[PATCH 0/3] Update Broadcom Stingray clock entries

[PATCH 0/3] Update Broadcom Stingray clock entries

[Ray Jui]

This patch series updates Broadcom Stingray clock entries so they match the
latest ASIC datasheet

This patch series is based off v4.17-rc5 and is available on GIHUB:
repo: https://github.com/Broadcom/arm64-linux.git
branch: sr-clk-v1

Ray Jui (3):
  dt-bindings: clk: Update Stingray binding doc
  clk: bcm: Update and add tingray clock entries
  arm64: dts: Update Stingray clock DT nodes

 .../bindings/clock/brcm,iproc-clocks.txt           |  26 ++--
 .../boot/dts/broadcom/stingray/stingray-clock.dtsi |  26 ++--
 drivers/clk/bcm/clk-sr.c                           | 135 ++++++++++++++++++---
 include/dt-bindings/clock/bcm-sr.h                 |  24 ++--
 4 files changed, 170 insertions(+), 41 deletions(-)

-- 
2.1.4

[PATCH 0/3] Update Broadcom Stingray clock entries

[Ray Jui]

This patch series updates Broadcom Stingray clock entries so they match the
latest ASIC datasheet

This patch series is based off v4.17-rc5 and is available on GIHUB:
repo: https://github.com/Broadcom/arm64-linux.git
branch: sr-clk-v1

Ray Jui (3):
  dt-bindings: clk: Update Stingray binding doc
  clk: bcm: Update and add tingray clock entries
  arm64: dts: Update Stingray clock DT nodes

 .../bindings/clock/brcm,iproc-clocks.txt           |  26 ++--
 .../boot/dts/broadcom/stingray/stingray-clock.dtsi |  26 ++--
 drivers/clk/bcm/clk-sr.c                           | 135 ++++++++++++++++++---
 include/dt-bindings/clock/bcm-sr.h                 |  24 ++--
 4 files changed, 170 insertions(+), 41 deletions(-)

-- 
2.1.4

[PATCH 1/3] dt-bindings: clk: Update Stingray binding doc

[Ray Jui]

Update Stingray clock binding document to add additional clock entries
with names matching the latest ASIC datasheet. Also modify a few existing
entries to make their naming more consistent with the rest of the entries

Signed-off-by: Pramod Kumar <pramod.kumar@broadcom.com>
Signed-off-by: Ray Jui <ray.jui@broadcom.com>
---
 .../bindings/clock/brcm,iproc-clocks.txt           | 26 ++++++++++++----------
 1 file changed, 14 insertions(+), 12 deletions(-)

diff --git a/Documentation/devicetree/bindings/clock/brcm,iproc-clocks.txt b/Documentation/devicetree/bindings/clock/brcm,iproc-clocks.txt
index f8e4a93..ab730ea 100644
--- a/Documentation/devicetree/bindings/clock/brcm,iproc-clocks.txt
+++ b/Documentation/devicetree/bindings/clock/brcm,iproc-clocks.txt
@@ -276,36 +276,38 @@ These clock IDs are defined in:
     clk_ts_500_ref	genpll2		2	BCM_SR_GENPLL2_TS_500_REF_CLK
     clk_125_nitro	genpll2		3	BCM_SR_GENPLL2_125_NITRO_CLK
     clk_chimp		genpll2		4	BCM_SR_GENPLL2_CHIMP_CLK
-    clk_nic_flash	genpll2		5	BCM_SR_GENPLL2_NIC_FLASH
+    clk_nic_flash	genpll2		5	BCM_SR_GENPLL2_NIC_FLASH_CLK
+    clk_fs		genpll2		6	BCM_SR_GENPLL2_FS_CLK
 
     genpll3		crystal		0	BCM_SR_GENPLL3
     clk_hsls		genpll3		1	BCM_SR_GENPLL3_HSLS_CLK
     clk_sdio		genpll3		2	BCM_SR_GENPLL3_SDIO_CLK
 
     genpll4		crystal		0	BCM_SR_GENPLL4
-    ccn			genpll4		1	BCM_SR_GENPLL4_CCN_CLK
+    clk_ccn		genpll4		1	BCM_SR_GENPLL4_CCN_CLK
     clk_tpiu_pll	genpll4		2	BCM_SR_GENPLL4_TPIU_PLL_CLK
-    noc_clk		genpll4		3	BCM_SR_GENPLL4_NOC_CLK
+    clk_noc		genpll4		3	BCM_SR_GENPLL4_NOC_CLK
     clk_chclk_fs4	genpll4		4	BCM_SR_GENPLL4_CHCLK_FS4_CLK
     clk_bridge_fscpu	genpll4		5	BCM_SR_GENPLL4_BRIDGE_FSCPU_CLK
 
-
     genpll5		crystal		0	BCM_SR_GENPLL5
-    fs4_hf_clk		genpll5		1	BCM_SR_GENPLL5_FS4_HF_CLK
-    crypto_ae_clk	genpll5		2	BCM_SR_GENPLL5_CRYPTO_AE_CLK
-    raid_ae_clk		genpll5		3	BCM_SR_GENPLL5_RAID_AE_CLK
+    clk_fs4_hf		genpll5		1	BCM_SR_GENPLL5_FS4_HF_CLK
+    clk_crypto_ae	genpll5		2	BCM_SR_GENPLL5_CRYPTO_AE_CLK
+    clk_raid_ae		genpll5		3	BCM_SR_GENPLL5_RAID_AE_CLK
 
     genpll6		crystal		0	BCM_SR_GENPLL6
-    48_usb		genpll6		1	BCM_SR_GENPLL6_48_USB_CLK
+    clk_48_usb		genpll6		1	BCM_SR_GENPLL6_48_USB_CLK
 
     lcpll0		crystal		0	BCM_SR_LCPLL0
     clk_sata_refp 	lcpll0		1	BCM_SR_LCPLL0_SATA_REFP_CLK
     clk_sata_refn	lcpll0		2	BCM_SR_LCPLL0_SATA_REFN_CLK
-    clk_usb_ref		lcpll0		3	BCM_SR_LCPLL0_USB_REF_CLK
-    sata_refpn		lcpll0		3	BCM_SR_LCPLL0_SATA_REFPN_CLK
+    clk_sata_350	lcpll0		3	BCM_SR_LCPLL0_SATA_350_CLK
+    clk_sata_500	lcpll0		4	BCM_SR_LCPLL0_SATA_500_CLK
 
     lcpll1		crystal		0	BCM_SR_LCPLL1
-    wan 		lcpll1		1	BCM_SR_LCPLL0_WAN_CLK
+    clk_wan		lcpll1		1	BCM_SR_LCPLL1_WAN_CLK
+    clk_usb_ref		lcpll1		2	BCM_SR_LCPLL1_USB_REF_CLK
+    clk_crmu_ts		lcpll1		3	BCM_SR_LCPLL1_CRMU_TS_CLK
 
     lcpll_pcie		crystal		0	BCM_SR_LCPLL_PCIE
-    pcie_phy_ref 	lcpll1		1	BCM_SR_LCPLL_PCIE_PHY_REF_CLK
+    clk_pcie_phy_ref	lcpll1		1	BCM_SR_LCPLL_PCIE_PHY_REF_CLK
-- 
2.1.4

[PATCH 1/3] dt-bindings: clk: Update Stingray binding doc

[Ray Jui]

Update Stingray clock binding document to add additional clock entries
with names matching the latest ASIC datasheet. Also modify a few existing
entries to make their naming more consistent with the rest of the entries

Signed-off-by: Pramod Kumar <pramod.kumar@broadcom.com>
Signed-off-by: Ray Jui <ray.jui@broadcom.com>
---
 .../bindings/clock/brcm,iproc-clocks.txt           | 26 ++++++++++++----------
 1 file changed, 14 insertions(+), 12 deletions(-)

diff --git a/Documentation/devicetree/bindings/clock/brcm,iproc-clocks.txt b/Documentation/devicetree/bindings/clock/brcm,iproc-clocks.txt
index f8e4a93..ab730ea 100644
--- a/Documentation/devicetree/bindings/clock/brcm,iproc-clocks.txt
+++ b/Documentation/devicetree/bindings/clock/brcm,iproc-clocks.txt
@@ -276,36 +276,38 @@ These clock IDs are defined in:
     clk_ts_500_ref	genpll2		2	BCM_SR_GENPLL2_TS_500_REF_CLK
     clk_125_nitro	genpll2		3	BCM_SR_GENPLL2_125_NITRO_CLK
     clk_chimp		genpll2		4	BCM_SR_GENPLL2_CHIMP_CLK
-    clk_nic_flash	genpll2		5	BCM_SR_GENPLL2_NIC_FLASH
+    clk_nic_flash	genpll2		5	BCM_SR_GENPLL2_NIC_FLASH_CLK
+    clk_fs		genpll2		6	BCM_SR_GENPLL2_FS_CLK
 
     genpll3		crystal		0	BCM_SR_GENPLL3
     clk_hsls		genpll3		1	BCM_SR_GENPLL3_HSLS_CLK
     clk_sdio		genpll3		2	BCM_SR_GENPLL3_SDIO_CLK
 
     genpll4		crystal		0	BCM_SR_GENPLL4
-    ccn			genpll4		1	BCM_SR_GENPLL4_CCN_CLK
+    clk_ccn		genpll4		1	BCM_SR_GENPLL4_CCN_CLK
     clk_tpiu_pll	genpll4		2	BCM_SR_GENPLL4_TPIU_PLL_CLK
-    noc_clk		genpll4		3	BCM_SR_GENPLL4_NOC_CLK
+    clk_noc		genpll4		3	BCM_SR_GENPLL4_NOC_CLK
     clk_chclk_fs4	genpll4		4	BCM_SR_GENPLL4_CHCLK_FS4_CLK
     clk_bridge_fscpu	genpll4		5	BCM_SR_GENPLL4_BRIDGE_FSCPU_CLK
 
-
     genpll5		crystal		0	BCM_SR_GENPLL5
-    fs4_hf_clk		genpll5		1	BCM_SR_GENPLL5_FS4_HF_CLK
-    crypto_ae_clk	genpll5		2	BCM_SR_GENPLL5_CRYPTO_AE_CLK
-    raid_ae_clk		genpll5		3	BCM_SR_GENPLL5_RAID_AE_CLK
+    clk_fs4_hf		genpll5		1	BCM_SR_GENPLL5_FS4_HF_CLK
+    clk_crypto_ae	genpll5		2	BCM_SR_GENPLL5_CRYPTO_AE_CLK
+    clk_raid_ae		genpll5		3	BCM_SR_GENPLL5_RAID_AE_CLK
 
     genpll6		crystal		0	BCM_SR_GENPLL6
-    48_usb		genpll6		1	BCM_SR_GENPLL6_48_USB_CLK
+    clk_48_usb		genpll6		1	BCM_SR_GENPLL6_48_USB_CLK
 
     lcpll0		crystal		0	BCM_SR_LCPLL0
     clk_sata_refp 	lcpll0		1	BCM_SR_LCPLL0_SATA_REFP_CLK
     clk_sata_refn	lcpll0		2	BCM_SR_LCPLL0_SATA_REFN_CLK
-    clk_usb_ref		lcpll0		3	BCM_SR_LCPLL0_USB_REF_CLK
-    sata_refpn		lcpll0		3	BCM_SR_LCPLL0_SATA_REFPN_CLK
+    clk_sata_350	lcpll0		3	BCM_SR_LCPLL0_SATA_350_CLK
+    clk_sata_500	lcpll0		4	BCM_SR_LCPLL0_SATA_500_CLK
 
     lcpll1		crystal		0	BCM_SR_LCPLL1
-    wan 		lcpll1		1	BCM_SR_LCPLL0_WAN_CLK
+    clk_wan		lcpll1		1	BCM_SR_LCPLL1_WAN_CLK
+    clk_usb_ref		lcpll1		2	BCM_SR_LCPLL1_USB_REF_CLK
+    clk_crmu_ts		lcpll1		3	BCM_SR_LCPLL1_CRMU_TS_CLK
 
     lcpll_pcie		crystal		0	BCM_SR_LCPLL_PCIE
-    pcie_phy_ref 	lcpll1		1	BCM_SR_LCPLL_PCIE_PHY_REF_CLK
+    clk_pcie_phy_ref	lcpll1		1	BCM_SR_LCPLL_PCIE_PHY_REF_CLK
-- 
2.1.4

[PATCH 2/3] clk: bcm: Update and add tingray clock entries

[Ray Jui]

Update and add Stingray clock definitions and tables so they match the
binding document and the latest ASIC datasheet

Signed-off-by: Pramod Kumar <pramod.kumar@broadcom.com>
Signed-off-by: Ray Jui <ray.jui@broadcom.com>
---
 drivers/clk/bcm/clk-sr.c           | 135 ++++++++++++++++++++++++++++++++-----
 include/dt-bindings/clock/bcm-sr.h |  24 +++++--
 2 files changed, 137 insertions(+), 22 deletions(-)

diff --git a/drivers/clk/bcm/clk-sr.c b/drivers/clk/bcm/clk-sr.c
index adc74f4..7b9efc0 100644
--- a/drivers/clk/bcm/clk-sr.c
+++ b/drivers/clk/bcm/clk-sr.c
@@ -56,8 +56,8 @@ static const struct iproc_pll_ctrl sr_genpll0 = {
 };
 
 static const struct iproc_clk_ctrl sr_genpll0_clk[] = {
-	[BCM_SR_GENPLL0_SATA_CLK] = {
-		.channel = BCM_SR_GENPLL0_SATA_CLK,
+	[BCM_SR_GENPLL0_125M_CLK] = {
+		.channel = BCM_SR_GENPLL0_125M_CLK,
 		.flags = IPROC_CLK_AON,
 		.enable = ENABLE_VAL(0x4, 6, 0, 12),
 		.mdiv = REG_VAL(0x18, 0, 9),
@@ -102,6 +102,65 @@ static int sr_genpll0_clk_init(struct platform_device *pdev)
 	return 0;
 }
 
+static const struct iproc_pll_ctrl sr_genpll2 = {
+	.flags = IPROC_CLK_AON | IPROC_CLK_PLL_HAS_NDIV_FRAC |
+		IPROC_CLK_PLL_NEEDS_SW_CFG,
+	.aon = AON_VAL(0x0, 1, 13, 12),
+	.reset = RESET_VAL(0x0, 12, 11),
+	.dig_filter = DF_VAL(0x0, 4, 3, 0, 4, 7, 3),
+	.sw_ctrl = SW_CTRL_VAL(0x10, 31),
+	.ndiv_int = REG_VAL(0x10, 20, 10),
+	.ndiv_frac = REG_VAL(0x10, 0, 20),
+	.pdiv = REG_VAL(0x14, 0, 4),
+	.status = REG_VAL(0x30, 12, 1),
+};
+
+static const struct iproc_clk_ctrl sr_genpll2_clk[] = {
+	[BCM_SR_GENPLL2_NIC_CLK] = {
+		.channel = BCM_SR_GENPLL2_NIC_CLK,
+		.flags = IPROC_CLK_AON,
+		.enable = ENABLE_VAL(0x4, 6, 0, 12),
+		.mdiv = REG_VAL(0x18, 0, 9),
+	},
+	[BCM_SR_GENPLL2_TS_500_CLK] = {
+		.channel = BCM_SR_GENPLL2_TS_500_CLK,
+		.flags = IPROC_CLK_AON,
+		.enable = ENABLE_VAL(0x4, 7, 1, 13),
+		.mdiv = REG_VAL(0x18, 10, 9),
+	},
+	[BCM_SR_GENPLL2_125_NITRO_CLK] = {
+		.channel = BCM_SR_GENPLL2_125_NITRO_CLK,
+		.flags = IPROC_CLK_AON,
+		.enable = ENABLE_VAL(0x4, 8, 2, 14),
+		.mdiv = REG_VAL(0x18, 20, 9),
+	},
+	[BCM_SR_GENPLL2_CHIMP_CLK] = {
+		.channel = BCM_SR_GENPLL2_CHIMP_CLK,
+		.flags = IPROC_CLK_AON,
+		.enable = ENABLE_VAL(0x4, 9, 3, 15),
+		.mdiv = REG_VAL(0x1c, 0, 9),
+	},
+	[BCM_SR_GENPLL2_NIC_FLASH_CLK] = {
+		.channel = BCM_SR_GENPLL2_NIC_FLASH_CLK,
+		.flags = IPROC_CLK_AON,
+		.enable = ENABLE_VAL(0x4, 10, 4, 16),
+		.mdiv = REG_VAL(0x1c, 10, 9),
+	},
+	[BCM_SR_GENPLL2_FS4_CLK] = {
+		.channel = BCM_SR_GENPLL2_FS4_CLK,
+		.enable = ENABLE_VAL(0x4, 11, 5, 17),
+		.mdiv = REG_VAL(0x1c, 20, 9),
+	},
+};
+
+static int sr_genpll2_clk_init(struct platform_device *pdev)
+{
+	iproc_pll_clk_setup(pdev->dev.of_node,
+			    &sr_genpll2, NULL, 0, sr_genpll2_clk,
+			    ARRAY_SIZE(sr_genpll2_clk));
+	return 0;
+}
+
 static const struct iproc_pll_ctrl sr_genpll3 = {
 	.flags = IPROC_CLK_AON | IPROC_CLK_PLL_HAS_NDIV_FRAC |
 		IPROC_CLK_PLL_NEEDS_SW_CFG,
@@ -157,6 +216,30 @@ static const struct iproc_clk_ctrl sr_genpll4_clk[] = {
 		.enable = ENABLE_VAL(0x4, 6, 0, 12),
 		.mdiv = REG_VAL(0x18, 0, 9),
 	},
+	[BCM_SR_GENPLL4_TPIU_PLL_CLK] = {
+		.channel = BCM_SR_GENPLL4_TPIU_PLL_CLK,
+		.flags = IPROC_CLK_AON,
+		.enable = ENABLE_VAL(0x4, 7, 1, 13),
+		.mdiv = REG_VAL(0x18, 10, 9),
+	},
+	[BCM_SR_GENPLL4_NOC_CLK] = {
+		.channel = BCM_SR_GENPLL4_NOC_CLK,
+		.flags = IPROC_CLK_AON,
+		.enable = ENABLE_VAL(0x4, 8, 2, 14),
+		.mdiv = REG_VAL(0x18, 20, 9),
+	},
+	[BCM_SR_GENPLL4_CHCLK_FS4_CLK] = {
+		.channel = BCM_SR_GENPLL4_CHCLK_FS4_CLK,
+		.flags = IPROC_CLK_AON,
+		.enable = ENABLE_VAL(0x4, 9, 3, 15),
+		.mdiv = REG_VAL(0x1c, 0, 9),
+	},
+	[BCM_SR_GENPLL4_BRIDGE_FSCPU_CLK] = {
+		.channel = BCM_SR_GENPLL4_BRIDGE_FSCPU_CLK,
+		.flags = IPROC_CLK_AON,
+		.enable = ENABLE_VAL(0x4, 10, 4, 16),
+		.mdiv = REG_VAL(0x1c, 10, 9),
+	},
 };
 
 static int sr_genpll4_clk_init(struct platform_device *pdev)
@@ -181,18 +264,21 @@ static const struct iproc_pll_ctrl sr_genpll5 = {
 };
 
 static const struct iproc_clk_ctrl sr_genpll5_clk[] = {
-	[BCM_SR_GENPLL5_FS_CLK] = {
-		.channel = BCM_SR_GENPLL5_FS_CLK,
-		.flags = IPROC_CLK_AON,
+	[BCM_SR_GENPLL5_FS4_HF_CLK] = {
+		.channel = BCM_SR_GENPLL5_FS4_HF_CLK,
 		.enable = ENABLE_VAL(0x4, 6, 0, 12),
 		.mdiv = REG_VAL(0x18, 0, 9),
 	},
-	[BCM_SR_GENPLL5_SPU_CLK] = {
-		.channel = BCM_SR_GENPLL5_SPU_CLK,
-		.flags = IPROC_CLK_AON,
-		.enable = ENABLE_VAL(0x4, 6, 0, 12),
+	[BCM_SR_GENPLL5_CRYPTO_AE_CLK] = {
+		.channel = BCM_SR_GENPLL5_CRYPTO_AE_CLK,
+		.enable = ENABLE_VAL(0x4, 7, 1, 12),
 		.mdiv = REG_VAL(0x18, 10, 9),
 	},
+	[BCM_SR_GENPLL5_RAID_AE_CLK] = {
+		.channel = BCM_SR_GENPLL5_RAID_AE_CLK,
+		.enable = ENABLE_VAL(0x4, 8, 2, 14),
+		.mdiv = REG_VAL(0x18, 20, 9),
+	},
 };
 
 static int sr_genpll5_clk_init(struct platform_device *pdev)
@@ -214,24 +300,30 @@ static const struct iproc_pll_ctrl sr_lcpll0 = {
 };
 
 static const struct iproc_clk_ctrl sr_lcpll0_clk[] = {
-	[BCM_SR_LCPLL0_SATA_REF_CLK] = {
-		.channel = BCM_SR_LCPLL0_SATA_REF_CLK,
+	[BCM_SR_LCPLL0_SATA_REFP_CLK] = {
+		.channel = BCM_SR_LCPLL0_SATA_REFP_CLK,
 		.flags = IPROC_CLK_AON,
 		.enable = ENABLE_VAL(0x0, 7, 1, 13),
 		.mdiv = REG_VAL(0x14, 0, 9),
 	},
-	[BCM_SR_LCPLL0_USB_REF_CLK] = {
-		.channel = BCM_SR_LCPLL0_USB_REF_CLK,
+	[BCM_SR_LCPLL0_SATA_REFN_CLK] = {
+		.channel = BCM_SR_LCPLL0_SATA_REFN_CLK,
 		.flags = IPROC_CLK_AON,
 		.enable = ENABLE_VAL(0x0, 8, 2, 14),
 		.mdiv = REG_VAL(0x14, 10, 9),
 	},
-	[BCM_SR_LCPLL0_SATA_REFPN_CLK] = {
-		.channel = BCM_SR_LCPLL0_SATA_REFPN_CLK,
+	[BCM_SR_LCPLL0_SATA_350_CLK] = {
+		.channel = BCM_SR_LCPLL0_SATA_350_CLK,
 		.flags = IPROC_CLK_AON,
 		.enable = ENABLE_VAL(0x0, 9, 3, 15),
 		.mdiv = REG_VAL(0x14, 20, 9),
 	},
+	[BCM_SR_LCPLL0_SATA_500_CLK] = {
+		.channel = BCM_SR_LCPLL0_SATA_500_CLK,
+		.flags = IPROC_CLK_AON,
+		.enable = ENABLE_VAL(0x0, 10, 4, 16),
+		.mdiv = REG_VAL(0x18, 0, 9),
+	},
 };
 
 static int sr_lcpll0_clk_init(struct platform_device *pdev)
@@ -259,6 +351,18 @@ static const struct iproc_clk_ctrl sr_lcpll1_clk[] = {
 		.enable = ENABLE_VAL(0x0, 7, 1, 13),
 		.mdiv = REG_VAL(0x14, 0, 9),
 	},
+	[BCM_SR_LCPLL1_USB_REF_CLK] = {
+		.channel = BCM_SR_LCPLL1_USB_REF_CLK,
+		.flags = IPROC_CLK_AON,
+		.enable = ENABLE_VAL(0x0, 8, 2, 14),
+		.mdiv = REG_VAL(0x14, 10, 9),
+	},
+	[BCM_SR_LCPLL1_CRMU_TS_CLK] = {
+		.channel = BCM_SR_LCPLL1_CRMU_TS_CLK,
+		.flags = IPROC_CLK_AON,
+		.enable = ENABLE_VAL(0x0, 9, 3, 15),
+		.mdiv = REG_VAL(0x14, 20, 9),
+	},
 };
 
 static int sr_lcpll1_clk_init(struct platform_device *pdev)
@@ -298,6 +402,7 @@ static int sr_lcpll_pcie_clk_init(struct platform_device *pdev)
 
 static const struct of_device_id sr_clk_dt_ids[] = {
 	{ .compatible = "brcm,sr-genpll0", .data = sr_genpll0_clk_init },
+	{ .compatible = "brcm,sr-genpll2", .data = sr_genpll2_clk_init },
 	{ .compatible = "brcm,sr-genpll4", .data = sr_genpll4_clk_init },
 	{ .compatible = "brcm,sr-genpll5", .data = sr_genpll5_clk_init },
 	{ .compatible = "brcm,sr-lcpll0", .data = sr_lcpll0_clk_init },
diff --git a/include/dt-bindings/clock/bcm-sr.h b/include/dt-bindings/clock/bcm-sr.h
index cff6c6f..419011b 100644
--- a/include/dt-bindings/clock/bcm-sr.h
+++ b/include/dt-bindings/clock/bcm-sr.h
@@ -35,7 +35,7 @@
 
 /* GENPLL 0 clock channel ID SCR HSLS FS PCIE */
 #define BCM_SR_GENPLL0			0
-#define BCM_SR_GENPLL0_SATA_CLK		1
+#define BCM_SR_GENPLL0_125M_CLK		1
 #define BCM_SR_GENPLL0_SCR_CLK		2
 #define BCM_SR_GENPLL0_250M_CLK		3
 #define BCM_SR_GENPLL0_PCIE_AXI_CLK	4
@@ -50,9 +50,11 @@
 /* GENPLL 2 clock channel ID NITRO MHB*/
 #define BCM_SR_GENPLL2			0
 #define BCM_SR_GENPLL2_NIC_CLK		1
-#define BCM_SR_GENPLL2_250_NITRO_CLK	2
+#define BCM_SR_GENPLL2_TS_500_CLK	2
 #define BCM_SR_GENPLL2_125_NITRO_CLK	3
 #define BCM_SR_GENPLL2_CHIMP_CLK	4
+#define BCM_SR_GENPLL2_NIC_FLASH_CLK	5
+#define BCM_SR_GENPLL2_FS4_CLK		6
 
 /* GENPLL 3 HSLS clock channel ID */
 #define BCM_SR_GENPLL3			0
@@ -62,11 +64,16 @@
 /* GENPLL 4 SCR clock channel ID */
 #define BCM_SR_GENPLL4			0
 #define BCM_SR_GENPLL4_CCN_CLK		1
+#define BCM_SR_GENPLL4_TPIU_PLL_CLK	2
+#define BCM_SR_GENPLL4_NOC_CLK		3
+#define BCM_SR_GENPLL4_CHCLK_FS4_CLK	4
+#define BCM_SR_GENPLL4_BRIDGE_FSCPU_CLK	5
 
 /* GENPLL 5 FS4 clock channel ID */
 #define BCM_SR_GENPLL5			0
-#define BCM_SR_GENPLL5_FS_CLK		1
-#define BCM_SR_GENPLL5_SPU_CLK		2
+#define BCM_SR_GENPLL5_FS4_HF_CLK	1
+#define BCM_SR_GENPLL5_CRYPTO_AE_CLK	2
+#define BCM_SR_GENPLL5_RAID_AE_CLK	3
 
 /* GENPLL 6 NITRO clock channel ID */
 #define BCM_SR_GENPLL6			0
@@ -74,13 +81,16 @@
 
 /* LCPLL0  clock channel ID */
 #define BCM_SR_LCPLL0			0
-#define BCM_SR_LCPLL0_SATA_REF_CLK	1
-#define BCM_SR_LCPLL0_USB_REF_CLK	2
-#define BCM_SR_LCPLL0_SATA_REFPN_CLK	3
+#define BCM_SR_LCPLL0_SATA_REFP_CLK	1
+#define BCM_SR_LCPLL0_SATA_REFN_CLK	2
+#define BCM_SR_LCPLL0_SATA_350_CLK	3
+#define BCM_SR_LCPLL0_SATA_500_CLK	4
 
 /* LCPLL1  clock channel ID */
 #define BCM_SR_LCPLL1			0
 #define BCM_SR_LCPLL1_WAN_CLK		1
+#define BCM_SR_LCPLL1_USB_REF_CLK	2
+#define BCM_SR_LCPLL1_CRMU_TS_CLK	3
 
 /* LCPLL PCIE  clock channel ID */
 #define BCM_SR_LCPLL_PCIE		0
-- 
2.1.4

[PATCH 2/3] clk: bcm: Update and add tingray clock entries

[Ray Jui]

Update and add Stingray clock definitions and tables so they match the
binding document and the latest ASIC datasheet

Signed-off-by: Pramod Kumar <pramod.kumar@broadcom.com>
Signed-off-by: Ray Jui <ray.jui@broadcom.com>
---
 drivers/clk/bcm/clk-sr.c           | 135 ++++++++++++++++++++++++++++++++-----
 include/dt-bindings/clock/bcm-sr.h |  24 +++++--
 2 files changed, 137 insertions(+), 22 deletions(-)

diff --git a/drivers/clk/bcm/clk-sr.c b/drivers/clk/bcm/clk-sr.c
index adc74f4..7b9efc0 100644
--- a/drivers/clk/bcm/clk-sr.c
+++ b/drivers/clk/bcm/clk-sr.c
@@ -56,8 +56,8 @@ static const struct iproc_pll_ctrl sr_genpll0 = {
 };
 
 static const struct iproc_clk_ctrl sr_genpll0_clk[] = {
-	[BCM_SR_GENPLL0_SATA_CLK] = {
-		.channel = BCM_SR_GENPLL0_SATA_CLK,
+	[BCM_SR_GENPLL0_125M_CLK] = {
+		.channel = BCM_SR_GENPLL0_125M_CLK,
 		.flags = IPROC_CLK_AON,
 		.enable = ENABLE_VAL(0x4, 6, 0, 12),
 		.mdiv = REG_VAL(0x18, 0, 9),
@@ -102,6 +102,65 @@ static int sr_genpll0_clk_init(struct platform_device *pdev)
 	return 0;
 }
 
+static const struct iproc_pll_ctrl sr_genpll2 = {
+	.flags = IPROC_CLK_AON | IPROC_CLK_PLL_HAS_NDIV_FRAC |
+		IPROC_CLK_PLL_NEEDS_SW_CFG,
+	.aon = AON_VAL(0x0, 1, 13, 12),
+	.reset = RESET_VAL(0x0, 12, 11),
+	.dig_filter = DF_VAL(0x0, 4, 3, 0, 4, 7, 3),
+	.sw_ctrl = SW_CTRL_VAL(0x10, 31),
+	.ndiv_int = REG_VAL(0x10, 20, 10),
+	.ndiv_frac = REG_VAL(0x10, 0, 20),
+	.pdiv = REG_VAL(0x14, 0, 4),
+	.status = REG_VAL(0x30, 12, 1),
+};
+
+static const struct iproc_clk_ctrl sr_genpll2_clk[] = {
+	[BCM_SR_GENPLL2_NIC_CLK] = {
+		.channel = BCM_SR_GENPLL2_NIC_CLK,
+		.flags = IPROC_CLK_AON,
+		.enable = ENABLE_VAL(0x4, 6, 0, 12),
+		.mdiv = REG_VAL(0x18, 0, 9),
+	},
+	[BCM_SR_GENPLL2_TS_500_CLK] = {
+		.channel = BCM_SR_GENPLL2_TS_500_CLK,
+		.flags = IPROC_CLK_AON,
+		.enable = ENABLE_VAL(0x4, 7, 1, 13),
+		.mdiv = REG_VAL(0x18, 10, 9),
+	},
+	[BCM_SR_GENPLL2_125_NITRO_CLK] = {
+		.channel = BCM_SR_GENPLL2_125_NITRO_CLK,
+		.flags = IPROC_CLK_AON,
+		.enable = ENABLE_VAL(0x4, 8, 2, 14),
+		.mdiv = REG_VAL(0x18, 20, 9),
+	},
+	[BCM_SR_GENPLL2_CHIMP_CLK] = {
+		.channel = BCM_SR_GENPLL2_CHIMP_CLK,
+		.flags = IPROC_CLK_AON,
+		.enable = ENABLE_VAL(0x4, 9, 3, 15),
+		.mdiv = REG_VAL(0x1c, 0, 9),
+	},
+	[BCM_SR_GENPLL2_NIC_FLASH_CLK] = {
+		.channel = BCM_SR_GENPLL2_NIC_FLASH_CLK,
+		.flags = IPROC_CLK_AON,
+		.enable = ENABLE_VAL(0x4, 10, 4, 16),
+		.mdiv = REG_VAL(0x1c, 10, 9),
+	},
+	[BCM_SR_GENPLL2_FS4_CLK] = {
+		.channel = BCM_SR_GENPLL2_FS4_CLK,
+		.enable = ENABLE_VAL(0x4, 11, 5, 17),
+		.mdiv = REG_VAL(0x1c, 20, 9),
+	},
+};
+
+static int sr_genpll2_clk_init(struct platform_device *pdev)
+{
+	iproc_pll_clk_setup(pdev->dev.of_node,
+			    &sr_genpll2, NULL, 0, sr_genpll2_clk,
+			    ARRAY_SIZE(sr_genpll2_clk));
+	return 0;
+}
+
 static const struct iproc_pll_ctrl sr_genpll3 = {
 	.flags = IPROC_CLK_AON | IPROC_CLK_PLL_HAS_NDIV_FRAC |
 		IPROC_CLK_PLL_NEEDS_SW_CFG,
@@ -157,6 +216,30 @@ static const struct iproc_clk_ctrl sr_genpll4_clk[] = {
 		.enable = ENABLE_VAL(0x4, 6, 0, 12),
 		.mdiv = REG_VAL(0x18, 0, 9),
 	},
+	[BCM_SR_GENPLL4_TPIU_PLL_CLK] = {
+		.channel = BCM_SR_GENPLL4_TPIU_PLL_CLK,
+		.flags = IPROC_CLK_AON,
+		.enable = ENABLE_VAL(0x4, 7, 1, 13),
+		.mdiv = REG_VAL(0x18, 10, 9),
+	},
+	[BCM_SR_GENPLL4_NOC_CLK] = {
+		.channel = BCM_SR_GENPLL4_NOC_CLK,
+		.flags = IPROC_CLK_AON,
+		.enable = ENABLE_VAL(0x4, 8, 2, 14),
+		.mdiv = REG_VAL(0x18, 20, 9),
+	},
+	[BCM_SR_GENPLL4_CHCLK_FS4_CLK] = {
+		.channel = BCM_SR_GENPLL4_CHCLK_FS4_CLK,
+		.flags = IPROC_CLK_AON,
+		.enable = ENABLE_VAL(0x4, 9, 3, 15),
+		.mdiv = REG_VAL(0x1c, 0, 9),
+	},
+	[BCM_SR_GENPLL4_BRIDGE_FSCPU_CLK] = {
+		.channel = BCM_SR_GENPLL4_BRIDGE_FSCPU_CLK,
+		.flags = IPROC_CLK_AON,
+		.enable = ENABLE_VAL(0x4, 10, 4, 16),
+		.mdiv = REG_VAL(0x1c, 10, 9),
+	},
 };
 
 static int sr_genpll4_clk_init(struct platform_device *pdev)
@@ -181,18 +264,21 @@ static const struct iproc_pll_ctrl sr_genpll5 = {
 };
 
 static const struct iproc_clk_ctrl sr_genpll5_clk[] = {
-	[BCM_SR_GENPLL5_FS_CLK] = {
-		.channel = BCM_SR_GENPLL5_FS_CLK,
-		.flags = IPROC_CLK_AON,
+	[BCM_SR_GENPLL5_FS4_HF_CLK] = {
+		.channel = BCM_SR_GENPLL5_FS4_HF_CLK,
 		.enable = ENABLE_VAL(0x4, 6, 0, 12),
 		.mdiv = REG_VAL(0x18, 0, 9),
 	},
-	[BCM_SR_GENPLL5_SPU_CLK] = {
-		.channel = BCM_SR_GENPLL5_SPU_CLK,
-		.flags = IPROC_CLK_AON,
-		.enable = ENABLE_VAL(0x4, 6, 0, 12),
+	[BCM_SR_GENPLL5_CRYPTO_AE_CLK] = {
+		.channel = BCM_SR_GENPLL5_CRYPTO_AE_CLK,
+		.enable = ENABLE_VAL(0x4, 7, 1, 12),
 		.mdiv = REG_VAL(0x18, 10, 9),
 	},
+	[BCM_SR_GENPLL5_RAID_AE_CLK] = {
+		.channel = BCM_SR_GENPLL5_RAID_AE_CLK,
+		.enable = ENABLE_VAL(0x4, 8, 2, 14),
+		.mdiv = REG_VAL(0x18, 20, 9),
+	},
 };
 
 static int sr_genpll5_clk_init(struct platform_device *pdev)
@@ -214,24 +300,30 @@ static const struct iproc_pll_ctrl sr_lcpll0 = {
 };
 
 static const struct iproc_clk_ctrl sr_lcpll0_clk[] = {
-	[BCM_SR_LCPLL0_SATA_REF_CLK] = {
-		.channel = BCM_SR_LCPLL0_SATA_REF_CLK,
+	[BCM_SR_LCPLL0_SATA_REFP_CLK] = {
+		.channel = BCM_SR_LCPLL0_SATA_REFP_CLK,
 		.flags = IPROC_CLK_AON,
 		.enable = ENABLE_VAL(0x0, 7, 1, 13),
 		.mdiv = REG_VAL(0x14, 0, 9),
 	},
-	[BCM_SR_LCPLL0_USB_REF_CLK] = {
-		.channel = BCM_SR_LCPLL0_USB_REF_CLK,
+	[BCM_SR_LCPLL0_SATA_REFN_CLK] = {
+		.channel = BCM_SR_LCPLL0_SATA_REFN_CLK,
 		.flags = IPROC_CLK_AON,
 		.enable = ENABLE_VAL(0x0, 8, 2, 14),
 		.mdiv = REG_VAL(0x14, 10, 9),
 	},
-	[BCM_SR_LCPLL0_SATA_REFPN_CLK] = {
-		.channel = BCM_SR_LCPLL0_SATA_REFPN_CLK,
+	[BCM_SR_LCPLL0_SATA_350_CLK] = {
+		.channel = BCM_SR_LCPLL0_SATA_350_CLK,
 		.flags = IPROC_CLK_AON,
 		.enable = ENABLE_VAL(0x0, 9, 3, 15),
 		.mdiv = REG_VAL(0x14, 20, 9),
 	},
+	[BCM_SR_LCPLL0_SATA_500_CLK] = {
+		.channel = BCM_SR_LCPLL0_SATA_500_CLK,
+		.flags = IPROC_CLK_AON,
+		.enable = ENABLE_VAL(0x0, 10, 4, 16),
+		.mdiv = REG_VAL(0x18, 0, 9),
+	},
 };
 
 static int sr_lcpll0_clk_init(struct platform_device *pdev)
@@ -259,6 +351,18 @@ static const struct iproc_clk_ctrl sr_lcpll1_clk[] = {
 		.enable = ENABLE_VAL(0x0, 7, 1, 13),
 		.mdiv = REG_VAL(0x14, 0, 9),
 	},
+	[BCM_SR_LCPLL1_USB_REF_CLK] = {
+		.channel = BCM_SR_LCPLL1_USB_REF_CLK,
+		.flags = IPROC_CLK_AON,
+		.enable = ENABLE_VAL(0x0, 8, 2, 14),
+		.mdiv = REG_VAL(0x14, 10, 9),
+	},
+	[BCM_SR_LCPLL1_CRMU_TS_CLK] = {
+		.channel = BCM_SR_LCPLL1_CRMU_TS_CLK,
+		.flags = IPROC_CLK_AON,
+		.enable = ENABLE_VAL(0x0, 9, 3, 15),
+		.mdiv = REG_VAL(0x14, 20, 9),
+	},
 };
 
 static int sr_lcpll1_clk_init(struct platform_device *pdev)
@@ -298,6 +402,7 @@ static int sr_lcpll_pcie_clk_init(struct platform_device *pdev)
 
 static const struct of_device_id sr_clk_dt_ids[] = {
 	{ .compatible = "brcm,sr-genpll0", .data = sr_genpll0_clk_init },
+	{ .compatible = "brcm,sr-genpll2", .data = sr_genpll2_clk_init },
 	{ .compatible = "brcm,sr-genpll4", .data = sr_genpll4_clk_init },
 	{ .compatible = "brcm,sr-genpll5", .data = sr_genpll5_clk_init },
 	{ .compatible = "brcm,sr-lcpll0", .data = sr_lcpll0_clk_init },
diff --git a/include/dt-bindings/clock/bcm-sr.h b/include/dt-bindings/clock/bcm-sr.h
index cff6c6f..419011b 100644
--- a/include/dt-bindings/clock/bcm-sr.h
+++ b/include/dt-bindings/clock/bcm-sr.h
@@ -35,7 +35,7 @@
 
 /* GENPLL 0 clock channel ID SCR HSLS FS PCIE */
 #define BCM_SR_GENPLL0			0
-#define BCM_SR_GENPLL0_SATA_CLK		1
+#define BCM_SR_GENPLL0_125M_CLK		1
 #define BCM_SR_GENPLL0_SCR_CLK		2
 #define BCM_SR_GENPLL0_250M_CLK		3
 #define BCM_SR_GENPLL0_PCIE_AXI_CLK	4
@@ -50,9 +50,11 @@
 /* GENPLL 2 clock channel ID NITRO MHB*/
 #define BCM_SR_GENPLL2			0
 #define BCM_SR_GENPLL2_NIC_CLK		1
-#define BCM_SR_GENPLL2_250_NITRO_CLK	2
+#define BCM_SR_GENPLL2_TS_500_CLK	2
 #define BCM_SR_GENPLL2_125_NITRO_CLK	3
 #define BCM_SR_GENPLL2_CHIMP_CLK	4
+#define BCM_SR_GENPLL2_NIC_FLASH_CLK	5
+#define BCM_SR_GENPLL2_FS4_CLK		6
 
 /* GENPLL 3 HSLS clock channel ID */
 #define BCM_SR_GENPLL3			0
@@ -62,11 +64,16 @@
 /* GENPLL 4 SCR clock channel ID */
 #define BCM_SR_GENPLL4			0
 #define BCM_SR_GENPLL4_CCN_CLK		1
+#define BCM_SR_GENPLL4_TPIU_PLL_CLK	2
+#define BCM_SR_GENPLL4_NOC_CLK		3
+#define BCM_SR_GENPLL4_CHCLK_FS4_CLK	4
+#define BCM_SR_GENPLL4_BRIDGE_FSCPU_CLK	5
 
 /* GENPLL 5 FS4 clock channel ID */
 #define BCM_SR_GENPLL5			0
-#define BCM_SR_GENPLL5_FS_CLK		1
-#define BCM_SR_GENPLL5_SPU_CLK		2
+#define BCM_SR_GENPLL5_FS4_HF_CLK	1
+#define BCM_SR_GENPLL5_CRYPTO_AE_CLK	2
+#define BCM_SR_GENPLL5_RAID_AE_CLK	3
 
 /* GENPLL 6 NITRO clock channel ID */
 #define BCM_SR_GENPLL6			0
@@ -74,13 +81,16 @@
 
 /* LCPLL0  clock channel ID */
 #define BCM_SR_LCPLL0			0
-#define BCM_SR_LCPLL0_SATA_REF_CLK	1
-#define BCM_SR_LCPLL0_USB_REF_CLK	2
-#define BCM_SR_LCPLL0_SATA_REFPN_CLK	3
+#define BCM_SR_LCPLL0_SATA_REFP_CLK	1
+#define BCM_SR_LCPLL0_SATA_REFN_CLK	2
+#define BCM_SR_LCPLL0_SATA_350_CLK	3
+#define BCM_SR_LCPLL0_SATA_500_CLK	4
 
 /* LCPLL1  clock channel ID */
 #define BCM_SR_LCPLL1			0
 #define BCM_SR_LCPLL1_WAN_CLK		1
+#define BCM_SR_LCPLL1_USB_REF_CLK	2
+#define BCM_SR_LCPLL1_CRMU_TS_CLK	3
 
 /* LCPLL PCIE  clock channel ID */
 #define BCM_SR_LCPLL_PCIE		0
-- 
2.1.4

[PATCH 3/3] arm64: dts: Update Stingray clock DT nodes

[Ray Jui]

Update clock output names in the Stingray clock DT nodes so they match
the binding document and the latest ASIC datasheet. Also add entries
for LCPLL2

Signed-off-by: Pramod Kumar <pramod.kumar@broadcom.com>
Signed-off-by: Ray Jui <ray.jui@broadcom.com>
---
 .../boot/dts/broadcom/stingray/stingray-clock.dtsi | 26 ++++++++++++++++------
 1 file changed, 19 insertions(+), 7 deletions(-)

diff --git a/arch/arm64/boot/dts/broadcom/stingray/stingray-clock.dtsi b/arch/arm64/boot/dts/broadcom/stingray/stingray-clock.dtsi
index 3a4d452..10a106a 100644
--- a/arch/arm64/boot/dts/broadcom/stingray/stingray-clock.dtsi
+++ b/arch/arm64/boot/dts/broadcom/stingray/stingray-clock.dtsi
@@ -52,12 +52,24 @@
 			reg = <0x0001d104 0x32>,
 			      <0x0001c854 0x4>;
 			clocks = <&osc>;
-			clock-output-names = "genpll0", "clk_125", "clk_scr",
+			clock-output-names = "genpll0", "clk_125m", "clk_scr",
 					     "clk_250", "clk_pcie_axi",
 					     "clk_paxc_axi_x2",
 					     "clk_paxc_axi";
 		};
 
+		genpll2: genpll2@1d1ac {
+			#clock-cells = <1>;
+			compatible = "brcm,sr-genpll2";
+			reg = <0x0001d1ac 0x32>,
+			      <0x0001c854 0x4>;
+			clocks = <&osc>;
+			clock-output-names = "genpll2", "clk_nic",
+					     "clk_ts_500_ref", "clk_125_nitro",
+					     "clk_chimp", "clk_nic_flash",
+					     "clk_fs";
+		};
+
 		genpll3: genpll3@1d1e0 {
 			#clock-cells = <1>;
 			compatible = "brcm,sr-genpll3";
@@ -75,8 +87,8 @@
 			      <0x0001c854 0x4>;
 			clocks = <&osc>;
 			clock-output-names = "genpll4", "clk_ccn",
-					     "clk_tpiu_pll", "noc_clk",
-					     "pll_chclk_fs4",
+					     "clk_tpiu_pll", "clk_noc",
+					     "clk_chclk_fs4",
 					     "clk_bridge_fscpu";
 		};
 
@@ -86,8 +98,8 @@
 			reg = <0x0001d248 0x32>,
 			      <0x0001c870 0x4>;
 			clocks = <&osc>;
-			clock-output-names = "genpll5", "fs4_hf_clk",
-					     "crypto_ae_clk", "raid_ae_clk";
+			clock-output-names = "genpll5", "clk_fs4_hf",
+					     "clk_crypto_ae", "clk_raid_ae";
 		};
 
 		lcpll0: lcpll0@1d0c4 {
@@ -107,9 +119,9 @@
 			reg = <0x0001d138 0x3c>,
 			      <0x0001c870 0x4>;
 			clocks = <&osc>;
-			clock-output-names = "lcpll1", "clk_wanpn",
+			clock-output-names = "lcpll1", "clk_wan",
 					     "clk_usb_ref",
-					     "timesync_evt_clk";
+					     "clk_crmu_ts";
 		};
 
 		hsls_clk: hsls_clk {
-- 
2.1.4

[PATCH 3/3] arm64: dts: Update Stingray clock DT nodes

[Ray Jui]

Update clock output names in the Stingray clock DT nodes so they match
the binding document and the latest ASIC datasheet. Also add entries
for LCPLL2

Signed-off-by: Pramod Kumar <pramod.kumar@broadcom.com>
Signed-off-by: Ray Jui <ray.jui@broadcom.com>
---
 .../boot/dts/broadcom/stingray/stingray-clock.dtsi | 26 ++++++++++++++++------
 1 file changed, 19 insertions(+), 7 deletions(-)

diff --git a/arch/arm64/boot/dts/broadcom/stingray/stingray-clock.dtsi b/arch/arm64/boot/dts/broadcom/stingray/stingray-clock.dtsi
index 3a4d452..10a106a 100644
--- a/arch/arm64/boot/dts/broadcom/stingray/stingray-clock.dtsi
+++ b/arch/arm64/boot/dts/broadcom/stingray/stingray-clock.dtsi
@@ -52,12 +52,24 @@
 			reg = <0x0001d104 0x32>,
 			      <0x0001c854 0x4>;
 			clocks = <&osc>;
-			clock-output-names = "genpll0", "clk_125", "clk_scr",
+			clock-output-names = "genpll0", "clk_125m", "clk_scr",
 					     "clk_250", "clk_pcie_axi",
 					     "clk_paxc_axi_x2",
 					     "clk_paxc_axi";
 		};
 
+		genpll2: genpll2 at 1d1ac {
+			#clock-cells = <1>;
+			compatible = "brcm,sr-genpll2";
+			reg = <0x0001d1ac 0x32>,
+			      <0x0001c854 0x4>;
+			clocks = <&osc>;
+			clock-output-names = "genpll2", "clk_nic",
+					     "clk_ts_500_ref", "clk_125_nitro",
+					     "clk_chimp", "clk_nic_flash",
+					     "clk_fs";
+		};
+
 		genpll3: genpll3 at 1d1e0 {
 			#clock-cells = <1>;
 			compatible = "brcm,sr-genpll3";
@@ -75,8 +87,8 @@
 			      <0x0001c854 0x4>;
 			clocks = <&osc>;
 			clock-output-names = "genpll4", "clk_ccn",
-					     "clk_tpiu_pll", "noc_clk",
-					     "pll_chclk_fs4",
+					     "clk_tpiu_pll", "clk_noc",
+					     "clk_chclk_fs4",
 					     "clk_bridge_fscpu";
 		};
 
@@ -86,8 +98,8 @@
 			reg = <0x0001d248 0x32>,
 			      <0x0001c870 0x4>;
 			clocks = <&osc>;
-			clock-output-names = "genpll5", "fs4_hf_clk",
-					     "crypto_ae_clk", "raid_ae_clk";
+			clock-output-names = "genpll5", "clk_fs4_hf",
+					     "clk_crypto_ae", "clk_raid_ae";
 		};
 
 		lcpll0: lcpll0 at 1d0c4 {
@@ -107,9 +119,9 @@
 			reg = <0x0001d138 0x3c>,
 			      <0x0001c870 0x4>;
 			clocks = <&osc>;
-			clock-output-names = "lcpll1", "clk_wanpn",
+			clock-output-names = "lcpll1", "clk_wan",
 					     "clk_usb_ref",
-					     "timesync_evt_clk";
+					     "clk_crmu_ts";
 		};
 
 		hsls_clk: hsls_clk {
-- 
2.1.4

Re: [PATCH 2/3] clk: bcm: Update and add tingray clock entries

[Stephen Boyd]

Subject is missing an 's' on stringray?

Quoting Ray Jui (2018-05-25 09:45:16)
> Update and add Stingray clock definitions and tables so they match the
> binding document and the latest ASIC datasheet
> 
> Signed-off-by: Pramod Kumar <pramod.kumar@broadcom.com>
> Signed-off-by: Ray Jui <ray.jui@broadcom.com>

Otherwise it looks ok, but maybe Pramod should be the author?

Re: [PATCH 2/3] clk: bcm: Update and add tingray clock entries

[Stephen Boyd]

Subject is missing an 's' on stringray?

Quoting Ray Jui (2018-05-25 09:45:16)
> Update and add Stingray clock definitions and tables so they match the
> binding document and the latest ASIC datasheet
> 
> Signed-off-by: Pramod Kumar <pramod.kumar@broadcom.com>
> Signed-off-by: Ray Jui <ray.jui@broadcom.com>

Otherwise it looks ok, but maybe Pramod should be the author?

Re: [PATCH 2/3] clk: bcm: Update and add tingray clock entries

[Stephen Boyd]

Subject is missing an 's' on stringray?

Quoting Ray Jui (2018-05-25 09:45:16)
> Update and add Stingray clock definitions and tables so they match the
> binding document and the latest ASIC datasheet
> =

> Signed-off-by: Pramod Kumar <pramod.kumar@broadcom.com>
> Signed-off-by: Ray Jui <ray.jui@broadcom.com>

Otherwise it looks ok, but maybe Pramod should be the author?

[PATCH 2/3] clk: bcm: Update and add tingray clock entries

[Stephen Boyd]

Subject is missing an 's' on stringray?

Quoting Ray Jui (2018-05-25 09:45:16)
> Update and add Stingray clock definitions and tables so they match the
> binding document and the latest ASIC datasheet
> 
> Signed-off-by: Pramod Kumar <pramod.kumar@broadcom.com>
> Signed-off-by: Ray Jui <ray.jui@broadcom.com>

Otherwise it looks ok, but maybe Pramod should be the author?

Re: [PATCH 2/3] clk: bcm: Update and add tingray clock entries

[Ray Jui]

Hi Stephen,

On 5/30/2018 4:41 PM, Stephen Boyd wrote:
> Subject is missing an 's' on stringray?
>

Yes, will fix this.


> Quoting Ray Jui (2018-05-25 09:45:16)
>> Update and add Stingray clock definitions and tables so they match the
>> binding document and the latest ASIC datasheet
>>
>> Signed-off-by: Pramod Kumar <pramod.kumar@broadcom.com>
>> Signed-off-by: Ray Jui <ray.jui@broadcom.com>
> 
> Otherwise it looks ok, but maybe Pramod should be the author?
> 

Will fix this for all commits in this series.

I'll fix the above and send out v2.

Thanks,

Ray

[PATCH 2/3] clk: bcm: Update and add tingray clock entries

[Ray Jui]

Hi Stephen,

On 5/30/2018 4:41 PM, Stephen Boyd wrote:
> Subject is missing an 's' on stringray?
>

Yes, will fix this.


> Quoting Ray Jui (2018-05-25 09:45:16)
>> Update and add Stingray clock definitions and tables so they match the
>> binding document and the latest ASIC datasheet
>>
>> Signed-off-by: Pramod Kumar <pramod.kumar@broadcom.com>
>> Signed-off-by: Ray Jui <ray.jui@broadcom.com>
> 
> Otherwise it looks ok, but maybe Pramod should be the author?
> 

Will fix this for all commits in this series.

I'll fix the above and send out v2.

Thanks,

Ray

Re: [PATCH 2/3] clk: bcm: Update and add tingray clock entries

[Rob Herring]

On Fri, May 25, 2018 at 09:45:16AM -0700, Ray Jui wrote:
> Update and add Stingray clock definitions and tables so they match the
> binding document and the latest ASIC datasheet
> 
> Signed-off-by: Pramod Kumar <pramod.kumar@broadcom.com>
> Signed-off-by: Ray Jui <ray.jui@broadcom.com>
> ---
>  drivers/clk/bcm/clk-sr.c           | 135 ++++++++++++++++++++++++++++++++-----
>  include/dt-bindings/clock/bcm-sr.h |  24 +++++--

This goes in the 1st patch.

>  2 files changed, 137 insertions(+), 22 deletions(-)

[PATCH 2/3] clk: bcm: Update and add tingray clock entries

[Rob Herring]

On Fri, May 25, 2018 at 09:45:16AM -0700, Ray Jui wrote:
> Update and add Stingray clock definitions and tables so they match the
> binding document and the latest ASIC datasheet
> 
> Signed-off-by: Pramod Kumar <pramod.kumar@broadcom.com>
> Signed-off-by: Ray Jui <ray.jui@broadcom.com>
> ---
>  drivers/clk/bcm/clk-sr.c           | 135 ++++++++++++++++++++++++++++++++-----
>  include/dt-bindings/clock/bcm-sr.h |  24 +++++--

This goes in the 1st patch.

>  2 files changed, 137 insertions(+), 22 deletions(-)

Re: [PATCH 2/3] clk: bcm: Update and add tingray clock entries

[Ray Jui]

Hi Rob,

On 5/31/2018 9:25 AM, Rob Herring wrote:
> On Fri, May 25, 2018 at 09:45:16AM -0700, Ray Jui wrote:
>> Update and add Stingray clock definitions and tables so they match the
>> binding document and the latest ASIC datasheet
>>
>> Signed-off-by: Pramod Kumar <pramod.kumar@broadcom.com>
>> Signed-off-by: Ray Jui <ray.jui@broadcom.com>
>> ---
>>   drivers/clk/bcm/clk-sr.c           | 135 ++++++++++++++++++++++++++++++++-----
>>   include/dt-bindings/clock/bcm-sr.h |  24 +++++--
> 
> This goes in the 1st patch.

Please help to confirm. You want 1st patch and 2nd patch to be combined 
into a single patch?

Thanks.

> 
>>   2 files changed, 137 insertions(+), 22 deletions(-)

[PATCH 2/3] clk: bcm: Update and add tingray clock entries

[Ray Jui]

Hi Rob,

On 5/31/2018 9:25 AM, Rob Herring wrote:
> On Fri, May 25, 2018 at 09:45:16AM -0700, Ray Jui wrote:
>> Update and add Stingray clock definitions and tables so they match the
>> binding document and the latest ASIC datasheet
>>
>> Signed-off-by: Pramod Kumar <pramod.kumar@broadcom.com>
>> Signed-off-by: Ray Jui <ray.jui@broadcom.com>
>> ---
>>   drivers/clk/bcm/clk-sr.c           | 135 ++++++++++++++++++++++++++++++++-----
>>   include/dt-bindings/clock/bcm-sr.h |  24 +++++--
> 
> This goes in the 1st patch.

Please help to confirm. You want 1st patch and 2nd patch to be combined 
into a single patch?

Thanks.

> 
>>   2 files changed, 137 insertions(+), 22 deletions(-)

Re: [PATCH 2/3] clk: bcm: Update and add tingray clock entries

[Rob Herring]

On Fri, Jun 1, 2018 at 12:56 PM, Ray Jui <ray.jui@broadcom.com> wrote:
> Hi Rob,
>
> On 5/31/2018 9:25 AM, Rob Herring wrote:
>>
>> On Fri, May 25, 2018 at 09:45:16AM -0700, Ray Jui wrote:
>>>
>>> Update and add Stingray clock definitions and tables so they match the
>>> binding document and the latest ASIC datasheet
>>>
>>> Signed-off-by: Pramod Kumar <pramod.kumar@broadcom.com>
>>> Signed-off-by: Ray Jui <ray.jui@broadcom.com>
>>> ---
>>>   drivers/clk/bcm/clk-sr.c           | 135
>>> ++++++++++++++++++++++++++++++++-----
>>>   include/dt-bindings/clock/bcm-sr.h |  24 +++++--
>>
>>
>> This goes in the 1st patch.
>
>
> Please help to confirm. You want 1st patch and 2nd patch to be combined into
> a single patch?

No. include/dt-bindings/* is part of the DT binding, so it goes with
patch 1. The driver in patch 2.

Rob

[PATCH 2/3] clk: bcm: Update and add tingray clock entries

[Rob Herring]

On Fri, Jun 1, 2018 at 12:56 PM, Ray Jui <ray.jui@broadcom.com> wrote:
> Hi Rob,
>
> On 5/31/2018 9:25 AM, Rob Herring wrote:
>>
>> On Fri, May 25, 2018 at 09:45:16AM -0700, Ray Jui wrote:
>>>
>>> Update and add Stingray clock definitions and tables so they match the
>>> binding document and the latest ASIC datasheet
>>>
>>> Signed-off-by: Pramod Kumar <pramod.kumar@broadcom.com>
>>> Signed-off-by: Ray Jui <ray.jui@broadcom.com>
>>> ---
>>>   drivers/clk/bcm/clk-sr.c           | 135
>>> ++++++++++++++++++++++++++++++++-----
>>>   include/dt-bindings/clock/bcm-sr.h |  24 +++++--
>>
>>
>> This goes in the 1st patch.
>
>
> Please help to confirm. You want 1st patch and 2nd patch to be combined into
> a single patch?

No. include/dt-bindings/* is part of the DT binding, so it goes with
patch 1. The driver in patch 2.

Rob

Re: [PATCH 2/3] clk: bcm: Update and add tingray clock entries

[Ray Jui]

On 6/1/2018 12:02 PM, Rob Herring wrote:
> On Fri, Jun 1, 2018 at 12:56 PM, Ray Jui <ray.jui@broadcom.com> wrote:
>> Hi Rob,
>>
>> On 5/31/2018 9:25 AM, Rob Herring wrote:
>>>
>>> On Fri, May 25, 2018 at 09:45:16AM -0700, Ray Jui wrote:
>>>>
>>>> Update and add Stingray clock definitions and tables so they match the
>>>> binding document and the latest ASIC datasheet
>>>>
>>>> Signed-off-by: Pramod Kumar <pramod.kumar@broadcom.com>
>>>> Signed-off-by: Ray Jui <ray.jui@broadcom.com>
>>>> ---
>>>>    drivers/clk/bcm/clk-sr.c           | 135
>>>> ++++++++++++++++++++++++++++++++-----
>>>>    include/dt-bindings/clock/bcm-sr.h |  24 +++++--
>>>
>>>
>>> This goes in the 1st patch.
>>
>>
>> Please help to confirm. You want 1st patch and 2nd patch to be combined into
>> a single patch?
> 
> No. include/dt-bindings/* is part of the DT binding, so it goes with
> patch 1. The driver in patch 2.
> 
> Rob
> 

Okay got it. Thanks!

[PATCH 2/3] clk: bcm: Update and add tingray clock entries

[Ray Jui]

On 6/1/2018 12:02 PM, Rob Herring wrote:
> On Fri, Jun 1, 2018 at 12:56 PM, Ray Jui <ray.jui@broadcom.com> wrote:
>> Hi Rob,
>>
>> On 5/31/2018 9:25 AM, Rob Herring wrote:
>>>
>>> On Fri, May 25, 2018 at 09:45:16AM -0700, Ray Jui wrote:
>>>>
>>>> Update and add Stingray clock definitions and tables so they match the
>>>> binding document and the latest ASIC datasheet
>>>>
>>>> Signed-off-by: Pramod Kumar <pramod.kumar@broadcom.com>
>>>> Signed-off-by: Ray Jui <ray.jui@broadcom.com>
>>>> ---
>>>>    drivers/clk/bcm/clk-sr.c           | 135
>>>> ++++++++++++++++++++++++++++++++-----
>>>>    include/dt-bindings/clock/bcm-sr.h |  24 +++++--
>>>
>>>
>>> This goes in the 1st patch.
>>
>>
>> Please help to confirm. You want 1st patch and 2nd patch to be combined into
>> a single patch?
> 
> No. include/dt-bindings/* is part of the DT binding, so it goes with
> patch 1. The driver in patch 2.
> 
> Rob
> 

Okay got it. Thanks!