* [Buildroot] [PATCH v2 1/4] package/rpi-firmware: bump version
@ 2018-03-15 22:37 Martin Bark
2018-03-15 22:37 ` [Buildroot] [PATCH v2 2/4] configs/raspberrypi*: bump kernel version Martin Bark
` (2 more replies)
0 siblings, 3 replies; 4+ messages in thread
From: Martin Bark @ 2018-03-15 22:37 UTC (permalink / raw)
To: buildroot
Signed-off-by: Martin Bark <martin@barkynet.com>
----
Changes v1 -> v2:
- none
---
package/rpi-firmware/rpi-firmware.hash | 2 +-
package/rpi-firmware/rpi-firmware.mk | 2 +-
2 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/package/rpi-firmware/rpi-firmware.hash b/package/rpi-firmware/rpi-firmware.hash
index 833a7fb..0e09ff5 100644
--- a/package/rpi-firmware/rpi-firmware.hash
+++ b/package/rpi-firmware/rpi-firmware.hash
@@ -1,2 +1,2 @@
# Locally computed
-sha256 0451e1a843bf02df81126a1625d9a15dfdf19dcb2f9e95b0613a63e59fd31ca8 rpi-firmware-2067241bc7cdf238fdeab7f5a3c22faa57dd5617.tar.gz
+sha256 8fe5ebe14cc900f67242cab0c1c9f8e29bd10369ccbdfc7d004c294a96bad975 rpi-firmware-086a8488de0f485e8879ac14ff505ff1d922eeed.tar.gz
diff --git a/package/rpi-firmware/rpi-firmware.mk b/package/rpi-firmware/rpi-firmware.mk
index 22eaaa2..1ebdd96 100644
--- a/package/rpi-firmware/rpi-firmware.mk
+++ b/package/rpi-firmware/rpi-firmware.mk
@@ -4,7 +4,7 @@
#
################################################################################
-RPI_FIRMWARE_VERSION = 2067241bc7cdf238fdeab7f5a3c22faa57dd5617
+RPI_FIRMWARE_VERSION = 086a8488de0f485e8879ac14ff505ff1d922eeed
RPI_FIRMWARE_SITE = $(call github,raspberrypi,firmware,$(RPI_FIRMWARE_VERSION))
RPI_FIRMWARE_LICENSE = BSD-3-Clause
RPI_FIRMWARE_LICENSE_FILES = boot/LICENCE.broadcom
--
2.7.4
^ permalink raw reply related [flat|nested] 4+ messages in thread
* [Buildroot] [PATCH v2 2/4] configs/raspberrypi*: bump kernel version
2018-03-15 22:37 [Buildroot] [PATCH v2 1/4] package/rpi-firmware: bump version Martin Bark
@ 2018-03-15 22:37 ` Martin Bark
2018-03-15 22:37 ` [Buildroot] [PATCH v2 3/4] board/raspberrypi: add support for rpi3 b+ Martin Bark
2018-03-15 22:37 ` [Buildroot] [PATCH v2 4/4] package/rpi-firmware: improve installation of dtb files Martin Bark
2 siblings, 0 replies; 4+ messages in thread
From: Martin Bark @ 2018-03-15 22:37 UTC (permalink / raw)
To: buildroot
Now based on 4.14.26 (from 4.9.79)
Signed-off-by: Martin Bark <martin@barkynet.com>
----
Changes v1 -> v2:
- Updated to use 4.14.26 kernel
---
configs/raspberrypi0_defconfig | 6 +++---
configs/raspberrypi2_defconfig | 6 +++---
configs/raspberrypi3_64_defconfig | 6 +++---
configs/raspberrypi3_defconfig | 6 +++---
configs/raspberrypi3_qt5we_defconfig | 6 +++---
configs/raspberrypi_defconfig | 6 +++---
6 files changed, 18 insertions(+), 18 deletions(-)
diff --git a/configs/raspberrypi0_defconfig b/configs/raspberrypi0_defconfig
index 0fb8a99..a2661be 100644
--- a/configs/raspberrypi0_defconfig
+++ b/configs/raspberrypi0_defconfig
@@ -2,15 +2,15 @@ BR2_arm=y
BR2_arm1176jzf_s=y
BR2_ARM_EABIHF=y
-# Linux headers same as kernel, a 4.9 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_9=y
+# Linux headers same as kernel, a 4.14 series
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_14=y
BR2_TOOLCHAIN_BUILDROOT_CXX=y
BR2_LINUX_KERNEL=y
BR2_LINUX_KERNEL_CUSTOM_GIT=y
BR2_LINUX_KERNEL_CUSTOM_REPO_URL="https://github.com/raspberrypi/linux.git"
-BR2_LINUX_KERNEL_CUSTOM_REPO_VERSION="33ee56d5927ceff630fbc87e3f5caa409b6ae114"
+BR2_LINUX_KERNEL_CUSTOM_REPO_VERSION="ad350a581a442f790b54abb81364295e937fe26b"
BR2_LINUX_KERNEL_DEFCONFIG="bcmrpi"
# Build the DTBs for A/B from the kernel sources: the zero is the same
diff --git a/configs/raspberrypi2_defconfig b/configs/raspberrypi2_defconfig
index 962a58c..2b4498c 100644
--- a/configs/raspberrypi2_defconfig
+++ b/configs/raspberrypi2_defconfig
@@ -7,13 +7,13 @@ BR2_TOOLCHAIN_BUILDROOT_CXX=y
BR2_SYSTEM_DHCP="eth0"
-# Linux headers same as kernel, a 4.9 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_9=y
+# Linux headers same as kernel, a 4.14 series
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_14=y
BR2_LINUX_KERNEL=y
BR2_LINUX_KERNEL_CUSTOM_GIT=y
BR2_LINUX_KERNEL_CUSTOM_REPO_URL="https://github.com/raspberrypi/linux.git"
-BR2_LINUX_KERNEL_CUSTOM_REPO_VERSION="33ee56d5927ceff630fbc87e3f5caa409b6ae114"
+BR2_LINUX_KERNEL_CUSTOM_REPO_VERSION="ad350a581a442f790b54abb81364295e937fe26b"
BR2_LINUX_KERNEL_DEFCONFIG="bcm2709"
# Build the DTB from the kernel sources
diff --git a/configs/raspberrypi3_64_defconfig b/configs/raspberrypi3_64_defconfig
index 6a35ac3..d7cce38 100644
--- a/configs/raspberrypi3_64_defconfig
+++ b/configs/raspberrypi3_64_defconfig
@@ -6,13 +6,13 @@ BR2_TOOLCHAIN_BUILDROOT_CXX=y
BR2_SYSTEM_DHCP="eth0"
-# Linux headers same as kernel, a 4.9 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_9=y
+# Linux headers same as kernel, a 4.14 series
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_14=y
BR2_LINUX_KERNEL=y
BR2_LINUX_KERNEL_CUSTOM_GIT=y
BR2_LINUX_KERNEL_CUSTOM_REPO_URL="https://github.com/raspberrypi/linux.git"
-BR2_LINUX_KERNEL_CUSTOM_REPO_VERSION="33ee56d5927ceff630fbc87e3f5caa409b6ae114"
+BR2_LINUX_KERNEL_CUSTOM_REPO_VERSION="ad350a581a442f790b54abb81364295e937fe26b"
BR2_LINUX_KERNEL_DEFCONFIG="bcmrpi3"
# Build the DTB from the kernel sources
diff --git a/configs/raspberrypi3_defconfig b/configs/raspberrypi3_defconfig
index 9304f0c..a8217cf 100644
--- a/configs/raspberrypi3_defconfig
+++ b/configs/raspberrypi3_defconfig
@@ -6,13 +6,13 @@ BR2_TOOLCHAIN_BUILDROOT_CXX=y
BR2_SYSTEM_DHCP="eth0"
-# Linux headers same as kernel, a 4.9 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_9=y
+# Linux headers same as kernel, a 4.14 series
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_14=y
BR2_LINUX_KERNEL=y
BR2_LINUX_KERNEL_CUSTOM_GIT=y
BR2_LINUX_KERNEL_CUSTOM_REPO_URL="https://github.com/raspberrypi/linux.git"
-BR2_LINUX_KERNEL_CUSTOM_REPO_VERSION="33ee56d5927ceff630fbc87e3f5caa409b6ae114"
+BR2_LINUX_KERNEL_CUSTOM_REPO_VERSION="ad350a581a442f790b54abb81364295e937fe26b"
BR2_LINUX_KERNEL_DEFCONFIG="bcm2709"
# Build the DTB from the kernel sources
diff --git a/configs/raspberrypi3_qt5we_defconfig b/configs/raspberrypi3_qt5we_defconfig
index d4ada47..b8458c6 100644
--- a/configs/raspberrypi3_qt5we_defconfig
+++ b/configs/raspberrypi3_qt5we_defconfig
@@ -7,13 +7,13 @@ BR2_TOOLCHAIN_BUILDROOT_CXX=y
BR2_SYSTEM_DHCP="eth0"
-# Linux headers same as kernel, a 4.9 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_9=y
+# Linux headers same as kernel, a 4.14 series
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_14=y
BR2_LINUX_KERNEL=y
BR2_LINUX_KERNEL_CUSTOM_GIT=y
BR2_LINUX_KERNEL_CUSTOM_REPO_URL="https://github.com/raspberrypi/linux.git"
-BR2_LINUX_KERNEL_CUSTOM_REPO_VERSION="33ee56d5927ceff630fbc87e3f5caa409b6ae114"
+BR2_LINUX_KERNEL_CUSTOM_REPO_VERSION="ad350a581a442f790b54abb81364295e937fe26b"
BR2_LINUX_KERNEL_DEFCONFIG="bcm2709"
# Build the DTB from the kernel sources
diff --git a/configs/raspberrypi_defconfig b/configs/raspberrypi_defconfig
index daca836..17829ef 100644
--- a/configs/raspberrypi_defconfig
+++ b/configs/raspberrypi_defconfig
@@ -4,15 +4,15 @@ BR2_ARM_EABIHF=y
BR2_SYSTEM_DHCP="eth0"
-# Linux headers same as kernel, a 4.9 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_9=y
+# Linux headers same as kernel, a 4.14 series
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_14=y
BR2_TOOLCHAIN_BUILDROOT_CXX=y
BR2_LINUX_KERNEL=y
BR2_LINUX_KERNEL_CUSTOM_GIT=y
BR2_LINUX_KERNEL_CUSTOM_REPO_URL="https://github.com/raspberrypi/linux.git"
-BR2_LINUX_KERNEL_CUSTOM_REPO_VERSION="33ee56d5927ceff630fbc87e3f5caa409b6ae114"
+BR2_LINUX_KERNEL_CUSTOM_REPO_VERSION="ad350a581a442f790b54abb81364295e937fe26b"
BR2_LINUX_KERNEL_DEFCONFIG="bcmrpi"
# Build the DTBs for A/B, A+/B+ and compute module from the kernel sources
--
2.7.4
^ permalink raw reply related [flat|nested] 4+ messages in thread
* [Buildroot] [PATCH v2 3/4] board/raspberrypi: add support for rpi3 b+
2018-03-15 22:37 [Buildroot] [PATCH v2 1/4] package/rpi-firmware: bump version Martin Bark
2018-03-15 22:37 ` [Buildroot] [PATCH v2 2/4] configs/raspberrypi*: bump kernel version Martin Bark
@ 2018-03-15 22:37 ` Martin Bark
2018-03-15 22:37 ` [Buildroot] [PATCH v2 4/4] package/rpi-firmware: improve installation of dtb files Martin Bark
2 siblings, 0 replies; 4+ messages in thread
From: Martin Bark @ 2018-03-15 22:37 UTC (permalink / raw)
To: buildroot
Signed-off-by: Martin Bark <martin@barkynet.com>
----
Changes v1 -> v2:
- none
---
board/raspberrypi/genimage-raspberrypi3.cfg | 1 +
board/raspberrypi/readme.txt | 3 ++-
configs/raspberrypi3_defconfig | 2 +-
configs/raspberrypi3_qt5we_defconfig | 2 +-
4 files changed, 5 insertions(+), 3 deletions(-)
diff --git a/board/raspberrypi/genimage-raspberrypi3.cfg b/board/raspberrypi/genimage-raspberrypi3.cfg
index 98ff709..0a54724 100644
--- a/board/raspberrypi/genimage-raspberrypi3.cfg
+++ b/board/raspberrypi/genimage-raspberrypi3.cfg
@@ -2,6 +2,7 @@ image boot.vfat {
vfat {
files = {
"bcm2710-rpi-3-b.dtb",
+ "bcm2710-rpi-3-b-plus.dtb",
"bcm2710-rpi-cm3.dtb",
"rpi-firmware/bootcode.bin",
"rpi-firmware/cmdline.txt",
diff --git a/board/raspberrypi/readme.txt b/board/raspberrypi/readme.txt
index 9482693..9f91581 100644
--- a/board/raspberrypi/readme.txt
+++ b/board/raspberrypi/readme.txt
@@ -30,7 +30,7 @@ For model 2 B:
$ make raspberrypi2_defconfig
-For model 3 B:
+For model 3 B and B+:
$ make raspberrypi3_defconfig
@@ -56,6 +56,7 @@ After building, you should obtain this tree:
+-- bcm2708-rpi-b-plus.dtb [1]
+-- bcm2709-rpi-2-b.dtb [1]
+-- bcm2710-rpi-3-b.dtb [1]
+ +-- bcm2710-rpi-3-b-plus.dtb [1]
+-- boot.vfat
+-- rootfs.ext4
+-- rpi-firmware/
diff --git a/configs/raspberrypi3_defconfig b/configs/raspberrypi3_defconfig
index a8217cf..062dbbd 100644
--- a/configs/raspberrypi3_defconfig
+++ b/configs/raspberrypi3_defconfig
@@ -17,7 +17,7 @@ BR2_LINUX_KERNEL_DEFCONFIG="bcm2709"
# Build the DTB from the kernel sources
BR2_LINUX_KERNEL_DTS_SUPPORT=y
-BR2_LINUX_KERNEL_INTREE_DTS_NAME="bcm2710-rpi-3-b bcm2710-rpi-cm3"
+BR2_LINUX_KERNEL_INTREE_DTS_NAME="bcm2710-rpi-3-b bcm2710-rpi-3-b-plus bcm2710-rpi-cm3"
BR2_PACKAGE_RPI_FIRMWARE=y
diff --git a/configs/raspberrypi3_qt5we_defconfig b/configs/raspberrypi3_qt5we_defconfig
index b8458c6..5e91390 100644
--- a/configs/raspberrypi3_qt5we_defconfig
+++ b/configs/raspberrypi3_qt5we_defconfig
@@ -18,7 +18,7 @@ BR2_LINUX_KERNEL_DEFCONFIG="bcm2709"
# Build the DTB from the kernel sources
BR2_LINUX_KERNEL_DTS_SUPPORT=y
-BR2_LINUX_KERNEL_INTREE_DTS_NAME="bcm2710-rpi-3-b bcm2710-rpi-cm3"
+BR2_LINUX_KERNEL_INTREE_DTS_NAME="bcm2710-rpi-3-b bcm2710-rpi-3-b-plus bcm2710-rpi-cm3"
# Build Qt5 WebEngine
BR2_PACKAGE_LIBERATION=y
--
2.7.4
^ permalink raw reply related [flat|nested] 4+ messages in thread
* [Buildroot] [PATCH v2 4/4] package/rpi-firmware: improve installation of dtb files
2018-03-15 22:37 [Buildroot] [PATCH v2 1/4] package/rpi-firmware: bump version Martin Bark
2018-03-15 22:37 ` [Buildroot] [PATCH v2 2/4] configs/raspberrypi*: bump kernel version Martin Bark
2018-03-15 22:37 ` [Buildroot] [PATCH v2 3/4] board/raspberrypi: add support for rpi3 b+ Martin Bark
@ 2018-03-15 22:37 ` Martin Bark
2 siblings, 0 replies; 4+ messages in thread
From: Martin Bark @ 2018-03-15 22:37 UTC (permalink / raw)
To: buildroot
Don't list specific dtb files, instead install all dtb files in the same
way as dtbo files are currently done.
Signed-off-by: Martin Bark <martin@barkynet.com>
----
Changes v1 -> v2:
- none
---
package/rpi-firmware/rpi-firmware.mk | 7 +++----
1 file changed, 3 insertions(+), 4 deletions(-)
diff --git a/package/rpi-firmware/rpi-firmware.mk b/package/rpi-firmware/rpi-firmware.mk
index 1ebdd96..9cc3d4a 100644
--- a/package/rpi-firmware/rpi-firmware.mk
+++ b/package/rpi-firmware/rpi-firmware.mk
@@ -12,10 +12,9 @@ RPI_FIRMWARE_INSTALL_IMAGES = YES
ifeq ($(BR2_PACKAGE_RPI_FIRMWARE_INSTALL_DTBS),y)
define RPI_FIRMWARE_INSTALL_DTB
- $(INSTALL) -D -m 0644 $(@D)/boot/bcm2708-rpi-b.dtb $(BINARIES_DIR)/rpi-firmware/bcm2708-rpi-b.dtb
- $(INSTALL) -D -m 0644 $(@D)/boot/bcm2708-rpi-b-plus.dtb $(BINARIES_DIR)/rpi-firmware/bcm2708-rpi-b-plus.dtb
- $(INSTALL) -D -m 0644 $(@D)/boot/bcm2709-rpi-2-b.dtb $(BINARIES_DIR)/rpi-firmware/bcm2709-rpi-2-b.dtb
- $(INSTALL) -D -m 0644 $(@D)/boot/bcm2710-rpi-3-b.dtb $(BINARIES_DIR)/rpi-firmware/bcm2710-rpi-3-b.dtb
+ for dtb in $(@D)/boot/*.dtb; do \
+ $(INSTALL) -D -m 0644 $${dtb} $(BINARIES_DIR)/rpi-firmware/$${dtb##*/} || exit 1; \
+ done
endef
endif
--
2.7.4
^ permalink raw reply related [flat|nested] 4+ messages in thread
end of thread, other threads:[~2018-03-15 22:37 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2018-03-15 22:37 [Buildroot] [PATCH v2 1/4] package/rpi-firmware: bump version Martin Bark
2018-03-15 22:37 ` [Buildroot] [PATCH v2 2/4] configs/raspberrypi*: bump kernel version Martin Bark
2018-03-15 22:37 ` [Buildroot] [PATCH v2 3/4] board/raspberrypi: add support for rpi3 b+ Martin Bark
2018-03-15 22:37 ` [Buildroot] [PATCH v2 4/4] package/rpi-firmware: improve installation of dtb files Martin Bark
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.