Tomi Valkeinen]

From: Benoit Parrot <bparrot@ti.com>

When dispc_wb_setup() calls dispc_ovl_setup_common() it does not
check for failure but instead keeps on partially setting up WB.
This causes the WB H/W to be partially initialized and yield
unexpected behavior.

Make sure return code is successful before proceeding.

Signed-off-by: Benoit Parrot <bparrot@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
---
 drivers/gpu/drm/omapdrm/dss/dispc.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/omapdrm/dss/dispc.c b/drivers/gpu/drm/omapdrm/dss/dispc.c
index d2d95c76a313..f0f729fc4ca2 100644
--- a/drivers/gpu/drm/omapdrm/dss/dispc.c
+++ b/drivers/gpu/drm/omapdrm/dss/dispc.c
@@ -2783,6 +2783,8 @@ int dispc_wb_setup(struct dispc_device *dispc,
 		wi->height, wi->fourcc, wi->rotation, zorder,
 		wi->pre_mult_alpha, global_alpha, wi->rotation_type,
 		replication, vm, mem_to_mem);
+	if (r)
+		return r;
 
 	switch (wi->fourcc) {
 	case DRM_FORMAT_RGB565:
@@ -2823,7 +2825,7 @@ int dispc_wb_setup(struct dispc_device *dispc,
 		REG_FLD_MOD(dispc, DISPC_OVL_ATTRIBUTES2(plane), wbdelay, 7, 0);
 	}
 
-	return r;
+	return 0;
 }
 
 static int dispc_ovl_enable(struct dispc_device *dispc,
-- 
Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki.
Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

Re: [PATCHv2 07/17] drm/omap: dispc: disp_wb_setup to check return code

[Sebastian Reichel]

[-- Attachment #1.1: Type: text/plain, Size: 1882 bytes --]

Hi,

On Wed, Feb 28, 2018 at 01:26:04PM +0200, Tomi Valkeinen wrote:
> From: Benoit Parrot <bparrot@ti.com>
> 
> When dispc_wb_setup() calls dispc_ovl_setup_common() it does not
> check for failure but instead keeps on partially setting up WB.
> This causes the WB H/W to be partially initialized and yield
> unexpected behavior.
> 
> Make sure return code is successful before proceeding.
> 
> Signed-off-by: Benoit Parrot <bparrot@ti.com>
> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
> ---

Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>

-- Sebastian

>  drivers/gpu/drm/omapdrm/dss/dispc.c | 4 +++-
>  1 file changed, 3 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/gpu/drm/omapdrm/dss/dispc.c b/drivers/gpu/drm/omapdrm/dss/dispc.c
> index d2d95c76a313..f0f729fc4ca2 100644
> --- a/drivers/gpu/drm/omapdrm/dss/dispc.c
> +++ b/drivers/gpu/drm/omapdrm/dss/dispc.c
> @@ -2783,6 +2783,8 @@ int dispc_wb_setup(struct dispc_device *dispc,
>  		wi->height, wi->fourcc, wi->rotation, zorder,
>  		wi->pre_mult_alpha, global_alpha, wi->rotation_type,
>  		replication, vm, mem_to_mem);
> +	if (r)
> +		return r;
>  
>  	switch (wi->fourcc) {
>  	case DRM_FORMAT_RGB565:
> @@ -2823,7 +2825,7 @@ int dispc_wb_setup(struct dispc_device *dispc,
>  		REG_FLD_MOD(dispc, DISPC_OVL_ATTRIBUTES2(plane), wbdelay, 7, 0);
>  	}
>  
> -	return r;
> +	return 0;
>  }
>  
>  static int dispc_ovl_enable(struct dispc_device *dispc,
> -- 
> Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki.
> Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki
> 
> _______________________________________________
> dri-devel mailing list
> dri-devel@lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/dri-devel

[-- Attachment #1.2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]

[-- Attachment #2: Type: text/plain, Size: 160 bytes --]

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

[PATCHv2 08/17] drm/omap: Add pclk setting case when channel is DSS_WB

[Tomi Valkeinen]

From: Benoit Parrot <bparrot@ti.com>

In dispc_set_ovl_common() we need to initialize pclk to a valid
value when we use WB in capture mode (i.e. mem_2_mem is false).
Otherwise dispc_ovl_calc_scaling() fails.

Signed-off-by: Benoit Parrot <bparrot@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
 drivers/gpu/drm/omapdrm/dss/dispc.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/gpu/drm/omapdrm/dss/dispc.c b/drivers/gpu/drm/omapdrm/dss/dispc.c
index f0f729fc4ca2..3ad56b30c90a 100644
--- a/drivers/gpu/drm/omapdrm/dss/dispc.c
+++ b/drivers/gpu/drm/omapdrm/dss/dispc.c
@@ -2590,6 +2590,10 @@ static int dispc_ovl_setup_common(struct dispc_device *dispc,
 	unsigned long pclk = dispc_plane_pclk_rate(dispc, plane);
 	unsigned long lclk = dispc_plane_lclk_rate(dispc, plane);
 
+	/* when setting up WB, dispc_plane_pclk_rate() returns 0 */
+	if (plane == OMAP_DSS_WB)
+		pclk = vm->pixelclock;
+
 	if (paddr == 0 && rotation_type != OMAP_DSS_ROT_TILER)
 		return -EINVAL;
 
-- 
Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki.
Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

[PATCHv2 09/17] drm/omap: set WB channel-in in wb_setup()

[Tomi Valkeinen]

We need to know the WB channel-in in wb_setup() to be able to configure
WB properly for capture mode. At the moment channel-in is set
separately.

This patch moves channel-in to wb_setup().

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
 drivers/gpu/drm/omapdrm/dss/dispc.c | 12 +++---------
 drivers/gpu/drm/omapdrm/dss/dss.h   |  3 ++-
 2 files changed, 5 insertions(+), 10 deletions(-)

diff --git a/drivers/gpu/drm/omapdrm/dss/dispc.c b/drivers/gpu/drm/omapdrm/dss/dispc.c
index 3ad56b30c90a..ccfafce1ea89 100644
--- a/drivers/gpu/drm/omapdrm/dss/dispc.c
+++ b/drivers/gpu/drm/omapdrm/dss/dispc.c
@@ -1234,14 +1234,6 @@ static enum omap_channel dispc_ovl_get_channel_out(struct dispc_device *dispc,
 	}
 }
 
-void dispc_wb_set_channel_in(struct dispc_device *dispc,
-			     enum dss_writeback_channel channel)
-{
-	enum omap_plane_id plane = OMAP_DSS_WB;
-
-	REG_FLD_MOD(dispc, DISPC_OVL_ATTRIBUTES(plane), channel, 18, 16);
-}
-
 static void dispc_ovl_set_burst_size(struct dispc_device *dispc,
 				     enum omap_plane_id plane,
 				     enum omap_burst_size burst_size)
@@ -2764,7 +2756,8 @@ static int dispc_ovl_setup(struct dispc_device *dispc,
 
 int dispc_wb_setup(struct dispc_device *dispc,
 		   const struct omap_dss_writeback_info *wi,
-		   bool mem_to_mem, const struct videomode *vm)
+		   bool mem_to_mem, const struct videomode *vm,
+		   enum dss_writeback_channel channel_in)
 {
 	int r;
 	u32 l;
@@ -2809,6 +2802,7 @@ int dispc_wb_setup(struct dispc_device *dispc,
 	/* setup extra DISPC_WB_ATTRIBUTES */
 	l = dispc_read_reg(dispc, DISPC_OVL_ATTRIBUTES(plane));
 	l = FLD_MOD(l, truncation, 10, 10);	/* TRUNCATIONENABLE */
+	l = FLD_MOD(l, channel_in, 18, 16);	/* CHANNELIN */
 	l = FLD_MOD(l, mem_to_mem, 19, 19);	/* WRITEBACKMODE */
 	if (mem_to_mem)
 		l = FLD_MOD(l, 1, 26, 24);	/* CAPTUREMODE */
diff --git a/drivers/gpu/drm/omapdrm/dss/dss.h b/drivers/gpu/drm/omapdrm/dss/dss.h
index 6f6fd3d1b159..c56c3c59bf18 100644
--- a/drivers/gpu/drm/omapdrm/dss/dss.h
+++ b/drivers/gpu/drm/omapdrm/dss/dss.h
@@ -455,7 +455,8 @@ void dispc_wb_set_channel_in(struct dispc_device *dispc,
 			     enum dss_writeback_channel channel);
 int dispc_wb_setup(struct dispc_device *dispc,
 		   const struct omap_dss_writeback_info *wi,
-		   bool mem_to_mem, const struct videomode *vm);
+		   bool mem_to_mem, const struct videomode *vm,
+		   enum dss_writeback_channel channel_in);
 
 #ifdef CONFIG_OMAP2_DSS_COLLECT_IRQ_STATS
 static inline void dss_collect_irq_stats(u32 irqstatus, unsigned int *irq_arr)
-- 
Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki.
Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

[PATCHv2 10/17] drm/omap: fix WBDELAYCOUNT for HDMI

[Tomi Valkeinen]

For HDMI, WBDELAYCOUNT starts counting at the start of vsync, not at the
start of vfp.

This patch adjusts the wbdelay for HDMI accordingly.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
 drivers/gpu/drm/omapdrm/dss/dispc.c | 8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/omapdrm/dss/dispc.c b/drivers/gpu/drm/omapdrm/dss/dispc.c
index ccfafce1ea89..7398039954a5 100644
--- a/drivers/gpu/drm/omapdrm/dss/dispc.c
+++ b/drivers/gpu/drm/omapdrm/dss/dispc.c
@@ -2816,8 +2816,12 @@ int dispc_wb_setup(struct dispc_device *dispc,
 	} else {
 		int wbdelay;
 
-		wbdelay = min(vm->vfront_porch +
-			      vm->vsync_len + vm->vback_porch, (u32)255);
+		if (channel_in == DSS_WB_TV_MGR)
+			wbdelay = min(vm->vsync_len + vm->vback_porch,
+				(u32)255);
+		else
+			wbdelay = min(vm->vfront_porch +
+				vm->vsync_len + vm->vback_porch, (u32)255);
 
 		/* WBDELAYCOUNT */
 		REG_FLD_MOD(dispc, DISPC_OVL_ATTRIBUTES2(plane), wbdelay, 7, 0);
-- 
Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki.
Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

[PATCHv2 11/17] drm/omap: fix WBDELAYCOUNT with interlace

[Tomi Valkeinen]

Vertical blanking needs to be halved on interlace modes. WBDELAYCOUNT
was calculated without such halving, resulting in WBUNCOMPLETE errors.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Acked-by: Benoit Parrot <bparrot@ti.com>
---
 drivers/gpu/drm/omapdrm/dss/dispc.c | 14 +++++++++-----
 1 file changed, 9 insertions(+), 5 deletions(-)

diff --git a/drivers/gpu/drm/omapdrm/dss/dispc.c b/drivers/gpu/drm/omapdrm/dss/dispc.c
index 7398039954a5..000a3d4a27bf 100644
--- a/drivers/gpu/drm/omapdrm/dss/dispc.c
+++ b/drivers/gpu/drm/omapdrm/dss/dispc.c
@@ -2814,14 +2814,18 @@ int dispc_wb_setup(struct dispc_device *dispc,
 		/* WBDELAYCOUNT */
 		REG_FLD_MOD(dispc, DISPC_OVL_ATTRIBUTES2(plane), 0, 7, 0);
 	} else {
-		int wbdelay;
+		u32 wbdelay;
 
 		if (channel_in == DSS_WB_TV_MGR)
-			wbdelay = min(vm->vsync_len + vm->vback_porch,
-				(u32)255);
+			wbdelay = vm->vsync_len + vm->vback_porch;
 		else
-			wbdelay = min(vm->vfront_porch +
-				vm->vsync_len + vm->vback_porch, (u32)255);
+			wbdelay = vm->vfront_porch + vm->vsync_len +
+				vm->vback_porch;
+
+		if (vm->flags & DISPLAY_FLAGS_INTERLACED)
+			wbdelay /= 2;
+
+		wbdelay = min(wbdelay, 255u);
 
 		/* WBDELAYCOUNT */
 		REG_FLD_MOD(dispc, DISPC_OVL_ATTRIBUTES2(plane), wbdelay, 7, 0);
-- 
Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki.
Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

[PATCHv2 12/17] drm/omap: fix WB height with interlace

[Tomi Valkeinen]

When using WB capture from interlaced source, we need to halve the
picture heights correctly.

Unfortunately the current dispc_ovl_setup_common() doesn't deal with
interlace very neatly, so the end result is a bit messy.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Acked-by: Benoit Parrot <bparrot@ti.com>
---
 drivers/gpu/drm/omapdrm/dss/dispc.c | 28 ++++++++++++++++------------
 1 file changed, 16 insertions(+), 12 deletions(-)

diff --git a/drivers/gpu/drm/omapdrm/dss/dispc.c b/drivers/gpu/drm/omapdrm/dss/dispc.c
index 000a3d4a27bf..72f00e8a1329 100644
--- a/drivers/gpu/drm/omapdrm/dss/dispc.c
+++ b/drivers/gpu/drm/omapdrm/dss/dispc.c
@@ -2597,18 +2597,19 @@ static int dispc_ovl_setup_common(struct dispc_device *dispc,
 	out_width = out_width == 0 ? width : out_width;
 	out_height = out_height == 0 ? height : out_height;
 
-	if (ilace && height == out_height)
-		fieldmode = true;
-
-	if (ilace) {
-		if (fieldmode)
-			in_height /= 2;
-		pos_y /= 2;
-		out_height /= 2;
-
-		DSSDBG("adjusting for ilace: height %d, pos_y %d, "
-			"out_height %d\n", in_height, pos_y,
-			out_height);
+	if (plane != OMAP_DSS_WB) {
+		if (ilace && height == out_height)
+			fieldmode = true;
+
+		if (ilace) {
+			if (fieldmode)
+				in_height /= 2;
+			pos_y /= 2;
+			out_height /= 2;
+
+			DSSDBG("adjusting for ilace: height %d, pos_y %d, out_height %d\n",
+				in_height, pos_y, out_height);
+		}
 	}
 
 	if (!dispc_ovl_color_mode_supported(dispc, plane, fourcc))
@@ -2771,6 +2772,9 @@ int dispc_wb_setup(struct dispc_device *dispc,
 	enum omap_overlay_caps caps =
 		OMAP_DSS_OVL_CAP_SCALE | OMAP_DSS_OVL_CAP_PRE_MULT_ALPHA;
 
+	if (vm->flags & DISPLAY_FLAGS_INTERLACED)
+		in_height /= 2;
+
 	DSSDBG("dispc_wb_setup, pa %x, pa_uv %x, %d,%d -> %dx%d, cmode %x, "
 		"rot %d\n", wi->paddr, wi->p_uv_addr, in_width,
 		in_height, wi->width, wi->height, wi->fourcc, wi->rotation);
-- 
Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki.
Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

[PATCHv2 13/17] drm/omap: fix scaling limits for WB

[Tomi Valkeinen]

WB has additional scaling limits when the output color format is one of
the YUV formats. These limits are not handled at the moment, causing
bad scaling and/or NULL dereference crash.

This patchs adds the check so that dispc returns an error for bad
scaling request.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
 drivers/gpu/drm/omapdrm/dss/dispc.c | 24 ++++++++++++++++++++----
 1 file changed, 20 insertions(+), 4 deletions(-)

diff --git a/drivers/gpu/drm/omapdrm/dss/dispc.c b/drivers/gpu/drm/omapdrm/dss/dispc.c
index 72f00e8a1329..2aa72845f819 100644
--- a/drivers/gpu/drm/omapdrm/dss/dispc.c
+++ b/drivers/gpu/drm/omapdrm/dss/dispc.c
@@ -2475,6 +2475,7 @@ static int dispc_ovl_calc_scaling_44xx(struct dispc_device *dispc,
 	((dividend) * 100 / (divisor) - ((dividend) / (divisor) * 100))
 
 static int dispc_ovl_calc_scaling(struct dispc_device *dispc,
+				  enum omap_plane_id plane,
 				  unsigned long pclk, unsigned long lclk,
 				  enum omap_overlay_caps caps,
 				  const struct videomode *vm,
@@ -2485,7 +2486,8 @@ static int dispc_ovl_calc_scaling(struct dispc_device *dispc,
 				  enum omap_dss_rotation_type rotation_type,
 				  bool mem_to_mem)
 {
-	const int maxdownscale = dispc->feat->max_downscale;
+	int maxhdownscale = dispc->feat->max_downscale;
+	int maxvdownscale = dispc->feat->max_downscale;
 	const int max_decim_limit = 16;
 	unsigned long core_clk = 0;
 	int decim_x, decim_y, ret;
@@ -2493,6 +2495,20 @@ static int dispc_ovl_calc_scaling(struct dispc_device *dispc,
 	if (width == out_width && height == out_height)
 		return 0;
 
+	if (plane == OMAP_DSS_WB) {
+		switch (fourcc) {
+		case DRM_FORMAT_NV12:
+			maxhdownscale = maxvdownscale = 2;
+			break;
+		case DRM_FORMAT_YUYV:
+		case DRM_FORMAT_UYVY:
+			maxhdownscale = 2;
+			maxvdownscale = 4;
+			break;
+		default:
+			break;
+		}
+	}
 	if (!mem_to_mem && (pclk == 0 || vm->pixelclock == 0)) {
 		DSSERR("cannot calculate scaling settings: pclk is zero\n");
 		return -EINVAL;
@@ -2510,8 +2526,8 @@ static int dispc_ovl_calc_scaling(struct dispc_device *dispc,
 				2 : max_decim_limit;
 	}
 
-	decim_x = DIV_ROUND_UP(DIV_ROUND_UP(width, out_width), maxdownscale);
-	decim_y = DIV_ROUND_UP(DIV_ROUND_UP(height, out_height), maxdownscale);
+	decim_x = DIV_ROUND_UP(DIV_ROUND_UP(width, out_width), maxhdownscale);
+	decim_y = DIV_ROUND_UP(DIV_ROUND_UP(height, out_height), maxvdownscale);
 
 	if (decim_x > *x_predecim || out_width > width * 8)
 		return -EINVAL;
@@ -2615,7 +2631,7 @@ static int dispc_ovl_setup_common(struct dispc_device *dispc,
 	if (!dispc_ovl_color_mode_supported(dispc, plane, fourcc))
 		return -EINVAL;
 
-	r = dispc_ovl_calc_scaling(dispc, pclk, lclk, caps, vm, in_width,
+	r = dispc_ovl_calc_scaling(dispc, plane, pclk, lclk, caps, vm, in_width,
 				   in_height, out_width, out_height, fourcc,
 				   &five_taps, &x_predecim, &y_predecim, pos_x,
 				   rotation_type, mem_to_mem);
-- 
Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki.
Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

[PATCHv2 14/17] drm/omap: add writeback funcs to dispc_ops

[Tomi Valkeinen]

Add writeback specific dispc functions to dispc_ops so that omapdrm can
use them.  Also move 'enum dss_writeback_channel' to the public
omapdss.h for omapdrm.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
 drivers/gpu/drm/omapdrm/dss/dispc.c   | 19 +++++++++++++++----
 drivers/gpu/drm/omapdrm/dss/dss.h     | 21 ---------------------
 drivers/gpu/drm/omapdrm/dss/omapdss.h | 20 ++++++++++++++++++++
 3 files changed, 35 insertions(+), 25 deletions(-)

diff --git a/drivers/gpu/drm/omapdrm/dss/dispc.c b/drivers/gpu/drm/omapdrm/dss/dispc.c
index 2aa72845f819..57960df1517a 100644
--- a/drivers/gpu/drm/omapdrm/dss/dispc.c
+++ b/drivers/gpu/drm/omapdrm/dss/dispc.c
@@ -715,7 +715,7 @@ static u32 dispc_mgr_get_sync_lost_irq(struct dispc_device *dispc,
 	return mgr_desc[channel].sync_lost_irq;
 }
 
-u32 dispc_wb_get_framedone_irq(struct dispc_device *dispc)
+static u32 dispc_wb_get_framedone_irq(struct dispc_device *dispc)
 {
 	return DISPC_IRQ_FRAMEDONEWB;
 }
@@ -750,12 +750,12 @@ static void dispc_mgr_go(struct dispc_device *dispc, enum omap_channel channel)
 	mgr_fld_write(dispc, channel, DISPC_MGR_FLD_GO, 1);
 }
 
-bool dispc_wb_go_busy(struct dispc_device *dispc)
+static bool dispc_wb_go_busy(struct dispc_device *dispc)
 {
 	return REG_GET(dispc, DISPC_CONTROL2, 6, 6) == 1;
 }
 
-void dispc_wb_go(struct dispc_device *dispc)
+static void dispc_wb_go(struct dispc_device *dispc)
 {
 	enum omap_plane_id plane = OMAP_DSS_WB;
 	bool enable, go;
@@ -2771,7 +2771,7 @@ static int dispc_ovl_setup(struct dispc_device *dispc,
 	return r;
 }
 
-int dispc_wb_setup(struct dispc_device *dispc,
+static int dispc_wb_setup(struct dispc_device *dispc,
 		   const struct omap_dss_writeback_info *wi,
 		   bool mem_to_mem, const struct videomode *vm,
 		   enum dss_writeback_channel channel_in)
@@ -2854,6 +2854,11 @@ int dispc_wb_setup(struct dispc_device *dispc,
 	return 0;
 }
 
+static bool dispc_has_writeback(struct dispc_device *dispc)
+{
+	return dispc->feat->has_writeback;
+}
+
 static int dispc_ovl_enable(struct dispc_device *dispc,
 			    enum omap_plane_id plane, bool enable)
 {
@@ -4709,6 +4714,12 @@ static const struct dispc_ops dispc_ops = {
 	.ovl_enable = dispc_ovl_enable,
 	.ovl_setup = dispc_ovl_setup,
 	.ovl_get_color_modes = dispc_ovl_get_color_modes,
+
+	.wb_get_framedone_irq = dispc_wb_get_framedone_irq,
+	.wb_setup = dispc_wb_setup,
+	.has_writeback = dispc_has_writeback,
+	.wb_go_busy = dispc_wb_go_busy,
+	.wb_go = dispc_wb_go,
 };
 
 /* DISPC HW IP initialisation */
diff --git a/drivers/gpu/drm/omapdrm/dss/dss.h b/drivers/gpu/drm/omapdrm/dss/dss.h
index c56c3c59bf18..c601ed9a09c2 100644
--- a/drivers/gpu/drm/omapdrm/dss/dss.h
+++ b/drivers/gpu/drm/omapdrm/dss/dss.h
@@ -102,17 +102,6 @@ enum dss_dsi_content_type {
 	DSS_DSI_CONTENT_GENERIC,
 };
 
-enum dss_writeback_channel {
-	DSS_WB_LCD1_MGR =	0,
-	DSS_WB_LCD2_MGR =	1,
-	DSS_WB_TV_MGR =		2,
-	DSS_WB_OVL0 =		3,
-	DSS_WB_OVL1 =		4,
-	DSS_WB_OVL2 =		5,
-	DSS_WB_OVL3 =		6,
-	DSS_WB_LCD3_MGR =	7,
-};
-
 enum dss_clk_source {
 	DSS_CLK_SRC_FCK = 0,
 
@@ -448,16 +437,6 @@ int dispc_mgr_get_clock_div(struct dispc_device *dispc,
 			    struct dispc_clock_info *cinfo);
 void dispc_set_tv_pclk(struct dispc_device *dispc, unsigned long pclk);
 
-u32 dispc_wb_get_framedone_irq(struct dispc_device *dispc);
-bool dispc_wb_go_busy(struct dispc_device *dispc);
-void dispc_wb_go(struct dispc_device *dispc);
-void dispc_wb_set_channel_in(struct dispc_device *dispc,
-			     enum dss_writeback_channel channel);
-int dispc_wb_setup(struct dispc_device *dispc,
-		   const struct omap_dss_writeback_info *wi,
-		   bool mem_to_mem, const struct videomode *vm,
-		   enum dss_writeback_channel channel_in);
-
 #ifdef CONFIG_OMAP2_DSS_COLLECT_IRQ_STATS
 static inline void dss_collect_irq_stats(u32 irqstatus, unsigned int *irq_arr)
 {
diff --git a/drivers/gpu/drm/omapdrm/dss/omapdss.h b/drivers/gpu/drm/omapdrm/dss/omapdss.h
index 162f36fa3431..14d74adb13fb 100644
--- a/drivers/gpu/drm/omapdrm/dss/omapdss.h
+++ b/drivers/gpu/drm/omapdrm/dss/omapdss.h
@@ -626,6 +626,17 @@ omapdss_of_find_source_for_first_ep(struct device_node *node);
 struct device_node *dss_of_port_get_parent_device(struct device_node *port);
 u32 dss_of_port_get_port_number(struct device_node *port);
 
+enum dss_writeback_channel {
+	DSS_WB_LCD1_MGR =	0,
+	DSS_WB_LCD2_MGR =	1,
+	DSS_WB_TV_MGR =		2,
+	DSS_WB_OVL0 =		3,
+	DSS_WB_OVL1 =		4,
+	DSS_WB_OVL2 =		5,
+	DSS_WB_OVL3 =		6,
+	DSS_WB_LCD3_MGR =	7,
+};
+
 struct dss_mgr_ops {
 	int (*connect)(struct omap_drm_private *priv,
 		       enum omap_channel channel,
@@ -732,6 +743,15 @@ struct dispc_ops {
 
 	const u32 *(*ovl_get_color_modes)(struct dispc_device *dispc,
 					  enum omap_plane_id plane);
+
+	u32 (*wb_get_framedone_irq)(struct dispc_device *dispc);
+	int (*wb_setup)(struct dispc_device *dispc,
+		const struct omap_dss_writeback_info *wi,
+		bool mem_to_mem, const struct videomode *vm,
+		enum dss_writeback_channel channel_in);
+	bool (*has_writeback)(struct dispc_device *dispc);
+	bool (*wb_go_busy)(struct dispc_device *dispc);
+	void (*wb_go)(struct dispc_device *dispc);
 };
 
 struct dispc_device *dispc_get_dispc(struct dss_device *dss);
-- 
Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki.
Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

[PATCHv2 15/17] drm/omap: fix maximum sizes

[Tomi Valkeinen]

We define max width and height in mode_config to 2048. These maximums
affect many things, which are independent and depend on platform. We
need to do more fine grained checks in the code paths for each
component, and so the maximum values in mode_config should just be "big
enough" to cover all use cases.

Change the maximum width & height to 8192.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
 drivers/gpu/drm/omapdrm/omap_drv.c | 11 +++++++----
 1 file changed, 7 insertions(+), 4 deletions(-)

diff --git a/drivers/gpu/drm/omapdrm/omap_drv.c b/drivers/gpu/drm/omapdrm/omap_drv.c
index 4f48b908bdc6..3632854c2b91 100644
--- a/drivers/gpu/drm/omapdrm/omap_drv.c
+++ b/drivers/gpu/drm/omapdrm/omap_drv.c
@@ -310,11 +310,14 @@ static int omap_modeset_init(struct drm_device *dev)
 	dev->mode_config.min_width = 8;
 	dev->mode_config.min_height = 2;
 
-	/* note: eventually will need some cpu_is_omapXYZ() type stuff here
-	 * to fill in these limits properly on different OMAP generations..
+	/*
+	 * Note: these values are used for multiple independent things:
+	 * connector mode filtering, buffer sizes, crtc sizes...
+	 * Use big enough values here to cover all use cases, and do more
+	 * specific checking in the respective code paths.
 	 */
-	dev->mode_config.max_width = 2048;
-	dev->mode_config.max_height = 2048;
+	dev->mode_config.max_width = 8192;
+	dev->mode_config.max_height = 8192;
 
 	dev->mode_config.funcs = &omap_mode_config_funcs;
 	dev->mode_config.helper_private = &omap_mode_config_helper_funcs;
-- 
Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki.
Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

[PATCHv2 16/17] drm/omap: Allow HDMI audio setup even if we do not have video configured

[Tomi Valkeinen]

From: Jyri Sarha <jsarha@ti.com>

Allow HDMI audio setup even if we do not have video configured. Audio
will get configured at the same time with video if the video is
configured soon enough. If it is not the audio DMA will timeout in
couple of seconds and audio playback will be aborted.

Signed-off-by: Jyri Sarha <jsarha@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
 drivers/gpu/drm/omapdrm/dss/hdmi4.c | 33 ++++++++++++++-------------------
 drivers/gpu/drm/omapdrm/dss/hdmi5.c | 37 ++++++++++++++++---------------------
 2 files changed, 30 insertions(+), 40 deletions(-)

diff --git a/drivers/gpu/drm/omapdrm/dss/hdmi4.c b/drivers/gpu/drm/omapdrm/dss/hdmi4.c
index 1f7897c58f2f..97c88861d67a 100644
--- a/drivers/gpu/drm/omapdrm/dss/hdmi4.c
+++ b/drivers/gpu/drm/omapdrm/dss/hdmi4.c
@@ -615,21 +615,16 @@ static int hdmi_audio_startup(struct device *dev,
 			      void (*abort_cb)(struct device *dev))
 {
 	struct omap_hdmi *hd = dev_get_drvdata(dev);
-	int ret = 0;
 
 	mutex_lock(&hd->lock);
 
-	if (!hdmi_mode_has_audio(&hd->cfg) || !hd->display_enabled) {
-		ret = -EPERM;
-		goto out;
-	}
+	WARN_ON(hd->audio_abort_cb != NULL);
 
 	hd->audio_abort_cb = abort_cb;
 
-out:
 	mutex_unlock(&hd->lock);
 
-	return ret;
+	return 0;
 }
 
 static int hdmi_audio_shutdown(struct device *dev)
@@ -650,12 +645,14 @@ static int hdmi_audio_start(struct device *dev)
 	struct omap_hdmi *hd = dev_get_drvdata(dev);
 	unsigned long flags;
 
-	WARN_ON(!hdmi_mode_has_audio(&hd->cfg));
-
 	spin_lock_irqsave(&hd->audio_playing_lock, flags);
 
-	if (hd->display_enabled)
+	if (hd->display_enabled) {
+		if (!hdmi_mode_has_audio(&hd->cfg))
+			DSSERR("%s: Video mode does not support audio\n",
+			       __func__);
 		hdmi_start_audio_stream(hd);
+	}
 	hd->audio_playing = true;
 
 	spin_unlock_irqrestore(&hd->audio_playing_lock, flags);
@@ -686,17 +683,15 @@ static int hdmi_audio_config(struct device *dev,
 
 	mutex_lock(&hd->lock);
 
-	if (!hdmi_mode_has_audio(&hd->cfg) || !hd->display_enabled) {
-		ret = -EPERM;
-		goto out;
+	if (hd->display_enabled) {
+		ret = hdmi4_audio_config(&hd->core, &hd->wp, dss_audio,
+					 hd->cfg.vm.pixelclock);
+		if (ret)
+			goto out;
 	}
 
-	ret = hdmi4_audio_config(&hd->core, &hd->wp, dss_audio,
-				 hd->cfg.vm.pixelclock);
-	if (!ret) {
-		hd->audio_configured = true;
-		hd->audio_config = *dss_audio;
-	}
+	hd->audio_configured = true;
+	hd->audio_config = *dss_audio;
 out:
 	mutex_unlock(&hd->lock);
 
diff --git a/drivers/gpu/drm/omapdrm/dss/hdmi5.c b/drivers/gpu/drm/omapdrm/dss/hdmi5.c
index 4a0178ab8016..d28da9ac3e90 100644
--- a/drivers/gpu/drm/omapdrm/dss/hdmi5.c
+++ b/drivers/gpu/drm/omapdrm/dss/hdmi5.c
@@ -606,21 +606,16 @@ static int hdmi_audio_startup(struct device *dev,
 			      void (*abort_cb)(struct device *dev))
 {
 	struct omap_hdmi *hd = dev_get_drvdata(dev);
-	int ret = 0;
 
 	mutex_lock(&hd->lock);
 
-	if (!hdmi_mode_has_audio(&hd->cfg) || !hd->display_enabled) {
-		ret = -EPERM;
-		goto out;
-	}
+	WARN_ON(hd->audio_abort_cb != NULL);
 
 	hd->audio_abort_cb = abort_cb;
 
-out:
 	mutex_unlock(&hd->lock);
 
-	return ret;
+	return 0;
 }
 
 static int hdmi_audio_shutdown(struct device *dev)
@@ -641,12 +636,14 @@ static int hdmi_audio_start(struct device *dev)
 	struct omap_hdmi *hd = dev_get_drvdata(dev);
 	unsigned long flags;
 
-	WARN_ON(!hdmi_mode_has_audio(&hd->cfg));
-
 	spin_lock_irqsave(&hd->audio_playing_lock, flags);
 
-	if (hd->display_enabled)
+	if (hd->display_enabled) {
+		if (!hdmi_mode_has_audio(&hd->cfg))
+			DSSERR("%s: Video mode does not support audio\n",
+			       __func__);
 		hdmi_start_audio_stream(hd);
+	}
 	hd->audio_playing = true;
 
 	spin_unlock_irqrestore(&hd->audio_playing_lock, flags);
@@ -658,7 +655,8 @@ static void hdmi_audio_stop(struct device *dev)
 	struct omap_hdmi *hd = dev_get_drvdata(dev);
 	unsigned long flags;
 
-	WARN_ON(!hdmi_mode_has_audio(&hd->cfg));
+	if (!hdmi_mode_has_audio(&hd->cfg))
+		DSSERR("%s: Video mode does not support audio\n", __func__);
 
 	spin_lock_irqsave(&hd->audio_playing_lock, flags);
 
@@ -677,18 +675,15 @@ static int hdmi_audio_config(struct device *dev,
 
 	mutex_lock(&hd->lock);
 
-	if (!hdmi_mode_has_audio(&hd->cfg) || !hd->display_enabled) {
-		ret = -EPERM;
-		goto out;
+	if (hd->display_enabled) {
+		ret = hdmi5_audio_config(&hd->core, &hd->wp, dss_audio,
+					 hd->cfg.vm.pixelclock);
+		if (ret)
+			goto out;
 	}
 
-	ret = hdmi5_audio_config(&hd->core, &hd->wp, dss_audio,
-				 hd->cfg.vm.pixelclock);
-
-	if (!ret) {
-		hd->audio_configured = true;
-		hd->audio_config = *dss_audio;
-	}
+	hd->audio_configured = true;
+	hd->audio_config = *dss_audio;
 out:
 	mutex_unlock(&hd->lock);
 
-- 
Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki.
Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

[PATCHv2 17/17] drm/omap: cleanup color space conversion

[Tomi Valkeinen]

The setup code for color space conversion is a bit messy. This patch
cleans it up.

For some reason the TRM uses values in YCrCb order, which is also used
in the current driver, whereas everywhere else it's YCbCr (which also
matches YUV order). This patch changes the tables to use the common
order to avoid confusion.

The tables are split into separate lines, and comments added for
clarity.

WB color conversion registers are similar but different than non-WB, but
the same function was used to write both. It worked fine because the
coef table was adjusted accordingly, but that was rather confusing. This
patch adds a separate function to write the WB values so that the coef
table can be written in an understandable way.

Recalculation also showed that 'bcb' value in yuv-to-rgb conversion had
been rounded wrongly, and it should be 516 instead of 517.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
 drivers/gpu/drm/omapdrm/dss/dispc.c | 59 +++++++++++++++++++++++++++----------
 1 file changed, 44 insertions(+), 15 deletions(-)

diff --git a/drivers/gpu/drm/omapdrm/dss/dispc.c b/drivers/gpu/drm/omapdrm/dss/dispc.c
index 57960df1517a..f688f09b4eae 100644
--- a/drivers/gpu/drm/omapdrm/dss/dispc.c
+++ b/drivers/gpu/drm/omapdrm/dss/dispc.c
@@ -352,11 +352,6 @@ static const struct {
 	},
 };
 
-struct color_conv_coef {
-	int ry, rcr, rcb, gy, gcr, gcb, by, bcr, bcb;
-	int full_range;
-};
-
 static unsigned long dispc_fclk_rate(struct dispc_device *dispc);
 static unsigned long dispc_core_clk_rate(struct dispc_device *dispc);
 static unsigned long dispc_mgr_lclk_rate(struct dispc_device *dispc,
@@ -868,10 +863,19 @@ static void dispc_ovl_set_scale_coef(struct dispc_device *dispc,
 	}
 }
 
+struct csc_coef_yuv2rgb {
+	int ry, rcb, rcr, gy, gcb, gcr, by, bcb, bcr;
+	bool full_range;
+};
+
+struct csc_coef_rgb2yuv {
+	int yr, yg, yb, cbr, cbg, cbb, crr, crg, crb;
+	bool full_range;
+};
 
 static void dispc_ovl_write_color_conv_coef(struct dispc_device *dispc,
 					    enum omap_plane_id plane,
-					    const struct color_conv_coef *ct)
+					    const struct csc_coef_yuv2rgb *ct)
 {
 #define CVAL(x, y) (FLD_VAL(x, 26, 16) | FLD_VAL(y, 10, 0))
 
@@ -886,25 +890,50 @@ static void dispc_ovl_write_color_conv_coef(struct dispc_device *dispc,
 #undef CVAL
 }
 
+static void dispc_wb_write_color_conv_coef(struct dispc_device *dispc,
+					   const struct csc_coef_rgb2yuv *ct)
+{
+	const enum omap_plane_id plane = OMAP_DSS_WB;
+
+#define CVAL(x, y) (FLD_VAL(x, 26, 16) | FLD_VAL(y, 10, 0))
+
+	dispc_write_reg(dispc, DISPC_OVL_CONV_COEF(plane, 0), CVAL(ct->yg,  ct->yr));
+	dispc_write_reg(dispc, DISPC_OVL_CONV_COEF(plane, 1), CVAL(ct->crr, ct->yb));
+	dispc_write_reg(dispc, DISPC_OVL_CONV_COEF(plane, 2), CVAL(ct->crb, ct->crg));
+	dispc_write_reg(dispc, DISPC_OVL_CONV_COEF(plane, 3), CVAL(ct->cbg, ct->cbr));
+	dispc_write_reg(dispc, DISPC_OVL_CONV_COEF(plane, 4), CVAL(0, ct->cbb));
+
+	REG_FLD_MOD(dispc, DISPC_OVL_ATTRIBUTES(plane), !!ct->full_range, 11, 11);
+
+#undef CVAL
+}
+
 static void dispc_setup_color_conv_coef(struct dispc_device *dispc)
 {
 	int i;
 	int num_ovl = dispc_get_num_ovls(dispc);
-	const struct color_conv_coef ctbl_bt601_5_ovl = {
-		/* YUV -> RGB */
-		298, 409, 0, 298, -208, -100, 298, 0, 517, 0,
+
+	/* YUV -> RGB, ITU-R BT.601, limited range */
+	const struct csc_coef_yuv2rgb coefs_yuv2rgb_bt601_lim = {
+		298,    0,  409,	/* ry, rcb, rcr */
+		298, -100, -208,	/* gy, gcb, gcr */
+		298,  516,    0,	/* by, bcb, bcr */
+		false,			/* limited range */
 	};
-	const struct color_conv_coef ctbl_bt601_5_wb = {
-		/* RGB -> YUV */
-		66, 129, 25, 112, -94, -18, -38, -74, 112, 0,
+
+	/* RGB -> YUV, ITU-R BT.601, limited range */
+	const struct csc_coef_rgb2yuv coefs_rgb2yuv_bt601_lim = {
+		 66, 129,  25,		/* yr,   yg,  yb */
+		-38, -74, 112,		/* cbr, cbg, cbb */
+		112, -94, -18,		/* crr, crg, crb */
+		false,			/* limited range */
 	};
 
 	for (i = 1; i < num_ovl; i++)
-		dispc_ovl_write_color_conv_coef(dispc, i, &ctbl_bt601_5_ovl);
+		dispc_ovl_write_color_conv_coef(dispc, i, &coefs_yuv2rgb_bt601_lim);
 
 	if (dispc->feat->has_writeback)
-		dispc_ovl_write_color_conv_coef(dispc, OMAP_DSS_WB,
-						&ctbl_bt601_5_wb);
+		dispc_wb_write_color_conv_coef(dispc, &coefs_rgb2yuv_bt601_lim);
 }
 
 static void dispc_ovl_set_ba0(struct dispc_device *dispc,
-- 
Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki.
Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

Re: [PATCHv2 17/17] drm/omap: cleanup color space conversion

[Laurent Pinchart]

Hi Tomi,

Thank you for the patch.

On Wednesday, 28 February 2018 13:26:14 EET Tomi Valkeinen wrote:
> The setup code for color space conversion is a bit messy. This patch
> cleans it up.
> 
> For some reason the TRM uses values in YCrCb order, which is also used
> in the current driver, whereas everywhere else it's YCbCr (which also
> matches YUV order). This patch changes the tables to use the common
> order to avoid confusion.
> 
> The tables are split into separate lines, and comments added for
> clarity.
> 
> WB color conversion registers are similar but different than non-WB, but
> the same function was used to write both. It worked fine because the
> coef table was adjusted accordingly, but that was rather confusing. This
> patch adds a separate function to write the WB values so that the coef
> table can be written in an understandable way.
> 
> Recalculation also showed that 'bcb' value in yuv-to-rgb conversion had
> been rounded wrongly, and it should be 516 instead of 517.
> 
> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
> ---
>  drivers/gpu/drm/omapdrm/dss/dispc.c | 59 +++++++++++++++++++++++++---------
>  1 file changed, 44 insertions(+), 15 deletions(-)
> 
> diff --git a/drivers/gpu/drm/omapdrm/dss/dispc.c
> b/drivers/gpu/drm/omapdrm/dss/dispc.c index 57960df1517a..f688f09b4eae
> 100644
> --- a/drivers/gpu/drm/omapdrm/dss/dispc.c
> +++ b/drivers/gpu/drm/omapdrm/dss/dispc.c
> @@ -352,11 +352,6 @@ static const struct {
>  	},
>  };
> 
> -struct color_conv_coef {
> -	int ry, rcr, rcb, gy, gcr, gcb, by, bcr, bcb;
> -	int full_range;
> -};
> -
>  static unsigned long dispc_fclk_rate(struct dispc_device *dispc);
>  static unsigned long dispc_core_clk_rate(struct dispc_device *dispc);
>  static unsigned long dispc_mgr_lclk_rate(struct dispc_device *dispc,
> @@ -868,10 +863,19 @@ static void dispc_ovl_set_scale_coef(struct
> dispc_device *dispc, }
>  }
> 
> +struct csc_coef_yuv2rgb {
> +	int ry, rcb, rcr, gy, gcb, gcr, by, bcb, bcr;
> +	bool full_range;
> +};
> +
> +struct csc_coef_rgb2yuv {
> +	int yr, yg, yb, cbr, cbg, cbb, crr, crg, crb;
> +	bool full_range;
> +};
> 
>  static void dispc_ovl_write_color_conv_coef(struct dispc_device *dispc,
>  					    enum omap_plane_id plane,
> -					    const struct color_conv_coef *ct)
> +					    const struct csc_coef_yuv2rgb *ct)
>  {
>  #define CVAL(x, y) (FLD_VAL(x, 26, 16) | FLD_VAL(y, 10, 0))
> 
> @@ -886,25 +890,50 @@ static void dispc_ovl_write_color_conv_coef(struct
> dispc_device *dispc, #undef CVAL
>  }
> 
> +static void dispc_wb_write_color_conv_coef(struct dispc_device *dispc,
> +					   const struct csc_coef_rgb2yuv *ct)
> +{
> +	const enum omap_plane_id plane = OMAP_DSS_WB;
> +
> +#define CVAL(x, y) (FLD_VAL(x, 26, 16) | FLD_VAL(y, 10, 0))
> +
> +	dispc_write_reg(dispc, DISPC_OVL_CONV_COEF(plane, 0), CVAL(ct->yg, 
> ct->yr));
> +	dispc_write_reg(dispc, DISPC_OVL_CONV_COEF(plane, 1), CVAL(ct->crr,
> ct->yb));
> +	dispc_write_reg(dispc, DISPC_OVL_CONV_COEF(plane, 2), CVAL(ct->crb,
> ct->crg));
> +	dispc_write_reg(dispc, DISPC_OVL_CONV_COEF(plane, 3), CVAL(ct->cbg,
> ct->cbr));
> +	dispc_write_reg(dispc, DISPC_OVL_CONV_COEF(plane, 4), CVAL(0, ct->cbb));
> +
> +	REG_FLD_MOD(dispc, DISPC_OVL_ATTRIBUTES(plane), !!ct->full_range, 11, 11);

I think I mentioned in my review of v1 that you can drop the !!. Apart from 
that,

Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>

> +#undef CVAL
> +}
> +
>  static void dispc_setup_color_conv_coef(struct dispc_device *dispc)
>  {
>  	int i;
>  	int num_ovl = dispc_get_num_ovls(dispc);
> -	const struct color_conv_coef ctbl_bt601_5_ovl = {
> -		/* YUV -> RGB */
> -		298, 409, 0, 298, -208, -100, 298, 0, 517, 0,
> +
> +	/* YUV -> RGB, ITU-R BT.601, limited range */
> +	const struct csc_coef_yuv2rgb coefs_yuv2rgb_bt601_lim = {
> +		298,    0,  409,	/* ry, rcb, rcr */
> +		298, -100, -208,	/* gy, gcb, gcr */
> +		298,  516,    0,	/* by, bcb, bcr */
> +		false,			/* limited range */
>  	};
> -	const struct color_conv_coef ctbl_bt601_5_wb = {
> -		/* RGB -> YUV */
> -		66, 129, 25, 112, -94, -18, -38, -74, 112, 0,
> +
> +	/* RGB -> YUV, ITU-R BT.601, limited range */
> +	const struct csc_coef_rgb2yuv coefs_rgb2yuv_bt601_lim = {
> +		 66, 129,  25,		/* yr,   yg,  yb */
> +		-38, -74, 112,		/* cbr, cbg, cbb */
> +		112, -94, -18,		/* crr, crg, crb */
> +		false,			/* limited range */
>  	};
> 
>  	for (i = 1; i < num_ovl; i++)
> -		dispc_ovl_write_color_conv_coef(dispc, i, &ctbl_bt601_5_ovl);
> +		dispc_ovl_write_color_conv_coef(dispc, i, &coefs_yuv2rgb_bt601_lim);
> 
>  	if (dispc->feat->has_writeback)
> -		dispc_ovl_write_color_conv_coef(dispc, OMAP_DSS_WB,
> -						&ctbl_bt601_5_wb);
> +		dispc_wb_write_color_conv_coef(dispc, &coefs_rgb2yuv_bt601_lim);
>  }
> 
>  static void dispc_ovl_set_ba0(struct dispc_device *dispc,

-- 
Regards,

Laurent Pinchart

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

Re: [PATCHv2 17/17] drm/omap: cleanup color space conversion

[Tomi Valkeinen]

On 28/02/18 23:23, Laurent Pinchart wrote:

>> +	REG_FLD_MOD(dispc, DISPC_OVL_ATTRIBUTES(plane), !!ct->full_range, 11, 11);
> 
> I think I mentioned in my review of v1 that you can drop the !!. Apart from 
> that,
> 
> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>

Sorry about. I did remove it, but I made a few versions of the change,
and apparently missed this in the final one. Now it's gone.

 Tomi

-- 
Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki.
Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel