All of lore.kernel.org
 help / color / mirror / Atom feed
From: Sean Wang <sean.wang@mediatek.com>
To: Matthias Brugger <matthias.bgg@gmail.com>
Cc: <robh+dt@kernel.org>, <mark.rutland@arm.com>,
	<devicetree@vger.kernel.org>,
	<linux-mediatek@lists.infradead.org>,
	<linux-arm-kernel@lists.infradead.org>,
	<linux-kernel@vger.kernel.org>
Subject: Re: [PATCH v1 05/19] arm: dts: mt7623: add BTIF, HSDMA and SPI-NOR device nodes
Date: Mon, 12 Mar 2018 17:53:07 +0800	[thread overview]
Message-ID: <1520848387.27000.0.camel@mtkswgap22> (raw)
In-Reply-To: <cea7b0bf-fcd9-6405-c437-d3251e7bb4bf@gmail.com>

On Mon, 2018-03-12 at 10:40 +0100, Matthias Brugger wrote:
> 
> On 02/23/2018 11:16 AM, sean.wang@mediatek.com wrote:
> > From: Sean Wang <sean.wang@mediatek.com>
> > 
> > add BTIF, HSDMA and SPI-NOR device nodes and enable it on relevant boards
> 
> AFAIK hsdma controller is not upstream yet.
> Please resubmit when at least the binding got merged.
> 

Sure, I will drop the node for HSDMA in the next version.

> Thanks,
> Matthias
> 
> > 
> > Signed-off-by: Sean Wang <sean.wang@mediatek.com>
> > ---
> >  arch/arm/boot/dts/mt7623.dtsi                 | 36 ++++++++++++++++++++++++++-
> >  arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts |  6 ++++-
> >  2 files changed, 40 insertions(+), 2 deletions(-)
> > 
> > diff --git a/arch/arm/boot/dts/mt7623.dtsi b/arch/arm/boot/dts/mt7623.dtsi
> > index 91317a1..da56c54 100644
> > --- a/arch/arm/boot/dts/mt7623.dtsi
> > +++ b/arch/arm/boot/dts/mt7623.dtsi
> > @@ -1,5 +1,5 @@
> >  /*
> > - * Copyright (c) 2017 MediaTek Inc.
> > + * Copyright (c) 2017-2018 MediaTek Inc.
> >   * Author: John Crispin <john@phrozen.org>
> >   *	   Sean Wang <sean.wang@mediatek.com>
> >   *
> > @@ -483,6 +483,18 @@
> >  		nvmem-cell-names = "calibration-data";
> >  	};
> >  
> > +	btif: serial@1100c000 {
> > +		compatible = "mediatek,mt7623-btif",
> > +			     "mediatek,mtk-btif";
> > +		reg = <0 0x1100c000 0 0x1000>;
> > +		interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_LOW>;
> > +		clocks = <&pericfg CLK_PERI_BTIF>;
> > +		clock-names = "main";
> > +		reg-shift = <2>;
> > +		reg-io-width = <4>;
> > +		status = "disabled";
> > +	};
> > +
> >  	nandc: nfi@1100d000 {
> >  		compatible = "mediatek,mt7623-nfc",
> >  			     "mediatek,mt2701-nfc";
> > @@ -508,6 +520,18 @@
> >  		status = "disabled";
> >  	};
> >  
> > +	nor_flash: spi@11014000 {
> > +		compatible = "mediatek,mt7623-nor",
> > +			     "mediatek,mt8173-nor";
> > +		reg = <0 0x11014000 0 0x1000>;
> > +		clocks = <&pericfg CLK_PERI_FLASH>,
> > +			 <&topckgen CLK_TOP_FLASH_SEL>;
> > +		clock-names = "spi", "sf";
> > +		#address-cells = <1>;
> > +		#size-cells = <0>;
> > +		status = "disabled";
> > +	};
> > +
> >  	spi1: spi@11016000 {
> >  		compatible = "mediatek,mt7623-spi",
> >  			     "mediatek,mt2701-spi";
> > @@ -861,6 +885,16 @@
> >  		#reset-cells = <1>;
> >  	};
> >  
> > +	hsdma: dma-controller@1b007000 {
> > +		compatible = "mediatek,mt7623-hsdma";
> > +		reg = <0 0x1b007000 0 0x1000>;
> > +		interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_LOW>;
> > +		clocks = <&ethsys CLK_ETHSYS_HSDMA>;
> > +		clock-names = "hsdma";
> > +		power-domains = <&scpsys MT2701_POWER_DOMAIN_ETH>;
> > +		#dma-cells = <1>;
> > +	};
> > +
> >  	eth: ethernet@1b100000 {
> >  		compatible = "mediatek,mt7623-eth",
> >  			     "mediatek,mt2701-eth",
> > diff --git a/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts b/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts
> > index 3efecc5..ec11e14 100644
> > --- a/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts
> > +++ b/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts
> > @@ -1,5 +1,5 @@
> >  /*
> > - * Copyright 2017 Sean Wang <sean.wang@mediatek.com>
> > + * Copyright 2017-2018 Sean Wang <sean.wang@mediatek.com>
> >   *
> >   * SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> >   */
> > @@ -86,6 +86,10 @@
> >  	};
> >  };
> >  
> > +&btif {
> > +	status = "okay";
> > +};
> > +
> >  &cir {
> >  	pinctrl-names = "default";
> >  	pinctrl-0 = <&cir_pins_a>;
> > 

WARNING: multiple messages have this Message-ID (diff)
From: Sean Wang <sean.wang@mediatek.com>
To: Matthias Brugger <matthias.bgg@gmail.com>
Cc: robh+dt@kernel.org, mark.rutland@arm.com,
	devicetree@vger.kernel.org, linux-mediatek@lists.infradead.org,
	linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org
Subject: Re: [PATCH v1 05/19] arm: dts: mt7623: add BTIF, HSDMA and SPI-NOR device nodes
Date: Mon, 12 Mar 2018 17:53:07 +0800	[thread overview]
Message-ID: <1520848387.27000.0.camel@mtkswgap22> (raw)
In-Reply-To: <cea7b0bf-fcd9-6405-c437-d3251e7bb4bf@gmail.com>

On Mon, 2018-03-12 at 10:40 +0100, Matthias Brugger wrote:
> 
> On 02/23/2018 11:16 AM, sean.wang@mediatek.com wrote:
> > From: Sean Wang <sean.wang@mediatek.com>
> > 
> > add BTIF, HSDMA and SPI-NOR device nodes and enable it on relevant boards
> 
> AFAIK hsdma controller is not upstream yet.
> Please resubmit when at least the binding got merged.
> 

Sure, I will drop the node for HSDMA in the next version.

> Thanks,
> Matthias
> 
> > 
> > Signed-off-by: Sean Wang <sean.wang@mediatek.com>
> > ---
> >  arch/arm/boot/dts/mt7623.dtsi                 | 36 ++++++++++++++++++++++++++-
> >  arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts |  6 ++++-
> >  2 files changed, 40 insertions(+), 2 deletions(-)
> > 
> > diff --git a/arch/arm/boot/dts/mt7623.dtsi b/arch/arm/boot/dts/mt7623.dtsi
> > index 91317a1..da56c54 100644
> > --- a/arch/arm/boot/dts/mt7623.dtsi
> > +++ b/arch/arm/boot/dts/mt7623.dtsi
> > @@ -1,5 +1,5 @@
> >  /*
> > - * Copyright (c) 2017 MediaTek Inc.
> > + * Copyright (c) 2017-2018 MediaTek Inc.
> >   * Author: John Crispin <john@phrozen.org>
> >   *	   Sean Wang <sean.wang@mediatek.com>
> >   *
> > @@ -483,6 +483,18 @@
> >  		nvmem-cell-names = "calibration-data";
> >  	};
> >  
> > +	btif: serial@1100c000 {
> > +		compatible = "mediatek,mt7623-btif",
> > +			     "mediatek,mtk-btif";
> > +		reg = <0 0x1100c000 0 0x1000>;
> > +		interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_LOW>;
> > +		clocks = <&pericfg CLK_PERI_BTIF>;
> > +		clock-names = "main";
> > +		reg-shift = <2>;
> > +		reg-io-width = <4>;
> > +		status = "disabled";
> > +	};
> > +
> >  	nandc: nfi@1100d000 {
> >  		compatible = "mediatek,mt7623-nfc",
> >  			     "mediatek,mt2701-nfc";
> > @@ -508,6 +520,18 @@
> >  		status = "disabled";
> >  	};
> >  
> > +	nor_flash: spi@11014000 {
> > +		compatible = "mediatek,mt7623-nor",
> > +			     "mediatek,mt8173-nor";
> > +		reg = <0 0x11014000 0 0x1000>;
> > +		clocks = <&pericfg CLK_PERI_FLASH>,
> > +			 <&topckgen CLK_TOP_FLASH_SEL>;
> > +		clock-names = "spi", "sf";
> > +		#address-cells = <1>;
> > +		#size-cells = <0>;
> > +		status = "disabled";
> > +	};
> > +
> >  	spi1: spi@11016000 {
> >  		compatible = "mediatek,mt7623-spi",
> >  			     "mediatek,mt2701-spi";
> > @@ -861,6 +885,16 @@
> >  		#reset-cells = <1>;
> >  	};
> >  
> > +	hsdma: dma-controller@1b007000 {
> > +		compatible = "mediatek,mt7623-hsdma";
> > +		reg = <0 0x1b007000 0 0x1000>;
> > +		interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_LOW>;
> > +		clocks = <&ethsys CLK_ETHSYS_HSDMA>;
> > +		clock-names = "hsdma";
> > +		power-domains = <&scpsys MT2701_POWER_DOMAIN_ETH>;
> > +		#dma-cells = <1>;
> > +	};
> > +
> >  	eth: ethernet@1b100000 {
> >  		compatible = "mediatek,mt7623-eth",
> >  			     "mediatek,mt2701-eth",
> > diff --git a/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts b/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts
> > index 3efecc5..ec11e14 100644
> > --- a/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts
> > +++ b/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts
> > @@ -1,5 +1,5 @@
> >  /*
> > - * Copyright 2017 Sean Wang <sean.wang@mediatek.com>
> > + * Copyright 2017-2018 Sean Wang <sean.wang@mediatek.com>
> >   *
> >   * SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> >   */
> > @@ -86,6 +86,10 @@
> >  	};
> >  };
> >  
> > +&btif {
> > +	status = "okay";
> > +};
> > +
> >  &cir {
> >  	pinctrl-names = "default";
> >  	pinctrl-0 = <&cir_pins_a>;
> > 

WARNING: multiple messages have this Message-ID (diff)
From: sean.wang@mediatek.com (Sean Wang)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v1 05/19] arm: dts: mt7623: add BTIF, HSDMA and SPI-NOR device nodes
Date: Mon, 12 Mar 2018 17:53:07 +0800	[thread overview]
Message-ID: <1520848387.27000.0.camel@mtkswgap22> (raw)
In-Reply-To: <cea7b0bf-fcd9-6405-c437-d3251e7bb4bf@gmail.com>

On Mon, 2018-03-12 at 10:40 +0100, Matthias Brugger wrote:
> 
> On 02/23/2018 11:16 AM, sean.wang at mediatek.com wrote:
> > From: Sean Wang <sean.wang@mediatek.com>
> > 
> > add BTIF, HSDMA and SPI-NOR device nodes and enable it on relevant boards
> 
> AFAIK hsdma controller is not upstream yet.
> Please resubmit when at least the binding got merged.
> 

Sure, I will drop the node for HSDMA in the next version.

> Thanks,
> Matthias
> 
> > 
> > Signed-off-by: Sean Wang <sean.wang@mediatek.com>
> > ---
> >  arch/arm/boot/dts/mt7623.dtsi                 | 36 ++++++++++++++++++++++++++-
> >  arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts |  6 ++++-
> >  2 files changed, 40 insertions(+), 2 deletions(-)
> > 
> > diff --git a/arch/arm/boot/dts/mt7623.dtsi b/arch/arm/boot/dts/mt7623.dtsi
> > index 91317a1..da56c54 100644
> > --- a/arch/arm/boot/dts/mt7623.dtsi
> > +++ b/arch/arm/boot/dts/mt7623.dtsi
> > @@ -1,5 +1,5 @@
> >  /*
> > - * Copyright (c) 2017 MediaTek Inc.
> > + * Copyright (c) 2017-2018 MediaTek Inc.
> >   * Author: John Crispin <john@phrozen.org>
> >   *	   Sean Wang <sean.wang@mediatek.com>
> >   *
> > @@ -483,6 +483,18 @@
> >  		nvmem-cell-names = "calibration-data";
> >  	};
> >  
> > +	btif: serial at 1100c000 {
> > +		compatible = "mediatek,mt7623-btif",
> > +			     "mediatek,mtk-btif";
> > +		reg = <0 0x1100c000 0 0x1000>;
> > +		interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_LOW>;
> > +		clocks = <&pericfg CLK_PERI_BTIF>;
> > +		clock-names = "main";
> > +		reg-shift = <2>;
> > +		reg-io-width = <4>;
> > +		status = "disabled";
> > +	};
> > +
> >  	nandc: nfi at 1100d000 {
> >  		compatible = "mediatek,mt7623-nfc",
> >  			     "mediatek,mt2701-nfc";
> > @@ -508,6 +520,18 @@
> >  		status = "disabled";
> >  	};
> >  
> > +	nor_flash: spi at 11014000 {
> > +		compatible = "mediatek,mt7623-nor",
> > +			     "mediatek,mt8173-nor";
> > +		reg = <0 0x11014000 0 0x1000>;
> > +		clocks = <&pericfg CLK_PERI_FLASH>,
> > +			 <&topckgen CLK_TOP_FLASH_SEL>;
> > +		clock-names = "spi", "sf";
> > +		#address-cells = <1>;
> > +		#size-cells = <0>;
> > +		status = "disabled";
> > +	};
> > +
> >  	spi1: spi at 11016000 {
> >  		compatible = "mediatek,mt7623-spi",
> >  			     "mediatek,mt2701-spi";
> > @@ -861,6 +885,16 @@
> >  		#reset-cells = <1>;
> >  	};
> >  
> > +	hsdma: dma-controller at 1b007000 {
> > +		compatible = "mediatek,mt7623-hsdma";
> > +		reg = <0 0x1b007000 0 0x1000>;
> > +		interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_LOW>;
> > +		clocks = <&ethsys CLK_ETHSYS_HSDMA>;
> > +		clock-names = "hsdma";
> > +		power-domains = <&scpsys MT2701_POWER_DOMAIN_ETH>;
> > +		#dma-cells = <1>;
> > +	};
> > +
> >  	eth: ethernet at 1b100000 {
> >  		compatible = "mediatek,mt7623-eth",
> >  			     "mediatek,mt2701-eth",
> > diff --git a/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts b/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts
> > index 3efecc5..ec11e14 100644
> > --- a/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts
> > +++ b/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts
> > @@ -1,5 +1,5 @@
> >  /*
> > - * Copyright 2017 Sean Wang <sean.wang@mediatek.com>
> > + * Copyright 2017-2018 Sean Wang <sean.wang@mediatek.com>
> >   *
> >   * SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> >   */
> > @@ -86,6 +86,10 @@
> >  	};
> >  };
> >  
> > +&btif {
> > +	status = "okay";
> > +};
> > +
> >  &cir {
> >  	pinctrl-names = "default";
> >  	pinctrl-0 = <&cir_pins_a>;
> > 

  reply	other threads:[~2018-03-12  9:53 UTC|newest]

Thread overview: 129+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-02-23 10:16 [PATCH v1 00/19] refactor dts and add support for more boards sean.wang
2018-02-23 10:16 ` sean.wang at mediatek.com
2018-02-23 10:16 ` sean.wang
     [not found] ` <cover.1519378871.git.sean.wang-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>
2018-02-23 10:16   ` [PATCH v1 01/19] dt-bindings: pinctrl: mediatek: use - instead of _ in examples sean.wang-NuS5LvNUpcJWk0Htik3J/w
2018-02-23 10:16     ` sean.wang at mediatek.com
2018-02-23 10:16     ` sean.wang
2018-03-02  7:43     ` Linus Walleij
2018-03-02  7:43       ` Linus Walleij
2018-02-23 10:16   ` [PATCH v1 03/19] dt-bindings: pinctrl: mediatek: add bindings for I2C2 and SPI2 on MT7623 sean.wang-NuS5LvNUpcJWk0Htik3J/w
2018-02-23 10:16     ` sean.wang at mediatek.com
2018-02-23 10:16     ` sean.wang
2018-03-02  7:44     ` Linus Walleij
2018-03-02  7:44       ` Linus Walleij
2018-02-23 10:16 ` [PATCH v1 02/19] dt-bindings: cpufreq: mediatek: use - instead of _ in examples sean.wang
2018-02-23 10:16   ` sean.wang at mediatek.com
2018-02-23 10:16   ` sean.wang-NuS5LvNUpcJWk0Htik3J/w
2018-02-26  4:13   ` Viresh Kumar
2018-02-26  4:13     ` Viresh Kumar
2018-03-19  2:51     ` Sean Wang
2018-03-19  2:51       ` Sean Wang
2018-03-19  2:51       ` Sean Wang
2018-03-19 10:35       ` Matthias Brugger
2018-03-19 10:35         ` Matthias Brugger
2018-03-02 15:53   ` Rob Herring
2018-03-02 15:53     ` Rob Herring
2018-02-23 10:16 ` [PATCH v1 04/19] dt-bindings: arm: mediatek: add support for more mt7623 reference boards sean.wang
2018-02-23 10:16   ` sean.wang at mediatek.com
2018-02-23 10:16   ` sean.wang
2018-03-02 16:00   ` Rob Herring
2018-03-02 16:00     ` Rob Herring
2018-03-12 11:03     ` Matthias Brugger
2018-03-12 11:03       ` Matthias Brugger
2018-02-23 10:16 ` [PATCH v1 05/19] arm: dts: mt7623: add BTIF, HSDMA and SPI-NOR device nodes sean.wang
2018-02-23 10:16   ` sean.wang at mediatek.com
2018-02-23 10:16   ` sean.wang
2018-03-12  9:40   ` Matthias Brugger
2018-03-12  9:40     ` Matthias Brugger
2018-03-12  9:53     ` Sean Wang [this message]
2018-03-12  9:53       ` Sean Wang
2018-03-12  9:53       ` Sean Wang
2018-02-23 10:16 ` [PATCH v1 06/19] arm: dts: mt7623: fix USB initialization fails on bananapi-r2 sean.wang
2018-02-23 10:16   ` sean.wang at mediatek.com
2018-02-23 10:16   ` sean.wang-NuS5LvNUpcJWk0Htik3J/w
2018-03-12 11:03   ` Matthias Brugger
2018-03-12 11:03     ` Matthias Brugger
2018-02-23 10:16 ` [PATCH v1 07/19] arm: dts: mt7623: fix the regulators mmc should use " sean.wang
2018-02-23 10:16   ` sean.wang at mediatek.com
2018-02-23 10:16   ` sean.wang
2018-03-18 23:49   ` Matthias Brugger
2018-03-18 23:49     ` Matthias Brugger
2018-02-23 10:16 ` [PATCH v1 08/19] arm: dts: mt7623: enable three available UARTs " sean.wang
2018-02-23 10:16   ` sean.wang at mediatek.com
2018-02-23 10:16   ` sean.wang
2018-03-18 23:49   ` Matthias Brugger
2018-03-18 23:49     ` Matthias Brugger
2018-02-23 10:16 ` [PATCH v1 09/19] arm: dts: mt7623: add related clock properties to cpu[1-3] nodes sean.wang
2018-02-23 10:16   ` sean.wang at mediatek.com
2018-02-23 10:16   ` sean.wang
2018-02-26  4:13   ` Viresh Kumar
2018-02-26  4:13     ` Viresh Kumar
2018-03-18 23:49   ` Matthias Brugger
2018-03-18 23:49     ` Matthias Brugger
2018-02-23 10:16 ` [PATCH v1 10/19] arm: dts: mt7623: remove useless property pinctrl-names at node switch@0 sean.wang
2018-02-23 10:16   ` sean.wang at mediatek.com
2018-02-23 10:16   ` sean.wang
2018-03-18 23:50   ` Matthias Brugger
2018-03-18 23:50     ` Matthias Brugger
2018-02-23 10:16 ` [PATCH v1 11/19] arm: dts: mt7623: use - instead of _ in DT node name sean.wang
2018-02-23 10:16   ` sean.wang at mediatek.com
2018-02-23 10:16   ` sean.wang
2018-03-18 23:50   ` Matthias Brugger
2018-03-18 23:50     ` Matthias Brugger
2018-02-23 10:16 ` [PATCH v1 12/19] arm: dts: mt7623: fix all Warnings (unit_address_vs_reg) sean.wang
2018-02-23 10:16   ` sean.wang at mediatek.com
2018-02-23 10:16   ` sean.wang
2018-03-18 21:54   ` Matthias Brugger
2018-03-18 21:54     ` Matthias Brugger
2018-02-23 10:16 ` [PATCH v1 13/19] arm: dts: mt7623: move node mt6323 leds to mt6323.dtsi sean.wang
2018-02-23 10:16   ` sean.wang at mediatek.com
2018-02-23 10:16   ` sean.wang
2018-03-02 15:40   ` Rob Herring
2018-03-02 15:40     ` Rob Herring
2018-03-02 22:46     ` Sean Wang
2018-03-02 22:46       ` Sean Wang
2018-03-02 22:46       ` Sean Wang
2018-03-18 23:46       ` Matthias Brugger
2018-03-18 23:46         ` Matthias Brugger
2018-03-18 22:01   ` Matthias Brugger
2018-03-18 22:01     ` Matthias Brugger
2018-02-23 10:16 ` [PATCH v1 14/19] arm: dts: mt7623: extend common file to unify all boards with MT7623 SoCs sean.wang
2018-02-23 10:16   ` sean.wang at mediatek.com
2018-02-23 10:16   ` sean.wang
2018-02-23 10:16 ` [PATCH v1 15/19] arm: dts: mt7623: add SPI[1,2], I2C2 and sound related nodes to reference board sean.wang
2018-02-23 10:16   ` [PATCH v1 15/19] arm: dts: mt7623: add SPI[1, 2], " sean.wang at mediatek.com
2018-02-23 10:16   ` sean.wang
2018-02-23 10:16 ` [PATCH v1 16/19] arm: dts: mt7623: fixup available memory size on bananapi-r2 sean.wang
2018-02-23 10:16   ` sean.wang at mediatek.com
2018-02-23 10:16   ` sean.wang
2018-03-02 15:42   ` Rob Herring
2018-03-02 15:42     ` Rob Herring
2018-03-02 23:27     ` Sean Wang
2018-03-02 23:27       ` Sean Wang
2018-03-02 23:27       ` Sean Wang
2018-03-05 14:16       ` Rob Herring
2018-03-05 14:16         ` Rob Herring
2018-03-05 15:46         ` Sean Wang
2018-03-05 15:46           ` Sean Wang
2018-03-05 15:46           ` Sean Wang
2018-02-23 10:16 ` [PATCH v1 17/19] arm: dts: mt7623: add MT7623N reference board with eMMC sean.wang
2018-02-23 10:16   ` sean.wang at mediatek.com
2018-02-23 10:16   ` sean.wang
2018-02-23 10:16 ` [PATCH v1 18/19] arm: dts: mt7623: add MT7623A reference boards sean.wang
2018-02-23 10:16   ` sean.wang at mediatek.com
2018-02-23 10:16   ` sean.wang
2018-03-02 15:45   ` Rob Herring
2018-03-02 15:45     ` Rob Herring
2018-03-03  2:15     ` Sean Wang
2018-03-03  2:15       ` Sean Wang
2018-03-03  2:15       ` Sean Wang
2018-03-05 14:10       ` Rob Herring
2018-03-05 14:10         ` Rob Herring
2018-03-05 15:10         ` Sean Wang
2018-03-05 15:10           ` Sean Wang
2018-03-05 15:10           ` Sean Wang
2018-02-23 10:16 ` [PATCH v1 19/19] arm: dts: mediatek: converted to using SPDX identifiers sean.wang
2018-02-23 10:16   ` sean.wang at mediatek.com
2018-02-23 10:16   ` sean.wang-NuS5LvNUpcJWk0Htik3J/w
2018-03-02 15:52   ` Rob Herring
2018-03-02 15:52     ` Rob Herring

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1520848387.27000.0.camel@mtkswgap22 \
    --to=sean.wang@mediatek.com \
    --cc=devicetree@vger.kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mediatek@lists.infradead.org \
    --cc=mark.rutland@arm.com \
    --cc=matthias.bgg@gmail.com \
    --cc=robh+dt@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.