From: Anson Huang <Anson.Huang@nxp.com> To: shawnguo@kernel.org, kernel@pengutronix.de, fabio.estevam@nxp.com, robh+dt@kernel.org, mark.rutland@arm.com, mturquette@baylibre.com, sboyd@kernel.org, shengjiu.wang@nxp.com Cc: Linux-imx@nxp.com, linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-clk@vger.kernel.org Subject: [PATCH V3 2/2] ARM: dts: imx6sx-sabreauto: add external 24MHz clock source Date: Fri, 20 Apr 2018 15:38:11 +0800 [thread overview] Message-ID: <1524209891-14146-2-git-send-email-Anson.Huang@nxp.com> (raw) In-Reply-To: <1524209891-14146-1-git-send-email-Anson.Huang@nxp.com> On i.MX6SX SabreAuto board, there is external 24MHz clock source for analog clock2, add this clock source to clock tree and remove "clocks" container for all input clocks. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> --- changes since V2: remove "clocks" container and use new way for all input clocks definition. arch/arm/boot/dts/imx6sx-sabreauto.dts | 4 ++ arch/arm/boot/dts/imx6sx.dtsi | 71 ++++++++++++++++++---------------- 2 files changed, 42 insertions(+), 33 deletions(-) diff --git a/arch/arm/boot/dts/imx6sx-sabreauto.dts b/arch/arm/boot/dts/imx6sx-sabreauto.dts index 72da5ac..57d1ea0 100644 --- a/arch/arm/boot/dts/imx6sx-sabreauto.dts +++ b/arch/arm/boot/dts/imx6sx-sabreauto.dts @@ -37,6 +37,10 @@ }; }; +&anaclk2 { + clock-frequency = <24576000>; +}; + &uart1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart1>; diff --git a/arch/arm/boot/dts/imx6sx.dtsi b/arch/arm/boot/dts/imx6sx.dtsi index 49c7205..7e463d2 100644 --- a/arch/arm/boot/dts/imx6sx.dtsi +++ b/arch/arm/boot/dts/imx6sx.dtsi @@ -104,41 +104,46 @@ interrupt-parent = <&intc>; }; - clocks { - #address-cells = <1>; - #size-cells = <0>; + ckil: clock-ckil { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + clock-output-names = "ckil"; + }; - ckil: clock@0 { - compatible = "fixed-clock"; - reg = <0>; - #clock-cells = <0>; - clock-frequency = <32768>; - clock-output-names = "ckil"; - }; + osc: clock-osc { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <24000000>; + clock-output-names = "osc"; + }; - osc: clock@1 { - compatible = "fixed-clock"; - reg = <1>; - #clock-cells = <0>; - clock-frequency = <24000000>; - clock-output-names = "osc"; - }; + ipp_di0: clock-ipp-di0 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + clock-output-names = "ipp_di0"; + }; - ipp_di0: clock@2 { - compatible = "fixed-clock"; - reg = <2>; - #clock-cells = <0>; - clock-frequency = <0>; - clock-output-names = "ipp_di0"; - }; + ipp_di1: clock-ipp-di1 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + clock-output-names = "ipp_di1"; + }; - ipp_di1: clock@3 { - compatible = "fixed-clock"; - reg = <3>; - #clock-cells = <0>; - clock-frequency = <0>; - clock-output-names = "ipp_di1"; - }; + anaclk1: clock-anaclk1 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + clock-output-names = "anaclk1"; + }; + + anaclk2: clock-anaclk2 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + clock-output-names = "anaclk2"; }; tempmon: tempmon { @@ -575,8 +580,8 @@ interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>; #clock-cells = <1>; - clocks = <&ckil>, <&osc>, <&ipp_di0>, <&ipp_di1>; - clock-names = "ckil", "osc", "ipp_di0", "ipp_di1"; + clocks = <&ckil>, <&osc>, <&ipp_di0>, <&ipp_di1>, <&anaclk1>, <&anaclk2>; + clock-names = "ckil", "osc", "ipp_di0", "ipp_di1", "anaclk1", "anaclk2"; }; anatop: anatop@20c8000 { -- 2.7.4
WARNING: multiple messages have this Message-ID (diff)
From: Anson.Huang@nxp.com (Anson Huang) To: linux-arm-kernel@lists.infradead.org Subject: [PATCH V3 2/2] ARM: dts: imx6sx-sabreauto: add external 24MHz clock source Date: Fri, 20 Apr 2018 15:38:11 +0800 [thread overview] Message-ID: <1524209891-14146-2-git-send-email-Anson.Huang@nxp.com> (raw) In-Reply-To: <1524209891-14146-1-git-send-email-Anson.Huang@nxp.com> On i.MX6SX SabreAuto board, there is external 24MHz clock source for analog clock2, add this clock source to clock tree and remove "clocks" container for all input clocks. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> --- changes since V2: remove "clocks" container and use new way for all input clocks definition. arch/arm/boot/dts/imx6sx-sabreauto.dts | 4 ++ arch/arm/boot/dts/imx6sx.dtsi | 71 ++++++++++++++++++---------------- 2 files changed, 42 insertions(+), 33 deletions(-) diff --git a/arch/arm/boot/dts/imx6sx-sabreauto.dts b/arch/arm/boot/dts/imx6sx-sabreauto.dts index 72da5ac..57d1ea0 100644 --- a/arch/arm/boot/dts/imx6sx-sabreauto.dts +++ b/arch/arm/boot/dts/imx6sx-sabreauto.dts @@ -37,6 +37,10 @@ }; }; +&anaclk2 { + clock-frequency = <24576000>; +}; + &uart1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart1>; diff --git a/arch/arm/boot/dts/imx6sx.dtsi b/arch/arm/boot/dts/imx6sx.dtsi index 49c7205..7e463d2 100644 --- a/arch/arm/boot/dts/imx6sx.dtsi +++ b/arch/arm/boot/dts/imx6sx.dtsi @@ -104,41 +104,46 @@ interrupt-parent = <&intc>; }; - clocks { - #address-cells = <1>; - #size-cells = <0>; + ckil: clock-ckil { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + clock-output-names = "ckil"; + }; - ckil: clock at 0 { - compatible = "fixed-clock"; - reg = <0>; - #clock-cells = <0>; - clock-frequency = <32768>; - clock-output-names = "ckil"; - }; + osc: clock-osc { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <24000000>; + clock-output-names = "osc"; + }; - osc: clock at 1 { - compatible = "fixed-clock"; - reg = <1>; - #clock-cells = <0>; - clock-frequency = <24000000>; - clock-output-names = "osc"; - }; + ipp_di0: clock-ipp-di0 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + clock-output-names = "ipp_di0"; + }; - ipp_di0: clock at 2 { - compatible = "fixed-clock"; - reg = <2>; - #clock-cells = <0>; - clock-frequency = <0>; - clock-output-names = "ipp_di0"; - }; + ipp_di1: clock-ipp-di1 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + clock-output-names = "ipp_di1"; + }; - ipp_di1: clock at 3 { - compatible = "fixed-clock"; - reg = <3>; - #clock-cells = <0>; - clock-frequency = <0>; - clock-output-names = "ipp_di1"; - }; + anaclk1: clock-anaclk1 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + clock-output-names = "anaclk1"; + }; + + anaclk2: clock-anaclk2 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + clock-output-names = "anaclk2"; }; tempmon: tempmon { @@ -575,8 +580,8 @@ interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>; #clock-cells = <1>; - clocks = <&ckil>, <&osc>, <&ipp_di0>, <&ipp_di1>; - clock-names = "ckil", "osc", "ipp_di0", "ipp_di1"; + clocks = <&ckil>, <&osc>, <&ipp_di0>, <&ipp_di1>, <&anaclk1>, <&anaclk2>; + clock-names = "ckil", "osc", "ipp_di0", "ipp_di1", "anaclk1", "anaclk2"; }; anatop: anatop at 20c8000 { -- 2.7.4
next prev parent reply other threads:[~2018-04-20 7:42 UTC|newest] Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top 2018-04-20 7:38 [PATCH V3 1/2] clk: imx6sx: add missing lvds2 clock to the clock tree Anson Huang 2018-04-20 7:38 ` Anson Huang 2018-04-20 7:38 ` Anson Huang [this message] 2018-04-20 7:38 ` [PATCH V3 2/2] ARM: dts: imx6sx-sabreauto: add external 24MHz clock source Anson Huang 2018-05-02 13:19 ` Shawn Guo 2018-05-02 13:19 ` Shawn Guo 2018-05-02 13:15 ` [PATCH V3 1/2] clk: imx6sx: add missing lvds2 clock to the clock tree Shawn Guo 2018-05-02 13:15 ` Shawn Guo 2018-05-05 2:57 ` Stephen Boyd 2018-05-05 2:57 ` Stephen Boyd 2018-05-05 2:57 ` Stephen Boyd
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=1524209891-14146-2-git-send-email-Anson.Huang@nxp.com \ --to=anson.huang@nxp.com \ --cc=Linux-imx@nxp.com \ --cc=devicetree@vger.kernel.org \ --cc=fabio.estevam@nxp.com \ --cc=kernel@pengutronix.de \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-clk@vger.kernel.org \ --cc=linux-kernel@vger.kernel.org \ --cc=mark.rutland@arm.com \ --cc=mturquette@baylibre.com \ --cc=robh+dt@kernel.org \ --cc=sboyd@kernel.org \ --cc=shawnguo@kernel.org \ --cc=shengjiu.wang@nxp.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.