From: Ilia Lin <ilialin@codeaurora.org>
To: mturquette@baylibre.com, sboyd@kernel.org, robh@kernel.org,
mark.rutland@arm.com, viresh.kumar@linaro.org, nm@ti.com,
lgirdwood@gmail.com, broonie@kernel.org, andy.gross@linaro.org,
david.brown@linaro.org, catalin.marinas@arm.com,
will.deacon@arm.com, rjw@rjwysocki.net,
linux-clk@vger.kernel.org
Cc: devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-pm@vger.kernel.org, linux-arm-msm@vger.kernel.org,
linux-soc@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
rnayak@codeaurora.org, ilialin@codeaurora.org,
amit.kucheria@linaro.org, nicolas.dechesne@linaro.org,
celster@codeaurora.org, tfinkel@codeaurora.org
Subject: [PATCH v6 08/14] dt: qcom: Add opp and thermal to the msm8996
Date: Mon, 14 May 2018 16:11:54 +0300 [thread overview]
Message-ID: <1526303520-5843-9-git-send-email-ilialin@codeaurora.org> (raw)
In-Reply-To: <1526303520-5843-1-git-send-email-ilialin@codeaurora.org>
Signed-off-by: Ilia Lin <ilialin@codeaurora.org>
---
arch/arm64/boot/dts/qcom/msm8996.dtsi | 269 ++++++++++++++++++++++++++++++++--
1 file changed, 260 insertions(+), 9 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi b/arch/arm64/boot/dts/qcom/msm8996.dtsi
index 37b7152c..e6cf290 100644
--- a/arch/arm64/boot/dts/qcom/msm8996.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi
@@ -14,6 +14,7 @@
#include <dt-bindings/clock/qcom,gcc-msm8996.h>
#include <dt-bindings/clock/qcom,mmcc-msm8996.h>
#include <dt-bindings/clock/qcom,rpmcc.h>
+#include <dt-bindings/thermal/thermal.h>
/ {
model = "Qualcomm Technologies, Inc. MSM8996";
@@ -97,6 +98,9 @@
compatible = "qcom,kryo";
reg = <0x0 0x0>;
enable-method = "psci";
+ clocks = <&kryocc 0>;
+ operating-points-v2 = <&cluster0_opp>;
+ #cooling-cells = <2>;
next-level-cache = <&L2_0>;
L2_0: l2-cache {
compatible = "cache";
@@ -109,6 +113,9 @@
compatible = "qcom,kryo";
reg = <0x0 0x1>;
enable-method = "psci";
+ clocks = <&kryocc 0>;
+ operating-points-v2 = <&cluster0_opp>;
+ #cooling-cells = <2>;
next-level-cache = <&L2_0>;
};
@@ -117,6 +124,9 @@
compatible = "qcom,kryo";
reg = <0x0 0x100>;
enable-method = "psci";
+ clocks = <&kryocc 1>;
+ operating-points-v2 = <&cluster1_opp>;
+ #cooling-cells = <2>;
next-level-cache = <&L2_1>;
L2_1: l2-cache {
compatible = "cache";
@@ -129,6 +139,9 @@
compatible = "qcom,kryo";
reg = <0x0 0x101>;
enable-method = "psci";
+ clocks = <&kryocc 1>;
+ operating-points-v2 = <&cluster1_opp>;
+ #cooling-cells = <2>;
next-level-cache = <&L2_1>;
};
@@ -155,6 +168,182 @@
};
};
+ cluster0_opp: opp_table0 {
+ compatible = "operating-points-v2";
+ opp-shared;
+
+ opp-307200000 {
+ opp-hz = /bits/ 64 <307200000>;
+ clock-latency-ns = <200000>;
+ };
+ opp-422400000 {
+ opp-hz = /bits/ 64 <422400000>;
+ clock-latency-ns = <200000>;
+ };
+ opp-480000000 {
+ opp-hz = /bits/ 64 <480000000>;
+ clock-latency-ns = <200000>;
+ };
+ opp-556800000 {
+ opp-hz = /bits/ 64 <556800000>;
+ clock-latency-ns = <200000>;
+ };
+ opp-652800000 {
+ opp-hz = /bits/ 64 <652800000>;
+ clock-latency-ns = <200000>;
+ };
+ opp-729600000 {
+ opp-hz = /bits/ 64 <729600000>;
+ clock-latency-ns = <200000>;
+ };
+ opp-844800000 {
+ opp-hz = /bits/ 64 <844800000>;
+ clock-latency-ns = <200000>;
+ };
+ opp-960000000 {
+ opp-hz = /bits/ 64 <960000000>;
+ clock-latency-ns = <200000>;
+ };
+ opp-1036800000 {
+ opp-hz = /bits/ 64 <1036800000>;
+ clock-latency-ns = <200000>;
+ };
+ opp-1113600000 {
+ opp-hz = /bits/ 64 <1113600000>;
+ clock-latency-ns = <200000>;
+ };
+ opp-1190400000 {
+ opp-hz = /bits/ 64 <1190400000>;
+ clock-latency-ns = <200000>;
+ };
+ opp-1228800000 {
+ opp-hz = /bits/ 64 <1228800000>;
+ clock-latency-ns = <200000>;
+ };
+ opp-1324800000 {
+ opp-hz = /bits/ 64 <1324800000>;
+ clock-latency-ns = <200000>;
+ };
+ opp-1401600000 {
+ opp-hz = /bits/ 64 <1401600000>;
+ clock-latency-ns = <200000>;
+ };
+ opp-1478400000 {
+ opp-hz = /bits/ 64 <1478400000>;
+ clock-latency-ns = <200000>;
+ };
+ opp-1593600000 {
+ opp-hz = /bits/ 64 <1593600000>;
+ clock-latency-ns = <200000>;
+ };
+ };
+
+ cluster1_opp: opp_table1 {
+ compatible = "operating-points-v2";
+ opp-shared;
+
+ opp-307200000 {
+ opp-hz = /bits/ 64 <307200000>;
+ clock-latency-ns = <200000>;
+ };
+ opp-403200000 {
+ opp-hz = /bits/ 64 <403200000>;
+ clock-latency-ns = <200000>;
+ };
+ opp-480000000 {
+ opp-hz = /bits/ 64 <480000000>;
+ clock-latency-ns = <200000>;
+ };
+ opp-556800000 {
+ opp-hz = /bits/ 64 <556800000>;
+ clock-latency-ns = <200000>;
+ };
+ opp-652800000 {
+ opp-hz = /bits/ 64 <652800000>;
+ clock-latency-ns = <200000>;
+ };
+ opp-729600000 {
+ opp-hz = /bits/ 64 <729600000>;
+ clock-latency-ns = <200000>;
+ };
+ opp-806400000 {
+ opp-hz = /bits/ 64 <806400000>;
+ clock-latency-ns = <200000>;
+ };
+ opp-883200000 {
+ opp-hz = /bits/ 64 <883200000>;
+ clock-latency-ns = <200000>;
+ };
+ opp-940800000 {
+ opp-hz = /bits/ 64 <940800000>;
+ clock-latency-ns = <200000>;
+ };
+ opp-1036800000 {
+ opp-hz = /bits/ 64 <1036800000>;
+ clock-latency-ns = <200000>;
+ };
+ opp-1113600000 {
+ opp-hz = /bits/ 64 <1113600000>;
+ clock-latency-ns = <200000>;
+ };
+ opp-1190400000 {
+ opp-hz = /bits/ 64 <1190400000>;
+ clock-latency-ns = <200000>;
+ };
+ opp-1248000000 {
+ opp-hz = /bits/ 64 <1248000000>;
+ clock-latency-ns = <200000>;
+ };
+ opp-1324800000 {
+ opp-hz = /bits/ 64 <1324800000>;
+ clock-latency-ns = <200000>;
+ };
+ opp-1401600000 {
+ opp-hz = /bits/ 64 <1401600000>;
+ clock-latency-ns = <200000>;
+ };
+ opp-1478400000 {
+ opp-hz = /bits/ 64 <1478400000>;
+ clock-latency-ns = <200000>;
+ };
+ opp-1555200000 {
+ opp-hz = /bits/ 64 <1555200000>;
+ clock-latency-ns = <200000>;
+ };
+ opp-1632000000 {
+ opp-hz = /bits/ 64 <1632000000>;
+ clock-latency-ns = <200000>;
+ };
+ opp-1708800000 {
+ opp-hz = /bits/ 64 <1708800000>;
+ clock-latency-ns = <200000>;
+ };
+ opp-1785600000 {
+ opp-hz = /bits/ 64 <1785600000>;
+ clock-latency-ns = <200000>;
+ };
+ opp-1824000000 {
+ opp-hz = /bits/ 64 <1824000000>;
+ clock-latency-ns = <200000>;
+ };
+ opp-1920000000 {
+ opp-hz = /bits/ 64 <1920000000>;
+ clock-latency-ns = <200000>;
+ };
+ opp-1996800000 {
+ opp-hz = /bits/ 64 <1996800000>;
+ clock-latency-ns = <200000>;
+ };
+ opp-2073600000 {
+ opp-hz = /bits/ 64 <2073600000>;
+ clock-latency-ns = <200000>;
+ };
+ opp-2150400000 {
+ opp-hz = /bits/ 64 <2150400000>;
+ clock-latency-ns = <200000>;
+ };
+ };
+
thermal-zones {
cpu-thermal0 {
polling-delay-passive = <250>;
@@ -163,18 +352,34 @@
thermal-sensors = <&tsens0 3>;
trips {
- cpu_alert0: trip0 {
+ cpu_alert0: cpu_alert0 {
temperature = <75000>;
hysteresis = <2000>;
+ type = "active";
+ };
+ cpu_warn0: cpu_warn0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
type = "passive";
};
- cpu_crit0: trip1 {
+ cpu_crit0: cpu_crit0 {
temperature = <110000>;
hysteresis = <2000>;
type = "critical";
};
};
+
+ cooling-maps {
+ map0 {
+ trip = <&cpu_alert0>;
+ cooling-device = <&CPU0 THERMAL_NO_LIMIT 7>;
+ };
+ map1 {
+ trip = <&cpu_warn0>;
+ cooling-device = <&CPU0 8 THERMAL_NO_LIMIT>;
+ };
+ };
};
cpu-thermal1 {
@@ -184,18 +389,34 @@
thermal-sensors = <&tsens0 5>;
trips {
- cpu_alert1: trip0 {
+ cpu_alert1: cpu_alert1 {
temperature = <75000>;
hysteresis = <2000>;
+ type = "active";
+ };
+ cpu_warn1: cpu_warn1 {
+ temperature = <90000>;
+ hysteresis = <2000>;
type = "passive";
};
- cpu_crit1: trip1 {
+ cpu_crit1: cpu_crit1 {
temperature = <110000>;
hysteresis = <2000>;
type = "critical";
};
};
+
+ cooling-maps {
+ map0 {
+ trip = <&cpu_alert1>;
+ cooling-device = <&CPU0 THERMAL_NO_LIMIT 7>;
+ };
+ map1 {
+ trip = <&cpu_warn1>;
+ cooling-device = <&CPU0 8 THERMAL_NO_LIMIT>;
+ };
+ };
};
cpu-thermal2 {
@@ -205,18 +426,33 @@
thermal-sensors = <&tsens0 8>;
trips {
- cpu_alert2: trip0 {
+ cpu_alert2: cpu_alert2 {
temperature = <75000>;
hysteresis = <2000>;
+ type = "active";
+ };
+ cpu_warn2: cpu_warn2 {
+ temperature = <90000>;
+ hysteresis = <2000>;
type = "passive";
};
- cpu_crit2: trip1 {
+ cpu_crit2: cpu_crit2 {
temperature = <110000>;
hysteresis = <2000>;
type = "critical";
};
};
+ cooling-maps {
+ map0 {
+ trip = <&cpu_alert2>;
+ cooling-device = <&CPU2 THERMAL_NO_LIMIT 7>;
+ };
+ map1 {
+ trip = <&cpu_warn2>;
+ cooling-device = <&CPU2 8 THERMAL_NO_LIMIT>;
+ };
+ };
};
cpu-thermal3 {
@@ -226,9 +462,14 @@
thermal-sensors = <&tsens0 10>;
trips {
- cpu_alert3: trip0 {
+ cpu_alert3: cpu_alert3 {
temperature = <75000>;
hysteresis = <2000>;
+ type = "active";
+ };
+ cpu_warn3: cpu_warn3 {
+ temperature = <90000>;
+ hysteresis = <2000>;
type = "passive";
};
@@ -238,6 +479,16 @@
type = "critical";
};
};
+ cooling-maps {
+ map0 {
+ trip = <&cpu_alert3>;
+ cooling-device = <&CPU2 THERMAL_NO_LIMIT 7>;
+ };
+ map1 {
+ trip = <&cpu_warn3>;
+ cooling-device = <&CPU2 8 THERMAL_NO_LIMIT>;
+ };
+ };
};
};
@@ -414,7 +665,7 @@
};
kryocc: clock-controller@6400000 {
- compatible = "qcom,apcc-msm8996";
+ compatible = "qcom,msm8996-apcc";
reg = <0x6400000 0x90000>;
#clock-cells = <1>;
};
@@ -1001,7 +1252,7 @@
pinctrl-names = "default", "sleep";
pinctrl-0 = <&pcie2_clkreq_default &pcie2_perst_default &pcie2_wake_default>;
- pinctrl-1 = <&pcie2_clkreq_sleep &pcie2_perst_default &pcie2_wake_sleep >;
+ pinctrl-1 = <&pcie2_clkreq_sleep &pcie2_perst_default &pcie2_wake_sleep>;
vdda-supply = <&pm8994_l28>;
--
1.9.1
WARNING: multiple messages have this Message-ID (diff)
From: ilialin@codeaurora.org (Ilia Lin)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v6 08/14] dt: qcom: Add opp and thermal to the msm8996
Date: Mon, 14 May 2018 16:11:54 +0300 [thread overview]
Message-ID: <1526303520-5843-9-git-send-email-ilialin@codeaurora.org> (raw)
In-Reply-To: <1526303520-5843-1-git-send-email-ilialin@codeaurora.org>
Signed-off-by: Ilia Lin <ilialin@codeaurora.org>
---
arch/arm64/boot/dts/qcom/msm8996.dtsi | 269 ++++++++++++++++++++++++++++++++--
1 file changed, 260 insertions(+), 9 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi b/arch/arm64/boot/dts/qcom/msm8996.dtsi
index 37b7152c..e6cf290 100644
--- a/arch/arm64/boot/dts/qcom/msm8996.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi
@@ -14,6 +14,7 @@
#include <dt-bindings/clock/qcom,gcc-msm8996.h>
#include <dt-bindings/clock/qcom,mmcc-msm8996.h>
#include <dt-bindings/clock/qcom,rpmcc.h>
+#include <dt-bindings/thermal/thermal.h>
/ {
model = "Qualcomm Technologies, Inc. MSM8996";
@@ -97,6 +98,9 @@
compatible = "qcom,kryo";
reg = <0x0 0x0>;
enable-method = "psci";
+ clocks = <&kryocc 0>;
+ operating-points-v2 = <&cluster0_opp>;
+ #cooling-cells = <2>;
next-level-cache = <&L2_0>;
L2_0: l2-cache {
compatible = "cache";
@@ -109,6 +113,9 @@
compatible = "qcom,kryo";
reg = <0x0 0x1>;
enable-method = "psci";
+ clocks = <&kryocc 0>;
+ operating-points-v2 = <&cluster0_opp>;
+ #cooling-cells = <2>;
next-level-cache = <&L2_0>;
};
@@ -117,6 +124,9 @@
compatible = "qcom,kryo";
reg = <0x0 0x100>;
enable-method = "psci";
+ clocks = <&kryocc 1>;
+ operating-points-v2 = <&cluster1_opp>;
+ #cooling-cells = <2>;
next-level-cache = <&L2_1>;
L2_1: l2-cache {
compatible = "cache";
@@ -129,6 +139,9 @@
compatible = "qcom,kryo";
reg = <0x0 0x101>;
enable-method = "psci";
+ clocks = <&kryocc 1>;
+ operating-points-v2 = <&cluster1_opp>;
+ #cooling-cells = <2>;
next-level-cache = <&L2_1>;
};
@@ -155,6 +168,182 @@
};
};
+ cluster0_opp: opp_table0 {
+ compatible = "operating-points-v2";
+ opp-shared;
+
+ opp-307200000 {
+ opp-hz = /bits/ 64 <307200000>;
+ clock-latency-ns = <200000>;
+ };
+ opp-422400000 {
+ opp-hz = /bits/ 64 <422400000>;
+ clock-latency-ns = <200000>;
+ };
+ opp-480000000 {
+ opp-hz = /bits/ 64 <480000000>;
+ clock-latency-ns = <200000>;
+ };
+ opp-556800000 {
+ opp-hz = /bits/ 64 <556800000>;
+ clock-latency-ns = <200000>;
+ };
+ opp-652800000 {
+ opp-hz = /bits/ 64 <652800000>;
+ clock-latency-ns = <200000>;
+ };
+ opp-729600000 {
+ opp-hz = /bits/ 64 <729600000>;
+ clock-latency-ns = <200000>;
+ };
+ opp-844800000 {
+ opp-hz = /bits/ 64 <844800000>;
+ clock-latency-ns = <200000>;
+ };
+ opp-960000000 {
+ opp-hz = /bits/ 64 <960000000>;
+ clock-latency-ns = <200000>;
+ };
+ opp-1036800000 {
+ opp-hz = /bits/ 64 <1036800000>;
+ clock-latency-ns = <200000>;
+ };
+ opp-1113600000 {
+ opp-hz = /bits/ 64 <1113600000>;
+ clock-latency-ns = <200000>;
+ };
+ opp-1190400000 {
+ opp-hz = /bits/ 64 <1190400000>;
+ clock-latency-ns = <200000>;
+ };
+ opp-1228800000 {
+ opp-hz = /bits/ 64 <1228800000>;
+ clock-latency-ns = <200000>;
+ };
+ opp-1324800000 {
+ opp-hz = /bits/ 64 <1324800000>;
+ clock-latency-ns = <200000>;
+ };
+ opp-1401600000 {
+ opp-hz = /bits/ 64 <1401600000>;
+ clock-latency-ns = <200000>;
+ };
+ opp-1478400000 {
+ opp-hz = /bits/ 64 <1478400000>;
+ clock-latency-ns = <200000>;
+ };
+ opp-1593600000 {
+ opp-hz = /bits/ 64 <1593600000>;
+ clock-latency-ns = <200000>;
+ };
+ };
+
+ cluster1_opp: opp_table1 {
+ compatible = "operating-points-v2";
+ opp-shared;
+
+ opp-307200000 {
+ opp-hz = /bits/ 64 <307200000>;
+ clock-latency-ns = <200000>;
+ };
+ opp-403200000 {
+ opp-hz = /bits/ 64 <403200000>;
+ clock-latency-ns = <200000>;
+ };
+ opp-480000000 {
+ opp-hz = /bits/ 64 <480000000>;
+ clock-latency-ns = <200000>;
+ };
+ opp-556800000 {
+ opp-hz = /bits/ 64 <556800000>;
+ clock-latency-ns = <200000>;
+ };
+ opp-652800000 {
+ opp-hz = /bits/ 64 <652800000>;
+ clock-latency-ns = <200000>;
+ };
+ opp-729600000 {
+ opp-hz = /bits/ 64 <729600000>;
+ clock-latency-ns = <200000>;
+ };
+ opp-806400000 {
+ opp-hz = /bits/ 64 <806400000>;
+ clock-latency-ns = <200000>;
+ };
+ opp-883200000 {
+ opp-hz = /bits/ 64 <883200000>;
+ clock-latency-ns = <200000>;
+ };
+ opp-940800000 {
+ opp-hz = /bits/ 64 <940800000>;
+ clock-latency-ns = <200000>;
+ };
+ opp-1036800000 {
+ opp-hz = /bits/ 64 <1036800000>;
+ clock-latency-ns = <200000>;
+ };
+ opp-1113600000 {
+ opp-hz = /bits/ 64 <1113600000>;
+ clock-latency-ns = <200000>;
+ };
+ opp-1190400000 {
+ opp-hz = /bits/ 64 <1190400000>;
+ clock-latency-ns = <200000>;
+ };
+ opp-1248000000 {
+ opp-hz = /bits/ 64 <1248000000>;
+ clock-latency-ns = <200000>;
+ };
+ opp-1324800000 {
+ opp-hz = /bits/ 64 <1324800000>;
+ clock-latency-ns = <200000>;
+ };
+ opp-1401600000 {
+ opp-hz = /bits/ 64 <1401600000>;
+ clock-latency-ns = <200000>;
+ };
+ opp-1478400000 {
+ opp-hz = /bits/ 64 <1478400000>;
+ clock-latency-ns = <200000>;
+ };
+ opp-1555200000 {
+ opp-hz = /bits/ 64 <1555200000>;
+ clock-latency-ns = <200000>;
+ };
+ opp-1632000000 {
+ opp-hz = /bits/ 64 <1632000000>;
+ clock-latency-ns = <200000>;
+ };
+ opp-1708800000 {
+ opp-hz = /bits/ 64 <1708800000>;
+ clock-latency-ns = <200000>;
+ };
+ opp-1785600000 {
+ opp-hz = /bits/ 64 <1785600000>;
+ clock-latency-ns = <200000>;
+ };
+ opp-1824000000 {
+ opp-hz = /bits/ 64 <1824000000>;
+ clock-latency-ns = <200000>;
+ };
+ opp-1920000000 {
+ opp-hz = /bits/ 64 <1920000000>;
+ clock-latency-ns = <200000>;
+ };
+ opp-1996800000 {
+ opp-hz = /bits/ 64 <1996800000>;
+ clock-latency-ns = <200000>;
+ };
+ opp-2073600000 {
+ opp-hz = /bits/ 64 <2073600000>;
+ clock-latency-ns = <200000>;
+ };
+ opp-2150400000 {
+ opp-hz = /bits/ 64 <2150400000>;
+ clock-latency-ns = <200000>;
+ };
+ };
+
thermal-zones {
cpu-thermal0 {
polling-delay-passive = <250>;
@@ -163,18 +352,34 @@
thermal-sensors = <&tsens0 3>;
trips {
- cpu_alert0: trip0 {
+ cpu_alert0: cpu_alert0 {
temperature = <75000>;
hysteresis = <2000>;
+ type = "active";
+ };
+ cpu_warn0: cpu_warn0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
type = "passive";
};
- cpu_crit0: trip1 {
+ cpu_crit0: cpu_crit0 {
temperature = <110000>;
hysteresis = <2000>;
type = "critical";
};
};
+
+ cooling-maps {
+ map0 {
+ trip = <&cpu_alert0>;
+ cooling-device = <&CPU0 THERMAL_NO_LIMIT 7>;
+ };
+ map1 {
+ trip = <&cpu_warn0>;
+ cooling-device = <&CPU0 8 THERMAL_NO_LIMIT>;
+ };
+ };
};
cpu-thermal1 {
@@ -184,18 +389,34 @@
thermal-sensors = <&tsens0 5>;
trips {
- cpu_alert1: trip0 {
+ cpu_alert1: cpu_alert1 {
temperature = <75000>;
hysteresis = <2000>;
+ type = "active";
+ };
+ cpu_warn1: cpu_warn1 {
+ temperature = <90000>;
+ hysteresis = <2000>;
type = "passive";
};
- cpu_crit1: trip1 {
+ cpu_crit1: cpu_crit1 {
temperature = <110000>;
hysteresis = <2000>;
type = "critical";
};
};
+
+ cooling-maps {
+ map0 {
+ trip = <&cpu_alert1>;
+ cooling-device = <&CPU0 THERMAL_NO_LIMIT 7>;
+ };
+ map1 {
+ trip = <&cpu_warn1>;
+ cooling-device = <&CPU0 8 THERMAL_NO_LIMIT>;
+ };
+ };
};
cpu-thermal2 {
@@ -205,18 +426,33 @@
thermal-sensors = <&tsens0 8>;
trips {
- cpu_alert2: trip0 {
+ cpu_alert2: cpu_alert2 {
temperature = <75000>;
hysteresis = <2000>;
+ type = "active";
+ };
+ cpu_warn2: cpu_warn2 {
+ temperature = <90000>;
+ hysteresis = <2000>;
type = "passive";
};
- cpu_crit2: trip1 {
+ cpu_crit2: cpu_crit2 {
temperature = <110000>;
hysteresis = <2000>;
type = "critical";
};
};
+ cooling-maps {
+ map0 {
+ trip = <&cpu_alert2>;
+ cooling-device = <&CPU2 THERMAL_NO_LIMIT 7>;
+ };
+ map1 {
+ trip = <&cpu_warn2>;
+ cooling-device = <&CPU2 8 THERMAL_NO_LIMIT>;
+ };
+ };
};
cpu-thermal3 {
@@ -226,9 +462,14 @@
thermal-sensors = <&tsens0 10>;
trips {
- cpu_alert3: trip0 {
+ cpu_alert3: cpu_alert3 {
temperature = <75000>;
hysteresis = <2000>;
+ type = "active";
+ };
+ cpu_warn3: cpu_warn3 {
+ temperature = <90000>;
+ hysteresis = <2000>;
type = "passive";
};
@@ -238,6 +479,16 @@
type = "critical";
};
};
+ cooling-maps {
+ map0 {
+ trip = <&cpu_alert3>;
+ cooling-device = <&CPU2 THERMAL_NO_LIMIT 7>;
+ };
+ map1 {
+ trip = <&cpu_warn3>;
+ cooling-device = <&CPU2 8 THERMAL_NO_LIMIT>;
+ };
+ };
};
};
@@ -414,7 +665,7 @@
};
kryocc: clock-controller at 6400000 {
- compatible = "qcom,apcc-msm8996";
+ compatible = "qcom,msm8996-apcc";
reg = <0x6400000 0x90000>;
#clock-cells = <1>;
};
@@ -1001,7 +1252,7 @@
pinctrl-names = "default", "sleep";
pinctrl-0 = <&pcie2_clkreq_default &pcie2_perst_default &pcie2_wake_default>;
- pinctrl-1 = <&pcie2_clkreq_sleep &pcie2_perst_default &pcie2_wake_sleep >;
+ pinctrl-1 = <&pcie2_clkreq_sleep &pcie2_perst_default &pcie2_wake_sleep>;
vdda-supply = <&pm8994_l28>;
--
1.9.1
next prev parent reply other threads:[~2018-05-14 13:11 UTC|newest]
Thread overview: 41+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-05-14 13:11 [PATCH v6 00/14] CPU scaling support for msm8996 Ilia Lin
2018-05-14 13:11 ` Ilia Lin
2018-05-14 13:11 ` [PATCH v6 01/14] soc: qcom: Separate kryo l2 accessors from PMU driver Ilia Lin
2018-05-14 13:11 ` Ilia Lin
2018-05-14 13:11 ` [PATCH v6 02/14] clk: qcom: Make clk_alpha_pll_configure available to modules Ilia Lin
2018-05-14 13:11 ` Ilia Lin
2018-05-14 13:11 ` Ilia Lin
2018-05-14 13:11 ` [PATCH v6 03/14] clk: qcom: Add CPU clock driver for msm8996 Ilia Lin
2018-05-14 13:11 ` Ilia Lin
2018-05-14 13:11 ` [PATCH v6 04/14] clk: qcom: Add DT bindings for " Ilia Lin
2018-05-14 13:11 ` Ilia Lin
2018-05-14 13:11 ` [PATCH v6 05/14] clk: qcom: cpu-8996: Add support to switch to alternate PLL Ilia Lin
2018-05-14 13:11 ` Ilia Lin
2018-05-14 13:11 ` [PATCH v6 06/14] clk: qcom: cpu-8996: Add support to switch below 600Mhz Ilia Lin
2018-05-14 13:11 ` Ilia Lin
2018-05-14 13:11 ` [PATCH v6 07/14] clk: qcom: Add ACD path to CPU clock driver for msm8996 Ilia Lin
2018-05-14 13:11 ` Ilia Lin
2018-05-14 13:11 ` Ilia Lin [this message]
2018-05-14 13:11 ` [PATCH v6 08/14] dt: qcom: Add opp and thermal to the msm8996 Ilia Lin
2018-05-15 4:04 ` Viresh Kumar
2018-05-15 4:04 ` Viresh Kumar
2018-05-14 13:11 ` [PATCH v6 09/14] regulator: qcom_spmi: Add support for SAW Ilia Lin
2018-05-14 13:11 ` Ilia Lin
2018-05-14 13:11 ` [PATCH v6 10/14] dt-bindings: qcom_spmi: Add support for SAW documentation Ilia Lin
2018-05-14 13:11 ` Ilia Lin
2018-05-14 13:11 ` [PATCH v6 11/14] dt: qcom: Add SAW regulator for 8x96 CPUs Ilia Lin
2018-05-14 13:11 ` Ilia Lin
2018-05-15 4:04 ` Viresh Kumar
2018-05-15 4:04 ` Viresh Kumar
2018-05-14 13:11 ` [PATCH v6 12/14] cpufreq: Add Kryo CPU scaling driver Ilia Lin
2018-05-14 13:11 ` Ilia Lin
2018-05-15 4:09 ` Viresh Kumar
2018-05-15 4:09 ` Viresh Kumar
2018-05-14 13:11 ` [PATCH v6 13/14] dt-bindings: cpufreq: Document operating-points-v2-kryo-cpu Ilia Lin
2018-05-14 13:11 ` Ilia Lin
2018-05-15 4:09 ` Viresh Kumar
2018-05-15 4:09 ` Viresh Kumar
2018-05-14 13:12 ` [PATCH v6 14/14] dt: qcom: Add qcom-cpufreq-kryo driver configuration Ilia Lin
2018-05-14 13:12 ` Ilia Lin
2018-05-15 4:11 ` Viresh Kumar
2018-05-15 4:11 ` Viresh Kumar
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1526303520-5843-9-git-send-email-ilialin@codeaurora.org \
--to=ilialin@codeaurora.org \
--cc=amit.kucheria@linaro.org \
--cc=andy.gross@linaro.org \
--cc=broonie@kernel.org \
--cc=catalin.marinas@arm.com \
--cc=celster@codeaurora.org \
--cc=david.brown@linaro.org \
--cc=devicetree@vger.kernel.org \
--cc=lgirdwood@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pm@vger.kernel.org \
--cc=linux-soc@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=mturquette@baylibre.com \
--cc=nicolas.dechesne@linaro.org \
--cc=nm@ti.com \
--cc=rjw@rjwysocki.net \
--cc=rnayak@codeaurora.org \
--cc=robh@kernel.org \
--cc=sboyd@kernel.org \
--cc=tfinkel@codeaurora.org \
--cc=viresh.kumar@linaro.org \
--cc=will.deacon@arm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.