* [PATCH] ath10k: Advertize beacon_int_min_gcd
@ 2018-03-07 13:12 ` Anilkumar Kolli
0 siblings, 0 replies; 4+ messages in thread
From: Anilkumar Kolli @ 2018-03-07 13:12 UTC (permalink / raw)
To: ath10k; +Cc: linux-wireless, Anilkumar Kolli
This patch fixes regression caused by 0c317a02ca98
("cfg80211: support virtual interfaces with different beacon intervals"),
with this change cfg80211 expects the driver to advertize
'beacon_int_min_gcd' to support different beacon intervals in multivap
scenario. This support is added for, QCA988X/QCA99X0/QCA9984/QCA4019.
Verifed AP + mesh bring up on QCA9984 with beacon interval 100msec and
1000msec respectively.
Frimware: firmware-5.bin_10.4-3.5.3-00053
Fixes: 0c317a02ca98 ("cfg80211: support virtual interfaces with different beacon intervals")
Signed-off-by: Anilkumar Kolli <akolli@codeaurora.org>
---
drivers/net/wireless/ath/ath10k/mac.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/drivers/net/wireless/ath/ath10k/mac.c b/drivers/net/wireless/ath/ath10k/mac.c
index ebb3f1b046f3..9486ef7cc06b 100644
--- a/drivers/net/wireless/ath/ath10k/mac.c
+++ b/drivers/net/wireless/ath/ath10k/mac.c
@@ -1,6 +1,7 @@
/*
* Copyright (c) 2005-2011 Atheros Communications Inc.
* Copyright (c) 2011-2017 Qualcomm Atheros, Inc.
+ * Copyright (c) 2018, The Linux Foundation. All rights reserved.
*
* Permission to use, copy, modify, and/or distribute this software for any
* purpose with or without fee is hereby granted, provided that the above
@@ -7874,6 +7875,7 @@ void ath10k_mac_destroy(struct ath10k *ar)
.max_interfaces = 8,
.num_different_channels = 1,
.beacon_int_infra_match = true,
+ .beacon_int_min_gcd = 1,
#ifdef CONFIG_ATH10K_DFS_CERTIFIED
.radar_detect_widths = BIT(NL80211_CHAN_WIDTH_20_NOHT) |
BIT(NL80211_CHAN_WIDTH_20) |
@@ -7997,6 +7999,7 @@ void ath10k_mac_destroy(struct ath10k *ar)
.max_interfaces = 16,
.num_different_channels = 1,
.beacon_int_infra_match = true,
+ .beacon_int_min_gcd = 1,
#ifdef CONFIG_ATH10K_DFS_CERTIFIED
.radar_detect_widths = BIT(NL80211_CHAN_WIDTH_20_NOHT) |
BIT(NL80211_CHAN_WIDTH_20) |
--
1.7.9.5
^ permalink raw reply related [flat|nested] 4+ messages in thread
* [PATCH] ath10k: Advertize beacon_int_min_gcd
@ 2018-03-07 13:12 ` Anilkumar Kolli
0 siblings, 0 replies; 4+ messages in thread
From: Anilkumar Kolli @ 2018-03-07 13:12 UTC (permalink / raw)
To: ath10k; +Cc: Anilkumar Kolli, linux-wireless
This patch fixes regression caused by 0c317a02ca98
("cfg80211: support virtual interfaces with different beacon intervals"),
with this change cfg80211 expects the driver to advertize
'beacon_int_min_gcd' to support different beacon intervals in multivap
scenario. This support is added for, QCA988X/QCA99X0/QCA9984/QCA4019.
Verifed AP + mesh bring up on QCA9984 with beacon interval 100msec and
1000msec respectively.
Frimware: firmware-5.bin_10.4-3.5.3-00053
Fixes: 0c317a02ca98 ("cfg80211: support virtual interfaces with different beacon intervals")
Signed-off-by: Anilkumar Kolli <akolli@codeaurora.org>
---
drivers/net/wireless/ath/ath10k/mac.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/drivers/net/wireless/ath/ath10k/mac.c b/drivers/net/wireless/ath/ath10k/mac.c
index ebb3f1b046f3..9486ef7cc06b 100644
--- a/drivers/net/wireless/ath/ath10k/mac.c
+++ b/drivers/net/wireless/ath/ath10k/mac.c
@@ -1,6 +1,7 @@
/*
* Copyright (c) 2005-2011 Atheros Communications Inc.
* Copyright (c) 2011-2017 Qualcomm Atheros, Inc.
+ * Copyright (c) 2018, The Linux Foundation. All rights reserved.
*
* Permission to use, copy, modify, and/or distribute this software for any
* purpose with or without fee is hereby granted, provided that the above
@@ -7874,6 +7875,7 @@ void ath10k_mac_destroy(struct ath10k *ar)
.max_interfaces = 8,
.num_different_channels = 1,
.beacon_int_infra_match = true,
+ .beacon_int_min_gcd = 1,
#ifdef CONFIG_ATH10K_DFS_CERTIFIED
.radar_detect_widths = BIT(NL80211_CHAN_WIDTH_20_NOHT) |
BIT(NL80211_CHAN_WIDTH_20) |
@@ -7997,6 +7999,7 @@ void ath10k_mac_destroy(struct ath10k *ar)
.max_interfaces = 16,
.num_different_channels = 1,
.beacon_int_infra_match = true,
+ .beacon_int_min_gcd = 1,
#ifdef CONFIG_ATH10K_DFS_CERTIFIED
.radar_detect_widths = BIT(NL80211_CHAN_WIDTH_20_NOHT) |
BIT(NL80211_CHAN_WIDTH_20) |
--
1.7.9.5
_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k
^ permalink raw reply related [flat|nested] 4+ messages in thread
* Re: ath10k: Advertize beacon_int_min_gcd
2018-03-07 13:12 ` Anilkumar Kolli
(?)
(?)
@ 2018-03-29 9:02 ` Kalle Valo
-1 siblings, 0 replies; 4+ messages in thread
From: Kalle Valo @ 2018-03-29 9:02 UTC (permalink / raw)
To: akolli; +Cc: ath10k, linux-wireless, Anilkumar Kolli
akolli@codeaurora.org wrote:
> This patch fixes regression caused by 0c317a02ca98
> ("cfg80211: support virtual interfaces with different beacon intervals"),
> with this change cfg80211 expects the driver to advertize
> 'beacon_int_min_gcd' to support different beacon intervals in multivap
> scenario. This support is added for, QCA988X/QCA99X0/QCA9984/QCA4019.
>
> Verifed AP + mesh bring up on QCA9984 with beacon interval 100msec and
> 1000msec respectively.
> Frimware: firmware-5.bin_10.4-3.5.3-00053
>
> Fixes: 0c317a02ca98 ("cfg80211: support virtual interfaces with different beacon intervals")
> Signed-off-by: Anilkumar Kolli <akolli@codeaurora.org>
> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Patch applied to ath-next branch of ath.git, thanks.
8ebee73b574a ath10k: advertize beacon_int_min_gcd
--
https://patchwork.kernel.org/patch/10263995/
https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: ath10k: Advertize beacon_int_min_gcd
2018-03-07 13:12 ` Anilkumar Kolli
(?)
@ 2018-03-29 9:02 ` Kalle Valo
-1 siblings, 0 replies; 4+ messages in thread
From: Kalle Valo @ 2018-03-29 9:02 UTC (permalink / raw)
To: akolli; +Cc: linux-wireless, ath10k
akolli@codeaurora.org wrote:
> This patch fixes regression caused by 0c317a02ca98
> ("cfg80211: support virtual interfaces with different beacon intervals"),
> with this change cfg80211 expects the driver to advertize
> 'beacon_int_min_gcd' to support different beacon intervals in multivap
> scenario. This support is added for, QCA988X/QCA99X0/QCA9984/QCA4019.
>
> Verifed AP + mesh bring up on QCA9984 with beacon interval 100msec and
> 1000msec respectively.
> Frimware: firmware-5.bin_10.4-3.5.3-00053
>
> Fixes: 0c317a02ca98 ("cfg80211: support virtual interfaces with different beacon intervals")
> Signed-off-by: Anilkumar Kolli <akolli@codeaurora.org>
> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Patch applied to ath-next branch of ath.git, thanks.
8ebee73b574a ath10k: advertize beacon_int_min_gcd
--
https://patchwork.kernel.org/patch/10263995/
https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches
_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2018-03-29 9:02 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2018-03-07 13:12 [PATCH] ath10k: Advertize beacon_int_min_gcd Anilkumar Kolli
2018-03-07 13:12 ` Anilkumar Kolli
2018-03-29 9:02 ` Kalle Valo
2018-03-29 9:02 ` Kalle Valo
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.