All of lore.kernel.org
 help / color / mirror / Atom feed
From: Stefan Mavrodiev <stefan@olimex.com>
To: Rob Herring <robh+dt@kernel.org>,
	Mark Rutland <mark.rutland@arm.com>,
	Maxime Ripard <maxime.ripard@bootlin.com>,
	Chen-Yu Tsai <wens@csie.org>,
	devicetree@vger.kernel.org (open list:OPEN FIRMWARE AND
	FLATTENED DEVICE TREE BINDINGS),
	linux-kernel@vger.kernel.org (open list),
	linux-arm-kernel@lists.infradead.org (moderated
	list:ARM/Allwinner sunXi SoC support)
Cc: linux-sunxi@googlegroups.com, Stefan Mavrodiev <stefan@olimex.com>
Subject: [PATCH 1/1] ARM:dts:sunxi: Add Olimex A20-SOM-EVB-eMMC board
Date: Wed, 16 May 2018 14:38:08 +0300	[thread overview]
Message-ID: <1526470689-6275-1-git-send-email-stefan@olimex.com> (raw)

With the new rev.E of A20-SOM-EVB, there is option for 16GB eMMC.
Currently used card is KLMAG2GEND, wired to MMC2 slot.

Signed-off-by: Stefan Mavrodiev <stefan@olimex.com>
---
 arch/arm/boot/dts/Makefile                         |  1 +
 .../arm/boot/dts/sun7i-a20-olimex-som-evb-emmc.dts | 37 ++++++++++++++++++++++
 2 files changed, 38 insertions(+)
 create mode 100644 arch/arm/boot/dts/sun7i-a20-olimex-som-evb-emmc.dts

diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 1db91ec..7f1ee65 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -959,6 +959,7 @@ dtb-$(CONFIG_MACH_SUN7I) += \
 	sun7i-a20-m3.dtb \
 	sun7i-a20-mk808c.dtb \
 	sun7i-a20-olimex-som-evb.dtb \
+	sun7i-a20-olimex-som-evb-emmc.dtb \
 	sun7i-a20-olimex-som204-evb.dtb \
 	sun7i-a20-olimex-som204-evb-emmc.dtb \
 	sun7i-a20-olinuxino-lime.dtb \
diff --git a/arch/arm/boot/dts/sun7i-a20-olimex-som-evb-emmc.dts b/arch/arm/boot/dts/sun7i-a20-olimex-som-evb-emmc.dts
new file mode 100644
index 0000000..81ebc97
--- /dev/null
+++ b/arch/arm/boot/dts/sun7i-a20-olimex-som-evb-emmc.dts
@@ -0,0 +1,37 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree Source for A20-Olimex-SOM-EVB-eMMC Board
+ *
+ * Copyright (C) 2018 Olimex Ltd.
+ *   Author: Stefan Mavrodiev <stefan@olimex.com>
+ */
+
+/dts-v1/;
+#include "sun7i-a20-olimex-som-evb.dts"
+
+/ {
+
+	model = "Olimex A20-Olimex-SOM-EVB-eMMC";
+	compatible = "olimex,a20-olimex-som-evb-emmc", "allwinner,sun7i-a20";
+
+	mmc2_pwrseq: mmc2_pwrseq {
+		compatible = "mmc-pwrseq-emmc";
+		reset-gpios = <&pio 2 18 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&mmc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc2_pins_a>;
+	vmmc-supply = <&reg_vcc3v3>;
+	mmc-pwrseq = <&mmc2_pwrseq>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+
+	emmc: emmc@0 {
+		reg = <0>;
+		compatible = "mmc-card";
+		broken-hpi;
+	};
+};
-- 
2.7.4

WARNING: multiple messages have this Message-ID (diff)
From: Stefan Mavrodiev <stefan@olimex.com>
To: Rob Herring <robh+dt@kernel.org>,
	Mark Rutland <mark.rutland@arm.com>,
	Maxime Ripard <maxime.ripard@bootlin.com>,
	Chen-Yu Tsai <wens@csie.org>,
	"open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS"
	<devicetree@vger.kernel.org>,
	open list <linux-kernel@vger.kernel.org>,
	"moderated list:ARM/Allwinner sunXi SoC support"
	<linux-arm-kernel@lists.infradead.org>
Cc: linux-sunxi@googlegroups.com, Stefan Mavrodiev <stefan@olimex.com>
Subject: [PATCH 1/1] ARM:dts:sunxi: Add Olimex A20-SOM-EVB-eMMC board
Date: Wed, 16 May 2018 14:38:08 +0300	[thread overview]
Message-ID: <1526470689-6275-1-git-send-email-stefan@olimex.com> (raw)

With the new rev.E of A20-SOM-EVB, there is option for 16GB eMMC.
Currently used card is KLMAG2GEND, wired to MMC2 slot.

Signed-off-by: Stefan Mavrodiev <stefan@olimex.com>
---
 arch/arm/boot/dts/Makefile                         |  1 +
 .../arm/boot/dts/sun7i-a20-olimex-som-evb-emmc.dts | 37 ++++++++++++++++++++++
 2 files changed, 38 insertions(+)
 create mode 100644 arch/arm/boot/dts/sun7i-a20-olimex-som-evb-emmc.dts

diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 1db91ec..7f1ee65 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -959,6 +959,7 @@ dtb-$(CONFIG_MACH_SUN7I) += \
 	sun7i-a20-m3.dtb \
 	sun7i-a20-mk808c.dtb \
 	sun7i-a20-olimex-som-evb.dtb \
+	sun7i-a20-olimex-som-evb-emmc.dtb \
 	sun7i-a20-olimex-som204-evb.dtb \
 	sun7i-a20-olimex-som204-evb-emmc.dtb \
 	sun7i-a20-olinuxino-lime.dtb \
diff --git a/arch/arm/boot/dts/sun7i-a20-olimex-som-evb-emmc.dts b/arch/arm/boot/dts/sun7i-a20-olimex-som-evb-emmc.dts
new file mode 100644
index 0000000..81ebc97
--- /dev/null
+++ b/arch/arm/boot/dts/sun7i-a20-olimex-som-evb-emmc.dts
@@ -0,0 +1,37 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree Source for A20-Olimex-SOM-EVB-eMMC Board
+ *
+ * Copyright (C) 2018 Olimex Ltd.
+ *   Author: Stefan Mavrodiev <stefan@olimex.com>
+ */
+
+/dts-v1/;
+#include "sun7i-a20-olimex-som-evb.dts"
+
+/ {
+
+	model = "Olimex A20-Olimex-SOM-EVB-eMMC";
+	compatible = "olimex,a20-olimex-som-evb-emmc", "allwinner,sun7i-a20";
+
+	mmc2_pwrseq: mmc2_pwrseq {
+		compatible = "mmc-pwrseq-emmc";
+		reset-gpios = <&pio 2 18 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&mmc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc2_pins_a>;
+	vmmc-supply = <&reg_vcc3v3>;
+	mmc-pwrseq = <&mmc2_pwrseq>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+
+	emmc: emmc@0 {
+		reg = <0>;
+		compatible = "mmc-card";
+		broken-hpi;
+	};
+};
-- 
2.7.4

WARNING: multiple messages have this Message-ID (diff)
From: stefan@olimex.com (Stefan Mavrodiev)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 1/1] ARM:dts:sunxi: Add Olimex A20-SOM-EVB-eMMC board
Date: Wed, 16 May 2018 14:38:08 +0300	[thread overview]
Message-ID: <1526470689-6275-1-git-send-email-stefan@olimex.com> (raw)

With the new rev.E of A20-SOM-EVB, there is option for 16GB eMMC.
Currently used card is KLMAG2GEND, wired to MMC2 slot.

Signed-off-by: Stefan Mavrodiev <stefan@olimex.com>
---
 arch/arm/boot/dts/Makefile                         |  1 +
 .../arm/boot/dts/sun7i-a20-olimex-som-evb-emmc.dts | 37 ++++++++++++++++++++++
 2 files changed, 38 insertions(+)
 create mode 100644 arch/arm/boot/dts/sun7i-a20-olimex-som-evb-emmc.dts

diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 1db91ec..7f1ee65 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -959,6 +959,7 @@ dtb-$(CONFIG_MACH_SUN7I) += \
 	sun7i-a20-m3.dtb \
 	sun7i-a20-mk808c.dtb \
 	sun7i-a20-olimex-som-evb.dtb \
+	sun7i-a20-olimex-som-evb-emmc.dtb \
 	sun7i-a20-olimex-som204-evb.dtb \
 	sun7i-a20-olimex-som204-evb-emmc.dtb \
 	sun7i-a20-olinuxino-lime.dtb \
diff --git a/arch/arm/boot/dts/sun7i-a20-olimex-som-evb-emmc.dts b/arch/arm/boot/dts/sun7i-a20-olimex-som-evb-emmc.dts
new file mode 100644
index 0000000..81ebc97
--- /dev/null
+++ b/arch/arm/boot/dts/sun7i-a20-olimex-som-evb-emmc.dts
@@ -0,0 +1,37 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree Source for A20-Olimex-SOM-EVB-eMMC Board
+ *
+ * Copyright (C) 2018 Olimex Ltd.
+ *   Author: Stefan Mavrodiev <stefan@olimex.com>
+ */
+
+/dts-v1/;
+#include "sun7i-a20-olimex-som-evb.dts"
+
+/ {
+
+	model = "Olimex A20-Olimex-SOM-EVB-eMMC";
+	compatible = "olimex,a20-olimex-som-evb-emmc", "allwinner,sun7i-a20";
+
+	mmc2_pwrseq: mmc2_pwrseq {
+		compatible = "mmc-pwrseq-emmc";
+		reset-gpios = <&pio 2 18 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&mmc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc2_pins_a>;
+	vmmc-supply = <&reg_vcc3v3>;
+	mmc-pwrseq = <&mmc2_pwrseq>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+
+	emmc: emmc at 0 {
+		reg = <0>;
+		compatible = "mmc-card";
+		broken-hpi;
+	};
+};
-- 
2.7.4

             reply	other threads:[~2018-05-16 11:48 UTC|newest]

Thread overview: 14+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-05-16 11:38 Stefan Mavrodiev [this message]
2018-05-16 11:38 ` [PATCH 1/1] ARM:dts:sunxi: Add Olimex A20-SOM-EVB-eMMC board Stefan Mavrodiev
2018-05-16 11:38 ` Stefan Mavrodiev
2018-05-17  7:25 ` Stefan Wahren
2018-05-17  7:25   ` Stefan Wahren
2018-05-17  7:25   ` Stefan Wahren
2018-05-17  7:34   ` Stefan Mavrodiev
2018-05-17  7:34     ` Stefan Mavrodiev
2018-05-18  8:02     ` Maxime Ripard
2018-05-18  8:02       ` Maxime Ripard
2018-05-18  8:02       ` Maxime Ripard
2018-05-18  8:03 ` Maxime Ripard
2018-05-18  8:03   ` Maxime Ripard
2018-05-18  8:03   ` Maxime Ripard

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1526470689-6275-1-git-send-email-stefan@olimex.com \
    --to=stefan@olimex.com \
    --cc=devicetree@vger.kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-sunxi@googlegroups.com \
    --cc=mark.rutland@arm.com \
    --cc=maxime.ripard@bootlin.com \
    --cc=robh+dt@kernel.org \
    --cc=wens@csie.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.