* [PATCH] usb: host: Remove the deprecated ATH79 USB host config options
@ 2018-03-24 22:47 ` Alban
0 siblings, 0 replies; 6+ messages in thread
From: Alban Bedel @ 2018-03-24 22:47 UTC (permalink / raw)
To: linux-usb
Cc: Alban Bedel, Ralf Baechle, James Hogan, Greg Kroah-Hartman,
Alan Stern, Mathias Nyman, Benjamin Herrenschmidt, Alex Elder,
Chunfeng Yun, Lu Baolu, Tony Lindgren, linux-mips, linux-kernel
The options USB_EHCI_ATH79 and USB_OHCI_ATH79 only enable the
generic EHCI and OHCI platform drivers, and have been marked as
deprecated since 2012.
These can be safely removed if we make sure that USB_EHCI_ROOT_HUB_TT
still get enabled for the EHCI driver. This is now done be selecting
this option when the EHCI platform driver is enabled on the ATH79
platform.
Signed-off-by: Alban Bedel <albeu@free.fr>
---
arch/mips/Kconfig | 1 +
drivers/usb/host/Kconfig | 25 -------------------------
2 files changed, 1 insertion(+), 25 deletions(-)
diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index 8128c3b..61e9a24 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -200,6 +200,7 @@ config ATH79
select SYS_SUPPORTS_MIPS16
select SYS_SUPPORTS_ZBOOT_UART_PROM
select USE_OF
+ select USB_EHCI_ROOT_HUB_TT if USB_EHCI_HCD_PLATFORM
help
Support for the Atheros AR71XX/AR724X/AR913X SoCs.
diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig
index 4fcfb30..55b45dc 100644
--- a/drivers/usb/host/Kconfig
+++ b/drivers/usb/host/Kconfig
@@ -293,19 +293,6 @@ config USB_CNS3XXX_EHCI
It is needed for high-speed (480Mbit/sec) USB 2.0 device
support.
-config USB_EHCI_ATH79
- bool "EHCI support for AR7XXX/AR9XXX SoCs (DEPRECATED)"
- depends on (SOC_AR71XX || SOC_AR724X || SOC_AR913X || SOC_AR933X)
- select USB_EHCI_ROOT_HUB_TT
- select USB_EHCI_HCD_PLATFORM
- default y
- ---help---
- This option is deprecated now and the driver was removed, use
- USB_EHCI_HCD_PLATFORM instead.
-
- Enables support for the built-in EHCI controller present
- on the Atheros AR7XXX/AR9XXX SoCs.
-
config USB_EHCI_HCD_PLATFORM
tristate "Generic EHCI driver for a platform device"
default n
@@ -489,18 +476,6 @@ config USB_OHCI_HCD_DAVINCI
controller. This driver cannot currently be a loadable
module because it lacks a proper PHY abstraction.
-config USB_OHCI_ATH79
- bool "USB OHCI support for the Atheros AR71XX/AR7240 SoCs (DEPRECATED)"
- depends on (SOC_AR71XX || SOC_AR724X)
- select USB_OHCI_HCD_PLATFORM
- default y
- help
- This option is deprecated now and the driver was removed, use
- USB_OHCI_HCD_PLATFORM instead.
-
- Enables support for the built-in OHCI controller present on the
- Atheros AR71XX/AR7240 SoCs.
-
config USB_OHCI_HCD_PPC_OF_BE
bool "OHCI support for OF platform bus (big endian)"
depends on PPC
--
2.7.4
^ permalink raw reply related [flat|nested] 6+ messages in thread
* usb: host: Remove the deprecated ATH79 USB host config options
@ 2018-03-24 22:47 ` Alban
0 siblings, 0 replies; 6+ messages in thread
From: Alban @ 2018-03-24 22:47 UTC (permalink / raw)
To: linux-usb
Cc: Alban Bedel, Ralf Baechle, James Hogan, Greg Kroah-Hartman,
Alan Stern, Mathias Nyman, Benjamin Herrenschmidt, Alex Elder,
Chunfeng Yun, Lu Baolu, Tony Lindgren, linux-mips, linux-kernel
The options USB_EHCI_ATH79 and USB_OHCI_ATH79 only enable the
generic EHCI and OHCI platform drivers, and have been marked as
deprecated since 2012.
These can be safely removed if we make sure that USB_EHCI_ROOT_HUB_TT
still get enabled for the EHCI driver. This is now done be selecting
this option when the EHCI platform driver is enabled on the ATH79
platform.
Signed-off-by: Alban Bedel <albeu@free.fr>
---
arch/mips/Kconfig | 1 +
drivers/usb/host/Kconfig | 25 -------------------------
2 files changed, 1 insertion(+), 25 deletions(-)
diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index 8128c3b..61e9a24 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -200,6 +200,7 @@ config ATH79
select SYS_SUPPORTS_MIPS16
select SYS_SUPPORTS_ZBOOT_UART_PROM
select USE_OF
+ select USB_EHCI_ROOT_HUB_TT if USB_EHCI_HCD_PLATFORM
help
Support for the Atheros AR71XX/AR724X/AR913X SoCs.
diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig
index 4fcfb30..55b45dc 100644
--- a/drivers/usb/host/Kconfig
+++ b/drivers/usb/host/Kconfig
@@ -293,19 +293,6 @@ config USB_CNS3XXX_EHCI
It is needed for high-speed (480Mbit/sec) USB 2.0 device
support.
-config USB_EHCI_ATH79
- bool "EHCI support for AR7XXX/AR9XXX SoCs (DEPRECATED)"
- depends on (SOC_AR71XX || SOC_AR724X || SOC_AR913X || SOC_AR933X)
- select USB_EHCI_ROOT_HUB_TT
- select USB_EHCI_HCD_PLATFORM
- default y
- ---help---
- This option is deprecated now and the driver was removed, use
- USB_EHCI_HCD_PLATFORM instead.
-
- Enables support for the built-in EHCI controller present
- on the Atheros AR7XXX/AR9XXX SoCs.
-
config USB_EHCI_HCD_PLATFORM
tristate "Generic EHCI driver for a platform device"
default n
@@ -489,18 +476,6 @@ config USB_OHCI_HCD_DAVINCI
controller. This driver cannot currently be a loadable
module because it lacks a proper PHY abstraction.
-config USB_OHCI_ATH79
- bool "USB OHCI support for the Atheros AR71XX/AR7240 SoCs (DEPRECATED)"
- depends on (SOC_AR71XX || SOC_AR724X)
- select USB_OHCI_HCD_PLATFORM
- default y
- help
- This option is deprecated now and the driver was removed, use
- USB_OHCI_HCD_PLATFORM instead.
-
- Enables support for the built-in OHCI controller present on the
- Atheros AR71XX/AR7240 SoCs.
-
config USB_OHCI_HCD_PPC_OF_BE
bool "OHCI support for OF platform bus (big endian)"
depends on PPC
^ permalink raw reply related [flat|nested] 6+ messages in thread
* Re: [PATCH] usb: host: Remove the deprecated ATH79 USB host config options
@ 2018-03-26 18:28 ` Alan Stern
0 siblings, 0 replies; 6+ messages in thread
From: Alan Stern @ 2018-03-26 18:28 UTC (permalink / raw)
To: Alban Bedel
Cc: linux-usb, Ralf Baechle, James Hogan, Greg Kroah-Hartman,
Mathias Nyman, Benjamin Herrenschmidt, Alex Elder, Chunfeng Yun,
Lu Baolu, Tony Lindgren, linux-mips, linux-kernel
On Sat, 24 Mar 2018, Alban Bedel wrote:
> The options USB_EHCI_ATH79 and USB_OHCI_ATH79 only enable the
> generic EHCI and OHCI platform drivers, and have been marked as
> deprecated since 2012.
>
> These can be safely removed if we make sure that USB_EHCI_ROOT_HUB_TT
> still get enabled for the EHCI driver. This is now done be selecting
> this option when the EHCI platform driver is enabled on the ATH79
> platform.
>
> Signed-off-by: Alban Bedel <albeu@free.fr>
> ---
> arch/mips/Kconfig | 1 +
> drivers/usb/host/Kconfig | 25 -------------------------
> 2 files changed, 1 insertion(+), 25 deletions(-)
>
> diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
> index 8128c3b..61e9a24 100644
> --- a/arch/mips/Kconfig
> +++ b/arch/mips/Kconfig
> @@ -200,6 +200,7 @@ config ATH79
> select SYS_SUPPORTS_MIPS16
> select SYS_SUPPORTS_ZBOOT_UART_PROM
> select USE_OF
> + select USB_EHCI_ROOT_HUB_TT if USB_EHCI_HCD_PLATFORM
> help
> Support for the Atheros AR71XX/AR724X/AR913X SoCs.
>
> diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig
> index 4fcfb30..55b45dc 100644
> --- a/drivers/usb/host/Kconfig
> +++ b/drivers/usb/host/Kconfig
> @@ -293,19 +293,6 @@ config USB_CNS3XXX_EHCI
> It is needed for high-speed (480Mbit/sec) USB 2.0 device
> support.
>
> -config USB_EHCI_ATH79
> - bool "EHCI support for AR7XXX/AR9XXX SoCs (DEPRECATED)"
> - depends on (SOC_AR71XX || SOC_AR724X || SOC_AR913X || SOC_AR933X)
> - select USB_EHCI_ROOT_HUB_TT
> - select USB_EHCI_HCD_PLATFORM
> - default y
> - ---help---
> - This option is deprecated now and the driver was removed, use
> - USB_EHCI_HCD_PLATFORM instead.
> -
> - Enables support for the built-in EHCI controller present
> - on the Atheros AR7XXX/AR9XXX SoCs.
> -
> config USB_EHCI_HCD_PLATFORM
> tristate "Generic EHCI driver for a platform device"
> default n
> @@ -489,18 +476,6 @@ config USB_OHCI_HCD_DAVINCI
> controller. This driver cannot currently be a loadable
> module because it lacks a proper PHY abstraction.
>
> -config USB_OHCI_ATH79
> - bool "USB OHCI support for the Atheros AR71XX/AR7240 SoCs (DEPRECATED)"
> - depends on (SOC_AR71XX || SOC_AR724X)
> - select USB_OHCI_HCD_PLATFORM
> - default y
> - help
> - This option is deprecated now and the driver was removed, use
> - USB_OHCI_HCD_PLATFORM instead.
> -
> - Enables support for the built-in OHCI controller present on the
> - Atheros AR71XX/AR7240 SoCs.
> -
> config USB_OHCI_HCD_PPC_OF_BE
> bool "OHCI support for OF platform bus (big endian)"
> depends on PPC
For the EHCI and OHCI portions:
Acked-by: Alan Stern <stern@rowland.harvard.edu>
^ permalink raw reply [flat|nested] 6+ messages in thread
* usb: host: Remove the deprecated ATH79 USB host config options
@ 2018-03-26 18:28 ` Alan Stern
0 siblings, 0 replies; 6+ messages in thread
From: Alan Stern @ 2018-03-26 18:28 UTC (permalink / raw)
To: Alban Bedel
Cc: linux-usb, Ralf Baechle, James Hogan, Greg Kroah-Hartman,
Mathias Nyman, Benjamin Herrenschmidt, Alex Elder, Chunfeng Yun,
Lu Baolu, Tony Lindgren, linux-mips, linux-kernel
On Sat, 24 Mar 2018, Alban Bedel wrote:
> The options USB_EHCI_ATH79 and USB_OHCI_ATH79 only enable the
> generic EHCI and OHCI platform drivers, and have been marked as
> deprecated since 2012.
>
> These can be safely removed if we make sure that USB_EHCI_ROOT_HUB_TT
> still get enabled for the EHCI driver. This is now done be selecting
> this option when the EHCI platform driver is enabled on the ATH79
> platform.
>
> Signed-off-by: Alban Bedel <albeu@free.fr>
> ---
> arch/mips/Kconfig | 1 +
> drivers/usb/host/Kconfig | 25 -------------------------
> 2 files changed, 1 insertion(+), 25 deletions(-)
>
> diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
> index 8128c3b..61e9a24 100644
> --- a/arch/mips/Kconfig
> +++ b/arch/mips/Kconfig
> @@ -200,6 +200,7 @@ config ATH79
> select SYS_SUPPORTS_MIPS16
> select SYS_SUPPORTS_ZBOOT_UART_PROM
> select USE_OF
> + select USB_EHCI_ROOT_HUB_TT if USB_EHCI_HCD_PLATFORM
> help
> Support for the Atheros AR71XX/AR724X/AR913X SoCs.
>
> diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig
> index 4fcfb30..55b45dc 100644
> --- a/drivers/usb/host/Kconfig
> +++ b/drivers/usb/host/Kconfig
> @@ -293,19 +293,6 @@ config USB_CNS3XXX_EHCI
> It is needed for high-speed (480Mbit/sec) USB 2.0 device
> support.
>
> -config USB_EHCI_ATH79
> - bool "EHCI support for AR7XXX/AR9XXX SoCs (DEPRECATED)"
> - depends on (SOC_AR71XX || SOC_AR724X || SOC_AR913X || SOC_AR933X)
> - select USB_EHCI_ROOT_HUB_TT
> - select USB_EHCI_HCD_PLATFORM
> - default y
> - ---help---
> - This option is deprecated now and the driver was removed, use
> - USB_EHCI_HCD_PLATFORM instead.
> -
> - Enables support for the built-in EHCI controller present
> - on the Atheros AR7XXX/AR9XXX SoCs.
> -
> config USB_EHCI_HCD_PLATFORM
> tristate "Generic EHCI driver for a platform device"
> default n
> @@ -489,18 +476,6 @@ config USB_OHCI_HCD_DAVINCI
> controller. This driver cannot currently be a loadable
> module because it lacks a proper PHY abstraction.
>
> -config USB_OHCI_ATH79
> - bool "USB OHCI support for the Atheros AR71XX/AR7240 SoCs (DEPRECATED)"
> - depends on (SOC_AR71XX || SOC_AR724X)
> - select USB_OHCI_HCD_PLATFORM
> - default y
> - help
> - This option is deprecated now and the driver was removed, use
> - USB_OHCI_HCD_PLATFORM instead.
> -
> - Enables support for the built-in OHCI controller present on the
> - Atheros AR71XX/AR7240 SoCs.
> -
> config USB_OHCI_HCD_PPC_OF_BE
> bool "OHCI support for OF platform bus (big endian)"
> depends on PPC
For the EHCI and OHCI portions:
Acked-by: Alan Stern <stern@rowland.harvard.edu>
---
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH] usb: host: Remove the deprecated ATH79 USB host config options
@ 2018-03-26 18:28 ` Alan Stern
0 siblings, 0 replies; 6+ messages in thread
From: Alan Stern @ 2018-03-26 18:28 UTC (permalink / raw)
To: Alban Bedel
Cc: linux-usb, Ralf Baechle, James Hogan, Greg Kroah-Hartman,
Mathias Nyman, Benjamin Herrenschmidt, Alex Elder, Chunfeng Yun,
Lu Baolu, Tony Lindgren, linux-mips, linux-kernel
On Sat, 24 Mar 2018, Alban Bedel wrote:
> The options USB_EHCI_ATH79 and USB_OHCI_ATH79 only enable the
> generic EHCI and OHCI platform drivers, and have been marked as
> deprecated since 2012.
>
> These can be safely removed if we make sure that USB_EHCI_ROOT_HUB_TT
> still get enabled for the EHCI driver. This is now done be selecting
> this option when the EHCI platform driver is enabled on the ATH79
> platform.
>
> Signed-off-by: Alban Bedel <albeu@free.fr>
> ---
> arch/mips/Kconfig | 1 +
> drivers/usb/host/Kconfig | 25 -------------------------
> 2 files changed, 1 insertion(+), 25 deletions(-)
>
> diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
> index 8128c3b..61e9a24 100644
> --- a/arch/mips/Kconfig
> +++ b/arch/mips/Kconfig
> @@ -200,6 +200,7 @@ config ATH79
> select SYS_SUPPORTS_MIPS16
> select SYS_SUPPORTS_ZBOOT_UART_PROM
> select USE_OF
> + select USB_EHCI_ROOT_HUB_TT if USB_EHCI_HCD_PLATFORM
> help
> Support for the Atheros AR71XX/AR724X/AR913X SoCs.
>
> diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig
> index 4fcfb30..55b45dc 100644
> --- a/drivers/usb/host/Kconfig
> +++ b/drivers/usb/host/Kconfig
> @@ -293,19 +293,6 @@ config USB_CNS3XXX_EHCI
> It is needed for high-speed (480Mbit/sec) USB 2.0 device
> support.
>
> -config USB_EHCI_ATH79
> - bool "EHCI support for AR7XXX/AR9XXX SoCs (DEPRECATED)"
> - depends on (SOC_AR71XX || SOC_AR724X || SOC_AR913X || SOC_AR933X)
> - select USB_EHCI_ROOT_HUB_TT
> - select USB_EHCI_HCD_PLATFORM
> - default y
> - ---help---
> - This option is deprecated now and the driver was removed, use
> - USB_EHCI_HCD_PLATFORM instead.
> -
> - Enables support for the built-in EHCI controller present
> - on the Atheros AR7XXX/AR9XXX SoCs.
> -
> config USB_EHCI_HCD_PLATFORM
> tristate "Generic EHCI driver for a platform device"
> default n
> @@ -489,18 +476,6 @@ config USB_OHCI_HCD_DAVINCI
> controller. This driver cannot currently be a loadable
> module because it lacks a proper PHY abstraction.
>
> -config USB_OHCI_ATH79
> - bool "USB OHCI support for the Atheros AR71XX/AR7240 SoCs (DEPRECATED)"
> - depends on (SOC_AR71XX || SOC_AR724X)
> - select USB_OHCI_HCD_PLATFORM
> - default y
> - help
> - This option is deprecated now and the driver was removed, use
> - USB_OHCI_HCD_PLATFORM instead.
> -
> - Enables support for the built-in OHCI controller present on the
> - Atheros AR71XX/AR7240 SoCs.
> -
> config USB_OHCI_HCD_PPC_OF_BE
> bool "OHCI support for OF platform bus (big endian)"
> depends on PPC
For the EHCI and OHCI portions:
Acked-by: Alan Stern <stern@rowland.harvard.edu>
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH] usb: host: Remove the deprecated ATH79 USB host config options
@ 2018-03-26 18:28 ` Alan Stern
0 siblings, 0 replies; 6+ messages in thread
From: Alan Stern @ 2018-03-26 18:28 UTC (permalink / raw)
To: Alban Bedel
Cc: linux-usb, Ralf Baechle, James Hogan, Greg Kroah-Hartman,
Mathias Nyman, Benjamin Herrenschmidt, Alex Elder, Chunfeng Yun,
Lu Baolu, Tony Lindgren, linux-mips, linux-kernel
On Sat, 24 Mar 2018, Alban Bedel wrote:
> The options USB_EHCI_ATH79 and USB_OHCI_ATH79 only enable the
> generic EHCI and OHCI platform drivers, and have been marked as
> deprecated since 2012.
>
> These can be safely removed if we make sure that USB_EHCI_ROOT_HUB_TT
> still get enabled for the EHCI driver. This is now done be selecting
> this option when the EHCI platform driver is enabled on the ATH79
> platform.
>
> Signed-off-by: Alban Bedel <albeu@free.fr>
> ---
> arch/mips/Kconfig | 1 +
> drivers/usb/host/Kconfig | 25 -------------------------
> 2 files changed, 1 insertion(+), 25 deletions(-)
>
> diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
> index 8128c3b..61e9a24 100644
> --- a/arch/mips/Kconfig
> +++ b/arch/mips/Kconfig
> @@ -200,6 +200,7 @@ config ATH79
> select SYS_SUPPORTS_MIPS16
> select SYS_SUPPORTS_ZBOOT_UART_PROM
> select USE_OF
> + select USB_EHCI_ROOT_HUB_TT if USB_EHCI_HCD_PLATFORM
> help
> Support for the Atheros AR71XX/AR724X/AR913X SoCs.
>
> diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig
> index 4fcfb30..55b45dc 100644
> --- a/drivers/usb/host/Kconfig
> +++ b/drivers/usb/host/Kconfig
> @@ -293,19 +293,6 @@ config USB_CNS3XXX_EHCI
> It is needed for high-speed (480Mbit/sec) USB 2.0 device
> support.
>
> -config USB_EHCI_ATH79
> - bool "EHCI support for AR7XXX/AR9XXX SoCs (DEPRECATED)"
> - depends on (SOC_AR71XX || SOC_AR724X || SOC_AR913X || SOC_AR933X)
> - select USB_EHCI_ROOT_HUB_TT
> - select USB_EHCI_HCD_PLATFORM
> - default y
> - ---help---
> - This option is deprecated now and the driver was removed, use
> - USB_EHCI_HCD_PLATFORM instead.
> -
> - Enables support for the built-in EHCI controller present
> - on the Atheros AR7XXX/AR9XXX SoCs.
> -
> config USB_EHCI_HCD_PLATFORM
> tristate "Generic EHCI driver for a platform device"
> default n
> @@ -489,18 +476,6 @@ config USB_OHCI_HCD_DAVINCI
> controller. This driver cannot currently be a loadable
> module because it lacks a proper PHY abstraction.
>
> -config USB_OHCI_ATH79
> - bool "USB OHCI support for the Atheros AR71XX/AR7240 SoCs (DEPRECATED)"
> - depends on (SOC_AR71XX || SOC_AR724X)
> - select USB_OHCI_HCD_PLATFORM
> - default y
> - help
> - This option is deprecated now and the driver was removed, use
> - USB_OHCI_HCD_PLATFORM instead.
> -
> - Enables support for the built-in OHCI controller present on the
> - Atheros AR71XX/AR7240 SoCs.
> -
> config USB_OHCI_HCD_PPC_OF_BE
> bool "OHCI support for OF platform bus (big endian)"
> depends on PPC
For the EHCI and OHCI portions:
Acked-by: Alan Stern <stern@rowland.harvard.edu>
^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2018-03-26 18:28 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2018-03-24 22:47 [PATCH] usb: host: Remove the deprecated ATH79 USB host config options Alban Bedel
2018-03-24 22:47 ` Alban
2018-03-26 18:28 ` [PATCH] " Alan Stern
2018-03-26 18:28 ` Alan Stern
2018-03-26 18:28 ` Alan Stern
2018-03-26 18:28 ` Alan Stern
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.