All of lore.kernel.org
 help / color / mirror / Atom feed
* [PATCH 0/3] Add support for STM32MP1 ADC
@ 2018-04-18 15:37 ` Fabrice Gasnier
  0 siblings, 0 replies; 29+ messages in thread
From: Fabrice Gasnier @ 2018-04-18 15:37 UTC (permalink / raw)
  To: jic23, robh+dt, alexandre.torgue
  Cc: mark.rutland, mcoquelin.stm32, lars, knaack.h, pmeerw,
	fabrice.gasnier, linux-iio, devicetree, linux-arm-kernel,
	linux-kernel, benjamin.gaignard

Add support for STM32MP1 Analog to Digital Converter variant.
It's quite similar to STM32H7 ADC and re-use most of existing driver.

Fabrice Gasnier (3):
  dt-bindings: iio: stm32-adc: add support for STM32MP1.
  iio: adc: stm32-adc: add support for STM32MP1
  ARM: dts: stm32: Add ADC support to stm32mp157c

 .../devicetree/bindings/iio/adc/st,stm32-adc.txt   |  6 +-
 arch/arm/boot/dts/stm32mp157c.dtsi                 | 32 +++++++++++
 drivers/iio/adc/stm32-adc-core.c                   | 66 ++++++++++++++++------
 drivers/iio/adc/stm32-adc.c                        | 47 +++++++++++++--
 4 files changed, 128 insertions(+), 23 deletions(-)

-- 
1.9.1

^ permalink raw reply	[flat|nested] 29+ messages in thread
* [PATCH 0/3] Add support for STM32MP1 ADC
@ 2018-04-18 15:37 ` Fabrice Gasnier
  0 siblings, 0 replies; 29+ messages in thread
From: Fabrice Gasnier @ 2018-04-18 15:37 UTC (permalink / raw)
  To: jic23, robh+dt, alexandre.torgue
  Cc: mark.rutland, mcoquelin.stm32, lars, knaack.h, pmeerw,
	fabrice.gasnier, linux-iio, devicetree, linux-arm-kernel,
	linux-kernel, benjamin.gaignard

Add support for STM32MP1 Analog to Digital Converter variant.
It's quite similar to STM32H7 ADC and re-use most of existing driver.

Fabrice Gasnier (3):
  dt-bindings: iio: stm32-adc: add support for STM32MP1.
  iio: adc: stm32-adc: add support for STM32MP1
  ARM: dts: stm32: Add ADC support to stm32mp157c

 .../devicetree/bindings/iio/adc/st,stm32-adc.txt   |  6 +-
 arch/arm/boot/dts/stm32mp157c.dtsi                 | 32 +++++++++++
 drivers/iio/adc/stm32-adc-core.c                   | 66 ++++++++++++++++------
 drivers/iio/adc/stm32-adc.c                        | 47 +++++++++++++--
 4 files changed, 128 insertions(+), 23 deletions(-)

-- 
1.9.1

^ permalink raw reply	[flat|nested] 29+ messages in thread
* [PATCH 0/3] Add support for STM32MP1 ADC
@ 2018-04-18 15:37 ` Fabrice Gasnier
  0 siblings, 0 replies; 29+ messages in thread
From: Fabrice Gasnier @ 2018-04-18 15:37 UTC (permalink / raw)
  To: linux-arm-kernel

Add support for STM32MP1 Analog to Digital Converter variant.
It's quite similar to STM32H7 ADC and re-use most of existing driver.

Fabrice Gasnier (3):
  dt-bindings: iio: stm32-adc: add support for STM32MP1.
  iio: adc: stm32-adc: add support for STM32MP1
  ARM: dts: stm32: Add ADC support to stm32mp157c

 .../devicetree/bindings/iio/adc/st,stm32-adc.txt   |  6 +-
 arch/arm/boot/dts/stm32mp157c.dtsi                 | 32 +++++++++++
 drivers/iio/adc/stm32-adc-core.c                   | 66 ++++++++++++++++------
 drivers/iio/adc/stm32-adc.c                        | 47 +++++++++++++--
 4 files changed, 128 insertions(+), 23 deletions(-)

-- 
1.9.1

^ permalink raw reply	[flat|nested] 29+ messages in thread
* [PATCH 1/3] dt-bindings: iio: stm32-adc: add support for STM32MP1.
  2018-04-18 15:37 ` Fabrice Gasnier
  (?)
@ 2018-04-18 15:37   ` Fabrice Gasnier
  -1 siblings, 0 replies; 29+ messages in thread
From: Fabrice Gasnier @ 2018-04-18 15:37 UTC (permalink / raw)
  To: jic23, robh+dt, alexandre.torgue
  Cc: mark.rutland, mcoquelin.stm32, lars, knaack.h, pmeerw,
	fabrice.gasnier, linux-iio, devicetree, linux-arm-kernel,
	linux-kernel, benjamin.gaignard

Document support for STM32MP1 ADC. It's quite similar to STM32H7 ADC.
Introduce "st,stm32mp1-adc" compatible to handle variants of this
hardware such as vregready flag, interrupts, clock rate.

Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com>
---
 Documentation/devicetree/bindings/iio/adc/st,stm32-adc.txt | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/iio/adc/st,stm32-adc.txt b/Documentation/devicetree/bindings/iio/adc/st,stm32-adc.txt
index e8bb824..9994384 100644
--- a/Documentation/devicetree/bindings/iio/adc/st,stm32-adc.txt
+++ b/Documentation/devicetree/bindings/iio/adc/st,stm32-adc.txt
@@ -24,8 +24,11 @@ Required properties:
 - compatible: Should be one of:
   "st,stm32f4-adc-core"
   "st,stm32h7-adc-core"
+  "st,stm32mp1-adc-core"
 - reg: Offset and length of the ADC block register set.
-- interrupts: Must contain the interrupt for ADC block.
+- interrupts: One or more interrupts for ADC block. Some parts like stm32f4
+  and stm32h7 share a common ADC interrupt line. stm32mp1 has separate
+  lines for each ADC within ADC block.
 - clocks: Core can use up to two clocks, depending on part used:
   - "adc" clock: for the analog circuitry, common to all ADCs.
     It's required on stm32f4.
@@ -53,6 +56,7 @@ Required properties:
 - compatible: Should be one of:
   "st,stm32f4-adc"
   "st,stm32h7-adc"
+  "st,stm32mp1-adc"
 - reg: Offset of ADC instance in ADC block (e.g. may be 0x0, 0x100, 0x200).
 - clocks: Input clock private to this ADC instance. It's required only on
   stm32f4, that has per instance clock input for registers access.
-- 
1.9.1

^ permalink raw reply related	[flat|nested] 29+ messages in thread
* [PATCH 1/3] dt-bindings: iio: stm32-adc: add support for STM32MP1.
@ 2018-04-18 15:37   ` Fabrice Gasnier
  0 siblings, 0 replies; 29+ messages in thread
From: Fabrice Gasnier @ 2018-04-18 15:37 UTC (permalink / raw)
  To: jic23, robh+dt, alexandre.torgue
  Cc: mark.rutland, mcoquelin.stm32, lars, knaack.h, pmeerw,
	fabrice.gasnier, linux-iio, devicetree, linux-arm-kernel,
	linux-kernel, benjamin.gaignard

Document support for STM32MP1 ADC. It's quite similar to STM32H7 ADC.
Introduce "st,stm32mp1-adc" compatible to handle variants of this
hardware such as vregready flag, interrupts, clock rate.

Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com>
---
 Documentation/devicetree/bindings/iio/adc/st,stm32-adc.txt | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/iio/adc/st,stm32-adc.txt b/Documentation/devicetree/bindings/iio/adc/st,stm32-adc.txt
index e8bb824..9994384 100644
--- a/Documentation/devicetree/bindings/iio/adc/st,stm32-adc.txt
+++ b/Documentation/devicetree/bindings/iio/adc/st,stm32-adc.txt
@@ -24,8 +24,11 @@ Required properties:
 - compatible: Should be one of:
   "st,stm32f4-adc-core"
   "st,stm32h7-adc-core"
+  "st,stm32mp1-adc-core"
 - reg: Offset and length of the ADC block register set.
-- interrupts: Must contain the interrupt for ADC block.
+- interrupts: One or more interrupts for ADC block. Some parts like stm32f4
+  and stm32h7 share a common ADC interrupt line. stm32mp1 has separate
+  lines for each ADC within ADC block.
 - clocks: Core can use up to two clocks, depending on part used:
   - "adc" clock: for the analog circuitry, common to all ADCs.
     It's required on stm32f4.
@@ -53,6 +56,7 @@ Required properties:
 - compatible: Should be one of:
   "st,stm32f4-adc"
   "st,stm32h7-adc"
+  "st,stm32mp1-adc"
 - reg: Offset of ADC instance in ADC block (e.g. may be 0x0, 0x100, 0x200).
 - clocks: Input clock private to this ADC instance. It's required only on
   stm32f4, that has per instance clock input for registers access.
-- 
1.9.1

^ permalink raw reply related	[flat|nested] 29+ messages in thread
* [PATCH 1/3] dt-bindings: iio: stm32-adc: add support for STM32MP1.
@ 2018-04-18 15:37   ` Fabrice Gasnier
  0 siblings, 0 replies; 29+ messages in thread
From: Fabrice Gasnier @ 2018-04-18 15:37 UTC (permalink / raw)
  To: linux-arm-kernel

Document support for STM32MP1 ADC. It's quite similar to STM32H7 ADC.
Introduce "st,stm32mp1-adc" compatible to handle variants of this
hardware such as vregready flag, interrupts, clock rate.

Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com>
---
 Documentation/devicetree/bindings/iio/adc/st,stm32-adc.txt | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/iio/adc/st,stm32-adc.txt b/Documentation/devicetree/bindings/iio/adc/st,stm32-adc.txt
index e8bb824..9994384 100644
--- a/Documentation/devicetree/bindings/iio/adc/st,stm32-adc.txt
+++ b/Documentation/devicetree/bindings/iio/adc/st,stm32-adc.txt
@@ -24,8 +24,11 @@ Required properties:
 - compatible: Should be one of:
   "st,stm32f4-adc-core"
   "st,stm32h7-adc-core"
+  "st,stm32mp1-adc-core"
 - reg: Offset and length of the ADC block register set.
-- interrupts: Must contain the interrupt for ADC block.
+- interrupts: One or more interrupts for ADC block. Some parts like stm32f4
+  and stm32h7 share a common ADC interrupt line. stm32mp1 has separate
+  lines for each ADC within ADC block.
 - clocks: Core can use up to two clocks, depending on part used:
   - "adc" clock: for the analog circuitry, common to all ADCs.
     It's required on stm32f4.
@@ -53,6 +56,7 @@ Required properties:
 - compatible: Should be one of:
   "st,stm32f4-adc"
   "st,stm32h7-adc"
+  "st,stm32mp1-adc"
 - reg: Offset of ADC instance in ADC block (e.g. may be 0x0, 0x100, 0x200).
 - clocks: Input clock private to this ADC instance. It's required only on
   stm32f4, that has per instance clock input for registers access.
-- 
1.9.1

^ permalink raw reply related	[flat|nested] 29+ messages in thread
* [PATCH 2/3] iio: adc: stm32-adc: add support for STM32MP1
  2018-04-18 15:37 ` Fabrice Gasnier
  (?)
@ 2018-04-18 15:37   ` Fabrice Gasnier
  -1 siblings, 0 replies; 29+ messages in thread
From: Fabrice Gasnier @ 2018-04-18 15:37 UTC (permalink / raw)
  To: jic23, robh+dt, alexandre.torgue
  Cc: mark.rutland, mcoquelin.stm32, lars, knaack.h, pmeerw,
	fabrice.gasnier, linux-iio, devicetree, linux-arm-kernel,
	linux-kernel, benjamin.gaignard

Add support for STM32MP1 ADC. It's quite similar to STM32H7 ADC.
Introduce new compatible to handle variants of this hardware such as
vregready flag, trigger list, interrupts, clock rate.

Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com>
---
 drivers/iio/adc/stm32-adc-core.c | 66 +++++++++++++++++++++++++++++-----------
 drivers/iio/adc/stm32-adc.c      | 47 +++++++++++++++++++++++++---
 2 files changed, 91 insertions(+), 22 deletions(-)

diff --git a/drivers/iio/adc/stm32-adc-core.c b/drivers/iio/adc/stm32-adc-core.c
index 40be7d9..ca432e7 100644
--- a/drivers/iio/adc/stm32-adc-core.c
+++ b/drivers/iio/adc/stm32-adc-core.c
@@ -34,9 +34,6 @@
 #define STM32F4_ADC_ADCPRE_SHIFT	16
 #define STM32F4_ADC_ADCPRE_MASK		GENMASK(17, 16)
 
-/* STM32 F4 maximum analog clock rate (from datasheet) */
-#define STM32F4_ADC_MAX_CLK_RATE	36000000
-
 /* STM32H7 - common registers for all ADC instances */
 #define STM32H7_ADC_CSR			(STM32_ADCX_COMN_OFFSET + 0x00)
 #define STM32H7_ADC_CCR			(STM32_ADCX_COMN_OFFSET + 0x08)
@@ -51,9 +48,6 @@
 #define STM32H7_CKMODE_SHIFT		16
 #define STM32H7_CKMODE_MASK		GENMASK(17, 16)
 
-/* STM32 H7 maximum analog clock rate (from datasheet) */
-#define STM32H7_ADC_MAX_CLK_RATE	36000000
-
 /**
  * stm32_adc_common_regs - stm32 common registers, compatible dependent data
  * @csr:	common status register offset
@@ -74,15 +68,17 @@ struct stm32_adc_common_regs {
  * stm32_adc_priv_cfg - stm32 core compatible configuration data
  * @regs:	common registers for all instances
  * @clk_sel:	clock selection routine
+ * @max_clk_rate_hz: maximum analog clock rate (Hz, from datasheet)
  */
 struct stm32_adc_priv_cfg {
 	const struct stm32_adc_common_regs *regs;
 	int (*clk_sel)(struct platform_device *, struct stm32_adc_priv *);
+	u32 max_clk_rate_hz;
 };
 
 /**
  * struct stm32_adc_priv - stm32 ADC core private data
- * @irq:		irq for ADC block
+ * @irq:		irq(s) for ADC block
  * @domain:		irq domain reference
  * @aclk:		clock reference for the analog circuitry
  * @bclk:		bus clock common for all ADCs, depends on part used
@@ -91,7 +87,7 @@ struct stm32_adc_priv_cfg {
  * @common:		common data for all ADC instances
  */
 struct stm32_adc_priv {
-	int				irq;
+	int				irq[STM32_ADC_MAX_ADCS];
 	struct irq_domain		*domain;
 	struct clk			*aclk;
 	struct clk			*bclk;
@@ -133,7 +129,7 @@ static int stm32f4_adc_clk_sel(struct platform_device *pdev,
 	}
 
 	for (i = 0; i < ARRAY_SIZE(stm32f4_pclk_div); i++) {
-		if ((rate / stm32f4_pclk_div[i]) <= STM32F4_ADC_MAX_CLK_RATE)
+		if ((rate / stm32f4_pclk_div[i]) <= priv->cfg->max_clk_rate_hz)
 			break;
 	}
 	if (i >= ARRAY_SIZE(stm32f4_pclk_div)) {
@@ -222,7 +218,7 @@ static int stm32h7_adc_clk_sel(struct platform_device *pdev,
 			if (ckmode)
 				continue;
 
-			if ((rate / div) <= STM32H7_ADC_MAX_CLK_RATE)
+			if ((rate / div) <= priv->cfg->max_clk_rate_hz)
 				goto out;
 		}
 	}
@@ -242,7 +238,7 @@ static int stm32h7_adc_clk_sel(struct platform_device *pdev,
 		if (!ckmode)
 			continue;
 
-		if ((rate / div) <= STM32H7_ADC_MAX_CLK_RATE)
+		if ((rate / div) <= priv->cfg->max_clk_rate_hz)
 			goto out;
 	}
 
@@ -328,11 +324,24 @@ static int stm32_adc_irq_probe(struct platform_device *pdev,
 			       struct stm32_adc_priv *priv)
 {
 	struct device_node *np = pdev->dev.of_node;
+	unsigned int i;
+
+	for (i = 0; i < STM32_ADC_MAX_ADCS; i++) {
+		priv->irq[i] = platform_get_irq(pdev, i);
+		if (priv->irq[i] < 0) {
+			/*
+			 * At least one interrupt must be provided, make others
+			 * optional:
+			 * - stm32f4/h7 shares a common interrupt.
+			 * - stm32mp1, has one line per ADC (either for ADC1,
+			 *   ADC2 or both).
+			 */
+			if (i && priv->irq[i] == -ENXIO)
+				continue;
+			dev_err(&pdev->dev, "failed to get irq\n");
 
-	priv->irq = platform_get_irq(pdev, 0);
-	if (priv->irq < 0) {
-		dev_err(&pdev->dev, "failed to get irq\n");
-		return priv->irq;
+			return priv->irq[i];
+		}
 	}
 
 	priv->domain = irq_domain_add_simple(np, STM32_ADC_MAX_ADCS, 0,
@@ -343,8 +352,12 @@ static int stm32_adc_irq_probe(struct platform_device *pdev,
 		return -ENOMEM;
 	}
 
-	irq_set_chained_handler(priv->irq, stm32_adc_irq_handler);
-	irq_set_handler_data(priv->irq, priv);
+	for (i = 0; i < STM32_ADC_MAX_ADCS; i++) {
+		if (priv->irq[i] < 0)
+			continue;
+		irq_set_chained_handler(priv->irq[i], stm32_adc_irq_handler);
+		irq_set_handler_data(priv->irq[i], priv);
+	}
 
 	return 0;
 }
@@ -353,11 +366,17 @@ static void stm32_adc_irq_remove(struct platform_device *pdev,
 				 struct stm32_adc_priv *priv)
 {
 	int hwirq;
+	unsigned int i;
 
 	for (hwirq = 0; hwirq < STM32_ADC_MAX_ADCS; hwirq++)
 		irq_dispose_mapping(irq_find_mapping(priv->domain, hwirq));
 	irq_domain_remove(priv->domain);
-	irq_set_chained_handler(priv->irq, NULL);
+
+	for (i = 0; i < STM32_ADC_MAX_ADCS; i++) {
+		if (priv->irq[i] < 0)
+			continue;
+		irq_set_chained_handler(priv->irq[i], NULL);
+	}
 }
 
 static int stm32_adc_probe(struct platform_device *pdev)
@@ -497,11 +516,19 @@ static int stm32_adc_remove(struct platform_device *pdev)
 static const struct stm32_adc_priv_cfg stm32f4_adc_priv_cfg = {
 	.regs = &stm32f4_adc_common_regs,
 	.clk_sel = stm32f4_adc_clk_sel,
+	.max_clk_rate_hz = 36000000,
 };
 
 static const struct stm32_adc_priv_cfg stm32h7_adc_priv_cfg = {
 	.regs = &stm32h7_adc_common_regs,
 	.clk_sel = stm32h7_adc_clk_sel,
+	.max_clk_rate_hz = 36000000,
+};
+
+static const struct stm32_adc_priv_cfg stm32mp1_adc_priv_cfg = {
+	.regs = &stm32h7_adc_common_regs,
+	.clk_sel = stm32h7_adc_clk_sel,
+	.max_clk_rate_hz = 40000000,
 };
 
 static const struct of_device_id stm32_adc_of_match[] = {
@@ -512,6 +539,9 @@ static int stm32_adc_remove(struct platform_device *pdev)
 		.compatible = "st,stm32h7-adc-core",
 		.data = (void *)&stm32h7_adc_priv_cfg
 	}, {
+		.compatible = "st,stm32mp1-adc-core",
+		.data = (void *)&stm32mp1_adc_priv_cfg
+	}, {
 	},
 };
 MODULE_DEVICE_TABLE(of, stm32_adc_of_match);
diff --git a/drivers/iio/adc/stm32-adc.c b/drivers/iio/adc/stm32-adc.c
index 9a2583ca..3784118 100644
--- a/drivers/iio/adc/stm32-adc.c
+++ b/drivers/iio/adc/stm32-adc.c
@@ -84,6 +84,7 @@
 #define STM32H7_ADC_CALFACT2		0xC8
 
 /* STM32H7_ADC_ISR - bit fields */
+#define STM32MP1_VREGREADY		BIT(12)
 #define STM32H7_EOC			BIT(2)
 #define STM32H7_ADRDY			BIT(0)
 
@@ -249,6 +250,7 @@ struct stm32_adc_regspec {
  * @adc_info:		per instance input channels definitions
  * @trigs:		external trigger sources
  * @clk_required:	clock is required
+ * @has_vregready:	vregready status flag presence
  * @selfcalib:		optional routine for self-calibration
  * @prepare:		optional prepare routine (power-up, enable)
  * @start_conv:		routine to start conversions
@@ -261,6 +263,7 @@ struct stm32_adc_cfg {
 	const struct stm32_adc_info	*adc_info;
 	struct stm32_adc_trig_info	*trigs;
 	bool clk_required;
+	bool has_vregready;
 	int (*selfcalib)(struct stm32_adc *);
 	int (*prepare)(struct stm32_adc *);
 	void (*start_conv)(struct stm32_adc *, bool dma);
@@ -695,8 +698,12 @@ static void stm32h7_adc_stop_conv(struct stm32_adc *adc)
 	stm32_adc_clr_bits(adc, STM32H7_ADC_CFGR, STM32H7_DMNGT_MASK);
 }
 
-static void stm32h7_adc_exit_pwr_down(struct stm32_adc *adc)
+static int stm32h7_adc_exit_pwr_down(struct stm32_adc *adc)
 {
+	struct iio_dev *indio_dev = iio_priv_to_dev(adc);
+	int ret;
+	u32 val;
+
 	/* Exit deep power down, then enable ADC voltage regulator */
 	stm32_adc_clr_bits(adc, STM32H7_ADC_CR, STM32H7_DEEPPWD);
 	stm32_adc_set_bits(adc, STM32H7_ADC_CR, STM32H7_ADVREGEN);
@@ -705,7 +712,20 @@ static void stm32h7_adc_exit_pwr_down(struct stm32_adc *adc)
 		stm32_adc_set_bits(adc, STM32H7_ADC_CR, STM32H7_BOOST);
 
 	/* Wait for startup time */
-	usleep_range(10, 20);
+	if (!adc->cfg->has_vregready) {
+		usleep_range(10, 20);
+		return 0;
+	}
+
+	ret = stm32_adc_readl_poll_timeout(STM32H7_ADC_ISR, val,
+					   val & STM32MP1_VREGREADY, 100,
+					   STM32_ADC_TIMEOUT_US);
+	if (ret) {
+		stm32_adc_set_bits(adc, STM32H7_ADC_CR, STM32H7_DEEPPWD);
+		dev_err(&indio_dev->dev, "Failed to exit power down\n");
+	}
+
+	return ret;
 }
 
 static void stm32h7_adc_enter_pwr_down(struct stm32_adc *adc)
@@ -888,7 +908,9 @@ static int stm32h7_adc_selfcalib(struct stm32_adc *adc)
 	int ret;
 	u32 val;
 
-	stm32h7_adc_exit_pwr_down(adc);
+	ret = stm32h7_adc_exit_pwr_down(adc);
+	if (ret)
+		return ret;
 
 	/*
 	 * Select calibration mode:
@@ -952,7 +974,10 @@ static int stm32h7_adc_prepare(struct stm32_adc *adc)
 {
 	int ret;
 
-	stm32h7_adc_exit_pwr_down(adc);
+	ret = stm32h7_adc_exit_pwr_down(adc);
+	if (ret)
+		return ret;
+
 	stm32_adc_writel(adc, STM32H7_ADC_DIFSEL, adc->difsel);
 
 	ret = stm32h7_adc_enable(adc);
@@ -1944,9 +1969,23 @@ static int stm32_adc_remove(struct platform_device *pdev)
 	.smp_cycles = stm32h7_adc_smp_cycles,
 };
 
+static const struct stm32_adc_cfg stm32mp1_adc_cfg = {
+	.regs = &stm32h7_adc_regspec,
+	.adc_info = &stm32h7_adc_info,
+	.trigs = stm32h7_adc_trigs,
+	.has_vregready = true,
+	.selfcalib = stm32h7_adc_selfcalib,
+	.start_conv = stm32h7_adc_start_conv,
+	.stop_conv = stm32h7_adc_stop_conv,
+	.prepare = stm32h7_adc_prepare,
+	.unprepare = stm32h7_adc_unprepare,
+	.smp_cycles = stm32h7_adc_smp_cycles,
+};
+
 static const struct of_device_id stm32_adc_of_match[] = {
 	{ .compatible = "st,stm32f4-adc", .data = (void *)&stm32f4_adc_cfg },
 	{ .compatible = "st,stm32h7-adc", .data = (void *)&stm32h7_adc_cfg },
+	{ .compatible = "st,stm32mp1-adc", .data = (void *)&stm32mp1_adc_cfg },
 	{},
 };
 MODULE_DEVICE_TABLE(of, stm32_adc_of_match);
-- 
1.9.1

^ permalink raw reply related	[flat|nested] 29+ messages in thread
* [PATCH 2/3] iio: adc: stm32-adc: add support for STM32MP1
@ 2018-04-18 15:37   ` Fabrice Gasnier
  0 siblings, 0 replies; 29+ messages in thread
From: Fabrice Gasnier @ 2018-04-18 15:37 UTC (permalink / raw)
  To: jic23, robh+dt, alexandre.torgue
  Cc: mark.rutland, mcoquelin.stm32, lars, knaack.h, pmeerw,
	fabrice.gasnier, linux-iio, devicetree, linux-arm-kernel,
	linux-kernel, benjamin.gaignard

Add support for STM32MP1 ADC. It's quite similar to STM32H7 ADC.
Introduce new compatible to handle variants of this hardware such as
vregready flag, trigger list, interrupts, clock rate.

Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com>
---
 drivers/iio/adc/stm32-adc-core.c | 66 +++++++++++++++++++++++++++++-----------
 drivers/iio/adc/stm32-adc.c      | 47 +++++++++++++++++++++++++---
 2 files changed, 91 insertions(+), 22 deletions(-)

diff --git a/drivers/iio/adc/stm32-adc-core.c b/drivers/iio/adc/stm32-adc-core.c
index 40be7d9..ca432e7 100644
--- a/drivers/iio/adc/stm32-adc-core.c
+++ b/drivers/iio/adc/stm32-adc-core.c
@@ -34,9 +34,6 @@
 #define STM32F4_ADC_ADCPRE_SHIFT	16
 #define STM32F4_ADC_ADCPRE_MASK		GENMASK(17, 16)
 
-/* STM32 F4 maximum analog clock rate (from datasheet) */
-#define STM32F4_ADC_MAX_CLK_RATE	36000000
-
 /* STM32H7 - common registers for all ADC instances */
 #define STM32H7_ADC_CSR			(STM32_ADCX_COMN_OFFSET + 0x00)
 #define STM32H7_ADC_CCR			(STM32_ADCX_COMN_OFFSET + 0x08)
@@ -51,9 +48,6 @@
 #define STM32H7_CKMODE_SHIFT		16
 #define STM32H7_CKMODE_MASK		GENMASK(17, 16)
 
-/* STM32 H7 maximum analog clock rate (from datasheet) */
-#define STM32H7_ADC_MAX_CLK_RATE	36000000
-
 /**
  * stm32_adc_common_regs - stm32 common registers, compatible dependent data
  * @csr:	common status register offset
@@ -74,15 +68,17 @@ struct stm32_adc_common_regs {
  * stm32_adc_priv_cfg - stm32 core compatible configuration data
  * @regs:	common registers for all instances
  * @clk_sel:	clock selection routine
+ * @max_clk_rate_hz: maximum analog clock rate (Hz, from datasheet)
  */
 struct stm32_adc_priv_cfg {
 	const struct stm32_adc_common_regs *regs;
 	int (*clk_sel)(struct platform_device *, struct stm32_adc_priv *);
+	u32 max_clk_rate_hz;
 };
 
 /**
  * struct stm32_adc_priv - stm32 ADC core private data
- * @irq:		irq for ADC block
+ * @irq:		irq(s) for ADC block
  * @domain:		irq domain reference
  * @aclk:		clock reference for the analog circuitry
  * @bclk:		bus clock common for all ADCs, depends on part used
@@ -91,7 +87,7 @@ struct stm32_adc_priv_cfg {
  * @common:		common data for all ADC instances
  */
 struct stm32_adc_priv {
-	int				irq;
+	int				irq[STM32_ADC_MAX_ADCS];
 	struct irq_domain		*domain;
 	struct clk			*aclk;
 	struct clk			*bclk;
@@ -133,7 +129,7 @@ static int stm32f4_adc_clk_sel(struct platform_device *pdev,
 	}
 
 	for (i = 0; i < ARRAY_SIZE(stm32f4_pclk_div); i++) {
-		if ((rate / stm32f4_pclk_div[i]) <= STM32F4_ADC_MAX_CLK_RATE)
+		if ((rate / stm32f4_pclk_div[i]) <= priv->cfg->max_clk_rate_hz)
 			break;
 	}
 	if (i >= ARRAY_SIZE(stm32f4_pclk_div)) {
@@ -222,7 +218,7 @@ static int stm32h7_adc_clk_sel(struct platform_device *pdev,
 			if (ckmode)
 				continue;
 
-			if ((rate / div) <= STM32H7_ADC_MAX_CLK_RATE)
+			if ((rate / div) <= priv->cfg->max_clk_rate_hz)
 				goto out;
 		}
 	}
@@ -242,7 +238,7 @@ static int stm32h7_adc_clk_sel(struct platform_device *pdev,
 		if (!ckmode)
 			continue;
 
-		if ((rate / div) <= STM32H7_ADC_MAX_CLK_RATE)
+		if ((rate / div) <= priv->cfg->max_clk_rate_hz)
 			goto out;
 	}
 
@@ -328,11 +324,24 @@ static int stm32_adc_irq_probe(struct platform_device *pdev,
 			       struct stm32_adc_priv *priv)
 {
 	struct device_node *np = pdev->dev.of_node;
+	unsigned int i;
+
+	for (i = 0; i < STM32_ADC_MAX_ADCS; i++) {
+		priv->irq[i] = platform_get_irq(pdev, i);
+		if (priv->irq[i] < 0) {
+			/*
+			 * At least one interrupt must be provided, make others
+			 * optional:
+			 * - stm32f4/h7 shares a common interrupt.
+			 * - stm32mp1, has one line per ADC (either for ADC1,
+			 *   ADC2 or both).
+			 */
+			if (i && priv->irq[i] == -ENXIO)
+				continue;
+			dev_err(&pdev->dev, "failed to get irq\n");
 
-	priv->irq = platform_get_irq(pdev, 0);
-	if (priv->irq < 0) {
-		dev_err(&pdev->dev, "failed to get irq\n");
-		return priv->irq;
+			return priv->irq[i];
+		}
 	}
 
 	priv->domain = irq_domain_add_simple(np, STM32_ADC_MAX_ADCS, 0,
@@ -343,8 +352,12 @@ static int stm32_adc_irq_probe(struct platform_device *pdev,
 		return -ENOMEM;
 	}
 
-	irq_set_chained_handler(priv->irq, stm32_adc_irq_handler);
-	irq_set_handler_data(priv->irq, priv);
+	for (i = 0; i < STM32_ADC_MAX_ADCS; i++) {
+		if (priv->irq[i] < 0)
+			continue;
+		irq_set_chained_handler(priv->irq[i], stm32_adc_irq_handler);
+		irq_set_handler_data(priv->irq[i], priv);
+	}
 
 	return 0;
 }
@@ -353,11 +366,17 @@ static void stm32_adc_irq_remove(struct platform_device *pdev,
 				 struct stm32_adc_priv *priv)
 {
 	int hwirq;
+	unsigned int i;
 
 	for (hwirq = 0; hwirq < STM32_ADC_MAX_ADCS; hwirq++)
 		irq_dispose_mapping(irq_find_mapping(priv->domain, hwirq));
 	irq_domain_remove(priv->domain);
-	irq_set_chained_handler(priv->irq, NULL);
+
+	for (i = 0; i < STM32_ADC_MAX_ADCS; i++) {
+		if (priv->irq[i] < 0)
+			continue;
+		irq_set_chained_handler(priv->irq[i], NULL);
+	}
 }
 
 static int stm32_adc_probe(struct platform_device *pdev)
@@ -497,11 +516,19 @@ static int stm32_adc_remove(struct platform_device *pdev)
 static const struct stm32_adc_priv_cfg stm32f4_adc_priv_cfg = {
 	.regs = &stm32f4_adc_common_regs,
 	.clk_sel = stm32f4_adc_clk_sel,
+	.max_clk_rate_hz = 36000000,
 };
 
 static const struct stm32_adc_priv_cfg stm32h7_adc_priv_cfg = {
 	.regs = &stm32h7_adc_common_regs,
 	.clk_sel = stm32h7_adc_clk_sel,
+	.max_clk_rate_hz = 36000000,
+};
+
+static const struct stm32_adc_priv_cfg stm32mp1_adc_priv_cfg = {
+	.regs = &stm32h7_adc_common_regs,
+	.clk_sel = stm32h7_adc_clk_sel,
+	.max_clk_rate_hz = 40000000,
 };
 
 static const struct of_device_id stm32_adc_of_match[] = {
@@ -512,6 +539,9 @@ static int stm32_adc_remove(struct platform_device *pdev)
 		.compatible = "st,stm32h7-adc-core",
 		.data = (void *)&stm32h7_adc_priv_cfg
 	}, {
+		.compatible = "st,stm32mp1-adc-core",
+		.data = (void *)&stm32mp1_adc_priv_cfg
+	}, {
 	},
 };
 MODULE_DEVICE_TABLE(of, stm32_adc_of_match);
diff --git a/drivers/iio/adc/stm32-adc.c b/drivers/iio/adc/stm32-adc.c
index 9a2583ca..3784118 100644
--- a/drivers/iio/adc/stm32-adc.c
+++ b/drivers/iio/adc/stm32-adc.c
@@ -84,6 +84,7 @@
 #define STM32H7_ADC_CALFACT2		0xC8
 
 /* STM32H7_ADC_ISR - bit fields */
+#define STM32MP1_VREGREADY		BIT(12)
 #define STM32H7_EOC			BIT(2)
 #define STM32H7_ADRDY			BIT(0)
 
@@ -249,6 +250,7 @@ struct stm32_adc_regspec {
  * @adc_info:		per instance input channels definitions
  * @trigs:		external trigger sources
  * @clk_required:	clock is required
+ * @has_vregready:	vregready status flag presence
  * @selfcalib:		optional routine for self-calibration
  * @prepare:		optional prepare routine (power-up, enable)
  * @start_conv:		routine to start conversions
@@ -261,6 +263,7 @@ struct stm32_adc_cfg {
 	const struct stm32_adc_info	*adc_info;
 	struct stm32_adc_trig_info	*trigs;
 	bool clk_required;
+	bool has_vregready;
 	int (*selfcalib)(struct stm32_adc *);
 	int (*prepare)(struct stm32_adc *);
 	void (*start_conv)(struct stm32_adc *, bool dma);
@@ -695,8 +698,12 @@ static void stm32h7_adc_stop_conv(struct stm32_adc *adc)
 	stm32_adc_clr_bits(adc, STM32H7_ADC_CFGR, STM32H7_DMNGT_MASK);
 }
 
-static void stm32h7_adc_exit_pwr_down(struct stm32_adc *adc)
+static int stm32h7_adc_exit_pwr_down(struct stm32_adc *adc)
 {
+	struct iio_dev *indio_dev = iio_priv_to_dev(adc);
+	int ret;
+	u32 val;
+
 	/* Exit deep power down, then enable ADC voltage regulator */
 	stm32_adc_clr_bits(adc, STM32H7_ADC_CR, STM32H7_DEEPPWD);
 	stm32_adc_set_bits(adc, STM32H7_ADC_CR, STM32H7_ADVREGEN);
@@ -705,7 +712,20 @@ static void stm32h7_adc_exit_pwr_down(struct stm32_adc *adc)
 		stm32_adc_set_bits(adc, STM32H7_ADC_CR, STM32H7_BOOST);
 
 	/* Wait for startup time */
-	usleep_range(10, 20);
+	if (!adc->cfg->has_vregready) {
+		usleep_range(10, 20);
+		return 0;
+	}
+
+	ret = stm32_adc_readl_poll_timeout(STM32H7_ADC_ISR, val,
+					   val & STM32MP1_VREGREADY, 100,
+					   STM32_ADC_TIMEOUT_US);
+	if (ret) {
+		stm32_adc_set_bits(adc, STM32H7_ADC_CR, STM32H7_DEEPPWD);
+		dev_err(&indio_dev->dev, "Failed to exit power down\n");
+	}
+
+	return ret;
 }
 
 static void stm32h7_adc_enter_pwr_down(struct stm32_adc *adc)
@@ -888,7 +908,9 @@ static int stm32h7_adc_selfcalib(struct stm32_adc *adc)
 	int ret;
 	u32 val;
 
-	stm32h7_adc_exit_pwr_down(adc);
+	ret = stm32h7_adc_exit_pwr_down(adc);
+	if (ret)
+		return ret;
 
 	/*
 	 * Select calibration mode:
@@ -952,7 +974,10 @@ static int stm32h7_adc_prepare(struct stm32_adc *adc)
 {
 	int ret;
 
-	stm32h7_adc_exit_pwr_down(adc);
+	ret = stm32h7_adc_exit_pwr_down(adc);
+	if (ret)
+		return ret;
+
 	stm32_adc_writel(adc, STM32H7_ADC_DIFSEL, adc->difsel);
 
 	ret = stm32h7_adc_enable(adc);
@@ -1944,9 +1969,23 @@ static int stm32_adc_remove(struct platform_device *pdev)
 	.smp_cycles = stm32h7_adc_smp_cycles,
 };
 
+static const struct stm32_adc_cfg stm32mp1_adc_cfg = {
+	.regs = &stm32h7_adc_regspec,
+	.adc_info = &stm32h7_adc_info,
+	.trigs = stm32h7_adc_trigs,
+	.has_vregready = true,
+	.selfcalib = stm32h7_adc_selfcalib,
+	.start_conv = stm32h7_adc_start_conv,
+	.stop_conv = stm32h7_adc_stop_conv,
+	.prepare = stm32h7_adc_prepare,
+	.unprepare = stm32h7_adc_unprepare,
+	.smp_cycles = stm32h7_adc_smp_cycles,
+};
+
 static const struct of_device_id stm32_adc_of_match[] = {
 	{ .compatible = "st,stm32f4-adc", .data = (void *)&stm32f4_adc_cfg },
 	{ .compatible = "st,stm32h7-adc", .data = (void *)&stm32h7_adc_cfg },
+	{ .compatible = "st,stm32mp1-adc", .data = (void *)&stm32mp1_adc_cfg },
 	{},
 };
 MODULE_DEVICE_TABLE(of, stm32_adc_of_match);
-- 
1.9.1

^ permalink raw reply related	[flat|nested] 29+ messages in thread
* [PATCH 2/3] iio: adc: stm32-adc: add support for STM32MP1
@ 2018-04-18 15:37   ` Fabrice Gasnier
  0 siblings, 0 replies; 29+ messages in thread
From: Fabrice Gasnier @ 2018-04-18 15:37 UTC (permalink / raw)
  To: linux-arm-kernel

Add support for STM32MP1 ADC. It's quite similar to STM32H7 ADC.
Introduce new compatible to handle variants of this hardware such as
vregready flag, trigger list, interrupts, clock rate.

Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com>
---
 drivers/iio/adc/stm32-adc-core.c | 66 +++++++++++++++++++++++++++++-----------
 drivers/iio/adc/stm32-adc.c      | 47 +++++++++++++++++++++++++---
 2 files changed, 91 insertions(+), 22 deletions(-)

diff --git a/drivers/iio/adc/stm32-adc-core.c b/drivers/iio/adc/stm32-adc-core.c
index 40be7d9..ca432e7 100644
--- a/drivers/iio/adc/stm32-adc-core.c
+++ b/drivers/iio/adc/stm32-adc-core.c
@@ -34,9 +34,6 @@
 #define STM32F4_ADC_ADCPRE_SHIFT	16
 #define STM32F4_ADC_ADCPRE_MASK		GENMASK(17, 16)
 
-/* STM32 F4 maximum analog clock rate (from datasheet) */
-#define STM32F4_ADC_MAX_CLK_RATE	36000000
-
 /* STM32H7 - common registers for all ADC instances */
 #define STM32H7_ADC_CSR			(STM32_ADCX_COMN_OFFSET + 0x00)
 #define STM32H7_ADC_CCR			(STM32_ADCX_COMN_OFFSET + 0x08)
@@ -51,9 +48,6 @@
 #define STM32H7_CKMODE_SHIFT		16
 #define STM32H7_CKMODE_MASK		GENMASK(17, 16)
 
-/* STM32 H7 maximum analog clock rate (from datasheet) */
-#define STM32H7_ADC_MAX_CLK_RATE	36000000
-
 /**
  * stm32_adc_common_regs - stm32 common registers, compatible dependent data
  * @csr:	common status register offset
@@ -74,15 +68,17 @@ struct stm32_adc_common_regs {
  * stm32_adc_priv_cfg - stm32 core compatible configuration data
  * @regs:	common registers for all instances
  * @clk_sel:	clock selection routine
+ * @max_clk_rate_hz: maximum analog clock rate (Hz, from datasheet)
  */
 struct stm32_adc_priv_cfg {
 	const struct stm32_adc_common_regs *regs;
 	int (*clk_sel)(struct platform_device *, struct stm32_adc_priv *);
+	u32 max_clk_rate_hz;
 };
 
 /**
  * struct stm32_adc_priv - stm32 ADC core private data
- * @irq:		irq for ADC block
+ * @irq:		irq(s) for ADC block
  * @domain:		irq domain reference
  * @aclk:		clock reference for the analog circuitry
  * @bclk:		bus clock common for all ADCs, depends on part used
@@ -91,7 +87,7 @@ struct stm32_adc_priv_cfg {
  * @common:		common data for all ADC instances
  */
 struct stm32_adc_priv {
-	int				irq;
+	int				irq[STM32_ADC_MAX_ADCS];
 	struct irq_domain		*domain;
 	struct clk			*aclk;
 	struct clk			*bclk;
@@ -133,7 +129,7 @@ static int stm32f4_adc_clk_sel(struct platform_device *pdev,
 	}
 
 	for (i = 0; i < ARRAY_SIZE(stm32f4_pclk_div); i++) {
-		if ((rate / stm32f4_pclk_div[i]) <= STM32F4_ADC_MAX_CLK_RATE)
+		if ((rate / stm32f4_pclk_div[i]) <= priv->cfg->max_clk_rate_hz)
 			break;
 	}
 	if (i >= ARRAY_SIZE(stm32f4_pclk_div)) {
@@ -222,7 +218,7 @@ static int stm32h7_adc_clk_sel(struct platform_device *pdev,
 			if (ckmode)
 				continue;
 
-			if ((rate / div) <= STM32H7_ADC_MAX_CLK_RATE)
+			if ((rate / div) <= priv->cfg->max_clk_rate_hz)
 				goto out;
 		}
 	}
@@ -242,7 +238,7 @@ static int stm32h7_adc_clk_sel(struct platform_device *pdev,
 		if (!ckmode)
 			continue;
 
-		if ((rate / div) <= STM32H7_ADC_MAX_CLK_RATE)
+		if ((rate / div) <= priv->cfg->max_clk_rate_hz)
 			goto out;
 	}
 
@@ -328,11 +324,24 @@ static int stm32_adc_irq_probe(struct platform_device *pdev,
 			       struct stm32_adc_priv *priv)
 {
 	struct device_node *np = pdev->dev.of_node;
+	unsigned int i;
+
+	for (i = 0; i < STM32_ADC_MAX_ADCS; i++) {
+		priv->irq[i] = platform_get_irq(pdev, i);
+		if (priv->irq[i] < 0) {
+			/*
+			 * At least one interrupt must be provided, make others
+			 * optional:
+			 * - stm32f4/h7 shares a common interrupt.
+			 * - stm32mp1, has one line per ADC (either for ADC1,
+			 *   ADC2 or both).
+			 */
+			if (i && priv->irq[i] == -ENXIO)
+				continue;
+			dev_err(&pdev->dev, "failed to get irq\n");
 
-	priv->irq = platform_get_irq(pdev, 0);
-	if (priv->irq < 0) {
-		dev_err(&pdev->dev, "failed to get irq\n");
-		return priv->irq;
+			return priv->irq[i];
+		}
 	}
 
 	priv->domain = irq_domain_add_simple(np, STM32_ADC_MAX_ADCS, 0,
@@ -343,8 +352,12 @@ static int stm32_adc_irq_probe(struct platform_device *pdev,
 		return -ENOMEM;
 	}
 
-	irq_set_chained_handler(priv->irq, stm32_adc_irq_handler);
-	irq_set_handler_data(priv->irq, priv);
+	for (i = 0; i < STM32_ADC_MAX_ADCS; i++) {
+		if (priv->irq[i] < 0)
+			continue;
+		irq_set_chained_handler(priv->irq[i], stm32_adc_irq_handler);
+		irq_set_handler_data(priv->irq[i], priv);
+	}
 
 	return 0;
 }
@@ -353,11 +366,17 @@ static void stm32_adc_irq_remove(struct platform_device *pdev,
 				 struct stm32_adc_priv *priv)
 {
 	int hwirq;
+	unsigned int i;
 
 	for (hwirq = 0; hwirq < STM32_ADC_MAX_ADCS; hwirq++)
 		irq_dispose_mapping(irq_find_mapping(priv->domain, hwirq));
 	irq_domain_remove(priv->domain);
-	irq_set_chained_handler(priv->irq, NULL);
+
+	for (i = 0; i < STM32_ADC_MAX_ADCS; i++) {
+		if (priv->irq[i] < 0)
+			continue;
+		irq_set_chained_handler(priv->irq[i], NULL);
+	}
 }
 
 static int stm32_adc_probe(struct platform_device *pdev)
@@ -497,11 +516,19 @@ static int stm32_adc_remove(struct platform_device *pdev)
 static const struct stm32_adc_priv_cfg stm32f4_adc_priv_cfg = {
 	.regs = &stm32f4_adc_common_regs,
 	.clk_sel = stm32f4_adc_clk_sel,
+	.max_clk_rate_hz = 36000000,
 };
 
 static const struct stm32_adc_priv_cfg stm32h7_adc_priv_cfg = {
 	.regs = &stm32h7_adc_common_regs,
 	.clk_sel = stm32h7_adc_clk_sel,
+	.max_clk_rate_hz = 36000000,
+};
+
+static const struct stm32_adc_priv_cfg stm32mp1_adc_priv_cfg = {
+	.regs = &stm32h7_adc_common_regs,
+	.clk_sel = stm32h7_adc_clk_sel,
+	.max_clk_rate_hz = 40000000,
 };
 
 static const struct of_device_id stm32_adc_of_match[] = {
@@ -512,6 +539,9 @@ static int stm32_adc_remove(struct platform_device *pdev)
 		.compatible = "st,stm32h7-adc-core",
 		.data = (void *)&stm32h7_adc_priv_cfg
 	}, {
+		.compatible = "st,stm32mp1-adc-core",
+		.data = (void *)&stm32mp1_adc_priv_cfg
+	}, {
 	},
 };
 MODULE_DEVICE_TABLE(of, stm32_adc_of_match);
diff --git a/drivers/iio/adc/stm32-adc.c b/drivers/iio/adc/stm32-adc.c
index 9a2583ca..3784118 100644
--- a/drivers/iio/adc/stm32-adc.c
+++ b/drivers/iio/adc/stm32-adc.c
@@ -84,6 +84,7 @@
 #define STM32H7_ADC_CALFACT2		0xC8
 
 /* STM32H7_ADC_ISR - bit fields */
+#define STM32MP1_VREGREADY		BIT(12)
 #define STM32H7_EOC			BIT(2)
 #define STM32H7_ADRDY			BIT(0)
 
@@ -249,6 +250,7 @@ struct stm32_adc_regspec {
  * @adc_info:		per instance input channels definitions
  * @trigs:		external trigger sources
  * @clk_required:	clock is required
+ * @has_vregready:	vregready status flag presence
  * @selfcalib:		optional routine for self-calibration
  * @prepare:		optional prepare routine (power-up, enable)
  * @start_conv:		routine to start conversions
@@ -261,6 +263,7 @@ struct stm32_adc_cfg {
 	const struct stm32_adc_info	*adc_info;
 	struct stm32_adc_trig_info	*trigs;
 	bool clk_required;
+	bool has_vregready;
 	int (*selfcalib)(struct stm32_adc *);
 	int (*prepare)(struct stm32_adc *);
 	void (*start_conv)(struct stm32_adc *, bool dma);
@@ -695,8 +698,12 @@ static void stm32h7_adc_stop_conv(struct stm32_adc *adc)
 	stm32_adc_clr_bits(adc, STM32H7_ADC_CFGR, STM32H7_DMNGT_MASK);
 }
 
-static void stm32h7_adc_exit_pwr_down(struct stm32_adc *adc)
+static int stm32h7_adc_exit_pwr_down(struct stm32_adc *adc)
 {
+	struct iio_dev *indio_dev = iio_priv_to_dev(adc);
+	int ret;
+	u32 val;
+
 	/* Exit deep power down, then enable ADC voltage regulator */
 	stm32_adc_clr_bits(adc, STM32H7_ADC_CR, STM32H7_DEEPPWD);
 	stm32_adc_set_bits(adc, STM32H7_ADC_CR, STM32H7_ADVREGEN);
@@ -705,7 +712,20 @@ static void stm32h7_adc_exit_pwr_down(struct stm32_adc *adc)
 		stm32_adc_set_bits(adc, STM32H7_ADC_CR, STM32H7_BOOST);
 
 	/* Wait for startup time */
-	usleep_range(10, 20);
+	if (!adc->cfg->has_vregready) {
+		usleep_range(10, 20);
+		return 0;
+	}
+
+	ret = stm32_adc_readl_poll_timeout(STM32H7_ADC_ISR, val,
+					   val & STM32MP1_VREGREADY, 100,
+					   STM32_ADC_TIMEOUT_US);
+	if (ret) {
+		stm32_adc_set_bits(adc, STM32H7_ADC_CR, STM32H7_DEEPPWD);
+		dev_err(&indio_dev->dev, "Failed to exit power down\n");
+	}
+
+	return ret;
 }
 
 static void stm32h7_adc_enter_pwr_down(struct stm32_adc *adc)
@@ -888,7 +908,9 @@ static int stm32h7_adc_selfcalib(struct stm32_adc *adc)
 	int ret;
 	u32 val;
 
-	stm32h7_adc_exit_pwr_down(adc);
+	ret = stm32h7_adc_exit_pwr_down(adc);
+	if (ret)
+		return ret;
 
 	/*
 	 * Select calibration mode:
@@ -952,7 +974,10 @@ static int stm32h7_adc_prepare(struct stm32_adc *adc)
 {
 	int ret;
 
-	stm32h7_adc_exit_pwr_down(adc);
+	ret = stm32h7_adc_exit_pwr_down(adc);
+	if (ret)
+		return ret;
+
 	stm32_adc_writel(adc, STM32H7_ADC_DIFSEL, adc->difsel);
 
 	ret = stm32h7_adc_enable(adc);
@@ -1944,9 +1969,23 @@ static int stm32_adc_remove(struct platform_device *pdev)
 	.smp_cycles = stm32h7_adc_smp_cycles,
 };
 
+static const struct stm32_adc_cfg stm32mp1_adc_cfg = {
+	.regs = &stm32h7_adc_regspec,
+	.adc_info = &stm32h7_adc_info,
+	.trigs = stm32h7_adc_trigs,
+	.has_vregready = true,
+	.selfcalib = stm32h7_adc_selfcalib,
+	.start_conv = stm32h7_adc_start_conv,
+	.stop_conv = stm32h7_adc_stop_conv,
+	.prepare = stm32h7_adc_prepare,
+	.unprepare = stm32h7_adc_unprepare,
+	.smp_cycles = stm32h7_adc_smp_cycles,
+};
+
 static const struct of_device_id stm32_adc_of_match[] = {
 	{ .compatible = "st,stm32f4-adc", .data = (void *)&stm32f4_adc_cfg },
 	{ .compatible = "st,stm32h7-adc", .data = (void *)&stm32h7_adc_cfg },
+	{ .compatible = "st,stm32mp1-adc", .data = (void *)&stm32mp1_adc_cfg },
 	{},
 };
 MODULE_DEVICE_TABLE(of, stm32_adc_of_match);
-- 
1.9.1

^ permalink raw reply related	[flat|nested] 29+ messages in thread
* [PATCH 3/3] ARM: dts: stm32: Add ADC support to stm32mp157c
  2018-04-18 15:37 ` Fabrice Gasnier
  (?)
@ 2018-04-18 15:37   ` Fabrice Gasnier
  -1 siblings, 0 replies; 29+ messages in thread
From: Fabrice Gasnier @ 2018-04-18 15:37 UTC (permalink / raw)
  To: jic23, robh+dt, alexandre.torgue
  Cc: mark.rutland, mcoquelin.stm32, lars, knaack.h, pmeerw,
	fabrice.gasnier, linux-iio, devicetree, linux-arm-kernel,
	linux-kernel, benjamin.gaignard

stm32mp157c has an ADC block with two physical ADCs.

Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com>
---
 arch/arm/boot/dts/stm32mp157c.dtsi | 32 ++++++++++++++++++++++++++++++++
 1 file changed, 32 insertions(+)

diff --git a/arch/arm/boot/dts/stm32mp157c.dtsi b/arch/arm/boot/dts/stm32mp157c.dtsi
index bc3eddc..7758a90 100644
--- a/arch/arm/boot/dts/stm32mp157c.dtsi
+++ b/arch/arm/boot/dts/stm32mp157c.dtsi
@@ -160,6 +160,38 @@
 			status = "disabled";
 		};
 
+		adc: adc@48003000 {
+			compatible = "st,stm32mp1-adc-core";
+			reg = <0x48003000 0x400>;
+			interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&rcc ADC12>, <&rcc ADC12_K>;
+			clock-names = "bus", "adc";
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+
+			adc1: adc@0 {
+				compatible = "st,stm32mp1-adc";
+				#io-channel-cells = <1>;
+				reg = <0x0>;
+				interrupt-parent = <&adc>;
+				interrupts = <0>;
+				status = "disabled";
+			};
+
+			adc2: adc@100 {
+				compatible = "st,stm32mp1-adc";
+				#io-channel-cells = <1>;
+				reg = <0x100>;
+				interrupt-parent = <&adc>;
+				interrupts = <1>;
+				status = "disabled";
+			};
+		};
+
 		rcc: rcc@50000000 {
 			compatible = "st,stm32mp1-rcc", "syscon";
 			reg = <0x50000000 0x1000>;
-- 
1.9.1

^ permalink raw reply related	[flat|nested] 29+ messages in thread
* [PATCH 3/3] ARM: dts: stm32: Add ADC support to stm32mp157c
@ 2018-04-18 15:37   ` Fabrice Gasnier
  0 siblings, 0 replies; 29+ messages in thread
From: Fabrice Gasnier @ 2018-04-18 15:37 UTC (permalink / raw)
  To: jic23, robh+dt, alexandre.torgue
  Cc: mark.rutland, mcoquelin.stm32, lars, knaack.h, pmeerw,
	fabrice.gasnier, linux-iio, devicetree, linux-arm-kernel,
	linux-kernel, benjamin.gaignard

stm32mp157c has an ADC block with two physical ADCs.

Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com>
---
 arch/arm/boot/dts/stm32mp157c.dtsi | 32 ++++++++++++++++++++++++++++++++
 1 file changed, 32 insertions(+)

diff --git a/arch/arm/boot/dts/stm32mp157c.dtsi b/arch/arm/boot/dts/stm32mp157c.dtsi
index bc3eddc..7758a90 100644
--- a/arch/arm/boot/dts/stm32mp157c.dtsi
+++ b/arch/arm/boot/dts/stm32mp157c.dtsi
@@ -160,6 +160,38 @@
 			status = "disabled";
 		};
 
+		adc: adc@48003000 {
+			compatible = "st,stm32mp1-adc-core";
+			reg = <0x48003000 0x400>;
+			interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&rcc ADC12>, <&rcc ADC12_K>;
+			clock-names = "bus", "adc";
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+
+			adc1: adc@0 {
+				compatible = "st,stm32mp1-adc";
+				#io-channel-cells = <1>;
+				reg = <0x0>;
+				interrupt-parent = <&adc>;
+				interrupts = <0>;
+				status = "disabled";
+			};
+
+			adc2: adc@100 {
+				compatible = "st,stm32mp1-adc";
+				#io-channel-cells = <1>;
+				reg = <0x100>;
+				interrupt-parent = <&adc>;
+				interrupts = <1>;
+				status = "disabled";
+			};
+		};
+
 		rcc: rcc@50000000 {
 			compatible = "st,stm32mp1-rcc", "syscon";
 			reg = <0x50000000 0x1000>;
-- 
1.9.1

^ permalink raw reply related	[flat|nested] 29+ messages in thread
* [PATCH 3/3] ARM: dts: stm32: Add ADC support to stm32mp157c
@ 2018-04-18 15:37   ` Fabrice Gasnier
  0 siblings, 0 replies; 29+ messages in thread
From: Fabrice Gasnier @ 2018-04-18 15:37 UTC (permalink / raw)
  To: linux-arm-kernel

stm32mp157c has an ADC block with two physical ADCs.

Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com>
---
 arch/arm/boot/dts/stm32mp157c.dtsi | 32 ++++++++++++++++++++++++++++++++
 1 file changed, 32 insertions(+)

diff --git a/arch/arm/boot/dts/stm32mp157c.dtsi b/arch/arm/boot/dts/stm32mp157c.dtsi
index bc3eddc..7758a90 100644
--- a/arch/arm/boot/dts/stm32mp157c.dtsi
+++ b/arch/arm/boot/dts/stm32mp157c.dtsi
@@ -160,6 +160,38 @@
 			status = "disabled";
 		};
 
+		adc: adc at 48003000 {
+			compatible = "st,stm32mp1-adc-core";
+			reg = <0x48003000 0x400>;
+			interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&rcc ADC12>, <&rcc ADC12_K>;
+			clock-names = "bus", "adc";
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+
+			adc1: adc at 0 {
+				compatible = "st,stm32mp1-adc";
+				#io-channel-cells = <1>;
+				reg = <0x0>;
+				interrupt-parent = <&adc>;
+				interrupts = <0>;
+				status = "disabled";
+			};
+
+			adc2: adc at 100 {
+				compatible = "st,stm32mp1-adc";
+				#io-channel-cells = <1>;
+				reg = <0x100>;
+				interrupt-parent = <&adc>;
+				interrupts = <1>;
+				status = "disabled";
+			};
+		};
+
 		rcc: rcc at 50000000 {
 			compatible = "st,stm32mp1-rcc", "syscon";
 			reg = <0x50000000 0x1000>;
-- 
1.9.1

^ permalink raw reply related	[flat|nested] 29+ messages in thread
* Re: [PATCH 2/3] iio: adc: stm32-adc: add support for STM32MP1
  2018-04-18 15:37   ` Fabrice Gasnier
  (?)
@ 2018-04-21 15:36     ` Jonathan Cameron
  -1 siblings, 0 replies; 29+ messages in thread
From: Jonathan Cameron @ 2018-04-21 15:36 UTC (permalink / raw)
  To: Fabrice Gasnier
  Cc: robh+dt, alexandre.torgue, mark.rutland, mcoquelin.stm32, lars,
	knaack.h, pmeerw, linux-iio, devicetree, linux-arm-kernel,
	linux-kernel, benjamin.gaignard

On Wed, 18 Apr 2018 17:37:53 +0200
Fabrice Gasnier <fabrice.gasnier@st.com> wrote:

> Add support for STM32MP1 ADC. It's quite similar to STM32H7 ADC.
> Introduce new compatible to handle variants of this hardware such as
> vregready flag, trigger list, interrupts, clock rate.
> 
> Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com>
Looks good to me.

Applied to the togreg branch of iio.git and pushed out as testing for the
autobuilders to play with it.

Jonathan

> ---
>  drivers/iio/adc/stm32-adc-core.c | 66 +++++++++++++++++++++++++++++-----------
>  drivers/iio/adc/stm32-adc.c      | 47 +++++++++++++++++++++++++---
>  2 files changed, 91 insertions(+), 22 deletions(-)
> 
> diff --git a/drivers/iio/adc/stm32-adc-core.c b/drivers/iio/adc/stm32-adc-core.c
> index 40be7d9..ca432e7 100644
> --- a/drivers/iio/adc/stm32-adc-core.c
> +++ b/drivers/iio/adc/stm32-adc-core.c
> @@ -34,9 +34,6 @@
>  #define STM32F4_ADC_ADCPRE_SHIFT	16
>  #define STM32F4_ADC_ADCPRE_MASK		GENMASK(17, 16)
>  
> -/* STM32 F4 maximum analog clock rate (from datasheet) */
> -#define STM32F4_ADC_MAX_CLK_RATE	36000000
> -
>  /* STM32H7 - common registers for all ADC instances */
>  #define STM32H7_ADC_CSR			(STM32_ADCX_COMN_OFFSET + 0x00)
>  #define STM32H7_ADC_CCR			(STM32_ADCX_COMN_OFFSET + 0x08)
> @@ -51,9 +48,6 @@
>  #define STM32H7_CKMODE_SHIFT		16
>  #define STM32H7_CKMODE_MASK		GENMASK(17, 16)
>  
> -/* STM32 H7 maximum analog clock rate (from datasheet) */
> -#define STM32H7_ADC_MAX_CLK_RATE	36000000
> -
>  /**
>   * stm32_adc_common_regs - stm32 common registers, compatible dependent data
>   * @csr:	common status register offset
> @@ -74,15 +68,17 @@ struct stm32_adc_common_regs {
>   * stm32_adc_priv_cfg - stm32 core compatible configuration data
>   * @regs:	common registers for all instances
>   * @clk_sel:	clock selection routine
> + * @max_clk_rate_hz: maximum analog clock rate (Hz, from datasheet)
>   */
>  struct stm32_adc_priv_cfg {
>  	const struct stm32_adc_common_regs *regs;
>  	int (*clk_sel)(struct platform_device *, struct stm32_adc_priv *);
> +	u32 max_clk_rate_hz;
>  };
>  
>  /**
>   * struct stm32_adc_priv - stm32 ADC core private data
> - * @irq:		irq for ADC block
> + * @irq:		irq(s) for ADC block
>   * @domain:		irq domain reference
>   * @aclk:		clock reference for the analog circuitry
>   * @bclk:		bus clock common for all ADCs, depends on part used
> @@ -91,7 +87,7 @@ struct stm32_adc_priv_cfg {
>   * @common:		common data for all ADC instances
>   */
>  struct stm32_adc_priv {
> -	int				irq;
> +	int				irq[STM32_ADC_MAX_ADCS];
>  	struct irq_domain		*domain;
>  	struct clk			*aclk;
>  	struct clk			*bclk;
> @@ -133,7 +129,7 @@ static int stm32f4_adc_clk_sel(struct platform_device *pdev,
>  	}
>  
>  	for (i = 0; i < ARRAY_SIZE(stm32f4_pclk_div); i++) {
> -		if ((rate / stm32f4_pclk_div[i]) <= STM32F4_ADC_MAX_CLK_RATE)
> +		if ((rate / stm32f4_pclk_div[i]) <= priv->cfg->max_clk_rate_hz)
>  			break;
>  	}
>  	if (i >= ARRAY_SIZE(stm32f4_pclk_div)) {
> @@ -222,7 +218,7 @@ static int stm32h7_adc_clk_sel(struct platform_device *pdev,
>  			if (ckmode)
>  				continue;
>  
> -			if ((rate / div) <= STM32H7_ADC_MAX_CLK_RATE)
> +			if ((rate / div) <= priv->cfg->max_clk_rate_hz)
>  				goto out;
>  		}
>  	}
> @@ -242,7 +238,7 @@ static int stm32h7_adc_clk_sel(struct platform_device *pdev,
>  		if (!ckmode)
>  			continue;
>  
> -		if ((rate / div) <= STM32H7_ADC_MAX_CLK_RATE)
> +		if ((rate / div) <= priv->cfg->max_clk_rate_hz)
>  			goto out;
>  	}
>  
> @@ -328,11 +324,24 @@ static int stm32_adc_irq_probe(struct platform_device *pdev,
>  			       struct stm32_adc_priv *priv)
>  {
>  	struct device_node *np = pdev->dev.of_node;
> +	unsigned int i;
> +
> +	for (i = 0; i < STM32_ADC_MAX_ADCS; i++) {
> +		priv->irq[i] = platform_get_irq(pdev, i);
> +		if (priv->irq[i] < 0) {
> +			/*
> +			 * At least one interrupt must be provided, make others
> +			 * optional:
> +			 * - stm32f4/h7 shares a common interrupt.
> +			 * - stm32mp1, has one line per ADC (either for ADC1,
> +			 *   ADC2 or both).
> +			 */
> +			if (i && priv->irq[i] == -ENXIO)
> +				continue;
> +			dev_err(&pdev->dev, "failed to get irq\n");
>  
> -	priv->irq = platform_get_irq(pdev, 0);
> -	if (priv->irq < 0) {
> -		dev_err(&pdev->dev, "failed to get irq\n");
> -		return priv->irq;
> +			return priv->irq[i];
> +		}
>  	}
>  
>  	priv->domain = irq_domain_add_simple(np, STM32_ADC_MAX_ADCS, 0,
> @@ -343,8 +352,12 @@ static int stm32_adc_irq_probe(struct platform_device *pdev,
>  		return -ENOMEM;
>  	}
>  
> -	irq_set_chained_handler(priv->irq, stm32_adc_irq_handler);
> -	irq_set_handler_data(priv->irq, priv);
> +	for (i = 0; i < STM32_ADC_MAX_ADCS; i++) {
> +		if (priv->irq[i] < 0)
> +			continue;
> +		irq_set_chained_handler(priv->irq[i], stm32_adc_irq_handler);
> +		irq_set_handler_data(priv->irq[i], priv);
> +	}
>  
>  	return 0;
>  }
> @@ -353,11 +366,17 @@ static void stm32_adc_irq_remove(struct platform_device *pdev,
>  				 struct stm32_adc_priv *priv)
>  {
>  	int hwirq;
> +	unsigned int i;
>  
>  	for (hwirq = 0; hwirq < STM32_ADC_MAX_ADCS; hwirq++)
>  		irq_dispose_mapping(irq_find_mapping(priv->domain, hwirq));
>  	irq_domain_remove(priv->domain);
> -	irq_set_chained_handler(priv->irq, NULL);
> +
> +	for (i = 0; i < STM32_ADC_MAX_ADCS; i++) {
> +		if (priv->irq[i] < 0)
> +			continue;
> +		irq_set_chained_handler(priv->irq[i], NULL);
> +	}
>  }
>  
>  static int stm32_adc_probe(struct platform_device *pdev)
> @@ -497,11 +516,19 @@ static int stm32_adc_remove(struct platform_device *pdev)
>  static const struct stm32_adc_priv_cfg stm32f4_adc_priv_cfg = {
>  	.regs = &stm32f4_adc_common_regs,
>  	.clk_sel = stm32f4_adc_clk_sel,
> +	.max_clk_rate_hz = 36000000,
>  };
>  
>  static const struct stm32_adc_priv_cfg stm32h7_adc_priv_cfg = {
>  	.regs = &stm32h7_adc_common_regs,
>  	.clk_sel = stm32h7_adc_clk_sel,
> +	.max_clk_rate_hz = 36000000,
> +};
> +
> +static const struct stm32_adc_priv_cfg stm32mp1_adc_priv_cfg = {
> +	.regs = &stm32h7_adc_common_regs,
> +	.clk_sel = stm32h7_adc_clk_sel,
> +	.max_clk_rate_hz = 40000000,
>  };
>  
>  static const struct of_device_id stm32_adc_of_match[] = {
> @@ -512,6 +539,9 @@ static int stm32_adc_remove(struct platform_device *pdev)
>  		.compatible = "st,stm32h7-adc-core",
>  		.data = (void *)&stm32h7_adc_priv_cfg
>  	}, {
> +		.compatible = "st,stm32mp1-adc-core",
> +		.data = (void *)&stm32mp1_adc_priv_cfg
> +	}, {
>  	},
>  };
>  MODULE_DEVICE_TABLE(of, stm32_adc_of_match);
> diff --git a/drivers/iio/adc/stm32-adc.c b/drivers/iio/adc/stm32-adc.c
> index 9a2583ca..3784118 100644
> --- a/drivers/iio/adc/stm32-adc.c
> +++ b/drivers/iio/adc/stm32-adc.c
> @@ -84,6 +84,7 @@
>  #define STM32H7_ADC_CALFACT2		0xC8
>  
>  /* STM32H7_ADC_ISR - bit fields */
> +#define STM32MP1_VREGREADY		BIT(12)
>  #define STM32H7_EOC			BIT(2)
>  #define STM32H7_ADRDY			BIT(0)
>  
> @@ -249,6 +250,7 @@ struct stm32_adc_regspec {
>   * @adc_info:		per instance input channels definitions
>   * @trigs:		external trigger sources
>   * @clk_required:	clock is required
> + * @has_vregready:	vregready status flag presence
>   * @selfcalib:		optional routine for self-calibration
>   * @prepare:		optional prepare routine (power-up, enable)
>   * @start_conv:		routine to start conversions
> @@ -261,6 +263,7 @@ struct stm32_adc_cfg {
>  	const struct stm32_adc_info	*adc_info;
>  	struct stm32_adc_trig_info	*trigs;
>  	bool clk_required;
> +	bool has_vregready;
>  	int (*selfcalib)(struct stm32_adc *);
>  	int (*prepare)(struct stm32_adc *);
>  	void (*start_conv)(struct stm32_adc *, bool dma);
> @@ -695,8 +698,12 @@ static void stm32h7_adc_stop_conv(struct stm32_adc *adc)
>  	stm32_adc_clr_bits(adc, STM32H7_ADC_CFGR, STM32H7_DMNGT_MASK);
>  }
>  
> -static void stm32h7_adc_exit_pwr_down(struct stm32_adc *adc)
> +static int stm32h7_adc_exit_pwr_down(struct stm32_adc *adc)
>  {
> +	struct iio_dev *indio_dev = iio_priv_to_dev(adc);
> +	int ret;
> +	u32 val;
> +
>  	/* Exit deep power down, then enable ADC voltage regulator */
>  	stm32_adc_clr_bits(adc, STM32H7_ADC_CR, STM32H7_DEEPPWD);
>  	stm32_adc_set_bits(adc, STM32H7_ADC_CR, STM32H7_ADVREGEN);
> @@ -705,7 +712,20 @@ static void stm32h7_adc_exit_pwr_down(struct stm32_adc *adc)
>  		stm32_adc_set_bits(adc, STM32H7_ADC_CR, STM32H7_BOOST);
>  
>  	/* Wait for startup time */
> -	usleep_range(10, 20);
> +	if (!adc->cfg->has_vregready) {
> +		usleep_range(10, 20);
> +		return 0;
> +	}
> +
> +	ret = stm32_adc_readl_poll_timeout(STM32H7_ADC_ISR, val,
> +					   val & STM32MP1_VREGREADY, 100,
> +					   STM32_ADC_TIMEOUT_US);
> +	if (ret) {
> +		stm32_adc_set_bits(adc, STM32H7_ADC_CR, STM32H7_DEEPPWD);
> +		dev_err(&indio_dev->dev, "Failed to exit power down\n");
> +	}
> +
> +	return ret;
>  }
>  
>  static void stm32h7_adc_enter_pwr_down(struct stm32_adc *adc)
> @@ -888,7 +908,9 @@ static int stm32h7_adc_selfcalib(struct stm32_adc *adc)
>  	int ret;
>  	u32 val;
>  
> -	stm32h7_adc_exit_pwr_down(adc);
> +	ret = stm32h7_adc_exit_pwr_down(adc);
> +	if (ret)
> +		return ret;
>  
>  	/*
>  	 * Select calibration mode:
> @@ -952,7 +974,10 @@ static int stm32h7_adc_prepare(struct stm32_adc *adc)
>  {
>  	int ret;
>  
> -	stm32h7_adc_exit_pwr_down(adc);
> +	ret = stm32h7_adc_exit_pwr_down(adc);
> +	if (ret)
> +		return ret;
> +
>  	stm32_adc_writel(adc, STM32H7_ADC_DIFSEL, adc->difsel);
>  
>  	ret = stm32h7_adc_enable(adc);
> @@ -1944,9 +1969,23 @@ static int stm32_adc_remove(struct platform_device *pdev)
>  	.smp_cycles = stm32h7_adc_smp_cycles,
>  };
>  
> +static const struct stm32_adc_cfg stm32mp1_adc_cfg = {
> +	.regs = &stm32h7_adc_regspec,
> +	.adc_info = &stm32h7_adc_info,
> +	.trigs = stm32h7_adc_trigs,
> +	.has_vregready = true,
> +	.selfcalib = stm32h7_adc_selfcalib,
> +	.start_conv = stm32h7_adc_start_conv,
> +	.stop_conv = stm32h7_adc_stop_conv,
> +	.prepare = stm32h7_adc_prepare,
> +	.unprepare = stm32h7_adc_unprepare,
> +	.smp_cycles = stm32h7_adc_smp_cycles,
> +};
> +
>  static const struct of_device_id stm32_adc_of_match[] = {
>  	{ .compatible = "st,stm32f4-adc", .data = (void *)&stm32f4_adc_cfg },
>  	{ .compatible = "st,stm32h7-adc", .data = (void *)&stm32h7_adc_cfg },
> +	{ .compatible = "st,stm32mp1-adc", .data = (void *)&stm32mp1_adc_cfg },
>  	{},
>  };
>  MODULE_DEVICE_TABLE(of, stm32_adc_of_match);

^ permalink raw reply	[flat|nested] 29+ messages in thread
* Re: [PATCH 2/3] iio: adc: stm32-adc: add support for STM32MP1
@ 2018-04-21 15:36     ` Jonathan Cameron
  0 siblings, 0 replies; 29+ messages in thread
From: Jonathan Cameron @ 2018-04-21 15:36 UTC (permalink / raw)
  To: Fabrice Gasnier
  Cc: robh+dt, alexandre.torgue, mark.rutland, mcoquelin.stm32, lars,
	knaack.h, pmeerw, linux-iio, devicetree, linux-arm-kernel,
	linux-kernel, benjamin.gaignard

On Wed, 18 Apr 2018 17:37:53 +0200
Fabrice Gasnier <fabrice.gasnier@st.com> wrote:

> Add support for STM32MP1 ADC. It's quite similar to STM32H7 ADC.
> Introduce new compatible to handle variants of this hardware such as
> vregready flag, trigger list, interrupts, clock rate.
> 
> Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com>
Looks good to me.

Applied to the togreg branch of iio.git and pushed out as testing for the
autobuilders to play with it.

Jonathan

> ---
>  drivers/iio/adc/stm32-adc-core.c | 66 +++++++++++++++++++++++++++++-----------
>  drivers/iio/adc/stm32-adc.c      | 47 +++++++++++++++++++++++++---
>  2 files changed, 91 insertions(+), 22 deletions(-)
> 
> diff --git a/drivers/iio/adc/stm32-adc-core.c b/drivers/iio/adc/stm32-adc-core.c
> index 40be7d9..ca432e7 100644
> --- a/drivers/iio/adc/stm32-adc-core.c
> +++ b/drivers/iio/adc/stm32-adc-core.c
> @@ -34,9 +34,6 @@
>  #define STM32F4_ADC_ADCPRE_SHIFT	16
>  #define STM32F4_ADC_ADCPRE_MASK		GENMASK(17, 16)
>  
> -/* STM32 F4 maximum analog clock rate (from datasheet) */
> -#define STM32F4_ADC_MAX_CLK_RATE	36000000
> -
>  /* STM32H7 - common registers for all ADC instances */
>  #define STM32H7_ADC_CSR			(STM32_ADCX_COMN_OFFSET + 0x00)
>  #define STM32H7_ADC_CCR			(STM32_ADCX_COMN_OFFSET + 0x08)
> @@ -51,9 +48,6 @@
>  #define STM32H7_CKMODE_SHIFT		16
>  #define STM32H7_CKMODE_MASK		GENMASK(17, 16)
>  
> -/* STM32 H7 maximum analog clock rate (from datasheet) */
> -#define STM32H7_ADC_MAX_CLK_RATE	36000000
> -
>  /**
>   * stm32_adc_common_regs - stm32 common registers, compatible dependent data
>   * @csr:	common status register offset
> @@ -74,15 +68,17 @@ struct stm32_adc_common_regs {
>   * stm32_adc_priv_cfg - stm32 core compatible configuration data
>   * @regs:	common registers for all instances
>   * @clk_sel:	clock selection routine
> + * @max_clk_rate_hz: maximum analog clock rate (Hz, from datasheet)
>   */
>  struct stm32_adc_priv_cfg {
>  	const struct stm32_adc_common_regs *regs;
>  	int (*clk_sel)(struct platform_device *, struct stm32_adc_priv *);
> +	u32 max_clk_rate_hz;
>  };
>  
>  /**
>   * struct stm32_adc_priv - stm32 ADC core private data
> - * @irq:		irq for ADC block
> + * @irq:		irq(s) for ADC block
>   * @domain:		irq domain reference
>   * @aclk:		clock reference for the analog circuitry
>   * @bclk:		bus clock common for all ADCs, depends on part used
> @@ -91,7 +87,7 @@ struct stm32_adc_priv_cfg {
>   * @common:		common data for all ADC instances
>   */
>  struct stm32_adc_priv {
> -	int				irq;
> +	int				irq[STM32_ADC_MAX_ADCS];
>  	struct irq_domain		*domain;
>  	struct clk			*aclk;
>  	struct clk			*bclk;
> @@ -133,7 +129,7 @@ static int stm32f4_adc_clk_sel(struct platform_device *pdev,
>  	}
>  
>  	for (i = 0; i < ARRAY_SIZE(stm32f4_pclk_div); i++) {
> -		if ((rate / stm32f4_pclk_div[i]) <= STM32F4_ADC_MAX_CLK_RATE)
> +		if ((rate / stm32f4_pclk_div[i]) <= priv->cfg->max_clk_rate_hz)
>  			break;
>  	}
>  	if (i >= ARRAY_SIZE(stm32f4_pclk_div)) {
> @@ -222,7 +218,7 @@ static int stm32h7_adc_clk_sel(struct platform_device *pdev,
>  			if (ckmode)
>  				continue;
>  
> -			if ((rate / div) <= STM32H7_ADC_MAX_CLK_RATE)
> +			if ((rate / div) <= priv->cfg->max_clk_rate_hz)
>  				goto out;
>  		}
>  	}
> @@ -242,7 +238,7 @@ static int stm32h7_adc_clk_sel(struct platform_device *pdev,
>  		if (!ckmode)
>  			continue;
>  
> -		if ((rate / div) <= STM32H7_ADC_MAX_CLK_RATE)
> +		if ((rate / div) <= priv->cfg->max_clk_rate_hz)
>  			goto out;
>  	}
>  
> @@ -328,11 +324,24 @@ static int stm32_adc_irq_probe(struct platform_device *pdev,
>  			       struct stm32_adc_priv *priv)
>  {
>  	struct device_node *np = pdev->dev.of_node;
> +	unsigned int i;
> +
> +	for (i = 0; i < STM32_ADC_MAX_ADCS; i++) {
> +		priv->irq[i] = platform_get_irq(pdev, i);
> +		if (priv->irq[i] < 0) {
> +			/*
> +			 * At least one interrupt must be provided, make others
> +			 * optional:
> +			 * - stm32f4/h7 shares a common interrupt.
> +			 * - stm32mp1, has one line per ADC (either for ADC1,
> +			 *   ADC2 or both).
> +			 */
> +			if (i && priv->irq[i] == -ENXIO)
> +				continue;
> +			dev_err(&pdev->dev, "failed to get irq\n");
>  
> -	priv->irq = platform_get_irq(pdev, 0);
> -	if (priv->irq < 0) {
> -		dev_err(&pdev->dev, "failed to get irq\n");
> -		return priv->irq;
> +			return priv->irq[i];
> +		}
>  	}
>  
>  	priv->domain = irq_domain_add_simple(np, STM32_ADC_MAX_ADCS, 0,
> @@ -343,8 +352,12 @@ static int stm32_adc_irq_probe(struct platform_device *pdev,
>  		return -ENOMEM;
>  	}
>  
> -	irq_set_chained_handler(priv->irq, stm32_adc_irq_handler);
> -	irq_set_handler_data(priv->irq, priv);
> +	for (i = 0; i < STM32_ADC_MAX_ADCS; i++) {
> +		if (priv->irq[i] < 0)
> +			continue;
> +		irq_set_chained_handler(priv->irq[i], stm32_adc_irq_handler);
> +		irq_set_handler_data(priv->irq[i], priv);
> +	}
>  
>  	return 0;
>  }
> @@ -353,11 +366,17 @@ static void stm32_adc_irq_remove(struct platform_device *pdev,
>  				 struct stm32_adc_priv *priv)
>  {
>  	int hwirq;
> +	unsigned int i;
>  
>  	for (hwirq = 0; hwirq < STM32_ADC_MAX_ADCS; hwirq++)
>  		irq_dispose_mapping(irq_find_mapping(priv->domain, hwirq));
>  	irq_domain_remove(priv->domain);
> -	irq_set_chained_handler(priv->irq, NULL);
> +
> +	for (i = 0; i < STM32_ADC_MAX_ADCS; i++) {
> +		if (priv->irq[i] < 0)
> +			continue;
> +		irq_set_chained_handler(priv->irq[i], NULL);
> +	}
>  }
>  
>  static int stm32_adc_probe(struct platform_device *pdev)
> @@ -497,11 +516,19 @@ static int stm32_adc_remove(struct platform_device *pdev)
>  static const struct stm32_adc_priv_cfg stm32f4_adc_priv_cfg = {
>  	.regs = &stm32f4_adc_common_regs,
>  	.clk_sel = stm32f4_adc_clk_sel,
> +	.max_clk_rate_hz = 36000000,
>  };
>  
>  static const struct stm32_adc_priv_cfg stm32h7_adc_priv_cfg = {
>  	.regs = &stm32h7_adc_common_regs,
>  	.clk_sel = stm32h7_adc_clk_sel,
> +	.max_clk_rate_hz = 36000000,
> +};
> +
> +static const struct stm32_adc_priv_cfg stm32mp1_adc_priv_cfg = {
> +	.regs = &stm32h7_adc_common_regs,
> +	.clk_sel = stm32h7_adc_clk_sel,
> +	.max_clk_rate_hz = 40000000,
>  };
>  
>  static const struct of_device_id stm32_adc_of_match[] = {
> @@ -512,6 +539,9 @@ static int stm32_adc_remove(struct platform_device *pdev)
>  		.compatible = "st,stm32h7-adc-core",
>  		.data = (void *)&stm32h7_adc_priv_cfg
>  	}, {
> +		.compatible = "st,stm32mp1-adc-core",
> +		.data = (void *)&stm32mp1_adc_priv_cfg
> +	}, {
>  	},
>  };
>  MODULE_DEVICE_TABLE(of, stm32_adc_of_match);
> diff --git a/drivers/iio/adc/stm32-adc.c b/drivers/iio/adc/stm32-adc.c
> index 9a2583ca..3784118 100644
> --- a/drivers/iio/adc/stm32-adc.c
> +++ b/drivers/iio/adc/stm32-adc.c
> @@ -84,6 +84,7 @@
>  #define STM32H7_ADC_CALFACT2		0xC8
>  
>  /* STM32H7_ADC_ISR - bit fields */
> +#define STM32MP1_VREGREADY		BIT(12)
>  #define STM32H7_EOC			BIT(2)
>  #define STM32H7_ADRDY			BIT(0)
>  
> @@ -249,6 +250,7 @@ struct stm32_adc_regspec {
>   * @adc_info:		per instance input channels definitions
>   * @trigs:		external trigger sources
>   * @clk_required:	clock is required
> + * @has_vregready:	vregready status flag presence
>   * @selfcalib:		optional routine for self-calibration
>   * @prepare:		optional prepare routine (power-up, enable)
>   * @start_conv:		routine to start conversions
> @@ -261,6 +263,7 @@ struct stm32_adc_cfg {
>  	const struct stm32_adc_info	*adc_info;
>  	struct stm32_adc_trig_info	*trigs;
>  	bool clk_required;
> +	bool has_vregready;
>  	int (*selfcalib)(struct stm32_adc *);
>  	int (*prepare)(struct stm32_adc *);
>  	void (*start_conv)(struct stm32_adc *, bool dma);
> @@ -695,8 +698,12 @@ static void stm32h7_adc_stop_conv(struct stm32_adc *adc)
>  	stm32_adc_clr_bits(adc, STM32H7_ADC_CFGR, STM32H7_DMNGT_MASK);
>  }
>  
> -static void stm32h7_adc_exit_pwr_down(struct stm32_adc *adc)
> +static int stm32h7_adc_exit_pwr_down(struct stm32_adc *adc)
>  {
> +	struct iio_dev *indio_dev = iio_priv_to_dev(adc);
> +	int ret;
> +	u32 val;
> +
>  	/* Exit deep power down, then enable ADC voltage regulator */
>  	stm32_adc_clr_bits(adc, STM32H7_ADC_CR, STM32H7_DEEPPWD);
>  	stm32_adc_set_bits(adc, STM32H7_ADC_CR, STM32H7_ADVREGEN);
> @@ -705,7 +712,20 @@ static void stm32h7_adc_exit_pwr_down(struct stm32_adc *adc)
>  		stm32_adc_set_bits(adc, STM32H7_ADC_CR, STM32H7_BOOST);
>  
>  	/* Wait for startup time */
> -	usleep_range(10, 20);
> +	if (!adc->cfg->has_vregready) {
> +		usleep_range(10, 20);
> +		return 0;
> +	}
> +
> +	ret = stm32_adc_readl_poll_timeout(STM32H7_ADC_ISR, val,
> +					   val & STM32MP1_VREGREADY, 100,
> +					   STM32_ADC_TIMEOUT_US);
> +	if (ret) {
> +		stm32_adc_set_bits(adc, STM32H7_ADC_CR, STM32H7_DEEPPWD);
> +		dev_err(&indio_dev->dev, "Failed to exit power down\n");
> +	}
> +
> +	return ret;
>  }
>  
>  static void stm32h7_adc_enter_pwr_down(struct stm32_adc *adc)
> @@ -888,7 +908,9 @@ static int stm32h7_adc_selfcalib(struct stm32_adc *adc)
>  	int ret;
>  	u32 val;
>  
> -	stm32h7_adc_exit_pwr_down(adc);
> +	ret = stm32h7_adc_exit_pwr_down(adc);
> +	if (ret)
> +		return ret;
>  
>  	/*
>  	 * Select calibration mode:
> @@ -952,7 +974,10 @@ static int stm32h7_adc_prepare(struct stm32_adc *adc)
>  {
>  	int ret;
>  
> -	stm32h7_adc_exit_pwr_down(adc);
> +	ret = stm32h7_adc_exit_pwr_down(adc);
> +	if (ret)
> +		return ret;
> +
>  	stm32_adc_writel(adc, STM32H7_ADC_DIFSEL, adc->difsel);
>  
>  	ret = stm32h7_adc_enable(adc);
> @@ -1944,9 +1969,23 @@ static int stm32_adc_remove(struct platform_device *pdev)
>  	.smp_cycles = stm32h7_adc_smp_cycles,
>  };
>  
> +static const struct stm32_adc_cfg stm32mp1_adc_cfg = {
> +	.regs = &stm32h7_adc_regspec,
> +	.adc_info = &stm32h7_adc_info,
> +	.trigs = stm32h7_adc_trigs,
> +	.has_vregready = true,
> +	.selfcalib = stm32h7_adc_selfcalib,
> +	.start_conv = stm32h7_adc_start_conv,
> +	.stop_conv = stm32h7_adc_stop_conv,
> +	.prepare = stm32h7_adc_prepare,
> +	.unprepare = stm32h7_adc_unprepare,
> +	.smp_cycles = stm32h7_adc_smp_cycles,
> +};
> +
>  static const struct of_device_id stm32_adc_of_match[] = {
>  	{ .compatible = "st,stm32f4-adc", .data = (void *)&stm32f4_adc_cfg },
>  	{ .compatible = "st,stm32h7-adc", .data = (void *)&stm32h7_adc_cfg },
> +	{ .compatible = "st,stm32mp1-adc", .data = (void *)&stm32mp1_adc_cfg },
>  	{},
>  };
>  MODULE_DEVICE_TABLE(of, stm32_adc_of_match);

^ permalink raw reply	[flat|nested] 29+ messages in thread
* [PATCH 2/3] iio: adc: stm32-adc: add support for STM32MP1
@ 2018-04-21 15:36     ` Jonathan Cameron
  0 siblings, 0 replies; 29+ messages in thread
From: Jonathan Cameron @ 2018-04-21 15:36 UTC (permalink / raw)
  To: linux-arm-kernel

On Wed, 18 Apr 2018 17:37:53 +0200
Fabrice Gasnier <fabrice.gasnier@st.com> wrote:

> Add support for STM32MP1 ADC. It's quite similar to STM32H7 ADC.
> Introduce new compatible to handle variants of this hardware such as
> vregready flag, trigger list, interrupts, clock rate.
> 
> Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com>
Looks good to me.

Applied to the togreg branch of iio.git and pushed out as testing for the
autobuilders to play with it.

Jonathan

> ---
>  drivers/iio/adc/stm32-adc-core.c | 66 +++++++++++++++++++++++++++++-----------
>  drivers/iio/adc/stm32-adc.c      | 47 +++++++++++++++++++++++++---
>  2 files changed, 91 insertions(+), 22 deletions(-)
> 
> diff --git a/drivers/iio/adc/stm32-adc-core.c b/drivers/iio/adc/stm32-adc-core.c
> index 40be7d9..ca432e7 100644
> --- a/drivers/iio/adc/stm32-adc-core.c
> +++ b/drivers/iio/adc/stm32-adc-core.c
> @@ -34,9 +34,6 @@
>  #define STM32F4_ADC_ADCPRE_SHIFT	16
>  #define STM32F4_ADC_ADCPRE_MASK		GENMASK(17, 16)
>  
> -/* STM32 F4 maximum analog clock rate (from datasheet) */
> -#define STM32F4_ADC_MAX_CLK_RATE	36000000
> -
>  /* STM32H7 - common registers for all ADC instances */
>  #define STM32H7_ADC_CSR			(STM32_ADCX_COMN_OFFSET + 0x00)
>  #define STM32H7_ADC_CCR			(STM32_ADCX_COMN_OFFSET + 0x08)
> @@ -51,9 +48,6 @@
>  #define STM32H7_CKMODE_SHIFT		16
>  #define STM32H7_CKMODE_MASK		GENMASK(17, 16)
>  
> -/* STM32 H7 maximum analog clock rate (from datasheet) */
> -#define STM32H7_ADC_MAX_CLK_RATE	36000000
> -
>  /**
>   * stm32_adc_common_regs - stm32 common registers, compatible dependent data
>   * @csr:	common status register offset
> @@ -74,15 +68,17 @@ struct stm32_adc_common_regs {
>   * stm32_adc_priv_cfg - stm32 core compatible configuration data
>   * @regs:	common registers for all instances
>   * @clk_sel:	clock selection routine
> + * @max_clk_rate_hz: maximum analog clock rate (Hz, from datasheet)
>   */
>  struct stm32_adc_priv_cfg {
>  	const struct stm32_adc_common_regs *regs;
>  	int (*clk_sel)(struct platform_device *, struct stm32_adc_priv *);
> +	u32 max_clk_rate_hz;
>  };
>  
>  /**
>   * struct stm32_adc_priv - stm32 ADC core private data
> - * @irq:		irq for ADC block
> + * @irq:		irq(s) for ADC block
>   * @domain:		irq domain reference
>   * @aclk:		clock reference for the analog circuitry
>   * @bclk:		bus clock common for all ADCs, depends on part used
> @@ -91,7 +87,7 @@ struct stm32_adc_priv_cfg {
>   * @common:		common data for all ADC instances
>   */
>  struct stm32_adc_priv {
> -	int				irq;
> +	int				irq[STM32_ADC_MAX_ADCS];
>  	struct irq_domain		*domain;
>  	struct clk			*aclk;
>  	struct clk			*bclk;
> @@ -133,7 +129,7 @@ static int stm32f4_adc_clk_sel(struct platform_device *pdev,
>  	}
>  
>  	for (i = 0; i < ARRAY_SIZE(stm32f4_pclk_div); i++) {
> -		if ((rate / stm32f4_pclk_div[i]) <= STM32F4_ADC_MAX_CLK_RATE)
> +		if ((rate / stm32f4_pclk_div[i]) <= priv->cfg->max_clk_rate_hz)
>  			break;
>  	}
>  	if (i >= ARRAY_SIZE(stm32f4_pclk_div)) {
> @@ -222,7 +218,7 @@ static int stm32h7_adc_clk_sel(struct platform_device *pdev,
>  			if (ckmode)
>  				continue;
>  
> -			if ((rate / div) <= STM32H7_ADC_MAX_CLK_RATE)
> +			if ((rate / div) <= priv->cfg->max_clk_rate_hz)
>  				goto out;
>  		}
>  	}
> @@ -242,7 +238,7 @@ static int stm32h7_adc_clk_sel(struct platform_device *pdev,
>  		if (!ckmode)
>  			continue;
>  
> -		if ((rate / div) <= STM32H7_ADC_MAX_CLK_RATE)
> +		if ((rate / div) <= priv->cfg->max_clk_rate_hz)
>  			goto out;
>  	}
>  
> @@ -328,11 +324,24 @@ static int stm32_adc_irq_probe(struct platform_device *pdev,
>  			       struct stm32_adc_priv *priv)
>  {
>  	struct device_node *np = pdev->dev.of_node;
> +	unsigned int i;
> +
> +	for (i = 0; i < STM32_ADC_MAX_ADCS; i++) {
> +		priv->irq[i] = platform_get_irq(pdev, i);
> +		if (priv->irq[i] < 0) {
> +			/*
> +			 * At least one interrupt must be provided, make others
> +			 * optional:
> +			 * - stm32f4/h7 shares a common interrupt.
> +			 * - stm32mp1, has one line per ADC (either for ADC1,
> +			 *   ADC2 or both).
> +			 */
> +			if (i && priv->irq[i] == -ENXIO)
> +				continue;
> +			dev_err(&pdev->dev, "failed to get irq\n");
>  
> -	priv->irq = platform_get_irq(pdev, 0);
> -	if (priv->irq < 0) {
> -		dev_err(&pdev->dev, "failed to get irq\n");
> -		return priv->irq;
> +			return priv->irq[i];
> +		}
>  	}
>  
>  	priv->domain = irq_domain_add_simple(np, STM32_ADC_MAX_ADCS, 0,
> @@ -343,8 +352,12 @@ static int stm32_adc_irq_probe(struct platform_device *pdev,
>  		return -ENOMEM;
>  	}
>  
> -	irq_set_chained_handler(priv->irq, stm32_adc_irq_handler);
> -	irq_set_handler_data(priv->irq, priv);
> +	for (i = 0; i < STM32_ADC_MAX_ADCS; i++) {
> +		if (priv->irq[i] < 0)
> +			continue;
> +		irq_set_chained_handler(priv->irq[i], stm32_adc_irq_handler);
> +		irq_set_handler_data(priv->irq[i], priv);
> +	}
>  
>  	return 0;
>  }
> @@ -353,11 +366,17 @@ static void stm32_adc_irq_remove(struct platform_device *pdev,
>  				 struct stm32_adc_priv *priv)
>  {
>  	int hwirq;
> +	unsigned int i;
>  
>  	for (hwirq = 0; hwirq < STM32_ADC_MAX_ADCS; hwirq++)
>  		irq_dispose_mapping(irq_find_mapping(priv->domain, hwirq));
>  	irq_domain_remove(priv->domain);
> -	irq_set_chained_handler(priv->irq, NULL);
> +
> +	for (i = 0; i < STM32_ADC_MAX_ADCS; i++) {
> +		if (priv->irq[i] < 0)
> +			continue;
> +		irq_set_chained_handler(priv->irq[i], NULL);
> +	}
>  }
>  
>  static int stm32_adc_probe(struct platform_device *pdev)
> @@ -497,11 +516,19 @@ static int stm32_adc_remove(struct platform_device *pdev)
>  static const struct stm32_adc_priv_cfg stm32f4_adc_priv_cfg = {
>  	.regs = &stm32f4_adc_common_regs,
>  	.clk_sel = stm32f4_adc_clk_sel,
> +	.max_clk_rate_hz = 36000000,
>  };
>  
>  static const struct stm32_adc_priv_cfg stm32h7_adc_priv_cfg = {
>  	.regs = &stm32h7_adc_common_regs,
>  	.clk_sel = stm32h7_adc_clk_sel,
> +	.max_clk_rate_hz = 36000000,
> +};
> +
> +static const struct stm32_adc_priv_cfg stm32mp1_adc_priv_cfg = {
> +	.regs = &stm32h7_adc_common_regs,
> +	.clk_sel = stm32h7_adc_clk_sel,
> +	.max_clk_rate_hz = 40000000,
>  };
>  
>  static const struct of_device_id stm32_adc_of_match[] = {
> @@ -512,6 +539,9 @@ static int stm32_adc_remove(struct platform_device *pdev)
>  		.compatible = "st,stm32h7-adc-core",
>  		.data = (void *)&stm32h7_adc_priv_cfg
>  	}, {
> +		.compatible = "st,stm32mp1-adc-core",
> +		.data = (void *)&stm32mp1_adc_priv_cfg
> +	}, {
>  	},
>  };
>  MODULE_DEVICE_TABLE(of, stm32_adc_of_match);
> diff --git a/drivers/iio/adc/stm32-adc.c b/drivers/iio/adc/stm32-adc.c
> index 9a2583ca..3784118 100644
> --- a/drivers/iio/adc/stm32-adc.c
> +++ b/drivers/iio/adc/stm32-adc.c
> @@ -84,6 +84,7 @@
>  #define STM32H7_ADC_CALFACT2		0xC8
>  
>  /* STM32H7_ADC_ISR - bit fields */
> +#define STM32MP1_VREGREADY		BIT(12)
>  #define STM32H7_EOC			BIT(2)
>  #define STM32H7_ADRDY			BIT(0)
>  
> @@ -249,6 +250,7 @@ struct stm32_adc_regspec {
>   * @adc_info:		per instance input channels definitions
>   * @trigs:		external trigger sources
>   * @clk_required:	clock is required
> + * @has_vregready:	vregready status flag presence
>   * @selfcalib:		optional routine for self-calibration
>   * @prepare:		optional prepare routine (power-up, enable)
>   * @start_conv:		routine to start conversions
> @@ -261,6 +263,7 @@ struct stm32_adc_cfg {
>  	const struct stm32_adc_info	*adc_info;
>  	struct stm32_adc_trig_info	*trigs;
>  	bool clk_required;
> +	bool has_vregready;
>  	int (*selfcalib)(struct stm32_adc *);
>  	int (*prepare)(struct stm32_adc *);
>  	void (*start_conv)(struct stm32_adc *, bool dma);
> @@ -695,8 +698,12 @@ static void stm32h7_adc_stop_conv(struct stm32_adc *adc)
>  	stm32_adc_clr_bits(adc, STM32H7_ADC_CFGR, STM32H7_DMNGT_MASK);
>  }
>  
> -static void stm32h7_adc_exit_pwr_down(struct stm32_adc *adc)
> +static int stm32h7_adc_exit_pwr_down(struct stm32_adc *adc)
>  {
> +	struct iio_dev *indio_dev = iio_priv_to_dev(adc);
> +	int ret;
> +	u32 val;
> +
>  	/* Exit deep power down, then enable ADC voltage regulator */
>  	stm32_adc_clr_bits(adc, STM32H7_ADC_CR, STM32H7_DEEPPWD);
>  	stm32_adc_set_bits(adc, STM32H7_ADC_CR, STM32H7_ADVREGEN);
> @@ -705,7 +712,20 @@ static void stm32h7_adc_exit_pwr_down(struct stm32_adc *adc)
>  		stm32_adc_set_bits(adc, STM32H7_ADC_CR, STM32H7_BOOST);
>  
>  	/* Wait for startup time */
> -	usleep_range(10, 20);
> +	if (!adc->cfg->has_vregready) {
> +		usleep_range(10, 20);
> +		return 0;
> +	}
> +
> +	ret = stm32_adc_readl_poll_timeout(STM32H7_ADC_ISR, val,
> +					   val & STM32MP1_VREGREADY, 100,
> +					   STM32_ADC_TIMEOUT_US);
> +	if (ret) {
> +		stm32_adc_set_bits(adc, STM32H7_ADC_CR, STM32H7_DEEPPWD);
> +		dev_err(&indio_dev->dev, "Failed to exit power down\n");
> +	}
> +
> +	return ret;
>  }
>  
>  static void stm32h7_adc_enter_pwr_down(struct stm32_adc *adc)
> @@ -888,7 +908,9 @@ static int stm32h7_adc_selfcalib(struct stm32_adc *adc)
>  	int ret;
>  	u32 val;
>  
> -	stm32h7_adc_exit_pwr_down(adc);
> +	ret = stm32h7_adc_exit_pwr_down(adc);
> +	if (ret)
> +		return ret;
>  
>  	/*
>  	 * Select calibration mode:
> @@ -952,7 +974,10 @@ static int stm32h7_adc_prepare(struct stm32_adc *adc)
>  {
>  	int ret;
>  
> -	stm32h7_adc_exit_pwr_down(adc);
> +	ret = stm32h7_adc_exit_pwr_down(adc);
> +	if (ret)
> +		return ret;
> +
>  	stm32_adc_writel(adc, STM32H7_ADC_DIFSEL, adc->difsel);
>  
>  	ret = stm32h7_adc_enable(adc);
> @@ -1944,9 +1969,23 @@ static int stm32_adc_remove(struct platform_device *pdev)
>  	.smp_cycles = stm32h7_adc_smp_cycles,
>  };
>  
> +static const struct stm32_adc_cfg stm32mp1_adc_cfg = {
> +	.regs = &stm32h7_adc_regspec,
> +	.adc_info = &stm32h7_adc_info,
> +	.trigs = stm32h7_adc_trigs,
> +	.has_vregready = true,
> +	.selfcalib = stm32h7_adc_selfcalib,
> +	.start_conv = stm32h7_adc_start_conv,
> +	.stop_conv = stm32h7_adc_stop_conv,
> +	.prepare = stm32h7_adc_prepare,
> +	.unprepare = stm32h7_adc_unprepare,
> +	.smp_cycles = stm32h7_adc_smp_cycles,
> +};
> +
>  static const struct of_device_id stm32_adc_of_match[] = {
>  	{ .compatible = "st,stm32f4-adc", .data = (void *)&stm32f4_adc_cfg },
>  	{ .compatible = "st,stm32h7-adc", .data = (void *)&stm32h7_adc_cfg },
> +	{ .compatible = "st,stm32mp1-adc", .data = (void *)&stm32mp1_adc_cfg },
>  	{},
>  };
>  MODULE_DEVICE_TABLE(of, stm32_adc_of_match);

^ permalink raw reply	[flat|nested] 29+ messages in thread
* Re: [PATCH 1/3] dt-bindings: iio: stm32-adc: add support for STM32MP1.
  2018-04-18 15:37   ` Fabrice Gasnier
  (?)
@ 2018-04-21 15:36     ` Jonathan Cameron
  -1 siblings, 0 replies; 29+ messages in thread
From: Jonathan Cameron @ 2018-04-21 15:36 UTC (permalink / raw)
  To: Fabrice Gasnier
  Cc: robh+dt, alexandre.torgue, mark.rutland, mcoquelin.stm32, lars,
	knaack.h, pmeerw, linux-iio, devicetree, linux-arm-kernel,
	linux-kernel, benjamin.gaignard

On Wed, 18 Apr 2018 17:37:52 +0200
Fabrice Gasnier <fabrice.gasnier@st.com> wrote:

> Document support for STM32MP1 ADC. It's quite similar to STM32H7 ADC.
> Introduce "st,stm32mp1-adc" compatible to handle variants of this
> hardware such as vregready flag, interrupts, clock rate.
> 
> Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com>
Pretty uncontroversial I think so I'll take this one with out
waiting Rob or Mark's time (though of course they are welcome
to offer feedback!)

Applied to the togreg branch of iio.git and pushed out as testing for
the autobuilders to play with it.

Thanks,

Jonathan

> ---
>  Documentation/devicetree/bindings/iio/adc/st,stm32-adc.txt | 6 +++++-
>  1 file changed, 5 insertions(+), 1 deletion(-)
> 
> diff --git a/Documentation/devicetree/bindings/iio/adc/st,stm32-adc.txt b/Documentation/devicetree/bindings/iio/adc/st,stm32-adc.txt
> index e8bb824..9994384 100644
> --- a/Documentation/devicetree/bindings/iio/adc/st,stm32-adc.txt
> +++ b/Documentation/devicetree/bindings/iio/adc/st,stm32-adc.txt
> @@ -24,8 +24,11 @@ Required properties:
>  - compatible: Should be one of:
>    "st,stm32f4-adc-core"
>    "st,stm32h7-adc-core"
> +  "st,stm32mp1-adc-core"
>  - reg: Offset and length of the ADC block register set.
> -- interrupts: Must contain the interrupt for ADC block.
> +- interrupts: One or more interrupts for ADC block. Some parts like stm32f4
> +  and stm32h7 share a common ADC interrupt line. stm32mp1 has separate
> +  lines for each ADC within ADC block.
>  - clocks: Core can use up to two clocks, depending on part used:
>    - "adc" clock: for the analog circuitry, common to all ADCs.
>      It's required on stm32f4.
> @@ -53,6 +56,7 @@ Required properties:
>  - compatible: Should be one of:
>    "st,stm32f4-adc"
>    "st,stm32h7-adc"
> +  "st,stm32mp1-adc"
>  - reg: Offset of ADC instance in ADC block (e.g. may be 0x0, 0x100, 0x200).
>  - clocks: Input clock private to this ADC instance. It's required only on
>    stm32f4, that has per instance clock input for registers access.

^ permalink raw reply	[flat|nested] 29+ messages in thread
* Re: [PATCH 1/3] dt-bindings: iio: stm32-adc: add support for STM32MP1.
@ 2018-04-21 15:36     ` Jonathan Cameron
  0 siblings, 0 replies; 29+ messages in thread
From: Jonathan Cameron @ 2018-04-21 15:36 UTC (permalink / raw)
  To: Fabrice Gasnier
  Cc: robh+dt, alexandre.torgue, mark.rutland, mcoquelin.stm32, lars,
	knaack.h, pmeerw, linux-iio, devicetree, linux-arm-kernel,
	linux-kernel, benjamin.gaignard

On Wed, 18 Apr 2018 17:37:52 +0200
Fabrice Gasnier <fabrice.gasnier@st.com> wrote:

> Document support for STM32MP1 ADC. It's quite similar to STM32H7 ADC.
> Introduce "st,stm32mp1-adc" compatible to handle variants of this
> hardware such as vregready flag, interrupts, clock rate.
> 
> Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com>
Pretty uncontroversial I think so I'll take this one with out
waiting Rob or Mark's time (though of course they are welcome
to offer feedback!)

Applied to the togreg branch of iio.git and pushed out as testing for
the autobuilders to play with it.

Thanks,

Jonathan

> ---
>  Documentation/devicetree/bindings/iio/adc/st,stm32-adc.txt | 6 +++++-
>  1 file changed, 5 insertions(+), 1 deletion(-)
> 
> diff --git a/Documentation/devicetree/bindings/iio/adc/st,stm32-adc.txt b/Documentation/devicetree/bindings/iio/adc/st,stm32-adc.txt
> index e8bb824..9994384 100644
> --- a/Documentation/devicetree/bindings/iio/adc/st,stm32-adc.txt
> +++ b/Documentation/devicetree/bindings/iio/adc/st,stm32-adc.txt
> @@ -24,8 +24,11 @@ Required properties:
>  - compatible: Should be one of:
>    "st,stm32f4-adc-core"
>    "st,stm32h7-adc-core"
> +  "st,stm32mp1-adc-core"
>  - reg: Offset and length of the ADC block register set.
> -- interrupts: Must contain the interrupt for ADC block.
> +- interrupts: One or more interrupts for ADC block. Some parts like stm32f4
> +  and stm32h7 share a common ADC interrupt line. stm32mp1 has separate
> +  lines for each ADC within ADC block.
>  - clocks: Core can use up to two clocks, depending on part used:
>    - "adc" clock: for the analog circuitry, common to all ADCs.
>      It's required on stm32f4.
> @@ -53,6 +56,7 @@ Required properties:
>  - compatible: Should be one of:
>    "st,stm32f4-adc"
>    "st,stm32h7-adc"
> +  "st,stm32mp1-adc"
>  - reg: Offset of ADC instance in ADC block (e.g. may be 0x0, 0x100, 0x200).
>  - clocks: Input clock private to this ADC instance. It's required only on
>    stm32f4, that has per instance clock input for registers access.

^ permalink raw reply	[flat|nested] 29+ messages in thread
* [PATCH 1/3] dt-bindings: iio: stm32-adc: add support for STM32MP1.
@ 2018-04-21 15:36     ` Jonathan Cameron
  0 siblings, 0 replies; 29+ messages in thread
From: Jonathan Cameron @ 2018-04-21 15:36 UTC (permalink / raw)
  To: linux-arm-kernel

On Wed, 18 Apr 2018 17:37:52 +0200
Fabrice Gasnier <fabrice.gasnier@st.com> wrote:

> Document support for STM32MP1 ADC. It's quite similar to STM32H7 ADC.
> Introduce "st,stm32mp1-adc" compatible to handle variants of this
> hardware such as vregready flag, interrupts, clock rate.
> 
> Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com>
Pretty uncontroversial I think so I'll take this one with out
waiting Rob or Mark's time (though of course they are welcome
to offer feedback!)

Applied to the togreg branch of iio.git and pushed out as testing for
the autobuilders to play with it.

Thanks,

Jonathan

> ---
>  Documentation/devicetree/bindings/iio/adc/st,stm32-adc.txt | 6 +++++-
>  1 file changed, 5 insertions(+), 1 deletion(-)
> 
> diff --git a/Documentation/devicetree/bindings/iio/adc/st,stm32-adc.txt b/Documentation/devicetree/bindings/iio/adc/st,stm32-adc.txt
> index e8bb824..9994384 100644
> --- a/Documentation/devicetree/bindings/iio/adc/st,stm32-adc.txt
> +++ b/Documentation/devicetree/bindings/iio/adc/st,stm32-adc.txt
> @@ -24,8 +24,11 @@ Required properties:
>  - compatible: Should be one of:
>    "st,stm32f4-adc-core"
>    "st,stm32h7-adc-core"
> +  "st,stm32mp1-adc-core"
>  - reg: Offset and length of the ADC block register set.
> -- interrupts: Must contain the interrupt for ADC block.
> +- interrupts: One or more interrupts for ADC block. Some parts like stm32f4
> +  and stm32h7 share a common ADC interrupt line. stm32mp1 has separate
> +  lines for each ADC within ADC block.
>  - clocks: Core can use up to two clocks, depending on part used:
>    - "adc" clock: for the analog circuitry, common to all ADCs.
>      It's required on stm32f4.
> @@ -53,6 +56,7 @@ Required properties:
>  - compatible: Should be one of:
>    "st,stm32f4-adc"
>    "st,stm32h7-adc"
> +  "st,stm32mp1-adc"
>  - reg: Offset of ADC instance in ADC block (e.g. may be 0x0, 0x100, 0x200).
>  - clocks: Input clock private to this ADC instance. It's required only on
>    stm32f4, that has per instance clock input for registers access.

^ permalink raw reply	[flat|nested] 29+ messages in thread
* Re: [PATCH 3/3] ARM: dts: stm32: Add ADC support to stm32mp157c
  2018-04-18 15:37   ` Fabrice Gasnier
  (?)
@ 2018-04-21 15:37     ` Jonathan Cameron
  -1 siblings, 0 replies; 29+ messages in thread
From: Jonathan Cameron @ 2018-04-21 15:37 UTC (permalink / raw)
  To: Fabrice Gasnier
  Cc: robh+dt, alexandre.torgue, mark.rutland, mcoquelin.stm32, lars,
	knaack.h, pmeerw, linux-iio, devicetree, linux-arm-kernel,
	linux-kernel, benjamin.gaignard

On Wed, 18 Apr 2018 17:37:54 +0200
Fabrice Gasnier <fabrice.gasnier@st.com> wrote:

> stm32mp157c has an ADC block with two physical ADCs.
> 
> Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com>
The relevant driver support is queued up for next merge window in the IIO tree.

Thanks,

Jonathan

> ---
>  arch/arm/boot/dts/stm32mp157c.dtsi | 32 ++++++++++++++++++++++++++++++++
>  1 file changed, 32 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/stm32mp157c.dtsi b/arch/arm/boot/dts/stm32mp157c.dtsi
> index bc3eddc..7758a90 100644
> --- a/arch/arm/boot/dts/stm32mp157c.dtsi
> +++ b/arch/arm/boot/dts/stm32mp157c.dtsi
> @@ -160,6 +160,38 @@
>  			status = "disabled";
>  		};
>  
> +		adc: adc@48003000 {
> +			compatible = "st,stm32mp1-adc-core";
> +			reg = <0x48003000 0x400>;
> +			interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
> +			clocks = <&rcc ADC12>, <&rcc ADC12_K>;
> +			clock-names = "bus", "adc";
> +			interrupt-controller;
> +			#interrupt-cells = <1>;
> +			#address-cells = <1>;
> +			#size-cells = <0>;
> +			status = "disabled";
> +
> +			adc1: adc@0 {
> +				compatible = "st,stm32mp1-adc";
> +				#io-channel-cells = <1>;
> +				reg = <0x0>;
> +				interrupt-parent = <&adc>;
> +				interrupts = <0>;
> +				status = "disabled";
> +			};
> +
> +			adc2: adc@100 {
> +				compatible = "st,stm32mp1-adc";
> +				#io-channel-cells = <1>;
> +				reg = <0x100>;
> +				interrupt-parent = <&adc>;
> +				interrupts = <1>;
> +				status = "disabled";
> +			};
> +		};
> +
>  		rcc: rcc@50000000 {
>  			compatible = "st,stm32mp1-rcc", "syscon";
>  			reg = <0x50000000 0x1000>;

^ permalink raw reply	[flat|nested] 29+ messages in thread
* Re: [PATCH 3/3] ARM: dts: stm32: Add ADC support to stm32mp157c
@ 2018-04-21 15:37     ` Jonathan Cameron
  0 siblings, 0 replies; 29+ messages in thread
From: Jonathan Cameron @ 2018-04-21 15:37 UTC (permalink / raw)
  To: Fabrice Gasnier
  Cc: robh+dt, alexandre.torgue, mark.rutland, mcoquelin.stm32, lars,
	knaack.h, pmeerw, linux-iio, devicetree, linux-arm-kernel,
	linux-kernel, benjamin.gaignard

On Wed, 18 Apr 2018 17:37:54 +0200
Fabrice Gasnier <fabrice.gasnier@st.com> wrote:

> stm32mp157c has an ADC block with two physical ADCs.
> 
> Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com>
The relevant driver support is queued up for next merge window in the IIO tree.

Thanks,

Jonathan

> ---
>  arch/arm/boot/dts/stm32mp157c.dtsi | 32 ++++++++++++++++++++++++++++++++
>  1 file changed, 32 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/stm32mp157c.dtsi b/arch/arm/boot/dts/stm32mp157c.dtsi
> index bc3eddc..7758a90 100644
> --- a/arch/arm/boot/dts/stm32mp157c.dtsi
> +++ b/arch/arm/boot/dts/stm32mp157c.dtsi
> @@ -160,6 +160,38 @@
>  			status = "disabled";
>  		};
>  
> +		adc: adc@48003000 {
> +			compatible = "st,stm32mp1-adc-core";
> +			reg = <0x48003000 0x400>;
> +			interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
> +			clocks = <&rcc ADC12>, <&rcc ADC12_K>;
> +			clock-names = "bus", "adc";
> +			interrupt-controller;
> +			#interrupt-cells = <1>;
> +			#address-cells = <1>;
> +			#size-cells = <0>;
> +			status = "disabled";
> +
> +			adc1: adc@0 {
> +				compatible = "st,stm32mp1-adc";
> +				#io-channel-cells = <1>;
> +				reg = <0x0>;
> +				interrupt-parent = <&adc>;
> +				interrupts = <0>;
> +				status = "disabled";
> +			};
> +
> +			adc2: adc@100 {
> +				compatible = "st,stm32mp1-adc";
> +				#io-channel-cells = <1>;
> +				reg = <0x100>;
> +				interrupt-parent = <&adc>;
> +				interrupts = <1>;
> +				status = "disabled";
> +			};
> +		};
> +
>  		rcc: rcc@50000000 {
>  			compatible = "st,stm32mp1-rcc", "syscon";
>  			reg = <0x50000000 0x1000>;

^ permalink raw reply	[flat|nested] 29+ messages in thread
* [PATCH 3/3] ARM: dts: stm32: Add ADC support to stm32mp157c
@ 2018-04-21 15:37     ` Jonathan Cameron
  0 siblings, 0 replies; 29+ messages in thread
From: Jonathan Cameron @ 2018-04-21 15:37 UTC (permalink / raw)
  To: linux-arm-kernel

On Wed, 18 Apr 2018 17:37:54 +0200
Fabrice Gasnier <fabrice.gasnier@st.com> wrote:

> stm32mp157c has an ADC block with two physical ADCs.
> 
> Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com>
The relevant driver support is queued up for next merge window in the IIO tree.

Thanks,

Jonathan

> ---
>  arch/arm/boot/dts/stm32mp157c.dtsi | 32 ++++++++++++++++++++++++++++++++
>  1 file changed, 32 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/stm32mp157c.dtsi b/arch/arm/boot/dts/stm32mp157c.dtsi
> index bc3eddc..7758a90 100644
> --- a/arch/arm/boot/dts/stm32mp157c.dtsi
> +++ b/arch/arm/boot/dts/stm32mp157c.dtsi
> @@ -160,6 +160,38 @@
>  			status = "disabled";
>  		};
>  
> +		adc: adc at 48003000 {
> +			compatible = "st,stm32mp1-adc-core";
> +			reg = <0x48003000 0x400>;
> +			interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
> +			clocks = <&rcc ADC12>, <&rcc ADC12_K>;
> +			clock-names = "bus", "adc";
> +			interrupt-controller;
> +			#interrupt-cells = <1>;
> +			#address-cells = <1>;
> +			#size-cells = <0>;
> +			status = "disabled";
> +
> +			adc1: adc at 0 {
> +				compatible = "st,stm32mp1-adc";
> +				#io-channel-cells = <1>;
> +				reg = <0x0>;
> +				interrupt-parent = <&adc>;
> +				interrupts = <0>;
> +				status = "disabled";
> +			};
> +
> +			adc2: adc at 100 {
> +				compatible = "st,stm32mp1-adc";
> +				#io-channel-cells = <1>;
> +				reg = <0x100>;
> +				interrupt-parent = <&adc>;
> +				interrupts = <1>;
> +				status = "disabled";
> +			};
> +		};
> +
>  		rcc: rcc at 50000000 {
>  			compatible = "st,stm32mp1-rcc", "syscon";
>  			reg = <0x50000000 0x1000>;

^ permalink raw reply	[flat|nested] 29+ messages in thread
* Re: [PATCH 1/3] dt-bindings: iio: stm32-adc: add support for STM32MP1.
  2018-04-18 15:37   ` Fabrice Gasnier
@ 2018-04-24 16:27     ` Rob Herring
  -1 siblings, 0 replies; 29+ messages in thread
From: Rob Herring @ 2018-04-24 16:27 UTC (permalink / raw)
  To: Fabrice Gasnier
  Cc: jic23, alexandre.torgue, mark.rutland, mcoquelin.stm32, lars,
	knaack.h, pmeerw, linux-iio, devicetree, linux-arm-kernel,
	linux-kernel, benjamin.gaignard

On Wed, Apr 18, 2018 at 05:37:52PM +0200, Fabrice Gasnier wrote:
> Document support for STM32MP1 ADC. It's quite similar to STM32H7 ADC.
> Introduce "st,stm32mp1-adc" compatible to handle variants of this
> hardware such as vregready flag, interrupts, clock rate.
> 
> Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com>
> ---
>  Documentation/devicetree/bindings/iio/adc/st,stm32-adc.txt | 6 +++++-
>  1 file changed, 5 insertions(+), 1 deletion(-)
> 
> diff --git a/Documentation/devicetree/bindings/iio/adc/st,stm32-adc.txt b/Documentation/devicetree/bindings/iio/adc/st,stm32-adc.txt
> index e8bb824..9994384 100644
> --- a/Documentation/devicetree/bindings/iio/adc/st,stm32-adc.txt
> +++ b/Documentation/devicetree/bindings/iio/adc/st,stm32-adc.txt
> @@ -24,8 +24,11 @@ Required properties:
>  - compatible: Should be one of:
>    "st,stm32f4-adc-core"
>    "st,stm32h7-adc-core"
> +  "st,stm32mp1-adc-core"
>  - reg: Offset and length of the ADC block register set.
> -- interrupts: Must contain the interrupt for ADC block.
> +- interrupts: One or more interrupts for ADC block. Some parts like stm32f4
> +  and stm32h7 share a common ADC interrupt line. stm32mp1 has separate
> +  lines for each ADC within ADC block.

How many interrupt lines is that?

>  - clocks: Core can use up to two clocks, depending on part used:
>    - "adc" clock: for the analog circuitry, common to all ADCs.
>      It's required on stm32f4.
> @@ -53,6 +56,7 @@ Required properties:
>  - compatible: Should be one of:
>    "st,stm32f4-adc"
>    "st,stm32h7-adc"
> +  "st,stm32mp1-adc"
>  - reg: Offset of ADC instance in ADC block (e.g. may be 0x0, 0x100, 0x200).
>  - clocks: Input clock private to this ADC instance. It's required only on
>    stm32f4, that has per instance clock input for registers access.
> -- 
> 1.9.1
> 

^ permalink raw reply	[flat|nested] 29+ messages in thread
* [PATCH 1/3] dt-bindings: iio: stm32-adc: add support for STM32MP1.
@ 2018-04-24 16:27     ` Rob Herring
  0 siblings, 0 replies; 29+ messages in thread
From: Rob Herring @ 2018-04-24 16:27 UTC (permalink / raw)
  To: linux-arm-kernel

On Wed, Apr 18, 2018 at 05:37:52PM +0200, Fabrice Gasnier wrote:
> Document support for STM32MP1 ADC. It's quite similar to STM32H7 ADC.
> Introduce "st,stm32mp1-adc" compatible to handle variants of this
> hardware such as vregready flag, interrupts, clock rate.
> 
> Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com>
> ---
>  Documentation/devicetree/bindings/iio/adc/st,stm32-adc.txt | 6 +++++-
>  1 file changed, 5 insertions(+), 1 deletion(-)
> 
> diff --git a/Documentation/devicetree/bindings/iio/adc/st,stm32-adc.txt b/Documentation/devicetree/bindings/iio/adc/st,stm32-adc.txt
> index e8bb824..9994384 100644
> --- a/Documentation/devicetree/bindings/iio/adc/st,stm32-adc.txt
> +++ b/Documentation/devicetree/bindings/iio/adc/st,stm32-adc.txt
> @@ -24,8 +24,11 @@ Required properties:
>  - compatible: Should be one of:
>    "st,stm32f4-adc-core"
>    "st,stm32h7-adc-core"
> +  "st,stm32mp1-adc-core"
>  - reg: Offset and length of the ADC block register set.
> -- interrupts: Must contain the interrupt for ADC block.
> +- interrupts: One or more interrupts for ADC block. Some parts like stm32f4
> +  and stm32h7 share a common ADC interrupt line. stm32mp1 has separate
> +  lines for each ADC within ADC block.

How many interrupt lines is that?

>  - clocks: Core can use up to two clocks, depending on part used:
>    - "adc" clock: for the analog circuitry, common to all ADCs.
>      It's required on stm32f4.
> @@ -53,6 +56,7 @@ Required properties:
>  - compatible: Should be one of:
>    "st,stm32f4-adc"
>    "st,stm32h7-adc"
> +  "st,stm32mp1-adc"
>  - reg: Offset of ADC instance in ADC block (e.g. may be 0x0, 0x100, 0x200).
>  - clocks: Input clock private to this ADC instance. It's required only on
>    stm32f4, that has per instance clock input for registers access.
> -- 
> 1.9.1
> 

^ permalink raw reply	[flat|nested] 29+ messages in thread
* Re: [PATCH 1/3] dt-bindings: iio: stm32-adc: add support for STM32MP1.
  2018-04-24 16:27     ` Rob Herring
  (?)
@ 2018-04-25  7:22       ` Fabrice Gasnier
  -1 siblings, 0 replies; 29+ messages in thread
From: Fabrice Gasnier @ 2018-04-25  7:22 UTC (permalink / raw)
  To: Rob Herring
  Cc: jic23, alexandre.torgue, mark.rutland, mcoquelin.stm32, lars,
	knaack.h, pmeerw, linux-iio, devicetree, linux-arm-kernel,
	linux-kernel, benjamin.gaignard

On 04/24/2018 06:27 PM, Rob Herring wrote:
> On Wed, Apr 18, 2018 at 05:37:52PM +0200, Fabrice Gasnier wrote:
>> Document support for STM32MP1 ADC. It's quite similar to STM32H7 ADC.
>> Introduce "st,stm32mp1-adc" compatible to handle variants of this
>> hardware such as vregready flag, interrupts, clock rate.
>>
>> Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com>
>> ---
>>  Documentation/devicetree/bindings/iio/adc/st,stm32-adc.txt | 6 +++++-
>>  1 file changed, 5 insertions(+), 1 deletion(-)
>>
>> diff --git a/Documentation/devicetree/bindings/iio/adc/st,stm32-adc.txt b/Documentation/devicetree/bindings/iio/adc/st,stm32-adc.txt
>> index e8bb824..9994384 100644
>> --- a/Documentation/devicetree/bindings/iio/adc/st,stm32-adc.txt
>> +++ b/Documentation/devicetree/bindings/iio/adc/st,stm32-adc.txt
>> @@ -24,8 +24,11 @@ Required properties:
>>  - compatible: Should be one of:
>>    "st,stm32f4-adc-core"
>>    "st,stm32h7-adc-core"
>> +  "st,stm32mp1-adc-core"
>>  - reg: Offset and length of the ADC block register set.
>> -- interrupts: Must contain the interrupt for ADC block.
>> +- interrupts: One or more interrupts for ADC block. Some parts like stm32f4
>> +  and stm32h7 share a common ADC interrupt line. stm32mp1 has separate
>> +  lines for each ADC within ADC block.
> 
> How many interrupt lines is that?

Hi Rob, Jonathan,

I should have mentioned this: stm32mp1 has two separate interrupt lines
for each ADC within ADC block.

Do you wish I send a V2 for this ? Or a patch to fix this ?

Please let me know,
BR,
Fabrice

> 
>>  - clocks: Core can use up to two clocks, depending on part used:
>>    - "adc" clock: for the analog circuitry, common to all ADCs.
>>      It's required on stm32f4.
>> @@ -53,6 +56,7 @@ Required properties:
>>  - compatible: Should be one of:
>>    "st,stm32f4-adc"
>>    "st,stm32h7-adc"
>> +  "st,stm32mp1-adc"
>>  - reg: Offset of ADC instance in ADC block (e.g. may be 0x0, 0x100, 0x200).
>>  - clocks: Input clock private to this ADC instance. It's required only on
>>    stm32f4, that has per instance clock input for registers access.
>> -- 
>> 1.9.1
>>

^ permalink raw reply	[flat|nested] 29+ messages in thread
* Re: [PATCH 1/3] dt-bindings: iio: stm32-adc: add support for STM32MP1.
@ 2018-04-25  7:22       ` Fabrice Gasnier
  0 siblings, 0 replies; 29+ messages in thread
From: Fabrice Gasnier @ 2018-04-25  7:22 UTC (permalink / raw)
  To: Rob Herring
  Cc: jic23, alexandre.torgue, mark.rutland, mcoquelin.stm32, lars,
	knaack.h, pmeerw, linux-iio, devicetree, linux-arm-kernel,
	linux-kernel, benjamin.gaignard

On 04/24/2018 06:27 PM, Rob Herring wrote:
> On Wed, Apr 18, 2018 at 05:37:52PM +0200, Fabrice Gasnier wrote:
>> Document support for STM32MP1 ADC. It's quite similar to STM32H7 ADC.
>> Introduce "st,stm32mp1-adc" compatible to handle variants of this
>> hardware such as vregready flag, interrupts, clock rate.
>>
>> Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com>
>> ---
>>  Documentation/devicetree/bindings/iio/adc/st,stm32-adc.txt | 6 +++++-
>>  1 file changed, 5 insertions(+), 1 deletion(-)
>>
>> diff --git a/Documentation/devicetree/bindings/iio/adc/st,stm32-adc.txt b/Documentation/devicetree/bindings/iio/adc/st,stm32-adc.txt
>> index e8bb824..9994384 100644
>> --- a/Documentation/devicetree/bindings/iio/adc/st,stm32-adc.txt
>> +++ b/Documentation/devicetree/bindings/iio/adc/st,stm32-adc.txt
>> @@ -24,8 +24,11 @@ Required properties:
>>  - compatible: Should be one of:
>>    "st,stm32f4-adc-core"
>>    "st,stm32h7-adc-core"
>> +  "st,stm32mp1-adc-core"
>>  - reg: Offset and length of the ADC block register set.
>> -- interrupts: Must contain the interrupt for ADC block.
>> +- interrupts: One or more interrupts for ADC block. Some parts like stm32f4
>> +  and stm32h7 share a common ADC interrupt line. stm32mp1 has separate
>> +  lines for each ADC within ADC block.
> 
> How many interrupt lines is that?

Hi Rob, Jonathan,

I should have mentioned this: stm32mp1 has two separate interrupt lines
for each ADC within ADC block.

Do you wish I send a V2 for this ? Or a patch to fix this ?

Please let me know,
BR,
Fabrice

> 
>>  - clocks: Core can use up to two clocks, depending on part used:
>>    - "adc" clock: for the analog circuitry, common to all ADCs.
>>      It's required on stm32f4.
>> @@ -53,6 +56,7 @@ Required properties:
>>  - compatible: Should be one of:
>>    "st,stm32f4-adc"
>>    "st,stm32h7-adc"
>> +  "st,stm32mp1-adc"
>>  - reg: Offset of ADC instance in ADC block (e.g. may be 0x0, 0x100, 0x200).
>>  - clocks: Input clock private to this ADC instance. It's required only on
>>    stm32f4, that has per instance clock input for registers access.
>> -- 
>> 1.9.1
>>

^ permalink raw reply	[flat|nested] 29+ messages in thread
* [PATCH 1/3] dt-bindings: iio: stm32-adc: add support for STM32MP1.
@ 2018-04-25  7:22       ` Fabrice Gasnier
  0 siblings, 0 replies; 29+ messages in thread
From: Fabrice Gasnier @ 2018-04-25  7:22 UTC (permalink / raw)
  To: linux-arm-kernel

On 04/24/2018 06:27 PM, Rob Herring wrote:
> On Wed, Apr 18, 2018 at 05:37:52PM +0200, Fabrice Gasnier wrote:
>> Document support for STM32MP1 ADC. It's quite similar to STM32H7 ADC.
>> Introduce "st,stm32mp1-adc" compatible to handle variants of this
>> hardware such as vregready flag, interrupts, clock rate.
>>
>> Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com>
>> ---
>>  Documentation/devicetree/bindings/iio/adc/st,stm32-adc.txt | 6 +++++-
>>  1 file changed, 5 insertions(+), 1 deletion(-)
>>
>> diff --git a/Documentation/devicetree/bindings/iio/adc/st,stm32-adc.txt b/Documentation/devicetree/bindings/iio/adc/st,stm32-adc.txt
>> index e8bb824..9994384 100644
>> --- a/Documentation/devicetree/bindings/iio/adc/st,stm32-adc.txt
>> +++ b/Documentation/devicetree/bindings/iio/adc/st,stm32-adc.txt
>> @@ -24,8 +24,11 @@ Required properties:
>>  - compatible: Should be one of:
>>    "st,stm32f4-adc-core"
>>    "st,stm32h7-adc-core"
>> +  "st,stm32mp1-adc-core"
>>  - reg: Offset and length of the ADC block register set.
>> -- interrupts: Must contain the interrupt for ADC block.
>> +- interrupts: One or more interrupts for ADC block. Some parts like stm32f4
>> +  and stm32h7 share a common ADC interrupt line. stm32mp1 has separate
>> +  lines for each ADC within ADC block.
> 
> How many interrupt lines is that?

Hi Rob, Jonathan,

I should have mentioned this: stm32mp1 has two separate interrupt lines
for each ADC within ADC block.

Do you wish I send a V2 for this ? Or a patch to fix this ?

Please let me know,
BR,
Fabrice

> 
>>  - clocks: Core can use up to two clocks, depending on part used:
>>    - "adc" clock: for the analog circuitry, common to all ADCs.
>>      It's required on stm32f4.
>> @@ -53,6 +56,7 @@ Required properties:
>>  - compatible: Should be one of:
>>    "st,stm32f4-adc"
>>    "st,stm32h7-adc"
>> +  "st,stm32mp1-adc"
>>  - reg: Offset of ADC instance in ADC block (e.g. may be 0x0, 0x100, 0x200).
>>  - clocks: Input clock private to this ADC instance. It's required only on
>>    stm32f4, that has per instance clock input for registers access.
>> -- 
>> 1.9.1
>>

^ permalink raw reply	[flat|nested] 29+ messages in thread
* Re: [PATCH 1/3] dt-bindings: iio: stm32-adc: add support for STM32MP1.
  2018-04-25  7:22       ` Fabrice Gasnier
  (?)
@ 2018-04-28 15:18         ` Jonathan Cameron
  -1 siblings, 0 replies; 29+ messages in thread
From: Jonathan Cameron @ 2018-04-28 15:18 UTC (permalink / raw)
  To: Fabrice Gasnier
  Cc: Rob Herring, alexandre.torgue, mark.rutland, mcoquelin.stm32,
	lars, knaack.h, pmeerw, linux-iio, devicetree, linux-arm-kernel,
	linux-kernel, benjamin.gaignard

On Wed, 25 Apr 2018 09:22:02 +0200
Fabrice Gasnier <fabrice.gasnier@st.com> wrote:

> On 04/24/2018 06:27 PM, Rob Herring wrote:
> > On Wed, Apr 18, 2018 at 05:37:52PM +0200, Fabrice Gasnier wrote:  
> >> Document support for STM32MP1 ADC. It's quite similar to STM32H7 ADC.
> >> Introduce "st,stm32mp1-adc" compatible to handle variants of this
> >> hardware such as vregready flag, interrupts, clock rate.
> >>
> >> Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com>
> >> ---
> >>  Documentation/devicetree/bindings/iio/adc/st,stm32-adc.txt | 6 +++++-
> >>  1 file changed, 5 insertions(+), 1 deletion(-)
> >>
> >> diff --git a/Documentation/devicetree/bindings/iio/adc/st,stm32-adc.txt b/Documentation/devicetree/bindings/iio/adc/st,stm32-adc.txt
> >> index e8bb824..9994384 100644
> >> --- a/Documentation/devicetree/bindings/iio/adc/st,stm32-adc.txt
> >> +++ b/Documentation/devicetree/bindings/iio/adc/st,stm32-adc.txt
> >> @@ -24,8 +24,11 @@ Required properties:
> >>  - compatible: Should be one of:
> >>    "st,stm32f4-adc-core"
> >>    "st,stm32h7-adc-core"
> >> +  "st,stm32mp1-adc-core"
> >>  - reg: Offset and length of the ADC block register set.
> >> -- interrupts: Must contain the interrupt for ADC block.
> >> +- interrupts: One or more interrupts for ADC block. Some parts like stm32f4
> >> +  and stm32h7 share a common ADC interrupt line. stm32mp1 has separate
> >> +  lines for each ADC within ADC block.  
> > 
> > How many interrupt lines is that?  
> 
> Hi Rob, Jonathan,
> 
> I should have mentioned this: stm32mp1 has two separate interrupt lines
> for each ADC within ADC block.
> 
> Do you wish I send a V2 for this ? Or a patch to fix this ?
Hmm. I haven't pushed this out as non rebasing so I'll revert this
and the associated support so you can clean this corner up.

So please send a V2.

Thanks,

Jonathan

> 
> Please let me know,
> BR,
> Fabrice
> 
> >   
> >>  - clocks: Core can use up to two clocks, depending on part used:
> >>    - "adc" clock: for the analog circuitry, common to all ADCs.
> >>      It's required on stm32f4.
> >> @@ -53,6 +56,7 @@ Required properties:
> >>  - compatible: Should be one of:
> >>    "st,stm32f4-adc"
> >>    "st,stm32h7-adc"
> >> +  "st,stm32mp1-adc"
> >>  - reg: Offset of ADC instance in ADC block (e.g. may be 0x0, 0x100, 0x200).
> >>  - clocks: Input clock private to this ADC instance. It's required only on
> >>    stm32f4, that has per instance clock input for registers access.
> >> -- 
> >> 1.9.1
> >>  
> --
> To unsubscribe from this list: send the line "unsubscribe linux-iio" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html

^ permalink raw reply	[flat|nested] 29+ messages in thread
* Re: [PATCH 1/3] dt-bindings: iio: stm32-adc: add support for STM32MP1.
@ 2018-04-28 15:18         ` Jonathan Cameron
  0 siblings, 0 replies; 29+ messages in thread
From: Jonathan Cameron @ 2018-04-28 15:18 UTC (permalink / raw)
  To: Fabrice Gasnier
  Cc: mark.rutland, Rob Herring, benjamin.gaignard, lars,
	alexandre.torgue, devicetree, linux-iio, pmeerw, linux-kernel,
	mcoquelin.stm32, knaack.h, linux-arm-kernel

On Wed, 25 Apr 2018 09:22:02 +0200
Fabrice Gasnier <fabrice.gasnier@st.com> wrote:

> On 04/24/2018 06:27 PM, Rob Herring wrote:
> > On Wed, Apr 18, 2018 at 05:37:52PM +0200, Fabrice Gasnier wrote:  
> >> Document support for STM32MP1 ADC. It's quite similar to STM32H7 ADC.
> >> Introduce "st,stm32mp1-adc" compatible to handle variants of this
> >> hardware such as vregready flag, interrupts, clock rate.
> >>
> >> Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com>
> >> ---
> >>  Documentation/devicetree/bindings/iio/adc/st,stm32-adc.txt | 6 +++++-
> >>  1 file changed, 5 insertions(+), 1 deletion(-)
> >>
> >> diff --git a/Documentation/devicetree/bindings/iio/adc/st,stm32-adc.txt b/Documentation/devicetree/bindings/iio/adc/st,stm32-adc.txt
> >> index e8bb824..9994384 100644
> >> --- a/Documentation/devicetree/bindings/iio/adc/st,stm32-adc.txt
> >> +++ b/Documentation/devicetree/bindings/iio/adc/st,stm32-adc.txt
> >> @@ -24,8 +24,11 @@ Required properties:
> >>  - compatible: Should be one of:
> >>    "st,stm32f4-adc-core"
> >>    "st,stm32h7-adc-core"
> >> +  "st,stm32mp1-adc-core"
> >>  - reg: Offset and length of the ADC block register set.
> >> -- interrupts: Must contain the interrupt for ADC block.
> >> +- interrupts: One or more interrupts for ADC block. Some parts like stm32f4
> >> +  and stm32h7 share a common ADC interrupt line. stm32mp1 has separate
> >> +  lines for each ADC within ADC block.  
> > 
> > How many interrupt lines is that?  
> 
> Hi Rob, Jonathan,
> 
> I should have mentioned this: stm32mp1 has two separate interrupt lines
> for each ADC within ADC block.
> 
> Do you wish I send a V2 for this ? Or a patch to fix this ?
Hmm. I haven't pushed this out as non rebasing so I'll revert this
and the associated support so you can clean this corner up.

So please send a V2.

Thanks,

Jonathan

> 
> Please let me know,
> BR,
> Fabrice
> 
> >   
> >>  - clocks: Core can use up to two clocks, depending on part used:
> >>    - "adc" clock: for the analog circuitry, common to all ADCs.
> >>      It's required on stm32f4.
> >> @@ -53,6 +56,7 @@ Required properties:
> >>  - compatible: Should be one of:
> >>    "st,stm32f4-adc"
> >>    "st,stm32h7-adc"
> >> +  "st,stm32mp1-adc"
> >>  - reg: Offset of ADC instance in ADC block (e.g. may be 0x0, 0x100, 0x200).
> >>  - clocks: Input clock private to this ADC instance. It's required only on
> >>    stm32f4, that has per instance clock input for registers access.
> >> -- 
> >> 1.9.1
> >>  
> --
> To unsubscribe from this list: send the line "unsubscribe linux-iio" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html

^ permalink raw reply	[flat|nested] 29+ messages in thread
* [PATCH 1/3] dt-bindings: iio: stm32-adc: add support for STM32MP1.
@ 2018-04-28 15:18         ` Jonathan Cameron
  0 siblings, 0 replies; 29+ messages in thread
From: Jonathan Cameron @ 2018-04-28 15:18 UTC (permalink / raw)
  To: linux-arm-kernel

On Wed, 25 Apr 2018 09:22:02 +0200
Fabrice Gasnier <fabrice.gasnier@st.com> wrote:

> On 04/24/2018 06:27 PM, Rob Herring wrote:
> > On Wed, Apr 18, 2018 at 05:37:52PM +0200, Fabrice Gasnier wrote:  
> >> Document support for STM32MP1 ADC. It's quite similar to STM32H7 ADC.
> >> Introduce "st,stm32mp1-adc" compatible to handle variants of this
> >> hardware such as vregready flag, interrupts, clock rate.
> >>
> >> Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com>
> >> ---
> >>  Documentation/devicetree/bindings/iio/adc/st,stm32-adc.txt | 6 +++++-
> >>  1 file changed, 5 insertions(+), 1 deletion(-)
> >>
> >> diff --git a/Documentation/devicetree/bindings/iio/adc/st,stm32-adc.txt b/Documentation/devicetree/bindings/iio/adc/st,stm32-adc.txt
> >> index e8bb824..9994384 100644
> >> --- a/Documentation/devicetree/bindings/iio/adc/st,stm32-adc.txt
> >> +++ b/Documentation/devicetree/bindings/iio/adc/st,stm32-adc.txt
> >> @@ -24,8 +24,11 @@ Required properties:
> >>  - compatible: Should be one of:
> >>    "st,stm32f4-adc-core"
> >>    "st,stm32h7-adc-core"
> >> +  "st,stm32mp1-adc-core"
> >>  - reg: Offset and length of the ADC block register set.
> >> -- interrupts: Must contain the interrupt for ADC block.
> >> +- interrupts: One or more interrupts for ADC block. Some parts like stm32f4
> >> +  and stm32h7 share a common ADC interrupt line. stm32mp1 has separate
> >> +  lines for each ADC within ADC block.  
> > 
> > How many interrupt lines is that?  
> 
> Hi Rob, Jonathan,
> 
> I should have mentioned this: stm32mp1 has two separate interrupt lines
> for each ADC within ADC block.
> 
> Do you wish I send a V2 for this ? Or a patch to fix this ?
Hmm. I haven't pushed this out as non rebasing so I'll revert this
and the associated support so you can clean this corner up.

So please send a V2.

Thanks,

Jonathan

> 
> Please let me know,
> BR,
> Fabrice
> 
> >   
> >>  - clocks: Core can use up to two clocks, depending on part used:
> >>    - "adc" clock: for the analog circuitry, common to all ADCs.
> >>      It's required on stm32f4.
> >> @@ -53,6 +56,7 @@ Required properties:
> >>  - compatible: Should be one of:
> >>    "st,stm32f4-adc"
> >>    "st,stm32h7-adc"
> >> +  "st,stm32mp1-adc"
> >>  - reg: Offset of ADC instance in ADC block (e.g. may be 0x0, 0x100, 0x200).
> >>  - clocks: Input clock private to this ADC instance. It's required only on
> >>    stm32f4, that has per instance clock input for registers access.
> >> -- 
> >> 1.9.1
> >>  
> --
> To unsubscribe from this list: send the line "unsubscribe linux-iio" in
> the body of a message to majordomo at vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html

^ permalink raw reply	[flat|nested] 29+ messages in thread
end of thread, other threads:[~2018-04-28 15:18 UTC | newest]

Thread overview: 29+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2018-04-18 15:37 [PATCH 0/3] Add support for STM32MP1 ADC Fabrice Gasnier
2018-04-18 15:37 ` Fabrice Gasnier
2018-04-18 15:37 ` Fabrice Gasnier
2018-04-18 15:37 ` [PATCH 1/3] dt-bindings: iio: stm32-adc: add support for STM32MP1 Fabrice Gasnier
2018-04-18 15:37   ` Fabrice Gasnier
2018-04-18 15:37   ` Fabrice Gasnier
2018-04-21 15:36   ` Jonathan Cameron
2018-04-21 15:36     ` Jonathan Cameron
2018-04-21 15:36     ` Jonathan Cameron
2018-04-24 16:27   ` Rob Herring
2018-04-24 16:27     ` Rob Herring
2018-04-25  7:22     ` Fabrice Gasnier
2018-04-25  7:22       ` Fabrice Gasnier
2018-04-25  7:22       ` Fabrice Gasnier
2018-04-28 15:18       ` Jonathan Cameron
2018-04-28 15:18         ` Jonathan Cameron
2018-04-28 15:18         ` Jonathan Cameron
2018-04-18 15:37 ` [PATCH 2/3] iio: adc: " Fabrice Gasnier
2018-04-18 15:37   ` Fabrice Gasnier
2018-04-18 15:37   ` Fabrice Gasnier
2018-04-21 15:36   ` Jonathan Cameron
2018-04-21 15:36     ` Jonathan Cameron
2018-04-21 15:36     ` Jonathan Cameron
2018-04-18 15:37 ` [PATCH 3/3] ARM: dts: stm32: Add ADC support to stm32mp157c Fabrice Gasnier
2018-04-18 15:37   ` Fabrice Gasnier
2018-04-18 15:37   ` Fabrice Gasnier
2018-04-21 15:37   ` Jonathan Cameron
2018-04-21 15:37     ` Jonathan Cameron
2018-04-21 15:37     ` Jonathan Cameron

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.