[PATCH 0/2] net/usb/ax88179_178a: Adjustments for ax88179_chk_eee()

[PATCH 0/2] net/usb/ax88179_178a: Adjustments for ax88179_chk_eee()

[SF Markus Elfring]

From: Markus Elfring <elfring@users.sourceforge.net>
Date: Sat, 10 Mar 2018 19:05:45 +0100

Two update suggestions were taken into account
from static source code analysis.

Markus Elfring (2):
  Use common code
  Delete three unnecessary variables

 drivers/net/usb/ax88179_178a.c | 45 +++++++++++++++---------------------------
 1 file changed, 16 insertions(+), 29 deletions(-)

-- 
2.16.2

[PATCH 0/2] net/usb/ax88179_178a: Adjustments for ax88179_chk_eee()

[SF Markus Elfring]

From: Markus Elfring <elfring@users.sourceforge.net>
Date: Sat, 10 Mar 2018 19:05:45 +0100

Two update suggestions were taken into account
from static source code analysis.

Markus Elfring (2):
  Use common code
  Delete three unnecessary variables

 drivers/net/usb/ax88179_178a.c | 45 +++++++++++++++---------------------------
 1 file changed, 16 insertions(+), 29 deletions(-)

-- 
2.16.2

[PATCH 1/2] net/usb/ax88179_178a: Use common code in ax88179_chk_eee()

[SF Markus Elfring]

From: Markus Elfring <elfring@users.sourceforge.net>
Date: Sat, 10 Mar 2018 18:22:43 +0100

Adjust a jump target so that a bit of common code can be better reused
at the end of this function.

This issue was detected by using the Coccinelle software.

Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
---
 drivers/net/usb/ax88179_178a.c | 34 +++++++++++-----------------------
 1 file changed, 11 insertions(+), 23 deletions(-)

diff --git a/drivers/net/usb/ax88179_178a.c b/drivers/net/usb/ax88179_178a.c
index f32261ecd215..e4b0baa98e9a 100644
--- a/drivers/net/usb/ax88179_178a.c
+++ b/drivers/net/usb/ax88179_178a.c
@@ -689,49 +689,37 @@ static int ax88179_chk_eee(struct usbnet *dev)
 		eee_cap = ax88179_phy_read_mmd_indirect(dev,
 							MDIO_PCS_EEE_ABLE,
 							MDIO_MMD_PCS);
-		if (eee_cap < 0) {
-			priv->eee_active = 0;
-			return false;
-		}
+		if (eee_cap < 0)
+			goto set_inactive;
 
 		cap = mmd_eee_cap_to_ethtool_sup_t(eee_cap);
-		if (!cap) {
-			priv->eee_active = 0;
-			return false;
-		}
+		if (!cap)
+			goto set_inactive;
 
 		eee_lp = ax88179_phy_read_mmd_indirect(dev,
 						       MDIO_AN_EEE_LPABLE,
 						       MDIO_MMD_AN);
-		if (eee_lp < 0) {
-			priv->eee_active = 0;
-			return false;
-		}
+		if (eee_lp < 0)
+			goto set_inactive;
 
 		eee_adv = ax88179_phy_read_mmd_indirect(dev,
 							MDIO_AN_EEE_ADV,
 							MDIO_MMD_AN);
-
-		if (eee_adv < 0) {
-			priv->eee_active = 0;
-			return false;
-		}
+		if (eee_adv < 0)
+			goto set_inactive;
 
 		adv = mmd_eee_adv_to_ethtool_adv_t(eee_adv);
 		lp = mmd_eee_adv_to_ethtool_adv_t(eee_lp);
 		supported = (ecmd.speed == SPEED_1000) ?
 			     SUPPORTED_1000baseT_Full :
 			     SUPPORTED_100baseT_Full;
-
-		if (!(lp & adv & supported)) {
-			priv->eee_active = 0;
-			return false;
-		}
+		if (!(lp & adv & supported))
+			goto set_inactive;
 
 		priv->eee_active = 1;
 		return true;
 	}
-
+set_inactive:
 	priv->eee_active = 0;
 	return false;
 }
-- 
2.16.2

[PATCH 1/2] net/usb/ax88179_178a: Use common code in ax88179_chk_eee()

[SF Markus Elfring]

From: Markus Elfring <elfring@users.sourceforge.net>
Date: Sat, 10 Mar 2018 18:22:43 +0100

Adjust a jump target so that a bit of common code can be better reused
at the end of this function.

This issue was detected by using the Coccinelle software.

Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
---
 drivers/net/usb/ax88179_178a.c | 34 +++++++++++-----------------------
 1 file changed, 11 insertions(+), 23 deletions(-)

diff --git a/drivers/net/usb/ax88179_178a.c b/drivers/net/usb/ax88179_178a.c
index f32261ecd215..e4b0baa98e9a 100644
--- a/drivers/net/usb/ax88179_178a.c
+++ b/drivers/net/usb/ax88179_178a.c
@@ -689,49 +689,37 @@ static int ax88179_chk_eee(struct usbnet *dev)
 		eee_cap = ax88179_phy_read_mmd_indirect(dev,
 							MDIO_PCS_EEE_ABLE,
 							MDIO_MMD_PCS);
-		if (eee_cap < 0) {
-			priv->eee_active = 0;
-			return false;
-		}
+		if (eee_cap < 0)
+			goto set_inactive;
 
 		cap = mmd_eee_cap_to_ethtool_sup_t(eee_cap);
-		if (!cap) {
-			priv->eee_active = 0;
-			return false;
-		}
+		if (!cap)
+			goto set_inactive;
 
 		eee_lp = ax88179_phy_read_mmd_indirect(dev,
 						       MDIO_AN_EEE_LPABLE,
 						       MDIO_MMD_AN);
-		if (eee_lp < 0) {
-			priv->eee_active = 0;
-			return false;
-		}
+		if (eee_lp < 0)
+			goto set_inactive;
 
 		eee_adv = ax88179_phy_read_mmd_indirect(dev,
 							MDIO_AN_EEE_ADV,
 							MDIO_MMD_AN);
-
-		if (eee_adv < 0) {
-			priv->eee_active = 0;
-			return false;
-		}
+		if (eee_adv < 0)
+			goto set_inactive;
 
 		adv = mmd_eee_adv_to_ethtool_adv_t(eee_adv);
 		lp = mmd_eee_adv_to_ethtool_adv_t(eee_lp);
 		supported = (ecmd.speed = SPEED_1000) ?
 			     SUPPORTED_1000baseT_Full :
 			     SUPPORTED_100baseT_Full;
-
-		if (!(lp & adv & supported)) {
-			priv->eee_active = 0;
-			return false;
-		}
+		if (!(lp & adv & supported))
+			goto set_inactive;
 
 		priv->eee_active = 1;
 		return true;
 	}
-
+set_inactive:
 	priv->eee_active = 0;
 	return false;
 }
-- 
2.16.2

[1/2] net/usb/ax88179_178a: Use common code in ax88179_chk_eee()

[SF Markus Elfring]

From: Markus Elfring <elfring@users.sourceforge.net>
Date: Sat, 10 Mar 2018 18:22:43 +0100

Adjust a jump target so that a bit of common code can be better reused
at the end of this function.

This issue was detected by using the Coccinelle software.

Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
---
 drivers/net/usb/ax88179_178a.c | 34 +++++++++++-----------------------
 1 file changed, 11 insertions(+), 23 deletions(-)

diff --git a/drivers/net/usb/ax88179_178a.c b/drivers/net/usb/ax88179_178a.c
index f32261ecd215..e4b0baa98e9a 100644
--- a/drivers/net/usb/ax88179_178a.c
+++ b/drivers/net/usb/ax88179_178a.c
@@ -689,49 +689,37 @@ static int ax88179_chk_eee(struct usbnet *dev)
 		eee_cap = ax88179_phy_read_mmd_indirect(dev,
 							MDIO_PCS_EEE_ABLE,
 							MDIO_MMD_PCS);
-		if (eee_cap < 0) {
-			priv->eee_active = 0;
-			return false;
-		}
+		if (eee_cap < 0)
+			goto set_inactive;
 
 		cap = mmd_eee_cap_to_ethtool_sup_t(eee_cap);
-		if (!cap) {
-			priv->eee_active = 0;
-			return false;
-		}
+		if (!cap)
+			goto set_inactive;
 
 		eee_lp = ax88179_phy_read_mmd_indirect(dev,
 						       MDIO_AN_EEE_LPABLE,
 						       MDIO_MMD_AN);
-		if (eee_lp < 0) {
-			priv->eee_active = 0;
-			return false;
-		}
+		if (eee_lp < 0)
+			goto set_inactive;
 
 		eee_adv = ax88179_phy_read_mmd_indirect(dev,
 							MDIO_AN_EEE_ADV,
 							MDIO_MMD_AN);
-
-		if (eee_adv < 0) {
-			priv->eee_active = 0;
-			return false;
-		}
+		if (eee_adv < 0)
+			goto set_inactive;
 
 		adv = mmd_eee_adv_to_ethtool_adv_t(eee_adv);
 		lp = mmd_eee_adv_to_ethtool_adv_t(eee_lp);
 		supported = (ecmd.speed == SPEED_1000) ?
 			     SUPPORTED_1000baseT_Full :
 			     SUPPORTED_100baseT_Full;
-
-		if (!(lp & adv & supported)) {
-			priv->eee_active = 0;
-			return false;
-		}
+		if (!(lp & adv & supported))
+			goto set_inactive;
 
 		priv->eee_active = 1;
 		return true;
 	}
-
+set_inactive:
 	priv->eee_active = 0;
 	return false;
 }

[PATCH 2/2] net/usb/ax88179_178a: Delete three unnecessary variables in ax88179_chk_eee()

[SF Markus Elfring]

From: Markus Elfring <elfring@users.sourceforge.net>
Date: Sat, 10 Mar 2018 18:53:28 +0100

Use three values directly for a condition check without assigning them
to intermediate variables.

Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
---
 drivers/net/usb/ax88179_178a.c | 13 ++++++-------
 1 file changed, 6 insertions(+), 7 deletions(-)

diff --git a/drivers/net/usb/ax88179_178a.c b/drivers/net/usb/ax88179_178a.c
index e4b0baa98e9a..3e83be232504 100644
--- a/drivers/net/usb/ax88179_178a.c
+++ b/drivers/net/usb/ax88179_178a.c
@@ -684,7 +684,7 @@ static int ax88179_chk_eee(struct usbnet *dev)
 
 	if (ecmd.duplex & DUPLEX_FULL) {
 		int eee_lp, eee_cap, eee_adv;
-		u32 lp, cap, adv, supported = 0;
+		u32 cap;
 
 		eee_cap = ax88179_phy_read_mmd_indirect(dev,
 							MDIO_PCS_EEE_ABLE,
@@ -708,12 +708,11 @@ static int ax88179_chk_eee(struct usbnet *dev)
 		if (eee_adv < 0)
 			goto set_inactive;
 
-		adv = mmd_eee_adv_to_ethtool_adv_t(eee_adv);
-		lp = mmd_eee_adv_to_ethtool_adv_t(eee_lp);
-		supported = (ecmd.speed == SPEED_1000) ?
-			     SUPPORTED_1000baseT_Full :
-			     SUPPORTED_100baseT_Full;
-		if (!(lp & adv & supported))
+		if (!(mmd_eee_adv_to_ethtool_adv_t(eee_lp) &
+		      mmd_eee_adv_to_ethtool_adv_t(eee_adv) &
+		      ((ecmd.speed == SPEED_1000)
+		       ? SUPPORTED_1000baseT_Full
+		       : SUPPORTED_100baseT_Full)))
 			goto set_inactive;
 
 		priv->eee_active = 1;
-- 
2.16.2

[PATCH 2/2] net/usb/ax88179_178a: Delete three unnecessary variables in ax88179_chk_eee()

[SF Markus Elfring]

From: Markus Elfring <elfring@users.sourceforge.net>
Date: Sat, 10 Mar 2018 18:53:28 +0100

Use three values directly for a condition check without assigning them
to intermediate variables.

Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
---
 drivers/net/usb/ax88179_178a.c | 13 ++++++-------
 1 file changed, 6 insertions(+), 7 deletions(-)

diff --git a/drivers/net/usb/ax88179_178a.c b/drivers/net/usb/ax88179_178a.c
index e4b0baa98e9a..3e83be232504 100644
--- a/drivers/net/usb/ax88179_178a.c
+++ b/drivers/net/usb/ax88179_178a.c
@@ -684,7 +684,7 @@ static int ax88179_chk_eee(struct usbnet *dev)
 
 	if (ecmd.duplex & DUPLEX_FULL) {
 		int eee_lp, eee_cap, eee_adv;
-		u32 lp, cap, adv, supported = 0;
+		u32 cap;
 
 		eee_cap = ax88179_phy_read_mmd_indirect(dev,
 							MDIO_PCS_EEE_ABLE,
@@ -708,12 +708,11 @@ static int ax88179_chk_eee(struct usbnet *dev)
 		if (eee_adv < 0)
 			goto set_inactive;
 
-		adv = mmd_eee_adv_to_ethtool_adv_t(eee_adv);
-		lp = mmd_eee_adv_to_ethtool_adv_t(eee_lp);
-		supported = (ecmd.speed = SPEED_1000) ?
-			     SUPPORTED_1000baseT_Full :
-			     SUPPORTED_100baseT_Full;
-		if (!(lp & adv & supported))
+		if (!(mmd_eee_adv_to_ethtool_adv_t(eee_lp) &
+		      mmd_eee_adv_to_ethtool_adv_t(eee_adv) &
+		      ((ecmd.speed = SPEED_1000)
+		       ? SUPPORTED_1000baseT_Full
+		       : SUPPORTED_100baseT_Full)))
 			goto set_inactive;
 
 		priv->eee_active = 1;
-- 
2.16.2

[2/2] net/usb/ax88179_178a: Delete three unnecessary variables in ax88179_chk_eee()

[SF Markus Elfring]

From: Markus Elfring <elfring@users.sourceforge.net>
Date: Sat, 10 Mar 2018 18:53:28 +0100

Use three values directly for a condition check without assigning them
to intermediate variables.

Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
---
 drivers/net/usb/ax88179_178a.c | 13 ++++++-------
 1 file changed, 6 insertions(+), 7 deletions(-)

diff --git a/drivers/net/usb/ax88179_178a.c b/drivers/net/usb/ax88179_178a.c
index e4b0baa98e9a..3e83be232504 100644
--- a/drivers/net/usb/ax88179_178a.c
+++ b/drivers/net/usb/ax88179_178a.c
@@ -684,7 +684,7 @@ static int ax88179_chk_eee(struct usbnet *dev)
 
 	if (ecmd.duplex & DUPLEX_FULL) {
 		int eee_lp, eee_cap, eee_adv;
-		u32 lp, cap, adv, supported = 0;
+		u32 cap;
 
 		eee_cap = ax88179_phy_read_mmd_indirect(dev,
 							MDIO_PCS_EEE_ABLE,
@@ -708,12 +708,11 @@ static int ax88179_chk_eee(struct usbnet *dev)
 		if (eee_adv < 0)
 			goto set_inactive;
 
-		adv = mmd_eee_adv_to_ethtool_adv_t(eee_adv);
-		lp = mmd_eee_adv_to_ethtool_adv_t(eee_lp);
-		supported = (ecmd.speed == SPEED_1000) ?
-			     SUPPORTED_1000baseT_Full :
-			     SUPPORTED_100baseT_Full;
-		if (!(lp & adv & supported))
+		if (!(mmd_eee_adv_to_ethtool_adv_t(eee_lp) &
+		      mmd_eee_adv_to_ethtool_adv_t(eee_adv) &
+		      ((ecmd.speed == SPEED_1000)
+		       ? SUPPORTED_1000baseT_Full
+		       : SUPPORTED_100baseT_Full)))
 			goto set_inactive;
 
 		priv->eee_active = 1;

Re: [PATCH 1/2] net/usb/ax88179_178a: Use common code in ax88179_chk_eee()

[Joe Perches]

On Sat, 2018-03-10 at 19:24 +0100, SF Markus Elfring wrote:
> From: Markus Elfring <elfring@users.sourceforge.net>
> Date: Sat, 10 Mar 2018 18:22:43 +0100
> 
> Adjust a jump target so that a bit of common code can be better reused
> at the end of this function.

Please stop mindlessly sending patching Markus.

How about looking at the code being modified and
thinking about what it does?

Try unindenting the block by reversing the first test
and using the same goto set_inactive.

Look at the last & tests
+		if (!(lp & adv & supported))
and see if it should use && or be more simple to read
by using
	if (!condition || !

> ---
>  drivers/net/usb/ax88179_178a.c | 34 +++++++++++-----------------------
>  1 file changed, 11 insertions(+), 23 deletions(-)
> 
> diff --git a/drivers/net/usb/ax88179_178a.c b/drivers/net/usb/ax88179_178a.c
> index f32261ecd215..e4b0baa98e9a 100644
> --- a/drivers/net/usb/ax88179_178a.c
> +++ b/drivers/net/usb/ax88179_178a.c
> @@ -689,49 +689,37 @@ static int ax88179_chk_eee(struct usbnet *dev)
>  		eee_cap = ax88179_phy_read_mmd_indirect(dev,
>  							MDIO_PCS_EEE_ABLE,
>  							MDIO_MMD_PCS);
> -		if (eee_cap < 0) {
> -			priv->eee_active = 0;
> -			return false;
> -		}
> +		if (eee_cap < 0)
> +			goto set_inactive;
>  
>  		cap = mmd_eee_cap_to_ethtool_sup_t(eee_cap);
> -		if (!cap) {
> -			priv->eee_active = 0;
> -			return false;
> -		}
> +		if (!cap)
> +			goto set_inactive;
>  
>  		eee_lp = ax88179_phy_read_mmd_indirect(dev,
>  						       MDIO_AN_EEE_LPABLE,
>  						       MDIO_MMD_AN);
> -		if (eee_lp < 0) {
> -			priv->eee_active = 0;
> -			return false;
> -		}
> +		if (eee_lp < 0)
> +			goto set_inactive;
>  
>  		eee_adv = ax88179_phy_read_mmd_indirect(dev,
>  							MDIO_AN_EEE_ADV,
>  							MDIO_MMD_AN);
> -
> -		if (eee_adv < 0) {
> -			priv->eee_active = 0;
> -			return false;
> -		}
> +		if (eee_adv < 0)
> +			goto set_inactive;
>  
>  		adv = mmd_eee_adv_to_ethtool_adv_t(eee_adv);
>  		lp = mmd_eee_adv_to_ethtool_adv_t(eee_lp);
>  		supported = (ecmd.speed == SPEED_1000) ?
>  			     SUPPORTED_1000baseT_Full :
>  			     SUPPORTED_100baseT_Full;
> -
> -		if (!(lp & adv & supported)) {
> -			priv->eee_active = 0;
> -			return false;
> -		}
> +		if (!(lp & adv & supported))
> +			goto set_inactive;
>  
>  		priv->eee_active = 1;
>  		return true;
>  	}
> -
> +set_inactive:
>  	priv->eee_active = 0;
>  	return false;
>  }

Re: [PATCH 1/2] net/usb/ax88179_178a: Use common code in ax88179_chk_eee()

[Joe Perches]

On Sat, 2018-03-10 at 19:24 +0100, SF Markus Elfring wrote:
> From: Markus Elfring <elfring@users.sourceforge.net>
> Date: Sat, 10 Mar 2018 18:22:43 +0100
> 
> Adjust a jump target so that a bit of common code can be better reused
> at the end of this function.

Please stop mindlessly sending patching Markus.

How about looking at the code being modified and
thinking about what it does?

Try unindenting the block by reversing the first test
and using the same goto set_inactive.

Look at the last & tests
+		if (!(lp & adv & supported))
and see if it should use && or be more simple to read
by using
	if (!condition || !

> ---
>  drivers/net/usb/ax88179_178a.c | 34 +++++++++++-----------------------
>  1 file changed, 11 insertions(+), 23 deletions(-)
> 
> diff --git a/drivers/net/usb/ax88179_178a.c b/drivers/net/usb/ax88179_178a.c
> index f32261ecd215..e4b0baa98e9a 100644
> --- a/drivers/net/usb/ax88179_178a.c
> +++ b/drivers/net/usb/ax88179_178a.c
> @@ -689,49 +689,37 @@ static int ax88179_chk_eee(struct usbnet *dev)
>  		eee_cap = ax88179_phy_read_mmd_indirect(dev,
>  							MDIO_PCS_EEE_ABLE,
>  							MDIO_MMD_PCS);
> -		if (eee_cap < 0) {
> -			priv->eee_active = 0;
> -			return false;
> -		}
> +		if (eee_cap < 0)
> +			goto set_inactive;
>  
>  		cap = mmd_eee_cap_to_ethtool_sup_t(eee_cap);
> -		if (!cap) {
> -			priv->eee_active = 0;
> -			return false;
> -		}
> +		if (!cap)
> +			goto set_inactive;
>  
>  		eee_lp = ax88179_phy_read_mmd_indirect(dev,
>  						       MDIO_AN_EEE_LPABLE,
>  						       MDIO_MMD_AN);
> -		if (eee_lp < 0) {
> -			priv->eee_active = 0;
> -			return false;
> -		}
> +		if (eee_lp < 0)
> +			goto set_inactive;
>  
>  		eee_adv = ax88179_phy_read_mmd_indirect(dev,
>  							MDIO_AN_EEE_ADV,
>  							MDIO_MMD_AN);
> -
> -		if (eee_adv < 0) {
> -			priv->eee_active = 0;
> -			return false;
> -		}
> +		if (eee_adv < 0)
> +			goto set_inactive;
>  
>  		adv = mmd_eee_adv_to_ethtool_adv_t(eee_adv);
>  		lp = mmd_eee_adv_to_ethtool_adv_t(eee_lp);
>  		supported = (ecmd.speed = SPEED_1000) ?
>  			     SUPPORTED_1000baseT_Full :
>  			     SUPPORTED_100baseT_Full;
> -
> -		if (!(lp & adv & supported)) {
> -			priv->eee_active = 0;
> -			return false;
> -		}
> +		if (!(lp & adv & supported))
> +			goto set_inactive;
>  
>  		priv->eee_active = 1;
>  		return true;
>  	}
> -
> +set_inactive:
>  	priv->eee_active = 0;
>  	return false;
>  }

[1/2] net/usb/ax88179_178a: Use common code in ax88179_chk_eee()

[Joe Perches]

On Sat, 2018-03-10 at 19:24 +0100, SF Markus Elfring wrote:
> From: Markus Elfring <elfring@users.sourceforge.net>
> Date: Sat, 10 Mar 2018 18:22:43 +0100
> 
> Adjust a jump target so that a bit of common code can be better reused
> at the end of this function.

Please stop mindlessly sending patching Markus.

How about looking at the code being modified and
thinking about what it does?

Try unindenting the block by reversing the first test
and using the same goto set_inactive.

Look at the last & tests
+		if (!(lp & adv & supported))
and see if it should use && or be more simple to read
by using
	if (!condition || !

> ---
>  drivers/net/usb/ax88179_178a.c | 34 +++++++++++-----------------------
>  1 file changed, 11 insertions(+), 23 deletions(-)
> 
> diff --git a/drivers/net/usb/ax88179_178a.c b/drivers/net/usb/ax88179_178a.c
> index f32261ecd215..e4b0baa98e9a 100644
> --- a/drivers/net/usb/ax88179_178a.c
> +++ b/drivers/net/usb/ax88179_178a.c
> @@ -689,49 +689,37 @@ static int ax88179_chk_eee(struct usbnet *dev)
>  		eee_cap = ax88179_phy_read_mmd_indirect(dev,
>  							MDIO_PCS_EEE_ABLE,
>  							MDIO_MMD_PCS);
> -		if (eee_cap < 0) {
> -			priv->eee_active = 0;
> -			return false;
> -		}
> +		if (eee_cap < 0)
> +			goto set_inactive;
>  
>  		cap = mmd_eee_cap_to_ethtool_sup_t(eee_cap);
> -		if (!cap) {
> -			priv->eee_active = 0;
> -			return false;
> -		}
> +		if (!cap)
> +			goto set_inactive;
>  
>  		eee_lp = ax88179_phy_read_mmd_indirect(dev,
>  						       MDIO_AN_EEE_LPABLE,
>  						       MDIO_MMD_AN);
> -		if (eee_lp < 0) {
> -			priv->eee_active = 0;
> -			return false;
> -		}
> +		if (eee_lp < 0)
> +			goto set_inactive;
>  
>  		eee_adv = ax88179_phy_read_mmd_indirect(dev,
>  							MDIO_AN_EEE_ADV,
>  							MDIO_MMD_AN);
> -
> -		if (eee_adv < 0) {
> -			priv->eee_active = 0;
> -			return false;
> -		}
> +		if (eee_adv < 0)
> +			goto set_inactive;
>  
>  		adv = mmd_eee_adv_to_ethtool_adv_t(eee_adv);
>  		lp = mmd_eee_adv_to_ethtool_adv_t(eee_lp);
>  		supported = (ecmd.speed == SPEED_1000) ?
>  			     SUPPORTED_1000baseT_Full :
>  			     SUPPORTED_100baseT_Full;
> -
> -		if (!(lp & adv & supported)) {
> -			priv->eee_active = 0;
> -			return false;
> -		}
> +		if (!(lp & adv & supported))
> +			goto set_inactive;
>  
>  		priv->eee_active = 1;
>  		return true;
>  	}
> -
> +set_inactive:
>  	priv->eee_active = 0;
>  	return false;
>  }
---
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH 1/2] net/usb/ax88179_178a: Use common code in ax88179_chk_eee()

[Andy Shevchenko]

On Sat, Mar 10, 2018 at 8:41 PM, Joe Perches <joe@perches.com> wrote:
> On Sat, 2018-03-10 at 19:24 +0100, SF Markus Elfring wrote:
>> From: Markus Elfring <elfring@users.sourceforge.net>
>> Date: Sat, 10 Mar 2018 18:22:43 +0100
>>
>> Adjust a jump target so that a bit of common code can be better reused
>> at the end of this function.
>
> Please stop mindlessly sending patching Markus.
>
> How about looking at the code being modified and
> thinking about what it does?

You have a strong nerve, I gave up on him and would rather simple ban.

-- 
With Best Regards,
Andy Shevchenko

Re: [PATCH 1/2] net/usb/ax88179_178a: Use common code in ax88179_chk_eee()

[Andy Shevchenko]

On Sat, Mar 10, 2018 at 8:41 PM, Joe Perches <joe@perches.com> wrote:
> On Sat, 2018-03-10 at 19:24 +0100, SF Markus Elfring wrote:
>> From: Markus Elfring <elfring@users.sourceforge.net>
>> Date: Sat, 10 Mar 2018 18:22:43 +0100
>>
>> Adjust a jump target so that a bit of common code can be better reused
>> at the end of this function.
>
> Please stop mindlessly sending patching Markus.
>
> How about looking at the code being modified and
> thinking about what it does?

You have a strong nerve, I gave up on him and would rather simple ban.

-- 
With Best Regards,
Andy Shevchenko

[1/2] net/usb/ax88179_178a: Use common code in ax88179_chk_eee()

[Andy Shevchenko]

On Sat, Mar 10, 2018 at 8:41 PM, Joe Perches <joe@perches.com> wrote:
> On Sat, 2018-03-10 at 19:24 +0100, SF Markus Elfring wrote:
>> From: Markus Elfring <elfring@users.sourceforge.net>
>> Date: Sat, 10 Mar 2018 18:22:43 +0100
>>
>> Adjust a jump target so that a bit of common code can be better reused
>> at the end of this function.
>
> Please stop mindlessly sending patching Markus.
>
> How about looking at the code being modified and
> thinking about what it does?

You have a strong nerve, I gave up on him and would rather simple ban.

Re: [PATCH 0/2] net/usb/ax88179_178a: Adjustments for ax88179_chk_eee()

[Andrew Lunn]

On Sat, Mar 10, 2018 at 07:22:55PM +0100, SF Markus Elfring wrote:
> From: Markus Elfring <elfring@users.sourceforge.net>
> Date: Sat, 10 Mar 2018 19:05:45 +0100
> 
> Two update suggestions were taken into account
> from static source code analysis.

Hi Markus

How about re-writing this driver to use phylib. The whole of
ax88179_chk_eee() would then go away, since it is a duplication of
phy_init_eee().

	Andrew

Re: [PATCH 0/2] net/usb/ax88179_178a: Adjustments for ax88179_chk_eee()

[Andrew Lunn]

On Sat, Mar 10, 2018 at 07:22:55PM +0100, SF Markus Elfring wrote:
> From: Markus Elfring <elfring@users.sourceforge.net>
> Date: Sat, 10 Mar 2018 19:05:45 +0100
> 
> Two update suggestions were taken into account
> from static source code analysis.

Hi Markus

How about re-writing this driver to use phylib. The whole of
ax88179_chk_eee() would then go away, since it is a duplication of
phy_init_eee().

	Andrew

Re: [PATCH 2/2] net/usb/ax88179_178a: Delete three unnecessary variables in ax88179_chk_eee()

[Oliver Neukum]

Am Samstag, den 10.03.2018, 19:26 +0100 schrieb SF Markus Elfring:
> From: Markus Elfring <elfring@users.sourceforge.net>
> Date: Sat, 10 Mar 2018 18:53:28 +0100
> 
> Use three values directly for a condition check without assigning them
> to intermediate variables.

Hi,

what is the benefit of this? It looks like needless code churn to me.

	Regards
		Oliver

Re: [PATCH 2/2] net/usb/ax88179_178a: Delete three unnecessary variables in ax88179_chk_eee()

[Oliver Neukum]

Am Samstag, den 10.03.2018, 19:26 +0100 schrieb SF Markus Elfring:
> From: Markus Elfring <elfring@users.sourceforge.net>
> Date: Sat, 10 Mar 2018 18:53:28 +0100
> 
> Use three values directly for a condition check without assigning them
> to intermediate variables.

Hi,

what is the benefit of this? It looks like needless code churn to me.

	Regards
		Oliver

[2/2] net/usb/ax88179_178a: Delete three unnecessary variables in ax88179_chk_eee()

[Oliver Neukum]

Am Samstag, den 10.03.2018, 19:26 +0100 schrieb SF Markus Elfring:
> From: Markus Elfring <elfring@users.sourceforge.net>
> Date: Sat, 10 Mar 2018 18:53:28 +0100
> 
> Use three values directly for a condition check without assigning them
> to intermediate variables.

Hi,

what is the benefit of this? It looks like needless code churn to me.

	Regards
		Oliver
---
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [2/2] net/usb/ax88179_178a: Delete three unnecessary variables in ax88179_chk_eee()

[SF Markus Elfring]

>> Use three values directly for a condition check without assigning them
>> to intermediate variables.
> 
> Hi,
> 
> what is the benefit of this?

I proposed a small source code reduction.

Other software design directions might become more interesting for this use case.

Regards,
Markus

Re: [2/2] net/usb/ax88179_178a: Delete three unnecessary variables in ax88179_chk_eee()

[SF Markus Elfring]

>> Use three values directly for a condition check without assigning them
>> to intermediate variables.
> 
> Hi,
> 
> what is the benefit of this?

I proposed a small source code reduction.

Other software design directions might become more interesting for this use case.

Regards,
Markus

[2/2] net/usb/ax88179_178a: Delete three unnecessary variables in ax88179_chk_eee()

[SF Markus Elfring]

>> Use three values directly for a condition check without assigning them
>> to intermediate variables.
> 
> Hi,
> 
> what is the benefit of this?

I proposed a small source code reduction.

Other software design directions might become more interesting for this use case.

Regards,
Markus
---
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [2/2] net/usb/ax88179_178a: Delete three unnecessary variables in ax88179_chk_eee()

[Oliver Neukum]

Am Dienstag, den 13.03.2018, 08:24 +0100 schrieb SF Markus Elfring:
> > 
> > > 
> > > Use three values directly for a condition check without assigning them
> > > to intermediate variables.
> > 
> > Hi,
> > 
> > what is the benefit of this?
> 
> I proposed a small source code reduction.
> 
> Other software design directions might become more interesting for this use case.

Yes and doing so you killed three meaningful names that tell
us what these checks actually test for. That is not an improvement.

	Regards
		Oliver

Re: [2/2] net/usb/ax88179_178a: Delete three unnecessary variables in ax88179_chk_eee()

[Oliver Neukum]

Am Dienstag, den 13.03.2018, 08:24 +0100 schrieb SF Markus Elfring:
> > 
> > > 
> > > Use three values directly for a condition check without assigning them
> > > to intermediate variables.
> > 
> > Hi,
> > 
> > what is the benefit of this?
> 
> I proposed a small source code reduction.
> 
> Other software design directions might become more interesting for this use case.

Yes and doing so you killed three meaningful names that tell
us what these checks actually test for. That is not an improvement.

	Regards
		Oliver

[2/2] net/usb/ax88179_178a: Delete three unnecessary variables in ax88179_chk_eee()

[Oliver Neukum]

Am Dienstag, den 13.03.2018, 08:24 +0100 schrieb SF Markus Elfring:
> > 
> > > 
> > > Use three values directly for a condition check without assigning them
> > > to intermediate variables.
> > 
> > Hi,
> > 
> > what is the benefit of this?
> 
> I proposed a small source code reduction.
> 
> Other software design directions might become more interesting for this use case.

Yes and doing so you killed three meaningful names that tell
us what these checks actually test for. That is not an improvement.

	Regards
		Oliver
---
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html