[PATCH v4 0/3] arm64: dts: Draak: Enable video inputs and VIN4

[PATCH v4 0/3] arm64: dts: Draak: Enable video inputs and VIN4

[Jacopo Mondi]

Hello,
  this series enables HDMI, CVBS and VIN4 for R8A77995 Draak board.

Compared to v3, the analog video decoder ADV7180 is now described in bindings
with the compatible string "adi,adv7180cp" and its port nodes definition
has been res-structured according to the chip bindings as reported by
Laurent on v3.

Bindings have been copi^W^Winspired from Gen2 Gose board, the only Gen2 board
using the "adv7180cp" compatible string.

Example of how to switch to HDMI input is still available here:
git://jmondi.org/linux d3/media-master/salvator-x-dts_csi2/d3-hdmi

And the series still depends on
[PATCH v3 0/9] rcar-vin: Add support for parallel input on Gen3

Thanks
   j

Jacopo Mondi (3):
  dt-bindings: media: rcar-vin: Add R8A77995 support
  arm64: dts: renesas: draak: Describe CVBS input
  arm64: dts: renesas: draak: Describe HDMI input

v3 -> v4:
- Use 'adi,adv7180cp' in [3/3] as detailed in the commit message
- Add Laurent's R-b tag to [2/3]

v2 -> v3:
- Add comment to CVBS and HDMI inputs
- Add missing Signed-off-by to [2/3]
- Add Niklas' tag

 .../devicetree/bindings/media/rcar_vin.txt         |   1 +
 arch/arm64/boot/dts/renesas/r8a77995-draak.dts     | 117 +++++++++++++++++++++
 2 files changed, 118 insertions(+)

--
2.7.4

[PATCH v4 0/3] arm64: dts: Draak: Enable video inputs and VIN4

[Jacopo Mondi]

Hello,
  this series enables HDMI, CVBS and VIN4 for R8A77995 Draak board.

Compared to v3, the analog video decoder ADV7180 is now described in bindings
with the compatible string "adi,adv7180cp" and its port nodes definition
has been res-structured according to the chip bindings as reported by
Laurent on v3.

Bindings have been copi^W^Winspired from Gen2 Gose board, the only Gen2 board
using the "adv7180cp" compatible string.

Example of how to switch to HDMI input is still available here:
git://jmondi.org/linux d3/media-master/salvator-x-dts_csi2/d3-hdmi

And the series still depends on
[PATCH v3 0/9] rcar-vin: Add support for parallel input on Gen3

Thanks
   j

Jacopo Mondi (3):
  dt-bindings: media: rcar-vin: Add R8A77995 support
  arm64: dts: renesas: draak: Describe CVBS input
  arm64: dts: renesas: draak: Describe HDMI input

v3 -> v4:
- Use 'adi,adv7180cp' in [3/3] as detailed in the commit message
- Add Laurent's R-b tag to [2/3]

v2 -> v3:
- Add comment to CVBS and HDMI inputs
- Add missing Signed-off-by to [2/3]
- Add Niklas' tag

 .../devicetree/bindings/media/rcar_vin.txt         |   1 +
 arch/arm64/boot/dts/renesas/r8a77995-draak.dts     | 117 +++++++++++++++++++++
 2 files changed, 118 insertions(+)

--
2.7.4

[PATCH v4 1/3] dt-bindings: media: rcar-vin: Add R8A77995 support

[Jacopo Mondi]

Add compatible string for R-Car D3 R8A7795 to list of SoCs supported by
rcar-vin driver.

Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Acked-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
---
 Documentation/devicetree/bindings/media/rcar_vin.txt | 1 +
 1 file changed, 1 insertion(+)

diff --git a/Documentation/devicetree/bindings/media/rcar_vin.txt b/Documentation/devicetree/bindings/media/rcar_vin.txt
index a19517e1..5c6f2a7 100644
--- a/Documentation/devicetree/bindings/media/rcar_vin.txt
+++ b/Documentation/devicetree/bindings/media/rcar_vin.txt
@@ -22,6 +22,7 @@ on Gen3 platforms to a CSI-2 receiver.
    - "renesas,vin-r8a7795" for the R8A7795 device
    - "renesas,vin-r8a7796" for the R8A7796 device
    - "renesas,vin-r8a77970" for the R8A77970 device
+   - "renesas,vin-r8a77995" for the R8A77995 device
    - "renesas,rcar-gen2-vin" for a generic R-Car Gen2 or RZ/G1 compatible
      device.
 
-- 
2.7.4

[PATCH v4 1/3] dt-bindings: media: rcar-vin: Add R8A77995 support

[Jacopo Mondi]

Add compatible string for R-Car D3 R8A7795 to list of SoCs supported by
rcar-vin driver.

Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Acked-by: Niklas S?derlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
---
 Documentation/devicetree/bindings/media/rcar_vin.txt | 1 +
 1 file changed, 1 insertion(+)

diff --git a/Documentation/devicetree/bindings/media/rcar_vin.txt b/Documentation/devicetree/bindings/media/rcar_vin.txt
index a19517e1..5c6f2a7 100644
--- a/Documentation/devicetree/bindings/media/rcar_vin.txt
+++ b/Documentation/devicetree/bindings/media/rcar_vin.txt
@@ -22,6 +22,7 @@ on Gen3 platforms to a CSI-2 receiver.
    - "renesas,vin-r8a7795" for the R8A7795 device
    - "renesas,vin-r8a7796" for the R8A7796 device
    - "renesas,vin-r8a77970" for the R8A77970 device
+   - "renesas,vin-r8a77995" for the R8A77995 device
    - "renesas,rcar-gen2-vin" for a generic R-Car Gen2 or RZ/G1 compatible
      device.
 
-- 
2.7.4

Re: [PATCH v4 1/3] dt-bindings: media: rcar-vin: Add R8A77995 support

[Rob Herring]

On Mon, May 21, 2018 at 04:45:40PM +0200, Jacopo Mondi wrote:
> Add compatible string for R-Car D3 R8A7795 to list of SoCs supported by
> rcar-vin driver.
> 
> Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
> Acked-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
> Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
> ---
>  Documentation/devicetree/bindings/media/rcar_vin.txt | 1 +
>  1 file changed, 1 insertion(+)

Acked-by: Rob Herring <robh@kernel.org>

[PATCH v4 1/3] dt-bindings: media: rcar-vin: Add R8A77995 support

[Rob Herring]

On Mon, May 21, 2018 at 04:45:40PM +0200, Jacopo Mondi wrote:
> Add compatible string for R-Car D3 R8A7795 to list of SoCs supported by
> rcar-vin driver.
> 
> Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
> Acked-by: Niklas S?derlund <niklas.soderlund+renesas@ragnatech.se>
> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
> Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
> ---
>  Documentation/devicetree/bindings/media/rcar_vin.txt | 1 +
>  1 file changed, 1 insertion(+)

Acked-by: Rob Herring <robh@kernel.org>

Re: [PATCH v4 1/3] dt-bindings: media: rcar-vin: Add R8A77995 support

[Rob Herring]

On Mon, May 21, 2018 at 04:45:40PM +0200, Jacopo Mondi wrote:
> Add compatible string for R-Car D3 R8A7795 to list of SoCs supported by
> rcar-vin driver.
> 
> Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
> Acked-by: Niklas S�derlund <niklas.soderlund+renesas@ragnatech.se>
> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
> Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
> ---
>  Documentation/devicetree/bindings/media/rcar_vin.txt | 1 +
>  1 file changed, 1 insertion(+)

Acked-by: Rob Herring <robh@kernel.org>

[PATCH v4 2/3] arm64: dts: renesas: draak: Describe CVBS input

[Jacopo Mondi]

Describe CVBS video input through analog video decoder ADV7180
connected to video input interface VIN4.

The video input signal path is shared with HDMI video input, and
selected by on-board switches SW-53 and SW-54 with CVBS input selected
by the default switches configuration.

Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>

---
v3 -> v4:
- Use 'adi,adv7180cp' compatible string in place of just 'adi,adv7180'
  as suggested by Laurent.
- Re-structure CVBS input ports definition according to adv7180cp
  bindings: add port@0 for composite input, add port@3 for parallel
  video output.
- Change node label to 'composite-in' as in Gose board bindings.

v2 -> v3:
- Add comment to describe the shared input video path.
- Add my SoB and Niklas' R-b tags.
---
 arch/arm64/boot/dts/renesas/r8a77995-draak.dts | 68 ++++++++++++++++++++++++++
 1 file changed, 68 insertions(+)

diff --git a/arch/arm64/boot/dts/renesas/r8a77995-draak.dts b/arch/arm64/boot/dts/renesas/r8a77995-draak.dts
index 9d73de8..ad59032 100644
--- a/arch/arm64/boot/dts/renesas/r8a77995-draak.dts
+++ b/arch/arm64/boot/dts/renesas/r8a77995-draak.dts
@@ -59,6 +59,16 @@
 		};
 	};
 
+	composite-in {
+		compatible = "composite-video-connector";
+
+		port {
+			composite_con_in: endpoint {
+				remote-endpoint = <&adv7180_in>;
+			};
+		};
+	};
+
 	memory@48000000 {
 		device_type = "memory";
 		/* first 128MB is reserved for secure area. */
@@ -142,6 +152,11 @@
 		groups = "usb0";
 		function = "usb0";
 	};
+
+	vin4_pins_cvbs: vin4 {
+		groups = "vin4_data8", "vin4_sync", "vin4_clk";
+		function = "vin4";
+	};
 };
 
 &i2c0 {
@@ -154,6 +169,39 @@
 		reg = <0x50>;
 		pagesize = <8>;
 	};
+
+	composite-in@20 {
+		compatible = "adi,adv7180cp";
+		reg = <0x20>;
+
+		port {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				adv7180_in: endpoint {
+					remote-endpoint = <&composite_con_in>;
+				};
+			};
+
+			port@3 {
+				reg = <3>;
+
+				/*
+				 * The VIN4 video input path is shared between
+				 * CVBS and HDMI inputs through SW[49-53]
+				 * switches.
+				 *
+				 * CVBS is the default selection, link it to
+				 * VIN4 here.
+				 */
+				adv7180_out: endpoint {
+					remote-endpoint = <&vin4_in>;
+				};
+			};
+		};
+	};
 };
 
 &i2c1 {
@@ -246,3 +294,23 @@
 	timeout-sec = <60>;
 	status = "okay";
 };
+
+&vin4 {
+	pinctrl-0 = <&vin4_pins_cvbs>;
+	pinctrl-names = "default";
+
+	status = "okay";
+
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@0 {
+			reg = <0>;
+
+			vin4_in: endpoint {
+				remote-endpoint = <&adv7180_out>;
+			};
+		};
+	};
+};
-- 
2.7.4

[PATCH v4 2/3] arm64: dts: renesas: draak: Describe CVBS input

[Jacopo Mondi]

Describe CVBS video input through analog video decoder ADV7180
connected to video input interface VIN4.

The video input signal path is shared with HDMI video input, and
selected by on-board switches SW-53 and SW-54 with CVBS input selected
by the default switches configuration.

Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Reviewed-by: Niklas S?derlund <niklas.soderlund+renesas@ragnatech.se>

---
v3 -> v4:
- Use 'adi,adv7180cp' compatible string in place of just 'adi,adv7180'
  as suggested by Laurent.
- Re-structure CVBS input ports definition according to adv7180cp
  bindings: add port at 0 for composite input, add port at 3 for parallel
  video output.
- Change node label to 'composite-in' as in Gose board bindings.

v2 -> v3:
- Add comment to describe the shared input video path.
- Add my SoB and Niklas' R-b tags.
---
 arch/arm64/boot/dts/renesas/r8a77995-draak.dts | 68 ++++++++++++++++++++++++++
 1 file changed, 68 insertions(+)

diff --git a/arch/arm64/boot/dts/renesas/r8a77995-draak.dts b/arch/arm64/boot/dts/renesas/r8a77995-draak.dts
index 9d73de8..ad59032 100644
--- a/arch/arm64/boot/dts/renesas/r8a77995-draak.dts
+++ b/arch/arm64/boot/dts/renesas/r8a77995-draak.dts
@@ -59,6 +59,16 @@
 		};
 	};
 
+	composite-in {
+		compatible = "composite-video-connector";
+
+		port {
+			composite_con_in: endpoint {
+				remote-endpoint = <&adv7180_in>;
+			};
+		};
+	};
+
 	memory at 48000000 {
 		device_type = "memory";
 		/* first 128MB is reserved for secure area. */
@@ -142,6 +152,11 @@
 		groups = "usb0";
 		function = "usb0";
 	};
+
+	vin4_pins_cvbs: vin4 {
+		groups = "vin4_data8", "vin4_sync", "vin4_clk";
+		function = "vin4";
+	};
 };
 
 &i2c0 {
@@ -154,6 +169,39 @@
 		reg = <0x50>;
 		pagesize = <8>;
 	};
+
+	composite-in at 20 {
+		compatible = "adi,adv7180cp";
+		reg = <0x20>;
+
+		port {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port at 0 {
+				reg = <0>;
+				adv7180_in: endpoint {
+					remote-endpoint = <&composite_con_in>;
+				};
+			};
+
+			port at 3 {
+				reg = <3>;
+
+				/*
+				 * The VIN4 video input path is shared between
+				 * CVBS and HDMI inputs through SW[49-53]
+				 * switches.
+				 *
+				 * CVBS is the default selection, link it to
+				 * VIN4 here.
+				 */
+				adv7180_out: endpoint {
+					remote-endpoint = <&vin4_in>;
+				};
+			};
+		};
+	};
 };
 
 &i2c1 {
@@ -246,3 +294,23 @@
 	timeout-sec = <60>;
 	status = "okay";
 };
+
+&vin4 {
+	pinctrl-0 = <&vin4_pins_cvbs>;
+	pinctrl-names = "default";
+
+	status = "okay";
+
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port at 0 {
+			reg = <0>;
+
+			vin4_in: endpoint {
+				remote-endpoint = <&adv7180_out>;
+			};
+		};
+	};
+};
-- 
2.7.4

Re: [PATCH v4 2/3] arm64: dts: renesas: draak: Describe CVBS input

[Laurent Pinchart]

Hi Jacopo,

Thank you for the patch.

On Monday, 21 May 2018 17:45:41 EEST Jacopo Mondi wrote:
> Describe CVBS video input through analog video decoder ADV7180
> connected to video input interface VIN4.
> 
> The video input signal path is shared with HDMI video input, and
> selected by on-board switches SW-53 and SW-54 with CVBS input selected
> by the default switches configuration.
> 
> Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>

Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>

> ---
> v3 -> v4:
> - Use 'adi,adv7180cp' compatible string in place of just 'adi,adv7180'
>   as suggested by Laurent.
> - Re-structure CVBS input ports definition according to adv7180cp
>   bindings: add port@0 for composite input, add port@3 for parallel
>   video output.
> - Change node label to 'composite-in' as in Gose board bindings.
> 
> v2 -> v3:
> - Add comment to describe the shared input video path.
> - Add my SoB and Niklas' R-b tags.
> ---
>  arch/arm64/boot/dts/renesas/r8a77995-draak.dts | 68
> ++++++++++++++++++++++++++ 1 file changed, 68 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/renesas/r8a77995-draak.dts
> b/arch/arm64/boot/dts/renesas/r8a77995-draak.dts index 9d73de8..ad59032
> 100644
> --- a/arch/arm64/boot/dts/renesas/r8a77995-draak.dts
> +++ b/arch/arm64/boot/dts/renesas/r8a77995-draak.dts
> @@ -59,6 +59,16 @@
>  		};
>  	};
> 
> +	composite-in {
> +		compatible = "composite-video-connector";
> +
> +		port {
> +			composite_con_in: endpoint {
> +				remote-endpoint = <&adv7180_in>;
> +			};
> +		};
> +	};
> +
>  	memory@48000000 {
>  		device_type = "memory";
>  		/* first 128MB is reserved for secure area. */
> @@ -142,6 +152,11 @@
>  		groups = "usb0";
>  		function = "usb0";
>  	};
> +
> +	vin4_pins_cvbs: vin4 {
> +		groups = "vin4_data8", "vin4_sync", "vin4_clk";
> +		function = "vin4";
> +	};
>  };
> 
>  &i2c0 {
> @@ -154,6 +169,39 @@
>  		reg = <0x50>;
>  		pagesize = <8>;
>  	};
> +
> +	composite-in@20 {
> +		compatible = "adi,adv7180cp";
> +		reg = <0x20>;
> +
> +		port {
> +			#address-cells = <1>;
> +			#size-cells = <0>;
> +
> +			port@0 {
> +				reg = <0>;
> +				adv7180_in: endpoint {
> +					remote-endpoint = <&composite_con_in>;
> +				};
> +			};
> +
> +			port@3 {
> +				reg = <3>;
> +
> +				/*
> +				 * The VIN4 video input path is shared between
> +				 * CVBS and HDMI inputs through SW[49-53]
> +				 * switches.
> +				 *
> +				 * CVBS is the default selection, link it to
> +				 * VIN4 here.
> +				 */
> +				adv7180_out: endpoint {
> +					remote-endpoint = <&vin4_in>;
> +				};
> +			};
> +		};
> +	};
>  };
> 
>  &i2c1 {
> @@ -246,3 +294,23 @@
>  	timeout-sec = <60>;
>  	status = "okay";
>  };
> +
> +&vin4 {
> +	pinctrl-0 = <&vin4_pins_cvbs>;
> +	pinctrl-names = "default";
> +
> +	status = "okay";
> +
> +	ports {
> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +
> +		port@0 {
> +			reg = <0>;
> +
> +			vin4_in: endpoint {
> +				remote-endpoint = <&adv7180_out>;
> +			};
> +		};
> +	};
> +};


-- 
Regards,

Laurent Pinchart

[PATCH v4 2/3] arm64: dts: renesas: draak: Describe CVBS input

[Laurent Pinchart]

Hi Jacopo,

Thank you for the patch.

On Monday, 21 May 2018 17:45:41 EEST Jacopo Mondi wrote:
> Describe CVBS video input through analog video decoder ADV7180
> connected to video input interface VIN4.
> 
> The video input signal path is shared with HDMI video input, and
> selected by on-board switches SW-53 and SW-54 with CVBS input selected
> by the default switches configuration.
> 
> Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
> Reviewed-by: Niklas S?derlund <niklas.soderlund+renesas@ragnatech.se>

Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>

> ---
> v3 -> v4:
> - Use 'adi,adv7180cp' compatible string in place of just 'adi,adv7180'
>   as suggested by Laurent.
> - Re-structure CVBS input ports definition according to adv7180cp
>   bindings: add port at 0 for composite input, add port at 3 for parallel
>   video output.
> - Change node label to 'composite-in' as in Gose board bindings.
> 
> v2 -> v3:
> - Add comment to describe the shared input video path.
> - Add my SoB and Niklas' R-b tags.
> ---
>  arch/arm64/boot/dts/renesas/r8a77995-draak.dts | 68
> ++++++++++++++++++++++++++ 1 file changed, 68 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/renesas/r8a77995-draak.dts
> b/arch/arm64/boot/dts/renesas/r8a77995-draak.dts index 9d73de8..ad59032
> 100644
> --- a/arch/arm64/boot/dts/renesas/r8a77995-draak.dts
> +++ b/arch/arm64/boot/dts/renesas/r8a77995-draak.dts
> @@ -59,6 +59,16 @@
>  		};
>  	};
> 
> +	composite-in {
> +		compatible = "composite-video-connector";
> +
> +		port {
> +			composite_con_in: endpoint {
> +				remote-endpoint = <&adv7180_in>;
> +			};
> +		};
> +	};
> +
>  	memory at 48000000 {
>  		device_type = "memory";
>  		/* first 128MB is reserved for secure area. */
> @@ -142,6 +152,11 @@
>  		groups = "usb0";
>  		function = "usb0";
>  	};
> +
> +	vin4_pins_cvbs: vin4 {
> +		groups = "vin4_data8", "vin4_sync", "vin4_clk";
> +		function = "vin4";
> +	};
>  };
> 
>  &i2c0 {
> @@ -154,6 +169,39 @@
>  		reg = <0x50>;
>  		pagesize = <8>;
>  	};
> +
> +	composite-in at 20 {
> +		compatible = "adi,adv7180cp";
> +		reg = <0x20>;
> +
> +		port {
> +			#address-cells = <1>;
> +			#size-cells = <0>;
> +
> +			port at 0 {
> +				reg = <0>;
> +				adv7180_in: endpoint {
> +					remote-endpoint = <&composite_con_in>;
> +				};
> +			};
> +
> +			port at 3 {
> +				reg = <3>;
> +
> +				/*
> +				 * The VIN4 video input path is shared between
> +				 * CVBS and HDMI inputs through SW[49-53]
> +				 * switches.
> +				 *
> +				 * CVBS is the default selection, link it to
> +				 * VIN4 here.
> +				 */
> +				adv7180_out: endpoint {
> +					remote-endpoint = <&vin4_in>;
> +				};
> +			};
> +		};
> +	};
>  };
> 
>  &i2c1 {
> @@ -246,3 +294,23 @@
>  	timeout-sec = <60>;
>  	status = "okay";
>  };
> +
> +&vin4 {
> +	pinctrl-0 = <&vin4_pins_cvbs>;
> +	pinctrl-names = "default";
> +
> +	status = "okay";
> +
> +	ports {
> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +
> +		port at 0 {
> +			reg = <0>;
> +
> +			vin4_in: endpoint {
> +				remote-endpoint = <&adv7180_out>;
> +			};
> +		};
> +	};
> +};


-- 
Regards,

Laurent Pinchart

Re: [PATCH v4 2/3] arm64: dts: renesas: draak: Describe CVBS input

[Simon Horman]

On Mon, May 21, 2018 at 05:50:50PM +0300, Laurent Pinchart wrote:
> Hi Jacopo,
> 
> Thank you for the patch.
> 
> On Monday, 21 May 2018 17:45:41 EEST Jacopo Mondi wrote:
> > Describe CVBS video input through analog video decoder ADV7180
> > connected to video input interface VIN4.
> > 
> > The video input signal path is shared with HDMI video input, and
> > selected by on-board switches SW-53 and SW-54 with CVBS input selected
> > by the default switches configuration.
> > 
> > Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
> > Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
> 
> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>

Thanks Niklas, applied.

[PATCH v4 2/3] arm64: dts: renesas: draak: Describe CVBS input

[Simon Horman]

On Mon, May 21, 2018 at 05:50:50PM +0300, Laurent Pinchart wrote:
> Hi Jacopo,
> 
> Thank you for the patch.
> 
> On Monday, 21 May 2018 17:45:41 EEST Jacopo Mondi wrote:
> > Describe CVBS video input through analog video decoder ADV7180
> > connected to video input interface VIN4.
> > 
> > The video input signal path is shared with HDMI video input, and
> > selected by on-board switches SW-53 and SW-54 with CVBS input selected
> > by the default switches configuration.
> > 
> > Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
> > Reviewed-by: Niklas S?derlund <niklas.soderlund+renesas@ragnatech.se>
> 
> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>

Thanks Niklas, applied.

Re: [PATCH v4 2/3] arm64: dts: renesas: draak: Describe CVBS input

[Simon Horman]

On Tue, May 22, 2018 at 03:24:13PM +0200, Simon Horman wrote:
> On Mon, May 21, 2018 at 05:50:50PM +0300, Laurent Pinchart wrote:
> > Hi Jacopo,
> > 
> > Thank you for the patch.
> > 
> > On Monday, 21 May 2018 17:45:41 EEST Jacopo Mondi wrote:
> > > Describe CVBS video input through analog video decoder ADV7180
> > > connected to video input interface VIN4.
> > > 
> > > The video input signal path is shared with HDMI video input, and
> > > selected by on-board switches SW-53 and SW-54 with CVBS input selected
> > > by the default switches configuration.
> > > 
> > > Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
> > > Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
> > 
> > Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
> 
> Thanks Niklas, applied.

Sorry, I meant thanks Jacopo, Niklas and Laurent!

[PATCH v4 2/3] arm64: dts: renesas: draak: Describe CVBS input

[Simon Horman]

On Tue, May 22, 2018 at 03:24:13PM +0200, Simon Horman wrote:
> On Mon, May 21, 2018 at 05:50:50PM +0300, Laurent Pinchart wrote:
> > Hi Jacopo,
> > 
> > Thank you for the patch.
> > 
> > On Monday, 21 May 2018 17:45:41 EEST Jacopo Mondi wrote:
> > > Describe CVBS video input through analog video decoder ADV7180
> > > connected to video input interface VIN4.
> > > 
> > > The video input signal path is shared with HDMI video input, and
> > > selected by on-board switches SW-53 and SW-54 with CVBS input selected
> > > by the default switches configuration.
> > > 
> > > Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
> > > Reviewed-by: Niklas S?derlund <niklas.soderlund+renesas@ragnatech.se>
> > 
> > Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
> 
> Thanks Niklas, applied.

Sorry, I meant thanks Jacopo, Niklas and Laurent!

[PATCH v4 3/3] arm64: dts: renesas: draak: Describe HDMI input

[Jacopo Mondi]

Describe HDMI input connector and ADV7612 HDMI decoder installed on
R-Car Gen3 Draak board.

The video signal routing to the HDMI decoder to the video input interface
VIN4 is multiplexed with CVBS input path, and enabled/disabled through
on-board switches SW-49, SW-50, SW-51 and SW-52.

As the default board switches configuration connects CVBS input to VIN4,
leave the HDMI decoder unconnected in DTS.

Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>

---
v3 -> v4:
- Add Laurent's R-b tag.
v2 -> v3:
- Add comment on HDMI output port about the shared CVBS/HDMI video path.
- Add Niklas' R-b tag.
---
 arch/arm64/boot/dts/renesas/r8a77995-draak.dts | 49 ++++++++++++++++++++++++++
 1 file changed, 49 insertions(+)

diff --git a/arch/arm64/boot/dts/renesas/r8a77995-draak.dts b/arch/arm64/boot/dts/renesas/r8a77995-draak.dts
index ad59032..1a474f94 100644
--- a/arch/arm64/boot/dts/renesas/r8a77995-draak.dts
+++ b/arch/arm64/boot/dts/renesas/r8a77995-draak.dts
@@ -69,6 +69,17 @@
 		};
 	};
 
+	hdmi-in {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&adv7612_in>;
+			};
+		};
+	};
+
 	memory@48000000 {
 		device_type = "memory";
 		/* first 128MB is reserved for secure area. */
@@ -201,6 +212,44 @@
 				};
 			};
 		};
+
+	};
+
+	hdmi-decoder@4c {
+		compatible = "adi,adv7612";
+		reg = <0x4c>;
+		default-input = <0>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				adv7612_in: endpoint {
+					remote-endpoint = <&hdmi_con_in>;
+				};
+			};
+
+			port@2 {
+				reg = <2>;
+
+				/*
+				 * The VIN4 video input path is shared between
+				 * CVBS and HDMI inputs through SW[49-53]
+				 * switches.
+				 *
+				 * CVBS is the default selection, leave HDMI
+				 * not connected here.
+				 */
+				adv7612_out: endpoint {
+					pclk-sample = <0>;
+					hsync-active = <0>;
+					vsync-active = <0>;
+				};
+			};
+		};
 	};
 };
 
-- 
2.7.4

[PATCH v4 3/3] arm64: dts: renesas: draak: Describe HDMI input

[Jacopo Mondi]

Describe HDMI input connector and ADV7612 HDMI decoder installed on
R-Car Gen3 Draak board.

The video signal routing to the HDMI decoder to the video input interface
VIN4 is multiplexed with CVBS input path, and enabled/disabled through
on-board switches SW-49, SW-50, SW-51 and SW-52.

As the default board switches configuration connects CVBS input to VIN4,
leave the HDMI decoder unconnected in DTS.

Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Reviewed-by: Niklas S?derlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>

---
v3 -> v4:
- Add Laurent's R-b tag.
v2 -> v3:
- Add comment on HDMI output port about the shared CVBS/HDMI video path.
- Add Niklas' R-b tag.
---
 arch/arm64/boot/dts/renesas/r8a77995-draak.dts | 49 ++++++++++++++++++++++++++
 1 file changed, 49 insertions(+)

diff --git a/arch/arm64/boot/dts/renesas/r8a77995-draak.dts b/arch/arm64/boot/dts/renesas/r8a77995-draak.dts
index ad59032..1a474f94 100644
--- a/arch/arm64/boot/dts/renesas/r8a77995-draak.dts
+++ b/arch/arm64/boot/dts/renesas/r8a77995-draak.dts
@@ -69,6 +69,17 @@
 		};
 	};
 
+	hdmi-in {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&adv7612_in>;
+			};
+		};
+	};
+
 	memory at 48000000 {
 		device_type = "memory";
 		/* first 128MB is reserved for secure area. */
@@ -201,6 +212,44 @@
 				};
 			};
 		};
+
+	};
+
+	hdmi-decoder at 4c {
+		compatible = "adi,adv7612";
+		reg = <0x4c>;
+		default-input = <0>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port at 0 {
+				reg = <0>;
+
+				adv7612_in: endpoint {
+					remote-endpoint = <&hdmi_con_in>;
+				};
+			};
+
+			port at 2 {
+				reg = <2>;
+
+				/*
+				 * The VIN4 video input path is shared between
+				 * CVBS and HDMI inputs through SW[49-53]
+				 * switches.
+				 *
+				 * CVBS is the default selection, leave HDMI
+				 * not connected here.
+				 */
+				adv7612_out: endpoint {
+					pclk-sample = <0>;
+					hsync-active = <0>;
+					vsync-active = <0>;
+				};
+			};
+		};
 	};
 };
 
-- 
2.7.4

Re: [PATCH v4 3/3] arm64: dts: renesas: draak: Describe HDMI input

[Simon Horman]

On Mon, May 21, 2018 at 04:45:42PM +0200, Jacopo Mondi wrote:
> Describe HDMI input connector and ADV7612 HDMI decoder installed on
> R-Car Gen3 Draak board.
> 
> The video signal routing to the HDMI decoder to the video input interface
> VIN4 is multiplexed with CVBS input path, and enabled/disabled through
> on-board switches SW-49, SW-50, SW-51 and SW-52.
> 
> As the default board switches configuration connects CVBS input to VIN4,
> leave the HDMI decoder unconnected in DTS.
> 
> Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>

Thanks Jacopo,

applied.

[PATCH v4 3/3] arm64: dts: renesas: draak: Describe HDMI input

[Simon Horman]

On Mon, May 21, 2018 at 04:45:42PM +0200, Jacopo Mondi wrote:
> Describe HDMI input connector and ADV7612 HDMI decoder installed on
> R-Car Gen3 Draak board.
> 
> The video signal routing to the HDMI decoder to the video input interface
> VIN4 is multiplexed with CVBS input path, and enabled/disabled through
> on-board switches SW-49, SW-50, SW-51 and SW-52.
> 
> As the default board switches configuration connects CVBS input to VIN4,
> leave the HDMI decoder unconnected in DTS.
> 
> Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
> Reviewed-by: Niklas S?derlund <niklas.soderlund+renesas@ragnatech.se>
> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>

Thanks Jacopo,

applied.